gcc.git
4 years ago[amdgcn] Add support for sub-word sync_compare_and_swap operations
Kwok Cheung Yeung [Thu, 9 Jan 2020 15:35:14 +0000 (15:35 +0000)]
[amdgcn] Add support for sub-word sync_compare_and_swap operations

2020-01-09  Kwok Cheung Yeung  <kcy@codesourcery.com>

libgcc/
* config/gcn/atomic.c: New.
* config/gcn/t-amdgcn (LIB2ADD): Add atomic.c.

From-SVN: r280055

4 years ago[AArch64] Simplify WHILERW and WHILEWR definition
Richard Sandiford [Thu, 9 Jan 2020 15:26:51 +0000 (15:26 +0000)]
[AArch64] Simplify WHILERW and WHILEWR definition

I'd made WHILERW and WHILEWR use separate patterns from the SVE
WHILE instructions, but they're similar enough that we can use
a single pattern.  This means that we also get the flag-related
patterns "for free".

2020-01-09  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* config/aarch64/iterators.md (SVE_WHILE): Add UNSPEC_WHILERW
and UNSPEC_WHILEWR.
(while_optab_cmp): Handle them.
* config/aarch64/aarch64-sve.md
(*while_<while_optab_cmp><GPI:mode><PRED_ALL:mode>_ptest): Make public
and add a "@" marker.
* config/aarch64/aarch64-sve2.md (check_<raw_war>_ptrs<mode>): Use it
instead of gen_aarch64_sve2_while_ptest.
(@aarch64_sve2_while<cmp_op><GPI:mode><PRED_ALL:mode>_ptest): Delete.

From-SVN: r280054

4 years ago[AArch64] Rename UNSPEC_WHILE* to match instruction mnemonics
Richard Sandiford [Thu, 9 Jan 2020 15:24:04 +0000 (15:24 +0000)]
[AArch64] Rename UNSPEC_WHILE* to match instruction mnemonics

The UNSPEC_WHILE*s had an underscore before the condition code,
whereas almost all other SVE unspecs are taken directly from
the mnemonic.

2020-01-09  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* config/aarch64/aarch64.md (UNSPEC_WHILE_LE): Rename to...
(UNSPEC_WHILELE): ...this.
(UNSPEC_WHILE_LO): Rename to...
(UNSPEC_WHILELO): ...this.
(UNSPEC_WHILE_LS): Rename to...
(UNSPEC_WHILELS): ...this.
(UNSPEC_WHILE_LT): Rename to...
(UNSPEC_WHILELT): ...this.
* config/aarch64/iterators.md (SVE_WHILE): Update accordingly.
(cmp_op, while_optab_cmp): Likewise.
* config/aarch64/aarch64.c (aarch64_sve_move_pred_via_while): Likewise.
* config/aarch64/aarch64-sve-builtins-base.cc (svwhilele): Likewise.
(svwhilelt): Likewise.

From-SVN: r280053

4 years ago[AArch64] Rename SVE shape "unary_count" to "unary_to_uint"
Richard Sandiford [Thu, 9 Jan 2020 15:21:47 +0000 (15:21 +0000)]
[AArch64] Rename SVE shape "unary_count" to "unary_to_uint"

The SVE ACLE shape names use "_int" and "_uint" for arguments that are
signed-integer or unsigned-integer variants of the main vector type.
With SVE2 this variation also becomes common for return values,
which the main SVE2 patch handles using "_to_int" and "_to_uint".
This patch renames the existing unary_count shape to match the
new scheme.

2020-01-09  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* config/aarch64/aarch64-sve-builtins-shapes.h (unary_count): Delete.
(unary_to_uint): Define.
* config/aarch64/aarch64-sve-builtins-shapes.cc (unary_count_def)
(unary_count): Rename to...
(unary_to_uint_def, unary_to_uint): ...this.
* config/aarch64/aarch64-sve-builtins-base.def: Update accordingly.

gcc/testsuite/
* gcc.target/aarch64/sve/acle/general-c/unary_count_1.c: Rename to...
* gcc.target/aarch64/sve/acle/general-c/unary_to_uint_1.c: ...this.
* gcc.target/aarch64/sve/acle/general-c/unary_count_2.c: Rename to...
* gcc.target/aarch64/sve/acle/general-c/unary_to_uint_2.c: ...this.
* gcc.target/aarch64/sve/acle/general-c/unary_count_3.c: Rename to...
* gcc.target/aarch64/sve/acle/general-c/unary_to_uint_3.c: ...this.

From-SVN: r280052

4 years ago[AArch64] Specify some SVE ACLE functions in a more generic way
Richard Sandiford [Thu, 9 Jan 2020 15:18:32 +0000 (15:18 +0000)]
[AArch64] Specify some SVE ACLE functions in a more generic way

This patch generalises some boilerplate that becomes much more
common with SVE2 intrinsics.

2020-01-09  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* config/aarch64/aarch64-sve-builtins-functions.h
(code_for_mode_function): New class.
(CODE_FOR_MODE0, QUIET_CODE_FOR_MODE0): New macros.
* config/aarch64/aarch64-sve-builtins-base.cc (svcompact_impl)
(svext_impl, svmul_lane_impl, svsplice_impl, svtmad_impl): Delete.
(svcompact, svext, svsplice): Use QUIET_CODE_FOR_MODE0.
(svmul_lane, svtmad): Use CODE_FOR_MODE0.

From-SVN: r280051

4 years ago[AArch64] Tweak iterator usage for [SU]Q{ADD,SUB}
Richard Sandiford [Thu, 9 Jan 2020 15:15:17 +0000 (15:15 +0000)]
[AArch64] Tweak iterator usage for [SU]Q{ADD,SUB}

The pattern:

;; <su>q<addsub>

(define_insn "aarch64_<su_optab><optab><mode>"
  [(set (match_operand:VSDQ_I 0 "register_operand" "=w")
(BINQOPS:VSDQ_I (match_operand:VSDQ_I 1 "register_operand" "w")
  (match_operand:VSDQ_I 2 "register_operand" "w")))]
  "TARGET_SIMD"
  "<su_optab><optab>\\t%<v>0<Vmtype>, %<v>1<Vmtype>, %<v>2<Vmtype>"
  [(set_attr "type" "neon_<optab><q>")]
)

meant that we overloaded "optab" to be "qadd" for both SQADD and
UQADD.  Most other "optab" entries are instead the full optab name,
which for these patterns would be "ssadd" and "usadd" respectively.
(Unfortunately, the optabs don't extend to vectors yet, something
that would be good to fix in GCC 11.)

This patch therefore does what the comment implies and uses
q<addsub> to distinguish qadd and qsub instead.

2020-01-09  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* config/aarch64/iterators.md (addsub): New code attribute.
* config/aarch64/aarch64-simd.md (aarch64_<su_optab><optab><mode>):
Re-express as...
(aarch64_<su_optab>q<addsub><mode>): ...this, making the same change
in the asm string and attributes.  Fix indentation.
* config/aarch64/aarch64-sve.md (@aarch64_<su_optab><optab><mode>):
Re-express as...
(@aarch64_sve_<optab><mode>): ...this.
* config/aarch64/aarch64-sve-builtins.h
(function_expander::expand_signed_unpred_op): Delete.
* config/aarch64/aarch64-sve-builtins.cc
(function_expander::expand_signed_unpred_op): Likewise.
(function_expander::map_to_rtx_codes): If the optab isn't defined,
try using code_for_aarch64_sve instead.
* config/aarch64/aarch64-sve-builtins-base.cc (svqadd_impl): Delete.
(svqsub_impl): Likewise.
(svqadd, svqsub): Use rtx_code_function instead.

From-SVN: r280050

4 years ago[AArch64] Remove fictitious [SU]RHSUB instructions
Richard Sandiford [Thu, 9 Jan 2020 15:11:34 +0000 (15:11 +0000)]
[AArch64] Remove fictitious [SU]RHSUB instructions

We've had skeleton support for "SRHSUB" and "URHSUB" since the initial
commit of the port, but no such instructions exist.

2020-01-09  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* config/aarch64/iterators.md (SRHSUB, URHSUB): Delete.
(HADDSUB, sur, addsub): Remove them.

From-SVN: r280049

4 years agoFix tree-nrv.c ICE for direct internal functions
Richard Sandiford [Thu, 9 Jan 2020 15:09:09 +0000 (15:09 +0000)]
Fix tree-nrv.c ICE for direct internal functions

pass_return_slot::execute has:

      /* Ignore internal functions without direct optabs,
 those are expanded specially and aggregate_value_p
 on their result might result in undesirable warnings
 with some backends.  */
      && (!gimple_call_internal_p (stmt)
  || direct_internal_fn_p (gimple_call_internal_fn (stmt)))
      && aggregate_value_p (TREE_TYPE (gimple_call_lhs (stmt)),
    gimple_call_fndecl (stmt)))

But what the comment says applies to directly-mapped internal functions
too, since they're only used if the target supports them without a
libcall.

This was triggering an ICE on the attached testcase.  The svld3 call
is folded to an IFN_LOAD_LANES, which returns an array of vectors with
VNx48QImode.  Since no such return type can exist in C, the target hook
was complaining about an unexpected use of SVE modes.  (And we want to
keep asserting for that, so that we don't accidentally define an ABI for
an unexpected corner case.)

2020-01-09  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* tree-nrv.c (pass_return_slot::execute): Handle all internal
functions the same way, rather than singling out those that
aren't mapped directly to optabs.

gcc/testsuite/
* gcc.target/aarch64/sve/acle/general/nrv_1.c: New test.

From-SVN: r280048

4 years agoAdd a compatible_vector_types_p target hook
Richard Sandiford [Thu, 9 Jan 2020 15:08:26 +0000 (15:08 +0000)]
Add a compatible_vector_types_p target hook

One problem with adding an N-bit vector extension to an existing
architecture is to decide how N-bit vectors should be passed to
functions and returned from functions.  Allowing all N-bit vector
types to be passed in registers breaks backwards compatibility,
since N-bit vectors could be used (and emulated) before the vector
extension was added.  But always passing N-bit vectors on the
stack would be inefficient for things like vector libm functions.

For SVE we took the compromise position of predefining new SVE vector
types that are distinct from all existing vector types, including
GNU-style vectors.  The new types are passed and returned in an
efficient way while existing vector types are passed and returned
in the traditional way.  In the right circumstances, the two types
are inter-convertible.

The SVE types are created using:

      vectype = build_distinct_type_copy (vectype);
      SET_TYPE_STRUCTURAL_EQUALITY (vectype);
      TYPE_ARTIFICIAL (vectype) = 1;

The C frontend maintains this distinction, using VIEW_CONVERT_EXPR
to convert from one type to the other.  However, the distinction can
be lost during gimple, which treats two vector types with the same
mode, number of elements, and element type as equivalent.  And for
most targets that's the right thing to do.

This patch therefore adds a hook that lets the target choose
whether such vector types are indeed equivalent.

Note that the new tests fail for -mabi=ilp32 in the same way as other
ACLE-based tests.  I'm still planning to fix that as a follow-on.

2020-01-09  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* target.def (compatible_vector_types_p): New target hook.
* hooks.h (hook_bool_const_tree_const_tree_true): Declare.
* hooks.c (hook_bool_const_tree_const_tree_true): New function.
* doc/tm.texi.in (TARGET_COMPATIBLE_VECTOR_TYPES_P): New hook.
* doc/tm.texi: Regenerate.
* gimple-expr.c: Include target.h.
(useless_type_conversion_p): Use targetm.compatible_vector_types_p.
* config/aarch64/aarch64.c (aarch64_compatible_vector_types_p): New
function.
(TARGET_COMPATIBLE_VECTOR_TYPES_P): Define.
* config/aarch64/aarch64-sve-builtins.cc (gimple_folder::convert_pred):
Use the original predicate if it already has a suitable type.

gcc/testsuite/
* gcc.target/aarch64/sve/pcs/gnu_vectors_1.c: New test.
* gcc.target/aarch64/sve/pcs/gnu_vectors_2.c: Likewise.

From-SVN: r280047

4 years agoFortran] PR84135 fix merging dimension into codimension array spec
Tobias Burnus [Thu, 9 Jan 2020 13:43:59 +0000 (14:43 +0100)]
Fortran] PR84135 fix merging dimension into codimension array spec

        PR fortran/84135
        * array.c (gfc_set_array_spec): Fix shifting of codimensions
        when adding a dimension.
        * decl.c (merge_array_spec): Ditto. Fix using correct codimensions.

        PR fortran/84135
        * gfortran.dg/coarray/codimension_3.f90: New.

From-SVN: r280046

4 years agolibstdc++: Define memory resource key functions non-inline (PR93208)
Jonathan Wakely [Thu, 9 Jan 2020 13:18:20 +0000 (13:18 +0000)]
libstdc++: Define memory resource key functions non-inline (PR93208)

This prevents the vtables and RTTI from being emitted in every object
file that uses memory_resource and monotonic_buffer_resource.

Objects compiled by GCC 9.1 or 9.2 will contain inline definitions of
the destructors, vtable and RTTI, but this is harmless. The inline
definitions have identical effects to the ones that are now defined in
libstdc++.so so it doesn't matter if the inline ones are used instead of
calling the symbols exported from the runtime library.

PR libstdc++/93208
* config/abi/pre/gnu.ver: Add new exports.
* include/std/memory_resource (memory_resource::~memory_resource()):
Do not define inline.
(monotonic_buffer_resource::~monotonic_buffer_resource()): Likewise.
* src/c++17/memory_resource.cc (memory_resource::~memory_resource()):
Define.
(monotonic_buffer_resource::~monotonic_buffer_resource()): Define.
* testsuite/20_util/monotonic_buffer_resource/93208.cc: New test.

From-SVN: r280044

4 years agoMake cgraph_edge::resolve-speculation static
Martin Jambor [Thu, 9 Jan 2020 12:21:48 +0000 (13:21 +0100)]
Make cgraph_edge::resolve-speculation static

2020-01-09  Martin Jambor  <mjambor@suse.cz>

* cgraph.h (cgraph_edge): Make remove, set_call_stmt, make_direct,
resolve_speculation and redirect_call_stmt_to_callee static.  Change
return type of set_call_stmt to cgraph_edge *.
* auto-profile.c (afdo_indirect_call): Adjust call to
redirect_call_stmt_to_callee.
* cgraph.c (cgraph_edge::set_call_stmt): Make return cgraph-edge *,
make the this pointer explicit, adjust self-recursive calls and the
call top make_direct.  Return the resulting edge.
(cgraph_edge::remove): Make this pointer explicit.
(cgraph_edge::resolve_speculation): Likewise, adjust call to remove.
(cgraph_edge::make_direct): Likewise, adjust call to
resolve_speculation.
(cgraph_edge::redirect_call_stmt_to_callee): Likewise, also adjust
call to set_call_stmt.
(cgraph_update_edges_for_call_stmt_node): Update call to
set_call_stmt and remove.
* cgraphclones.c (cgraph_node::set_call_stmt_including_clones):
Renamed edge to master_edge.  Adjusted calls to set_call_stmt.
(cgraph_node::create_edge_including_clones): Moved "first" definition
of edge to the block where it was used.  Adjusted calls to
set_call_stmt.
(cgraph_node::remove_symbol_and_inline_clones): Adjust call to
cgraph_edge::remove.
* cgraphunit.c (walk_polymorphic_call_targets): Adjusted calls to
make_direct and redirect_call_stmt_to_callee.
* ipa-fnsummary.c (redirect_to_unreachable): Adjust calls to
resolve_speculation and make_direct.
* ipa-inline-transform.c (inline_transform): Adjust call to
redirect_call_stmt_to_callee.
(check_speculations_1):: Adjust call to resolve_speculation.
* ipa-inline.c (resolve_noninline_speculation): Adjust call to
resolve-speculation.
(inline_small_functions): Adjust call to resolve_speculation.
(ipa_inline): Likewise.
* ipa-prop.c (ipa_make_edge_direct_to_target): Adjust call to
make_direct.
* ipa-visibility.c (function_and_variable_visibility): Make iteration
safe with regards to edge removal, adjust calls to
redirect_call_stmt_to_callee.
* ipa.c (walk_polymorphic_call_targets): Adjust calls to make_direct
and redirect_call_stmt_to_callee.
* multiple_target.c (create_dispatcher_calls): Adjust call to
redirect_call_stmt_to_callee
(redirect_to_specific_clone): Likewise.
* tree-cfgcleanup.c (delete_unreachable_blocks_update_callgraph):
Adjust calls to cgraph_edge::remove.
* tree-inline.c (copy_bb): Adjust call to set_call_stmt.
(redirect_all_calls): Adjust call to redirect_call_stmt_to_callee.
(expand_call_inline): Adjust call to cgraph_edge::remove.

From-SVN: r280043

4 years agoSet Optimization for param_max_speculative_devirt_maydefs.
Martin Liska [Thu, 9 Jan 2020 12:17:12 +0000 (13:17 +0100)]
Set Optimization for param_max_speculative_devirt_maydefs.

2020-01-09  Martin Liska  <mliska@suse.cz>

* params.opt: Set Optimization for
param_max_speculative_devirt_maydefs.

From-SVN: r280042

4 years agoPR middle-end/93200 - spurious -Wstringop-overflow due to assignment vectorization...
Martin Sebor [Thu, 9 Jan 2020 11:59:41 +0000 (11:59 +0000)]
PR middle-end/93200 - spurious -Wstringop-overflow due to assignment vectorization to multiple members

PR middle-end/93200 - spurious -Wstringop-overflow due to assignment vectorization to multiple members
PR fortran/92956 - 'libgomp.fortran/examples-4/async_target-2.f90' fails with offloading due to bogus -Wstringop-overflow warning

gcc/testsuite/ChangeLog:

PR middle-end/93200
* gcc.dg/Wstringop-overflow-30.c: New test.

gcc/ChangeLog:

PR middle-end/93200
PR fortran/92956
* builtins.c (compute_objsize): Avoid handling MEM_REFs of vector type.

From-SVN: r280041

4 years agoAdd Optimization for various IPA parameters.
Martin Liska [Thu, 9 Jan 2020 11:29:23 +0000 (12:29 +0100)]
Add Optimization for various IPA parameters.

2020-01-09  Martin Liska  <mliska@suse.cz>

* auto-profile.c (auto_profile): Use opt_for_fn
for a parameter.
* ipa-cp.c (ipcp_lattice::add_value): Likewise.
(propagate_vals_across_arith_jfunc): Likewise.
(hint_time_bonus): Likewise.
(incorporate_penalties): Likewise.
(good_cloning_opportunity_p): Likewise.
(perform_estimation_of_a_value): Likewise.
(estimate_local_effects): Likewise.
(ipcp_propagate_stage): Likewise.
* ipa-fnsummary.c (decompose_param_expr): Likewise.
(set_switch_stmt_execution_predicate): Likewise.
(analyze_function_body): Likewise.
* ipa-inline-analysis.c (offline_size): Likewise.
* ipa-inline.c (early_inliner): Likewise.
* ipa-prop.c (ipa_analyze_node): Likewise.
(ipcp_transform_function): Likewise.
* ipa-sra.c (process_scan_results): Likewise.
(ipa_sra_summarize_function): Likewise.
* params.opt: Rename ipcp-unit-growth to
ipa-cp-unit-growth.  Add Optimization for various
IPA-related parameters.

From-SVN: r280040

4 years agore PR tree-optimization/93054 (ICE in gimple_set_lhs, at gimple.c:1820)
Richard Biener [Thu, 9 Jan 2020 10:41:38 +0000 (10:41 +0000)]
re PR tree-optimization/93054 (ICE in gimple_set_lhs, at gimple.c:1820)

2020-01-09  Richard Biener  <rguenther@suse.de>

PR middle-end/93054
* gimplify.c (gimplify_expr): Deal with NOP definitions.

* gcc.dg/pr93054.c: New testcase.

From-SVN: r280039

4 years agore PR tree-optimization/93040 (gcc doesn't optimize unaligned accesses to a 16-bit...
Richard Biener [Thu, 9 Jan 2020 10:29:54 +0000 (10:29 +0000)]
re PR tree-optimization/93040 (gcc doesn't optimize unaligned accesses to a 16-bit value on the x86 as well as it does a 32-bit value (or clang))

2020-01-09  Richard Biener  <rguenther@suse.de>

PR tree-optimization/93040
* gimple-ssa-store-merging.c (find_bswap_or_nop): Raise search limit.

* gcc.dg/optimize-bswaphi-1.c: Amend.
* gcc.dg/optimize-bswapsi-2.c: Likewise.

From-SVN: r280034

4 years agoavr-common.c (avr_option_optimization_table): Set -fsplit-wide-types-early.
Georg-Johann Lay [Thu, 9 Jan 2020 09:29:30 +0000 (09:29 +0000)]
avr-common.c (avr_option_optimization_table): Set -fsplit-wide-types-early.

* common/config/avr/avr-common.c (avr_option_optimization_table)
[OPT_LEVELS_1_PLUS]: Set -fsplit-wide-types-early.

From-SVN: r280033

4 years agoOne more usage of cgraph_node::dump_name.
Martin Liska [Thu, 9 Jan 2020 08:25:47 +0000 (09:25 +0100)]
One more usage of cgraph_node::dump_name.

2020-01-09  Martin Liska  <mliska@suse.cz>

* cgraphclones.c (symbol_table::materialize_all_clones):
Use cgraph_node::dump_name.

From-SVN: r280031

4 years agore PR inline-asm/93202 ([RISCV] ICE when using inline asm 'h' operand modifier)
Jakub Jelinek [Thu, 9 Jan 2020 08:20:25 +0000 (09:20 +0100)]
re PR inline-asm/93202 ([RISCV] ICE when using inline asm 'h' operand modifier)

PR inline-asm/93202
* config/riscv/riscv.c (riscv_print_operand_reloc): Use
output_operand_lossage instead of gcc_unreachable.
* doc/md.texi (riscv f constraint): Fix typo.

* gcc.target/riscv/pr93202.c: New test.

From-SVN: r280030

4 years agore PR target/93141 (Missed optimization : Use of adc when checking overflow)
Jakub Jelinek [Thu, 9 Jan 2020 08:18:51 +0000 (09:18 +0100)]
re PR target/93141 (Missed optimization : Use of adc when checking overflow)

PR target/93141
* config/i386/i386.md (subv<mode>4): Use SWIDWI iterator instead of
SWI.  Use <general_hilo_operand> instead of <general_operand>.  Use
CONST_SCALAR_INT_P instead of CONST_INT_P.
(*subv<mode>4_1): Rename to ...
(subv<mode>4_1): ... this.
(*subv<dwi>4_doubleword, *addv<dwi>4_doubleword_1): New
define_insn_and_split patterns.
(*subv<mode>4_overflow_1, *addv<mode>4_overflow_2): New define_insn
patterns.

* gcc.target/i386/pr93141-1.c: Add tests with constants that have MSB
of the low half of the constant set.
* gcc.target/i386/pr93141-2.c: New test.

From-SVN: r280029

4 years agoPR libstdc++/92124 fix incorrect unordered container move assignment
François Dumont [Thu, 9 Jan 2020 05:40:08 +0000 (05:40 +0000)]
PR libstdc++/92124 fix incorrect unordered container move assignment

* include/bits/hashtable.h (_Hashtable<>::__alloc_node_gen_t): New
template alias.
(_Hashtable<>::__fwd_value_for): New.
(_Hashtable<>::_M_assign_elements<>): Remove _NodeGenerator template
parameter.
(_Hashtable<>::_M_assign<>): Add _Ht template parameter.
(_Hashtable<>::operator=(const _Hashtable<>&)): Adapt.
(_Hashtable<>::_M_move_assign): Adapt. Replace std::move_if_noexcept
with std::move.
(_Hashtable<>::_Hashtable(const _Hashtable&)): Adapt.
(_Hashtable<>::_Hashtable(const _Hashtable&, const allocator_type&)):
Adapt.
(_Hashtable<>::_Hashtable(_Hashtable&&, const allocator_type&)):
Adapt.
* testsuite/23_containers/unordered_set/92124.cc: New.

From-SVN: r280028

4 years agovec.h: add auto_delete_vec
David Malcolm [Thu, 9 Jan 2020 01:39:45 +0000 (01:39 +0000)]
vec.h: add auto_delete_vec

This patch adds a class auto_delete_vec<T>, a subclass of auto_vec <T *>
that deletes all of its elements on destruction; it's used in many
places in the analyzer patch kit.

This is a crude way for a vec to "own" the objects it points to
and clean up automatically (essentially a workaround for not being able
to use unique_ptr, due to C++98).

gcc/ChangeLog:
* vec.c (class selftest::count_dtor): New class.
(selftest::test_auto_delete_vec): New test.
(selftest::vec_c_tests): Call it.
* vec.h (class auto_delete_vec): New class template.
(auto_delete_vec<T>::~auto_delete_vec): New dtor.

From-SVN: r280027

4 years agosbitmap.h: add operator const_sbitmap to auto_sbitmap
David Malcolm [Thu, 9 Jan 2020 01:35:59 +0000 (01:35 +0000)]
sbitmap.h: add operator const_sbitmap to auto_sbitmap

gcc/ChangeLog:
* sbitmap.h (auto_sbitmap): Add operator const_sbitmap.

From-SVN: r280026

4 years agoRISC-V: Disable use of TLS copy relocs.
Jim Wilson [Thu, 9 Jan 2020 01:04:45 +0000 (01:04 +0000)]
RISC-V: Disable use of TLS copy relocs.

Musl and lld don't support TLS copy relocs, and don't want to add support
for this feature which is unique to RISC-V.  Only GNU ld and glibc support
them.  In the pasbi discussion, people have pointed out various problems
with using them, so we are deprecating them.  There doesn't seem to be an
ABI break from dropping them so this patch modifies gcc to stop creating
them.  I'm using an ifdef for now in case a problem turns up and the code
has to be re-enabled.  The plan is to add an initial to local exec
relaxation as a replacement, though this has not been defined or
implemented yet.

gcc/
* config/riscv/riscv.c (riscv_legitimize_tls_address): Ifdef out
use of TLS_MODEL_LOCAL_EXEC when not pic.

From-SVN: r280025

4 years agoDaily bump.
GCC Administrator [Thu, 9 Jan 2020 00:16:16 +0000 (00:16 +0000)]
Daily bump.

From-SVN: r280024

4 years agoAdd TARGET_EXPR_DIRECT_INIT_P sanity check.
Jason Merrill [Wed, 8 Jan 2020 20:31:25 +0000 (15:31 -0500)]
Add TARGET_EXPR_DIRECT_INIT_P sanity check.

* cp-gimplify.c (cp_gimplify_expr) [TARGET_EXPR]: Check
TARGET_EXPR_DIRECT_INIT_P.
* constexpr.c (cxx_eval_constant_expression): Likewise.

From-SVN: r280019

4 years agoPR c++/91369 - constexpr destructor and member initializer.
Jason Merrill [Wed, 8 Jan 2020 20:31:20 +0000 (15:31 -0500)]
PR c++/91369 - constexpr destructor and member initializer.

Previously it didn't matter whether we looked through a TARGET_EXPR in
constexpr evaluation, but now that we have constexpr destructors it does.
On IRC I mentioned the idea of clearing TARGET_EXPR_CLEANUP in
digest_nsdmi_init, but since this initialization is expressed by an
INIT_EXPR, it's better to handle all INIT_EXPR, not just those for a member
initializer.

* constexpr.c (cxx_eval_store_expression): Look through TARGET_EXPR
when not preevaluating.

From-SVN: r280018

4 years agoRemove constexpr support for DECL_BY_REFERENCE.
Jason Merrill [Wed, 8 Jan 2020 20:31:16 +0000 (15:31 -0500)]
Remove constexpr support for DECL_BY_REFERENCE.

Since we switched to doing constexpr evaluation on pre-GENERIC trees,
we don't have to handle DECL_BY_REFERENCE.

* constexpr.c (cxx_eval_call_expression): Remove DECL_BY_REFERENCE
support.

From-SVN: r280017

4 years ago* gcc.dg/Wstringop-overflow-27.c: Make testnames unique.
Jeff Law [Wed, 8 Jan 2020 18:46:33 +0000 (11:46 -0700)]
* gcc.dg/Wstringop-overflow-27.c: Make testnames unique.

From-SVN: r280016

4 years agohash-map-tests.c: fix memory leak
David Malcolm [Wed, 8 Jan 2020 18:45:26 +0000 (18:45 +0000)]
hash-map-tests.c: fix memory leak

This commit makes "make selftest-valgrind" clean by fixing this leak:

4 bytes in 1 blocks are definitely lost in loss record 1 of 734
   at 0x483AB1A: calloc (vg_replace_malloc.c:762)
   by 0x261DBE0: xcalloc (xmalloc.c:162)
   by 0x2538C46: selftest::test_map_of_strings_to_int() (hash-map-tests.c:87)
   by 0x253ABD2: selftest::hash_map_tests_c_tests() (hash-map-tests.c:307)
   by 0x24A885B: selftest::run_tests() (selftest-run-tests.c:65)
   by 0x1373D80: toplev::run_self_tests() (toplev.c:2339)
   by 0x1373FA7: toplev::main(int, char**) (toplev.c:2421)
   by 0x2550EFF: main (main.c:39)

gcc/ChangeLog:
* hash-map-tests.c (selftest::test_map_of_strings_to_int): Fix
memory leak.

From-SVN: r280015

4 years agolibstdc++: Fix error handling in filesystem::remove_all (PR93201)
Jonathan Wakely [Wed, 8 Jan 2020 16:44:45 +0000 (16:44 +0000)]
libstdc++: Fix error handling in filesystem::remove_all (PR93201)

When recursing into a directory, any errors that occur while removing a
directory entry are ignored, because the subsequent increment of the
directory iterator clears the error_code object.

This fixes that bug by checking the result of each recursive operation
before incrementing. This is a change in observable behaviour, because
previously other directory entries would still be removed even if one
(or more) couldn't be removed due to errors. Now the operation stops on
the first error, which is what the code intended to do all along. The
standard doesn't specify what happens in this case (because the order
that the entries are processed is unspecified anyway).

It also improves the error reporting so that the name of the file that
could not be removed is included in the filesystem_error exception. This
is done by introducing a new helper type for reporting errors with
additional context and a new function that uses that type. Then the
overload of std::filesystem::remove_all that throws an exception can use
the new function to ensure any exception contains the additional
information.

For std::experimental::filesystem::remove_all just fix the bug where
errors are ignored.

PR libstdc++/93201
* src/c++17/fs_ops.cc (do_remove_all): New function implementing more
detailed error reporting for remove_all. Check result of recursive
call before incrementing iterator.
(remove_all(const path&), remove_all(const path&, error_code&)): Use
do_remove_all.
* src/filesystem/ops.cc (remove_all(const path&, error_code&)): Check
result of recursive call before incrementing iterator.
* testsuite/27_io/filesystem/operations/remove_all.cc: Check errors
are reported correctly.
* testsuite/experimental/filesystem/operations/remove_all.cc: Likewise.

From-SVN: r280014

4 years agoAdd missing { dg-require-effective-target fpic } to aarch64 tests
Joel Brobecker [Wed, 8 Jan 2020 16:22:27 +0000 (16:22 +0000)]
Add missing { dg-require-effective-target fpic } to aarch64 tests

2020-01-08  Joel Brobecker  <brobecker@adacore.com>
          Olivier Hainque  <hainque@adacore.com>

testsuite/
* g++.target/aarch64/sve/tls_2.C: Add missing
{ dg-require-effective-target fpic } directive.
* gcc.target/aarch64/noplt_2.c: Likewise.
* gcc.target/aarch64/noplt_3.c: Likewise.
* gcc.target/aarch64/pic-constantpool1.c: Likewise.
* gcc.target/aarch64/pic-small.c: Likewise.
* gcc.target/aarch64/pic-symrefplus.c: Likewise.
* gcc.target/aarch64/pr66912.c: Likewise.
* gcc.target/aarch64/sve/tls_1.c: Likewise.
* gcc.target/aarch64/sve/tls_preserve_1.c: Likewise.
* gcc.target/aarch64/sve/tls_preserve_2.c: Likewise.
* gcc.target/aarch64/sve/tls_preserve_3.c: Likewise.
* gcc.target/aarch64/tlsie_tiny_1.c: Likewise.
* gcc.target/aarch64/tlsle12_1.c: Likewise.
* gcc.target/aarch64/tlsle12_tiny_1.c: Likewise.
* gcc.target/aarch64/tlsle24_1.c: Likewise.
* gcc.target/aarch64/tlsle24_tiny_1.c: Likewise.
* gcc.target/aarch64/tlsle32_1.c: Likewise.
* gcc.target/aarch64/tlsle_sizeadj_small_1.c: Likewise.
* gcc.target/aarch64/tlsle_sizeadj_tiny_1.c: Likewise.

Co-Authored-By: Olivier Hainque <hainque@adacore.com>
From-SVN: r280013

4 years agore PR target/93187 (ICE in extract_insn, at recog.c:2294)
Jakub Jelinek [Wed, 8 Jan 2020 15:59:20 +0000 (16:59 +0100)]
re PR target/93187 (ICE in extract_insn, at recog.c:2294)

PR target/93187
* config/i386/i386.md (*stack_protect_set_2_<mode> peephole2,
*stack_protect_set_3 peephole2): Also check that the second
insns source is general_operand.

* g++.dg/opt/pr93187.C: New test.

From-SVN: r280012

4 years agore PR target/93174 (ICE building glibc __sha512_process_block for i686)
Jakub Jelinek [Wed, 8 Jan 2020 15:58:20 +0000 (16:58 +0100)]
re PR target/93174 (ICE building glibc __sha512_process_block for i686)

PR target/93174
* config/i386/i386.md (addcarry<mode>_0): Use nonimmediate_operand
predicate for output operand instead of register_operand.
(addcarry<mode>, addcarry<mode>_1): Likewise.  Add alternative with
memory destination and non-memory operands[2].

* gcc.c-torture/compile/pr93174.c: New test.

From-SVN: r280011

4 years agorelax aarch64 stack-clash tests depedence on alloca.h
Olivier Hainque [Wed, 8 Jan 2020 15:53:16 +0000 (15:53 +0000)]
relax aarch64 stack-clash tests depedence on alloca.h

2020-01-06  Olivier Hainque  <hainque@adacore.com>
Alexandre Oliva  <oliva@adacore.com>

* gcc.target/aarch64/stack-check-alloca.h: Remove
#include alloca.h. #define alloca __builtin_alloca
instead.
* gcc.target/aarch64/stack-check-alloca-1.c: Add
{ dg-require-effective-target alloca }.
* gcc.target/aarch64/stack-check-alloca-2.c: Likewise.
* gcc.target/aarch64/stack-check-alloca-3.c: Likewise.
* gcc.target/aarch64/stack-check-alloca-4.c: Likewise.
* gcc.target/aarch64/stack-check-alloca-5.c: Likewise.
* gcc.target/aarch64/stack-check-alloca-6.c: Likewise.
* gcc.target/aarch64/stack-check-alloca-7.c: Likewise.
* gcc.target/aarch64/stack-check-alloca-8.c: Likewise.
* gcc.target/aarch64/stack-check-alloca-9.c: Likewise.
* gcc.target/aarch64/stack-check-alloca-10.c: Likewise.

Co-Authored-By: Alexandre Oliva <oliva@adacore.com>
From-SVN: r280010

4 years agoUse cgraph_node::dump_{asm_},name where possible.
Martin Liska [Wed, 8 Jan 2020 15:30:24 +0000 (16:30 +0100)]
Use cgraph_node::dump_{asm_},name where possible.

2020-01-08  Martin Liska  <mliska@suse.cz>

* cgraph.c (cgraph_node::dump): Use ::dump_name or
::dump_asm_name instead of (::name or ::asm_name).
* cgraphclones.c (symbol_table::materialize_all_clones): Likewise.
* cgraphunit.c (walk_polymorphic_call_targets): Likewise.
(analyze_functions): Likewise.
(expand_all_functions): Likewise.
* ipa-cp.c (ipcp_cloning_candidate_p): Likewise.
(propagate_bits_across_jump_function): Likewise.
(dump_profile_updates): Likewise.
(ipcp_store_bits_results): Likewise.
(ipcp_store_vr_results): Likewise.
* ipa-devirt.c (dump_targets): Likewise.
* ipa-fnsummary.c (analyze_function_body): Likewise.
* ipa-hsa.c (check_warn_node_versionable): Likewise.
(process_hsa_functions): Likewise.
* ipa-icf.c (sem_item_optimizer::merge_classes): Likewise.
(set_alias_uids): Likewise.
* ipa-inline-transform.c (save_inline_function_body): Likewise.
* ipa-inline.c (recursive_inlining): Likewise.
(inline_to_all_callers_1): Likewise.
(ipa_inline): Likewise.
* ipa-profile.c (ipa_propagate_frequency_1): Likewise.
(ipa_propagate_frequency): Likewise.
* ipa-prop.c (ipa_make_edge_direct_to_target): Likewise.
(remove_described_reference): Likewise.
* ipa-pure-const.c (worse_state): Likewise.
(check_retval_uses): Likewise.
(analyze_function): Likewise.
(propagate_pure_const): Likewise.
(propagate_nothrow): Likewise.
(dump_malloc_lattice): Likewise.
(propagate_malloc): Likewise.
(pass_local_pure_const::execute): Likewise.
* ipa-visibility.c (optimize_weakref): Likewise.
(function_and_variable_visibility): Likewise.
* ipa.c (symbol_table::remove_unreachable_nodes): Likewise.
(ipa_discover_variable_flags): Likewise.
* lto-streamer-out.c (output_function): Likewise.
(output_constructor): Likewise.
* tree-inline.c (copy_bb): Likewise.
* tree-ssa-structalias.c (ipa_pta_execute): Likewise.
* varpool.c (symbol_table::remove_unreferenced_decls): Likewise.
2020-01-08  Martin Liska  <mliska@suse.cz>

* lto-partition.c (add_symbol_to_partition_1): Use ::dump_name or
::dump_asm_name instead of (::name or ::asm_name).
(lto_balanced_map): Likewise.
(promote_symbol): Likewise.
(rename_statics): Likewise.
* lto.c (lto_wpa_write_files): Likewise.
2020-01-08  Martin Liska  <mliska@suse.cz>

* gcc.dg/ipa/ipa-icf-1.c: Update expected scanned output.
* gcc.dg/ipa/ipa-icf-10.c: Likewise.
* gcc.dg/ipa/ipa-icf-11.c: Likewise.
* gcc.dg/ipa/ipa-icf-12.c: Likewise.
* gcc.dg/ipa/ipa-icf-13.c: Likewise.
* gcc.dg/ipa/ipa-icf-16.c: Likewise.
* gcc.dg/ipa/ipa-icf-18.c: Likewise.
* gcc.dg/ipa/ipa-icf-2.c: Likewise.
* gcc.dg/ipa/ipa-icf-20.c: Likewise.
* gcc.dg/ipa/ipa-icf-21.c: Likewise.
* gcc.dg/ipa/ipa-icf-23.c: Likewise.
* gcc.dg/ipa/ipa-icf-25.c: Likewise.
* gcc.dg/ipa/ipa-icf-26.c: Likewise.
* gcc.dg/ipa/ipa-icf-27.c: Likewise.
* gcc.dg/ipa/ipa-icf-3.c: Likewise.
* gcc.dg/ipa/ipa-icf-35.c: Likewise.
* gcc.dg/ipa/ipa-icf-36.c: Likewise.
* gcc.dg/ipa/ipa-icf-37.c: Likewise.
* gcc.dg/ipa/ipa-icf-38.c: Likewise.
* gcc.dg/ipa/ipa-icf-5.c: Likewise.
* gcc.dg/ipa/ipa-icf-7.c: Likewise.
* gcc.dg/ipa/ipa-icf-8.c: Likewise.
* gcc.dg/ipa/ipa-icf-merge-1.c: Likewise.
* gcc.dg/ipa/pr64307.c: Likewise.
* gcc.dg/ipa/pr90555.c: Likewise.
* gcc.dg/ipa/propmalloc-1.c: Likewise.
* gcc.dg/ipa/propmalloc-2.c: Likewise.
* gcc.dg/ipa/propmalloc-3.c: Likewise.

From-SVN: r280009

4 years agolibgomp.texi: Fix typos, use https (actual change)
Tobias Burnus [Wed, 8 Jan 2020 15:00:39 +0000 (16:00 +0100)]
libgomp.texi: Fix typos, use https (actual change)

From-SVN: r280008

4 years agolibgomp.texi: Fix typos, use https.
Tobias Burnus [Wed, 8 Jan 2020 14:58:31 +0000 (15:58 +0100)]
libgomp.texi: Fix typos, use https.

From-SVN: r280007

4 years agore PR tree-optimization/93199 (Compile time hog in sink_clobbers)
Richard Biener [Wed, 8 Jan 2020 14:30:44 +0000 (14:30 +0000)]
re PR tree-optimization/93199 (Compile time hog in sink_clobbers)

2020-01-08  Richard Biener  <rguenther@suse.de>

PR middle-end/93199
* tree-eh.c (sink_clobbers): Update virtual operands for
the first and last stmt only.  Add a dry-run capability.
(pass_lower_eh_dispatch::execute): Perform clobber sinking
after CFG manipulations and in RPO order to catch all
secondary opportunities reliably.

From-SVN: r280006

4 years agore PR target/93182 ([avr] Add -nodevicespecs option.)
Georg-Johann Lay [Wed, 8 Jan 2020 14:28:56 +0000 (14:28 +0000)]
re PR target/93182 ([avr] Add -nodevicespecs option.)

PR target/93182
* doc/invoke.texi (AVR Options) <-nodevicespecs>: Document.

From-SVN: r280005

4 years agore PR other/92997 (gcc.dg/torture/ftrapv-1.c fails starting with r279523)
Richard Biener [Wed, 8 Jan 2020 14:07:55 +0000 (14:07 +0000)]
re PR other/92997 (gcc.dg/torture/ftrapv-1.c fails starting with r279523)

2020-01-08  Richard Biener  <rguenther@suse.de>

PR testsuite/92997
* gcc.dg/torture/ftrapv-1.c (iaddv): Use noipa attribute.

From-SVN: r280003

4 years ago* gcc/doc/install.texi: Typo.
Georg-Johann Lay [Wed, 8 Jan 2020 13:43:27 +0000 (13:43 +0000)]
* gcc/doc/install.texi: Typo.

From-SVN: r280002

4 years agore PR tree-optimization/93199 (Compile time hog in sink_clobbers)
Richard Biener [Wed, 8 Jan 2020 12:49:14 +0000 (12:49 +0000)]
re PR tree-optimization/93199 (Compile time hog in sink_clobbers)

2019-01-08  Richard Biener  <rguenther@suse.de>

PR middle-end/93199
c/
* gimple-parser.c (c_parser_parse_gimple_body): Remove __PHI IFN
permanently.

* gimple-fold.c (rewrite_to_defined_overflow): Mark stmt modified.
* tree-ssa-loop-im.c (move_computations_worker): Properly adjust
virtual operand, also updating SSA use.
* gimple-loop-interchange.cc (loop_cand::undo_simple_reduction):
Update stmt after resetting virtual operand.
(tree_loop_interchange::move_code_to_inner_loop): Likewise.

* gimple-iterator.c (gsi_remove): When not removing the stmt
permanently do not delink immediate uses or mark the stmt modified.

From-SVN: r280000

4 years agoReplace node->name/node->order with node->dump_name.
Martin Liska [Wed, 8 Jan 2020 11:58:49 +0000 (12:58 +0100)]
Replace node->name/node->order with node->dump_name.

2020-01-08  Martin Liska  <mliska@suse.cz>

* ipa-fnsummary.c (dump_ipa_call_summary): Use symtab_node::dump_name.
(ipa_call_context::estimate_size_and_time): Likewise.
(inline_analyze_function): Likewise.
2020-01-08  Martin Liska  <mliska@suse.cz>

* lto-partition.c (lto_balanced_map): Use symtab_node::dump_name.

From-SVN: r279999

4 years agoUse dump_asm_name for Callers/Calls in dump.
Martin Liska [Wed, 8 Jan 2020 11:58:30 +0000 (12:58 +0100)]
Use dump_asm_name for Callers/Calls in dump.

2020-01-08  Martin Liska  <mliska@suse.cz>

* cgraph.c (cgraph_node::dump): Use systematically
dump_asm_name.

From-SVN: r279998

4 years agoAdd -nodevicespecs option for avr.
Georg-Johann Lay [Wed, 8 Jan 2020 09:41:59 +0000 (09:41 +0000)]
Add -nodevicespecs option for avr.

gcc/
Add -nodevicespecs option for avr.

PR target/93182
* config/avr/avr.opt (-nodevicespecs): New driver option.
* config/avr/driver-avr.c (avr_devicespecs_file): Only issue
"-specs=device-specs/..." if that option is not set.
* doc/invoke.texi (AVR Options) <-nodevicespecs>: Document.

From-SVN: r279995

4 years agoImplement 64-bit double functions.
Georg-Johann Lay [Wed, 8 Jan 2020 09:31:07 +0000 (09:31 +0000)]
Implement 64-bit double functions.

gcc/
PR target/92055
* config.gcc (tm_defines) [target=avr]: Support --with-libf7,
--with-double-comparison.
* doc/install.texi: Document them.
* config/avr/avr-c.c (avr_cpu_cpp_builtins)
<WITH_LIBF7_LIBGCC, WITH_LIBF7_MATH, WITH_LIBF7_MATH_SYMBOLS>
<WITH_DOUBLE_COMPARISON>: New built-in defines.
* doc/invoke.texi (AVR Built-in Macros): Document them.
* config/avr/avr-protos.h (avr_float_lib_compare_returns_bool): New.
* config/avr/avr.c (avr_float_lib_compare_returns_bool): New function.
* config/avr/avr.h (FLOAT_LIB_COMPARE_RETURNS_BOOL): New macro.
libgcc/
PR target/92055
* config.host (tmake_file) [target=avr]: Add t-libf7,
t-libf7-math, t-libf7-math-symbols as specified by --with-libf7=.
* config/avr/t-avrlibc: Don't copy libgcc.a if there are modules
depending on sizeof (double) or sizeof (long double).
* config/avr/libf7: New folder.
libgcc/config/avr/libf7/
PR target/92055
* t-libf7: New file.
* t-libf7-math: New file.
* t-libf7-math-symbols: New file.
* libf7-common.mk: New file.
* libf7-asm-object.mk: New file.
* libf7-c-object.mk: New file.
* asm-defs.h: New file.
* libf7.h: New file.
* libf7.c: New file.
* libf7-asm.sx: New file.
* libf7-array.def: New file.
* libf7-const.def: New file.
* libf7-constdef.h: New file.
* f7renames.sh: New script.
* f7wraps.sh: New script.
* f7-renames.h: New generated file.
* f7-wraps.h: New generated file.

From-SVN: r279994

4 years agoarm: Fix rmprofile multilibs when architecture includes +mp or +sec (PR target/93188)
Richard Earnshaw [Wed, 8 Jan 2020 09:29:02 +0000 (09:29 +0000)]
arm: Fix rmprofile multilibs when architecture includes +mp or +sec (PR target/93188)

When only the rmprofile multilibs are built, compiling for armv7-a
should select the generic v7 multilibs.  This used to work before +sec
and +mp were added to the architecture options but it was broken by
that update.  This patch fixes those variants and adds some tests to
ensure that they remain fixed ;-)

PR target/93188
* config/arm/t-multilib (MULTILIB_MATCHES): Add rules to match
armv7-a{+mp,+sec,+mp+sec} to appropriate armv7 multilib variants
when only building rm-profile multilibs.

* gcc.target/arm/multilib.exp: Add new tests for rm-profile only.

From-SVN: r279993

4 years agowhitespace
Jason Merrill [Wed, 8 Jan 2020 04:03:38 +0000 (23:03 -0500)]
whitespace

From-SVN: r279989

4 years agoRename condition_variable_any wait* methods to match current draft standard
Thomas Rodgers [Wed, 8 Jan 2020 03:00:40 +0000 (03:00 +0000)]
Rename condition_variable_any wait* methods to match current draft standard

2020-01-07  Thomas Rodgers  <trodgers@redhat.com>

* include/std/condition_variable
(condition_variable_any::wait_on): Rename to match current draft
standard.
(condition_variable_any::wait_on_until): Likewise.
(condition_variable_any::wait_on_for): Likewise.
* testsuite/30_threads/condition_variable_any/stop_token/wait_on.cc:
Adjust tests to account for renamed methods.

From-SVN: r279988

4 years agoFind matched aggregate lattice for self-recursive CP (PR ipa/93084)
Feng Xue [Wed, 8 Jan 2020 02:55:00 +0000 (02:55 +0000)]
Find matched aggregate lattice for self-recursive CP (PR ipa/93084)

2020-01-08  Feng Xue  <fxue@os.amperecomputing.com>

        PR ipa/93084
        * ipa-cp.c (self_recursively_generated_p): Find matched aggregate
        lattice for a value to check.
        (propagate_vals_across_arith_jfunc): Add an assertion to ensure
        finite propagation in self-recursive scc.

2020-01-08  Feng Xue  <fxue@os.amperecomputing.com>

        PR ipa/93084
        * gcc.dg/ipa/ipa-clone-3.c: New test.

From-SVN: r279987

4 years agoPartially revert ipa-inline caller_growth_limits
Luo Xiong Hu [Wed, 8 Jan 2020 00:54:39 +0000 (00:54 +0000)]
Partially revert ipa-inline caller_growth_limits

We need to revert one line of code change from r279942 due to
performance degression.

gcc/ChangeLog:

2020-01-08  Luo Xiong Hu  <luoxhu@linux.ibm.com>

PR middle-end/93189
* ipa-inline.c (caller_growth_limits): Restore the AND.

From-SVN: r279986

4 years agocompiler: fix loopdepth tracking in array slicing expression in escape analysis
Ian Lance Taylor [Wed, 8 Jan 2020 00:38:00 +0000 (00:38 +0000)]
compiler: fix loopdepth tracking in array slicing expression in escape analysis

    In the gc compiler, for slicing an array, its AST has an implicit
    address operation node. There isn't such node in the gofrontend
    AST. During the escape analysis, we create a fake node to mimic
    the gc compiler's behavior. For the fake node, the loopdepth was
    not tracked correctly, causing miscompilation. Since this is an
    address operation, do the same thing as we do for the address
    operator.

    Fixes golang/go#36404.

    Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/213643

From-SVN: r279984

4 years agoDaily bump.
GCC Administrator [Wed, 8 Jan 2020 00:16:21 +0000 (00:16 +0000)]
Daily bump.

From-SVN: r279983

4 years agocompiler, runtime: stop using __go_runtime_error
Ian Lance Taylor [Tue, 7 Jan 2020 23:13:24 +0000 (23:13 +0000)]
compiler, runtime: stop using __go_runtime_error

    Use specific panic functions instead, which are mostly already in the
    runtime package.

    Also correct "defer nil" to panic when we execute the defer, rather
    than throw when we queue it.

    Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/213642

From-SVN: r279979

4 years agoRevert patch accidentily created on the wrong sandbox
Michael Meissner [Tue, 7 Jan 2020 21:30:43 +0000 (21:30 +0000)]
Revert patch accidentily created on the wrong sandbox

From-SVN: r279973

4 years agoRestore patch reverted on trunk instead of a branch
Michael Meissner [Tue, 7 Jan 2020 21:29:11 +0000 (21:29 +0000)]
Restore patch reverted on trunk instead of a branch

From-SVN: r279972

4 years agoRevert a patch from luoxhu@linux.ibm.com
Michael Meissner [Tue, 7 Jan 2020 21:27:27 +0000 (21:27 +0000)]
Revert a patch from luoxhu@linux.ibm.com

From-SVN: r279971

4 years agoPR libstdc++/92124 fix incorrect container move assignment
François Dumont [Tue, 7 Jan 2020 21:01:37 +0000 (21:01 +0000)]
PR libstdc++/92124 fix incorrect container move assignment

* include/bits/stl_tree.h
(_Rb_tree<>::_M_move_assign(_Rb_tree&, false_type)): Replace
std::move_if_noexcept by std::move.
* testsuite/23_containers/map/92124.cc: New.
* testsuite/23_containers/set/92124.cc: New.

From-SVN: r279967

4 years agoinit.c (build_new): Add location_t parameter and use it throughout.
Paolo Carlini [Tue, 7 Jan 2020 17:58:18 +0000 (17:58 +0000)]
init.c (build_new): Add location_t parameter and use it throughout.

/gcc/cp
2020-01-07  Paolo Carlini  <paolo.carlini@oracle.com>

* init.c (build_new): Add location_t parameter and use it throughout.
(build_raw_new_expr): Likewise.
* parser.c (cp_parser_new_expression): Pass the combined_loc.
* pt.c (tsubst_copy_and_build): Adjust call.
* cp-tree.h: Update declarations.

/libcc1
2020-01-07  Paolo Carlini  <paolo.carlini@oracle.com>

* libcp1plugin.cc (plugin_build_new_expr): Update build_new call.

/gcc/testsuite
2020-01-07  Paolo Carlini  <paolo.carlini@oracle.com>

* g++.old-deja/g++.bugs/900208_03.C: Check locations too.
* g++.old-deja/g++.bugs/900519_06.C: Likewise.

From-SVN: r279963

4 years agocompiler: avoid write barrier for a[i] = a[i][:v]
Ian Lance Taylor [Tue, 7 Jan 2020 15:35:04 +0000 (15:35 +0000)]
compiler: avoid write barrier for a[i] = a[i][:v]

    This avoids generating a write barrier for code that appears in the
    Go1.14beta1 runtime package in (*pageAlloc).sysGrow:
        s.summary[l] = s.summary[l][:needIdxLimit]

    Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/213558

From-SVN: r279962

4 years ago[amdgcn] Add more modes for vector comparisons
Andrew Stubbs [Tue, 7 Jan 2020 15:27:50 +0000 (15:27 +0000)]
[amdgcn] Add more modes for vector comparisons

2020-01-07  Andrew Stubbs  <ams@codesourcery.com>

gcc/
* config/gcn/gcn-valu.md (VEC_1REG_INT_ALT): Delete iterator.
(VEC_ALLREG_ALT): New iterator.
(VEC_ALLREG_INT_MODE): New iterator.
(VCMP_MODE): New iterator.
(VCMP_MODE_INT): New iterator.
(vec_cmpu<mode>di): Use VCMP_MODE_INT.
(vec_cmp<u>v64qidi): New define_expand.
(vec_cmp<mode>di_exec): Use VCMP_MODE.
(vec_cmpu<mode>di_exec): New define_expand.
(vec_cmp<u>v64qidi_exec): New define_expand.
(vec_cmp<mode>di_dup): Use VCMP_MODE.
(vec_cmp<mode>di_dup_exec): Use VCMP_MODE.
(vcond<VEC_ALL1REG_MODE:mode><VEC_1REG_ALT:mode>): Rename ...
(vcond<VEC_ALLREG_MODE:mode><VEC_ALLREG_ALT:mode>): ... to this.
(vcond<VEC_ALL1REG_MODE:mode><VEC_1REG_ALT:mode>_exec): Rename ...
(vcond<VEC_ALLREG_MODE:mode><VEC_ALLREG_ALT:mode>_exec): ... to this.
(vcondu<VEC_ALL1REG_MODE:mode><VEC_1REG_INT_ALT:mode>): Rename ...
(vcondu<VEC_ALLREG_MODE:mode><VEC_ALLREG_INT_MODE:mode>): ... to this.
(vcondu<VEC_ALL1REG_MODE:mode><VEC_1REG_INT_ALT:mode>_exec): Rename ...
(vcondu<VEC_ALLREG_MODE:mode><VEC_ALLREG_INT_MODE:mode>_exec): ... to
this.
* config/gcn/gcn.c (print_operand): Fix 8 and 16 bit suffixes.
* config/gcn/gcn.md (expander): Add sign_extend and zero_extend.

From-SVN: r279961

4 years agoPR c++/47877 - -fvisibility-inlines-hidden and member templates.
Jason Merrill [Tue, 7 Jan 2020 15:05:25 +0000 (10:05 -0500)]
PR c++/47877 - -fvisibility-inlines-hidden and member templates.

DECL_VISIBILITY_SPECIFIED is also true if an enclosing scope has explicit
visibility, and we don't want that to override -fvisibility-inlines-hidden.
So check for the attribute specifically on the function, like we already do
for template argument visibility restriction.

* decl2.c (determine_visibility): -fvisibility-inlines-hidden beats
explicit class visibility for a template.

From-SVN: r279960

4 years agoDisallow 'B' constraints on amdgcn addc/subb
Andrew Stubbs [Tue, 7 Jan 2020 14:35:21 +0000 (14:35 +0000)]
Disallow 'B' constraints on amdgcn addc/subb

2020-01-07  Andrew Stubbs  <ams@codesourcery.com>

gcc/
* config/gcn/constraints.md (DA): Update description and match.
(DB): Likewise.
(Db): New constraint.
* config/gcn/gcn-protos.h (gcn_inline_constant64_p): Add second
parameter.
* config/gcn/gcn.c (gcn_inline_constant64_p): Add 'mixed' parameter.
Implement 'Db' mixed immediate type.
* config/gcn/gcn-valu.md (addcv64si3<exec_vcc>): Rework constraints.
(addcv64si3_dup<exec_vcc>): Delete.
(subcv64si3<exec_vcc>): Rework constraints.
(addv64di3): Rework constraints.
(addv64di3_exec): Rework constraints.
(subv64di3): Rework constraints.
(addv64di3_dup): Delete.
(addv64di3_dup_exec): Delete.
(addv64di3_zext): Rework constraints.
(addv64di3_zext_exec): Rework constraints.
(addv64di3_zext_dup): Rework constraints.
(addv64di3_zext_dup_exec): Rework constraints.
(addv64di3_zext_dup2): Rework constraints.
(addv64di3_zext_dup2_exec): Rework constraints.
(addv64di3_sext_dup2): Rework constraints.
(addv64di3_sext_dup2_exec): Rework constraints.

From-SVN: r279959

4 years ago[testsuite][arm] xfail vect-epilogues for armbe
Andre Vieira [Tue, 7 Jan 2020 14:14:16 +0000 (14:14 +0000)]
[testsuite][arm] xfail vect-epilogues for armbe

gcc/testsuite/ChangeLog:
2020-01-07  Andre Vieira  <andre.simoesdiasvieira@arm.com>

* gcc.dg/vect/vect-epilogues.c: XFAIL for arm big endian.

From-SVN: r279958

4 years ago[doc] Add missing documentation for existing target checks
Andre Vieira [Tue, 7 Jan 2020 14:11:57 +0000 (14:11 +0000)]
[doc] Add missing documentation for existing target checks

gcc/ChangeLog:
2020-01-07  Andre Vieira  <andre.simoesdiasvieira@arm.com>

* doc/sourcebuild.texi (arm_little_endian, arm_nothumb): Documented
existing target checks.

From-SVN: r279957

4 years agocompiler: avoid a couple of compiler crashes
Ian Lance Taylor [Tue, 7 Jan 2020 13:44:29 +0000 (13:44 +0000)]
compiler: avoid a couple of compiler crashes

    These came up while building 1.14beta1 while the code was still invalid.
    The policy is to not bother committing invalid test cases that cause
    compiler crashes.

    Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/213537

From-SVN: r279956

4 years agoinstall.texi: Bump minimal supported MPC version.
Richard Biener [Tue, 7 Jan 2020 12:39:00 +0000 (12:39 +0000)]
install.texi: Bump minimal supported MPC version.

2020-01-07  Richard Biener  <rguenther@suse.de>

* doc/install.texi: Bump minimal supported MPC version.

From-SVN: r279955

4 years agoAdd a generic lhd_simulate_enum_decl
Richard Sandiford [Tue, 7 Jan 2020 10:21:26 +0000 (10:21 +0000)]
Add a generic lhd_simulate_enum_decl

Normally we only create SVE ACLE functions when arm_sve.h is included.
But for LTO we need to do it at start-up, so that the functions are
already defined when streaming in the LTO objects.

One hitch with doing that is that LTO doesn't yet implement the
simulate_enum_decl langhook.  This patch adds a simple default
implementation that it can use.

2020-01-07  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* langhooks-def.h (lhd_simulate_enum_decl): Declare.
(LANG_HOOKS_SIMULATE_ENUM_DECL): Use it.
* langhooks.c: Include stor-layout.h.
(lhd_simulate_enum_decl): New function.
* config/aarch64/aarch64-sve-builtins.cc (init_builtins): Call
handle_arm_sve_h for the LTO frontend.
(register_vector_type): Cope with null returns from pushdecl.

gcc/testsuite/
* gcc.target/aarch64/sve/pcs/asm_4.c: New test.

From-SVN: r279954

4 years ago[AArch64] Use type attributes to mark types that use the SVE PCS
Richard Sandiford [Tue, 7 Jan 2020 10:18:14 +0000 (10:18 +0000)]
[AArch64] Use type attributes to mark types that use the SVE PCS

The SVE port needs to maintain a different type identity for
GNU vectors and "SVE vectors", since the types use different ABIs.
Until now we've done that using pointer equality between the
TYPE_MAIN_VARIANT and the built-in SVE type.

However, as Richard B noted, that doesn't work well for LTO,
where we stream both GNU and SVE types from a file instead of
creating them directly.  We need a mechanism for distinguishing
the types using streamed type information.

This patch does that using a new type attribute.  This attribute
is only meant to be used for the built-in SVE types and shouldn't
be user-visible.  The patch tries to ensure this by including a space
in the attribute name, like we already do for things like "fn spec"
and "omp declare simd".

2020-01-07  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* config/aarch64/aarch64-protos.h (aarch64_sve::svbool_type_p)
(aarch64_sve::nvectors_if_data_type): Replace with...
(aarch64_sve::builtin_type_p): ...this.
* config/aarch64/aarch64-sve-builtins.cc: Include attribs.h.
(find_vector_type): Delete.
(add_sve_type_attribute): New function.
(lookup_sve_type_attribute): Likewise.
(register_builtin_types): Add an "SVE type" attribute to each type.
(register_tuple_type): Likewise.
(svbool_type_p, nvectors_if_data_type): Delete.
(mangle_builtin_type): Use lookup_sve_type_attribute.
(builtin_type_p): Likewise.  Add an overload that returns the
number of constituent vector and predicate registers.
* config/aarch64/aarch64.c (aarch64_sve_argument_p): Delete.
(aarch64_returns_value_in_sve_regs_p): Use aarch64_sve::builtin_type_p
instead of aarch64_sve_argument_p.
(aarch64_takes_arguments_in_sve_regs_p): Likewise.
(aarch64_pass_by_reference): Likewise.
(aarch64_function_value_1): Likewise.
(aarch64_return_in_memory): Likewise.
(aarch64_layout_arg): Likewise.

gcc/testsuite/
* g++.target/aarch64/sve/acle/general-c++/mangle_5.C: New test.
* gcc.target/aarch64/sve/pcs/asm_1.c: Likewise.
* gcc.target/aarch64/sve/pcs/asm_2.c: Likewise.
* gcc.target/aarch64/sve/pcs/asm_3.c: Likewise.

From-SVN: r279953

4 years agoDon't mangle attributes that have a space in their name
Richard Sandiford [Tue, 7 Jan 2020 10:15:43 +0000 (10:15 +0000)]
Don't mangle attributes that have a space in their name

The SVE port needs to maintain a different type identity for
GNU vectors and "SVE vectors" even during LTO, since the types
use different ABIs.  The easiest way of doing that seemed to be
to use type attributes.  However, these type attributes shouldn't
be user-facing; they're just a convenient way of representing the
types internally in GCC.

There are already several internal-only attributes, such as "fn spec"
and "omp declare simd".  They're distinguished from normal user-facing
attributes by having a space in their name, which means that it isn't
possible to write them directly in C or C++.

Taking the same approach mostly works well for SVE.  The only snag
I've hit so far is that the new attribute needs to (and only exists to)
affect type identity.  This means that it would normally get included
in mangled names, to distinguish it from types without the attribute.

However, the SVE ABI specifies a separate mangling for SVE vector types,
rather than using an attribute mangling + a normal vector mangling.
So we need some way of suppressing the attribute mangling for this case.

There are currently no other target-independent or target-specific
internal-only attributes that affect type identity, so this patch goes
for the simplest fix of skipping mangling for attributes whose names
contain a space (which usually wouldn't give a valid symbol anyway).
Other options I thought about were:

(1) Also make sure that targetm.mangled_type returns nonnull.

(2) Check directly for the target-specific name.

(3) Add a new target hook.

(4) Add new information to attribute_spec.  This would be very invasive
    at this stage, but maybe we should consider replacing all the boolean
    fields with flags?  That should make the tables slightly easier to
    read and would make adding new flags much simpler in future.

2020-01-07  Richard Sandiford  <richard.sandiford@arm.com>

gcc/cp/
* mangle.c (mangle_type_attribute_p): New function, split out from...
(write_CV_qualifiers_for_type): ...here.  Don't mangle attributes
that contain a space.

From-SVN: r279952

4 years agore PR tree-optimization/93156 (abused nonnull attribute evokes new segfault in gcc...
Jakub Jelinek [Tue, 7 Jan 2020 10:05:14 +0000 (11:05 +0100)]
re PR tree-optimization/93156 (abused nonnull attribute evokes new segfault in gcc 10 since Nov 4 commit, 0fb958ab8aa)

PR tree-optimization/93156
* tree-ssa-ccp.c (bit_value_binop): For x * x note that the second
least significant bit is always clear.

* gcc.dg/tree-ssa/pr93156.c: New test.

From-SVN: r279951

4 years agore PR tree-optimization/93118 (>>32<<32 is not always converted into &~0ffffffffull...
Jakub Jelinek [Tue, 7 Jan 2020 10:03:07 +0000 (11:03 +0100)]
re PR tree-optimization/93118 (>>32<<32 is not always converted into &~0ffffffffull at the tree level)

PR tree-optimization/93118
* match.pd ((x >> c) << c -> x & (-1<<c)): Add nop_convert?.  Add new
simplifier with two intermediate conversions.

* gcc.dg/tree-ssa/pr93118.c: New test.

From-SVN: r279950

4 years agoAdd Optimization keyword for TREE/RTL optimization passes.
Martin Liska [Tue, 7 Jan 2020 09:21:01 +0000 (10:21 +0100)]
Add Optimization keyword for TREE/RTL optimization passes.

2020-01-07  Martin Liska  <mliska@suse.cz>

* params.opt: Add Optimization for various parameters.

From-SVN: r279949

4 years agoDocument cloning for the target_clone attribute.
Martin Liska [Tue, 7 Jan 2020 09:18:46 +0000 (10:18 +0100)]
Document cloning for the target_clone attribute.

2020-01-07  Martin Liska  <mliska@suse.cz>

PR ipa/83411
* doc/extend.texi: Explain cloning for target_clone
attribute.

From-SVN: r279948

4 years agoMake warn_inline Optimization option.
Martin Liska [Tue, 7 Jan 2020 09:15:38 +0000 (10:15 +0100)]
Make warn_inline Optimization option.

2020-01-07  Martin Liska  <mliska@suse.cz>

PR tree-optimization/92860
* common.opt: Make in Optimization option
as it is affected by -O0, which is an Optimization
option.
* tree-inline.c (tree_inlinable_function_p):
Use opt_for_fn for warn_inline.
(expand_call_inline): Likewise.
2020-01-07  Martin Liska  <mliska@suse.cz>

PR tree-optimization/92860
* gcc.dg/pr92860-2.c: New test.

From-SVN: r279947

4 years agoMark -free as Optimization option.
Martin Liska [Tue, 7 Jan 2020 09:12:35 +0000 (10:12 +0100)]
Mark -free as Optimization option.

From-SVN: r279946

4 years agoMark param_min_crossjump_insns with Optimization keyword.
Martin Liska [Tue, 7 Jan 2020 09:10:37 +0000 (10:10 +0100)]
Mark param_min_crossjump_insns with Optimization keyword.

2020-01-07  Martin Liska  <mliska@suse.cz>

    PR optimization/92860
    * params.opt: Mark param_min_crossjump_insns with Optimization
    keyword.

From-SVN: r279945

4 years agore PR fortran/93162 (gcc/fortran/trans-openmp.c:2469:50: runtime error: load of value...
Jakub Jelinek [Tue, 7 Jan 2020 07:14:41 +0000 (08:14 +0100)]
re PR fortran/93162 (gcc/fortran/trans-openmp.c:2469:50: runtime error: load of value 145992800, which is not a valid value for type 'ar_type' since r279628)

PR fortran/93162
* trans-openmp.c (gfc_trans_omp_clauses): Check for REF_ARRAY type
before testing u.ar.type == AR_FULL.

From-SVN: r279944

4 years agore PR c++/91369 (Implement P0784R7: constexpr new)
Jakub Jelinek [Tue, 7 Jan 2020 07:13:50 +0000 (08:13 +0100)]
re PR c++/91369 (Implement P0784R7: constexpr new)

PR c++/91369
* constexpr.c (struct constexpr_global_ctx): Add heap_alloc_count
member, initialize it to zero in ctor.
(cxx_eval_call_expression): Bump heap_dealloc_count when deleting
a heap object.  Don't cache calls to functions which allocate some
heap objects and don't deallocate them or deallocate some heap
objects they didn't allocate.

* g++.dg/cpp1y/constexpr-new.C: Expect an error explaining why
static_assert failed for C++2a.
* g++.dg/cpp2a/constexpr-new9.C: New test.

From-SVN: r279943

4 years agoipa-inline: Adjust condition for caller_growth_limits
Luo Xiong Hu [Tue, 7 Jan 2020 02:38:16 +0000 (02:38 +0000)]
ipa-inline: Adjust condition for caller_growth_limits

Inline should return failure either (newsize > param_large_function_insns)
OR (newsize > limit).  Sometimes newsize is larger than
param_large_function_insns, but smaller than limit, inline doesn't return
failure even if the new function is a large function.
Therefore, param_large_function_insns and param_large_function_growth should be
OR instead of AND, otherwise --param large-function-growth won't
work correctly with --param large-function-insns.

gcc/ChangeLog:

2020-01-07  Luo Xiong Hu  <luoxhu@linux.ibm.com>

* ipa-inline-analysis.c (estimate_growth): Fix typo.
* ipa-inline.c (caller_growth_limits): Use OR instead of AND.

From-SVN: r279942

4 years agoRefactor some code for a future change.
Michael Meissner [Tue, 7 Jan 2020 01:47:22 +0000 (01:47 +0000)]
Refactor some code for a future change.

2020-01-06  Michael Meissner  <meissner@linux.ibm.com>

* config/rs6000/rs6000.c (hard_reg_and_mode_to_addr_mask): New
helper function to return the valid addressing formats for a given
hard register and mode.
(rs6000_adjust_vec_address): Call hard_reg_and_mode_to_addr_mask.

Index: gcc/config/rs6000/rs6000.c
===================================================================
--- gcc/config/rs6000/rs6000.c (revision 279912)
+++ gcc/config/rs6000/rs6000.c (working copy)
@@ -6729,6 +6729,30 @@ rs6000_expand_vector_extract (rtx target
     }
 }

+/* Helper function to return an address mask based on a physical register.  */
+
+static addr_mask_type
+hard_reg_and_mode_to_addr_mask (rtx reg, machine_mode mode)
+{
+  unsigned int r = reg_or_subregno (reg);
+  addr_mask_type addr_mask;
+
+  gcc_assert (HARD_REGISTER_NUM_P (r));
+  if (INT_REGNO_P (r))
+    addr_mask = reg_addr[mode].addr_mask[RELOAD_REG_GPR];
+
+  else if (FP_REGNO_P (r))
+    addr_mask = reg_addr[mode].addr_mask[RELOAD_REG_FPR];
+
+  else if (ALTIVEC_REGNO_P (r))
+    addr_mask = reg_addr[mode].addr_mask[RELOAD_REG_VMX];
+
+  else
+    gcc_unreachable ();
+
+  return addr_mask;
+}
+
 /* Adjust a memory address (MEM) of a vector type to point to a scalar field
    within the vector (ELEMENT) with a mode (SCALAR_MODE).  Use a base register
    temporary (BASE_TMP) to fixup the address.  Return the new memory address
@@ -6865,21 +6889,8 @@ rs6000_adjust_vec_address (rtx scalar_re
   if (GET_CODE (new_addr) == PLUS)
     {
       rtx op1 = XEXP (new_addr, 1);
-      addr_mask_type addr_mask;
-      unsigned int scalar_regno = reg_or_subregno (scalar_reg);
-
-      gcc_assert (HARD_REGISTER_NUM_P (scalar_regno));
-      if (INT_REGNO_P (scalar_regno))
- addr_mask = reg_addr[scalar_mode].addr_mask[RELOAD_REG_GPR];
-
-      else if (FP_REGNO_P (scalar_regno))
- addr_mask = reg_addr[scalar_mode].addr_mask[RELOAD_REG_FPR];
-
-      else if (ALTIVEC_REGNO_P (scalar_regno))
- addr_mask = reg_addr[scalar_mode].addr_mask[RELOAD_REG_VMX];
-
-      else
- gcc_unreachable ();
+      addr_mask_type addr_mask
+ = hard_reg_and_mode_to_addr_mask (scalar_reg, scalar_mode);

       if (REG_P (op1) || SUBREG_P (op1))
  valid_addr_p = (addr_mask & RELOAD_REG_INDEXED) != 0;

From-SVN: r279941

4 years agoUpdate ChangeLog for last change
Michael Meissner [Tue, 7 Jan 2020 01:37:04 +0000 (01:37 +0000)]
Update ChangeLog for last change

From-SVN: r279940

4 years agoUpdate 'Q' constraint documentation.
Michael Meissner [Tue, 7 Jan 2020 01:36:17 +0000 (01:36 +0000)]
Update 'Q' constraint documentation.

2020-01-06  Michael Meissner  <meissner@linux.ibm.com>

* config/rs6000/constraints.md (Q constraint): Update
documentation.
* doc/md.texi (RS/6000 constraints): Update 'Q' cosntraint
documentation.

From-SVN: r279939

4 years agoFix bad code of vector extract of PC-relative address with variable element #.
Michael Meissner [Tue, 7 Jan 2020 01:34:19 +0000 (01:34 +0000)]
Fix bad code of vector extract of PC-relative address with variable element #.

2020-01-06  Michael Meissner  <meissner@linux.ibm.com>

* config/rs6000/vsx.md (vsx_extract_<mode>_var, VSX_D iterator):
Use 'Q' for doing vector extract from memory.
(vsx_extract_v4sf_var): Use 'Q' for doing vector extract from
memory.
(vsx_extract_<mode>_var, VSX_EXTRACT_I iterator): Use 'Q' for
doing vector extract from memory.
(vsx_extract_<mode>_<VS_scalar>mode_var): Use 'Q' for doing vector
extract from memory.

From-SVN: r279938

4 years agoAdd support for large prefixed address in adjusting a vector address.
Michael Meissner [Tue, 7 Jan 2020 01:29:12 +0000 (01:29 +0000)]
Add support for large prefixed address in adjusting a vector address.

2020-01-06  Michael Meissner  <meissner@linux.ibm.com>

* config/rs6000/rs6000.c (rs6000_adjust_vec_address): Add support
for the offset being 34-bits when -mcpu=future is used.

From-SVN: r279937

4 years agoPR c++/92552 - ICE with inherited constrained default ctor.
Jason Merrill [Tue, 7 Jan 2020 01:07:59 +0000 (20:07 -0500)]
PR c++/92552 - ICE with inherited constrained default ctor.

We set TYPE_HAS_USER_CONSTRUCTOR on the template type in lookup_using_decl,
but we didn't copy it to the instantiation.  Setting it in
one_inherited_ctor is too late, as that gets called after we decide whether
to set CLASSTYPE_LAZY_DEFAULT_CTOR.  This change affects other testcases as
well; the changes are fixes for the other inherited constructor tests as
well.

* pt.c (instantiate_class_template_1): Copy
TYPE_HAS_USER_CONSTRUCTOR.
* class.c (one_inherited_ctor): Don't set it here.

From-SVN: r279936

4 years agoPR c++/92739 - parsing requires clause with attributes.
Andrew Sutton [Tue, 7 Jan 2020 01:02:06 +0000 (01:02 +0000)]
PR c++/92739 - parsing requires clause with attributes.

gcc/cp/
* parser.c (cp_parser_constraint_requires_parens): Exclude
attributes as postfix expressions.

gcc/testsuite/
* g++.dg/concepts-pr92739.C: New test.

From-SVN: r279935

4 years agoDaily bump.
GCC Administrator [Tue, 7 Jan 2020 00:16:13 +0000 (00:16 +0000)]
Daily bump.

From-SVN: r279932

4 years agopa.md: Revert change to use ordered_comparison_operator instead of...
John David Anglin [Mon, 6 Jan 2020 23:48:42 +0000 (23:48 +0000)]
pa.md: Revert change to use ordered_comparison_operator instead of...

* config/pa/pa.md: Revert change to use ordered_comparison_operator
instead of cmpib_comparison_operator in cmpib patterns.
* config/pa/predicates.md (cmpib_comparison_operator): Revert removal
of cmpib_comparison_operator.  Revise comment.

From-SVN: r279927

4 years agoRequire equal shift amounts for IFN_DIV_POW2
Richard Sandiford [Mon, 6 Jan 2020 18:00:15 +0000 (18:00 +0000)]
Require equal shift amounts for IFN_DIV_POW2

IFN_DIV_POW2 currently requires all elements to be shifted by the
same amount, in a similar way as for WIDEN_LSHIFT_EXPR.  This patch
enforces that when building the SLP tree.

If in future targets want to support IFN_DIV_POW2 without this
restriction, we'll probably need the kind of vector-vector/
vector-scalar split that we already have for normal shifts.

2020-01-06  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* tree-vect-slp.c (vect_build_slp_tree_1): Require all shifts
in an IFN_DIV_POW2 node to be equal.

gcc/testsuite/
* gcc.target/aarch64/sve/asrdiv_1.c: Remove trailing %s.
* gcc.target/aarch64/sve/asrdiv_2.c: New test.
* gcc.target/aarch64/sve/asrdiv_3.c: Likewise.

From-SVN: r279908

4 years agoCheck mask argument's type when vectorising conditional functions
Richard Sandiford [Mon, 6 Jan 2020 17:58:57 +0000 (17:58 +0000)]
Check mask argument's type when vectorising conditional functions

We can't yet vectorise conditional internal functions whose boolean
condition is fed by a data access (or more generally, by a tree of logic
ops in which all the leaves are data accesses).  Although we should add
that eventually, we'd need further work to generate good-quality code.

Unlike vectorizable_load and vectorizalbe_store, vectorizable_call
wasn't checking whether the mask had a suitable type, leading to an
ICE on the testcases.

2020-01-06  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* tree-vect-stmts.c (vect_check_load_store_mask): Rename to...
(vect_check_scalar_mask): ...this.
(vectorizable_store, vectorizable_load): Update call accordingly.
(vectorizable_call): Use vect_check_scalar_mask to check the mask
argument in calls to conditional internal functions.

gcc/testsuite/
* gcc.dg/vect/vect-cond-arith-8.c: New test.
* gcc.target/aarch64/sve/cond_fmul_5.c: Likewise.

From-SVN: r279907

4 years agoFix amdgcn issue with '0' constraints
Andrew Stubbs [Mon, 6 Jan 2020 17:10:40 +0000 (17:10 +0000)]
Fix amdgcn issue with '0' constraints

2020-01-06  Andrew Stubbs  <ams@codesourcery.com>

gcc/
* config/gcn/gcn-valu.md (subv64di3): Use separate alternatives for
'0' matching inputs.
(subv64di3_exec): Likewise.

From-SVN: r279906

4 years agomips.c (vr4130_align_insns): Fix typo.
Bryan Stenson [Mon, 6 Jan 2020 16:15:04 +0000 (16:15 +0000)]
mips.c (vr4130_align_insns): Fix typo.

2020-01-06  Bryan Stenson  <bryan@siliconvortex.com>

* config/mips/mips.c (vr4130_align_insns): Fix typo.
* doc/md.texi (movstr): Likewise.

From-SVN: r279905

4 years agoFix early-clobber in amdgcn vec_extract
Andrew Stubbs [Mon, 6 Jan 2020 15:40:01 +0000 (15:40 +0000)]
Fix early-clobber in amdgcn vec_extract

2020-01-06  Andrew Stubbs  <ams@codesourcery.com>

gcc/
* config/gcn/gcn-valu.md (vec_extract<mode><scalar_mode>): Add early
clobber.

From-SVN: r279904

4 years agoPR c++/79592 adjust testcase
Nathan Sidwell [Mon, 6 Jan 2020 15:22:02 +0000 (15:22 +0000)]
PR c++/79592 adjust testcase

https://gcc.gnu.org/ml/gcc-patches/2020-01/msg00127.html
* g++.dg/ubsan/vptr-4.C: Add expected error.

From-SVN: r279902

4 years ago[AArch64] Use move-if-change for aarch64-tune.md
Richard Sandiford [Mon, 6 Jan 2020 13:01:48 +0000 (13:01 +0000)]
[AArch64] Use move-if-change for aarch64-tune.md

If aarch64-tune.md was older than gentune.sh or aarch64-cores.def,
we'd try to overwrite it even if the current contents were correct.
This could cause problems with read-only source directories and
could cause spurious copying for rsync --archive.

2020-01-06  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* config/aarch64/t-aarch64 ($(srcdir)/config/aarch64/aarch64-tune.md):
Depend on...
(s-aarch64-tune-md): ...this new stamp file.  Pipe the new contents
to a temporary file and use move-if-change to update the real
file where necessary.

From-SVN: r279900

4 years ago[AArch64] Fix constraints for CPY /M
Richard Sandiford [Mon, 6 Jan 2020 13:00:04 +0000 (13:00 +0000)]
[AArch64] Fix constraints for CPY /M

The constraints for CPY /M allowed p0-p15 instead of the intended p0-p7.
This looks like a pasto from the preceding constant pattern, where p0-p15
is allowed.

2020-01-06  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* config/aarch64/aarch64-sve.md (@aarch64_sel_dup<mode>): Use Upl
rather than Upa for CPY /M.

gcc/testsuite/
* gcc.target/aarch64/sve/acle/general/cpy_1.c: New test.

From-SVN: r279899

4 years agoFix amdgcn inline immediate range
Andrew Stubbs [Mon, 6 Jan 2020 12:22:21 +0000 (12:22 +0000)]
Fix amdgcn inline immediate range

2020-01-06  Andrew Stubbs  <ams@codesourcery.com>

gcc/
* config/gcn/gcn.c (gcn_inline_constant_p): Allow 64 as an inline
immediate.

From-SVN: r279898