package/rustc: add support for Tier 1 and Tier 2 platforms

This commit reworks how BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS is
defined to more clearly map with the list of platforms supported by
Rust as listed at
https://doc.rust-lang.org/nightly/rustc/platform-support.html. Indeed,
the situation is not as simple as a list of architectures, all
supported for both glibc and musl.

So instead, we take the approach of directly mapping with what's
described at
https://doc.rust-lang.org/nightly/rustc/platform-support.html, which
means:

 * A list of Tier 1 platforms (in fact just 3 platforms)

 * A list of Tier 2 platforms with host tools (i.e where rustc and
   cargo themselves are available for the target, something that isn't
   relevant for Buildroot)

 * A list of Tier 2 platforms with no host tools support.

For each platform, we add as a comment its Rust tuple name, as listed
at https://doc.rust-lang.org/nightly/rustc/platform-support.html, and
then the corresponding Buildroot architecture/libc dependency.

This is obviously more verbose than it was, but it is also a lot
easier to maintain.

With this, a total of 16 new platforms are supported, 13 of which are
musl-based. The additional non-musl platforms are ARMv5TE, RISC-V
64-bit and Sparc64.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/rustc: prepare for musl-based platforms support

The current rustc package only supports configurations based on glibc
and hardcodes this requirement. This patch prepares the addition of
support for musl-based platforms by using $(LIBC) instead of
hardcoding "gnu" as the C library specifier when defining
RUSTC_TARGET_NAME.

Signed-off-by: Nathaniel Husted <nathaniel.husted@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/abootimg: Update to 1ebeb39, switch to ajs124

ajs124 [1] has 2 fixes over than original [2].

[1] https://gitlab.com/ajs124/abootimg
[2] https://github.com/ggrandou/abootimg.

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
[yann.morin.1998@free.fr: also change homepage in Config.in]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/ltp-testsuite: enable ebizzy

ebizzy has been fixed in 20200930 (commit 967612c45).

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/imlib2: bump version to 1.7.1

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/numactl: add -latomic to numa.pc

Instead of passing -latomic through LDFLAGS as done in commit
4ed540ddf59bec4b389be44d7f42820d2466904f, properly check for it in
configure.ac and add it to numa.pc or numactl users won't be able to get
it

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/gobject-introspection/Config.in: Allow RISCV_32 builds

Qemu 6.0.0 no longer segfaults when running qemu-riscv32. As such, it's now
possible to allow riscv32 to compile gobject-introspection.

This partially reverts commit c94a212390e33c122cf9db4c772caf8bf3804565.
The symbol BR2_PACKAGE_GOBJECT_INTROSPECTION_ARCH_SUPPORTS is kept, even
though it is now equivalent to BR2_PACKAGE_HOST_QEMU_ARCH_SUPPORTS,
because it's likely that architecture dependencies will pop up again in
the future.

The configuration of a previously failing autobuilder [1] now passes.

[1] http://autobuild.buildroot.org/results/668397b1df42297505e6fc8353c4752290a5628d

Signed-off-by: Adam Duskett <aduskett@rivian.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/qemu: bump version to 6.0.0

Other changes:
  - Drop patch 0003-hw-usb-host-libusb.c-fix-build-with-kernel-5.0.patch as it
    is part of 6.0.0.
  - Rename 0004-meson-add-tests-option.patch to
    0003-meson-add-tests-option.patch and refresh it for 6.0.0

Signed-off-by: Adam Duskett <aduskett@rivian.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/x11r7/xlib_libXfixes: bump version to 6.0.0

Release notes:
https://lists.x.org/archives/xorg-announce/2021-May/003086.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/mesa3d: bump version to 21.1.0

Removed kmsro-related options, these are now handled by the build
system:
https://cgit.freedesktop.org/mesa/mesa/commit/?id=70813c1c13b99cb029c8fa3537163650bdd17b6d

Updated license hash due to typo fix in upstream commit:
https://cgit.freedesktop.org/mesa/mesa/commit/?id=2f42c21221cf89f738225e3ac2aa2e85953c1dc1

Rebased patch 0003 due to upstream commit:
https://cgit.freedesktop.org/mesa/mesa/commit/?id=a9618e7c4214e29c97009870ad8904623746ffe9

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/openblas: install static library even if BR2_STATIC_LIBS is not set

openblas has options 'NO_STATIC' and 'NO_SHARED' to steer the installation
of libopenblas.a and libopenblas.so. But this does not impact anything in
the build process, other than copying the respective file to the output
directory.

As openblas is very large (e.g. 3MB on ARM) but applications may only use a
small part of it, such applications may want to link statically with
openblas, even though the global BR2_STATIC_LIBS is not set and not desired.

One approach would have been to introduce options
BR2_PACKAGE_OPENBLAS_BUILD_SHARED_LIB and
BR2_PACKAGE_OPENBLAS_BUILD_STATIC_LIB which could be freely selected
regardless of BR2_STATIC_LIBS / BR2_SHARED_LIBS.

But since the installation of a static library does not have any negative
impact except for some disk space on the host system (.a files are removed
from the target in target-finalize anyway), change the installation rules to
install the static library unconditionally.

NO_SHARED is still passed for static-libs-only systems, because the
dynamic library would unnecessarily take up target disk space for such
systems.

Users that only need the static library would still need to remove the
shared library from a post-build script to actually save space.

Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/links: enable building graphics mode with only fb driver

The "fb" framebuffer driver needs GPM (mouse support) to compile,
but not DirectFB or Xorg.

The .mk file already has an optional dependency on GPM, so it doesn't
need to be added there.

Also added a Kconfig comment for easier discovery of the GPM
requirement.

Signed-off-by: Urja Rannikko <urjaman@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/cage: bump to version 0.1.3

Update to version 0.1.3, which is a matenance release which does not
add any new features but can be built against wlroots 0.13.0. A new
build option to toggle man pages is set to always disabled.

Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/wlroots: use libseat when available

Enable using libseat for seat management when possible.

Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/seatd: install init scripts

Add commands to the seatd package to install the systemd unit included
in the source tarball and a SysV init script, and ensure that the
"video" group gets created.

Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[yann.morin.1998@free.fr:
  - model the init script after package/busybox/S01syslogd
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/seatd: new package

Introduce a seatd package, which can be used by wlroots 0.12.0 and
newer. The package includes both a library (always built) and an
optional seat management daemon.

The library can use systemd-logind, the seatd daemon, or a simple
builtin in-process mode. Build options are introduced for the daemon
and the built-in mode, as to allow selecting the built-in mode as
default when both the daemon and systemd-logind are not being built.

Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/wlroots: bump to version 0.13.0

Update wlroots to version 0.13.0. This is a release which changes
API/ABI, applications which use wlroots need to be rebuilt. Currently in
Buildroot there is only cage, to be updated by a follow-up patch of the
series.

Additionally, remove usage of the xcb-icccm build option, which is no
longer available and update the dependencies needed by the X11 support.
Note that the dependencies neded by the X11 backend are a superset of
the ones needed for XWayland support, so we can make toggle both Meson
options at once.

Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/kodi-inputstream-adaptive: bump version to 2.6.15-Matrix

Changelog:
https://github.com/xbmc/inputstream.adaptive/blob/Matrix/inputstream.adaptive/addon.xml.in#L22

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/kodi-pvr-mediaportal-tvserver: bump version to 8.2.0-Matrix

Changelog:
https://github.com/kodi-pvr/pvr.mediaportal.tvserver/blob/Matrix/pvr.mediaportal.tvserver/changelog.txt

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/cog: bump to version 0.10.0

Release notes:

  https://wpewebkit.org/release/cog-0.10.0.html

Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/wpewebkit: bump to version 2.32.1

Update to a new major release which brings in improvements and a few new
features. Release notes:

  https://wpewebkit.org/release/wpewebkit-2.32.0.html
  https://wpewebkit.org/release/wpewebkit-2.32.1.html

None of the new features in WPE WebKit 2.32.x need additional
dependencies.

The existing patch for Musl compatibility is not needed anymore because
a better solution has been accepted upstream and backported to be
included in the 2.32.1 release.

Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/wpebackend-fdo: bump to version 1.9.92

Update to version 1.9.92 which, while even being a release candidate,
is more stable than the 1.8.1 present in Buildroot.

Release notes:

  https://wpewebkit.org/release/wpebackend-fdo-1.9.90.html
  https://wpewebkit.org/release/wpebackend-fdo-1.9.91.html
  https://wpewebkit.org/release/wpebackend-fdo-1.9.92.html

Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libwpe: bump to version 1.10.0

Release notes:

  https://wpewebkit.org/release/libwpe-1.10.0.html

The patch is removed, as it has been included upstream.

Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/poke: enable uClibc-ng support

poke bundle gnulib that doesn't support the case where
host_os='linux-uclibc'. When cross-compiling, the guessed
answers are mostly wrong and gnulib will try to replace
snprintf with rpl_snprintf. This lead to "undefined reference
to `rpl_snprintf'" errors.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/poke: add optional json-c dependency

From [1]:
"The poke machine-interface uses a protocol to communicate with
clients, which is based on JSON.  poke uses the json-c library to
parse and build JSON strings.
If this library is not found, poke will build without machine-interface
support."

[1] https://git.savannah.nongnu.org/cgit/poke.git/tree/DEPENDENCIES?h=releases/poke-1.2#n55

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Jose E. Marchesi <jemarch@gnu.org>
Cc: Luca Saiu <positron@gnu.org>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/poke: new package

Backport a patch to disable tcl/tk dependencies when gui support
is disabled.

Backport and rebase a patch to avoid host poisoning while
cross-compiling.

Add another local patch when HELP2MAN is missing.

Disable uClibc-ng toolchain for now due to issues with
bundled gnulib.

The license of gnulib is not easy to describe because
it bundle several sources files with different license [1][2].
Even if not SPDX compliant, use "gnulib license".

[1] https://git.savannah.gnu.org/cgit/gnulib.git/tree/COPYING
[2] https://src.fedoraproject.org/rpms/gnulib/blob/rawhide/f/gnulib.spec#_53

See:
http://www.jemarch.net/poke-1.0-relnotes.html
http://www.jemarch.net/poke-1.1-relnotes.html
http://www.jemarch.net/poke-1.2-relnotes.html

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Jose E. Marchesi <jemarch@gnu.org>
Cc: Luca Saiu <positron@gnu.org>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr:
  - propagate BR2_PACKAGE_LIBATOMIC_OPS_ARCH_SUPPORTS dependency to comment
  - select busybos-show-others
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

configs/beaglebone: bump kernel and U-Boot versions

- Bump kernel to version 5.10.30-ti-r3.
- Bump U-Boot to version 2021.04.

Add mdev to the beaglebone_defconfig. This gives us automatic USB support,
as the omap2plus kernel has most drivers as modules.

While at it, enable VFPv3 with 32 registers (instead of 16) and add a few
comments to the defconfig.

Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/pipewire: fix uclibc compile (getrandom related)

The getrandom() detection from meson.build failes with the following error
message:

  .../host/x86_64-buildroot-linux-uclibc/sysroot/usr/include/sys/random.h:27:35: error: unknown type name 'size_t'
     27 | extern int getrandom(void *__buf, size_t count, unsigned int flags)
        |                                   ^~~~~~
  .../host/x86_64-buildroot-linux-uclibc/sysroot/usr/include/sys/random.h:8:1: note: 'size_t' is defined in header '<stddef.h>'; did you forget to '#include <stddef.h>'?

Fix it by adding stddef.h include to the meson getrandom() detection.

Fixes:

  - http://autobuild.buildroot.net/results/7e131bec458bf5c263ee1858d38ed5dc3cf704a6

  ../src/pipewire/impl-core.c:54:9: error: conflicting types for ‘getrandom’
     54 | ssize_t getrandom(void *buf, size_t buflen, unsigned int flags) {
        |         ^~~~~~~~~
  In file included from ../src/pipewire/impl-core.c:34:
  .../host/x86_64-buildroot-linux-uclibc/sysroot/usr/include/sys/random.h:27:12: note: previous declaration of ‘getrandom’ was here
     27 | extern int getrandom(void *__buf, size_t count, unsigned int flags)
        |            ^~~~~~~~~

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/pipewire: bump version to 0.3.27

- remove 0001-meson-prefer-libintl-on-FreeBSD.patch
  (from upstream [1])

[1] https://gitlab.freedesktop.org/pipewire/pipewire/-/commit/4d064a37183a0bf8198914dd68b063b2c9def17e

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/ethtool: bump to version 5.12

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/mbuffer: bump to version 20210328

Signed-off-by: Mircea GLIGA <mgliga@bitdefender.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

configs: add espressobin ultra dts and bump kernel to 5.11.21

This patch adds support for the Globalscale EspressoBin Ultra, which is
an evolution of the EspressoBin family.  Same SoC and switchcore, more
Ethernet ports, including one PoE PD port.

Tested-by: Atallah Amine <amine_atallah@outlook.com>
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/gcc: enable secureplt for powerpc64

GCC support enabling secureplt for powerpc64.

From [1]
"PowerPC has two PLT models: BSS-PLT and Secure-PLT. BSS-PLT uses
runtime code generation to generate the PLT stubs. Secure-PLT was
introduced with GCC 4.1 and Binutils 2.17 (base has GCC 4.2.1 and
Binutils 2.17), and is a more secure PLT format, using a read-only
linkage table, with the dynamic linker populating a non-executable
index table."

This option is always enabled by glibc testing script
called build-many-glibcs.py [1]. This script exist since
glibc 2.25.

Runtime tested with qemu_ppc64_e5500_defconfig.

[1] https://reviews.freebsd.org/D20598
[2] https://sourceware.org/git/?p=glibc.git;a=blob;f=scripts/build-many-glibcs.py;h=9c08ab7b326e6385abb835eb32dd143952a71942;hb=9826b03b747b841f5fc6de2054bf1ef3f5c4bdf3#l345

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Matt Weber <matthew.weber@collins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/python-pytest-asyncio: bump version to 0.15.1

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libcap: bump to version 2.49

Release notes:
https://sites.google.com/site/fullycapable/release-notes-for-libcap

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/nano: bump to version 5.7

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/links: bump version to 2.22

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libqmi: bump version to 1.28.4

Drop patch backported from this release.

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/rpcbind: bump version to 1.3.2

Rebased yellow pages patch.

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/rtty: bump version to 7.4.0

Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libuhttpd: bump version to 3.11.0

Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libubootenv: bump to version 0.3.2

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/iproute2: bump version to 5.12.0

Backport from upstream mailing list patch from Heiko Thiery which fixes
missing {name_to,open_by}_handle_at() on uclibc-ng < 1.0.35.

Drop patch from v5.8.0.

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

DEVELOPERS: add files related to EDK2 for Dick Olsson

Signed-off-by: Dick Olsson <hi@senzilla.io>
[yann.morin.1998@free.fr: drop files from patches not applied]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

support/testing: new boot test for EDK2

Boot a QEMU sbsa-ref machine with ATF, EDK2, GRUB2 and a minimal
kernel. This is a simple but effective test of a compliant setup.

Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

configs/qemu_aarch64_sbsa_defconfig: new config for QEMU sbsa-ref

This introduces a configuration for the SBSA reference machine under
QEMU that is intended for developing and testing firmware. It consists
of ATF that load EDK2 as BL33 which in turn will load GRUB2.

Included with the board files is a minimal kernel configuration, almost
identical to that of board/qemu/aarch64-virt/linux.config. The main
difference is the addition of ACPI which is preferred over DTB for
booting an UEFI system.

Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

boot/edk2: new package

EDK2 is a modern, feature-rich, cross-platform firmware development
environment for the UEFI and PI specifications.

The initial version of this bootloader package makes it possible to
build firmware for the following seven configurations:

 * QEMU x86-64 pc machine
 * QEMU aarch64 virt machine, booting directly from flash
 * QEMU aarch64 virt machine, booting via the kernel protocol
 * QEMU aarch64 sbsa-ref machine
 * ARM FVP vexpress machine
 * Socionext SynQuacer Developerbox
 * SolidRun MacchiatoBin

Support the use of EDK2 UEFI payloads as BL33 in ARM Trusted Firmware.

Signed-off-by: Dick Olsson <hi@senzilla.io>
[yann.morin.1998@free.fr:
  - duplicate defaults in Config.in
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/edk2-platforms: new package

EDK2 firmware is usually built from two sources; the core EDK2
environment, and additional platform description files maintained
separately. This package adds the latter set of description files to
staging so that the core EDK2 package can build with these for certain
platforms during the building process.

Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libatomic_ops: enable for riscv32 and riscv64

The riscv support has been added since v7.6.4 release.

https://github.com/ivmai/libatomic_ops/commit/137643f1417ded071c56e05401ca6a3c16492d96

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
[yann.morin.1998@free.fr:
  - split the long line
  - reorder the archs alphabetically, and group related ones
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/bdwgc: Fix 'undefined reference to __data_start' linker error on RISC-V

Backport an upstream patch fixing a link issue with libgc.so on RISC-V

riscv64-buildroot-linux-musl/sysroot/usr/lib/libgc.so: undefined reference to `__data_start'

https://gitlab.com/kubu93/buildroot/-/jobs/1229888983

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libopenssl: add option to enable some features

Openssl implements lot of algorithms that are not required in some
emdedded devices and cyphers known as weak. Secure embedded systems
shall disable unused algorithms (and weak algo) in order to be
certified.

This patch allows to select weak algorithms and mecanims to enable
such as md5.

To ensure backward compatibility, all items are selected by default.

Signed-off-by: Erwan GAUTRON <erwan.gautron@bertin.fr>
[yann.morin.1998@free.fr:
  - drop help texts that just repeat the prompts
  - fix check-package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libnss: bump version to 3.65

Release Notes (not yet available, but should eventually land):
https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/NSS_3.65_release_notes

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr: release notes not yet available]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/kodi-pvr-iptvsimple: bump version to 7.6.5-Matrix

Changelog:
https://github.com/kodi-pvr/pvr.iptvsimple/blob/Matrix/pvr.iptvsimple/changelog.txt

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/wayland: bump to version 1.19.0

Update wayland to version 1.19.0, which mostly includes bug fixes and is
the minimum version required by wlroots 0.13.0

Patch "0001-build-add-option-to-disable-tests.patch" is updated as an
actual backport from upstream. Since upstream has migrated to meson, and
we've already switched too, drop the autostuff hunks.

Patch "0002-meson-do-not-check-for-c.patch" is replaced by a newer one,
"0002-meson-only-require-cpp-for-tests.patch" which was accepted by
upstream as an improved version of it.

Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[yann.morin.1998@free.fr:
  - do actual backports of upstream patches now they've been merged
  - consequently, drop the legacy autostuff hunks from first patch
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libbluray: add optional support for libudfread

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libbluray: bump version to 1.3.0

Removed backported patch.

Changelog:
https://code.videolan.org/videolan/libbluray/-/blob/master/ChangeLog

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libudfread: bump version to 1.1.2

Changelog:
https://code.videolan.org/videolan/libudfread/-/blob/master/ChangeLog

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gnuchess: bump to version 6.2.8

https://lists.gnu.org/archive/html/info-gnu-chess/2021-05/msg00000.html

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/kodi-pvr-mediaportal-tvserver: bump version to 8.1.2

Removed all patches which were applied upstream:
https://github.com/kodi-pvr/pvr.mediaportal.tvserver/commits/Matrix

Changelog:
https://github.com/kodi-pvr/pvr.mediaportal.tvserver/blob/Matrix/pvr.mediaportal.tvserver/changelog.txt

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2021.05-rc1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

boot/opensbi: unconditionally disable SSP

Fix build failure raised since commit
810ba387bec3c5b6904e8893fb4cb6f9d3717466

Fixes:
 - https://gitlab.com/kubu93/buildroot/-/jobs/1247043359

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/sysklogd: bump to version 2.2.3

https://github.com/troglobit/sysklogd/releases/tag/v2.2.3

Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/kodi: bump version to 19.1

Removed patch 0002 which was applied upstream:
https://github.com/xbmc/xbmc/commit/c9cf94d3108d742e50ea73b5553125ef5e405c73

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/kodi-pvr-nextpvr: bump version to 8.2.3-Matrix

Changelog:
https://github.com/kodi-pvr/pvr.nextpvr/blob/Matrix/pvr.nextpvr/changelog.txt

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/luvi: bump to version 2.12.0

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/luv: bump to version 1.41.0-0

Enable Lua 5.4 support which is fixed now.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/upmpdcli: bump to version 1.5.12

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/php: bump version to 7.4.19

Changelog: https://www.php.net/ChangeLog-7.php#7.4.19

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xdriver_xf86-input-libinput: bump version to 1.0.1

Release notes:
https://lists.x.org/archives/xorg-announce/2021-April/003083.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/x11r7/xorgproto: bump version to 2021.4

Release notes:
https://lists.x.org/archives/xorg-announce/2021-April/003085.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/tor: bump version to 0.4.5.8

Release notes: https://blog.torproject.org/node/2031

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/kodi-pvr-iptvsimple: bump version to 7.6.4-Matrix

Changelog:
https://github.com/kodi-pvr/pvr.iptvsimple/blob/Matrix/pvr.iptvsimple/changelog.txt

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/kodi-inputstream-ffmpegdirect: bump version to 1.21.3-Matrix

Changelog:
https://github.com/xbmc/inputstream.ffmpegdirect/blob/Matrix/inputstream.ffmpegdirect/changelog.txt

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-pyjwt: Bump to version 2.1.0

Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/log4qt: add telnet optional logging

Telnet logging is an optional feature that's disabled by default.

Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/log4qt: link with latomic if needed

Fixes:
 - http://autobuild.buildroot.net/results/fb5/fb52f5366a25230606149f44dc46f86f0273a680/

Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libcamera: bump version to 3a1f67a

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/rpi-wifi-firmware: bump version to 4c47758

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/rpi-bt-firmware: bump version to 4c47758

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/rpi-userland: bump version to 45a0022

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/rpi-firmware: bump version to 1a46874

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/raspberrypi*: bump kernel version to 96110e9 (5.10.33)

Now based on 5.10.33 (from 5.10.1).

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libinput: bump version to 1.17.2

For details see [1].

[1] https://lists.freedesktop.org/archives/wayland-devel/2021-April/041809.html

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES: update with recent changes

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/elfutils: bump to version 0.184

https://sourceware.org/pipermail/elfutils-devel/2021q2/003797.html

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gerbera: bump to version 1.8.1

https://github.com/gerbera/gerbera/releases/tag/v1.8.1

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/domoticz: needs gcc >= 6

domoticz fails to build with gcc 5 since bump to version 2021.1 in
commit 33b49c4ae33e767b86130cbc1844e2003bbe0f98 because domoticz needs
C++14 since
https://github.com/domoticz/domoticz/commit/bdf82257dc93daa78b0179a0229539553b608f6b

Fixes:
 - http://autobuild.buildroot.org/results/f4f9caa44d1836279c3806bc990a1203bf743c0d

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/ruby: links with atomic if needed

Build fails since bump to version 3.0.0 in commit
af5226f2fd1292a26f2dfda32f41cbbad7aa4cc because ruby needs atomic
operation support since
https://github.com/ruby/ruby/commit/6ed6b85ece8733518a7da0c3ec714f20d1102bf5

Fixes:
 - http://autobuild.buildroot.org/results/84ee5f4688be994a5440c3a61bddabee72ca3b3c

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/lvm2: bump version to 2.03.12

Downstream patches have been mainlined in commits [1] (v2.03.06) and
[2] (v2.03.12). Second patch was slightly modified, so replace
--disable-symvers with --with-symvers=no.

[1] https://github.com/lvmteam/lvm2/commit/125f27ac37bc9b93cc96f64052b9681b3d479ee1
[2] https://github.com/lvmteam/lvm2/commit/1cedbaf13778de02e38b5dc80a7af246b7ec83e5

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/lvm2: use http instead of ftp

ftp links do not seem to be accessible anymore. Replace them with http.

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

boot/Config.in: fix beaglev-ddrinit include after rename

Commit 3b551f68a55d74f (boot/beaglev-ddrlnit: rename to beaglev-ddrinit to
match renamed upstream repo) forgot to update the include in boot/Config.in,
breaking menuconfig.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/acmesystems_acqua_a5_{256, 512}mb: add openssl host dependency

The Linux build needs openssl:

https://gitlab.com/buildroot.org/buildroot/-/jobs/1240157423
https://gitlab.com/buildroot.org/buildroot/-/jobs/1240157424

Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/boost: fix broken BOOST_SITE URL

Current URL returns 403 error:

--2021-05-10 10:04:12--  https://dl.bintray.com/boostorg/release/1.75.0/source/boost_1_75_0.tar.bz2
Resolving dl.bintray.com... 18.193.131.58, 3.66.199.110
Connecting to dl.bintray.com|18.193.131.58|:443... connected.
HTTP request sent, awaiting response... 403 Forbidden
2021-05-10 10:04:12 ERROR 403: Forbidden.

Bintray has been sunset on May 1st:
https://jfrog.com/blog/into-the-sunset-bintray-jcenter-gocenter-and-chartcenter/

Update the URL to the new upstream location to fix this issue.

Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

support/testing: add sudo package test

Create a new user 'sudotest' to validate that sudo really works (i.e.
properly has setuid).

Creating the user and adding it to sudoers is done at runtime, otherwise
we'd need to add extra files to the config which complicates things a
little bit.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/kodi-inputstream-ffmpegdirect: bump version to 1.21.2-Matrix

Changelog:
https://github.com/xbmc/inputstream.ffmpegdirect/blob/Matrix/inputstream.ffmpegdirect/changelog.txt

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/kodi-pvr-iptvsimple: bump version to 7.6.2-Matrix

Changelog:
https://github.com/kodi-pvr/pvr.iptvsimple/blob/Matrix/pvr.iptvsimple/changelog.txt

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

boot/beaglev-ddrlnit: rename to beaglev-ddrinit to match renamed upstream repo

And adjust DEVELOPERS and beaglev_defconfig to match.

The typo in the repo name has now been fixed:

https://github.com/starfive-tech/beagle_ddrinit/issues/6

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/bullet: needs dynamic library

Build without dlfcn.h fails because bullet3 is not disabled since
commit 5f154799b6ed772a0c028072996e110fac131508

Fixes:
 - http://autobuild.buildroot.org/results/ab2efdd1eac64474adf00d8e60b42110c6e89143

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/hwloc: bump to version 2.4.1

- Add ac_cv_prog_cc_c99 to avoid a build failure due to
  https://github.com/open-mpi/hwloc/commit/f2226f76e104923a76c5d09328284104abad6b01
- Update hash of COPYING, copyrights added with
  https://github.com/open-mpi/hwloc/commit/ebaa3595e2ddc6e0e94e8ea5b1472f1a21969c80
- Update indentation in hash file (two spaces)

As a side effect, this will remove numactl dependency (which raises a
build failure with sparc v8 since commit
4ed540ddf59bec4b389be44d7f42820d2466904f) thanks to:
https://github.com/open-mpi/hwloc/commit/e6a53bbf65458fd5fe4d45d5a83027b530566591

https://github.com/open-mpi/hwloc/blob/hwloc-2.4.1/NEWS

Fixes:
 - http://autobuild.buildroot.org/results/5f9394d3bab4e83edbea9bc607c3e135adfdabbc

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/putty: fix build on uclibc

Fix build failure on uclibc raised since bump to version 0.75 in commit
d562009f7b9701cb20bc4b1d389d19f9a647cc3b

Fixes:
 - http://autobuild.buildroot.org/results/726f7c5ce13e78ed91e827b872e9d7ccfa13f298

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>