qt5: add libQt5OpenGL.so library installation

When qt5 is built with EGLFS support, libQt5OpenGL library should be copied to
target.

Signed-off-by: Wojciech Slenska <wojciech.slenska@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gutenprint: ensure target and host variant have the same patch hooks

In preparation for the out-of-tree support, it is important that all
packages have the same patch hooks for the host variant and the target
variant (because the source tree will be shared between host and
target variants when doing out-of-tree build).

In the case of gutenprint, the patch hook executed for the target just
creates one directory which is needed for autoreconf to work, and the
host variant is not autoreconf'ed. So there is no harm in also
applying this patch hook to the host variant.

[Peter: autoreconf for host as pointed out by Arnout]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xlib_libX11: ensure target and host variant have the same patch hooks

In preparation for the out-of-tree support, it is important that all
packages have the same patch hooks for the host variant and the target
variant (because the source tree will be shared between host and
target variants when doing out-of-tree build).

In the case of the xlib_libX11 package, the post-patch hook removes
some flags from the build of the makekeys utility, so that when
xlib_libX11 is built for the target, the build of makekeys for the
host works properly. This modification can be applied to the host
variant of xlib_libX11 without any problem.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libgtk2: remove useless post-patch hook

There used to be a post-patch hook to apply a patch only on the host
variant of libgtk2. However, after the reorganization of the patch
naming policy, this was no longer working properly, so
dd1848bc73ee9dfe211ca3ed3a233707e3bc5955 changed this by a patch that
works on both the target and host variants.

We can therefore get rid of the useless post-patch hook.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

binutils: apply post-patch hook on both the host and target builds

When a Xtensa specific patch needs to be applied, it should be applied
both when doing the target and the host build.

This change is part of the effort to remove the differences between
host and target post-extract and post-patch hooks, that are
problematic for the out-of-tree support.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gettext: don't patch different the host and target build

Until now, the gettext source code was being patched differently for
the host and the target build, which is going to be incompatible with
out-of-tree build. The difference is that the gettext tools could be
disabled in the target build, but are always enabled on the host
build.

Therefore, this commit switches the gettext package to using proper
patches against the relevant configure.ac and Makefile.am
files. gettext is now being autoreconfigured. Configuration options
are also passed for the host variant, in order to disable the build of
a large number of things we don't care about.

Finally, the two existing patches are renamed to include a number in
their filename.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

neard: add init script

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libopenmax: Add libopenmax virtual package

this adds the libopenmax virtual package for hardware based video acceleration

[Peter: fix openmax-without-any-backends check]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libvpx: new package libvpx

adds webm multimedia support and the VP8 encoder/decoder library.

http://www.webmproject.org/

[Peter: strip trailing spaces, wrap help text]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

system/device-table: do not set /home/default stgid

Currently, /home/default is mode 2755 which means it is setgid.
Since /home/default is not group-writable, it is useless.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

configs: add sample for olimex mx233 olinuxino

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

logrotate: Bump version to 3.8.4

The changelog for logrotate indicates some CVE's were fixed in 3.8.0.
(changelog at http://svn.fedorahosted.org/svn/logrotate/tags/r3-8-4/CHANGES)

Signed-off-by: Arne Rovet <arnerro@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

network-manager: bump to 0.9.8.0

This upstream version (the latest available at the time of this
writing) contains
http://cgit.freedesktop.org/NetworkManager/NetworkManager/commit/?id=6b64e4db2f3c9cfc0e0e240cf0bc58f3b3e90c1f
which fixes a build issue of network-manager against recent kernel
headers.

We also remove our patch against network-manager, because it has been
merged upstream as commit cbf72aeb34a6f1fd1bcd7f78ae88985154dc85af.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

network-manager: use a <pkg>_VERSION_MAJOR variable

Just like we do for many other GNOME-hosted tarballs, use a
<pkg>_VERSION_MAJOR variable for network-manager.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gpu-viv-bin-mx6q: new package

This patch adds a new package for the OpenGL, OpenVG and EGL
proprietary implementations specific to the Vivante GPU of i.MX6
processors.

[Peter: show comment on uClibc toolchains, tweak help text]
Signed-off-by: Henk Fijnvandraat <h.fijnvandraat@inter.nl.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

freescale-imx: bump to 1.1.0

This commit bumps both imx-lib and firmware-imx to version 1.1.0.

Signed-off-by: Henk Fijnvandraat <h.fijnvandraat@inter.nl.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

firmware-imx: move to the freescale-imx directory

This commit moves the firmware-imx package to the newly introduced
freescale-imx/ directory, and uses the new variables provided by
freescale-imx/freescale-imx.mk.

Signed-off-by: Henk Fijnvandraat <h.fijnvandraat@inter.nl.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

imx-lib: move to the freescale-imx directory

This commit moves the imx-lib package to the newly introduced
freescale-imx/ directory, and uses the new variables provided by
freescale-imx/freescale-imx.mk.

Signed-off-by: Henk Fijnvandraat <h.fijnvandraat@inter.nl.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

freescale-imx: new package directory

The freescale-imx directory is intended to contain all freescale
i.MXyy related packages, together with their download site and version
info

Signed-off-by: Henk Fijnvandraat <h.fijnvandraat@inter.nl.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

cubieboard: add support

[Peter: adjust for _FEX_FILE]
Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

sqlite: bump to version 3.7.17

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

mpg123: bump to version 1.15.4

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gmp: bump to version 5.1.2

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

sunxi-boards: new package

[Peter: depend on arm, wrap help, change to _FEX_FILE option, error on empty]
Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

bzip2: improve the packaging

Instead of doing some nasty SED tricks, use a patch that modifies the
bzip2 build system to make it a little bit nicer. Those SEDs were made
differently for the host and target packages, which is contrary to the
logic of not having any difference in the source tree between the host
build and the target build.

This commit also makes sure that bzip2.mk behaves properly in a
BR2_PREFER_STATIC_LIB=y context.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gdb: apply post-patch hook on both the host and target builds

When a Xtensa specific patch needs to be applied, it should be applied
both when doing the target and the host build.

This change is part of the effort to remove the differences between
host and target post-extract and post-patch hooks, that are
problematic for the out-of-tree support.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

attr: bump to version 2.4.47

The attr-0001-attr-Fix-static-build-installation.patch has been integrated
in the new upstream version.

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

acl: bump to version 2.2.52

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

sunxi-tools: new host/target package

[Peter: Fix Config.in wordwrap and trailing lines]
Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain-external: remove support for 'Sourcery CodeBench ARM 2011.03'

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain-external: add support for 'Sourcery CodeBench ARM 2013.05'

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

dropbear: factorize the 'depends on BR2_PACKAGE_DROPBEAR'

Enclose all dropbear sub-options into a 'if BR2_PACKAGE_DROPBEAR'
... 'endif' block rather than having 'depends on BR2_PACKAGE_DROPBEAR'
for each option.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

numactl: new package

[Thomas: updated to 2.0.8, restricted to supported architectures,
added licensing informations, updated to latest Buildroot package
infrastructure]

[Peter: Fix LICENSE_FILES typo, needs largefile support in toolchain]
Signed-off-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

git: new package

[Peter: needs largefile, fix license info]
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

skeleton: add default login port to /etc/securetty

We ran into a "Login incorrect" problem when running the same rootfs
image across platforms with different loging ports ttyS0/1/2/3.

Simply assignning "console" to BR2_TARGET_GENERIC_GETTY_PORT, which in
turn modifies the /etc/inittab, is not enough because the "console" device
was missing in the /etc/securetty.

While current securetty has enumerated a lot of ttys, this patch should save
some efforts to enumerate more.

[Peter: guard with single quotes]
Signed-off-by: Tzu-Jung Lee <tjlee@ambarella.com>
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Remove spurious POST_UNINSTALL hook usage

A couple of patches make use of XXX_POST_UNINSTALL_TARGET_HOOKS, which
is not a hook set that Buildroot actually supports.

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

aespipe: new package

Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libnss: bump to version 3.14.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libnspr: add license info

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

ed: Convert to generic package infrastructure

The package uses custom configure and Makefile files.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libnspr: Bump version to 4.9.6.

This fixes the build for aarch64.

Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libsigsegv: Version bump to 2.10

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

udpcast: Add udpcast-select-h.patch.

This patch fixes the build on AArch64 (and potentially others).
The patch has been submitted upstream.

Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

udpcast: Bump version to 20120424.

Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

pixman: Apply upstream patch to fix compilation on MIPS

Fixes:
http://autobuild.buildroot.net/results/38aa4f2a2269b80226b910c46e0c9abe7dc38ff8/

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

pixman: Version bump to 0.30.0

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

beaglebone: enable NFS root support

Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

beaglebone: add am33x-cm3 to the build

Add the FW needed for the Cortex M3 on the beaglebone. This is required
for working power management.

Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

am33x-cm3: add FW for suspend/resume

Without this firmware, the beaglebone won't be able to suspend/resume
correctly.

[Peter: tweak Config.in, rename init script, wrap long lines]
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

beaglebone: update to linux 3.8

As the beaglebone support is mainlined, there's no support for the old
board setup files, and the only supported run-time configuration is through
the device tree.

We're also setting the kernel headers to follow the 3.8 series.

Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

package/dtc: add option to install programs

By default, we only install the libfdt library.

As suggested by Arnout, add an option that also
installs the few dtc programs.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

package/dtc: new package

dtc is the Device Tree Compiler, and manipulates device trees.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

package/libbsd: new package

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

package/pmake: add host pmake

pmake is the make command used by the BSD.
It will used to build BSD-related packages, coming later.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gawk: bump to version 4.1.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

dnsmasq: bump to version 2.66

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

less: bump to version 458

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

httping: bump to version 2.2.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

fftw: bump to version 3.3.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

ipset: bump to version 6.19

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

samba: bump to version 3.6.15

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Choose xz compressed tarball for linux kernel.

Prefer xz compressed tarball so some bandwidth is saved for kernel headers
and kernel itself downloads.

Signed-off-by: Raúl Sánchez Siles <rasasi78@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

sane-backends: handle sane-config script

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

python3: remove another config script

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

python: remove stale python2-config symbolic link

We already remove python2.7-config and the symbolic link
python-config, but we forgot to remove the python2-config symbolic
link.

Note that we can't use the <pkg>_CONFIG_SCRIPTS mechanism here because
python2.7-config is written in... Python, and doesn't follow the usual
syntax of <pkg>-config scripts. It takes the paths directly from
distutils.sysconfig.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

liblog4c-localtime: handle log4c-config script

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

liblog4c-localtime: remove whitespace at beginning of lines

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

netsnmp: handle net-snmp-config script

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

netatalk: handle netatalk-config script

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libvncserver: handle libvncserver-config script

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libftdi: handle libftdi-config script

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libesmtp: handle libesmtp-config script

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libcdaudio: handle libcdaudio-config script

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libart: handle libart2-config script

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

imlib2: handle imlib2-config script

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gsl: handle gsl-config script

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

fltk: handle fltk-config script

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libcgicc: handle cgicc-config script

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

luafilesystem: bump to version 1.6.2

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

ptpd2: new package

Add the ptpd2 package, handles the IEEE 1588-2008 spec which is not
backward compatible to IEEE 1588-2002.

[Peter: mark init script as executable]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

ptpd: new package

Add the new ptpd package, loosely based on the one from bug #2305.
This one handles the IEEE 1588-2002 spec.

[Peter: mark init script as executable]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Update for 2013.05-rc1

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

CHANGES: update with recent changes

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

configs: add basic defconfig for openblocks a6

For details, see http://openblocks.plathome.com/products/a6/

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

udev: add license information

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

various packages: fix license information

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

CHANGES: update with recent changes

And also fixup tabs/spaces mix as pointed out by Thomas.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

linux: bump 3.9.x stable version

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kernel-headers: bump 3.{0, 4, 8, 9}.x stable version

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

patch: fix license information

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

msmtp: bump to version 1.4.31

Also added license information

Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

chrony: new package

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gperf: add license information

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain/crostool-NG: mark as deprecated

For the following reasons:
  - it used to be broken without anyone noticing for a long time,
  - it is still not fully integrated within the Buildroot set of options,
  - it has not gained much traction (not even I use it),
  - I've always argued that sustained development should use an external
    toolchain, and not rely on building one with Buildroot,
  - I did not submit any of the enhancements requested during the last
    developpers' day in Brussels,
  - I have neither the incentive nor the time to maintain and enhance it,

it is time to deprecate the crosstool-NG backend for the 2013.05 release.

Then, it will be entirely removed early in the 2013.08 cycle, to let some
time for those that rely on it to voice their opinions. ;-)

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

CHANGES: update with recent changes

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

dropbear: disable standalone mode for nommu

dropbear for nommu targets must disable the standalone (non-inetd) mode
since the platform lacks fork(), fixes:
http://autobuild.buildroot.net/results/ecbdfab10f54bec75c112bbf005bba9ae2b18dc8/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

jquery-ui-themes: use a choice option for theme name

A bit more user friendly than asking people to figure out the available
themes manually.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

jquery-ui-themes: strip theme name

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

configs: update boards to u-boot custom version option

Some board configs where left out of the u-boot custom version
migration, so do it otherwise they'll just pull the latest version which
might not work and brick the device.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

configs: use new u-boot custom version option

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>