mesa3d: ensure it can only be compiled with modular X server

kdrive has no glx support, and mesa3d depends on libdrm which needs
largefile support (just like the modular server), so ensure mesa3d
can only be enabled in that configuration.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

lsof: fix build after gentargets conversion

With the gentargets conversion, the tarball is extracted directly in the
source directory, so adjust paths to match.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

mrouted: use official tarball rather than git

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

u-boot: add support for version 2010.12

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

grep: fix build when libiconv is enabled

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

package/games: remove magiccube4d

It hasn't seen any updates since it was added early 2008, upstream seems
dead and it doesn't build with modern GCC versions.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain: fix again stamp file touch

In e6633fd2e37d25f32958f30e852baa216ce1384a I did crap, and added a
quietization inside a shell command, which was already quietized. This
was stupid, and is fixed by this patch.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain: add missing stamp file touch in external toolchain

In the support of custom external toolchains, we forgot to touch the
$(STAMP_DIR)/ext-toolchain-checked stamp file, which means that the
toolchain was re-checked and re-installed at everyt build.

At the same time, quietize a bit other stamp files touch.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

squid: bump to version 3.1.10

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

busybox 1.18.1: add hush fix

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

webkit: bump to version 1.2.5

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

icu: convert to autotargets and bump to version 4.4.2

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libxslt: bump to version 1.1.26

Bump libxslt to version 1.1.26

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libxml2: bump to version 2.7.8

Bump libxml2 to version 2.7.8.
Re-enable libtool patch now that we handle libtool2 in package infra.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

ed: bump to version 1.5

* Bump to version 1.5

* Really configure right (or wrong depending on perspective) since we
  weren't building ed for the target it was completely broken.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

screen: bump to version 4.0.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

grep: bump to version 2.7

[Peter: needs wchar]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

bison: bump to version 2.4.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

nano: bump to version 2.2.6

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

tar: bump to version 1.25

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

findutils: bump to version 4.4.2

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

patch: needs toolchain with wchar

* Patch needs a toolchain with WCHAR support
* Use real upstream gnu mirror

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

vim: convert to autotargets, bump to version 7.2.446

* Convert to autotargets package.
* Bump to version 7.2.446.

We fetch from svn to avoid having a ton of patch files.

This won't do us any good if we want vim 7.3 since the repository was
moved to mercurial. However 7.3 still has some cross-compile issues.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

freetype: bump to version 2.4.4

See http://www.freetype.org/index2.html#release-freetype-2.4.4

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

sqlite: bump to version 3.7.4

Many small fixes, see http://www.sqlite.org/releaselog/3_7_4.html

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

php: security bump to version 5.2.16

* Fixed extract() to do not overwrite $GLOBALS and $this when using
  EXTR_OVERWRITE.

* Fixed crash in zip extract method (possible CWE-170).

* Fixed a possible double free in imap extension.

* Fixed possible flaw in open_basedir (CVE-2010-3436).

* Fixed NULL pointer dereference in ZipArchive::getArchiveComment.
  (CVE-2010-3709).

* Fixed bug #52929 (Segfault in filter_var with FILTER_VALIDATE_EMAIL
  with large amount of data).

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

portmap: install initscript

Thanks to patrick.ziegler@fh-kl.de in the mailing list for noticing.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

tslib: Enable raw module in ts.conf

By default there is no module activated in ts.conf. According to the
ts.conf previously attached in the tslib package dir (which was never
installed) the default module of choice was the raw module.

This patch enables the raw module in the ts.conf file in the tslib
source tree, which will be installed in the target.

Signed-off-by: Daniel Nyström <daniel.nystrom@timeterminal.se>
Acked-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

tslib: bump version to current git head

Due to missing official releases, fetch directly from GitHub
repository. Many bugfixes since 1.0 and all previous patches in
Buildroot are either applied or obsoleted.

Signed-off-by: Daniel Nyström <daniel.nystrom@timeterminal.se>
Acked-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

linux: don't force IPv6 configuration in kernel

As per the discussion at
http://lists.busybox.net/pipermail/buildroot/2010-December/040030.html,
remove the bits that forced the IPv6 configuration in the kernel
depending on the toolchain ability to support (or not) IPv6. You may
have a toolchain with IPv6 support but still don't want to have IPv6
in your kernel.

The only parameters we adjust in the kernel configuration are:

 * ARM EABI, since we got a lot of bug reports regarding misconfigured
   kernel compared to the ABI used by userspace applications.

 * initramfs, since its contents are generated by Buildroot itself

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

imagemagick: add patch to fix libxml2 issue and remove useless patch

The patch imagemagick-6.6.4-add-errno-h-if-argz-h-does-not-exist.patch
was not applied anymore due to a difference in the version number, and
it didn't prevent imagemagick to be built. It was introduced several
years ago together with the ImageMagick package itself, so presumably
it is no longer needed.

The new patch allows ImageMagick to use the correct xml2-config script
to get the proper location for XML2 headers and libraries. Otherwise,
-I/usr/include/libxml2 is found in the compile flags.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qt: fix mysql module build

Closes #2371

Bug 2371 was a Qt compilation issue when MySQL support was enabled,
because the Qt configuration tests were looking at host MySQL
libraries.

Even though I couldn't reproduce the bug with MySQL libraries
installed on my host, there was clearly a problem since
-I/usr/include/mysql and -L/usr/lib/mysql were part of the compilation
flags when building those tests.

This was caused by the fact that /usr/bin/mysql_config was used
instead of $(STAGING_DIR)/usr/bin/mysql_config. We fix this by passing
the path to the correct mysql_config script using the -mysql_config Qt
./configure argument. Since this mysql_config script returns the
correct flags for libraries and headers path, the hardcoded -I and -L
flag in qt.mk are no longer needed.

With this in place, Qt is no longer compiled with -I/usr/include/mysql
and -L/usr/lib/mysql, which presumably should fix the problem reported
in bug 2371.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

mysql_client: bump to 5.1.53 to fix abi check problem

MySQL 5.1.47 is affected by a bug in one test called the "ABI check",
which does not work with recent gcc versions. This bug is referenced
as http://bugs.mysql.com/bug.php?id=52514 in MySQL bug tracker.

Since it has been fixed in newer versions of MySQL, we simply bump the
version to the latest available in the 5.1.x series.

The patches have not changed, they have only been refreshed.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xkeyboard-config: bump to 2.0 to fix bug 2965

Closes #2965

For some odd reason, xkeyboard-config < 1.8 was creating a symbolic
link from /usr/share/X11/xkb/xkbcomp to the xkbcomp binary. But in
cross-compilation mode, this is absurd as the xkbcomp binary to which
the link is pointing is the one in $(HOST_DIR).

This symbolic link thing has been removed completely starting from
xkeyboard-config 1.9. See
http://cgit.freedesktop.org/xkeyboard-config/commit/?id=f413dff57e77e7b01461508f74b4e92d1dc8defd.

Therefore, we simply bump xkeyboard-config to the latest available
version, 2.0.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

busybox: get rid of BR2_PACKAGE_BUSYBOX_FULLINSTALL

As discussed on IRC, this only needs to be disabled for very specific
configurations, and it can nowadays be done with a custom busybox
.config (CONFIG_INSTALL_APPLET_DONT), so get rid of the option.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

busybox: clarify BR2_PACKAGE_BUSYBOX_FULLINSTALL description

Explicitly explain what the (default) install target does, so people who
don't know busybox details understands what the option does.

Notice: Busybox can be configured to create hard links or shell wrappers
instead, but by default symlinks are used.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xlib_libX11: compile makekeys for the host correctly

As reported by Miroslav Ignjatovic in bug #2983, our hack in
xlib_libX11 to build makekeys for the host does not work, for several
reasons:

 * As we are building a tool for the host, we shouldn't pass
   -I$(STAGING_DIR)/usr/include, since the $(STAGING_DIR) contains
   headers of packages for the target.

 * Instead, we should use the headers in $(HOST_DIR)/usr/include. They
   were not used due to a typo: $(HOST_CFLAGS) must be used instead of
   $(HOSTCFLAGS).

 * Finally, in order for makekeys to find the required headers in
   $(HOST_DIR)/usr/include, we must depend on host-xproto_xproto.

This fixes bug #2983.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain: fix multilib symlink for external toolchains

ARCH_SUBDIR is a shell variable, so it should be referenced with
$${ARCH_SUBDIR}. Without this, no symbolic link is created, and the
external toolchain fails to work if the non-default multilib variant
is used.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

busybox: bump 1.18.x version

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qt: svg and multimedia modules depends on gui module as well

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qt: phonon support depends on gui module

Otherwise configure errors out with 'Phonon enabled, but GUI disabled'.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

linux: fix linux-% shortcut targets

linux-% shortcut targets (short for linux26-%) ignores the ouput dir
$(O) so that 'make O=output.arm linux-menuconfig' is actually run in the
default $(O) directory output/ and not in output.arm/. Fix by passing on
$(O) if set.

[Peter: Use EXTRAMAKEARGS]
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

linux: support 'make linux26-nconfig'

Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain/gcc: bump 4.5.x version

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

linux: add KERNEL_ARCH_PATH to fix x86-specific issue

Both i386 and x86_64 architectures are supported by the arch/x86
directory in the kernel. So, when we copy the kernel configuration
file to arch/$(KERNEL_ARCH)/configs/, it does not work because
arch/i386 and arch/x86_64 do not exist.

So, we introduce KERNEL_ARCH_PATH, which is the path to the
architecture specific directory in the kernel source tree.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

board: Add a Qemu mipsel Malta board

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

board: Add a Qemu PPC g3beige board

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

linux: add support for ELF vmlinux image

The ELF vmlinux image found at the root of the kernel source tree is
the format that Qemu needs when emulating mips(el) or ppc targets, so
add support for it.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

board: Add Qemu SH4 r2d configuration

[ Thomas:

   * renamed sh4_defconfig to qemu_sh4_r2d_defconfig, for consistency
     with other Qemu platforms supported
   * renamed board/qemu/sh4 to board/qemu/sh4-r2d
   * minor fixes in the readme.txt
   * remove useless statements in the minimal defconfig
   * switch to a fixed kernel version instead of "same as headers"
]

Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xtensa: remove unused and useless skeleton patch

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

linux: support a space-separated list of patches

The kernel being a component that often needs a fairly important set
of changes to be adapted to a particular hardware platform, having
maximum flexibility on the patching process is a nice
thing. Therefore, as per the discussions from the Buildroot Developer
Day, we add a mechanism to apply a list of patches (that could come
either from URLs, local files or local directories).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

linux: Import minimal defconfigs as defconfigs

Now that minimal kernel defconfigs are used in Buildroot, the problem
is that copying those minimal configuration files to .config in the
kernel source tree does not work, as kconfig will ask interactively
what should be the value for all unspecified options.

On suggestion on Sam Ravnborg, the easiest way to solve this is to
import the minimal defconfig file as a defconfig inside the kernel
tree (in arch/$(ARCH)/configs) and configure the kernel with it.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Add network scripting folders to fs/skeleton

Those folders are currently created using makedevs according to the
specifications in device_table.txt. However, as makedevs is no longer
executed when dynamic device creation methods are selected (devtmpfs,
udev, mdev), those folders must be created differently. We choose to
put them directly into the default filesystem skeleton.

Signed-off-by: Yegor Yefremov <yegor_sub1@visionsystems.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Free text field for serial port configuration

BR2_TARGET_GENERIC_GETTY_PORT has now a string type instead of choice.
This makes port configuration flexible and compact.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

u-boot: add CROSS_COMPILE/ARCH when building host tools

Even when building the host tools, for some reason U-Boot tries to
execute the cross-compiler, so tell it which cross-compiler to use in
order to avoid failure such as:

/usr/bin/make -j12 -C /home/test/outputs/test-253-mini2440_defconfig/build/u-boot-custom tools
make[1]: arm-linux-gcc: Command not found
make[1]: Entering directory `/home/test/outputs/test-253-mini2440_defconfig/build/u-boot-custom'
for dir in tools examples api_examples ; do /usr/bin/make -C $dir _depend ; done
Generating include/autoconf.mk
/bin/sh: line 3: arm-linux-gcc: command not found

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

board: add new Qemu x86 configuration file

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

board: add support for Mini 2440

Paul Jones documented at
http://pauljones.id.au/blog/2010/07/using-buildroot-on-a-mini2440/ how
to use Buildroot to generate a system for the FriendlyARM Mini2440
platform. This patch integrates Paul's work into Buildroot.

Unfortunately, the kernel being 2.6.32, we can't easily use a minimal
defconfig here. The mini2440 support has been merged into more recent
kernels, but I don't have the hardware to test.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

board: add Qemu Versatile defconfig

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Remove the few remaining unused Atmel-specific bits

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

board: remove Valka v100sc2

This default configuration did not even build a kernel image, which is
the main point of having board default configuration. So remove it.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

board: remove atstk1005_defconfig

Neither the kernel nor U-Boot have support for a 1005 board, so let's
get rid of this board configuration, the corresponding target
skeleton, kernel and busybox configuration and device table.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

board: update and minimize atstk100x_defconfig

Use recent U-Boot and kernel version, remove target skeleton and use
the default one instead, remove useless kernel configuration, busybox
configuration and device table.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

board: remove support for at91sam9260pf

It was supposed to be the support for AT91SAM9260 using a parallel flash
(instead of the usual dataflash). But the provided U-Boot configuration
at91sam9260pf.h was not used anywhere, and it was unsufficient to add
correct support in U-Boot (some changes in U-Boot Makefile would also be
needed). Additionnally, this configuration has not been merged into U-Boot
upstream since 2007 (when it was added to Buildroot).

Therefore, let's get rid of this configuration. If some users are
interested, we can re-introduce it properly with their help.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

board: update and minify at91sam9260dfc_defconfig

Use recent U-Boot and kernel versions, remove useless kernel
configuration file.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

board: update and minify at91rm9200df_defconfig

Use recent U-Boot and kernel versions, remove useless kernel
configuration file.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

board: simplify kb9202 board

Minimize the board defconfig, remove custom busybox configuration,
custom kernel configuration (use the kernel defconfig instead), custom
device table and target skeleton. The only difference in the target
skeleton was the support of mdev and the usage of an automount
script. Instead of adding this in a board-specific way, we should
provide board-independent configuration options. There are already
patches contributed to add support for mdev.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

board: simplify atngw100 support

Minimize atngw100_defconfig, remove atngw100-base_defconfig, and
remove the target skeleton and device table. Instead of having
complete copies of new target skeletons (making them hard to
maintain), we should just have a post-build script that
adds/removes/tweaks the existing target skeleton.

Moreover, most of the tweaks in this target skeleton were for specific
packages, but the policy now is that board defconfig should just build
a basic root filesystem with Busybox, and let the user select
whichever set of packages (s)he wants.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Minify arm_nptl_toolchain_defconfig

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Minify arm_toolchain_defconfig

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

board: remove i386/i686_defconfig

Those are not associated with any specific hardware system (PC or
another i386 system). Moreover, the fact that those configurations
require the build of a JFFS2 filesystem, very uncommon on PC systems,
seems to indicate that those configurations are not really being used
today.

It would make more sense to have a qemu_i388_defconfig (building a
kernel with just the device drivers for Qemu) and possibly a
pc_i386_defconfig (building a kernel with many device drivers, and a
bootloader such as Grub or Grub 2).

We also remove the corresponding kernel configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Remove useless kernel config files for integrator926

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

board: remove integrator926_huge_defconfig

One config per board is enough.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

board: minify integrator926_defconfig

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

barebox: bump Barebox to 2010.11

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

u-boot: add U-Boot 2010.09

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

dependencies: add unzip

unzip is needed to uncompress at91bootstrap, so let's add it as a
dependency. This can be discussed, and if we think it shouldn't be a
new dependency, we can also build a host-unzip.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

at91bootstrap: no board name check when 'make source' is used

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

board: update and minify at91sam9g20dfc_defconfig

Use modern U-Boot and kernel versions, get rid of the now unused
kernel configuration file since we use the kernel defconfig instead.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

board: update and minify at91sam9261ek_defconfig

Use modern U-Boot and kernel versions, and get rid of the useless
kernel configuration file, since we now use the kernel defconfig.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

board: update and minify at91sam9263ek_defconfig

Use modern kernel and U-Boot versions, and get rid of the now useless
kernel configuration file since we use the kernel defconfig file
instead.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

at91bootstrap: rename config options for consistency

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

at91bootstrap: switch to the official version

The Buildroot makefile was fetching and building the special
AT91Bootstrap of Ulf, which is not the Atmel official version. While
Ulf's variant has a better configuration/build system, the Atmel
version, as officially supported, is probably a better choice for the
future.

The Atmel version only needed a small tweak to work with EABI
toolchains.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

documentation: Update to explain how board support works

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Re-add target/generic/Config.in options to menuconfig

The options to customize the hostname, the banner and the serial port
configuration are now inside a menu named 'System configuration'.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Remove crazy set of empty directories

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Remove Busybox skeleton from target/device/Atmel

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Remove all Config.in/Makefile.in files in target/device

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Stop referencing the crazy target/device stuff

We don't need Config.in and Makefile in target/device: defconfig files
are sufficient to describe the specificities of a board (architecture,
compilation flags, bootloader and kernel details, etc.).

However, a placeholder such as target/device will be kept in order to
host things such as kernel configuration files or various
board-specific patches.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Remove mini device table, it isn't used

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Use the new BR2_ROOTFS_SKELETON_CUSTOM options

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Move Config.in.mirrors out of target/device

Having Config.in.mirrors (which also to select various download sites)
inside target/device sounds strange. This commit moves the contents of
Config.in.mirrors directly into the main Config.in file.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Remove useless target/device/mips

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Remove completely useless set of Makefiles specific to Atmel

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Update defconfigs after Atmel mirror related options removal

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Remove unused Atmel-specific mirror definitions

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

defconfigs: keep only one defconfig per board

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

CHANGES: #561/#1651/#1735 are resolved

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

l2tp: convert to gentargets and change to xl2tp

l2tp is no longer being developed, and xl2tpd is forked from l2tpd and is
maintained by Xelerance Corporation.

[Peter: remove invalid pppd dependency]
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libtheora: bump version to 1.1.1

This allows to disable the build of the format specification
documentation, which was causing issues in cross-compiling mode.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

mplayer: convert to gentargets, bump to a recent SVN version

Based on the conversion to gentargets done by Martin Banky, several
issues were fixed, and the mplayer package was improved:

 * Updated to a recent SVN version

 * Removed mandatory dependency on libmad

 * The AVR32 specific patch has been removed. It was a pain to remain
   blocked at the old 1.0-rc2 just for this patch. All this
   optimization work should have been submitted upstream, Buildroot is
   not the place to carry such heavy modifications.

 * Options were added to select whether mplayer and/or mencoder should
   be built/installed.

 * Support for additional options if packages have been selected:
   tremor, libmad, libtheora, libpng, jpeg, xlib_libX11,
   xlib_libXv. More could be added in the future.

 * Support for ARM-related optimization options. Similar improvements
   could be done for x86 and PowerPC architectures.

[Peter: fix build with !IPV6]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>