* elf32-m68hc11.c (elf_m68hc11_howto_table): Add the new relocs;
fix masks for PC-rel relocs.
(m68hc11_elf_ignore_reloc): New function.

* elf32-m68hc12.c (m68hc12_elf_special_reloc): New to handle specific
68HC12 banked addressing relocs.
(m68hc12_phys_addr): New to compute physical address of banked memory.
(m68hc12_phys_page): Likewise for page.
(m68hc12_addr_is_banked): New to see if address is in banked area.
(elf_m68hc12_howto_table): Add new relocs and rename to xx12.

* reloc.c (BFD_RELOC_M68HC11_RL_JUMP, BFD_RELOC_M68HC11_RL_GROUP,
BFD_RELOC_M68HC11_LO16, BFD_RELOC_M68HC11_PAGE,
BFD_RELOC_M68HC11_24): New relocs for 68HC11/68HC12.
* bfd-in2.h: Regenerate.

* i386-tdep.c (i386_gdbarch_init): Use
generic_unwind_get_saved_register.

* m68hc11-opc.c: Update call operand to accept the page definition.
Identify instructions that are branches and calls to generate a
RL_JUMP relocation.

* m68hc11-dis.c (print_insn): Take into account 68HC12 memory
banks and fix disassembling of call instruction.
(print_indexed_operand): New param to tell whether
it was an indirect addressing operand (for disassembling call).

* m68hc11.h (M6812_OP_PAGE): Define to identify call operand.
(M68HC12_BANK_VIRT, M68HC12_BANK_MASK, M68HC12_BANK_BASE,
M68HC12_BANK_SHIFT, M68HC12_BANK_PAGE_MASK): Define for 68HC12
memory banks.
(M6811_OC1M5, M6811_OC1M4, M6811_MODF): Fix value.

* procfs.c (procfs_can_use_hw_breakpoint): New function.
(init_procfs_ops): Define ``to_can_use_hw_breakpoint'' for procfs
target vector.
* config/mips/nm-irix5.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT):
Delete.  Add comment regarding this now-deleted target method.

* m68hc11-tdep.c (M68HC12_NUM_PSEUDO_REGS): New define.
(M68HC12_HARD_PC_REGNUM): Define specific PC for 68HC12 (pseudo reg).
(m68hc11_pseudo_register_read): Compute the 68HC12 PC using the
real PC and the page number (if it's within the memory bank window).
(m68hc11_pseudo_register_write): Likewise when saving.
(m68hc11_register_name): Name the virtual pc 'pc' and the real one ppc.
(m68hc11_register_virtual_type): Return uint32 for virtual pc.
(m68hc11_register_raw_size): And use 32-bit for it.
(m68hc11_gdbarch_init): Use 32-bit address for 68HC12 if the
16K memory bank is used by the prog; also use the virtual pc.

* m68hc11-tdep.c (m68hc11_elf_make_msymbol_special): New function.
(m68hc11_gdbarch_init): Install it in gdbarch.
(MSYMBOL_SET_RTC, MSYMBOL_SET_RTI): New to set symbol specific flags.
(MSYMBOL_IS_RTC, MSYMBOL_IS_RTI): New to test these flags.
(MSYMBOL_SIZE): New for documentation.
(insn_return_kind): Enum to specify how a function returns.
(frame_extra_info): Cleanup and record the return mode.
(gdbarch_tdep, USE_PAGE_REGISTER): New to control the use of page
register in address computation.
(m68hc11_get_return_insn): New to obtain the return instruction used
by the function.
(m68hc11_frame_init_saved_regs): Take into account the return
instruction used by the function for far and interrupt functions.
(m68hc11_init_extra_frame_info): Take into account page register.
(m68hc11_frame_args_address): Adjust according to the return mode.
(show_regs): Print page register only when it's used.

* m68hc11-tdep.c (HARD_PAGE_REGNUM): Define for 68HC12 page register.
(M68HC11_LAST_HARD_REG, m68hc11_register_names): Update.
(m68hc11_register_virtual_type): Return a 8-bit type for 8-bit
registers.
(m68hc11_register_raw_size): Likewise.

2002-08-13  Andrew Cagney  <cagney@redhat.com>

* i386-tdep.c (i386_register_name): Handle mmx registers.
(mmx_regnum_p): New function.
(i386_mmx_names): New array.
(mmx_num_regs): New variable.
(i386_pseudo_register_read): New function.
(i386_pseudo_register_write): New function.
(mmx_regnum_to_fp_regnum): New function. Code from Fernando Nasser.

* regcache.c (regcache_raw_read_unsigned): New function.
(regcache_raw_read_signed): New function.
* regcache.h (regcache_raw_read_unsigned): Declare.
(regcache_raw_read_signed): Declare.

2002-08-12  Andrew Cagney  <cagney@redhat.com>
* regcache.c (regcache_raw_read_as_address): Delete function.
(regcache_cooked_read_signed): New function.
(regcache_cooked_read_unsigned): New function.
* regcache.h (regcache_cooked_read_signed): Declare.
(regcache_cooked_read_unsigned): Declare.
(regcache_raw_read_as_address): Delete declaration.
* blockframe.c (generic_read_register_dummy): Use
regcache_cooked_read_unsigned.
* i386-tdep.c (i386_extract_struct_value_address): Use
regcache_cooked_read_unsigned.

2002-08-13  H.J. Lu <hjl@gnu.org>

* objcopy.c (copy_object): Don't warn about the unsupported
architecture unless the input target is defaulted or the
output architecture is different from the input.

* m68hc11-tdep.c (m68hc11_gdbarch_init): Set int, double and long
double sizes according to ELF ABI flags.
(gdbarch_tdep): Record elf_flags.

* m68hc11.h (E_M68HC12_BANKS, E_M68HC11_I32, E_M68HC11_F64,
EF_M68HC11_ABI): Define for ABI specification.
(STO_M68HC12_FAR, STO_M68HC12_INTERRUPT): Symbol flags for
linker and debugger.
(R_M68HC11_24, R_M68HC11_LO16, R_M68HC11_PAGE): New relocs.
(R_M68HC11_RL_JUMP, R_M68HC11_RL_GROUP): New reloc for linker
relaxation.

* m68hc11-tdep.c (M6812_OP_PSHX, M6812_OP_PSHY): New defines.
(m6812_prolog): They can appear in 68HC12 function prologue.
(m68hc11_frame_chain): Cleanup.

* dv-m68hc11eepr.c (struct m68hc11eepr ): Use const char* for filename.

* interp.c (sim_prepare_for_program): Look up the image for the
reset vector and set cpu_use_elf_start to 1 if not found.
(sim_open): Do not set cpu_use_elf_start.

* interp.c (sim_hw_configure): Return 1 for success.
(sim_prepare_for_program): Use the sim_hw_configure exit code to
return SIM_RC_FAIL.

Fix english and ChangeLog entry

* dv-m68hc11.c (m68hc11cpu_io_read_buffer): Translate memory
bank window to some virtual address to read from extended memory.
(m68hc11cpu_io_write_buffer): Likewise for writing.
(attach_m68hc11_regs): When use_bank property is defined, attached
to the 68HC12 16K memory bank window.
* interp.c (sim_hw_configure): Create memory region for banked
memory.

* interp.c (sim_hw_configure): Connect port-X to cpu-write-port.
* dv-m68hc11.c (m68hc11cpu_ports): Add cpu-write-port input.
(m68hc11cpu_port_event): Handle CPU_WRITE_PORT event.

* dv-m68hc11.c (m68hc11cpu_io_write): Fix to update IO mapping
when IO mapping changed, not when internal RAM mapping is changed.

* m68hc11_sim.c (cpu_special): Handle call and rtc instructions.
* sim-main.h (M6812_CALL_INDIRECT): Add to enum.
(m6811_regs): Add page register.
(cpu_set_page, cpu_get_page): New macros.
(phys_to_virt): New function.
(cpu_get_indexed_operand_addr, cpu_return): Declare.
* gencode.c: Identify indirect addressing mode for call and fix daa.
(gen_function_entry): New param to tell if src8/dst8 locals are
necessary.
(gen_interpreter): Use it to avoid generation of unused variables.
* interp.c (sim_fetch_register): Allow to read page register; page
register, A, B and CCR are only 1 byte wide.
(sim_store_register): Likewise for writing.

* header.sed: Strip tabs.

* ld.texinfo (ALIGN): Remove power of 2 restriction.

* emulparams/elf32_dlx.sh (TARGET_PAGE_SIZE): Set to 1.
(MAXPAGESIZE): Set to 1.

* ld.h (ALIGN_N): Delete.
* ldexp.h (align_n): Declare.
* ldexp.c (align_n): New function.
(fold_binary): Use align_n instead of ALIGN_N.
(exp_fold_tree): Likewise.
* ldlang.c (lang_size_sections_1): Likewise.
(lang_one_common): Likewise.

*** empty log message ***

daily update

2002-08-12  H.J. Lu <hjl@gnu.org>

* elflink.h (elf_add_default_symbol): Preserve section across
elf_merge_symbol.

2002-08-12  H.J. Lu <hjl@gnu.org>

* ld-elfvers/vers.exp: Add vers23.

* ld-elfvers/vers23.c: New.
* ld-elfvers/vers23.dsym: New.
* ld-elfvers/vers23.ver: New.
* ld-elfvers/vers23a.c: New.
* ld-elfvers/vers23a.dsym: New.
* ld-elfvers/vers23a.map: New.
* ld-elfvers/vers23a.sym: New.
* ld-elfvers/vers23a.ver: New.
* ld-elfvers/vers23b.c: New.
* ld-elfvers/vers23b.dsym: New.
* ld-elfvers/vers23b.map: New.
* ld-elfvers/vers23b.ver: New.

2002-08-12  Andrew Cagney  <cagney@redhat.com>

* i386-tdep.h (i386_register_byte, i386_register_raw_size): Delete
declarations.
* i386-linux-tdep.c (i386_linux_register_byte): Delete function.
(i386_linux_register_raw_size): Delete function.
i386_linux_init_abi): Update.
* i386-tdep.c (i386_register_raw_size): Delete function.
(i386_register_byte): Delete function.
(i386_gdbarch_init): Update.
(i386_register_size): Delete array.
(i386_register_offset): Delete array.

* config/i386/tm-symmetry.h (REGISTER_BYTE): Delete macro.
(REGISTER_RAW_SIZE): Delete macro.
* config/i386/tm-ptx.h (REGISTER_RAW_SIZE): Delete macro.
(REGISTER_BYTE): Delete macro.

* ld-sh/sh64/abi32.xd: Adjust whitespace in elf32 section
listing.
* ld-sh/sh64/cmpct1.xd, ld-sh/sh64/mix1.xd, ld-sh/sh64/mix2.xd,
ld-sh/sh64/rel32.xd, ld-sh/sh64/shdl32.xd: Likewise.

* ld-sh/sh64/abi32.xd: Adjust as type of linker-script-symbols
is no longer set to object.
* ld-sh/sh64/abi64.xd, ld-sh/sh64/cmpct1.xd, ld-sh/sh64/crange1.rd,
ld-sh/sh64/crange2.rd, ld-sh/sh64/crange3-cmpct.rd,
ld-sh/sh64/crange3-media.rd, ld-sh/sh64/crange3.rd,
ld-sh/sh64/mix1.xd, ld-sh/sh64/mix2.xd, ld-sh/sh64/shdl32.xd,
ld-sh/sh64/shdl64.xd: Likewise.

[gas/]
* config/tc-mips.c (mips_ip): Don't work out the value of
constant %hi()s here.

[gas/testsuite/]
* gas/mips/elf-consthilo.[sd]: New test.
* gas/mips/mips.exp: Run it.

*** empty log message ***

daily update

* ada-lang.c (ada_lookup_partial_symbol)
(to_fixed_variant_branch_type) (find_line_in_linetable): Fix
prototype names so that grep ^func works properly.

* ada-lang.c (ada_array_element_type)
(ada_lookup_partial_symbol): Fix typos in parameter list.

* ada-valprint.c (val_print_packed_array_elements) (ada_val_print_1):
Fix prototype names so that grep ^func works properly.

*** empty log message ***

daily update

* config/tc-i386.c (tc_i386_fix_adjustable): Test OUTPUT_FLAVOR
for ELF, and don't bother checking ELF relocs when non-ELF.
(i386_immediate): Allow absolute_section expressions for aout.
(i386_displacement): Likewise.  Also test bfd_is_com_section.
(md_estimate_size_before_relax): Test OUTPUT_FLAVOR for ELF.
(md_apply_fix3): Hack for bfd_install_relocation when fx_pcrel,
not when fx_addsy.  Remove dead code.

* ld-discard/discard.exp: Don't run on linuxaout or linuxoldld.
* ld-linkonce/linkonce.exp: Likewise.
* ld-selective/sel-dump.exp: Likewise.
* ld-selective/selective.exp: Don't run on aout or bout.

2002-08-10  Andrew Cagney  <cagney@redhat.com>
            Elena Zannoni  <ezannoni@redhat.com>
            Martin M. Hunt  <hunt@redhat.com>

* gdbtypes.c (build_builtin_type_vec128): Set the vector bit.
(build_builtin_type_vec128i): Set the vector bit.
* gdbtypes.h (builtin_type_vec64, builtin_type_vec64i): Declare.
* gdbtypes.c (builtin_type_vec64, builtin_type_vec64i): Define.
(build_builtin_type_vec64): New function.
(build_builtin_type_vec64i): New function.
(build_gdbtypes): Initialize builtin_type_vec64 and
builtin_type_vec64i.

2002-08-09  Andrew Cagney  <cagney@redhat.com>

* regcache.c (regcache_dump): Compare the register offset
with REGISTER_BYTE.
* arch-utils.c (generic_register_byte): New function.
* arch-utils.h (generic_register_byte): Declare.
* gdbarch.sh (REGISTER_BYTE): Default to generic_register_byte.
* gdbarch.h, gdbarch.c: Regenerate.

Oversights in previous checkin.

Shh, revert unintended commit.

2002-08-09  Andrew Cagney  <cagney@redhat.com>

* regcache.c: Include "gdbcmd.h"
(_initialize_regcache): Add commands "maintenance print
registers", "maintenance print raw-registers" and "maintenance
print cooked-registers".
(enum regcache_dump_what): Define.
(dump_endian_bytes): New function.
(regcache_dump): New function.
(regcache_print): New function.
(maintenance_print_registers): New function.
(maintenance_print_raw_registers): New function.
(maintenance_print_cooked_registers): New function.
* Makefile.in (regcache.o): Update dependencies.

2002-08-09  Michael Snyder  <msnyder@redhat.com>

* mips-tdep.c (ROUND_DOWN, ROUND_UP): Move to global scope.
(mips_push_arguments): Correct some comments.  Use paddr_nz
for printing addresses in debug output.  Replace static
allocation using MAX_REGISTER_RAW_SIZE with alloca.
(mips_n32n64_push_arguments): New function, cloned from
mips_push_arguments and tuned for the n32/n64 ABI.
(mips_push_register): Buffer needs dynamic allocation.
(mips_print_register): Ditto.
(do_gp_register_row): Ditto.
(mips_store_return_value): Ditto.
(mips_gdbarch_init): Set gdbarch_push_arguments per ABI.

*** empty log message ***

daily update

2002-08-09  Don Howard  <dhoward@redhat.com>

        * memattr.c (mem_info_command): Print special case of upper bound
        as max CORE_ADDR + 1.

2002-08-08  Michael Snyder  <msnyder@redhat.com>

* mips-tdep.c (mips_n32n64_use_struct_convention): N32 only
returns structs by ref if they're too big to fit in two registers.

Fix minor formatting problem in previous patch.

* mips-tdep.c (mips_init_extra_frame_info): Initialize SP_REGNUM's
saved regs value.
(read_next_frame_reg): Call FRAME_INIT_SAVED_REGS instead of
mips_find_saved_regs().
(mips_pop_frame): Likewise.

* blockframe.c (frame_saved_regs_register_unwind): Revise
PC_IN_CALL_DUMMY assertion to only apply when generic dummy
frames are in use.

    * remote.c: (remote_wait, remote_async_wait): Add check for awatch
        T-packets; the 'a' is not taken as a register number.
(remote_check_watch_resources, remote_stopped_by_watchpoint)
        (remote_stopped_data_address): New functions; add to target
        vector.
        (remote_insert_hw_breakpoint, remote_remove_hw_breakpoint): Change
        prototypes to match other implementations of this
        function. replace integer argument with pointer -- the length
        field in the Z-packet is the length of what is pointed to or 1 if
        pointer is null. Add to target vector.
        (remote_insert_watchpoint, remote_remove_watchpoint): Add to
        target vector.

        From Mark Salter:
        * remote.c (remote_wait): Add support to extract optional
        watchpoint information from T-packet. Ignore unrecognized
        optional info in T-packet.
        (remote_async_wait): Ditto.
doc:
From Mark Salter:
* gdb.texinfo (Protocol): Document T packet extension to
allow watchpoint address reporting.

* cli/cli-dump.c: Change fopen modes to use binary open modes
as defined in include/fopen-bin.h throughout.

Oops - omitted from previous delta

Add QNX Neutrino PowerPC support and common up QNX functions

Updated Swedish translation

* config/tc-i386.h: Reorganize.

* config/tc-mips.c (macro): Handle a register plus a 16-bit
immediate offset in "dla" and "la" expansions.
* gas/mips/empic.d: Treat "addiu" and "daddiu" as equivalent when
$0 is source.
* mips-opc.c (mips_builtin_opcodes): Remove "dla" and "la" as
aliases to "daddiu" and "addiu".

* elfxx-mips.c (mips_elf_global_got_index): Avoid segfault if
g->global_gotsym is NULL.

Add the missing space.

2002-08-08  H.J. Lu <hjl@gnu.org>

* ld-elfvers/vers.exp: Add vers22.

* ld-elfvers/vers22.c: New.
* ld-elfvers/vers22.dsym: New.
* ld-elfvers/vers22.map: New.
* ld-elfvers/vers22.ver: New.
* ld-elfvers/vers22a.c: New.
* ld-elfvers/vers22a.dsym: New.
* ld-elfvers/vers22a.sym: New.
* ld-elfvers/vers22a.ver: New.
* ld-elfvers/vers22b.c: New.
* ld-elfvers/vers22b.dsym: New.
* ld-elfvers/vers22b.ver: New.

2002-08-08  H.J. Lu <hjl@gnu.org>

* elflink.h (elf_add_default_symbol): Don't warn a defintion
overrides an indirect versioned symbol.

* configure.in: bfd_gas=yes for all i386 targets.  Formatting.
Remove "bfd_gas=yes" from target table when covered later.
Consolidate some entries.
* configure: Regenerate

2002-08-08  Michael Snyder  <msnyder@redhat.com>

* mips-tdep.c: Minor whitespace and indentation clean-ups.

* doublest.c (store_floating): Avoid floatformat_from_doublest()
assertion failure by returning early after a warning.

* config/tc-i386.c (output_insn): Save frag_now and frag_now_fix ()
at start of insn, pass it to output_disp and output_imm.
(output_disp): Added arguments.  If _GLOBAL_OFFSET_TABLE_ is seen
in displacement for R_386_32 reloc, use R_386_GOTPC and compute
properly addend.
(output_imm): Added arguments.  Compute properly addend for
R_386_GOTPC.
(md_apply_fix3): Remove R_386_GOTPC handling.
* testsuite/gas/i386/gotpc.s: New.
* testsuite/gas/i386/gotpc.d: New.
* testsuite/gas/i386/i386.exp: Add gotpc test.

daily update

*** empty log message ***

Multiarch FRAME_INIT_SAVED_REGS for mips.

* mips-tdep.c (mips_find_saved_regs): Make static.
(mips_frame_init_saved_regs): New function.
(mips_gdbarch_init): Setup FRAME_INIT_SAVED_REGS method.
* config/mips/tm-mips.h (FRAME_INIT_SAVED_REGS): Delete macro.
(mips_find_saved_regs): Delete declaration.

2002-08-06  Michael Snyder  <msnyder@redhat.com>

* config/mips/tm-mips.h: Remove #define USE_STRUCT_CONVENTION.

* elf32-i386.c (elf_i386_relocate_section): Fill in proper addend
for R_386_TLS_TPOFF32 relocs against symndx 0.

* remote.c (remote_wait, remote_async_wait): Change
thread_num from int to ULONGEST.
(unpack_varlen_hex): Change result parameter from
int * to ULONGEST *.

2002-08-08  Andrew Cagney  <ac131313@redhat.com>

* configure.tgt: Replace powerpc-*-sysv*, powerpc-*-elf*,
powerpcle-*-eabi*, powerpcle-*-sysv* and powerpcle-*-elf* with
powerpc*-*-*.
* MAINTAINERS: Remove redundant rs6000-ibm-aix4.1 target.

2002-08-08  Andrew Cagney  <cagney@redhat.com>

* gcore.c (override_derive_stack_segment): Delete variable.
(preempt_derive_stack_segment): Delete function.
(derive_stack_segment): Delete function.
(default_derive_stack_segment): Renamed to derive_stack_segment.
(override_derive_heap_segment): Delete variable.
(preempt_derive_heap_segment): Delete function.
(derive_heap_segment): Delete function.
(default_derive_heap_segment): Rename to derive_heap_segment.

Check symbols with undefine version.

2002-08-06  Michael Snyder  <msnyder@redhat.com>

        * config/mips/tm-mips.h: Remove #define USE_STRUCT_CONVENTION.
* mips-tdep.c (mips_EABI_use_struct_convention,
mips_OABI_use_struct_convention, mips_NABI_use_struct_convention):
New functions.  (mips_use_struct_convention): Delete.
(mips_gdbarch_init): set use_gdbarch_convention.

* elflink.h (elf_link_output_extsym): Don't output symbols from
SEC_EXCLUDE sections.

* aoutx.h (aout_link_write_symbols): Correct handling of warning syms.

daily update

*** empty log message ***

merge from gcc

2002-08-06  Michael Snyder  <msnyder@redhat.com>

*  mips-tdep.c: gdbarch-ify reg_struct_has_addr.
(mips_eabi_reg_struct_has_addr, mips_n32n64_reg_struct_has_addr,
mips_o32_reg_struct_has_addr): New functions.
(mips_gdbarch_init): Set gdbarch reg_struct_has_addr.

2002-08-07  Andrew Cagney  <ac131313@redhat.com>

* regcache.c (pseudo_register): Delete function.
(fetch_register): Delete function.
(store_register): Delete function.
(regcache_raw_read, legacy_read_register_gen): Use
target_fetch_registers instead of fetch_register.
(legacy_write_register_gen, regcache_raw_write): Use
target_store_register instead of store_register.
(write_register_bytes): Ditto.

* gdbarch.sh (FETCH_PSEUDO_REGISTER): Delete.
(STORE_PSEUDO_REGISTER): Delete.
* gdbarch.h, gdbarch.c: Regenerate.

Only search for an interworking bfd if there are input bfds.

* cli/cli-dump.c (add_dump_command): Explicitely use "b" flag to
write dump file binary.

* elf64-ppc.c (edit_opd): Arrange to drop symbols for discarded .opd
entries.

* elfxx-mips.c (mips_elf_create_dynamic_relocation): Cast signedness
mismatch.

* elfxx-mips.c (ABI_64_P): Remove superfluous check.

* elf32-mips.c (mips_reloc_map): Fix typo.

2002-08-05  Michael Snyder  <msnyder@redhat.com>

*  mips-tdep.c (mips_find_saved_regs): Adjust stack according
to MIPS_SAVED_REGSIZE, not GDB_TARGET_IS_MIPS64.  Enhance comment.
(mips_gdbarch_init): Set N32 target to be mips64.

daily update

*** empty log message ***

* frame.c (find_saved_register): Break out of loop once saved
register address is found.  Don't mention sparc in loop comment
anymore.

    * config/tc-alpha.c (cpu_types): Enabled ev67, ev68,  -m21264a
        and m21264b processor names and cpu types.
        * doc/c-alpha.texi: Documented new types.

Add myself as Alpha maintainer.