package/binutils: remove version 2.28

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/binutils: remove special case version selection for ARM Thumb

Binutils 2.29 and 2.30 are affected by a bug in ADR and ADRL
pseudo-instruction [1] that was fixed in Binutils 2.31 [2].

  * The ADR and ADRL pseudo-instructions supported by the ARM assembler
    now only set the bottom bit of the address of thumb function symbols
    if the -mthumb-interwork command line option is active.

Due to this issue, we were default to binutils 2.28 for ARM Thumb. But
now that the issue has been fixed in binutils 2.31 and that this
version is the default, the special casing to use 2.28 is no longer
needed.

[1] https://sourceware.org/bugzilla/show_bug.cgi?id=21458
[2] https://sourceware.org/ml/binutils/2018-07/msg00213.html

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

linux: update the comment about thumb issue with Binutils 2.29 and 2.30

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/binutils: switch to use 2.31.x as the default version

Now that binutils 2.32 has been released, it is time to move to
binutils 2.31.x as the default binutils version, instead of 2.29.1.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/systemd: use util-linux' agetty, drop patch

We currently have a patch that replaces the use of (hard-coded) agetty
in systemd, to use just plain getty. That patch dates back to commit
f4a5eed474c (Add the systemd package), when util-linux was not a
dependency, and we relied on busybox to actually provide getty.

But nowadays, util-linux is a mandatory dependency of systemd anyway.
agetty is about 42KiB, while busybox' getty is around 5KiB (give or
take). That's an extra ~40KiB, but it has to be balanced against the
rest of the system: systemd only runs on a glibc system, needs dbus and
thus expat, and kmod, that a ~40KiB overhead is barely noticeable (a
miminal systemd setup with nothing enabled, on ARM, is already ~20MiB)

So, drop our agetty-dropping patch, and forcibly enable agetty in
util-linux.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Adam Duskett <aduskett@gmail.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

linux{, -headers}: support downloads of v5+

With the arrival of linux v5.0, we need yet another condition to set
_SITE correctly. Instead of continuing this madness, solve the problem
generically: use v2.6 for 2.6.*, and use the number before the first dot
in the other cases.

While we're at it, remove the comment which has been incorrect since
80d7b68167a5c8893e906ace6b5f0b0166336406 (7 years ago).

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Tested-by: Adam Duskett <aduskett@gmail.com>
Reviewed-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/linux-headers: fix support for -rc kernels

-rc kernels after v3.x are no longer available in the testing
subdirectory. Instead they should be fetched from cgit.

Commit ff4cccbdcf5417a5a8c251ff302791a306023cc1 did this for linux
itself, now we also do it for linux-headers.

When fetched from cgit, .tar.xz can't be used. Adding this to the
existing condition is not so simple, so refactor how _SOURCE is set:
simply set it explicitly in each branch of the condition. While more
verbose (it is repeated 4 times), it's easier to understand and to
maintain.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/systemd: bump version to 241

In addition:
  - Remove patches that have been committed upstream.
  - Update hash for the README file. (Meson and Dbus dependency version updates)

./support/testing/run-tests -d dl -o output -k tests.init.test_systemd
14:18:20 TestInitSystemSystemdRwNetworkd          Starting
14:18:21 TestInitSystemSystemdRwNetworkd          Building
14:26:20 TestInitSystemSystemdRwNetworkd          Building done
14:27:01 TestInitSystemSystemdRwNetworkd          Cleaning up
.14:27:01 TestInitSystemSystemdRwIfupdown         Starting
14:27:01 TestInitSystemSystemdRwIfupdown          Building
14:28:35 TestInitSystemSystemdRwIfupdown          Building done
14:29:03 TestInitSystemSystemdRwIfupdown          Cleaning up
.14:29:03 TestInitSystemSystemdRwFull             Starting
14:29:04 TestInitSystemSystemdRwFull              Building
14:44:35 TestInitSystemSystemdRwFull              Building done
14:45:18 TestInitSystemSystemdRwFull              Cleaning up
.14:45:18 TestInitSystemSystemdRoNetworkd         Starting
14:45:19 TestInitSystemSystemdRoNetworkd          Building
14:55:59 TestInitSystemSystemdRoNetworkd          Building done
14:56:23 TestInitSystemSystemdRoNetworkd          Cleaning up
.14:56:23 TestInitSystemSystemdRoIfupdown         Starting
14:56:24 TestInitSystemSystemdRoIfupdown          Building
15:06:42 TestInitSystemSystemdRoIfupdown          Building done
15:07:09 TestInitSystemSystemdRoIfupdown          Cleaning up
.15:07:09 TestInitSystemSystemdRoFull             Starting
15:07:10 TestInitSystemSystemdRoFull              Building
15:21:17 TestInitSystemSystemdRoFull              Building done
15:21:46 TestInitSystemSystemdRoFull              Cleaning up
.
----------------------------------------------------------------------
Ran 6 tests in 3806.472s

OK

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libpcap: disable dbus to break circular dependency

The optional dbus dependency of libpcap creates a circular dependency
chain:

$ make libpcap-show-recursive-depends

Recursion detected for  : systemd
which is a dependency of: dbus
which is a dependency of: libpcap
which is a dependency of: iptables
which is a dependency of: systemd
make: *** [package/libpcap/libpcap.mk:55: libpcap-show-recursive-depends] Error 1

Of all these dependencies the one of libpcap on dbus seems to be less
useful. Drop it.

Fixes:
http://autobuild.buildroot.net/results/0b5d18bff816cbcee11e8645449701722d956de5/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/x11r7/xapp_xdm: security bump to version 1.1.12

Fixes CVE-2013-2179.

Release notes:
https://lists.x.org/archives/xorg-announce/2019-March/002959.html

Added all license hashes provided by upstream and license hash.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/avahi: add upstream security fix

Fixes CVE-2017-6519: avahi-daemon in Avahi through 0.6.32 and 0.7
inadvertently responds to IPv6 unicast queries with source addresses
that are not on-link, which allows remote attackers to cause a denial
of service (traffic amplification) and may cause information leakage
by obtaining potentially sensitive information from the responding
device via port-5353 UDP packets.

Signed-off-by: Artem Panfilov <panfilov.artyom@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-aioblescan: new package

Python library to scan and decode advertised BLE info.
Uses asyncio.

https://github.com/frawau/aioblescan

Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/liblo: bump to version 0.30

- Remove both patches (already in version)
- Add sha256 hash

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ngircd: bump to version 25

- Remove patch (already in version)
- Add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/bash: add upstream patches up to patch level 23

We unfortunately cannot easily download these because of the file names (not
ending in patch) and patch format (p0), so convert to p1 format and include
in package/bash with the following script:

j=1; for i in 19 20 21 22 23; do
    file=$(printf '%04d-patch44-0%d.patch' $j $i)
    cat > $file << EOF
>From https://ftp.gnu.org/gnu/bash/bash-4.4-patches/bash44-0$i

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
EOF
    curl https://ftp.gnu.org/gnu/bash/bash-4.4-patches/bash44-0$i | \
        sed -e 's|^\*\*\* \.\./|*** |' -e 's|^--- |--- b/|' >> $file

    j=$(( j + 1 ))
done

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/kexec: update to 2.0.18

This release fixes the following issue with new kernels:

kexec --load bzImage --reuse-cmdline
Unhandled rela relocation: R_X86_64_PLT32

Signed-off-by: Adrien Gallouët <adrien@gallouet.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libiio: bump to version 0.15

This change bumps libiio, to version 0.15.
This version is currently the most stable version in the series. It
contains several fixes over 0.14.

0.16 & 0.17 have been released but they have some issues with backwards
compatibility, so they are not yet recommended.

Changelog for version 0.15 (over 0.14).
Link:
  https://github.com/analogdevicesinc/libiio/releases/tag/v0.15

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ulogd: bump to version 2.0.7

- Remove three patches (already in version)
 - Add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ulogd: add postgresql optional dependency

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Revert "package/qt5/qt5webengine: fix comment on GL dependencies"

This reverts commit 6fb4c14ecb1e8f001449830b65ec2a4606b87682. Indeed,
as Peter Seiderer pointed out, the comment is in fact partially
correct: with Qt 5.6, QT5DECLARATIVE_QUICK does require OpenGL
support.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/qt5/qt5webengine: fix comment on GL dependencies

qt5declarative can be built/used without opengl support so fix the
dependency comment in qt5webengine.

Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain: set the ssp gcc option in kconfig

Currently, we repeat all the SSP level selection deep down to the
toolchain wrapper itself, where we eventually translate it to the
actual SSP option to use. This is a bit redundant.

Additionally, we will want to check that the toolchain actually
supports that option (for those toolchain where it was backported).

So, move the translation into kconfig, and add the qstrip'ed value
to the additional flags passed to the wrapper. Add it before
user-supplied opitons, to keep the previous behaviour (and allow
anyone crazy-enough to override it with BR2_TARGET_OPTIMIZATION).

Signed-off-by: "Yann E. MORIN" <yann.morin@orange.com>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

toolchain: prepare to pass more additional CFLAGS via the wrapper

Currently, we pass the user-supplied so-called target optimisation flags
to the wrapper.

We're going to have additional such CFLAGS to pass, so push-back the
formatting loop to quote the options at the last moment.

Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin@orange.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/gst1-plugins-bad: add zbar plugin option

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/zbar: bump version to 0.22

- change from git download to official release and
  download site (drop need for autoreconf)

- drop dependency on kernel headers >= 3.17 (should be fixed with
  commit 'v4l2: make ZBar build and run on Kernels < 3.16' (see [1]),
  fall back to original kernel headers >= 3.0 dependency propagated
  from libv4l

[1] https://git.linuxtv.org/zbar.git/commit/?id=fa5c48127ec1e3670e28540c2e6a03431ebac5b8

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/stress-ng: bump to version 0.09.55

Drop three patches (already in version)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/binutils: add support for binutils 2.32

Remove upstream ARC and Xtensa patches.
Keep all other patches from binutils 2.31.1.

See the release note:
https://sourceware.org/ml/binutils/2019-02/msg00010.html

While testing the Binutils 2.32 version bump, the Qemu xtensa
defconfig (that was using a kernel 4.16) needed to be updated with a
patch [1] from kernel 4.19 otherwise the kernel doesn't boot with
binutils 2.32 [2].

Since then, all Qemu defconfig has been updated by commit [3] to use a
4.19 kernel, so the issue no longer exists.

All other architectures has been tested using toolchain-builder [4].

[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=4119ba211bc4f1bf638f41e50b7a0f329f58aa16
[2] https://www.sourceware.org/ml/binutils/2019-02/msg00015.html
[3] fd8a02fd75d652b85f64c1cd7e9adf1ee2329261
[4] https://gitlab.com/kubu93/toolchains-builder/pipelines/45896638

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/elf2flt: bump version to fix build with binutils >= 2.32

Binutils added bfd_stdint.h to bfd.h [1], so elf2flt must create a
symlink for this header. This issue has been fixed upstream in commit
[2].

We keep our local patch
0001-ld-elf2flt-behave-properly-when-called-with-a-name-d.patch as it
still hasn't been merged upstream [3].

Fixes (with binutils 2.23):

  [armv7m-uclibc]        https://gitlab.com/kubu93/toolchains-builder/-/jobs/148356410
  [m68k-coldfire-uclibc] https://gitlab.com/kubu93/toolchains-builder/-/jobs/148356412

[1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commitdiff;h=2d5d5a8f0a8b5a03454bf168b7fa7024bb1ebbd8
[2] https://github.com/uclinux-dev/elf2flt/commit/429521f695c6f4212d809a141bfa4417b733f395
[3] https://github.com/uclinux-dev/elf2flt/pull/8

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/jpeg-turbo: bump to version 2.0.2

- Remove two patches (already in version)
- Update hash of LICENSE.md, clarifications on BSD and zlib were added:
  https://github.com/libjpeg-turbo/libjpeg-turbo/commit/90e2d7f3fdbfbc00afc2d21c4a5b61eebcd3c849

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libcdio-paranoia: bump to version 10.2+2.0.0

Add LIBCDIO_PARANOIA_SOURCE to download a tar.bz2 (tar.gz is not
available for this version)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/wpewebkit: fix host gcc >= 4.8 check

We need host gcc >= 4.8 not host gcc < 4.8.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Acked-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: James Hilliard &lt;<a href="mailto:james.hilliard1@gmail.com" target="_blank">james.hilliard1@gmail.com</a>&gt;<br></blockquote><div><br></div><div><span class="gmail-m_4107183884095209747gmail-il"><span class="gmail-il">Acked</span></span>-by: Francois Perrad &lt;<a href="mailto:francois.perrad@gadz.org" target="_blank">francois.perrad@gadz.org</a>&gt;</div><div> <br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libdrm: amdgpu needs MMU

amdgpu test uses fork() so disable amdgpu without MMU

Fixes:
 - http://autobuild.buildroot.org/results/8d6194982c1080e173fcef8212fb06e6dc275d58

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/bird: bump to version 2.0.4

Signed-off-by: Adrien Gallouët <adrien@gallouet.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/go: set GOCACHE to a host path

Set the GOCACHE environment variable properly.

It was previously unset, and defaults to $HOME/.cache/go-build.

Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

docs/manual: document new behaviour of 'make printvars'

Add a 'VARS=...' setting to the example. To make it clear that several
variables can be specified, use two variables in the first example.
Only 2 variables are printed, so the ... is removed.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Makefile: printvars: don't print anything when VARS is not set

Using 'make printvars' for printing all variables is not very useful.
E.g. all macros will output some bogus value. In addition, the same can
be achieved with 'make -p'.

We can simply remove the condition on $(VARS). If VARS is not set, the
filter expression will be empty which matches nothing, so nothing is
printed.

Note that the old behaviour can still be achieved with:
make printvars VARS=%

Update the 'make help' text to match the new behaviour.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/openjpeg: security bump to latest git version

Current git contains fixes for a number of post-2.3.0 security issues:

git shortlog --no-merges -i --grep cve --grep overflow --grep zero v2.3.0..
Even Rouault (2):
      Avoid out-of-bounds write overflow due to uint32 overflow computation on images with huge dimensions.
      color_apply_icc_profile: avoid potential heap buffer overflow

Hugo Lefeuvre (4):
      convertbmp: fix issues with zero bitmasks
      jp3d/jpwl convert: fix write stack buffer overflow
      jp2: convert: fix null pointer dereference
      convertbmp: detect invalid file dimensions early

Karol Babioch (2):
      jp3d: Replace sprintf() by snprintf() in volumetobin()
      opj_mj2_extract: Check provided output prefix for length

Stefan Weil (1):
      Fix some potential overflow issues (#1161)

Young_X (5):
      [MJ2] To avoid divisions by zero / undefined behaviour on shift
      [JPWL] fix CVE-2018-16375
      [JPWL] imagetotga(): fix read heap buffer overflow if numcomps < 3 (#987)
      [JPWL] opj_compress: reorder checks related to code block dimensions to avoid potential int overflow
      [JP3D] To avoid divisions by zero / undefined behaviour on shift (CVE-2018-14423

ichlubna (1):
      openjp3d: Int overflow fixed (#1159)

setharnold (1):
      fix unchecked integer multiplication overflow

Drop now upstreamed 0004-install-static-lib.patch.

Add a hash for the LICENSE file.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/btrfs-progs: bump to version 4.20.2

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/minetest: bump to version 5.0.0

"5.0.0 is a breaking release and not compatible to the 0.4 series", so
update minetest-game package in the same commit.

Update GCC dependency to 4.9+.

Use LICENSE.txt as license file instead of the README.md.

Update license files hash for minetest-game after checking what's changed.
Add new license files for minetest-game.

https://forum.minetest.net/viewtopic.php?t=22278

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gnupg2: bump to version 2.2.13

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libgpg-error: bump to version 1.35

Release 1.34 added riscv32 support.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mosquitto: bump version to 1.5.8

Bugfix release, fixing a number of issues discovered post-1.5.7

https://mosquitto.org/blog/2019/02/version-1-5-8-released/

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/lpeg: bump to version 1.0.2

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/iproute2: bump to version 4.20.0

Drop upstream patch. Renumber the remaining patch.

Add upstream patch fixing build with musl libc.

Cc: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/php: security bump to version 7.3.3

php-7.3.3 fixes a number of security issues (no CVE known, bugtracker issues
not yet public): https://secure.php.net/ChangeLog-7.php#7.3.3

Drop 0004-OPcache-flock-mechanism-is-obviously-linux-so-force-.patch as the
flock detection has been removed since commit 9222702633 (Avoid dependency
on "struct flock" fields order.)

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

ntp: security bump to version 4.2.8p13

Fixes CVE-2019-8936: Crafted null dereference attack in authenticated
mode 6 packet.

Drop upstream patches.

Update COPYRIGHT file hash; text formatting (line width) changes.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/file: security bump to version 5.36

CVE-2019-8906: do_core_note in readelf.c in libmagic.a in file 5.35 has
an out-of-bounds read because memcpy is misused.

CVE-2019-8904: do_bid_note in readelf.c in libmagic.a in file 5.35 has a
stack-based buffer over-read, related to file_printf and file_vprintf.

Update license files hashes; removal of trailing white spaces.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/mongodb: disable on powerpc64

As stated in SConstruct, the altivec runtime test breaks
cross-compilation: "This checks for an altivec optimization we use in
full text search. Different versions of gcc appear to put output bytes
in different parts of the output vector produced by vec_vbpermq.  This
configure check looks to see which format the compiler produces. NOTE:
This breaks cross compiles, as it relies on checking runtime
functionality for the environment we're in."

Fixes:
 - http://autobuild.buildroot.org/results/162198617979a83b66f70ed6013251942ed04d67

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/wireshark: add optional spandsp dependency

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/cracklib: bump to version 2.9.7

- Remove first two patches (already in version)
 - Add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/czmq: use --without-docs

Use --without-docs option instead of setting
ac_cv_prog_czmq_have_asciidoc=no

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/czmq: remove uneeded werror patch

Remove patch and use --disable-Werror to disable -Werror

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/sqlcipher: fix static build

Fixes:
 - http://autobuild.buildroot.org/results/ebd8678a56a7dd8679fd4ec3ca1385c04866cc88

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ncmpc: requires gcc >= 6

Following reply from upstream on build failure with gcc 5
(https://github.com/MusicPlayerDaemon/ncmpc/pull/47), enforce gcc >= 6

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

Revert "package/ncmpc: fix build with gcc 5"

This reverts commit 56c476db99b764c6a1f64a64e0295e96f8a4612f.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/cryptopp: don't build cryptest.exe

Replace install target by install-lib target to avoid building and
installing cryptest.exe

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/tpm2-abrmd: rename libsapi to libtss2-sys in the help text

libsapi was renamed to libtss2-sys in tpm2-tss library:
https://github.com/tpm2-software/tpm2-tss/commit/5f0ab55d4e46077cb8f0c53a76c5ebd15a088d26

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/tpm2-tss: rename tpm2-tss libraries in the help text

Since tpm2-tss version 2.0.0, tpm2 libraries have been renamed.

libsapi renamed to libtss2-sys
https://github.com/tpm2-software/tpm2-tss/commit/5f0ab55d4e46077cb8f0c53a76c5ebd15a088d26

libtcti-device renamed to libtss2-tcti-device
libtcti-socket renamed to libtss2-tcti-mssim
https://github.com/tpm2-software/tpm2-tss/commit/b8584accbd96e38eaea250e31ed3ea580d2bca27

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/xen: fix build with gcc 8.1

Fixes:
 - http://autobuild.buildroot.org/results/df5abe6ca8b4c8935f3d5c257aef816190771200

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gnuradio: add optional log4cpp dependency

Currently, logger component is enabled if log4cpp is found

Moreover, it should be noted that log4cpp is now mandatory in latest
upstream:
https://github.com/gnuradio/gnuradio/commit/d2428961205bf62e6b39966f040f98435e5cc2ed

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/openldap: bump to version 2.4.47

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/reaver: bump to version 1.6.5

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mongodb: needs host-python2

mongodb (like gnuradio) needs host-python2 however there is no way to
enforce this so add a dependency on !BR2_PACKAGE_PYTHON3.
Indeed, if BR2_PACKAGE_PYTHON3 is selected, then buildroot will only
build and install host-python-typing for host-python3.

This issue was not raised in the previous version of mongodb as
host-scons was the only dependency however we now have
host-python-typing and host-python-pyyaml dependencies and it
does not seem right to enforce python2 on those packages

Fixes:
 - http://autobuild.buildroot.org/results/693bdba2c01a1b69f56d6ee75094a6a0fc3f40b4

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: propagate dependency to Config.in comment]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ncmpc: fix build with gcc 5

Fixes:
 - http://autobuild.buildroot.org/results/655eb4905c6e308d34293658acee4fc4e1fe0bbc

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ncmpc: remove first patch

This patch has been rejected by upstream however the issue has been
fixed by a different approach since version 0.31 and
https://github.com/MusicPlayerDaemon/ncmpc/commit/029523c8a2472e45213e50c1e3eb414245dd9d57

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/cryptopp: bump to version 8.1.0

- Remove patch (already in version)
- Add BSD-3-Clause (CRYPTOGAMS) and Public domain (ChaCha SSE2 and  AVX)
  to LICENSE, see:
  https://github.com/weidai11/cryptopp/commit/64a89bf352c7eb8ec905b4bf6d1177a56fed0121

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/sqlcipher: bump to version 4.0.1

Remove three patches (already in version)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

board/freescale/common/imx: fix imx8-bootloader-prepare for i.MX8M

The update of imx-mkimage in commit
c14d92d439062caa6c94c4a93b20ab18aa20554c

broke the imx8-bootloader-prepare.sh script for i.MX8M, used in
freescale_imx8mqevk_defconfig

The updated mkimage_fit_atf.sh script in imx-mkimage now needs
a ATF_LOAD_ADDR variable, which was set to 0x00910000 for i.MX8M.

Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/wireshark: fix build with uclibc

Fixes:
 - http://autobuild.buildroot.org/results/c41d42fe3489bc63c42e7ce7a9eccb1b4ca7b9b2

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/flashrom: add BR2_PACKAGE_FLASHROM_ARCH_SUPPORTS

Fixes:
 - http://autobuild.buildroot.org/results/22c72369cd5b7a8200bb03564bdc342ed026ccac
 - http://autobuild.buildroot.org/results/ef6869bc40382145fad1079b79107275c4973494
 - http://autobuild.buildroot.org/results/09d857102c469ede1db0bff8aa0dcd82a4001eaf

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: change formatting of new option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/dmidecode: bump to version 3.2

Add hash for license file

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/log4cplus: add optional qt5 dependency

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: test BR2_PACKAGE_QT5BASE instead of BR2_PACKAGE_QT5, just for
consistency with the package we add to the DEPENDENCIES variable.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/stella: bump version to 6.0

- add hashes for license files
- remove patch with changes already upstream [1]

[1] https://github.com/stella-emu/stella/commit/483013baa7b357fdf0daa2e510c537d460132584

Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/unixodbc: bump to version 2.3.7

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ccid: bump to version 1.4.30

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/sunxi-tools: fix build meminfo with musl

musl does not provide inx/outx API for ARM arch, so use
io memory access via pointers which is actually done this
way in glibc/ulibc.

Fixes:
    http://autobuild.buildroot.net/results/bf10cbe40c0f672c34db72e4eea4c168d5932bd4/

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

qt5webkit: select leveldb package and memenv

This patch fixes the build issue reported by autobuilder [0].

        /home/naourr/work/instance-2/output/build/qt5webkit-5.9.1/Source/WebCore//.obj/platform/leveldb/LevelDBDatabase.o: In function
`WebCore::LevelDBDatabase::openInMemory(WebCore::LevelDBComparator const*)':
LevelDBDatabase.cpp.text._ZN7WebCore15LevelDBDatabase12openInMemoryEPKNS_17LevelDBComparatorE+0x34): undefined reference to `leveldb::NewMemEnv(leveldb::Env*)'
        collect2: error: ld returned 1 exit status
        make[3]: *** [Makefile.api:97: ../lib/libQt5WebKit.so.5.9.1]
Error 1

The issue happens when both packages leveldb and qt5webkit are enabled.

QtWebKit builds its own copy of leveldb [1] (as a third-party) if the
system does not provided it (i.e. buildroot). It builds it differently
and this is the origin of that issue. Instead of using the Makefile
provided by leveldb [2], QtWebKit uses qmake to build that library [3].

The missing symbol issue happens because the symbol leveldb::NewMemEnv
is bundled in the static library libmemenv.a (aside libleveldb.so).
This static library consists of this single symbol which is like an
extra that is built but *NOT* shipped by default at installation in the
staging directory. Unfortunatly, that symbol is required later by
WebCore [4].

The copy built by QtWebKit is an all-in-one library including both
libleveldb and libmemenv; thus QtWebKit links against libleveldb only.
Also, the linker finds the buildroot's copy first (not the third-party):
that explains why it is complaining about a missing symbol. That copy
does not have the symbol leveldb::NewMemEnv.

Fortunatly, QtWebKit provides a facility to link against the system
leveldb package. The qmake flag WEBKIT_CONFIG+=use_system_leveldb tells
Qt5WebKit to link against libleveldb *AND* libmemenv [5].

To fix that issue, this commit selects the package leveldb that now
installs the libmemenv static library and its header. It ensures that
QtWebKit has everything it needs to be built. It also sets the
appropriate qmake configure flags to tell QtWebKit to use the leveldb
copy built by buildroot instead of the bundled one.

[0]: http://autobuild.buildroot.net/results/46033e82adf592c3b92c6d50cfaf45bd58beeaa4
[1]: https://github.com/qt/qtwebkit/tree/5.9/Source/ThirdParty/leveldb
[2]: https://github.com/qt/qtwebkit/blob/5.9/Source/ThirdParty/leveldb/Makefile#L167-L169
[3]: https://github.com/qt/qtwebkit/blob/5.9/Source/ThirdParty/leveldb/Target.pri#L80
[4]: https://github.com/qt/qtwebkit/blob/5.9/Source/WebCore/platform/leveldb/LevelDBDatabase.cpp#L185
[5]: https://github.com/qt/qtwebkit/blob/5.9/Source/WebCore/WebCore.pri#L254
[6]: https://github.com/google/leveldb/commit/739c25100e46576cdcdfff2d6f43f9f7008103c7

Signed-off-by: Gaël PORTAY <gael.portay@collabora.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

leveldb: generate pic for static libraries

The project's static libraries are not compiled with the -fPIC compiler
flag. This prevents dynamic libraries to link against those libraries.

This commit adds a patch that sets the -fPIC compiler flag to the list of
CFLAGS/CXXFLAGS.

The project now generates position independant code for all of its
outputs (i.e. not limited anymore to its shared libraries).

Fixes:

/home/gportay/src/buildroot/output/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-amd-linux-gnu/6.2.0/../../../../x86_64-amd-linux-gnu/bin/ld: /home/gportay/src/buildroot/output/host/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libmemenv.a(memenv.o): relocation R_X86_64_32S against `.rodata' can not be used when making a shared object; recompile with -fPIC
/home/gportay/src/buildroot/output/host/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libmemenv.a: error adding symbols: Bad value
collect2: error: ld returned 1 exit status

Signed-off-by: Gaël PORTAY <gael.portay@collabora.com>
[Arnout: renumber patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

leveldb: install memenv static library and header

The project builds a tiny static library that consists of a single
symbol which creates an in-memory LevelDB database.

That library is not installed by default and may be used by other
projects.

This commit installs in the staging directory the libmemenv.a static
library and the memenv.h header file.

Signed-off-by: Gaël PORTAY <gael.portay@collabora.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/gst-plugins-bad: remove apexsink support

apexsink does not build with OpenSSL 1.1.x so remove this option
especially because there is no more apexsink option in gstreamer1 (since
version 1.12)

Fixes:
 - http://autobuild.buildroot.org/results/a29e8a8509190fc4b3c419dae2301cf72a601f62

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/optee-*: packages depend on thread support

BR2_PACKAGE_OPTEE_CLIENT depends on BR2_TOOLCHAIN_HAS_THREADS.
Library teec uses pthread support to protect clients state management.

This change declares this dependency in package optee-client and
updates dependent packages accordingly: optee-benchmark, optee-client,
optee-examples and optee-test.

Fixes [1] and [2] where config selected an toolchain without thread
support and build failed with trace like:

  CMake Error at /home/buildroot/autobuild/run/instance-1/output/host/share/cmake-3.8/Modules/FindPackageHandleStandardArgs.cmake:137 (message):
    Could NOT find Threads (missing: Threads_FOUND)
  Call Stack (most recent call first):
    /home/buildroot/autobuild/run/instance-1/output/host/share/cmake-3.8/Modules/FindPackageHandleStandardArgs.cmake:377 (_FPHSA_FAILURE_MESSAGE)
    /home/buildroot/autobuild/run/instance-1/output/host/share/cmake-3.8/Modules/FindThreads.cmake:212 (FIND_PACKAGE_HANDLE_STANDARD_ARGS)
    libteec/CMakeLists.txt:8 (find_package)

[1] http://autobuild.buildroot.net/results/ed6ffe2197da4f3a970bd3c5522291236396cc8e
[2] http://autobuild.buildroot.net/results/406f90048db097580b626ef889823132f8676ba1

Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas: fix dependencies of Config.in comment, as noticed by Baruch.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/vsftpd: add patch to fix hang

This fixes a hang due to SIGCHLD not being handled correctly by
vsftpd. The patch comes from fedora and didn't make its way to
upstream yet.

More information about the bug can be found in:
 - https://bugzilla.redhat.com/show_bug.cgi?id=1198259

Signed-off-by: Abdelmalek Benelouezzane <abdelmalek.benelouezzane@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/wireshark: security bump to version 2.6.7

Fixes CVE-2019-9208, CVE-2019-9209 and CVE-2019-9214

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gst-plugins-bad: allow static build of zbar plugin

zbar can be built statically since commit
fc4a6abfa6bbffeabefb9967dbf378c410fb6318 so remove the dynamic library
dependency from BR2_PACKAGE_GST_PLUGINS_BAD_ZBAR

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/busybox: udhcp CVE-2019-5747 patch

Patch to resolve CVE-2019-5747 which affects versions prior
to 1.30.0

More information can be found at:
https://nvd.nist.gov/vuln/detail/CVE-2019-5747

This applies to both master and 2019.02

Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/busybox: udhcp CVE-2018-20679 patch

Patch to resolve CVE-2018-20679 which affects versions prior
to 1.30.0

More information can be found at:
https://nvd.nist.gov/vuln/detail/CVE-2018-20679

This applies to both master and 2019.02

Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/dovecot-pigeonhole: bump version to 0.5.5

Release notes:
https://www.dovecot.org/list/dovecot-news/2019-March/000400.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/dovecot: bump version to 2.3.5

Release notes:
https://www.dovecot.org/list/dovecot-news/2019-March/000399.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mender: add missing double quote in service file

There was a missing double quotes that would prevent the service from
starting.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Tested-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Acked-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/imx-mkimage: add -std=c99 to CFLAGS

Fixes:
 - http://autobuild.buildroot.org/results/4c31d97a9aaf9ef887e68d64efe468c81f8cf7bc

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/efl: fix build with mesa

efl does not compile with mesa without OpenGL ES because it checks for
GL_ES_VERSION_2_0 and declares own GLintptr and GLsizeiptr types if such
version is not defined, but mesa declares them too for OpenGL version
1.5, so fix it by add check also for OpenGL 1.5 where these types are
defined.

Use patch from:
https://git.enlightenment.org/core/efl.git/commit/?id=0d2b624f1e24240a1c4e651aa1cfe9a8dd10a573

Fixes:
http://autobuild.buildroot.net/results/62ca120f1e54e8c3ae445f98b2624b526569f007

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/flashrom: fix build on riscv

Fixes:
 - http://autobuild.buildroot.org/results/fb95c22cbe1d19e73f0089103ed6da2f4b3081c8

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/flashrom: disable on microblaze and xtensa

Fixes:
 - http://autobuild.buildroot.org/results/cdf0fb462eec143ea881d43cdd0c69c86122f66b
 - http://autobuild.buildroot.org/results/df4d9702959b610762e87cf21fac9de62365dae6

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/freescale-imx/imx-sc-firmware: properly wrap help text

Fixes:
package/freescale-imx/imx-sc-firmware/Config.in:5: help text: <tab><2 spaces><62 chars>

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

docs/website: download.html: correct version number in title

Fixes #11716

Latest release is 2019.02.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/imx-mkimage: fix license file

COPYING file is now at the top level, see:
https://source.codeaurora.org/external/imx/imx-mkimage/commit/?id=4a7e6873dc9de70f61dcbdb9c15a945a2e31d272

Fixes:
 - http://autobuild.buildroot.org/results/03cffcf6959d5a6efa05b6e3c71d95d096cc942a

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/optee-examples: use the OPTEE_OS_SDK variable

The optee-os package was recently changed to provide the OPTEE_OS_SDK
to allow other packages to locate the OP-TEE Trusted Application SDK,
so let's use this new variable in the optee-examples package.

Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas: use the new variable name, rework commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/optee-test: use the OPTEE_OS_SDK variable

The optee-os package was recently changed to provide the OPTEE_OS_SDK
to allow other packages to locate the OP-TEE Trusted Application SDK,
so let's use this new variable in the optee-test package.

Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas: use the new variable name, rework commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

boot/optee-os: define a new variable OPTEE_OS_SDK

This commit adds a new variable OPTEE_OS_SDK, define by the optee-os
package, which points to the OPTEE SDK installed in STAGING_DIR. This
will allow other pakage to find this SDK more easily.

Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
[Thomas: improve commit log, rename variable to just OPTEE_OS_SDK]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/flashrom: remove x86 dependency

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>