Add support for decoding the DW_MACRO_define_strx and DW_MACRO_undef_strx operands found in DWARF-5 .debug_macro sections.

PR 26112
* dwarf.c (display_debug_str_offsets): Add code to display the
contents of the .debug_str_offsets section.
(display_debug_macro): Add support for DW_MACRO_define_strx and
DW_MACRO_undef_strx.

aarch64: Normalize and sort feature bit macros

This patch normalizes and sorts the feature bit macros in
include/opcode/aarch64.h such that it's easy to tell which bits are
allocated and where it's safe to add new feature bits.

Testing:
 * Testsuite run on aarch64-none-elf.

include/ChangeLog:

2020-06-22  Alex Coplan  <alex.coplan@arm.com>

* opcode/aarch64.h (AARCH64_FEATURE_SHA2): Normalize.
(AARCH64_FEATURE_AES): Likewise.
(AARCH64_FEATURE_V8_4): Likewise.
(AARCH64_FEATURE_SM4): Likewise.
(AARCH64_FEATURE_SHA3): Likewise.
(AARCH64_FEATURE_V8): Likewise.
(AARCH64_FEATURE_V8_2): Likewise.
(AARCH64_FEATURE_V8_3): Likewise.
(AARCH64_FEATURE_FP): Likewise.
(AARCH64_FEATURE_SIMD): Likewise.
(AARCH64_FEATURE_CRC): Likewise.
(AARCH64_FEATURE_LSE): Likewise.
(AARCH64_FEATURE_PAN): Likewise.
(AARCH64_FEATURE_LOR): Likewise.
(AARCH64_FEATURE_RDMA): Likewise.
(AARCH64_FEATURE_V8_1): Likewise.
(AARCH64_FEATURE_F16): Likewise.
(AARCH64_FEATURE_RAS): Likewise.
(AARCH64_FEATURE_PROFILE): Likewise.
(AARCH64_FEATURE_SVE): Likewise.
(AARCH64_FEATURE_RCPC): Likewise.
(AARCH64_FEATURE_COMPNUM): Likewise.
(AARCH64_FEATURE_DOTPROD): Likewise.
(AARCH64_FEATURE_F16_FML): Likewise.
(AARCH64_FEATURE_V8_5): Likewise.
(AARCH64_FEATURE_V8_6): Likewise.
(AARCH64_FEATURE_BFLOAT16): Likewise.
(AARCH64_FEATURE_FLAGMANIP): Likewise.
(AARCH64_FEATURE_FRINTTS): Likewise.
(AARCH64_FEATURE_SB): Likewise.
(AARCH64_FEATURE_PREDRES): Likewise.
(AARCH64_FEATURE_CVADP): Likewise.
(AARCH64_FEATURE_RNG): Likewise.
(AARCH64_FEATURE_BTI): Likewise.
(AARCH64_FEATURE_SCXTNUM): Likewise.
(AARCH64_FEATURE_ID_PFR2): Likewise.
(AARCH64_FEATURE_SSBS): Likewise.
(AARCH64_FEATURE_MEMTAG): Likewise.
(AARCH64_FEATURE_TME): Likewise.
(AARCH64_FEATURE_I8MM): Likewise.
(AARCH64_FEATURE_F32MM): Likewise.
(AARCH64_FEATURE_F64MM): Likewise.
(AARCH64_FEATURE_SVE2): Likewise.
(AARCH64_FEATURE_SVE2_AES): Likewise.
(AARCH64_FEATURE_SVE2_BITPERM): Likewise.
(AARCH64_FEATURE_SVE2_SM4): Likewise.
(AARCH64_FEATURE_SVE2_SHA3): Likewise.

Recognize some new Mach-O load commands

bfd
* mach-o.c: Support the new load commands by reading a linkedit data
command for them.
binutils
* od-macho.c: Dump linkedit data for new load commands.
include
* mach-o/loader.h: Add declarations of two new Mach-O load
commands.

gdbserver/linux-low: use std::list to store pending signals

Use std::list to store pending signals instead of a manually-managed
linked list.  This is a refactoring.

In the existing code, pending signals are kept in a manually-created
linked list with "prev" pointers.  A new pending signal is thus
inserted to the beginning of the list.  When consuming, GDB goes until
the end of the list, following the "prev" pointers, and processes the
final item.  With this patch, a new item is added to the end of the
list and the item at the front of the list is consumed.  In other
words, the list elements used to be stored in reverse order; with this
patch, they are stored in their order of arrival.  This causes a change
in the debug messages that print the pending signals.  Otherwise, no
behavioral change is expected.

gdbserver/ChangeLog:
2020-06-22  Tankut Baris Aktemur  <tankut.baris.aktemur@intel.com>

Use std::list to stop pending signal instead of manually-created
linked list.
* linux-low.h: Include <list>.
(struct pending_signal): Move here from linux-low.cc.
(struct lwp_info) <pending_signals>
<pending_signals_to_report>: Update the type.
* linux-low.cc (struct pending_signals): Remove.
(linux_process_target::delete_lwp)
(linux_process_target::add_lwp)
(enqueue_one_deferred_signal)
(dequeue_one_deferred_signal)
(enqueue_pending_signal)
(linux_process_target::resume_one_lwp_throw)
(linux_process_target::thread_needs_step_over)
(linux_process_target::resume_one_thread)
(linux_process_target::proceed_one_lwp): Update the use of pending
signal list.

gdb/jit: return bool in jit_breakpoint_re_set_internal and jit_read_descriptor

This is a minor refactoring that converts the return type of
jit_read_descriptor and jit_breakpoint_re_set_internal functions
from 'int' to 'bool'.

The return value logic of jit_breakpoint_re_set_internal has been
reversed.  With this patch it now returns true if the jit breakpoint
has been successfully initialized.

gdb/ChangeLog:
2020-06-22  Tankut Baris Aktemur  <tankut.baris.aktemur@intel.com>

* jit.c (jit_read_descriptor): Use bool as the return type.
(jit_breakpoint_re_set_internal): Use bool as the return type.
Invert the return value logic; return true if the jit breakpoint
has been successfully initialized.
(jit_inferior_init): Update the call to
jit_breakpoint_re_set_internal.

Solaris, target_wait(), don't rely on inferior_ptid

Debugging on Solaris is broken, with the procfs target backend failing
with:

 procfs: couldn't find pid 0 in procinfo list.

as soon as you start a program.

The problem is procfs_target::wait assuming that inferior_ptid is
meaningful on entry, but, since the multi-target series, inferior_ptid
is null_ptid before we call target_wait, in infrun.c:

  static ptid_t
  do_target_wait_1 (inferior *inf, ptid_t ptid,
    target_waitstatus *status, int options)
  {
...
    /* We know that we are looking for an event in the target of inferior
       INF, but we don't know which thread the event might come from.  As
       such we want to make sure that INFERIOR_PTID is reset so that none of
       the wait code relies on it - doing so is always a mistake.  */
    switch_to_inferior_no_thread (inf);

This patch tweaks the backend to remove the assumption that
inferior_ptid points at something.  sol-thread.c (the thread_stratum
that sits on top of procfs.c) also has the same issue.

Some spots in procfs_target::wait were returning
TARGET_WAITKIND_SPURIOUS+inferior_ptid.  This commit replaces those
with waiting again without returning to the core.  This fixes the
relying on inferior_ptid, and also should fix the issue discussed
here:
  https://sourceware.org/pipermail/gdb/2020-May/048616.html
  https://sourceware.org/pipermail/gdb/2020-June/048660.html

gdb/ChangeLog:
2020-06-22  Pedro Alves  <palves@redhat.com>

PR gdb/25939
* procfs.c (procfs_target::wait): Don't reference inferior_ptid.
Use the current inferior instead.  Don't return
TARGET_WAITKIND_SPURIOUS/inferior_ptid -- instead continue and
wait again.
* sol-thread.c (sol_thread_target::wait): Don't reference
inferior_ptid.
(ps_lgetregs, ps_lsetregs, ps_lgetfpregs, ps_lsetfpregs)
(sol_update_thread_list_callback): Use the current inferior's pid
instead of inferior_ptid.

RISC-V: Report warning when linking the objects with different priv specs.

We do know some conflicts among different privileged specs.  For linker,
the safest approach is that don't allow the object linked with others which
may cause conflicts.  But this may cause inconvenience since not all objects
with conflicting priv specs are linked will cause problems.  But it is hard
to know the detailed conflict cases for linker, so we probably need a option
to tell linker that we do know there are no conflicts, or we are willing to
take risks to link the objects with conflicted priv specs.  But the option
is still under discussion.

Therefore, we can report warnings rather than errors when linking the objects
with conflicted priv specs.  This not only makes the linker more flexible,
but also warns people that the conflicts may happen.  We also need to update
the output priv spec version once the input priv spec is newer.

bfd/
* elfxx-riscv.c (struct priv_spec_t priv_specs[]): Move them from
opcodes/riscv-opc.c to bfd/elfxx-riscv.c, since we need it in linker.
(riscv_get_priv_spec_class): Likewise.
(riscv_get_priv_spec_name): Likewise.
(riscv_get_priv_spec_class_from_numbers): New function, convert
the version numbers into string, then call riscv_get_priv_spec_class
to get the priv spec class.
* elfxx-riscv.h (riscv_get_priv_spec_class): Move forward declaration
from include/opcode/riscv.h to bfd/elfxx-riscv.h.
(riscv_get_priv_spec_name): Likewise.
(riscv_get_priv_spec_class_from_numbers): New forward declaration.
(opcode/riscv.h): Include it in the header rather than elfxx-riscv.c.
* elfnn-riscv.c (riscv_merge_attributes):  Get the priv spec classes
of input and output objects form their priv spec attributes by
riscv_get_priv_spec_class_from_numbers.  Report warning rather than
errors when linking objects with differnet priv spec versions.  We do
know v1.9.1 may have conflicts to other versions, so report the
warning, too.  After that, update the output priv spec version to the
newest one so far.

gas/
* config/tc-riscv.c (buf_size, buf): Remove the unused variables.
(riscv_set_default_priv_spec): Get the priv spec version from the
priv spec attributes by riscv_get_priv_spec_class_from_numbers.

include/
* opcode/riscv.h (riscv_get_priv_spec_class): Move the function
forward declarations to bfd/elfxx-riscv.h.
(riscv_get_priv_spec_name): Likewise.

opcodes/
* riscv-opc.c: Move the structures and functions to bfd/elfxx-riscv.c.
* riscv-dis.c: Include elfxx-riscv.h.

ld/
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-01.d: Updated.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-02.d: Updated.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-03.d: Updated.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-04.d: Updated.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-05.d: Updated.
* testsuite/ld-riscv-elf/attr-merge-priv-spec-failed-06.d: Updated.

RISC-V: Don't assume the priv attributes are in order when handling them.

There is no guarantee that the priv attributes should be defined in order.
Therefore, we shouldn't have the order assumption when handling them in the
riscv_merge_attributes.  Set priv_attrs_merged to TRUE if we have handled
all of the priv attributes.

bfd/
* elfnn-riscv.c (riscv_merge_attributes): Once we meet one of the
priv attributes, we will check the conflicts for all of them (major,
minor and revision), and then set the priv_attrs_merged to TRUE to
indicate that we have handled all of the priv attributes.  Remove
the unused boolean priv_may_conflict, in_priv_zero and out_priv_zero.

Automatic date update in version.in

Various procfs.c cleanups

While reading through procfs.c, I noticed a couple of cleanup
opportunities:

* Some comments and code allowed for portability across different
  targets.  Since procfs.c is Solaris-only for some time now, those can
  go.

* Likewise, there were some references to the old ioctl-based /proc left.

* The code still allowed for SYS_exec.  However, it is no longer present
  in either Solaris 11.3, 11.4, or Illumos.  Checking the OpenSolaris
  sources, I found that it had already been removed in 2010 well before
  the Solaris 11 release.

* Some blocks of #if 0 code can go:

** References to struct procinfo.{g,fp}regs_dirty which are no longer
   defined.

** Code handling the PR_ASLWP flag where <sys/procfs.h> has

#define PR_ASLWP   0x00000040 /* obsolete flag; never set */

Tested on amd64-pc-solaris2.11.

* procfs.c: Cleanup many comments.

(READ_WATCHFLAG, WRITE_WATCHFLAG, EXEC_WATCHFLAG)
(AFTER_WATCHFLAG): Replace by value.

(MAIN_PROC_NAME_FORMAT): Inline ...
(create_procinfo): ... here.

(procfs_debug_inferior): Remove SYS_exec handling.
(syscall_is_exec): Likewise.
(procfs_set_exec_trap): Likewise.

(syscall_is_lwp_exit): Inline in callers.
(syscall_is_exit): Likewise.
(syscall_is_exec): Likewise.
(syscall_is_lwp_create): Likewise.

(invalidate_cache): Remove #if 0 code.

(make_signal_thread_runnable):  Remove.
(procfs_target::resume): Remove #if 0 code.

[PR gdb/25939] Move push_target call earlier in procfs.c

Since the multi-target patch, the run command fails on Solaris with an
assertion failure even for a trivial program:

$ ./gdb -D ./data-directory ./hello
GNU gdb (GDB) 10.0.50.20200106-git
[...]
Reading symbols from ./hello...
(gdb) run
Starting program: /vol/obj/gnu/gdb/gdb/reghunt/no-resync/122448/gdb/hello
/vol/src/gnu/gdb/hg/master/reghunt/gdb/thread.c:336: internal-error:
thread_info::thread_info(inferior*, ptid_t): Assertion `inf_ != NULL'
failed.

Here's the start of the corresponding stack trace:

#0  internal_error (
    file=file@entry=0x966150
"/vol/src/gnu/gdb/hg/master/reghunt/gdb/thread.c", line=line@entry=336,
fmt=0x9ddb94 "%s: Assertion `%s' failed.")
    at /vol/src/gnu/gdb/hg/master/reghunt/gdb/gdbsupport/errors.c:51
#1  0x0000000000ef81f4 in thread_info::thread_info (this=0x1212020,
    inf_=<optimized out>, ptid_=...)
    at /vol/src/gnu/gdb/hg/master/reghunt/gdb/thread.c:344
#2  0x0000000000ef82cd in new_thread (inf=inf@entry=0x0, ptid=...)
    at /vol/src/gnu/gdb/hg/master/reghunt/gdb/thread.c:239
#3  0x0000000000efac3c in add_thread_silent (
    targ=targ@entry=0x11b0940 <the_procfs_target>, ptid=...)
    at /vol/src/gnu/gdb/hg/master/reghunt/gdb/thread.c:304
#4  0x0000000000d90692 in procfs_target::create_inferior (
    this=0x11b0940 <the_procfs_target>,
    exec_file=0x13dbef0
"/vol/obj/gnu/gdb/gdb/reghunt/no-resync/122448/gdb/hello", allargs="",
env=0x13c48f0, from_tty=<optimized out>)
    at /vol/src/gnu/gdb/hg/master/reghunt/gdb/gdbsupport/ptid.h:47
#5  0x0000000000c84e64 in run_command_1 (args=<optimized out>, from_tty=1,
    run_how=run_how@entry=RUN_NORMAL)
    at /vol/gcc-9/include/c++/9.1.0/bits/basic_string.h:263
#6  0x0000000000c85007 in run_command (args=<optimized out>,
    from_tty=<optimized out>)
    at /vol/src/gnu/gdb/hg/master/reghunt/gdb/infcmd.c:687

Looking closer, I found that in add_thread_silent as called from
procfs.c (procfs_target::create_inferior) find_inferior_ptid returns
NULL.  The all_inferiors (targ) iterator comes up empty.

Going from there, I see that in add_thread_silent

m_target_stack = {m_top = file_stratum, m_stack = {0x20190e0
<the_dummy_target>, 0x200b8c0 <exec_ops>, 0x0, 0x0, 0x0, 0x0, 0x0}}}

i.e. the_procfs_target is missing compared to the_amd64_linux_nat_target
on Linux/x86_64.

Moving the push_target call earlier allows debugging to get over the
initial assertion failure.  I run instead into

procfs: couldn't find pid 0 in procinfo list.

which is fixed by

https://sourceware.org/pipermail/gdb-patches/2020-June/169674.html

Both patches tested together on amd64-pc-solaris2.11.

PR gdb/25939
* procfs.c (procfs_target::procfs_init_inferior): Move push_target
call ...
(procfs_target::create_inferior): ... here.

PR26132, ar creates invalid libraries for some targets with plugins enabled

PR 26132
* configure.ac: Disable plugins by default for some targets.
* plugin.c: Comment typo fix.
* configure: Regenerate.

Do without ld ENABLE_PLUGINS

Instead, use BFD_SUPPORTS_PLUGINS.

* ldfile.c: Replace uses of ENABLE_PLUGINS with BFD_SUPPORTS_PLUGINS.
* ldlang.c: Likewise.
* ldlang.h: Likewise.
* ldlex.h: Likewise.
* ldmain.c: Likewise.
* lexsup.c: Likewise.
* plugin.c: Wrap body of file in #if BFD_SUPPORTS_PLUGINS.
* testplug.c: Likewise.
* testplug2.c: Likewise.
* testplug3.c: Likewise.
* testplug4.c: Likewise.
* configure.ac (ENABLE_PLUGINS): Don't define AM_CONTITIONAL.
* Makefile.am: Remove ENABLE_PLUGINS conditionals.
(PLUGIN_CFLAGS): Don't define.
(PLUGIN_C, PLUGIN_H, PLUGIN_OBJECT): Likewise.  Substitute all
uses with plugin file name.
* configure: Regenerate.
* Makefile.in: Regenerate.

Ensure 'exec-file has changed' check has priority over 'exec-file-mismatch' check

Following the implementation of exec-file-mismatch based on build-id,
an attach to a process that runs a modified exec-file was triggering
the exec-file-mismatch handling, giving a warning such as:
  warning: Mismatch between current exec-file /bd/home/philippe/gdb/git/build_termours/gdb/testsuite/outputs/gdb.base/attach/attach
  and automatically determined exec-file /bd/home/philippe/gdb/git/build_termours/gdb/testsuite/outputs/gdb.base/attach/attach
  exec-file-mismatch handling is currently "ask"
as the build-ids differ when an exec-file is recompiled.

This patch ensures that the exec-file-mismatch check is done with an up to date
build-id.  With this, exec-file-mismatch check will only trigger when the
PID file really differs from the (build-id refreshed) current exec-file.
Note that the additional check does not (yet) reload the symbols if
the exec-file is changed: this reload will happen later if needed.

gdb/ChangeLog
2020-06-21  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

* exec.c (validate_exec_file): Ensure the build-id is up to
date by calling reopen_exec_file (that checks file timestamp
to decide to re-read the file).

gdb/testsuite/ChangeLog

2020-06-21  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

* gdb.base/attach.exp: Test priority of 'exec-file' changed
over 'exec-file-mismatch'.
* gdb.base/attach.c: Mark should_exit volatile.
* gdb.base/attach2.c: Likewise.  Add a comment explaining
why the sleep cannot be big.
* gdb.base/attach3.c: New file.

Adjust gdb.mi/mi-sym-info.exp filename patterns.

2020-06-20  Sandra Loosemore  <sandra@codesourcery.com>

* gdb.mi/mi-sym-info.exp: Adjust filename patterns to make directory
prefix optional.

Fix gdb.base/list-missing-source.exp on remote host.

2020-06-20  Sandra Loosemore  <sandra@codesourcery.com>

gdb/testsuite/
* gdb.base/list-missing-source.exp: Correct $srcfile manipulation
for remote host.

Automatic date update in version.in

Remove perror from ld_assemble, ld_compile and ld_nm

ERROR should really be reserved for errors in the testsuite framework,
not just normal errors from the tools under test.  Removing use of
perror has been suggested before but without action, over concerns
that some test failures might be missed.  This patch removes uses of
perror in ld_assemble, ld_compile and ld_nm, and updates numerous
places that ignored the result of these functions by inappropriately
returning an "unresolved" test status.  Net result over my large set
of targets look good, in some cases improving the diagnostics, eg:

i386-msdos  -ERROR: tmpdir/script: nm failed
i386-msdos  -ERROR: tmpdir/script: nm failed
i386-msdos  -ERROR: tmpdir/script: nm failed
i386-msdos  -ERROR: tmpdir/script: nm failed
i386-msdos  +FAIL: script
i386-msdos  +FAIL: MRI script
i386-msdos  +FAIL: MEMORY
i386-msdos  +FAIL: MEMORY with symbols

* testsuite/lib/ld-lib.exp (default_ld_compile): Don't perror on
a compiler error.
(default_ld_assemble): Similarly for an assembler error.
(default_ld_nm): Similarly for an nm error.
(run_ld_link_tests): Report ld_assemble errors as a fail.
(check_as_cfi): Remove now unnecessary perror substitution.
* testsuite/ld-elf/exclude.exp: Report ld_nm error return as test
fails rather then unresolved.
* testsuite/ld-gc/gc.exp: Likewise.
* testsuite/ld-scripts/alignof.exp: Likewise.
* testsuite/ld-scripts/defined.exp: Likewise.
* testsuite/ld-scripts/script.exp: Likewise.
* testsuite/ld-scripts/sizeof.exp: Likewise.
* testsuite/ld-selective/selective.exp: Likewise.
* testsuite/ld-scripts/extern.exp: Likewise.  Return on ld_link
failure.
* testsuite/ld-elfweak/elfweak.exp: Report compiler errors as
test unresolved.
* testsuite/ld-fastcall/fastcall.exp: Report assember errors as
test fails.
* testsuite/ld-i386/i386.exp (iamcu_tests): Likewise.
* testsuite/ld-ia64/line.exp: Likewise.
* testsuite/ld-mep/mep.exp: Likewise.
* testsuite/ld-mips-elf/mips-elf-flags.exp: Likewise.
* testsuite/ld-nios2/nios2.exp: Likewise.
* testsuite/ld-scripts/alignof.exp: Likewise.
* testsuite/ld-x86-64/line.exp: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-scripts/log2.exp: Formatting.
* testsuite/ld-tic6x/tic6x.exp: Report ld_link errors as a test fail.

ecoff testsuite fixes

The aim of this change is to remove a whole lot of "assembly failed"
errors for ecoff targets.

* testsuite/ld-alpha/alpha.exp: Exclude *ecoff targets.
* testsuite/ld-elf/binutils.exp: Likewise.
* testsuite/ld-elf/tls.exp: Likewise.
* testsuite/ld-elf/tls_common.exp: Likewise.
* testsuite/ld-scripts/phdrs2.exp: Likewise.

SH gas configure and ld tests

All current SH gas targets use BFD.  sh-coff was incorrectly reported
as unsupported.

gas/
* configure.tgt: Set bfd_gas for all SH targets.
ld/
* testsuite/ld-sh/sh.exp: Don't run relax tests for non-ELF.
Fail when ld_assemble fails.  Use elseif to reduce indentation.

Automatic date update in version.in

Fixes for gdb.xml/tdesc-regs.exp.

2020-06-19  Sandra Loosemore  <sandra@codesourcery.com>
    Hafiz Abid Qadeer  <abidh@codesourcery.com>

* gdb.xml/tdesc-regs.exp (load_description): Correct pathname of
file sent to remote host.
(top level): Allow int32_t as type of 32-bit register.

[gdb/testsuite] Limit default_target_compile override

The file lib/future.exp contains an override of dejagnu's
default_target_compile.

The override is activated if dejagnu's default_target_compile is missing
support for one or more languages.

However, if the override is activated, it's active for all languages.

This unnecessarily extends the scope of potential problems in the override to
languages that don't need the override.

Fix this by limiting the scope of the override.

Also add a note stating for which languages the override is active, as a
reminder that support for those languages needs to be ported to dejagnu.  With
my system dejagnu 1.6.1, as well as with current dejagnu trunk, that gives us:
...
NOTE: Dejagnu's default_target_compile is missing support for Go, using \
  local override
NOTE: Dejagnu's default_target_compile is missing support for Rust, using \
  local override
...

Tested on x86_64-linux.

gdb/testsuite/ChangeLog:

2020-06-19  Tom de Vries  <tdevries@suse.de>

* lib/gdb.exp (gdb_note): New proc.
* lib/future.exp (gdb_default_target_compile_1): Factor out of ...
(gdb_default_target_compile): ... here.  Only call
gdb_default_target_compile_1 if use_gdb_compile(<lang>) is set.
(use_gdb_compile): Change to array.
(toplevel): Update sets of use_gdb_compile to specify language.
Warn about default_target_compile override.  Store dejagnu's version
of default_target_compile in dejagnu_default_target_compile.

Silence warnings about incompatible plugins.

I have been looking at a Fedora bug report[1] from a user who was
receiving warning messages from the BFD library about incompatible
plugins.  It turns out that they had both 32-bit and 64-bit versions
of the same plugin installed, and the BFD library was attempting to
load all of them.

After thinking about it for a while, it seemed to me that the simplest
solution was to not warn about incompatible plugins whilst attempting
to create a list of viable plugins.

[1]: https://bugzilla.redhat.com/show_bug.cgi?id=1836618

* plugin.c (try_load_plugin): Suppress the error message about
being unable to open a plugin if creating a list of viable
plugins.

Re: ld testsuite fixes for alpha

I missed some.

* testsuite/ld-plugin/pr22983.1.d: Accept st_other notations.
* testsuite/ld-plugin/pr22983.2.d: Likewise.
* testsuite/ld-plugin/pr22983.4.d: Likewise.

ld testsuite fixes for alpha

Some tests failed just due to st_other info, eg. [NOPV], being
emitted by readelf or objdump.  Fix that.  Also since alpha doesn't
support ifunc, don't run the ifunc tests for alpha.

* testsuite/ld-elf/dynamic-1.rd: Accept st_other notations.
* testsuite/ld-elf/rdynamic-1.rd: Likewise.
* testsuite/ld-elf/pr9676.rd: Likewise.
* testsuite/ld-elf/pr9679.rd: Likewise.
* testsuite/ld-elfvers/vers30.dsym: Likewise.
* testsuite/ld-elfvers/vers31.dsym: Likewise.
* testsuite/ld-plugin/pr22983.3.d: Likewise.
* testsuite/ld-ifunc/ifunc.exp: Exclude alpha.

Emit a warning when -z relro is unsupported

ld silently accepts -z relro and -z norelro for targets that lack the
necessary GNU_RELRO support.  This patch makes those targets emit a
warning instead, and adds testsuite infrastructure to detect when
relro is unsupported.

binutils/
* testsuite/config/default.exp (ld_elf_shared_opt): Don't set.
* testsuite/lib/binutils-common.exp (check_relro_support): New proc.
(run_dump_test): Use check_relro_support to decide whether to pass
extra ld option "-z norelro".
ld/
* emultempl/elf.em (gld${EMULATION_NAME}_handle_option): Omit
-z relro and -z norelro when target support for GNU_RELRO is lacking.
(gld${EMULATION_NAME}_before_parse): Ignore RELRO default too.
* emultempl/aarch64elf.em (gld${EMULATION_NAME}_before_parse): Ignore
RELRO default when target support for GNU_RELRO is lacking.
* emultempl/armelf.em (gld${EMULATION_NAME}_before_parse): Likewise.
* emultempl/linux.em (gld${EMULATION_NAME}_before_parse): Likewise.
* emultempl/scoreelf.em (gld${EMULATION_NAME}_before_parse): Likewise.
* testsuite/config/default.exp (ld_elf_shared_opt): Don't set.
* testsuite/ld-elf/pr16322.d: xfail when no relro support.
* testsuite/ld-elf/pr22393-1a.d: Likewise.
* testsuite/ld-elf/pr22393-1b.d: Likewise.
* testsuite/ld-elf/shared.exp (pr20995-2.so, pr20995-2): Likewise.
* testsuite/lib/ld-lib.exp (run_ld_link_tests): Use check_relro_support
to decide whether to pass extra ld option "-z norelro".

Automatic date update in version.in

Decouple inferior_ptid/inferior_thread(); dup ptids in thread list (PR 25412)

In PR 25412, Simon noticed that after the multi-target series, the
tid-reuse.exp testcase manages to create a duplicate thread in the
thread list.  Or rather, two threads with the same PTID.

add_thread_silent has code in place to detect the case of a new thread
reusing some older thread's ptid, but it doesn't work correctly
anymore when the old thread is NOT the current thread and it has a
refcount higher than 0.  Either condition prevents a thread from being
deleted, but the refcount case wasn't being considered.  I think the
reason that case wasn't considered is that that code predates
thread_info refcounting.  Back when it was originally written,
delete_thread always deleted the thread.

That add_thread_silent code in question has some now-unnecessary
warts, BTW.  For instance, this:

  /* Make switch_to_thread not read from the thread.  */
  new_thr->state = THREAD_EXITED;

... used to be required because switch_to_thread would update
'stop_pc' otherwise.  I.e., it would read registers from an exited
thread otherwise.  switch_to_thread no longer reads the stop_pc, since:

  commit f2ffa92bbce9dd5fbedc138ac2a3bc8a88327d09
  Author:     Pedro Alves <palves@redhat.com>
  AuthorDate: Thu Jun 28 20:18:24 2018 +0100

      gdb: Eliminate the 'stop_pc' global

Also, if the ptid of the now-gone current thread is reused, we
currently return from add_thread_silent with the current thread
pointing at the _new_ thread.  Either pointing at the old thread, or
at no thread selected would be reasonable.  But pointing at an
unrelated thread (the new thread that happens to reuse the ptid) is
just broken.  Seems like I was the one who wrote it like that but I
have no clue why, FWIW.

Currently, an exited thread kept in the thread list still holds its
original ptid.  The idea was that we need the ptid to be able to
temporarily switch to another thread and then switch back to the
original thread, because thread switching is really inferior_ptid
switching.  Switching back to the original thread requires a ptid
lookup.

Now, in order to avoid exited threads with the same ptid as a live
thread in the same thread list, one thing I considered (and tried) was
to change an exited thread's ptid to minus_one_ptid.  However, with
that, there's a case that we won't handle well, which is if we end up
with more than one exited thread in the list, since then all exited
threads will all have the same ptid.  Since inferior_thread() relies
on inferior_ptid, may well return the wrong thread.

My next attempt to address this, was to switch an exited thread's ptid
to a globally unique "exited" ptid, which is a ptid with pid == -1 and
tid == 'the thread's global GDB thread number'.  Note that GDB assumes
that the GDB global thread number is monotonically increasing and
doesn't wrap around.  (We should probably make GDB thread numbers
64-bit to prevent that happening in practice; they're currently signed
32-bit.)  This attempt went a long way, but still ran into a number of
issues.  It was a major hack too, obviously.

My next attempt is the one that I'm proposing, which is to bite the
bullet and break the connection between inferior_ptid and
inferior_thread(), aka the current thread.  I.e., make the current
thread be a global thread_info pointer that is written to directly by
switch_to_thread, etc., and making inferior_thread() return that
pointer, instead of having inferior_thread() lookup up the
inferior_ptid thread, by ptid_t.  You can look at this as a
continuation of the effort of using more thread_info pointers instead
of ptids when possible.

By making the current thread a global thread_info pointer, we can make
switch_to_thread simply write to the global thread pointer, which
makes scoped_restore_current_thread able to restore back to an exited
thread without relying on unrelyable ptid look ups.  I.e., this makes
it not a real problem to have more than one thread with the same ptid
in the thread list.  There will always be only one live thread with a
given ptid, so code that looks up a live thread by ptid will always be
able to find the right one.

This change required auditing the whole codebase for places where we
were writing to inferior_ptid directly to change the current thread,
and change them to use switch_to_thread instead or one of its
siblings, because otherwise inferior_thread() would return a thread
unrelated to the changed-to inferior_ptid.  That was all (hopefully)
done in previous patches.

After this, inferior_ptid is mainly used by target backend code.  It
is also relied on by a number of target methods.  E.g., the
target_resume interface and the memory reading routines -- we still
need it there because we need to be able to access memory off of
processes for which we don't have a corresponding inferior/thread
object, like when handling forks.  Maybe we could pass down a context
explicitly to target_read_memory, etc.

gdb/ChangeLog:
2020-06-18  Pedro Alves  <palves@redhat.com>

PR gdb/25412
* gdbthread.h (delete_thread, delete_thread_silent)
(find_thread_ptid): Update comments.
* thread.c (current_thread_): New global.
(is_current_thread): Move higher, and reimplement.
(inferior_thread): Reimplement.
(set_thread_exited): Use bool.  Add assertions.
(add_thread_silent): Simplify thread-reuse handling by always
calling delete_thread.
(delete_thread): Remove intro comment.
(find_thread_ptid): Skip exited threads.
(switch_to_thread_no_regs): Write to current_thread_.
(switch_to_no_thread): Check CURRENT_THREAD_ instead of
INFERIOR_PTID.  Clear current_thread_.

Don't write to inferior_ptid in aix-thread.c

There are other writes in the file, but they seem more harmless.  This
one is changing the current thread permanently.

gdb/ChangeLog:
2020-06-18  Pedro Alves  <palves@redhat.com>

* aix-thread.c (pd_update): Use switch_to_thread.

Don't write to inferior_ptid in ravenscar-thread.c

gdb/ChangeLog:
2020-06-18  Pedro Alves  <palves@redhat.com>

* ravenscar-thread.c (ravenscar_thread_target): Update.
(ravenscar_thread_target::update_inferior_ptid): Rename to ...
(ravenscar_thread_target::add_active_thread): ... this.  Don't
set m_base_ptid here.  Update to avoid referencing inferior_ptid.
(ravenscar_thread_target::wait): Don't write to inferior_ptid.

Don't write to inferior_ptid in windows-nat.c, part II

Writing to inferior_ptid in
windows_nat_target::get_windows_debug_event is just incorrect and not
necessary.  We'll report the event to GDB's core, which then takes
care of switching inferior_ptid / current thread.

Related (see windows_nat_target::get_windows_debug_event), there's
also a "current_windows_thread" global that is just begging to get out
of sync with core GDB's current thread.  This patch removes it.
gdbserver already does not have an equivalent global in win32-low.cc.

gdb/ChangeLog:
2020-06-18  Pedro Alves  <palves@redhat.com>

* nat/windows-nat.c (current_windows_thread): Remove.
* nat/windows-nat.h (current_windows_thread): Remove.
* windows-nat.c (windows_nat_target::stopped_by_sw_breakpoint):
Adjust.
(display_selectors): Adjust to fetch the current
windows_thread_info based on inferior_ptid.
(fake_create_process): No longer write to current_windows_thread.
(windows_nat_target::get_windows_debug_event):
Don't set inferior_ptid or current_windows_thread.
(windows_nat_target::wait): Adjust to not rely on
current_windows_thread.
(do_initial_windows_stuff): Now a method of windows_nat_target.
Switch to the last_ptid thread.
(windows_nat_target::attach): Adjust.
(windows_nat_target::detach): Use switch_to_no_thread instead of
writing to inferior_ptid directly.
(windows_nat_target::create_inferior): Adjust.

Don't write to inferior_ptid in windows-nat.c, part I

The inferior_ptid hack in do_initial_win32_stuff, added back in 2008:

  https://sourceware.org/ml/gdb-patches/2008-10/msg00012.html

with:

  commit 9f9d052e600ed9436f9fd558d62a189c8cc3d43e
  Author:     Pierre Muller <muller@sourceware.org>
  AuthorDate: Thu Oct 2 14:20:07 2008 +0000

      * win32-nat.c (do_initial_win32_stuff): Set inferior_ptid.

is no longer needed.  Back then, current_inferior looked like this:

  struct inferior*
  current_inferior (void)
  {
    struct inferior *inf = find_inferior_pid (ptid_get_pid (inferior_ptid));
    gdb_assert (inf);
    return inf;
  }

Nowadays, current_inferior() just returns the global current_inferior_
pointer, which didn't exist back then.

gdb/ChangeLog:
2020-06-18  Pedro Alves  <palves@redhat.com>

* windows-nat.c (do_initial_windows_stuff): No longer set inferior_ptid.

Don't write to inferior_ptid in go32-nat.c

gdb/ChangeLog:
2020-06-18  Pedro Alves  <palves@redhat.com>

* go32-nat.c (go32_nat_target::create_inferior): Switch to thread
after creating it, instead of writing to inferior_ptid.  Don't
write to inferior_ptid.

Don't write to inferior_ptid in fork-child.c

This is no longer necessary.  All targets that call fork_inferior now
also call switch_to_thread as soon as they add the main thread.

gdb/ChangeLog:
2020-06-18  Pedro Alves  <palves@redhat.com>

* fork-child.c (postfork_hook): Don't write to inferior_ptid.

Don't write to inferior_ptid in bsd-kvm.c

gdb/ChangeLog:
2020-06-18  Pedro Alves  <palves@redhat.com>

* bsd-kvm.c (bsd_kvm_target_open): Switch to thread after adding
it, instead of writing to inferior_ptid.

Don't write to inferior_ptid in btrace_fetch

gdb/ChangeLog:
2020-06-18  Pedro Alves  <palves@redhat.com>

* btrace.c (btrace_fetch): Use switch_to_thread instead of writing
to inferior_ptid.

Don't write to inferior_ptid in bsd-kvm.c

gdb/ChangeLog:
2020-06-18  Pedro Alves  <palves@redhat.com>

* bsd-kvm.c (bsd_kvm_target::close): Use switch_to_no_thread
instead of writing to inferior_ptid directly.

Don't write to inferior_ptid in corelow.c

gdb/ChangeLog:
2020-06-18  Pedro Alves  <palves@redhat.com>

* corelow.c (core_target::close): Use switch_to_no_thread instead
of writing to inferior_ptid directly.
(add_to_thread_list, core_target_open): Use switch_to_thread
instead of writing to inferior_ptid directly.

Don't write to inferior_ptid in darwin-nat.c

Untested.

gdb/ChangeLog:
2020-06-18  Pedro Alves  <palves@redhat.com>

* darwin-nat.c (darwin_nat_target::decode_message): Don't write to
inferior_ptid.
(darwin_nat_target::stop_inferior, darwin_nat_target::kill): Avoid
inferior_ptid.
(darwin_attach_pid): Use switch_to_no_thread instead of writing to
inferior_ptid directly.
(darwin_nat_target::init_thread_list): Switch to thread, instead
of writing to inferior_ptid.
(darwin_nat_target::attach): Don't write to inferior_ptid.
(darwin_nat_target::get_ada_task_ptid): Avoid inferior_ptid.

Don't write to inferior_ptid in gnu-nat.c

Untested.

gdb/ChangeLog:
2020-06-18  Pedro Alves  <palves@redhat.com>

* gnu-nat.c (gnu_nat_target::create_inferior): Switch to the added
thread.
(gnu_nat_target::attach): Don't write to inferior_ptid directly.
Instead use switch_to_thread.
(gnu_nat_target::detach): Use switch_to_no_thread
instead of writing to inferior_ptid directly.  Used passed-in
inferior instead of looking up the inferior by pid.

Don't write to inferior_ptid in go32-nat.c

generic_mourn_inferior already takes care of switching to no thread.

gdb/ChangeLog:
2020-06-18  Pedro Alves  <palves@redhat.com>

* go32-nat.c (go32_nat_target::create_inferior): Don't write to
inferior_ptid.

Don't write to inferior_ptid in nto-procfs.c

A best effort patch, which fixes some bit rot and removes some
inferior_ptid references -- this port clearly hasn't been built in a
long while.

gdb/ChangeLog:
2020-06-18  Pedro Alves  <palves@redhat.com>

* nto-procfs.c (nto_procfs_target::update_thread_list): Avoid
inferior_ptid.
(nto_procfs_target::attach): Avoid inferior_ptid.  Switch to
thread.
(nto_procfs_target::detach): Avoid referencing
inferior_ptid.  Use switch_to_no_thread instead of writing to
inferior_ptid directly.
(nto_procfs_target::mourn_inferior): Use switch_to_no_thread
instead of writing to inferior_ptid directly.
(nto_procfs_target::create_inferior): Avoid inferior_ptid.  Switch
to thread.

Don't write to inferior_ptid in remote-sim.c

gdb/ChangeLog:
2020-06-18  Pedro Alves  <palves@redhat.com>

* remote-sim.c (gdbsim_target::create_inferior): Switch to thread
after creating it, instead of writing to inferior_ptid.
(gdbsim_target_open): Use switch_to_no_thread instead of writing
to inferior_ptid directly.
(gdbsim_target::wait): Don't write to inferior_ptid.

Don't write to inferior_ptid in remote.c

gdb/ChangeLog:
2020-06-18  Pedro Alves  <palves@redhat.com>

* remote.c (remote_target::remote_notice_new_inferior): Use
switch_to_thread instead of writing to inferior_ptid directly.
(remote_target::add_current_inferior_and_thread): Use
switch_to_no_thread instead of writing to inferior_ptid directly.
(extended_remote_target::attach): Use switch_to_inferior_no_thread
and switch_to_thread instead of using set_current_inferior or
writing to inferior_ptid directly.

Don't write to inferior_ptid in tracectf.c

gdb/ChangeLog:
2020-06-18  Pedro Alves  <palves@redhat.com>

* tracectf.c (ctf_target_open): Switch to added thread instead of
writing to inferior_ptid directly.
(ctf_target::close): Use switch_to_no_thread instead of writing to
inferior_ptid directly.

Don't write to inferior_ptid in tracefile-tfile.c

gdb/ChangeLog:
2020-06-18  Pedro Alves  <palves@redhat.com>

* tracefile-tfile.c (tfile_target_open): Don't write to
inferior_ptid directly, instead switch to added thread.
(tfile_target::close): Use switch_to_no_thread instead of writing
to inferior_ptid directly.

Don't write to inferior_ptid in procfs.c

The inferior_ptid write in procfs_do_thread_registers should be
unnecessary because the target_fetch_registers method should (and
does) extract the ptid from the regcache.

Not tested.

gdb/ChangeLog:
2020-06-18  Pedro Alves  <palves@redhat.com>

* procfs.c (procfs_target::attach): Don't write to inferior_ptid.
(procfs_target::detach): Use switch_to_no_thread
instead of writing to inferior_ptid directly.
(do_attach): Change return type to void.  Switch to the added
thread.
(procfs_target::create_inferior): Switch to the added thread.
(procfs_do_thread_registers): Don't write to inferior_ptid.

Don't write to inferior_ptid in infrun.c

gdb/ChangeLog:
2020-06-18  Pedro Alves  <palves@redhat.com>

* infrun.c (generic_mourn_inferior): Use switch_to_thread instead
of writing to inferior_ptid.
(scoped_restore_exited_inferior): Delete.
(handle_vfork_child_exec_or_exit): Simplify using
scoped_restore_current_pspace_and_thread.  Use switch_to_thread
instead of writing to inferior_ptid.
(THREAD_STOPPED_BY): Delete.
(thread_stopped_by_watchpoint, thread_stopped_by_sw_breakpoint)
(thread_stopped_by_hw_breakpoint): Delete.
(save_waitstatus): Use
scoped_restore_current_thread+switch_to_thread, and call
target_stopped_by_watchpoint instead of
thread_stopped_by_watchpoint, target_stopped_by_sw_breakpoint
instead of thread_stopped_by_sw_breakpoint, and
target_stopped_by_hw_breakpoint instead of
thread_stopped_by_hw_breakpoint.
(handle_inferior_event)
<TARGET_WAITKIND_EXITED/TARGET_WAITKIND_SIGNALLED>: Don't write to
inferior_ptid directly, nor
set_current_inferior/set_current_program_space.  Use
switch_to_thread / switch_to_inferior_no_thread instead.

Don't write to inferior_ptid in target.c

gdb/ChangeLog:
2020-06-18  Pedro Alves  <palves@redhat.com>

* target.c (generic_mourn_inferior): Use switch_to_no_thread
instead of writing to inferior_ptid.

Don't write to inferior_ptid in inf-ptrace.c

gdb/ChangeLog:
2020-06-18  Pedro Alves  <palves@redhat.com>

* inf-ptrace.c (inf_ptrace_target::create_inferior): Switch to the
added thread.
(inf_ptrace_target::attach): Don't write to inferior_ptid.  Switch
to the added thread.
(inf_ptrace_target::detach_success): Use switch_to_no_thread
instead of writing to inferior_ptid.

Don't write to inferior_ptid in gdbarch-selftests.c, mock address_space too

Use switch_to_thread instead of writing to inferior_ptid.  This
requires a couple of improvements to the mocking environment.  One is
to mock a pspace too, and assigning it to the inferior.  In turn, this
requires heap-allocating the address space, so that the regular
program_space dtor destroys the address space correctly.

(Note that new the mock program_space is allocated on the stack, and
thus depends on the previous patch that eliminated
delete_program_space.)

gdb/ChangeLog:
2020-06-18  Pedro Alves  <palves@redhat.com>

* gdbarch-selftests.c: Include "progspace-and-thread.h".
(register_to_value_test): Mock a program_space too.  Heap-allocate
the address space.  Don't write to inferior_ptid.  Use
switch_to_thread instead.

gcore, handle exited threads better

An early (and since discarded) version of this series tried to make
exited threads have distinct PTID between each other, and that change
exposed a problem in linux-tdep.c...  This was exposed by the
gdb.threads/gcore-stale-thread.exp testcase, which is exactly about
calling gcore with an exited thread selected:

 (gdb) [Thread 0x7ffff7fb6740 (LWP 31523) exited]
 PASS: gdb.threads/gcore-stale-thread.exp: continue to breakpoint: break-here
 gcore /home/pedro/gdb/binutils-gdb/build/gdb/testsuite/outputs/gdb.threads/gcore-stale-thread/gcore-stale-thread.core
 /home/pedro/gdb/binutils-gdb/build/../src/gdb/inferior.c:66: internal-error: void set_current_inferior(inferior*): Assertion `inf != NULL' failed.
 A problem internal to GDB has been detected,

That was find_inferior_ptid being called on the "exited" ptid, which
on that previous (and discarded attempt) had pid==-1.  The problem is
that linux-tdep.c, where it looks for the signalled thread, isn't
considering exited threads.  Also, while at it, that code isn't
considering multi-target either, since it is using
iterate_over_threads which iterates over all threads of all targets.
Fixed by switching to range-for iteration instead.

gdb/ChangeLog:
2020-06-18  Pedro Alves  <palves@redhat.com>

* linux-tdep.c (find_signalled_thread(thread_info *,void *)):
Delete.
(find_signalled_thread()): New, factored out from
linux_make_corefile_notes and adjusted to handle exited threads.
(linux_make_corefile_notes): Adjust to use the new
find_signalled_thread.

Don't write to inferior_ptid in linux_get_siginfo_data

gdb/ChangeLog:
2020-06-18  Pedro Alves  <palves@redhat.com>

* linux-tdep.c (btrace_fetch): Save/restore current thread instead
of saving/restoring inferior_ptid.

[gdb/testsuite] Move code from gdb_init to default_gdb_init

If a baseboard file wants to override a proc foo, but also use the original
proc, it'll have to do something like:
...
rename foo save_foo
proc foo { } {
    ...
    set res [save_foo]
    ...
    return res
}
...
This adds a new proc named save_foo, which introduces the risk of clashing with
an existing proc.

There's a pattern in the gdb testsuite procs, that facilitates this override:
...
proc default_foo { } {
  ...
}

proc foo { } {
    return [default_foo]
}
...
such that in a baseboard file we don't need the rename:
...
proc foo { } {
    ...
    set res [default_foo]
    ...
    return res
}
...

The exception to the pattern though is gdb_init, which has a default_gdb_init
counterpart, but contains much more code than just the call to
default_gdb_init.

Fix this by moving all but the call to default_gdb_init to default_gdb_init.

Tested on x86_64-linux.

gdb/testsuite/ChangeLog:

2020-06-18  Tom de Vries  <tdevries@suse.de>

* lib/gdb.exp (gdb_init): Move all but call to default_gdb_init to ...
(default_gdb_init): ... here.

x86: also test alternative VMGEXIT encoding

gas/

* testsuite/gas/i386/arch-13.s: Add alternative VMGEXIT case.
* testsuite/gas/i386/arch-13.d: Extend -march=. Adjust
expectations.

opcodes/

* i386-dis.c (prefix_table): Revert the last vmgexit change.

[PATCH] gold: Set DF_1_PIE for -pie

PR gold/26039
* layout.cc (Layout::finish_dynamic_section): Set DF_1_PIE.

elfcpp/
* elfcpp.h (enum DF_1): New enum member DF_1_PIE.

Fix TUI support checks in gdb.tui tests.

2020-06-17 Sandra Loosemore <sandra@codesourcery.com>

gdb/testsuite/
* gdb.tui/basic.exp: Skip test when TUI is unsupported, don't
just say UNSUPPORTED.
* gdb.tui/corefile-run.exp: Likewise.
* gdb.tui/empty.exp: Likewise.
* gdb.tui/list-before.exp: Likewise.
* gdb.tui/list.exp: Likewise.
* gdb.tui/main.exp: Likewise.
* gdb.tui/regs.exp: Likewise.
* gdb.tui/resize.exp: Likewise.
* gdb.tui/tui-layout-asm-short-prog.exp: Likewise.
* gdb.tui/tui-layout-asm.exp: Likewise.
* gdb.tui/tui-missing-src.exp: Likewise.
* gdb.tui/winheight.exp: Likewise.
* gdb.tui/new-layout.exp: Likewise.  Also move check earlier.

Remove unnecessary TUI declarations

I found some unnecessary declarations (and one unused macro) in the
TUI.  This patch removes them.

gdb/ChangeLog
2020-06-17  Tom Tromey  <tom@tromey.com>

* tui/tui-win.h (tui_scroll_forward, tui_scroll_backward)
(tui_scroll_left, tui_scroll_right, struct tui_win_info): Don't
declare.
* tui/tui-data.h (MIN_CMD_WIN_HEIGHT): Remove.

Automatic date update in version.in

Fix typo in my gdb.debuginfod entry.

Fix TCL error in gdb.python/py-format-string.exp.

2020-06-17 Sandra Loosemore <sandra@codesourcery.com>

gdb/testsuite/
* gdb.python/py-format-string.exp: Move test for python support
earlier, out of function body.

gdb: check for partial symtab presence in dwarf2_initialize_objfile

This patch fixes an internal error that is triggered when loading the
same binary twice with the index-cache on:

    $ ./gdb -q -nx --data-directory=data-directory
    (gdb) set index-cache on
    (gdb) shell mktemp -d
    /tmp/tmp.BLgouVoPq4
    (gdb) set index-cache directory /tmp/tmp.BLgouVoPq4
    (gdb) file a.out
    Reading symbols from a.out...
    (gdb) file a.out
    Load new symbol table from "a.out"? (y or n) y
    Reading symbols from a.out...
    /home/smarchi/src/binutils-gdb/gdb/dwarf2/read.c:2540: internal-error: void create_cus_from_index(dwarf2_per_bfd*, const gdb_byte*, offset_type, const gdb_byte*, offset_type): Assertion `per_bfd->all_comp_units.empty ()' failed.
    A problem internal to GDB has been detected,
    further debugging may prove unreliable.
    Quit this debugging session? (y or n)

This is what happens:

1. We load the binary the first time, partial symtabs are created,
   per_bfd->all_comp_units is filled from those.
2. Because index-cache is on, we also generate an index in the cache.
3. We load the binary a second time, in dwarf2_initialize_objfile we
   check: was an index already loaded for this BFD?  No, so we try to
   read the index and fill the per-bfd using it.  We do find an index,
   it's in the cache.
4. The function create_cus_from_index asserts (rightfully) that
   per_cu->all_comp_units is empty, and the assertion fails.

This assertion verifies that we are not reading an index for a BFD for
which we have already built partial symtabs or read another index.

The index-cache gives a situation that isn't currently accounted for: a
BFD for which we have built the partial symtabs the first time, but has
an index the second time.

This patch addresses it by checking for the presence of partial symtabs
in dwarf2_initialize_objfile.  If there are, we don't try reading the
index.

gdb/ChangeLog:

* dwarf2/read.c (dwarf2_initialize_objfile): Check for presence
of partial symtabs.

gdb/testsuite/ChangeLog:

* gdb.base/index-cache-load-twice.c: New.
* gdb.base/index-cache-load-twice.exp: New.

Change-Id: Ie05474c44823fcdff852b73170dd28dfd66cb6a2

gdb/regformats: remove unused regformats/reg-*.dat

I believe that the .dat files starting with `reg-` are the manually
written ones, the other being generated from xml files from the features
directory.

This patch removes the manually-written files that are no longer needed.
They are unused since the recent series that removed a bunch of
gdbserver ports.

gdb/ChangeLog:

* regformats/reg-arm.dat: Remove.
* regformats/reg-bfin.dat: Remove.
* regformats/reg-cris.dat: Remove.
* regformats/reg-crisv32.dat: Remove.
* regformats/reg-m32r.dat: Remove.
* regformats/reg-tilegx.dat: Remove.
* regformats/reg-tilegx32.dat: Remove.

Change-Id: I55ab6e45e3d0d316cda93f863c51fc9b867adfaa

gdb, gdbserver: remove ARM regdat files

This patch removes the leftover regformats .dat files for the arm
architecture.  There are no longer relevant, since the arm architecture
has been converted to use feature-based target-descriptions.  These .dat
files are used by GDBserver ports that still use static target
descriptions.

These .dat files are generated from corresponding .xml files in the
features directory.  And since the corresponding .xml files for these
arm .dat files don't exist anymore, it is impossible to re-generated
them.  If you delete these .dat files and type "make" in the features
directory, you'll get:

  make: *** No rule to make target '../regformats/arm/arm-with-iwmmxt.dat', needed by 'all'.  Stop.

So it removes the entries in the `WHICH` variable of
gdb/features/Makefile.

Finally, it removes the rule in gdbserver/Makefile to generate .cc files
from `../gdb/regformats/arm/%.dat`.

gdb/ChangeLog:

* features/Makefile (WHICH): Remove arm files.
* regformats/arm/arm-with-iwmmxt.dat: Remove.
* regformats/arm/arm-with-neon.dat: Remove.
* regformats/arm/arm-with-vfpv2.dat: Remove.
* regformats/arm/arm-with-vfpv3.dat: Remove.

gdbserver/ChangeLog:

* Makefile.in (%-generated.cc: ../gdb/regformats/arm/%.dat):
Remove.

Change-Id: I3b7d989c50e2cb92235c1f7c7071a26839d84c78

gdb/features: remove rx.xml from XMLTOC list

When trying to run `make` in the features directory, in a clean repo, we
get:

    Makefile:254: warning: overriding recipe for target 'rx.c'
    Makefile:250: warning: ignoring old recipe for target 'rx.c'
    make: Nothing to be done for 'all'.

The warnings come from the fact that `rx.xml` is present in two lists,
causing two `rx.c` targets to be defined.  It is ok for it to be in the
FEATURES_XMLFILES list, as this architecture uses the "feature-based"
target-descriptions.  It shouldn't be in the XMLTOC list, as this is for
architectures that define complete/static target descriptions as XML
files.

gdb/ChangeLog:

* features/Makefile (XMLTOC): Remove rx.xml.

Change-Id: Iada4ab54b3d4542588fac543d16ee35a92537319

Pass INTERNAL_GDBFLAGS when executing GDB

gdb.debuginfod/fetch_src_and_symbols.exp attempts to ascertain
whether GDB was built with debuginfod support by executing
"$GDB --configuration".

That seems harmless enough. However, if GDB is not already installed
on the host, the command will fail:

$ ./gdb --config
Exception caught while booting Guile.
Error in function "open-file":
No such file or directory: "/usr/share/gdb/guile/gdb/boot.scm"
./gdb: warning: Could not complete Guile gdb module initialization from:
/usr/share/gdb/guile/gdb/boot.scm.
Limited Guile support is available.
Suggest passing --data-directory=/path/to/gdb/data-directory.
Python Exception <class 'ModuleNotFoundError'> No module named 'gdb':
./gdb: warning:
Could not load the Python gdb module from `/usr/share/gdb/python'.
Limited Python support is available from the _gdb module.
Suggest passing --data-directory=/path/to/gdb/data-directory.
This GDB was configured as follows:
   configure --host=x86_64-redhat-linux-gnu --target=x86_64-redhat-linux-gnu
      [abbreviated output]

The problem here is, of course, that while running in the test suite,
we must pass INTERNAL_GDBFLAGS in order to pick up the --data-directory
option.

gdb/testsuite/ChangeLog
2020-06-17  Keith Seitz  <keiths@redhat.com>

* gdb.deuginfod/fetch_src_and_symbols.exp: Pass INTERNAL_GDBFLAGS
when executing "gdb --configuration".

ld: Suppress warning for unsupported attribute from older GCC

Suppress warning for unsupported attribute from older GCC:

.../ld/testsuite/ld-elf/pr25754-1a.c:9: warning: 'noclone' attribute directive ignored
.../ld/testsuite/ld-elf/pr25754-1a.c:9: warning: 'noclone' attribute directive ignored
ERROR: .../ld/testsuite/ld-elf/pr25754-1a.c: compilation failed
UNRESOLVED: Build pr25754-1a ( )

* testsuite/ld-elf/linux-x86.exp (check_pr25749a): Append "-w"
to cflags.

ld: Require GCC 5 for Build pr25749-1b (-pie -fPIE)

Before GCC 5, Build pr25749-1b (-pie -fPIE) won't trigger the expected
linker error.

* testsuite/ld-elf/linux-x86.exp: Require GCC 5 for Build
pr25749-1b (-pie -fPIE).

x86: Delete incorrect vmgexit entry in prefix_table

* i386-dis.c (prefix_table): Delete the incorrect vmgexit.

[gdb/testsuite] Remove dependence on tcl_unknown

In gdb_init we install a local version of ::unknown, which relies on
::tcl_unknown, which is defined by dejagnu.

This proc may be moved into a namespace, or disappear altogether, as
indicated by dejagnu maintainers, so we can't rely on it.

Fix this by recreating tcl's version of unknown, and using that instead.

Tested on x86_64-linux.

gdb/testsuite/ChangeLog:

2020-06-17  Tom de Vries  <tdevries@suse.de>

* lib/gdb.exp (gdb_tcl_unknown): New proc.
(gdb_init): Use gdb_tcl_unknown for ::unknown override.  Make override
conditional on presence of gdb_tcl_unknown.
(gdb_finish): Make override undo conditional on presence of
gdb_tcl_unknown.

Update thread_control_state::trap_expected comments

The comments describing trap_expected are out of date.  It
predates displaced stepping and non-stop mode ("keep other threads
stopped").  It predates stepping over watchpoints with breakpoints
inserted (keep_going_pass_signal).  Says the variable is cleared
in normal_stop, when it isn't.  This fixes it.

gdb/ChangeLog:
2020-06-17  Pedro Alves  <palves@redhat.com>

* gdbthread.h (thread_control_state) <trap_expected> Update
comments.

gdb: Convert language la_lookup_symbol_nonlocal field to a method

This commit changes the language_data::la_lookup_symbol_nonlocal
function pointer member variable into a member function of
language_defn.

There should be no user visible changes after this commit.

gdb/ChangeLog:

* ada-lang.c (ada_lookup_symbol_nonlocal): Rename to
ada_language::lookup_symbol_nonlocal.
(ada_language_data): Delete la_lookup_symbol_nonlocal initializer.
(ada_language::lookup_symbol_nonlocal): New member function,
implementation from ada_lookup_symbol_nonlocal.
* c-lang.c (c_language_data): Delete la_lookup_symbol_nonlocal
initializer.
(cplus_language_data): Delete la_lookup_symbol_nonlocal
initializer.
(cplus_language::lookup_symbol_nonlocal): New member function.
(asm_language_data): Delete la_lookup_symbol_nonlocal initializer.
(minimal_language_data) Likewise.
* cp-namespace.c (cp_lookup_nested_symbol): Update comment.
* d-lang.c (d_language_data): Delete la_lookup_symbol_nonlocal
initializer.
(d_language::lookup_symbol_nonlocal): New member function.
* f-lang.c (f_language_data): Delete la_lookup_symbol_nonlocal
initializer.
(f_language::lookup_symbol_nonlocal): New member function.
* go-lang.c (go_language_data): Delete la_lookup_symbol_nonlocal
initializer.
* language.c (unknown_language_data): Likewise.
(auto_language_data): Likewise.
* language.h (language_data): Delete la_lookup_symbol_nonlocal
field.
(language_defn::lookup_symbol_nonlocal): New member function.
* m2-lang.c (m2_language_data): Delete la_lookup_symbol_nonlocal
initializer.
* objc-lang.c (objc_language_data): Likewise.
* opencl-lang.c (opencl_language_data): Likewise.
* p-lang.c (pascal_language_data): Likewise.
* rust-lang.c (rust_lookup_symbol_nonlocal): Rename to
rust_language::lookup_symbol_nonlocal.
(rust_language_data): Delete la_lookup_symbol_nonlocal
initializer.
(rust_language::lookup_symbol_nonlocal): New member function,
implementation from rust_lookup_symbol_nonlocal.
* symtab.c (lookup_symbol_aux): Update call to
lookup_symbol_nonlocal.
(basic_lookup_symbol_nonlocal): Rename to...
(language_defn::lookup_symbol_nonlocal): ...this, and update
header comment.  Remove language_defn parameter, and replace with
uses of `this'.
* symtab.h (basic_lookup_symbol_nonlocal): Delete declaration.

gdb: Convert language la_value_print_inner field to a method

This commit changes the language_data::la_value_print_inner function
pointer member variable into a member function of language_defn.

There should be no user visible changes after this commit.

gdb/ChangeLog:

* ada-lang.c (ada_language_data): Delete la_value_print_inner
initializer.
(ada_language::value_print_inner): New member function.
* c-lang.c (c_language_data): Delete la_value_print_inner
initializer.
(cplus_language_data): Likewise.
(asm_language_data): Likewise.
(minimal_language_data): Likewise.
* d-lang.c (d_language_data): Likewise.
(d_language::value_print_inner): New member function.
* f-lang.c (f_language_data): Delete la_value_print_inner
initializer.
(f_language::value_print_inner): New member function.
* f-lang.h (f_value_print_innner): Rename to...
(f_value_print_inner): ...this (note spelling of 'inner').
* f-valprint.c (f_value_print_innner): Rename to...
(f_value_print_inner): ...this (note spelling of 'inner').
* go-lang.c (go_language_data): Delete la_value_print_inner
initializer.
(go_language::value_print_inner): New member function.
* language.c (language_defn::value_print_inner): Define new member
function.
(unk_lang_value_print_inner): Delete.
(unknown_language_data): Delete la_value_print_inner initializer.
(unknown_language::value_print_inner): New member function.
(auto_language_data): Delete la_value_print_inner initializer.
(auto_language::value_print_inner): New member function.
* language.h (language_data): Delete la_value_print_inner field.
(language_defn::value_print_inner): Delcare new member function.
* m2-lang.c (m2_language_data): Delete la_value_print_inner
initializer.
(m2_language::value_print_inner): New member function.
* objc-lang.c (objc_language_data): Delete la_value_print_inner
initializer.
* opencl-lang.c (opencl_language_data): Likewise.
* p-lang.c (pascal_language_data): Likewise.
(pascal_language::value_print_inner): New member function.
* rust-lang.c (rust_language_data): Delete la_value_print_inner
initializer.
(rust_language::value_print_inner): New member function.
* valprint.c (do_val_print): Update call to value_print_inner.

gdb: Convert language la_value_print field to a method

This commit changes the language_data::la_value_print function pointer
member variable into a member function of language_defn.

There should be no user visible changes after this commit.

gdb/ChangeLog:

* ada-lang.c (ada_language_data): Delete la_value_print
initializer.
(ada_language::value_print): New member function.
* c-lang.c (c_language_data): Delete la_value_print initializer.
(cplus_language_data): Likewise.
(asm_language_data): Likewise.
(minimal_language_data): Likewise.
* d-lang.c (d_language_data): Likewise.
* f-lang.c (f_language_data): Likewise.
* go-lang.c (go_language_data): Likewise.
* language.c (unk_lang_value_print): Delete.
(language_defn::value_print): Define new member function.
(unknown_language_data): Delete la_value_print initializer.
(unknown_language::value_print): New member function.
(auto_language_data): Delete la_value_print initializer.
(auto_language::value_print): New member function.
* language.h (language_data): Delete la_value_print field.
(language_defn::value_print): Declare new member function.
(LA_VALUE_PRINT): Update call to value_print.
* m2-lang.c (m2_language_data): Delete la_value_print initializer.
* objc-lang.c (objc_language_data): Likewise.
* opencl-lang.c (opencl_language_data): Likewise.
* p-lang.c (pascal_language_data): Likewise.
(pascal_language::value_print): New member function.
* rust-lang.c (rust_language_data): Delete la_value_print
initializer.

gdb: Convert language la_watch_location_expression field to a method

This commit changes the language_data::la_watch_location_expression
function pointer member variable into a member function of
language_defn.

There should be no user visible changes after this commit.

gdb/ChangeLog:

* ada-lang.c (ada_watch_location_expression): Rename to
ada_language::watch_location_expression.
(ada_language_data): Delete la_watch_location_expression
initializer.
(ada_language::watch_location_expression): New member function,
implementation from ada_watch_location_expression.
* breakpoint.c (watch_command_1): Update call to
watch_location_expression.
* c-lang.c (c_watch_location_expression): Rename to
language_defn::watch_location_expression.
(c_language_data): Delete la_watch_location_expression
initializer.
(cplus_language_data): Likewise.
(asm_language_data): Likewise.
(minimal_language_data): Likewise.
* c-lang.h (c_watch_location_expression): Delete declaration.
* d-lang.c (d_language_data): Delete la_watch_location_expression
initializer.
* f-lang.c (f_language_data): Likewise.
* go-lang.c (go_language_data): Likewise.
* language.c (language_defn::watch_location_expression): Member
function implementation from c_watch_location_expression.
(unknown_language_data): Delete la_watch_location_expression
initializer.
(auto_language_data): Likewise.
* language.h (language_data): Delete la_watch_location_expression
field.
(language_defn::watch_location_expression): Declare new member
function.
* m2-lang.c (m2_language_data): Delete
la_watch_location_expression initializer.
* objc-lang.c (objc_language_data): Likewise.
* opencl-lang.c (opencl_language_data): Likewise.
* p-lang.c (pascal_language_data): Likewise.
* rust-lang.c (rust_watch_location_expression): Rename to
rust_language::watch_location_expression.
(rust_language_data): Delete la_watch_location_expression
initializer.
(rust_language::watch_location_expression): New member function,
implementation from rust_watch_location_expression.

gdb: Convert language la_collect_symbol_completion_matches field to a method

This commit changes the
language_data::la_collect_symbol_completion_matches function pointer
member variable into a member function of language_defn.

There should be no user visible changes after this commit.

gdb/ChangeLog:

* ada-lang.c (ada_collect_symbol_completion_matches): Rename to
ada_language::collect_symbol_completion_matches.
(ada_language_data): Delete la_collect_symbol_completion_matches
initializer.
(ada_language::collect_symbol_completion_matches): New member
function, implementation from
ada_collect_symbol_completion_matches.
* c-lang.c (c_language_data): Delete
la_collect_symbol_completion_matches initializer.
(cplus_language_data): Likewise.
(asm_language_data): Likewise.
(minimal_language_data): Likewise.
* d-lang.c (d_language_data): Likewise.
* f-lang.c (f_collect_symbol_completion_matches): Rename to
f_language::collect_symbol_completion_matches.
(f_language_data): Delete la_collect_symbol_completion_matches
initializer.
(f_language::collect_symbol_completion_matches) New member
function, implementation from f_collect_symbol_completion_matches.
* go-lang.c (go_language_data): Delete
la_collect_symbol_completion_matches initializer.
* language.c (unknown_language_data): Likewise.
(auto_language_data): Likewise.
* language.h (language_data): Delete
la_collect_symbol_completion_matches field.
(language_defn::collect_symbol_completion_matches): New member
function.
* m2-lang.c (m2_language_data): Delete
la_collect_symbol_completion_matches initializer.
* objc-lang.c (objc_language_data): Likewise.
* opencl-lang.c (opencl_language_data): Likewise.
* p-lang.c (pascal_language_data): Likewise.
* rust-lang.c (rust_language_data): Likewise.
* symtab.c (default_collect_symbol_completion_matches): Delete.
(collect_symbol_completion_matches): Update call to
collect_symbol_completion_matches.
(collect_symbol_completion_matches_type): Likewise.
* symtab.h (default_collect_symbol_completion_matches): Delete
declaration.

gdb: Convert language la_word_break_characters field to a method

This commit changes the language_data::la_word_break_characters
function pointer member variable into a member function of
language_defn.

There should be no user visible changes after this commit.

gdb/ChangeLog:

* ada-lang.c (ada_get_gdb_completer_word_break_characters): Delete.
(ada_language_data): Delete la_word_break_characters initializer.
(ada_language::word_break_characters): New member function.
* c-lang.c (c_language_data): Delete la_word_break_characters
initializer.
(cplus_language_data): Likewise.
(asm_language_data): Likewise.
(minimal_language_data): Likewise.
* completer.c: Update global comment.
(advance_to_expression_complete_word_point): Update call to
word_break_characters.
(complete_files_symbols): Likewise.
(complete_line_internal_1): Likewise.
(default_completer_handle_brkchars): Likewise.
(skip_quoted_chars): Likewise.
* d-lang.c (d_language_data): Delete la_word_break_characters
initializer.
* f-lang.c (f_word_break_characters): Delete.
(f_language_data): Delete la_word_break_characters initializer.
(f_language::word_break_characters): New member function.
* go-lang.c (go_language_data): Delete la_word_break_characters
initializer.
* language.c (unknown_language_data): Likewise.
(auto_language_data): Likewise.
* language.h (default_word_break_characters): Move declaration to
earlier in the file.
(language_data): Delete la_word_break_characters field.
(language_defn::word_break_characters): New member function.
* m2-lang.c (m2_language_data): Delete la_word_break_characters
initializer.
* objc-lang.c (objc_language_data): Likewise.
* opencl-lang.c (opencl_language_data): Likewise.
* p-lang.c (pascal_language_data): Likewise.
* rust-lang.c (rust_language_data): Likewise.

gdb: Convert language la_get_symbol_name_matcher field to a method

This commit changes the language_data::la_get_symbol_name_matcher
function pointer member variable into a member function of
language_defn.

There should be no user visible changes after this commit.

Before this commit access to the la_get_symbol_name_matcher function
pointer was through the get_symbol_name_matcher function, which looked
something like this (is pseudo-code):

  <return-type>
  get_symbol_name_matcher (language_defn *lang, <other args>)
  {
    if (current_language == ada)
      current_language->la_get_symbol_name_matcher (<other args>);
    else
      lang->la_get_symbol_name_matcher (<other args>);
  }

In this commit I moved the get_symbol_name_matcher as a non-virtual
function in the language_defn base class, I then add a new virtual
method that is only used from within get_symbol_name_matcher, this can
then be overridden by specific languages as needed.  So we now have:

  class language_defn
  {
    <return-type> get_symbol_name_matcher (<args>)
    {
      if (current_language == ada)
        return current_language->get_symbol_name_matcher_inner (<args>);
      else
        return this->get_symbol_name_matcher_inner (<args>);
    }

    virtual <return-type> get_symbol_name_matcher_inner (<args>)
    {
        ....
    }
  }

gdb/ChangeLog:

* ada-lang.c (ada_get_symbol_name_matcher): Update header comment.
(ada_language_data): Delete la_get_symbol_name_matcher
initializer.
(language_defn::get_symbol_name_matcher_inner): New member
function.
* c-lang.c (c_language_data): Delete la_get_symbol_name_matcher
initializer.
(cplus_language_data): Likewise.
(cplus_language::get_symbol_name_matcher_inner): New member
function.
(asm_language_data): Delete la_get_symbol_name_matcher initializer.
(minimal_language_data): Likewise.
* cp-support.h (cp_get_symbol_name_matcher): Update header comment.
* d-lang.c (d_language_data): Delete la_get_symbol_name_matcher
initializer.
* dictionary.c (iter_match_first_hashed): Update call to
get_symbol_name_matcher.
(iter_match_next_hashed): Likewise.
(iter_match_next_linear): Likewise.
* dwarf2/read.c (dw2_expand_symtabs_matching_symbol): Likewise.
* f-lang.c (f_language_data): Delete la_get_symbol_name_matcher
initializer.
(f_language::get_symbol_name_matcher_inner): New member function.
* go-lang.c (go_language_data): Delete la_get_symbol_name_matcher
initializer.
* language.c (default_symbol_name_matcher): Update header comment,
make static.
(language_defn::get_symbol_name_matcher): New definition.
(language_defn::get_symbol_name_matcher_inner): Likewise.
(get_symbol_name_matcher): Delete.
(unknown_language_data): Delete la_get_symbol_name_matcher
initializer.
(auto_language_data): Likewise.
* language.h (language_data): Delete la_get_symbol_name_matcher
field.
(language_defn::get_symbol_name_matcher): New member function.
(language_defn::get_symbol_name_matcher_inner): Likewise.
(default_symbol_name_matcher): Delete declaration.
* linespec.c (find_methods): Update call to
get_symbol_name_matcher.
* m2-lang.c (m2_language_data): Delete la_get_symbol_name_matcher
initializer.
* minsyms.c (lookup_minimal_symbol): Update call to
get_symbol_name_matcher.
(iterate_over_minimal_symbols): Likewise.
* objc-lang.c (objc_language_data): Delete
la_get_symbol_name_matcher initializer.
* opencl-lang.c (opencl_language_data): Likewise.
* p-lang.c (pascal_language_data): Likewise.
* psymtab.c (psymbol_name_matches): Update call to
get_symbol_name_matcher.
* rust-lang.c (rust_language_data): Delete
la_get_symbol_name_matcher initializer.
* symtab.c (symbol_matches_search_name): Update call to
get_symbol_name_matcher.
(compare_symbol_name): Likewise.

gdb: Convert language la_compute_program field to a method

This commit changes the language_data::la_compute_program function
pointer member variable into a member function of language_defn.

There should be no user visible changes after this commit.

gdb/ChangeLog:

* ada-lang.c (ada_language_data): Delete la_compute_program
initializer.
* c-lang.c (c_language_data): Likewise.
(c_language::compute_program): New member function.
(cplus_language_data): Delete la_compute_program initializer.
(cplus_language::compute_program): New member function.
(asm_language_data): Delete la_compute_program initializer.
(minimal_language_data): Likewise.
* c-lang.h (c_compute_program): Update comment.
(cplus_compute_program): Likewise.
* compile/compile-c-support.c (c_compute_program): Likewise.
(cplus_compute_program): Likewise.
* compile/compile.c (compile_to_object): Update call to
la_compute_program.
* d-lang.c (d_language_data): Delete la_compute_program
initializer.
* f-lang.c (f_language_data): Likewise.
* go-lang.c (go_language_data): Likewise.
* language.c (unknown_language_data): Likewise.
(auto_language_data): Likewise.
* language.h (language_data): Delete la_compute_program field.
(language_defn::compute_program): New member function.
* m2-lang.c (m2_language_data): Delete la_compute_program
initializer.
* objc-lang.c (objc_language_data): Likewise.
* opencl-lang.c (opencl_language_data): Likewise.
* p-lang.c (pascal_language_data): Likewise.
* rust-lang.c (rust_language_data): Likewise.

gdb: Convert language la_class_name_from_physname field to a method

This commit changes the language_data::la_class_name_from_physname function
pointer member variable into a member function of language_defn.

There should be no user visible changes after this commit.

gdb/ChangeLog:

* ada-lang.c (ada_language_data) Delete
la_class_name_from_physname initializer.
* c-lang.c (c_language_data): Likewise.
(cplus_language_data): Likewise.
(cplus_language::class_name_from_physname): New member function.
(asm_language_data): Delete la_class_name_from_physname
initializer.
(minimal_language_data): Likewise.
* d-lang.c (d_language_data): Likewise.
* dwarf2/read.c (guess_partial_die_structure_name): Update to call
method on language_defn class.
(guess_full_die_structure_name): Likewise.
* f-lang.c (f_language_data): Delete la_class_name_from_physname
initializer.
* go-lang.c (go_language_data): Likewise.
* language.c (language_class_name_from_physname): Delete.
(unk_lang_class_name): Delete.
(unknown_language_data): Delete la_class_name_from_physname
initializer.
(auto_language_data): Likewise.
* language.h (language_data): Delete la_class_name_from_physname
field.
(language_defn::class_name_from_physname): New function.
(language_class_name_from_physname): Delete declaration.
* m2-lang.c (m2_language_data): Delete la_class_name_from_physname
initializer.
* objc-lang.c (objc_language_data): Likewise.
* opencl-lang.c (opencl_language_data): Likewise.
* p-lang.c (pascal_language_data): Likewise.
* rust-lang.c (rust_language_data): Likewise.

Use macros for TUI window names

Christian pointed out that tui-layout.c hard-codes various window
names.  This patch changes the code to use the macros from tui-data.h
instead.  For each window, I searched for uses of the name; but I only
found any in tui-layout.c.  This also adds a new macro to account for
the "status" window.

gdb/ChangeLog
2020-06-16  Tom Tromey  <tom@tromey.com>

* tui/tui-data.h (STATUS_NAME): New macro.
* tui/tui-layout.c (tui_remove_some_windows)
(initialize_known_windows, tui_register_window)
(tui_layout_split::remove_windows, initialize_layouts)
(tui_new_layout_command): Don't use hard-coded window names.

Fix crash when exiting TUI with gdb -tui

PR tui/25348 points out that, when "gdb -tui" is used, then exiting
the TUI will cause a crash.

This happens because tui_setup_io stashes some readline variables --
but because this happens before readline is initialized, some of these
are NULL.  Then, when exiting the TUI, the NULL values are "restored",
causing a crash in readline.

This patch fixes the problem by ensuring that readline is initialized
first.  Back in commit 11061048d ("Give a name to the TUI SingleKey
keymap"), a call to rl_initialize was removed from
tui_initialize_readline; this patch resurrects the call, but moves it
to the end of the function, so as not to remove the ability to modify
the SingleKey map from .inputrc.

gdb/ChangeLog
2020-06-16  Tom Tromey  <tom@tromey.com>

PR tui/25348:
* tui/tui.c (tui_ensure_readline_initialized): Rename from
tui_initialize_readline.  Only run once.  Call rl_initialize.
* tui/tui.h (tui_ensure_readline_initialized): Rename from
tui_initialize_readline.
* tui/tui-io.c (tui_setup_io): Call
tui_ensure_readline_initialized.
* tui/tui-interp.c (tui_interp::init): Update.

Fix C-x 1 from gdb prompt

Pedro pointed out on irc that C-x 1 from the gdb prompt will cause a
crash.  This happened because of a bug in remove_windows -- it would
always remove all the windows from the layout.  This patch fixes this
bug, and also arranges to have C-x 1 preserve the status window.

gdb/ChangeLog
2020-06-16  Tom Tromey  <tom@tromey.com>

* tui/tui-layout.c (tui_layout_split::remove_windows): Fix logic.
Also preserve the status window.

Automatic date update in version.in

Fix crash when TUI window creation fails

If a TUI window is written in Python, and if the window construction
function fails, then gdb will crash.  This patch fixes the crash.

gdb/ChangeLog
2020-06-16  Tom Tromey  <tom@tromey.com>

* python/py-tui.c (tui_py_window::~tui_py_window): Handle case
where m_window==nullptr.

gdb/testsuite/ChangeLog
2020-06-16  Tom Tromey  <tom@tromey.com>

* gdb.python/tui-window.py (failwin): New function.  Register it
as a TUI window type.
* gdb.python/tui-window.exp: Create new "fail" layout.  Test it.

x86: Correct noavx512_vp2intersect

* config/tc-i386.c (cpu_arch): Correct noavx512_vp2intersect
cpu_arch to CPU_ANY_VP2INTERSECT_FLAGS.
* doc/c-i386.texi: Add avx512_vp2intersect.

Re: Use __asm__ rather than asm in ld testsuite

* testsuite/ld-elf/pr19553c.c: Replace asm with __asm__.
* testsuite/ld-elfvers/vers27b.c: Likewise.

Use __asm__ rather than asm in ld testsuite

* testsuite/ld-elf/pr23428.c: Define _DEFAULT_SOURCE.
* testsuite/ld-elf/indirect1b.c: Replace asm with __asm__.
* testsuite/ld-elf/indirect2.c: Likewise.
* testsuite/ld-elf/indirect3b.c: Likewise.
* testsuite/ld-elf/indirect4b.c: Likewise.
* testsuite/ld-elf/pr14323-2.c: Likewise.
* testsuite/ld-elf/pr18720b.c: Likewise.
* testsuite/ld-elf/pr23428.c: Likewise.
* testsuite/ld-elfvsb/common.c: Likewise.
* testsuite/ld-elfvsb/main.c: Likewise.
* testsuite/ld-elfvsb/sh1.c: Likewise.
* testsuite/ld-elfvsb/test.c: Likewise.
* testsuite/ld-pe/aligncomm-1.c: Likewise.
* testsuite/ld-pe/aligncomm-2.c: Likewise.
* testsuite/ld-pe/aligncomm-3.c: Likewise.
* testsuite/ld-pe/aligncomm-4.c: Likewise.
* testsuite/ld-plugin/pr23958.c: Likewise.
* testsuite/ld-size/size-1b.c: Likewise.
* testsuite/ld-size/size-2b.c: Likewise.
* testsuite/ld-size/size-3a.c: Likewise.
* testsuite/ld-size/size-3b.c: Likewise.
* testsuite/ld-size/size-3c.c: Likewise.
* testsuite/ld-size/size-4b.c: Likewise.
* testsuite/ld-size/size-5b.c: Likewise.
* testsuite/ld-size/size-6a.c: Likewise.
* testsuite/ld-size/size-7a.c: Likewise.
* testsuite/ld-size/size-8a.c: Likewise.
* testsuite/ld-size/size-9b.c: Likewise.
* testsuite/ld-size/size-10b.c: Likewise.

Use __asm__ rather than asm in gold testsuite

discard_locals_test.c:28:6: error: expected declaration specifiers or
‘...’ before string constant
 asm (".Lshould_be_discarded:");
      ^

* testsuite/discard_locals_test.c: Replace uses of asm with __asm__.
* testsuite/discard_locals_relocatable_test.c: Likewise.

Add two missing return values in gdb.python/py-nested-maps.c

Two functions in gdb.python/py-nested-maps.c are missing return
values.  This causes clang to fail to compile the file with the
following error:
  warning: control reaches end of non-void function [-Wreturn-type]

This commit fixes, by causing the two functions to return pointers
to the objects they've just allocated and initialized.  I didn't
investigate how this test had been passing with other compilers;
I'm assuming serendipity, that in each function the value to be
returned was already in the register it would need to be in to be
the function's return value.

gdb/testsuite/ChangeLog:

* gdb.python/py-nested-maps.c (create_map): Add missing return
value.
(create_map_map): Likewise.

Use CXXCOMPILE in gold/testsuite/Makefile for c++ testcases

I was playing with passing -std=c99 to an older version of gcc by
using CC="gcc-4 -std=c99", and ran into
cc1plus: error: command line option ‘-std=c99’ is valid for C/ObjC but
not for C++ [-Werror]
This obvious fix uses the correct compiler for a number of gold
testcases.

* testsuite/Makefile.am (export_dynamic_plugin.o): Use CXXCOMPILE.
(plugin_test_wrap_symbols_1.o): Likewise.
(plugin_test_wrap_symbols_2.o): Likewise.
* testsuite/Makefile.in: Regenerate.

x86: drop SSE4a from SSE check again

Upon re-consideration in commit 569d50f1c611 ("x86: further refine SSE
check (SSE4a, SHA, GFNI)") I went too far: Mixing of SSE and AVX insns
doesn't suffer as bad a penalty on AMD CPUs as on Intel ones. SSE4a
being an AMD-only extension, it shouldn't be part of the ISA extensions
set for which the diagnostic may get issued. Undo that part.

Really remove tic30-aout support

bfd/
* aout-tic30.c: Delete file.
* Makefile.am (BFD32_BACKENDS): Remove aout-tic30.lo.
(BFD32_BACKENDS_CFILES): Remove aout-tic30.c.
* config.bfd (c30-*-*aout*, tic30-*-*aout*): Remove entry.
(xc16x-*-elf): Sort properly.
* configure.ac: Remove tic30_aout_vec.
* targets.c: Likewise.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/SRC-POTFILES.in: Regenerate.
gas/
* config/tc-tic30.h: Remove OBJ_AOUT support.
* configure.tgt: Delete tic30-*-*aout* entry.
ld/
* emulparams/tic30aout.sh: Delete file.
* scripttempl/tic30aout.sc: Delete file.
* Makefile.am: Remove etic30aout.c from ALL_EMULATION_SOURCES and
delete dependency.
* configure.tgt: Delete tic30-*-*aout* entry.
* testsuite/ld-scripts/sane1.d: Delete tic30-*-aout mention.
* testsuite/ld-scripts/segment-start.d: Likewise.
* Makefile.in: Regenerate.
* po/BLD-POTFILES.in: Regenerate.

Automatic date update in version.in

xtensa: allow runtime ABI selection

2020-06-15  Max Filippov  <jcmvbkbc@gmail.com>
bfd/
* elf32-xtensa.c (XSHAL_ABI, XTHAL_ABI_UNDEFINED)
(XTHAL_ABI_WINDOWED, XTHAL_ABI_CALL0): New macros.
(elf32xtensa_abi): New global variable.
(xtensa_abi_choice): New function.
(elf_xtensa_create_plt_entry): Use xtensa_abi_choice instead of
XSHAL_ABI to select PLT code.

gas/
* config/tc-xtensa.c (XTHAL_ABI_WINDOWED, XTHAL_ABI_CALL0): New
macros.
(elf32xtensa_abi): New declaration.
(option_abi_windowed, option_abi_call0): New enum constants.
(md_longopts): Add entries for --abi-windowed and --abi-call0.
(md_parse_option): Add handlers for --abi-windowed and
--abi-call0.
(xtensa_add_config_info): Use xtensa_abi_choice instead of
XSHAL_ABI to format ABI tag.
* doc/as.texi (Target Xtensa options): Add --abi-windowed and
--abi-call0 to the list of options.
* doc/c-xtensa.texi: Add description for options --abi-windowed
and --abi-call0.
* testsuite/gas/xtensa/abi-call0.d: New test definition.
* testsuite/gas/xtensa/abi-windowed.d: New test definition.
* testsuite/gas/xtensa/abi.s: New test source.

include/
* elf/xtensa.h (xtensa_abi_choice): New declaration.

ld/
* emultempl/xtensaelf.em (XSHAL_ABI): Remove macro definition.
(XTHAL_ABI_UNDEFINED, XTHAL_ABI_WINDOWED, XTHAL_ABI_CALL0): New
macros.
(elf32xtensa_abi): New declaration.
(xt_config_info_unpack_and_check): Set elf32xtensa_abi if it is
undefined.  Use xtensa_abi_choice instead of XSHAL_ABI to test
ABI tag consistency.
(xtensa_add_config_info): Use xtensa_abi_choice instead of
XSHAL_ABI to format ABI tag.
(PARSE_AND_LIST_PROLOGUE): Define OPTION_ABI_WINDOWED,
OPTION_ABI_CALL0 and declare elf32xtensa_abi.
(PARSE_AND_LIST_LONGOPTS): Add entries for --abi-windowed and
--abi-call0.
(PARSE_AND_LIST_OPTIONS): Add help text for --abi-windowed and
--abi-call0.
(PARSE_AND_LIST_ARGS_CASES): Add handlers for --abi-windowed and
--abi-call0.
* ld.texi: Add description for options --abi-windowed and
--abi-call0.

gold, ld: Implement -z start-stop-visibility=... option.

gold/
Implement -z start-stop-visibility=... option.
* options.h (class General_options): Handle -z start-stop-visibility=.
(General_options::start_stop_visibility_enum): New public method.
(General_options::set_start_stop_visibility_enum): New private method.
(General_options::start_stop_visibility_enum_): New private member.
* options.cc (General_options::General_options): Add initializer.
(General_options::finalize): Set this->start_stop_visibility_enum_
from string value.
* layout.cc (Layout::define_section_symbols): Use option setting.

bfd/
* elflink.c (bfd_elf_define_start_stop): Use start_stop_visibility
field of bfd_link_info.

include/
* bfdlink.h (struct bfd_link_info): New field start_stop_visibility.

ld/
* NEWS: Mention -z start-stop-visibility=... option for ELF.
* ld.texi (Options): Document -z start-stop-visibility=... option.
* ldmain.c (main): Initialize link_info.start_stop_visibility.
* emultempl/elf.em (gld${EMULATION_NAME}_handle_option):
Parse -z start-stop-visibility=... option.

Change target_read_string API

This simplifies the target_read_string API a bit.

Note that some code was using safe_strerror on the error codes
returned by target_read_string.  It seems to me that this is incorrect
(if it was ever correct, it must have been quite a long time ago).

gdb/ChangeLog
2020-06-15  Tom Tromey  <tromey@adacore.com>

* windows-nat.c (windows_nat::handle_output_debug_string):
Update.
(windows_nat::handle_ms_vc_exception): Update.
* target.h (target_read_string): Change API.
* target.c (target_read_string): Change API.
* solib-svr4.c (open_symbol_file_object, svr4_read_so_list):
Update.
* solib-frv.c (frv_current_sos): Update.
* solib-dsbt.c (dsbt_current_sos): Update.
* solib-darwin.c (darwin_current_sos): Update.
* linux-thread-db.c (inferior_has_bug): Update.
* expprint.c (print_subexp_standard): Update.
* ada-lang.c (ada_main_name, ada_tag_name_from_tsd)
(ada_exception_message_1): Update.

Remove a use of target_read_string

linux-tdep.c:dump_mapping_p uses target_read_string, but in a way that
does not really make sense.  It's better to use target_read_memory
here.

gdb/ChangeLog
2020-06-15  Tom Tromey  <tromey@adacore.com>

* linux-tdep.c (dump_mapping_p): Use target_read_memory.

Rewrite target_read_string

This rewrites target_read_string in terms of read_string.

gdb/ChangeLog
2020-06-15  Tom Tromey  <tromey@adacore.com>

* valprint.c (read_string): Update comment.
* target.c (MIN): Remove.
(target_read_string): Rewrite.