package/bdwgc: only enable on supported architectures

bdwgc has support for a sub-set of the architectures we support.

Since there is roughly a 50-50 split of our architectures that have
support in bdwgc vs. those that do not, use a positive dependency logic,
rather than a negative one.

The list was constructed by visual inspection of the source code of
bdwgc, but the header doing the check is, to say it politely, a bit
difficult to read...

So, some working archotectures may be missing. Users needing it may
investigate if their architectures are indeed supported.

Fixes;
    http://autobuild.buildroot.net/results/529/529b0b6dd47744c13f56e59a4c669a3f5d56530d/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Pedro Aguilar <paguilar@paguilar.org>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ffmpeg: bump version to 2.4.4

- Bump version to 2.4.4.
- Remove upstreamed patch
- Add a hash file

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sysklogd: fix redundant newline escape

Broken since 428f1e7e70c6b (sysklogd: install configuration file
unconditionally). Fixes:

package/sysklogd/sysklogd.mk:21: *** missing 'endef', unterminated 'define'.  Stop.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

proftpd: remove redundant newline escape

Broken since 0e18b0a4e12e7 (proftpd: install configuration file
unconditionally). Fixes the following make error:

package/proftpd/proftpd.mk:49: *** missing 'endef', unterminated 'define'.  Stop.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ifplugd: remove spurious newline escape

Commit 5ad5d55924bcc (ifplugd: install configuration files unconditionally)
removed the conditional configuration file install, but left an redundant
newline escape, causing the following error:

package/ifplugd/ifplugd.mk:23: *** missing 'endef', unterminated 'define'.  Stop.

Fix this.

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mpd: install configuration file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

[Peter: use install -m as noted by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

inadyn: install configuration file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

php: install configuration file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

[Peter: use install -D]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

usbmount: install configuration file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

[Peter: fix indentation as noted by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

screen: install configuration file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sysklogd: install configuration file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ifplugd: install configuration files unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

[Peter: use install -m as noted by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

logrotate: install configuration file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

samba: install configuration file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

proftpd: install configuration file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

fluxbox: install session file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

input-event-daemon: install configuration file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

stunnel: install configuration file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

transmission: install init script unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

rsyslog: install init script and config file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Also, we take this opportunity to rename RSYSLOG_INSTALL_CONF_SCRIPT
to RSYSLOG_INSTALL_CONF because it is no longer installing an init
script.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

rpcbind: install init script unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lighttpd: install configuration files with sensible (0644) permissions

And use the same (0-prefixed) form everywhere.

Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lighttpd: install init script and config file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

iucode-tool: install init script unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dmraid: install init script unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

busybox: install init script and config file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

[Peter: drop && conditional from watchdog installation as noted by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

aiccu: install init script and config file unconditionally

As discussed, users should use a rootfs overlay or a post-build script
instead of a custom skeleton to override files installed by Buildroot,
so there is no point in having conditions when installing init scripts
or configuration files.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

xenomai: add error handling to for loop

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sound-theme-borealis: add error handling to for loop

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt5base: add error handling to for loop

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lockfile-progs: add error handling to for loop

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

live555: add error handling to for loop

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

jimtcl: add error handling to for loop

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

irda-utils: add error handling to for loop

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gptfdisk: add error handling to for loop

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

googlefontdirectory: add error handling to for loop

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

flot: add error handling to for loop

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ebtables: add error handling to for loop

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

coreutils: add error handling to for loop

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

alsa-utils: add error handling to for loop

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

rp-pppoe: bail out if installation fails

Add an "|| exit 1" in the installation loop, otherwise if one of the
file fails to install, the build doesn't abort.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

rp-pppoe: don't install man pages

We don't support installing documentation on the target, so there's no
point in having explicit code to do so.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gnupg: don't bother removing a man page

The target-finalize target in the main Makefile removes
$(TARGET_DIR)/usr/share/man entirely, so there's no point in having
some package specific logic to remove man pages.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pptp-linux: don't install man page

We don't support installing documentation on the target, so there's no
point in having explicit code to do so.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

iostat: remove legacy code

Some custom iostat-source target was mistakenly left in place when the
iostat package was migrated to gentargets in commit
ee77963588b09babfd71befb0b5eb9fd1e776bbc, back 4 years ago. This
commit removes this unnecessary custom target.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

iostat: ensure binary gets installed with proper permissions

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

iostat: don't install man page

We don't support installing documentation on the target, so there's no
point in having explicit code to do so.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tree: don't install man page

We don't support installing documentation on the target, so there's no
point in having explicit code to do so.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ndisc6: remove man page related code

The target-finalize target takes care of removing
$(TARGET_DIR)/usr/share/man, so there's no point in having package
specific code doing this.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

wipe: ensure binary gets installed with proper permissions

Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

wipe: don't install man pages

We don't support installing documentation on the target, so there's no
point in having explicit code to do so.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

snowball-init: use <pkg>_INSTALL_INIT_SYSV mechanism

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mpd: use <pkg>_INSTALL_INIT_SYSV mechanism

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

at: use <pkg>_INSTALL_INIT_SYSV mechanism

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tinyhttpd: use <pkg>_INSTALL_INIT_SYSV mechanism

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

openvpn: use <pkg>_INSTALL_INIT_SYSV mechanism

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tftpd: use <pkg>_INSTALL_INIT_SYSV mechanism

Also make sure we use a full path for the destination of the
$(INSTALL) command.

[Peter: use install -m as noted by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

xapp_xdm: use <pkg>_INSTALL_INIT_SYSV mechanism

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pango: use <pkg>_INSTALL_INIT_SYSV mechanism

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

olsr: use <pkg>_INSTALL_INIT_SYSV mechanism

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gpsd: use <pkg>_INSTALL_INIT_SYSV mechanism

Also makes the installation of the init script unconditional.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mongoose: use <pkg>_INSTALL_INIT_SYSV mechanism

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

netatalk: use <pkg>_INSTALL_INIT_SYSV mechanism

Also makes the installation of the init script unconditional.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

nfs-utils: use <pkg>_INSTALL_INIT_SYSV mechanism

Also move back the NFS_UTILS_INSTALL_FIXUP hook registration right
after the hook definition.

[Peter: use install -D as noted by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ifplugd: use <pkg>_INSTALL_INIT_SYSV mechanism

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

input-event-daemon: use <pkg>_INSTALL_INIT_SYSV mechanism

Also makes the installation of the init script unconditional.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

samba: use <pkg>_INSTALL_INIT_SYSV mechanism

Also makes the installation of the init script unconditional.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

proftpd: use <pkg>_INSTALL_INIT_SYSV mechanism

Also use a complete destination path for the $(INSTALL) command.

[Peter: use install -D as noted by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gdk-pixbuf: use <pkg>_INSTALL_INIT_SYSV mechanism

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

stunnel: use the <pkg>_INSTALL_INIT_SYSV mechanism

Since the existing STUNNEL_INSTALL_CONF_SCRIPT hook no longer installs
the init script, we rename it to STUNNEL_INSTALL_CONF.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

portmap: improve installation of binaries

This commit explicits the permissions with which executables are
installed, and also makes sure that the build is aborted if one of the
binaries cannot be installed, instead of silently ignoring the error.

[Peter: fixop typos in commit message as noted by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

portmap: don't install manpages

We no longer support having documentation on the target, so there's no
point in carrying code to install man pages.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

portmap: use <pkg>_INSTALL_INIT_SYSV mechanism

We also switch to using a full destination path as the second argument
of $(INSTALL).

[Peter: use install -D as noted by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

busybox: use <pkg>_INSTALL_INIT_SYSV mechanism

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

thttpd: use the <pkg>_INSTALL_INIT_SYSV mechanism

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

radvd: use <pkg>_INSTALL_INIT_SYSV

This commit changes the radvd to use the <pkg>_INSTALL_INIT_SYSV
mechanism instead of using a post install target hook. We also use a
full destination path when calling $(INSTALL).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

vsftpd: rename patches to the new naming convention

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

vsftpd: don't install manpages

Installing manpages to the target is quite useless, since we don't
support installing documentation on the target.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

vsftpd: use <pkg>_INSTALL_INIT_SYSV and rename init script

This commit changes the vsftpd package to use the
<pkg>_INSTALL_INIT_SYSV mechanism to install its init script, and
renames the init script in the Buildroot source tree to match how it's
named on the target.

Also, the init script is now installed unconditionally, as is done in
most packages.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ci20_defconfig: remove BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y

We had this option in the defconfig because the kernel defconfig we
provide doesn't have CONFIG_DEVTMPFS and CONFIG_DEVTMPFS_MOUNT, so a
/dev management which creates the devices dynamically using only
devtmpfs would not work. However, CONFIG_DEVTMPFS and
CONFIG_DEVTMPFS_MOUNT are automatically added to the kernel config when
you build the kernel using Buildroot, except when you choose
BR2_ROOTFS_DEVICE_CREATION_STATIC as a /dev management. This is handled
by linux/linux.mk.

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

samba4: bump to version 4.1.14

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Remove BR2_DEPRECATED_SINCE_2013_11

The symbol is unused so remove it.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

arch/mips: remove deprecated mips1/2/3/4 support

Remove the support for generating mips1/2/3/4 code since it has been
deprecated for more than a year now.
Also remove the unnecessary kludges in packages for it.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gcc/mpfr: remove deprecated features

Remove the fortran and objective C language support since these have
been deprecated since more than a year ago.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: mark EOL versions deprecated

Follow the upstream EOL cycle and mark 3.16 as deprecated for 2015.02.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Add BR2_DEPRECATED_SINCE_2015_02

In preparation for the deprecation of certain features in 2015.02, add
the BR2_DEPRECATED_SINCE_2015_02 symbol.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

elfutils: download portability patch

Download the portability patch into the buildroot tree.

This isn't nice but there really isn't another good solution for it.
The elfutils-portability.patch is version-dependent hence we already
have an older version for an older version of elfutils in the mirrors.
This causes hash check failures when fetching from sources.buildroot.net
But we can't remove (hence replace) the old version with the new one
since this would causee issues with older versions of
buildroot/elfutils for the same scenario.

Fixes:
http://autobuild.buildroot.net/results/26a/26afb92dc14fd0f85c0800dd4e034ea86af19fe2/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

xserver_xorg-server: libunwind support is broken on MIPS64 n32

Amend the former commit and disable xorg-server with libunwind support
only for MIPS64 n32, as stated in the bug report:

https://bugs.freedesktop.org/show_bug.cgi?id=79939

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lame: also disable debug handling on xtensa

Similar to the other architectures we have disabled it for. At the same time
also adjust the comment as we now do this for several other architectures.

Fixes http://autobuild.buildroot.net/results/b7e/b7e466580561e32fb584399e5914cd61a37bf7e9/

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

flac: drop CVE patches

These are alredy included in 1.3.1, and should have been dropped when I
merged next.

Reported-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Merge branch 'next'

Conflicts:
Makefile
package/flac/0001-fix-altivec-logic.patch
package/grantlee/Config.in

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2014.11

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gdb: unbreak host-gdb with python support if python3 is enabled

Fixes http://autobuild.buildroot.net/results/ef4/ef487b495e57f098af0fe9508d430b56b0750339/

Explicitly pass the path to host-python to ensure it gets used.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/parted: fix static link

libuuid needs to be linked with -lintl when gettext is needed (with
locales).

For a shared build, this is solved with the DT_NEEDED ELF tags, but for
a static link, it is not pulled in automatically.

Use pkg-config to find libuuid, instead of AC_CHECK_LIB().

Second part at fixing:
    http://autobuild.buildroot.net/results/c46/c467aeec258909bb82eda77123803944f97d8df8/

[Peter: add host-pkgconf to _DEPENDENCIES]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/util-linux: libuuid needs -lintl

When gettext is needed (with locales), libuuid needs to be linked
against -lintl.

In dynamic link, this is solved via the DT_NEEDED ELF tag, but for
static links, it does not get pulled in automatically.

Fix that by adding a Libs.private section to uuid.pc, but only if
it needed.

First part at fixing:
    http://autobuild.buildroot.net/results/c46/c467aeec258909bb82eda77123803944f97d8df8/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/shairport-sync: fix static builds

Because shairport-sync uses AC_CHECK_LIB to find some of the needed
libraries (opensl, alsa, popt...), it fails to bring in the dependencies
of those libraries; for example, -lssl requires -lz.

When doing a dynamically-linked build, those dependent libraries are
pulled in thanks to the DT_NEEDED ELF tags, but those are not available
in static libraries.

Use PKG_CHECK_MODULES instead of AC_CHECK_LIB, and emulate the results
of AC_CJECK_LIB (i.e. set the HAVE_LIBxxx and the LIBS variable
appropriately) to minimise the amount of code touched.

This should fix:
    http://autobuild.buildroot.net/results/1a5/1a56dbff3583bed0d693508dfc16859086846ecd/
    http://autobuild.buildroot.net/results/6d5/6d5a8157592f7a2c9469bf71b0453796ef982ab1/

At the same time, remove a comment at the end of a variable assignment,
since this has proven to cause some problems.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jörg Krause <jkrause@posteo.de>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

infra: do not append an empty LD_LIBRARY_PATH

When we set LD_LIBRARY_PATH when building our host tools, we append any
pre-existing value to our custom path:
        LD_LIBRARY_PATH="$(HOST_DIR)/usr/lib:$(LD_LIBRARY_PATH)"

But then if LD_LIBRARY_PATH was previously empty, we end up with an
LD_LIBRARY_PATH that ends with a colon.

Also, when we check that an existing LD_LIBRARY_PATH does not contain
CWD, we previously did not look for a zero-length prefix.

Since 'man ld.so' says of LD_LIBRARY_PATH:
    A colon-separated list of directories in which to search for ELF
    libraries at execution-time. Similar to the PATH environment
    variable.

And POSIX states about PATH:
    A zero-length prefix is a legacy feature that indicates the current
    working directory.

And bash also recognises a zero-length prefix to search in CWD:
    A zero-length (null) directory name in the value of PATH indicates
    the current directory.

We may thus end up on a system where a zero-length prefix in
LD_LIBRARY_PATH is interpreted as CWD.

Do not append the previous LD_LIBRARY_PATH if it was empty, and check
for a zero-length prefix when checking dependencies.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/mono: fixing wrong monolite library path

Due to a bug in makefile logic, monolite libraries path will not
be selected when EXTERNAL_MCS parameter is specified.
Setting EXTERNAL_MCS to a non existent binary, makes the internal logic
to fallback to monolite, setting correctly both binary and
library paths.
This has the benefit to force host-mono to always use monolite as
bootstrap compiler also in case a mono compiler is already installed
on the system.

Fixes:
http://autobuild.buildroot.net/results/fc00952bef03cf3b4785be1a0d9c08dc84aa3f54/

[Peter: add comment explaining why this is done]
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Reported-by: Rainer Berns <rainer.berns@berns-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libwebsockets: fix static build

Fixes:
http://autobuild.buildroot.net/results/afc/afc56e03a9d410563f43e5d26cf8b12fc4da7e5b/
http://autobuild.buildroot.net/results/922/9221b4967d069c9b634cb1f98ead193593d22dbc/

When the version was bumped, the existing patch to fix static linking
was not proprerly tested, and was missing three new locations to be
fixed.

[Peter: add autobuilder reference]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Sagaert Johan <sagaert.johan@skynet.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gd: fix build when libiconv is enabled

First of two patches to fix
http://autobuild.buildroot.net/results/238/2386edb7f95920e84a35811a33f4333ee0a7a860/

gd links against libiconv if it is already built, depend on libiconv
to get reproducable builds.

readelf output without libiconv present:
$ output/host/opt/ext-toolchain/bfin-linux-uclibc/bin/bfin-linux-uclibc-readelf \
  -a output/staging/usr/lib/libgd.a | grep iconv
    15: 00000000    12 FUNC    GLOBAL HIDDEN     1 _iconv_open
    16: 0000000c    12 FUNC    GLOBAL HIDDEN     1 _iconv
    17: 00000018    12 FUNC    GLOBAL HIDDEN     1 _iconv_close

readelf output with libiconv present:
$ output/host/opt/ext-toolchain/bfin-linux-uclibc/bin/bfin-linux-uclibc-readelf \
  -a output/staging/usr/lib/libgd.a | grep iconv
000000e4  0000100a R_BFIN_PCREL24    00000000   _libiconv_open + 0
00000140  0000140a R_BFIN_PCREL24    00000000   _libiconv + 0
0000019a  0000160a R_BFIN_PCREL24    00000000   _libiconv_close + 0
    16: 00000000     0 NOTYPE  GLOBAL DEFAULT  UND _libiconv_open
    20: 00000000     0 NOTYPE  GLOBAL DEFAULT  UND _libiconv
    22: 00000000     0 NOTYPE  GLOBAL DEFAULT  UND _libiconv_close

[Peter: also add to LIBS so it ends up in gdlib-config --libs output]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>