configs/beelink_gs1: bump to U-Boot 2020.01

The U-boot patch has been upstreamed.

Bump U-boot version and drop the patch.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/beelink_gs1: bump to ATF v2.2

The WDT workaround patch has been upstreamed.

Bump to the new ATF version and drop the patch.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ogre: fix build with RELRO

Fixes:
 - http://autobuild.buildroot.org/results/b64dfcd8e576666e8a4a52da81a2f5a92b779dc7

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mbuffer: new package

Signed-off-by: Mircea Gliga <gliga.mircea@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mariadb: patch mariadb_config to add sysroot path

This patch adds @CMAKE_SYSROOT@ to mariadb_config.c.in. Without it,
mariadb_config and mysql_config incorrectly returns host paths for
include paths and library paths.

The patch has been accepted upstream at
https://github.com/mariadb-corporation/mariadb-connector-c/commit/b787c0d69cc00af98cd4ee5bc205e1c7ddaf427a

Reported-by: Alexey Lukyanchuk <skif@skif-web.ru>
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libmad: switch to debian to fix CVEs

Upstream libmad is dead since 2004 so switch to debian package to get
two patches that fix the following CVEs:
 - CVE-2017-8372: The mad_layer_III function in layer3.c in Underbit MAD
   libmad 0.15.1b, if NDEBUG is omitted, allows remote attackers to
   cause a denial of service (assertion failure and application exit)
   via a crafted audio file.
 - CVE-2017-8373: The mad_layer_III function in layer3.c in Underbit MAD
   libmad 0.15.1b allows remote attackers to cause a denial of service
   (heap-based buffer overflow and application crash) or possibly have
   unspecified other impact via a crafted audio file.
 - CVE-2017-8374: The mad_bit_skip function in bit.c in Underbit MAD
   libmad 0.15.1b allows remote attackers to cause a denial of service
   (heap-based buffer over-read and application crash) via a crafted
   audio file.

Moreover:
 - Remove third patch (replaced by optimize.diff debian patch)
 - Remove fourth patch (same patch than
   Provide-Thumb-2-alternative-code-for-MAD_F_MLN.diff)
 - Remove fifth patch (same patch than libmad.thumb.diff)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libid3tag: switch to debian to fix CVEs

Upstream libid3tag is dead since 2004 so switch to debian to get two
patches that fix the following CVEs:
 - CVE-2004-2779: id3_utf16_deserialize() in utf16.c in libid3tag
   through 0.15.1b misparses ID3v2 tags encoded in UTF-16 with an odd
   number of bytes, triggering an endless loop allocating memory until
   an OOM condition is reached, leading to denial-of-service (DoS).
 - CVE-2017-11550: The id3_ucs4_length function in ucs4.c in libid3tag
   0.15.1b allows remote attackers to cause a denial of service (NULL
   Pointer Dereference and application crash) via a crafted mp3 file.
 - CVE-2017-11551: The id3_field_parse function in field.c in libid3tag
   0.15.1b allows remote attackers to cause a denial of service (OOM)
   via a crafted MP3 file.

Moreover, drop patch (replaced by add-m4-directory.patch debian patch)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/libcoap: properly enable DTLS support

The DTLS support needs either gnutls or openssl, so let's have these
packages as optional dependencies. We prefer gnutls over openssl as
done by upstream in their configure.ac when the user does not provide
any option (which is the case currently)

While there is support for tinydtls, and Buildroot has a tinydtls
package, libcoap is only able to use its own internal library, and
only when static linking is enabled, so we simply disable the use of
tinydtls altogether.

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-snappy: new package

Python library for the snappy compression library from Google.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-cbor2: new package

Pure Python CBOR (de)serializer with extensive tag support.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/snappy: bump to version 1.1.8

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-argon2-cffi: new package

The secure Argon2 password hashing algorithm.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-canopen: new package

A Python implementation of the CANopen standard.

Signed-off-by: Attila Wagner <attila.wagner@onyxinsight.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rabbitmq-server: bump version to 3.8.2

RabbitMQ now depends on Elixir for the build system.
The log directory is required for the server to start with the default
configuration. This behaviour was changed in v3.7 with the move to erlang-lager
as the logging library.

License changes:
- LICENSE: Added clarification about the licensing of a number of included
  dependencies and a URL changed to HTTPS. License remains MPL-1.1
- LICENSE-BSD-base64js: URL changed to https (license text is actually MIT)
- LICENSE-MIT-Flot: year update
- LICENSE-MIT-JQuery164: URL changed to https
- LICENSE-MPL-RabbitMQ: URL changed to https, year update
- LICENSE-MPL2: URL changed to https

Removed licenses:
- LICENSE-APL2-Rebar: Removed dependency
- LICENSE-BSD-gl-Matrix: Removed dependency
- LICENSE-ERL-OTP: Removed license
- LICENSE-MIT-Mochiweb: Removed dependency
- LICENSE-MIT-SockJS: Removed dependency

New licenses:
- LICENSE-APACHE2-excanvas: new bundled dependency (Apache 2)
- LICENSE-BSD-recon: new bundled dependency (BSD 3-clause)
- LICENSE-erlcloud: new bundled dependency (BSD 2-clause)
- LICENSE-httpc_aws: new bundled dependency (BSD 3-clause)
- LICENSE-ISC-cowboy: new bundled dependency (ISC)
- LICENSE-MIT-EJS: new bundled dependency (MIT)
- LICENSE-MIT-Erlware-commons: license was present in 3.6.6 but not included in
  the list
- LICENSE-MIT-jQuery: new bundled dependency (MIT)
- LICENSE-MIT-Sammy: new bundled dependency (MIT)
- LICENSE-rabbitmq_aws: new bundled dependency (BSD 3-clause)

Signed-off-by: Frank Vanbever <frank.vanbever@essensium.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rabbitmq-server: clean up license list

Moving the licenses to a single file name per line and ensuring
they're in alphabetical order makes it easier to see what changed in
case these licenses change.

Signed-off-by: Frank Vanbever <frank.vanbever@essensium.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/meson: make pkg-config --static aware

Our pkg-config wrapper is not used since commit
4e0bc29993376613d200e892d491e31ea5a49622, this raise static build
failures with libglib2 because --static is not passed anymore to
pkg-config so add a patch to get back the old behaviour.

The patch was proposed upstream
https://github.com/mesonbuild/meson/pull/6629, and the feedback was
not very positive. However, we need a solution that works for
Buildroot now, and this proposal is simple enough.

Fixes:

  http://autobuild.buildroot.org/results/0d36952def63cb69628697fa6408aeb6ce10cb5b

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libargon2: bump to version 20190702

- There is no incompatibility of this version with php, the issue was
  due to libargon2 itself that installs library to lib/x86_64-linux-gnu
  on Linux x86_64 host since
  https://github.com/P-H-C/phc-winner-argon2/commit/d3639142fa71f8095ee36e64068f71b3c97baf6d
- Update indentation of hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/wget: add optional dependency to libiconv

wget has an optional dependency to libiconv:
http://git.savannah.gnu.org/cgit/wget.git/tree/configure.ac#n344

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/systemd: add fdisk support

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/systemd: add gnutls support

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/systemd: add openssl support

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/systemd: add p11-kit support

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/systemd: enable nss-mymachines when machined is enabled

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/systemd: enable nss-resolve when resolve is enabled

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/systemd: enabled dnssec when available

When libgcrypt is available set default-dnssec to the backwards
compatible allow-downgrade option.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/systemd: add homed support

systemd-homed is a system service that may be used to create, remove,
change or inspect home directories.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Thomas:
  - add missing dependency on kernel headers >= 4.12
  - add missing Config.in comment about dependency]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/jpeg-turbo: allow installing tools

Currently, the jpeg-turbo tools are forcibly removed, but they can be
usefull (e.g. to test performance on the target, or to script batch
conversions).

Add an option to allow keeping them.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
[yann.morin.1998@free.fr
  - move the option out of the choice
  - move the option to a Config.in.options
  - drop the default 'n', which is ... the default
  - use positive logic to define the hook
  - move definition of the hook in the conditional block
  - don't indent the hook assignment
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/jpeg: properly indent in menuconfig

Since there is a variable definition between the definition of
BR2_PACKAGE_JPEG and the choice depending on it, the choice is
not indented bewlo the "jpeg support" prompt, like we like to
have:

    [*] jpeg support
        jpeg variant (jpeg-turbo)  --->

Move the BR2_PACKAGE_JPEG right before the choice (really, move
BR2_PACKAGE_JPEG_SIMD_SUPPORT before BR2_PACKAGE_JPEG, but diff
finds the move of BR2_PACKAGE_JPEG is smaller to display):

    [*] jpeg support
          jpeg variant (jpeg-turbo)  --->

Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

support/scripts/pkg-stats: add tilde '~' expansion for pathes

When the 'nvd-path', 'json' and 'html' are used like this:

  --html ~/foo

then the tilde expansion is properly done by the shell. However, when
they are used like this:

  --html=~/foo

The shell doesn't do the tilde expansion, and pkg-stats doesn't do
it. This commit modifies pkg-stats to ensure that tilde expansion is
done when parsing the 'nvd-path', 'json' and 'html' arguments.

Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[Thomas: improve commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/lua: allow host-lua to find installed modules

We need to set LUA_ROOT to allow the host-lua interpreter to find
installed modules.

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/lua: allow to load native modules from host-lua

In order to allow the host Lua interpreter to load native modules, we
need to enable building liblua.so, by switching from BUILDMODE=static
to BUILDMODE=dynamic.

In addition, since some modules need Lua 5.2 functions, we build the
host Lua interpreter with -DLUA_COMPAT_5_2, when the Lua interpreter
version is 5.3. Note that we are testing the target option
BR2_PACKAGE_LUA_5_3, but this is OK: the host and target Lua
interpreters have the same version.

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pkg-luarocks.mk: add support of host-luarocks-package

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pkg-luarocks.mk: use custom luarocks config file

In preparation for the addition of the support for host-luarocks
packages, this commit changes the luarocks logic to use a custom
configuration file in $(HOST_DIR)/etc/luarocks/config.lua instead of
the default
$(HOST_DIR)/etc/luarocks/config-$(LUAINTERPRETER_ABIVER).lua.

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas: extracted from a larger patch from François]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/linux-firmware: Add Wilocity 6210 11ad firmware

Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/linux-firmware: drop redundant QCA6174 firmware symbol

BR2_PACKAGE_LINUX_FIRMWARE_QUALCOMM_6174 is a superset of
BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_10K_QCA6174. Drop the redundant
symbol.

Add the full list of license files to
BR2_PACKAGE_LINUX_FIRMWARE_QUALCOMM_6174.

Add notice_ath10k_firmware-5.txt license file hash.

Cc: Yegor Yefremov <yegorslists@googlemail.com>
Reported-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[yann.morin.1998@free.fr:
  - reorder license files
  - rewrap license files to usual style for multi-line variables
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/gr-osmosdr: bump to 0.2.0

gr-osmosdr is now python3 only, so drop everything related to python2.
python-cheetah is no longer mandatory, so drop this too.

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/p7zip: fix CVE-2018-5996

Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/p7zip: fix CVE-2017-17969

Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/p7zip: fix CVE-2016-9296

Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libhttpparser: bump to version 2.9.4

This includes the following changes:

2343fd6 v2.9.4
714cbb2 Fix ABI breakage
1c02cb9 Correct test name and numbering

And update hash file formatting (2 spaces).

Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/kodi-pvr-vuplus: needs gcc >= 4.9

Since commit 2cc2ae83fca29e3f70a42759a105bb1495831e7e, kodi-pvr-vuplus
has a dependency on json-for-modern-cpp, but the dependency of
json-for-modern-cpp on gcc >= 4.9 was not propagated. Let's fix that.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/open-lldp: bump version to b71bfb87fefb31c4b1a6a7ae351791c90966c3a8

- Switch site to github
- Remove first patch (already in version)
- Update second patch
- Update indentation of hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: test_python_django: use the timeout_multiplier value

As reported by our gitlab runtime test [1] and on the mailing list
[2], the test_python_django is failing due to django server taking a
lot of time to start. Since the django server is started in background
through pexpect, we can't easily wait for the last startup line:

"January 01, 1970 - 00:00:41

Django version 3.0.4, using settings 'testsite.settings'

Starting development server at http://0.0.0.0:1234/

Quit the server with CONTROL-C."

In the failing gitlab job, we don't see such lines.

If we increase a lot the timout, the test passes.

Use timeout_multiplier introduced by [3] in order to adjust the
timeout.

Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/488816222

Tested:
https://gitlab.com/kubu93/buildroot/-/jobs/507458355

[1] https://gitlab.com/buildroot.org/buildroot/-/jobs/488816222
[2] http://lists.busybox.net/pipermail/buildroot/2020-April/279598.html
[3] 6e45e33f27d5ae6fa0ab5aad3f032d886a886037

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gnupg2: bump to version 2.2.20

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mdevd: bump version to 0.1.1.2

Updated license hash due to copyright year bump:
http://git.skarnet.org/cgi-bin/cgit.cgi/mdevd/commit/?id=00b25940f6d0458f45ab36ddaff2a1c6d208b6fa

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/skalibs: bump version to 2.9.2.1

Updated license hash due to copyright year bump:
http://git.skarnet.org/cgi-bin/cgit.cgi/skalibs/commit/?id=3f090bb2fe66f9fd79c75344fa7f03a76ea67e00

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mcelog: bump version to 168

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libinput: bump version to 1.15.5

For details see [1].

[1] https://lists.freedesktop.org/archives/wayland-devel/2020-April/041400.html

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gobject-introspection: bump to version 2.64.1

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libglib2: bump to version 2.64.2

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/pkg-luarocks.mk: prepare infrastructure for host package support

In preparation for the introduction of support for host Luarocks
packages, this commit reworks the luarocks-package infrastructure:

 - A number of variables that were defined in
   package/luarocks/luarocks-br-config.lua are now passed on the
   luarocks command line in $(2)_INSTALL_TARGET_CMDS in
   pkg-luarocks.mk.

 - The LUAROCKS_CFLAGS logic is moved from
   package/luarocks/luarocks.mk to package/pkg-luarocks.mk.

 - The LUAROCKS_RUN_ENV variable is no longer needed, as all details
   are now passed on the luarocks command line in pkg-luarocks.mk.

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mc: bump version to 4.8.24

Changelog: https://midnight-commander.org/wiki/NEWS-4.8.24

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/mc: add optional dependency to gmp

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/luarocks: luajit is now detected automatically by luarocks

Since luarocks commit
https://github.com/luarocks/luarocks/commit/ffab9f32698431bb901b786460e4695806ebcf30,
available since luarocks v3.2.0, LuaJIT is now detected
automatically. It is therefore no longer necessary to explicitly
indicate in lua_interpreter that LuaJIT is used.

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/psplash: add host-gdk-pixbuf mandatory dependency

gdk-pixbuf-csource is needed since
http://git.yoctoproject.org/cgit/cgit.cgi/psplash/commit/?id=f7a354dd7991bda57ab8b26d6491687d777f88da

Fixes:
 - http://autobuild.buildroot.org/results/cb46d93b90ca3b297d0e18fd84796660e20c3a52

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gdb: add support for host-gdb with python3

host-gdb was limited to link only with Python 2 although it's possible
to build Python 3 for host. Add the ability to link with Python 3.

Signed-off-by: Ramon Fried <rfried.dev@gmail.com>
[Thomas: add an option to the choice to not have Python support]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/qt5: bump version to 5.14.2

qt5base:
 - rebased 0002-double-conversion-enable-for-microblaze.patch
 - rebased 0004-double-conversion-enable-for-xtensa.patch

qt5declarative:
 - rebased 0001-qsgtexture-fix-debug-build-with-uclibc.patch

qt5enginio:
 - add 0001-Do-not-use-deprecated-QLinkedList.patch

qt5tools:
 - add 0001-Disable-designer-tool-fixes-configure-error.patch
   ToDo: add proper fix/workaround

qt5webengine:
 - update 3rdparty license hash list and chromium-latest.inc file

qt5webkit:
 - add 0006-configure-remove-legacy-reference-to-qtConfig-mircli.patch

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/qt5: bump version to 5.13.2

qt5canvas3d:
 - removed with 5.13 according to [1]

qt5webengine:
 - remove 0001-pkg_config-Fixes-when-use_sysroot-false.patch
   (taken from upstream [2])
 - update 3rdparty license hash list and chromium-latest.inc file

[1] https://doc.qt.io/qt-5/whatsnew513.html
[2] https://chromium.googlesource.com/chromium/src/+/a8c8396fd20d98666d517c45b358c63736e345ef

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Thomas: add Config.in.legacy entry for qt5canvas3d]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-txaio: drop python 2 support

As of upstream commit 735eb608637e7bbab4082a541ac802cc919fec22,
available since version v20.1.1, support for Python 2.x has been
dropped, and Python >= 3.5 is required. So we make python-txaio depend
on python3, and remove the python2 test of python-txaio.

We also remove the python-six dependency which is no longer used by
txaio, since upstream commit 62b0e7eaa22769687df1de8f57374cb0a42bdc4d.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ffmpeg: add optional dependency to libxcb

ffmpeg 3.3 added optional support for libxcb:
https://git.ffmpeg.org/gitweb/ffmpeg.git/blob/HEAD:/Changelog#l282

This patch ensures a reproducible build of libavdevice.so:

$ readelf -a output/target/usr/lib/libavdevice.so | grep NEEDED
 0x0000000000000001 (NEEDED)             Shared library: [libavfilter.so.7]
 0x0000000000000001 (NEEDED)             Shared library: [libavformat.so.58]
 0x0000000000000001 (NEEDED)             Shared library: [libavcodec.so.58]
 0x0000000000000001 (NEEDED)             Shared library: [libavutil.so.56]
 0x0000000000000001 (NEEDED)             Shared library: [libxcb.so.1]
 0x0000000000000001 (NEEDED)             Shared library: [libxcb-shm.so.0]
 0x0000000000000001 (NEEDED)             Shared library: [libxcb-shape.so.0]
 0x0000000000000001 (NEEDED)             Shared library: [libxcb-xfixes.so.0]
 0x0000000000000001 (NEEDED)             Shared library: [libc.so.0]

compared to

$ readelf -a output/target/usr/lib/libavdevice.so | grep NEEDED
 0x0000000000000001 (NEEDED)             Shared library: [libavfilter.so.7]
 0x0000000000000001 (NEEDED)             Shared library: [libavformat.so.58]
 0x0000000000000001 (NEEDED)             Shared library: [libavcodec.so.58]
 0x0000000000000001 (NEEDED)             Shared library: [libavutil.so.56]
 0x0000000000000001 (NEEDED)             Shared library: [libc.so.0]

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python3: add optional dependency to gettext

Tested using this defconfig:

BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_SYSTEM_ENABLE_NLS=y
BR2_PACKAGE_PYTHON3=y

Without this patch:
$ readelf -a output/target/usr/lib/libpython3.8.so.1.0 | grep NEEDED
 0x00000001 (NEEDED)                     Shared library: [libc.so.0]

With this patch:
$ readelf -a output/target/usr/lib/libpython3.8.so.1.0 | grep NEEDED
 0x00000001 (NEEDED)                     Shared library: [libintl.so.8]
 0x00000001 (NEEDED)                     Shared library: [libc.so.0]

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/imx6-sabresd_qt5: Select LIBV4L_UTILS

Select LIBV4L_UTILS so that camera capture pipelines can be
configured.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/engicam_imx6qdl_icore_qt5: Select MESA3D_OPENGL_EGL

Now that MESA3D_OPENGL_EGL is not automatically selected by the mesa3d
etnaviv driver, explicitly select it in the config file.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/imx6-sabresd_qt5: Select MESA3D_OPENGL_EGL

Now that MESA3D_OPENGL_EGL is not automatically selected by the mesa3d
etnaviv driver, explicitly select it in the config file.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mesa3d: select LIBDRM_FREEDRENO for freedreno

The mesa3d freedreno driver is not usable without the corresponding
libdrm support for this platform, so select LIBDRM_FREEDRENO.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mesa3d: do not select MESA3D_OPENGL_EGL for etnaviv

As suggested by Thomas, BR2_PACKAGE_MESA3D_OPENGL_EGL should not
be automatically selected by the etnaviv driver.

Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-crossbar: add missing runtime dependency on python-werkzeug

Upstream commit
https://github.com/crossbario/crossbar/commit/b9c295d3cfa923b383f93fe534d40e42c56576dc
which has been part of the releases since v19.10.1 has added
werkzeug dependency.

Without werkzeug package, the test TestPythonPy3Crossbar
is failing at runtime with this error:

ModuleNotFoundError: No module named 'werkzeug'

Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/498144523

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-flask-login: bump version to 0.5.0

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-flask-babel: bump version to 1.0.0

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-flask: bump version to 1.1.2

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-flask: update homepage URL

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-flask: remove erroneously python-lxml dependency

Remove erroneously python-lxml dependency (as noted by
Peter Korsgaard).

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/kodi-vfs-sftp: bump version to 1.0.6-Leia

Switch license file to LICENSE.md.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/kodi-vfs-rar: bump version to 2.3.0-Leia

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/kodi-inputstream-adaptive: bump version to 2.4.4-Leia

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ell: fix build with older toolchains

Older toolchains need to include sys/types.h and sys/socket.h before
linux/if.h, RTA_PREF was introduces with linux-4.1.x.

Fixes:

  http://autobuild.buildroot.net/results/2d1/2d1a3f82abb8475d39908b22f775c2dac781f330

  In file included from ell/rtnl.c:28:0:
  .../host/arm-buildroot-linux-gnueabi/sysroot/usr/include/linux/if.h:185:19: error: field 'ifru_addr' has incomplete type
  .../host/arm-buildroot-linux-gnueabi/sysroot/usr/include/linux/if.h:186:19: error: field 'ifru_dstaddr' has incomplete type
  .../host/arm-buildroot-linux-gnueabi/sysroot/usr/include/linux/if.h:187:19: error: field 'ifru_broadaddr' has incomplete type
  .../host/arm-buildroot-linux-gnueabi/sysroot/usr/include/linux/if.h:188:19: error: field 'ifru_netmask' has incomplete type
  .../arm-buildroot-linux-gnueabi/sysroot/usr/include/linux/if.h:189:20: error: field 'ifru_hwaddr' has incomplete type
  ell/rtnl.c: In function 'l_rtnl_route_extract':
  ell/rtnl.c:120:8: error: 'RTA_PREF' undeclared (first use in this function)

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/uftp: bump to version 4.10.2

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-py: bump to version 1.8.1

And use two spaces for indentation in hash file.

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-psutil: bump to version 5.7.0

Add use two spaces for license file hash indentation.

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-fire: bump to version 0.3.1

And use two spaces for license file indentation.

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-cython: bump to version 0.29.16

Add use two spaces for license files indentation.

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/collectd: bump to version 5.11.0

Drop patch (already on upstream).

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/ser2net: bump to version 4.1.6

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gensio: bump to version 2.0.1

Removed patch that is now upstream.

Removed GENSIO_AUTORECONF as we no longer patch configure.ac.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/snps_arc*_defconfig: update linux version

With this commit we update for ARC boards Linux kernel
version to 5.6.3 and Linux headers version to 5.6.

Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/git: bump to version 2.26.0

Update indentation of hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/boinc: set curl-config

Build can fail because boinc uses curl-config that it founds on host:

checking for curl-config... /usr/bin/curl-config
checking for the version of libcurl... 7.47.0
checking for libcurl >= version 7.17.1... yes
checking whether libcurl is usable... no

Fixes:
 - http://autobuild.buildroot.org/results/26ab8024e3ef70b898981763f4ea89b647cc9f4b

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mtdev: bump to version 1.1.6

- Update indentation of hash file (two spaces)
- This bump will fix build with musl 1.2.0

Fixes:
 - http://autobuild.buildroot.org/results/5861dc032ba2d0e092f742674759b39f393a710d

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/freerdp: security bump to version 2.0.0

>From the ChangeLog:
- Fix multiple CVEs: CVE-2020-11521 CVE-2020-11522 CVE-2020-11523
  CVE-2020-11524 CVE-2020-11525 CVE-2020-11526
- Fix multiple other security related issues (#6005, #6006, #6007,
  #6008, #6009, #6010, #6011, #6012, #6013)

- Retrieve official tarball
- Drop patch (already in version)
- libusb is needed for urbdrc channel since
  https://github.com/FreeRDP/FreeRDP/commit/0927d7aa50c76b671b55c33e0f06c950d1f08e9a
- Add a patch to fix build on uclibc
- Update indentation in hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

docs/website: update for 2020.02.1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2020.02.1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 80e565bbebc61bf113bcd3b3475fa27a5127f466)
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/website: update for 2019.11.3

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2019.11.3

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 7d3fc9d795f757f3191750491555495626e3bfdb)
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/website: update for 2019.02.11

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2019.02.11

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 5a6d31c87e1573bc83986471c194b944d7a365b7)
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/assimp: fix musl zlib/zip related compile failure

As assimp fails to use system provided zlib/zip (and is picky
about the provided versions) use assimp contributed one
and backport one part of upstream patch to fix musl compile.

Fixes:

  http://autobuild.buildroot.net/results/4b373ae7d8fd40efe3e2592f94f2d769d6a77669

  In file included from .../assimp-5.0.1/code/3MF/D3MFExporter.cpp:61:
  .../assimp-5.0.1/contrib/zip/src/zip.h:30:15: error: conflicting declaration 'typedef long int ssize_t'
   typedef long  ssize_t;  /* byte count or error */
                 ^~~~~~~

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/fmt: bump version to 6.2.0

Added upstream commit to fix Kodi build error.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/stellarium: bump version to 0.20.0

Added upstream commit to fix build error.
Switched to sha256 hash provided by upstream.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/v4l2loopback: bump to version 0.12.4

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/subversion: bump to version 1.13.0

- Update site to get latest release
- Update indentation of hash file (two spaces)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>