package/ripgrep: depends on host-rustc

As all providers of rustc also install cargo, there is no need to depend
on the standalone cargo package anymore. Instead add host-rustc to the
dependency list.

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: David Pierret <david.pierret@smile.fr>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rust: drop dependency on host-cargo-bin

As host-rust depends on host-rust-bin, which depends on host-cargo-bin,
remove unneeded dependency.

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: David Pierret <david.pierret@smile.fr>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rust-bin: host variant depends on host-cargo-bin

Ensure installation of pre-built cargo binary by adding it to the
dependency list of the host variant of the pre-built Rust compiler.

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: David Pierret <david.pierret@smile.fr>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/cargo-bin: install if rust-bin selected

If host-rust-bin, the pre-built Rust compiler, is selected as a rustc
provider, then also install the pre-built cargo binary to be coherent.

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
[Arnout: don't install cargo config, alread moved]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: David Pierret <david.pierret@smile.fr>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rust: build and install cargo

Cargo source code is not provided anymore as a separate tarball but is
now built along with the Rust compiler. So update rust host variant to
build Cargo.

For now, all this will be overwritten again by the host-cargo package,
but this package will be removed in later commits.

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Tested-by: Sam Voss <sam.voss@rockwellcollins.com>
[Arnout: merge all install commands in HOST_RUST_INSTALL_CMDS]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rustc: install cargo config as toolchain post-install hook

The cargo config file is much like the cmake and meson configuration
files, something that tells the cargo build system how the
cross-toolchain is configured.

It is currently installed by the cargo package, but this package is
about to be removed as cargo is now built as part of rust
itself. Therefore, install the cargo config file as a toolchain
post-install hook, just like we do for cmake and meson.

However, we don't have a pkg-cargo infrastructure (yet) so we can't
put it there. Therefore, put it in the rustc package - any cargo
package will need rustc.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libnss: bump version to 3.55

Bump version to 3.55. Unfortunately local patch is still pending
upstream and not applied and I've just asked why:
https://bugzilla.mozilla.org/show_bug.cgi?id=1642174

This version requires NSPR 4.27.

Release Notes:
https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/NSS_3.55_release_notes

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libnspr: bump version to 4.27

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/docker-engine: needs more runtime dependencies

fix error:
failed to start daemon: Devices cgroup isn't mounted

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/mbpfan: new package

Adding mbpfan, a fan control daemon for MacBook laptops.

Signed-off-by: Christian Stewart <christian@paral.in>
[Peter: add hash file, drop Debian init script, drop systemd symlinks, add
 DEVELOPERS entry]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/vlc: fix missing headers when compiling with Qt 5.15

Fixes
http://autobuild.buildroot.net/results/832/832226c43549befda7e8c86a52354e7d6adc0a98/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/tpm2-tools: bump version to 4.1.2

Bugfix release with a single fix:

- Fix missing handle maps for ESY3 handle breaks. See #1994

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/tpm2-abrmd: bump version to 2.3.2

Fixes various initialization / systemd issues. From the changelog:

- Provide meaningful exit codes on initialization failures.
- Prevent systemd from starting the daemon before udev changes ownership of
  the TPM device node.
- Prevent systemd from starting the daemon if there is no TPM device node.
- Prevent systemd from restarting the daemon if it fails.
- Add SELinux policy to allow daemon to resolve names.
- Add SELinux policy boolean (disabled by default) to allow daemon to
  connect to all unreserved ports.

Also adjust .hash file white space to match new agreements.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libwebsockets: add fsmount support

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libwebsockets: add libglib2 support

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libwebsockets: bump version to 4.0.20

Other changes:
  - Remove upstream patch.
  - Change license type to MIT.
  - Update license shasum due to the above change.
  - Upstrem agained optional support for libglib2 and fsmount, we
    disable those so far

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr: forcibly disable new features]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libwebsockets: add support for extensions

libwebsockets currently depends on zlib, however, as of commit
13ba5bbc633ea962d46d9f2bfb2e87c9f7e83b62 (from 2013!) zlib is not actually a
requirement if extensions are not enabled.

By default, libwebsockets sets the "LWS_WITHOUT_EXTENSIONS" option to "ON,"
which removes the need for zlib as a dependency. Because of this default
setting, there are two options:

1) Remove the dependency on zlib, create a new option under Config.in to allow
a user to enable extensions, add zlib as a dependency, and set
LWS_WITHOUT_EXTENSIONS to "OFF" if that option is selected.

2) Keep the dependency and explicitly set LWS_WITHOUT_EXTENSIONS to "OFF."

Below are the size differences in bytes:
  - Without zlib and extensions: 44636
  - With zlib and without extensions: 44720
  - With zlib and with extensions: 44732

Considering the size difference between all 3 is an incredible 96 bytes, and
the difference between what we have now, and enabling extensions is an
insurmountable 12 bytes, it is safe to keep the dependency on zlib and always
enable extensions.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/powerpc-utils: bump to version 1.3.7

Update indentation in hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/librtas: bump to version 2.0.2

Update indentation in hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/snmppp: fix SNMPv3 with gcc <= 5

Fixes:
 - http://autobuild.buildroot.org/results/bfe3faefc007f2e746c9f0af9b7d0926bb72dc9e

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/freeswitch: fix build error

Freeswitch has been tested agains tan older version of libcheck, 0.12.0
or earlier, while Buildroot has 0.15.1. With 0.13.0, the API of libcheck
has changed, and Freeswitch does not account for this.

Fixes
http://autobuild.buildroot.net/results/5db/5dbce5860f57c1457962aa295857689f49a60bc6/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr: expand commit log with the root cause]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/chocolate-doom: bump to version 3.0.1

Update indentation in hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/freeswitch-mod-bcg729: bump version to 1.0.5

Reformatted hashes.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libhdhomerun: bump version to 20200521

Reformatted hashes.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libopenh264: bump version to 2.1.1

Release notes:
https://github.com/cisco/openh264/blob/openh264v2.1.1/RELEASES

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/dovecot-pigeonhole: bump version to 0.5.10

Release notes:
https://raw.githubusercontent.com/dovecot/pigeonhole/release-0.5.10/NEWS

Reformatted hashes.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

boot/barebox: bump version to 2020.07.0

Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/check: bump version to 0.15.1

Release notes: https://github.com/libcheck/check/blob/0.15.1/NEWS

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/moarvm: bump to 2020.07

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/xapian: bump to version 1.4.16

Updated indentation in hash file (two spaces)

Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/ncdu: bump to version 1.15.1

Updated indentation in hash file (two spaces)

Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libolm: bump to version 3.1.5

Updated hash file indentation (two spaces)

Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/website: update for 2020.02.4

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2020.02.4

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit dee53013da87dfa4bcb3433bdef79ec43b5a5c24)
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/website: update for 2020.05.1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2020.05.1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 667adccb927395ab99d17fc8877b21bf70614218)
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libwebsockets: remove dependency on mmu

Six years ago, commit b6b5bb518d28850e024b90db1129b7f86e9d416c added the MMU
dependency for the libwebsockets package. However, according to the git
history of the CMakeLists.txt file, libwebsockets has supported the vfork
function for at least the last five years.

After testing with the qemu_arm_versatile_nommu_defconfig and the
br-arm-cortex-m4-full.config file, no errors occurred when building
libwebsockets without MMU support.

Remove the dependency; it is no longer necessary. Update the reverse
dependencies as needed.

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/enchant: bump to version 2.2.8

- Update site to get latest version
- Update hash of COPYING.LIB (update in FSF address with
  https://github.com/AbiWord/enchant/commit/adcb08292d4650a1c258f9b02c53cf1e26b47185)
- Update indentation in hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/qlibc: bump to version 2.4.5

Update indentation in hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-mail-dkim: bump to version 1.20200708

- new scheme for version
- LICENSE file added

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-net-dns: bump to version 1.25

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-mojolicious: bump to version 8.57

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-lwp-protocol-https: bump to version 6.09

now, LICENSE has its own file

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-libwww-perl: bump to version 6.46

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-http-message: bump to version 6.25

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-http-entity-parser: bump to version 0.23

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-gd: bump to version 2.72

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-file-util: bump to version 4.201720

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/perl-file-slurp: bump to version 9999.32

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/minizip: use pkg-config to find zstd

Fix build with zstd in version 2.10.0

Fixes:
 - http://autobuild.buildroot.org/results/0fe0ca0a7d39f863614f2aecd9eefc20cd64daf4

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

gitlab-ci: convert only/except to rules

only/except keywords will be deprecated by upcoming gitlab release,
upstream recommend to use rules keyword instead [1][2][3][4][5].

This patch convert .gitlab-ci.yml to use rules, no functional
changes intended.

After this patch, we should still have the following behaviour
while pushing commit, tag, branches:

     - to trigger only the check-* jobs:
       $ git push gitlab HEAD:<name>

     - to trigger all defconfigs and all check-* jobs:
       $ git push gitlab HEAD:<name>-defconfigs

     - to trigger all runtime tests and all check-* jobs:
       $ git push gitlab HEAD:<name>-runtime-tests

     - to trigger one defconfig job:
       $ git push gitlab HEAD:<name>-<defconfig name>

     - to trigger one runtime job:
       $ git push gitlab HEAD:<name>-<test case name>

[1] https://gitlab.com/gitlab-org/gitlab/-/commit/7eaaa597e24bf24743bdd8f8d1d51ade83b3f6de
[2] https://about.gitlab.com/releases/2020/06/22/gitlab-13-1-released/#templates-to-simplify-initial-rules-keyword-configuration
[3] https://about.gitlab.com/releases/2020/05/22/gitlab-13-0-released/#auto-devops-and-secure-configuration-templates-are-changing-to-%60rules%60-instead-of-%60only/except%60
[4] https://gitlab.com/gitlab-org/gitlab/issues/27449
[5] https://gitlab.com/groups/gitlab-org/-/epics/2783
[6] https://buildroot.org/downloads/manual/manual.html#_using_the_run_tests_framework

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

DEVELOPERS: add Angelo Compagnucci to several packages

This patch adds some packages I contributed to my entry.

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

linux: bump CIP RT kernel to version 4.19.132-cip30-rt12

This patch bumps Linux CIP RT to version 4.19.132-cip30-rt12

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

linux: bump CIP kernel to version 4.19.132-cip30

This patch bumps Linux CIP to version 4.19.132-cip30

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/bananapi_m2_zero: new defconfig

The Banana Pi M2 Zero [1] is a board from Sinovoip, based on the
Allwinner H2+ SoC.

It is similar to the other Banana Pi M2* boards, from which this
configuration is inspired.

[1]: http://www.banana-pi.org/m2z.html

Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/snps_archs38_hsdk: re-enable USB support

With this patch we enable CONFIG_USB for HSDK, which is not explicitly
selected by UDL since the commit 5d50bd440bc2 ("drm/udl: Make udl
driver depend on CONFIG_USB"). Commit 4c13ca86dcf8 ("ARC:
[plat-hsdk]: fix USB regression") is not yet backported to Linux
kernel 5.6.x, so we enable this option in fragment file for HSDK.

Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/globalscale_espressobin: new defconfig

Basic support for the Marvell ESPRESSObin, by Globalscale Technologies.

  http://espressobin.net

The kernel config has been extended with a fragment to enable switchcore
support, DSA drivers, and VLAN filtering in the bridge.  To make use of
this you need a custom libnl based application, or the iproute2 suite
rather than the brctl tools, which don't support the VLAN filtering.

Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/grpc: bump version to 1.30.2

Other changes:
  - Add a dependency on libabseil-cpp
  - Update the patches to apply properly.

Tested with the following distributions:
  - Debian 9
  - CentOS 7
  - Fedora 32

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libabseil-cpp new package

This package is a new dependency on grpc versions > 1.25.0

Tested with the following distributions:
  - Debian 9
  - CentOS 7
  - Fedora 32

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/debianutils: bump version to 4.11

+ updated copyright hash

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-spidev: bump to version 3.5

This patch bump python-spidev to version 3.5

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/python-pillow: bump to version 7.2.0

This patch bump pillow to version 7.2.0. The bump requires the python
xml module available.

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/ltris: fix build with gcc 4.8

Fixes:
 - http://autobuild.buildroot.org/results/991d601b30831df61c78dc7109a2f4ab9ace3f84

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/gvfs: fix linking with libmetadata

Fixes:
 - http://autobuild.buildroot.org/results/fa892c41b6b9285839a0164b000e37fb04dcc194

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/easy-rsa: bump to version 3.0.7

Update indentation in hash file (two spaces)

https://github.com/OpenVPN/easy-rsa/releases/tag/v3.0.7

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/cramfs: bump to version 2.1

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/python-pydal: bump to version 20200714.1

this patch bumps python-pydal to version 20200714.1

Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libzip: fix build with cmake < 3.16

Fixes:
 - http://autobuild.buildroot.org/results/7e996aebafa4c690ff130b7d18e5b09c7b255829

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libgsasl: enable gcrypt support

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libgsasl: bump to version 1.8.1

- Update hash of README
- Update indentation in hash file (two spaces)

https://lists.gnu.org/archive/html/info-gnu/2020-01/msg00000.html

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/mraa: add json-c support

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/gcc: bump to gcc 10.2

Remove upstream patch backported to gcc 10.2:
https://gcc.gnu.org/git/?p=gcc.git;a=commitdiff;h=e86ae54172bb982e3c9d5aa62d20be5b72fe0f24

"GCC 10.2 is a bug-fix release from the GCC 10 branch
containing important fixes for regressions and serious bugs in
GCC 10.1 with more than 94 bugs fixed since the previous release."

https://gcc.gnu.org/pipermail/gcc-announce/2020/000164.html

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/mraa: fix architecture

mraa supports aarch64 since version 0.9.0 and
https://github.com/eclipse/mraa/commit/47ec54c3330de176ed0b8e3254e81d9451fb866a

mips is supported since version 1.9.0 and
https://github.com/eclipse/mraa/commit/6770be911ba18b25ff284eeac80390e4111f602f

Moreover, BUILD_ARCH must be passed otherwise build will fail on i686
and arm

Fixes:
 - http://autobuild.buildroot.org/results/8e99eb282668f6f83f43c5be45112d82936e3408
 - http://autobuild.buildroot.org/results/75ba0840da6eb4907847ef05adeec2df109c9937

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/haproxy: fix static only build

Add a patch to avoid dlfcn.h use when the toolchain is static only.

Fixes:
http://autobuild.buildroot.net/results/98caf66e8a7f72ee24e4d39f3aab541f82310369/
http://autobuild.buildroot.net/results/3024eb48a026b1a91e39f7d996be3d7f50314762/
http://autobuild.buildroot.net/results/e6bbf1469926bde9057f270940d1455e0f758e0e/

Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/squid: security bump to version 4.12

- Fix CVE-2020-15049: Cache Poisoning Issue in HTTP Request processing
- Fix CVE-2020-14058: Denial of Service issue in TLS handshake
- Fix CVE-2020-14059: Denial of Service when using SMP cache

This version also fix a build failure with systemd

Fixes:
 - http://autobuild.buildroot.org/results/4f586c497577d6c96289e821430fa2c2f61eda2a

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/squid: add optional systemd dependency

systemd is an optional dependency (enabled by default) since version
4.11 and
https://github.com/squid-cache/squid/commit/6fa8c66435d55a2e713db0222cdca3a9dccf5bbe

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/netopeer2: add package

Netopeer2 is a set of tools implementing network configuration
tools based on the NETCONF Protocol.

Netopeer2 needs libnetconf2 to have SSL/TSL and SSH support, so
we enable both openssl and libssh+server from netopeer2, so that
libnetconf2 has appropriate support. But netopeer2 does not use
either, so does not build-depend on them.

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr:
  - fix dependencies and their comments
  - explain openssl and libssh+server dependencies
  - fix codestyle in Config,in, noticed by Adam
  - fix codestyle in .mk
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/pkg-generic.mk: move pkg_size_{before, after} and check_bin_arch functions

These functions are no longer using the GLOBAL_INSTRUMENTATION_HOOKS
mechanism, so it doesn't make much sense for them to be in the section
of pkg-generic.mk related to those hooks.

Move them to the "Helper functions" section.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/pkg-generic.mk: exclude the staging sub-directory

Now that we are checking the host directory changes throughout all
installation steps and not just during the "host installation step",
it means that changes done within the staging directory (which is a
subdir of the host directory) are also visible in the
.files-list-host.txt file.

Note that this problem already potentially occurs if a host package is
installing files in the staging directory: they would be listed in
.files-list-host.txt even without the changes in this series.

To fix this up, we simply exclude files that are beneath the
$(STAGING_SUBDIR). Note that we do that in all cases, so when
searching $(HOST_DIR), $(HOST_DIR)/$(STAGING_SUBDIR) is excluded, but
when searching $(TARGET_DIR), $(TARGET_DIR)/$(STAGING_SUBDIR) is
excluded, and when search $(STAGING_DIR),
$(STAGING_DIR)/$(STAGING_SUBDIR) is excluded. This is not a problem in
practice since $(TARGET_DIR)/$(STAGING_SUBDIR) and
$(STAGING_DIR)/$(STAGING_SUBDIR) don't exist, but it's not very
nice. However, it allows to keep the code simple.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/pkg-generic.mk: rework pkg_size logic with the "installed" step

This commits reworks the pkg_size logic to no longer use the
GLOBAL_INSTRUMENTATION_HOOKS mechanism, but instead be directly
implemented within the configure step and install step.

The problem with the current implementation in the
GLOBAL_INSTRUMENTATION_HOOKS is that we only capture what is installed
in $(HOST_DIR) during the "host installation step", what is installed
in $(TARGET_DIR) during the "target installation step" and what is
installed in "$(STAGING_DIR)" during the staging installation step.

While this seems reasonable in principle, it is in fact not completely
true. For example, "toolchain", which is a target package, installs
tons of files in $(HOST_DIR). "qt5base", which is also a target
package, also installs things in $(HOST_DIR). Same with the "syslinux"
package.

The idea behind this patch is pretty simple:

 - At the beginning of the configure step, right after the per-package
   directories have been populated (if BR2_PER_PACKAGE_DIRECTORIES=y),
   we capture the state of the HOST_DIR, TARGET_DIR and STAGING_DIR.

 - At the end of all install steps (which is possible thanks to the
   newly introduced "install" step), we capture again the state of
   HOST_DIR, TARGET_DIR and STAGING_DIR, and compare it to what we
   have saved at the configure step.

So regardless of whether a file has been installed in $(HOST_DIR)
during the target or staging installation steps of a target package,
or if a host package has installed a file in $(TARGET_DIR), we will
detect it.

The pkg_size_before and pkg_size_after macros are intentionally left
where they are (even if they now fall in the middle of the
GLOBAL_INSTRUMENTATION_HOOKS implementations) to minimize the diffstat
and facilitate review.

Note that we also have to change check_bin_arch to be explicitly
called from the install step rather than through a
GLOBAL_INSTRUMENTATION_HOOKS as it depends on the .files-list.txt file
produced by the pkg_size_after function.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/pkg-generic.mk: create directories upfront in the configure step

We currently create HOST_DIR, TARGET_DIR, STAGING_DIR and BINARIES_DIR
in their respective installation steps. However, as we are about to
change how the logic to capture files installed by packages is
implemented, we will need these directories to exist at the configure
step to keep things simple.

Note that when BR2_PER_PACKAGE_DIRECTORIES=y, the HOST_DIR, TARGET_DIR
and STAGING_DIR are anyway already created at the configure step, when
populating the per-package HOST_DIR and TARGET_DIR. This also means
that we can drop the "mkdir" from per-package-rsync.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
  - create directories after MESSAGE
  - use $(Q) not @
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/pkg-generic.mk: introduce final 'install' step

We currently have four different install steps: target installation,
staging installation, images installation and host installation. These
steps are directly triggered from the $(1)-install make target, so
there is no place where we can run some logic once all installation
steps have completed.

However, as part of improving the reliability of the logic done in
step_pkg_size_before and step_pkg_size_after to detect the files
installed by packages, we would in fact need to run some logic after
all installation steps have completed. This will allow us to make sure
that all files are detected, even if a host package installs something
in the target directory, or if a target package installs something in
the host directory.

To achieve this, this commit implements a new stamp file,
.stamp_installed, which is a step that depends on all four install
steps. Currently, this step does nothing except creating the stamp
file.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: remove stampfile on foo-reinstall]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/pkg-generic.mk: drop useless $(1) argument in step_pkg_size_{before, after}

The $(1) argument passed to step_pkg_size_{before,after}, which
contains the package name, is no longer used. We simply use $(PKG) to
get the upper-case version of the package name.

So, let's drop this first argument that isn't needed.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/pkg-generic.mk: use $(PKG)_NAME in step_pkg_size_after

Since we're already using $(PKG)_DIR in step_pkg_size_after, we can
also just use $(PKG)_NAME. This allows to make $(1) useless, which
means it can be dropped in a follow-up commit.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/pistache: bump version to f2f5a50fbf

Upstream improved testing and fixed minor issues.

Signed-off-by: Thomas Ruschival <thomas@ruschival.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/raspberrypi*: bump kernel version to 1c64f4b (5.4.51)

Now based on 5.4.51 (from 4.19.113)

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rpi-userland: bump version to 188d3bf

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rpi-firmware: bump version to 542aceb

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gloox: bump version to 1.0.24

Signed-off-by: Yair Ben Avraham <yairba@protonmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/{mesa3d, mesa3d-headers}: bump version to 20.1.4

Removed patch 0001-musl.patch, upstream added a different fix in 2019:
https://gitlab.freedesktop.org/mesa/mesa/-/commit/da84d071a6f4c33015525c168d22c0f121025010

Renumbered remaining patches.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/{openjdk,openjdk-bin}: bump to version 14.0.2+12

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/x11vnc: fix build with 64 bits time_t

Fixes:
 - http://autobuild.buildroot.org/results/75e45b566c85d19c5ed00529d036b4808413b1ca

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/setools: update the project location in the Kconfig help

setools is no longer hosted on https://github.com/TresysTechnology/setools/.
Updated the Kconfig help to point to its new home,
https://github.com/SELinuxProject/setools/.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/setools: remove C++ dependency on comment

Bump to 4.1.1 (commit 96d3d017963b) removed setools' dependency on
BR2_INSTALL_LIBSTDCPP, but the corresponding inverse dependency on one
of its Kconfig comment was not removed. This led to have the package
being available while a Kconfig comment on non-matched dependencies is
shown. Fix this by removing the dependency on !BR2_INSTALL_LIBSTDCPP on
the Kconfig comment.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gettext-tiny: bump to version 0.3.2

- Adapt license hash
  (minor additions in LICENSE file about files in doc folder:
  "Files contained in the doc/ directory may be licensed under different terms.",
  but there are no folder present so no license change)
- Also separate the fields in the hash file by two spaces

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/nettle: bump version to 3.6

Release notes:
https://git.lysator.liu.se/nettle/nettle/-/blob/master/NEWS

Reformatted hashes.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/cryptodev-linux: bump to version f2927e3

This version mainly fixes build issues with more
recent kernels.

98b163a cryptlib.c: fix build on kernel v5.5+
7e72f67 enabled the support for TLS1.1 - AES128-SHA1 - AES256-SHA1
9e76506 Fix build for Linux 5.8-rc1

Signed-off-by: Alejandro González <alejandro.gonzalez.correo@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/freerdp: security bump to version 2.2.0

Fix CVE-2020-15103 - Integer overflow due to missing input sanitation in
rdpegfx channel

https://github.com/FreeRDP/FreeRDP/releases/tag/2.2.0

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libzip: add mbedtls optional dependency

mbedtls is available (and enabled by default) since version 1.5.2 and
https://github.com/nih-at/libzip/commit/8e01a4fe8fa830c973b6a00f0da1e8b01789529a

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libzip: use ENABLE_BZIP2

Use ENABLE_BZIP2 option which is available since version 1.5.2 and
https://github.com/nih-at/libzip/commit/028c492c9d45ca29e2fbec79a203ba492016f15e

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>