git.libre-soc.org Git - buildroot.git/log

gst-ffmpeg: work-around bogus configure logic on SPARC

The libav version built into the gst-ffmpeg code produces a bogus
binary on SPARC, which causes the following error of the
check-bin-arch script:

  ERROR: architecture for ./usr/lib/gstreamer-0.10/libgstffmpeg.so is Sparc v8+, should be Sparc
  ERROR: architecture for ./usr/lib/gstreamer-0.10/libgstpostproc.so is Sparc v8+, should be Sparc
  ERROR: architecture for ./usr/lib/gstreamer-0.10/libgstffmpegscale.so is Sparc v8+, should be Sparc

The problem is the following bit of code in
gst-lib/ext/libav/configure:

elif enabled sparc; then

    enabled vis && check_asm vis '"pdist %f0, %f0, %f0"' -mcpu=ultrasparc &&
        add_cflags -mcpu=ultrasparc -mtune=ultrasparc

I.e, it checks if the architecture supports the pdist
instruction... but forces -mcpu to ultrasparc while doing so. So it's
like "let's see if this Ultrasparc instruction exists when I force the
compiler to think I'm using Ultrasparc", which is non-sensical. This
has been fixed later on in libav upstream:

  https://git.libav.org/?p=libav.git;a=commit;h=6aa93689abe8c095cec9fa828c2dee3131008995

However, this commit cannot be backported as-is since the shell
function check_inline_asm did not exist in the old libav version
bundled in gst-ffmpeg.

Therefore, we take the simpler route of disabling the VIS
optimizations on SPARCv8 and Leon3.

Fixes:

  http://autobuild.buildroot.net/results/e82d179c3d4f92ad7423693a4b1d42379a3f5411/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Revert "qemu: allow to build host variant statically"

This reverts commit a6afa968fc9080080b943885b8599475df9e36c4, which
causes too many different build issues:

  http://autobuild.buildroot.net/results/d5c/d5ced6c9738b285e6fda8c3d41c3c66ee0cf1edc/build-end.log

  http://autobuild.buildroot.net/results/fca/fca01cc5ce13384df0a7f8fad75e2acd05598f99/build-end.log

  http://autobuild.buildroot.net/results/f17/f1755f26a3eacd84de9bd901b214a5bbb964988c/build-end.log

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/systemd: better patch to avoid ln --relative

We currently have two patches that address the ln --relative issue
differently. The first one changes the behaviour to generate absolute
symlinks, which is incorrect; the second provides an ad-hoc solution
for a single case.

Replace both of them with a single patch that mimics ln --relative when
the host ln does not support it.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

portmap: remove package as it is obsolete

The upstream tarball isn't available, no releases since ten years. The
latest change to upstream git is from 2014. Better use rpcbind for any
RPC portmapper service.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: make the legacy option select rpcbind, as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

binutils: remove support for binutils 2.25

Now that we have switched to binutils 2.27 as the default binutils
version, it's time to get rid of binutils 2.25. So this commit remove
the 2.25 version choice, the hash file entry, the patches, and adds a
Config.in.legacy option.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

binutils: switch to 2.27 as the default version

Now that binutils 2.28 is available, switch to binutils 2.27 as the
default version, for both the host variant and the target variant. Note
that the target variant, when no host variant is built, was still
2.25.1: we forgot to update it to 2.26 when the host version was updated
to 2.26.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

binutils: remove 2.24 hash

Commit d8878112ad3df2a3d9468cf40a2401b581e7e432 ("binutils: remove
deprecated 2.24.X") removed support for binutils 2.24, but forgot to
remove the hash from binutils.hash. This commit fixes that.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

binutils: bump to 2.28

- Patch 0100-elf32-arm-no-data-fix.patch is upstream as of commit
   6342be709e8749d0a44c02e1876ddca360bfd52f, so it is removed.

- Patch 0130-tc-xtensa.c-fixup-xg_reverse_shift_count-typo.patch is
   upstream as of commit 78fb7e37eb8bb08ae537d6c487996ff17c810332, so
   it is removed.

- Patch
   0900-Revert-part-Set-dynamic-tag-VMA-and-size-from-dynami.patch is
   upstream as of commit c646b02fdcae5f37bd88f33a0c4683ef13ad5c82, so
   it is removed.

- All other patches are kept, just refreshed to apply cleanly on the
   new binutils version.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
[Thomas: improve commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc: update to 1.0.23

Bugfix release, internal RPC implementation removed.
All patches applied upstream.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uhttpd: fix TCP_FASTOPEN related compile error

Fixes [1]:

.../uhttpd-a8bf9c00842224edb394e79909053f7628ee6a82/listen.c: In function 'uh_setup_listeners':
.../uhttpd-a8bf9c00842224edb394e79909053f7628ee6a82/listen.c:120:30: error: 'TCP_FASTOPEN' undeclared (first use in this function)

[1] http://autobuild.buildroot.net/results/56e/56e0727ccd1255b05e03d1b79dc238bd88701230

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dc3dd: gettextize to match newer gettext version

Because dc3dd is being autoreconfigured and comes with an old gettext
infra, gettextize needs to be called so that the infra is updated to
match the newer version used in Buildroot.

Commit b36d57fab included a patch to add the definition of MKDIR_P to
po/Makefile.in.in in order to fix autobuild failures that ocurred when
host-gettext was built before dc3dd. This patch is no longer necessary
as gettextize adds a new Makefile template which contains the needed
definition, so drop it.

Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-serial: fix legal info

python-serial is provided under BSD-3-Clause license.

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libplatform: use SPDX short identifier for PHP license

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

php-ssh2: add version to license string

LICENSE file refers to PHP license version 3.01

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

php-memcached: fix legal info

LICENSE file refer to PHP license version 3.01. License header in all
source files refer to PHP license version 3.01 except source files for
fastlz library which is provided under MIT license and g_fmt.{c,h}
which has ISC-like license header.

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

php-imagick: add version to license string

LICENSE file refers to PHP license version 3.01.

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

php-geoip: add version to license string

License header in geoip.c refers to PHP license version 3.01.

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

php-amqp: add version to license string

LICENSE file refers to PHP license version 3.01.

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/tyrian: fixes compilation with static libs

Has been tested with: "./support/scripts/test-pkg -c tyrian.cfg -p opentyrian"
Fixes: http://autobuild.buildroot.net/results/0e2345db82b33f591958fc0f72ad914adafe0522
and some similar previous build failure.

Thanks Thomas for the tip ;-).

Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

btrfs-progs: bump version to 4.10.2

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

sqlite: bump version to 3180000 (3.18.0)

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libsoc: add host-pkgconf dependency

Without pkg-config PKG_CHECK_MODULES won't be expanded
and ./configure script produces following error message:

./configure: line 12237: syntax error near unexpected token `PYTHON,'
./configure: line 12237: ` PKG_CHECK_MODULES(PYTHON, python-"$PYTHON_VERSION")'

Fixes:

http://autobuild.buildroot.net/results/86e/86e04bd2b10527130306451e56a7693ed4b4befd

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libmaxminddb: improve --disable-tests patch

Following review of libmaxminddb patch by Thomas Petazzoni, here is an
enhanced version of the --disable-tests patch which has been sent
upstream.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: bump 4.{4, 9, 10}.x series

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux: bump default version to 4.10.8

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libva-intel-driver: bump version to 1.8.0

Autoreconf is not necessary anymore after a fix was commit upstream:
https://github.com/01org/intel-vaapi-driver/commit/fe6280841dfaaee94e8664517420f351cd334c86

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libva: bump version to 1.8.0

Removed patch because libva-utils are no longer part of the libva
package:
https://lists.01.org/pipermail/intel-vaapi-media/2017-March/000015.html

* Move all utilities and tests to libva-utils

Package libva-utils will be added later.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mc: bump version to 4.8.19

Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lvm2: disable build with uClibc-ng

lvm2 needs floorl() amnd nearbyintl(), which uClibc does not provide
for all architectures.

The simplest solution is to just disable lvm2 for uClibc.

Fixes:
  http://autobuild.buildroot.net/results/733/733c4d52f22d5f104b835d0f1c64e8a555ec1339/
  http://autobuild.buildroot.net/results/9ce/9ce371b59f0113d10261ede919a7e4f2ce377b3c/
  http://autobuild.buildroot.net/results/e48/e48fbec55160428b84c8d3b2ca957e8f6432c8e1/

Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: adjust commit log, as suggested by Yann E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libdrm: fix autoreconf

To properly autoreconf, the xorg macros, from host-xutil_util-macros,
are needed.

Fixes:
    http://autobuild.buildroot.org/results/2e8/2e887c25b22bd36eab36ff361645306c8ddb79aa/
    http://autobuild.buildroot.org/results/7c0/7c0050d63a1d34eecb6d16e2654369cea561707a/
    http://autobuild.buildroot.org/results/2ef/2ef3d6d74c56632c012b85e05af6eaf0259b72c9/
    [...]

(Thanks Romain for confirming the fix on IRC! ;-) )

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libdrm: fix linking of etnaviv_cmd_stream_test

Fixes
http://autobuild.buildroot.net/results/68a/68af62f4ab6944d326468818562c05fd5cc55b03/
http://autobuild.buildroot.net/results/c33/c3330ef9a8cadb46bbd31c5b14ece34f192133e3/
http://autobuild.buildroot.net/results/d18/d181bd044246646732a14815aae08337b0b5eecf/
http://autobuild.buildroot.net/results/4f5/4f5872211812c7e191cffcf41cab998fc20c0d20/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: add missing autoreconf=yes.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/synergy: bump to version 1.8.8 to fix build errors

Building synergy on sparc, nios2, mipsel and mips64el would fail with
the following errors:
  src/lib/ipc/IpcClientProxy.cpp: In member function 'void IpcClientProxy::send(const IpcMessage&)':
  src/lib/ipc/IpcClientProxy.cpp:150:59: error: ISO C++ says that these are ambiguous, even though the worst conversion for the first is better than the worst conversion for the second: [-Werror]
     ProtocolUtil::writef(&m_stream, kIpcMsgLogLine, &logLine);
                                                             ^
  In file included from src/lib/ipc/IpcClientProxy.cpp:23:0:
  src/lib/ipc/../synergy/ProtocolUtil.h:82:16: note: candidate 1: static void ProtocolUtil::writef(void*, const char*, va_list)
    static void   writef(void*, const char* fmt, va_list);
                  ^
  src/lib/ipc/../synergy/ProtocolUtil.h:53:16: note: candidate 2: static void ProtocolUtil::writef(synergy::IStream*, const char*, ...)
    static void   writef(synergy::IStream*,
                  ^
  src/lib/ipc/../synergy/ProtocolUtil.h:82:16: error: 'static void ProtocolUtil::writef(void*, const char*, va_list)' is private
    static void   writef(void*, const char* fmt, va_list);
                  ^
  src/lib/ipc/IpcClientProxy.cpp:150:59: error: within this context
     ProtocolUtil::writef(&m_stream, kIpcMsgLogLine, &logLine);
                                                             ^
  At global scope:
  cc1plus: error: unrecognized command line option '-Wno-unused-local-typedef' [-Werror]
  cc1plus: all warnings being treated as errors

Fixed by upstream commits:
  https://github.com/symless/synergy/commit/c31f908fb283dadc1a34856796e2d7a9df7bbb77
  https://github.com/symless/synergy/commit/2643cea67bed960a3ae57ba881cd06f52843fa62

Fixes:
  http://autobuild.buildroot.net/results/dc40671874aac9ad491bd4c7aa57eb1c53484492
  http://autobuild.buildroot.net/results/a37905b0c93aa0dc891a85be1701e51cf2988cbe
  http://autobuild.buildroot.net/results/611895e29faba0b35b2b27005a5142192ed63fd8
  http://autobuild.buildroot.net/results/7bdd4428c1335593b04a18ce8e9705b0bc932484

Signed-off-by: Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/dc3dd: fix build with NLS enabled

Fixes:
    http://autobuild.buildroot.org/results/56e/56eda8289118782de7b8b33f956bfb33b159b86a/
    http://autobuild.buildroot.org/results/b8b/b8b59ab00790ff1b29fb72852e05ef8b402f41ec/
    http://autobuild.buildroot.org/results/ef5/ef581cc3cae46a6ed08c321b575b71e6a384cced/
    [...and a lot more...]

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Benoît Allard <benoit.allard@greenbone.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libmaxminddb: new package

C library for the MaxMind DB file format

The libmaxminddb library provides a C library for reading
MaxMind DB files, including the GeoIP2 databases from MaxMind.
This is a custom binary format designed to facilitate fast
lookups of IP addresses while allowing for great flexibility
in the type of data associated with an address.

The MaxMind DB format is an open format. The spec is available
at http://maxmind.github.io/MaxMind-DB/. This spec is licensed
under the Creative Commons Attribution-ShareAlike 3.0 Unported
License.

http://maxmind.github.io/libmaxminddb

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: add entry in DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/bluez-tools: new package

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: add licensing information.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

php: add version to license string

As per LICENSE file, php uses PHP license version 3.01.

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package: use SPDX short identifier for EPL license

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-nfc: use SPDX short identifier for EUPL license

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ntp: use SPDX short identifier for ntp license

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wpan-tools: correct license name

iw license is ISC.

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package: use SPDX short identifier for ZPL license

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libraw: use SPDX short identifier for CDDL license

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package: use SPDX short identifier for libpng license

We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for libpng license is Libpng.

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package: use SPDX short identifier for OFL license

We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for OFLv1.0/OFLv1.1 is OFL-1.0/OFL-1.1.

This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/OFLv([1]\.[0-1])/OFL-\1/g'

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/{mesa3d, mesa3d-headers}: bump version to 17.0.3

Switched hash to sha512.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libdrm: bump version to 2.4.76

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/tvheadend: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

pacakge/dieharder: fix autoreconf

When dieharder was committed, Thomas removed the hook to cleanup the m4
files, on the reason that autoreconf would recreate the broken symlinks
(and because the hook was too complex).

It turns out the hook was needed: if the symbolic links are
broken (libtool not installed on the host machine), autoreconf fails to
do its job.

Reinstate a simpler hook.

Fixes:
http://autobuild.buildroot.org/results/a92/a92e9a74b0966f8f0bc4080f918d5ddf4c1ec0ce/
http://autobuild.buildroot.org/results/a4f/a4f6647f69ad89ff1ffe5f1331281fb7a57ade4e/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Julien Viard de Galbert <julien@vdg.name>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dieharder: new package

Signed-off-by: Julien Viard de Galbert <julien@vdg.name>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- remove complicated DIEHARDER_POST_PATCH_FIXUP that replaces bogus
   libtool .m4 files: since we are anyway autoreconfiguring the
   package, this is not necessary. And therefore, remove host-libtool
   in the dependencies.
- use GPL-2.0 instead of GPLv2
- add entry in DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ncurses: drop unneeded trailing backslashes

Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-lxml: allow build as host package

While currently there is no in-tree Buildroot package which depends on
host-python-lxml, we (DATACOM) have some proprietary modules that use it
in their test scripts.

We tested python-lxml as host package and confirmed that it builds and
works correctly. Someone else might require it, so we are proposing its
inclusion.

Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Thomas: add Config.in.host entry.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python3: remove full path from .pyc

.pyc files include path to source .py file. This patch changes the way
`pycompile.py' is launched in order to only keep the part relative to
$TARGET_DIR.

This work was sponsored by `BA Robotic Systems'.

Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python2: remove full path from .pyc

.pyc files include path to source .py file. This patch changes the way
`pycompile.py' is launched in order to only keep the part relative to
$TARGET_DIR.

This work was sponsored by `BA Robotic Systems'.

Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dc3dd: add patch to fix autoreconf

This commit adds a patch to dc3dd that fixes autoreconfiguration.

Fixes:

http://autobuild.buildroot.net/results/5b73b0d735691c5f63ed9bc3122bc84ea21faae7/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ncurses: bump to 6.0

ncurses 6.0 has been out for a while now (August 8th 2015!), so this
patch brings us up to the latest version.

- The first patch is no longer needed as it was fixed in the new
  release.
- The other two packages are still applicable, so they have been
  updated to apply properly on the new ncurses version.
- A new option: --with-pkg-config-libdir has been added. Without it
  pkg files wouldn't install to the correct location.
- NCURSES_ABI_VERSION is no longer needed, as there is only 6.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

docker-engine: bump to version 17.03.1-ce

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

docker-containerd: bump to version 4ab9917febca54791c5f071a9d1f404867857fcc

This is a runtime dependency of docker-engine in version 17.03.1-ce

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

runc: bump to version 54296cf40ad8143b62dbcaa1d90e520a2136ddfe

This is a runtime dependency of docker-engine in version 17.03.1-ce

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

DEVELOPERS: add entry for hiredis and motion

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qemu: allow to build host variant statically

Compiling Qemu statically allows to use it to chroot into target/. It is a
nice feature, so add an option for it.

Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
[Thomas: slightly tweak Config.in help text.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/mesa3d: enable gallium extra hud

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/mesa3d: explicitely disable asm

assembly are enabled by default on supported plaforms even while
crosscompiling if host == target:

checking whether to enable assembly... yes, x86_64

It was also disabled in the mesa package in Fedora since 7.6 [1].

[1] http://pkgs.fedoraproject.org/cgit/rpms/mesa.git/commit/?id=629c8726

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/meda3d: add xlib_libXvMC optional dependency

If xlib_libXvMC package is build before mesa3d, it will be detected and
enabled by the configure script.

Handle xlib_libXvMC in mesa3d for consistency.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/mesa3d: add libvdpau optional dependency

If libvdpau package is build before mesa3d, it will be detected and
enabled by the configure script.

Handle libvdpau in mesa3d for consistency.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/mesa3d: allow to enable OpenGL texture float support

While testing on a PC target with an HD6310 graphic card, the
OpenGL support was in "compat profile" mode (i.e OpenGL 2.1).

Extended renderer info (GLX_MESA_query_renderer):
    Vendor: X.Org (0x1002)
    Device: AMD PALM (DRM 2.49.0 / 4.10.4) (0x9802)
    Version: 17.0.2
    Accelerated: yes
    Video memory: 256MB
    Unified memory: no
    Preferred profile: compat (0x2)
    Max core profile version: 0.0
    Max compat profile version: 2.1
    Max GLES1 profile version: 1.1
    Max GLES[23] profile version: 2.0
OpenGL vendor string: X.Org
OpenGL renderer string: Gallium 0.4 on AMD PALM (DRM 2.49.0 / 4.10.4)
OpenGL version string: 2.1 Mesa 17.0.2
OpenGL shading language version string: 1.30

OpenGL ES profile version string: OpenGL ES 2.0 Mesa 17.0.2
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 1.0.16

It turn out that texture float support was missing...

Extended renderer info (GLX_MESA_query_renderer):
    Vendor: X.Org (0x1002)
    Device: AMD PALM (DRM 2.49.0 / 4.10.4) (0x9802)
    Version: 17.0.2
    Accelerated: yes
    Video memory: 256MB
    Unified memory: no
    Preferred profile: core (0x1)
    Max core profile version: 3.3
    Max compat profile version: 3.0
    Max GLES1 profile version: 1.1
    Max GLES[23] profile version: 3.0
OpenGL vendor string: X.Org
OpenGL renderer string: Gallium 0.4 on AMD PALM (DRM 2.49.0 / 4.10.4)
OpenGL core profile version string: 3.3 (Core Profile) Mesa 17.0.2
OpenGL core profile shading language version string: 3.30
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile

OpenGL version string: 3.0 Mesa 17.0.2
OpenGL shading language version string: 1.30
OpenGL context flags: (none)

Add a new option to let the user disable this feature if
it doesn't comply to the SGI license.
Add docs/patents.txt to MESA3D_LICENSE_FILES

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas:
- rewrap Config.in help text
- add note that not all drivers are affected by the texture float
   option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/scripts: add generic genimage script

This script is a wrapper for the genimage tool used by most boards.
The board postimage script can now call this script instead of invoking
genimage command themselves.

Signed-off-by: Etienne Phelip <etienne.phelip@savoirfairelinux.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/sdl_sound: fix build with physfs

A buildroot package for physfs has recently been added, and if it is
detected by sdl_sound's configure it enables code in the simple
player which fails to build (if the player is enabled).

(The build problem is due to physfs renaming a macro which has not been
reflected in sdl_sound.)

So, add the physfs dependency to the package information and correct
the build problem with a patch taken from Arch Linux, where they seem
to have already found and fixed this issue.

Fixes:
http://autobuild.buildroot.net/results/ae5839b978244c434dd86d49b672c437a7b19a66

Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

scripts/scanpypi: use SPDX short identifier for license

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

scripts/scancpan: use SPDX short identifier for license

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Makefile: use SPDX short identifier for Buildroot license

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

packages: use SPDX short identifier for zlib license

We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for zlib license is Zlib.

This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/zlib( )?(license)?/Zlib/g'

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package: use SPDX short identifier for Boost Software License 1.0

We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for Boost Software License 1.0 is BSL-1.0.

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package: use SPDX short identifier for AFLv2.1

We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for AFLv2.1 is AFL-2.1.

This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/AFLv2.1(\+)?/AFL-2.1\1/g'

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

freeswitch: use SPDX short identifier for license strings

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package: use SPDX short identifier for GFDL family licenses

We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for GFDLv1.1/GFDLv1.2/GFDLv1.3 is GFDL-1.1/
GFDL-1.2/GFDL-1.3.

This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/GFDL(v)?([1]\.[1-3])(\+)?/GFDL-\2\3/g'

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package: use SPDX short identifier for MPL family licenses

We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for MPLv1.0/MPLv1.1/MPLv2.0 is MPL-1.0/MPL-1.1/
MPL-2.0.

This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/MPLv([1-2]\.[0-1])/MPL-\1/g'

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package: use SPDX short identifier for Apache version 2

We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for Apache version 2 license is Apache-2.0.

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package: use SPDX short identifier for BSD-4c

We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for BSD-4c is BSD-4-Clause.

This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/BSD-4c/BSD-4-Clause/g'

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

boot, package: use SPDX short identifier for BSD-2c

We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for BSD-2c is BSD-2-Clause.

This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/BSD-2c/BSD-2-Clause/g'

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

boot, package: use SPDX short identifier for BSD-3c

We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for BSD-3c is BSD-3-Clause.

This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/BSD-3c/BSD-3-Clause/g'

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package: use SPDX short identifier for LGPLv2/LGPLv2+

We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for LGPLv2/LGPLv2+ is LGPL-2.0/LGPL-2.0+.

This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/LGPLv2(\+)?/LGPL-2.0\1/g'

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package: use SPDX short identifier for AGPLv3

We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for AGPLv3 is AGPL-3.0.

This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/AGPLv3/AGPL-3.0/g'

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package: use SPDX short identifier for LGPLv3/LGPLv3+

We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for LGPLv3/LGPLv3+ is LGPL-3.0/LGPL-3.0+.

This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/LGPLv3(\+)?/LGPL-3.0\1/g'

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

boot, package: use SPDX short identifier for LGPLv2.1/LGPLv2.1+

We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for LGPLv2.1/LGPLv2.1+ is LGPL-2.1/LGPL-2.1+.

This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/LGPLv2.1(\+)?/LGPL-2.1\1/g'

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

boot, package: use SPDX short identifier for GPLv3/GPLv3+

We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for GPLv3/GPLv3+ is GPL-3.0/GPL-3.0+.

This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/\<GPLv3\>/GPL-3.0/g'

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

boot, linux, package: use SPDX short identifier for GPLv2/GPLv2+

We want to use SPDX identifier for license strings as much as possible.
SPDX short identifier for GPLv2/GPLv2+ is GPL-2.0/GPL-2.0+.

This change is done by using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/\<GPLv2\>/GPL-2.0/g'

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package: use SPDX short identifier for GPLv1/GPLv1+

We want to use SPDX identifier for licenses as much as possible. SPDX
short identifier for GPLv1/GPLv1+ is GPL-1.0/GPL-1.0+.

This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/GPLv1(\+)?/GPL-1.0\1/g'

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

docs/manual: refer to SPDX License List

We want to use SPDX short identifier for license string as much as
possible. So refer to SPDX license list and use SPDX short identifier
for license strings in documentation.

Also remove License abbreviations that we have.

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
[Thomas: take into account suggestions from Arnout.]
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xorriso: bump version to 1.4.6

Patch 0001-fix-musl-build is removed, as it has been applied upstream.

Signed-off-by: Benoît Allard <benoit.allard@greenbone.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libiio: don't force specific backends when enabling tests

The test programs will compile just fine even when none of the
backends are enabled.

Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/xenomai: enable armv5tej support

Apply a patch from Xenomai 2.6 [1].

Fixes:
http://autobuild.buildroot.net/results/762/7623410a81b1587b33b4f4b9cf1572c872b8a6e9/build-end.log

[1] https://git.xenomai.org/xenomai-2.6.git/commit/?id=ebc2779baa222db4a5936c3d3022803355585b8c

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/synergy: fix install when building in debug

Synergy places it's executables in another location when building in
debug. Patch CMakeLists.txt to disable the behavior.

Fixes:
http://autobuild.buildroot.net/results/22d4d9a5d4363b1c9f3074f287b1383a366e0ce9

Signed-off-by: Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/xenomai: remove sh4 support

sh4 target support has been removed since Xenomai 3.x.

Fixes:
http://autobuild.buildroot.net/results/a81/a8125847367de5fd27156e5cba9ec7315c2ccd5d/build-end.log

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/lensfun: fix static only build

Build lensfun.a for static only build.

Fixes:
http://autobuild.buildroot.net/results/63e/63e7700a242c7c28ede0fe0b6a63db288e73e974/build-end.log

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/systemd: fix build on not-recent distros

systemd is at it again, using ln --relative once more, which is not
available but on the most recent distros.

Patch it out with a bit of sed magic.

Fixes:
    http://autobuild.buildroot.org/results/48e/48ecf31eca9b22339a770abd3f9abdf1ae41cfd3/
    http://autobuild.buildroot.org/results/c62/c6297c61d8c2d3ab9be77b9d398598adacdb33b3/
    http://autobuild.buildroot.org/results/22f/22ff106a4626c84422d9a3e69aa9c8fe7c76938c/
    ...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python: re-add patch mistakenly removed

As noticed by André Hentschel <nerv@dawncrow.de>, commit
652076293235276e2f978fe377322a6cbd615455 ("python: move to Git formatted
patches") mistakenly removed 018-fix-add-gcc-paths-logic.patch.

This causes bug #7971 to re-appear. To fix this, we re-introduce the
missing patch.

Reported-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

audiofile: add security patch for CVE-2017-6839

Integer overflow in modules/MSADPCM.cpp in Audio File Library (aka
audiofile) 0.3.6 allows remote attackers to cause a denial of service
(crash) via a crafted file.

https://blogs.gentoo.org/ago/2017/02/20/audiofile-multiple-ubsan-crashes/
https://github.com/mpruett/audiofile/issues/41

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

audiofile: add security patch for CVE-2017-6831

Heap-based buffer overflow in the decodeBlockWAVE function in IMA.cpp in
Audio File Library (aka audiofile) 0.3.6 allows remote attackers to cause a
denial of service (crash) via a crafted file.

https://blogs.gentoo.org/ago/2017/02/20/audiofile-heap-based-buffer-overflow-in-imadecodeblockwave-ima-cpp
https://github.com/mpruett/audiofile/issues/35

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

audiofile: add security patch for CVE-2017-6830 / CVE-2017-6834 / CVE-2017-6836 / CVE-2017-6838

CVE-2017-6830: A heap-based buffer overflow in the alaw2linear_buf function
in G711.cpp in Audio File Library (aka audiofile) 0.3.6 allows remote
attackers to cause a denial of service (crash) via a crafted file.

https://blogs.gentoo.org/ago/2017/02/20/audiofile-heap-based-buffer-overflow-in-alaw2linear_buf-g711-cpp
https://github.com/mpruett/audiofile/issues/34

CVE-2017-6834: A heap-based buffer overflow in the ulaw2linear_buf function
in G711.cpp in Audio File Library (aka audiofile) 0.3.6 allows remote
attackers to cause a denial of service (crash) via a crafted file.

https://blogs.gentoo.org/ago/2017/02/20/audiofile-heap-based-buffer-overflow-in-ulaw2linear_buf-g711-cpp
https://github.com/mpruett/audiofile/issues/38

CVE-2017-6836: A heap-based buffer overflow in the Expand3To4Module::run
function in libaudiofile/modules/SimpleModule.h in Audio File Library (aka
audiofile) 0.3.6 allows remote attackers to cause a denial of service
(crash) via a crafted file.

https://blogs.gentoo.org/ago/2017/02/20/audiofile-heap-based-buffer-overflow-in-expand3to4modulerun-simplemodule-h
https://github.com/mpruett/audiofile/issues/40

CVE-2017-6838: Integer overflow in sfcommands/sfconvert.c in Audio File
Library (aka audiofile) 0.3.6 allows remote attackers to cause a denial of
service (crash) via a crafted file.

https://blogs.gentoo.org/ago/2017/02/20/audiofile-multiple-ubsan-crashes/
https://github.com/mpruett/audiofile/issues/41

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>