polarssl: security bump to version 1.2.11

Fixes CVE-2014-4911 and a few other issues that don't have a CVE assigned
(backports from 1.3.x branch).
The no programs & shared/static patches are now upstream albeit in a
slightly different form.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

e2fsprogs: bump to version 1.42.11

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

arch: avr32 should only get removed for the 2015.02 release

As discussed on the list.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt5base: fix typo

Signed-off-by: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

inadyn: not available for static

inadyn isn't static-build friendly, even if we pull in the libz link
line for the failure stated below it'll fail when trying to link to
libdl and using dlopen for the plugins. Fixes:
http://autobuild.buildroot.net/results/1a1/1a1a184e8248e5c51fa730d0c9721fe67a9c84a4/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

atftp: fix static linking

Readline uses ncurses hence pull it in, also needs to explicitly link
against libpthread. Fixes:
http://autobuild.buildroot.net/results/259/2592612be38a2c1dde21b44be2ecf25d1cc5211a/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

arch: deprecate the AVR32 architecture

The AVR32 architecture from Atmel is obsolete since a long time, not
supported upstream in most of the toolchain components (requires a
special version of gcc, an old version of uClibc, etc.). Until
February, Simon Dawson was making an excellent job at maintaining
AVR32 in Buildroot, and fixing all the issues caused by this
architecture. However, Simon focus has changed, and despite his call
for a new maintainer for AVR32 in Buildroot, nobody stepped up.

The issue of maintaining AVR32 is becoming worse and worse, so this
patch proposes to deprecate it for 2014.08, but keeping the support
around, to remove it for sure in 2014.11.

Cc: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

busybox: support only one version

This commit removes the version selection for the busybox
package. Busybox is very well maintained, and bugs are typically fixed
in a timely fashion. Moreover, regressions are fairly unlikely in this
very stable and well-tested tool.

Therefore, there isn't a very compelling reason to have a version
selection for Busybox since we don't accept such a version selection
for the vast majority of other packages, unless there is a strong
reason to do so.

Consequently, this commit:

 * Removes the 1.19.4, 1.20.2 and 1.21.1 Busybox versions, patches and
   default configuration file.

 * Moves the 1.22.1 patches from package/busybox/1.22.1 to just
   package/busybox/ like all other packages.

 * Renames the default 1.22.1 configuration file to just
   busybox.config.

 * Adapts the busybox.mk makefile to encode the current version to
   use.

 * Adds appropriate options to Config.in.legacy. However, even though
   the BR2_BUSYBOX_VERSION_1_22_X is removed, we don't add a
   Config.in.legacy option for it, since it would cause a legacy
   warning for virtually *all* users as most people are currently
   using 1.22.x.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gdb: remove versions 7.4 and 7.5

We already default to 7.6 for all architectures (except AVR32, ARC and
Microblaze that have their specific versions), and we have added 7.7
recently.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt: remove gcc 4.6.x specific kludge

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gcc: remove versions 4.3.x and 4.6.x

Those gcc series are old and are not used as the default versions for
any of the architectures we support, so this commit gets rid of them.

The gcc 4.3.x series technically remains used by the LPC32xx
defconfigs we have:

configs/ea3250_defconfig:BR2_GCC_VERSION_4_3_X=y
configs/fdi3250_defconfig:BR2_GCC_VERSION_4_3_X=y
configs/phy3250_defconfig:BR2_GCC_VERSION_4_3_X=y

Back when those defconfigs were introduced, gcc 4.3 was chosen because
it was the only one capable of building a fully working kernel for
those ARM-based platforms. However, the original submitter, Alexandre
Belloni, no longer has access to the hardware platforms, so he is
unable to test if newer gcc versions have fixed the problem. It
certainly doesn't make sense to keep gcc 4.3.x just for those three
boards, so we'll wait for someone actually using those defconfigs to
complain.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

uclibc: remove BR2_UCLIBC_ARM_TYPE

The BR2_UCLIBC_ARM_TYPE was only used for uClibc 0.9.32 on ARM. Now
that only uClibc 0.9.33 is supported for ARM, there is no point in
keeping BR2_UCLIBC_ARM_TYPE, since the corresponding uClibc options no
longer exist.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package: remove references to uClibc 0.9.32

This commit removes all remaining references to uClibc 0.9.32.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

uclibc: remove version 0.9.32.1

This commit removes the 0.9.32.1 version of uClibc, which is very old,
and does not bring any specific advantage over 0.9.33, which has been
around for more than two years now.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

binutils: remove 2.20.1, 2.21 and 2.23.1

 - The 2.20.x series is old, it no longer makes sense to support it.

 - In the 2.21.x series, we still have 2.21.1, so keeping 2.21 doesn't
   make much sense, so this patch removes it.

 - Similarly for the 2.23.x series, having both 2.23.1 and 2.23.2
   doesn't make much sense, so this patch removes 2.23.1 and keeps
   2.23.2.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

use default binutils for sh architecture

Tested toolchain compiles with binutils 2.22 and 2.24.
Result tested in Qemu 2.0.0. (only little endian version
tested)

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mpd: add twolame support

Now that there's a twolame package we can add support for it in mpd.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mpd: add pulseaudio deps comment, stylize libsndfile

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mpd: remove redundant depends

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain-external: remove experimental Blackfin toolchain

The 2014R1 toolchain is provided in two flavours by Analog Devices:
one based on gcc 4.3.x, which is considered stable, and one based on
gcc 4.5.x, considered experimental. In commit
5a65b8e185fab38824da5e9b7b5b9e781e31d368 ("toolchain-external: add ADI
Blackfin 2014R1 toolchain, remove 2012R1") both variants were added.

However, after some testing in the autobuilders, and discussion with
the Analog Devices folks, it turns out that the experimental version
of the toolchain is too experimental. It causes numerous build
failures, and the Analog Devices folks clearly say that it's an early
release and that they expect quite a few problems to show up.

Therefore, this commit removes the experimental flavor and keeps only
the stable variant. Note that the removal/renaming of the Config.in
options is not a problem, since those options were added after the
2014.05 release.

Fixes:

  http://autobuild.buildroot.org/results/2a9/2a9d9c332a206fdb46bc8ba022c74d23082a6312/
  http://autobuild.buildroot.org/results/e1c/e1ce0c1cdd0139208dddaa8f2441ab0e3ab2385e/
  http://autobuild.buildroot.org/results/993/993aca3f4719afaa4b37524f9136fb8cdc53a066/
  and more.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump default to version 3.15.5

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 3.{4, 10, 14, 15}.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

rsync: bump to version 3.1.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ccrypt: new package

ccrypt is a utility for encrypting and decrypting files and streams.

Signed-off-by: David Bachelart <david.bachelart@bbright.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libv4l: Bump version to 1.0.1

Quite some work has been done from 0.8.3 to 1.0.1, and as a result
this commit is very intrusive. The biggest change is the move to an
autotools package.

Then, the options that enable utilities individually have been deprecated
and moved to Config.in.legacy. Instead, we introduce new option to select
either all the utilities. This change loses granularity in favor of
maintainability.

[Peter: needs host-pkgconf. Select and use argp-standalone on uClibc]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

xserver_xorg-server: drop host-xfont_font-util dependency

This is no longer needed now that e244eb12d (xserver_xorg-server: Fix race
condition when installing man pages) has been reverted.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ntpd: drop default /etc/default/ntpd file

With the recent change to the init script the default /etc/default/ntpd file
doesn't do anything, so don't install it.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Fixing ntpd time syncing problem

Add ntp.conf file to make ntpd syncing.
Starting ntpd daemon with -g to sync time also with big offsets.
Removes the use of deprecated ntpdate command for initial time sync.

[Peter: drop unused NTPDATE_BIN variable]
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

openvpn: disable plugins for static builds

Fixes:
http://autobuild.buildroot.net/results/082/08295cdcb3d14198bc7fbddec89d6fead946afba/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

cryptodev-linux: fix license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

cloop: drop unused target variant

We only support cloop for the host (for fs/cloop), so drop the unused target
variant.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

cloop: add license information

[Peter: clarify that advancecomp is GPLv2+, add COPYING]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

bootutils: add license information

[Peter: also add _LICENSE_FILES]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libnl: Move the pthread dependency menu comment

In order for this comment to be properly displayed, it must be moved to be
at the end of the file.

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

xserver_xorg-server: Fix race condition when installing man pages, 2nd try

Should fix the still present bug:
http://autobuild.buildroot.net/results/045/04514bc9a8d1aad8ddd7af4f0fd8c16edd2e89a9/
http://autobuild.buildroot.net/results/1f2/1f25f744771fbb5124dca4563d79ea92cbfd72a3/

This patch reverts my previous attempt to fix this hard-to-catch race condition
http://git.buildroot.net/buildroot/commit/package/x11r7/xserver_xorg-server?id=e244eb12dfc50bb56167d5fdaef3aac52b0ff6a3

and removes make target install-data from _INSTALL_STAGING_OPT, which was
introduced in 2008:
http://git.buildroot.net/buildroot/commit/package/x11r7/xserver_xorg-server/xserver_xorg-server.mk?id=d4e56ff4dc8a0528550eb8503956bdcddb2fe516

Comparing the content of STAGING_DIR with and without "make install-data" showed
no difference so I assume that is it no longer necessary to explicitly call this
make target as the normal install target takes care of everything.

The race condition occurs because "make install" and "make install-data" both
install usr/share/man/man1/Xserver.1

[Peter: don't remove host-xfont_font-util]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mpd: fix build failures with gcc 4.9.x

As reported by Sagaert Johan in the mailing list mpd 0.18.x fails to
build with gcc 4.9.x
Patch status: sent upstream.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python3: improve isolation of build environment and error handling

This commit mainly fixes bug #7268 by improving the isolation of
the build environment by making sure some host environment header
paths do not leak into the target build. The investigation was done by
David <buildroot-2014@inbox.com>. This is done by not calling the
add_multiarch_paths() function of setup.py when we're cross-compiling,
a change made in the newly introduced
python3-012-dont-add-multiarch-path.patch.

In addition to this, another patch is added to make sure the build is
aborted when one of the Python module fails to build. This is done in
python3-013-abort-on-failed-modules.patch. Without this, the Python
setup.py script simply logs which module failed to build, but doesn't
abort, so it's hard to notice when there is a problem.

[Peter: slightly reword commit message]
Cc: David <buildroot-2014@inbox.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python: improve isolation of build environment and error handling

This commit mainly fixes bug #7268 by improving the isolation of
the build environment by making sure some host environment header
paths do not leak into the target build. The investigation was done by
David <buildroot-2014@inbox.com>. This is done by not calling the
add_multiarch_paths() function of setup.py when we're cross-compiling,
a change made in the newly introduced
python-013-dont-add-multiarch-path.patch.

In addition to this, another patch is added to make sure the build is
aborted when one of the Python module fails to build. This is done in
python-014-abort-on-failed-modules.patch. Without this, the Python
setup.py script simply logs which module failed to build, but doesn't
abort, so it's hard to notice when there is a problem.

[Peter: slightly reword commit message]
Cc: David <buildroot-2014@inbox.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dmraid: add license information

[Peter; license is GPLv2+, drop LGPL, add LICENSE file]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lesstif: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libraw: add license information

[Peter: also add README to _LICENSE_FILES]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-fusion: add license information

[Peter: license is GPLv2+]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

musepack: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

opencv: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

quota: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

setserial: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

texinfo: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

torsmo: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

usbmount: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dvb-apps: fix static only build

This commit makes dvb-apps behave properly in a static-only build. It
passes the static=1 variable to the Makefile, and adds a patch that
fixes the Makefile to not build .so libraries when static=1.

Fixes:

  http://autobuild.buildroot.org/results/3db/3dbfa7b692d4b123b3ba6b55c84df12818273554/

[Peter: drop V=1 as pointed out by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

support/download: fix the git helper

When switching the git helper over to a shell script, a special case was
not carried over: in case the remote has the required reference, we
attempt a shallow clone, using --depth 1. However, this is not supported
when the remote is accessed with the http protocol.

Therefore, the download fails.

What happened before the conversion to a shell script was that the helper
in the Makefile would fallback to doing a full-clone.

This is the case and behaviour that were lost in the conversion.

To avoid making the script too complex, we only attempt a full clone if
needed. And we decide that a full clone is needed by default; we decide
it is unnecessary if the remote has the needed reference *and* the
shallow clone was successful.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

legal-info: depend on patch rather than extract

Switch legal-info generation dependency to patch rather than extract
so we can use debian/copyright from debian-maintained packages,
because the *orig* file alone doesn't contain the appropiate file.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

librtlsdr: new package

librtlsdr is a library and software for using a Realtek RTL2832U based
DVB-T dongle as a cheap SDR.

[Thomas: change license to GPLv2+, reword help text for the detach
driver option.]

Signed-off-by: Jason Pruitt <jrspruitt@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

php: fix phar build failure for CLI

Disable the phar command-line tool since it requires php to pack itself
up. Fixes build failure for CLI (or CLI+CGI) variants of php.
Hardly useful for embedded scenarios.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

openntpd: add SysV initscript and user

Add the _ntp user that the daemon requires to work in any way.
Add a SysV-style initscript as well, but not with '-s' (set time
immediately after startup) because it can make the boot process stall
for a few seconds if there's no proper network connectivity/dns setup.
Make ntp and openntpd mutually exclusive since they overstep each other.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs: add defconfig for TS-5x00 SBCs

This patch adds support for the TS-5x00 serie of Technologic Systems
x86-based Single Board Computers, featuring an AMD Elan520 processor.

http://wiki.embeddedarm.com/wiki/#AMD

[Peter: explicitly set arch/variant in defconfig, strip trailing spaces]
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

php: add option for phar builtin extension

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python3: bump to version 3.4.1

A few minor updates on the patches were needed to resolve some
conflicts on the main Makefile.pre.in file, in the list of modules to
build/install.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python: bump to version 2.7.8

The different patches are just refreshed to apply without fuzz, there
are no changes/conflicts.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/freetype: Fix removal of wrong include/freetype2/freetype link by host-freetype

Broken by http://git.buildroot.net/buildroot/commit/package/freetype/freetype.mk?id=cc5b8e72308f523b3826ada5fe7009b722bf9a79

Fixes
http://autobuild.buildroot.net/results/b77/b770d495115f25f182463eb4623cf9ee0a0f5d68/
http://autobuild.buildroot.net/results/5b4/5b449a9120d4ece020e22c36299489e80ab094b9/
http://autobuild.buildroot.net/results/fb9/fb9ec94fc4e2dcdf894ec774bd1e5809611c56fb/
http://autobuild.buildroot.net/results/b12/b12989ec1c57f8cf3a2f743cc94de082692b7de6/
http://autobuild.buildroot.net/results/f25/f255f64c210b04368069f80402da8afaecb9464b/
http://autobuild.buildroot.net/results/d66/d66e80b5caab1661e1661922933a963c989d02cc/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

support/download: fix the bzr helper

bzr uses the name of the extension of the output file to known what
output format to use: tar, tgz, tar.bz2... If no extension is
recognised, bzr will output to a directory.

Since we use 'mktemp .XXXXXX' to generate temporary files, it obviously
never ends with a recognised extension. Thus, bzr expects the output to
be a directory, and fails since it is a file.

Fix that by forcing the output format.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

quagga: bump to version 0.99.23

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ncmpc: new package

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libmpdclient: new package

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libnss: bump to version 3.16.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump default to version 3.15.4

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 3.{4, 10, 14, 15}.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Add support for Congatec QMX6

Add support for the iMX6 based conga-QMX6 family of Qseven modules.

This patch is based on Linux 3.0.35 from Congatec's kernel reporitory

[Peter: slightly simplify post build script]
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lxc: disable lua and python

Also conditionally disable bash if bash isn't built. Fixes:
http://autobuild.buildroot.net/results/8ea/8ea1d682706ba5fee27a64008bb7237d53120e9b/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pkg-infra: do the package install before installing init files

The init hooks may reference files installed by the package. For
example, when a package installs systemd unit files, and wants them
enabled/disabled by default, the init hook may move/symlink/rename the
unit files.

Currently, the init hooks are called before the package is installed,
thus breaking the use-case above.

Just inverse the install order, so that a package is installed before
its init hooks are called.

Fixes: http://autobuild.buildroot.net/results/5b03174318d8a6dc3112053ff141b70a90869c20/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

infra: fix autotools .la fixing when no .la files are present

Commit 6f638ea9c9c7bacc646430a74ad3dd2740eae676 ("infra: /usr support:
STAGING_DIR can be outside BASE_DIR") changed a for-construct around 'sed
-i' in a 'find | xargs sed -i'. However, if the find returns no results,
sed complains with:
    '/bin/sed: no input files'

This commit adds the extra parameter -r / --no-run-if-empty to the xargs
call, effectively fixing this problem case.

Reported-by: Rohit Kumar <rkthebest@gmail.com>
Fix-suggested-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

network-manager: bump to 0.9.10.0

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain/helpers.mk: update check_arm_abi comment

Since commit b2e88073dbf (toolchain: check ARM EABI vs. EABIhf for external
toolchains), check_arm_abi accepts a second parameter. Update the comment
accordingly.

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/ca-certificates: add tarball's hashes

ca-certificates contains sensitive security-related information,
and we want to ensure the archive that we download has not been
compromised.

Add the sha1 and sha256 hashes from Debian's packaging.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Martin Bark <martin@barkynet.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

manual: add documentation about packages' hashes

Although md5 is, for legacy reasons, a supported hash type,
it is not documented on purpose, since it is now known to
be weak.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pkg-infra: add possiblity to check downloaded files against known hashes

Some of the packages that Buildroot might build are sensitive packages,
related to security: openssl, dropbear, ca-certificates...

Some of those packages are downloaded over plain http, because there is
no way to get them over a secure channel, such as https.

In these dark times of pervasive surveillance, the potential for harm that
a tampered-with package could generate, we may want to check the integrity
of those sensitive packages.

So, each package may now provide a list of hashes for all files that needs
to be downloaded, and Buildroot will just fail if any downloaded file does
not match its known hash, in which case it is removed.

Hashes can be any of the md5, sha1 or sha2 variants, and will be checked
even if the file was pre-downloaded.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pkg-infra: don't use DL_DIR as scratchpad for temporary downloads

DL_DIR can be a very precious place for some users: they use it to store
all the downloaded archives to share across all their Buildroot (and
maybe non-Buildroot) builds.

We do not want to trash this location with our temporary downloads (e.g.
git, Hg, svn, cvs repository clones/checkouts, or wget, bzr tep tarballs).

Turns out that we already have some kind of scratchpad, the BUILD_DIR.
Although it is not really a disposable location, that's the best we have
so far.

Also, we create the temporary tarballs with mktemp using the final tarball,
as template, since we want the temporary to be on the same filesystem as
the final location, so the 'mv' is just a plain, atomic rename(2), and we
are not left with a half-copied file as the final location.

Using mktemp ensures all temp file names are unique, so it allows for
parallel downloads from different build dirs at the same time, without
cloberring each downloads.

Note: we're using neither ${TMP} nor ${TMPDIR} since they are shared
locations, sometime with little place (eg. tmpfs), and some of the
repositories we clone/checkout can be very big.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[tested a particular scenario that used to fail: two separate builds
using a shared DL_DIR, ccache enabled, so that they run almost
synchronously. These would download the same file at the same time,
corrupting each other. With the patches in this series, all works
fine.]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

xserver_xorg-server: Bump version to 1.15.2

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain/helpers.mk: don't discard check_arm_abi stderr

Since we only need to know whether the compiler runs successfully, and
stderr is empty for the success case, there is no need to redirect stderr to
/dev/null. Moreover, stderr output of the failing case reveals valuable
information on the real failure reason.

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 3.12.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dbus-glib: security bump to version 0.102

Fixes CVE-2013-0292 (dbus-glib message sender privilege escalation).

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dbus-glib: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

infra: /usr support: STAGING_DIR can be outside BASE_DIR

If the user sets a custom BR2_HOST_DIR, then STAGING_DIR is not under
BASE_DIR. The .pc/.la file fixup commands incorrectly made this assumption
and thus should be corrected.

Additionally, this patch:
- rewords the comment in pkg-autotools that explains the replacements.
- removes a for statement in favor of xargs

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lxc: bump to version 1.0.4

Also switch to new homepage and github download, and specify distro
variant since host distro != target distro and sample configs for each
case aren't useful anyway.
It sometimes failed to autodetect because some of the tests can't be
executed when cross compiling (happened on gentoo host).

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lz4: security bump to r119

Fixes issue 134 - https://code.google.com/p/lz4/issues/detail?id=134
AKA CVE-2014-4611.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pinentry: Some toolchains need -pthread in the linker command line

Some toolchains, like Sourcery Codebench 2013.05, need -pthread to be
added to the linker command line when linking pinentry-qt.

Fixes:
   http://autobuild.buildroot.net/results/6be/6be109ccedec603a67cebdb31b55865dcce0e128/

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Markos Chandras <Markos.Chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dbus-python: bump to version 1.2.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

freetype: fix double installation

Eric_L on IRC reported that the following strange behavior: the first
installation of freetype works, and then each time you do "make
freetype-dirclean freetype", it fails and works alternatively, in a
fully reproducible manner.

After some investigation, it turns out that the problem is caused by
the creation of the symbolic link /usr/include/freetype2/freetype ->
/usr/include/freetype2 for backward compatibility reasons by
freetype.mk, in a post-staging installation hook. As the symbolic link
is created *after* the installation, the first installation works
fine. However, the second installation fails because the freetype
build system does:

 ./builds/unix/mkinstalldirs \
         /home/thomas/projets/buildroot/output/target/usr/include/freetype2/config
  [...]
 rm -f /home/thomas/projets/buildroot/output/target/usr/include/freetype2/freetype/config/*
 rmdir /home/thomas/projets/buildroot/output/target/usr/include/freetype2/freetype/config
  [...]
 /usr/bin/install -c -m 644 ./builds/unix/ftconfig.h               \
       /home/thomas/projets/buildroot/output/target/usr/include/freetype2/config/ftconfig.h

This last line fails, because due to the symbolic link mentioned above, the
command 'rmdir
/home/thomas/projets/buildroot/output/target/usr/include/freetype2/freetype/config'
has in fact the consequence of deleting the 'config' directory created
by the mkinstalldirs command.

The proposed solution to solve this problem is to remove the symbolic link
in a pre-install hook, run the installation, and restore the symbolic link.

[Peter: minor tweaks to commit message / comment]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

fltk: fix build failure with newer jpeg libraries

Fixes:
http://autobuild.buildroot.net/results/978/9786ab41117fbe760e4e8ae40ccf37af55813728/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dbus: security bump to version 1.8.6

Fixes: CVE-2014-3532, CVE-2014-3533.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

zyre: remove spurious dependency on filemq

zyre doesn't actually depend on filemq; it just needs czmq and zeromq

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

zyre: bump version to v1.0.0

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pkg-infra: move the cp (aka localfiles) download helper to a script

Maintaining the download helpers in the Makefile has proved to be a bit
complex, so move it to a shell script.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pkg-infra: move the scp download helper to a script

Maintaining the download helpers in the Makefile has proved to be a bit
complex, so move it to a shell script.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pkg-infra: move the bzr download helper to a script

Maintaining the download helpers in the Makefile has proved to be a bit
complex, so move it to a shell script.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pkg-infra: move the wget download helper to a script

Maintaining the download helpers in the Makefile has proved to be a bit
complex, so move it to a shell script.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pkg-infra: move the hg download helper to a script

Maintaining the download helpers in the Makefile has proved to be a bit
complex, so move it to a shell script.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[tested a particular scenario that used to fail, when the 'hg archive'
step is interrupted, now working fine]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pkg-infra: move the cvs download helper to a script

Maintaining the download helpers in the Makefile has proved to be a bit
complex, so move it to a shell script.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pkg-infra: move the svn download helper to a script

Maintaining the download helpers in the Makefile has proved to be a bit
complex, so move it to a shell script.

[Peter: redirect pushd/popd output to /dev/null]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pkg-infra: move the git download helper to a script

The git download helper is getting a bit more complex. Fixing it in the
Makefile when it breaks (like the recent breakage with a non-existing
sha1-cset) proves to be challenging, to say the least.

Move it into a shell script in support/download/git, which will make
it much easier to read, maintain, fix and enhance in the future.

[Peter: redirect pushd/popd output to /dev/null]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>