flex: delete broken flex++ symlink from target

When flex is built for the target without installing the
flex binary, a flex++ symlink installed by flex's Makefile
points to the missing flex executable.  This mod adds
a post target install hook to remove the broken symlink.

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux: remove support of linux26-* targets

The linux-* mirror targets of linux26-* have been added a very long time ago
(2010) and linux 2.6 is now considered 'old' anyway. It no longer makes
sense to support these linux26-* targets, so this patch removes them.

This is a simplification introduced in preparation of the kconfig-package
infrastructure.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc: use $(MAKE) iso $(MAKE1) for menuconfig target

There is no real reason to run uclibc-menuconfig in non-parallel mode,
even though one can neither expect performance benefits from a parallel
menuconfig.
Nevertheless, $(MAKE) is the default, so this patch removes the unnecessary
non-default $(MAKE1) usage for uclibc-menuconfig.

This is a simplification introduced in preparation of the kconfig-package
infrastructure.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc: update-config: preserve freshly configured settings

In the sequence:

make uclibc-menuconfig
make uclibc-update-config

the freshly configured settings from the menuconfig are lost during the
update-config step. This is because update-config depends on the configure
step, which starts by copying the config file to the build directory.

Instead, stop depending on the configure step from update-config, and
introduce a new stamp file .stamp_config_fixup_done, which applies any
fixups on the .config file.
An alternative solution would be to add a call to UCLIBC_FIXUP_DOT_CONFIG to
the relevant targets instead of depending on a new stamp file. The advantage
of the stamp file, though, is that we avoid redoing the fixup unnecessarily.
Moreover, in the light of the plan to extract the kconfig-specific bits into
a separate kconfig-package infrastructure, the stamp file rules are more
easily moved into such an infrastructure, while the alternative solution
requires the package .mk file to explicitly call the FIXUP rules which may
more easily be forgotten.

No longer depending on the configure step has the added bonus that
'uclibc-update-config' no longer needs the toolchain to be available, which
makes:
    make clean uclibc-menuconfig uclibc-update-config
much faster and user-friendly.

Additionally, make sure that 'make clean uclibc-update-config' works
properly, by depending on .stamp_config_fixup_done so that the config file
is present and fixed.

Fixes bug #7154 https://bugs.busybox.net/show_bug.cgi?id=7154

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc: menuconfig: take into account initial settings from config file

When executing the sequence 'make clean uclibc-menuconfig', the configured
config file is not taken into account and one starts from the default
settings.

This patch adds an explicit target for the config file and lets the
configure and menuconfig steps depend on it, fixing the problem.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc: rename SETUP_DOT_CONFIG to FIXUP_DOT_CONFIG

In a subsequent patch, the behavior of UCLIBC_SETUP_DOT_CONFIG will change
so that it only applies fixups to the (already copied) configuration file.
This patch renames this function to UCLIBC_FIXUP_DOT_CONFIG to better match
the future behavior.

Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc: build tests after uClibc libs are installed to staging location

If libuClibc is not installed to staging on attempt to build tests following
errors happen:

============
  TEST_LINK termios/ termios
.../host/usr/arc-buildroot-linux-uclibc/sysroot/usr/lib/crt1.o: In function `__start':
.../build/uclibc/libc/sysdeps/linux/arc/crt1.S:53: undefined reference to `__uClibc_main'
termios.o: In function `main':
.../build/uclibc/test/termios/termios.c:13: undefined reference to `printf'
.../build/uclibc/test/termios/termios.c:14: undefined reference to `printf'
.../build/uclibc/test/termios/termios.c:16: undefined reference to `stdout'
.../build/uclibc/test/termios/termios.c:16: undefined reference to `fileno'
.../build/uclibc/test/termios/termios.c:16: undefined reference to `ioctl'
.../build/uclibc/test/termios/termios.c:19: undefined reference to `perror'
.../build/uclibc/test/termios/termios.c:21: undefined reference to `printf'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `memcpy'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `malloc'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `abort'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `calloc'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `dl_iterate_phdr'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `realloc'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `memset'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `strlen'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `free'
collect2: error: ld returned 1 exit status
make[3]: *** [termios] Error 1
============

And the simplest solution is to build tests right before installation in
UCLIBC_INSTALL_TARGET_CMDS which follows UCLIBC_INSTALL_STAGING_CMDS so
all required libs are in place.

Interesting note - if one enables uClibc tests after initial full buildroot
build mentioned errors don't happen. This is because uClibc libc libs are
already installed to staging. That's why I didn't noticed this problem before.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xdriver_xf86-video-intel: Bump version to 2.99.914

- enable sna module by default
- optionally enable uxa module if DRI2 support is enabled
- add support for DRI3
- dependencies for DRI1/2/3 modules are provided by xserver_xorg-server,
  therefore remove mesa3d dependency
- clean-up ums/kms options, configure picks sane defaults
- replace dependencies xproto_randrproto & xproto_renderproto with xlib_libXrandr

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xserver_xorg-server: Add support for DRI3

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

popt: now needs gettextize

Because of df9244ff3738face50605eacf4d4f15d963de915 we now need to
gettextize popt. Fixes:
http://autobuild.buildroot.net/results/6e2/6e27c98407f114df07eb5cd16a843420fdb72bf4/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python: new module cffi

Foreign Function Interface for Python calling C code.

[Thomas: add dependency on host-pkgconf and libffi, enable on Python 3
since the module builds fine and loads fine with Python 3 as well.]

Signed-off-by: oli vogt <oli.vogt.pub01@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

httping: fix math library linking

Add the math library directive '-lm' to linker options at the end.
The order of the math library directive '-lm' matters.

Fixes:

  http://autobuild.buildroot.net/results/843/84382290696e72c23995f5ed020ad5c157817012/

Signed-off-by: Yuvaraj Patil <yuvaraj.patil@wipro.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

docs/manual: add sob line for patch series

The -s is missing in the documentation when teaching how to use 'git
format-patch' to automatically add the sob line.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

luarocks: refactor with TARGET_FINALIZE_HOOKS

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl: refactor with TARGET_FINALIZE_HOOKS

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc: fix networking support on sparc

While updating the default config for Sparc, I noticed that networking
is broken. The reason is a uClibc backport patch from uClibc
master. This commit adds a fix on top of it, which was submitted to
upstream uClibc.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qemu/sparc-ss10: update defconfig to Linux 3.15.x

Update defconfig to 3.15, tested with Qemu 2.0.0.
Removed hint about framebuffer, as -display none is used.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux: bump default to version 3.15.7

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: bump 3.{3, 10, 14, 15}.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

popt: solve the glob_pattern_p() problem

The current popt build system tests the existence of <glob.h>, and
then assumes that if __GLIBC__ is defined, then glob_pattern_p() must
be available. Unfortunately, that's not true with uClibc: <glob.h> may
be installed, but not necessarily the GNU glob extensions... and
uClibc defines __GLIBC__. This is causing build issues with certain
uClibc toolchains that do not have GNU glob extensions enabled.

To fix this, we introduce a patch called popt-03-glob-detection.patch
which adds a new AC_CHECK_FUNCS() test for glob_pattern_p() and uses
the result to know if this function is available, instead of testing
__GLIBC__.

In order for this patch to work, the popt package must be
autoreconfigured, so another patch, popt-02-fix-autoreconf.patch, is
needed to make the package autoreconfigure properly. And also
POPT_AUTORECONF = YES is added to popt.mk.

Finally, this change avoids the need for the Blackfin toolchain
specific testing, which we forgot to update when introducing the
2014R1 version of the Blackfin toolchain. With this new solution,
there will be no need to update the popt.mk file when new Blackfin
toolchains are added.

Fixes:

  http://autobuild.buildroot.org/results/e09/e09e24fec240382a3197fef3e98eb9a22f76420a/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yuvaraj Patil <yuvaraj.patil@wipro.com>
Cc: Sonic Zhang <sonic.zhang@analog.com>

popt: rename patch to use the correct naming convention

This patch renames the popt patch popt-1.14_no-wchar.patch to
popt-01-no-wchar.patch in order to follow the naming convention used
in all packages.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

PPC: fix ltrace build on PPC32

Add a patch to fix the build on PPC32 platform. That patch has been
submitted upstream.

Fixes:

  http://autobuild.buildroot.org/results/446/4460aac38225289ef58a8693da9ae520ae07a226/

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

icu: fix build after custom data library patch

Commit abded6bfead49d61c24a45d811a83ca082adf677 ("icu: add an option
to add a custom data library file") broke the build because of an
improper test on a non-qstripped variable. This commit fixes that.

Fixes:

  http://autobuild.buildroot.org/results/02a/02a0800b01a4bf8734d601f79dc12663fe8f7542/
  and many other similar occurences of the same issue.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-flup: re-add MIT license

The MIT license was in the original submission, but I had removed it
since I couldn't find where it was used. It is indeed used in
flup/server/paste_factory.py as noted by the original
submitter. Therefore, this commit adds the MIT license as one of the
licenses of python-flup.

Reported-by: Oli Vogt <oli.vogt.pub01@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

flickcurl: adjust openssl dependency

flickcurl does not specifically need openssl: it needs libcurl to have
crypto support to access https:// URLs. So, instead of depending on
openssl in FLICKCURL_DEPENDENCIES, this commit simply leaves it to the
Config.in file to select either OpenSSL, gnutls or libnss to make sure
libcurl will use one of these libraries.

Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

flickcurl: remove ca-certificates as a build dependency

ca-certificates is a runtime dependency only, so selecting it in the
Config.in file is sufficient, adding it to FLICKCURL_DEPENDENCIES is
not useful.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

flickcurl: new package

We need two patches from upstream git as flickr now requires https access.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr: fix the kconfig recursive loop when selecting
 a SSL implementation]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/lftp: inverse the openssl/gnutls selection

openssl is more widely used than gnutls. Other packages prefer openssl
over gnutls and would like to do the select in the opposite direction.

So switch lftp to use openssl by default, and only revert to using
gnutls if explicitly selected by the user.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

icu: add an option to add a custom data library file

[Thomas:
 - use one single BR2_PACKAGE_ICU_CUSTOM_DATA_PATH string option
   instead of a boolean option + a string option, which always causes
   a lot of issues with random configurations that enable the boolean
   option, but do not provide a valid value for the string option.
 - enclose the definition of ICU_COPY_CUSTOM_DATA into the condition.]

Signed-off-by: Johan Derycke <johan.derycke@barco.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux: support multiple custom DTS files

[Thomas: fix minor typo in help text.]

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl: handle BR2_PREFER_STATIC_LIB

[Thomas: fix commit title, use one line for both CONF_OPT options.]

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xapp_xconsole: Needs MMU

Fixes
http://autobuild.buildroot.net/results/be8/be89847832a2588dbda8dd921edb09b2af130e03/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

postgresql: enable staging installation

Certain packages need the headers/libraries from Postgresql to build
properly.

[Thomas: slightly reword the commit message.]

Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ltris: needs MMU

This package needs MMU. Hence added dependency on BR2_USE_MMU

Fixes:
http://autobuild.buildroot.net/results/5cf/5cf2262460a72ce51b479a42fca61cea5f6e23fd//

Signed-off-by: Yuvaraj Patil <yuvaraj.patil@wipro.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl-module-build: bump to version 0.4206

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl-net-ssleay: bump to version 1.65

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl-mojolicious: bump to version 5.21

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain: add option to copy the gconv libraries

The gconv libraries are used to translate between different character sets
('charsets', even 'csets' sometimes). Some packages need them to present
text to the user (eg. XBMC Gotham).

In (e)glibc they are implemented by the internal implemenation of iconv,
called gconv, and are provided as dlopen-able libraries.

Note that some gconv modules need extra libraries (shared by more than
one gconv module), so we must, when adding a subset of modules, scan the
installed modules in search of the missing libraries.

[Thomas: add general explanation in expunge-gconv-modules and fix
coding style.]

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Eric Limpens <limpens@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5: Need pcre with UTF support

Enabling PCRE16 is not enough for Qt5. PCREUTF is also necessary, else
Qt5 may complain with this kind of (non fatal) message:
  QRegularExpressionPrivate::doMatch(): called on an invalid QRegularExpression object

Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

system: move tz setup outside of default skeleton clause

Allow time zone setup and installation for configurations
using custom skeletons as well as default skeletons.

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dropbear: bump to version 2014.64

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/fetchmail: gettextize to match the new gettext version

The gettext macros in the package are from a gettext version older than
the one we have in Buildroot, so autoreconf fails.

Run gettextize prior to running autoreconf, like we do in wget.

Fixes:
http://autobuild.buildroot.net/results/8dd/8dd6651ce99c0b81497fd285909b2b614009e273/
http://autobuild.buildroot.net/results/0bb/0bbfddda94ac7f75f74a54157c27de5b4fb3e559/
http://autobuild.buildroot.net/results/92b/92bcb493619ce4508bc4571cbfc3d5c3bdf49ff4/
http://autobuild.buildroot.net/results/768/768efd71745c72cec159edaa92e266167629ec5d/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ltrace: use current master

ltrace 0.7.3 is the latest release but it is actually broken on ARM
since PTRACE_SINGLESTEP emulation has been removed, see:

http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=425fc47adb5bb69f76285be77a09a3341a30799e

It fails with:
PTRACE_SINGLESTEP: Input/output error

Using master solves that until a new release is made.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-daemon: new package

[Thomas: adjust license information to use SPDX code for Python
license, add GPLv2+ which is used for the tests, and fix the license
file variable.]

Signed-off-by: David Bachelart <david.bachelart@bbright.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-ipython: new package

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-flup: new package

This module is useful to implement a fastCGI webserver
Tested with ARM and Python 2.7.6

[Thomas: fix license informations.]

Signed-off-by: oli vogt <oli.vogt.pub01@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

docs/manual: enhance doc for BR2_TOOLCHAIN_HEADERS_AT_LEAST_X_Y

The BR2_TOOLCHAIN_HEADERS_AT_LEAST_X_Y symbols can be used to denote the
lowest required kernel headers version, but also the highest supported
version. Document that.

Use the `...` construct instead of +...+ used eveywhere else, otherwise
asciidoc would render +<=+ to the ⇐ arrow, while `...` does no rendering
at all.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-numpy: add patch to fix build on uClibc

Fixes:

  http://autobuild.buildroot.org/results/01d/01da44bc4b644a46326d8fbd87708b7a98971487/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python3: define license and license files

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python3: optional decimal module support

This commit makes the decimal module support optional: since Python
3.3 it relies on an external library. The source code of this library
is available built-in as part of the Python sources, but in Buildroot
we generally prefer to use the external library when possible.

To achieve this, this commit adds a patch to Python that is similar to
the one we use for expat support, but this time for the
libmpdec/mpdecimal library.

As a consequence, since mpdecimal now builds properly even when
<fenv.h> is not available (on i386), this commit fixes:

  http://autobuild.buildroot.org/results/b64/b64d5c941a7cac00619da3a0696939f86a8eafc2/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mpdecimal: new package

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

luarocks: allow to work with host-luainterpreter

when we embed luajit on target,
we use luarocks with host-luajit instead of host-lua,
in order to use the same interpreter on the both side.

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

luainterpreter: add host variant

host-luainterpreter is host-lua or host-luajit

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

luajit: add host variant

the goal is to use host-luajit with pkg-luarocks
when luajit is on the selected luainterpreter for the target

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

hostapd: EAP support needs shared library support

Fixes:

  http://autobuild.buildroot.org/results/dcb/dcbdc25cd5b46917c8f740d492db7512021462fa/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gst-fsl-plugins: fix build for kernel headers >= 3.10

This package couldn't build using a toolchain with kernel headers >=
3.10 because of the use of VIDIOC_DBG_G_CHIP_IDENT. As stated in
videodev2.h, this ioctl should never be used.

Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/rtmpdump: Fix static build

Fixes
http://autobuild.buildroot.net/results/04c/04cc4f4878466715d980442bd7114fecbeb51c0b/

Quote from README:

A shared library is now built by default, in addition to the static
library. You can also turn it off if desired

  $ make SHARED=

The rtmpdump programs still link to the static library, regardless.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/fetchmail: Fix checking for statically build OpenSSL with libz dependency

Fixes
http://autobuild.buildroot.net/results/48a/48ad6d3659cf1f04581b7e3d115bebf454ff17fd/

To fix the error add "-lz" to LIBS variable and re-order the libraries in
configure.ac. Please note line 797 in configure.ac:
dnl XXX FIXME: use pkg-config if available!

Quote of the compile error:

configure: Enabling OpenSSL support in /home/br/br/output/host/usr/i486-buildroot-linux-uclibc/sysroot/usr.
checking for additional library dependencies of SSL... error
configure: error: cannot link with SSL - check config.log

In config.log multiple linking errors to libz can be found:

configure:10099: /home/br/br/output/host/usr/bin/i486-ctng-linux-uclibc-gcc -o
  conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64
  /home/br/br/output/host/usr/i486-buildroot-linux-uclibc/sysroot/usr/lib/libcrypto.a(c_zlib.o):
  In function `zlib_stateful_c_zlib.c:(.text+0x56): undefined reference to `inflate'

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

rdesktop: needs mmu

Fixes:
http://autobuild.buildroot.net/results/8f2/8f24a81516383feaffed485c85958e7a1c68176c/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libfslvpuwrap: fix tests of return value from IOGetVirtMem

Same as similar patches for imx-vpu, the returned value from
IOGetVirtMem was not properly checked.

[Thomas: add upstream reference to the patch, suggested by Yann
E. Morin.]

Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libpcap: fix build for uclinux target

As usual, uclinux is also linux. Also, -lpthread is needed to link the canusb
test.

Fixes:
http://autobuild.buildroot.net/results/3af/3af796bc0eaa8563f0fd1dfce090083482fa57b9/

[Thomas: fix typo in SoB line inside the newly added patch.]

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qemu/mipsel-malta: update defconfig to Linux 3.15.x

Update to 3.15.x, remove ext3 support, use ext4 as
default.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qemu/mips-malta: update defconfig to Linux 3.15.x

Update to 3.15.x, disable ext3, use ext4 as default.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qemu/mips64el-malta: update defconfig to Linux 3.15.x

Update defconfig to 3.15.x.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qemu/mips64-malta: update defconfig to Linux 3.15.x

Update default to 3.15.x.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

x11vnc: needs MMU

This package needs MMU. Hence this commit adds the dependency on
BR2_USE_MMU

Fixes:

  http://autobuild.buildroot.net/results/b9d/b9d27977a231d186fe5289232f5d3995ec756266/

Signed-off-by: Yuvaraj Patil <yuvaraj.patil@wipro.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

busybox: enable fdisk in default config

As noted by mnemoc on IRC the default busybox config doesn't enable
fdisk and util-linux is hidden by !BR2_PACKAGE_BUSYBOX_SHOW_OTHERS.
On modern systems fdisk usage is becoming more common so enable it, it
just adds up ~25 KiB to total binary size.
People who are on the edge for space savings will normally customize
their busybox config.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

php: security bump to version 5.5.15

Fixes:
CVE-2014-4670 (SPL Iterators use-after-free)

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

systemd: add hook to disable ldconfig.service

Since version 215, systemd installs a service to execute /sbin/ldconfig
when the sysinit target is reached.

Unfortunately, /sbin/ldconfig is not installed on a target built using a
glibc-based toolchain.

As this service is not mandatory, it is now disabled, thus avoiding a
warning in the journal.

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

systemd: bump to version 215

Bump systemd to version 215.

Also refresh the patch reverting the use of `ln --relative`.

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/Makefile.in: fix coding style regarding the '=' sign

As stated in the buildroot user manual add just a single space before
and after a '=' sign.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

luarocks: move the option --deps-mode

The option moves from `luarocks make` command to the LuaRocks config file.

This change and the merge of PR https://github.com/keplerproject/luarocks/pull/236
in LuaRocks 2.2.0 avoids the confusing message "Missing dependency"

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

luarocks: bump to version 2.2.0beta1

this version includes a new default repository for rocks

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain: include C libraries in legal-info

So far, the legal-info infrastructure was not exporting the legal
info for the C libraries. This is because the legal-info only acts
on packages defined in $(TARGETS).

But the C libraries are never added to $(TARGETS), since there is no
corresponding BR2_PACKAGE_<C-LIBRARY>.

This patch adds such symbols for the 4 C libraries we support in our
internal backend: uClibc, glibc, eglibc and musl.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/eudev: Update project URL in Config.in

Suggested by Arnout:
http://article.gmane.org/gmane.comp.lib.uclibc.buildroot/90060/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xlib_libXext: Bump version to 1.3.3

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/tvheadend: Bump version to current git master

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libdrm: Bump version to 2.4.55

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-pyzmq: bump to version 14.3.1

> Warning: Users of Python 3.4 should not use pyzmq < 14.3,
> due to changes in garbage collection.

Plus, there's some interesting stuff in 14.x.

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/script/scancpan: more license name ajustment

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

trivial: fix typo 'informations'

In English, unlike in French, almost all usages of the word 'information'
are uncountable, meaning that 'informations' is invalid.
This patch fixes this typo throughout the tree, except in CHANGES and
docs/news.html (historic text).

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl-net-ssleay: fix configure

CCFLAGS needs the same replacement as LDDLFAGS

see http://autobuild.buildroot.net/results/299/299d6fa6b2ccf97987ffd9c99130c25dd55ca9b4/

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

trivial: fix typo 'an host'

In English, unlike in French, the 'h' in 'host' is pronounced, meaning that
the article should be 'a' instead of 'an'.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gnupg2: fix dependency on libpthsem

Commit beb49d882e03d4596d40dafad21e50460a6f1ef0 ('gnupg2: new
package') was incorrect in its dependency on libpthsem: it was
selecting BR2_PACKAGE_PTHSEM while it should select
BR2_PACKAGE_LIBPTHSEM. This commit fixes that.

Fixes:

  http://autobuild.buildroot.org/results/6e0/6e02b42f01986a56c22c44658fa1e488c0a08e7c/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

pkg-autotools: add support for <pkg>_AUTORECONF_ENV

This commit improves the autotools-package infrastructure to support a
<pkg>_AUTORECONF_ENV variable, which allows a package maintainer to
pass additional variables in the environment of the autoreconf
execution. This is useful in the situation where configure.ac contains
shell commands using environment variables that are only executed when
autoreconf is run.

Signed-off-by: Rick Taylor <rick.taylor@cassidian.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

grub2: add a tip to create disk image w/o root permission

[Thomas: minor fixes/improvements.]

Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

system/skeleton: remove spurious group 'nobody'

We define the two groups 'nobody' and 'nogroup' in our skeleton, but
they have the same gid, which is not valid.

This breaks the mkuser script, as noticed by Thomas.

Anyway, the user 'nobody' belongs to the group 'nogroup' in any sane
distribution.

So, just remove the spurious 'nobody' group.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

legal-info: Add site to legal info manifest

I would like to propose adding the site to the legal-info manifest
files. This gives a little more information on where the sources came
from without adding much overhead. Please note that is is only for
packages where the source is not local or set with OVERRIDE_SRCDIR.

Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gnupg: make gnupg and gnupg2 mutually exclusive

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Markos Chandras <Markos.Chandras@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gnupg2: new package

[Thomas: use libpthsem instead of pth, remove !uclibc dependency,
minor formatting fixes in the .mk file.]

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Markos Chandras <Markos.Chandras@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libpthsem: add libpth compatibility option

This commit adds the BR2_PACKAGE_LIBPTHSEM_COMPAT option to the
libpthsem package, in order to enable the compatibility with the pth
library, which is useful to support gnupg2.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xbmc: Fix TexturePacker compile

Patch description:

use_texturepacker_native=yes

is needed because we obviously need a native-compiled binary, but the xbmc
build system does enable this variable only for darwin, android and
raspberry-pi targets.

USE_TEXTUREPACKER_NATIVE_ROOT="$(HOST_DIR)/usr"

is also needed because
USE_TEXTUREPACKER_NATIVE_ROOT="$TEXTUREPACKER_NATIVE_ROOT"
is only executed for raspberry-pi by xbmc/configure and only
USE_TEXTUREPACKER_NATIVE_ROOT is used by tools/TexturePacker/Makefile.in.

To sum up, building for raspberry-pi and other archs works out-of-the-box,
compiling for an Intel target, for example, fails:

In file included from SDL_anigif.cpp:23:0:
SDL_anigif.h:24:21: fatal error: SDL/SDL.h: No such file or directory
compilation terminated.
XBMCTex.cpp:34:21: fatal error: SDL/SDL.h: No such file or directory

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xbmc: Add lame support

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xbmc: Add alsa support

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xbmc: Allow compilation with uClibc

- Add dependencies needed by xbmc on BR2_LARGEFILE, BR2_INET_IPV6 &
  BR2_USE_WCHAR after the removal of BR2_TOOLCHAIN_USES_GLIBC
- Add xbmc-0002-mathutil.patch to fix ARM compilation

[Thomas: factorize architecture dependency in a new
BR2_PACKAGE_XBMC_ARCH_SUPPORTS option.]

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

xbmc: Bump version to 13.2b2

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libva: needs shared library support

Fixes:

  http://autobuild.buildroot.org/results/565/5655d1ee3f3b7503187d2e131d239cdde86683fb/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Bernd Kuhls <bernd.kuhls@t-online.de>

linux-headers: bump 3.12.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

rpi-userland: add missing library in .pc file

Fixes:
  http://autobuild.buildroot.net/results/8df/8dfb6cba6ea27af253b391cdd355a456382f17a4/

Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gnutls: bump to version 3.2.16

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>