grub/grub2: drop unnecessary dependency on uclibc

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

grub2: remove GRUB2_ARCH_SUPPORTED

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

grub: remove GRUB_SUPPORTED_ARCH

grub can already only be selected for x86 and x86_64. No need to check
again for this in grub.mk.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

defconfigs: remove references to old U-Boot versions

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

u-boot: use BR2_TARGET_UBOOT_VERSION instead of BR2_UBOOT_VERSION

In order to be coherent with all other BR2_TARGET_UBOOT_* options.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

u-boot: beautify option prompts

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

u-boot: re-add infrastructure to specify custom tarball

The bootloader being very specific to the hardware, being able to
build U-Boot from an arbitrary tarball available on the web might be
needed.

Therefore, for U-Boot, we provide two methods :

 * Get a given stable version from U-Boot official FTP server

 * Get an arbitrary tarball

This should hopefully satisfy most needs, without complicating too
much the U-Boot build procedure on Buildroot side.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

u-boot: add a few comments

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

u-boot: remove unused U_BOOT_TARGET_TOOLS variable

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

u-boot: further simplify the configuration

Remove all the bootsource selection mechanism and the horribly
complicated BR2_TARGET_UBOOT_DEFAULT_ENV thing, which wanted to be
generic, but was in fact very AT91-specific.

Just keep things simple: we build U-Boot with the board configuration
file specified in BR2_TARGET_UBOOT_BOARDNAME.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

u-boot: support building for mkimage

To build mkimage for the host (which is needed to build an uImage of
the kernel), it is not necessary to configure U-Boot, and therefore to
have a particular board selected.

Therefore, this commit:

 * Adds a verification at U-Boot configure step that a U-Boot board
   name has been defined

 * Sets a default U-Boot version if none has been specified, so that
   even when U-Boot isn't selected but we want to build mkimage for
   the host, a particular U-Boot version is picked.

 * Make the host mkimage target depend only on U-Boot being
   downloaded/extracted/patched, and the target mkimage/fw_printenv
   targets depend on U-Boot being fully configured.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

u-boot: remove useless symbolic link

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

u-boot: remove patch for obsolete version

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

u-boot: simplify custom patch handling

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

u-boot: remove reference to old 1.2.0-atmel version

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

u-boot: remove u-boot-status make target

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

u-boot: remove arch specific patches infrastructure

A very complicated infrastructure for just a special case, for an
ancient version of U-Boot. Recent versions of U-Boot are reported to
work just fine on Atmel ARM evaluation boards.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

u-boot: remove option to configure download site

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

u-boot: rename Makefile.in to u-boot.mk for coherency

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

u-boot: remove ancient versions

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

u-boot: do not default to $(BOARD_NAME) for the board name

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

boot: remove references to COPYTO

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

yaboot: drop support

Yaboot does not build, hasn't been updated since a long time, and
isn't very common these days on embedded PowerPC platforms.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

bootloaders: move bootloader build code to boot/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

file: don't force _GNU_SOURCE in CFLAGS

Breaks the build with BR2_CONFIG_CACHE, and isn't needed anyway, as
the configure script figures out to add _GNU_SOURCE to config.h
anyway.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

skeleton: remove loopback interface configuration from inittab

The lo interface is marked auto in /etc/network/interfaces, so the
configuration of the loopback network interface is part of the
S40network init script. This causes the "RTNETLINK answers: File exists" error
message to appear at startup time.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

dependencies.sh: fix CWD in PATH check

Closes #1999

Signed-off-by: Nick Leverton <nick@leverton.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

file: use new-style target override for uninstall

As suggested by Thomas.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Set correct GCC tune option for ARM926T(==ARM926EJ-S) core

Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gstreamer: remove --disable-registry from configure options

--disable-registry has no dependency on libxml2 and should not be
linked to BR2_PACKAGE_GSTREAMER_LIBXML2. If we want to disable
registry then we should add another option.

Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

cdrkit: fix build by adding zlib as dependency

Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xkeyboard-config: Depends on host-intltool

Closes #1813

Signed-off-by: Paul Jones <paul@pauljones.id.au>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

lmbench: convert to generic package infrastructure

Closes #1753

Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

file: bump version and migrate to autotargets

Closes #1927

[Peter: host-zlib is a dependency of host-file, not file]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

intltool: Fix spelling mistake

Closes #1987

intltool.mk has a typo, this patch fixes the problem.

Signed-off-by: Paul Jones <paul@pauljones.id.au>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Iptables: needs host-pkg-config

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gawk: bump version and migrate to autotargets

Closes #1933

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

sqlite: bump version

Closes #1957

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

CHANGES: #1807 is resolved

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

openssl: bump version, enable mdc2+camellia+tlsext

Closes #1951

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

php: add sqlite3 dependency when using external

Closes #1945

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

tn5250: bump version and convert to autotargets

Closes #1903

[Peter: add --without-ssl when openssl isn't enabled]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libusb: bump version

Closes #1897

[Peter: bump to 1.08 instead]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

modutils: remove package

It's for ancient 2.4 kernels, and busybox has a modutils applet.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

qt: fix libQtMultimedia installation

With BR2_PACKAGE_QT_MULTIMEDIA=y, libQtMultimedia.so.* was not
copied to the target directory.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

New lua modules: wrap them up in a submenu

Closes #1885

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

New lua module: xavante

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

New lua module: wsapi

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

New lua module: copas

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

New lua module: luasocket

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

New lua module: cgilua

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

New lua module: rings

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

New lua module: coxpcall

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

New lua module: luafilesystem

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

package/config: also add gconfig change to patch

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

iptables: bump version, make it smaller with IPV6=n

Closes #1879

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

jffs2: let makedevs create device files

The common filesystem infrastructure in fs/common.mk uses a smart
combination of makedevs and fakeroot to create the device files in the
target filesystem images without being root. This technique is applied
to all filesystem formats that rely on this common infrastructure, and
JFFS2 is one of them.

Therefore, using the -D option of mkfs.jffs2, which allows to specify
a device table, is redundant with the usage of makedevs. And it is
worst than redundant: for some reason, -D does not create all device
files with the correct major and minor numbers, as reported in
bug #1771.

For coherence, we just remove the usage of mkfs.jffs2 -D option, and
rely on makedevs/fakeroot to create the device files.

This commit fixes bug #1771.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Makefile: support gconfig (GTK-based configurator) similar to xconfig

Support the GTK variant of the graphical kconfig configurator as an
alternative to the Qt3-based one.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Makefile: cleanup *conf targets

The make targets for the kconfig conf/mconf/qconf are almost identical,
so us a single rule for it.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kconfig: fix qconf (make xconfig) linking

qconf is written in C++, so use HOSTCXX instead of HOSTCC, and pass the
correct flags.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

cdrkit: fix build on uClibc

cdrkit unconditionally enables code using rcmd(3), which isn't available
on uClibc.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libidn: fix build with config.cache, autoconf and emacs

libidn contains a few elisp files, and it's configure script checks for
emacs to know if it should install them. This is not important for BR as
we don't have emacs, but configure fails if it's available on the host,
config.cache is used and autoconf has already been used as that loads
EMACS="no" into the cache.

Fix it by also setting EMACS="no" here.

At the same time, fix up trailing spaces in Config.in.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

netperf: fix build with uClibc 0.9.31

Closes #1909

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kernel-headers: add 2.6.34

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kernel-headers: bump 2.6.32.x stable version

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

CHANGES: 2010.08 development started

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

docs/news.html: add 2010.05 announcement

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

update for 2010.05

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xserver_xorg-server: Use $(MAKE1) for make install

Xserver installation fails with parallel make jobs.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Revert "xserver_xorg-server: Use $(MAKE1) for make install"

This reverts commit b7acacaf6e84ec05ed76dd419e645cfbd6683f7a.

Closes #1855

We DO need to install into staging for all the xdriver-* packages,
so revert this commit.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Revert "Add -rpath option for host package compilation"

Closes #1789

This reverts commit 6b939d40f6a29a43277566adc9d4312d49cb3abf.

The problem this commit tries to fix is valid, but the fix unfortunately
seems to cause worse problems on certain distributions/setups, so revert
for now.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

lockfile-progs: use correct CFLAGS

Use the correct CFLAGS from BR and not just the LDFLAGS. This is especially
important for external toolchain setups, but the lockfile-progs buildsystem
also hardcodes -Werror, which breaks the build in certain setups.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

ncftp: bump version

Due to recent 3.2.4 release, 3.2.2 download address has changed, so
I prefered bump version to 3.2.4 rather than changing NCFTP_SITE.

Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

external toolchain: also copy the libthread_db.so for gdbserver

gdbserver dlopen(3)s libthread_db.so at runtime, so there is no
dependency on it (does not appear as being (NEEDED)).

Copy libthread_db.so from external toolchain when gdbserver is enbled.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

toolchain/external: only copy the pthread lib if needed

If threads are disabled, do not try to copy the libpthread.so from the
external library.

It is still expected that the BR configuration matches the external
toolchain setup, and no check is done to enforce that.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

CHANGES: xserver-xorg has been changed

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

xserver_xorg-server: Use $(MAKE1) for make install

Xserver installation fails with parallel make jobs.

Installation to staging is not needed. So just remove it
instead of converting to $(MAKE1).

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Remove locale dependency from xserver

XServer compiles just fine without locale support

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

libcap: fix build issue when host pam is around

Closes #1843

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

coreutils: add 'join'

coreutils: add 'join' to the list of files that are copied to target
rootfs.

Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

linux: zImage target no longer available on x86

The legacy zImage target for x86 was removed from the kernel in 2.6.30,
and we state in Config.in that we'll use bzImage if BR2_PACKAGE_LINUX_FORMAT
isn't set, so ensure we do so for x86.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

hal: dbus expat option is BR2_DBUS_EXPAT

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

update for 2010.05-rc3

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Merge branch 'pkg-stats-fixes' of git://git.busybox.net/~tpetazzoni/git/buildroot

Merge branch 'graph-dependencies' of git://git.busybox.net/~tpetazzoni/git/buildroot

microperl: fix build with /bin/sh = dash

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

kernel-headers: bump 2.6.27.x / 2.6.32.x / 2.6.33.x stable versions

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

CHANGES: #75 + #699 are now closed

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

Merge branch 'dependencies-fixes' of git://git.busybox.net/~tpetazzoni/git/buildroot

gob2: workaround configure misdetecting library needed for flex

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

uClibc: 0.9.31 defconfig: disable FORCE_SHAREABLE_TEXT_SEGMENTS

Works around issues with non-fPIC libraries.

Reported-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

iperf: override bool detection

The configure script contains a buggy test for the bool datatype and
it's size. This is normally not a big deal as the result isn't used
for anything, but when BR2_CONFIG_CACHE (default) is used, the
wrong ac_cv_type_bool result is stored in the cache, and other packages
like libcurl DO need the bool type, so that breaks the build.

Fix it by presetting those tests to sane values.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

gst-plugins-base: make sure alsa-lib is detected if present

Make sure alsa-lib is built before gst-plugins-base if enabled, so
configure detects the presence of alsa and builds alsasink/src.

Reported-by: Phil Edworthy <Phil.Edworthy@renesas.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

vsftpd: fix build without largefile support

Fix lfs patch to include <features.h> before checking any of the
uClibc defines.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

valgrind: broken on ppc

Valgrind 3.2.3 needs linux/a.out.h, which hasn't been exported on ppc
since 2.6.28.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

fs/squashfs: squashfs3 needs to set big/little endian

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

squashfs,squashfs3: needs LARGEFILE support in toolchain

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

busybox skeleton: allow logins from ttymxc[0-2]

Add ttymxc[0-2] to the list is the /etc/securetty of the Busybox skeleton.
This is useful for serial logins on i.MX based systems. The same serial
devices already appear in the generic "target_skeleton/".

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

olsr: needs IPv6 support in toolchain

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

ntfsprogs: needs largefile support in toolchain

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>