git.libre-soc.org Git - binutils-gdb.git/log

gdb: Use string_printf to format int fields instead of a fixed size buffer

This patch removes a FIXME comment from cli-out.c, now instead of
formatting integers into a fixed size buffer we build a std::string
and extract the formatted integer from that.

The old code using a fixed size buffer was probably fine (the integer
was not going to overflow it) and probably slightly more efficient
(avoids building a std::string) however, given we already have utility
code in GDB that will allow the 'FIXME' comment to be removed, it
seems like an easy improvement.

gdb/ChangeLog:

* cli-out.c (cli_ui_out::do_field_int): Use string_printf rather
than a fixed size buffer.

gdb: Respect field width and alignment for 'fmt' fields in CLI output

Currently the method 'cli_ui_out::do_field_fmt' has this comment:

  /* This is the only field function that does not align.  */

The reality is even slightly worse, the 'fmt' field type doesn't
respect either the field alignment or the field width.  In at least
one place in GDB we attempt to work around this lack of respect for
field width by adding additional padding manually.  But, as is often
the case, this is leading to knock on problems.

Conside the output for 'info breakpoints' when a breakpoint has
multiple locations.  This example is taken from the testsuite, from
test gdb.opt/inline-break.exp:

  (gdb) info breakpoints
  Num     Type           Disp Enb Address            What
  1       breakpoint     keep y   <MULTIPLE>
  1.1                     y     0x00000000004004ae in func4b at /src/gdb/testsuite/gdb.opt/inline-break.c:64
  1.2                     y     0x0000000000400682 in func4b at /src/gdb/testsuite/gdb.opt/inline-break.c:64

The miss-alignment of the fields shown here is exactly as GDB
currently produces.

With this patch 'fmt' style fields are now first written into a
temporary buffer, and then written out as a 'string' field.  The
result is that the field width, and alignment should now be respected.
With this patch in place the output from GDB now looks like this:

  (gdb) info breakpoints
  Num     Type           Disp Enb Address            What
  1       breakpoint     keep y   <MULTIPLE>
  1.1                         y   0x00000000004004ae in func4b at /src/gdb/testsuite/gdb.opt/inline-break.c:64
  1.2                         y   0x0000000000400682 in func4b at /src/gdb/testsuite/gdb.opt/inline-break.c:64

This patch has been tested on x86-64/Linux with no regressions,
however, the testsuite doesn't always spot broken output formatting or
alignment.  I have also audited all uses of 'fmt' fields that I could
find, and I don't think there are any other places that specifically
try to work around the lack of width/alignment, however, I could have
missed something.

gdb/ChangeLog:

* breakpoint.c (print_one_breakpoint_location): Reduce whitespace,
and remove insertion of extra spaces in GDB's output.
* cli-out.c (cli_ui_out::do_field_fmt): Update header comment.
Layout field into a temporary buffer, and then output it as a
string field.

gdb/testsuite/ChangeLog:

* gdb.opt/inline-break.exp: Add test that info breakpoint output
is correctly aligned.

Document language choice in 'info [functions|variables|types]|rbreak' commands

doc/ChangeLog
2018-11-20 Philippe Waroquiers <philippe.waroquiers@skynet.be>

* gdb.texinfo (Examining the Symbol Table): Document language choice
for 'info types|functions|variables' commands.
(Setting Breakpoints): Document language choice to print
the functions in which a breakpoint is set.

Add a test to verify info [functions|variables|types]|rbreak respect language_mode.

2018-11-20 Philippe Waroquiers <philippe.waroquiers@skynet.be>

* gdb.ada/info_auto_lang.exp: New testcase.
* gdb.ada/info_auto_lang/global_pack.ads: New file.
* gdb.ada/info_auto_lang/proc_in_ada.adb: New file.
* gdb.ada/info_auto_lang/some_c.c: New file.

Use scoped_switch_to_sym_language_if_auto in symtab.c to switch language.

Use scoped_switch_to_sym_language_if_auto in treg_matches_sym_type_name to
replace the local logic that was doing the same as the new class
scoped_switch_to_sym_language_if_auto.

Use scoped_switch_to_sym_language_if_auto inside print_symbol_info, so
that symbol information is printed in the symbol language when
language mode is auto.
This modifies the behaviour of the test dw2-case-insensitive.exp,
as the function FUNC_lang is now printed with the Fortran syntax
(as declared in the .S file).

gdb/ChangeLog
2018-11-20 Philippe Waroquiers <philippe.waroquiers@skynet.be>

* symtab.c (treg_matches_sym_type_name): Use
scoped_switch_to_sym_language_if_auto instead of local logic.
(print_symbol_info): Use scoped_switch_to_sym_language_if_auto
to switch to SYM language when language mode is auto.

gdb/testsuite/ChangeLog
2018-11-20 Philippe Waroquiers <philippe.waroquiers@skynet.be>

* gdb.dwarf2/dw2-case-insensitive.exp: Update due to auto switch to
FUNC_lang language syntax.

Add class scoped_switch_to_sym_language_if_auto.

The class scoped_switch_to_sym_language_if_auto allows to switch in a scope
the current language to the language of a symbol when language mode is
set to auto.

2018-11-20 Philippe Waroquiers <philippe.waroquiers@skynet.be>

* language.h (scoped_switch_to_sym_language_if_auto): New class.

Test case for 'info variables|functions' with minimal symbols.

2018-11-20 Philippe Waroquiers <philippe.waroquiers@skynet.be>

* gdb.base/info_minsym.c: New file.
* gdb.base/info_minsym.exp: New file.

Fix regression 'info variables' does not show minimal symbols.

12615cba8411c8 Add [-q] [-t TYPEREGEXP] [NAMEREGEXP] args to info [args|functions|locals|variables]
introduced a regression that minimal symbols were not listed anymore, due to a wrong
condition checking the absence of a type regexp in the loop scanning the minimal symbols.

Instead, before entering the loop scanning the minimal symbols, check that we
do not have a type regexp, as we will never match a minimal symbol with
this type regexp.

With the fix in this patch, for this part of the code, we basically go back
to the GDB 8.2 logic, with just the addition of
&& !treg.has_value ())
to 'enter' in the minsym case.
This should ensure that at least there is no regression compared to 8.2,
when not using the new type matching argument, as there was no treg in 8.2.

2018-11-20 Philippe Waroquiers <philippe.waroquiers@skynet.be>

* symtab.c (search_symbols): Properly check absence of type regexp
before entering the loop scanning the minimal symbols.

Fix gdb/ChangeLog formatting and date

GDB: S12Z: new function s12z_extract_return_value

Make gdb aware of the return values of functions which
return in registers.

gdb/ChangeLog:
* s12z-tdep.c (s12z_extract_return_value): New function.
(inv_reg_perm) New array.
(s12z_return_value): Populate readbuf if non-null.

Fix previous change in filestuff.c

gdb/ChangeLog:

* common/filestuff.c (O_NOINHERIT): Define if not defined.

Avoid "Invalid parameter passed to C runtime function" warning

This warning was displayed by OutputDebugString on MinGW when
GDB was being debugged natively.

gdb/ChangeLog:

* common/filestuff.c (gdb_fopen_cloexec): Disable use of "e" mode
with 'fopen' also if O_CLOEXEC is equal to O_NOINHERIT, to cater
to MinGW fixed by Gnulib.

readelf: Prune gaps warning in build notes

Since some object files may not have build notes, it is normal to have
gaps in build notes.

PR binutils/23898
* testsuite/lib/binutils-common.exp (prune_warnings_extra):
Prune gaps in build notes.

GDB: S12Z: Add assertion

gdb/ChangeLog:

* s12z-tdep.c (s12z_frame_cache): Add an assertion.

Remove displaced_step_inferior_state::next

Commit

39a36629f68e ("Use std::forward_list for displaced_step_inferior_states")

missed removing the "next" field, while changing the hand-made linked
list in favor of std::forward_list. This patch fixes that.

gdb/ChangeLog:

* infrun.c (displaced_step_inferior_state) <next>: Remove.

Automatic date update in version.in

Change get_filename_and_charpos to return void

The return value from get_filename_and_charpos is never used, so this
patch changes it to return void.

gdb/ChangeLog
2018-11-19 Tom Tromey <tom@tromey.com>

* source.c (get_filename_and_charpos): Return void.

Fix inaccuracies in "info skip" help

"help info skip" uses "skip info" in its examples, which is not the same
(it ends up creating new skips). Also, the Type column that is referred
to doesn't exist today.

gdb/ChangeLog:

* skip.c (_initialize_step_skip): Fix "info skip" help.

Handle TYPE_CODE_PTR when printing Rust types

This changes the Rust type printers to handle TYPE_CODE_PTR.  The
current approach is not ideal, because currently the code can't
distinguish between mut and const, or between pointers and references.
(These are debuginfo deficiencies, for which there are rustc bugs on
file.)

Meanwhile, this at least clears up the case seen in PR rust/23625.

Tested on x86-64 Fedora 28.  The nightly compiler gives the best
results, but I regression-tested with stable and beta as well.

gdb/ChangeLog
2018-11-16  Tom Tromey  <tom@tromey.com>

PR rust/23625:
* rust-lang.c (rust_internal_print_type): Handle TYPE_CODE_PTR.

gdb/testsuite/ChangeLog
2018-11-19  Tom Tromey  <tom@tromey.com>

PR rust/23625:
* gdb.rust/simple.exp: Add ptype test.  Update expected output.
* gdb.rust/expr.exp: Update expected output.  Change one test.

Fix gdb.rust/simple.rs for more recent compilers

gdb.rust/simple.exp will fail when run with a recent version of rustc.
This patch fixes the test case so that it will continue to run.

Tested on x86-64 Fedora 28.

I also temporarily backed out the rust-lang.c from
commit 098b2108a2b61531c0bc8ea16854f773083a95d7, and verified that
this updated test still would have provoked the original bug.

gdb/testsuite/ChangeLog
2018-11-19 Tom Tromey <tom@tromey.com>

* gdb.rust/simple.rs: Don't initialize empty_enum_value.

Use std::forward_list for displaced_step_inferior_states

Use std::forward_list instead of manually implemented list. This
simplifies a bit the code, especially around removal.

Regtested on the buildbot. There are some failures as always, but I
think they are unrelated.

gdb/ChangeLog:

* infrun.c (displaced_step_inferior_states): Change type to
std::forward_list.
(get_displaced_stepping_state): Adjust.
(displaced_step_in_progress_any_inferior): Adjust.
(add_displaced_stepping_state): Adjust.
(remove_displaced_stepping_state): Adjust.

GDB: Add ChangeLog entry inadvertently omitted from commit.

gdb.base/warning.exp tweaks

#1- Check that the warning is emitted.

#2- Avoid overriding INTERNAL_GDBFLAGS, as per documentated in
    gdb/testsuite/README:

~~~
The testsuite does not override a value provided by the user.
~~~

We don't actually need to tweak INTERNAL_GDBFLAGS, we just need to
append out -data-directory to GDBFLAGS, because each passed
-data-directory option leads to a call to the warning:

$ ./gdb -data-directory=foo -data-directory=bar
Warning: foo: No such file or directory.
Warning: bar: No such file or directory.
[...]

gdb/ChangeLog
2018-11-19  Pedro Alves  <palves@redhat.com>

* gdb.base/warning.exp: Don't override INTERNAL_FLAGS.  Use
gdb_spawn_with_cmdline_opts instead of gdb_start.  Check that we
see the expected warning.

Automatic date update in version.in

Fix ia64-linux-nat.c

PR build/23814 points out that ia64-linux-nat.c will not compile any
more.  This patch fixes the problem.  Thanks to Andreas Schwab for
trying the patch.

gdb/ChangeLog
2018-11-18  Tom Tromey  <tom@tromey.com>

PR build/23814:
* target-delegates.c: Rebuild.
* ia64-linux-nat.c (class ia64_linux_nat_target)
<have_steppable_watchpoint>: Use override.  Return true, not 1.
(ia64_linux_nat_target::can_use_hw_breakpoint): Rename.  Remove
"self" argument.
(ia64_linux_nat_target::low_new_thread): Rename.
(class ia64_linux_nat_target) <read_description>: Don't declare.
* target.h (struct target_ops) <have_steppable_watchpoint>: Return
bool.

Automatic date update in version.in

Aarch64: Fix segfault when casting dummy calls

The following will segfault on aarch64 if foo is in another object,
was compiled as c++ and has no debug symbols:
(gdb) p (int)foo()

This is because aarch64_push_dummy_call determines the return type
of the function and then does not check for null pointer.

A null pointer for the return type means the call has no debug
information. For the code to get here, then the call must have
been cast, otherwise we'd error out sooner. In the case of a
no-debug-info call cast, the return type is the type the user
had cast the call to, but we do not have that information
available here.

However, aarch64_push_dummy_call only requires the return type in
order to calculate lang_struct_return. This information is available
in the return_method enum. The fix is to simply use this instead.

Adds testcase to check calls across objects, with all combinations
of c, c++, debug and no debug.

gdb/ChangeLog:

PR gdb/22736:
* aarch64-tdep.c (aarch64_push_dummy_call): Remove
lang_struct_return code.

gdb/testsuite/ChangeLog:

PR gdb/22736:
* gdb.cp/infcall-nodebug-lib.c: New test.
* gdb.cp/infcall-nodebug-main.c: New test.
* gdb.cp/infcall-nodebug.exp: New file.

Pass return_method to _push_dummy_call

gdb/ChangeLog:

* aarch64-tdep.c (aarch64_push_dummy_call): Replace arg with
return_method.
* alpha-tdep.c (alpha_push_dummy_call): Likewise.
* amd64-tdep.c (amd64_push_arguments): Likewise.
(amd64_push_dummy_call): Likewise.
* amd64-windows-tdep.c (amd64_windows_push_arguments): Likewise.
* arc-tdep.c (arc_push_dummy_call): Likewise.
* arm-tdep.c (arm_push_dummy_call): Likewise.
* avr-tdep.c (avr_push_dummy_call): Likewise.
* bfin-tdep.c (bfin_push_dummy_call): Likewise.
* cris-tdep.c (cris_push_dummy_call): Likewise.
* csky-tdep.c (csky_push_dummy_call): Likewise.
* frv-tdep.c (frv_push_dummy_call): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* gdbarch.sh (gdbarch_push_dummy_call): Replace arg with
return_method.
* h8300-tdep.c (h8300_push_dummy_call): Likewise.
* hppa-tdep.c (hppa32_push_dummy_call): Likewise.
(hppa64_push_dummy_call): Likewise.
* i386-darwin-tdep.c (i386_darwin_push_dummy_call): Likewise.
* i386-tdep.c (i386_push_dummy_call): Likewise.
* ia64-tdep.c (ia64_push_dummy_call): Likewise.
* infcall.c (call_function_by_hand_dummy): Likewise.
* iq2000-tdep.c (iq2000_push_dummy_call): Likewise.
* lm32-tdep.c (lm32_push_dummy_call): Likewise.
* m32c-tdep.c (m32c_push_dummy_call): Likewise.
* m32r-tdep.c (m32r_push_dummy_call): Likewise.
* m68hc11-tdep.c (m68hc11_push_dummy_call): Likewise.
* m68k-tdep.c (m68k_push_dummy_call): Likewise.
* mep-tdep.c (mep_push_dummy_call): Likewise.
* mips-tdep.c (mips_eabi_push_dummy_call): Likewise.
(mips_n32n64_push_dummy_call): Likewise.
(mips_o32_push_dummy_call): Likewise.
(mips_o64_push_dummy_call): Likewise.
* mn10300-tdep.c (mn10300_push_dummy_call): Likewise.
* msp430-tdep.c (msp430_push_dummy_call): Likewise.
* nds32-tdep.c (nds32_push_dummy_call): Likewise.
* nios2-tdep.c (nios2_push_dummy_call): Likewise.
* or1k-tdep.c (or1k_push_dummy_call): Likewise.
* ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Likewise.
(ppc64_sysv_abi_push_dummy_call): Likewise.
* ppc-tdep.h (ppc_sysv_abi_push_dummy_call): Likewise.
(ppc64_sysv_abi_push_dummy_call): Likewise.
* riscv-tdep.c (riscv_push_dummy_call): Likewise.
* rl78-tdep.c (rl78_push_dummy_call): Likewise.
* rs6000-aix-tdep.c (rs6000_push_dummy_call): Likewise.
* rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call): Likewise.
* rx-tdep.c (rx_push_dummy_call): Likewise.
* s390-tdep.c (s390_push_dummy_call): Likewise.
* score-tdep.c (score_push_dummy_call): Likewise.
* sh-tdep.c (sh_push_dummy_call_fpu): Likewise.
(sh_push_dummy_call_nofpu): Likewise.
* sparc-tdep.c (sparc32_store_arguments): Likewise.
(sparc32_push_dummy_call): Likewise.
* sparc64-tdep.c (sparc64_store_arguments): Likewise.
(sparc64_push_dummy_call): Likewise.
* spu-tdep.c (spu_push_dummy_call): Likewise.
* tic6x-tdep.c (tic6x_push_dummy_call): Likewise.
* tilegx-tdep.c (tilegx_push_dummy_call): Likewise.
* v850-tdep.c (v850_push_dummy_call): Likewise.
* vax-tdep.c (vax_push_dummy_call): Likewise.
* xstormy16-tdep.c (xstormy16_push_dummy_call): Likewise.
* xtensa-tdep.c (xtensa_push_dummy_call): Likewise.

Use enum for return method for dummy calls

In call_function_by_hand_dummy, struct_return and hidden_first_param_p
are used to represent a single concept. Replace with an enum.

gdb/ChangeLog:

* gdbarch.sh (enum function_call_return_method): Add enum.
* gdbarch.h: Regenerate.
* infcall.c (call_function_by_hand_dummy): Replace vars with enum.

(Another) Updated Spanish translation for the ld subdirectory.

* po/es.po: Updated Spanish translation.

Automatic date update in version.in

Move copy_bitwise unittests to own unittest file

Now that copy_bitwise has been made public, and considering that
its implementation could move to a different file again in the future,
this patch moves its unittest to its own file in gdb/unittests.

gdb/ChangeLog:

        * unittests/copy_bitwise-selftests.c: New file.
        * utils.c (selftests::bits_to_str, selftests::check_copy_bitwise)
        (selftests::copy_bitwise_tests): Delete, moving this code to
        unittests/copy_bitwise-selftests.c instead.
        (_initialize_utils): Do not register copy_bitwise tests.
        * Makefile.in (SUBDIR_UNITTESTS_SRCS): Add
        unittests/copy_bitwise-selftests.c.

Tested on x86_64-linux using the official testsuite, but also by
verifying that "maintenance selftests" still runs the copy_bitwise
tests.

Updated Spanish translation for the ld subdirectory.

ld * po/es.po: Updated Spanish translation.

Automatic date update in version.in

delete ada-lang.c::move_bits, sharing and re-using copy_bitwise instead

This patch deletes ada-lang.c's move_bits function entirely, and
replaces all calls to it by calls to copy_bitwise instead. Because
the latter function was declared locally inside dwarf2loc.c, this
patch also move the function to a common area, and makes it non-static.

gdb/ChangeLog:

        * ada-lang.c (move_bits): Delete. Update all callers to use
        copy_bitwise instead.
        * dwarf2loc.c (copy_bitwise, bits_to_str::bits_to_str)
        (selftests::check_copy_bitwise, selftests::copy_bitwise_tests):
        Move from here to utils.c.
        (_initialize_dwarf2loc): Remove call to register copy_bitwise
        selftests.
        * utils.h (copy_bitwise): Add declaration.
        * utils.c (copy_bitwise, bits_to_str::bits_to_str)
        (selftests::check_copy_bitwise, selftests::copy_bitwise_tests):
        Moved here from dwarf2loc.c.
        (_initialize_utils): Register copy_bitwise selftests.

Tested on x86_64-linux, no regression. Also tested using AdaCore's
testsuite on a collection of small endian and big endian platforms.

RISC-V: Fix unnamed arg alignment in registers.

For riscv64-linux target, second half of fix for
FAIL: gdb.base/gnu_vector.exp: call add_various_floatvecs

Unnamed arguments with 2*XLEN alignment are passed in aligned register pairs.

gdb/
* riscv-tdep.c (struct riscv_arg_info): New field is_unnamed.
(riscv_call_arg_scalar_int): If unnamed arg with twice xlen alignment,
then increment next_regnum if odd.
(riscv_arg_location): New arg is_unnamed.  Set ainfo->is_unnamed.
(riscv_push_dummy_call): New local ftype.  Call check_typedef to set
function type.  Pass new arg to riscv_arg_location based on function
type.
(riscv_return_value): Pass new arg to riscv_arg_location.

RISC-V: Handle vector type alignment.

For riscv64-linux target, first half of fix for
FAIL: gdb.base/gnu_vector.exp: call add_various_floatvecs

GCC gives vectors natural aligment based on total size, not element size,
bounded by the maximum supported type alignment.

gdb/
* riscv-tdep.c (BIGGEST_ALIGNMENT): New.
(riscv_type_alignment) <TYPE_CODE_ARRAY>: If TYPE_VECTOR, return min
of TYPE_LENGTH and BIGGEST_ALIGNMENT.

RISC-V: Give stack slots same align as XLEN.

For riscv64-linux target, fixes
FAIL: gdb.base/gnu_vector.exp: call add_many_charvecs

Ensure that stack slots are always the same alignment as XLEN by rounding
up arg align to xlen.

gdb/
* riscv-tdep.c (riscv_call_arg_scalar_int): Use std::min when
setting len. New local align, set to max of arg align and xlen,
and pass to first riscv_assign_stack_location call.

Automatic date update in version.in

RISC-V: Improve linker error for FP mismatch.

bfd/
* elfnn-riscv.c (riscv_float_abi_string): New.
(_bfd_riscv_elf_merge_private_bfd_data): Use it for error message.

opcodes/nfp: Fix disassembly of crc[] with swapped operands.

The decoding of the CRC operation in alu instructions was using bits
from the instruction word directly, instead of srcA which would be
different if the swap bit was set.

Signed-off-by: Francois H. Theron <francois.theron@netronome.com>

[ARM] Improve indentation of ARM architecture declarations

This commit cleans up indentation of ARM architecture declaration,
namely entries of arm_archs and definition of macros ARM_EXT_*,
ARM_AEXT_*, ARM_AEXT2_*, FPU_EXT_*, FPU_ARCH_* and ARM_ARCH_*. It also
gets rid of unused ARM_ARCH_V6M-ONLY and merge AEM_AEXT_V6M_ONLY in
ARM_AEXT_V6M now sole user.

gas/
2018-11-13 Thomas Preud'homme <thomas.preudhomme@arm.com>

* config/tc-arm.c (arm_archs): Reindent.

include/
2018-11-13 Thomas Preud'homme <thomas.preudhomme@arm.com>

* opcode/arm.h (ARM_AEXT_V6M_ONLY): Merge into its use in ARM_AEXT_V6M.
(ARM_ARCH_V6M_ONLY): Remove.
(ARM_EXT_V1, ARM_EXT_V2, ARM_EXT_V2S, ARM_EXT_V3, ARM_EXT_V3M,
ARM_EXT_V4, ARM_EXT_V4T, ARM_EXT_V5, ARM_EXT_V5T, ARM_EXT_V5ExP,
ARM_EXT_V5E, ARM_EXT_V5J, ARM_EXT_V6, ARM_EXT_V6K, ARM_EXT_V8,
ARM_EXT_V6T2, ARM_EXT_DIV, ARM_EXT_V5E_NOTM, ARM_EXT_V6_NOTM,
ARM_EXT_V7, ARM_EXT_V7A, ARM_EXT_V7R, ARM_EXT_V7M, ARM_EXT_V6M,
ARM_EXT_BARRIER, ARM_EXT_THUMB_MSR, ARM_EXT_V6_DSP, ARM_EXT_MP,
ARM_EXT_SEC, ARM_EXT_OS, ARM_EXT_ADIV, ARM_EXT_VIRT, ARM_EXT2_PAN,
ARM_EXT2_V8_2A, ARM_EXT2_V8M, ARM_EXT2_ATOMICS, ARM_EXT2_V6T2_V8M,
ARM_EXT2_FP16_INST, ARM_EXT2_V8M_MAIN, ARM_EXT2_RAS, ARM_EXT2_V8_3A,
ARM_EXT2_V8A, ARM_EXT2_V8_4A, ARM_EXT2_FP16_FML, ARM_EXT2_V8_5A,
ARM_EXT2_SB, ARM_EXT2_PREDRES, ARM_CEXT_XSCALE, ARM_CEXT_MAVERICK,
ARM_CEXT_IWMMXT, ARM_CEXT_IWMMXT2, FPU_ENDIAN_PURE, FPU_ENDIAN_BIG,
FPU_FPA_EXT_V1, FPU_FPA_EXT_V2, FPU_MAVERICK, FPU_VFP_EXT_V1xD,
FPU_VFP_EXT_V1, FPU_VFP_EXT_V2, FPU_VFP_EXT_V3xD, FPU_VFP_EXT_V3,
FPU_NEON_EXT_V1, FPU_VFP_EXT_D32, FPU_VFP_EXT_FP16, FPU_NEON_EXT_FMA,
FPU_VFP_EXT_FMA, FPU_VFP_EXT_ARMV8, FPU_NEON_EXT_ARMV8,
FPU_CRYPTO_EXT_ARMV8, CRC_EXT_ARMV8, FPU_VFP_EXT_ARMV8xD,
FPU_NEON_EXT_RDMA, FPU_NEON_EXT_DOTPROD, ARM_AEXT_V1, ARM_AEXT_V2,
ARM_AEXT_V2S, ARM_AEXT_V3, ARM_AEXT_V3M, ARM_AEXT_V4xM, ARM_AEXT_V4,
ARM_AEXT_V4TxM, ARM_AEXT_V4T, ARM_AEXT_V5xM, ARM_AEXT_V5,
ARM_AEXT_V5TxM, ARM_AEXT_V5T, ARM_AEXT_V5TExP, ARM_AEXT_V5TE,
ARM_AEXT_V5TEJ, ARM_AEXT_V6, ARM_AEXT_V6K, ARM_AEXT_V6Z, ARM_AEXT_V6KZ,
ARM_AEXT_V6T2, ARM_AEXT_V6KT2, ARM_AEXT_V6ZT2, ARM_AEXT_V6KZT2,
ARM_AEXT_V7_ARM, ARM_AEXT_V7A, ARM_AEXT_V7VE, ARM_AEXT_V7R,
ARM_AEXT_NOTM, ARM_AEXT_V6M_ONLY, ARM_AEXT_V6M, ARM_AEXT_V6SM,
ARM_AEXT_V7M, ARM_AEXT_V7, ARM_AEXT_V7EM, ARM_AEXT_V8A, ARM_AEXT2_V8A,
ARM_AEXT2_V8_1A, ARM_AEXT2_V8_2A, ARM_AEXT2_V8_3A, ARM_AEXT2_V8_4A,
ARM_AEXT2_V8_5A, ARM_AEXT_V8M_BASE, ARM_AEXT_V8M_MAIN,
ARM_AEXT_V8M_MAIN_DSP, ARM_AEXT2_V8M, ARM_AEXT2_V8M_BASE,
ARM_AEXT2_V8M_MAIN, ARM_AEXT2_V8M_MAIN_DSP, ARM_AEXT_V8R,
ARM_AEXT2_V8R, FPU_VFP_V1xD, FPU_VFP_V1, FPU_VFP_V2, FPU_VFP_V3D16,
FPU_VFP_V3, FPU_VFP_V3xD, FPU_VFP_V4D16, FPU_VFP_V4, FPU_VFP_V4_SP_D16,
FPU_VFP_V5D16, FPU_VFP_ARMV8, FPU_NEON_ARMV8, FPU_CRYPTO_ARMV8,
FPU_VFP_HARD, FPU_FPA, FPU_ARCH_VFP, FPU_ARCH_FPE, FPU_ARCH_FPA,
FPU_ARCH_VFP_V1xD, FPU_ARCH_VFP_V1, FPU_ARCH_VFP_V2,
FPU_ARCH_VFP_V3D16_FP16, FPU_ARCH_VFP_V3, FPU_ARCH_VFP_V3_FP16,
FPU_ARCH_VFP_V3xD_FP16, FPU_ARCH_NEON_V1, FPU_ARCH_VFP_V3_PLUS_NEON_V1,
FPU_ARCH_NEON_FP16, FPU_ARCH_VFP_HARD, FPU_ARCH_VFP_V4,
FPU_ARCH_VFP_V4D16, FPU_ARCH_VFP_V4_SP_D16, FPU_ARCH_VFP_V5D16,
FPU_ARCH_VFP_V5_SP_D16, FPU_ARCH_NEON_VFP_V4, FPU_ARCH_VFP_ARMV8,
FPU_ARCH_NEON_VFP_ARMV8, FPU_ARCH_CRYPTO_NEON_VFP_ARMV8,
FPU_ARCH_CRYPTO_NEON_VFP_ARMV8_DOTPROD, ARCH_CRC_ARMV8,
FPU_ARCH_NEON_VFP_ARMV8_1, FPU_ARCH_CRYPTO_NEON_VFP_ARMV8_1,
FPU_ARCH_DOTPROD_NEON_VFP_ARMV8, ARM_ARCH_V1, ARM_ARCH_V2,
ARM_ARCH_V2S, ARM_ARCH_V3, ARM_ARCH_V3M, ARM_ARCH_V4xM, ARM_ARCH_V4,
ARM_ARCH_V4TxM, ARM_ARCH_V4T, ARM_ARCH_V5xM, ARM_ARCH_V5,
ARM_ARCH_V5TxM, ARM_ARCH_V5T, ARM_ARCH_V5TExP, ARM_ARCH_V5TE,
ARM_ARCH_V5TEJ, ARM_ARCH_V6, ARM_ARCH_V6K, ARM_ARCH_V6Z, ARM_ARCH_V6KZ,
ARM_ARCH_V6T2, ARM_ARCH_V6KT2, ARM_ARCH_V6ZT2, ARM_ARCH_V6KZT2,
ARM_ARCH_V6M, ARM_ARCH_V6SM, ARM_ARCH_V7, ARM_ARCH_V7A, ARM_ARCH_V7VE,
ARM_ARCH_V7R, ARM_ARCH_V7M, ARM_ARCH_V7EM, ARM_ARCH_V8A,
ARM_ARCH_V8A_CRC, ARM_ARCH_V8_1A, ARM_ARCH_V8_2A, ARM_ARCH_V8_3A,
ARM_ARCH_V8_4A, ARM_ARCH_V8_5A, ARM_ARCH_V8M_BASE, ARM_ARCH_V8M_MAIN,
ARM_ARCH_V8M_MAIN_DSP, ARM_ARCH_V8R): Reindent.

Automatic date update in version.in

i386: Accept both .plt.got and .plt.sec sections

Glibc commit:

commit a15529fda8d132621328c3fe32997a3d9c55aef4
Author: H.J. Lu <hjl.tools@gmail.com>
Date:   Mon May 14 09:23:55 2018 -0700

    i386: Replace PREINIT_FUNCTION@PLT with *%eax in call

    Since we have loaded address of PREINIT_FUNCTION into %eax, we can
    avoid extra branch to PLT slot.

changed __gmon_start__ relocations in crt1.o from

00000015  0000092b R_386_GOT32X           00000000   __gmon_start__
0000001e  00000904 R_386_PLT32            00000000   __gmon_start__

to

00000015  00000a2b R_386_GOT32X           00000000   __gmon_start__

As the result, .plt.sec section may be generated instead of .plt.got
section, depending on __gmon_start__ relocations.

* testsuite/ld-i386/plt-main-ibt.dd: Accept both .plt.got and
.plt.sec sections.

Add completer for skip numbers

Add completer to various commands that accept skip numbers:

  - skip enable
  - skip disable
  - skip delete
  - info skip

These commands also accept ranges, the completer works for that but is
not very smart.  It will suggest invalid ranges, for example when doing
"2-<TAB>" it will suggest "1", which would not result in a valid range.
Also, it will keep suggesting when doing "1-2-<TAB>", even though it's
an invalid syntax.

A future idea would be to make a re-usable and well-tested completer for
numbers and ranges.  I think it could at least be re-used for breakpoint
and thread numbers (for example with the "enable breakpoints" command).

gdb/ChangeLog:

* skip.c (complete_skip_number): New function.
(_initialize_step_skip): Add completers to some skip commands.

gdb/testsuite/ChangeLog:

* gdb.base/skip.exp: Add standard_testfile.  Add "skip delete"
completer tests.

Update documentation describing how the linker chooses a start address.

PR 10865
* ld.texi (Entry Point): Make it clear that the text refers to
PE-based systems rather than just a PE system.

[BINUTILS, AARCH64, 8/8] Add data cache instructions for Memory Tagging Extension

This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.

This patch adds all the data cache instructions that are part of this
extension:
- DC IGVAC, Xt
- DC IGSW, Xt
- DC CGSW, Xt
- DC CIGSW, Xt
- DC CGVAC, Xt
- DC CGVAP, Xt
- DC CGVADP, Xt
- DC CIGVAC, Xt
- DC GVA, Xt
- DC IGDVAC, Xt
- DC IGDSW, Xt
- DC CGDSW, Xt
- DC CIGDSW, Xt
- DC CGDVAC, Xt
- DC CGDVAP, Xt
- DC CGDVADP, Xt
- DC CIGDVAC, Xt
- DC GZVA, Xt

*** opcodes/ChangeLog ***

2018-11-12 Sudakshina Das <sudi.das@arm.com>

* aarch64-opc.c (aarch64_sys_regs_dc): New entries for
IGVAC, IGSW, CGSW, CIGSW, CGVAC, CGVAP, CGVADP, CIGVAC, GVA,
IGDVAC, IGDSW, CGDSW, CIGDSW, CGDVAC, CGDVAP, CGDVADP,
CIGDVAC and GZVA.
(aarch64_sys_ins_reg_supported_p): New check for above.

*** gas/ChangeLog ***

2018-11-12 Sudakshina Das <sudi.das@arm.com>

* testsuite/gas/aarch64/sysreg-4.s: Test IGVAC, IGSW,
CGSW, CIGSW, CGVAC, CGVAP, CGVADP, CIGVAC, GVA,
IGDVAC, IGDSW, CGDSW, CIGDSW, CGDVAC, CGDVAP, CGDVADP,
CIGDVAC and GZVA with DC.
* testsuite/gas/aarch64/sysreg-4.d: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise.

[BINUTILS, AARCH64, 7/8] Add system registers for Memory Tagging Extension

This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.

This patch adds all the system registers that are part of this
extension and are accessible via the MRS/MSR instructions:
- TCO
- TFSRE0_SL1
- TFSR_EL1
- TFSR_EL2
- TFSR_EL3
- TFSR_EL12
- RGSR_EL1
- GCR_EL1
TCO is also accessible with the MSR(immediate) instruction.

*** opcodes/ChangeLog ***

2018-11-12 Sudakshina Das <sudi.das@arm.com>

* aarch64-opc.c (aarch64_sys_regs): New entries for TCO,
TFSRE0_SL1, TFSR_EL1, TFSR_EL2, TFSR_EL3, TFSR_EL12,
RGSR_EL1 and GCR_EL1.
(aarch64_sys_reg_supported_p): New check for above.
(aarch64_pstatefields): New entry for TCO.
(aarch64_pstatefield_supported_p): New check for above.

*** gas/ChangeLog ***

2018-11-12 Sudakshina Das <sudi.das@arm.com>

* testsuite/gas/aarch64/sysreg-4.s: Test TCO, TFSRE0_SL1,
TFSR_EL1, TFSR_EL2, TFSR_EL3, TFSR_EL12, RGSR_EL1 and
GCR_EL1 MSR and MRS.
* testsuite/gas/aarch64/sysreg-4.d: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise.

[BINUTILS, AARCH64, 6/8] Add Tag getting instruction in Memory Tagging Extension

This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.

This patch add support to the Bulk Allocation Tag instructions from
MTE. These are the following instructions added in this patch:
- LDGV <Xt>, [<Xn|SP>]!
- STGV <Xt>, [<Xn|SP>]!

This needed a new kind of operand for the new addressing [<Xn|SP>]!
since this has no offset and only takes a pre-indexed version.
Hence AARCH64_OPND_ADDR_SIMPLE_2 and ldtdgv_indexed are introduced.
(AARCH64_OPND_ADDR_SIMPLE fulfilled the no offset criteria but does
not allow writeback). We also needed new encoding and decoding
functions to be able to do the same.

where
<Xt> : Is the 64-bit destination GPR.
<Xn|SP> : Is the 64-bit first source GPR or Stack pointer.

*** include/ChangeLog ***

2018-11-12  Sudakshina Das  <sudi.das@arm.com>

* opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_ADDR_SIMPLE_2.
(aarch64_insn_class): Add ldstgv_indexed.

*** opcodes/ChangeLog ***

2018-11-12  Sudakshina Das  <sudi.das@arm.com>

* aarch64-asm.c (aarch64_ins_addr_simple_2): New.
* aarch64-asm.h (ins_addr_simple_2): Declare the above.
* aarch64-dis.c (aarch64_ext_addr_simple_2): New.
* aarch64-dis.h (ext_addr_simple_2): Declare the above.
* aarch64-opc.c (operand_general_constraint_met_p): Add case for
AARCH64_OPND_ADDR_SIMPLE_2 and ldstgv_indexed.
(aarch64_print_operand): Add case for AARCH64_OPND_ADDR_SIMPLE_2.
* aarch64-tbl.h (aarch64_opcode_table): Add stgv and ldgv.
(AARCH64_OPERANDS): Define ADDR_SIMPLE_2.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.

*** gas/ChangeLog ***

2018-11-12  Sudakshina Das  <sudi.das@arm.com>

* config/tc-aarch64.c (parse_operands): Add switch case for
AARCH64_OPND_ADDR_SIMPLE_2 and allow [base]! for it.
(warn_unpredictable_ldst): Exempt ldstgv_indexed for ldgv.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for ldgv and stgv.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.

[BINUTILS, AARCH64, 5/8] Add Tag getting instruction in Memory Tagging Extension

This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.

This patch add support to the Tag Getting instruction from Memory Tagging
Extension.
- LDG <Xt>, [<Xn|SP>, #<simm>]

where
<Xt> : Is the 64-bit destination GPR.
<Xn|SP> : Is the 64-bit first source GPR or Stack pointer.
<simm> : Is the optional signed immediate offset, a multiple of 16
in the range of -4096 and 4080, defaulting to 0.

*** opcodes/ChangeLog ***

2018-11-12 Sudakshina Das <sudi.das@arm.com>

* aarch64-tbl.h (QL_LDG): New.
(aarch64_opcode_table): Add ldg.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.

*** gas/ChangeLog ***

2018-11-12 Sudakshina Das <sudi.das@arm.com>

* testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for ldg.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.

[BINUTILS, AARCH64, 4/8] Add Tag setting instructions in Memory Tagging Extension

This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.

This patch add support to the Tag setting instructions from
MTE which consists of the following instructions:
- STG [<Xn|SP>, #<simm>]
- STG [<Xn|SP>, #<simm>]!
- STG [<Xn|SP>], #<simm>
- STZG [<Xn|SP>, #<simm>]
- STZG [<Xn|SP>, #<simm>]!
- STZG [<Xn|SP>], #<simm>
- ST2G [<Xn|SP>, #<simm>]
- ST2G [<Xn|SP>, #<simm>]!
- ST2G [<Xn|SP>], #<simm>
- STZ2G [<Xn|SP>, #<simm>]
- STZ2G [<Xn|SP>, #<simm>]!
- STZ2G [<Xn|SP>], #<simm>
- STGP <Xt>, <Xt2>, [<Xn|SP>, #<imm>]
- STGP <Xt>, <Xt2>, [<Xn|SP>, #<imm>]!
- STGP <Xt>, <Xt2>, [<Xn|SP>], #<imm>

where
<Xn|SP> : Is the 64-bit GPR or Stack pointer.
<simm> : Is the optional signed immediate offset, a multiple of 16
in the range -4096 to 4080, defaulting to 0.

*** include/ChangeLog ***

2018-11-12  Sudakshina Das  <sudi.das@arm.com>

* opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_ADDR_SIMM11
and AARCH64_OPND_ADDR_SIMM13.
(aarch64_opnd_qualifier): Add new AARCH64_OPND_QLF_imm_tag.

*** opcodes/ChangeLog ***

2018-11-12  Sudakshina Das  <sudi.das@arm.com>

* aarch64-opc.c (aarch64_opnd_qualifiers): Add new data
for AARCH64_OPND_QLF_imm_tag.
(operand_general_constraint_met_p): Add case for
AARCH64_OPND_ADDR_SIMM11 and AARCH64_OPND_ADDR_SIMM13.
(aarch64_print_operand): Likewise.
* aarch64-tbl.h (QL_LDST_AT, QL_STGP): New.
(aarch64_opcode_table): Add stg, stzg, st2g, stz2g and stgp
for both offset and pre/post indexed versions.
(AARCH64_OPERANDS): Define ADDR_SIMM11 and ADDR_SIMM13.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.

*** gas/ChangeLog ***

2018-11-12  Sudakshina Das  <sudi.das@arm.com>

* config/tc-aarch64.c (parse_operands): Add switch case for
AARCH64_OPND_ADDR_SIMM11 and AARCH64_OPND_ADDR_SIMM13.
(fix_insn): Likewise.
(warn_unpredictable_ldst): Exempt STGP.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for stg, st2g,
stzg, stz2g and stgp.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.

[BINUTILS, AARCH64, 3/8] Add Pointer Arithmetic instructions in Memory Tagging Extension

This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.

This patch add support to the Pointer Arithmetic instructions from
MTE. These are the following instructions added in this patch:
- SUBP <Xd>, <Xn|SP>, <Xm|SP>
- SUBPS <Xd>, <Xn|SP>, <Xm|SP>
- CMPP <Xn|SP>, <Xm|SP>
where CMPP is an alias to SUBPS XZR, <Xn|SP>, <Xm|SP>

where
<Xd> : Is the 64-bit destination GPR.
<Xn|SP> : Is the 64-bit first source GPR or Stack pointer.
<Xm|SP> : Is the 64-bit second source GPR or Stack pointer.

*** opcodes/ChangeLog ***

2018-11-12 Sudakshina Das <sudi.das@arm.com>

* aarch64-tbl.h (aarch64_opcode_table): Add subp, subps and cmpp.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.

*** gas/ChangeLog ***

2018-11-12 Sudakshina Das <sudi.das@arm.com>

* testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for subp,
subps and cmpp.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.

[BINUTILS, AARCH64, 2/8] Add Tag generation instructions in Memory Tagging Extension

This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.

This patch add support to the Tag generation instructions from
MTE. These are the following instructions added in this patch:
- IRG <Xd|SP>, <Xn|SP>{, Xm}
- ADDG <Xd|SP>, <Xn|SP>, #<uimm1>. #<uimm2>
- SUBG <Xd|SP>, <Xn|SP>, #<uimm1>. #<uimm2>
- GMI <Xd>, <Xn|SP>, <Xm>

where
<Xd|SP> : Is the 64-bit destination GPR or Stack pointer.
<Xn|SP> : Is the 64-bit source GPR or Stack pointer.
<uimm6> : Is the unsigned immediate, a multiple of 16
in the range 0 to 1008.
<uimm4> : Is the unsigned immediate, in the range 0 to 15.

*** include/ChangeLog ***

2018-11-12  Sudakshina Das  <sudi.das@arm.com>

* opcode/aarch64.h (aarch64_opnd): Add
AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10 as new enums.

*** opcodes/ChangeLog ***

2018-11-12  Sudakshina Das  <sudi.das@arm.com>

* aarch64-opc.h (aarch64_field_kind): New FLD_imm4_3.
(OPD_F_SHIFT_BY_4, operand_need_shift_by_four): New.
* aarch64-opc.c (fields): Add entry for imm4_3.
(operand_general_constraint_met_p): Add cases for
AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10.
(aarch64_print_operand): Likewise.
* aarch64-tbl.h (QL_ADDG): New.
(aarch64_opcode_table): Add addg, subg, irg and gmi.
(AARCH64_OPERANDS): Define UIMM4_ADDG and UIMM10.
* aarch64-asm.c (aarch64_ins_imm): Add case for
operand_need_shift_by_four.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.

*** gas/ChangeLog ***

2018-11-12  Sudakshina Das  <sudi.das@arm.com>

* config/tc-aarch64.c (parse_operands): Add switch case for
AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: New.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.d: Likewise.

[BINUTILS, AARCH64, 1/8] Add support for Memory Tagging Extension for ARMv8.5-A

This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions. Memory Tagging Extension is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch adds the new command line option and the new feature macros.

*** include/ChangeLog ***

2018-11-12  Sudakshina Das  <sudi.das@arm.com>

* opcode/aarch64.h (AARCH64_FEATURE_MEMTAG): New.

*** opcodes/ChangeLog ***

2018-11-12  Sudakshina Das  <sudi.das@arm.com>

* aarch64-tbl.h (aarch64_feature_memtag): New.
(MEMTAG, MEMTAG_INSN): New.

*** gas/ChangeLog ***

2018-11-12  Sudakshina Das  <sudi.das@arm.com>

* config/tc-aarch64.c (aarch64_features): Add "memtag"
as a new option.
* doc/c-aarch64.texi: Document the same.

Updated Spanish translation for the ld subdirectory.

ld * po/es.po: Updated Spanish translation.

Automatic date update in version.in

Remove a VEC from remote.c

This removes the VEC from remote_g_packet_data, replacing it with a
std::vector.  This is a bit odd in that this object is never
destroyed, and is obstack-allocated.  I believe a gdbarch is never
destroyed, so this seemed ok.

Tested by the buildbot.

gdb/ChangeLog
2018-11-09  Tom Tromey  <tom@tromey.com>

* remote.c (remote_g_packet_guess_s): Remove typedef and DEF_VEC.
(struct remote_g_packet_data): Derive from allocate_on_obstack.
<guesses>: Now a std::vector.
(remote_g_packet_data_init, register_remote_g_packet_guess):
Update.
(remote_read_description_p): Update.  Return bool.
(remote_target::read_description): Update.
(struct remote_g_packet_guess): Add constructor.

Return scoped_fd from open_source_file and find_and_open_source

This changes open_source_file and find_and_open_source to return
scoped_fd, then updates the callers as appropriate, including using
scoped_fd::to_file.

Tested by the buildbot.

gdb/ChangeLog
2018-11-09  Tom Tromey  <tom@tromey.com>

* common/scoped_fd.h (class scoped_fd): Add move constructor and
move assignment operator.
* psymtab.c (psymtab_to_fullname): Update.
* source.h (open_source_file): Return scoped_fd.
(find_and_open_source): Likewise.
* source.c (open_source_file): Return scoped_fd.
(get_filename_and_charpos): Update.
(print_source_lines_base): Update.  Use scoped_fd::to_file.
(forward_search_command): Likewise.
(reverse_search_command): Likewise.
(find_and_open_source): Return scoped_fd.
* tui/tui-source.c (tui_set_source_content): Update.  Use
gdb_file_up.

Fix unsigned overflow in minsyms reader.

Use a ssize_t helper variable for the number of bytes to shrink the
msymbols obstack rather than relying on unsigned overflow to shrink
the size of the obstack.

gdb/ChangeLog:

* minsyms.c (minimal_symbol_reader::install): Fix unsigned
overflow.

[PowerPC] Document requirements for VSX feature

As suggested in
https://sourceware.org/ml/gdb-patches/2018-10/msg00510.html, this
patch changes the documentation for the VSX tdesc feature to make it
clear that the altivec and FPU features are requirements.

gdb/doc/ChangeLog:
2018-11-09 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>

* gdb.texinfo (PowerPC Features): Document the altivec and fpu
requirements for the org.gnu.gdb.power.vsx feature.

Fix a typo in iconv.m4.

config/
2018-11-09  Hafiz Abid Qadeer  <abidh@codesourcery.com>

* iconv.m4 (AM_ICONV_LINK): Don't overwrite CPPFLAGS.
Append $INCICONV to it.

gdb/
2018-11-09  Hafiz Abid Qadeer  <abidh@codesourcery.com>

* configure: Regenerate.

binutils/
2018-11-09  Hafiz Abid Qadeer  <abidh@codesourcery.com>

* configure: Regenerate.

intl/
2018-11-09  Hafiz Abid Qadeer  <abidh@codesourcery.com>

* configure: Regenerate.

Correct comment concerning PE timestamp insertion.

* peXXigen.c (_bfd_XXi_only_swap_filehdr_out): Correct comment
concerning timestamp insertion.

Fixed warning from previous patch. Added Changelog.

[ARC] More fixes for TLS.

Added warning for static TLS reloc.

Fixed issue related to TLS and partial static linking of libraries:
  This issue was detected when throwing exceptions in C++ while linking with
  -static-libstdc++.
  TLS relocation from the libstdc++ wasn't being patched as local now that it was
  static linked with the executable.

Fix for TLS with static and pie. Problem introduced by earlier patch:
  Fixes the following glibc tests:
   - elf/tst-tls1-static

bfd/
    xxxx-xx-xx  Cupertino Miranda  <cmiranda@synopsys.com>

    * arc-got.h (arc_got_entry_type_for_reloc): Changed to
      correct static TLS relocs.
            * elf32-arc.c (elf_arc_check_relocs): Introduced warning to
      TLS relocs which require -fPIC.
      (arc_create_forced_local_got_entries_for_tls): Created.
      Traverses list of GOT entries to be resolved statically
      when needed.
      (elf_arc_finish_dynamic_sections): Changed. Calls
      arc_create_forced_local_got_entries_for_tls for each known
      possibly GOT symbol.

Updated French translation for the ld subdirectory.

* po/fr.po: Updated French translation.

Stop corruption of ihex output shen addresses are sign extended.

PR 23699
* ihex.c (ihex_write_object_contents): Check for sign extended
addresses that cannot be supported in the ihex format.

oops - add missing piece of previous delta

Enhance the strings program so that it can display multibyte strings.

* strings.c (print_strings): Check for multibyte encodings.
* binutils-all/strings-1.bin: New file. Test binary for string decoding.
* testsuite/binutils-all/strings.exp: New file. Test the strings program.
* testsuite/config/default.exp (STRINGS): Define if not provided
by the environment.
(STRINGSFLAGS): Likewise.

[ARC] Update ld tests.

ld/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>

* testsuite/ld-arc/tls_gd-01.d: Update test.
* testsuite/ld-arc/arclinux-nps.d: Add cpu option.

[ARC] Fix local got entry list.

Fix a memory leak appearing when the local got entry list was constructed.

bfd/
xxxx-xx-xx Claudiu Zissulescu <claziss@synopsys.com>

* arc-got.h (arc_get_local_got_ents): Revamp it; use
elf_local_got_ents to store the local got list.
(get_got_entry_list_for_symbo): Restructure it.
* elf32-arc.c (elf_arc_relocate_section): Correct the call to
get_got_entry_list_for_symbol.

Allow for compilers that do not produce aligned .rdat sections in PE format files.

PR 23872
* scripttempl/pep.sc (pe.sc): Ensure rdata_runtime_pseudo_relocs
are aligned.
* scripttempl/pep.sc (pep.sc): Likewise.

[gdb/symtab] Fix language of duplicate static minimal symbol

Consider a test-case with source files msym.c:
...
static int foo (void) { return 1; }
...
and msym_main.c:
...
static int foo (void) { return 2; }
int main (void) { return 0; }
..
compiled as c++ with minimal symbols:
...
$ g++ msym_main.c msym.c
...

With objdump -x we find the two foo symbols prefixed with their corresponding
files in the symbol table:
...
0000000000000000 l    df *ABS*  0000000000000000              msym_main.c
00000000004004c7 l     F .text  000000000000000b              _ZL3foov
0000000000000000 l    df *ABS*  0000000000000000              msym.c
00000000004004dd l     F .text  000000000000000b              _ZL3foov
...

However, when we use gdb to print info on foo, both foos are listed, but we
get one symbol mangled and one symbol demangled:
...
$ gdb ./a.out -batch -ex "info func foo"
All functions matching regular expression "foo":

Non-debugging symbols:
0x00000000004004c7  foo()
0x00000000004004dd  _ZL3foov
...

During minimal symbol reading symbol_set_names is called for each symbol.

First, it's called with foo from msym.c, an entry is created in
per_bfd->demangled_names_hash and symbol_find_demangled_name is called, which
has the side effect of setting the language of the symbol to language_cplus.

Then, it's called with foo from msym_main.c.  Since
per_bfd->demangled_names_hash already has an entry for that name,
symbol_find_demangled_name is not called, and the language of the symbol
remains language_auto.

Fix this by doing the symbol_find_demangled_name call unconditionally.

Build and reg-tested on x86_64-linux.

gdb/ChangeLog:

2018-11-09  Tom de Vries  <tdevries@suse.de>

* symtab.c (symbol_set_names): Call symbol_find_demangled_name
unconditionally, to set the language of the symbol.  Manage freeing
returned pointer using gdb::unique_xmalloc_ptr.

gdb/testsuite/ChangeLog:

2018-11-09  Tom de Vries  <tdevries@suse.de>

* gdb.base/msym-lang.c: New test.
* gdb.base/msym-lang.exp: New file.
* gdb.base/msym-lang-main.c: New test.

S/390: Fix optional operand handling after memory addresses

Instructions having an optional argument following a memory address
operand were not handled correctly if the optional argument was not
specified.

gas/ChangeLog:

2018-11-09 Andreas Krebbel <krebbel@linux.ibm.com>

* config/tc-s390.c (skip_optargs_p): New function.
(md_gather_operands): Use skip_optargs_p.
* testsuite/gas/s390/s390.exp: Run the new test.
* testsuite/gas/s390/zarch-optargs.d: New test.
* testsuite/gas/s390/zarch-optargs.s: New test.

PowerPC, don't use bfd reloc howto in md_assemble

We support source like the following
.data
.quad x-.
.space 8
x:
where at the time the .quad line is assembled, x is unknown so a fixup
is emitted for later evaluation. This is supported for data even when
the target may not have relocations for the expression, for example,
32-bit powerpc targets lack a 64-bit reloc. As long as the fixup
resolves at assembly time, gas is happy.

The idea of this patch is to support fixups that resolve at assembly
time for instructions too, even when the target might lack the
necessary relocations (and thus no howto).

* config/tc-ppc.c (fixup_size): New function.
(md_assemble): Use it to derive size and pcrel directly
from fixup reloc type.

Automatic date update in version.in

Capitalize "<TAB>" in require_record_target error

This changes require_record_target to say "<TAB>" rather than "<tab>".
I think capitalizing here is a bit more GNU-ish, based on Emacs usage
and one other case in gdb.

gdb/ChangeLog
2018-11-08 Tom Tromey <tom@tromey.com>

* record.c (require_record_target): Upper-case "<TAB>".

Fix output indentation for "info pretty-printers"

I noticed that "info pretty-printers" will indent the "objfile" line
like:

    (top-gdb) info pretty-printer
    global pretty-printers:
      builtin
mpx_bound128
      objfile /home/tromey/gdb/build/gdb/gdb pretty-printers:
      type_lookup_function

I think the "objfile" line should be "out-dented", following the same
style as the "global" and "progspace" (not shown) lines.

This patch implements this.

gdb/ChangeLog
2018-11-08  Tom Tromey  <tom@tromey.com>

* python/lib/gdb/command/pretty_printers.py
(InfoPrettyPrinter.invoke): Don't indent "objfile" heading.

Avoid crash when calling warning too early

I noticed that if you pass the name of an existing file (not a
directory) as the argument to --data-directory, gdb will crash:

    $ ./gdb -nx  --data-directory  ./gdb
    ../../binutils-gdb/gdb/target.c:590:56: runtime error: member call on null pointer of type 'struct target_ops'

This was later reported as PR gdb/23838.

This happens because warning ends up calling
target_supports_terminal_ours, which calls current_top_target, which
returns nullptr this early.

This fixes the problem by handling this case specially in
target_supports_terminal_ours.  I also changed
target_supports_terminal_ours to return bool.

gdb/ChangeLog
2018-11-08  Tom Tromey  <tom@tromey.com>

PR gdb/23555:
PR gdb/23838:
* target.h (target_supports_terminal_ours): Return bool.
* target.c (target_supports_terminal_ours): Handle case where
current_top_target returns nullptr.  Return bool.

gdb/testsuite/ChangeLog
2018-11-08  Tom Tromey  <tom@tromey.com>

PR gdb/23555:
PR gdb/23838:
* gdb.base/warning.exp: New file.

(AArch64) wrong value returned by "finish" for HFA

Consider the gdb.ada/array_return.exp testcase, and in particular,
consider the following code...

   type Small_Float_Vector is array (1 .. 2) of Float;

   function Create_Small_Float_Vector return Small_Float_Vector is
   begin
      return (others => 4.25);
   end Create_Small_Float_Vector;

... which declares a type which is an array with 2 floats in it
(floats are 4 bytes on AArch64), trying to get GDB to print
the return value from that function does not work:

    (gdb) fin
    Run till exit from #0  pck.create_small_float_vector () at /[...]/pck.adb:15
    0x000000000000062c in p () at /[...]/p.adb:11
    11         Vector := Create_Small_Float_Vector;
    Value returned is $1 = (4.25, 0.0)
                                  ^^^
                                  |||

We expected the value shown to be:

    (gdb) fin
    Run till exit from #0  pck.create_small_float_vector () at /[...]/pck.adb:15
    0x000000000000062c in p () at /[...]/p.adb:11
    11         Vector := Create_Small_Float_Vector;
    Value returned is $1 = (4.25, 4.25)

Because the return type is an HFA, it is returned via the first two
SIMD registers. However, what happens is that the current implementation
fails to realize that this is an HFA, and therefore fetches the return
value from the wrong location. And the reason why it fails to realize
this is because it thinks that our array has 8 elements (HFAs have
a maximum of 4). Looking at aapcs_is_vfp_call_or_return_candidate_1,
where this is determined, we can easily see why (looks like a thinko):

        | case TYPE_CODE_ARRAY:
        | [...]
        |         struct type *target_type = TYPE_TARGET_TYPE (type);
        |         int count = aapcs_is_vfp_call_or_return_candidate_1
        |                       (target_type, fundamental_type);
        |
        |         if (count == -1)
        |           return count;
        |
  !! -> |         count *= TYPE_LENGTH (type);
        |           return count;

Here, we first determine the count for one element of our array,
and so we should then be multiplying that count by the number
of elements in our array (2 in our case). But instead, we multiply it
by the total size (8). As a result, we do not classify the return
type as an HFA, and thus pick the wrong location for fetching
the return value.

gdb/ChangeLog:

        * aarch64-tdep.c (aapcs_is_vfp_call_or_return_candidate_1):
        return the correct count for potential HFAs.

Tested on aarch64-linux, fixes:

    array_return.exp: value printed by finish of Create_Small_Float_Vector

x86-64: fix ZMM register state tracking

The three AVX512 state components are entirely independent - one being
in its "init state" has no implication whatsoever on either of the other
two. Fully separate X86_XSTATE_ZMM_H and X86_XSTATE_ZMM handling, to
prevent upper halves of the upper 16 ZMM registers to display as if they
were zero (when they aren't) after e.g. VZEROALL/VZEROUPPER.

gdb/riscv: Update test to support targets without FP hardware

Update gdb.arch/riscv-reg-aliases.exp test to support targets without
floating point registers.

gdb/testsuite/ChangeLog:

* gdb.arch/riscv-reg-aliases.exp: Handle targets without floating
point hardware.

gdb/riscv: Handle errors while setting the frame id

When we connect to a remote target one of the first things GDB does is
establish a frame id.  If an error is thrown while building this frame
id then GDB will disconnect from the target.

This can mean that, if the user is attempting to connect to a target
that doesn't yet have a program loaded, or the program the user is
going to load onto the target doesn't match what is already loaded, or
the target is just in some undefined state, then the very first
request for a frame id can fail (for example, by trying to load from
an invalid memory address), and GDB will disconnect.  It is then
impossible for the user to connect to the target and load a new
program at all.

An example of such a session might look like this:

    Reading symbols from ./gdb/testsuite/outputs/gdb.arch/riscv-reg-aliases/riscv-reg-aliases...
    (gdb) target remote :37191
    Remote debugging using :37191
    0x0000000000000100 in ?? ()
    Cannot access memory at address 0x0
    (gdb) load
    You can't do that when your target is `exec'
    (gdb) info frame
    /path/to/gdb/gdb/thread.c:93: internal-error: thread_info* inferior_thread(): Assertion `tp' failed.
    A problem internal to GDB has been detected,
    further debugging may prove unreliable.
    Quit this debugging session? (y or n)

The solution is to handle errors in riscv_frame_this_id, and leave the
this_id variable with its default value, which is the predefined
'outermost' frame.

With this fix in place, connecting to the same target now looks like
this:

    (gdb) target remote :37191
    Remote debugging using :37191
    0x0000000000000100 in ?? ()
    (gdb) info frame
    Stack level 0, frame at 0x0:
     pc = 0x100; saved pc = <not saved>
     Outermost frame: outermost
     Arglist at unknown address.
     Locals at unknown address, Previous frame's sp in sp

gdb/ChangeLog:

* riscv-tdep.c (riscv_insn::decode): Update header comment.
(riscv_frame_this_id): Catch errors thrown while building the
frame cache, leave the frame id as the default, which is the outer
frame id.

Make gold testsuite work with CC and CXX specifying -B

The patch allows the gold testsuite to pass when using something like
the following configure line, which works for the rest of the binutils
testsuite.  At least, it does if you don't configure your gcc with any
of the options that force a particular path to as or ld.

gccdir="/home/alan/build/gcc/prev-"
gccsrc="/home/alan/src/gcc.git"
gcctarg="x86_64-linux"
CC="${gccdir}gcc/xgcc -B${gccdir}gcc/" \
CXX="${gccdir}gcc/xg++ -B${gccdir}gcc/ -I${gccdir}$gcctarg/libstdc++-v3/include -I${gccdir}$gcctarg/libstdc++-v3/include/$gcctarg -I${gccsrc}/libstdc++-v3/libsupc++ -L${gccdir}$gcctarg/libstdc++-v3/src/.libs/" \
~/src/binutils-gdb/configure ...

gold's -Bgcctestdir/ option must come before the -B supplied by $CC
or $CXX, in order to pick up the linker we want to test.  Also when
using a not-yet-installed gcc, it is necessary to provide a collect-ld
in gcctestdir/ as otherwise a collect-ld script in -B${gccdir}gcc/
will be used and the wrong linker tested.

Besides this, the patch fixes some bugs: The $COMPILE -D_FORTIFY_SOURCE
edit was wrong (but worked for usual values), and the $CXXLINK_S edit
unnecessarily but harmlessly used extra backslash quoting.  See
posix shell documentation regarding quoting, or
www.gnu.org/software/bash/manual/bashref.html#Command-Substitution

Also, -Bgcctestdir/ in one place makes it less likely a new test will
be added that accidentally lacks the option.

* Makefile.am (gcctestdir1/ld): Use $@ and absolute paths.
(gcctestdir1/collect-ld): New.
(ld1_DEPENDENCIES): Add gcctestdir1/collect-ld.
(ld1_LDFLAGS): Remove -Bgcctestdir1/.
(editcc1, ld1_LINK): Define.
(gcctestdir2/ld, gcctestdir2/collect-ld, ld2_DEPENDENCIES),
(ld2_LDFLAGS, editcc2, ld2_LINK),
(ld1_r_DEPENDENCIES, ld1_r_LDFLAGS, ld1_r_LINK),
(gcctestdir2-r/ld, gcctestdir2-r/collect-ld, ld2_r_DEPENDENCIES),
(ld2_r_LDFLAGS, editcc2r, ld2_r_LINK),
(gcctestdir3/ld, gcctestdir3/collect-ld, ld3_DEPENDENCIES),
(ld3_LDFLAGS, editcc3, ld3_LINK),
(gcctestdir4/ld, gcctestdir4/collect-ld, ld4_DEPENDENCIES),
(ld4_LDFLAGS, editcc4, ld4_LINK): Similarly.
* Makefile.in: Regenerate.
* testsuite/Makefile.am (editcc): Define sed command to put
our -B option first.  Remove other occurrences of -Bgcctestdir/
throughout file.
(editcc1): Define for -D_FORTIFY_SOURCE stripping.
(editcc2): Define for -static-libgcc/libstdc++ stripping.
(LINK1, CXXLINK1): Don't use CCLD or CXXLD.
(CCLD, CXXLD, COMPILE, LINK, CXXCOMPILE, CXXLINK, CXXLINK_S): Define
using editcc macros.
(gcctestdir/collect-ld): New rule, add as a dependency of..
(gcctestdir/ld): ..this.  Use $@ and abs_top_buildir.
(gcctestdir/as): Use $@.
* testsuite/Makefile.in: Regenerate.
* testsuite/incremental_test.sh (actual): Match collect-ld too.

Automatic date update in version.in

(Ada/tasking) fix array or string index out of range warning

A recent change in the compiler highlighted a small weakness in
the function reading the contents of the Ada Task Control Block
(ATCB -- the data that allows us to inspect Ada tasks). As a result,
anytime we read it, we started getting some warnings. For instance,
using the gdb.ada/tasks.exp testcase...

        $ gnatmake -g foo.adb
        $ gdb foo
        (gdb) b foo.adb:60
        Breakpoint 1 at 0x403e07: file foo.adb, line 60.
        (gdb) run
        [...]
        Thread 1 "foo" hit Breakpoint 1, foo () at foo.adb:60
        60         for J in Task_List'Range loop  -- STOP_HERE

... we can see that the "info tasks" command produces some warnings,
followed by the correct output.

        (gdb) info tasks
  !! ->  warning: array or string index out of range
  !! ->  warning: array or string index out of range
  !! ->  warning: array or string index out of range
  !! ->  warning: array or string index out of range
           ID       TID P-ID Pri State                  Name
        *   1    654050       48 Runnable               main_task
            2    654ef0    1  48 Accept or Select Term  task_list(1)
            3    658680    1  48 Accept or Select Term  task_list(2)
            4    65be10    1  48 Accept or Select Term  task_list(3)

The problem comes from the fact that read_atcb, the function responsible
for loading the contents of the ATCB, blindly tries to read some data
which is only relevant when a task is waiting for another task on
an entry call. A comment in that code's section gives a hint as to
how the information is meant to be decoded:

      /* Let My_ATCB be the Ada task control block of a task calling the
         entry of another task; then the Task_Id of the called task is
         in My_ATCB.Entry_Calls (My_ATCB.ATC_Nesting_Level).Called_Task.  */

What the comment shows is that, to get the Id of the task being called,
one has to go through the entry calls field, which is an array pointer.
Up to now, we were lucky that, for tasks that are _not_ waiting on an
entry call, its ATCB atc_nesting_level used to be set to 1, and so
we were able to silently read some irrelevant data. But a recent change
now causes this field to be zero instead, and this triggers the warning,
since we are now trying to read outside of the array's range (arrays
in Ada often start at index 1, as is the case here).

We avoid this issue by simply only reading that data when the data
is actually known to be relevant (state == Entry_Caller_Sleep).

This, in turn, allows us to simplify a bit the use of the task_info->state
field, where we no longer need to check task the task has a state equal
to Entry_Caller_Sleep before using this field. Indeed, with this new
approach, we now know that, unless task_info->state == Entry_Caller_Sleep,
the state is now guaranteed to be zero. In other words, we no longer set
task_info->called_task to some random value, forcing to check the task's
state first as a way to verify that the data is not random.

gdb/ChangeLog:

        * ada-lang.c (read_atcb): Only set task_info->called_task if
        task_info->state == Entry_Caller_Sleep.
        (print_ada_task_info): Do not check task_info->state before
        checking task_info->called_task.
        (info_task): Likewise.

ada-tasks.c::read_atcb: start from a cleared ada_task_info result

The purpose of this patch is not to fix a bug per se, but rather
to robustify this function to make sure it never returns a struct
ada_task_info where some of the fields are left uninitialized.
Reading the current implementation, it attempts to methodically
set them all one by one: but it's not excluded that a future
change might miss something. A memset is cheap and make sure that
this function returns repeatable results.

This in turns allows us to remove some assignments which have become
redundant.

gdb/ChangeLog:

* ada-tasks.c (read_atcb): Clear task_info before computing
the value of each of its fields.

Enhance objdump's --disassemble switch so that it can now take an optional parameter, specifying the starting symbol for disassembly. Disassembly will continue from this symbol up to the next symbol.

* objdump.c (long_options): Have the --disassemble option take an
optional argument.
(usage): Add description for the `symbol' argument to the
--disassemble option.
(disasm_sym): New file private variable.
(struct objdump_disasm_info): New field `symbol'.
(disassemble_section): Introduce `do_print' local variable
to control whether objdump displays the result of disassembling
for a symbol or not.
(main): Set `symbol' file private variable if the option argument
for the --disassemble option is given.
* doc/binutils.texi (objdump): Add description for the option
argument.
* NEWS: Mention the new feature.
* testsuite/binutils-all/objdump.exp: Add tests of the -d and
--disassemble=<symbol> options.
* testsuite/binutils-all/bintest.s: Add more symbols and code.
* testsuite/binutils-all/readelf.s: Update expected output.
* testsuite/binutils-all/readelf.ss-64: Likewise.
* testsuite/binutils-all/readelf.ss-mips: Likewise.
* testsuite/binutils-all/readelf.ss-tmips: Likewise.

Add updated French and Portuguese translations.

gas * po/fr.po: Updated French translation.
bfd * po/fr.po: Updated French translation.
* po/pt.po: Updated Portuguese translation.
binutils* po/pt.po: Updated Portuguese translation.

Add support for new load commands added by Apple to the MACH-O file format.

bfd * mach-o.h: Add new enums for BFD_MACH_O_PLATFORM_MACOS,
BFD_MACH_O_PLATFORM_IOS, BFD_MACH_O_PLATFORM_TVOS,
BFD_MACH_O_PLATFORM_WATCHOS, BFD_MACH_O_PLATFORM_BRIDGEOS,
BFD_MACH_O_TOOL_CLANG, BFD_MACH_O_TOOL_SWIFT, BFD_MACH_O_TOOL_LD.
(struct bfd_mach_o_note_command): New.
(struct bfd_mach_o_build_version_tool): New.
(struct bfd_mach_o_build_version_command): New.
(bfd_mach_o_read_version_min): Don't split version into
a few fields. Rename reserved to sdk.
* mach-o.c (bfd_mach_o_read_version_min): Don't split version into a
few fields. Rename reserved to sdk.
(bfd_mach_o_read_command): Handle LC_VERSION_MIN_TVOS, LC_NOTE,
LC_BUILD_VERSION.
(bfd_mach_o_read_note): New.
(bfd_mach_o_read_build_version): New.

PR 23728
binutils* od-macho.c (printf_version): New.
(dump_load_command): Use it to print version. Print sdk version. Print
version info for watchOS and tvOS. Print LC_NOTE, LC_BUILD_VERSION.
(dump_buld_version): New.
(bfd_mach_o_platform_name): New
(bfd_mach_o_tool_name): New

* mach-o/external.h (mach_o_nversion_min_command_external): Rename
reserved to sdk.
(mach_o_note_command_external): New.
(mach_o_build_version_command_external): New.
* mach-o/loader.h (BFD_MACH_O_LC_VERSION_MIN_TVOS): Define.
(BFD_MACH_O_LC_NOTE): Define.

gdb: Guard against NULL dereference in dwarf2_init_integer_type

In this commit:

    commit eb77c9df9f6d2f7aa644a170280fe31ce080f887
    Date:   Thu Oct 18 14:04:27 2018 +0100

        gdb: Handle ICC's unexpected void return type

A potential dereference of a NULL pointer was introduced if a
DW_TAG_base_type is missing a DW_AT_name attribute.

I have taken this opportunity to fix a slight confusion that existed
in the test also added in the above commit, the test had two C
variables, declared like this:

    int var_a = 5;

    void *var_ptr = &var_a;

However, the fake DWARF in the test script declared them like this:

    void var_a = 5;

    void *var_ptr = &var_a;

This wasn't a problem as the test never uses 'var_a' directly, this
only exists so 'var_ptr' can be initialised.  However, it seemed worth
fixing.

I've also added a test for a DW_TAG_base_type with a missing
DW_AT_name, as clearly there's not test currently that covers this
(the original patch tested cleanly).  I can confirm that the new test
causes GDB to crash before this patch, and passes with this patch.

gdb/ChangeLog:

* dwarf2read.c (dwarf2_init_integer_type): Check for name being
NULL before dereferencing it.

gdb/testsuite/ChangeLog:

* gdb.dwarf2/void-type.exp: Rename types, and make var_a an 'int'.
* gdb.dwarf2/missing-type-name.exp: New file.

Regen bfd/configure

* configure: Regenerate.

rx: Add target rx-*-linux.

Automatic date update in version.in

[gdb] Fix gdb crash when reading core file

Consider the test-case from this patch, compiled with O0.

The executable segfaults, and generates a core dump:
...
$ ./a.out
Segmentation fault (core dumped)
...

When loading the core file, limiting stack size to 4MB, gdb crashes:
...
$ ulimit -s 4096
$ gdb -batch ./a.out core.saved
[New LWP 19379]
Segmentation fault (core dumped)
...

The crash originates here in linux_vsyscall_range_raw, where we call alloca
with phdrs_size == 4194112 (roughly 4MB):
...
phdrs = (Elf_Internal_Phdr *) alloca (phdrs_size);
...

While for this test-case gdb runs fine with the system default stack limit of
8MB, there are cases reported of 12MB phdrs_size where gdb also crashes with
the system default stack limit.

Fix this by using xmalloc instead of alloca, which prevents the crash provided
the stack limit is at least 112kb.

Build and reg-tested on x86_64-linux.

2018-11-06 Tom de Vries <tdevries@suse.de>

* linux-tdep.c (linux_vsyscall_range_raw): Use xmalloc to allocate
program headers.

* gdb.base/many-headers.c: New test.
* gdb.base/many-headers.exp: New file.

RISC-V: Force variables to .data for code_elim.

RISC-V puts a global variable in .sdata by default, which causes the
add-symbol-file commands with -s .data to fail as there is no .data section.
This fixes 3 testsuite failures.

gdb/testsuite/
* gdb.base/code_elim.exp: For riscv, set additional_flags
to include -msmall-data-limit=0.

gdb: xtensa: use linux ABI code for uclinux

gdb/
2018-11-06 Max Filippov <jcmvbkbc@gmail.com>

* configure.tgt (xtensa*-*-linux*): Change to xtensa*-*-*linux*
so that it applies to uclinux as well.