pa.c (pa_init_machine_status, [...]): Delete.
* pa.c (pa_init_machine_status, pa_mark_machine_status,
pa_free_machine_status, hppa_init_pic_save): Delete.
(hppa_pic_save_rtx): New. Use get_hard_reg_initial_val.
(hppa_profile_hook): Use hppa_pic_save_rtx.
* pa.h (struct machine_function, PIC_OFFSET_TABLE_SAVE_RTX,
hppa_init_pic_save): Delete.
(hppa_pic_save_rtx): Declare.
* pa.md (call, call_value, sibcall, sibcall_value,
builtin_setjmp_receiver): Use hppa_pic_save_rtx.
From-SVN: r43883
t-h8300 (LIB1ASMFUNCS): Add _floatdisf and _fixsfdi.
2001-07-09 Kazu Hirata <kazu@hxi.com>
* config/h8300/t-h8300 (LIB1ASMFUNCS): Add _floatdisf and _fixsfdi.
* config/mn10200/t-mn10200 (LIB1ASMFUNCS): Likewise.
From-SVN: r43882
Update.
From-SVN: r43877
output.h: Add declaration of final_forward_branch_p.
* output.h: Add declaration of final_forward_branch_p.
* config/i386/i386.c (output_fix_trunc): Remove unused variable.
From-SVN: r43876
varray.c: Include errors.h for internal_error and trim_filename declarations.
* varray.c: Include errors.h for internal_error and trim_filename
declarations.
* Makefile.in (varray.o): Add errors.h.
From-SVN: r43875
expr.h: Adjust prototypes for have_add2_insn, have_sub2_insn.
2001-07-09 Toon Moene <toon@moene.indiv.nluug.nl>
* expr.h: Adjust prototypes for have_add2_insn, have_sub2_insn.
* optabs.c (have_add2_insn): Check whether the add insn chosen
really accepts the operands. (have_sub2_insn): Ditto for sub insn.
* reload1.c (reload_cse_move2add): Adjust calls of have_add2_insn.
From-SVN: r43874
Forgot to commit with last batch.
From-SVN: r43873
emit-rtl.c (gen_highpart_mode): New.
* emit-rtl.c (gen_highpart_mode): New.
* rtl.h (gen_highpart_mode): Declare.
* sparc.md (insn splitters): Use gen_highpart_mode, whenever the
operand can be VOIDmode constant.
From-SVN: r43869
flow.c (redirect_edge_and_branch_force): New.
* flow.c (redirect_edge_and_branch_force): New.
(can_fallthru): Ensure that basic blocks are succeeding.
(try_optimize_cfg): Do not delete basic block if it is the last one.
* flow.c (try_redirect_by_replacing_jump): Do not remove
jumps with side effects, unlink chain on fallthru edge;
set block for new jump instruction; avoid basic block to
over by line number note.
* flow.c (try_simplify_condjump): Verify that the condjump
is not always falling trought.
Re-install patch:
* flow.c (try_redirect_by_replacing_jump): Remove cc0 setter.
* flow.c (forwarder_block_p): Fix for fallthru blocks.
(try_redirect_by_replacing_jump): Update properly the count
and frequency information.
From-SVN: r43867
emit-rtl.c (adjust_address, [...]): Handle an address that is a LO_SUM specially.
* emit-rtl.c (adjust_address, adjust_address_nv): Handle an
address that is a LO_SUM specially.
* explow.c (plus_constant_wide, case LO_SUM): Deleted.
From-SVN: r43866
* c-lang.c (start_cdtor): Remove extra parameter from start_function.
From-SVN: r43865
valarray_meta.h (_Expr::operator+): Use qualified id for _Expr template template argument.
* include/bits/valarray_meta.h (_Expr::operator+): Use qualified id
for _Expr template template argument.
(_Expr::operator-): Likewise.
(_Expr::operator~): Likewise.
(_Expr::operator!): Likewise.
(_DEFINE_EXPR_UNARY_OPERATOR): Likewise.
From-SVN: r43862
[multiple changes]
Mon Jul 9 06:41:07 2001 Richard Kenner <kenner@vlsi1.ultra.nyu.edu>
* emit-rtl.c (adjust_address_nv, replace_equiv_address_nv): New fcns.
(operand_subword): Use them.
(change_address_1): Renamed from change_address; new arg VALIDATE.
* expr.h: Reflect above changes; change_address now macro.
* alias.c (canon_rtx): Use replace_equiv_address_nv instead of
making MEM.
* cselib.c (add_mem_for_addr): Likewise.
* expr.c (protect_from_queue, emit_move_insn_1): Likewise.
* regmove.c (try_apply_stack_adjustment): Likewise.
* reload.c (push_reload, make_memloc): Likewise.
* reload1.c (eliminate_regs): Likewise.
* simplify-rtx.c (simplify_replace_rtx): Likewise.
* caller-save.c (setup_save_areas): Use adjust_address_nv instead of
adjust_addess.
* combine.c (make_extraction, simplify_shift_const): Likewise.
(gen_lowpart_for_combine): Likewise.
* cse.c (gen_lowpart_if_possible): Likewise.
* function.c (fixup_var_refs_1, purge_addressof_1): Likewise.
* expr.c (expand_expr, case COMPONENT_REF): Likewise.
* optabs.c (gen_move_insn): Likewise.
* reload1.c (alter_reg): Likewise.
* simplify-rtx.c (simplify_subreg): Likewise.
* stmt.c (expand_anon_union_decl): Likewise.
* recog.c (validate_replace_rtx_1): Likewise.
(expr.h): Include.
* Makefile.in (recog.o): Add $(EXPR_H).
* explow.c (stabilize): Call replace_equiv_address.
* expr.c (move_by_pieces_1, store_by_pieces_2): Likewise.
* final.c (alter_subreg): OFFSET is HOST_WIDE_INT.
2001-07-09 Bo Thorsen <bo@suse.co.uk>
* config/i386/unix.h (ASM_OUTPUT_MI_THUNK): Fix x86-64 vtable support.
2001-07-09 Neil Booth <neil@daikokuya.demon.co.uk>
* final.c (output_addr_const): Use target opening and
closing parentheses.
* target-def.h: Define TARGET_ASM_OPEN_PAREN, TARGET_ASM_CLOSE_PAREN
defaults, add to TARGET_ASM_OUT.
* target.h (struct gcc_target): Add open_paren and close_paren.
* doc/md.texi: Update.
* doc/tm.texi: Document TARGET_ASM_FUNCTION_END_PROLOGUE,
TARGET_ASM_FUNCTION_BEGIN_EPILOGUE, TARGET_ASM_OPEN_PAREN and
TARGET_ASM_CLOSE_PAREN.
* config/i386/i386.c (TARGET_ASM_OPEN_PAREN, TARGET_ASM_CLOSE_PAREN):
Override.
* config/pdp11/pdp11.c (TARGET_ASM_OPEN_PAREN, TARGET_ASM_CLOSE_PAREN):
Override.
* config/1750a/1750a.h (ASM_OPEN_PAREN, ASM_CLOSE_PAREN): Remove.
* config/a29k/a29k.h: Similarly.
* config/alpha/alpha.h: Similarly.
* config/arc/arc.h: Similarly.
* config/arm/aof.h: Similarly.
* config/arm/aout.h: Similarly.
* config/avr/avr.h: Similarly.
* config/c4x/c4x.h: Similarly.
* config/clipper/clipper.h: Similarly.
* config/convex/convex.h: Similarly.
* config/d30v/d30v.h: Similarly.
* config/dsp16xx/dsp16xx.h: Similarly.
* config/elxsi/elxsi.h: Similarly.
* config/fr30/fr30.h: Similarly.
* config/h8300/h8300.h: Similarly.
* config/i370/i370.h: Similarly.
* config/i386/i386.h: Similarly.
* config/i860/i860.h: Similarly.
* config/i960/i960.h: Similarly.
* config/ia64/ia64.h: Similarly.
* config/m32r/m32r.h: Similarly.
* config/m68hc11/m68hc11.h: Similarly.
* config/m68k/m68k.h: Similarly.
* config/m88k/m88k.h: Similarly.
* config/mcore/mcore.h: Similarly.
* config/mips/mips.h: Similarly.
* config/mn10200/mn10200.h: Similarly.
* config/mn10300/mn10300.h: Similarly.
* config/ns32k/ns32k.h: Similarly.
* config/pa/pa.h: Similarly.
* config/pdp11/pdp11.h: Similarly.
* config/pj/pj.h: Similarly.
* config/romp/romp.h: Similarly.
* config/rs6000/rs6000.h: Similarly.
* config/sh/sh.h: Similarly.
* config/sparc/sparc.h: Similarly.
* config/v850/v850.h: Similarly.
* config/vax/vax.h: Similarly.
* config/we32k/we32k.h: Similarly.
2001-07-09 Joseph S. Myers <jsm28@cam.ac.uk>
* doc/c-tree.texi: Document representation of attributes.
2001-07-08 Joseph S. Myers <jsm28@cam.ac.uk>
* doc/tm.texi: Update some places for the rename of target to
targetm. Fix typo.
2001-07-08 Joseph S. Myers <jsm28@cam.ac.uk>
* target.h (struct gcc_target): Add insert_attributes.
* target-def.h (TARGET_INSERT_ATTRIBUTES): Define.
(TARGET_INITIALIZER): Update.
* tree.c, tree.h (default_insert_attributes): New function.
Update comments on other default functions to refer to targetm,
not target.
* doc/tm.texi (INSERT_ATTRIBUTES): Update to document
TARGET_INSERT_ATTRIBUTES.
(SET_DEFAULT_DECL_ATTRIBUTES): Remove.
* c-common.c (decl_attributes): Use targetm.insert_attributes.
Don't use PRAGMA_INSERT_ATTRIBUTES.
* Makefile.in (c-common.o): Depend on $(TARGET_H).
* c-decl.c (start_decl, start_function): Don't call
SET_DEFAULT_DECL_ATTRIBUTES.
* config/c4x/c4x.h (SET_DEFAULT_DECL_ATTRIBUTES): Don't define.
* config/c4x/c4x-protos.h (c4x_set_default_attributes): Don't
declare.
* config/c4x/c4x.c (TARGET_INSERT_ATTRIBUTES): Define.
(c4x_check_attribute): Avoid modifying attribute list itself.
(c4x_set_default_attributes): Rename to c4x_insert_attributes.
Make static.
* config/sh/sh.h (PRAGMA_INSERT_ATTRIBUTES): Don't define.
* config/sh/sh-protos.h (sh_pragma_insert_attributes): Don't
declare.
* config/sh/sh.c (TARGET_INSERT_ATTRIBUTES): Define.
(sh_pragma_insert_attributes): Rename to sh_insert_attributes.
Make static.
* config/v850/v850.h (SET_DEFAULT_DECL_ATTRIBUTES): Don't define.
* config/v850/v850-protos.h (v850_set_default_decl_attr): Don't
declare.
* config/v850/v850.c (TARGET_INSERT_ATTRIBUTES): Define.
(v850_set_default_decl_attr): Rename to v850_insert_attributes.
Adjust parameters. Make static.
2001-07-08 Joseph S. Myers <jsm28@cam.ac.uk>
* c-common.c (decl_attributes): Only take a single attributes
parameter.
* c-common.h (decl_attributes): Update prototype.
* c-decl.c (start_decl, start_function): Only take a single
attributes parameter. Update calls to decl_attributes.
(finish_struct, finish_enum): Update calls to decl_attributes.
(push_parm_decl): Expect unified list of attributes. Update call
to decl_attributes.
* c-parse.in (fndef, initdcl, notype_initdcl, nested_function,
notype_nested_function, component_declarator,
component_notype_declarator, label): Update calls to
decl_attributes.
(absdcl_maybe_attribute, parm, firstparm, myparm): Unify attribute
lists that are passed to push_parm_decl.
* c-tree.h (start_function, start_decl): Update prototypes.
* config/sh/sh-protos.h, config/sh/sh.c
(sh_pragma_insert_attributes): Only take a single attributes
parameter.
* config/sh/sh.h (PRAGMA_INSERT_ATTRIBUTES): Likewise.
* doc/tm.texi (INSERT_ATTRIBUTES): Update.
* objc/objc-act.c (define_decl, generate_objc_symtab_decl,
build_module_descriptor, generate_static_references,
generate_strings, build_selector_translation_table,
generate_descriptor_table, generate_protocols,
generate_ivars_list, generate_dispatch_table,
generate_protocol_list, generate_category,
generate_shared_structures, really_start_method, add_objc_decls,
generate_classref_translation_entry): Update calls to start_decl
and start_function.
(build_tmp_function_decl, start_method_def): Unify attribute lists
that are passed to push_parm_decl.
2001-07-08 Neil Booth <neil@daikokuya.demon.co.uk>
* final.c (no_asm_to_stream): New.
(final_scan_insn): Use target structures for prologue ends
and epilogue starts.
* output.h (no_asm_to_stream): New.
* target-def.h (TARGET_ASM_FUNCTION_END_PROLOGUE,
TARGET_ASM_FUNCTION_BEGIN_EPILOGUE): New.
(TARGET_ASM_OUT): Update.
* target.h (struct gcc_target): New members function_end_prologue
and function_begin_epilogue.
* config/1750/1750.h (ASM_OUTPUT_FUNNAM): Delete as unused.
* config/alpha/alpha-protos.h (output_end_prologue): Delete.
* config/alpha/alpha.c (output_end_prologue): Rename to
alpha_output_function_end_prologue. Use in target struct
and make static.
* config/alpha/alpha.h (FUNCTION_END_PROLOGUE): Delete.
* config/ia64/ia64-protos.h (ia64_output_end_prologue): Delete.
* config/ia64/ia64.c (ia64_output_end_prologue): Rename to
ia64_output_function_end_prologue. Use in target struct
and make static.
(ia64_function_prologue, ia64_funciton_epilogue): Rename
mistyped prototypes.
* config/ia64/ia64.h (FUNCTION_END_PROLOGUE): Delete.
* config/m88k/m88k-protos.h (m88k_end_prologue, m88k_begin_epilogue):
Delete.
* config/m88k/m88k.c (m88k_end_prologue, m88k_begin_epilogue): Rename
an use in target struct, make static.
* config/ia64/ia64.h (FUNCTION_END_PROLOGUE, FUNCTION_BEGIN_EPILOGUE):
Delete.
2001-07-08 Richard Henderson <rth@redhat.com>
* stmt.c (emit_case_nodes): Convert modes properly in low+high test.
2001-07-08 Richard Henderson <rth@redhat.com>
* config/i386/i386.md: Remove constraints strings from define_split
and define_peephole2 patterns.
(eh_return_si, eh_return_di): Split eh_return_1 for modes.
(eh_return): Use them.
2001-07-08 Richard Henderson <rth@redhat.com>
* doc/tm.texi (Exception Handling): New subnode of Stack and Calling.
Document MD_FALLBACK_FRAME_STATE_FOR.
2001-07-07 Stephane Carrez <Stephane.Carrez@worldnet.fr>
* config/m68hc11/m68hc11.c (m68hc11_initial_elimination_offset):
Take into account m68hc11_sp_correction for FRAME_POINTER_REGNUM
elimination.
* config/m68hc11/m68hc11.h (STARTING_FRAME_OFFSET): Use 0.
2001-07-07 Nick Clifton <nickc@cambridge.redhat.com>
* config/ia64/sysv4.h (ASM_OUTPUT_LABELREF): Append # to end
of the label inside NAME as opposed to just the end of NAME.
2001-07-07 Neil Booth <neil@daikokuya.demon.co.uk>
* config/alpha/alpha-protos.h (vms_valid_decl_attribute_p): Delete.
* config/alpha/alpha.c (alpha_init_machine_status,
alpha_mark_machine_status, alpha_free_machine_status): Delete.
(TARGET_VALID_DECL_ATTRIBUTE): Define for VMS.
(vms_valid_decl_attribute_p): Make static, conditionally compile.
* config/alpha/alpha.h (VALID_MACHINE_DECL_ATTRIBUTE): Delete.
2001-07-06 Stan Shebs <shebs@apple.com>
* target.h (targetm): Rename global from "target", so as not to
conflict with local variables.
* c-decl.c: Ditto.
* c-typeck.c: Ditto.
* final.c: Ditto.
* tree.c: Ditto.
* cp/decl.c: Ditto.
* cp/decl2.c: Ditto.
* cp/typeck.c: Ditto.
* 1750a/1750a.c: Ditto.
* a29k/a29k.c: Ditto.
* arc/arc.c: Ditto.
* arm/arm.c: Ditto.
* avr/avr.c: Ditto.
* clipper/clipper.c: Ditto.
* convex/convex.c: Ditto.
* d30v/d30v.c: Ditto.
* dsp16xx/dsp16xx.c: Ditto.
* elxsi/elxsi.c: Ditto.
* fr30/fr30.c: Ditto.
* h8300/h8300.c: Ditto.
* i370/i370.c: Ditto.
* i386/i386.c: Ditto.
* i860/i860.c: Ditto.
* i960/i960.c: Ditto.
* ia64/ia64.c: Ditto.
* m32r/m32r.c: Ditto.
* m68hc11/m68hc11.c: Ditto.
* m68k/m68k.c: Ditto.
* m88k/m88k.c: Ditto.
* mips/mips.c: Ditto.
* ns32k/ns32k.c: Ditto.
* pa/pa.c: Ditto.
* pdp11/pdp11.c: Ditto.
* romp/romp.c: Ditto.
* rs6000/rs6000.c: Ditto.
* sh/sh.c: Ditto.
* sparc/sparc.c: Ditto.
* vax/vax.c: Ditto.
* we32k/we32k.c: Ditto.
* doc/tm.texi: Update the manual to match.
2001-07-06 Richard Henderson <rth@redhat.com>
* except.h (MUST_USE_SJLJ_EXCEPTIONS): Examine the value of
DWARF2_UNWIND_INFO not just whether it is defined.
2001-07-06 Diego Novillo <dnovillo@redhat.com>
* combine.c (combine_simplify_rtx): Also recompute 'mode' if the
call to simplify_binary_operation returns a new pattern.
2001-07-06 Roman Lechtchinsky <rl@cs.tu-berlin.de>
* glimits.h (__SHRT_MAX__): New.
(SHRT_MIN, USHRT_MAX): Define in terms of SHRT_MAX.
(SHRT_MAX): Define in terms of __SHRT_MAX__.
2001-07-06 Jan van Male <jan.vanmale@fenk.wau.nl>
* alias.c (base_alias_check): Cast GET_MODE_UNIT_SIZE to int to
avoid warnings.
2001-07-06 Richard Henderson <rth@redhat.com>
* bitmap.c (bitmap_release_memory): Move adjacent to the
allocation functions.
(bitmap_first_set_bit, bitmap_last_set_bit): Streamline knowing
the implementation. Binary search for the set bit.
(bitmap_union_of_diff): Allocate the temporary on the stack
instead of using xmalloc.
2001-07-06 Richard Henderson <rth@redhat.com>
* genrecog.c (validate_pattern): Warn for constraints in
define_{expand,split,peephole2}. Remove strict_low_part
before looking up match_dup.
2001-07-06 DJ Delorie <dj@redhat.com>
* doc/gcc.texi (Makefile): Rename to be a more general purpose
chapter about various build hints and history. Add section
talking about the various types of native and cross builds.
2001-07-06 Neil Booth <neil@daikokuya.demon.co.uk>
* Makefile.in (final.o): Depend on target.h.
* final.c: Include target.h.
(default_function_pro_epilogue): New.
(final_start_function): Use target structure for function prologues.
(final_end_function): Use target structure for function epilogues.
* fold-const.c (real_hex_to_f): Constify s and p.
* output.h (default_function_pro_epilogue): New.
* real.h (real_hex_to_f): Update prototype.
* target-def.h (TARGET_ASM_FUNCTION_PROLOGUE,
TARGET_ASM_FUNCTION_EPILOGUE, TARGET_ASM_OUT): New.
(TARGET_INITIALIZER): Update.
* target.h (gcc_target): Add struct asm_out.
* doc/tm.texi: Update.
config:
Update each arch to use TARGET_ASM_FUNCTION_PROLOGUE and
TARGET_ASM_FUNCTION_EPILOGUE. Move macro code to functions
in cpu/cpu.c, or rename old functions consistently. Take
a HOST_WIDE INT not an int as the SIZE parameter. Remove now
redundant macros and prototypes. Make new functions static.
* 1750a/1750a.c: Similarly.
* 1750a/1750a.h: Similarly.
* a29k/a29k-protos.h: Similarly.
* a29k/a29k.c: Similarly.
* a29k/a29k.h: Similarly.
* arc/arc-protos.h: Similarly.
* arc/arc.c: Similarly.
* arc/arc.h: Similarly.
* arm/arm-protos.h: Similarly.
* arm/arm.c: Similarly.
* arm/arm.h: Similarly.
* avr/avr-protos.h: Similarly.
* avr/avr.c: Similarly.
* avr/avr.h: Similarly.
* clipper/clipper-protos.h: Similarly.
* clipper/clipper.c: Similarly.
* clipper/clipper.h: Similarly.
* convex/convex.c: Similarly.
* convex/convex.h: Similarly.
* d30v/d30v-protos.h: Similarly.
* d30v/d30v.c: Similarly.
* d30v/d30v.h: Similarly.
* d30v/d30v.md: Similarly.
* dsp16xx/dsp16xx-protos.h: Similarly.
* dsp16xx/dsp16xx.c: Similarly.
* dsp16xx/dsp16xx.h: Similarly.
* elxsi/elxsi.c: Similarly.
* elxsi/elxsi.h: Similarly.
* fr30/fr30.c: Similarly.
* fr30/fr30.md: Similarly.
* h8300/h8300-protos.h: Similarly.
* h8300/h8300.c: Similarly.
* h8300/h8300.h: Similarly.
* i370/i370-protos.h: Similarly.
* i370/i370.c: Similarly.
* i370/i370.h: Similarly.
* i386/i386.c: Similarly.
* i386/osf1elf.h: Similarly.
* i386/osfrose.h: Similarly.
* i860/i860-protos.h: Similarly.
* i860/i860.c: Similarly.
* i860/i860.h: Similarly.
* i960/i960-protos.h: Similarly.
* i960/i960.c: Similarly.
* i960/i960.h: Similarly.
* ia64/ia64-protos.h: Similarly.
* ia64/ia64.c: Similarly.
* ia64/ia64.h: Similarly.
* m32r/m32r-protos.h: Similarly.
* m32r/m32r.c: Similarly.
* m32r/m32r.h: Similarly.
* m68hc11/m68hc11-protos.h: Similarly.
* m68hc11/m68hc11.c: Similarly.
* m68hc11/m68hc11.h: Similarly.
* m68k/crds.h: Similarly.
* m68k/dpx2.h: Similarly.
* m68k/m68k-protos.h: Similarly.
* m68k/m68k.c: Similarly.
* m68k/m68k.h: Similarly.
* m68k/news.h: Similarly.
* m88k/m88k-protos.h: Similarly.
* m88k/m88k.c: Similarly.
* m88k/m88k.h: Similarly.
* mips/mips-protos.h: Similarly.
* mips/mips.c: Similarly.
* mips/mips.h: Similarly.
* ns32k/merlin.h: Similarly.
* ns32k/ns32k.c: Similarly.
* ns32k/ns32k.h: Similarly.
* ns32k/tek6000.h: Similarly.
* pa/pa-protos.h: Similarly.
* pa/pa.c: Similarly.
* pa/pa.h: Similarly.
* pdp11/2bsd.h: Similarly.
* pdp11/pdp11-protos.h: Similarly.
* pdp11/pdp11.c: Similarly.
* pdp11/pdp11.h: Similarly.
* romp/romp-protos.h: Similarly.
* romp/romp.c: Similarly.
* romp/romp.h: Similarly.
* rs6000/rs6000-protos.h: Similarly.
* rs6000/rs6000.c: Similarly.
* rs6000/rs6000.h: Similarly.
* rs6000/sysv4.h: Similarly.
* sh/sh-protos.h: Similarly.
* sh/sh.c: Similarly.
* sh/sh.h: Similarly.
* sparc/sparc-protos.h: Similarly.
* sparc/sparc.c: Similarly.
* sparc/sparc.h: Similarly.
* vax/vax.c: Similarly.
* vax/vax.h: Similarly.
* vax/vms.h: Similarly.
* we32k/we32k.c: Similarly.
* we32k/we32k.h: Similarly.
Fri Jul 6 11:47:59 2001 Jeffrey A Law (law@cygnus.com)
* basic-block.h (first_insn_after_basic_block_note): Declare.
* flow.c (first_insn_after_basic_block_note): Define. Moved
from...
* ssa.c (first_insn_after_basic_block_note): Remove.
* ssa-dce.c (find_inherently_necessary): Consider BARRIERs
necessary.
(ssa_eliminate_dead_code): Properly update the CFG and PHI
nodes when we find a dead conditional branch. Insert BARRIERs
after any blocks with no successors, but which do not have
any BARRIERs.
2001-07-06 Zack Weinberg <zackw@stanford.edu>
* varray.c (varray_check_failed): Use internal_error.
2001-07-05 Andrew Haley <aph@redhat.com>
* Makefile.in (LIB2_DIVMOD_FUNCS): New.
(LIB2FUNCS): Move divmod functions to LIB2_DIVMOD_FUNCS.
* mklibgcc.in: Compile LIB2_DIVMOD_FUNCS.
2001-07-02 Jason Merrill <jason_merrill@redhat.com>
* dwarf2out.c (mem_loc_descriptor): Only look through a constant pool
reference if the target constant is also a SYMBOL_REF.
2001-07-05 Eric Christopher <echristo@redhat.com>
* config/mips/mips.h (MASK_MIPS3900): Remove.
(MASK_MIPS16,MASK_NO_CHECK_ZERO_DIV,MASK_CHECK_RANGE_DIV,
MASK_UNINIT_CONST_IN_RODATA): Change for 3900 mask removal.
(TARGET_MIPS3900): Change to use mips_arch.
(TARGET_MIPS4000): New.
(TARGET_MIPS4100): New.
(TARGET_MIPS4300): New.
(TARGET_SWITCHES): Change 3900 and 4650 options to NULL.
(SUBTARGET_TARGET_OPTIONS): Add -march. Change help text
for -mipsX.
(GENERATE_BRANCHLIKELY): Move TARGET_MIPS3900.
(ISA_HAS_BRANCHLIKELY): To here.
(CC1_CPU_SPEC): New.
(CC1_SPEC): Use here. Remove 4650 and 3900 options.
(mips_arch_string): Declare.
(mips_arch): Declare.
(TARGET_OPTIONS): Add -march and -mtune.
* config/mips/mips.c (mips_arch_string): New.
(mips_arch): New.
(override_options): Handle -march for codegen and -mtune
for scheduling. Use mips_arch. Move tx39 target default here.
(mips_parse_cpu): Move error message to override_options.
* config/mips/r3900.h (TARGET_DEFAULT): Remove.
* config/mips/mips.md: Use TARGET_MIPS4000 and TARGET_MIPS4300.
* doc/invoke.texi (Option Summary): Add -march and -mtune entries.
(MIPS Options): Ditto. Change mcpu entry to historical text.
2001-07-05 H.J. Lu (hjl@gnu.org)
* config/mips/mips.c (mips_parse_cpu): New function to parse
-march=*/-mcpu=*.
2001-07-05 Jim Wilson <wilson@redhat.com>
* config/ia64/lib1funcs.asm: Revert 2001-07-02 change.
* config/ia64/t-ia64: Likewise.
(LIB1ASMFUNCS): Update comment.
2001-07-05 David Edelsohn <edelsohn@gnu.org>
* doc/install.texi (Install GCC: Binaries): Fix typo.
2001-07-04 Stephane Carrez <Stephane.Carrez@worldnet.fr>
* config/m68hc11/m68hc11.md ("*ashlsi3"): Operand 1 can be a memory
reference using the stack pointer, adjust it since we push Y
temporarily.
("*ashrsi3"): Likewise.
("*lshrsi3"): Likewise.
2001-07-05 Stephane Carrez <Stephane.Carrez@worldnet.fr>
* config/m68hc11/m68hc11.h (RETURN_ADDR_RTX): Fix return address
when -fomit-frame-pointer is used.
2001-07-05 Jeffrey Oldham <oldham@codesourcery.com>
* flow.c: Reverse Jan Hubicka's patch of 02July2001.
(try_redirect_by_replacing_jump): Reverse updating properly the
count and frequency information. Reverse removing cc0 setter.
(forwarder_block_p): Reverse fixing for fallthru blocks.
2001-07-05 DJ Delorie <dj@redhat.com>
* gcc.c (TARGET_OPTION_TRANSLATE_TABLE): New.
(translate_options): If the above is defined, use it to map
given options to new options.
* doc/tm.texi: Document it.
2001-07-05 Brad Lucier <lucier@math.purdue.edu>
Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at>
* doc/invoke.texi (Optimize Options): Document that -fgcse may
cause programs using computed gotos to run more slowly.
2001-07-05 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
* doc/install.texi (Specific): Markup, spelling and typo fixes.
Fixed sorting.
Consistently require binutils 2.11.2, not prereleases.
(Specific, decstation-*): Canonicalize as mips-dec-*.
(Specific, i?86-*-sco3.2v5*): Remove make bootstrap requirement,
always necessary.
(Specific, m68k-altos): Removed reference to README.altos, deleted.
(Specific, mips-*): Reword MIPS C compiler requirements.
(Specific, powerpc*-*-*): New, mention --with-cpu once.
(Specific, sunv5): Removed, obsolete.
2001-07-05 Nathan Sidwell <nathan@codesourcery.com>
* dwarf2out.c (output_loc_list): Use an all ones mask for
.text asm output and don't rely on long long
literals. Reformat some long lines.
2001-07-05 Andreas Jaeger <aj@suse.de>
* doc/gcc.texi (GNU/Linux): Remove accidental re-add of GPL
section.
2001-07-04 Daniel Berlin <dan@cgsoftware.com>
* dwarf2out.c (dwarf2out_define): Update comment.
(dwarf2out_undef): Ditto.
(dwarf2out_start_source_file): Ditto.
(dwarf2out_end_source_file): Ditto.
(dwarf2out_finish): Output DW_MACINFO_end_file for primary file,
since we never call the start/end debug hook for the primary file.
2001-07-04 Kazu Hirata <kazu@hxi.com>
* config/h8300/h8300.c (get_shift_alg): Remove an extra operand
from shll.
2001-07-04 Nathan Sidwell <nathan@codesourcery.com>
* cppinit.c (remove_dup_dirs): Inform if a system include
directory is being reordered.
* doc/invoke.texi (Directory Options): GCC warns if you hide a
system include.
* doc/cpp.texi (Search Paths): Likewise.
* doc/gcc.texi (Interoperation): Remove information about
-I/usr/include.
2001-07-04 Nathan Sidwell <nathan@codesourcery.com>
* varray.h (VARRAY_TOP_GENERIC_PTR): Remove spurious parameter.
(VARRAY_TOP_CHAR_PTR): Likewise.
2001-07-04 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* gcc.c (process_command): Don't assign elements of a const char*.
Wed Jul 4 13:40:02 2001 Richard Kenner <kenner@vlsi1.ultra.nyu.edu>
* emit-rtl.c (change_address): Don't abort if invalid address while
reload is in progress.
2001-07-04 Daniel Berlin <dan@cgsoftware.com>
* c-lex.c (cb_file_change): Pass line number to
debug_start_source_file.
(cb_undefine): Pass correct line number to debug_undef.
* toplev.c (debug_start_source_file): Add line number to
parameters. Pass it along to dwarf2out_start_source_file.
(decode_g_option): Stop resetting debug level back to normal when
we change debug formats, unless the current level is
none. (Before, -g3 -gdwarf-2 would use debug level 2, rather than
3).
* toplev.h (debug_start_source_file): Add line number to
parameters.
* dwarf2out.h (dwarf2out_start_source_file): Add line number to
parameters.
* dwarf2out.c (dwarf2out_start_source_file): Add line number to
parameters.
Output debug_macinfo data for starting file if requested.
(dwarf2out_end_source_file): Output debug_macinfo data for ending
file if requested.
(dwarf2out_define): Output debug_macinfo data for defining a macro
if requested.
(dwarf2out_undef): Output debug_macinfo data for undefining a
macro if requested.
(DEBUG_MACINFO_SECTION): New. DWARF2 macro info section name.
(DEBUG_MACINFO_SECTION_LABEL): New. DWARF2 macro info section label.
(macinfo_section_label): New. DWARF2 macro info section label.
(dwarf2out_init): If we want macro info, output the start label
for the section.
(dwarf2out_finish): If we want macro info, add a DW_AT_macro_info
attribute to the compilation unit die pointing to the macro info.
2001-07-04 Daniel Berlin <dan@cgsoftware.com>
* dwarf2out.c (new_loc_list): Move to inside #ifdef
DWARF2_DEBUGGING_INFO.
(add_loc_descr_to_loc_list): Ditto.
(output_loc_list): Ditto.
Also, fix thinko in curr not being initialized.
(gen_internal_sym): Ditto.
Wed Jul 4 13:40:02 2001 Richard Kenner <kenner@vlsi1.ultra.nyu.edu>
* emit-rtl.c (replace_equiv_address): New function.
* expr.h (replace_equiv_address): New declaration.
* explow.c (validize_mem): Call it instead of change_address and
also call if -fforce-addr and address is constant.
* expr.c: Replace more calls to change_address with adjust_address
and/or replace_equiv_address or to validize_mem.
* function.c, regmove.c, config/alpha/alpha.c: Likewise.
* config/arm/arm.md, config/clipper/clipper.md: Likewise.
* config/dsp16xx/dsp16xx.md, config/fr30/fr30.c: Likewise.
* config/i370/i370.md, config/i860/i860.md: Likewise.
* config/i960/i960.md, config/mips/mips.c: Likewise.
* config/mips/mips.md, config/pa/pa.md: Likewise.
* config/pdp11/pdp11.md, config/rs6000/rs6000.c: Likewise.
* config/rs6000/rs6000.md, config/sh/sh.md: Likewise.
2001-07-04 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* bitmap.c (bitmap_union_of_diff): Don't use BITMAP_ALLOCA.
* bitmap.h (BITMAP_ALLOCA): Don't pass alloca as an argument to a
function.
2001-07-04 Joseph S. Myers <jsm28@cam.ac.uk>
* doc/include: New directory.
* doc/fdl.texi: Move to doc/include/fdl.texi.
* doc/texinfo.tex: Move to doc/include/texinfo.tex.
* doc/include/funding.texi, doc/include/gpl.texi: New files.
* doc/gcc.texi: Use funding.texi and gpl.texi.
* Makefile.in ($(docdir)/cpp.info, $(docdir)/gcc.info,
$(docdir)/cppinternals.info, cpp.dvi. gcc.dvi. cppinternals.dvi):
Update dependencies and use -I $(docdir)/include.
2001-07-04 Anthony Green <green@redhat.com>
* config/v850/t-v850 (v850-c.o): Add missing dependencies.
2001-07-04 Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at>
* doc/install.texi (sparc64-*-*): Remove garbage.
Wed Jul 4 09:07:44 2001 Jan van Male <jan.vanmale@fenk.wau.nl>
* i386.c (ix86_expand_builtin, case IX86_BUILTIN_SETPS):
Fix typo in last change to use adjust_address.
2001-07-04 Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at>
* doc/install.texi (Specific): Update information for *-*-solaris*.
Tue Jul 3 22:33:15 2001 Richard Kenner <kenner@vlsi1.ultra.nyu.edu>
* explow.c (plus_constant_wide): Reinitialize Y for restart.
2001-07-03 Stan Shebs <shebs@apple.com>
* config/darwin.h (SECTION_FUNCTION): Remove WAS_TEXT argument, remove
case for flag_no_mach_text_sections.
(EXTRA_SECTION_FUNCTIONS): Remove arg from uses of SECTION_FUNCTION.
* config/darwin.c (flag_no_mach_text_sections): Remove.
* config/darwin-protos.h (darwin_init_pragma): Remove decl.
Tue Jul 3 15:35:52 2001 Richard Kenner <kenner@vlsi1.ultra.nyu.edu>
* explow.c (plus_constant_wide, case PLUS): Call find_constant_term
and avoid checking for constant as first operand.
* recog.c (find_constant_term_loc): No longer static.
(adj_offettable_operand): Delete.
* rtl.h (adj_offsettable_operand): Delete declaration.
(find_constant_term): Add declaration.
* caller-save.c: Replace calls to adj_offsettable_operand with calls
to adjust_address.
* config/arm/arm.c, config/c4x/c4x.c: Likewise.
* config/clipper/clipper.md, config/h8300/h8300.c: Likewise.
* config/i386/i386.c, config/i386/i386.md: Likewise.
* config/i860/i860.c, config/i960/i960.c: Likewise.
* config/i960/i960.md, config/m68hc11/m68hc11.c: Likewise.
* config/m68k/m68k.c, config/m68k/m68k.md: Likewise.
* config/m88k/m88k.md, config/mcore/mcore.c: Likewise.
* config/mips/mips.c, config/mips/mips.md: Likewise.
* config/mn10200/mn10200.c, config/mn10300/mn10300.c: Likewise.
* config/ns32k/ns32k.c, config/ns32k/ns32k.md: Likewise.
* config/pa/pa.c, config/pdp11/pdp11.c: Likewise.
* config/pdp11/pdp11.md, config/sh/sh.c, config/v850/v850.c: Likewise.
* config/vax/vax.md, config/ns32k/ns32k.c: Likewise.
* config/ns32k/ns32k.md: Likewise.
2001-07-03 Zack Weinberg <zackw@stanford.edu>
* rtl.c (copy_rtx): Handle 'T' format letter.
* gensupport.c (collect_insn_data): Likewise.
* print-rtl.c (print_rtx): Print 'T' slots like 's'.
2001-07-03 Nick Clifton <nickc@cambridge.redhat.com>
* doc/invoke.texi (Directory Options): Specifiy range for <N> in
-B option. Use 'dir' not 'foo' as example directory name.
2001-07-03 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
* config/i386/sol2.h (ASM_PREFERRED_EH_DATA_FORMAT): Define.
Fixes PRs bootstrap/3067, bootstrap/3249, bootstrap/3275.
2001-07-03 Joseph S. Myers <jsm28@cam.ac.uk>
* doc/cppinternals.texi: Improve formatting and logical markup.
2001-07-03 Andreas Jaeger <aj@suse.de>
* Makefile.in (insn-recog.o): Add dependency on reload.h.
* genrecog.c (write_header): Include reload.h for prototypes in
insn-recog.c.
2001-07-03 Neil Booth <neil@daikokuya.demon.co.uk>
config:
* i386/cygwin.h (VALID_MACHINE_DECL_ATTRIBUTE,
VALID_MACHINE_TYPE_ATTRIBUTE): Remove.
* i386/i386-protos.h (i386_pe_valid_decl_attribute_p,
i386_pe_valid_type_attribute_p): Add.
* i386/i386.c (TARGET_INITIALIZER): Override for cygwin targets.
* i386/winnt.c (i386_valid_decl_attribute_p): Return directly.
Mon Jul 2 21:52:19 2001 Richard Kenner <kenner@vlsi1.ultra.nyu.edu>
* explow.c (plus_constant_wide, case LO_SUM): New case.
(plus_constant_for_output_wide): Delete.
* rtl.h (plus_constant_for_output): Delete.
* alias.c (canon_rtx, init_alias_analysis): Call plus_constant
instead of plus_constant_for_output.
* recog.c (offsettable_address_p, adj_offsettable_operand): Likewise.
* config/darwin.c, config/arm/arm.c, config/m68k/m68k.c: Likewise.
* config/m88k/m88k.c, config/mips/mips.c, config/pa/pa.c: Likewise.
* config/rs6000/rs6000.c, config/sparc/sparc.c: Likewise.
* config/sparc/sparc.md: Likewise.
Convert some change_address calls to adjust_address.
2001-07-03 Joseph S. Myers <jsm28@cam.ac.uk>
* doc/extend.texi, doc/gcc.texi, doc/invoke.texi, doc/md.texi,
doc/rtl.texi, doc/tm.texi: Improve formatting. Improve
documentation of -std and -Wwrite-strings.
2001-07-02 Geoffrey Keating <geoffk@redhat.com>
* cse.c (canon_hash): Don't register registers in very small
register classes, as extending their lifetime might cause
reload to fail.
Mon Jul 2 23:14:00 CEST 2001 Jan Hubicka <jh@suse.cz>
* flow.c (try_redirect_by_replacing_jump): Remove cc0 setter.
* flow.c (forwarder_block_p): Fix for fallthru blocks.
(try_redirect_by_replacing_jump): Update properly the count
and frequency information.
Mon Jul 2 14:20:13 2001 Jeffrey A Law (law@cygnus.com)
* toplev.c (dump_file_index): Move SSA dumps just after first
jump dump.
(dump_file): Corresponding changes.
(rest_of_compilation): Move SSA path to just after the first
jump pass.
* doc/gcc.texi (Passes): Update due to movement of SSA path.
* doc/invoke.texi: Update dump file #s as they were completely
out of date with reality.
2001-07-02 Geoffrey Keating <geoffk@redhat.com>
* doc/tm.texi (Frame Layout): Document STACK_PUSH_CODE.
* expr.c (emit_move_insn_1): Deal with non-default
STACK_PUSH_CODE.
* expr.c (emit_single_push_insn): Fix warning.
2001-07-02 Toshiyasu Morita <toshiyasu.morita@hsa.hitachi.com>
* expr.c (emit_move_insn_1): Avoid modifying
cfun->expr->x_stack_pointer when PUSH_ROUNDING is defined.
Mon Jul 2 15:33:31 2001 Richard Kenner <kenner@vlsi1.ultra.nyu.edu>
* emit-rtl.c (adjust_address): New function.
* expr.h (adjust_address): Add declaration.
* builtins.c: Replace some calls to change_address with calls to it
or to validize_mem.
* caller-save.c, dwarf2out.c, except.c, expmed.c, expr.c: Likewise.
* function.c, config/a29k/a29k.md, config/alpha/alpha.c: Likewise.
* config/arm/arm.c, config/convex/convex.c: Likewise.
* config/dsp16xx/dsp16xx.md, config/fr30/fr30.c: Likewise.
* config/i386/i386.c, config/i386/i386.md: Likewise.
* config/ia64/ia64.c, config/ia64/ia64.md: Likewise.
* config/m32r/m32r.c, config/m68k/m68k.md: Likewise.
* config/m88k/m88k.c, config/mips/mips.md: Likewise.
* config/ns32k/ns32k.c, config/rs6000/rs6000.c: Likewise.
* config/sh/sh.c, config/sparc/sparc.md: Likewise.
2001-07-02 Jim Wilson <wilson@redhat.com>
* config/ia64/ia64.h: Delete obsolete lib1funcs.asm comment.
2001-07-02 Steve Ellcey <sje@cup.hp.com>
* config/ia64/t-ia64: Change LIB1ASMFUNCS to use single underscore.
* config/ia64/lib1funcs.asm: Change macro names to match t-ia64.
2001-07-02 Zack Weinberg <zackw@stanford.edu>
* cppinit.c (lang_defaults): New table.
(set_lang): Just read from lang_defaults into the live options
structure.
2001-07-02 Zack Weinberg <zackw@stanford.edu>
* Makefile.in (doc): Depend on $(GENERATED_MANPAGES).
* doc/.cvsignore: Add gcc.1, cpp.1, gcov.1.
* doc/gcc.1, doc/cpp.1, doc/gcov.1: Removed.
2001-07-02 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
* doc/install.texi: Various spelling and markup fixes.
(Installing GCC): Component specific installation instructions are
gone.
Fix reference.
Warn about removing old install dir in the presence of shared libs.
(Configuration): Invoke with options target to match configure
--help.
Consistently refer to gas, gld pathnames.
Invert --enable-multilib documentation.
Remove references to old compiler versions.
Mon Jul 2 12:50:51 2001 Richard Kenner <kenner@vlsi1.ultra.nyu.edu>
* flow.c (try_simplify_condjump): Fix typo in updating fallthru flags.
2001-07-02 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
* doc/install.texi (Specific, mips*-sgi-irix4): Split from IRIX 5
section.
(Specific, mips*-sgi-irix5): Note IDO download.
Reworded MIPS C hints.
Use GNU as instead of GAS.
Markup fixes.
Removed SGI Freeware reference, IRIX 6 only.
(Specific, mips*-sgi-irix6): Removed ranlib caveats, obsolete.
Note N64 library requirement/workaround.
Update O32 hints.
Complete list of structure passing bug victims.
2001-07-02 Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at>
* doc/install.texi: Remove CVS Id.
2001-07-02 Andreas Jaeger <aj@suse.de>
* ssa-dce.c (note_inherently_necessary_set): Add unused attribute.
(find_inherently_necessary): Remove unused variable.
2001-07-02 Nathan Sidwell <nathan@codesourcery.com>
* c-common.h (TDI_inlined): New ast dump phase.
(dump_flag_name): New function.
* c-dump.c (dump_files): Add inlined phase.
(dump_flag_name): Define.
* doc/invoke.texi (-fdump-ast-inlined): Document.
Mon Jul 2 06:29:36 2001 Richard Kenner <kenner@vlsi1.ultra.nyu.edu>
* stor-layout.c (layout_decl): Revert change to handling of alignment
in packed types.
Sun Jul 1 11:53:52 2001 Richard Kenner <kenner@vlsi1.ultra.nyu.edu>
* c-common.c (decl_attributes, case A_MODE): Don't call layout_decl
for FIELD_DECL.
2001-07-01 Geoffrey Keating <geoffk@redhat.com>
* doc/tm.texi (FUNCTION_ARG): Document that the last call
is special.
2001-07-01 Nathan Sidwell <nathan@codesourcery.com>
* tlink.c (recompile_files): Remove COMPILER_PATH and
LIBRARY_PATH from the environment.
2001-07-01 Zack Weinberg <zackw@stanford.edu>
* c-common.h (enum rid): Add RID_FIRST_AT, RID_LAST_AT,
RID_LAST_PQ. Move RID_FIRST_PQ down with the other FIRST/LAST
enumerators.
(OBJC_IS_AT_KEYWORD, OBJC_IS_PQ_KEYWORD): New macros.
* c-parse.in (OBJC_STRING): Kill.
(objc_string): Decompose to [objc_string] '@' STRING.
(reswords): Take the leading '@' off all the Objective C keywords.
(objc_rid_sans_at): Kill.
(init_reswords): Don't initialize it.
(yylexname): Use OBJC_IS_AT_KEYWORD and OBJC_IS_PQ_KEYWORD.
(_yylex): Kill reconsider label. Look ahead one token after
an '@'; if we get an identifier, check whether it's an
Objective C @-keyword. If so, return the keyword. Otherwise,
put back the token and return the '@' as a terminal.
* cpplib.c (lex_macro_node): Remove unnecessary check for
leading '@' on identifier. Clarify control flow and commentary.
Sun Jul 1 11:53:52 2001 Richard Kenner <kenner@vlsi1.ultra.nyu.edu>
* cse.c (new_label_ref): Variable deleted.
(insert): Remove set of new_label_ref.
(check_for_label_ref): New function.
(cse_basic_block): Don't check new_label_ref; call check_for_label_ref.
See ChangeLog.5 for earlier changes.
From-SVN: r43861
Implement vtable jumps for x86-64.
From-SVN: r43860
Daily bump.
From-SVN: r43859
* tm.texi: Fix markup.
From-SVN: r43857
final.c (output_addr_const): Use target opening and closing parentheses.
* final.c (output_addr_const): Use target opening and
closing parentheses.
* target-def.h: Define TARGET_ASM_OPEN_PAREN, TARGET_ASM_CLOSE_PAREN
defaults, add to TARGET_ASM_OUT.
* target.h (struct gcc_target): Add open_paren and close_paren.
* doc/md.texi: Update.
* doc/tm.texi: Document TARGET_ASM_FUNCTION_END_PROLOGUE,
TARGET_ASM_FUNCTION_BEGIN_EPILOGUE, TARGET_ASM_OPEN_PAREN and
TARGET_ASM_CLOSE_PAREN.
config:
* i386/i386.c (TARGET_ASM_OPEN_PAREN, TARGET_ASM_CLOSE_PAREN):
Override.
* pdp11/pdp11.c (TARGET_ASM_OPEN_PAREN, TARGET_ASM_CLOSE_PAREN):
Override.
* 1750a/1750a.h (ASM_OPEN_PAREN, ASM_CLOSE_PAREN): Remove.
* a29k/a29k.h: Similarly.
* alpha/alpha.h: Similarly.
* arc/arc.h: Similarly.
* arm/aof.h: Similarly.
* arm/aout.h: Similarly.
* avr/avr.h: Similarly.
* c4x/c4x.h: Similarly.
* clipper/clipper.h: Similarly.
* convex/convex.h: Similarly.
* d30v/d30v.h: Similarly.
* dsp16xx/dsp16xx.h: Similarly.
* elxsi/elxsi.h: Similarly.
* fr30/fr30.h: Similarly.
* h8300/h8300.h: Similarly.
* i370/i370.h: Similarly.
* i386/i386.h: Similarly.
* i860/i860.h: Similarly.
* i960/i960.h: Similarly.
* ia64/ia64.h: Similarly.
* m32r/m32r.h: Similarly.
* m68hc11/m68hc11.h: Similarly.
* m68k/m68k.h: Similarly.
* m88k/m88k.h: Similarly.
* mcore/mcore.h: Similarly.
* mips/mips.h: Similarly.
* mn10200/mn10200.h: Similarly.
* mn10300/mn10300.h: Similarly.
* ns32k/ns32k.h: Similarly.
* pa/pa.h: Similarly.
* pdp11/pdp11.h: Similarly.
* pj/pj.h: Similarly.
* romp/romp.h: Similarly.
* rs6000/rs6000.h: Similarly.
* sh/sh.h: Similarly.
* sparc/sparc.h: Similarly.
* v850/v850.h: Similarly.
* vax/vax.h: Similarly.
* we32k/we32k.h: Similarly.
From-SVN: r43856
* doc/c-tree.texi: Document representation of attributes.
From-SVN: r43854
tm.texi: Update some places for the rename of target to targetm.
* doc/tm.texi: Update some places for the rename of target to
targetm. Fix typo.
From-SVN: r43852
target.h (struct gcc_target): Add insert_attributes.
* target.h (struct gcc_target): Add insert_attributes.
* target-def.h (TARGET_INSERT_ATTRIBUTES): Define.
(TARGET_INITIALIZER): Update.
* tree.c, tree.h (default_insert_attributes): New function.
Update comments on other default functions to refer to targetm,
not target.
* doc/tm.texi (INSERT_ATTRIBUTES): Update to document
TARGET_INSERT_ATTRIBUTES.
(SET_DEFAULT_DECL_ATTRIBUTES): Remove.
* c-common.c (decl_attributes): Use targetm.insert_attributes.
Don't use PRAGMA_INSERT_ATTRIBUTES.
* Makefile.in (c-common.o): Depend on $(TARGET_H).
* c-decl.c (start_decl, start_function): Don't call
SET_DEFAULT_DECL_ATTRIBUTES.
* config/c4x/c4x.h (SET_DEFAULT_DECL_ATTRIBUTES): Don't define.
* config/c4x/c4x-protos.h (c4x_set_default_attributes): Don't
declare.
* config/c4x/c4x.c (TARGET_INSERT_ATTRIBUTES): Define.
(c4x_check_attribute): Avoid modifying attribute list itself.
(c4x_set_default_attributes): Rename to c4x_insert_attributes.
Make static.
* config/sh/sh.h (PRAGMA_INSERT_ATTRIBUTES): Don't define.
* config/sh/sh-protos.h (sh_pragma_insert_attributes): Don't
declare.
* config/sh/sh.c (TARGET_INSERT_ATTRIBUTES): Define.
(sh_pragma_insert_attributes): Rename to sh_insert_attributes.
Make static.
* config/v850/v850.h (SET_DEFAULT_DECL_ATTRIBUTES): Don't define.
* config/v850/v850-protos.h (v850_set_default_decl_attr): Don't
declare.
* config/v850/v850.c (TARGET_INSERT_ATTRIBUTES): Define.
(v850_set_default_decl_attr): Rename to v850_insert_attributes.
Adjust parameters. Make static.
cp:
* decl.c (start_decl): Don't call SET_DEFAULT_DECL_ATTRIBUTES.
(start_function): Don't call SET_DEFAULT_DECL_ATTRIBUTES. Call
cplus_decl_attributes even if attrs is NULL.
* friend.c (do_friend): Don't call SET_DEFAULT_DECL_ATTRIBUTES.
From-SVN: r43851
final.c (no_asm_to_stream): New.
* final.c (no_asm_to_stream): New.
(final_scan_insn): Use target structures for prologue ends
and epilogue starts.
* output.h (no_asm_to_stream): New.
* target-def.h (TARGET_ASM_FUNCTION_END_PROLOGUE,
TARGET_ASM_FUNCTION_BEGIN_EPILOGUE): New.
(TARGET_ASM_OUT): Update.
* target.h (struct gcc_target): New members function_end_prologue
and function_begin_epilogue.
config:
* 1750/1750.h (ASM_OUTPUT_FUNNAM): Delete as unused.
* alpha/alpha-protos.h (output_end_prologue): Delete.
* alpha/alpha.c (output_end_prologue): Rename to
alpha_output_function_end_prologue. Use in target struct
and make static.
* alpha/alpha.h (FUNCTION_END_PROLOGUE): Delete.
* ia64/ia64-protos.h (ia64_output_end_prologue): Delete.
* ia64/ia64.c (ia64_output_end_prologue): Rename to
ia64_output_function_end_prologue. Use in target struct
and make static.
(ia64_function_prologue, ia64_funciton_epilogue): Rename
mistyped prototypes.
* ia64/ia64.h (FUNCTION_END_PROLOGUE): Delete.
* m88k/m88k-protos.h (m88k_end_prologue, m88k_begin_epilogue): Delete.
* m88k/m88k.c (m88k_end_prologue, m88k_begin_epilogue): Rename
an use in target struct, make static.
* ia64/ia64.h (FUNCTION_END_PROLOGUE, FUNCTION_BEGIN_EPILOGUE): Delete.
From-SVN: r43849
* stmt.c (emit_case_nodes): Convert modes properly in low+high test.
From-SVN: r43847
i386.md: Remove constraints strings from define_split and define_peephole2 patterns.
* config/i386/i386.md: Remove constraints strings from define_split
and define_peephole2 patterns.
(eh_return_si, eh_return_di): Split eh_return_1 for modes.
(eh_return): Use them.
From-SVN: r43846
Daily bump.
From-SVN: r43845
tm.texi (Exception Handling): New subnode of Stack and Calling.
* doc/tm.texi (Exception Handling): New subnode of Stack and Calling.
Document MD_FALLBACK_FRAME_STATE_FOR.
From-SVN: r43843
Update email address.
From-SVN: r43842
Makefile.in: Update config.h dependencies.
2001-07-07 Toon Moene <toon@moene.indiv.nluug.nl>
* libI77/Makefile.in: Update config.h dependencies.
* libI77/configure.in: Define _XOPEN_SOURCE and
_FILE_OFFSET_BITS unconditionally.
* libI77/configure: Rebuilt.
* libI77/config.h.in: Rebuilt.
* libI77/endfile.c (t_runc): Replace rewind by FSEEK.
* libI77/err.c (f__nowwriting): The type of `loc' is off_t.
* libI77/open.c (f_open): Replace rewind by FSEEK.
* libI77/rewind.c: Include config.h. (f_rew): Replace
rewind by FSEEK.
* libI77/sfe.c: Include config.h.
* libI77/wsfe.c: Ditto.
* libU77/configure.in: Define _XOPEN_SOURCE and
_FILE_OFFSET_BITS unconditionally.
* libU77/configure: Rebuilt.
* libU77/config.hin: Rebuilt.
From-SVN: r43841
* verify.c: Don't use // comments.
From-SVN: r43840
m68hc11.c (m68hc11_initial_elimination_offset): Take into account m68hc11_sp_correction for FRAME_POINTER_REGNUM elimination.
* config/m68hc11/m68hc11.c (m68hc11_initial_elimination_offset):
Take into account m68hc11_sp_correction for FRAME_POINTER_REGNUM
elimination.
* config/m68hc11/m68hc11.h (STARTING_FRAME_OFFSET): Use 0.
From-SVN: r43838
Append # to end of the label inside NAME as opposed to just the end of NAME.
From-SVN: r43837
Makefile.am (libgcj.jar): Don't recursively make built_java_source_files.
* Makefile.am (libgcj.jar): Don't recursively make
built_java_source_files. Avoid long command lines.
Don't change to $(srcdir) to invoke javac.
(libgcj.la, libgcjx.la); Avoid long command lines.
($(nat_headers),$(x_nat_headers)): Depend on libgcj.jar.
* Makefile.in: Rebuilt.
From-SVN: r43836
Makefile.in: Add necessary dependencies on config.h.
2001-07-07 Toon Moene <toon@moene.indiv.nluug.nl>
* libI77/Makefile.in: Add necessary dependencies on config.h.
Co-Authored-By: Pedro Vazquez <vazquez@penelope.iqm.unicamp.br>
From-SVN: r43835
Daily bump.
From-SVN: r43833
alpha-protos.h (vms_valid_decl_attribute_p): Delete.
* config/alpha/alpha-protos.h (vms_valid_decl_attribute_p): Delete.
* config/alpha/alpha.c (alpha_init_machine_status,
alpha_mark_machine_status, alpha_free_machine_status): Delete.
(TARGET_VALID_DECL_ATTRIBUTE): Define for VMS.
(vms_valid_decl_attribute_p): Make static, conditionally compile.
* config/alpha/alpha.h (VALID_MACHINE_DECL_ATTRIBUTE): Delete.
From-SVN: r43832
target.h (targetm): Rename global from "target", so as not to conflict with local variables.
* target.h (targetm): Rename global from "target", so as not to
conflict with local variables.
* c-decl.c: Ditto.
* c-typeck.c: Ditto.
* final.c: Ditto.
* tree.c: Ditto.
* cp/decl.c: Ditto.
* cp/decl2.c: Ditto.
* cp/typeck.c: Ditto.
* 1750a/1750a.c: Ditto.
* a29k/a29k.c: Ditto.
* arc/arc.c: Ditto.
* arm/arm.c: Ditto.
* avr/avr.c: Ditto.
* clipper/clipper.c: Ditto.
* convex/convex.c: Ditto.
* d30v/d30v.c: Ditto.
* dsp16xx/dsp16xx.c: Ditto.
* elxsi/elxsi.c: Ditto.
* fr30/fr30.c: Ditto.
* h8300/h8300.c: Ditto.
* i370/i370.c: Ditto.
* i386/i386.c: Ditto.
* i860/i860.c: Ditto.
* i960/i960.c: Ditto.
* ia64/ia64.c: Ditto.
* m32r/m32r.c: Ditto.
* m68hc11/m68hc11.c: Ditto.
* m68k/m68k.c: Ditto.
* m88k/m88k.c: Ditto.
* mips/mips.c: Ditto.
* ns32k/ns32k.c: Ditto.
* pa/pa.c: Ditto.
* pdp11/pdp11.c: Ditto.
* romp/romp.c: Ditto.
* rs6000/rs6000.c: Ditto.
* sh/sh.c: Ditto.
* sparc/sparc.c: Ditto.
* vax/vax.c: Ditto.
* we32k/we32k.c: Ditto.
* doc/tm.texi: Update the manual to match.
From-SVN: r43831
except.h (MUST_USE_SJLJ_EXCEPTIONS): Examine the value of DWARF2_UNWIND_INFO not just whether it is defined.
* except.h (MUST_USE_SJLJ_EXCEPTIONS): Examine the value of
DWARF2_UNWIND_INFO not just whether it is defined.
From-SVN: r43829
combine.c (combine_simplify_rtx): Also recompute 'mode' if the call to simplify_binary_operation returns a new...
2001-07-06 Diego Novillo <dnovillo@redhat.com>
* combine.c (combine_simplify_rtx): Also recompute 'mode' if the
call to simplify_binary_operation returns a new pattern.
From-SVN: r43826
glimits.h (__SHRT_MAX__): New.
* glimits.h (__SHRT_MAX__): New.
(SHRT_MIN, USHRT_MAX): Define in terms of SHRT_MAX.
(SHRT_MAX): Define in terms of __SHRT_MAX__.
From-SVN: r43825
* gettextP.h (SWAP): Change parameter type to unsigned int.
From-SVN: r43824
alias.c (base_alias_check): Cast GET_MODE_UNIT_SIZE to int to avoid warnings.
* alias.c (base_alias_check): Cast GET_MODE_UNIT_SIZE to int to
avoid warnings.
From-SVN: r43823
bitmap.c (bitmap_release_memory): Move adjacent to the allocation functions.
* bitmap.c (bitmap_release_memory): Move adjacent to the
allocation functions.
(bitmap_first_set_bit, bitmap_last_set_bit): Streamline knowing
the implementation. Binary search for the set bit.
(bitmap_union_of_diff): Allocate the temporary on the stack
instead of using xmalloc.
From-SVN: r43822
genrecog.c (validate_pattern): Warn for constraints in define_{expand,split,peephole2}.
* genrecog.c (validate_pattern): Warn for constraints in
define_{expand,split,peephole2}. Remove strict_low_part
before looking up match_dup.
From-SVN: r43821
gcc.texi (Makefile): Rename to be a more general purpose chapter about various build hints and history.
* doc/gcc.texi (Makefile): Rename to be a more general purpose
chapter about various build hints and history. Add section
talking about the various types of native and cross builds.
From-SVN: r43819
Makefile.in (final.o): Depend on target.h.
* Makefile.in (final.o): Depend on target.h.
* final.c: Include target.h.
(default_function_pro_epilogue): New.
(final_start_function): Use target structure for function prologues.
(final_end_function): Use target structure for function epilogues.
* fold-const.c (real_hex_to_f): Constify s and p.
* output.h (default_function_pro_epilogue): New.
* real.h (real_hex_to_f): Update prototype.
* target-def.h (TARGET_ASM_FUNCTION_PROLOGUE,
TARGET_ASM_FUNCTION_EPILOGUE, TARGET_ASM_OUT): New.
(TARGET_INITIALIZER): Update.
* target.h (gcc_target): Add struct asm_out.
* doc/tm.texi: Update.
config:
Update each arch to use TARGET_ASM_FUNCTION_PROLOGUE and
TARGET_ASM_FUNCTION_EPILOGUE. Move macro code to functions
in cpu/cpu.c, or rename old functions consistently. Take
a HOST_WIDE INT not an int as the SIZE parameter. Remove now
redundant macros and prototypes. Make new functions static.
* 1750a/1750a.c: Similarly.
* 1750a/1750a.h: Similarly.
* a29k/a29k-protos.h: Similarly.
* a29k/a29k.c: Similarly.
* a29k/a29k.h: Similarly.
* arc/arc-protos.h: Similarly.
* arc/arc.c: Similarly.
* arc/arc.h: Similarly.
* arm/arm-protos.h: Similarly.
* arm/arm.c: Similarly.
* arm/arm.h: Similarly.
* avr/avr-protos.h: Similarly.
* avr/avr.c: Similarly.
* avr/avr.h: Similarly.
* clipper/clipper-protos.h: Similarly.
* clipper/clipper.c: Similarly.
* clipper/clipper.h: Similarly.
* convex/convex.c: Similarly.
* convex/convex.h: Similarly.
* d30v/d30v-protos.h: Similarly.
* d30v/d30v.c: Similarly.
* d30v/d30v.h: Similarly.
* d30v/d30v.md: Similarly.
* dsp16xx/dsp16xx-protos.h: Similarly.
* dsp16xx/dsp16xx.c: Similarly.
* dsp16xx/dsp16xx.h: Similarly.
* elxsi/elxsi.c: Similarly.
* elxsi/elxsi.h: Similarly.
* fr30/fr30.c: Similarly.
* fr30/fr30.md: Similarly.
* h8300/h8300-protos.h: Similarly.
* h8300/h8300.c: Similarly.
* h8300/h8300.h: Similarly.
* i370/i370-protos.h: Similarly.
* i370/i370.c: Similarly.
* i370/i370.h: Similarly.
* i386/i386.c: Similarly.
* i386/osf1elf.h: Similarly.
* i386/osfrose.h: Similarly.
* i860/i860-protos.h: Similarly.
* i860/i860.c: Similarly.
* i860/i860.h: Similarly.
* i960/i960-protos.h: Similarly.
* i960/i960.c: Similarly.
* i960/i960.h: Similarly.
* ia64/ia64-protos.h: Similarly.
* ia64/ia64.c: Similarly.
* ia64/ia64.h: Similarly.
* m32r/m32r-protos.h: Similarly.
* m32r/m32r.c: Similarly.
* m32r/m32r.h: Similarly.
* m68hc11/m68hc11-protos.h: Similarly.
* m68hc11/m68hc11.c: Similarly.
* m68hc11/m68hc11.h: Similarly.
* m68k/crds.h: Similarly.
* m68k/dpx2.h: Similarly.
* m68k/m68k-protos.h: Similarly.
* m68k/m68k.c: Similarly.
* m68k/m68k.h: Similarly.
* m68k/news.h: Similarly.
* m88k/m88k-protos.h: Similarly.
* m88k/m88k.c: Similarly.
* m88k/m88k.h: Similarly.
* mips/mips-protos.h: Similarly.
* mips/mips.c: Similarly.
* mips/mips.h: Similarly.
* ns32k/merlin.h: Similarly.
* ns32k/ns32k.c: Similarly.
* ns32k/ns32k.h: Similarly.
* ns32k/tek6000.h: Similarly.
* pa/pa-protos.h: Similarly.
* pa/pa.c: Similarly.
* pa/pa.h: Similarly.
* pdp11/2bsd.h: Similarly.
* pdp11/pdp11-protos.h: Similarly.
* pdp11/pdp11.c: Similarly.
* pdp11/pdp11.h: Similarly.
* romp/romp-protos.h: Similarly.
* romp/romp.c: Similarly.
* romp/romp.h: Similarly.
* rs6000/rs6000-protos.h: Similarly.
* rs6000/rs6000.c: Similarly.
* rs6000/rs6000.h: Similarly.
* rs6000/sysv4.h: Similarly.
* sh/sh-protos.h: Similarly.
* sh/sh.c: Similarly.
* sh/sh.h: Similarly.
* sparc/sparc-protos.h: Similarly.
* sparc/sparc.c: Similarly.
* sparc/sparc.h: Similarly.
* vax/vax.c: Similarly.
* vax/vax.h: Similarly.
* vax/vms.h: Similarly.
* we32k/we32k.c: Similarly.
* we32k/we32k.h: Similarly.
From-SVN: r43818
Makefile.in (final.o): Depend on target.h.
* Makefile.in (final.o): Depend on target.h.
* final.c: Include target.h.
(default_function_pro_epilogue): New.
(final_start_function): Use target structure for function prologues.
(final_end_function): Use target structure for function epilogues.
* fold-const.c (real_hex_to_f): Constify s and p.
* output.h (default_function_pro_epilogue): New.
* real.h (real_hex_to_f): Update prototype.
* target-def.h (TARGET_ASM_FUNCTION_PROLOGUE,
TARGET_ASM_FUNCTION_EPILOGUE, TARGET_ASM_OUT): New.
(TARGET_INITIALIZER): Update.
* target.h (gcc_target): Add struct asm_out.
* doc/tm.texi: Update.
config:
Update each arch to use TARGET_ASM_FUNCTION_PROLOGUE and
TARGET_ASM_FUNCTION_EPILOGUE. Move macro code to functions
in cpu/cpu.c, or rename old functions consistently. Take
a HOST_WIDE INT not an int as the SIZE parameter. Remove now
redundant macros and prototypes. Make new functions static.
* 1750a/1750a.c: Similarly.
* 1750a/1750a.h: Similarly.
* a29k/a29k-protos.h: Similarly.
* a29k/a29k.c: Similarly.
* a29k/a29k.h: Similarly.
* arc/arc-protos.h: Similarly.
* arc/arc.c: Similarly.
* arc/arc.h: Similarly.
* arm/arm-protos.h: Similarly.
* arm/arm.c: Similarly.
* arm/arm.h: Similarly.
* avr/avr-protos.h: Similarly.
* avr/avr.c: Similarly.
* avr/avr.h: Similarly.
* clipper/clipper-protos.h: Similarly.
* clipper/clipper.c: Similarly.
* clipper/clipper.h: Similarly.
* convex/convex.c: Similarly.
* convex/convex.h: Similarly.
* d30v/d30v-protos.h: Similarly.
* d30v/d30v.c: Similarly.
* d30v/d30v.h: Similarly.
* d30v/d30v.md: Similarly.
* dsp16xx/dsp16xx-protos.h: Similarly.
* dsp16xx/dsp16xx.c: Similarly.
* dsp16xx/dsp16xx.h: Similarly.
* elxsi/elxsi.c: Similarly.
* elxsi/elxsi.h: Similarly.
* fr30/fr30.c: Similarly.
* fr30/fr30.md: Similarly.
* h8300/h8300-protos.h: Similarly.
* h8300/h8300.c: Similarly.
* h8300/h8300.h: Similarly.
* i370/i370-protos.h: Similarly.
* i370/i370.c: Similarly.
* i370/i370.h: Similarly.
* i386/i386.c: Similarly.
* i386/osf1elf.h: Similarly.
* i386/osfrose.h: Similarly.
* i860/i860-protos.h: Similarly.
* i860/i860.c: Similarly.
* i860/i860.h: Similarly.
* i960/i960-protos.h: Similarly.
* i960/i960.c: Similarly.
* i960/i960.h: Similarly.
* ia64/ia64-protos.h: Similarly.
* ia64/ia64.c: Similarly.
* ia64/ia64.h: Similarly.
* m32r/m32r-protos.h: Similarly.
* m32r/m32r.c: Similarly.
* m32r/m32r.h: Similarly.
* m68hc11/m68hc11-protos.h: Similarly.
* m68hc11/m68hc11.c: Similarly.
* m68hc11/m68hc11.h: Similarly.
* m68k/crds.h: Similarly.
* m68k/dpx2.h: Similarly.
* m68k/m68k-protos.h: Similarly.
* m68k/m68k.c: Similarly.
* m68k/m68k.h: Similarly.
* m68k/news.h: Similarly.
* m88k/m88k-protos.h: Similarly.
* m88k/m88k.c: Similarly.
* m88k/m88k.h: Similarly.
* mips/mips-protos.h: Similarly.
* mips/mips.c: Similarly.
* mips/mips.h: Similarly.
* ns32k/merlin.h: Similarly.
* ns32k/ns32k.c: Similarly.
* ns32k/ns32k.h: Similarly.
* ns32k/tek6000.h: Similarly.
* pa/pa-protos.h: Similarly.
* pa/pa.c: Similarly.
* pa/pa.h: Similarly.
* pdp11/2bsd.h: Similarly.
* pdp11/pdp11-protos.h: Similarly.
* pdp11/pdp11.c: Similarly.
* pdp11/pdp11.h: Similarly.
* romp/romp-protos.h: Similarly.
* romp/romp.c: Similarly.
* romp/romp.h: Similarly.
* rs6000/rs6000-protos.h: Similarly.
* rs6000/rs6000.c: Similarly.
* rs6000/rs6000.h: Similarly.
* rs6000/sysv4.h: Similarly.
* sh/sh-protos.h: Similarly.
* sh/sh.c: Similarly.
* sh/sh.h: Similarly.
* sparc/sparc-protos.h: Similarly.
* sparc/sparc.c: Similarly.
* sparc/sparc.h: Similarly.
* vax/vax.c: Similarly.
* vax/vax.h: Similarly.
* vax/vms.h: Similarly.
* we32k/we32k.c: Similarly.
* we32k/we32k.h: Similarly.
From-SVN: r43817
basic-block.h (first_insn_after_basic_block_note): Declare.
* basic-block.h (first_insn_after_basic_block_note): Declare.
* flow.c (first_insn_after_basic_block_note): Define. Moved
from...
* ssa.c (first_insn_after_basic_block_note): Remove.
* ssa-dce.c (find_inherently_necessary): Consider BARRIERs
necessary.
(ssa_eliminate_dead_code): Properly update the CFG and PHI
nodes when we find a dead conditional branch. Insert BARRIERs
after any blocks with no successors, but which do not have
any BARRIERs.
From-SVN: r43816
* varray.c (varray_check_failed): Use internal_error.
From-SVN: r43815
configure.in: Remove NATIVE, NULL_TARGET.
2001-07-06 Daniel Jacobowitz <drow@mvista.com>
* configure.in: Remove NATIVE, NULL_TARGET.
Set CANADIAN only for Canadian crosses. Set xcompiling
for both Canadian crosses and host-x-host crosses.
* configure: Regenerated.
From-SVN: r43814
Update Craig's status.
From-SVN: r43811
stl_vector.h (vector::_M_initialize_aux): Fix typo.
2001-07-06 Peter Schmid <schmid@snake.iap.physik.tu-darmstadt.de>
* include/bits/stl_vector.h (vector::_M_initialize_aux): Fix typo.
From-SVN: r43808
cp-tree.def (TEMPLATE_DECL): Update comment.
2001-07-06 Ira Ruben <ira@apple.com>
* cp-tree.def (TEMPLATE_DECL): Update comment. DECL_RESULT should
be DECL_TEMPLATE_RESULT.
From-SVN: r43807
configure.in: Check for fseeko, ftello.
2001-07-06 Toon Moene <toon@moene.indiv.nluug.nl>
Pedro Vazquez <vazquez@penelope.iqm.unicamp.br>
* configure.in: Check for fseeko, ftello.
* configure: Rebuilt.
* config.h.in: Rebuilt.
* fio.h: Define FSEEK to be fseek or fseeko, depending
on configure's findings. Ditto for FTELL and ftell / ftello.
* backspace.c (f_back): Use FSEEK for fseek, FTELL for ftell.
* dfe.c (c_dfe): Ditto.
* due.c (c_due, e_rdue): Ditto.
* endfile.c (t_runc): Ditto.
* err.c (f__nowreading, f__nowwriting): Ditto.
* ftell_.c (G77_ftell_0, G77_fseek_0): Ditto.
* inquire.c (f_inqu): Ditto.
* open.c (f_open): Ditto.
* rdfmt.c (rd_ed): Ditto.
* sue.c (s_wsue, e_wsue, e_rsue): Ditto.
Co-Authored-By: Pedro Vazquez <vazquez@penelope.iqm.unicamp.br>
From-SVN: r43806
dwarf2out.c (mem_loc_descriptor): Only look through a constant pool reference if...
* dwarf2out.c (mem_loc_descriptor): Only look through a constant pool
reference if the target constant is also a SYMBOL_REF.
From-SVN: r43805
Fix bad checkin in docs.
From-SVN: r43804
Daily bump.
From-SVN: r43802
cp-tree.h (copy_template_template_parm): Rename to ...
* cp-tree.h (copy_template_template_parm): Rename to ...
(bind_template_template_parm): ... here.
* tree.c (copy_template_template_parm): Rename to ...
(bind_template_template_parm): ... here. Remove the case when
NEWARGS is NULL_TREE.
(copy_tree_r): Don't copy TEMPLATE_TEMPLATE_PARM and
BOUND_TEMPLATE_TEMPLATE_PARM.
* pt.c (lookup_template_class): Adjust.
From-SVN: r43800
lang.c (flag_assume_compiled): Removed.
* lang.c (flag_assume_compiled): Removed.
* java-tree.h (flag_assume_compiled): Removed.
* lang-options.h: Removed -ffile-list-file, -fuse-boehm-gc,
-fhash-synchronization, -fuse-divide-subroutine,
-fcheck-references, -femit-class-file, -femit-class-files,
-fassume-compiled. Updated --encoding information. Changed
-foutput-class-dir to `-d'.
From-SVN: r43799
cvt.c (convert_lvalue): New fn.
* cvt.c (convert_lvalue): New fn.
* cp-tree.h: Declare it.
* method.c (do_build_assign_ref): Use it.
(do_build_copy_constructor): Convert parm to base types
before calling base constructors.
From-SVN: r43798
typeck.c (check_return_expr): Check DECL_ALIGN instead of DECL_USER_ALIGN.
* typeck.c (check_return_expr): Check DECL_ALIGN instead of
DECL_USER_ALIGN. Check flag_elide_constructors instead of
optimize.
* semantics.c (cp_expand_stmt): Don't destroy the named return value.
From-SVN: r43797
Remove bogus patch.
* config/ia64/lib1funcs.asm: Revert 2001-07-02 change.
* config/ia64/t-ia64: Likewise.
(LIB1ASMFUNCS): Update comment.
From-SVN: r43796
m68hc11.md ("*ashlsi3"): Operand 1 can be a memory reference using the stack pointer...
* config/m68hc11/m68hc11.md ("*ashlsi3"): Operand 1 can be a memory
reference using the stack pointer, adjust it since we push Y
temporarily.
("*ashrsi3"): Likewise.
("*lshrsi3"): Likewise.
From-SVN: r43791
m68hc11.h (RETURN_ADDR_RTX): Fix return address when -fomit-frame-pointer is used.
* config/m68hc11/m68hc11.h (RETURN_ADDR_RTX): Fix return address
when -fomit-frame-pointer is used.
From-SVN: r43789
gcc.c (TARGET_OPTION_TRANSLATE_TABLE): New.
* gcc.c (TARGET_OPTION_TRANSLATE_TABLE): New.
(translate_options): If the above is defined, use it to map
given options to new options.
* doc/tm.texi: Document it.
From-SVN: r43787
invoke.texi (Optimize Options): Document that -fgcse may cause programs using computed gotos to run more slowly.
* doc/invoke.texi (Optimize Options): Document that -fgcse may
cause programs using computed gotos to run more slowly.
Co-Authored-By: Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at>
From-SVN: r43786
Makefile.in: Add ffs.c dependency.
* Makefile.in: Add ffs.c dependency.
* configure.in: Add ffs.c.
* ffs.c: New file.
From-SVN: r43784
* testsuite_flags.in (--build-includes): backward, not backwards.
From-SVN: r43783
cvt.c (convert_lvalue): New fn.
* cvt.c (convert_lvalue): New fn.
* cp-tree.h: Declare it.
* method.c (do_build_assign_ref): Use it.
(do_build_copy_constructor): Convert parm to base types
before calling base constructors.
* typeck.c (check_return_expr): Check DECL_ALIGN instead of
DECL_USER_ALIGN. Check flag_elide_constructors instead of
optimize.
* semantics.c (cp_expand_stmt): Don't destroy the named return value.
From-SVN: r43780
install.texi (Specific): Markup, spelling and typo fixes.
* doc/install.texi (Specific): Markup, spelling and typo fixes.
Fixed sorting.
Consistently require binutils 2.11.2, not prereleases.
(Specific, decstation-*): Canonicalize as mips-dec-*.
(Specific, i?86-*-sco3.2v5*): Remove make bootstrap requirement,
always necessary.
(Specific, m68k-altos): Removed reference to README.altos, deleted.
(Specific, mips-*): Reword MIPS C compiler requirements.
(Specific, powerpc*-*-*): New, mention --with-cpu once.
(Specific, sunv5): Removed, obsolete.
From-SVN: r43779
dwarf2out.c (output_loc_list): Use an all ones mask for .text asm output and don't rely on long long literals.
* dwarf2out.c (output_loc_list): Use an all ones mask for
.text asm output and don't rely on long long
literals. Reformat some long lines.
From-SVN: r43777
Daily bump.
From-SVN: r43775
gcc.texi (GNU/Linux): Remove accidental re-add of GPL section.
* doc/gcc.texi (GNU/Linux): Remove accidental re-add of GPL
section.
From-SVN: r43774
dwarf2out.c (dwarf2out_define): Update comment.
2001-07-04 Daniel Berlin <dan@cgsoftware.com>
* dwarf2out.c (dwarf2out_define): Update comment.
(dwarf2out_undef): Ditto.
(dwarf2out_start_source_file): Ditto.
(dwarf2out_end_source_file): Ditto.
(dwarf2out_finish): Output DW_MACINFO_end_file for primary file,
since we never call the start/end debug hook for the primary file.
From-SVN: r43773
h8300.c (get_shift_alg): Remove an extra operand from shll.
2001-07-04 Kazu Hirata <kazu@hxi.com>
* config/h8300/h8300.c (get_shift_alg): Remove an extra operand
from shll.
From-SVN: r43771
cppinit.c (remove_dup_dirs): Inform if a system include directory is being reordered.
* cppinit.c (remove_dup_dirs): Inform if a system include
directory is being reordered.
* doc/invoke.texi (Directory Options): GCC warns if you hide a
system include.
* doc/cpp.texi (Search Paths): Likewise.
* doc/gcc.texi (Interoperation): Remove information about
-I/usr/include.
From-SVN: r43769
varray.h (VARRAY_TOP_GENERIC_PTR): Remove spurious parameter.
* varray.h (VARRAY_TOP_GENERIC_PTR): Remove spurious parameter.
(VARRAY_TOP_CHAR_PTR): Likewise.
correct filenames for 2001-07-03 Stan Shebs <shebs@apple.com>
From-SVN: r43768
* gcc.c (process_command): Don't assign elements of a const char*.
From-SVN: r43767
emit-rtl.c (change_address): Don't abort if invalid address while reload is in progress.
* emit-rtl.c (change_address): Don't abort if invalid address while
reload is in progress.
From-SVN: r43765
c-lex.c (cb_file_change): Pass line number to debug_start_source_file.
2001-07-04 Daniel Berlin <dan@cgsoftware.com>
* c-lex.c (cb_file_change): Pass line number to
debug_start_source_file.
(cb_undefine): Pass correct line number to debug_undef.
* toplev.c (debug_start_source_file): Add line number to
parameters. Pass it along to dwarf2out_start_source_file.
(decode_g_option): Stop resetting debug level back to normal when
we change debug formats, unless the current level is
none. (Before, -g3 -gdwarf-2 would use debug level 2, rather than
3).
* toplev.h (debug_start_source_file): Add line number to
parameters.
* dwarf2out.h (dwarf2out_start_source_file): Add line number to parameters.
* dwarf2out.c (dwarf2out_start_source_file): Add line number to
parameters.
Output debug_macinfo data for starting file if requested.
(dwarf2out_end_source_file): Output debug_macinfo data for ending
file if requested.
(dwarf2out_define): Output debug_macinfo data for defining a macro if requested.
(dwarf2out_undef): Output debug_macinfo data for undefining a
macro if requested.
(DEBUG_MACINFO_SECTION): New. DWARF2 macro info section name.
(DEBUG_MACINFO_SECTION_LABEL): New. DWARF2 macro info section label.
(macinfo_section_label): New. DWARF2 macro info section label.
(dwarf2out_init): If we want macro info, output the start label
for the section.
(dwarf2out_finish): If we want macro info, add a DW_AT_macro_info
attribute to the compilation unit die pointing to the macro info.
2001-07-04 Daniel Berlin <dan@cgsoftware.com>
* dwarf2out.c (new_loc_list): Move to inside #ifdef
DWARF2_DEBUGGING_INFO.
(add_loc_descr_to_loc_list): Ditto.
(output_loc_list): Ditto.
Also, fix thinko in curr not being initialized.
(gen_internal_sym): Ditto.
From-SVN: r43763
emit-rtl.c (replace_equiv_address): New function.
* emit-rtl.c (replace_equiv_address): New function.
* expr.h (replace_equiv_address): New declaration.
* explow.c (validize_mem): Call it instead of change_address and
also call if -fforce-addr and address is constant.
* expr.c: Replace more calls to change_address with adjust_address
and/or replace_equiv_address or to validize_mem.
* function.c, regmove.c, config/alpha/alpha.c: Likewise.
* config/arm/arm.md, config/clipper/clipper.md: Likewise.
* config/dsp16xx/dsp16xx.md, config/fr30/fr30.c: Likewise.
* config/i370/i370.md, config/i860/i860.md: Likewise.
* config/i960/i960.md, config/mips/mips.c: Likewise.
* config/mips/mips.md, config/pa/pa.md: Likewise.
* config/pdp11/pdp11.md, config/rs6000/rs6000.c: Likewise.
* config/rs6000/rs6000.md, config/sh/sh.md: Likewise.
From-SVN: r43762
* Makefile.in: Take PICFLAG and RUNTESTFLAGS out of FLAGS_TO_PASS.
From-SVN: r43761
bitmap.c (bitmap_union_of_diff): Don't use BITMAP_ALLOCA.
* bitmap.c (bitmap_union_of_diff): Don't use BITMAP_ALLOCA.
* bitmap.h (BITMAP_ALLOCA): Don't pass alloca as an argument to a
function.
From-SVN: r43760
include: New directory.
* doc/include: New directory.
* doc/fdl.texi: Move to doc/include/fdl.texi.
* doc/texinfo.tex: Move to doc/include/texinfo.tex.
* doc/include/funding.texi, doc/include/gpl.texi: New files.
* doc/gcc.texi: Use funding.texi and gpl.texi.
* Makefile.in ($(docdir)/cpp.info, $(docdir)/gcc.info,
$(docdir)/cppinternals.info, cpp.dvi. gcc.dvi. cppinternals.dvi):
Update dependencies and use -I $(docdir)/include.
f:
* g77.texi: Use gpl.texi and funding.texi. Remove Look and Feel
section. Add Funding Free Software to invariant sections.
* Make-lang.in ($(srcdir)/f/g77.info, f/g77.dvi): Update
dependencies and use doc/include in search path.
java:
* gcj.texi: Use gpl.texi.
* Make-lang.in ($(srcdir)/java/gcj.info, java/gcj.dvi): Update
dependencies and use doc/include in search path.
From-SVN: r43757
Fix dependencies for parallel builds.
From-SVN: r43756
projects / gcc.git / log