git.libre-soc.org Git - binutils-gdb.git/log

Add gdb.Objfile.progspace attribute.

gdb/ChangeLog:

* NEWS: Mention new gdb.Objfile.progspace attribute.
* python/py-objfile.c (objfpy_get_progspace): New function.
(objfile_getset): New entry for "progspace".

gdb/doc/ChangeLog:

* python.texi (Objfiles In Python): Document new progspace attribute.

gdb/testsuite/ChangeLog:

* gdb.python/py-objfile.exp: Test progspace attribute.

Fix mingw32 failures due to incorrect directory separator in pattern

Some testcases, mostly gdb.reverse ones, assume the presence of a
'/' directory separator before the source file name. This is
incorrect for mingw32 hosts, generating false failures for those
tests.

I attempted to catch most of the occurrences of the pattern
".*/$srcfile" and replaced them with ".*$srcfile". The latter
is used elsewhere in the testsuite. The resulting patch is attached.

I also see other occurrences of the same assumption throughout the
testsuite, but usually they are arguments for function calls and i
seem to recall either the test harness or GDB deals with those
paths properly.

gdb/testsuite:

2014-10-17 Luis Machado <lgustavo@codesourcery.com>

* gdb.guile/scm-breakpoint.exp: Do not assume any
directory separators when matching source file paths.
* gdb.python/py-breakpoint.exp: Likewise.
* gdb.reverse/break-precsave.exp: Likewise.
* gdb.reverse/break-reverse.exp: Likewise.
* gdb.reverse/consecutive-precsave.exp: Likewise.
* gdb.reverse/finish-precsave.exp: Likewise.
* gdb.reverse/finish-reverse-bkpt.exp: Likewise.
* gdb.reverse/finish-reverse.exp: Likewise.
* gdb.reverse/i386-precsave.exp: Likewise.
* gdb.reverse/i387-env-reverse.exp: Likewise.
* gdb.reverse/i387-stack-reverse.exp: Likewise.
* gdb.reverse/machinestate-precsave.exp: Likewise.
* gdb.reverse/machinestate.exp: Likewise.
* gdb.reverse/sigall-precsave.exp: Likewise.
* gdb.reverse/solib-precsave.exp: Likewise.
* gdb.reverse/step-precsave.exp: Likewise.
* gdb.reverse/until-precsave.exp: Likewise.
* gdb.reverse/watch-precsave.exp: Likewise.
* gdb.reverse/watch-reverse.exp: Likewise.

Copy xml files to host

When I run test with board file local-remote-host-native.exp, I see
the following warning,

$ make check RUNTESTFLAGS="--host_board=local-remote-host-native
--target_board=local-remote-host-native tdesc-arch.exp
HOST_DIR=/tmp/foo/"

(gdb) set tdesc filename ../../../../git/gdb/testsuite/gdb.xml/trivial.xml^M
warning: Could not open "../../../../git/gdb/testsuite/gdb.xml/trivial.xml"
(gdb) quit^

because "${srcdir}/gdb.xml/trivial.xml" doesn't exist on host. This
patch is to copy trivial.xml to host and the warning goes away.

(gdb) set tdesc filename /tmp/foo/trivial.xml^M
(gdb) quit^

tdesc-regs.exp has the similar problem that single-reg.xml may not
exist on host at all, and it should be copied to host too.

gdb/testsuite:

2014-10-17 Yao Qi <yao@codesourcery.com>

* lib/gdb.exp (gdb_skip_xml_test): Copy trivial.xml to host.
* gdb.xml/tdesc-regs.exp: Copy single-reg.xml to host.

PR gdb/17471: Repeating a background command makes it foreground

When we repeat a command, by just pressing <ret>, the input from the
previous command is reused for the new command invocation.

When an execution command strips the "&" out of its incoming argument
string, to detect background execution, we poke a '\0' directly to the
incoming argument string.

Combine both, and a repeat of a background command loses the "&".

This is actually only visible if args other than "&" are specified
(e.g., "c 1&" or "next 2&" or "c -a&"), as in the special case of "&"
alone (e.g. "c&") doesn't actually clobber the incoming string.

Fix this by making strip_bg_char return a new string instead of poking
a hole in the input string.

New test included.

Tested on x86_64 Fedora 20, native and gdbserver.

gdb/
2014-10-17  Pedro Alves  <palves@redhat.com>

PR gdb/17471
* infcmd.c (strip_bg_char): Change prototype and rewrite.  Now
returns a copy of the input.
(run_command_1, continue_command, step_1, jump_command)
(signal_command, until_command, advance_command, finish_command)
(attach_command): Adjust and install a cleanup to free the
stripped args.

gdb/testsuite/
2014-10-17  Pedro Alves  <palves@redhat.com>

PR gdb/17471
* gdb.base/bg-execution-repeat.c: New file.
* gdb.base/bg-execution-repeat.exp: New file.

PR gdb/17300: Input after "c -a" crashes readline/GDB

If all threads in the target were already running when the user does
"c -a", nothing puts the inferior's terminal settings in effect and
removes stdin from the event loop, which we must when running a
foreground command.  The result is that user input afterwards crashes
readline/gdb:

(gdb) start
Temporary breakpoint 1 at 0x4005d4: file continue-all-already-running.c, line 23.
Starting program: continue-all-already-running

Temporary breakpoint 1, main () at continue-all-already-running.c:23
23        sleep (10);
(gdb) c -a&
Continuing.
(gdb) c -a
Continuing.
p 1
readline: readline_callback_read_char() called with no handler!
Aborted (core dumped)
$

Backtrace:

Program received signal SIGABRT, Aborted.
0x0000003b36a35877 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56
56        return INLINE_SYSCALL (tgkill, 3, pid, selftid, sig);
(top-gdb) p 1
$1 = 1
(top-gdb) bt
#0  0x0000003b36a35877 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56
#1  0x0000003b36a36f68 in __GI_abort () at abort.c:89
#2  0x0000000000784aa9 in rl_callback_read_char () at readline/callback.c:116
#3  0x0000000000619181 in rl_callback_read_char_wrapper (client_data=0x0) at gdb/event-top.c:167
#4  0x0000000000619557 in stdin_event_handler (error=0, client_data=0x0) at gdb/event-top.c:373
#5  0x000000000061814a in handle_file_event (data=...) at gdb/event-loop.c:763
#6  0x0000000000617631 in process_event () at gdb/event-loop.c:340
#7  0x00000000006176f8 in gdb_do_one_event () at gdb/event-loop.c:404
#8  0x0000000000617748 in start_event_loop () at gdb/event-loop.c:429
#9  0x00000000006191b3 in cli_command_loop (data=0x0) at gdb/event-top.c:182
#10 0x000000000060f538 in current_interp_command_loop () at gdb/interps.c:318
#11 0x0000000000610701 in captured_command_loop (data=0x0) at gdb/main.c:323
#12 0x000000000060c3f5 in catch_errors (func=0x6106e6 <captured_command_loop>, func_args=0x0, errstring=0x9002c1 "", mask=RETURN_MASK_ALL)
     at gdb/exceptions.c:237
#13 0x0000000000611bff in captured_main (data=0x7fffffffd780) at gdb/main.c:1151
#14 0x000000000060c3f5 in catch_errors (func=0x610afe <captured_main>, func_args=0x7fffffffd780, errstring=0x9002c1 "", mask=RETURN_MASK_ALL)
     at gdb/exceptions.c:237
#15 0x0000000000611c28 in gdb_main (args=0x7fffffffd780) at gdb/main.c:1159
#16 0x000000000045ef97 in main (argc=5, argv=0x7fffffffd888) at gdb/gdb.c:32
(top-gdb)

Tested on x86_64 Fedora 20, native and gdbserver.

gdb/
2014-10-17  Pedro Alves  <palves@redhat.com>

PR gdb/17300
* infcmd.c (continue_1): If continuing all threads in the
foreground, make sure the inferior's terminal settings are put in
effect.

gdb/testsuite/
2014-10-17  Pedro Alves  <palves@redhat.com>

PR gdb/17300
* gdb.base/continue-all-already-running.c: New file.
* gdb.base/continue-all-already-running.exp: New file.

PR gdb/17472: With annotations, input while executing in the foreground crashes readline/GDB

Jan caught an intermittent GDB crash with the annota1.exp test:

Starting program: .../gdb/testsuite/gdb.base/annota1 ^M
[...]
FAIL: gdb.base/annota1.exp: run until main breakpoint (timeout)
[...]
readline: readline_callback_read_char() called with no handler!^M
ERROR: Process no longer exists

All we need to is to continue the inferior in the foreground, and type
a command while the inferior is running.  E.g.:

(gdb) set annotate 2

▒▒pre-prompt
(gdb)
▒▒prompt
c

▒▒post-prompt
Continuing.

▒▒starting

▒▒frames-invalid

*inferior is running now*

p 1<ret>

readline: readline_callback_read_char() called with no handler!
Aborted (core dumped)
$

When we run a foreground execution command we call
target_terminal_inferior to stop GDB from processing input, and to put
the inferior's terminal settings in effect.  Then we tell readline to
hide the prompt with display_gdb_prompt, which clears readline's input
callback too.  When the target stops, we call target_terminal_ours,
which re-installs stdin in the event loop, and then we redisplay the
prompt, reinstalling the readline callbacks.

However, when annotations are in effect, the "frames-invalid"
annotation code calls target_terminal_ours after 'resume' had already
called target_terminal_inferior:

(top-gdb) bt
#0  0x000000000056b82f in annotate_frames_invalid () at gdb/annotate.c:219
#1  0x000000000072e6cc in reinit_frame_cache () at gdb/frame.c:1705
#2  0x0000000000594bb9 in registers_changed_ptid (ptid=...) at gdb/regcache.c:612
#3  0x000000000064cca1 in target_resume (ptid=..., step=1, signal=GDB_SIGNAL_0) at gdb/target.c:2136
#4  0x00000000005f57af in resume (step=1, sig=GDB_SIGNAL_0) at gdb/infrun.c:2263
#5  0x00000000005f6051 in proceed (addr=18446744073709551615, siggnal=GDB_SIGNAL_DEFAULT, step=1) at gdb/infrun.c:2613

And then once we hide the prompt and remove readline's input handler
callback, we're in a bad state.  We end up with the target running
supposedly in the foreground, but with stdin still installed on the
event loop.  Any input then calls into readline, which aborts because
no rl_linefunc callback handler is installed:

Program received signal SIGABRT, Aborted.
0x0000003b36a35877 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56
56        return INLINE_SYSCALL (tgkill, 3, pid, selftid, sig);

(top-gdb) bt
#0  0x0000003b36a35877 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56
#1  0x0000003b36a36f68 in __GI_abort () at abort.c:89
During symbol reading, debug info gives source 9 included from file at zero line 0.
During symbol reading, debug info gives command-line macro definition with non-zero line 19: _STDC_PREDEF_H 1.
#2  0x0000000000784a25 in rl_callback_read_char () at src/readline/callback.c:116
#3  0x0000000000619111 in rl_callback_read_char_wrapper (client_data=0x0) at src/gdb/event-top.c:167
#4  0x00000000006194e7 in stdin_event_handler (error=0, client_data=0x0) at src/gdb/event-top.c:373
#5  0x00000000006180da in handle_file_event (data=...) at src/gdb/event-loop.c:763
#6  0x00000000006175c1 in process_event () at src/gdb/event-loop.c:340
#7  0x0000000000617688 in gdb_do_one_event () at src/gdb/event-loop.c:404
#8  0x00000000006176d8 in start_event_loop () at src/gdb/event-loop.c:429
#9  0x0000000000619143 in cli_command_loop (data=0x0) at src/gdb/event-top.c:182
#10 0x000000000060f4c8 in current_interp_command_loop () at src/gdb/interps.c:318
#11 0x0000000000610691 in captured_command_loop (data=0x0) at src/gdb/main.c:323
#12 0x000000000060c385 in catch_errors (func=0x610676 <captured_command_loop>, func_args=0x0, errstring=0x900241 "", mask=RETURN_MASK_ALL)
     at src/gdb/exceptions.c:237
#13 0x0000000000611b8f in captured_main (data=0x7fffffffd7b0) at src/gdb/main.c:1151
#14 0x000000000060c385 in catch_errors (func=0x610a8e <captured_main>, func_args=0x7fffffffd7b0, errstring=0x900241 "", mask=RETURN_MASK_ALL)
     at src/gdb/exceptions.c:237
#15 0x0000000000611bb8 in gdb_main (args=0x7fffffffd7b0) at src/gdb/main.c:1159
#16 0x000000000045ef57 in main (argc=3, argv=0x7fffffffd8b8) at src/gdb/gdb.c:32

The fix is to make the annotation code call target_terminal_inferior
again after printing, if the inferior's settings were in effect.

While at it, when we're doing output only, instead of
target_terminal_ours, we should call target_terminal_ours_for_output.
The latter doesn't actually remove stdin from the event loop, and also
leaves SIGINT forwarded to the target.

New test included.

Tested on x86_64 Fedora 20, native and gdbserver.

gdb/
2014-10-17  Pedro Alves  <palves@redhat.com>

PR gdb/17472
* annotate.c (annotate_breakpoints_invalid): Use
target_terminal_our_for_output instead of target_terminal_ours.
Give back the terminal to the target.
(annotate_frames_invalid): Likewise.

gdb/testsuite/
2014-10-17  Pedro Alves  <palves@redhat.com>

PR gdb/17472
* gdb.base/annota-input-while-running.c: New file.
* gdb.base/annota-input-while-running.exp: New file.

Make common code handle target_terminal_* idempotency

I found a place that should be giving back the terminal to the target,
but only if the target was already owning it.  So I need to add a
getter for who owns the terminal.

The trouble is that several places/target have their own globals to
track this state:

- inflow.c:terminal_is_ours
- remote.c:remote_async_terminal_ours_p
- linux-nat.c:async_terminal_is_ours
- go32-nat.c:terminal_is_ours

While one might think of adding a new target_ops method to query this,
conceptually, this state isn't really part of a particular target_ops.
Considering multi-target, the core shouldn't have to ask all targets
to know whether it's GDB that owns the terminal.  There's only one GDB
(or rather, only one top level interpreter).

So what this comment does is add a new global that is tracked by the
core instead.  A subsequent pass may later remove the other globals.

Tested on x86_64 Fedora 20, native and gdbserver.

gdb/
2014-10-17  Pedro Alves  <palves@redhat.com>

* target.c (enum terminal_state): New enum.
(terminal_state): New global.
(target_terminal_init): New function.
(target_terminal_inferior): Skip if inferior already owns the
terminal.
(target_terminal_ours, target_terminal_ours_for_output): New
functions.
* target.h (target_terminal_init): Convert to function prototype.
(target_terminal_ours_for_output): Convert to function prototype
and tweak comment.
(target_terminal_ours): Convert to function prototype and tweak
comment.
* windows-nat.c (do_initial_windows_stuff): Call
target_terminal_init instead of child_terminal_init_with_pgrp.

Fix ld tests with sysroot=/ and --enable-targets=all and test --print-sysroot

* ld-scripts/sysroot-prefix.exp: Log $ld_sysroot.  Handle sysroot
== "/" as a separate sysroot-configuration with separable
test-types.
(sysroot_prefix_tests): Include all existing sysroot tests in
sysroot == "/" tests except exclude those where a --sysroot option
is not specified.
* lib/ld-lib.exp (check_sysroot_available): Rewrite to use
--print-sysroot instead of relying on error code from using
--sysroot=...  Also, set $ld_sysroot.

The reason we exclude not just the failing "full-path =-prefixed
without" but also the passing "plain =-prefixed without but -Lpath"
for sysroot == "/" is that for the latter to succeed, we have to make
assumptions about the system not having a /sysroot directory or
assumptions about its contents etc.

When passing --enable-targets=all --enable-64-bit-bfd (the
latter not required for a "64-bit-host" of course) the ld --help
output got too much to handle for poor tcl (or maybe dejagnu is
to blame) and remote_exec exited with an error, so the
configuration being tested was mishandled as being a
sysroot-less configuration.  Using --version instead of --help
would work too, but the new --print-sysroot option calls for
nominal coverage, so why not use that instead.

Implement --print-sysroot in ld.

* ldlex.h (enum option_values): Add entry OPTION_PRINT_SYSROOT.
* lexsup.c (ld_options): Add entry for --print-sysroot.
(parse_args) <OPTION_PRINT_SYSROOT>: Print sysroot and exit early.

Delete Tru64 support

This commit does most of the mechanical removal.  IOW, the easy part.

procfs.c isn't touched beyond removing a couple obvious bits that are
guarded by a couple macros defined in config/alpha/nm-osf3.h.  Going
beyond that for procfs.c & co would be a harder excision that
potentially affects Solaris.

Some comments in the generic alpha code ABIs that may still be
relevant and I wouldn't know what to do with them.  That can always be
done on a separate pass, preferably by someone who can test on alpha.

A couple other spots have references to OSF/Tru64 and related files
being removed, but it felt like removing them would make things worse,
not better.  We can revisit those when we next need to touch that
code.

I didn't remove a reference to osf in testsuite/lib/future.exp, as I
believe that code is imported from DejaGNU.

Built and tested on x86_64 Fedora 20, with --enable-targets=all.

Tested that building for --target=alpha-osf3 on x86_64 Fedora 20
fails with:

checking for default auto-load directory... $debugdir:$datadir/auto-load
checking for default auto-load safe-path... $debugdir:$datadir/auto-load
*** Configuration alpha-unknown-osf3 is obsolete.
*** Support has been REMOVED.
make[1]: *** [configure-gdb] Error 1
make[1]: Leaving directory `build-osf'
make: *** [all] Error 2

gdb/
2014-10-17  Pedro Alves  <palves@redhat.com>

* Makefile.in (ALL_64_TARGET_OBS): Remove alpha-osf1-tdep.o.
(HFILES_NO_SRCDIR): Remove config/alpha/nm-osf3.h.
(ALLDEPFILES): Remove alpha-nat.c, alpha-osf1-tdep.c and
solib-osf.c.
* NEWS: Mention that support for alpha*-*-osf* has been removed.
* ada-lang.h [__alpha__ && __osf__]
(ADA_KNOWN_RUNTIME_FILE_NAME_PATTERNS): Delete.
* alpha-nat.c, alpha-osf1-tdep.c: Delete files.
* alpha-tdep.c (alpha_gdbarch_init): Remove reference to
GDB_OSABI_OSF1.
* config/alpha/alpha-osf3.mh, config/alpha/nm-osf3.h: Delete
files.
* config/djgpp/fnchange.lst (config/alpha/alpha-osf1.mh)
(config/alpha/alpha-osf2.mh, config/alpha/alpha-osf3.mh): Delete.
* configure: Regenerate.
* configure.ac: Remove references to osf.
* configure.host: Handle alpha*-*-osf* in the obsolete hosts
section.  Remove all other references to osf.
* configure.tgt: Add alpha*-*-osf* to the obsolete targets section.
Remove all other references to osf.
* dec-thread.c: Delete file.
* defs.h (GDB_OSABI_OSF1): Delete.
* inferior.h (START_INFERIOR_TRAPS_EXPECTED): New unconditionally
defined.
* osabi.c (gdb_osabi_names): Delete "OSF/1".
* procfs.c (procfs_debug_inferior) [PROCFS_DONT_TRACE_FAULTS]:
Delete code.
(unconditionally_kill_inferior)
[PROCFS_NEED_CLEAR_CURSIG_FOR_KILL]: Delete code.
* solib-osf.c: Delete file.

gdb/testsuite/
2014-10-17  Pedro Alves  <palves@redhat.com>

* gdb.base/callfuncs.exp: emove references to osf.
* gdb.base/sigall.exp: Likewise.
* gdb.gdb/selftest.exp: Likewise.
* gdb.hp/gdb.base-hp/callfwmall.exp: Likewise.
* gdb.mi/non-stop.c: Likewise.
* gdb.mi/pthreads.c: Likewise.
* gdb.reverse/sigall-precsave.exp: Likewise.
* gdb.reverse/sigall-reverse.exp: Likewise.
* gdb.threads/pthreads.c: Likewise.
* gdb.threads/pthreads.exp: Likewise.

gdb/doc/
2014-10-17  Pedro Alves  <palves@redhat.com>

* gdb.texinfo (Ada Tasks and Core Files): Delete mention of Tru64.
(SVR4 Process Information): Delete mention of OSF/1.

Fix build without libexpat

clear_threads_listing_context is used for thread listing methods other
than the xml based, but it's only defined when HAVE_LIBEXPAT is defined.

gdb/
2014-10-17 Pedro Alves <palves@redhat.com>

* remote.c (clear_threads_listing_context): Move higher up, out of
the HAVE_LIBEXPAT guard.

Don't check target_info exists noargs in commands.exp

I am confused by the noargs checking at each proc in commands.exp,

    if [target_info exists noargs] {
        verbose "Skipping progvar_simple_while_test because of noargs."
        return
    }
    gdb_test_no_output "set args 5" "set args in progvar_simple_while_test"
    if { ![runto factorial] } then { gdb_suppress_tests }
    # Don't depend upon argument passing, since most simulators don't
    # currently support it.  Bash value variable to be what we want.
    gdb_test "p value=5" ".*" "set value to 5 in progvar_simple_if_test #2"

They are conflicting to me.  If the argument passing can't be done on
the target, we skip this test, why do we still have to set value below?
On the other hand, the test case is compiled with -DFAKEARGV, it doesn't
get anything from argv[1], why do we need to skip it if noargs is true?

I don't find any useful clues from the git log, as the code is quite
old, predating import to sourceware cvs.  However, I find something
useful from the ChangeLog.

Thu Jul 20 13:28:36 1995  Jeffrey A. Law  <law@rtl.cygnus.com>

        .....
        * gdb.base/commands.exp: Protect tests which need arguments with
        $noargs conditionals.

Mon Apr 21 13:38:58 1997  Fred Fish  <fnf@cygnus.com>

        * gdb.base/run.c: Use FAKEARGV to build test executable that
        does not require a command line arg, since most simulators
        don't currently support passing such an arg into the simulated
        program.
        * gdb.base/commands.exp: Change tests to insert the proper
        value as the arg to the first recursive factorial call.  Change
        compilation line to define FAKEARGV at compile time.

Jeff added noargs checking as argument is passed to the inferior.  Then,
I presume Fred wanted to run this test on simulators which don't support
argument passing, and change the code not get input from argv.  (I guess)
noargs wasn't set in simulator board files at that moment.

Since Fred changed test to set input by gdb, instead of getting input
from argv, the test should be able to run on target doesn't support
argument passing, such as simulator and gdbserver.

This patch is to remove these checks to noargs and "set args".  I run
commands.exp with these board files, and no fail is found

- unix and native-gdbserver
- arm-none-eabi with qemu
- gdbserver on arm-linux-gnueabi with qemu

gdb/testsuite:

2014-10-17  Yao Qi  <yao@codesourcery.com>

* gdb.base/commands.exp (gdbvar_complex_if_while_test): Don't check
'target_info exists noargs'.
(test_command_prompt_position): Likewise.
(progvar_simple_if_test): Don't check 'target_info exists noargs'.
Remove "set args".
(progvar_simple_while_test): Likewise.
(progvar_complex_if_while_test): Likewise.
(if_while_breakpoint_command_test): Likewise.
(infrun_breakpoint_command_test): Likewise.
(breakpoint_command_test): Likewise.
(watchpoint_command_test): Likewise.
(bp_deleted_in_command_test): Likewise.
(temporary_breakpoint_commands): Likewise.

daily update

Use strtod instead of strtold in libiberty/d-demangle.c

strtold is currently used to decode templates which have a floating-point
value encoded inside; but this routine is not available on some systems,
such as Solaris 2.9 for instance.

This patch fixes the issue by replace the use of strtold by strtod.
It reduces a bit the precision, but it should still remain acceptable
in most cases.

libiberty/ChangeLog:

        * d-demangle.c: Replace strtold with strtod in global comment.
        (strtold): Remove declaration.
        (strtod): New declaration.
        (dlang_parse_real): Declare value as double instead of long
        double.  Replace call to strtold by call to strtod.
        Update format in call to snprintf.

Darwin: sanitize %gs and %fs values.

Some Darwin kernels return values out of bounds for gs and fs segments.
With this commit, they are masked to avoid garbage.

gdb/ChangeLog:
* i386-darwin-nat.c (i386_darwin_fetch_inferior_registers)
(i386_darwin_store_inferior_registers): Sanitize gs and fs values
on amd64.

Fix 17492, ld segfault with --oformat=binary

PR 17492
* elf32-arm.c (elf32_arm_add_symbol_hook): Only set has_gnu_symbols
on ELF output bfd.
* elf32-i386.c (elf_i386_add_symbol_hook): Likewise.
* elf32-m68k.c (elf_m68k_add_symbol_hook): Likewise.
* elf32-ppc.c (ppc_elf_add_symbol_hook): Likewise.
* elf32-sparc.c (elf32_sparc_add_symbol_hook): Likewise.
* elf64-ppc.c (ppc64_elf_add_symbol_hook): Likewise.
* elf64-sparc.c (elf64_sparc_add_symbol_hook): Likewise.
* elf64-x86-64.c (elf_x86_64_add_symbol_hook): Likewise.
* elfxx-aarch64.c (_bfd_aarch64_elf_add_symbol_hook): Likewise.
* elf-s390-common.c (elf_s390_add_symbol_hook): Likewise. Handle
STB_GNU_UNIQUE too.

Don't check noargs in remotetimeout.exp

The condition [target_info exists noargs] is checked when
remotetimeout.exp was added
https://sourceware.org/ml/gdb-patches/2005-02/msg00052.html

noargs means GDB does not support argument passing for inferior,
rather than doesn't support argument passing to GDB. remotetimeout.exp
passes -l to GDB only, doesn't pass any arguments to the inferior.

This patch is to remove such unnecessary checking, and
remotetimeout.exp then can be run with native-gdbserver board file.

gdb/testsuite:

2014-10-16 Yao Qi <yao@codesourcery.com>

* gdb.base/remotetimeout.exp: Remove noargs checking.

PR17488, powerpc64-linux-ld segfault

For binary ouput, we don't have an ELF bfd output so can't access
elf_elfheader. The elf64-ppc.c changes are really just a tidy,
triggered by looking at all places where the abiversion bits are
accessed.

bfd/
* elf64-ppc.c (ppc64_elf_before_check_relocs): Do .opd processing
even when output is not ppc64 ELF. Remove redundant tests on
type of input bfd.
ld/
PR 17488
* emultempl/ppc64elf.em (gld${EMULATION_NAME}_finish): Don't attempt
to access ELF header e_flags when not ppc64 ELF output.

daily update

Here we have the patch for gold aarch64 backend to support relaxation.

In short relaxation is the linker's generation of stubs that fixes the
out-of-range jumps/branches in the original object file.

With this implementation, we are able to link a 456MB aarch64 application.

Tested:
1) Build natively on x86_64 and aarch64 machines.
2) Pass unit tests regarding relaxation.

DEC threads: Simplify updating the thread list

Seems to me that we can simplify DEC thread's
target_update_thread_list implementation, avoiding the need to build
the array of GDB threads.

I have no way to test this, but then again support for Tru64 is about
to be removed.

Pushing anyway to have the last version in git be the cleanest one
should start from, if this file turns out to be resurrected in the
future.

gdb/
2014-10-15 Pedro Alves <palves@redhat.com>

* dec-thread.c (dec_thread_count_gdb_threads)
(dec_thread_add_gdb_thread): Delete.
(dec_thread_update_thread_list): Delete.
(dec_thread_find_new_threads): Rename to ...
(dec_thread_update_thread_list): ... this. Delete GDB-size
threads that are no longer found in dec_thread_list.
(resync_thread_list): Delete.
(dec_thread_wait): Call dec_thread_update_thread_list instead of
resync_thread_list.

remote: get rid of all the T packets when syncing the thread list

This commit avoids the prune_threads call in the remote target's
target_update_thread_list's implementation, eliminating all the "thread
alive" RSP traffic (one packet per thread) whenever we fetch the
thread list.

IOW, this:

Sending packet: $Tp2141.2150#82...Packet received: OK
Sending packet: $Tp2141.214f#b7...Packet received: OK
Sending packet: $Tp2141.2141#82...Packet received: OK
... more T packets; it's one per previously known live thread ...
Sending packet: $qXfer:threads:read::0,fff#03...Packet received: l<threads>\n<thread id="p2141.2141" core="2"/>\n<thread id="p2141.214f" core="1"/>\n<thread id="p2141.2150" core="2"/>\n</threads>\n

Becomes:

Sending packet: $qXfer:threads:read::0,fff#03...Packet received: l<threads>\n<thread id="p2141.2141" core="2"/>\n<thread id="p2141.214f" core="1"/>\n<thread id="p2141.2150" core="2"/>\n</threads>\n

Tested on x86_64 Fedora 20, native gdbserver:
  - tests the qXfer:threads:read method.

Tested on x86_64 Fedora 20, native gdbserver with qXfer:threads:read
force-disabled in gdbserver:
  - So that GDB falls back to the qfThreadInfo/qsThreadInfo method.

And also manually smoked tested force disabling both
qXfer:threads:read and qfThreadInfo/qsThreadInfo in gdbserver.

gdb/
2014-10-15  Pedro Alves  <palves@redhat.com>

* gdbthread.h (ALL_NON_EXITED_THREADS_SAFE): New macro.
* remote.c (remote_update_thread_list): Skip calling prune_threads
if any thread listing method is supported, and instead walk over
the set of remote threads listed, deleting those that are not
found in GDB's thread list.

Push pruning old threads down to the target

When GDB wants to sync the thread list with the target's (e.g., due to
"info threads"), it calls update_thread_list:

update_thread_list (void)
{
   prune_threads ();
   target_find_new_threads ();
   update_threads_executing ();
}

And then prune_threads does:

prune_threads (void)
{
   struct thread_info *tp, *next;

   for (tp = thread_list; tp; tp = next)
     {
       next = tp->next;
       if (!thread_alive (tp))
delete_thread (tp->ptid);
     }
}

Calling thread_live on each thread one by one is expensive.

E.g., on Linux, it ends up doing kill(SIG0) once for each thread.  Not
a big deal, but still a bunch of syscalls...

With the remote target, it's cumbersome.  That thread_alive call ends
up generating one T packet per thread:

Sending packet: $Tp2141.2150#82...Packet received: OK
Sending packet: $Tp2141.214f#b7...Packet received: OK
Sending packet: $Tp2141.2141#82...Packet received: OK
Sending packet: $qXfer:threads:read::0,fff#03...Packet received: l<threads>\n<thread id="p2141.2141" core="2"/>\n<thread id="p2141.214f" core="1"/>\n<thread id="p2141.2150" core="2"/>\n</threads>\n

That seems a bit silly when target_find_new_threads method
implementations will always fetch the whole current set of target
threads, and then add those that are not in GDB's thread list, to
GDB's thread list.

This patch thus pushes down the responsibility of pruning dead threads
to the target_find_new_threads method instead, so a target may
implement pruning dead threads however it wants.

Once we do that, target_find_new_threads becomes a misnomer, so the
patch renames it to target_update_thread_list.

The patch doesn't attempt to do any optimization to any target yet.
It simply exports prune_threads, and makes all implementations of
target_update_thread_list call that.  It's meant to be a no-op.

gdb/
2014-10-15  Pedro Alves  <palves@redhat.com>

* ada-tasks.c (print_ada_task_info, task_command_1): Adjust.
* bsd-uthread.c (bsd_uthread_find_new_threads): Rename to ...
(bsd_uthread_update_thread_list): ... this.  Call prune_threads.
(bsd_uthread_target): Adjust.
* corelow.c (core_open): Adjust.
* dec-thread.c (dec_thread_find_new_threads): Update comment.
(dec_thread_update_thread_list): New function.
(init_dec_thread_ops): Adjust.
* gdbthread.h (prune_threads): New declaration.
* linux-thread-db.c (thread_db_find_new_threads): Rename to ...
(thread_db_update_thread_list): ... this.  Call prune_threads.
(init_thread_db_ops): Adjust.
* nto-procfs.c (procfs_find_new_threads): Rename to ...
(procfs_update_thread_list): ... this.  Call prune_threads.
(procfs_attach, procfs_create_inferior, init_procfs_targets):
Adjust.
* obsd-nat.c (obsd_find_new_threads): Rename to ...
(obsd_update_thread_list): ... this.  Call prune_threads.
(obsd_add_target): Adjust.
* procfs.c (procfs_target): Adjust.
(procfs_notice_thread): Update comment.
(procfs_find_new_threads): Rename to ...
(procfs_update_thread_list): ... this.  Call prune_threads.
* ravenscar-thread.c (ravenscar_update_inferior_ptid): Update
comment.
(ravenscar_wait): Adjust.
(ravenscar_find_new_threads): Rename to ...
(ravenscar_update_thread_list): ... this.  Call prune_threads.
(init_ravenscar_thread_ops): Adjust.
* record-btrace.c (record_btrace_find_new_threads): Rename to ...
(record_btrace_update_thread_list): ... this.  Adjust comment.
(init_record_btrace_ops): Adjust.
* remote.c (remote_threads_info): Rename to ...
(remote_update_thread_list): ... this.  Call prune_threads.
(remote_start_remote, extended_remote_attach_1, init_remote_ops):
Adjust.
* sol-thread.c (check_for_thread_db): Adjust.
(sol_find_new_threads_callback): Rename to ...
(sol_update_thread_list_callback): ... this.
(sol_find_new_threads): Rename to ...
(sol_update_thread_list): ... this.  Call prune_threads.  Adjust.
(sol_get_ada_task_ptid, init_sol_thread_ops): Adjust.
* target-delegates.c: Regenerate.
* target.c (target_find_new_threads): Rename to ...
(target_update_thread_list): ... this.
* target.h (struct target_ops): Rename to_find_new_threads field
to to_update_thread_list.
(target_find_new_threads): Rename to ...
(target_update_thread_list): ... this.
* thread.c (prune_threads): Make extern.
(update_thread_list): Adjust.

Merge remote thread listing methods

We have three methods to list the current remote thread list:

1. The qXfer:threads:read method (the preferred one nowadays), builds a
remote thread list while parsing the XML, and then after the XML
parsing is done, goes over the built list and adds threads GDB doesn't
know about yet to GDB's list.

2. If the qXfer method isn't available, we fallback to using the
qfThreadInfo/qsThreadInfo packets.  When we do this, we adds threads
to GDB's list immediately as we parse the qfThreadInfo/qsThreadInfo
packet replies.

3. And then if the previous method isn't available either, we try the
old deprecated qL packet.  This path is already looking somewhat
broken for not using remote_notice_new_inferior to add threads to
GDB's list.

This patch makes all variants work in two passes, like the qXfer
method, and then makes all variants share the code path that adds
threads to GDB's list.

Tested on x86_64 Fedora 20 with native gdbserver.

gdb/
2014-10-15  Pedro Alves  <palves@redhat.com>

* remote.c (remote_get_threadlist, remote_threadlist_iterator):
Add describing comment.  Return -1 if the qL packet is not
supported.
(struct thread_item, thread_item_t): Move higher up in
the file.  Add comments.
(struct threads_parsing_context): Move higher up in
the file, add comments, and remote to ...
(struct threads_listing_context): ... this.
(remote_newthread_step): Don't add the thread to GDB's thread
database here.  Instead push it to the thread_listing_context
list.
(remote_find_new_threads): Rename to ...
(remote_get_threads_with_ql): ... this.  Add target_ops and
targets_listing_context parameters.  Pass down context.
(start_thread): Adjust.
(clear_threads_parsing_context): Rename to ...
(clear_threads_listing_context): ... this.
(remote_get_threads_with_qxfer): New, with parts salvaged from old
remote_threads_info.
(remote_get_threads_with_qthreadinfo): Ditto.
(remote_threads_info): Reimplement.

Non-stop + software single-step archs: don't force displaced-stepping for all single-steps

This finally reverts this bit of commit 929dfd4f:

  2009-07-31  Pedro Alves  <pedro@codesourcery.com>
      Julian Brown  <julian@codesourcery.com>

...
(resume): If this is a software single-stepping arch, and
displaced-stepping is enabled, use it for all single-step
requests.
...

That means that in non-stop (or really displaced-stepping) mode, on
software single-step archs - even those that only use sss breakpoints
to deal with atomic sequences, like PPC - if we have more than one
thread single-stepping, we'll always serialize the threads'
single-steps, as only one thread may be displaced stepping at a given
time, because there's only one scratch pad.

We originally did that because GDB didn't support having multiple
threads software-single-stepping simultaneously.  The previous patches
fixed that limitation, so we can now finally revert this too.

Tested on:

  - x86_64 Fedora 20, on top of the 'software single-step on x86'
    series.

gdb/
2014-10-15  Pedro Alves  <palves@redhat.com>

* infrun.c (resume): Don't force displaced-stepping for all
single-steps on software single-stepping archs.

Make single-step breakpoints be per-thread

This patch finally makes each thread have its own set of single-step
breakpoints.  This paves the way to have multiple threads software
single-stepping, though this patch doesn't flip that switch on yet.
That'll be done on a subsequent patch.

gdb/
2014-10-15  Pedro Alves  <palves@redhat.com>

* breakpoint.c (single_step_breakpoints): Delete global.
(insert_single_step_breakpoint): Adjust to store the breakpoint
pointer in the current thread.
(single_step_breakpoints_inserted, remove_single_step_breakpoints)
(cancel_single_step_breakpoints): Delete functions.
(breakpoint_has_location_inserted_here): Make extern.
(single_step_breakpoint_inserted_here_p): Adjust to walk the
breakpoint list.
* breakpoint.h (breakpoint_has_location_inserted_here): New
declaration.
(single_step_breakpoints_inserted, remove_single_step_breakpoints)
(cancel_single_step_breakpoints): Remove declarations.
* gdbthread.h (struct thread_control_state)
<single_step_breakpoints>: New field.
(delete_single_step_breakpoints)
(thread_has_single_step_breakpoints_set)
(thread_has_single_step_breakpoint_here): New declarations.
* infrun.c (follow_exec): Also clear the single-step breakpoints.
(singlestep_breakpoints_inserted_p, singlestep_ptid)
(singlestep_pc): Delete globals.
(infrun_thread_ptid_changed): Remove references to removed
globals.
(resume_cleanups): Delete the current thread's single-step
breakpoints.
(maybe_software_singlestep): Remove references to removed globals.
(resume): Adjust to use thread_has_single_step_breakpoints_set and
delete_single_step_breakpoints.
(init_wait_for_inferior): Remove references to removed globals.
(delete_thread_infrun_breakpoints): Delete the thread's
single-step breakpoints too.
(delete_just_stopped_threads_infrun_breakpoints): Don't delete
single-step breakpoints here.
(delete_stopped_threads_single_step_breakpoints): New function.
(adjust_pc_after_break): Adjust to use
thread_has_single_step_breakpoints_set.
(handle_inferior_event): Remove references to removed globals.
Use delete_stopped_threads_single_step_breakpoints.
(handle_signal_stop): Adjust to per-thread single-step
breakpoints.  Swap test order to do cheaper tests first.
(switch_back_to_stepped_thread): Extend debug output.  Remove
references to removed globals.
* record-full.c (record_full_wait_1): Adjust to per-thread
single-step breakpoints.
* thread.c (delete_single_step_breakpoints)
(thread_has_single_step_breakpoints_set)
(thread_has_single_step_breakpoint_here): New functions.
(clear_thread_inferior_resources): Also delete the thread's
single-step breakpoints.

thread.c: cleanup breakpoint deletion

A little refactoring to reduce duplicate code.

gdb/
2014-10-15 Pedro Alves <palves@redhat.com>

* thread.c (delete_thread_breakpoint): New function.
(delete_step_resume_breakpoint)
(delete_exception_resume_breakpoint): Use it.
(delete_at_next_stop): New function.
(clear_thread_inferior_resources): Use delete_at_next_stop.

Remove deprecated_insert_raw_breakpoint and friends

There are no users of deprecated_{insert,remove}_raw_breakpoint left.

gdb/
2014-10-15  Pedro Alves  <palves@redhat.com>

* breakpoint.c (regular_breakpoint_inserted_here_p): Inline ...
(breakpoint_inserted_here_p): ... here.  Remove special case for
software single-step breakpoints.
(find_non_raw_software_breakpoint_inserted_here): Inline ...
(software_breakpoint_inserted_here_p): ... here.  Remove special
case for software single-step breakpoints.
(bp_target_info_copy_insertion_state)
(deprecated_insert_raw_breakpoint)
(deprecated_remove_raw_breakpoint): Delete functions.
* breakpoint.h (deprecated_insert_raw_breakpoint)
(deprecated_remove_raw_breakpoint): Remove declarations.

Put single-step breakpoints on the bp_location chain

This patch makes single-step breakpoints "real" breakpoints on the
global location list.

There are several benefits to this:

- It removes the currently limitation that only 2 single-step
  breakpoints can be inserted.  See an example here of a discussion
  around a case that wants more than 2, possibly unbounded:

  https://sourceware.org/ml/gdb-patches/2014-03/msg00663.html

- makes software single-step work on read-only code regions.

  The logic to convert a software breakpoint to a hardware breakpoint
  if the memory map says the breakpoint address is in read only memory
  is in insert_bp_location.  Because software single-step breakpoints
  bypass all that go and straight to target_insert_breakpoint, we
  can't software single-step over read only memory.  This patch
  removes that limitation, and adds a test that makes sure that works,
  by forcing a code region to read-only with "mem LOW HIGH ro" and
  then stepping through that.

- Fixes PR breakpoints/9649

  This is an assertion failure in insert_single_step_breakpoint in
  breakpoint.c, because we may leave stale single-step breakpoints
  behind on error.

  The tests for stepping through read-only regions exercise the root
  cause of the bug, which is that we leave single-step breakpoints
  behind if we fail to insert any single-step breakpoint.  Deleting
  the single-step breakpoints in resume_cleanups,
  delete_just_stopped_threads_infrun_breakpoints, and
  fetch_inferior_event fixes this.  Without that, we'd no longer hit
  the assertion, as that code is deleted, but we'd instead run into
  errors/warnings trying to insert/remove the stale breakpoints on
  next resume.

- Paves the way to have multiple threads software single-stepping at
  the same time, leaving update_global_location_list to worry about
  duplicate locations.

- Makes the moribund location machinery aware of software single-step
  breakpoints, paving the way to enable software single-step on
  non-stop, instead of forcing serialized displaced stepping for all
  single steps.

- It's generaly cleaner.

  We no longer have to play games with single-step breakpoints
  inserted at the same address as regular breakpoints, like we
  recently had to do for 7.8.  See this discussion:

  https://sourceware.org/ml/gdb-patches/2014-06/msg00052.html.

Tested on x86_64 Fedora 20, on top of my 'single-step breakpoints on
x86' series.

gdb/
2014-10-15  Pedro Alves  <palves@redhat.com>

PR breakpoints/9649
* breakpoint.c (single_step_breakpoints, single_step_gdbarch):
Delete array globals.
(single_step_breakpoints): New global.
(breakpoint_xfer_memory): Remove special handling for single-step
breakpoints.
(update_breakpoints_after_exec): Delete bp_single_step
breakpoints.
(detach_breakpoints): Remove special handling for single-step
breakpoints.
(breakpoint_init_inferior): Delete bp_single_step breakpoints.
(bpstat_stop_status): Add comment.
(bpstat_what, bptype_string, print_one_breakpoint_location)
(adjust_breakpoint_address, init_bp_location): Handle
bp_single_step.
(new_single_step_breakpoint): New function.
(set_momentary_breakpoint, bkpt_remove_location): Remove special
handling for single-step breakpoints.
(insert_single_step_breakpoint, single_step_breakpoints_inserted)
(remove_single_step_breakpoints, cancel_single_step_breakpoints):
Rewrite.
(detach_single_step_breakpoints, find_single_step_breakpoint):
Delete functions.
(breakpoint_has_location_inserted_here): New function.
(single_step_breakpoint_inserted_here_p): Rewrite.
* breakpoint.h: Remove FIXME.
(enum bptype) <bp_single_step>: New enum value.
(insert_single_step_breakpoint): Update comment.
* infrun.c (resume_cleanups)
(delete_step_thread_step_resume_breakpoint): Remove single-step
breakpoints.
(fetch_inferior_event): Install a cleanup that removes infrun
breakpoints.
(switch_back_to_stepped_thread) <expect thread advanced also>:
Clear step-over info.

gdb/testsuite/
2014-10-15  Pedro Alves  <palves@redhat.com>

PR breakpoints/9649
* gdb.base/breakpoint-in-ro-region.c (main): Add more instructions.
* gdb.base/breakpoint-in-ro-region.exp
(probe_target_hardware_step): New procedure.
(top level): Probe hardware stepping and hardware breakpoint
support.  Test stepping through a read-only region, with both
"breakpoint auto-hw" on and off and both "always-inserted" on and
off.

infrun.c: add for_each_just_stopped_thread

This is a preparatory/cleanup patch that does two things:

- Renames 'delete_step_thread_step_resume_breakpoint'.  The
  "step_resume" part is misnomer these days, as the function deletes
  other kinds of breakpoints, not just the step-resume breakpoint.  A
  following patch will want to make it delete yet another kind of
  breakpoint, even.

- Splits out the logic of which threads get those breakpoints deleted
  to a separate "for_each"-style function, so that the same following
  patch may use it with a different callback.

Tested on x86_64 Fedora 20.

gdb/
2014-10-15  Pedro Alves  <palves@redhat.com>

* infrun.c (delete_step_resume_breakpoint_callback): Delete.
(delete_thread_infrun_breakpoints): New function, with parts
salvaged from delete_step_resume_breakpoint_callback.
(delete_step_thread_step_resume_breakpoint): Delete.
(for_each_just_stopped_thread_callback_func): New typedef.
(for_each_just_stopped_thread): New function.
(delete_just_stopped_threads_infrun_breakpoints): New function.
(delete_step_thread_step_resume_breakpoint_cleanup): Rename to ...
(delete_just_stopped_threads_infrun_breakpoints_cleanup):
... this.  Adjust.
(wait_for_inferior, fetch_inferior_event): Adjust to renames.

Rewrite non-continuable watchpoints handling

When GDB finds out the target triggered a watchpoint, and the target
has non-continuable watchpoints, GDB sets things up to step past the
instruction that triggered the watchpoint.  This is just like stepping
past a breakpoint, but goes through a different mechanism - it resumes
only the thread that needs to step past the watchpoint, but also
switches a "infwait state" global, that has the effect that the next
target_wait only wait for events only from that thread.

This forcing of a ptid to pass to target_wait obviously becomes a
bottleneck if we ever support stepping past different watchpoints
simultaneously (in separate processes).

It's also unnecessary -- the target should only return events for
threads that have been resumed; if no other thread than the one we're
stepping past the watchpoint has been resumed, then those other
threads should not report events.  If we couldn't assume that, then
stepping past regular breakpoints would be broken for not likewise
forcing a similar infwait_state.

So this patch eliminates infwait_state, and instead teaches keep_going
to mark step_over_info in a way that has the breakpoints module skip
inserting watchpoints (because we're stepping past one), like it skips
breakpoints when we're stepping past one.

Tested on:

- x86_64 Fedora 20 (continuable watchpoints)
- PPC64 Fedora 18  (non-steppable watchpoints)

gdb/
2014-10-15  Pedro Alves  <palves@redhat.com>

* breakpoint.c (should_be_inserted): Don't insert watchpoints if
trying to step past a non-steppable watchpoint.
* gdbthread.h (struct thread_info) <stepping_over_watchpoint>: New
field.
* infrun.c (struct step_over_info): Add new field
'nonsteppable_watchpoint_p' and adjust comments.
(set_step_over_info): New 'nonsteppable_watchpoint_p' parameter.
Adjust.
(clear_step_over_info): Clear nonsteppable_watchpoint_p as well.
(stepping_past_nonsteppable_watchpoint): New function.
(step_over_info_valid_p): Also return true if stepping past a
nonsteppable watchpoint.
(proceed): Adjust call to set_step_over_info.  Remove reference to
init_infwait_state.
(init_wait_for_inferior): Remove reference to init_infwait_state.
(waiton_ptid): Delete global.
(struct execution_control_state)
<stepped_after_stopped_by_watchpoint>: Delete field.
(wait_for_inferior, fetch_inferior_event): Always pass
minus_one_ptid to target_wait.
(init_thread_stepping_state): Clear 'stepping_over_watchpoint'
field.
(init_infwait_state): Delete function.
(handle_inferior_event): Remove infwait_state handling.
(handle_signal_stop) <watchpoints handling>: Adjust after
stepped_after_stopped_by_watchpoint removal.  Don't remove
breakpoints here nor set infwait_state.  Set the thread's
stepping_over_watchpoint flag, and call keep_going instead.
(keep_going): Handle stepping_over_watchpoint.  Adjust
set_step_over_info calls.
* infrun.h (stepping_past_nonsteppable_watchpoint): Declare
function.

Decide whether we may have removed breakpoints based on step_over_info

... instead of trap_expected.

Gets rid of one singlestep_breakpoints_inserted_p reference, and is
generally more to the point.

gdb/
2014-10-15 Pedro Alves <palves@redhat.com>

* infrun.c (step_over_info_valid_p): New function.
(resume): Use step_over_info_valid_p instead of checking the
threads's trap_expected flag.

gdbserver/win32: Rewrite debug registers handling

Don't use debug_reg_state for both:

* "intent" - what we want the debug registers to look like

* "reality" - what/which were the contents of the DR registers when
   the event triggered

Reserve it for the former only, like in the GNU/Linux port.

Otherwise the core x86 debug registers code can get confused if the
inferior itself changes the debug registers since GDB last set them.

This is also a requirement for being able to set watchpoints while the
target is running, if/when we get to it on Windows.  See the big
comment in x86_dr_stopped_data_address.

Seems to me this may also fixes propagating watchpoints to all threads
-- continue_one_thread only calls win32_set_thread_context (what
copies the DR registers to the thread), if something already fetched
the thread's context before.  Something else may be masking this
issue, I haven't checked.

Smoke tested by running gdbserver under Wine, connecting to it from
GNU/Linux, and checking that I could trigger a watchpoint as expected.

Joel tested it on x86-windows using AdaCore's testsuite.

gdb/gdbserver/
2014-10-15  Pedro Alves  <palves@redhat.com>

PR server/17487
* win32-arm-low.c (arm_set_thread_context): Remove current_event
parameter.
(arm_set_thread_context): Delete.
(the_low_target): Adjust.
* win32-i386-low.c (debug_registers_changed)
(debug_registers_used): Delete.
(update_debug_registers_callback): New function.
(x86_dr_low_set_addr, x86_dr_low_set_control): Mark all threads as
needing to update their debug registers.
(win32_get_current_dr): New function.
(x86_dr_low_get_addr, x86_dr_low_get_control)
(x86_dr_low_get_status): Fetch the debug register from the thread
record's context.
(i386_initial_stuff): Adjust.
(i386_get_thread_context): Remove current_event parameter.  Don't
clear debug_registers_changed nor copy DR values to
debug_reg_state.
(i386_set_thread_context): Delete.
(i386_prepare_to_resume): New function.
(i386_thread_added): Mark the thread as needing to update irs
debug registers.
(the_low_target): Remove i386_set_thread_context and install
i386_prepare_to_resume.
* win32-low.c (win32_get_thread_context): Adjust.
(win32_set_thread_context): Use SetThreadContext
directly.
(win32_prepare_to_resume): New function.
(win32_require_context): New function, factored out from ...
(thread_rec): ... this.
(continue_one_thread): Call win32_prepare_to_resume on each thread
we're about to continue.
(win32_resume): Call win32_prepare_to_resume on the event thread.
* win32-low.h (struct win32_thread_info)
<debug_registers_changed>: New field.
(struct win32_target_ops): Change prototype of set_thread_context,
delete set_thread_context and add prepare_to_resume.
(win32_require_context): New declaration.

PR python/17364

gdb/ChangeLog:

* python/lib/gdb/__init__.py (packages): Add "printer".
* python/lib/gdb/command/bound_registers.py: Moved to ...
* python/lib/gdb/printer/bound_registers.py: ... here.
Add printer to global set of builtin printers. Rename printer from
"bound" to "mpx_bound128".
* python/lib/gdb/printing.py (_builtin_pretty_printers): New global,
registered as global "builtin" printer.
(add_builtin_pretty_printer): New function.
* data-directory/Makefile.in (PYTHON_FILE_LIST): Update, and add
gdb/printer/__init__.py.

Remove d-support.c and use gdb_demangle for demangling D symbols.

gdb/ChangeLog

* Makefile.in (SFILES): Remove d-support.c.
(COMMON_OBS): Remove d-support.o.
* d-lang.h (d_parse_symbol): Remove declaration.
* d-lang.c (d_demangle): Use gdb_demangle to demangle D symbols.
* d-support.c: Remove file.

gdb/testsuite/ChangeLog

* gdb.dlang/demangle.exp: Update for demangling changes.

Remove non-address bits for longjmp resume breakpoint

On 32-bit S390 targets the longjmp target address "naturally" has the
most significant bit set.  That bit indicates the addressing mode and
is not part of the address itself.  Thus, in analogy with similar
cases (like when computing the caller PC in
insert_step_resume_breakpoint_at_caller), this change removes
non-address bits from the longjmp target address before using it as a
breakpoint address.

Note that there are two ways for determining the longjmp target
address: via a probe or via a gdbarch method.  This change only
affects the probe method, because it is assumed that the address
returned by the gdbarch method is usable as-is.

This change was tested together with a patch that enables longjmp
probes in glibc for S/390:

  https://sourceware.org/ml/libc-alpha/2014-10/msg00277.html

gdb/ChangeLog:

* gdb/infrun.c (process_event_stop_test): Apply
gdbarch_addr_bits_remove to longjmp resume address.

Delete gdb/regformats/microblaze.dat

This file:

- Isn't used by GDBserver currently.

- Isn't included in the WHICH list in features/Makefile, so hasn't
been regenerated to pick the latest microblaze or generic fixes.

Just delete it.

gdb/
2014-10-15 Pedro Alves <palves@redhat.com>

* regformats/microblaze.dat: Delete file.

Microblaze: Replace microblaze-expedite from pc to rpc

The Microblaze PC register is called "rpc", not "pc", as can be seen
in microblaze-core.xml. Fix this, so GDBserver can find the register in
the regcache.

gdb/
2014-10-15 Ajit Agarwal <ajitkum@xilinx.com>

* features/Makefile (microblaze-expedite): Replace pc with rpc.
* regformats/microblaze-with-stack-protect.dat: Regenerate.

Merge bfd_find_nearest_line variants

When bfd_find_nearest_line_discriminator was added, not enough care
was taken to ensure all targets had a proper definition of the function.
This patch cures that by merging bfd_find_nearest_line_discriminator
and bfd_find_nearest_line target implementations.

PR 17481
* aoutx.h (NAME (aout, find_nearest_line)): Add "discriminator_ptr"
param, group "section" and "offset" params.  Zero discriminator.
* bfd.c (bfd_find_nearest_line): Implement with new
_bfd_find_nearest_line.
(bfd_find_nearest_line_discriminator): Likewise.
* coff-i386.c (_bfd_generic_find_nearest_line_discriminator): Don't
define.
* coff-rs6000.c (xcoff_find_nearest_line,
xcoff_find_nearest_line_discriminator): Delete.
(_bfd_xcoff_find_nearest_line): Don't define.
(_bfd_xcoff_find_nearest_line): Define as coff_find_nearest_line.
* coff-x86_64.c (_bfd_generic_find_nearest_line_discriminator): Don't
define.
* coff64-rs6000.c (rs6000_xcoff64_vec, rs6000_xcoff64_aix_vec): Adjust.
* coffgen.c (coff_find_nearest_line_with_names): Reorder params,
adjust _bfd_dwarf2_find_nearest_line call.
(coff_find_nearest_line): Add "discriminator_ptr" param, reorder
others.  Set discriminator.  Adjust call.
(coff_find_nearest_line_discriminator): Delete.
* dwarf1.c (_bfd_dwarf1_find_nearest_line): Reorder params.
* dwarf2.c (find_line): Rename to..
(_bfd_dwarf2_find_nearest_line): ..this, reordering params.
Simplify setting of do_line.  Delete old function.
(_bfd_dwarf2_find_line): Delete.
* ecoff.c (_bfd_ecoff_find_nearest_line): Reorder params, add
discriminator_ptr and set it.
* elf-bfd.h (_bfd_elf_find_nearest_line): Update prototype.
(_bfd_elf_find_nearest_line_discriminator): Delete.
(_bfd_elf_find_line_discriminator): Delete.
(_bfd_generic_find_nearest_line_discriminator): Don't define.
* elf.c (elf_find_function): Reorder params.
(_bfd_elf_find_nearest_line): Reorder params, add discriminator_ptr.
Adjust calls.
(_bfd_elf_find_nearest_line_discriminator): Delete.
(_bfd_elf_find_line): Adjust call.
* elf32-arm.c (arm_elf_find_function): Reorder params.
(elf32_arm_find_nearest_line): Reorder params, add discriminator_ptr.
Adjust calls.
* elf64-alpha.c (elf64_alpha_find_nearest_line): Similarly.
* elfnn-aarch64.c (aarch64_elf_find_function): Reorder params.
(elfNN_aarch64_find_nearest_line): Reorder params, add
discriminator_ptr.  Adjust calls.
* elfxx-mips.c (_bfd_mips_elf_find_nearest_line): Similarly.
* elfxx-mips.h (_bfd_mips_elf_find_nearest_line): Update prototype.
* libaout.h (NAME (aout, find_nearest_line)): Update prototype.
* libbfd-in.h (_bfd_nosymbols_find_nearest_line): Update.
(_bfd_dwarf1_find_nearest_line): Likewise.
(_bfd_dwarf2_find_nearest_line): Likewise.
(_bfd_dwarf2_find_line): Delete.
(_bfd_generic_find_nearest_line_discriminator): Delete.
* libbfd.c (_bfd_generic_find_nearest_line_discriminator): Delete.
* libcoff-in.h (coff_find_nearest_line): Update prototype.
(coff_find_nearest_line_discriminator): Delete.
(coff_find_nearest_line_with_names): Update prototype.
* libecoff.h (_bfd_ecoff_find_nearest_line): Update prototype.
* mach-o.c (bfd_mach_o_find_nearest_line): Reorder params, add
discriminator_ptr.  Adjust calls.
* mach-o.h (bfd_mach_o_find_nearest_line): Update prototype.
* pdp11.c (NAME (aout, find_nearest_line)): Reorder params, add
discriminator_ptr and set.
* som.c (som_find_nearest_line): Similarly.
* targets.c (BFD_JUMP_TABLE_SYMBOLS): Delete entry for
_bfd_find_nearest_line_discriminator.
(struct bfd_target <_bfd_find_nearest_line>): Adjust prototype.
(struct bfd_target <_bfd_find_nearest_line_discriminator>): Delete.
* vms-alpha.c (_bfd_vms_find_nearest_dst_line): Rename to..
(_bfd_vms_find_nearest_line): ..this.  Reorder params, add
"discriminator" and set.
(_bfd_vms_find_nearest_line_discriminator): Delete.
(_bfd_generic_find_nearest_line_discriminator): Don't define.
(alpha_vms_find_nearest_line): Update define.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* libcoff.h: Regenerate.

Define bfd_find_line entry of BFD_JUMP_TABLE_SYMBOLS using NAME.

In https://www.sourceware.org/ml/binutils/2005-06/msg00082.html
HJ implemented bfd_find_line for DWARF2, but cheated a little in not
using the usual NAME##_find_line, saving quite a lot of boring
editing. However that shortcut probably contributed to
bfd_find_nearest_line_discriminator being implemented the same way,
and missing support for some targets.

* targets.c (BFD_JUMP_TABLE_SYMBOLS): Use NAME##_find_line.
* aout-adobe.c (aout_32_find_line): Define.
(aout_32_bfd_make_debug_symbol, aout_32_bfd_reloc_type_lookup,
aout_32_bfd_reloc_name_lookup): Define using _bfd_nosymbols define.
* aout-target.h (MY_find_line): Define.
* aout-tic30.c (MY_find_line): Define.
* binary.c (binary_find_line): Define.
* bout.c (aout_32_find_line): Define.
* coff-rs6000.c (_bfd_xcoff_find_line): Define.
* coff64-rs6000.c (rs6000_xcoff64_vec): Use coff_find_line.
(rs6000_xcoff64_aix_vec): Likewise.
* elf-bfd.h (_bfd_generic_find_line): Don't define.
* elfxx-target.h (bfd_elfNN_find_line): Define.
* i386msdos.c (msdos_find_line): Define.
* i386os9k.c (aout_32_find_line): Define.
* ieee.c (ieee_find_nearest_line, ieee_find_inliner_info): Delete func.
(ieee_find_nearest_line, ieee_find_line,
ieee_find_inliner_info): Define.
* ihex.c (ihex_find_line): Define.
* libbfd-in.h (_bfd_nosymbols_find_line): Define.
(_bfd_generic_find_line): Don't define.
* libbfd.c (_bfd_generic_find_line): Delete.
* libcoff-in.h (coff_find_line): Define.
* libecoff.h (_bfd_ecoff_find_line): Define.
* mach-o.h (bfd_mach_o_find_line): Define.
* mmo.c (mmo_find_line): Define.
* nlm-target.h (nlm_find_line): Define.
* oasys.c (oasys_find_nearest_line, oasys_find_inliner_info): Delete.
(oasys_find_nearest_line, oasys_find_line,
oasys_find_inliner_info): Define.
* pef.c (bfd_pef_find_line): Define.
* plugin.c (bfd_plugin_find_line): Define.
* ppcboot.c (ppcboot_find_line): Define.
* som.c (som_find_line): Define.
* srec.c (srec_find_line): Define.
* tekhex.c (tekhex_find_line): Define.
* versados.c (versados_find_line): Define.
* vms-alpha.c (alpha_vms_find_line): Define.
* xsym.c (bfd_sym_find_line): Define.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* libcoff.h: Regenerate.

Fix gnuv3_pass_by_reference to treat dynamic classes as non-trivial.

gdb/ChangeLog:

* gnu-v3-abi.c (gnuv3_pass_by_reference): Treat dynamic classes
as non-trivial.

Add new non-trial return value tests.

gdb/testsuite/ChangeLog:

* gdb.cp/non-trivial-retval.cc: Add new test cases.
* gdb.cp/non-trivial-retval.exp: Add new tests.

Fix gnuv3_pass_by_reference to lookup copy c-tors with qualified args.

Before this, a copy constructor declared as in the following snippet was
not being treated as a copy constructor.

class A
{
public:
  A (A &); // OK.
  A (const A &); // Not being treated as a copy constructor because of the
                 // 'const' qualifier.
};

gdb/ChangeLog:

PR c++/13403
PR c++/15154
* gnu-v3-abi.c (gnuv3_pass_by_reference): Lookup copy constructors
with qualified args.

Non trivial return value tests.

gdb/testsuite/ChangeLog:

PR c++/13403
PR c++/15154
* gdb.cp/non-trivial-retval.cc: New file.
* gdb.cp/non-trivial-retval.exp: New file.

Bump bfd version.

bfd/
2014-10-15  Tristan Gingold  <gingold@adacore.com>

* version.m4: Bump version to 2.25.51
* configure: Regenerate.

binutils/
2014-10-15  Tristan Gingold  <gingold@adacore.com>

* configure: Regenerate.

gas/
2014-10-15  Tristan Gingold  <gingold@adacore.com>

* configure: Regenerate.

gprof/
2014-10-15  Tristan Gingold  <gingold@adacore.com>

* configure: Regenerate.

ld/
2014-10-15  Tristan Gingold  <gingold@adacore.com>

* configure: Regenerate.

opcodes/
2014-10-15  Tristan Gingold  <gingold@adacore.com>

* configure: Regenerate.

src-release.sh: configure using --target.

* src-release.sh (do_proto_toplev): Configure with --target.

Fix py-parameter.exp for remote host

Test gdb.python/py-parameter.exp expects output "$srcdir/$subdir:\$cdir:\$cwd",
but proc gdb_reinitialize_dir doesn't set $srcdir/$subdir in search
directories on remote host because it doesn't exist on remote host.

proc gdb_reinitialize_dir { subdir } {
    global gdb_prompt

    if [is_remote host] {
return ""
    }

It causes the fail below:

(gdb) python print (gdb.parameter ('directories'))^M
/tmp/gdb:$cdir:$cwd^M
(gdb) FAIL: gdb.python/py-parameter.exp: python print (gdb.parameter ('directories'))

This patch is to fix this fail by not matching $srcdir/$subdir on remote host.

gdb/testsuite:

2014-10-15  Yao Qi  <yao@codesourcery.com>

* gdb.python/py-parameter.exp: Don't match $srcdir/$subdir on
remote host.

Fix file name matching on remote host.

I see the following fails in the remote host testing we do for mingw32
hosted GDB,

python print (symtab[1][0].symtab)^M
python.c^M
(gdb) FAIL: gdb.python/python.exp: Test decode_line current locationn filename

python print (symtab[1][0].symtab)^M
python.c^M
(gdb) FAIL: gdb.python/python.exp: Test decode_line python.c:26 filename

The test cases doesn't consider remote host and assumes that directory
on build also exists on host. In this patch, we only match file base
name if host is remote, otherwise, match file with dir name.

gdb/testsuite:

2014-10-15 Yao Qi <yao@codesourcery.com>

* gdb.python/py-symbol.exp: Match file base name if host is
remote, otherwise match file name with dir name.
* gdb.python/py-symtab.exp: Likewise.
* gdb.python/python.exp: Likewise.

Clean up gdb.python/ tests

This patch is to clean up various gdb.python/*.exp tests, such as
removing trailing ".*" from the pattern and fix one typo I find during
reading the code.

gdb/testsuite:

2014-10-15 Yao Qi <yao@codesourcery.com>

* gdb.python/python.exp: Remove trailing ".*". Fix typo
locationn.
* gdb.python/py-symbol.exp: Remove trailing ".*" in the
pattern.
* gdb.python/py-symtab.exp: Likewise.

Allow unquoted = as the first character in ldscript input_list names

* ldlex.l (INPUTLIST): New start condition.
(comment pattern, ",", "(", ")", "AS_NEEDED")
({FILENAMECHAR1}{FILENAMECHAR}*, "-l"{FILENAMECHAR}+)
(quoted string pattern, whitespace pattern): Add INPUTLIST to
valid start conditions.
(<INPUTLIST>"="{FILENAMECHAR1}{FILENAMECHAR}*): New NAME rule.
(ldlex_inputlist): New start-condition-setter function.
* ldgram.y (input_list1): Rename from input_list.  All recursive
use changed.
(input_list): New wrapper rule for input_list1, setting
INPUTLIST lexer state for the duration of parsing input_list1.

All this to say INPUT(=/path/to/file) and not be forced to use
INPUT("=/path/to/file") whenever there's a need to force a sysroot-
prefix.  Still, IMHO it seems better to make use of a previously
invalid syntax and not only change the meaning of quoted =-prefixed
paths (though arguably that's not very useful before this patchset).

This got a little bit hairier than I'd expected: I had to add a new
lexer state (aka. start condition) to avoid a first "=" being lexed as
the token "=", despite that not making sense in constructs expecting
file-names in the first place.  (The grammar doesn't allow for
expressions in any part of those lists.)  I guess I *could* have made
it work using that token anyway, but I didn't like the idea that you
would be able to separate the "=" from the rest of the file-name with
whitespace.

If "=" is the first character in a ldscript input file, force a sysroot prefix.

* ldlang.c (lang_add_input_file): If the first character in the
filename is '=', prepend the sysroot and force the context of that
input file to non-sysroot.

The "input_flags.sysrooted = 0" thing described in the comment is
covered by the testsuite part ("root-anchored =-prefixed script
inside"), but only observable for --with-sysroot configurations.

Add sysroot-prefix ld linker tests.

* ld-scripts/sysroot-prefix.exp, ld-scripts/sysroot-prefix-x.s,
ld-scripts/sysroot-prefix-y.s: New files.

N.B: full coverage is only possible with complementary use of
--with-sysroot when configuring.

lib/ld-lib.exp (check_sysroot_available): New proc.

ld.texinfo: "=" path-prefix forces sysroot in scripts not only SEARCH_DIR

* ld.texinfo (input files in linker scripts): When mentioning
behavior of first character "/" on scripts within sysroot, also
mention that effect can be forced by prefixing with "=" and
refer to SEARCH_DIR.

ld.texinfo: Clarify that sysroot affects "=" expansion.

* ld.texinfo (Options): When mentioning "=" and sysroot, mention
that --sysroot controls it, not only through the configuration.

ChangeLog typo fix

Fix memory overflow issue about strncat

If src contains n or more bytes, strncat() writes n+1 bytes to dest
(n from src plus the terminating null byte). Therefore, the size of
dest must be at least strlen(dest)+n+1.

* config/tc-tic4x.c (md_assemble): Correct strncat size.

daily update

[Ada] Error adding/subtracting pointer value to/from integral.

When trying to evaluate an expression which adds a pointer and
an integral, the evaluation succeeds if the pointer is on
the left handside of the operator, but not when it is on the right
handside:

    (gdb) p something'address + 0
    $1 = (system.address) 0x613418 <pck.something>
    (gdb) p 0 + something'address
    Argument to arithmetic operation not a number or boolean.

Same issue when doing subtractions:

    (gdb) p something'address - 0
    $2 = (system.address) 0x613418 <pck.something>
    (gdb) p 0 - something'address
    Argument to arithmetic operation not a number or boolean.

This patch enhances the Ada expression evaluator to handle
these two situations.

gdb/ChangeLog:

        * ada-lang.c (ada_evaluate_subexp) <BINOP_ADD>: Add handling
        of the case where the second operand is a pointer.
        <BINOP_SUB>: Likewise.

gdb/testsuite/ChangeLog:

        * gdb.ada/addr_arith: New testcase.

Tested on x86_64-linux.

gdb.dwarf2: Testsuite 64-bit pointer truncation fixes

* gdb.dwarf2/dw2-case-insensitive-debug.S: Handle 64-bit pointers.
* gdb.dwarf2/dw2-case-insensitive.exp: Update accordingly.
* gdb.dwarf2/dw2-skip-prologue.S: Handle 64-bit pointers.
* gdb.dwarf2/dw2-skip-prologue.exp: Update accordingly.

Only call {set,clear}_semaphore probe function if they are not NULL

This patch is a response to what I commented on:

  <https://sourceware.org/ml/gdb-patches/2014-10/msg00046.html>

When reviewing Jose's USDT probe support patches.  Basically, in his
patch he had to create dummy functions for the set_semaphore and the
clear_semaphore methods of probe_ops (gdb/probe.h), because those
functions were called inconditionally from inside gdb/breakpoint.c and
gdb/tracepoint.c.  However, the semaphore concept may not apply to all
types of probes, and this is the case here: USDT probes do not have
semaphores (although SDT probes do).

Anyway, this is a simple (almost obvious) patch to guard the call to
{set,clear}_semaphore.  It does not introduce any regression on a
Fedora 20 x86_64.

I will apply it in a few days in case there is no comment.

gdb/ChangeLog:
2014-10-14  Sergio Durigan Junior  <sergiodj@redhat.com>

* breakpoint.c (bkpt_probe_insert_location): Call set_semaphore
only if it is not NULL.
(bkpt_probe_remove_location): Likewise, for clear_semaphore.
* probe.h (struct probe_ops) <set_semaphore>: Update comment.
(struct probe_ops) <clear_semaphore>: Likewise.
* tracepoint.c (start_tracing): Call set_semaphore only if it is
not NULL.
(stop_tracing): Likewise, for clear_semaphore.

Explicitly use language_c when evaluating a SDT probe argument

Joel contacted me offlist with a question about a warning that one of
his customers was seeing.  The message came from the new
linker-debugger interface, which uses SDT probes internally.  The
warning said:

    (gdb) run
    [...]
    warning: Probes-based dynamic linker interface failed.
    Reverting to original interface.

    Argument to arithmetic operation not a number or boolean.

This should not have happened in the environment the customer was
using (RHEL-6.x), so I found it strange.  Another thing caught my
attention: the last message, saying "Argument to arithmetic operation
not a number or boolean.".

Joel kindly investigated the issue further, and found the answer for
this.  To quote him:

(gdb) set lang c
(gdb) p 48+$ebp
$4 = (void *) 0xffffd0f8

    So far so good. But...

(gdb) set lang ada
(gdb) p 48+$ebp
Argument to arithmetic operation not a number or boolean.

    Ooops! Interestingly, if you revert the order of the operands...

(gdb) p $ebp+48
$5 = (access void) 0xffffd0f8

So the problem is doing pointer arithmetics when the language is set
to Ada.

I remembered that, during the parsing and the evaluation of SDT probe
arguments, the code sets the language as current_language, because, at
that time, I thought it was not necessary to worry about the language
given that the code implements its own parser.  I was wrong.  So here
is a patch to fix that, by setting the language as C, which should
guarantee that the maths are done in the right way (TM).

It was somewhat hard to find a reproducer for this issue.  In the end,
what I had to do was to create a testcase that used the %ebp register
on some displacement (e.g., "-4(%ebp)"), which finally triggered the
bug.  I am not sure why I could not trigger it when using other
registers, but I did not want to spend too much time investigating
this issue, which seemed like an Ada issue.  Also, because of this
peculiar way to trigger the problem, the testcase only covers x86-like
targets (i.e., i*86 and x86_64 with -m32).

Joel kindly tested this for me, and it worked.  I also ran a full
regression test here on my Fedora 20 x86_64, and everything is fine.

I will push this patch in a few days if there are no comments.

gdb/ChangeLog:
2014-10-14  Sergio Durigan Junior  <sergiodj@redhat.com>

* stap-probe.c (stap_parse_argument): Initialize expout explicitly
using language_c, instead of current_language.

gdb/testsuite/ChangeLog:
2014-10-14  Sergio Durigan Junior  <sergiodj@redhat.com>

* gdb.arch/stap-eval-lang-ada.S: Likewise.
* gdb.arch/stap-eval-lang-ada.c: Likewise.
* gdb.arch/stap-eval-lang-ada.exp: New file.

Convert mov to lea only if r_offset >= 2

* elf32-i386.c (elf_i386_convert_mov_to_lea): Skip if relocation
offset is less than 2.
* elf64-x86-64.c (elf_x86_64_convert_mov_to_lea): Likewise.

Fix fail in mi-var-child.exp and mi-var-display.exp

Hi,
I see the following fails on arm-none-eabi target,

-var-list-children --simple-values struct_declarations  ^M
^done,numchild="11",children=[...,child={name="struct_declarations.func_ptr_struct",exp="func_ptr_struct",numchild="0",value="0x0 <_ftext>",type="struct _struct_decl (*)(int, char *, long)",thread-id="1"},child={name="struct_declarations.func_ptr_ptr",exp="func_ptr_ptr",numchild="0",value="0x0 <_ftext>",type="struct _struct_decl *(*)(int, char *, long)",thread-id="1"},...
(gdb) ^M
FAIL: gdb.mi/mi-var-child.exp: listing of children, simple types: names, type and values, complex types: names and types

-var-set-format weird.func_ptr_ptr natural^M
^done,format="natural",value="0x0 <_ftext>"^M
(gdb) ^M
FAIL: gdb.mi/mi-var-display.exp: set format variable weird.func_ptr_ptr in natural

In the test, "0x0" is expected, but "0x0 <_ftext>" is in the output.
Function pointers point to address zero, and tests assume there is no
symbol on address zero.  However, on my arm-none-eabi target, there is
a code symbol _ftext on address zero, and test fails.  Note that "set
print symbol off" doesn't take effect for function pointer.

int (*f) (void);
f = main;

(gdb) p f
$1 = (int (*)(void)) 0x8048400 <main>
(gdb) set print symbol off
(gdb) p f
$2 = (int (*)(void)) 0x8048400 <main>

In order to erase the difference, we can assign some function address
explicitly to function pointer, so the test behaves in a unique way.
In this patch, we assign nothing1 and nothing2 to function pointers
func_ptr_struct and func_ptr_ptr respectively, and update test as the
source file is changed.

gdb/testsuite:

2014-10-14  Yao Qi  <yao@codesourcery.com>

* gdb.mi/mi-var-child.c (nothing1): New function.
(nothing2): New function.
(do_children_tests): Set function pointers by nothing1 and
nothing2.
* gdb.mi/mi-var-child.exp: Step over new added statements.
Update test to match the new output.
* gdb.mi/var-cmd.c (nothing1): New function.
(nothing2): New function.
(do_children_tests): Set function pointers by  nothing1 and
nothing2.
* gdb.mi/mi-var-display.exp: Update test to match output.
Step to the line specified by $line_dct_nothing.
Increase the number of lines to step.

Use mi_varobj_update in mi-var-child.exp and mi2-var-child.exp

Hi,
I modify mi-var-child.exp and find that the pattern to match the output
of -var-update * is quite complicated.  However, it can be simplified by
using mi_varobj_update.  That is what this patch does.

gdb/testsuite:

2014-10-14  Yao Qi  <yao@codesourcery.com>

* gdb.mi/mi-var-child.exp: Use mi_varobj_update to simplify
tests.
* gdb.mi/mi2-var-child.exp: Likewise.

Add NEWS markers for 2.25.

binutils/
2014-10-14  Tristan Gingold  <gingold@adacore.com>

* NEWS: Add marker for 2.25.

gas/
2014-10-14  Tristan Gingold  <gingold@adacore.com>

* NEWS: Add marker for 2.25.

ld/
2014-10-14  Tristan Gingold  <gingold@adacore.com>

* NEWS: Add marker for 2.25.

Avoid undefined behaviour with signed expressions

PR 17453
bfd/
* libbfd.c (COERCE16, COERCE32, COERCE64): Use unsigned types.
(EIGHT_GAZILLION): Delete.
binutils/
* dwarf.c (read_leb128): Avoid signed overflow.
(read_debug_line_header): Likewise.
gas/
* config/tc-i386.c (fits_in_signed_long): Use unsigned param and
expression to avoid signed overflow.
(fits_in_signed_byte, fits_in_unsigned_byte, fits_in_unsigned_word,
fits_in_signed_word, fits_in_unsigned_long): Similarly.
* expr.c (operand <'-'>): Avoid signed overflow.
* read.c (s_comm_internal): Likewise.

Correct fscanf char field count

%<number>s as an fscanf format does not include the trailing NULL.
PATH_MAX does include the trailing NULL.

PR 17453
* readelf.c (process_program_headers): Correct fscanf format used
for interpreter.

sparc-aout and sparc-coff breakage

* config/tc-sparc.c (sparc_md_end): Fix unused variable warnings.

daily update

Change name of file name test in py-objfile.exp.

Tests should each have their own name.

gdb/testsuite/ChangeLog:

* gdb.python/py-objfile.exp: Change name of file name test.

Fix dw2-op-out-param.S CU offset values.

This test will pass if the CU is the first CU in the binary.
If libc debugging info is installed it may not be, in which case
the CU offset values are wrong.

gdb/testsuite/ChangeLog:

* gdb.dwarf2/dw2-op-out-param.S: Make DW_FORM_ref4 values be the offset
from the start of the CU.

fix file paths in previous commit

Remove some code duplication in py-objfile.c, py-progspace.c.

gdb/ChangeLog:

* py-objfile.c (objfpy_initialize): New function.
(objfpy_new, objfile_to_objfile_object): Call it.
* py-progspace.c (pspy_initialize): New function.
(pspy_new, pspace_to_pspace_object): Call it.

Run eh_frame optimisation for relocatable link

The idea here is to drop .eh_frame FDEs corresponding to dropped
comdat group sections or linkonce sections, but not perform changes in
encoding.

bfd/
PR 17467
* elf-eh-frame.c (ENSURE_NO_RELOCS): Don't stop at first NONE reloc.
(_bfd_elf_parse_eh_frame): When relocatable output, don't set
flags enabling conversion of CIEs and FDEs to use relative encoding.
(find_merged_cie): Similarly.
(_bfd_elf_write_section_eh_frame): Don't edit FDEs when
relocatable, except for CIE pointer.
* elflink.c (bfd_elf_reloc_symbol_deleted_p): Return true for
relocs against symbols in dropped comdat group sections.
(bfd_elf_discard_info): Do some eh_frame optimisation when
relocatable.
ld/
* ldlang.c (lang_add_section): Set up map_head.s and map_tail.s when
relocatable.

Fix "save breakpoints" for "catch" command

gdb/ChangeLog
2014-10-13  Miroslav Franc  <mfranc@redhat.com>
    Jan Kratochvil  <jan.kratochvil@redhat.com>

Fix "save breakpoints" for "catch" command.
* break-catch-sig.c (signal_catchpoint_print_recreate): Add trailing
newline.

gdb/testsuite/ChangeLog
2014-10-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
    Yao Qi  <yao@codesourcery.com>

Fix "save breakpoints" for "catch" command.
* gdb.base/catch-signal.exp: Add gdb_breakpoint "main".
Remove -nonewline.  Match also the added "main" line.

daily update

Fix "save breakpoints" for "disable $bpnum" command.

gdb/ChangeLog
2014-10-12  Miroslav Franc  <mfranc@redhat.com>

Fix "save breakpoints" for "disable $bpnum" command.
* breakpoint.c (save_breakpoints): Add $bpnum for disable.

gdb/testsuite/ChangeLog
2014-10-12  Jan Kratochvil  <jan.kratochvil@redhat.com>

Fix "save breakpoints" for "disable $bpnum" command.
* gdb.base/save-bp.c (main): Add label.
* gdb.base/save-bp.exp: Add 8th disabled breakpoint.  Match it.

Use gdb_test_sequence in gdb.base/save-bp.exp.

But IMO it is a functionality regression as:

* gdb_test_sequence permits arbitary number of lines of text between those
   lines being matched.  Former regex string did not allow it.
   This may make a difference if GDB regresses by printing some unexpected
   line after the breakpoint info line (like a "silent" line).

>  * \[\r\n\]+ can be used to anchor the beginning of the pattern, in the sense
>    of Perl regex ^ /m match.  At least I have found such cases in existing
>    *.exp files so I used that.  Using ^ really does not work.
>
>    But I am not aware how to do Perl regex $ /m match.  Using $ really does
>    not work.  But this means that for example the trailing
>      ( \$(host|target) evals\$)?
>    on the line
>      "\[\r\n\]+\[ \t\]+stop only if i == 1( \$(host|target) evals\$)?"
>    originally made sense there but now it can be removed as it has no longer
>    any functionality there - it will match now any trailing line garbage.

by Yao Qi:

In this test case, ( \$(host|target) evals\$)? isn't needed in the
pattern.  What we test here is to save breakpoints into file and restore
them from file.  The contents saved in file are:

break save-bp.c:31
  condition $bpnum i == 1

the information about the place where the condition is evaluated isn't
saved, so we don't need to check.  Breakpoint save and restore has
nothing to do with where the condition is evaluated (host or target).  I
am fine to leave it here now.

gdb/testsuite/ChangeLog
2014-10-09  Jan Kratochvil  <jan.kratochvil@redhat.com>

* gdb.base/save-bp.exp (info break): Use gdb_test_sequence.

daily update

Sync libiberty with upstream GCC.

include/ChangeLog
* libiberty.h (PEX_STDOUT_APPEND): New flag.
(PEX_STDERR_APPEND): Likewise.

* demangle.h (DMGL_DLANG): New macro.
(DMGL_STYLE_MASK): Add DMGL_DLANG.
(demangling_styles): Add dlang_demangling.
(DLANG_DEMANGLING_STYLE_STRING): New macro.
(DLANG_DEMANGLING): New macro.
(dlang_demangle): New prototype.

* longlong.h: Add __udiv_w_sdiv prototype.

libiberty/ChangeLog
* cp-demangle.c (d_substitution): Handle abi tags on abbreviation.

* pex-common.h (struct pex_funcs): Add new parameter for open_write field.
* pex-unix.c (pex_unix_open_write): Add support for new parameter.
* pex-djgpp.c (pex_djgpp_open_write): Likewise.
* pex-win32.c (pex_win32_open_write): Likewise.
* pex-common.c (pex_run_in_environment): Likewise.

* Makefile.in (CFILES): Add d-demangle.c.
(REQUIRED_OFILES): Add d-demangle.o.
* cplus-dem.c (libiberty_demanglers): Add dlang_demangling case.
(cplus_demangle): Likewise.
* d-demangle.c: New file.
* testsuite/Makefile.in (really-check): Add check-d-demangle.
* testsuite/d-demangle-expected: New file.

* simple-object-elf.c (simple_object_elf_write_ehdr): Correctly
handle objects with more than SHN_LORESERVE sections.
(simple_object_elf_write_shdr): Add sh_link parameter.
(simple_object_elf_write_to_file): Correctly handle objects with
more than SHN_LORESERVE sections.

* cp-demangle.c (d_dump): Only access field from s_fixed part of
the union for DEMANGLE_COMPONENT_FIXED_TYPE.
(d_count_templates_scopes): Likewise.

* testsuite/demangler-fuzzer.c: New file.
* testsuite/Makefile.in (fuzz-demangler): New rule.
(demangler-fuzzer): Likewise.
(mostlyclean): Clean up demangler fuzzer.

Enable qTStatus packet in case it is disabled

Nowadays, we are using command "tstatus" to send a packet to GDBserver
in order to check the connection.  However, on the target doesn't
support tracepoint, the following error is emitted before sending any
packet to GDBserver.

tstatus^M
Trace can not be run on this target.^M
(gdb) FAIL: gdb.server/server-kill.exp: tstatus

qTStatus is disabled after receiving the empty reply during connecting
to the remote target.  When the test executes command "tstatus" again,
remote_get_trace_status returns -1 at the very beginning, and no RSP
packet is sent out.

This patch is to enable qTStatus packet again.

gdb/testsuite:

2014-10-11  Yao Qi  <yao@codesourcery.com>

* gdb.server/server-kill.exp: Execute command
"set remote trace-status-packet on" before "tstatus".

Get GDBserver pid on remote target

Hi,
We see the following fail in the real remote testing...

(gdb) Executing on target: kill -9 29808    (timeout = 300)
spawn [open ...]^M
sh: 1: kill: No such process

The test tries to kill gdbserver in this way:

set server_pid [exp_pid -i [board_info target fileid]]
remote_exec target "kill -9 $server_pid"

in native testing, we'll get the pid of spawned gdbserver, however, in
remote testing, we'll get the pid of ssh session, since we start
gdbserver on the remote target through ssh.  The pid on build doesn't
exist on target.

In this patch, we tweak server-kill.c to get the parent pid, which is
the pid of GDBserver.  GDB gets it and kill GDBserver on target.

gdb/testsuite:

2014-10-11  Yao Qi  <yao@codesourcery.com>

* gdb.server/server-kill.c: Include sys/types.h and unistd.h.
(main): Call getppid.
* gdb.server/server-kill.exp: Set breakpoint on line "i = 0;"
and continue to it.  Read variable "server_pid".

Clean up server-kill.exp

This patch is to remove some lines which looks unnecessary.  These
lines were added when server-kill.exp was added.  In the version 1,
https://sourceware.org/ml/gdb-patches/2013-03/msg00691.html the test
calls runto_main and delete breakpoint on main,

+if ![runto_main] {
+    return -1
+}
+
+# Otherwise the breakpoint at 'main' would not cause insert
breakpoints during
+# first step.
+delete_breakpoints

However, in the version 2
https://sourceware.org/ml/gdb-patches/2013-03/msg00854.html runto_main
is removed but delete_breakpoints is still there.  AFAICS, the line of
delete_breakpoints can be removed too.

gdb/testsuite:

2014-10-11  Yao Qi  <yao@codesourcery.com>

* gdb.server/server-kill.exp: Remove "delete_breakpoints".

No longer pull thread list explicitly

As the result of the patch below, GDB updates thread list when a stop is
presented to user.  The tests don't have to fetch thread list explicitly.

  [PATCH 3/3] Fix non-stop regressions caused by "breakpoints always-inserted off" changes
  https://sourceware.org/ml/gdb-patches/2014-09/msg00734.html

This patch is to remove the test code updating thread list.

Run these three tests many times on arm-linux-gnueabi and x86-linux.
No regressions.

gdb/testsuite:

2014-10-11  Yao Qi  <yao@codesourcery.com>

* gdb.threads/thread-find.exp: Don't execute command
"info threads".
* gdb.threads/attach-into-signal.exp (corefunc): Likewise.
* gdb.threads/linux-dp.exp: Don't check the condition
$threads_created equals to zero.

daily update

Delete IRIX support

This does most of the mechanical removal.  IOW, the easy part.

This doesn't touch procfs.c as that'd be a harder excision,
potentially affecting Solaris.

mips-tdep.c is left alone.  E.g., I didn't delete the GDB_OSABI_IRIX
enum value, nor references to it in mips-tdep.c.  Some comments
mentioning IRIX ABIs may still be relevant and I wouldn't know what to
do with them. in That can always be done on a separate pass,
preferably by someone who can test on MIPS.

I didn't remove a reference to IRIX in testsuite/lib/future.exp, as I
believe that code is imported from DejaGNU.

Built and tested on x86_64 Fedora 20, with --enable-targets=all.

Tested that building for --target=mips-sgi-irix6 on x86_64 Fedora 20
fails with:

checking for default auto-load directory... $debugdir:$datadir/auto-load
checking for default auto-load safe-path... $debugdir:$datadir/auto-load
*** Configuration mips-sgi-irix6 is obsolete.
*** Support has been REMOVED.
make[1]: *** [configure-gdb] Error 1
make[1]: Leaving directory `/home/pedro/gdb/mygit/build-irix'
make: *** [all] Error 2

gdb/
2014-10-10  Pedro Alves  <palves@redhat.com>

* Makefile.in (ALL_TARGET_OBS): Remove mips-irix-tdep.o and solib-irix.o.
(ALLDEPFILES): Remove mips-irix-tdep.c and solib-irix.c.
(HFILES_NO_SRCDIR): Remove solib-irix.h.
* NEWS: Mention that support for mips-sgi-irix5* mips-sgi-irix6*
and been removed.
* config/mips/irix5.mh, config/mips/irix6.mh: Delete files.
* configure.ac: Remove references to IRIX.
* configure.host: Add *-*-irix* to the obsolete hosts section.
Remove all other references to irix.
* irix5-nat.c, mips-irix-tdep.c, solib-irix.c, solib-irix.h:
Delete files.

gdb/testsuite/
2014-10-10  Pedro Alves  <palves@redhat.com>

* gdb.base/bigcore.exp: Remove references to IRIX.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/interrupt.exp: Likewise.
* gdb.base/mips_pro.exp: Likewise.
* gdb.base/nodebug.exp: Likewise.
* gdb.base/setvar.exp: Likewise.
* lib/gdb.exp (gdb_compile_shlib): Remove mips-sgi-irix* case.

Microblaze: Reject invalid target descriptions

We currently validate the target description, but then forget to
reject it if found invalid.

Tested that incorrect descriptions are rejected and GDB warns about
them.

Tested the Microblaze Design with and without stack-protect registers.
The gdb command "info registers" displayed the register correctly.  If
a stack protect design is not selected, only core registers are
displayed.  When the stack-protect registers are selected in the
design, the core registers along with stack-protect registers are
displayed.

gdb/
2014-10-10  Ajit Agarwal  <ajitkum@xilinx.com>

* microblaze-tdep.c (microblaze_gdbarch_init): If the description
isn't valid, release the tdesc arch data and return NULL.

Cache the vsyscall/vDSO range per-inferior

We're now doing a vsyscall/vDSO address range lookup whenever we fetch
shared libraries, either through an explicit "info shared", or when
the target reports new libraries have been loaded, in order to filter
out the vDSO from glibc's DSO list.  Before we started doing that, GDB
would only ever lookup the vsyscall's address range once in the
process's lifetime.

Looking up the vDSO address range requires an auxv lookup (which is
already cached, so no problem), but also reading the process's
mappings from /proc to find out the vDSO's mapping's size.  That
generates extra RSP traffic when remote debugging.  Particularly
annoying when the process's mappings grow linearly as more libraries
are mapped in, and we went through the trouble of making incremental
DSO list updates work against gdbserver (when the probes-based dynamic
linker interface is available).

The vsyscall/vDSO is mapped by the kernel when the process is
initially mapped in, and doesn't change throughout the process's
lifetime, so we can cache its address range.

Caching at this level brings GDB back to one and only one vsyscall
address range lookup per process.

Tested on x86_64 Fedora 20.

gdb/
2014-10-10  Pedro Alves  <palves@redhat.com>

* linux-tdep.c: Include observer.h.
(linux_inferior_data): New global.
(struct linux_info): New structure.
(invalidate_linux_cache_inf, linux_inferior_data_cleanup)
(get_linux_inferior_data): New functions.
(linux_vsyscall_range): Rename to ...
(linux_vsyscall_range_raw): ... this.
(linux_vsyscall_range): New function; handles caching.
(_initialize_linux_tdep): Register linux_inferior_data.  Install
inferior_exit and inferior_appeared observers.

PR symtab/14466: Work around PR libc/13097 "linux-vdso.so.1"

With upstream glibc, GDB prints:

  warning: Could not load shared library symbols for linux-vdso.so.1.
  Do you need "set solib-search-path" or "set sysroot"?

A bug's been filed for glibc a few years back:

  http://sourceware.org/bugzilla/show_bug.cgi?id=13097

but it's still not resolved.  It's not clear whether there's even
consensus that this is indeed a glibc bug.  It would actually be nice
if GDB also listed the vDSO in the shared library list, but there are
some design considerations with that:

- the vDSO is mapped by the kernel, not userspace, therefore we
   should load its symbols right from the process's start of life,
   even before glibc / the userspace loader sets up the initial DSO
   list.  The program might even be using a custom loader or no
   loader.

- that kind of hints at that solib.c should handle retrieving shared
   library lists from more than one source, and that symfile-mem.c's
   loading of the vDSO would be converted to load and relocate the
   vDSO's bfd behind the target_so_ops interface.

- and then, once glibc links in the vDSO to its DSO list, we'd need
   to either:

    a) somehow hand over the vDSO from one target_so_ops to the other

    b) simply keep hiding glibc's entry.

And then b) seems the simplest.

With that in mind, this patch simply discards the vDSO from glibc's
reported shared library list.

We can match the vDSO address range with the addresses found iterating
the dynamic linker list, to tell which dynamic linker entry is the
vDSO.

Tested on x86_64 Fedora 20.

gdb/
2014-10-10  Jan Kratochvil  <jan.kratochvil@redhat.com>
    Pedro Alves  <palves@redhat.com>

PR symtab/14466
* solib-svr4.c (svr4_read_so_list): Rename to ...
(svr4_current_sos_1): ... this and change the function comment.
(svr4_current_sos): New function.

gdb/testsuite/
2014-10-10  Jan Kratochvil  <jan.kratochvil@redhat.com>
    Pedro Alves  <palves@redhat.com>

PR symtab/14466
* gdb.base/vdso-warning.c: New file.
* gdb.base/vdso-warning.exp: New file.

Split vDSO range lookup to a gdbarch hook

We have a case in solib-svr4.c where we could reuse symfile-mem.c's
vDSO range lookup. Since symfile-mem.c is not present in all
configurations solib-svr4.c is, move that lookup to a gdbarch hook.

This has the minor (good) side effect that we stop even trying the
target_auxv_search lookup against targets that don't have a concept of
a vDSO, in case symfile-mem.c happens to be linked in the build
(--enable-targets=all).

Tested on x86_64 Fedora 20.

gdb/
2014-10-10 Pedro Alves <palves@redhat.com>

* arch-utils.c (default_vsyscall_range): New function.
* arch-utils.h (default_vsyscall_range): New declaration.
* gdbarch.sh (vsyscall_range): New hook.
* gdbarch.h, gdbarch.c: Regenerate.
* linux-tdep.c (linux_vsyscall_range): New function.
(linux_init_abi): Install linux_vsyscall_range as
vsyscall_range gdbarch hook.
* memrange.c (address_in_mem_range): New function.
* memrange.h (address_in_mem_range): New declaration.
* symfile-mem.c (find_vdso_size): Delete function.
(add_vsyscall_page): Use gdbarch_vsyscall_range.

infrun.c:normal_stop: Fix typo in comment

gdb/
2014-10-10 Pedro Alves <palves@redhat.com>

* infrun.c (normal_stop): Fix typo in comment.

daily update

PR tdep/9390: Fix typo on xstorxstormy16-tdep.c

This patch fixes the bug described in PR tdep/9390, which is about a
wrong check in the following code:

    ...

    /* optional copying of args in r2-r7 to r10-r13.  */
    /* Probably only in optimized case but legal action for prologue.  */
    else if ((inst & 0xff00) == 0x4600 /* 46SD   mov rD, rS */
     && (inst & 0x00f0) >= 0x0020 && (inst & 0x00f0) <= 0x0070
     && (inst & 0x000f) >= 0x00a0 && (inst & 0x000f) <= 0x000d)
                ^^^^^^^^^^^^^^^^^^^^^^^^^
    ...

This condition will never trigger, and the fix proposed in the bug
(which made sense to me) was to test against 0x000a.  I tried finding
documentation about this target, but couldn't find anything.  I don't
even know if it is still used, but decided to submit the fix anyway.

Tested on my x86_64 Fedora 20 GNU/Linux.

gdb/ChangeLog:
2014-09-16  Sergio Durigan Junior  <sergiodj@redhat.com>

PR tdep/9390
* xstorxstormy16-tdep.c (xstormy16_analyze_prologue): Fix possible
typo when using logical AND to determine instruction type.

This is a series of patches that add support for the SPARC M7 cpu to
binutils. They were discussed and approved here:

https://sourceware.org/ml/binutils/2014-10/msg00038.html

Remove unused local variable

As a result of commit b57bacec, local variable 'printed' is no longer
used. This patch is to remove it.

gdb:

2014-10-09 Yao Qi <yao@codesourcery.com>

* infrun.c (handle_signal_stop): Remove local variable 'printed'.

daily update

Add Yao Qi as global maintainer

gdb/ChangeLog:

2014-10-08 Stan Shebs <stan@codesourcery.com>

* MAINTAINERS (GLOBAL MAINTAINERS): Add Yao Qi.

include/elf/aarch64.h: Add reloc numbers from ABI release 1.0

Add the relocation numbers defined in ABI release 1.0 but missing
from the current header. This will allow tools like objdump to dump
objects that use these relocations.

include/elf/ChangeLog:

2014-10-08 Will Newton <will.newton@linaro.org>

* aarch64.h: Sync up relocations with ABI release 1.0.