spirv: Apply OriginUpperLeft to FragCoord

This behaviour was changed in 1e5b09f42f694687ac. The commit message
for that says it is just a “tidy up” so my assumption is that the
behaviour change was a mistake. It’s a little hard to decipher looking
at the diff, but the previous code before that patch was:

  if (builtin == SpvBuiltInFragCoord || builtin == SpvBuiltInSamplePosition)
     nir_var->data.origin_upper_left = b->origin_upper_left;

  if (builtin == SpvBuiltInFragCoord)
     nir_var->data.pixel_center_integer = b->pixel_center_integer;

After the patch the code was:

  case SpvBuiltInSamplePosition:
     nir_var->data.origin_upper_left = b->origin_upper_left;
     /* fallthrough */
  case SpvBuiltInFragCoord:
     nir_var->data.pixel_center_integer = b->pixel_center_integer;
     break;

Before the patch origin_upper_left affected both builtins and
pixel_center_integer only affected FragCoord. After the patch
origin_upper_left only affects SamplePosition and pixel_center_integer
affects both variables.

This patch tries to restore the previous behaviour by changing the
code to:

  case SpvBuiltInFragCoord:
     nir_var->data.pixel_center_integer = b->pixel_center_integer;
     /* fallthrough */
  case SpvBuiltInSamplePosition:
     nir_var->data.origin_upper_left = b->origin_upper_left;
     break;

This change will be important for ARB_gl_spirv which is meant to
support OriginLowerLeft.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Fixes: 1e5b09f42f694687ac "spirv: Tidy some repeated if checks..."

spirv: convert some operands for bitwise shift and bitwise ops to uint32

SPIR-V allows to define the shift, offset and count operands for
shift and bitfield opcodes with a bit-size different than 32 bits,
but in NIR the opcodes have that limitation. As agreed in the
mailing list, this patch adds a conversion to 32 bits to fix this.

For more info, see:

https://lists.freedesktop.org/archives/mesa-dev/2018-April/193026.html

v2:
- src_bit_size will have zero value for variable bit-size operands (Jason).

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

mesa: enable geom shaders in OpenGL 3.2 Compat profile

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radv: UseEnumerateInstanceVersion for the default version.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radv: Don't check the incoming apiVersion on CreateInstance.

This fixes

dEQP-VK.api.device_init.create_instance_invalid_api_version

CC: 18.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radv: Allow vkEnumerateInstanceVersion ProcAddr without instance.

Apparently the somewhere between 1.1.70 and 1.1.73 the loader started
depending on this. The loader then creates a 1.0 instance, which gets
into funny situation because we have a 1.1 device.

No idea how to do line wrapping in Mako though, my random guesses
did not work.

CC: 18.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

intel: aubinator: add an option to limit the number of decoded VBO lines

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

intel: decoder: limit to the number decoded lines from VBO

By default we set no limit, but the debug batch decoder in i965 sets
it to 100.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

anv: Advertise variableMultisampleRate

Initially, I didn't understand this feature.  Turns out that all it
means is that you can switch multisample rates in the middle of a
zero-attachment subpass.  We've been able to do this since forever.

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

nir: add missing dependency in meson.build

nir_builder_opcodes.h also depends on nir_intrinsics.py for generating
the system-value builders.

Reported-by: Christoph Haag <haagch@frickel.club>
Reported-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

radv: fix multisample image copies

Previously before fb077b0728, the LOD parameter was being used in place of the
sample index, which would only copy the first sample to all samples in the
destination image. After that multisample image copies wouldn't copy anything
from my observations.

This fixes some copy_and_blit CTS tests.

v3.1: - set lod to 0 for nir_txf_ms (Samuel)
v2: - use GLSL_SAMPLER_DIM_MS instead of 2D (Samuel)
    - updated commit description (Samuel)

Fix this properly by copying each sample in a separate radv_CmdDraw and using a
pipeline with the correct rasterizationSamples for the destination image.

Cc: 18.0 18.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

intel: Fix 3DSTATE_CONSTANT buffer decoding.

First, this was iterating over the 3DSTATE_CONSTANT_* instruction
but trying to process fields of the 3DSTATE_CONSTANT_BODY substructure.

Secondly, the fields have been called Buffer[0] and Read Length[0],
for a while now, and we were not handling the subscripts correctly.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

intel: fix aubinator include

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 7c22c150c40b3 ("intel: Move batch decoder/disassembler from tools/ to common/")
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Reuse batch decoder infrastructure rather than open coding it.

With the new callback, Jason's newer batch decoder infrastructure
should be able to do just as well as the old open coded INTEL_DEBUG=bat
handling, with much less code.  If there are any limitations, we'd like
to improve the common code rather than doing one-off hacks here.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

intel: Give the batch decoder a callback to ask about state size.

Given an arbitrary batch, we don't always know what the size of certain
things are, such as how many entries are in a binding table.  But it's
easy for the driver to track that information, so with a simple callback
we can calculate this correctly for INTEL_DEBUG=bat.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

intel: Move batch decoder/disassembler from tools/ to common/

Making these part of libintel_common allows us to use them in the DRI
driver.  The standalone tool binaries already link against the common
library, too, so it's no harder for them.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

i965: Allocate shadow batches to explicitly be the BO size.

This unfortunately makes it malloc/realloc on every new batch, rather
than once at startup.  But it ensures that the shadow buffer's size will
absolutely match the BO size.  Otherwise, as we tune BATCH_SZ/STATE_SZ
or bufmgr cache bucket sizes, we may get a BO size that's rounded up,
and fail to allocate the shadow buffer large enough.

This doesn't fix any bugs today, as BATCH_SZ/STATE_SZ are the size of
a cache bucket, but it's better to be safe than sorry.

Reported-by: James Xiong <james.xiong@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

intel: batch-decoder: iterate VERTEX_BUFFER_STATE fields

The gen_field_iterator only iterates the fields of a given gen_group.
If we want to iterate the fields of another gen_group contained as
field, we need to do it manually.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

intel: decoder: fix starting dword of struct fields

Struct fields might span several dwords, but iter_dword is incremented
up to the last dword of the current field before we print out the
struct's fields. We can't use iter_dword for computing the offset into
the pointer of data to decode.

v2: Fix displayed offset number (Ken)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

intel: decoder: document when fields should be used

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

intel: decoder: identify groups with fixed length

<register> & <struct> elements always have fixed length. The
get_length() method implies that we're dealing with an instruction in
which the length is encoded into the variable data but the field
iterator uses it without checking what kind of gen_group it is dealing
with.

Let's make get_length() report the correct length regardless of the
gen_group (register, struct or instruction).

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

intel: decoder: make the field iterator use more natural

while (iter_next()) { ... }

instead of

do { ... } while (iter_next());

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

nv50: Extract needed value bits without shifting them before calling bitcount

This can save one instruction since bitcount doesn't care about specific
bits' positions.

Reviewed-by: Karol Herbst <kherbst@redhat.com>

intel: activate the gl_BaseVertex lowering

Surplus code related to the basevertex is removed.

The Vertex Elements contain now:
* VE 1: <firstvertex, BaseInstance, VertexID, InstanceID>
* VE 2: <DrawID, is_indexed_draw, 0, 0>

Also fixes unreachable message.

Fixes OpenGL CTS tests:
* KHR-GL46.shader_draw_parameters_tests.ShaderDrawArraysInstancedParameters
* KHR-GL46.shader_draw_parameters_tests.ShaderMultiDrawArraysParameters
* KHR-GL46.shader_draw_parameters_tests.MultiDrawArraysIndirectCountParameters
* KHR-GL46.shader_draw_parameters_tests.ShaderDrawArraysParameters
* KHR-GL46.shader_draw_parameters_tests.ShaderMultiDrawArraysIndirectParameters

Fixes Piglit tests:
* arb_shader_draw_parameters-drawid-indirect baseinstance
* arb_shader_draw_parameters-basevertex

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102678

compiler/nir: Add conditional lowering for gl_BaseVertex

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

intel: emit is_indexed_draw in the same VE than gl_DrawID

The Vertex Elements are now:
* VE 1: <BaseVertex/firstvertex, BaseInstance, VertexID, InstanceID>
* VE 2: <DrawID, is-indexed-draw, 0, 0>

VE1 is it kept as it was before, VE2 additionally contains the new
system value.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

intel/compiler: Add uses_is_indexed_draw flag

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

compiler: Add SYSTEM_VALUE_IS_INDEXED_DRAW and instrinsics

This VS system value contains if the draw command used to start the
rendering was an indexed draw command or a non-indexed one
(~0/0 respectively). Useful to calculate the gl_BaseVertex as:
(SYSTEM_VALUE_IS_INDEXED_DRAW & SYSTEM_VALUE_FIRST_VERTEX).

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

radv: enable out-of-order rasterization by default

As the implementation is conservative, we can now enable it
by default. It can be disabled with RADV_DEBUG=nooutoforder.

Don't expect much more than 1% of improvements, but the gain
seems consistent.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: only disable out-of-order rast for perfect occlusion queries

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

i965: Drop unused gen5 sampler default color struct.

Trivial.

i965: Make brw_vs_outputs_written static.

Drop a prototype.  Trivial.

i965/tex_image: Avoid the ASTC LDR workaround on gen9lp

Both the internal documentation and the results of testing this in the
CI suggest that this is unnecessary. Add the fixes tag because this
reduces an internal benchmark's startup time by about 17 seconds
(reported by Eero).

Fixes: 710b1d2e665 "i965/tex_image: Flush certain subnormal ASTC channel values"
Tested-by: Eero Tamminen <eero.t.tamminen@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

freedreno: Fix ir3_cmdline.c build.

Fixes: 6487e7a30c9e ("nir: move GL specific passes to src/compiler/glsl")
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>

anv: Allow lookup of vkEnumerateInstanceVersion without an instance

Fixes: cbab2d1da5edfe9df27a010adf8b1aa9dbee473b
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

anv: Don't advertise Float64 or Int64 on HW without 64-bit types

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

radv: compute the number of subpass attachments correctly

Only count color attachments twice if resolves are used, also
account for the depth stencil attachment if present.

Cc: 18.0 18.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radv: set fmask_surf_index on fmask surfaces.

This is needed for gfx9 and later for all fmask surface index.

(Mentioned by Marek on irc)

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

gallium/i915: fix PIPE_CAPF_MIN_CONSERVATIVE_RASTER_DILATE typo

Fixes: fffe5e2d14f807c ("gallium: add initial support for conservative
rasterization")
Trivial.

nvc0: add conservative rasterization support

Subpixel precision bias, dilation and the post-snap mode are supported on
GM200 and newer. The pre-snap mode is supported for triangle primitives on
GP100.

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

st/mesa: add support for nvidia conservative rasterization extensions

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

gallium: add initial support for conservative rasterization

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: add support for nvidia conservative rasterization extensions

Although the specs are written against compatibility GL 4.3 and allows core
profile and GLES2+, it is exposed for GL 1.0+ and GLES1 and GLES2+.

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

glsl/tests: add GLSL_TYPE_UINT8, GLSL_TYPE_INT8 cases to switch statements

To silence warnings about unhandled switch values.
Untested otherwise.

v2: move the INT/UINT8 cases after the INT/UINT16 cases, per Eric.

Reviewed-by: Eric Anholt <eric@anholt.net>

tgsi: use enums instead of unsigned in ureg code

Reviewed-by: Charmaine Lee <charmainel@vmware.com>

nir: move GL specific passes to src/compiler/glsl

With this we should have no passes in src/compiler/nir with any
dependencies on headers from core GL Mesa.

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>

radv/winsys: fix leaking resources from bo's imported by fd

A bo's ref_count was not being initialized when imported from an fd.
Therefore, we would fail to free the resource during VkFreeMemory().

This patch fixes applications like hifi VR in threaded mode, which
perform frequent imports/releases of IPC shared memory.

Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
CC: 18.0 18.1 <mesa-stable@lists.freedesktop.org>

i965/tiled_memcpy: ytiled_to_linear a cache line at a time

Similar to the transformation applied to linear_to_ytiled, also align
each readback from the ytiled source to a cacheline (i.e. transfer a
whole cacheline from the source before moving on to the next column).
This will allow us to utilize movntqda (_mm_stream_si128) in a
subsequent patch to obtain near WB readback performance when accessing
the uncached ytiled memory, an order of magnitude improvement.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Record mipmap resolver for unmapping

When mapping a region of the mipmap_tree, record which complementary
method to use to unmap it afterwards. By doing so we can avoid
duplicating the decision tree used when mapping and thereby eliminate
trivial errors that can be introduced if the two if-chains become out of
sync.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Move unmap_depthstencil before map_depthstencil

Reorder code to avoid a forward declaration in the next patch.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Move unmap_etc before map_etc

Reorder code to avoid a forward declaration in the next patch.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Move unmap_s8 before map_s8

Reorder code to avoid a forward declaration in the next patch.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Move unmap_movntdqa before map_movntdqa

Reorder code to avoid a forward declaration in the next patch.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Move unmap_blit before map_blit

Reorder code to avoid a forward declaration in the next patch.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Move unmap_gtt before map_gtt

Reorder code to avoid a forward declaration in the next patch.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

ac/nir: expand 64-bit vec3 loads to fix shuffling.

If loading 64-bit vec3 values, a 4 component load would be followed
by a 2 component load and the resulting shuffle would fail as it
requires 2 4 components. This just expands the second results
vector out to 4 components.

This fixes 100 CTS tests:
dEQP-VK.spirv_assembly.type.vec3.*64*

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

i965: Don't stomp initial kflags for program cache.

We want to flag EXEC_OBJECT_CAPTURE, but we ought to preserve any
existing kflags.  Today, there are none (as the program cache doesn't
support 48-bit addressing), but once we start using softpin, we'll
need to preserve EXEC_OBJECT_PINNED.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

i965: Let batchbuffers be placed anywhere in the 48-bit address space.

We were trying to mark batch buffers with EXEC_OBJECT_CAPTURE, and
accidentally stomped EXEC_OBJECT_SUPPORTS_48B_ADDRESS in the process.

There's no reason to restrict batch buffers to the lower 4GB.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

intel: fix check for 48b ppgtt support

The previous logic of the supports_48b_addresses wasn't actually
checking if i915.ko was running with full_48bit_ppgtt. The ENOENT
it was checking for was actually coming from the invalid context
id provided in the test execbuffer.  There is no path in the
kernel driver where the presence of
EXEC_OBJECT_SUPPORTS_48B_ADDRESS leads to an error.

Instead, check the default context's GTT_SIZE param for a value
greater than 4 GiB

v2 (Ken): Fix in i965 as well.
v3 Check GTT_SIZE instead of HAS_ALIASING_PPGTT (Chris Wilson)

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

st/omx/enc: fix blit setup for YUV LoadImage

The blit here involves scaling since it's copying from I8 format to R8G8 format.
Half of source will be filtered out with PIPE_TEX_FILTER_NEAREST instruction, it
looks that GPU always uses the second half as source. Currently we use "1" as
the start point of x for R, then causing 1 source pixel of U component shift to
right. So "-1" should be the start point for U component.

Cc: 18.0 18.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

autotools, meson: bump up required VA version

Due using a new VP9 config we use, required VA API 0.39

Fixes: 413c5ca3727 ("travis: update libva required version")
CC: 18.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

docs: update calendar, add news and link release notes to 18.0.2

Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>

docs: add sha256 checksums for 18.0.2

Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
(cherry picked from commit b3eed3ad03fd1eb61474cd0a8a173ad40fb8a876)

docs: add release notes for 18.0.2

Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
(cherry picked from commit d38da7bd2d4387635fac8bc7f45e64f50dc43c43)

radeonsi: increase the number of compiler threads depending on the CPU

The compiler queue was limited to 3 threads, so shader-db running
on a 16-thread CPU would have a bottleneck on the 3-thread queue.

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Tested-by: Benedikt Schemmer <ben at besd.de>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: avoid a crash in gallivm_dispose_target_library_info

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Tested-by: Benedikt Schemmer <ben at besd.de>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: move data_layout into si_compiler

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Tested-by: Benedikt Schemmer <ben at besd.de>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: move passmgr into si_compiler

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Tested-by: Benedikt Schemmer <ben at besd.de>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: move target_library_info into si_compiler

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Tested-by: Benedikt Schemmer <ben at besd.de>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: use si_compiler::triple in si_llvm_optimize_module

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Tested-by: Benedikt Schemmer <ben at besd.de>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: add triple into si_compiler

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Tested-by: Benedikt Schemmer <ben at besd.de>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: add struct si_compiler containing LLVMTargetMachineRef

It will contain more variables.

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Tested-by: Benedikt Schemmer <ben at besd.de>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: rename r600_texture::resource to buffer

r600_resource could be renamed to si_buffer.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: use r600_resource() typecast helper

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: remove unused atom parameter from si_atom::emit

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: inline 2 trivial state structures

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: remove function si_init_atom

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: remove si_atom::id

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: don't use an indirect table for state atoms

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: rename r600_atom -> si_atom

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: remove r600_pipe_common.h

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi/gfx9: workaround for INTERP with indirect indexing

and clean up the conditions.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Cc: 18.0 18.1 <mesa-stable@lists.freedesktop.org>

radeonsi: rewrite DCC format compatibility checking code

It might be better to use a slow compressed clear when clearing to 1.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: implement DCC fast clear swizzle constraints more accurately

Reduce swizzle constraints to the ALPHA_IS_ON_MSB constraint and the clear
value of 1.

This significantly changes the DCC fast clear code, and fixes fast clear
for RGB formats without alpha.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: rename variables and document stuff around DCC fast clear

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: fully enable 2x DCC MSAA for array and non-array textures

The clear code is exactly the same as for 1 sample buffers -
just clear the whole thing.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: enable fast color clear for level 0 of mipmapped textures on <= VI

GFX9 is more complicated and needs a compute shader that we should just
copy from amdvlk.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

ac/surface: handle DCC subresource fast clear restriction on VI

v2: require the previous level to be clearable for determining whether
    the last unaligned level is clearable

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

swr/rast: No need to export GetSimdValidIndicesGfx

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr/rast: Small editorial changes

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr/rast: Use new processor detection mechanism

Use specific avx512 selection mechanism based on avx512er bit instead of
getHostCPUName().  LLVM 6.0.0 has a bug that reports wrong string for KNL
(fixed in 6.0.1).

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr/rast: Output rasterizer dir to console since it's process specific

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr/rast: Add TranslateGfxAddress for shader

Also add GFX_MEM_CLIENT_SHADER

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr/rast: jit PRINT improvements.

Sign-extend integer types to 32bit when specifying "%d" and add new %u
which zero-extends to 32bit. Improves  printing of sub 32bit integer types
(i1 specifically).

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr/rast: Fix regressions.

Bump jit cache revision number to force recompile.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr/rast: Cleanup old cruft.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr/rast: Package events.proto with core output

However only if the file exists in DEBUG_OUTPUT_DIR. The expectation is
that AR rasterizerLauncher will start placing it there when launching
a workload (which is in a subsequent checkin)

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr/rast: Fix init in EventHandlerWorkerStats

Make sure we initialize variables.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr/rast: Fix return type of VCVTPS2PH.

expecting <8xi16> return.

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr/rast: WIP Translation handling

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>