git.libre-soc.org Git - buildroot.git/log

openssl: security bump to version 1.0.2h

Fixes:
CVE-2016-2105 - Fix EVP_EncodeUpdate overflow
CVE-2016-2106 - Fix EVP_EncryptUpdate overflow
CVE-2016-2107 - Prevent padding oracle in AES-NI CBC MAC check
CVE-2016-2109 - Prevent ASN.1 BIO excessive memory allocation
CVE-2016-2176 - EBCDIC overread

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

wpa_supplicant: add security fixes

Add upstream patching fixing CVE-2016-2447: psk configuration parameter update
allowing arbitrary data to be written.

See http://w1.fi/security/2016-1/psk-parameter-config-update.txt for details.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

hostapd: add security fix

Add upstream patch fixing CVE-2016-2447: psk configuration parameter update
allowing arbitrary data to be written.

See http://w1.fi/security/2016-1/psk-parameter-config-update.txt for details.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

x264: needs madvise(), disable for bfin external toolchain

x264 uses madvise() which is not available in the bfin external toolchain.

Fixes:
http://autobuild.buildroot.net/results/837/837fd5a63d59b5c65818ec005a565cb7741a1cdd/

[Peter: Issue is specific to bfin toolchain, so only disable for that one]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

harfbuzz: bump to version 1.2.7

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ntp: security bump to version 4.2.8p7

Fixes:

CVE-2016-1551 - Refclock impersonation vulnerability, AKA:
refclock-peering

CVE-2016-1549 - Sybil vulnerability: ephemeral association attack, AKA:
ntp-sybil - MITIGATION ONLY

CVE-2016-2516 - Duplicate IPs on unconfig directives will cause an
assertion botch

CVE-2016-2517 - Remote configuration trustedkey/requestkey values are not
properly validated

CVE-2016-2518 - Crafted addpeer with hmode > 7 causes array wraparound
with MATCH_ASSOC

CVE-2016-2519 - ctl_getitem() return value not always checked

CVE-2016-1547 - Validate crypto-NAKs, AKA: nak-dos

CVE-2016-1548 - Interleave-pivot - MITIGATION ONLY

CVE-2015-7704 - KoD fix: peer associations were broken by the fix for
NtpBug2901, AKA: Symmetric active/passive mode is broken

CVE-2015-8138 - Zero Origin Timestamp Bypass, AKA: Additional KoD Checks

CVE-2016-1550 - Improve NTP security against buffer comparison timing
attacks, authdecrypt-timing, AKA: authdecrypt-timing

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

samba4: bump to version 4.4.3

Fixes a few regressions from the previous security bump.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

opencv: fix compile issues

The first patch from Debian fixes following autobuild failure:
http://autobuild.buildroot.net/results/eda5c6c43da40a342e0f545a348d2f865eb5ccf2/

Tested with ARM build without a regression.

The second patch fixes musl arm autobuild failure:
http://autobuild.buildroot.net/results/6a397de789c809984b851a304078e26b2ac58974/

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: bump 3.2.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

luajit: fix host installation

Packages installed for the host should have their prefix set to
$(HOST_DIR)/usr, and therefore not use DESTDIR at installation time.

Using PREFIX=/usr DESTDIR=$(HOST_DIR) is wrong, and leads for example to
luajit.pc containing prefix=/usr, which means pkg-config returns
incorrect results for host-luajit.

This patch fixes the luajit package to conform to this rule.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: rewrite commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

php-zmq: bump version to 1.1.3

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

php-imagick: bump version to 3.4.1

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

php-geoip: bump version to HEAD of master on GitHub

Related: https://bugs.php.net/bug.php?id=71083

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mtd: install header files to staging directory

These header files are required by swupdate.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

crda: fix build with GCC 6

Building crda with GCC 6 fails because of all compiler warnings are treated as
errors. Disable the compiler option '-Werror':

keys-gcrypt.c:94:32: error: ‘keys’ defined but not used [-Werror=unused-const-variable=]
static const struct key_params keys[] = {
^~~~
cc1: all warnings being treated as errors

Add a patch to drop '-Werror' from CFLAGS.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

fdk-aac: fix build with GCC 6

GCC 6 defaults to -std=gnu++14 instead of -std=gnu++98. The C++11 standard does
not allow "narrowing conversions" which is why building fdk-aac with GCC 6
fails:

libAACenc/src/aacEnc_rom.cpp:661:1: error: narrowing conversion of '2180108801u' from 'unsigned int' to 'FIXP_DBL {aka long int}' inside { } [-Wnarrowing]

Use '-std=gnu++98' as suggested by "Porting to GCC 6" [1].

[1] https://gcc.gnu.org/gcc-6/porting_to.html

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

imlib2: security bump to version 1.4.9

It already includes the fixes for CVE-2016-3994 and CVE-2011-5326 so
drop the patches, and additionally fixes:
CVE-2016-4024 - integer overflow in imlib2, which result in insufficient
heap allocation.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

syslinux: fix boot hang when host-gcc is 5.3

Syslinux uses the host version of gcc to build to bootloader. On systems
with gcc 5.3, this results in a bootloader that hangs. This issue has
been addressed in upstream syslinux, but an official release has not
been made yet. This commit adds the upstream patch to fix the issue.

Most likely fixes bug #8866.

Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/mpd: bump to version 0.19.15

Drop patches applied upstream:
- 0001: notify: Don't use constexpr on Haiku
- 0002: notify: use "constexpr" only with glibc

Renumber remaining patches.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: remove Sourcery PowerPC toolchains

These are running long on the teeth - the bundled (e)glibc versions
are very old with several security bugs, they don't work reliably with
-Os and have several build failures related to internal compiler
errors such as:

http://autobuild.buildroot.net/results/fe7/fe7bdba5faf199275aedea2918705b5d19d228bf/
http://autobuild.buildroot.net/results/935/935ac42c30ed893939c06c077534f060aed80e9a/
http://autobuild.buildroot.net/results/a47/a476af82c8fe4a279117314b278b08af9a08fe54/
http://autobuild.buildroot.net/results/cae/cae720b5096be2672b4dc1311ae3fc4ed06a3b53/

The situation will not provide, and will in fact get worse with older kernel
headers precluding modern package versions and the old gcc version doing as
well so remove them.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- remove no longer needed comment in liquid-dsp Config.in file, as
noticed by Romain Naour.
- add Config.in.legacy options, as noticed by Romain Naour.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: bump CodeSourcery MIPS to 2016.06-8

Add hash for the toolchain sources.

Runtime tested with Qemu with qemu_mips_malta_defconfig

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: bump CodeSourcery AMD64 to 2015.11-139

>From getting-started.pdf:
- Linker bug fix.
- Fix CVE 2015-7547 getaddrinfo.
- Breakpoint in non-existent file bug fix.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: bump CodeSourcery NiosII to 2015.11-130

>From getting-started.pdf:
- DWARF signed LEB128 encoding fix
- Fix CVE 2015-7547 getaddrinfo
- Breakpoint in non-existent file bug fix

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

rtl8821au: bump to 4c298b

Includes numerous stablity and cleanup passes by ulli-kroll.

A hash file is also added, as it was missing before.

Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: add GCC 6.x option

Commit 519d83bfa0442439026db4e71e605a5c1347e566 adds support for GCC
6. Add an GCC 6.x option for external toolchains, too.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

barebox: support auxiliary config build

Adds support to build barebox with an auxiliary config.

This is useful for building an SPL (Secondary Program Loader) in
addition to the traditional TPL (Tertiary Program Loader). The
Beaglebone Black for example has two barebox configurations:

- am335x_defconfig builds the full barebox bootloader with device
  tree

- am335x_mlo_defconfig builds the smaller MLO bootloader that loads
  the full barebox bootloader from the eMMC or SD card.

Tested with the following defconfig:

  # architecture
  BR2_arm=y
  BR2_cortex_a8=y
  BR2_ARM_EABIHF=y

  # system
  BR2_TARGET_GENERIC_HOSTNAME="beaglebone"
  BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y
  BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW=y

  # filesystem
  BR2_PACKAGE_AM33X_CM3=y
  BR2_TARGET_ROOTFS_EXT2=y
  BR2_TARGET_ROOTFS_EXT2_4=y

  # bootloader
  BR2_TARGET_BAREBOX=y
  BR2_TARGET_BAREBOX_BOARD_DEFCONFIG="am335x"
  BR2_TARGET_BAREBOX_IMAGE_FILE="images/barebox-am33xx-beaglebone.img"
  BR2_TARGET_BAREBOX_CUSTOM_ENV=y
  BR2_TARGET_BAREBOX_CUSTOM_ENV_PATH="board/beaglebone/barebox/barebox.env"
  BR2_TARGET_BAREBOX_AUX=y
  BR2_TARGET_BAREBOX_AUX_BOARD_DEFCONFIG="am335x_mlo"
  BR2_TARGET_BAREBOX_AUX_IMAGE_FILE="images/barebox-am33xx-beaglebone-mlo.img"

  # kernel
  BR2_LINUX_KERNEL=y
  BR2_LINUX_KERNEL_USE_DEFCONFIG=y
  BR2_LINUX_KERNEL_DEFCONFIG="omap2plus"
  BR2_LINUX_KERNEL_ZIMAGE=y

  # use the barebox built-in dtb
  # BR2_LINUX_KERNEL_DTS_SUPPORT is not set

Signed-off-by: Pieter Smith <pieter@boesman.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

barebox: prepare for auxiliarry build

No functional changes. In preparation for the auxiliary barebox build,
boot/barebox is split into two parts:
1. boot/barebox:
   - The source and patch specification which are to be shared between the
     barebox and barebox-aux packages.
   - The barebox-package function and build logic.
2. boot/barebox/barebox:
   - The package configuration, fragments, barebox env, etc.
   - The actual barebox package make instantiation.

Signed-off-by: Pieter Smith <pieter@boesman.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: bump version of Linaro AArch64 toolchain

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: bump version of Linaro ARMeb toolchain

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: bump version of Linaro ARM toolchain

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

webkitgtk24: mark as deprecated

It's affected by 40+ security bugs, and upstream will only care to fix
the latest stable branch, which is 2.12.x
Some effort was made with the 2.4.10 release to address some security
bugs but it's incomplete.

See:
https://blogs.gnome.org/mcatanzaro/2016/02/01/on-webkit-security-updates/
https://blogs.gnome.org/mcatanzaro/2016/02/19/webkitgtk-gets-security-updates/

Also:
http://webkitgtk.org/security/WSA-2016-0002.html
http://webkitgtk.org/security/WSA-2016-0001.html
http://webkitgtk.org/security/WSA-2015-0002.html

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

midori: bump to version 0.5.11

Also drop BR2_PACKAGE_MIDORI_HTTPS option since it's now handled in the
webkitgtk package to satisfy MiniBrowser.

This version can't work with the older webkitgtk24 engine so it switches
to the new version.

Also make gcr support conditional on x11 support for libgtk3, it doesn't
work otherwise.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

webkitgtk: new package

Add the latest 2.12.x upstream stable branch.

Both 2.4.x and 2.12.x can live side-by-side, however only the latest
stable branch/releases are security-maintained, so add it unslotted.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

android-tools: add new package

This package allows to build the fastboot and adb host utilities,
which can be used to interact with target devices implementing one of
these protocols.

The work behind the host utilities was funded by ECA Group
<http://www.ecagroup.com>. ECA Group is the copyright owner of the
contributed code.

The package also allows to build fastboot, adb and adbd daemon for the
target.

Regarding adbd, the target is required to have the FunctionFS USB Gadget
configuration. Then the following commands enable the use of adb:
# modprobe g_ffs idVendor=0x18d1 idProduct=0x4e42 \
iSerialNumber="buildroot"
# mkdir -p /dev/usb-ffs/adb
# mount -t functionfs adb /dev/usb-ffs/adb -o uid=2000,gid=2000
# adbd &

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Julien Corjon <corjon.j@ecagroup.com>
[Thomas:
- update on top of master.
- fix Config.in.host prompt, it should have been "host android-tools"
and not just "android-tools".]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

board: add qemu coldfire support

Add kernel config and defconfig for Qemu Coldfire.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain: add coldfire support

Add support for m68k/coldfire. A gcc patch is required
to avoid gcc ICE.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: bump CodeSourcery aarch64 to 2014.11

Runtime tested using qemu_aarch64_virt_defconfig.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[Thomas: updated to the latest master branch.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: fix installation for CodeSourcery AArch64 toolchain

The extracted toolchain sources contains a single symlink in the
aarch64-linux-gnu/libc/lib directory wich is lost during Buildroot's
staging install.

aarch64-linux-gnu/libc/lib/ld-linux-aarch64.so.1 -> ../lib64/ld-2.18.so

Add a custom post install staging and target hooks to create it
manually.

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: also make the same tweak in the target.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

move busybox-minimal.config to be used by other noMMU targets

Config can be used by other noMMU targets as qemu-system-m68k
with coldfire emulation.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qemu/x86*: update instructions to use virtio

Switch the invocation command to use virtio-blk and virtio-net for
better performance.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qemu/x86*: enable virtio for kernel config

It has better performance for block and net.
Enable virgl (DRM_VIRTIO_GPU) support for 3D acceleration.
And also DRM_BOCHS for better stdvga acceleration.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qemu/x86: use symlinked kernel config

It's exactly the same as the x86_64 variant so just create a symlink.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

opkg: add missing dependency on libarchive

opkg requires libarchive. This was expressed in the Config.in file with a
select, but not in the .mk file.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libtommath: build with -fPIC

This fixes the build on x86_64, see:

http://autobuild.buildroot.net/results/212/212469db5dc8399070390603c0fdf7f12b130cda/

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl: bump to version 5.22.2

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: bump 4.1.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

shairport-sync: bump to version 2.8.3

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

php: security bump to version 5.6.21

Fixes (CVEs not assigned yet):
bug #72094 - Out of bounds heap read access in exif header processing
bug #71912 - libgd: signedness vulnerability
bug #72061 - Out-of-bounds reads in zif_grapheme_stripos with negative offset
bug #71843 - null ptr deref ZEND_RETURN_SPEC_CONST_HANDLER
bug #71952 - Corruption inside imageaffinematrixget

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

purge-locales: Handle empty locale directories better

If a locale directory is empty, shell code like "for langdir in
$$dir/*;" will loop once with langdir set to "path/to/dir/*", rather
than not looping at all, which would obviously be the desired
behavior.

Then "grep -qx $${langdir##*/}" ungoes two shell expansions (how?)
that transform the expression from "${langdir##*/}" to "*" to "list of
all files in buildroot root dir". Which is most certainly not what
this command was supposed to do.

If one of those files happens to be an 8GB flash image, grep consumes
all available memory and crashes trying to search it.

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/sheevaplug_defconfig: use 4.5.2 kernel, configure eth0

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

moarvm: use libtommath

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

xf86-input-libinput: bump to version 0.18.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

xterm: bump to version 324

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libxkbcommon: bump to version 0.6.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sshfs: bump to version 2.7

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

subversion: security bump to version 1.9.4

Fixes:
CVE-2016-2167 - svnserve/sasl may authenticate users using the wrong
realm.
CVE-2016-2168 - Remotely triggerable DoS vulnerability in mod_authz_svn
during COPY/MOVE authorization check.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/nodejs: bump version to 6.0.0

See https://nodejs.org/en/blog/release/v6.0.0/

The patches from 5.11.0 have been copied to 6.0.0 with the following
changes:

- Removed 0001-Remove-dependency-on-Python-bz2-module.patch,
   0003-Fix-va_list-not-declared.patch and
   0004-Fix-support-for-uClibc-ng.patch as all 3 have been fixed upstream
- Renamed 0002-gyp-force-link-command-to-use-CXX.patch to
   0001-gyp-force-link-command-to-use-CXX.patch

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mpv: va-api requires egl-drm, wayland and/or x11

The VA-API acceleration requires one or more of the egl-drm, wayland
and/or x11 backends.
Since the egl-drm backend means LIBGL (X11) + EGL + DRM we'll handle it
later once the mesa3d libgl hidden knob is applied.
So for now we'll support wayland and x11 until that happens. Fixes:
http://autobuild.buildroot.net/results/4b9/4b98d0c2c0617715e77fb47b3d97037c6b7562ec/

[Peter: pass --disable-vaapi if libva isn't enabled,
invert wayland/X11 test as suggested by Thomas]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libdrm: bump version to 2.4.68

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libtomcrypt: new package

[Peter: fix building without wchar]
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libtommath: new package

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mpv: fix typo in xkbcommon comment

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

chrony: bump version

From the release notes:

Enhancements
------------
* Add support for NTP and command response rate limiting
* Add support for dropping root privileges on Mac OS X, FreeBSD, Solaris
* Add require and trust options for source selection
* Enable logchange by default (1 second threshold)
* Set RTC on Mac OS X with rtcsync directive
* Allow binding to NTP port after dropping root privileges on NetBSD
* Drop CAP_NET_BIND_SERVICE capability on Linux when NTP port is disabled
* Resolve names in separate process when seccomp filter is enabled
* Replace old records in client log when memory limit is reached
* Don't reveal local time and synchronisation state in client packets
* Don't keep client sockets open for longer than necessary
* Ignore poll in KoD RATE packets as ntpd doesn't always set it correctly
* Warn when using keys shorter than 80 bits
* Add keygen command to generate random keys easily
* Add serverstats command to report NTP and command packet statistics

Bug fixes
---------
* Fix clock correction after making step on Mac OS X
* Fix building on Solaris

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/cryptopp: Backport gcc compatibility patch

Import patch from cryptopp upstream which fixes the gcc version checks
for using attribute deprecated with messages. Fixes build with host
gcc versions < 4.5.

Signed-off-by: Julian Scheel <julian@jusst.de>
[Thomas:
- directly use the patch from upstream through <pkg>_PATCH rather
   than storing it in package/cryptopp/, as it helps avoiding
   line-endings problems: upstream has the source code with DOS line
   endings.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mpv: fix wayland deps

The wayland backend requires libxkbcommon, so when wayland is available
select it to avoid build failure and obscure dependencies. Fixes:
http://autobuild.buildroot.net/results/ed2/ed2660361c9720e48dd5959f2711fd7f14031b0d/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

raspberrypi3_defconfig: bump to kernel version 4.4.8

Signed-off-by: Benoît Mauduit <bmauduit@beneth.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

raspberrypi2_defconfig: bump to kernel version 4.4.8

Signed-off-by: Benoît Mauduit <bmauduit@beneth.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

raspberrypi_defconfig: bump to kernel version 4.4.8

Signed-off-by: Benoît Mauduit <bmauduit@beneth.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

rpi-firmware: change overlay file suffix from dtb to dtbo

Commit dc7b1c0 (rpi-firmware: bump version) bumped rpi-firmware to a version
based on kernel 4.4.x, but didn't update the overlay logic to handle the
.dtbo files from dynamic device tree support.

For details, see:
https://www.raspberrypi.org/forums/viewtopic.php?f=107&t=139732

[Peter: extend description]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mpv: new package

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gcc: add support for gcc 6

This commit adds the support for gcc 6. This release allows to remove
a large number of our gcc patches, mainly thanks to the Xtensa and
musl related patches being merged upstream.

Patches kept with no changes:

100-uclibc-conf.patch
301-missing-execinfo_h.patch
810-arm-softfloat-libgcc.patch
830-arm_unbreak_armv4t.patch
840-microblaze-enable-dwarf-eh-support.patch
860-cilk-wchar.patch
890-fix-m68k-compile.patch

Patches dropped because they have been merged upstream, or were
already upstream backports:

120-gcc-config.gcc-fix-typo-for-powerpc-e6500-cpu_is_64b.patch (merged)
850-libstdcxx-uclibc-c99.patch (merged in a different form, see
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58393)
870-xtensa-add-mauto-litpools-option.patch (upstream backport)
871-xtensa-reimplement-register-spilling.patch (upstream backport)
872-xtensa-use-unwind-dw2-fde-dip-instead-of-unwind-dw2-.patch (upstream backport)
873-xtensa-fix-_Unwind_GetCFA.patch (upstream backport)
874-xtensa-add-uclinux-support.patch (upstream backport)
900-libitm-fixes-for-musl-support.patch (upstream backport)
901-fixincludes-update-for-musl-support.patch (upstream backport)
902-unwind-fix-for-musl.patch (upstream backport)
903-libstdc++-libgfortran-gthr-workaround-for-musl.patch (upstream backport)
904-musl-libc-config.patch (upstream backport)
905-add-musl-support-to-gcc.patch (upstream backport)
905-add-musl-support-to-gcc.patch (upstream backport)
906-mips-musl-support.patch (upstream backport)
907-x86-musl-support.patch (upstream backport)
908-arm-musl-support.patch (upstream backport)
909-aarch64-musl-support.patch (upstream backport)

Successfully build-time and run-time tested with
qemu_arm_vexpress_defconfig, using gcc 6.x, both in uClibc and musl
configurations.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

yajl: remove obsolete patch

Commit 302563539dacb284576a443401cdfd061eb2e1e8 fixes link with libm for all
targets linking against libyajl{,_s}. This makes patch "0001-cmake-uClibc-Fix
-missing-libm-for-tests" obsolete so it is safe to remove it.

Instead of renumbering all remaining patches the patch defined in YAJL_PATCH
is fetched and put intto the packages directory. Having all the patches in one
places makes the number and order of the patches applied to the package more
clear.

Align patch "0003-Link-with-shared-libyajl-in-a-shared-build" with commit
302563539dacb284576a443401cdfd061eb2e1e8 and remove linking with libm from
test/api/CMakeLists.txt.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libusbgx: new package

libusbgx is a C library encapsulating the kernel USB gadget-configfs
userspace API functionality.

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
[Thomas: adjust license information, there are included examples that
are installed by default, licensed under GPLv2+.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gzip: bump version to 1.8

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain/helper: update check_unusable_toolchain comment

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: move the sysroot check to helper function

The sysroot toolchain support check is duplicated at two locations in
the external toolchain infra. So move it inside the
check_unusable_toolchain helper that is called when the toolchain
package is configured (TOOLCHAIN_EXTERNAL_CONFIGURE_CMDS).

The check in TOOLCHAIN_EXTERNAL_INSTALL_SYSROOT_LIBS can be safely
removed since it's already done in check_unusable_toolchain helper.

The check in TOOLCHAIN_EXTERNAL_INSTALL_TARGET_LIBS was removed by
2a87b64f8e8a832a351f8552eb032e4b18431949.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: add a check for unsupported toolchains

Some toolchain can't be used by Buildroot due to sysroot location
issue, so the $(ARCH)-linux-gnu-gcc -print-file-name=libc.a command
return only "libc.a"

This lead to an error during the header check version helper,
so these toolchains can't be imported into Buildroot.

cc1: fatal error: $PWD/libc.a/usr/include/linux/version.h: No such file or directory
compilation terminated.
support/scripts/check-kernel-headers.sh: line 38: /tmp/check-headers.4V5PPF: Permission denied

This issue happen with the first linaro 2015.11 [1] release and
CodeSourcery standard edition [2].

Here is the sysroot directory tree for linaro 2015.11:
$ ls libc/arm-linux-gnueabihf
etc lib sbin usr var

Here is the sysroot directory tree for CodeSourcery standard:
$ ls libc/sgxx-glibc
etc lib lib64 sbin usr var

Add a check to error out with an explicit error message

The check don't use toolchain_find_libc_a function directly since
"realpath -f" is used internally and return an absolute path.

[1] https://bugs.linaro.org/show_bug.cgi?id=1995#c7
[2] http://lists.busybox.net/pipermail/buildroot/2014-October/110696.html

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x264: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/dovecot-pigeonhole: bump version to 0.4.14

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/dovecot: bump version to 2.2.24

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ruby: bump to version 2.3.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

i7z: new package

"A better i7 (and now i3, i5) reporting tool for Linux."

i7z can print out the C-states and temperature for i3, i5 and i7 based
Core processors from Intel (including Nehalems, Sandy Bridge and Ivy
Bridge).

https://github.com/ajaiantilal/i7z

Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: bump 3.{4, 12, 18}.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xlib_libXfixes: fix compile error by backporting upstream commit

Fixes an error not yet caught by autobuilders:

In file included from SaveSet.c:27:0:
Xfixesint.h:67:20: error: static declaration of '_XEatDataWords' follows non-static declaration
static inline void _XEatDataWords(Display *dpy, unsigned long n)
^

To reproduce use this defconfig:

BR2_powerpc64le=y
BR2_powerpc_power8=y
BR2_OPTIMIZE_3=y
BR2_GLIBC_VERSION_2_23=y
BR2_BINUTILS_VERSION_2_26_X=y
BR2_GCC_VERSION_5_X=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XLIB_LIBXFIXES=y

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/jsoncpp: Do not treat conversion warning as error

Fixes
http://autobuild.buildroot.net/results/74b/74b1b9f8defc275ff2bc3d877faf2863929737b9/
http://autobuild.buildroot.net/results/71d/71dcaf18e3d42c66af8036a68250eea1be09227b/
http://autobuild.buildroot.net/results/599/5997a9e4a8ca8b6171438495920d0a487518851c/
http://autobuild.buildroot.net/results/4ab/4abde1d7fd631d3b50a6b53824a781a08d022bca/
http://autobuild.buildroot.net/results/968/9680ebd8c804ef15d471519d54f8aa209710414d/
http://autobuild.buildroot.net/results/d5b/d5be4d51458ca10f3f4ff5fd3ad4b3cfd097f3ad/
http://autobuild.buildroot.net/results/b1e/b1e3fc27f3d0cdd6ca8f7aff06f7d5e4108817ec/
http://autobuild.buildroot.net/results/ffb/ffb40572269c63438228000495e1dc78c778788e/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ipmitool: add an option to enable/disable ipmishell

Fixes:

http://autobuild.buildroot.net/results/a62/a62e95619acb3d4d6be4425cf44a4628ac227494/

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ipmitool: explicitly enable lanplus when selected

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

c-icap: avoid host library search path

Add AUTORECONF as a workaround to the effect of '-Wl,-rpath -Wl,/usr/lib' that
c-icap adds to the linker command.

Fixes:
http://autobuild.buildroot.net/results/077/077374329b2782dbb4b4a9ee7af264cdda311ccc/
http://autobuild.buildroot.net/results/057/057a88179150a4f02990d7b9b0d8f2de3c9da1a3/
http://autobuild.buildroot.net/results/da6/da62b80989df6b8f1b5557b4987d7a6999d30bb8/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

c-icap-modules: bump to version 0.4.2

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

c-icap: bump to version 0.4.2

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nodejs: bump version to 5.11.0

See https://nodejs.org/en/blog/release/v5.11.0/

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nodejs: bump version to 0.10.44

See https://nodejs.org/en/blog/release/v0.10.44/

Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

glib-networking: bump to version 2.48.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libsoup: bump to version 2.54.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wf111: bump to 5.2.2-r2

This revision fixes the build with recent kernel versions, which have
seen changes in the MMC framework breaking the build of external SDIO
drivers.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wf111: properly define and use the WF111_VERSION variable

Instead of hardcoding again the version of the package when defining
WF111_SOURCE, this commit changes the WF111_VERSION so that it
contains the entire version number, and then modifies the WF111_SOURCE
definitions to use WF111_VERSION.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wf111: fix overwriting module files during install

When installing the WF111 modules, the module.* files generated during
the kernel compilation were overridden. This ended up having the wrong
information about the modules compiled in a given image (and only the
one about the WF111 module). This could be verified using the
"modprobe -l" command, with only the wf111 module showing up.

This patch fixes this by invoking the install_static target (which
will do both the build and installation) in WF111_INSTALL_TARGET_CMDS.
This way the files are not overridden but instead updated with the
additional WF111 informations.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>