radeon/vce: cleanup cpb handling

v2: fix whitespace errors, minor coding style changes

Signed-off-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

st/mesa: improve sampler view handling

Keep a dynamically increasing array of all the views
created for a texture instead of just the last one.

v2: add comments, fix array size calculation,
    release only the first sampler view found

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

st/xa: Fix advertized version number and try to avoid future discrepancies

The xa version number had to be set in two places. In configure.ac and in
xa_tracker.h. Furthermore, xa_tracker.h is an installed header so we can't
use mesa internal defines. So therefore, at configure time, modify the
xa_tracker.h header to use the version given by configure.ac

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>

glapi: Fix make check

/me puts a paper bag on his head and sits in the corner.

This was supposed to be included in 5a68f731, which added
glPointSizePointerOES back to the list of functions exposed by
libGLESv1_CM.  It looks like it was an uncommitted change in my tree
when I sent the patch out.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

llvmpipe: remove no-op checks in sampler, sampler_view functions

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>

softpipe: remove no-op checks in sampler, sampler_view functions

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>

svga: remove no-op checks in sampler, sampler_view functions

We are checking for no-ops in the CSO module for both of these items
so there's no reason to do it in the driver.

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>

cso: check for no sampler view changes in cso_set_sampler_views()

As we do for sampler states in single_sampler_done() and many other
CSO functions.

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

docs: Add note about updating tests to dev info

Signed-off-by: Timothy Arceri <t_arceri@yahoo.com.au>

st/wgl: Remove wgl*Gallium*MESA().

These were only used by the Python state tracker, which was removed, hence
they have no practical use.

Reviewed-by: Brian Paul <brianp@vmware.com>

glapi: Fix scons build

Put the -c in the correct place (and match Makefile.am).

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76960
Tested-by: Vinson Lee <vlee@freedesktop.org>
Signed-off-by: José Fonseca <jfonseca@vmware.com>

glx: Do not advertise buffer_age on dri2

Previously GLX_EXT_buffer_age has always been advertised as supported because
both client_glx_support and client_glx_only where set. So it did not matter
that direct_support is only set when running dri3 and we ended up always
advertising it.

Fix that by not setting client_glx_only for buffer_age in known_glx_extensions.

Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

cso: fix sampler view count in cso_set_sampler_views()

We want to call pipe->set_sampler_views() with count being the
maximum of the old number of sampler views and the new number.
This makes sure we null-out any old sampler views.

We already do the same thing for sampler states in single_sampler_done().
Fixes some assertions seen in the VMware driver with XA tracker.

Cc: "10.0" "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Tested-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

glapi: Add static dispatch for glPointSizePointerOES

The OpenGL ES 1.1 conformance tests expect this function to be
statically available form libGLESv1_CM.so.  The comment "required for
es1.1" in the XML file should have been a clue.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76926
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Lu Hua <huax.lu@intel.com>

Revert "Revert "glapi/es1: Don't mark core functions as static_dispatch=false""

This reverts commit 526e49290cd2d83fb931708a786c27647972a00c.

The original build problem should be fixed by the previous commit.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Brian Paul <brianp@vmware.com>
Tested-by: Lu Hua <huax.lu@intel.com>

glapi: Enable ES compatibility mode

Ages ago Chia-I added an ES compatibility flag to several of the various
generator scripts.  The intention was to bridge differences between ES
and desktop in Mesa builds without ES.  It doesn't appear that it has
ever been used.  Recent changes to static_dispatch status of several ES1
functions caused problems in desktop-only, non-shared-glapi builds.
Enabling the ES compatibility mode appears to fix these build problems.

This is kind of a duct tape solution to this problem.  As I mentioned in
the cover letter for the series that triggered the build problem, I
would like to make some major changes to the generator architecture and
the XML.  The whole point of the proposed architecture changes is to
better handle the differences between desktop GL and ES.  I think duct
tape is okay for now.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76869
Tested-by: Brian Paul <brianp@vmware.com>
Tested-by: Lu Hua <huax.lu@intel.com>
Cc: Vinson Lee <vlee@freedesktop.org>
Cc: Chia-I Wu <olv@lunarg.com>

glapi: Fix build break in 'make check' on non-shared-glapi builds

Commit fb78fa58 made the GL_ARB_debug_output functions aliases of the
GL_KHR_debug output functions.  As a result, the function names in
struct _glapi_table also changed.  The table in check_table.cpp used the
ARB names.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>
Tested-by: Brian Paul <brianp@vmware.com>
Tested-by: Lu Hua <huax.lu@intel.com>
Cc: Vinson Lee <vlee@freedesktop.org>

glapi: Remove support for "short string" mode

C89 has a fairly short minimum-maximum string length.  To support
compilers limited by the C89 limits, this script had a mode where it
would generate a character array instead of a giant string.  These were
functionally the same, but the code generated for the character array is
HUGE and difficult to read.

As far as I can tell, nothing in Mesa uses '-m short' any more.  The
generated files used to be tracked in revision control, but I think we
stopped using '-m short' when we stopped tracking the generated files.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Brian Paul <brianp@vmware.com>
Tested-by: Lu Hua <huax.lu@intel.com>
Cc: Vinson Lee <vlee@freedesktop.org>

mesa: remove redundant running of check_symbol_table()

Nested for loops running through tables against which they
finally do an assert were ran also with optimized builds.

Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

mesa: Add missing null check in _mesa_parse_arb_program()

Add missing null check in program_parse.tab.c through
program_parse.y

Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

mesa: Prevent negative indexing on noise2, noise3 and noise4

% operator could return negative value which would cause
indexing before perm table. Change %256 to &0xff

Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

glx: add extra null check in getFBConfigs

Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

glx: remove unused __glXClientInfo()

Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

i965/vec4: do not trim dead channels on gen6 for math

Do not set a writemask on Gen6 for math instructions, those are
executed using align1 mode that does not support a destination mask.

v2: cleanups, better comment (Matt)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76883

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

winsys/svga: Replace the query mm buffer pool with a slab pool v3

This is to avoid running out of query buffer space due to winsys
limitations. Instead of a fixed size per screen pool of query buffers,
use a slab allocator that allocates a new slab if we run out of space
in the first one.

v2: Correct email addresses.
v3: s/8192/VMW_QUERY_POOL_SIZE/. Improve documentation and log message.

Reported-and-tested-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>

mesa/soft/llvmpipe: add fake MSAA support

This adds a gallium cap that allows us to fake GL3.0 by
not exposing MSAA on sw rendering.
It also forces the extra extensions needed for GL3.2.

Signed-off-by: Dave Airlie <airlied@redhat.com>

gbm: Add gbm_bo_get_fd to gbm-symbols-check script

gbm: Add import from fd

Add a new import type that lets us create a gbm bo from a
DMA-BUF file descriptor.

Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>

gbm: Add gbm_bo_get_fd()

Add gbm function to get a DMA-BUF file descriptor for a gbm bo.

Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>

include/GLES3: add OpenGL ES 3.1 Headers

From:
http://www.khronos.org/registry/gles/api/GLES3/gl31.h
http://www.khronos.org/registry/gles/api/GLES2/gl2ext.h
http://www.khronos.org/registry/gles/api/GLES3/gl3platform.h

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

Revert "glapi/es1: Don't mark core functions as static_dispatch=false"

This reverts commit f6e290f80cc6728647e9cee35546190f081197e2.

To fix the broken build.  The DRI-enabled build seems OK after reverting.
Th non-DRI/gallium build is still suffering from an unrelated issue in
the pipe-loader code.

mesa: Allow setting GL_TEXTURE_MAX_LEVEL to 0 with GL_TEXTURE_RECTANGLE.

Currently, we raise an error when doing this which breaks a conformance
test from the OpenGL samples pack. Even if this is a bit silly it is not
an error.

From http://www.opengl.org/wiki/Rectangle_Texture:

"Rectangle textures contain exactly one image; they cannot have mipmaps.
Therefore, any texture parameters that depend on LODs are irrelevant
when used with rectangle textures; attempting to set these parameters to
any value other than 0 will result in an error."

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76496

Reviewed-by: Brian Paul <brianp@vmware.com>

gallium/docs: fix silent math failures due to ~ and &

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Brian Paul <brianp@vmware.com>

gallium/docs: line up some of the equations

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Brian Paul <brianp@vmware.com>

gallium/docs: fix incorrect/missing references

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Brian Paul <brianp@vmware.com>

gallium/docs: fix use of _ in math sections

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Brian Paul <brianp@vmware.com>

gallium/docs: add format to index

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Brian Paul <brianp@vmware.com>

gallium/docs: fix a lot of bad formatting

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Brian Paul <brianp@vmware.com>

glsl: remove UBO fields from _mesa_glsl_parse_state

They are not needed since 514f8c7ec7cc1ab18be93cebb5b9bf970b1955a9.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

nv50: implement clear_buffer to accelerate ARB_clear_buffer_object

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

mesa/st: Accelerate ARB_clear_buffer_object with clear_buffer

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium: add interface to clear buffers

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mapi_abi: Remove ABI-check work arounds for functions that are no longer exported

The previous commit stopped exporting 21 libGLESv2 and 88 libGLESv1_CM
functions.  This removes the work-arounds for those functions from
ABI-check.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Acked-by: Chad Versace <chad.versace@linux.intel.com>

mapi_abi: Make ES1 and ES2 static_dispatch=false functions hidden

This has been a long standing issue with the ES libraries.  Functions
marked in the XML with 'static_dispatch=false' were still incorrectly
exported.  ABI-check is supposed to detect this case, but we have to
paper over failures every time a new extension is added.

This change will cause a big pile of functions to disappear from
libGLESv2 and libGLESv1_CM.

libGLESv2 loses (20 functions):

    glBindVertexArrayOES
    glCompressedTexImage3DOES
    glCompressedTexSubImage3DOES
    glCopyTexSubImage3DOES
    glDeleteVertexArraysOES
    glDiscardFramebufferEXT
    glDrawBuffersNV
    glFlushMappedBufferRangeEXT
    glFramebufferTexture3DOES
    glGenVertexArraysOES
    glGetBufferPointervOES
    glGetProgramBinaryOES
    glIsVertexArrayOES
    glMapBufferOES
    glMapBufferRangeEXT
    glProgramBinaryOES
    glReadBufferNV
    glTexImage3DOES
    glTexSubImage3DOES
    glUnmapBufferOES

libGLESv1_CM loses (88 functions):

    glAlphaFuncxOES
    glBindFramebufferOES
    glBindRenderbufferOES
    glBlendEquationOES
    glBlendEquationSeparateOES
    glBlendFuncSeparateOES
    glCheckFramebufferStatusOES
    glClearColorxOES
    glClearDepthfOES
    glClearDepthxOES
    glClipPlanefOES
    glClipPlanexOES
    glColor4xOES
    glDeleteFramebuffersOES
    glDeleteRenderbuffersOES
    glDepthRangefOES
    glDepthRangexOES
    glDiscardFramebufferEXT
    glDrawTexfOES
    glDrawTexfvOES
    glDrawTexiOES
    glDrawTexivOES
    glDrawTexsOES
    glDrawTexsvOES
    glDrawTexxOES
    glDrawTexxvOES
    glFlushMappedBufferRangeEXT
    glFogxOES
    glFogxvOES
    glFramebufferRenderbufferOES
    glFramebufferTexture2DOES
    glFrustumfOES
    glFrustumxOES
    glGenerateMipmapOES
    glGenFramebuffersOES
    glGenRenderbuffersOES
    glGetBufferPointervOES
    glGetClipPlanefOES
    glGetClipPlanexOES
    glGetFixedvOES
    glGetFramebufferAttachmentParameterivOES
    glGetLightxvOES
    glGetMaterialxvOES
    glGetRenderbufferParameterivOES
    glGetTexEnvxvOES
    glGetTexGenfvOES
    glGetTexGenivOES
    glGetTexGenxvOES
    glGetTexParameterxvOES
    glIsFramebufferOES
    glIsRenderbufferOES
    glLightModelxOES
    glLightModelxvOES
    glLightxOES
    glLightxvOES
    glLineWidthxOES
    glLoadMatrixxOES
    glMapBufferOES
    glMapBufferRangeEXT
    glMaterialxOES
    glMaterialxvOES
    glMultiTexCoord4xOES
    glMultMatrixxOES
    glNormal3xOES
    glOrthofOES
    glOrthoxOES
    glPointParameterxOES
    glPointParameterxvOES
    glPointSizePointerOES
    glPointSizexOES
    glPolygonOffsetxOES
    glQueryMatrixxOES
    glRenderbufferStorageOES
    glRotatexOES
    glSampleCoveragexOES
    glScalexOES
    glTexEnvxOES
    glTexEnvxvOES
    glTexGenfOES
    glTexGenfvOES
    glTexGeniOES
    glTexGenivOES
    glTexGenxOES
    glTexGenxvOES
    glTexParameterxOES
    glTexParameterxvOES
    glTranslatexOES
    glUnmapBufferOES

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Chia-I Wu <olv@lunarg.com>
Cc: Paul Berry <stereotype441@gmail.com>

mapi: Hack around glGetInternalformativ not being hidden in GLES

This is hella ugly.  The same-named function in desktop OpenGL is
hidden, but it needs to be exposed by libGLESv2 for OpenGL ES 3.0.
There's no way to express in the XML that a function should be be hidden
in one API but exposed in another.

This won't affect any change now, but it will prevent a regression in a
later patch.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>

glapi/es1: Don't mark core functions as static_dispatch=false

Functions that are part of OpenGL ES 1.0 or 1.1 should have static
dispatch functions in libGLESv1_CM.  This doesn't affect any change yet,
but it will prevent later regressions.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Acked-by: Chad Versace <chad.versace@linux.intel.com>

glapi: Mark all GL_ARB_separate_shader_objects functions with static_dispatch=false

This prevents the entrypoints from being (incorrectly) advertised by
libGL.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Acked-by: Chad Versace <chad.versace@linux.intel.com>

glapi: Remove some duplicate ignore="true" lines

It looks like these were added accidentally by Paul in commit 1a1db174.
From the commit message and the look of the patch, I think this was just
some sed-job left overs.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>

i965/vec4: Don't trim writemasks of texture instructions.

It was my understanding that the writemask works in SIMD4x2 mode for
texturing instructions and doesn't require a message header. Some bit of
this logic must be wrong, so disable it until it's understood.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76617
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

automake: ask the linker to do garbage collection

By doing GC the linker removes all the symbols that are not referenced
and/or used by the final library. This results in a saving of ~100K
up-to ~600K per (stripped) binary (classic vs gallium drivers).

If interested one can ask the compiler to print the sections that are
removed using -Wl,--print-gc-sections.

v2: Check if ld supports the flag before using it.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Matt Turner <mattst88@gmail.com> (v1)

automake: add -Wl,--no-undefined to all libraries

... apart from the dri drivers.
With this final change we can build mesa without fear that
the resulting libraries will have unresolved symbols.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

gallium/targets: add missing library dependencies

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

pipe-loader: reorder PIPE_LIBS

Reorder -lm, -lrt, -lpthreads and -ldl to be consistent with the
rest of mesa.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>

pipe-loader: use PTHREAD_LIBS over -lpthread

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

dri/i965: use CLOCK_LIBS over -lrt

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

automake: consistently use -no-undefined

Set the flag for all but the dri targets. They have missing
glapi symbols which are required for the normal operation with
the X server.

Jon, I fear that you'll need to carry the "no-undefined" hunk
locally when building the dri drivers under cygwin.

Cc: Jon TURNEY <jon.turney@dronecode.org.uk>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

targets/egl-static: move the common LDFLAGS into AM_LDFLAGS

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

targets/omx: do not link against the trace driver

Unused due to the missing GALLIUM_TRACE define.

Requested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

gallium/targets: explicitly include a dummy.cpp and remove all the LINK mayhem

Explicitly setting the linker variable was required for old and broken
build toolchains. At this point this should no longer be needed, and
setting the sources lists will trigger generation of the correct LINK
variables.

Explicitly include dummy.cpp to use g++ to link the static library which
in most cases is based upon C++ code.

v2: Reword commit message.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

gallium/targets: move LLVM_LIBS handling inside Automake.inc

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>

gallium/targets: fold LLVM_LDFLAGS inside Automake.inc

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>

targets/omx: use GALLIUM_OMX_LINKER_FLAGS

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

targets/omx: introduce GALLIUM_OMX_LIB_DEPS

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

targets/pipe-loader: move LLVM_LIBS handling inside PIPE_LIBS

This lets us have only one if HAVE_MESA_LLVM block, rather than
one for each driver.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

targets/pipe-loader: include dummy.cpp irrespective of HAVE_MESA_LLVM

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

targets/pipe-loader: compact duplicating LDFLAGS

Every library uses the same libtool/linker flags. Compact those
into AM_LDFLAGS and append the version script to it.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

pipe-loader/swrast: add soft/llvmpipe defines

Or it compiles them in, but pretends they don't exist

v2: Rebase (Emil)

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

targets/xa: drop libudev references from automake build

Mesa does _not_ link against libudev. Additionally the only place
that deals with it is the loader, thus we can drop the CFLAGS.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

dri/common: LIBDRM_LIBS is not a linker/libtool flag, add it to LIBADD

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

drivers/x11: GL_LIB_DEPS is not a linker/libtool flag, add it to LIBADD

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

configure: autodetect video state-trackers when non swrast driver is present

It makes little sense to enable the vdpau, xvmc and omx state-trackers
as they do not make use of (don't work with) the software driver.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

configure: use grep in quiet mode, rather than piping stderr/stdout to /dev/null

grep -q is easier to read and consistent with the rest of configure.ac.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

configure: error out when building gallium-osmesa without softpipe

Gallium osmesa links against the softpipe driver, thus the build
will fail if it's missing.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Matt Turner <mattst88@gmail.com>

Partially revert "automake: allow only shared builds"

Evidently at least static OSMesa is still used as shared one
causes substantial increase in the load time for some programs
that use it (from seconds up-to ~30min).

Rather than forcing everyone to use shared mesa, revert commit
a6efbac9fb502c4f0166e7a0680b6828e1f6926c and default to shared
build when both shared and static are disabled.

v2: Whitespace cleanup, drop silly comment.

Reported-by: Burlen Loring <burlen.loring@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

configure: enable dri3 only for linux

Currently only linux can make use of dri3, so it would make sense to
enable it explicitly for the platform.
Drop a duplicated libudev check while we're at it.

v3: Properly handle dri3 and reword commit message.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76377
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

mesa: Fix format matching checks for GL_INTENSITY* internalformats.

GL_INTENSITY has never been valid as a pixel format -- to get the memcpy
pack/unpack paths, the app needs to specify GL_RED as the pixel format
(or GL_RED_INTEGER for the integer formats).

Note: This was briefly merged before, but exposed some breakage in gallium, so
was reverted. Hopefully it will stick this time.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Brian Paul <brianp@vmware.com>

st: fix st_choose_matching_format to ignore intensity

_mesa_format_matches_format_and_type() returns true for
GL_RED/GL_RED_INTEGER (with an appropriate type) into an intensity
mesa_format.

We want the `red`-based format instead, regardless of the order we find
them in our walk of the mesa formats list.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: fix texstore for MESA_FORMAT_R8G8B8A8_SRGB

The case for this was in the wrong function, and this format's store
func was not set in the table at all.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Brian Paul <brianp@vmware.com>

freedreno/a3xx/compiler: fix RECT textures

Whether or not the coords are normalized is handled in the texture
state.  But we otherwise need to treat RECT sample instructions as 2D.

Signed-off-by: Rob Clark <robclark@freedesktop.org>

freedreno/a3xx/compiler: avoid negative register ids

In some cases, we need a register to be assigned up to three components
before the base.  Since we can't have negative register #'s, just shift
everything up.  May increase register usage for trivial shaders, but I
don't think we are shader limited in those cases.  A proper solution is
going to require a better register assignment algorithm (which is on the
TODO list), this is just a hack to get us by until then.

Signed-off-by: Rob Clark <robclark@freedesktop.org>

freedreno/a3xx: missing wfi

RB_FRAME_BUFFER_DIMENSION is not a banked context register, so we need
to wait for the GPU to idle before updating it.  But we'd rather not
have unnecessary WFI's, so actually keep track if we need to emit it or
not.

Signed-off-by: Rob Clark <robclark@freedesktop.org>

freedreno/a3xx: little extra debug

Catch things which should not happen in debug builds.

Signed-off-by: Rob Clark <robclark@freedesktop.org>

freedreno: handle null sampler

This is something that XA triggers.  In some cases it will only use
SAMP[1] (composite mask) but not SAMP[0] (composite src).

Signed-off-by: Rob Clark <robclark@freedesktop.org>

i965: Add Cherryview support.

Based on a patch by Ville Syrjälä.

As usual, these are placeholder values; actual values will come later.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>

glsl: Clean up "unused parameter" warnings

../../src/glsl/builtin_functions.cpp:72:1: warning: unused parameter 'state' [-Wunused-parameter]

../../src/glsl/ir_clone.cpp:31:1: warning: unused parameter 'ht' [-Wunused-parameter]

../../src/glsl/ir_equals.cpp:44:1: warning: unused parameter 'ir' [-Wunused-parameter]
../../src/glsl/ir_equals.cpp:50:1: warning: unused parameter 'ignore' [-Wunused-parameter]
../../src/glsl/ir_equals.cpp:68:1: warning: unused parameter 'ignore' [-Wunused-parameter]

../../src/glsl/ir_print_visitor.cpp:149:6: warning: unused parameter 'ir' [-Wunused-parameter]
../../src/glsl/ir_print_visitor.cpp:556:1: warning: unused parameter 'ir' [-Wunused-parameter]
../../src/glsl/ir_print_visitor.cpp:562:1: warning: unused parameter 'ir' [-Wunused-parameter]

../../src/glsl/link_uniforms.cpp:213:1: warning: unused parameter 'record_type' [-Wunused-parameter]

../../src/glsl/loop_analysis.cpp:225:1: warning: unused parameter 'ir' [-Wunused-parameter]

../../src/glsl/loop_unroll.cpp:73:30: warning: unused parameter 'ir' [-Wunused-parameter]
../../src/glsl/loop_unroll.cpp:79:30: warning: unused parameter 'ir' [-Wunused-parameter]
../../src/glsl/loop_unroll.cpp:85:30: warning: unused parameter 'ir' [-Wunused-parameter]

../../src/glsl/opt_copy_propagation_elements.cpp:189:1: warning: unused parameter 'ir' [-Wunused-parameter]

../../src/glsl/opt_cse.cpp:402:1: warning: unused parameter 'ir' [-Wunused-parameter]

../../src/glsl/opt_dead_code_local.cpp:117:30: warning: unused parameter 'ir' [-Wunused-parameter]

../../src/glsl/opt_redundant_jumps.cpp:53:1: warning: unused parameter 'ir' [-Wunused-parameter]

../../src/glsl/opt_vectorize.cpp:301:1: warning: unused parameter 'ir' [-Wunused-parameter]

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

mesa: Clean up "unused parameter" warnings

program/ir_to_mesa.cpp:2008:1: warning: unused parameter 'ir' [-Wunused-parameter]
program/ir_to_mesa.cpp:2272:1: warning: unused parameter 'ir' [-Wunused-parameter]
program/ir_to_mesa.cpp:2278:1: warning: unused parameter 'ir' [-Wunused-parameter]

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

mesa/program: Constify find_variable_storage

Also clean up an old whitespace blooper.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

glsl: Move Doxygen block closing ot the correct place

This is the closing for the "\defgroup IR Intermediate representation
nodes" all the way at the top of the file.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Make sure we always compute valid index bounds before drawing.

When doing software rendering (i.e. rendering to the selection buffer) we need
to make sure that we have valid index bounds before calling _tnl_draw_prims(),
otherwise we can crash.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59455
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

glsl: remove {add,get}_type_ast from glsl_symbol_table

They are not needed since 0da1a2cc369052643ccaea75a1722cc37652d82a.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

mesa: fix glMultiDrawArrays inside a display list

The underlying glDrawArrays() calls weren't getting compiled into
the display list.  We simply need to use the current dispatch table
so the CALL_DrawArrays() is routed to the display list save function.

This patch also fixes glMultiModeDrawArraysIBM and
glMultiModeDrawElementsIBM.

Fixes the new piglit gl-1.4-dlist-multidrawarrays test.

Cc: "10.0" "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: José Fonseca <jfonseca@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

st/mesa: overhaul texture / sample swizzle code

Previously we only examined the GL_DEPTH_MODE state to determine the
sampler view swizzle for depth textures.  Now we also consider the
texture base format for color textures too.

The basic idea is if we're sampling from a RGB texture we always
want to get A=1, even if the actual hardware format might be RGBA.
We had assumed that the texture's A values were always one since that's
what Mesa's texstore code does.  But if we render to the RGBA texture,
the A values might not be 1.  Subsequent sampling didn't return the
right values.

Now we examine the user-specified texture base format vs. the actual
gallium format to determine the right swizzle.

Fixes several fbo-blending-formats, fbo-clear-formats and fbo-tex-rgbx
failures with VMware/svga driver (and possibly other drivers).
No other piglit regressions with softpipe or VMware/svga.

Reviewed-by: Marek Olšák <maraeo@gmail.com>

st/mesa: simplify apply_depthmode()

In preparation for following changes.

I used a temporary test harness to compare the old code to the new
for all possible swizzle inputs.  No change in results.

i965: Use intel_upload_space() for pull constant uploads.

This also happens to fix a leak of the current GS pull constant BO on
context destroy, by just not holding on to the pull const bos after the
surface state is generated.

No statistically significant performance difference on GLB2.7 on HSW at
1024x768 (n=40) or 320x240 (n=44), or on BYT at 320x240 (n=47).

v2: Rebase on intel_upload simplification.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Massively simplify the intel_upload implementation.

The implementation kept a page-sized area for uploading data, and
uploaded chunks from that to a 64kb-sized streamed buffer.  This wasted
cache footprint (and extra state tracking to do so) when we want to just
write our data into the buffer immediately.

Instead, build it around an interface like brw_state_batch() that just
gets you a pointer to BO memory to upload your stuff immediately.

Improves OpenArena on HSW by 1.62209% +/- 0.355299% (n=61) and on BYT by
1.7916% +/- 0.415743% (n=31).

v2: Rebase on Mesa master, drop old prototypes.  Re-do performance
    comparison on a kernel that doesn't punish CPU efficiency
    improvements.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

draw/llvm: improve debugging output a bit

it's useful to know what the llvmbuildstore arguments are going to
be before executing it because it can crash and make sure to
print out the inputs only if we're not generating a gs because
it fetches inputs differently.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

draw/gs: reduce the size of the gs output buffer

We used to overallocate the output buffer sometimes running out
of memory with applications rendering large geometries. The actual
maximum number of vertices out is simply the maximum number of
primitives in (number of gs invocations) multiplied by the maximum
number of output vertices per gs input primitive (i.e. gs invocation).

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

svga: add work-around for Sauerbraten Z fighting issue

Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

svga: null out query's hwbuf pointer after destroying

Just to be extra safe.

Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

svga: add some debug_printf() calls in the query object code

To help debug failures.

Reviewed-by: Jose Fonseca <jfonseca@vmware.com>