configs/raspberrypi0w: increase ext4 image size

Since the bump to Linux 4.19 in commit
ed02414e9cd271c0b0db26b8d5db1bf40ff416d3, the number of kernel modules
built has increased significantly, to the point where the default of
60 MB for the ext4 image is no longer sufficient, so let's increase to
120 MB.

Fixes:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/199339556

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/raspberrypi0: increase ext4 image size

Since the bump to Linux 4.19 in commit
ed02414e9cd271c0b0db26b8d5db1bf40ff416d3, the number of kernel modules
built has increased significantly, to the point where the default of
60 MB for the ext4 image is no longer sufficient, so let's increase to
120 MB.

Fixes:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/199339555

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/atmel_sama5d27_som1_ek_mmc_dev: increase rootfs image size

The default rootfs image size is too small, causing the following
build failure:

Copying files into the device: __populate_fs: Could not allocate block in ext2 filesystem while writing file "udevd"
mkfs.ext4: Could not allocate block in ext2 filesystem while populating file system
*** Maybe you need to increase the filesystem size (BR2_TARGET_ROOTFS_EXT2_SIZE)

So we increase it to 120 MB.

Fixes:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/199339415

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/yaffs2utils: create $(HOST_DIR)/bin before installation

The yaffs2utils Makefile uses plain "cp", which fails when
$(HOST_DIR)/bin doesn't exist. Fix that by creationg $(HOST_DIR)/bin
beforehand.

Fixes:

  https://gitlab.com/buildroot.org/buildroot/-/jobs/199339624

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libcpprestsdk: fix static build with boost 1.70.0

Fixes:
 - http://autobuild.buildroot.org/results/36ef83aefd24bcc6bbf58812aa07aa0f6072cd09

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/bananapi_m64: bump to Linux 5.0 and U-Boot 2019.01

This bumps to linux/linux-headers 5.0 and u-boot version 2019.01

Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/bananapi_m2_plus: bump to Linux 5.0 and U-Boot 2019.01

This bumps to linux/linux-headers 5.0 and u-boot version 2019.01

Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/amarula_vyasa_rk3288: bump to Linux 5.0 and U-Boot 2019.01

Bump to linux/linux-headers 5.0 and u-boot version 2019.01
and use mainline linux.

Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/amarula_vyasa_rk3288: adjust U-Boot config to boot larger kernel image

Default value of CONFIG_SYS_BOOTM_LEN in u-boot causes board reset for
large uImage files, so add u-boot patch to increase the maximum kernel
image size.

Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/xlib_libXpm: fix build with NLS

Fixes:
 - http://autobuild.buildroot.org/results/cc47a39d134fbc80426bab6fa3662150374bae35

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/linknx: add optional log4cpp dependency

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/linknx: bump to version 0.0.1.37

- Remove patch, not needed since:
  https://github.com/linknx/linknx/commit/6166831eff645f21a7fd22ec3f7855f36005b8d9
- Needs iconv.h since version 0.0.1.34 and
  https://github.com/linknx/linknx/commit/2cc3a93dcf2703b3b418e0a99975f556354fb1b1
- Add a patch to fix link with libiconv
- Disable cppunit (autodetect by default), added with:
  https://github.com/linknx/linknx/commit/ee2efcde549dda82fdabde4af6d08871689cbb61

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/linknx: add license file

LICENSE has been added in version 0.0.1.32 with
https://github.com/linknx/linknx/commit/74671aa27931be40662c0266441c7470dc11d595

So add it to LINKNX_LICENSE_FILES as well as its hash

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libkrb5: fix build with NLS

Fixes:
 - http://autobuild.buildroot.org/results/b35dd775015772b0f322f77470debe09d24173ff

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/refpolicy: set python path

Set python path to $(HOST_DIR)/usr/bin/python to avoid build failures if
python3 found on host is broken

Fixes:
 - http://autobuild.buildroot.org/results/1f878405593dd05bb00fe0b06ca1c64ffbe6c572

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/jemalloc: bump to version 5.2.0

- Add hash for license file
- Support for m68k and nios2 architectures have been added with
  version 5.1.0
- Static library support has been added in version 5.2.0

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/jemalloc: add riscv support

riscv support has been added in version 4.2.0 with
https://github.com/jemalloc/jemalloc/commit/919e4a0ea92fbbf9b97efdf9f31a3c800f77cd8f

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/jemalloc: add or1k support

or1k support has been added since version 4.0.0 and
https://github.com/jemalloc/jemalloc/commit/ffa259841c6a4b6dae4ed74f02bb38703e190065

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/jemalloc: drop obsolete valgrind dependency

valgrind support has been removed since version 5.0.0 and
https://github.com/jemalloc/jemalloc/commit/9a8add1510456464bc496320990ec234798bd381

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

boot/uboot: add support for having host-python-pyelftools as a dependency

Rockchip rk3399 SOC based boards require python pyelftools library for
parsing dtb files, so lets add it as uboot dependency.

This commit introduces a new config option
BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS to achieve this.

Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-pyelftools: add host variant

This would be used by uboot for rockchip rk3399
socs boards.

Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/lrzsz: fix build with NLS

Fixes:
 - http://autobuild.buildroot.org/results/77e3ea00ca2c20d9fe284d31bbdf2b72956eae9f

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libcpprestsdk: bump to version v2.10.12

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libuv: bump to version 1.28.0

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libtorrent-rasterbar: fix build with boost 1.70.0

Fixes:
 - http://autobuild.buildroot.org/results/dc21322e101cbd242a22018f4d506b9f2c26dd33

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-ipython: bump to version 7.4.0

- Update hash for COPYING.rst, it has been updated to remove
  BSD-3-Clause text:
  https://github.com/ipython/ipython/commit/5a6ef3e35db9ac04bf47a17d96484e03370f03dd
- Add LICENSE to license files as this is now the file that contain
  BSD-3-Clause text
- Needs python3 since version 6.x and above
- Needs new runtime dependencies: backcall and jedi
- Drop obsolete python2 dependencies as well as simplegeneric:
  https://github.com/ipython/ipython/commit/dc0ceb16f92e0e943435106e863a5cfccd724a2d

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/prompt-toolkit: bump to version 2.0.9

- Add hash for license file
- Add xml depedency

prompt-toolkit in version 2.x is a dependency of ipython 7.x

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-jedi: new package

An autocompletion tool for Python that can be used for text
editors.

https://github.com/davidhalter/jedi

python-jedi is a runtime dependency of ipython 7.3.0

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: add license for the flask theme]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-parso: new package

A Python Parser.

https://github.com/davidhalter/parso

python-parso is a runtime dependency of python-jedi

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: mention Python-2.0 and BSD-3-Clause in licenses]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-backcall: new package

Specifications for callback functions passed in to an API.

https://github.com/takluyver/backcall

No license source files are provided from current version, however
upstream added one:
https://github.com/takluyver/backcall/blob/master/LICENSE

python-backcall is a runtime dependency of python-inotify 7.3.0

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/domoticz: fix build with boost 1.70.0

Fixes:
 - No autobuilders failures yet

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/domoticz: rewrite init script

Follow new S02klogd template

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/dhcp: bump to version 4.4.1

- Use --with-bind-extra-config option to:
  - add --without-zlib otherwise static build will fail if zlib is found
    on host
  - Add --without-dlopen otherwise static build will fail
- Drop all patches (already in version)
- Drop autoreconf (not needed anymore)
- Update license to MPL-2.0:
  https://www.isc.org/blogs/isc-dhcp-moves-to-mpl-2-0-license
- Update hash of license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/binutils: fix build error due to architecture name is incomplete

Fixes
  http://autobuild.buildroot.net/results/128/12803a705586e82fdfb49013da2eb3b9879ccd45/

Signed-off-by: Che-Wei Chuang <cnoize@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Nylon Chen <nylon7@andestech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/postgresql: fix build with NLS

Fixes:
 - http://autobuild.buildroot.org/results/0d35378b8bdcfffb0cefd264c95ca3617034559b

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/minicom: fix build with lintl

Fixes:
 - http://autobuild.buildroot.org/results/e64cdcf648764be53a3e951304bb89dc9410db23

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libtorrent-rasterbar: bump to version 1.2.0

- Drop boost-chrono, replaced by std::chrono since
  https://github.com/arvidn/libtorrent/commit/78bc2698327069aa69ff7460b9314cbe45bd4d66
- Drop boost random, replace by standard number classes since
  https://github.com/arvidn/libtorrent/commit/fef94a4c5254e2280b601ab3ea211cc0193fecaa
- Add two patches to fix build on uclibc
- Needs exception_ptr since
  https://github.com/arvidn/libtorrent/commit/5c361715da9d20d63b019d7fc4ce772cdecd7138

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/neardal: bump to version 4143d130ed39299bfc59d08d2c7c77dbc7f809e9

- Remove patch (already in version)
- Add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gnuradio: fix build with boost 1.70.0

Fixes:
 - http://autobuild.buildroot.org/results/4109881eab99fd720e97f1070c374e67dd881b85

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/linux-tools/perf: add dependency on 32-bit sync builtins

Sync builtins ops are strictly required by perf utility as it uses
atomic_xxx() functions.

Otherwise building fails like that:
|.../output/host/opt/ext-toolchain/bin/../lib/gcc/arc-snps-linux-uclibc/8.2.1/../../../../arc-snps-linux-uclibc/bin/ld:
|.../output/build/linux-5.0.7/tools/perf/libperf.a(libperf-in.o): in function `atomic_cmpxchg':
|.../output/build/linux-5.0.7/tools/include/asm-generic/atomic-gcc.h:69: undefined reference to `__sync_val_compare_and_swap_4'

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Thomas: drop Config.in comment]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ghostscript: fix parallel build

Fixes:
 - http://autobuild.buildroot.org/results/eb33b41d1b267d0207a6e3a9f5ca7f79b2f51887

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/freerdp: fix build without xfixes

Fixes:
 - http://autobuild.buildroot.org/results/69245e574787bada718c52c805ec137041dc233d

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/xserver_xorg-server: fix build without glx

Fixes:
 - http://autobuild.buildroot.org/results/397f8098c57fc6c88aa12dc8d35ebb1b933d52ef

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gstreamer1/gst1-plugins-ugly: fix typo in mk file

BR2_PACKAGE_GST_PLUGINS_UGL1_PLUGIN_XINGMUX needs to be
BR2_PACKAGE_GST1_PLUGINS_UGLY_PLUGIN_XINGMUX

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/git: fix build with NLS enabled

git fails to build with NLS enabled because of weak check
for gettext in configure.ac. The AC_CHECK_LIB(c, gettext ...)
is used to set LIBC_CONTAINS_LIBINTL variable. If the variable
is set then '-libs' is not passed to the linker, but this variable
is set to 'Yes' even libc implementation does not provide libintl
support, the AC_CHECK passes because gcc has gettext builtin.

So use instead AC_LINK_IFELSE with included libintl.h because it
makes gettext to unfold as libintl_gettext which causes AC_CHECK
to fail for cases when gettext is not provided by libc.

Tested by ./utils/test-pkg with NLS disabled/enabled.

Fixes:
http://autobuild.buildroot.net/results/091b790ca6f5b46d5d29211dc1cb3ff05b62a965
http://autobuild.buildroot.net/results/a69b58b35b270fdd2df9b076e7030bb594520197
http://autobuild.buildroot.net/results/f104c4e6ff41b1dd175f2d27f3b4ea7c9b61f7c5
http://autobuild.buildroot.net/results/ee12bdba398a139995de5f6f6718be6a493541d9
http://autobuild.buildroot.net/results/74fa6b2bfbb1301e35c9dd1bbc04856c1cbf25f2

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/i2pd: bump to version 2.24.0

Fix build with boost 1.70.0

Fixes:
 - http://autobuild.buildroot.org/results/b35466da7308e60024cec743728aef045dc24405

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/boost: don't install boost cmake files

Since version 1.70.0, boost installs its own cmake files which are
utterly broken so don't install them otherwise all cmake packages using
boost (host-thrift, domoticz, i2pd ...) will fail because
BOOST_INCLUDE_DIRS will be empty

Fixes:
 - http://autobuild.buildroot.org/results/4ada26bab5c1e6504c7d8c92672326ced1d336df

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ncmpc: bump to version 0.34

Fix build with boost 1.70.0

Fixes:
 - http://autobuild.buildroot.org/results/eb2a8fc46ca24352ca5e513ed1d05344d884c85b

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/botan: fix build with boost 1.70.0

Fixes:
 - http://autobuild.buildroot.org/results/ca9dfcfd34365aa1476b718d4897a2e75f6983ac

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/wireshark: fix static build with pcap

Use pkg-config to find pcap dependencies

Fixes:
 - http://autobuild.buildroot.org/results/277a24ad543a8f54cc8afde4f359f5d77b42eb7f

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

qt5: Remove *.la/*.prl fixup script

After fixing Prefix in our custom qt.conf, Qt computes and embeds the
correct sysroot prefixed pathes in all *.la and *.prl files.
So remove fixup of
- *.la files because they are generically fixed anyway
- *.prl files because occurences of absolute /usr/lib were no longer
observed

Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

qt5base: Fix inconsistencies when overriding qmake properties

When querying the qmake properties with our custom qt.conf present, I
noticed that they were different from the built-in ones (without
qt.conf). Most notably QT_INSTALL_PREFIX was a concatenated string of
two absolute paths (hostdir + sysroot).

This is due to Prefix being set to our HOST_DIR and HostPrefix not being
set at all. Supposedly this was also the root cause of the initial
problem with qt.conf.in, because once Prefix and HostPrefix are set to
their correct values, re-setting all the other paths to their defaults
is no longer necessary. (However, since our paths for Headers, Plugins
and Examples are non-default, they still have to be explicitely set.)

There is one exception to this: omitting 'Settings' leads to the
CONFIGURATION path being plain /usr, whereas the default without qt.conf
is /usr/etc/xdg. But even if storing configs directly under /usr seems a
bit strange we keep it that way, because our qt.conf did set it to /usr
before and we don't want to break existing users.

Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/syslog-ng: fix S01syslog-ng indentation

Don't mix spaces and tabs, use only tabs

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/sysklogd: fix S0{1sys, 2k}logd indentation

Don't mix spaces and tabs, only use tabs

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/rsyslog: fix S01rsyslogd indentation

Don't mix spaces and tabs, only use tabs

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

board/freescale: single T1xxx/2xxx readme.txt

The readme.txt would contain similar content for either processor
family, so this patch consolidates the usage and adds the new
T2080 notes.

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

configs/freescale_t2080_qds_rdb_defconfig: new board

The board is setup to track upstream Linux as the official
vendor support was complete(depricated) at 4.1 via NXP SDKs.

The target does not build uboot and assumes the user still uses the NXP
suggested prebuilts in the SDK2.0 (last release for PowerPC). If a
uboot is required, the source for SDK2.0 can be found in the following
repo.
http://git.freescale.com/git/cgit.cgi/ppc/sdk/u-boot.git/tag/?id=fsl-sdk-v2.0-1703

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Arnout: update .gitlab-ci.yml]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/madplay: fix build when NLS is enabled

MKINSTALLDIRS is not automatically called by autotools when
autoreconfigured.
This leads to the following error during install:

`/bin/sh @MKINSTALLDIRS@ /home/dawncrow/buildroot-test/scripts/instance-0/output/target/usr/share
/bin/sh: 0: Can't open @MKINSTALLDIRS@`

because @MKINSTALLDIRS@ doesn't get substituted during autoreconf.

This particular command only gets invoked when NLS is enabled.

Add patch that explicitly calls AM_MKINSTALLDIRS macro to substitute
every @MKINSTALLDIRS@ occurence in *.in Makefile.

Patch is not sent upstream since upstream is dead.

Fixes:
http://autobuild.buildroot.net/results/744/7447c03426556f787f20f7ab2d36f0cacc4af1bd/

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

.gitlab-ci.yml: add andes_ae3xx_defconfig

It was forgotten when this defconfig was added.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

utils/genrandconfig: prevent selecting libffi on nds32

libffi does not have support for the nds32 architecture, so let's
disallow libffi on this CPU architecture for the moment.

Fixes:

  http://autobuild.buildroot.net/results/12803a705586e82fdfb49013da2eb3b9879ccd45/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/binutils: disable on nds32

Upstream binutils does not yet have support for the nds32
architecture, so let's disable binutils for the target on this
architecture for the moment.

Fixes:

  http://autobuild.buildroot.net/results/1b18acb11db4d6c4198deb7385aff3d4d524c37e/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/easydbus: bump to version b86721147b265dfefc9a857669408cb6eb3d6560

Remove patch (already in version)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/sane-backends: remove unneeded first patch

This patch is not needed since version 1.0.25 and
https://gitlab.com/sane-project/backends/commit/8434ea91623f313eeb68ac301f7c7abf65976fc8

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/xl2tp: bump to version 1.3.14

Remove patch (already in version)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/boost: bump to version 1.70.0

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/openjdk: only support a single variant at a time

The Zero variant won't build with the server or client also selected at the same
time, and expressing this in the Config.in would be too complicated to do.
Even so, selecting multiple variants doesn't seem to be that important in the
context of Buildroot.

This patch removes the ability to select multiple variants in favor
of just selecting one. The default is server as that is what all of the major
distributions currently use as the default as well.

Fixes:
http://autobuild.buildroot.net/results/a45cfa9b3602fd05f6adbf070a1bad6510975c36

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/config-fragments/autobuild: test the Andes nds32 architecture

Signed-off-by: Che-Wei Chuang <cnoize@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Nylon Chen <nylon7@andestech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/andes_ae3xx: new defconfig

Add Andes 32-bit defconfig for AE3XX platform.

Signed-off-by: Che-Wei Chuang <cnoize@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Nylon Chen <nylon7@andestech.com>
[Thomas:
 - fix commit title to match the defconfig name
 - use the external toolchain package]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain/toolchain-external-andes-nds32: new package

This commit adds a new package for the Andes external toolchain for
the nds32 Little Endian architecture.

https://github.com/vincentzwc/prebuilt-nds32-toolchain/releases/download/20180521/nds32le-linux-glibc-v3-upstream.tar.gz

Signed-off-by: Che-Wei Chuang <cnoize@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Nylon Chen <nylon7@andestech.com>
[Thomas:
 - rename .mk and .hash files to carry the proper package name
 - fix <pkg>_SITE variable, which was incorrect
 - add prompt in Config.in
 - add missing include of Config.in in toolchain/toolchain-external/Config.in
 - add missing selects for RPC and SSP, since the toolchain supports
   both
 - drop BR2_TOOLCHAIN_EXTERNAL_URL option, the toolchain URL is
   provided by the .mk file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

arch: add support for Andes 32-bit (nds32)

This commit provides basic support for the Andes 32-bit (nds32)
architecture.

Signed-off-by: Che-Wei Chuang <cnoize@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Nylon Chen <nylon7@andestech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/go: fix building host go toolchain when target isn't supported

The go toolchain can cross-compile by default. So most of the time,
building a toolchain that supports a target, allows us to also build go
binaries for the host. This is how support for host go packages was
added: we use the same toolchain that was initially built only for
target.

But we might want to build a go binary for the host, when compiling a
target for which go isn't supported. Then, building host-go will fail:
by default, we build go for a specific target, and give the toolchain
bootstrap scripts the cross compiler we'll use.

This change modifies this behaviour: we only assume the go toolchain is
cross-capable if we know the current target is supported. Otherwise this
is a simple host go tool. We don't need to set any of the options needed
for cross-compilation in that case.

Thus, only set all the target-specific go options under a condition that
the target arch is supported. The only option we still set is
HOST_GO_CGO_ENABLED, and we always set it to enabled.

It was also considered to create a separate package to build the
go-for-host compiler which would be used for host-go-packages, but that
would lead to a lot of duplication and is completely unnecessary.

Fixes:
http://autobuild.buildroot.net/results/98b9c7aaff2af4d19adfedac00b768d92530ce94
http://autobuild.buildroot.net/results/bed228995ce3778720f991df9b41345a7c724a46
http://autobuild.buildroot.net/results/3b3ea148165b96513ea511ee0d4adb334a6afac8

Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/binutils: fix loops relaxation in bare sections

The commit 197b5f9d1c23 ("package/binutils: fix loops relaxation in
xtensa gas") changed the way loop opcodes are relaxed resulting in build
failures in hand-made assembly code that has loops in sections without
.literal_position pseudo op or equivalent construct. This e.g. breaks
xtensa linux kernel build.

Fix that by adding literal position to the beginning of every section.

Fixes: 197b5f9d1c23 ("package/binutils: fix loops relaxation in xtensa
gas")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/sslh: bump to version 1.20

- Add hash for license file
- Enable parallel build: it has been fixed since version 1.19b and
  https://github.com/yrutschle/sslh/commit/70a2ea926efc8ca455b08d230b90789a57bc29c6

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/check: bump to version 0.12

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-sentry-sdk: bump to version 0.7.10

Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-schedule: bump to version 0.6.0

Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/openjdk: remove mips support

The mips-port project has been abandoned for some time:

  https://mail.openjdk.java.net/pipermail/mips-port/2018-August/000082.html

Fixes:

  http://autobuild.buildroot.net/results/1059026c9b5f503684fe1589cd43d25a8484290b/

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/wireshark: re-enable for static build configurations

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: explain why ENABLE_STATIC=OFF is the right thing]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/sudo: bump to version 1.8.27

Update hash of license file:
 - update in year
 - add arc4random.c, arc4random_uniform.c and getentropy.c license (ISC)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/php: fix how external PCRE2 JIT is enabled

This patch adds ac_cv_have_pcre2_jit cache variable to avoid
the tests running on the host system during cross-compiling.

Signed-off-by: Artem Panfilov <panfilov.artyom@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pcre2: jit needs threads

Add a BR2_PACKAGE_PCRE2_JIT_ARCH_SUPPORTS to be able to use it in the
comment

Fixes:
 - http://autobuild.buildroot.org/results/547be5264effaf27c7f85ece88c5f5f792abd910

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/luasec: bump to version 0.8

the license file hash changed due to a copyright year update

-LuaSec 0.7 license
-Copyright (C) 2006-2018 Bruno Silvestre, UFG
+LuaSec 0.8 license
+Copyright (C) 2006-2019 Bruno Silvestre, UFG

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ruby: security bump to version 2.4.6

Fixes the following security issues:

- CVE-2019-8320: Delete directory using symlink when decompressing tar
- CVE-2019-8321: Escape sequence injection vulnerability in verbose
- CVE-2019-8322: Escape sequence injection vulnerability in gem owner
- CVE-2019-8323: Escape sequence injection vulnerability in API response handling
- CVE-2019-8324: Installing a malicious gem may lead to arbitrary code execution
- CVE-2019-8325: Escape sequence injection vulnerability in errors

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/tpm2-tss: bump version to 2.1.3

Fixes a number of issues discovered post-2.1.2. For details, see:
https://github.com/tpm2-software/tpm2-tss/releases/tag/2.1.3

Drop 002-configure.ac-switch-default-ESAPI-crypto-backend-to-.patch as this
issue is now fixed upstream.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/nginx: bump version to 1.15.12

The license file hash has been modified due to copyright year updates:

- * Copyright (C) 2002-2018 Igor Sysoev
- * Copyright (C) 2011-2018 Nginx, Inc.
+ * Copyright (C) 2002-2019 Igor Sysoev
+ * Copyright (C) 2011-2019 Nginx, Inc.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rpi-firmware: bump version to ebf7b40cdc

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/raspberrypi*: bump kernel version to 5eeff139ea

Now based on 4.19.23 (from 4.14.98) and bump linux header
version accordingly and needs host openssl.

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rpi-firmware: bump version to 83977fe3b6

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/raspberrypi*: bump kernel version to 877656cd14

Now based on 4.14.98 (from 4.14.95)

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/linux-firmware: move BR2_PACKAGE_LINUX_FIRMWARE_TI_CC2560 to Bluetooth

This moves the BR2_PACKAGE_LINUX_FIRMWARE_TI_CC2560 option to the
Bluetooth section of the config file. This chip is Bluetooth-only, so
it belongs there instead of with the Wi-Fi/Bluetooth combo chips.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ffmpeg: enable Intel QuickSync support

Signed-off-by: Louis-Paul Cordier <lpdev@cordier.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/intel-mediasdk: new package

Signed-off-by: Louis-Paul Cordier <lpdev@cordier.org>
[Thomas:
 - add missing Config.in comment
 - add missing select BR2_PACKAGE_LIBDRM_INTEL, needed as the code
   uses a header file installed only when libdrm-intel is enabled
 - add patch to drop -fstack-protector in order to support toolchains
   without SSP support]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/intel-mediadriver: new package

Signed-off-by: Louis-Paul Cordier <lpdev@cordier.org>
[Thomas:
 - add missing Config.in comments
 - fix minor nit in the _LICENSE variable
 - add patch to drop hardening options, especially -fstack-protector,
   which was causing the build to fail on toolchains without SSP
   support]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pkgconf: bump to version 1.6.1

Other changes:
  - Add a hash for the license file.

Tested against:
  - libsoup
  - X11r7
  - dbus-glib
  - atk

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/wireshark: add systemd optional dependency

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/wireshark: bump to version 3.0.1

- Remove patch (already in version)
- Move package to cmake infrastructure
- --disables-guides option is not avaiable with cmake
- gtk ui is no more available
- QT UI now requires:
  - qt5multimedia and qt5svg at build time
  - qt5fontconfig, qt5png and udev at runtime
- Add host-python3 dependency
- Add a hook to build host-lemon
- Disable static build (some libraries such as
  plugins/3.0/codecs/l16mono.so does not support static building)
- Disable new sdjournal feature (will be enabled in a follow up patch)

Fixes:
 - http://autobuild.buildroot.org/results/bdbfd72a5da7e02e85159ee62bf56067adbc8931

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/busybox: fix S0{1sys, 2k}logd indentation

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/systemd: update BR2_PACKAGE_SYSTEMD_ARCH_SUPPORTS

systemd supports:
 - nios2 since version 230 and
 https://github.com/systemd/systemd/commit/b79660e6acb964f94ddba0ea4e1182215934dfc3
 - riscv sinc version 232 and
 https://github.com/systemd/systemd/commit/171b53380085b1288b03b19a2b978f36a5c003d0
 - aarch64_be (tested with qemu_aarch64_virt_defconfig reconfigured to
 aarch64_be)
 - sparc64 (tested with qemu_sparc64_sun4u_defconfig)
 - mips64 and mips64el (tested with qemu_mips64el_malta_defconfig)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/systemd-bootchart: add BR2_PACKAGE_SYSTEMD_BOOTCHART_ARCH_SUPPORTS

Since commit f93596d8ba82354efb545fe91449627e6c896ce1, systemd is
enabled on arc however systemd-bootchart is not available on this
architecture so add a BR2_PACKAGE_SYSTEMD_BOOTCHART_ARCH_SUPPORTS from
the information retrieved in src/architecture.h

Fixes:
 - http://autobuild.buildroot.org/results/84fb51212abf99faa2b7a46b8c44c42a3ca1201c

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

DEVELOPERS: add Matt Weber to dacapo pkg

Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>