pwgen: new package

[Peter: add _LICENSE_FILES]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libnss: don't use target CFLAGS with host toolchain

The OPTIMIZER variable is used to construct CFLAGS for host toolchain.
This breaks the build since we set it to TARGET_CFLAGS, and these may not be
supported by host toolchain. Augment the cross-compile patch to handle
OPTIMIZER so that we can initialize it to TARGET_OPTIMIZER, and override it
when used with host toolchain.

Fixes:
http://autobuild.buildroot.net/results/3f1/3f1afc1b58cb6fe53c438b55f169e2a78238806d/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

imagemagick: bump to version 6.8.9-5

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

fftw: bump to version 3.3.4

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

rpcbind : add startup script

rpcbind must be started at boot time.
Without this any nfs mount will fail.

Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

rpcbind: bump to version 0.2.1

Patches that were updated to take into account minor upstream
 changes:

 - rpcbind-0001-Remove-yellow-pages-support.patch
 - rpcbind-0003-Make-IPv6-configurable.patch

 Patches that were removed as they were no longer needed thanks to
 upstream changes:

 - rpcbind-0002-Do-not-try-to-use-NSS-support-when-not-available-in-.patch

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libtirpc: bump to 0.2.4

This commit bumps the version of libtirpc to the latest upstream
version 0.2.4, with the following changes on the patches:

 Updated to take into account minor upstream changes:

 - libtirpc-0001-Disable-parts-of-TIRPC-requiring-NIS-support.patch
 - libtirpc-0002-uClibc-without-RPC-support-does-not-install-rpcent.h.patch
 - libtirpc-0004-Make-IPv6-support-optional.patch
 - libtirpc-0008-Add-rpcgen-program-from-nfs-utils-sources.patch
 - libtirpc-0009-Automatically-generate-XDR-header-files-from-.x-sour.patch
 - libtirpc-0010-Add-more-XDR-files-needed-to-build-rpcbind-on-top-of.patch

 Removed since they were merged upstream:

 - libtirpc-0003-Add-missing-INET6-conditional.patch
 - libtirpc-0005-rpcent-mark-getrpcbyname-name-argument-as-const-char.patch
 - libtirpc-0006-rpcent-remove-prototypes-of-reentrant-variants.patch
 - libtirpc-0007-doc-Makefile.am-fix-out-of-tree-installation.patch

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

parted: fix nommu build

Add patch to accept uclinux in the tuple, and also disable dynamic libs
for static scenarios. Fixes:
http://autobuild.buildroot.net/results/d9a/d9a9baf0c1bfdb7f7d03ebed084a80ef3001c86d/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

busybox: add security patch for CVE-2014-4607

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-simplejson: security bump to version 3.5.3

No CVE assigned, see https://github.com/simplejson/simplejson/issues/98

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ftop: new package

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

blackbox: deprecate package due to dead upstream

There has been no Blackbox release since 2005, which indicates that
the upstream project is dead. Since there are many other maintained
and alive window manager projects around, I'd like to nominate
Blackbox for deprecation.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

portmap: prevent selecting the package when rpcbind is selected

portmap and rpcbind must not be selected at the same time. Users
should use rpcbind in favor of the deprecated portmap.

Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

bonnie: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Add BR2_DEPRECATED_SINCE_2014_08

In preparation for the deprecation of certain features in 2014.08, add
the BR2_DEPRECATED_SINCE_2014_08 symbol.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

blackbox: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lsof: bump to version 4.87

And install to /usr/bin/lsof rather than /bin/lsof otherwise we still
keep busybox lsof.

[Thomas: fix patch numbering, two patches had the 0001 sequence
number.]

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Makefile: do not add to targets common dependencies

Remove the rule that adds common dependencies to every target in the
"TARGETS" variable, because all those targets are packages that use the
package infrastructure or they depend on targets that use the package
infrastructure. The package infrastructure already adds common
dependencies.  Therefore, this rule is useless.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Makefile: convert "target-generatelocales" to a hook

For consinstency sake convert the "target-generatelocales" rule to a
TARGET_FINALIZE_HOOKS hook.

Signed-off-by: Fabio Porcedda <fabio.porcedda@telit.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Makefile: convert "toolchain-eclipse-register" to a hook

For consinstency sake convert the "toolchain-eclipse-register" to a
TARGET_FINALIZE_HOOKS hook.

Signed-off-by: Fabio Porcedda <fabio.porcedda@telit.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

system: convert "system.mk" recipes to "target-finalize" hooks

Convert "system.mk" recipes to "target-finalize" hooks in order to:
- Ensure an ordering even if top-level parallel make is being used.
- Execute "system.mk" commands after the "target-finalize" initial message
  is printed so they can be clearly distinguished from packages
  building.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Makefile: target-finalize: add TARGET_FINALIZE_HOOKS

Add TARGET_FINALIZE_HOOKS to the "target-finalize" rule to be able to
add to it commands as needed.
This is useful for having a nicer output because commands are executed
after the "target-finalize" initial message, also it is useful to ensure
an executing order even when top-level parallel makefile is being used.

Also convert "TARGET_PURGE_LOCALES" to a hook that uses
"TARGET_FINALIZE_HOOKS".

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lzo: bump to version 2.08

According to the LZO website: "LZO 2.08 has been released: small
update that corrects some reported build problems.". And indeed it
fixes the failed compiler conformance tests that have been observed on
the autobuilders.

Fixes:

  http://autobuild.buildroot.org/results/1e8/1e8e826c4463c9dd3aa5ddb95f08b9564d10a75d/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

devmem2: use a patch that actually applies

The patch provided by Colin Didier and Maxime Hadjinlian was not
applying properly. Fixes:

  http://autobuild.buildroot.org/results/c45/c45eb706fb35ffc87fede777c3d20479a90872ae/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dhcpcd: correct ccache-fixing patch for Xtensa

The Xtensa gcc does not seem to like output on /dev/null. The applied patch
on dhcpcd is thus unusable, and a more verbose version involving a temporary
file is needed.

Reported-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

alsa-utils: bump to version 1.0.28

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

alsa-lib: bump to version 1.0.28

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

uclibc: enable parallel building of libraries

The use of MAKE1 for uClibc dates back 10 years:

commit 8e5fb3fb4ab09b4dc04fe7cb3f7becce6514117b
Author: Eric Andersen <andersen@codepoet.org>
Date:   Sat Dec 11 13:01:10 2004 +0000

    Add initial BR2_JLEVEL support, with some exceptions for apps that
    have broken 'make -j' support

Since that time there were lots of improvements in uClibc that seem to allow
parallel building of libs finally.

Unfortunately uClibc tests have dependences on previously built files,
that's why tests left with MAKE1.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

icu: fix usage of libicudata on ARM EABIhf

The libicudata library was linked as a "data only" library using the
-nostdlib -nodefaultlibs flags, but this causes problems when using
the library on ARM EABIhf systems. Removing those flags fixes the
problem, and is the solution used by Debian, see
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=653457 for all the
details.

[Thomas: fix commit log and title, add more details to the patch
description.]

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@devialet.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

devmem2: fix output when _FILE_OFFSET_BITS=64

When built with _FILE_OFFSET_BITS=64, off_t becomes an long long int
and was printed as an unsigned int which lead to a garbled output.

Signed-off-by: Colin Didier <colin.didier@devialet.com>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@devialet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

pkgconf: don't double prefix lib/include paths with sysroot

A .pc file could contain statements of the form:
    -L/usr/lib
but also:
    -L/path/to/sysroot/usr/lib

The latter form typically occurs when the dependency was configured with a
statement like --with-xxx=$(STAGING_DIR)/usr.

pkgconf only expects the first form, and prefixes it with the specified
sysroot. However, this strategy would result in a double sysroot in the
second case:
    -L/path/to/sysroot/path/to/sysroot/usr/lib

This patch checks for the presence of the sysroot in the specified -L or -I
directives, and only adds the sysroot when not already present.

Partially fixes bug #5750 (https://bugs.busybox.net/show_bug.cgi?id=5750)

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5: support buildroot being located in /usr

qt5 performs sed replacements of /usr to $(STAGING_DIR)/usr in .la files.
However, if buildroot itself is located in /usr, then STAGING_DIR also
starts with /usr, and naive replacements of '/usr' can result in paths of
the form:
    /usr/buildroot/.../sysroot/usr/buildroot/.../sysroot/...

This patch makes the replacements more careful, by first replacing the known
paths BASE_DIR and STAGING_DIR to tokens, then performing the actual
replacement, and finally replacing the tokens with the corresponding paths.

Partially fixes bug #5750 (https://bugs.busybox.net/show_bug.cgi?id=5750)

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

infra: support buildroot being located in /usr

pkg-generic and pkg-autotools both perform sed replacements of /usr to
$(STAGING_DIR)/usr, in .pc and .la files respectively. However, if buildroot
itself is located in /usr, then STAGING_DIR also starts with /usr, and naive
replacements of '/usr' can result in paths of the form:
    /usr/buildroot/.../sysroot/usr/buildroot/.../sysroot/...

This patch makes the replacements more careful, by first replacing the known
paths BASE_DIR and STAGING_DIR to tokens, then performing the actual
replacement, and finally replacing the tokens with the corresponding paths.

Additionally it removes the unnecessary making of a backup copy in
pkg-autotools.

Partially fixes bug #5750 (https://bugs.busybox.net/show_bug.cgi?id=5750)

[Thomas: improve pkg-autotools.mk by including the explanation comment
proposed by Arnout.]

Partially-based-on-a-patch-from: Ben Stoltz <benstoltz@gmail.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

google-breakpad: new package

[Thomas:
 - Introduce a BR2_PACKAGE_GOOGLE_BREAKPAD_ARCH_SUPPORTS Config.in
   symbol to be able to easily propagate the architecture
   dependencies.
 - Wrap the help text, add some more details as suggested by Arnout.
 - Propagate the architecture dependencies to the comment, as
   suggested by Arnout.
 - Remove the dependency of google-breakpad on host-google-breakpad,
   since it's not needed.
 - Add <pkg>_TARGET = NO, because google-breakpad only installs a
   static library, so installation to staging is sufficient.
 - Reorder autotools-package/host-autotools-package invocations, as
   suggested by Arnout.]

Signed-off-by: Pascal Huerst <pascal.huerst@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lzo: security bump to version 2.07

Fixes CVE-2014-4607.

[Thomas: fix small typo in comment.]

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/pifmrds: new package

We needs three little patches:
  - one to make the existing Makefile cross-compile friendly
  - one to pass the LDFLAGS at link time
  - one to add a missing include

[Thomas: add missing 'depends on BR2_arm' in comment, renumber patches
to start at 0001 and not 0000.]

Signed-off-by: Eric Limpens <limpens@gmail.com>
[yann.morin.1998@free.fr: add .mk header; cleanup and split the
 Makefile patch, add missing include; add comments to all patches]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

systemd: rework network/tty units installation

The installation of the network.service and serial-getty.service unit
files are now performed via the <pkg>_INIT_SYSTEMD mechanism instead of
an installation hook.

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs: add defconfig for the Atmel SAMA5D3 Xplained board

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

at91bootstrap3: bump to v3.6.2

In preparation to add support for the SAMA5D3 Xplained board, this
commit bumps the version of the at91bootstrap3 bootloader to
v3.6.2. While doing this, it also:

 - Allows this bootloader on Cortex-A5 based platforms, since SAMA5D3
   are based on Cortex-A5.

 - Removes a patch that no longer applies, and which has been taken
   into account in at91bootstrap3 upstream.

 - Switches to the upstream Github location as the source.

 - Updates the installation commands to match upstream changes in the
   installation process.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

graph-depends: fix when $(O) is a relative path

The graph-depends commands cd into the CONFIG_DIR and run the script
from there. However, this means that when $(O) is a relative path, it
will no longer be correct.  Therefore, use $(BASE_DIR) instead of $(O).

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl-xml-libxml: new package

[Thomas: split from the original patch of Francois.]

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl-xml-sax: new package

[Thomas: split from the original patch of Francois.]

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl-xml-sax-base: new package

[Thomas: split from the original patch of Francois.]

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl-xml-namespacesupport: new package

[Thomas: split from the original patch of Francois.]

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl-net-ssleay: new package

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/script/cpan: improve Makefile generation

- remove trailing space after perl when it's the only dependency
- license: substitution of perl name by BR name
- add a tabulation before source

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

graph-build-time: support python3

This patch is the result of 2to3.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

graph-depends: remove unnecessary redirect of stderr

It hides any error messages reported by make.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

graph-depends: support calling from recursive make

The graph-depends script calls make. If the outer make was called
recursively, or if it was called with '-C <somedir>', then the
environment will contain "MAKEFLAGS=w --". Therefore, the recursive
make prints 'Entering' and 'Leaving' messages, which clobbers the
output for dot.

To avoid this, add "--no-print-directory" to the recursive make
arguments. Since we require GNU make 3.81, we can be sure that this
option is available.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

pkg-download: fix svn download for deleted path

If a SVN path has been deleted in a future revision, downloading a
package's source will fail using 'svn checkout -r'. Fix using
URL@REV syntax since the SVN command will then verify the path at the
specified version. Without using the URL@REV syntax, the SVN command
will attempt to verify the path exists on the the HEAD revision before
checking out the path at the specified revision.

Error seen if SVN path has been deleted in HEAD using svn checkout -r:
  svn: E160013: '/svn/path/' path not found

Signed-off-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dhcpcd: refer to the actual homepage

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

php: security bump to version 5.5.14

Fixes:

CVE-2014-3981 - insecure temporary file use in the configure script.
CVE-2014-0207 - cdf_read_short_sector insufficient boundary check.
CVE-2014-3478 - mconvert incorrect handling of truncated pascal string
size.
CVE-2014-3479 - cdf_check_stream_offset insufficient boundary check.
CVE-2014-3480 - cdf_count_chain insufficient boundary check.
CVE-2014-3487 - cdf_read_property_info insufficient boundary check.
CVE-2014-4049 - Fix potential segfault in dns_get_record().
CVE-2014-3515 - unserialize() SPL ArrayObject / SPLObjectStorage Type
Confusion.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

opkg: bump to version 0.2.2 and update upstream url

Signed-off-by: Ivan Sergeev <vsergeev@kumunetworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mxs-bootlets: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

radvd: bump to version 1.14

This bump reverts e92fb1f90f1b51cd111105d86c058fdca6f3434a (radvd: fix
build against older glibc) since Gustavo has contributed a fix
upstream, which was merged in the 1.14 release of radvd.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ffmpeg: bump to version 1.2.7

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

liboauth: bump to version 1.0.3

Add license information as well.
It could be "or GPL" as well but since we link to openssl that's a murky path
as stated in the README so just leave it at MIT.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libndp: bump to 1.3

Remove upstreamed patch.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

jquery-validation: bump to version 1.12.0

Switch homepage and upstream source, add license file (just mentions
it's under MIT, better than none). Also fixes:
http://autobuild.buildroot.net/results/a2e/a2ed2efe09b12612247a21c5fa3c129f58c9afd8/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

haserl: add preprocessed lualib file so host-lua isn't needed

Updated for haserl-0.9.33

Fixes:
  http://autobuild.buildroot.net/results/663/663daf3d61c12b68dbe5ff42494a3d0d45dfb832/

[Peter: drop unused 0.9.30 patch, host-lua dependency and lua2c LDFLAGS handling]
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libtasn1: bump to version 4.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

radvd: fix build against older glibc

clock_gettime() requires -lrt when linking against glibc older than 2.17.

Fixes:
http://autobuild.buildroot.net/results/e07/e07dd9a82ae4c8778b6901b9bd777f5affb9293a/

[Peter: add comment in .mk as well]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt5: bump to 5.3.1

Remove upstreamed patch.

Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump default to version 3.15.2

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 3.{4, 10, 14, 15}.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

bmon: bump to version 3.2

And add license information, homepage and switch upstream source.

[Peter: no longer needs IPv6/mmu, fix static link]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

metacity: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ti-utils: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

protobuf-c: update license information

[Peter: license is BSD-2c]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

startup-notification: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gptfdisk: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gqview: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

freerdp: fix typo in license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

avrdude: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

nbd: update icense information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

x11vnc: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

xapp_xinit: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

uclibc: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

transmission: add license information

[Peter: also mention openssl exception]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sysprof: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

synergy: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

statserial: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sredird: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

squashfs: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

socketcand: add license information

[Peter: use socketcand.c as license file]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

shared-mime-info: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sane-backends: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

rubix: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

whois: add extra libs for libiconv

The main makefile doesn't check/do anything about linking properly, so
add -liconv to LIBS when it's used. Fixes:
http://autobuild.buildroot.net/results/7e5/7e551efacfa16b9e1915748a2f66fd1021d5bb49/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

musl: bump to version 1.1.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libevent: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libfreefare: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-pygame: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-mad: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-dpkt: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-id3: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

proxychains-ng: add license information

[Peter: strip whitespace]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

crda: bump to version 3.13

[Peter: adjust patch to also drop ldconfig call]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pango: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

openocd: add license information

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>