iputils: fix hang issue with ping -f

Patch from upstream git (git://git.linux-ipv6.org/gitroot/iputils.git). We
should probably bump the version to a newer snapshot in the 2015.02 cycle,
but this is a safer option for 2014.11.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/sdl_sound: fix constness in debug mode

When in debug mode, ./configure forces -Werror, which uncovers a
constness issue in the speex decoder.

Add a patch to fix this.

Fixes:
    http://autobuild.buildroot.net/results/6f5/6f5e1b782923d6e69e929466f0ddd3eeba28c6f1/
    http://autobuild.buildroot.net/results/c1b/c1b31dc37fe62cb6901edad02bf50d73072b7cf0/
    http://autobuild.buildroot.net/results/162/162e6d77e5812060001ea22faff99055aae3122a/
    ...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/rpm: add missing kconfig dependency to zlib

Since we build-depend on zlib, forcibly select it from kconfig.

This went unnoticed so far, because we did select openssl which
in turn selects zlib. But rpm needs zlib for itself, too.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gcc: use correct symbol for powerpc version mask

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-tornado: add zlib run-time dependency

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/rpm: add missing dependency to openssl

We forcibly enable use of an extrernal openssl in rpm, so we must depend
on it.

openssl is correctly selected from kconfig, but there is no build-time
dependency to it.

It was not an issue so far, because openssl always sorts before rpm, so
gets built before. Unless one wants to just build rpm to debug an
autobuilder failure, that is.

Add that build-time dependency to openssl.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libunwind: fix comment dependencies

Comment should be shown when no threads OR not uclibc-snapshot / glibc, not
AND.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libunwind: link to libgcc_s, not libgcc

Backport a fix from upstream to link against libgcc_s instead of libgcc.

Fixes ltrace build failures:
    http://autobuild.buildroot.net/results/a0c/a0c132f8cdea2c34ceff27606764a60c2853f644/
    http://autobuild.buildroot.net/results/67f/67fbd04d6ae187861fa1bf84d3df1877c7be6fb2/
    http://autobuild.buildroot.net/results/0ca/0ca564101b870e5953acb66ac832ce9e23198392/
    ...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/mutt: do not run compiled programs from ./configure

mutt's ./configure is broken for cross-compilation, because it runs
programs to check for some features or behaviours.

So, we have to feed it some variables to force the checks the way they
are supposed to be resolved for our use-case.

Fixes:
    http://autobuild.buildroot.net/results/58c/58c73e72e1387c7f490ad97a86666b12393917cf/
    http://autobuild.buildroot.net/results/73b/73b8c54ca41cc475594c24a8d6176d511dcb85e6/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libcap: needs headers >= 3.0

libcap requires XATTR_NAME_CAPS, which was introduced in Linux 2.6.24.

However, we have some toolchains, liek the CodeSourcery PowerPC 2011.03,
that is missing those defines, even though it uses headers from Linux
2.6.38.

Since there is no perfect way to avoid the situation, just require
headers >= 3.0 to build libcap.

Propagate the new dependency to packages that select libcap.

Fixes a lot of build failures, of which:
    http://autobuild.buildroot.net/results/e90/e909ca48ad2d1c85b19258f65e0c89a2813ac45e/
    http://autobuild.buildroot.net/results/23a/23aac9bb1cc48e5974bcf50256a16c67318f9ba2/
    http://autobuild.buildroot.net/results/597/597da58cb2fccb92d7883802c60b31264cacad08/
    http://autobuild.buildroot.net/results/538/538b23417c68f6c8c0c8c92dfc0e8ed314bac01b/
    ...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump default version to 3.17.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 3.{17, 14, 10}.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/clamav: fix build with uClibc

clamav wants to use backtrace, and decides whether it can use it if it
detects a glibc >= 2.1.

But uClibc does impersonate a glibc >= 2.1, so clamav concludes it is
possible to use backtrace. So it includes execinfo.h, which is missing
in our default uClibc config file.

So, just extend the test so that backtrace support is disable on uClibc,
unless it has been configured with backtrace support.

A far better solution would be to add a ./configure check for backtrace,
but this patch is sufficient enough.

Fixes:
    http://autobuild.buildroot.net/results/cff/cffa32fcedda735983d4805d6d4fa77844539b10/
    http://autobuild.buildroot.net/results/e0a/e0a765a94a538b0b936ea512f7aba0264fac6309/
    ...

Bugtracker: https://bugzilla.clamav.net/show_bug.cgi?id=11170

[Peter: add bugtracker URL as suggested by Bernd]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libv4l: needs headers >= 3.0

libv4l includes linux/media.h, which was introduced in v.2.6.39.

So, require at least 3.0 to be sure, since we have toolchains (like the
Code Sourcery Powerpc 2011.03) that still use 2.6.38 headers.

Fixes:
    http://autobuild.buildroot.net/results/ff7/ff7977c1cea0edfd230e12b74fc2c34bac7a0e4e/
    http://autobuild.buildroot.net/results/2bd/2bd30d942ec718e0a46ba2d1c043c9b6e2e6578b/
    http://autobuild.buildroot.net/results/c37/c371f4de7ec4b959310ca8e08cf289385fa0feae/
    ...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/duma: add missing define when installing

Commit 3ab9774 (package/duma: do not let Makefile guess OS) added a
define to not let duma's build system guess the OS, mostly to avoid a
warning, but forgot to add that same define to the install commands.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

packae/duma: do not build test programs

Building test programs fails for a static link, because duma.a redefines
memcpy and strcpy, which are already present in the C library.

Fixes quite some build failures:
    http://autobuild.buildroot.net/results/3c7/3c7a4751c7ca71ad429c2d67f380aa225f151350/ (arm)
    http://autobuild.buildroot.net/results/358/358293d22ae24237719f0aa27e88e87d03856973/ (x86_64)
    http://autobuild.buildroot.net/results/947/9472d78b890639d3204e1942491f1eae62fb8a36/ (powerpc)
    http://autobuild.buildroot.net/results/ffd/ffd2e7ab7a6045f5eeaa25cd25088ad0a5b6509a/ (i686)
    ...

Also rename patches according to the new naming scheme.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/aircrack-ng: fix static build

Two fixes in one:

  - openssl's libcrypto needs -lz, but because aircrack-ng does not use
    pkg-config, it misses this dependency. The proper fix would be to
    use pkg-config, like is done for pcre with patch
    0001-Makefile-use-pkg-config-to-find-libpcre-it-s-more-cros.patch
    but adding -lz is much easier.

  - sqlite needs -lpthread, so -lpthread must be added _after_ -lsqlite,
    but we currently add it before. So, force -lpthread after -lsqlite
    when we are doing a static build.

Fixes:
    http://autobuild.buildroot.net/results/1ea/1ea877851e9d2aeeaf9d320bef12321ec2925b5b/
    http://autobuild.buildroot.net/results/cdf/cdf0203fc99d5f7e41e508f6d9edb78a0f0ea732/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

host-qemu: fix install

at configure time, PREFIX is already set with $(HOST_DIR)/usr
so, don't use DESTDIR

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

iputils: fix openssl select

It's BR2_PACKAGE_OPENSSL, not BR2_OPENSSL... oops!

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dovecot: fix static build

Add a patch removing reference to MODULE_SUFFIX when it is undefined.

Fixes:
http://autobuild.buildroot.net/results/c68/c6844bbffff1cd4f738a5fced011d28f73c90b16/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

botan: disable for static builds

it tries to include <dlfcn.h>

see http://autobuild.buildroot.net/results/2d1/2d1563e253b669b45c9df449c5b3a750c04a43dc/

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/sysvinit: drop tty1/2

We don't do it for busybox init so do the same for consistency here.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/qt5webkit: fix build failure

This patch fixes build failure when the host python interpreter is python3.

Fixes:
  http://autobuild.buildroot.net/results/af8/af8f3d3cc018006cee58d57cd9e8c6d8b3de3247/

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/qt5webkit: rename patch to the new convention

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dbus: security bump to version 1.8.10

Fixes:
CVE-2014-7824 - Denial of service via incomplete fix for CVE-2014-3636

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

php: security bump to version 5.5.19

Fixes:
CVE-2014-3710 - fileinfo: out-of-bounds read in elf note headers.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/manual/resources.txt: fix patchwork link

The patchwork website needs the trailing slash, otherwise it returns a 404.

Reported-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

doc/news.html: fix html tag closing

From the recent dev days meeting report addition.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python3: don't use wcsftime() on uClibc

As investigated in bug #7646, wcsftime() doesn't work properly with
uClibc. Until it gets fixed in uClibc, let's tell Python 3 to not use
it. Python 3 will fall back to strftime(), which works properly.

[Peter: fix typo in comment]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Beyonlo <beyonlo@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/news.html: add link to report from ELCE developers days

And annonce the next one as well.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/news.html: add 2014.11-rc1 announcement link

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ruby: security bump to version 2.1.5

Fixes:
CVE-2014-8090 - Another Denial Of Service XML Expansion.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

wireshark: security bump to version 1.12.2

Fixes:
CVE-2014-8710 - SigComp UDVM buffer overflow.
CVE-2014-8711 - AMQP crash.
CVE-2014-8712 - NCP crashes.
CVE-2014-8713 - NCP crashes.
CVE-2014-8714 - TN5250 infinite loops.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libmemcached: disable sanitizer

The tests are flawed and we don't generally enable a dozen hardening
CFLAGS automatically. Fixes:
http://autobuild.buildroot.net/results/a84/a84ab4f0fdea6bbab971ba379e3066cddb25bfaa/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt5base: unconditionally install network, sql, xml and test modules to target

The qt5 build system currently unconditionally builds and installs into
staging these libraries, so ensure they also get installed into target to
make sure we don't end up with dynamic linker errors at runtime.

From src.pro:

SUBDIRS += src_network src_sql src_xml src_testlib

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt5base: unconditionally install Qt5printSupport if widgets are enabled

The qt5 build system currently unconditionally builds and installs into
staging Qt5PrintSupport if widgets are enabled, so ensure it also gets
installed into target to make sure we don't end up with dynamic linker
errors at runtime:

test: error while loading shared libraries: libQt5PrintSupport.so.5: cannot
open shared object file: No such file or directory

From src.pro:

!contains(QT_CONFIG, no-gui) {
        ..
        !wince*:!winrt {
            SUBDIRS += src_printsupport
            src_plugins.depends += src_printsupport
        }

}

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

schifra: mark as broken

There are many build failures caused by schifra, due to upstream
changing the tarball without doing new releases. Since has been an
on-going problem for some time, and is now the #1 issue in the
autobuilders. So let's mark this package broken, until someone cares
enough to fix it, or until we remove it.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2014.11-rc1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES: update with recent changes

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/shairport-sync: fix avahi dependency

shairport-sync uses mDNS to pubish its service. This task is implemented
(among others) in avahi and tinysvcmdns.

To use avahi as the mDNS backend, shairport-sync requires libavahi-client or
libdns_sd. Both will work, but libavahi-client is sufficient.

To get libavahi-client support from avahi BR2_PACKAGE_AVAHI_DAEMON and
BR2_PACKAGE_DBUS needs to be selected. Unfortunatly this is not immediately
obvious if you've not checked avahis configure file. A
BR2_PACKAGE_LIBAVAHI_CLIENT config symbol may help here for clarification,
but is not present yet.

Fixes autobuild errors:
  - http://autobuild.buildroot.net/results/a6a/a6ab7641a3cafcdaeffe11f08d5fcacbbb882d8d/
  - http://autobuild.buildroot.net/results/cb4/cb41980f2fb416d627bea0950e1dae727eae0ca6/
  - http://autobuild.buildroot.net/results/009/00929df01474813be576936e80e86374efdbc327/
  - http://autobuild.buildroot.net/results/a40/a40b8cf9aaa4ade4d96524219276cfad2920104c/
  - http://autobuild.buildroot.net/results/03f/03fff2805b3348f2557bbef73a716eadea3add03/

and some more.

Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

bmon: uclinux is also linux

Fixes:
http://autobuild.buildroot.net/results/4d0/4d0c3c8b68b37f532378f19041379cb5c5798950/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libmemcached: disable libmudflapth support

We're not handling it (copying it) for external toolchains and it's
causing build failures. Fixes:
http://autobuild.buildroot.net/results/9d1/9d1e414850307487d65435216ae0ddee56d1098f/
http://autobuild.buildroot.net/results/f08/f08c8e5514e054397428677f08fadac5386189dc/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES: update with recent changes

The description of important changes still needs to be added.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sysv init scripts: fix == bashism

test a == b is not available in e.g. dash.

Command(s) used for editing:

  q=\[\"\'\]
  operand="${q}?[$]?[a-zA-Z0-9_\?]+${q}?"  ## doesn't detect ${VAR}
  test_expr="(\[\s+${operand}\s+)==(\s+${operand}\s+\])"

  find . -type f -name '[SK][0-9][0-9]*' | \
     xargs sed -r -e "s@${test_expr}@\1=\2@g" -i

Signed-off-by: André Erdmann <dywi@mailerd.de>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/apf9328: bump to a modern kernel

Since the apf9238 support is in the mainline kernel, we can bump to
kernel 3.17.2.

The patches can be removed because:

 - linux-3.1.1-0001-fixes_arm_mach-types_for_apf9328.patch is no
   longer needed, since the machine number for apf9328 is now
   upstream.

 - linux-3.1.1-0002-add_missing_config_option_for_apf9328.patch is no
   longer needed, because the MTD_CFI_INTELEXT option is selected by
   the imx_v4_v5_defconfig.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/apf9328: use default gcc version

The gcc 4.4 version has been deprecated recently, so we cannot use it
anymore. Since this platform is just using a normal ARM processor with
nothing special, we can expect the default gcc version to just work.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/apf9328: don't use sstrip

There is no reason in a defconfig to select sstrip specifically, so
let's get rid of it.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tcpdump: fix static build

Commit 746116d1eb2e (tcpdump: use libpcap shared library) broke static build
of tcpdump, because its configure script doesn't take into account indirect
dependencies of libpcap. Add these dependencies to the LIBS configure
parameter.

Fixes:
http://autobuild.buildroot.net/results/fd231d34e4bb0306609b021e9e74eb862b7bd6bd/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

aircrack-ng: security bump to version 1.2-rc1

Fixes:
CVE-2014-8321 - gps_tracer stack overflow
CVE-2014-8322 - tcp_test length parameter inconsistency
CVE-2014-8323 - buddy-ng missing check in data format
CVE-2014-8324 - net_get missing check for invalid values

Previous CVE patch dropped since the fix is upstream.
Also add hash file.

Drop iw runtime dep since it's only one of many required by airmon-zc (a
script) which require a ton of conditionals for just that tool.
It will tell somewhat nicely if they're missing. These would be:

awk - from busybox or gawk
ethtool
grep - from busybox or grep
ip or ifconfig - from busybox, iproute2 or net-tools
iw
lspci - from pciutils (needs full variant)
lsusb - from usbutils (needs full variant)
modprobe/modinfo - from busybox or kmod
uname - from busybox or coreutils

[Peter: drop double -lpthread from sqlite conditional]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

zeromq: security bump to version 4.0.5

Fixes:
CVE-2014-7202 - stream_engine.cpp in libzmq (aka ZeroMQ/C++)) 4.0.5
before 4.0.5 allows man-in-the-middle attackers to conduct downgrade
attacks via a crafted connection request.
CVE-2014-7203 - libzmq (aka ZeroMQ/C++) 4.0.x before 4.0.5 does not
ensure that nonces are unique, which allows man-in-the-middle attackers
to conduct replay attacks via unspecified vectors.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/manual: cleanup github helper docs

Explicitly state that the github helper should not be used when there is
a release tarball.

Properly render the list by separating it from the previous paragraph.

[Peter: fix typo as pointed out by Maxime]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

alsa-utils: fix linking with intl

alsa-utils needs to link with intl if the toolchain needs gettext and
locale is set. Otherwise we will see an error like this one:

alsamixer-cli.o: In function `main':
cli.c:(.text.startup+0x4d): undefined reference to `libintl_textdomain'
cli.c:(.text.startup+0xc1): undefined reference to `libintl_gettext'
cli.c:(.text.startup+0xd5): undefined reference to `libintl_gettext'
cli.c:(.text.startup+0xe9): undefined reference to `libintl_gettext'
cli.c:(.text.startup+0x1fd): undefined reference to `libintl_gettext'
cli.c:(.text.startup+0x223): undefined reference to `libintl_gettext'

Fixes:
  http://autobuild.buildroot.net/results/707/707016a2490fc97b98d17e2b6a9c6423a56bb4a9/

[Peter: correct autobuilder reference]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

nodejs: disable ssl2 and ssl3 when openssl is not built

The nodejs version 0.10.33 is compiled with SSLv2 and SSLv3 protocol
support by default so it fails to build if the package openssl was not
built.

To fix this build failure disable SSLv2 and SSLv3 protcol suppport if
the openssl package is not built.

Fixes:
  http://autobuild.buildroot.net/results/e1fb34818ff1167aa008b4011befb9fd14c81293
  http://autobuild.buildroot.net/results/8b72b0c311f2f7f7430aca5f7cca1f7d82d1c213
  http://autobuild.buildroot.net/results/e5f87dc635e0e6a6d1cc234529a433e12d810097
  http://autobuild.buildroot.net/results/3c4a5be556cfbd0d0e632757887ebc2f1de64bba

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

util-linux: re-enable libmount and binaries on Microblaze

In commit 442aa88f95d6c4a921aa3d4de91f54d50bd0cd35 ("util-linux: bump
version and revamp options"), Gustavo disabled util-linux libmount and
binaries on microblaze, as it was not building properly.

However, as mentionned in the comment, these options were disabled on
Microblaze due to "libc lacks UTIME_NOW & UTIME_COMMIT for
libmount". This was true specifically for the microblaze external
toolchain that we were using at the time. But we are no longer using
this external toolchain (which proved to be broken in many ways), and
have microblaze support in our internal backend.

I have verified that with our internal toolchain, util-linux with
libmount and the binaries enabled builds fine.

Those options are not selected by anything else in Buildroot, so
there's no other package impacted by this dependency change.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mpd: bump to version 0.19.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain-external: update Linaro toolchains

Bump the ARM, ARMeb and AArch64 Linaro toolchains from 14.08 to
14.09. We can't bump to 14.10, because they completely changed the
toolchains and they are now completely broken: they switched from
Crosstool-NG to a new build tool to generate the toolchain, and now
the sysroot handling is completely borked.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

rt-tests: bump version to 0.89

With this change we're moving to the latest version of rt-tests.

Existing patches were updated so they apply on sources without errors and
warnings.

In "01-fix-build-system.patch" CFLAGS substitution was removed because
now external CFLAGS are accepted:
http://git.kernel.org/cgit/linux/kernel/git/clrkwllms/rt-tests.git/commit/?id=dfcef6e557b7980a33aa30b45bde196ed1780eb1

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

rt-tests: switch site from Debian snapshot to Linux's git

Origin of "rt-tests" is:
git://git.kernel.org/pub/scm/linux/kernel/git/clrkwllms/rt-tests.git

Switching to this new "origin" simplifies version bumping because there's
no need in updating Debian snapshot folder as it was done already here:
http://git.buildroot.net/buildroot/commit/package/rt-tests?id=da330e508c2d95e898ac52a2aa39426a5f6d0506

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

rt-tests: rename patch to the new convention

As a preparation to the introduction of an additional patch to rt-tests,
let's rename the existing patch to the new naming convention.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libgtk3: bump version to 3.14.5

- Bump version to 3.14.5
- Add a hash file
- Add a new patch to fix a regression

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libgtk3: rename patches to follow the new name structure

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

pciutils: bump to version 3.3.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wireless-regdb: bump to version 2014.11.07

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dhcp: fix bad --enable/disable-debug logic

It interprets disable as enable and wreaks havoc since it changes the
behaviour of the build, for instance not using configured leases files
paths.
Thanks to Nathaniel Roach for pointing me to this problem.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Nathaniel Roach <nroach44@gmail.com>
Tested-by: Nathaniel Roach <nroach44@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

rt-tests: allow building subset of tests with non-NPTL toolchains

Some architectures are still stuck with non-NPTL toolchains.
These are for example ARC, Blackfin, Xtensa etc.

Still rt-tests are very good benchmarks and it would be good to enable use of
at least selected (those that will be built) tests on those architectures.

This change makes it possible to only build subset of tests that don't require
NPTL calls.

Following tests will be built with non-NPTL toolchain:
 * signaltest
 * ptsematest
 * sigwaittest
 * svsematest
 * sendme
 * hackbench

Still it's required to have a toolchain with threads support because most of
mentioned tests use threads.

03-fix-non-nptl-buil.patch was submitted upstream:
https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg762958.html
so as soon as it is accepted with the next version bump this patch should be
removed.

[Thomas: fix the rt-tests.mk test on NPTL to use positive logic.]

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gnutls: security bump to version 3.2.20

Fixes:
CVE-2014-8564 / GNUTLS-SA-2014-5 - Sean Burford reported that the
encoding of elliptic curves parameters GnuTLS 3 is vulnerable to a
denial of service (heap corruption). It affects clients and servers
which print information about the peer's certificate, e.g., the key ID,
and can be exploited via a specially crafted X.509 certificate.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

connman: rename patches to follow the new name structure

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

connman: disable for static builds

It needs dlopen(), otherwise it will fail at the configure phase with a
message like this one:

checking for dlopen in -ldl... no
configure: error: dynamic linking loader is required

Fixes:
  http://autobuild.buildroot.net/results/647/64742a1d3a07f86a7c801da5ef30892c1f760031/

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/ffmpeg: Sync with upstream to fix fminf-related build error

- upstream fixed the fminf build error, use the backported patch now
- renamed patch according to new naming convention

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

quota: fix static linking

The aim of this patch is to fix bug #7574, i.e fix the static linking
of the quota package. It does so by introducing a patch to the quota
build system that generalizes the use of $(LIBS), and then changes
quota.mk to use LIBS instead of LDFLAGS to link against intl and tirpc
when needed.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

quota: remove dependency on util-linux

The dependency on util-linux is only present in Config.in, and not in
quota.mk, and quota indeed builds properly without util-linux. It
could be a runtime dependency, but there is no indication that it is
the case, and I don't see why quota would run-time depend on
util-linux utilities.

Looking back at when the quota package was introduced, in one of the
preliminary patch, he following explanation was given by the original
author:

  [Update: I added check for util-linux mount because
   it support usrquota and grpquota mount options.]

But I still don't see why usrquota and grpquota mount options would be
the source of a dependency of the quota utilities on util-linux. Here
is what the util-linux mount man page says about those two mount
options:

   grpquota|noquota|quota|usrquota

         These options are accepted but ignored.  (However, quota
         utilities may react to such strings in /etc/fstab.)

So indeed, the quota tools will look at /proc/mounts and see if those
options are used for certain mount points, but that doesn't create a
dependency of quota on util-linux.

Therefore, this commit gets rid of the dependency of quota on
util-linux. It allows to re-enable quota on Microblaze, since this
dependency was inherited from util-linux.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

quota: rename patch to the new convention

As a preparation to the introduction of an additional patch to quota,
let's rename the existing patch to the new naming convention.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libv4l: fix utilities build with older glibc versions

Fixes:
http://autobuild.buildroot.net/results/9af/9af37fbf344b63b60e59ccac21e010cdf0ea219e/
http://autobuild.buildroot.net/results/bbd/bbd34d5378354e9db7822eaae8d3c4a75a67ac23/
http://autobuild.buildroot.net/results/ebb/ebbaa70e1a277162ba53c7bde8335ee998486703/
http://autobuild.buildroot.net/results/2c1/2c11f4dbb7cfadcfc6fbc267679b2b4eab867221/

And many more.

The utilities use clock_gettime(), which was provided in librt in glibc <
2.17, so ensure we link against -lrt.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Config.in.legacy: fix typo

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Config.in.legacy: add legacy handling for the recently removed BR2_x86_generic option

Buildroot automatically falls back to a sensible CPU variant, but inform the
user of the change anyway so they are aware of it.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mongoose: bump to version 5.5

- examples/server was renamed examples/web_server
 - patch was submitted and included upstream so we can drop it

Signed-off-by: Davide Viti <zinosat@tiscali.it>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/dovecot: Adjust LIBDOVECOT in dovecot-config to STAGING_DIR

Fixes
http://autobuild.buildroot.net/results/3e6/3e6c258d7636fedbb87ba62069094291666e6a85/
http://autobuild.buildroot.net/results/410/410b68afece06ddb03a00245cfdc3de4d9a4e5f1/
http://autobuild.buildroot.net/results/bd3/bd37ee92eeb00adb1558dbb61315465a0cdfe635/
http://autobuild.buildroot.net/results/fd1/fd18c3678eded431476b4e61a10c48e160ffd51a//
and many others

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/dovecot: Fix build error in SQLite module

Patch occured with "make dovecot" using this defconfig:
http://autobuild.buildroot.net/results/bd3/bd37ee92eeb00adb1558dbb61315465a0cdfe635/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

collectd: drop memcachec from disable list

As it is explicitly handled below. No functional change, but cleaner this way.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libupnpp: bump to version 0.8.6

Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/upmpdcli: bump to version 0.8.6

Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

makedevs: Rework README

Make all the example as a space separated list.
The definition of the different type was modified to look like the same
section on the manual.

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/*/*.mk: Fix indent

Fix indent for LIBFOO_USERS and LIBFOO_PERMISSIONS  as per the manual example.

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lttng-tools: bump version

The previous releases was removed from their servers has they did a
releases from a wrong tag, the resulting binary was wrong.
Thanks to "Yann E. Morin" for spotting that.

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: "Yann E. Morin" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lttng-babeltrace: Bump version

Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

opencv: superres - Fix return value VideoFrameSource_GPU

superres module fails to compile with the following error messages:

[100%] Building CXX object
modules/superres/CMakeFiles/opencv_superres.dir/src/super_resolution.cpp.o
/opencv-2.4.10/modules/superres/src/frame_source.cpp: In function
'cv::Ptr<cv::superres::FrameSource>
cv::superres::createFrameSource_Video_GPU(const string&)':
/opencv-2.4.10/modules/superres/src/frame_source.cpp:263:16: error:
expected type-specifier before 'VideoFrameSource'
/opencv-2.4.10/modules/superres/src/frame_source.cpp:263:16: error:
could not convert '(int*)operator new(4ul)' from 'int*' to
'cv::Ptr<cv::superres::FrameSource>'
/opencv-2.4.10/modules/superres/src/frame_source.cpp:263:16: error:
expected ';' before 'VideoFrameSource'
/opencv-2.4.10/modules/superres/src/frame_source.cpp:263:41: error:
'VideoFrameSource' was not declared in this scope
/opencv-2.4.10/modules/superres/src/frame_source.cpp:264:1: error:
control reaches end of non-void function [-Werror=return-type]
cc1plus: some warnings being treated as errors
make[3]: ***
[modules/superres/CMakeFiles/opencv_superres.dir/src/frame_source.cpp.o]
Error 1
make[3]: *** Waiting for unfinished jobs....

This is caused because the return value of the
createFrameSource_Video_GPU function should be a VideoFrameSource_GPU
object.

Backporting an upstream patch to fix this problem in Buildroot:
  https://github.com/Itseez/opencv/commit/2e393ab83362743ba1825ad4b31d4a2925c606b4

Fixes:
  http://autobuild.buildroot.net/results/b09/b0996267197a9016d29d6070804ebc0cb7853548/

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

opencv: rename patches to follow the new name structure

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/clamav: add hash

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-netifaces: bump to 0.10.4

Change download location and remove obsolete patch.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libiscsi: only build the test tool and ld-iscsi if we have shared libs

Backporting an upstream patch to fix a failure when doing a static
build:

/br/output/host/usr/bin/mipsel-ctng-linux-uclibc-gcc -shared -o
ld_iscsi.so ld_iscsi.o -ldl
/br/output/host/opt/ext-toolchain/bin/../lib/gcc/mipsel-ctng-linux-uclibc/4.8.2/../../../../mipsel-ctng-linux-uclibc/bin/ld:
ld_iscsi.o: relocation R_MIPS_HI16 against `__gnu_local_gp' can not be
used when making a shared object; recompile with -fPIC
ld_iscsi.o: could not read symbols: Bad value
collect2: error: ld returned 1 exit status

Upstream commit:
  https://github.com/sahlberg/libiscsi/commit/3d6c2be3428d88682cecfa2a4ad172aaacffb318

Fixes:
  http://autobuild.buildroot.net/results/7a9/7a9caf1f4080c2c4b04ee3b13c1240f475a22ea7/

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libiscsi: rename patches to follow the new name structure

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tcl: add hash file

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tcl: update package disabling

Update package disabling (removing pkgs subdirectories) after
latest tcl version update:

$ ls tcl8.6.1/pkgs/
 itcl4.0.0
 sqlite3.8.0
 tdbc1.0.0
 tdbcmysql1.0.0
 tdbcodbc1.0.0
 tdbcpostgres1.0.0
 tdbcsqlite3-1.0.0
 thread2.7.0

$ ls tcl8.6.2/pkgs/
 itcl4.0.1
 sqlite3.8.6
 tdbc1.0.1
 tdbcmysql1.0.1
 tdbcodbc1.0.1
 tdbcpostgres1.0.1
 tdbcsqlite3-1.0.1
 thread2.7.1

Fixes:
 http://autobuild.buildroot.net/results/07ae8e42acf62fef99de70c8099ec5a0ca89a817/

Could not reproduce the build failure, but disabling pkgs/sqlite3.8.6 should
prevent all build failures in this directory...

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/mesa3d: bump to 10.3.3

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/cramfs: Needs zlib

cramfs.mk contains

CRAMFS_DEPENDENCIES = zlib

but this dependency was missing in Config.in.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

vim: install vi symlink

Install a 'vi' symlink to win over busybox vi (more features) and in
case busybox isn't around, for people expecting plain simple 'vi' to
call the editor.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

arptables: re-enable for static

Add a small patch to re-enable arptables for static builds.
The dlfcn.h is a stray include for a past attempt at loadable plugins
but the code is disabled so there's no need for it.

Also add hash file.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/qemu: fix specifying custom target sub-set

The logic was wrong.

Even though it was working for previous versions of QEMU, it changed in
later versions, and thus now breaks on the version we currently package.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

arptables: needs dynamic linking support for dlopen()

Fixes:
http://autobuild.buildroot.net/results/b96/b9642befef82e479cc50839e07114cb87314d156/
http://autobuild.buildroot.net/results/57f/57ffebbe925391badf81f6867fdbf16975b4af6f/
http://autobuild.buildroot.net/results/5f1/5f1966f1a7c8800846a8405b7e74f4893f3fcd14/

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

arch/Config.in.x86: drop BR2_x86_generic

The fuzzy generic x86 variant doesn't make much sense in the context of
Buildroot, and the recent change to use -march instead of -mtune broke it.

From the GCC manual:

https://gcc.gnu.org/onlinedocs/gcc-4.9.2/gcc/i386-and-x86-64-Options.html#i386-and-x86-64-Options:

-mtune=cpu-type
    Tune to cpu-type everything applicable about the generated code,
    except for the ABI and the set of available instructions. While
    picking a specific cpu-type schedules things appropriately for that
    particular chip, the compiler does not generate any code that cannot
    run on the default machine type unless you use a -march=cpu-type
    option. For example, if GCC is configured for i686-pc-linux-gnu then
    -mtune=pentium4 generates code that is tuned for Pentium 4 but still
    runs on i686 machines.

    The choices for cpu-type are the same as for -march. In addition,
    -mtune supports 2 extra choices for cpu-type:

    ‘generic’
        Produce code optimized for the most common IA32/AMD64/EM64T
        processors. If you know the CPU on which your code will run,
        then you should use the corresponding -mtune or -march option
        instead of -mtune=generic. But, if you do not know exactly what
        CPU users of your application will have, then you should use
        this option.

        As new processors are deployed in the marketplace, the behavior
        of this option will change. Therefore, if you upgrade to a newer
        version of GCC, code generation controlled by this option will
        change to reflect the processors that are most common at the
        time that version of GCC is released.

        There is no -march=generic option because -march indicates the
        instruction set the compiler can use, and there is no generic
        instruction set applicable to all processors. In contrast,
        -mtune indicates the processor (or, in this case, collection of
        processors) for which the code is optimized.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>