binutils-gdb.git
6 years agoNotify about breakpoint modification when enabling/disabling single location
Jan Vrany [Thu, 31 May 2018 08:56:33 +0000 (09:56 +0100)]
Notify about breakpoint modification when enabling/disabling single location

When a single breakpoint location enableness was modified by a CLI
command, observers were not notified about it. This issue is now fixed.

gdb/ChangeLog:

* breakpoint.c (enable_disable_bp_num_loc): Notify observers.

gdb/testsuite/ChangeLog:

* gdb.mi/mi-breakpoint-location-ena-dis.cc: New file.
* gdb.mi/mi-breakpoint-location-ena-dis.exp: New file.

6 years agolist Tom Tromey as GDB Global Maintainer
Joel Brobecker [Wed, 25 Jul 2018 14:57:27 +0000 (10:57 -0400)]
list Tom Tromey as GDB Global Maintainer

gdb/ChangeLog:

        * MAINTAINERS (Global Maintainers): Add Tom Tromey.

6 years agoClarify doc for .arch/.cpu
Thomas Preud'homme [Wed, 25 Jul 2018 08:51:51 +0000 (09:51 +0100)]
Clarify doc for .arch/.cpu

Documentation for .arch and .cpu directives currently says that it
accepts the same name as -march/-mcpu command-line options respectively.
However it only accept the architecture/CPU part of those options: it
does not accept specifying an extension which is done via
.arch_extension. This patch clarifies that the extension is not
accepted.

2018-07-25  Thomas Preud'homme  <thomas.preudhomme@linaro.org>

gas/
* doc/c-arm.texi (.arch directive): Clarify that name must not include
an extension.
(.cpu directive): Likewise.

6 years agoFix potential memory leaks in some of the binutils source files.
Nick Clifton [Wed, 25 Jul 2018 09:56:45 +0000 (10:56 +0100)]
Fix potential memory leaks in some of the binutils source files.

* rdcoff.c (parse_coff_struct_type): Free fields array upon early
exit.
(parse_coff_enum_type): Free names and vals arrays upon early
exit.
* rddbg.c (read_section_stabs_debugging_info): Free shandle and
strings and stabs arrays upon early exit.
* readelf.c (get_32bit_section_headers): Free shdrs structure upon
early exit.
(get_64bit_section_headers): Likewise.
(get_32bit_elf_symbols): Generate an error if multiple symbol
table index sections are associated with the same symbol section.
(get_64bit_elf_symbols): Likewise.
(process_dynamic_section): Generate an error if there are multiple
dynamic symbol table sections, multiple dynamic string tables or
multiple dynamic symbol information sections.

6 years agoEnhance powerpc ld -r --relax
Alan Modra [Wed, 25 Jul 2018 05:54:55 +0000 (15:24 +0930)]
Enhance powerpc ld -r --relax

One of the ill effects of ld -r is to mash together sections.  That
can result in reduced icache performance at runtime due to unexpected
movement of code.  Another problem is that sections can become too
large to link on targets that have limited relative addressing.  ld -r
--relax attempts to overcome the large section problem for branches by
inserting trampolines, but the powerpc support added lots of
unnecessary trampolines.  This patch trims them somewhat.

bfd/
* elf32-ppc.c (ppc_elf_relax_section): Ignore common or undef locals.
Avoid trashing toff with added when used as a symbol index.
Ignore R_PPC_PLTREL24 addends in unused example code.  Avoid
creating unnecessary fixups when relocatable.
ld/
* testsuite/ld-powerpc/big.s: New file.
* testsuite/ld-powerpc/relaxrl.d: New test.
* testsuite/ld-powerpc/powerpc.exp: Run new test.
* testsuite/ld-powerpc/relaxr.d: Adjust.

6 years agoSuppress string diagnostics for pre-release GCC
Alan Modra [Wed, 25 Jul 2018 02:10:48 +0000 (11:40 +0930)]
Suppress string diagnostics for pre-release GCC

Extends commit 898ade12ee8 to cover other targets.

* elf32-arm.c (elf32_arm_nabi_write_core_note): Disable
-Wstringop-truncation warning for gcc-8.0 too.
* elf32-ppc.c (ppc_elf_write_core_note): Likewise.
* elf64-ppc.c (ppc64_elf_write_core_note): Likewise.
* elfxx-aarch64.c (_bfd_aarch64_elf_write_core_note): Likewise.
* elf32-s390.c (elf_s390_write_core_note): Comment fix.
* elf64-s390.c (elf_s390_write_core_note): Likewise.

6 years agoAutomatic date update in version.in
GDB Administrator [Wed, 25 Jul 2018 00:00:36 +0000 (00:00 +0000)]
Automatic date update in version.in

6 years agoSet CU language before processing any DIEs (symtab/23010 et al)
Keith Seitz [Tue, 24 Jul 2018 19:48:58 +0000 (12:48 -0700)]
Set CU language before processing any DIEs (symtab/23010 et al)

This patch is another attempt at really fixing the multitude of assertions
being seen where symbols of one language are being added to symbol lists of
another language.

In this specific case, the backtrace command (thread apply all bt full) that
is looking for the compunit containing the PC of the thread. That calls
get_prev_frame several times. This function calls (eventually)
dwarf2_frame_prev_register. That eventually ends up calling
find_pc_compunit_symtab.

In this function (find_pc_sect_compunit_symtab actually), we loop over all
compunits, calling the "quick" function dw2_find_pc_sect_compunit_symtab.
That function calls dw2_instantiate_symtab to read in all the CU's symbols.
Now the fun begins.

dw2_do_instantiate_symtab queues the per_cu for reading, using a default
"pretend" language of language_minimal with the expectation that this will
be set later.

The DIEs of this (only queued) CU are then processed.

The first DIE is DW_TAG_compile_unit. That's handled by read_file_scope.

(Nearly) The first thing read_file_scope does is:

  get_scope_pc_bounds (die, &lowpc, &highpc, cu);

This function loops over the children of the current DIE (a compile_unit),
looking for bounds. The first such child is a subprogram, and we attempt to
get its bounds. We use dwarf2_attr to get at DW_AT_high_pc.

This subprogram has DW_AT_specification set, so dwarf_attr (via
follow_die_ref/follow_die_offset) will follow that, but follow_die_offset
*also* attempts to load the containing CU for the spec DIE. That spec DIE
lives inside a CU that is a partial_unit and has no language attribute. So
it simply inherits the language from the CU that elicited the read. [That
all happens in follow_die_offset.]

The original CU's language is still language_minimal -- we haven't gotten to
the line in read_file_scope that actually sets the language yet!

And that is the cause of these problems. The call to prepare_one_comp_unit
needs to be the *first* thing that is done when reading a CU so that the
CU's language can be recorded (and inherited by any referenced
partial_units).

Since a test reproducer for this has been so elusive, this patch also adds a
wrapper function around add_symbol_to_list which asserts when adding a
symbol of one language to a list containing symbols of a different language.

gdb/ChangeLog:
2017-07-24  Keith Seitz  <keiths@redhat.com>

        PR symtab/23010
        * dwarf2read.c (dw2_add_symbol_to_list): New function.
        (fixup_go_packaging, new_symbol): Use dw2_add_symbol_to_list
        instead of add_symbol_to_list.
        (read_file_scope): Call prepare_one_comp_unit before reading
        any other DIEs.

6 years agoFix indentation in scoped_mmap.h
Simon Marchi [Tue, 24 Jul 2018 18:14:17 +0000 (14:14 -0400)]
Fix indentation in scoped_mmap.h

gdb/ChangeLog:

* common/scoped_mmap.h (class scoped_mmap): Fix indentation.

6 years agoRemove some unnecessary declarations and configury
Tom Tromey [Sun, 22 Jul 2018 15:34:42 +0000 (09:34 -0600)]
Remove some unnecessary declarations and configury

configure checks for declarations of free, malloc, and realloc; but
the results are only used in a single spot: utils.c.  I think these
checks are long since obsolete, so this patch removes them.

Grepping the entire tree for these HAVE_DECL_ symbols, the only uses
of possible interest to gdb come from bfd/sysdep.h; but this is not
(nor should be) included by gdb.  (And furthermore I think the code
there is probably also obsolete.)

gdb/ChangeLog
2018-07-24  Tom Tromey  <tom@tromey.com>

* utils.c (malloc, realloc, free): Don't declare.
* configure, config.in: Rebuild.
* configure.ac: Don't check for declarations of free, malloc, or
realloc.

6 years agox86: Use unsigned int to iterate through vector operands
H.J. Lu [Tue, 24 Jul 2018 16:47:47 +0000 (09:47 -0700)]
x86: Use unsigned int to iterate through vector operands

Use unsigned int to iterate through multi-length vector operands to avoid
sign-extension.

* config/tc-i386.c (build_vex_prefix): Use unsigned int to
iterate through multi-length vector operands.
(build_evex_prefix): Likewise.

6 years agoUpdated French translation for ld/ and Swedish translation for binutils/
Nick Clifton [Tue, 24 Jul 2018 13:07:54 +0000 (14:07 +0100)]
Updated French translation for ld/ and Swedish translation for binutils/

bin * po/sv.po: Updated Swedish translation.

ld * po/fr.po: Updated French translation.

6 years agoPR23431, Messages composed from pieces can't be properly translated
Alan Modra [Mon, 23 Jul 2018 23:41:35 +0000 (09:11 +0930)]
PR23431, Messages composed from pieces can't be properly translated

PR 23431
* dwarf.c (display_formatted_table): Replace "what" parameter
with "is_dir".  Expand messages.  Fix capitalisation.
* testsuite/binutils-all/dw5.W: Update expected output.

6 years agoPR23430, Indices misspelled
Alan Modra [Tue, 24 Jul 2018 07:05:52 +0000 (16:35 +0930)]
PR23430, Indices misspelled

PR 23430
include/
* elf/common.h (SHT_SYMTAB_SHNDX): Fix comment typo.
bfd/
* dwarf2.c (dwarf_debug_section_enum): Fix comment typo.
* elf.c (bfd_section_from_shdr, elf_sort_sections): Likewise.
binutils/
* elfcomm.h (struct archive_info): Rename uses_64bit_indicies
to uses_64bit_indices.
* elfcomm.c (setup_archive): Update uses of above.
* readelf.c (process_archive): Likewise.
(get_section_type_name): Rename indicies to indices.
(get_32bit_elf_symbols, get_64bit_elf_symbols): Likewise.
(process_section_groups): Likewise.
cpu/
* or1kcommon.cpu (spr-reg-indices): Fix description typo.
opcodes/
* or1k-desc.h: Regenerate.

6 years agox86-64: correct AVX512F vcvtsi2s{d,s} handling
Jan Beulich [Tue, 24 Jul 2018 07:46:27 +0000 (09:46 +0200)]
x86-64: correct AVX512F vcvtsi2s{d,s} handling

Just like for their AVX counterparts and CVTSI2S{D,S}, a memory source
here is ambiguous and hence
- in source files should be qualified with a suitable suffix or operand
  size specifier (not doing so is an error in Intel mode, and will gain
  a diagnostic in AT&T mode in the future),
- in disassembly should be properly suffixed (the Intel operand size
  specifiers were emitted correctly already).

6 years agoAutomatic date update in version.in
GDB Administrator [Tue, 24 Jul 2018 00:00:43 +0000 (00:00 +0000)]
Automatic date update in version.in

6 years agoxtensa: ld: convert tests to run_dump_test
Max Filippov [Mon, 23 Jul 2018 04:45:48 +0000 (21:45 -0700)]
xtensa: ld: convert tests to run_dump_test

Three tests with individual .exp files can be implemented in less
verbose way with run_dump_test infrastructure. Convert them.

ld/
2018-07-23  Max Filippov  <jcmvbkbc@gmail.com>

* testsuite/ld-xtensa/coalesce.d: New file.
* testsuite/ld-xtensa/coalesce.exp: Remove file.
* testsuite/ld-xtensa/diff_overflow.d: New file.
* testsuite/ld-xtensa/diff_overflow.exp: Remove file.
* testsuite/ld-xtensa/lcall.d: New file.
* testsuite/ld-xtensa/lcall.exp: Remove file.
* testsuite/ld-xtensa/xtensa.exp (coalesce, diff_overflow)
(lcall): New tests.

6 years agoxtensa: ld: add tests for static linkage relaxation
Max Filippov [Fri, 20 Jul 2018 04:00:29 +0000 (21:00 -0700)]
xtensa: ld: add tests for static linkage relaxation

ld/
2018-07-23  Max Filippov  <jcmvbkbc@gmail.com>

* testsuite/ld-xtensa/relax-static-defs.s: New file.
* testsuite/ld-xtensa/relax-static-local-pie.d: New file.
* testsuite/ld-xtensa/relax-static-local-shared.d: New file.
* testsuite/ld-xtensa/relax-static-local.s: New file.
* testsuite/ld-xtensa/relax-static-pie.d: New file.
* testsuite/ld-xtensa/relax-static-shared.d: New file.
* testsuite/ld-xtensa/relax-static.s: New file.
* testsuite/ld-xtensa/relax-undef-weak-local-pie.d: New file.
* testsuite/ld-xtensa/relax-undef-weak-local-shared.d: New file.
* testsuite/ld-xtensa/relax-undef-weak-local.s: New file.
* testsuite/ld-xtensa/relax-undef-weak-pie.d: New file.
* testsuite/ld-xtensa/relax-undef-weak-shared.d: New file.
* testsuite/ld-xtensa/relax-undef-weak.s: New file.
* testsuite/ld-xtensa/xtensa.exp: New file.

6 years agoxtensa: ld: rename xtensa.exp to xtensa-linux.exp
Max Filippov [Sun, 22 Jul 2018 01:32:32 +0000 (18:32 -0700)]
xtensa: ld: rename xtensa.exp to xtensa-linux.exp

xtensa.exp in fact only checks xtensa*-*-linux* configurations, rename
it to xtensa-linux.exp to allow xtensa.exp to check xtensa*-*-*.

ld/
2018-07-23  Max Filippov  <jcmvbkbc@gmail.com>

* testsuite/ld-xtensa/xtensa.exp: Rename to xtensa-linux.exp.

6 years agoxtensa: move dynamic relocations sections consistency check
Max Filippov [Mon, 23 Jul 2018 01:59:11 +0000 (18:59 -0700)]
xtensa: move dynamic relocations sections consistency check

The function elf_xtensa_finish_dynamic_sections checks that sizes of
sections .rela.dyn and .rela.plt match number of corresponding relocation
records, but the check is only done when .rela.plt is non-empty, so, e.g.
it is never run for the static PIE.
Rearrange the test so that .rela.dyn and .rela.plt are checked always.

bfd/
2018-07-23  Max Filippov  <jcmvbkbc@gmail.com>

* elf32-xtensa.c (elf_xtensa_finish_dynamic_sections): Move
relocation sections consistency check to always check both
.rela.dyn and .rela.plt when they exist. Rearrange variable
definition and assignment places.

6 years agoxtensa: fix relaxation of undefined weak references in shared objects
Max Filippov [Sun, 22 Jul 2018 20:52:28 +0000 (13:52 -0700)]
xtensa: fix relaxation of undefined weak references in shared objects

The change c451bb34ae8b ("xtensa: don't emit dynamic relocation for weak
undefined symbol") didn't properly handle shrinking of relocation
sections due to coalescing of references to a dynamic undefined weak
symbol in a shared object, which resulted in the following assertion
failure in ld when linking uClibc-ng libthread_db for xtensa:

  BFD (GNU Binutils) 2.31 internal error, aborting at elf32-xtensa.c:3269
  in elf_xtensa_finish_dynamic_sections

Shrink dynamic relocations section for dynamic undefined weak symbols
when linking a shared object.

bfd/
2018-07-23  Max Filippov  <jcmvbkbc@gmail.com>

* elf32-xtensa.c (shrink_dynamic_reloc_sections): Shrink dynamic
relocations section for dynamic undefined weak symbols when
linking a shared object.

6 years agoAvoid ubsan complaint in BFD
Tom Tromey [Mon, 16 Jul 2018 00:07:40 +0000 (18:07 -0600)]
Avoid ubsan complaint in BFD

I built gdb with ubsan and ran the test suite.

One complaint was due to bfd_get_elf_phdrs passing NULL to memcpy.
This patch avoids the complaint.

bfd/ChangeLog
2018-07-23  Tom Tromey  <tom@tromey.com>

* elf.c (bfd_get_elf_phdrs): Don't call memcpy with size 0.

6 years agox86: Add a test for missing broadcast
H.J. Lu [Mon, 23 Jul 2018 13:32:20 +0000 (06:32 -0700)]
x86: Add a test for missing broadcast

For

.intel_syntax noprefix
vcvtps2qq xmm0, DWORD PTR [rax]

we should get

Error: broadcast is needed for operand of such type for `vcvtps2qq'

* testsuite/gas/i386/inval-avx512f.s: Add a test for missing
broadcast.
* testsuite/gas/i386/x86-64-inval-avx512f.s: Likewise.
* testsuite/gas/i386/inval-avx512f.l: Updated.
* testsuite/gas/i386/x86-64-inval-avx512f.l: Likewise.

6 years agox86: Remove broadcast_not_on_src_operand
H.J. Lu [Mon, 23 Jul 2018 12:43:43 +0000 (05:43 -0700)]
x86: Remove broadcast_not_on_src_operand

Remove broadcast_not_on_src_operand since it is unused.

* config/tc-i386.c (i386_error): Remove
broadcast_not_on_src_operand.
(match_template): Likewse.

6 years ago[ARC] Fix decoding of w6 signed short immediate.
Claudiu Zissulescu [Mon, 23 Jul 2018 09:09:43 +0000 (11:09 +0200)]
[ARC] Fix decoding of w6 signed short immediate.

gas/
  Claudiu Zissulescu  <claziss@synopsys.com>

        * testsuite/gas/arc/st.d: Fix test.

opcodes/
  Claudiu Zissulescu  <claziss@synopsys.com>

        * arc-opc.c (extract_w6): Fix extending the sign.

6 years ago[ARC] Allow vewt instruction for ARC EM family.
Claudiu Zissulescu [Mon, 23 Jul 2018 09:09:43 +0000 (11:09 +0200)]
[ARC] Allow vewt instruction for ARC EM family.

opcode/
  Claudiu Zissulescu  <claziss@synopsys.com>

* arc-tbl.h (vewt): Allow it for ARC EM family.

6 years ago[ARC] Fix case-sensitivity for extension instructions.
claziss [Mon, 23 Jul 2018 09:09:43 +0000 (11:09 +0200)]
[ARC] Fix case-sensitivity for extension instructions.

In ARC assembler, we accept case insensitive mnemonics, but this was
not the case for extension instruction, fix it and add a test.

gas/
Claudiu Zissulescu <claziss@synopsys.com>

* config/tc-arc.c (tokenize_extinsn): Convert to lower case the
name of extension instructions.
* testsuite/gas/arc/textinsn_case.d: New file.
* testsuite/gas/arc/textinsn_case.s: Likewise.

6 years agoS/390: Suppress string diagnostics for pre-release GCC
Andreas Krebbel [Mon, 23 Jul 2018 08:29:37 +0000 (10:29 +0200)]
S/390: Suppress string diagnostics for pre-release GCC

Building for S/390 currently fails when using a GCC 8.1 pre-release
version like 8.0.1 (as it is used by F28).  Fixed with the attached patch.

bfd/ChangeLog:

2018-07-23  Andreas Krebbel  <krebbel@linux.ibm.com>

* elf32-s390.c (elf_s390_write_core_note): Make GCC version 8.0 to
be covered by the check as well.
* elf64-s390.c (elf_s390_write_core_note): Likewise.

6 years agoPowerPC64 fails reloc-discard test
Alan Modra [Mon, 23 Jul 2018 03:01:18 +0000 (12:31 +0930)]
PowerPC64 fails reloc-discard test

PowerPC64 fails here due to emitting a warning about discarded dynamic
relocations.  That's a good thing, since accidentally discarding
dynamic relocations will likely result in a non-working binary.

* testsuite/ld-elf/reloc-discard-warn.d: New.
* testsuite/ld-elf/reloc-discard.d: Skip test on PowerPC64.

6 years agopower9 mfupmc/mtupmc
Alan Modra [Mon, 23 Jul 2018 03:29:23 +0000 (12:59 +0930)]
power9 mfupmc/mtupmc

PR 23419
* ppc-opc.c (powerpc_opcodes): Add mtupmc/mfupmc/mfpmc extended
opcode variants for mtspr/mfspr encodings.

6 years agoRemove some unused variables
Simon Marchi [Mon, 23 Jul 2018 03:23:11 +0000 (23:23 -0400)]
Remove some unused variables

Found using the newly-enabled -Wunused-variable.

gdb/ChangeLog:

* aarch64-linux-nat.c
(aarch64_linux_nat_target::stopped_data_address): Remove unused
variable.
* arm-linux-nat.c (fetch_regs): Likewise.
(store_regs): Likewise.
(fetch_vfp_regs): Likewise.
(store_vfp_regs): Likewise.
(arm_linux_nat_target::insert_hw_breakpoint): Likewise.
(arm_linux_nat_target::remove_hw_breakpoint): Likewise.
(arm_linux_nat_target::insert_watchpoint): Likewise.
(arm_linux_nat_target::remove_watchpoint): Likewise.
* mips-linux-nat.c (mips_linux_nat_target::insert_watchpoint):
Likewise.
* nat/aarch64-sve-linux-ptrace.c (aarch64_sve_get_sveregs):
Likewise.
* ppc-linux-nat.c (fetch_register): Likewise.
(fetch_all_gp_regs): Likewise.
(fetch_ppc_registers): Likewise.
(store_all_gp_regs): Likewise.
(store_ppc_registers): Likewise.
(hwdebug_insert_point): Likewise.
(can_use_watchpoint_cond_accel): Likewise.
* remote-sim.c (gdb_os_write_stdout): Likewise.

gdb/gdbserver/ChangeLog:

* linux-mips-low.c (mips_collect_ptrace_register): Remove unused
variable.
(mips_supply_ptrace_register): Likewise.

6 years agoAutomatic date update in version.in
GDB Administrator [Mon, 23 Jul 2018 00:01:17 +0000 (00:01 +0000)]
Automatic date update in version.in

6 years agoAdd -Wunused-variable to warnings.m4
Tom Tromey [Mon, 9 Jul 2018 03:05:41 +0000 (21:05 -0600)]
Add -Wunused-variable to warnings.m4

This adds -Wunused-variable to the build.  This required a special
check in configure in order to work around a bug in GCC 4.9.  Simon
ound the correct test to use, so I've added him to the ChangeLog.

gdb/ChangeLog
2018-07-22  Simon Marchi  <simon.marchi@polymtl.ca>
    Tom Tromey  <tom@tromey.com>

* warning.m4 (AM_GDB_WARNINGS): Add -Wunused-variable and special
test for it.
* configure: Rebuild.

gdb/gdbserver/ChangeLog
2018-07-22  Tom Tromey  <tom@tromey.com>

* configure: Rebuild.

6 years agoConditionally define xmltarget_${name} variable in regdat.sh
Tom Tromey [Mon, 9 Jul 2018 02:31:58 +0000 (20:31 -0600)]
Conditionally define xmltarget_${name} variable in regdat.sh

This changes regdat.sh to emit the xmltarget_${name} variable inside
the #ifndef IN_PROCESS_AGENT block.  This avoids a -Wunused-variable
warning for some builds.  Thanks to Pedro for investigating this one.

gdb/ChangeLog
2018-07-22  Tom Tromey  <tom@tromey.com>

* regformats/regdat.sh: Define xmltarget_${name} inside
#ifndef IN_PROCESS_AGENT.

6 years agoRemove unused variables from gdbserver
Tom Tromey [Sun, 8 Jul 2018 18:09:22 +0000 (12:09 -0600)]
Remove unused variables from gdbserver

This removes a few unused variables from gdbserver.

The x86-tdesc.h change is a bit unusual for this series.  This file
was not defining the multiple-include guard symbol, so I've added that
here.  Also, it is hard to determine when i386_expedite_regs will be
needed, so this patch simply marks it ATTRIBUTE_UNUSED.

gdb/gdbserver/ChangeLog
2018-07-22  Tom Tromey  <tom@tromey.com>

* win32-low.c (win32_create_inferior): Remove unused variables.
* gdbreplay.c (remote_open): Remove unused variable.
* remote-utils.c (remote_prepare): Remove unused variable.
* x86-tdesc.h (X86_TDESC_H): Define.
(amd64_expedite_regs): Define conditionally.
(i386_expedite_regs): Mark ATTRIBUTE_UNUSED.
* linux-x86-tdesc.c (i386_tdescs): Move inside #if.
* remote-utils.c (readchar): Remove unused variable.

6 years agoRemove unused declaration from value.c
Tom Tromey [Sun, 8 Jul 2018 18:18:19 +0000 (12:18 -0600)]
Remove unused declaration from value.c

This removes an unused declaration from value_fetch_lazy_bitfield.
Because it is not completely clear if the check_typedef call is needed
somewhere beneath this function, this is broken out into a separate
patch.

gdb/ChangeLog
2018-07-22  Tom Tromey  <tom@tromey.com>

* value.c (value_fetch_lazy_bitfield): Remove unused variable.

6 years agoPass the correct argument to the observer in reread_symbols
Tom Tromey [Sun, 8 Jul 2018 18:18:09 +0000 (12:18 -0600)]
Pass the correct argument to the observer in reread_symbols

This is actually a patch I found via another route.  Joel had asked me
to write a test, but I still have not found the time to do this.
Meanwhile, -Wunused-variable also found this error.

gdb/ChangeLog
2018-07-22  Tom Tromey  <tom@tromey.com>

* symfile.c (reread_symbols): Notify iter, not objfile.

6 years agoFix ravenscar-thread.c to use arch_ops
Tom Tromey [Sun, 8 Jul 2018 18:17:51 +0000 (12:17 -0600)]
Fix ravenscar-thread.c to use arch_ops

The change to turn target ops into methods accidentally introduced a
bug in ravenscar-thread.c, changing some calls that were using
"arch_ops" to use the target beneath.

This patch changes ravenscar-thread.c to use these variables where
appropriate.

gdb/ChangeLog
2018-07-22  Tom Tromey  <tom@tromey.com>

* ravenscar-thread.c (ravenscar_thread_target::store_registers):
Use arch_ops.
(ravenscar_thread_target::prepare_to_store): Likewise.

6 years agoCall value_fetch_lazy when needed in pretty-printers
Tom Tromey [Sun, 8 Jul 2018 18:17:36 +0000 (12:17 -0600)]
Call value_fetch_lazy when needed in pretty-printers

This removes some unused variables, and replaces the calls to
value_contents_for_printing with a call to value_fetch_lazy, when
needed.

gdb/ChangeLog
2018-07-22  Tom Tromey  <tom@tromey.com>

* python/py-prettyprint.c (gdbpy_apply_val_pretty_printer): Remove
unused variable.  Call value_fetch_lazy when needed.
* guile/scm-pretty-print.c (gdbscm_apply_val_pretty_printer):
Remove unused variable.  Call value_fetch_lazy when needed.

6 years agoRemove declarations from m32c-tdep.c
Tom Tromey [Sun, 8 Jul 2018 18:17:23 +0000 (12:17 -0600)]
Remove declarations from m32c-tdep.c

This removes some unused declarations from m32c-tdep.c.  Initially I
had thought that this entire code block was dead, but Simon pointed
out that it is not; so this patch simply removes some declarations.

gdb/ChangeLog
2018-07-22  Tom Tromey  <tom@tromey.com>

* m32c-tdep.c (mark_dma): Return void.
(make_regs): Remove unused declarations.

6 years agoCall some functions in guile/ for effect
Tom Tromey [Sun, 8 Jul 2018 18:16:20 +0000 (12:16 -0600)]
Call some functions in guile/ for effect

This changes a couple of spots in guile/ to remove a variable
declaration but to still call a function for effect.

gdb/ChangeLog
2018-07-22  Tom Tromey  <tom@tromey.com>

* guile/scm-cmd.c (gdbscm_dont_repeat): Call
cmdscm_get_valid_command_smob_arg_unsafe for effect.
* guile/scm-block.c (gdbscm_make_block_syms_iter): Call
bkscm_get_valid_block_smob_arg_unsafe for effect.

6 years agoUse a previously unused variable in bfin-tdep.c
Tom Tromey [Sun, 8 Jul 2018 18:16:00 +0000 (12:16 -0600)]
Use a previously unused variable in bfin-tdep.c

This changes bfin_push_dummy_call to use the result of check_typedef.
Calling check_typedef for effect was probably ok as well, but this
seemed a little nicer.

gdb/ChangeLog
2018-07-22  Tom Tromey  <tom@tromey.com>

* bfin-tdep.c (bfin_push_dummy_call): Use arg_type, not
value_type.

6 years agoUnused variable fixes related to conditional compilation
Tom Tromey [Sun, 8 Jul 2018 18:39:36 +0000 (12:39 -0600)]
Unused variable fixes related to conditional compilation

This patch fixes various unused variable warnings that are related to
conditional compilation.  In these cases, either the variable is now
protected by the same #if as its uses, or the declaration is simply
lowered into the conditionally-compiled block.

gdb/ChangeLog
2018-07-22  Tom Tromey  <tom@tromey.com>

* windows-nat.c (saved_context): Conditionally define.
* remote.c (remote_target::remote_btrace_maybe_reopen):
Conditionally declare "warned".
* inflow.c (sigquit_ours): Conditionally define.
(new_tty): Move "tty" declaration inside #if.
* guile/guile.c (guile_datadir): Conditionally define.
* charset.c (set_be_le_names): Move some declarations inside #if.
* btrace.c (parse_xml_btrace): Move "errcode" declaration inside
#if.
(parse_xml_btrace_conf): Likewise.

6 years agoRemove an unused variable from spu_get_overlay_table
Tom Tromey [Mon, 16 Jul 2018 15:33:42 +0000 (09:33 -0600)]
Remove an unused variable from spu_get_overlay_table

This removes an unused variable from spu_get_overlay_table, replacing
it with an explanatory comment.

gdb/ChangeLog
2018-07-22  Tom Tromey  <tom@tromey.com>

* spu-tdep.c (spu_get_overlay_table): Remove unused variable.

6 years agoSimple unused variable removals
Tom Tromey [Sun, 8 Jul 2018 18:15:04 +0000 (12:15 -0600)]
Simple unused variable removals

This patch holds all the straightforward unused variable deletions.

gdb/ChangeLog
2018-07-22  Tom Tromey  <tom@tromey.com>

* guile/scm-value.c (gdbscm_value_call): Remove unused variables.
* guile/scm-math.c (vlscm_unop_gdbthrow, vlscm_binop_gdbthrow)
(vlscm_convert_typed_value_from_scheme): Remove unused variable.
* buildsym-legacy.c (get_macro_table): Remove unused variable.
* stack.c (frame_apply_level_command): Remove unused variable.
* tic6x-tdep.c (tic6x_push_dummy_call): Remove unused variable.
* sparc64-tdep.c (adi_examine_command): Remove unused variable.
* rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call): Remove
unused variable.
* nios2-tdep.c (nios2_push_dummy_call): Remove unused variable.
* mep-tdep.c (mep_push_dummy_call): Remove unused variable.
* ada-lang.c (ada_lookup_symbol_list_worker): Remove unused
variable.
* amd64-tdep.c (amd64_supply_xsave): Remove unused variable.
* arm-tdep.c (arm_record_data_proc_misc_ld_str): Remove unused
variable.
* breakpoint.c (check_no_tracepoint_commands, update_watchpoint):
Remove unused variable.
* cli/cli-script.c (recurse_read_control_structure): Remove unused
variable.
* common/tdesc.c (print_xml_feature::visit): Remove unused
variable.
* compile/compile-object-load.c (store_regs): Remove unused
variables.
* complaints.c (clear_complaints): Remove unused variable.
* corelow.c (core_target_open): Remove unused variable.
* fbsd-tdep.c (fbsd_core_info_proc_status): Remove unused
variable.
* guile/scm-frame.c (gdbscm_frame_read_var): Remove unused
variable.
* guile/scm-symtab.c (stscm_print_sal_smob): Remove unused
variable.
* guile/scm-type.c (gdbscm_field_baseclass_p): Remove unused
variable.
* guile/scm-utils.c (gdbscm_parse_function_args): Remove unused
variable.
* hppa-tdep.c (hppa_stub_frame_unwind_cache): Remove unused
variable.
* ia64-tdep.c (examine_prologue): Remove unused variable.
* infcall.c (run_inferior_call): Remove unused variable.
* inferior.c (exit_inferior): Remove unused variable.
* infrun.c (infrun_thread_ptid_changed): Remove unused variable.
* linespec.c (decode_line_2): Remove unused variable.
* linux-nat.c (super_close): Remove.
* linux-tdep.c (linux_info_proc): Remove unused variable.
* mi/mi-main.c (mi_execute_command): Remove unused variable.
* microblaze-linux-tdep.c (microblaze_linux_sigtramp_cache):
Remove unused variable.
* parse.c (find_minsym_type_and_address): Remove unused variable.
* printcmd.c (info_symbol_command, printf_floating): Remove unused
variable.
* python/py-breakpoint.c (bppy_set_commands): Remove unused
variable.
* python/py-unwind.c (unwind_infopy_dealloc): Remove unused
variables.
* record-btrace.c (record_btrace_target::store_registers): Remove
unused variable.
(cmd_show_record_btrace_cpu): Remove unused variable.
* riscv-tdep.c (riscv_register_reggroup_p)
(riscv_push_dummy_call, riscv_return_value): Remove unused
variable.
* rust-exp.y (literal): Remove unused variable.
* rust-lang.c (rust_evaluate_subexp) <OP_RUST_ARARAY>: Remove
unused variable.
<STRUCTOP_ANONYMOUS>: Likewise.
* s390-linux-tdep.c (s390_linux_init_abi_31)
(s390_linux_init_abi_64): Remove unused variable.
* ser-ming2.c (ser_windows_read_prim, pipe_select_thread)
(file_select_thread, net_windows_open, _initialize_ser_windows):
Remove unused variables.
* symtab.c (find_pc_sect_line): Remove unused variable.
* target-memory.c (compute_garbled_blocks): Remove unused
variable.
(target_write_memory_blocks): Remove unused variable.
* target.c (target_stack::unpush): Remove unused variables.
* tracepoint.c (start_tracing, all_tracepoint_actions)
(merge_uploaded_trace_state_variables)
(print_one_static_tracepoint_marker): Remove unused variable.
* unittests/basic_string_view/element_access/char/1.cc (test01):
Remove unused variable.
* windows-nat.c (windows_continue, windows_add_all_dlls)
(do_initial_windows_stuff, windows_nat_target::create_inferior):
Remove unused variables.

6 years agox86: Determine vector length from the last vector operand
H.J. Lu [Sun, 22 Jul 2018 19:00:39 +0000 (12:00 -0700)]
x86: Determine vector length from the last vector operand

Determine VEX/EVEXE vector length from the last multi-length vector
operand.

* config/tc-i386.c (build_vex_prefix): Determine vector
length from the last multi-length vector operand.
(build_evex_prefix): Likewise.

6 years agoFix -Wunused-variable warnings related to conditional compilation
Simon Marchi [Sun, 22 Jul 2018 02:21:57 +0000 (22:21 -0400)]
Fix -Wunused-variable warnings related to conditional compilation

Some variables are not used when !HAVE_ELF, so avoid declaring them in
that case.

gdb/ChangeLog:

* arm-tdep.c (arm_gdbarch_init): Declare attr_arch and
attr_profile in HAVE_ELF.
* rs6000-tdep.c (bfd_uses_spe_extensions): Declare vector_abi in
HAVE_ELF.

6 years agoAutomatic date update in version.in
GDB Administrator [Sun, 22 Jul 2018 00:01:12 +0000 (00:01 +0000)]
Automatic date update in version.in

6 years agogas/config/tc-i386.c: Break long line
H.J. Lu [Sat, 21 Jul 2018 17:57:54 +0000 (10:57 -0700)]
gas/config/tc-i386.c: Break long line

* config/tc-i386.c (match_simd_size): Break long line.
(match_mem_size): Likewise.

6 years agoInitialize GOT slot for local symbol in non-PIC link.
Eric Botcazou [Sat, 21 Jul 2018 13:00:40 +0000 (15:00 +0200)]
Initialize GOT slot for local symbol in non-PIC link.

On ARM/VxWorks 7, the R_ARM_TARGET2 relocation used for exception handling
is R_ARM_GOT_PREL; moreover in Ada you can define local exceptions. In this
case, you may end up with a GOT relocation against a local symbol in a
non-PIC link and the ARM linker leaves the GOT slot uninitialized, unlike
for example the i386 or the SPARC linkers in the same situation.

bfd/
* elf32-arm.c (elf32_arm_final_link_relocate) <R_ARM_GOT32>: Small
cleanup for the case of a global symbol that binds locally.  Also
install a value in the GOT slot in the case of a local symbol in
a non-PIC link.

6 years agoRename some frame unwind function parameters
Simon Marchi [Sat, 21 Jul 2018 02:19:04 +0000 (22:19 -0400)]
Rename some frame unwind function parameters

I am currently working with these functions, and though this renaming
could help to reason about the code.  Some functions take a frame and
will return the value associated to that frame, others will return the
value associated to the previous frame.  Those usually conveniently
contain "unwind" in their name, but naming the variable next_frame
instead of frame helps remembering which frame we are dealing with.

I also included a little typo fix at the top of frame.h.

gdb/ChangeLog:

* frame.c (frame_register_unwind): Change parameter name.
(frame_unwind_register): Likewise.
(frame_unwind_register_value): Likewise.
(frame_unwind_register_signed): Likewise.
(frame_unwind_register_unsigned): Likewise.
* frame.h (frame_register_unwind): Likewise.
(frame_unwind_register): Likewise.
(frame_unwind_register_value): Likewise.
(frame_unwind_register_signed): Likewise.
(frame_unwind_register_unsigned): Likewise.
(frame_unwind_arch): Likewise.

6 years agoAutomatic date update in version.in
GDB Administrator [Sat, 21 Jul 2018 00:00:33 +0000 (00:00 +0000)]
Automatic date update in version.in

6 years agoUpdate my e-mail address, limit maintenance to MIPS I-IV ISAs
Maciej W. Rozycki [Fri, 20 Jul 2018 23:14:01 +0000 (00:14 +0100)]
Update my e-mail address, limit maintenance to MIPS I-IV ISAs

binutils/
* MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
ISA maintenance.

gdb/
* MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
ISA maintenance.

sim/
* MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
ISA maintenance.

6 years agox86: Rename match_reg_size to match_operand_size
H.J. Lu [Fri, 20 Jul 2018 19:47:25 +0000 (12:47 -0700)]
x86: Rename match_reg_size to match_operand_size

match_reg_size checks size for both memory and register operands.  This
patch renamed match_reg_size to match_operand_size and updated comments
for

commit 3ac21baa8498d3aa9951f79e2c3336d532eeff7b
Author: Jan Beulich <jbeulich@novell.com>
Date:   Mon Jul 16 08:19:21 2018 +0200

    x86: fix operand size checking

which added one argument to match_reg_size, match_simd_size and
match_mem_size.

* config/tc-i386.c (match_reg_size): Renamed to ...
(match_operand_size): This.  Update comments.
(match_simd_size): Update comments.  Replace match_reg_size
with match_operand_size.
(match_mem_size): Likewise.
(operand_size_match): Replace match_reg_size with
match_operand_size.

6 years agold: Discard .rel.* and .rela.* sections
H.J. Lu [Fri, 20 Jul 2018 16:52:35 +0000 (09:52 -0700)]
ld: Discard .rel.* and .rela.* sections

On many targets, like x86, .rel.dyn/.rela.dyn section is combined from
different .rel/.rela sections by -z combreloc.  To discard dynamic
relocation section, we need to discard .rel.* and .rela.* sections
instead of .rel.dyn and .rela.dyn sections.

Note: This test fails for targets which issue a warning when dynamic
section is discarded.

* testsuite/ld-elf/reloc-discard.ld: Discard .rel.* and .rela.*
sections instead of .rel.dyn and .rela.dyn sections.

6 years agoMIPS/Linux/native: Convert to `get_ptrace_pid' for PID extraction
Maciej W. Rozycki [Fri, 20 Jul 2018 16:28:08 +0000 (17:28 +0100)]
MIPS/Linux/native: Convert to `get_ptrace_pid' for PID extraction

Use `get_ptrace_pid' to get the ptrace PID from `inferior_ptid' rather
than extracting it by hand.

gdb/
* mips-linux-nat.c (mips_linux_nat_target::read_description):
Call `get_ptrace_pid' rather than extracting the ptrace PID by
hand.

6 years agox86: Add a GNU_PROPERTY_X86_ISA_1_USED note if needed
H.J. Lu [Fri, 20 Jul 2018 16:18:47 +0000 (09:18 -0700)]
x86: Add a GNU_PROPERTY_X86_ISA_1_USED note if needed

When -z separate-code, which is enabled by default for Linux/x86, is
used to create executable, ld won't place any data in the code-only
PT_LOAD segment.  If there are no data sections placed before the
code-only PT_LOAD segment, the program headers won't be mapped into
any PT_LOAD segment.  When the executable tries to access it (based
on the program header address passed in AT_PHDR), it will lead to
segfault.  This patch inserts a GNU_PROPERTY_X86_ISA_1_USED note if
there may be no data sections before the text section so that the
first PT_LOAD segment won't be code-only and will contain the program
header.

Testcases are adjusted to either pass "-z noseparate-code" to ld or
discard the .note.gnu.property section.  A Linux/x86 run-time test is
added.

bfd/

PR ld/23428
* elfxx-x86.c (_bfd_x86_elf_link_setup_gnu_properties): If the
separate code program header is needed, make sure that the first
read-only PT_LOAD segment has no code by adding a
GNU_PROPERTY_X86_ISA_1_USED note.

ld/

PR ld/23428
* testsuite/ld-elf/linux-x86.S: New file.
* testsuite/ld-elf/linux-x86.exp: Likewise.
* testsuite/ld-elf/pr23428.c: Likewise.
* testsuite/ld-elf/sec64k.exp: Pass "-z noseparate-code" to ld
for Linux/x86 targets.
* testsuite/ld-i386/abs-iamcu.d: Likewise.
* testsuite/ld-i386/abs.d: Likewise.
* testsuite/ld-i386/pr12718.d: Likewise.
* testsuite/ld-i386/pr12921.d: Likewise.
* testsuite/ld-x86-64/abs-k1om.d: Likewise.
* testsuite/ld-x86-64/abs-l1om.d: Likewise.
* testsuite/ld-x86-64/abs.d: Likewise.
* testsuite/ld-x86-64/pr12718.d: Likewise.
* testsuite/ld-x86-64/pr12921.d: Likewise.
* testsuite/ld-linkonce/zeroeh.ld: Discard .note.gnu.property
section.
* testsuite/ld-scripts/print-memory-usage.t: Likewise.
* testsuite/ld-scripts/size-2.t: Likewise.
* testsuite/lib/ld-lib.exp (run_ld_link_exec_tests): Use ld
to create executable if language is "asm".

6 years agoRename remaining members of buildsym_compunit to start with "m_"
Keith Seitz [Sun, 8 Jul 2018 16:19:10 +0000 (10:19 -0600)]
Rename remaining members of buildsym_compunit to start with "m_"

This renames all the remaining members of buildsym_compunit to start
with "m_" to follow the general naming convention.

gdb/ChangeLog
2018-07-20  Keith Seitz  <keiths@redhat.com>

* buildsym.h (struct buildsym_compunit) <m_objfile, m_subfiles,
m_main_subfile, m_comp_dir, m_producer, m_debugformat,
m_compunit_symtab, m_language>: Add "m_" prefix.
Update all uses.
* buildsym.c: Update all uses.

6 years agoRemove record_line_ftype
Tom Tromey [Wed, 23 May 2018 04:47:15 +0000 (22:47 -0600)]
Remove record_line_ftype

The record_line_ftype typedef was only used in the DWARF reader, and
we removed those uses a few patches ago.  So, remove the typedef.

gdb/ChangeLog
2018-07-20  Tom Tromey  <tom@tromey.com>

* buildsym-legacy.h (record_line): Don't use record_line_ftype.
* buildsym.h (record_line_ftype): Remove typedef.

6 years agoRemove some unused buildsym functions
Tom Tromey [Wed, 23 May 2018 04:44:44 +0000 (22:44 -0600)]
Remove some unused buildsym functions

Now that the DWARF reader uses the builder-based API, we can remove a
few "legacy" functions that were only ever called by it.

gdb/ChangeLog
2018-07-20  Tom Tromey  <tom@tromey.com>

* buildsym-legacy.h (augment_type_symtab): Don't declare.
(end_expandable_symtab): Likewise.
(end_symtab_get_static_block): Likewise.
(end_symtab_from_static_block): Likewise.
* buildsym-legacy.c (augment_type_symtab): Remove.
(end_expandable_symtab): Remove.
(end_symtab_get_static_block): Remove.
(end_symtab_from_static_block): Remove.

6 years agoConvert the DWARF reader to new-style buildysm
Tom Tromey [Tue, 22 May 2018 21:22:53 +0000 (15:22 -0600)]
Convert the DWARF reader to new-style buildysm

This converts the DWARF reader to use the new-style buildsym API.  A
new buildsym_compunit is created for each CU and is used to construct
the symbol table.  In some cases the CU must be passed to functions
which previously did not accept it.  FWIW I tend to think that most
methods in the DWARF reader ought to be methods on the dwarf2_cu
object.

gdb/ChangeLog
2018-07-20  Tom Tromey  <tom@tromey.com>

* dwarf2read.c: Include buildsym.h.
(struct dwarf2_cu) <builder>: New method.
(fixup_go_packaging): Update.
(process_full_comp_unit, process_full_type_unit): Update.  Don't
use scoped_free_pendings.
(using_directives): Add "cu" parameter, remove "language".
(read_import_statement, setup_type_unit_groups, )
(read_func_scope, read_lexical_block_scope)
(dwarf2_record_block_ranges, read_namespace): Update.
(lnp_state_machine::lnp_state_machine): Add cu parameter.
(lnp_state_machine::handle_end_sequence): Update.
(class lnp_state_machine) <m_cu>: New member.
<m_record_line_callback>: Remove.
<m_currently_recording_lines>: New member.
(lnp_state_machine::handle_set_file): Update.
(noop_record_line): Remove.
(dwarf_record_line_p): Add cu parameter.
(dwarf_record_line_1, dwarf_finish_line): Likewise.
(lnp_state_machine::record_line)
(lnp_state_machine::lnp_state_machine)
(lnp_state_machine::check_line_address, dwarf_decode_lines_1)
(dwarf_decode_lines): Update.
(dwarf2_start_subfile): Add cu parameter.
(dwarf2_start_symtab, new_symbol): Update.
(macro_start_file, dwarf_decode_macro_bytes): Add cu parameter.
Remove dwarf2_per_objfile parameter.
(dwarf_decode_macros): Update.

6 years agoParameterize cp_scan_for_anonymous_namespaces
Tom Tromey [Tue, 22 May 2018 20:44:09 +0000 (14:44 -0600)]
Parameterize cp_scan_for_anonymous_namespaces

This changes cp_scan_for_anonymous_namespaces to use the
buildsym_compunit API, rather than the function-based API.

gdb/ChangeLog
2018-07-20  Tom Tromey  <tom@tromey.com>

* stabsread.c (define_symbol): Update.
* buildsym-legacy.h (get_buildsym_compunit): Declare.
* dwarf2read.c (new_symbol): Update.
* cp-support.h (cp_scan_for_anonymous_namespaces): Update.
* cp-namespace.c: Include buildsym.h.
(cp_scan_for_anonymous_namespaces): Add "compunit" parameter.
* buildsym-legacy.c (get_buildsym_compunit): New function.

6 years agoIntroduce buildsym-legacy.h
Tom Tromey [Tue, 22 May 2018 20:39:24 +0000 (14:39 -0600)]
Introduce buildsym-legacy.h

This introduces a new header, buildsym-legacy.h, and changes all the
symbol readers to use it.  The idea is to put the function-based
interface, that relies on the buildsym_compunit global, into a
separate header.  Then when a symbol reader is updated to use the new
interface, it can simply not include buildsym-legacy.h, so it's easy
to be sure that the new API is used everywhere.

gdb/ChangeLog
2018-07-20  Tom Tromey  <tom@tromey.com>

* xcoffread.c: Include buildsym-legacy.h.
* windows-nat.c: Include buildsym-legacy.h.
* stabsread.c: Include buildsym-legacy.h.
* mdebugread.c: Include buildsym-legacy.h.
* buildsym-legacy.h: New file.
* buildsym-legacy.c: New file, from buildsym.c.
* go32-nat.c: Include buildsym-legacy.h.
* dwarf2read.c: Include buildsym-legacy.h.
* dbxread.c: Include buildsym-legacy.h.
* cp-namespace.c: Include buildsym-legacy.h.
* coffread.c: Include buildsym-legacy.h.
* buildsym.h: Move some contents to buildsym-legacy.h.
* buildsym.c: Include buildsym-legacy.h.  Move many functions to
buildsym-legacy.c.
* Makefile.in (HFILES_NO_SRCDIR): Add buildsym-legacy.h.

6 years agoMove struct buildsym_compunit to buildsym.h
Tom Tromey [Tue, 22 May 2018 20:27:43 +0000 (14:27 -0600)]
Move struct buildsym_compunit to buildsym.h

This moves struct buildsym_compunit to buildsym.h.  Now that the
members are private, and it no longer affects any global state in
buildsym.c, an instance can be used directly for symtab creation.

gdb/ChangeLog
2018-07-20  Tom Tromey  <tom@tromey.com>

* buildsym.h (struct buildsym_compunit): Move from buildsym.c.
* buildsym.c (struct buildsym_compunit): Move to buildsym.h.
(buildsym_compunit::buildsym_compunit)
(buildsym_compunit::~buildsym_compunit)
(buildsym_compunit::get_macro_table): Define.

6 years agoRemove reset_symtab_globals
Tom Tromey [Tue, 22 May 2018 20:23:32 +0000 (14:23 -0600)]
Remove reset_symtab_globals

This patch arranges for the remaining buildsym global --
buildsym_compunit -- to only be cleared by the wrapper functions, not
by methods on struct buildsym_compunit.  In the process,
reset_symtab_globals is removed.

gdb/ChangeLog
2018-07-20  Tom Tromey  <tom@tromey.com>

* buildsym.c (reset_symtab_globals): Remove.
(buildsym_compunit::end_symtab_from_static_block): Update.
(buildsym_compunit::augment_type_symtab): Update.
(end_symtab_from_static_block): Call free_buildsym_compunit.
(augment_type_symtab, end_symtab, end_expandable_symtab):
Likewise.

6 years agoDo not use buildsym.h in some files
Tom Tromey [Tue, 22 May 2018 20:13:46 +0000 (14:13 -0600)]
Do not use buildsym.h in some files

A few files no longer need to include buildsym.h.

gdb/ChangeLog
2018-07-20  Tom Tromey  <tom@tromey.com>

* arch-utils.c: Do not include buildsym.h.
* mipsread.c: Do not include buildsym.h.
* machoread.c: Do not include buildsym.h.
* elfread.c: Do not include buildsym.h.

6 years agoAdd many methods to buildsym_compunit
Tom Tromey [Mon, 21 May 2018 15:29:29 +0000 (09:29 -0600)]
Add many methods to buildsym_compunit

This adds many methods to buildsym_compunit and makes the data members
private.  Essentially the entire buildsym API is now available as a
method on buildsym_compunit.  However, standalone functions are still
provided, as this is what the sybmol readers actually use.

gdb/ChangeLog
2018-07-20  Tom Tromey  <tom@tromey.com>

* buildsym.c (buildsym_compunit::buildsym_compunit): Do more
initialization.
(buildsym_compunit): Add new constructor.
(struct buildsym_compunit) <get_last_source_file, finish_block,
record_block_range, start_subfile, patch_subfile_names,
push_subfile, pop_subfile, record_line, get_compunit_symtab,
set_last_source_start_addr, get_last_source_start_addr,
get_local_using_directives, set_local_using_directives,
get_global_using_directives, outermost_context_p,
get_current_context_stack, get_context_stack_depth,
get_current_subfile, get_local_symbols, get_file_symbols,
get_global_symbols, record_debugformat, record_producer,
push_context, pop_context, end_symtab_get_static_block,
end_symtab_from_static_block, end_symtab, end_expandable_symtab>:
New public methods.
<record_pending_block, finish_block_internal, make_blockvector,
watch_main_source_file_lossage, end_symtab_with_blockvector>: New
private methods.
Update all users.

6 years agoRemove parameter from record_pending_block
Tom Tromey [Thu, 12 Jul 2018 04:55:17 +0000 (22:55 -0600)]
Remove parameter from record_pending_block

This removes a redundant parameter from record_pending_block.  It also
moves record_pending_block earlier in the file, so that a forward
declaration is no longer needed.

gdb/ChangeLog
2018-07-20  Tom Tromey  <tom@tromey.com>

* buildsym.c (record_pending_block): Move earlier.  Remove objfile
parameter.
(finish_block_internal): Update.

6 years agoRemove EXTERN from buildsym.h
Tom Tromey [Mon, 21 May 2018 15:21:18 +0000 (09:21 -0600)]
Remove EXTERN from buildsym.h

Nothing in buildsym.h relies on the "EXTERN" method of
declaration/definition, so remove the traces.

gdb/ChangeLog
2018-07-20  Tom Tromey  <tom@tromey.com>

* buildsym.h (EXTERN): Don't define or undef.
* buildsym.c (EXTERN): Don't define.

6 years agoRemove a TODO
Tom Tromey [Mon, 21 May 2018 15:20:31 +0000 (09:20 -0600)]
Remove a TODO

This removes a TODO comment -- the work has been done.

gdb/ChangeLog
2018-07-20  Tom Tromey  <tom@tromey.com>

* buildsym.c: Remove TODO comment.

6 years agoRemove buildsym_init
Tom Tromey [Mon, 21 May 2018 15:16:16 +0000 (09:16 -0600)]
Remove buildsym_init

Now that buildsym_init does nothing, it can be removed.

gdb/ChangeLog
2018-07-20  Tom Tromey  <tom@tromey.com>

* coffread.c (coff_symtab_read): Update.
* xcoffread.c (xcoff_psymtab_to_symtab_1): Update.
(xcoff_new_init): Update.
* mipsread.c (mipscoff_new_init): Update.
* mdebugread.c (mdebug_build_psymtabs): Update.
* elfread.c (elf_new_init): Update.
* dwarf2read.c (process_full_comp_unit, process_full_type_unit):
Update.
* dbxread.c (dbx_new_init, dbx_psymtab_to_symtab_1)
(coffstab_build_psymtabs, elfstab_build_psymtabs)
(stabsect_build_psymtabs): Update.
* buildsym.h (buildsym_init): Don't declare.
* buildsym.c: Update comment.
(prepare_for_building): Remove.
(start_symtab, restart_symtab): Update.
(reset_symtab_globals): Update comment.
(buildsym_init): Remove.

6 years agoMove the symbol lists to buildsym_compunit
Tom Tromey [Mon, 21 May 2018 15:12:54 +0000 (09:12 -0600)]
Move the symbol lists to buildsym_compunit

This moves the global symbol lists into buildsym_compunit, adds
accessors, and updates all the users.

gdb/ChangeLog
2018-07-20  Tom Tromey  <tom@tromey.com>

* xcoffread.c (read_xcoff_symtab, process_xcoff_symbol): Update.
* stabsread.c (patch_block_stabs, define_symbol, read_type)
(read_enum_type, common_block_start, common_block_end)
(cleanup_undefined_types_1, finish_global_stabs): Update.
* mdebugread.c (psymtab_to_symtab_1): Update.
* dwarf2read.c (fixup_go_packaging, read_func_scope)
(read_lexical_block_scope, new_symbol): Update.
* dbxread.c (process_one_symbol): Update.
* coffread.c (coff_symtab_read, process_coff_symbol)
(coff_read_enum_type): Update.
* buildsym.h (file_symbols, global_symbols, local_symbols): Don't
declare.
(get_local_symbols, get_file_symbols, get_global_symbols): New
functions.
* buildsym.c (~buildsym_compunit): Clean up m_file_symbols and
m_global_symbols.
<m_file_symbols, m_local_symbols, m_global_symbols>: New members.
(~scoped_free_pendings): Update.
(finish_block, prepare_for_building, reset_symtab_globals)
(end_symtab_get_static_block, end_symtab_with_blockvector)
(augment_type_symtab, push_context): Update.
(get_local_symbols, get_file_symbols, get_global_symbols): New
functions.
(buildsym_init): Update.

6 years agoSet list_in_scope later in DWARF reader
Tom Tromey [Tue, 22 May 2018 05:30:47 +0000 (23:30 -0600)]
Set list_in_scope later in DWARF reader

Currently the DWARF reader sets the list_in_scope member of the CU
when first starting to process symbols.  Future changes will make this
assert -- code will not be able to refer to these lists until after
start_symtab has been called.  This patch prepares for the problem by
arranging to initialize list_in_scope in dwarf2_start_symtab.

gdb/ChangeLog
2018-07-20  Tom Tromey  <tom@tromey.com>

* dwarf2read.c (process_full_comp_unit): Do not set list_in_scope.
(process_full_type_unit): Likewise.
(dwarf2_start_symtab): Set list_in_scope.

6 years agoDo not look at file symbols when reading psymtabs
Tom Tromey [Tue, 22 May 2018 05:23:02 +0000 (23:23 -0600)]
Do not look at file symbols when reading psymtabs

The DWARF reader was setting the list_in_scope member when reading
partial symbols.  however, this member is only useful when reading
full symbols.  Future patches will make this assert, so remove these
unneeded initializations.

gdb/ChangeLog
2018-07-20  Tom Tromey  <tom@tromey.com>

* dwarf2read.c (process_psymtab_comp_unit_reader)
(build_type_psymtabs_reader): Do not set list_in_scope.

6 years agoRemove free_pendings
Tom Tromey [Mon, 21 May 2018 14:35:43 +0000 (08:35 -0600)]
Remove free_pendings

buildsym.c currently keeps a free list of "struct pending"s.  However,
this didn't seem necessary to me, and so this patch removes the free
list.

gdb/ChangeLog
2018-07-20  Tom Tromey  <tom@tromey.com>

* buildsym.c (free_pendings): Remove.
(add_symbol_to_list, scoped_free_pendings)
(finish_block_internal, buildsym_init): Update.

6 years agoRemove the "listhead" argument from finish_block
Tom Tromey [Mon, 21 May 2018 06:41:21 +0000 (00:41 -0600)]
Remove the "listhead" argument from finish_block

finish_block is only ever called with "&local_symbols" as the
"listhead" argument.  So, remove this argument.

gdb/ChangeLog
2018-07-20  Tom Tromey  <tom@tromey.com>

* xcoffread.c (read_xcoff_symtab): Update.
* dwarf2read.c (read_func_scope, read_lexical_block_scope):
Update.
* dbxread.c (process_one_symbol): Update.
* coffread.c (coff_symtab_read): Update.
* buildsym.h (finish_block): Update.
* buildsym.c (finish_block): Remove "listhead" argument.
(end_symtab_get_static_block): Update.

6 years agoMove pending_blocks and pending_block_obstack to buildsym_compunit
Tom Tromey [Mon, 21 May 2018 06:34:26 +0000 (00:34 -0600)]
Move pending_blocks and pending_block_obstack to buildsym_compunit

This moves the pending_blocks and pending_block_obstack into
buildsym_compunit.

The obstack could perhaps be merged with the addrmap obstack, but I
did not do that in this series.

gdb/ChangeLog
2018-07-20  Tom Tromey  <tom@tromey.com>

* buildsym.h (class scoped_free_pendings): Remove constructor.
* buildsym.c (struct buildsym_compunit) <free_pending_blocks>: New
method.
<m_pending_block_obstack, m_pending_blocks>: New members.
(pending_block_obstack, pending_blocks): Remove.
(scoped_free_pendings::scoped_free_pendings): Default.
(~scoped_free_pendings): Update.
(free_pending_blocks): Remove.
(finish_block_internal, record_pending_block, make_blockvector)
(end_symtab_get_static_block, augment_type_symtab, push_context)
(buildsym_init): Update.

6 years agoMove pending addrmap globals to buildsym_compunit
Tom Tromey [Mon, 21 May 2018 06:28:56 +0000 (00:28 -0600)]
Move pending addrmap globals to buildsym_compunit

This moves the pending addrmap-related globals into buildsym_compunit.

gdb/ChangeLog
2018-07-20  Tom Tromey  <tom@tromey.com>

* buildsym.c (struct buildsym_compunit) <m_pending_addrmap,
m_pending_addrmap_obstack, m_pending_addrmap_interesting>: New
members.
(pending_addrmap, pending_addrmap_obstack)
(pending_addrmap_interesting): Remove.
(scoped_free_pendings, record_block_range, make_blockvector)
(prepare_for_building, reset_symtab_globals, buildsym_init):
Update.

6 years agoMove current_subfile to buildsym_compunit
Tom Tromey [Mon, 21 May 2018 06:15:12 +0000 (00:15 -0600)]
Move current_subfile to buildsym_compunit

This moves the global current_subfile into buildsym_compunit.

gdb/ChangeLog
2018-07-20  Tom Tromey  <tom@tromey.com>

* xcoffread.c (process_linenos): Update.
* stabsread.c (define_symbol, read_type, read_enum_type): Update.
* mdebugread.c (psymtab_to_symtab_1): Update.
* dwarf2read.c (setup_type_unit_groups)
(lnp_state_machine::handle_set_file, dwarf_record_line_p)
(lnp_state_machine::record_line, dwarf_decode_lines): Update.
* dbxread.c (process_one_symbol): Update.
* coffread.c (coff_symtab_read, enter_linenos)
(process_coff_symbol): Update.
* buildsym.h (current_subfile): Don't declare.
(get_current_subfile): Declare.
* buildsym.c (struct buildsym_compunit) <m_current_subfile>: New
member.
(start_subfile, free_buildsym_compunit, push_subfile)
(prepare_for_building, start_symtab): Update.
(get_current_subfile): New function.

6 years agoMove the context stack to buildsym_compunit
Tom Tromey [Mon, 21 May 2018 05:58:35 +0000 (23:58 -0600)]
Move the context stack to buildsym_compunit

This moves the context stack globals to be members of
buildsym_compunit, changing the type to a std::vector in the process.

Because the callers expect the context stack object to be valid after
being popped, at Simon's suggestion I've changed pop_context to return
the object rather than the pointer.

gdb/ChangeLog
2018-07-20  Tom Tromey  <tom@tromey.com>

* coffread.c (coff_symtab_read): Update.
* xcoffread.c (read_xcoff_symtab): Update.
* dwarf2read.c (new_symbol): Update.
(read_func_scope, read_lexical_block_scope): Update.
* dbxread.c (process_one_symbol): Update.
* buildsym.h (context_stack, context_stack_depth): Don't declare.
(outermost_context_p): Remove macro.
(outermost_context_p, get_current_context_stack)
(get_context_stack_depth): Declare.
(pop_context): Return struct context_stack.
* buildsym.c (struct buildsym_compunit) <m_context_stack: New
member.
(context_stack_size): Remove.
(INITIAL_CONTEXT_STACK_SIZE): Remove.
(prepare_for_building, end_symtab_get_static_block)
(augment_type_symtab, push_context): Update.
(pop_context): Return struct context_stack.
(outermost_context_p, get_current_context_stack)
(get_context_stack_depth): New functions.
(buildsym_init): Update.

6 years agoMake the Rust parser pure
Tom Tromey [Sat, 2 Jun 2018 04:20:23 +0000 (22:20 -0600)]
Make the Rust parser pure

This makes the Rust parser a pure parser and removes all the
(non-constant) globals from rust-exp.y.  This seemed like a nice
simplification to me and I think it should probably be applied to all
the parsers.  Perhaps it would be good to go even one step farther and
have all parsers derive from parser_state.

Tested on x86-64 Fedora 26.

gdb/ChangeLog
2018-07-20  Tom Tromey  <tom@tromey.com>

* rust-exp.y: Now a pure parser.  Update all rules.
(%union): Move earlier.
(current_parser, work_obstack): Remove globals.
(rust_parser, ~rust_parser): Update.
(class rust_parser) <copy_name, concat3, crate_name, super_name,
lex_character, lex_number, lex_string, lex_identifier,
rust_lookup_type, convert_params_to_types, convert_ast_to_type,
convert_name, convert_params_to_expression,
convert_ast_to_expression, ast_basic_type, ast_operation,
ast_compound_assignment, rust_op, ast_literal, ast_dliteral,
ast_structop, ast_structop_anonymous, ast_unary, ast_cast,
ast_call_ish, ast_path, ast_string, ast_struct, ast_range,
ast_array_type, ast_slice_type, ast_reference_type,
ast_pointer_type, ast_function_type, ast_tuple_type>: New methods.
(rust_parse): Update.
(rustyyerror, rustyylex): Add parser parameter.
(rust_lex_test_one, rust_lex_int_test, rust_lex_exception_test)
(rust_lex_stringish_test, rust_lex_test_sequence)
(rust_lex_test_trailing_dot, rust_lex_test_completion)
(rust_lex_test_push_back, rust_lex_tests): Update.

6 years ago[PATCH, LD, AArch64] Fix ifunc testisms
Andre Simoes Dias Vieira [Thu, 19 Jul 2018 15:18:28 +0000 (16:18 +0100)]
[PATCH, LD, AArch64] Fix ifunc testisms

This patch fixes some ifunc testisms after H.J. Lu's patch to enable the
use of IFUNC pointers in position dependent code for binutils. See PR
LD/23169 in binutils bugzilla.

The aarch64 ifunc error message test was changed to no longer expect
this error message as this is now an accepted combination. This patch
also disables the executable tests added by H.J. Lu for aarch64, just as
Alan Modra did with his patch, as these tests only seem to work on some
architectures.

ld/ChangeLog:
2018-07-19  Andre Vieira  <andre.simoesdiasvieira@arm.com>

* testsuite/ld-aarch64/ifunc-9.d: Remove no longer expected error.
* testsuite/ld-ifunc/ifunc.exp: Disable tests for aarch64.

6 years ago[gdb/testsuite] Make noclone conditional in vla-optimized-out.c
Tom de Vries [Fri, 20 Jul 2018 14:40:10 +0000 (16:40 +0200)]
[gdb/testsuite] Make noclone conditional in vla-optimized-out.c

Make the noclone attribute on f1 in vla-optimized-out.c conditional.  This
makes the test-case by default identical to
gcc/testsuite/gcc.dg/guality/vla-1.c.

Tested on x86_64-linux.

2018-07-20  Tom de Vries  <tdevries@suse.de>

* gdb.base/vla-optimized-out.c: Make noclone attribute conditional on
NOCLONE macro.
* gdb.base/vla-optimized-out.exp: Use additional_flags -DNOCLONE.

6 years agoClose memory and resource leaks detected by coverity in the binutils directory.
Nick Clifton [Fri, 20 Jul 2018 14:05:34 +0000 (15:05 +0100)]
Close memory and resource leaks detected by coverity in the binutils directory.

* objcopy.c (add_specific_symbols): Free buffer on exit.
(add_redefine_syms_file): Close file handle on exit.
(copy_object): Close file handle on early exit.
Free buffer on early exit.
Free gaps buffers once they are no longer needed.
* dwarf.c (display_debug_frames): Free allocated memory on exit.
(load_separate_debug_info): Free allocate memory on early exit.

6 years agoMIPS/GAS: Split Loongson MMI Instructions from loongson2f/3a
Chenghua Xu [Fri, 20 Jul 2018 12:21:33 +0000 (13:21 +0100)]
MIPS/GAS: Split Loongson MMI Instructions from loongson2f/3a

The MMI instruction set has been implemented in many Loongson
processors.  There is a lot of software optimized for MMI.  This patch
splits MMI from loongson2f/3a, and adds GAS and disassembler options for
MMI instructions.

2018-07-20  Chenghua Xu  <paul.hua.gm@gmail.com>
            Maciej W. Rozycki  <macro@mips.com>

bfd/
* elfxx-mips.c (print_mips_ases): Add MMI extension.

binutils/
* readelf.c (print_mips_ases): Add MMI extension.

gas/
* NEWS: Mention MultiMedia extensions Instructions (MMI)
support.
* config/tc-mips.c (options): Add OPTION_LOONGSON_MMI and
OPTION_NO_LOONGSON_MMI.
(md_longopts): Likewise.
(mips_ases): Define availability for MMI.
(mips_convert_ase_flags): Map ASE_LOONGSON_MMI to
AFL_ASE_LOONGSON_MMI.
(mips_cpu_info_table): Add ASE_LOONGSON_MMI for loongson2f/3a.
(md_show_usage): Add help for -mloongson-mmi and
-mno-loongson-mmi.
* doc/as.texi: Document -mloongson-mmi, -mno-loongson-mmi.
* doc/c-mips.texi: Document -mloongson-mmi, -mno-loongson-mmi,
.set loongson-mmi and .set noloongson-mmi.
* testsuite/gas/mips/loongson-2f.d: Move mmi test to ...
* testsuite/gas/mips/loongson-2f-mmi.d: Here.  Add ISA/ASE
flag verification.
* testsuite/gas/mips/loongson-2f.s: Move mmi test to ...
* testsuite/gas/mips/loongson-2f-mmi.s: Here.
* testsuite/gas/mips/loongson-3a.d: Move mmi test to ...
* testsuite/gas/mips/loongson-3a-mmi.d: Here.  Add ISA/ASE
flag verification.
* testsuite/gas/mips/loongson-3a.s: Move mmi test to ...
* testsuite/gas/mips/loongson-3a-mmi.s: Here.
* testsuite/gas/mips/mips.exp: Run loongson-2f-mmi and
loongson-3a-mmi tests.

include/
* elf/mips.h (AFL_ASE_MMI): New macro.
(AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_MMI.
* opcode/mips.h (ASE_LOONGSON_MMI): New macro.

opcodes/
* mips-dis.c (mips_arch_choices): Add MMI to loongson2f and
loongson3a descriptors.
(parse_mips_ase_option): Handle -M loongson-mmi option.
(print_mips_disassembler_options): Document -M loongson-mmi.
* mips-opc.c (LMMI): New macro.
(mips_opcodes): Replace IL2F|IL3A marking with LMMI for MMI
instructions.

6 years agoMIPS/LD: Fix crashing with a discarded dynamic relocation section
Maciej W. Rozycki [Fri, 20 Jul 2018 12:21:33 +0000 (13:21 +0100)]
MIPS/LD: Fix crashing with a discarded dynamic relocation section

Fix a crash that occurs in `_bfd_mips_elf_finish_dynamic_sections' if a
dynamic relocation section has been created, but marked to be discarded
by an assignment to the /DISCARD/ output section in a linker script.
In that case the output section is the absolute section, which has no
ELF section data attached, so trying to set its `sh_size' parameter
causes a null pointer dereference.

This is only done as the value for the DT_RELSZ dynamic entry is being
set, so fix the problem by not creating DT_REL, DT_RELSZ or DT_RELENT
dynamic entries in the first place if the dynamic relocation section
will not be output, as with no dynamic relocation data present these
would not serve their purpose anyway.

Add a generic ELF test case to verify that no dynamic relocation data is
reported in the dynamic segment.

bfd/
* elfxx-mips.c (_bfd_mips_elf_size_dynamic_sections): Do not
create DT_REL, DT_RELSZ or DT_RELENT dynamic entries if the
dynamic relocation section will be discarded from output.
(_bfd_mips_elf_finish_dynamic_sections) <DT_RELSZ>: Assert that
the dynamic relocation section will be retained in output.

ld/
* testsuite/ld-elf/reloc-discard.d: New test.
* testsuite/ld-elf/reloc-discard.ld: New test linker script.
* testsuite/ld-elf/reloc-discard.s: New test source.

6 years agoSpecify architecture for SPARC gas tests
Rainer Orth [Fri, 20 Jul 2018 09:15:57 +0000 (11:15 +0200)]
Specify architecture for SPARC gas tests

A couple of SPARC gas tests FAIL on Solaris/SPARC (both
sparc-sun-solaris2.11 and sparcv9-sun-solaris2.11):

FAIL: sparc PAUSE
FAIL: sparc CBCOND
FAIL: sparc CFR
FAIL: sparc CRYPTO
FAIL: sparc HPC+VIS3
FAIL: sparc IMA
FAIL: sparc OSA2015 %mwait asr and MWAIT instruction
FAIL: sparc OSA2015 %mcdper asr
FAIL: sparc SPARC5 and VIS4.0
FAIL: OSA2015 crypto instructions
FAIL: SPARC6
FAIL: FPCMPSHL OSA2017 instructions
FAIL: OSA2017 ONADD/ONSUB/ONMUL/ONDIV instructions.
FAIL: OSA2017 RLE instructions
FAIL: sparc64 rdasr
FAIL: sparc64 rdpr
FAIL: sparc64 rdhpr
FAIL: sparc64 wrasr
FAIL: sparc64 wrpr

It turns out there's a common pattern here: failures happen for all
tests that use SPARC ISA extensions beyond sparcv9, e.g. for the sparc
PAUSE test:

regexp_diff match failure
regexp "^   0:  b7 80 40 02     wr  %g1, %g2, %pause$"
line   "   0:   b7 80 40 02     wr  %g1, %g2, %asr27"
[...]
regexp_diff match failure
regexp "^   8:  b7 80 20 08     pause  8$"
line   "   8:   b7 80 20 08     wr  8, %asr27"
[...]

The fix is easy, actually: just as the tests specify the ISA extension
to use as a gas flag, the same needs to be done for objdump.  For the
test above, which has -Av9v, this means passing -msparc:v9v to objdump.
Doing so makes all but two (unrelated; to be reported separately)
failures go away.

This doesn't happen on Linux/SPARC, where gas emits GNU object attributes
matching the hardcare capabilities used.  Since gas doesn't yet implement
Solaris-style object capabilites, the explicit -march is needed, but only
passed on Solaris.

Tested on both sparc-sun-solaris2.11 and sparcv9-sun-solaris2.11.

* testsuite/gas/sparc/sparc.exp (set_tests_arch): New proc.
Prefix v9c, v9d, v9v, v9m, v9m8 tests with corresponding
set_tests_arch.

6 years agoRemove myself from target-specific MAINTAINERS
DJ Delorie [Fri, 20 Jul 2018 01:34:37 +0000 (21:34 -0400)]
Remove myself from target-specific MAINTAINERS

[binutils]
* MAINTAINERS (RL78, RX): Remove myself as maintainer.
[sim]
* MAINTAINERS (rl78, m32c, rx, v850): Remove myself as maintainer.

6 years agoAutomatic date update in version.in
GDB Administrator [Fri, 20 Jul 2018 00:00:47 +0000 (00:00 +0000)]
Automatic date update in version.in

6 years agoEliminate remaining gdb/guile cleanups
Pedro Alves [Thu, 19 Jul 2018 15:34:55 +0000 (16:34 +0100)]
Eliminate remaining gdb/guile cleanups

The remaining gdb/guile cleanups all handle the memory returned by
gdbscm_scm_to_c_string.

This commit makes gdbscm_scm_to_c_string return a
gdb::unique_xmalloc_ptr instead of a naked pointer, and eliminates the
remaining cleanups.

gdb/ChangeLog:
2018-07-19  Pedro Alves  <palves@redhat.com>

* guile/guile-internal.h (gdbscm_scm_to_c_string): Now returns a
gdb::unique_xmalloc_ptr.
* guile/scm-breakpoint.c (gdbscm_set_breakpoint_condition_x):
Adjust to use dbscm_wrap and gdb::unique_xmalloc_ptr.
* guile/scm-exception.c (gdbscm_exception_message_to_string): Use
copy-initialization.
* guile/scm-pretty-print.c (ppscm_print_children): Use
gdb::unique_xmalloc_ptr instead of cleanups.
(gdbscm_apply_val_pretty_printer): Remove cleanups.
* guile/scm-string.c (gdbscm_scm_to_c_string): Now returns a
gdb::unique_xmalloc_ptr.
* guile/scm-type.c (gdbscm_type_field, gdbscm_type_has_field_p):
Adjust to use gdb::unique_xmalloc_ptr.
* guile/scm-utils.c (extract_arg): Adjust.
* guile/scm-value.c (gdbscm_value_field): Adjust to use
gdb::unique_xmalloc_ptr instead of a cleanup.

6 years agoRemove make_cleanup_value_free_to_mark
Tom Tromey [Thu, 19 Jul 2018 14:49:58 +0000 (08:49 -0600)]
Remove make_cleanup_value_free_to_mark

Pedro's patch to introduce gdbscm_wrap removed the last caller of
make_cleanup_value_free_to_mark.  This patch removes this function.

I'm checking this in as obvious.  Tested by rebuilding, and by
grepping.

gdb/ChangeLog
2018-07-19  Tom Tromey  <tom@tromey.com>

* utils.c (do_value_free_to_mark)
(make_cleanup_value_free_to_mark): Remove.
* utils.h (make_cleanup_value_free_to_mark): Remove.

6 years ago[gdb/testsuite] Fix regexp in list-thread-groups-available.exp
Tom de Vries [Thu, 19 Jul 2018 14:24:16 +0000 (16:24 +0200)]
[gdb/testsuite] Fix regexp in list-thread-groups-available.exp

I ran into a gdb.mi/list-thread-groups-available.exp failure:
...
Running gdb/testsuite/gdb.mi/list-thread-groups-available.exp ...
FAIL: gdb.mi/list-thread-groups-available.exp:
        list available thread groups (unexpected output)
PASS: gdb.mi/list-thread-groups-available.exp:
        list available thread groups with filter
...
When doing an experiment of running it 100 times in a row, the failure
reproduced 3 times.

Analyzing the original failure led to insufficient quoting of square brackets
in a regexp.  This patch fixes the regexp, which resulted in 0 failures in a
100-in-a-row run.

Tested on x86_64-linux.

2018-07-19  Tom de Vries  <tdevries@suse.de>

* gdb.mi/list-thread-groups-available.exp (cores_re): Fix quoting in
regular expression.

6 years agoFix GDB build using mingw.org's MinGW
Eli Zaretskii [Thu, 19 Jul 2018 13:54:06 +0000 (16:54 +0300)]
Fix GDB build using mingw.org's MinGW

libiberty/
2018-07-18  Eli Zaretskii  <eliz@gnu.org>

PR gdb/23434
* libiberty/simple-object-elf.c (ENOTSUP): If not defined by
        errno.h, redirect ENOTSUP to ENOSYS.

6 years agoStop potential memory leaks in dwarf CIE reader.
Nick Clifton [Thu, 19 Jul 2018 13:23:31 +0000 (14:23 +0100)]
Stop potential memory leaks in dwarf CIE reader.

* dwarf.c (read_cie): Free allocated memory before returning with
a failure result.

6 years agogdbscm_wrap, really forward args
Pedro Alves [Thu, 19 Jul 2018 09:56:47 +0000 (10:56 +0100)]
gdbscm_wrap, really forward args

Commit 557e56be2648 ("Eliminate most remaining cleanups under
gdb/guile/") missed adding the && to Args to really forward the
arguments properly.  Noticed by inspection.

gdb/ChangeLog:
2018-07-19  Pedro Alves  <palves@redhat.com>

* guile/guile-internal.h (gdbscm_wrap): Really make 'args' a
forwarding reference.

6 years agoS/390: Set the htm flag on PPA
Andreas Krebbel [Thu, 19 Jul 2018 08:00:51 +0000 (10:00 +0200)]
S/390: Set the htm flag on PPA

The PPA instruction will be emitted by GCC transactional execution
builtins so it needs to be accepted with just -mhtm and without
-march=zEC12.

opcodes/ChangeLog:

2018-07-19  Andreas Krebbel  <krebbel@linux.ibm.com>

* s390-opc.txt (PPA): Add the htm flag.

6 years agox86: fold narrowing VCVT* templates
Jan Beulich [Thu, 19 Jul 2018 06:36:19 +0000 (08:36 +0200)]
x86: fold narrowing VCVT* templates

When multiple (here: two) forms of an insn take different width inputs
but produce identical size outputs (here: RegXMM), the templates can be
combined.

Also drop IgnoreSize (and the now redundant size specifiers) wherever
applicable.

6 years agox86: fold VFPCLASSP{D,S} templates
Jan Beulich [Thu, 19 Jul 2018 06:35:38 +0000 (08:35 +0200)]
x86: fold VFPCLASSP{D,S} templates

These are special because they may not have a register operand to derive
the vector length from, which requires to also deal with the braodcast
case when determining vector length in build_evex_prefix().

Also drop IgnoreSize (and the now redundant size specifiers) from their
suffixed counterparts.

6 years agox86: fold various AVX512* templates
Jan Beulich [Thu, 19 Jul 2018 06:34:45 +0000 (08:34 +0200)]
x86: fold various AVX512* templates

6 years agox86: fold various AVX512DQ templates
Jan Beulich [Thu, 19 Jul 2018 06:34:01 +0000 (08:34 +0200)]
x86: fold various AVX512DQ templates