x86: fold two JMP templates

Now that the AMD64 check in match_template() applies to 64-bit code
only, the non-64-bit and the Amd64 template can be folded, as being
otherwise compatible with one another. (Oddly enough the same doesn't
apply to CALL, due to the suffixes it permits, while JMP doesn't
allow for any.)

x86-64: Intel64 adjustments for insns dealing with far pointers

AMD and Intel differ in their handling of far indirect branches as well
as LFS/LGS/LSS: AMD CPUs ignore REX.W while Intel ones honors it. (Note
how the latter three were hybrids so far, while far branches were fully
AMD-like.)

Disable gdbserver on host != target configurations

Correct fallout from commit 919adfe84092 ("Move gdbserver to top level")
and revert to not building `gdbserver' in a cross-configuration, that is
where host != target, matching the documented behaviour.  We have no way
to support non-native `gdbserver', and native `gdbserver' is usually of
no use with cross-GDB of the chosen host.

gdbserver/ChangeLog:
2020-02-12  Maciej W. Rozycki <macro@wdc.com>
    Pedro Alves  <palves@redhat.com>

Skip building gdbserver in a cross-configuration.
* configure.srv: Set $gdbserver_host depending on whether $target
is $host.  Use $gdbserver_host instead of $host.

[gdb] Fix -Wstrict-null-sentinel warning (--with-iconv-bin)

When using configure flag --with-iconv-bin=$(which iconv), we run into:
...
gdb/charset.c: In function 'void find_charset_names()':
gdb/charset.c:821:75: error: missing sentinel in function call [-Werror=format=]
     iconv_program = concat (iconv_dir.c_str(), SLASH_STRING, "iconv", NULL);
                                                                           ^
cc1plus: all warnings being treated as errors
...

Fix the warning.

Build and reg-tested on x86_64-linux.

2020-02-12  Lukas Durfina  <ldurfina@tachyum.com>
    Tom de Vries  <tdevries@suse.de>

* charset.c (find_charset_names): Cast concat NULL sentinel to char *.

x86: also disallow non-byte/-word registers with byte/word suffix

Along the lines of be4c5e58bd ("x86: Always disallow double word suffix
with word general register") also adjust check_{byte,word}_reg(), to make
overall behavior consistent again in this regard.

x86/Intel: improve diagnostics

The diagnostics issued by check_*_reg() are pretty AT&T-centric. Re-use
logic already used for SIMD memory operand size checking also for ones
where GPRs would alternatively also be allowed. (There's certainly room
for further improvement here.)

Update a comment in psymtab.h

This updates a comment in psymtab.h to reflect the current reality.

gdb/ChangeLog
2020-02-11  Tom Tromey  <tom@tromey.com>

* psymtab.h: Update comment.

Change-Id: I438bb5929c3ebd1a4c6e9a902490f2ef63014ab3

Don't allow copying of auto_obstack

Add DISABLE_COPY_AND_ASSIGN to struct auto_obstack, to prevent copying
it.  Copying an auto_obstack would be a bug.

2020-02-11  Tom Tromey  <tom@tromey.com>

* gdb_obstack.h (struct auto_obstack): Use
DISABLE_COPY_AND_ASSIGN.

Change-Id: Ic9e5ab20acfcfa61c241fed4d99bbb1caefba3cd

Don't forward-declare struct objfile in dwarf2/frame.h

dwarf2/frame.h forward-declares struct objfile, but there's no need
for this.

gdb/ChangeLog
2020-02-11  Tom Tromey  <tom@tromey.com>

* dwarf2/frame.h (struct objfile): Don't forward declare.

Change-Id: I4d54d46ac9422eeb64dc5f0b934792e77a875aa5

Automatic date update in version.in

Plugin: Treat each object as independent

Since plugin treats each object as independent, we must do a fresh dlopen
of plugin for each object.

PR binutils/25355
* plugin.c (try_claim): Always clean up for LTO wrapper.
(try_load_plugin): Treat each object as independent.  Create a
copy for plugin name.

Remove use of deprecated_add_core_fns in cris_tdep.c

The non-deprecated equivalent is implementing the gdbarch function
iterate_over_regset_sections, this patch does that.

Tested by generating a core file on cris under qemu and comparing
the output of "info registers".

This also fixes this warning when loading cris core files:
  warning: Unexpected size of section `.reg/164' in core file.

gdb/ChangeLog:

2020-02-11  Christian Biesinger  <cbiesinger@google.com>

* cris-tdep.c (cris_supply_gregset): Change signature to match
what struct regset expects.
(cris_regset): New struct.
(fetch_core_registers): Remove.
(cris_iterate_over_regset_sections): New function.
(_initialize_cris_tdep): Don't call deprecated_add_core_fns.
(cris_gdbarch_init): Call set_gdbarch_iterate_over_regset_sections.

Change-Id: Ieef895b5a2fdc797d1a913cd1c0c07563edfe8e7

New testcase for PR tui/25126 (staled source cache)

I'm dealing with a Fedora GDB bug that is related to PR tui/25126, and
I thought I'd write a specific testcase for it because I couldn't find
one.

The idea is to get the simple reproducer from the bug and tweak the
testcase around it.  This one was a bit hard because, since we need to
modify the source file and recompile it, it involved a bit of TCL-foo
to do things.  Also for this reason, I'm only enabling the test for
native boards.

I tested this with an upstream GDB and made sure everything is
passing.  I also tested with a faulty GDB and made sure the test
failed.

gdb/testsuite/ChangeLog:
2020-02-11  Sergio Durigan Junior  <sergiodj@redhat.com>

PR tui/25126
https://bugzilla.redhat.com/show_bug.cgi?id=1784210
* gdb.base/cached-source-file.c: New file.
* gdb.base/cached-source-file.exp: New file.

Change-Id: Ib1b074342ebe8613c6d1dfde631691ebdf6d81c6

Add a comment for the ARM_F{0..7}_REGNUM registers

These are for the obsolete FPA architecture.

gdb/ChangeLog:

2020-02-11  Christian Biesinger  <cbiesinger@google.com>

* arch/arm.h (enum gdb_regnum): Add comment for the FP0..7
registers.

Change-Id: I6920616318ee637493d4ca12b91fa2ebcd103d76

Add missing \n in fprintf

gdb/ChangeLog:

2020-02-11  Christian Biesinger  <cbiesinger@google.com>

* arm-tdep.c (arm_dump_tdep): Add \n in fprintf.

Change-Id: I0175572436cc7dec29e852c96371f85ea763ba2a

Re-generate gdb/gdbserver/gdbsupport configure scripts

In my previous commit, I did a last minute modification of warning.m4,
but forgot to re-generate the configure scripts, this commit fixes that.

gdb/ChangeLog:

* configure: Re-generate.

gdbserver/ChangeLog:

* configure: Re-generate.

gdbsupport/ChangeLog:

* configure: Re-generate.

Add -Wstrict-null-sentinel to gdbsupport/warning.m4

Commit 85f0dd3ce ("[gdb] Fix -Wstrict-null-sentinel warnings") fixed
some violations of -Wstrict-null-sentinel.  If we want to enforce this
warning, I think we should enable it in our warning.m4 file.

gdbsupport/ChangeLog:

* warning.m4: Add -Wstrict-null-sentinel.
* configure: Re-generate.

gdbserver/ChangeLog:

* configure: Re-generate.

gdb/ChangeLog:

* configure: Re-generate.

Move gdb/warning.m4 to gdbsupport

This file is used by gdbsupport, gdbserver and gdb, so I think it
belongs in gdbsupport.  Move it there and update the references the
various acinclude.m4 files.

gdbsupport/ChangeLog:

* warning.m4: Move here, from gdb/warning.m4.
* acinclude.m4: Update warning.m4 path.
* Makefile.in: Re-generate.

gdbserver/ChangeLog:

* acinclude.m4: Update warning.m4 path.

gdb/ChangeLog:

* acinclude: Update warning.m4 path.
* warning.m4: Move to gdbsupport.

gdbsupport: use AM_GDB_WARNINGS

Since gdbsupport has been given its own build system, it is no longer
compiled with the warning flags specified in gdb/warning.m4.

This patch makes it use AM_GDB_WARNINGS.

gdbsupport/ChangeLog:

* acinclude.m4: Include ../gdb/warning.m4.
* configure.ac: Use AM_GDB_WARNINGS.
* Makefile.am: Set AM_CFLAGS to WARN_CFLAGS and WERROR_CFLAGS.
* Makefile.in: Re-generate.
* configure: Re-generate.

Remove some ui_file_* functions

This removes ui_file_isatty, ui_file_read, ui_file_write,
ui_file_write_async_safe, ui_file_flush, and ui_file_puts, replacing
them with calls to the appropriate method instead.

gdb/ChangeLog
2020-02-11  Tom Tromey  <tromey@adacore.com>

* remote.c (remote_console_output): Update.
* printcmd.c (printf_command): Update.
* event-loop.c (gdb_wait_for_event): Update.
* linux-nat.c (sigchld_handler): Update.
* remote-sim.c (gdb_os_write_stdout): Update.
(gdb_os_flush_stdout): Update.
(gdb_os_flush_stderr): Update.
(gdb_os_write_stderr): Update.
* exceptions.c (print_exception): Update.
* remote-fileio.c (remote_fileio_func_read): Update.
(remote_fileio_func_write): Update.
* tui/tui.c (tui_enable): Update.
* tui/tui-interp.c (tui_interp::init): Update.
* utils.c (init_page_info): Update.
(putchar_unfiltered, fputc_unfiltered): Update.
(gdb_flush): Update.
(emit_style_escape): Update.
(flush_wrap_buffer, fputs_maybe_filtered): Update.
* ui-file.c (ui_file_isatty, ui_file_read, ui_file_write)
(ui_file_write_async_safe, ui_file_flush, ui_file_puts): Remove.
(stderr_file::write): Update.
(stderr_file::puts): Update.
* ui-file.h (ui_file_isatty, ui_file_write)
(ui_file_write_async_safe, ui_file_read, ui_file_flush)
(ui_file_puts): Don't declare.

Change-Id: I3ca9b36e9107f6adbc41e014f5078b41d6bcec4d

Fix building the bfd/elf32-msp430.c file on a 32-bit host.

* elf32-msp430.c (msp430_final_link_relocate): Always use longs
for addresses in print statements.
(msp430_elf_relax_delete_bytes): Likewise.
(msp430_elf_relax_add_words): Likewise.
(msp430_elf_relax_section): Likewise.

Clear plugin_data memory

Clear plugin_data memory since it may be uninitialized.

* plugin.c (add_symbols): Clear plugin_data memory.

x86: drop ShortForm attribute

It is very simple to derive from other template properties, and hence
there's little point wasting storage for it.

x86: drop stray ShortForm attributes

This attribute is meaningless when there are no operands to encode.

[binutils][gas] Fix build failure with -std=c89

My previous patch introduced the use of a C99 feature.  C99 standard is
not required for gas, so this feature should be removed.

Committed as obvious.

gas/ChangeLog:

2020-02-11  Matthew Malcomson  <matthew.malcomson@arm.com>

* config/tc-arm.c (vcx_handle_register_arguments): Remove `for`
loop initial declaration.

[gdb/testsuite] Fix UNRESOLVED in gdb.server/server-kill-python.exp

The test-case gdb.server/server-kill-python.exp runs fine by itself:
...
Running src/gdb/testsuite/gdb.server/server-kill-python.exp ...

                === gdb Summary ===

nr of expected passes            3
...

But if we run f.i. gdb.server/file-transfer.exp before it, we get instead:
...
Running src/gdb/testsuite/gdb.server/server-kill-python.exp ...
ERROR: GDB process no longer exists

                === gdb Summary ===

nr of expected passes            13
nr of unresolved testcases       1
...

We can see the origin of the problem here:
...
spawn gdbserver --once localhost:2347 \
  build/gdb/testsuite/outputs/gdb.server/file-transfer/file-transfer \
  build/gdb/testsuite/outputs/gdb.server/server-kill-python/server-kill-python^M
Process build/gdb/testsuite/outputs/gdb.server/file-transfer/file-transfer
  \ created; pid = 9464^M
Listening on port 2347^M
...

The spawn of the gdbserver for the server-kill-python test-case gets as
executable argument the file-transfer binary.

This is caused by proc gdbserver_spawn attempting to load the exec file in
$file_last_loaded.  This is something that is meant to load the same exec in
the gdbserver that was earlier loaded into gdb.

In this test-case however, nothing has been loaded into gdb by the test-case,
and consequently we load the file that was loaded into gdb in the previous
test-case.

Fix this by unsetting $file_last_loaded in gdb_init.

Build and reg-tested on x86_64-linux.

gdb/testsuite/ChangeLog:

2020-02-11  Tom de Vries  <tdevries@suse.de>

PR testsuite/25488
* lib/gdb.exp (gdb_init): Unset $file_last_loaded.

Change-Id: Ic385e08cbd34cbf85518720cf5695b4ff6619f4b

Use GCC LTO wrapper to get real symbols from LTO IR objects

GCC LTO wrapper is needed to extract real symbols from LTO IR objects.
This patch does the following:

1. Set up GCC LTO wrapper for each LTO IR object.
2. Run GCC LTO wrapper to get the real object.
3. Extract symbol info from the real object.
4. Cleanup afterwards.

bfd/

PR binutils/25355
* configure.ac (HAVE_EXECUTABLE_SUFFIX): New AC_DEFINE.
(EXECUTABLE_SUFFIX): Likewise.
* config.in: Regenerated.
* configure: Likewise.
* plugin.c (bfd_plugin_close_and_cleanup): Removed.
(plugin_list_entry): Add all_symbols_read, cleanup_handler,
gcc, lto_wrapper, resolution_file, resolution_option, gcc_env,
real_bfd, real_nsyms, real_syms, lto_nsyms and lto_syms.
(get_lto_wrapper): New.
(setup_lto_wrapper_env): Likewise.
(current_plugin): Likewise.
(register_all_symbols_read): Likewise.
(register_cleanup): Likewise.
(get_symbols): Likewise.
(add_input_file): Likewise.
(bfd_plugin_close_and_cleanup): Likewise.
(claim_file): Removed.
(register_claim_file): Set current_plugin->claim_file.
(add_symbols): Make a copy of LTO symbols.  Set lto_nsyms and
lto_syms in current_plugin.
(try_claim): Use current_plugin->claim_file.  Call LTO plugin
all_symbols_read handler.  Copy real symbols to plugin_data.
Call LTO plugin cleanup handler.  Clean up for LTO wrapper.
(try_load_plugin): Don't reuse the previous plugin for LTO
wrapper.  Set up GCC LTO wrapper if possible.  Don't set
plugin_list_iter->claim_file.
(bfd_plugin_canonicalize_symtab): Use real LTO symbols if
possible.
* plugin.h (plugin_data_struct): Add real_bfd, real_nsyms and
real_syms.

ld/

PR binutils/25355
* testsuite/ld-plugin/lto.exp: Run PR binutils/25355 test.
* testsuite/ld-plugin/pr25355.c: New file.
* testsuite/ld-plugin/pr25355.d: Likewise.
* testsuite/lib/ld-lib.exp (run_cc_link_tests): Support compile
only dump.

Ensure *valuep always written by extract_normal return

* cgen-ibld.in (extract_normal): Set *valuep on all return paths.
* bpf-ibld.c, * epiphany-ibld.c, * fr30-ibld.c, * frv-ibld.c,
* ip2k-ibld.c, * iq2000-ibld.c, * lm32-ibld.c, * m32c-ibld.c,
* m32r-ibld.c, * mep-ibld.c, * mt-ibld.c, * or1k-ibld.c,
* xc16x-ibld.c, * xstormy16-ibld.c: Regenerate.

Automatic date update in version.in

MSP430: Enable relaxation of jump instructions to hard-coded pcrel offsets

This patch fixes execution failures which occur when the BR in a
sequence such as:
  J<cond> 1f
  BR
  1:
is relaxed to a JMP, and the pc-relative offset for the destination of
the J<cond> instruction is hard-coded to be 2 words ahead of the
instruction.
The hard-coded offset will cause execution to jump 1 word ahead of where
it should actually go.

Instead we now detect the hard-coded offset is one we inserted earlier,
and invert the condition, allowing us to remove the BR entirely.

bfd/ChangeLog:

2020-02-10  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

* elf32-msp430.c (msp430_elf_relax_section): Before relaxing a branch,
check if previous instruction matches a conditional jump inserted
earlier. Invert conditional jump and delete branch in this case.

MSP430: Enable relaxation of relocs in JMP instructions

This patch fixes relocation overflows caused by an inability to relax
unconditional JMP instructions to BR instructions.

bfd/ChangeLog:

2020-02-10  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

* elf32-msp430.c (msp430_elf_relax_add_two_words): Rename to
msp430_elf_relax_add_words. Support insertion of either one or two
words.
(msp430_elf_relax_section): Catch opcode of 0x3c00 when relocation
needs to be grown. Handle insertion of branch instruction to replace
jump.

MSP430: Add printf statements to assist with debugging during relaxation

bfd/ChangeLog:

2020-02-10  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

* elf32-msp430.c (msp430_final_link_relocate): Add printf statements for
debugging relocations.
(msp430_elf_relax_delete_bytes): Likewise.
(msp430_elf_relax_add_two_words): Likewise.
(msp430_elf_relax_section): Likewise.

[binutils][arm] Implement Custom Datapath Extensions for MVE

Here we implement the custom datapath extensions for MVE.

This required the following changes:

- Adding a new register argument type (that takes either an MVE vector or
  a Neon S or D register).
- Adding two new immediate operands types (0-127 and 0-4095).
- Using the Neon type machinery to distinguish between instruction
  types.  This required the introduction of new neon shapes to account
  for the coprocessor operands to these instructions.
- Adding a new disassembly character to `print_insn_cde` to handle the
  new register types.

Specification can be found at
https://developer.arm.com/docs/ddi0607/latest

Successfully regression tested on arm-none-eabi, and arm-wince-pe.

gas/ChangeLog:

2020-02-10  Matthew Malcomson  <matthew.malcomson@arm.com>

* config/tc-arm.c (NEON_MAX_TYPE_ELS): Increment to account for
instructions that can have 5 arguments.
(enum operand_parse_code): Add new operands.
(parse_operands): Account for new operands.
(S5): New macro.
(enum neon_shape_el): Introduce P suffixes for coprocessor.
(neon_select_shape): Account for P suffix.
(LOW1): Move macro to global position.
(HI4): Move macro to global position.
(vcx_assign_vec_d): New.
(vcx_assign_vec_m): New.
(vcx_assign_vec_n): New.
(enum vcx_reg_type): New.
(vcx_get_reg_type): New.
(vcx_size_pos): New.
(vcx_vec_pos): New.
(vcx_handle_shape): New.
(vcx_ensure_register_in_range): New.
(vcx_handle_register_arguments): New.
(vcx_handle_insn_block): New.
(vcx_handle_common_checks): New.
(do_vcx1): New.
(do_vcx2): New.
(do_vcx3): New.
* testsuite/gas/arm/cde-missing-fp.d: New test.
* testsuite/gas/arm/cde-missing-fp.l: New test.
* testsuite/gas/arm/cde-missing-mve.d: New test.
* testsuite/gas/arm/cde-missing-mve.l: New test.
* testsuite/gas/arm/cde-mve-or-neon.d: New test.
* testsuite/gas/arm/cde-mve-or-neon.s: New test.
* testsuite/gas/arm/cde-mve.s: New test.
* testsuite/gas/arm/cde-warnings.l:
* testsuite/gas/arm/cde-warnings.s:
* testsuite/gas/arm/cde.d:
* testsuite/gas/arm/cde.s:

opcodes/ChangeLog:

2020-02-10  Matthew Malcomson  <matthew.malcomson@arm.com>

* arm-dis.c (print_insn_cde): Define 'V' parse character.
(cde_opcodes): Add VCX* instructions.

[binutils][arm] arm support for ARMv8.m Custom Datapath Extension

This patch is part of a series that adds support for the Armv8.m
ARMv8.m Custom Datapath Extension to binutils.

This patch introduces the Custom Instructions Class 1/2/3 (Single/
Dual, Accumulator/Non-accumulator varianats) to the arm backend.

The following Custom Instructions are added: cx1, cx1a,
cx1d, cx1da, cx2, cx2a, cx2d, cx2da, cx3, cx3a, cx3d, cx3da.

Specification can be found at
https://developer.arm.com/docs/ddi0607/latest

This patch distinguishes between enabling CDE for different coprocessor
numbers by defining multiple architecture flags.  This means that the
parsing of the architecture extension flags is kept entirely in the
existing code path.

We introduce a new IT block state to indicate the behaviour of these
instructions.  This new state allows being used in an IT block or
outside an IT block, but does not allow the instruction to be used
inside a VPT block.
We need this since the CX*A instruction versions can be used in IT
blocks, but they aren't to have the conditional suffixes on them.  Hence
we need to mark an instruction as allowed in either position.

We also need a new flag to objdump, in order to determine whether to
disassemble an instruction as CDE related or not.

Successfully regression tested on arm-none-eabi, and arm-wince-pe.

gas/ChangeLog:

2020-02-10  Stam Markianos-Wright  <stam.markianos-wright@arm.com>
    Matthew Malcomson  <matthew.malcomson@arm.com>

* config/tc-arm.c (arm_ext_cde*): New feature sets for each
CDE coprocessor that can be enabled.
(enum pred_instruction_type): New pred type.
(BAD_NO_VPT): New error message.
(BAD_CDE): New error message.
(BAD_CDE_COPROC): New error message.
(enum operand_parse_code): Add new immediate operands.
(parse_operands): Account for new immediate operands.
(check_cde_operand): New.
(cde_coproc_enabled): New.
(cde_coproc_pos): New.
(cde_handle_coproc): New.
(cxn_handle_predication): New.
(do_custom_instruction_1): New.
(do_custom_instruction_2): New.
(do_custom_instruction_3): New.
(do_cx1): New.
(do_cx1a): New.
(do_cx1d): New.
(do_cx1da): New.
(do_cx2): New.
(do_cx2a): New.
(do_cx2d): New.
(do_cx2da): New.
(do_cx3): New.
(do_cx3a): New.
(do_cx3d): New.
(do_cx3da): New.
(handle_pred_state): Define new IT block behaviour.
(insns): Add newn CX*{,d}{,a} instructions.
(CDE_EXTENSIONS,armv8m_main_ext_table,armv8_1m_main_ext_table):
Define new cdecp extension strings.
* doc/c-arm.texi: Document new cdecp extension arguments.
* testsuite/gas/arm/cde-scalar.d: New test.
* testsuite/gas/arm/cde-scalar.s: New test.
* testsuite/gas/arm/cde-warnings.d: New test.
* testsuite/gas/arm/cde-warnings.l: New test.
* testsuite/gas/arm/cde-warnings.s: New test.
* testsuite/gas/arm/cde.d: New test.
* testsuite/gas/arm/cde.s: New test.

include/ChangeLog:

2020-02-10  Stam Markianos-Wright  <stam.markianos-wright@arm.com>
    Matthew Malcomson  <matthew.malcomson@arm.com>

* opcode/arm.h (ARM_EXT2_CDE): New extension macro.
(ARM_EXT2_CDE0): New extension macro.
(ARM_EXT2_CDE1): New extension macro.
(ARM_EXT2_CDE2): New extension macro.
(ARM_EXT2_CDE3): New extension macro.
(ARM_EXT2_CDE4): New extension macro.
(ARM_EXT2_CDE5): New extension macro.
(ARM_EXT2_CDE6): New extension macro.
(ARM_EXT2_CDE7): New extension macro.

opcodes/ChangeLog:

2020-02-10  Stam Markianos-Wright  <stam.markianos-wright@arm.com>
    Matthew Malcomson  <matthew.malcomson@arm.com>

* arm-dis.c (struct cdeopcode32): New.
(CDE_OPCODE): New macro.
(cde_opcodes): New disassembly table.
(regnames): New option to table.
(cde_coprocs): New global variable.
(print_insn_cde): New
(print_insn_thumb32): Use print_insn_cde.
(parse_arm_disassembler_options): Parse coprocN args.

x86: Accept Intel64 only instruction by default

Commit d835a58baae720 disabled sysenter/sysenter in 64-bit mode by
default.  By default, assembler should accept common, Intel64 only
and AMD64 ISAs since there are no conflicts.

gas/

PR gas/25516
* config/tc-i386.c (intel64): Renamed to ...
(isa64): This.
(match_template): Accept Intel64 only instruction by default.
(i386_displacement): Updated.
(md_parse_option): Updated.
* c-i386.texi: Update -mamd64/-mintel64 documentation.
* testsuite/gas/i386/i386.exp: Run x86-64-sysenter.  Pass
-mamd64 to x86-64-sysenter-amd.
* testsuite/gas/i386/x86-64-sysenter.d: New file.

opcodes/

PR gas/25516
* i386-gen.c (opcode_modifiers): Replace AMD64 and Intel64
with ISA64.
* i386-opc.h (AMD64): Removed.
(Intel64): Likewose.
(AMD64): New.
(INTEL64): Likewise.
(INTEL64ONLY): Likewise.
(i386_opcode_modifier): Replace amd64 and intel64 with isa64.
* i386-opc.tbl (Amd64): New.
(Intel64): Likewise.
(Intel64Only): Likewise.
Replace AMD64 with Amd64.  Update sysenter/sysenter with
Cpu64 and Intel64Only.  Remove AMD64 from sysenter/sysenter.
* i386-tbl.h: Regenerated.

Allow objcopy's --set-section-flags options to add or remove the SHF_EXCLUDE flag of ELF sections.

* objcopy.c (parse_flags): Handle "exclude".
* doc/binutils.texi: Document the support.

More debuginfod tests fixes.

Start server before setting environment variable.
Specify tmpdir as the location of the server's
database.
Check additional server metrics at start-up.

Fix potential problem with binutils debuginfod tests.

* binutils/testsuite/binutils-all/debuginfod.exp:
Replace set ::env with setenv.

[gdb] Fix -Wstrict-null-sentinel warnings

When passed in CXXFLAGS, -Wstrict-null-sentinel triggers twice in a
gdb/gdbserver build.

Fix the two occurrences.

Build and reg-tested on x86_64-linux.

gdb/ChangeLog:

2020-02-10  Tom de Vries  <tdevries@suse.de>

* dwarf2/read.c (process_psymtab_comp_unit_reader): Cast concat NULL
sentinel to char *.

gdbsupport/ChangeLog:

2020-02-10  Tom de Vries  <tdevries@suse.de>

* environ.c (gdb_environ::set): Cast concat NULL sentinel to char *.

[gdb/testsuite] Skip multi-target.exp without gdbserver

Pre-commit 919adfe840 "Move gdbserver to top level", if we build gdb with
--disable-gdbserver, and run test-case gdb.multi/multi-target.exp, we run
into:
...
(gdb) PASS: gdb.multi/multi-target.exp: continue: non-stop=off: set remote-exec file in inferior 2
spawn of  --once --multi localhost:2346 failed
ERROR: tcl error sourcing /data/gdb_versions/devel/src/gdb/testsuite/gdb.multi/multi-target.exp.
ERROR: Timeout waiting for gdbserver response.
...

Fix this by using skip_gdbserver_tests in multi-target.exp.

Tested on x86_64-linux.

gdb/testsuite/ChangeLog:

2020-02-10  Tom de Vries  <tdevries@suse.de>

* gdb.multi/multi-target.exp: Skip if skip_gdbserver_tests.

GDB/testsuite: Fix a catastrophic step-over-no-symbols.exp failure

Fix a catastrophic failure in gdb.base/step-over-no-symbols.exp where
remote target communication issues cause the value of the PC retrieved
to be empty:

(gdb) FAIL: gdb.base/step-over-no-symbols.exp: displaced=off: stepi
p /x $pc
Remote 'g' packet reply is too long (expected 264 bytes, got 532 bytes): 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
(gdb) FAIL: gdb.base/step-over-no-symbols.exp: displaced=off: get after PC
ERROR: tcl error sourcing .../gdb/testsuite/gdb.base/step-over-no-symbols.exp.
ERROR: missing operand at _@_
in expression " _@_!= "
    (parsing expression " != ")
    invoked from within
"expr $before_addr != $after_addr"
    ("uplevel" body line 1)
    invoked from within
"uplevel 1 expr $condition"
    (procedure "gdb_assert" line 6)
    invoked from within
"gdb_assert {$before_addr != $after_addr} "advanced""
    (procedure "test_step_over" line 36)
    invoked from within
"test_step_over $displaced"
    ("uplevel" body line 2)
    invoked from within
"uplevel 1 $body"
    invoked from within
"with_test_prefix "displaced=$displaced" {
test_step_over $displaced
    }"
    ("foreach" body line 6)
    invoked from within
"foreach displaced { "off" "on" "auto" } {
    if { $displaced != "off" && ![support_displaced_stepping] } {
continue
    }

    with_test_prefix "dis..."
    (file ".../gdb/testsuite/gdb.base/step-over-no-symbols.exp" line 84)
    invoked from within
"source .../gdb/testsuite/gdb.base/step-over-no-symbols.exp"
    ("uplevel" body line 1)
    invoked from within
"uplevel #0 source .../gdb/testsuite/gdb.base/step-over-no-symbols.exp"
    invoked from within
"catch "uplevel #0 source $test_file_name""
Remote debugging from host xxx.xxx.xxx.xxx, port 47130
monitor exit
Killing process(es): 1092
Remote communication error.  Target disconnected.: Connection reset by peer.
(gdb)

To do so verify first, before making an arithmetic comparison, that the
values to compare are actually integers (using a string comparison would
result in a false PASS if both operands were empty, as in this case),
making the test script proceed normally:

(gdb) FAIL: gdb.base/step-over-no-symbols.exp: displaced=off: stepi
p /x $pc
Remote 'g' packet reply is too long (expected 264 bytes, got 532 bytes): 00000000000000002a6f61551500000080faffff3f0000000028010000000000b03857551500000060ad5f5515000000906e615515000000802401000000000090faffff3f00000000000000000000000100000000000000e8fbffff3f000000f8fbffff3f0000000000000000000000b8faffff3f0000008a05010000000000589c6f5515000000424d40435c2f7c7c1809575515000000f0e0baaa2a0000000000000000000000f0ffbaaa2a000000f0e0baaa2a0000006804baaa2a000000000000000000000000000000000000007053baaa2a0000008252b2aa2a00000090fe01000000000048e056551500000004000000000000004000000000000000920501000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000xxxxxxxxxxxxxxxx00000000
(gdb) FAIL: gdb.base/step-over-no-symbols.exp: displaced=off: get after PC
FAIL: gdb.base/step-over-no-symbols.exp: displaced=off: advanced
Remote debugging from host xxx.xxx.xxx.xxx, port 48404
monitor exit
Killing process(es): 1795
Remote communication error.  Target disconnected.: Connection reset by peer.
(gdb)

Note the double curly braces, to take advantage of `&&' operator's lazy
evaluation.

gdb/testsuite/
* gdb.base/step-over-no-symbols.exp: Verify that $before_addr
and $after_addr are both integers before making a comparison.

gas: error for section type, attr, or entsize change

* config/obj-elf.c (obj_elf_change_section): Error for section
type, attr or entsize changes in assembly.
* testsuite/gas/elf/elf.exp: Pass -Z to gas for section5 test.
* testsuite/gas/elf/section5.l: Update.

gas -Z flag

-Z is supposed to "generate object file even after errors".  It
doesn't do so at the moment, unless you count a zero length object
file as useful output.  Fixed for most targets as follows.
I suspect avr and pru need target patches.

* output-file.c (output_file_close): Do a normal close when
flag_always_generate_output.
* write.c (write_object_file): Don't stop output when
flag_always_generate_output.

z80 comments in archures.c

bfd-in2.h didn't match what was in archures.c and reloc.c.  This
fixes overlong comment lines and regenerates bfd-in2.h.

* archures.c: Wrap overlong z80 comments.
* bfd-in2.h: Regenerate.

Automatic date update in version.in

[gdb] Mention CU offset for <artifical> if verbose

Say we're debugging a test-case with CUs with name "<artificial>", meaning
not originating from a single file compilation, and use the verbose setting:
...
$ gdb -iex "set verbose on" -batch cc1
Reading symbols from cc1...
Reading in symbols for <artificial>... \
  and /tmp/trunk/gcc/attribs.c... \
  ...
  and /tmp/trunk/gcc/tree-ssa-reassoc.c... \
  done.
...

From the "/tmp/trunk/gcc/attribs.c" message, it's clear which CU is loaded.  But
that's not the case for the "<artificial>" message.

The message uses the filename field of struct partial_symtab, which is
documented like this:
...
  /* Name of the source file which this partial_symtab defines,
     or if the psymtab is anonymous then a descriptive name for
     debugging purposes, or "".  It must not be NULL.  */
...

So, fix this by setting the filename field to a more descriptive name than
"<artificial>", by appending the CU offset.

This way, we print instead:
...
$ gdb -iex "set verbose on" -batch cc1
Reading symbols from cc1...
Reading in symbols for <artificial>@0x41146d9 \
  and /tmp/trunk/gcc/attribs.c... \
  ... \
  and /tmp/trunk/gcc/tree-ssa-reassoc.c... \
  done.
...

Build and reg-tested on x86_64-linux.

gdb/ChangeLog:

2020-02-09  Tom de Vries  <tdevries@suse.de>

* dwarf2read.c (process_psymtab_comp_unit_reader): Append CU offset to
filename if it matches "<artificial>".

[gdb/testsuite] Capture many-headers.exp progress and output in gdb.log

When running test-case gdb.base/many-headers.exp, we have test output on
stdout/stderr:
...
Running src/gdb/testsuite/gdb.base/many-headers.exp ...
[New LWP 759]
Core was generated by `outputs/gdb.base/many-headers/many'.
Program terminated with signal SIGSEGV, Segmentation fault.
\#0  0x0000000000400688 in ?? ()

                === gdb Summary ===

nr of expected passes            1
...

Furthermore, the only trace in gdb.log that we have of the gdb command issued
is:
...
PASS: gdb.base/many-headers.exp: read core file
...

Fix this by echoing the gdb command in gdb.log, and capturing the
command output and pasting it into gdb.log:
...
( ulimit -s 4096; \
  gdb -nw -nx -data-directory data-directory -batch -core=many-headers.core )
[New LWP 1542]
Core was generated by `many'.
Program terminated with signal SIGSEGV, Segmentation fault.
\#0  0x0000000000400688 in ?? ()
PASS: gdb.base/many-headers.exp: read core file
...

Tested on x86_64-linux.

gdb/testsuite/ChangeLog:

2020-02-09  Tom de Vries  <tdevries@suse.de>

* gdb.base/many-headers.exp: Echo gdb command to gdb.log.  Capture gdb
command output and paste it into gdb.log.  If any, paste catch message
to gdb.log.

Use enums for human-readable exception information.

Changes to $_siginfo type to this:

(gdb) pt $_siginfo
type = struct EXCEPTION_RECORD {
    enum ExceptionCode ExceptionCode;
    DWORD ExceptionFlags;
    struct EXCEPTION_RECORD *ExceptionRecord;
    PVOID ExceptionAddress;
    DWORD NumberParameters;
    union {
        ULONG_PTR ExceptionInformation[15];
        struct {...} AccessViolationInformation;
    };
}
(gdb) pt $_siginfo.ExceptionCode
type = enum ExceptionCode {FATAL_APP_EXIT = 1073741845,
    DBG_CONTROL_C = 1073807365, DBG_CONTROL_BREAK = 1073807368,
    DATATYPE_MISALIGNMENT = 2147483650, BREAKPOINT, SINGLE_STEP,
    ACCESS_VIOLATION = 3221225477, IN_PAGE_ERROR,
    ILLEGAL_INSTRUCTION = 3221225501, NONCONTINUABLE_EXCEPTION = 3221225509,
    INVALID_DISPOSITION, ARRAY_BOUNDS_EXCEEDED = 3221225612,
    FLOAT_DENORMAL_OPERAND, FLOAT_DIVIDE_BY_ZERO, FLOAT_INEXACT_RESULT,
    FLOAT_INVALID_OPERATION, FLOAT_OVERFLOW, FLOAT_STACK_CHECK,
    FLOAT_UNDERFLOW, INTEGER_DIVIDE_BY_ZERO, INTEGER_OVERFLOW,
    PRIV_INSTRUCTION, STACK_OVERFLOW = 3221225725, FAST_FAIL = 3221226505}
(gdb) pt $_siginfo.AccessViolationInformation
type = struct {
    enum ViolationType Type;
    PVOID Address;
}
(gdb) pt $_siginfo.AccessViolationInformation.Type
type = enum ViolationType {READ_ACCESS_VIOLATION, WRITE_ACCESS_VIOLATION,
    DATA_EXECUTION_PREVENTION_VIOLATION = 8}

Which makes it easier to understand the reason of the exception:

(gdb) p $_siginfo
$1 = {
  ExceptionCode = ACCESS_VIOLATION,
  ExceptionFlags = 0,
  ExceptionRecord = 0x0,
  ExceptionAddress = 0x401632 <main+18>,
  NumberParameters = 2,
  {
    ExceptionInformation = {1, 291, 0 <repeats 13 times>},
    AccessViolationInformation = {
      Type = WRITE_ACCESS_VIOLATION,
      Address = 0x123
    }
  }
}

gdb/ChangeLog:

2020-02-09  Hannes Domani  <ssbssa@yahoo.de>

* windows-tdep.c (struct enum_value_name): New struct.
(create_enum): New function.
(windows_get_siginfo_type): Create and use enum types.

Display ExceptionRecord for $_siginfo

Uses the $_siginfo convenience variable to show the last exception.

The type looks like this:

(gdb) pt $_siginfo
type = struct EXCEPTION_RECORD {
    DWORD ExceptionCode;
    DWORD ExceptionFlags;
    struct EXCEPTION_RECORD *ExceptionRecord;
    PVOID ExceptionAddress;
    DWORD NumberParameters;
    ULONG_PTR ExceptionInformation[15];
}

EXCEPTION_RECORD is documented at [1].

Example:

Program received signal SIGSEGV, Segmentation fault.
main () at crasher.c:4
4         *(int*)0x123 = 0;
(gdb) p $_siginfo
$1 = {
  ExceptionCode = 3221225477,
  ExceptionFlags = 0,
  ExceptionRecord = 0x0,
  ExceptionAddress = 0x401632 <main+18>,
  NumberParameters = 2,
  ExceptionInformation = {1, 291, 0 <repeats 13 times>}
}
(gdb) p/x $_siginfo.ExceptionCode
$2 = 0xc0000005
(gdb) p/x $_siginfo.ExceptionInformation[1]
$3 = 0x123

And 0xc0000005 is the value of EXCEPTION_ACCESS_VIOLATION.

[1] https://docs.microsoft.com/en-us/windows/win32/api/winnt/ns-winnt-exception_record

gdb/ChangeLog:

2020-02-09  Hannes Domani  <ssbssa@yahoo.de>

* NEWS: Mention $_siginfo support for Windows.
* windows-nat.c (handle_exception): Set siginfo_er.
(windows_nat_target::mourn_inferior): Reset siginfo_er.
(windows_xfer_siginfo): New function.
(windows_nat_target::xfer_partial): Call windows_xfer_siginfo.
* windows-tdep.c (struct windows_gdbarch_data): New struct.
(init_windows_gdbarch_data): New function.
(get_windows_gdbarch_data): New function.
(windows_get_siginfo_type): New function.
(windows_init_abi): Register windows_get_siginfo_type.
(_initialize_windows_tdep): Register init_windows_gdbarch_data.

gdbserver/ChangeLog:

2020-02-09  Hannes Domani  <ssbssa@yahoo.de>

* win32-low.c (win32_clear_inferiors): Reset siginfo_er.
(handle_exception): Set siginfo_er.
(win32_xfer_siginfo): New function.

Automatic date update in version.in

Remove "keep" parameter from cutu_reader constructor

cutu_reader has a "keep" parameter, which is used to decide what to do
with a new CU when the reader is destroyed.  Most code does not try to
preserve the CU, so this patch removes this parameter and instead adds
a new method that users can call to preserve the CU on the chain.

gdb/ChangeLog
2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (class cutu_reader) <cutu_reader,
init_tu_and_read_dwo_dies>: Remove "keep" parameter.
<keep>: Declare method.
<m_keep>: Remove member.
<~cutu_reader>: Remove.
(cutu_reader::init_tu_and_read_dwo_dies): Update.
(cutu_reader::cutu_reader): Update.
(cutu_reader::keep): Rename from ~cutu_reader.
(process_psymtab_comp_unit, build_type_psymtabs_1)
(process_skeletonless_type_unit, load_partial_comp_unit)
(load_full_comp_unit, dwarf2_read_addr_index)
(read_signatured_type): Update.

Change-Id: I859b1c64313569d76d46317c14e9b077ebc3a27b

Simplify "want_partial_unit" handling

This changes the "want_partial_unit" parameters to have type bool, and
also removes the parameter from process_psymtab_comp_unit_reader.
This latter change seemed like an improvement, because it avoids a
pointless function call in the case where we are not planning to read
a partial unit.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (process_psymtab_comp_unit_reader): Remove
"want_partial_unit" parameter.
(process_psymtab_comp_unit): Change want_partial_unit to bool.
Inline check for DW_TAG_partial_unit.
(dwarf2_build_psymtabs_hard, scan_partial_symbols): Update.

Change-Id: I99e647f0c4faa3346e90a6e7bacc82af57eccff1

Move two more functions to dwarf2/leb.h

This moves read_n_bytes and read_direct_string to be with the the
low-level value-reading code.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (read_n_bytes, read_direct_string): Move to
read.c.
* dwarf2/leb.h (read_n_bytes, read_direct_string): Move from
read.c.

Change-Id: Id07bfa13d93c0ac1f47a385749a8f01f4755b818

Convert read_address to a method on comp_unit_head

This changes read_address to be a method on comp_unit_head.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (read_address): Move to comp-unit.c.
(dwarf2_rnglists_process, dwarf2_ranges_process)
(read_attribute_value, dwarf_decode_lines_1)
(var_decode_location, decode_locdesc): Update.
* dwarf2/comp-unit.c (comp_unit_head::read_address): Move from
read.c.  Remove "cu" parameter.
* dwarf2/comp-unit.h (struct comp_unit_head) <read_address>: New
method.

Change-Id: Ibd6c7235f2e4d5fd88c272cfd2c3d3328618cc56

Convert read_offset to method on comp_unit_head

This changes one of the read_offset overloads to be a method on
comp_unit_head.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (read_attribute_value, read_indirect_string)
(read_indirect_line_string): Update.
* dwarf2/comp-unit.c (read_offset): Remove.
(read_comp_unit_head): Update.
* dwarf2/comp-unit.h (struct comp_unit_head) <read_offset>: New
method.
(read_offset): Don't declare.

Change-Id: Ia595702a5748337b7c031352bc437956baab9990

Create dwarf2/comp-unit.[ch]

This creates the new files dwarf2/comp-unit.[ch], moving
comp_unit_head and helpers to those files.  A couple of functions are
turned into methods, because it was convenient to do so now.

2020-02-08  Tom Tromey  <tom@tromey.com>

* Makefile.in (COMMON_SFILES): Add dwarf2/comp-unit.c.
* dwarf2/read.c (struct comp_unit_head): Move to
dwarf2/comp-unit.h.
(enum class rcuh_kind): Move to comp-unit.h.
(get_cu_length, offset_in_cu_p): Now methods on comp_unit_head.
(read_comp_unit_head, error_check_comp_unit_head)
(read_and_check_comp_unit_head): Move to comp-unit.c.
(read_offset, dwarf_unit_type_name): Likewise.
(create_debug_type_hash_table, read_cutu_die_from_dwo)
(cutu_reader::cutu_reader, read_call_site_scope)
(find_partial_die, follow_die_offset): Update.
* dwarf2/comp-unit.h: New file, from dwarf2read.c.

Change-Id: Id961b9674c0081ed061083c8152c38b27b27388a

Move read_offset_1 to leb.c

This moves read_offset_1 to leb.c, as it is a low-level data-reading
function.  It is also renamed to remove the "_1", because gdb can use
overloading now, and this is clearer.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (read_offset_1): Move to leb.c.
(read_abbrev_offset, read_offset, dwarf_decode_line_header)
(dwarf_decode_macro_bytes): Update.
* dwarf2/leb.c (read_offset): Rename; move from read.c.
* dwarf2/leb.h (read_offset): Declare.

Change-Id: I048140598acfa76eade2cc529ab7933d4b9ca0b3

Convert dwarf2_section_size to a method

This changes dwarf2_section_size to be a method on
dwarf2_section_info.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (dwarf2_section_size): Remove.
(error_check_comp_unit_head, dwarf2_symbol_mark_computed):
Update.
* dwarf2/section.h (struct dwarf2_section_info) <get_size>: New method.

Change-Id: I12928fee5c84350ce98883e329357b86888d639b

Unify read_initial_length implementations

There are two implementations of read_initial_length in gdb.  This
merges them and moves the resulting function to leb.c.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (read_initial_length): Move to leb.c.
* dwarf2/leb.h (read_initial_length): Declare.
* dwarf2/leb.c (read_initial_length): Move from read.c.  Add
handle_nonstd parameter.
* dwarf2/frame.c (read_initial_length): Remove.
(decode_frame_entry_1): Update.

Change-Id: I34d37bad0f8a584bfa781432cba25e05e1bd5750

Add some methods to dwarf2_per_cu_data

This changes a few helper functions to be methods on
dwarf2_per_cu_data.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/loc.c (dwarf2_find_location_expression)
(dwarf_evaluate_loc_desc::get_tls_address)
(dwarf_evaluate_loc_desc::push_dwarf_reg_entry_value)
(rw_pieced_value, dwarf2_evaluate_loc_desc_full)
(dwarf2_locexpr_baton_eval, dwarf2_evaluate_property)
(dwarf2_compile_property_to_c)
(dwarf2_loc_desc_get_symbol_read_needs)
(dwarf2_compile_expr_to_ax, locexpr_describe_location)
(locexpr_tracepoint_var_ref, locexpr_generate_c_location)
(loclist_describe_location, loclist_tracepoint_var_ref)
(loclist_generate_c_location): Update.
* compile/compile-loc2c.c (do_compile_dwarf_expr_to_c): Update.
* dwarf2/loc.h (dwarf2_per_cu_objfile, dwarf2_per_cu_addr_size)
(dwarf2_per_cu_ref_addr_size, dwarf2_per_cu_offset_size)
(dwarf2_per_cu_text_offset, dwarf2_version): Don't declare.
* dwarf2/read.c (dwarf2_per_cu_data::objfile)
(dwarf2_per_cu_data::addr_size)
(dwarf2_per_cu_data::ref_addr_size)
(dwarf2_per_cu_data::text_offset)
(dwarf2_per_cu_data::addr_type): Now methods.
(per_cu_header_read_in): Make per_cu "const".
(dwarf2_version): Remove.
(dwarf2_per_cu_data::int_type): Now a method.
(dwarf2_per_cu_data::_addr_sized_int_type): Likewise.
(set_die_type, read_array_type, read_subrange_index_type)
(read_tag_string_type, read_subrange_type): Update.
* dwarf2/read.h (struct dwarf2_per_cu_data) <addr_size,
offset_size, ref_addr_size, text_offset, addr_type, version,
objfile, int_type, addr_sized_int_type>: Declare methods.

Change-Id: I07a42fa26e00795352389fa7a0cc1c12997d26f7

Move dwarf2_per_cu_data::imported_symtabs earlier

This moves dwarf2_per_cu_data::imported_symtabs earlier, near where
the other data members are located.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.h (struct dwarf2_per_cu_data) <imported_symtabs>:
Move earlier.

Change-Id: I314ddaa6f67c53a848e513b3f6d42913bd957833

Move DWARF line_header to new file

This moves the line_header class to a pair of new files, making
dwarf2/read.c somewhat smaller.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.h (dwarf_line_debug): Declare.
* Makefile.in (COMMON_SFILES): Add dwarf2/line-header.c.
* dwarf2/read.c: Move line_header code to new files.
(dwarf_line_debug): No longer static.
* dwarf2/line-header.c: New file.
* dwarf2/line-header.h: New file.

Change-Id: I8d9d8a2398b4e888e20cc5dd68d041c28b5a06e3

Change line_table methods to return unique_xmalloc_ptr

This changes the two new line_table methods to return
unique_xmalloc_ptr.  This removes a bit of manual memory management.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (struct line_header) <file_full_name,
file_file_name>: Return unique_xmalloc_ptr.
(line_header::file_file_name): Update.
(line_header::file_full_name): Update.
(dw2_get_file_names_reader): Update.
(macro_start_file): Update.

Change-Id: I9442dba43882fb26097d0770a291eea2b03913a4

Change file_full_name and file_file_name methods

This changes file_full_name and file_file_name methods to be methods
on line_header.  This seems more clear to me.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (struct line_header) <file_full_name,
file_file_name>: Declare methods.
(dw2_get_file_names_reader): Update.
(file_file_name): Now a method.
(file_full_name): Likewise.
(macro_start_file): Update.

Change-Id: I50d3e91665a9637c732e1e8d8e4263764c766d9c

Move dwarf_always_disassemble to dwarf2/loc.c

dwarf_always_disassemble is only used in dwarf2/loc.c, so move the
definition and the command infrastructure to that file.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (dwarf_always_disassemble)
(show_dwarf_always_disassemble): Move to loc.c.
(_initialize_dwarf2_read): Move "always-disassemble" registration
to loc.c.
* dwarf2/read.h (dwarf_always_disassemble): Don't declare.
* dwarf2/loc.c (dwarf_always_disassemble): Move from read.c.  Now
static.
(show_dwarf_always_disassemble): Move from read.c.
(_initialize_dwarf2loc): Move always-disassemble from read.c.

Change-Id: I33fb88112e98e583c3f4919d20e4d100f2ea0124

Change dwarf2_per_objfile::quick_file_names_table to htab_up

This changes dwarf2_per_objfile::quick_file_names_table to be an
htab_up.  This just removes a bit of manual management.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (~dwarf2_per_objfile): Update.
(create_quick_file_names_table): Return htab_up.
(dw2_get_file_names_reader, dw2_forget_cached_source_info):
Update.
* dwarf2/read.h (struct dwarf2_per_objfile)
<quick_file_names_table>: Now htab_up.

Change-Id: I4ff2fce8b8af27f4bfe01a11b97a889edfd23151

Minor simplification in abbrev_table::read

abbrev_table::read increments cur_abbrev->num_attrs in the inner loop,
but there's no need to do this, as the information is already stored
in the temporary vector.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/abbrev.c (abbrev_table::read): Simplify.

Change-Id: I765f12850ffa1c6066e884bb22c94468d1abdba4

Use htab_up in abbrev_table

This changes abbrev_table to use an htab_up rather than an ad hoc,
bucket-based hash table.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/abbrev.c (abbrev_table): Move constructor from header.
Rewrite.
(abbrev_table::add_abbrev, abbrev_table::lookup_abbrev): Rewrite.
* dwarf2/abbrev.h (struct abbrev_info) <next>: Remove.
(abbrev_table::abbrev_table): No longer inline.
(ABBREV_HASH_SIZE): Remove.
(abbrev_table::m_abbrevs): Now an htab_up.

Change-Id: Icbaa8e49501f9c43218d6a81a7e8c4d3a77d65dc

Minor cleanups in abbrev_table

This cleans up the DWARF abbrev_table API a bit, primarily by making
various methods and members private.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (read_cutu_die_from_dwo): Update.
(cutu_reader): Update.
(build_type_psymtabs_1): Update.
* dwarf2/abbrev.c (abbrev_table::read): Rename.
(abbrev_table::alloc_abbrev): Update.
* dwarf2/abbrev.h (abbrev_table_up): Move earlier.
(abbrev_table::read): New static method, renamed from
abbrev_table_read_table.
(abbrev_table::alloc_abbrev)
(abbrev_table::add_abbrev): Now private.
(abbrev_table::abbrev_table): Now private.
(abbrev_table::m_abbrev_obstack): Now private.  Rename.

Change-Id: I320dca83b799f672909ae66f73b7aca266adbaf9

Change dwarf2_per_objfile::die_type_hash to htab_up

This changes dwarf2_per_objfile::die_type_hash to be an htab_up,
moving its contents off the objfile obstack.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (set_die_type, get_die_type_at_offset): Update.
* dwarf2/read.h (struct dwarf2_per_objfile) <die_type_hash>: Now
htab_up.

Change-Id: Ic651f99ebf71bf7ad2dc2880192adacf7b60964a

Change dwp_file to use htab_up

This changes dwp_file to use htab_up for the loaded_cus and loaded_tus
members.  This lets us avoid allocating the contents of these hash
tables on the objfile obstack.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (struct dwp_file) <loaded_cus, loaded_tus>: Now
htab_up.
(lookup_dwo_unit_in_dwp): Update.
(allocate_dwp_loaded_cutus_table): Return htab_up.  Don't allocate
on obstack.

Change-Id: Id61209bf5c6c6faa0c067195af31fbcf26813a3a

Don't allocate DWO file hash on obstack

This changes allocate_dwo_file_hash_table so that it does not use the
objfile obstack to store the contents of the hash table.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (allocate_dwo_file_hash_table): Don't allocate on
obstack.

Change-Id: Ic20a618acc7277e56aa18580c68f75c793bef97b

Change dwarf2_per_objfile::line_header_hash to htab_up

This changes dwarf2_per_objfile::line_header_hash to be an htab_up,
and changes it to use heap allocation.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (~dwarf2_per_objfile): Don't delete
line_header_hash.
(handle_DW_AT_stmt_list): Update.  Don't allocate on obstack.
* dwarf2/read.h (struct dwarf2_per_objfile) <line_header_hash>:
Change type to htab_up.

Change-Id: Icb148a270838c0f96f38fc4a28b5b77d067927b6

Change dwarf2_per_objfile::type_unit_groups to htab_up

This changes dwarf2_per_objfile::type_unit_groups to be an htab_up,
again allowing us to move the memory used by the hash table from the
objfile obstack to the heap.

2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (allocate_type_unit_groups_table): Return
htab_up.  Don't allocate on obstack.
(get_type_unit_group, dwarf2_build_psymtabs_hard): Update.
* dwarf2/read.h (struct dwarf2_per_objfile) <type_unit_groups>:
Change type to htab_up.

Change-Id: Ia045df0ff3ec30aac813da5a9a2314a607ef7ec8

Change dwarf2_per_objfile::signatured_types to be htab_up

This changes dwarf2_per_objfile::signatured_types to be an htab_up.
This in turn lets us change it not to use the objfile obstack for
allocation; obstack allocation for hash tables is a bad practice
because it leads to excess memory use if the table is ever resized.

gdb/ChangeLog
2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.h (struct dwarf2_per_objfile) <signatured_types>:
Change type to htab_up.
* dwarf2/read.c (create_signatured_type_table_from_index)
(create_signatured_type_table_from_debug_names)
(create_all_type_units, add_type_unit)
(lookup_dwo_signatured_type, lookup_signatured_type)
(process_skeletonless_type_unit): Update.
(create_debug_type_hash_table, create_debug_types_hash_table):
Change type of types_htab.
(allocate_signatured_type_table, allocate_dwo_unit_table): Return
htab_up.  Don't allocate on obstack.
(create_cus_hash_table): Change type of cus_htab parameter.
(struct dwo_file) <cus, tus>: Now htab_up.
(lookup_dwo_signatured_type, lookup_dwo_cutu)
(process_dwo_file_for_skeletonless_type_units, lookup_dwo_cutu)
(queue_and_load_all_dwo_tus): Update.
* dwarf2/index-write.c (write_gdbindex): Update.
(write_debug_names): Update.

Change-Id: I290a209b96945fb5f415c82723b62830e9c4b467

Remove DWARF queue-related globals

This removes some queue-related globals from the DWARF reader, in
favor of a new member on dwarf2_per_objfile.  Globals must be avoided
in this code, because they prevent multi-threading the reader.

gdb/ChangeLog
2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.h (struct dwarf2_queue_item): Move from
dwarf2/read.c.  Remove "next" member.  Add constructor ntad
destructor.
(struct dwarf2_per_objfile) <queue>: New member.
* dwarf2/read.c (struct dwarf2_queue_item): Move to
dwarf2/read.h.
(dwarf2_queue, dwarf2_queue_tail): Remove.
(class dwarf2_queue_guard): Add parameter to constructor.  Use
DISABLE_COPY_AND_ASSIGN.
<m_per_objfile>: New member.
<~dwarf2_queue_guard>: Rewrite.
(dw2_do_instantiate_symtab, queue_comp_unit, process_queue):
Update.
(~dwarf2_queue_item): New.

Change-Id: Ied1f6ff3691352a66c4709b0b2cba0588f49f79a

Introduce die_info::has_children

Many functions take a "has_children" parameter (either as an in- or
out-parameter).  However, it seems to me that it makes more sense to
have "has_children" be an attribute of a DIE.  Making this change
allows this parameter to be eliminated in many places.

gdb/ChangeLog
2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/read.c (struct die_info) <has_children>: New member.
(dw2_get_file_names_reader): Remove has_children.
(dw2_get_file_names): Update.
(read_cutu_die_from_dwo): Remove has_children.
(cutu_reader::init_tu_and_read_dwo_dies)
(cutu_reader::cutu_reader): Update.
(process_psymtab_comp_unit_reader, build_type_psymtabs_reader):
Remove has_children.
(build_type_psymtabs_1, process_skeletonless_type_unit)
(load_partial_comp_unit, load_full_comp_unit): Update.
(create_dwo_cu_reader): Remove has_children.
(create_cus_hash_table, read_die_and_children): Update.
(read_full_die_1,read_full_die): Remove has_children.
(read_signatured_type): Update.
(class cutu_reader) <has_children>: Remove.

Change-Id: I0d3d51ae9379554a66032648d51124bba07f87b4

Move DWARF code to dwarf2/ subdirectory

This moves all the remaining DWARF code to the new dwarf2
subdirectory.  This is just a simple renaming, with updates to
includes as needed.

gdb/ChangeLog
2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2/expr.c: Rename from dwarf2expr.c.
* dwarf2/expr.h: Rename from dwarf2expr.h.
* dwarf2/frame-tailcall.c: Rename from dwarf2-frame-tailcall.c.
* dwarf2/frame-tailcall.h: Rename from dwarf2-frame-tailcall.h.
* dwarf2/frame.c: Rename from dwarf2-frame.c.
* dwarf2/frame.h: Rename from dwarf2-frame.h.
* dwarf2/index-cache.c: Rename from dwarf-index-cache.c.
* dwarf2/index-cache.h: Rename from dwarf-index-cache.h.
* dwarf2/index-common.c: Rename from dwarf-index-common.c.
* dwarf2/index-common.h: Rename from dwarf-index-common.h.
* dwarf2/index-write.c: Rename from dwarf-index-write.c.
* dwarf2/index-write.h: Rename from dwarf-index-write.h.
* dwarf2/loc.c: Rename from dwarf2loc.c.
* dwarf2/loc.h: Rename from dwarf2loc.h.
* dwarf2/read.c: Rename from dwarf2read.c.
* dwarf2/read.h: Rename from dwarf2read.h.
* dwarf2/abbrev.c, aarch64-tdep.c, alpha-tdep.c,
amd64-darwin-tdep.c, arc-tdep.c, arm-tdep.c, bfin-tdep.c,
compile/compile-c-symbols.c, compile/compile-cplus-symbols.c,
compile/compile-loc2c.c, cris-tdep.c, csky-tdep.c, findvar.c,
gdbtypes.c, guile/scm-type.c, h8300-tdep.c, hppa-bsd-tdep.c,
hppa-linux-tdep.c, i386-darwin-tdep.c, i386-linux-tdep.c,
i386-tdep.c, iq2000-tdep.c, m32c-tdep.c, m68hc11-tdep.c,
m68k-tdep.c, microblaze-tdep.c, mips-tdep.c, mn10300-tdep.c,
msp430-tdep.c, nds32-tdep.c, nios2-tdep.c, or1k-tdep.c,
riscv-tdep.c, rl78-tdep.c, rs6000-tdep.c, rx-tdep.c, s12z-tdep.c,
s390-tdep.c, score-tdep.c, sh-tdep.c, sparc-linux-tdep.c,
sparc-tdep.c, sparc64-linux-tdep.c, sparc64-tdep.c, tic6x-tdep.c,
tilegx-tdep.c, v850-tdep.c, xstormy16-tdep.c, xtensa-tdep.c:
Update.
* Makefile.in (COMMON_SFILES): Update.
(HFILES_NO_SRCDIR): Update.

Change-Id: Ied9ce1436cd27ac4a4cffef10ec92e396f181928

Remove die_reader_specs::comp_dir

die_reader_specs::comp_dir is assigned but never read; this patch
removes it.

gdb/ChangeLog
2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2read.c (struct die_reader_specs) <comp_dir>: Remove.
(init_cu_die_reader, read_cutu_die_from_dwo): Update.

Change-Id: I9818a2593197a6972cddec23cd2f3dd0ce28f580

Don't declare die_info in dwarf2read.h

There's no need to forward-declare struct die_info in dwarf2read.h.

gdb/ChangeLog
2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2read.h (struct die_info): Don't declare.

Change-Id: I0b8dbf99558b9547d418cfd8ef387a21f7dfa660

Remove die_info_ptr typedef

die_info_ptr is not used and so can be removed.

gdb/ChangeLog
2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2read.h (die_info_ptr): Remove typedef.

Change-Id: Ibd0a5ad55876dc96a35b658adc36348f01e48884

Change attr_form_is_block to be a method

This changes attr_form_is_block to be a method.  This is done
separately because, unlike the other attribute functions,
attr_form_is_block had special handling for the case where the
argument was NULL.  This required auditing each call site; in most
cases, NULL was already ruled out, but in a few spots, an additional
check was needed.

gdb/ChangeLog
2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2read.c (read_call_site_scope)
(handle_data_member_location, dwarf2_add_member_fn)
(mark_common_block_symbol_computed, read_common_block)
(attr_to_dynamic_prop, partial_die_info::read)
(var_decode_location, dwarf2_fetch_die_loc_sect_off)
(dwarf2_symbol_mark_computed, set_die_type): Update.
* dwarf2/attribute.h (struct attribute) <form_is_block>: Declare
method.
(attr_form_is_block): Don't declare.
* dwarf2/attribute.c (attribute::form_is_block): Now a method.

Change-Id: Idfb290c61d738301ab991666f43e0b9cf577b2ae

Change some attribute functions to be methods

This changes most of the attribute-related functions to be methods.
(attr_form_is_block changed in a subsequent patch.)

gdb/ChangeLog
2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2read.c (dwarf2_find_base_address, )
(read_call_site_scope, rust_containing_type)
(dwarf2_get_pc_bounds, dwarf2_record_block_ranges)
(handle_data_member_location, dwarf2_add_member_fn)
(get_alignment, read_structure_type, process_structure_scope)
(mark_common_block_symbol_computed, read_common_block)
(read_tag_string_type, attr_to_dynamic_prop, read_subrange_type)
(partial_die_info::read, read_attribute_value, new_symbol)
(lookup_die_type, dwarf2_get_ref_die_offset)
(dwarf2_get_attr_constant_value, follow_die_ref_or_sig)
(dwarf2_fetch_die_loc_sect_off, get_DW_AT_signature_type)
(dwarf2_symbol_mark_computed): Update.
* dwarf2/attribute.h (struct attribute) <value_as_address,
form_is_section_offset, form_is_constant, form_is_ref>: Declare
methods.
(value_as_address, attr_form_is_section_offset)
(attr_form_is_constant, attr_form_is_ref): Don't declare.
* dwarf2/attribute.c (attribute::value_as_address)
(attribute::form_is_section_offset, attribute::form_is_constant)
(attribute::form_is_ref): Now methods.

Change-Id: I320dad13002c59b848dc86c39d5d7111c8a15bdc

Create dwarf2/attribute.[ch]

This moves the attribute-related code out of dwarf2read.c and into the
new files dwarf2/attribute.[ch].

gdb/ChangeLog
2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2read.c (struct attribute, DW_STRING)
(DW_STRING_IS_CANONICAL, DW_UNSND, DW_BLOCK, DW_SND, DW_ADDR)
(DW_SIGNATURE, struct dwarf_block, attr_value_as_address)
(attr_form_is_block, attr_form_is_section_offset)
(attr_form_is_constant, attr_form_is_ref): Move.
* dwarf2/attribute.h: New file.
* dwarf2/attribute.c: New file, from dwarf2read.c.
* Makefile.in (COMMON_SFILES): Add dwarf2/attribute.c.

Change-Id: I1ea4c146256a1b9e38b66f1c605d782a14eeded7

Create dwarf2/abbrev.[ch]

This moves the abbrev table code out of dwarf2read.c and into new
files dwarf2/abbrev.[ch].

gdb/ChangeLog
2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2read.c (abbrev_table_up, struct abbrev_info)
(struct attr_abbrev, ABBREV_HASH_SIZE, struct abbrev_table):
Move.
(read_cutu_die_from_dwo, build_type_psymtabs_1): Update.
(abbrev_table::alloc_abbrev, abbrev_table::add_abbrev)
(abbrev_table::lookup_abbrev, abbrev_table_read_table): Move to
abbrev.c.
* dwarf2/abbrev.h: New file.
* dwarf2/abbrev.c: New file, from dwarf2read.c.
* Makefile.in (COMMON_SFILES): Add dwarf2/abbrev.c.

Change-Id: I87911bc5297de4407587ca849fef8e8d19136c30

Change section functions to be methods of dwarf2_section_info

This changes various section-related functions to be methods on
dwarf2_section_info.  I think this clarifies the role of these
functions.  This also changes one such function to return bool.

gdb/ChangeLog
2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2read.c (dwarf2_section_buffer_overflow_complaint)
(dwarf2_section_size, dwarf2_get_section_info)
(create_signatured_type_table_from_debug_names)
(create_addrmap_from_aranges, read_debug_names_from_section)
(get_gdb_index_contents_from_section, read_comp_unit_head)
(error_check_comp_unit_head, read_abbrev_offset)
(create_debug_type_hash_table, init_cu_die_reader)
(read_cutu_die_from_dwo, dwarf2_build_psymtabs_hard)
(read_comp_units_from_section, create_cus_hash_table)
(create_dwp_hash_table, create_dwo_unit_in_dwp_v1)
(create_dwp_v2_section, dwarf2_rnglists_process)
(dwarf2_ranges_process, read_die_and_siblings, read_full_die)
(abbrev_table_read_table, read_indirect_string_at_offset_from)
(read_indirect_string_from_dwz, read_addr_index_1)
(read_str_index, dwarf_decode_line_header, skip_form_bytes)
(dwarf_decode_macro_bytes, dwarf_decode_macros)
(fill_in_loclist_baton): Update.
* dwarf2/section.h (struct dwarf2_section_info) <get_name,
get_containing_section, get_bfd_owner, get_bfd_section,
get_file_name, get_id, get_flags, empty, read>: Declare methods.
(dwarf2_read_section, get_section_name, get_section_file_name)
(get_containing_section, get_section_bfd_owner)
(get_section_bfd_section, get_section_name, get_section_file_name)
(get_section_id, get_section_flags, dwarf2_section_empty_p): Don't
declare.
* dwarf2/section.c (dwarf2_section_info::get_containing_section)
(dwarf2_section_info::get_bfd_owner)
(dwarf2_section_info::get_bfd_section)
(dwarf2_section_info::get_name)
(dwarf2_section_info::get_file_name, dwarf2_section_info::get_id)
(dwarf2_section_info::get_flags, dwarf2_section_info::empty)
(dwarf2_section_info::read): Now methods.
* dwarf-index-write.c (class debug_names): Update.

Change-Id: Ic849f182f57a18bad6b1c7c3b9368005d307758a

Create dwarf2/section.[ch]

This moves some section-handling code from dwarf2read.c into new
files, dwarf2/section.[ch].

gdb/ChangeLog
2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2read.h (struct dwarf2_section_info, dwarf2_read_section):
Move to dwarf2/section.h.
* dwarf2read.c (get_containing_section, get_section_bfd_owner)
(get_section_bfd_section, get_section_name)
(get_section_file_name, get_section_id, get_section_flags)
(dwarf2_section_empty_p, dwarf2_read_section): Moe to
dwarf2/section.c.
* dwarf2/section.h: New file.
* dwarf2/section.c: New file, from dwarf2read.c.
* Makefile.in (COMMON_SFILES): Add dwarf2/section.c.

Change-Id: I9f8498094cf99d9521e9481622ce8adbd453daf4

Create dwarf2/leb.[ch]

This moves some scalar-unpacking code into a couple of new files,
dwarf2/leb.h and dwarf2/leb.c.

gdb/ChangeLog
2020-02-08  Tom Tromey  <tom@tromey.com>

* dwarf2read.h (read_unsigned_leb128): Don't declare.
* dwarf2read.c (read_1_byte, read_1_signed_byte, read_2_bytes)
(read_2_signed_bytes, read_3_bytes, read_4_bytes)
(read_4_signed_bytes, read_8_bytes): Move to dwarf2/leb.h.
(read_unsigned_leb128, read_signed_leb128): Move to dwarf2/leb.c.
* dwarf2/leb.h: New file, from dwarf2read.c.
* dwarf2/leb.c: New file, from dwarf2read.c.
* dwarf2-frame.c (read_1_byte, read_4_bytes, read_8_bytes):
Remove.
* Makefile.in (CONFIG_SRC_SUBDIR): Add dwarf2.
(COMMON_SFILES): Add dwarf2/leb.c.

Change-Id: Idd19647686c8f959d226a95fdfca4db47c6e96d0

Document the GDB 9.1 release in gdb/ChangeLog

gdb/ChangeLog:

GDB 9.1 released.

Automatic date update in version.in

Make fputs_unfiltered use fputs_maybe_filtered

This patch redefines fputs_unfiltered in utils.c, with new behavior to
forward parameters to fputs_maybe_filtered.  This makes
fputs_unfiltered identical to fputs_filtered, except filtering is
disabled.

Some callers of fputs_unfiltered have been updated to use ui_file_puts
where they were using other ui_file_* functions anyway for IO.

This fixes the problem I saw with \032\032post-prompt annotation being
flushed to stdout in the wrong order.

2020-02-05  Iain Buclaw  <ibuclaw@gdcproject.org>

PR gdb/25190:
        * gdb/remote-sim.c (gdb_os_write_stderr): Update.
        * gdb/remote.c (remote_console_output): Update.
        * gdb/ui-file.c (fputs_unfiltered): Rename to...
        (ui_file_puts): ...this.
        * gdb/ui-file.h (ui_file_puts): Add declaration.
        * gdb/utils.c (emit_style_escape): Update.
        (flush_wrap_buffer): Update.
        (fputs_maybe_filtered): Update.
        (fputs_unfiltered): Add function.

Change-Id: I17ed5078f71208344f2f8ab634a6518b1af6e213

Make gdb_flush also flush the wrap buffer

This changes gdb_flush to also flush the internal wrap buffer.  A few
places needed to continue using the previous approach, so this also
introduces ui_file_flush for those.

2020-02-05  Iain Buclaw  <ibuclaw@gdcproject.org>

        * gdb/event-loop.c (gdb_wait_for_event): Update.
        * gdb/printcmd.c (printf_command): Update.
        * gdb/remote-fileio.c (remote_fileio_func_write): Update.
        * gdb/remote-sim.c (gdb_os_flush_stdout): Update.
        (gdb_os_flush_stderr): Update.
        * gdb/remote.c (remote_console_output): Update.
        * gdb/ui-file.c (gdb_flush): Rename to...
        (ui_file_flush): ...this.
        (stderr_file::write): Update.
        (stderr_file::puts): Update.
        * gdb/ui-file.h (gdb_flush): Rename to...
        (ui_file_flush): ...this.
        * gdb/utils.c (gdb_flush): Add function.
        * gdb/utils.h (gdb_flush): Add declaration.

Change-Id: I7ca143d30f03dc39f218f6e880eb9bca9e15af39

Revert basenames_may_differ patch

Commit a0c1ffedc regressed certain cases coming from Eclipse.
See PR breakpoints/24915.

gdb/ChangeLog
2020-02-07  Tom Tromey  <tromey@adacore.com>

PR breakpoints/24915:
* source.c (find_and_open_source): Do not check basenames_may_differ.

gdb/testsuite/ChangeLog
2020-02-07  Tom Tromey  <tromey@adacore.com>

PR breakpoints/24915:
* gdb.base/annotate-symlink.exp: Use setup_xfail.

Change-Id: Iadbf42f35eb40c95ad32b2108ae25d8f199998bd

unique.exp: Update contains_unique_symbol

Since commit 9fc0b501af78b changed symbols from a/b to a_val/b_val,
contains_unique_symbol needs adjustment.

* testsuite/ld-unique/unique.exp (contains_unique_symbol): Updated.

Move gdbserver to top level

This patch moves gdbserver to the top level.

This patch is as close to a pure move as possible -- gdbserver still
builds its own variant of gnulib and gdbsupport.  Changing this will
be done in a separate patch.

[v2] Note that, per Simon's review comment, this patch changes the
tree so that gdbserver is not built for or1k or score.  This makes
sense, because there is apparently not actually a gdbserver port here.

[v3] This version of the patch also splits out some configury into a
new file, gdbserver/configure.host, so that the top-level configure
script can simply rely on it in order to decide whether gdbserver
should be built.

[v4] This version adds documentation and removes some unnecessary
top-level dependencies.

[v5] Update docs to mention "make all-gdbserver" and change how
top-level configure decides whether to build gdbserver, switching to a
single, shared script.

Tested by the buildbot.

ChangeLog
2020-02-07  Tom Tromey  <tom@tromey.com>
    Pedro Alves  <palves@redhat.com>

* src-release.sh (GDB_SUPPORT_DIRS): Add gdbserver.
* gdbserver: New directory, moved from gdb/gdbserver.
* configure.ac (host_tools): Add gdbserver.
Only build gdbserver on certain systems.
* Makefile.in, configure: Rebuild.
* Makefile.def (host_modules, dependencies): Add gdbserver.
* MAINTAINERS: Add gdbserver.

gdb/ChangeLog
2020-02-07  Tom Tromey  <tom@tromey.com>

* README: Update gdbserver documentation.
* gdbserver: Move to top level.
* configure.tgt (build_gdbserver): Remove.
* configure.ac: Remove --enable-gdbserver.
* configure: Rebuild.
* Makefile.in (distclean): Don't mention gdbserver.

Change-Id: I826b7565b54604711dc7a11edea0499cd51ff39e

Update release making notes.

* README-how-to-make-a-release: Add note about updating the
  GAS/NEWS URL in the next release.

Add support for the GBZ80 and Z80N variants of the Z80 architecture, and add DWARF debug info support to the Z80 assembler.

PR 25469
bfd * archures.c: Add GBZ80 and Z80N machine values.
* reloc.c: Add BFD_RELOC_Z80_16_BE.
* coff-z80.c: Add support for new reloc.
* coffcode.h: Add support for new machine values.
* cpu-z80.c: Add support for new machine names.
* elf32-z80.c: Add support for new reloc.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.

binutils* readelf.c (get_machine_flags): Add support for Z80N machine
number.

gas * config/tc-z80.c: Add -gbz80 command line option to generate code
for the GameBoy Z80.  Add support for generating DWARF.
* config/tc-z80.h: Add support for DWARF debug information
generation.
* doc/c-z80.texi: Document new command line option.
* testsuite/gas/z80/gbz80_all.d: New file.
* testsuite/gas/z80/gbz80_all.s: New file.
* testsuite/gas/z80/z80.exp: Run the new tests.
* testsuite/gas/z80/z80n_all.d: New file.
* testsuite/gas/z80/z80n_all.s: New file.
* testsuite/gas/z80/z80n_reloc.d: New file.

include * coff/internal.h (R_IMM16BE): Define.
* elf/z80.h (EF_Z80_MACH_Z80N): Define.
(R_Z80_16_BE): New reloc.

ld * emulparams/elf32z80.sh: Use z80 emulation.
* emultempl/z80.em: Make generic to both COFF and ELF Z80 emulations.
* emultempl/z80elf.em: Delete.
* testsuite/ld-elf/pr22450.d: Expect to fail for the Z80.
* testsuite/ld-elf/sec64k.exp: Fix Z80 assembly.
* testsuite/ld-unique/pr21529.s: Avoid register name conflict.
* testsuite/ld-unique/unique.s: Likewise.
* testsuite/ld-unique/unique_empty.s: Likewise.
* testsuite/ld-unique/unique_shared.s: Likewise.
* testsuite/ld-unique/unique.d: Updated expected output.
* testsuite/ld-z80/arch_z80n.d: New file.
* testsuite/ld-z80/comb_arch_z80_z80n.d: New file.
* testsuite/ld-z80/labels.s: Add more labels.
* testsuite/ld-z80/relocs.s: Add more reloc tests.
* testsuite/ld-z80/relocs_f_z80n.d: New file

opcodes * z80-dis.c: Add support for GBZ80 opcodes.

pr25022.d: Xfail more targets without ldelf_before_place_orphans

PR ld/25022
* testsuite/ld-elf/pr25022.d: Xfail more targets which don't use
ldelf_before_place_orphans.

Stop the BFD library from complaining if a segment has no sections attached to it.

PR 23932
* elf.c (rewrite_elf_program_header): Do not complain if no
sections are mapped to a segment.

Silcence a compile time warning message building the binutils with gcc-10 on an s390 host.

* dwarf.c (display_debug_lines_decoded): Force a NUL termination
of the truncated file name.