* gdbtypes.h (struct language_defn): Add forward declaration.
(lookup_typename): Add LANGUAGE and GDBARCH parameters.
(lookup_unsigned_typename): Likewise.
(lookup_signed_typename): Likewise.
* gdbtypes.c (lookup_typename): Add LANGUAGE and GDBARCH parameters.
Use them instead of current_language and current_gdbarch.
(lookup_unsigned_typename): Add LANGUAGE and GDBARCH parameters.
Pass them to lookup_typename.
(lookup_signed_typename): Likewise.

* c-exp.y: Pass parse_language and parse_gdbarch to
lookup_unsigned_typename and lookup_signed_typename.
* objc-exp.y: Likewise.
* m2-exp.y: Pass parse_language and parse_gdbarch to lookup_typename.

* c-lang.c (evaluate_subexp_c): Pass expression language and
gdbarch to lookup_typename.
* printcmd.c (printf_command): Pass current language and
gdbarch to lookup_typename.
* python/python-type.c (typy_lookup_typename): Likewise.
Include "language.h".

* sparc64-nat.c (sparc64_gregset_supplies_p): Add GDBARCH parameter.
Use it instead of current_gdbarch.  Pass architecture to
sparc32_gregset_supplies_p.
(sparc64_fpregset_supplies_p): Add GDBARCH parameter.  Use it instead
of current_gdbarch.  Pass architecture to sparc32_fpregset_supplies_p.
* sparc64nbsd-nat.c (sparc64nbsd_gregset_supplies_p,
sparc64nbsd_fpregset_supplies_p): Likewise.
* sparc-nat.c (sparc_gregset_supplies_p, sparc_fpregset_supplies_p):
Add GDBARCH parameter.
(sparc32_gregset_supplies_p, sparc32_fpregset_supplies_p): Likewise.
(sparc_fetch_inferior_registers): Pass regcache architecture to
sparc_gregset_supplies_p and sparc_fpregset_supplies_p.
(sparc_store_inferior_registers): Likewise.
* sparc-nat.h (sparc_gregset_supplies_p, sparc_fpregset_supplies_p:
Add GDBARCH parameter.
(sparc32_gregset_supplies_p, sparc32_fpregset_supplies_p): Likewise.

* ada-tasks.c (read_known_tasks_array): Use target_gdbarch instead
of current_gdbarch.
* aix-thread.c (pd_enable): Likewise.
* amd64-linux-nat.c (ps_get_thread_area): Likewise.
* bsd-uthread.c (bsd_uthread_activate): Likewise.
* linux-nat.c (linux_nat_info_proc_cmd): Likewise.
* linux-thread-db.c (enable_thread_event): Likewise.
* monitor.c (monitor_write_memory, monitor_read_memory): Likewise.
* nto-procfs.c (procfs_open): Likewise.
* procfs.c (invalidate_cache, procfs_insert_watchpoint,
info_proc_mappings, info_mappings_callback): Likewise.
* record.c (record_open): Likewise.
* rs6000-nat.c (ARCH64): Likewise.
* solib-darwin.c (darwin_solib_create_inferior_hook): Likewise.
(darwin_bfd_open): Likewise.
* memattr.c (mem_info_command): Likewise.

* windows-nat.c (win32_resume): Use current regcache architecture
instead of current_gdbarch.

* dbug-rom.c (dbug_regname): Remove check against number of
registers in current_gdbarch.
* solib-pa64.c (read_dynamic_info): Remove unused variable.

* dummy-frame.c (deprecated_pc_in_call_dummy): Add GDBARCH parameter,
use it instead of current_gdbarch.
* frame.h (deprecated_pc_in_call_dummy): Add GDBARCH parameter.
* arm-tdep.c (arm_skip_prologue): Pass architecture to
deprecated_pc_in_call_dummy.

* symtab.c (skip_prologue_using_sal): Add GDBARCH parameter.
Use it instead of current_gdbarch.
* symtab.h (skip_prologue_using_sal): Add GDBARCH parameter.
* breakpoint.c (expand_line_sal_maybe): Pass architecture to
skip_prologue_using_sal.
* arm-tdep.c (skip_prologue_using_sal): Likewise.
* lm32-tdep.c (lm32_skip_prologue): Likewise.
* m32-tdep.c (m32c_skip_prologue): Likewise.
* mips-tdep.c (mips_skip_prologue): Likewise.
* moxie-tdep.c (moxie_skip_prologue): Likewise.
* mt-tdep.c (mt_frame_unwind_cache): Likewise.
* rs6000-tdep.c (rs6000_skip_prologue): Likewise.
* frv-tdep.c (frv_analyze_prologue): Add GDBARCH parameter, pass
it to skip_prologue_using_sal.  Update call sites ...
(frv_skip_prologue, frv_frame_unwind_cache): ... here.

* mn10300-tdep.c (struct mn10300_prologue): Add GDBARCH member.
(check_for_saved): Use it instead of current_gdbarch.
(mn10300_analyze_prologue): Set it.

* value.c (using_struct_return): Add GDBARCH parameter.  Use it
instead of current_gdbarch.
* value.h (using_struct_return): Add GDBARCH parameter.
* eval.c (evaluate_subexp_standard): Pass architecture to
using_struct_return.
* infcall.c (call_function_by_hand): Likewise.
* stack.c (return_command): Likewise.
* sparc-tdep.c (sparc32_push_dummy_code): Likewise.

* symtab.c (in_prologue): Add GDBARCH parameter.  Use it instead of
current_gdbarch.
* symtab.h (in_prologue): Add GDBARCH parameter.
* infrun.c (handle_inferior_event): Pass architecture to in_prologue.

* eval.c (evaluate_subexp_standard): Use expression architecture
instead of current_gdbarch.

* c-lang.c (evaluate_subexp_c): Use expression architecture and
language instead of current_gdbarch and current_language.

* printcmd.c (do_one_display): Use expression architecture instead
of current_gdbarch.

* infcmd.c (print_return_value): Use architecture of stop_regcache
instead of current_gdbarch.
(print_vector_info, print_float_info): Remove GDBARCH argument,
use frame architecture instead.
(vector_info, float_info): Update calls.

* objc-lang.c (objc_skip_trampoline): Use frame architecture
instead of current_gdbarch.

* parse.c (write_dollar_variable): Use parse architecture instead
of current_gdbarch.

* source.c (line_info): Use objfile architecture instead of
current_gdbarch.

* symtab.c (find_function_start_sal): Use gdbarch instead of
current_gdbarch.
(print_msymbol_info): Use objfile architecture instead of
current_gdbarch.

* valops.c (value_assign): Use frame architecture instead of
current_gdbarch.

* buildsym.c (record_line): Remove call to gdbarch_addr_bits_remove.

* coffread.c (coff_symtab_read): Call gdbarch_addr_bits_remove before
calling record_line.
(enter_linenos): Likewise.
* dbxread.c (process_one_symbol): Likewise.
* dwarf2read.c (dwarf_decode_lines): Likewise.
* mdebugread.c (psymtab_to_symtab_1): Likewise.
* xcoffread.c (enter_line_range): Likewise.

* ax-gdb.c (gen_bitfield_ref): Add EXP argument, use expression
architecture instead of current_gdbarch.
(gen_struct_ref): Add EXP argument, pass to get_bitfield_ref.
(gen_expr): Pass expression to get_struct_ref.

* symtab.h (struct symbol_ops): Add GDBARCH parameter to
tracepoint_var_ref callback.
* ax-gdb.c (gen_var_ref): Pass architecture to tracepoint_var_ref
symbol operation callback.
* dwarf2loc.c (dwarf2_tracepoint_var_ref): Add GDBARCH parameter.
Use it instead of current_gdbarch.
(locexpr_tracepoint_var_ref): Add GDBARCH parameter.  Pass it to
dwarf2_tracepoint_var_ref.
(loclist_tracepoint_var_ref): Likewise.

* prologue-value.c (make_pv_area): Add ADDR_BIT argument.
Use it instead of address bits of current_gdbarch.
* prologue-value.c (make_pv_area): Add ADDR_BIT argument.
* arm-tdep.c (thumb_analyze_prologue): Pass address bits to
make_pv_area.
(arm_scan_prologue): Likewise.
* m32c-tdep.c (m32c_analyze_prologue): Likewise.
* mep-tdep.c (mep_analyze_prologue): Likewise.
* mn10300-tdep.c (mn10300_analyze_prologue): Likewise.
* s390-tdep.c (s390_analyze_prologue): Likewise.

ChangeLog:

* mi/mi-main.c (mi_cmd_data_list_register_names): Use selected
frame architecture instead of current_gdbarch.
(mi_cmd_data_list_changed_registers): Likewise.
(mi_cmd_data_list_register_values): Likewise.  Pass selected
frame to get_register.
(get_register): Add FRAME argument, use it as frame to retrieve
registers from (instead of selected frame).  Use frame architecture
instead of current_gdbarch.
(mi_cmd_data_write_register_values): Use current regcache
architecture instead of current_gdbarch.

testsuite/ChangeLog:

* gdb.mi/gdb680.exp: Update test for error message.

* tui/tui-regs.c (tui_show_register_group): Remove GDBARCH parameter;
use frame architecture instead.  Replace current_gdbarch uses.
(tui_show_registers): Update call.
(tui_get_register): Remove GDBARCH parameter; use frame architecture
instead.
(tui_show_register_group): Update call.
(tui_check_register_values): Likewise.
(tui_register_format): Remove GDBARCH parameter; use frame
architecture instead.  Replace current_gdbarch uses.
(tui_get_register): Update call.

* gdbarch.sh (construct_inferior_arguments): Remove.
* gdbarch.c, gdbarch.h: Regenerate.
* infcmd.c (get_inferior_args): Call construct_inferior_arguments
directly instead of gdbarch_construct_inferior_arguments.
(construct_inferior_arguments): Remove GDBARCH argument.
* inferior.h (construct_inferior_arguments): Likewise.

* symfile.c (section_is_mapped): Use objfile architecture instead
of current_gdbarch.
(TARGET_LONG_BYTES): Remove.
(read_target_long_array): Add SIZE argument.  Use it instead of
TARGET_LONG_BYTES.
(simple_read_overlay_table): Retrieve long size from objfile
architecture; pass it to read_target_long_array.
(simple_read_overlay_region_table): Likewise.
(simple_overlay_update_1): Likewise.

* infrun.c (cleanup_displaced_step_closure): Remove.
(displaced_step_clear_cleanup): Move to before displaced_step_prepare.
(displaced_step_prepare): Use displaced_step_clear_cleanup instead
of cleanup_displaced_step_closure.
(handle_inferior_event, keep_going): Use thread architecture instead
of current_gdbarch.

ChangeLog:

* infrun.c (handle_inferior_event): Use current frame architecture
or thread architecture instead of current_gdbarch.  Pass to
handle_step_into_function and handle_step_into_function_backward.
(handle_step_into_function): Add GDBARCH parameter.  Use it instead
of current_gdbarch.
(handle_step_into_function_backward): Likewise.
(insert_step_resume_breakpoint_at_frame): Use frame architecture
instead of current_gdbarch.
(insert_step_resume_breakpoint_at_caller): Likewise.

testsuite/ChangeLog:

* gdb.base/annota1.exp: Allow multiple occurrences of the
frames-invalid annotation.
* gdb.cp/annota2.exp: Likewise.

2009-06-17  H.J. Lu  <hongjiu.lu@intel.com>

* elf32-arm.c (create_got_section): Get existing .rela.got
section.
* elf32-hppa.c (elf32_hppa_create_dynamic_sections): Likewise.
* elf32-lm32.c (create_got_section): Likewise.
* elf32-m32r.c (create_got_section): Likewise.
* elf32-ppc.c (ppc_elf_create_got): Likewise.
* elf32-s390.c (create_got_section): Likewise.
* elf32-sh.c (create_got_section): Likewise.
* elf32-xtensa.c (elf_xtensa_create_dynamic_sections): Likewise.
* elf64-s390.c (create_got_section): Likewise.
* elfxx-sparc.c (create_got_section): Likewise.

* elflink.c (_bfd_elf_create_got_section): Properly initialize
the GOT size.

2009-06-17  Michael Eager <eager@eagercon.com>

        * COPYING.LIBGLOSS: Add Xilinx license.

Undo accidental checkin of bogus change

* infcmd.c (post_create_inferior): Call breakpoint_re_set after target
is pushed for watchpoint promotion to hardware watchpoint.

*** empty log message ***

daily update

2009-06-16  Paul Pluzhnikov  <ppluzhnikov@google.com>

* dwarf2read.c (dwarf_info_section, dwarf_abbrev_section)
(dwarf_line_section, dwarf_pubnames_section, dwarf_aranges_section)
(dwarf_loc_section, dwarf_macinfo_section, dwarf_str_section)
(dwarf_ranges_section, dwarf_frame_section)
(dwarf_eh_frame_section): Removed.
(dwarf2_resize_section): Likewise.
(dwarf2_read_section): Now static, use bfd_mmap() if possible.
(dwarf2_get_section_info): New function.
(munmap_section_buffer): Likewise.
(dwarf2_per_objfile_cleanup): Likewise.
(section_is_p): Signature change.
* dwarf2-frame.c (dwarf2_build_frame_info): Use
dwarf2_get_section_info instead of dwarf2_read_section.

2009-06-16  Paul Pluzhnikov  <ppluzhnikov@google.com>

* solib.c (symbol_add_stub): New FLAGS parameter.
(solib_read_symbols): FROM_TTY -> FLAGS, call symbol_add_stub
directly.
(solib_add): Defer breakpoint_re_set until after all solibs.
* bsd-uthread.c (bsd_uthread_solib_loaded): Adjust.
* rs6000-nat.c (objfile_symbol_add): Adjust.
* symfile.c (syms_from_objfile): Merge parameters into ADD_FLAGS.
(new_symfile_objfile): Likewise.
(symbol_file_add_with_addrs_or_offsets): Likewise.
(symbol_file_add_from_bfd): Likewise.
(symbol_file_add): Likewise.
* symfile.h (enum symfile_add_flags): New. Adjust prototypes.
* symfile-mem.c (symbol_file_add_from_memory): Adjust.
* windows-nat.c (safe_symbol_file_add_stub): Adjust.
* machoread.c (macho_oso_symfile, macho_symfile_read): Adjust.

* linespec.c (collect_methods): Delete.
(add_matching_methods): Reove destructor special case.
(find_method): Call find_methods directly instead of
collect_methods.
* valops.c (value_struct_elt): Remove destructor
special cases.
(check_field): Likewise.
(value_struct_elt_for_reference): Likewise.
(destructor_name_p): Remove misleading comment about dtors
being "special cases".
* gdbtypes.h (get_destructor_fn_field): Remove. No longer needed.
* gdbtypes.c (get_destructor_fn_field): Likewise.

* mi/mi-main.c (mi_cmd_data_read_memory): Dispatch
TARGET_OJECT_MEMORY reads to the topmost target, not the the
flattened current_target.

2009-06-16  H.J. Lu  <hongjiu.lu@intel.com>

* elf-bfd.h (ELF_LOCAL_SYMBOL_HASH): New.

* elf32-i386.c (elf_i386_local_hash): Removed.
(elf_i386_local_htab_hash): Use ELF_LOCAL_SYMBOL_HASH.
(elf_i386_get_local_sym_hash): Likewise.

* elf64-x86-64.c (elf64_x86_64_local_hash): Removed.
(elf64_x86_64_local_htab_hash): Use ELF_LOCAL_SYMBOL_HASH.
(elf64_x86_64_get_local_sym_hash): Likewise.
* elfxx-ia64.c (elfNN_ia64_local_htab_hash): Likewise.
(get_local_sym_hash): Likewise.

2009-06-16  H.J. Lu  <hongjiu.lu@intel.com>

* elfxx-ia64.c (elfNN_ia64_link_hash_table): Remove got_sec,
rel_got_sec and plt_sec.
(elfNN_ia64_relax_section): Updated.
(elfNN_ia64_create_dynamic_sections): Likewise.
(get_got): Likewise.
(allocate_dynrel_entries): Likewise.
(elfNN_ia64_size_dynamic_sections): Likewise.
(set_got_entry): Likewise.
(elfNN_ia64_choose_gp): Likewise.
(elfNN_ia64_relocate_section): Likewise.
(elfNN_ia64_finish_dynamic_symbol): Likewise.
(elfNN_ia64_finish_dynamic_sections): Likewise.

* elf32-spu.c (needs_ovl_stub): Respect .brinfo lrlive bits
also for calls.

2009-06-16  H.J. Lu  <hongjiu.lu@intel.com>

* configure.in (elf): Add elf-ifunc.lo.

* configure: Regenerated.
* Makefile.in: Likewise.

* elf-bfd.h (elf_link_hash_table): Add sgot, sgotplt,
srelgot, splt, srelplt, igotplt, iplt, irelplt and irelifunc.

* elf32-i386.c (elf_i386_link_hash_table): Remove sgot,
sgotplt, srelgot, splt, srelplt, igotplt, iplt, irelplt and
irelifunc.
(elf_i386_link_hash_table_create): Likewise.
(elf_i386_create_dynamic_sections): Likewise.
(elf_i386_check_relocs): Likewise.
(elf_i386_allocate_dynrelocs): Likewise.
(elf_i386_size_dynamic_sections): Likewise.
(elf_i386_relocate_section): Likewise.
(elf_i386_finish_dynamic_symbol): Likewise.
(elf_i386_finish_dynamic_sections): Likewise.
(elf_i386_create_got_section): Removed.

* elf64-x86-64.c (elf64_x86_64_link_hash_table): Remove sgot,
sgotplt, srelgot, splt, srelplt, igotplt, iplt, irelplt and
irelifunc.
(elf64_x86_64_compute_jump_table_size): Updated.
(elf64_x86_64_link_hash_table_create): Likewise.
(elf64_x86_64_create_dynamic_sections): Likewise.
(elf64_x86_64_check_relocs): Likewise.
(elf64_x86_64_allocate_dynrelocs): Likewise.
(elf64_x86_64_size_dynamic_sections): Likewise.
(elf64_x86_64_relocate_section): Likewise.
(elf64_x86_64_finish_dynamic_symbol): Likewise.
(elf64_x86_64_finish_dynamic_sections): Likewise.
(elf64_x86_64_create_got_section): Removed.

* elflink.c (_bfd_elf_create_got_section): Use log_file_align
for pointer alignment.  Set up section pointers.
(_bfd_elf_create_dynamic_sections): Likewise.
(_bfd_elf_create_ifunc_sections): Moved to ...
* elf-ifunc.c: Here.  New.

* Makefile.am (BFD32_BACKENDS): Add elf-ifunc.lo.
(BFD32_BACKENDS_CFILES): Add elf-ifunc.c.
Run "make dep-am".

merge from gcc

    PR 10197
        * testsuite/test-demangle.c: Rename getline to get_line to avoid
        conflicts with system function of the same name.

    * corefile.c (cmp_symbol_map): New function.
        (read_function_mappins): Use qsort to sort the symbols.
        (search_mapped_symbol): New function.
        (core_create_function_syms): Use bsearch to find symbols.
        * corefile.h (struct function_map): Add new bit-field: is_first.
        * cg_print.c (cmp_symbol_map): New function.
        (cg_print_file_ordering): Sort the symbol map.

 * elf32-arm.c (cortex_a8_erratum_scan): Change type of offset
   to bfd_signed_vma.  Cast constant operands which are used in
   offset related expressions to bfd_signed_vma type as appropriate.

2009-06-16  Tristan Gingold  <gingold@adacore.com>

* avr-tdep.c (struct gdbarch_tdep): Replace the unused field with
call_length field.
(avr_register_name): Add const to register_names.
(avr_scan_arg_moves): Move inside avr_scan_prologue.
(avr_scan_prologue): Add pc_end argument.
Only read prologue bytes that can be read.
Limit the scan to the known prologue length.
Makes pattern variables static and const.
Fix indentation.
(avr_skip_prologue): Pass func_end argument to avr_scan_prologue.
Fix indentation.
(avr_breakpoint_from_pc): Constify avr_break_insn.
(avr_extract_return_value): Fix function comment.
(avr_frame_unwind_cache): Fix GNU style violations.
Pass current_pc argument to avr_scan_prologue to stop prologue
analysis to the current pc.  This fixes the bug with the 'next'
command.
Correctly set the SP register of the previous frame (use call_length).
(avr_frame_prev_register): Fix indentation.
Correctly read PC from the stack on avr6 architectures.
(avr_push_dummy_call): Fix indentation.
(avr_gdbarch_init): Set call_length according to the architecture.

bfd/
* elf32-vax.c (elf_vax_plt_sym_val): New function.
(elf_backend_plt_sym_val): Define.

opcodes/
* vax-dis.c (is_function_entry): Return success for synthetic
symbols too.
(is_plt_tail): New function.
(print_insn_vax): Decode PLT entry offset longword.

bfd/
* elf32-vax.c (elf_vax_reloc_type_class): New function.
(elf_backend_reloc_type_class): Define.

bfd/
* elf32-vax.c (elf_vax_relocate_section): For symbol references
from an executable to a shared library treat R_VAX_PC32
relocations as R_VAX_PLT32 ones.

bfd/
* elf32-vax.c (elf_vax_instantiate_got_entries): Skip local
symbols in GOT space calculation.
(elf_vax_relocate_section): Adjust accordingly.

bfd/
* elf32-vax.c (elf_vax_plt_entry): Set the entry mask to
include <R11:R2>.

bfd/
* elf32-vax.c (elf_vax_check_relocs): Handle the visibility
attribute.
(elf_vax_relocate_section): Likewise.

gas/
* config/tc-vax.c (md_estimate_size_before_relax): Accept
indirect symbol references in the PIC mode and emit a
PC-relative relocation instead of a GOT/PLT one.  Likewise
for symbols known to be hidden at this point.

daily update

*** empty log message ***

2009-06-15  H.J. Lu  <hongjiu.lu@intel.com>

* elf32-i386.c (elf_i386_allocate_dynrelocs): Update comments.
* elf64-x86-64.c (elf64_x86_64_allocate_dynrelocs): Likewise.

2009-06-15  H.J. Lu  <hongjiu.lu@intel.com>

* elf32-i386.c (elf_i386_check_relocs): Reformat.
* elf64-x86-64.c (elf64_x86_64_check_relocs): Likewise.

    PR 10186
        * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
        instruction.

        * gas/arm/thumb32.d: Fix expected binary value of SEV.W instruction.

        * config/tc-arm.c (T16_32_TAB): Fix binary value of SEV.W
        instruction.

    PR 10173
        * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice.

2009-06-15  H.J. Lu  <hongjiu.lu@intel.com>

* Makefile.am: Run "make dep-am".
* Makefile.in: Regenerated.

    * configure.ac: Define is_elf for QNX Neutrino targets.
        * configure: Regenerate.

2009-06-15  H.J. Lu  <hongjiu.lu@intel.com>

* ld-ifunc/ifunc-9-x86.d: Fix a typo.

2009-06-15  H.J. Lu  <hongjiu.lu@intel.com>

* elf32-i386.c (elf_i386_allocate_dynrelocs): Fix a typo.
* elf64-x86-64.c (elf64_x86_64_allocate_dynrelocs): Likewise.

2009-06-15  Phil Muldoon  <pmuldoon@redhat.com>

* infcall.c (show_unwind_on_terminating_exception_p): New
function.
(call_function_by_hand): Create breakpoint and clean-up call for
std::terminate.breakpoint. Add unwind_on_terminating_exception_p
gate. Pop frame on breakpoint hit.
(_initialize_infcall): Add add_setshow_boolean_cmd for
unwind-on-terminating-exception.

testsuite/

2009-06-15  Phil Muldoon  <pmuldoon@redhat.com>

* gdb.cp/gdb2495.cc: New file.
* gdb.cp/gdb2495.exp: New file.

doc/

2009-06-15  Phil Muldoon  <pmuldoon@redhat.com>

* doc/gdb.texinfo (Calling): Document
set-unwind-on-terminating-exception usage.

    PR 10263
        * arm-dis.c (print_insn): Ignore is_data if the user has requested
        the disassembly of data as well as instructions.

        * objdump.c (disassemble_bytes): Set the DISASSEMBLE_DATA bit in
        the flags field of the disassemble_info structure if the -D switch
        is in operation.

        * dis-asm.h (struct disassemble_info): New value for the flags
        field.

    * po/ru.po: New Russian translation.
        * configure.in (ALL_LINGUAS): Add ru.
        * configure: Regenerate.

    * corefile.c (core_create_syms_from): Use BFD_VMA_FMT when
        scanning in an address.

2009-06-14  H.J. Lu  <hongjiu.lu@intel.com>

* elf32-i386.c: Remove duplicated comments.

*** empty log message ***

daily update

bfd/

2009-06-14  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/10270
* elf32-i386.c (elf_i386_allocate_dynrelocs): Disallow
dynamic IFUNC pointer in non-shared object.  Use .got.plt
for IFUNC definition in PIE.
(elf_i386_allocate_dynrelocs): Resolve IFUNC definition in
PIE locally.

* elf64-x86-64.c (elf64_x86_64_allocate_dynrelocs): Disallow
dynamic IFUNC pointer in non-shared object.  Use .got.plt
for IFUNC definition in PIE.
(elf64_x86_64_relocate_section): Resolve IFUNC definition in
PIE locally.

ld/testsuite/

2009-06-14  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/10270
* ld-ifunc/ifunc-9-x86.d: New.
* ld-ifunc/ifunc-9-x86.s: Likewise.

* cgen.sh: Handle multiple simultaneous runs for parallel makes.

2009-06-13  H.J. Lu  <hongjiu.lu@intel.com>

* elf32-i386.c (elf_i386_relocate_section): Properly report
local symbol for unhandled relocation against STT_GNU_IFUNC
symbol.
* elf64-x86-64.c (elf64_x86_64_relocate_section): Likewise.

2009-06-13  H.J. Lu  <hongjiu.lu@intel.com>

* elf32-i386.c (elf_i386_check_relocs): Properly report
local symbol for unhandled relocation against STT_GNU_IFUNC
symbol.
* elf64-x86-64.c (elf64_x86_64_check_relocs):  Likewise.

bfd/

2009-06-13  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/10269
* elf32-i386.c: Include "objalloc.h" and "hashtab.h".
(elf_i386_link_hash_table): Add loc_hash_table and
loc_hash_memory.
(elf_i386_local_hash): New.
(elf_i386_local_htab_hash): Likewise.
(elf_i386_local_htab_eq): Likewise.
(elf_i386_get_local_sym_hash): Likewise.
(elf_i386_link_hash_table_free): Likewise.
(elf_i386_allocate_local_dynrelocs): Likewise.
(elf_i386_finish_local_dynamic_symbol): Likewise.
(bfd_elf64_bfd_link_hash_table_free): Likewise.
(elf_i386_link_hash_table_create): Create loc_hash_table and
loc_hash_memory.
(elf_i386_check_relocs): Handle local STT_GNU_IFUNC symbols.
(elf_i386_size_dynamic_sections): Likewise.
(elf_i386_relocate_section): Likewise.
(elf_i386_finish_dynamic_sections): Likewise.
(elf_i386_finish_dynamic_symbol): Check _DYNAMIC only if sym
isn't NULL.

* elf64-x86-64.c: Include "objalloc.h" and "hashtab.h".
(elf64_x86_64_link_hash_table): Add loc_hash_table and
loc_hash_memory.
(elf64_x86_64_local_hash): New.
(elf64_x86_64_local_htab_hash): Likewise.
(elf64_x86_64_local_htab_eq): Likewise.
(elf64_x86_64_get_local_sym_hash): Likewise.
(elf64_x86_64_link_hash_table_free): Likewise.
(elf64_x86_64_allocate_local_dynrelocs): Likewise.
(elf64_x86_64_finish_local_dynamic_symbol): Likewise.
(bfd_elf64_bfd_link_hash_table_free): Likewise.
(elf64_x86_64_link_hash_table_create): Create loc_hash_table
and loc_hash_memory.
(elf64_x86_64_check_relocs): Handle local STT_GNU_IFUNC
symbols.
(elf64_x86_64_size_dynamic_sections): Likewise.
(elf64_x86_64_relocate_section): Likewise.
(elf64_x86_64_finish_dynamic_sections): Likewise.
(elf64_x86_64_finish_dynamic_symbol): Check _DYNAMIC only if
sym isn't NULL.

gas/

2009-06-13  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/10269
* config/tc-i386.c (md_apply_fix): Use TC_FORCE_RELOCATION
instead of generic_force_reloc.

* config/tc-i386.h (TC_FORCE_RELOCATION): New.

ld/testsuite/

2009-06-13  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/10269
*: ld-ifunc/ifunc-1-local-x86.d: New.
*: ld-ifunc/ifunc-1-local-x86.s: Likewise.
*: ld-ifunc/ifunc-2-local-i386.d: Likewise.
*: ld-ifunc/ifunc-2-local-i386.s: Likewise.
*: ld-ifunc/ifunc-2-local-x86-64.d: Likewise.
*: ld-ifunc/ifunc-2-local-x86-64.s: Likewise.
*: ld-ifunc/ifunc-4-local-x86.d: Likewise.
*: ld-ifunc/ifunc-4-local-x86.s: Likewise.
*: ld-ifunc/ifunc-5-local-i386.s: Likewise.
*: ld-ifunc/ifunc-5-local-x86-64.s: Likewise.
*: ld-ifunc/ifunc-5a-local-i386.d: Likewise.
*: ld-ifunc/ifunc-5a-local-x86-64.d: Likewise.
*: ld-ifunc/ifunc-5b-local-i386.d: Likewise.
*: ld-ifunc/ifunc-5b-local-x86-64.d: Likewise.

*** empty log message ***

daily update

* dwarf2read.c (dwarf2_psymtab_to_symtab): Propagate
`has_section_at_zero' flag from stripped objfile to separate,
debug info only, objfile.

*** empty log message ***

daily update

gdb/testsuite/
Report error on GDB crash during runto.
* lib/gdb.exp (runto <eof>): New.

* exec.h (section_table_xfer_memory_partial): Improve description,
mention SECTION_NAME.
* exec.c (section_table_xfer_memory_partial): Remove stale
description.

    * corefile.c (num_of_syms_in): New function - computes the number
        of symbols in a given file.
        (core_create_syms_from): New function - populates a symbol table
        from the symbols found in a specified file.
        * corefile.h: Prototype core_create_syms_from.
        * gprof.c (long_options): Add --external-symbol-table.
        (usage): Mention it.
        (main): Initiailize external_symbol_table from
        --external-symbol-table option.  If set use it.
        * gprof.texi: Document the new option.

        * NEWS: Mention new feature added to gprof.

2009-06-10  Philip Blundell  <philb@gnu.org>

* emultempl/armelf.em (gld${EMULATION_NAME}_finish): Avoid crash
if section has no ELF data.

2009-06-10  Philip Blundell  <philb@gnu.org>

* elf32-arm.c (elf32_arm_fix_exidx_coverage): Avoid crash if
elf_sec->this_hdr == NULL.

    * readelf.c (process_symbol_table): Set gnubuckets to NULL after
        freeing it and before returning.

* opncls.c (_maybe_make_executable): New function.  Gives execute
        permission to an executable bfd that was opened for writing
        provided that it is a regular file.  Replaces common code found in...
        (bfd_close): here and ...
        (bfd_close_all_done): here.

* readelf.c (process_symbol_table): Don't return early if
.hash/.gnu.hash is empty/unusable and not -D.

2009-06-12  Tristan Gingold  <gingold@adacore.com>

* reloc.c: Add BFD_RELOC_MACH_O_SECTDIFF and BFD_RELOC_MACH_O_PAIR.
* bfd-in2.h: Regenerated.
* libbfd.h: Regenerated.

* mach-o.c (FILE_ALIGN): New macro.
(bfd_mach_o_canonicalize_symtab): Adjust for bfd_mach_o_asymbol.
(bfd_mach_o_print_symbol): Ditto.
(bfd_mach_o_scan_write_thread): Adjust type of variable offset.
(bfd_mach_o_get_reloc_upper_bound): New function.
(bfd_mach_o_canonicalize_reloc): Ditto.
(bfd_mach_o_scan_write_relocs): Ditto.
(bfd_mach_o_scan_write_section_32): Remove offset argument.
(bfd_mach_o_scan_write_section_64): Ditto.
(bfd_mach_o_scan_write_segment_32): Write relocs.  Fix size of data
written for load command.  Do not compute section file offset.
(bfd_mach_o_scan_write_segment_64): Ditto.
(bfd_mach_o_scan_write_symtab): Compute file offset first.
Adjust for bfd_mach_o_asymbol.  Move code to convert from BFD to
Mach-O to ...
(bfd_mach_o_mangle_symbols): ... this new function.
(bfd_mach_o_write_contents): Be sure to habe load commands built.
Call bfd_mach_o_mangle_symbols.
(bfd_mach_o_build_commands): Adjust for filelen field.
Use FILE_ALIGN macro.  Clear section file offset if section is empty.
Do not set symtab file offset anymore here.
(bfd_mach_o_make_empty_symbol): Allocate a bfd_mach_o_asymbol.
(bfd_mach_o_make_bfd_section): Set SEC_RELOC if has reloc.
Set reloc_count and rel_filepos section fields.
(bfd_mach_o_scan_read_section_32): Type of argument offset is now
unsigned int.
(bfd_mach_o_scan_read_section_64): Ditto.
(bfd_mach_o_scan_read_section): Ditto.
(bfd_mach_o_scan_read_symtab_symbol): Typr of argument s is now
bfd_mach_o_asymbol.  Use unsigned int for file offset type.
(bfd_mach_o_scan_read_symtab_symbol): Adjust for bfd_mach_o_asymbol.
Handle weak-ref symbols.
(bfd_mach_o_scan_read_symtab_symbols): Adjust for bfd_mach_o_asymbol.
(bfd_mach_o_scan_read_dysymtab_symbol): Ditto.
(bfd_mach_o_scan): Remove assignment to removed field.
(bfd_mach_o_mkobject_init): Ditto.
(bfd_mach_o_bfd_print_private_bfd_data): Adjust printf formatter.
(bfd_mach_o_bfd_reloc_type_lookup): New macro.
(bfd_mach_o_bfd_reloc_name_lookup): Ditto.
(bfd_mach_o_swap_reloc_in): Ditto.
(bfd_mach_o_swap_reloc_out): Ditto.

* mach-o.h (BFD_MACH_O_REFERENCE_FLAG_UNDEFINED_NON_LAZY)
(BFD_MACH_O_REFERENCE_FLAG_UNDEFINED_LAZY)
(BFD_MACH_O_REFERENCE_FLAG_DEFINED)
(BFD_MACH_O_REFERENCE_FLAG_PRIVATE_DEFINED)
(BFD_MACH_O_REFERENCE_FLAG_PRIVATE_UNDEFINED_NON_LAZY)
(BFD_MACH_O_REFERENCE_FLAG_PRIVATE_UNDEFINED_LAZY)
(BFD_MACH_O_REFERENCED_DYNAMICALLY, BFD_MACH_O_N_DESC_DISCARDED)
(BFD_MACH_O_N_NO_DEAD_STRIP, BFD_MACH_O_N_WEAK_REF)
(BFD_MACH_O_N_WEAK_DEF): New macros.
Add comments.
(bfd_mach_o_section_type): Add new enumeration values.
(BFD_MACH_O_S_SELF_MODIFYING_CODE)
(BFD_MACH_O_S_ATTR_LIVE_SUPPORT)
(BFD_MACH_O_S_ATTR_NO_DEAD_STRIP)
(BFD_MACH_O_S_ATTR_STRIP_STATIC_SYMS, BFD_MACH_O_S_ATTR_NO_TOC): New
macros.
(BFD_MACH_O_GENERIC_RELOC_VANILLA)
(BFD_MACH_O_GENERIC_RELOC_PAIR)
(BFD_MACH_O_GENERIC_RELOC_SECTDIFF)
(BFD_MACH_O_GENERIC_RELOC_PB_LA_PTR)
(BFD_MACH_O_GENERIC_RELOC_LOCAL_SECTDIFF): Ditto.
(BFD_MACH_O_RELENT_SIZE): Ditto.
(BFD_MACH_O_R_PCREL, BFD_MACH_O_GET_R_LENGTH)
(BFD_MACH_O_R_EXTERN, BFD_MACH_O_GET_R_TYPE)
(BFD_MACH_O_GET_R_SYMBOLNUM, BFD_MACH_O_SET_R_LENGTH)
(BFD_MACH_O_SET_R_TYPE, BFD_MACH_O_SET_R_SYMBOLNUM): Ditto.
(BFD_MACH_O_SR_SCATTERED, BFD_MACH_O_SR_PCREL)
(BFD_MACH_O_GET_SR_LENGTH, BFD_MACH_O_GET_SR_TYPE)
(BFD_MACH_O_GET_SR_ADDRESS, BFD_MACH_O_SET_SR_LENGTH)
(BFD_MACH_O_SET_SR_TYPE, BFD_MACH_O_SET_SR_ADDRESS): Ditto.
(bfd_mach_o_reloc_info): New struct.
(bfd_mach_o_asymbol): New struct.
(bfd_mach_o_symtab_command): The symbols field is now of type
bfd_mach_o_asymbol.
(bfd_mach_o_load_command): The offset and len fields are now of type
unsigned int.
(mach_o_data_struct): Remove symbols, nsymbols and ibfd fields.
Add a filelen field.  Add comments.
(bfd_mach_o_backend_data): New struct.
(bfd_mach_o_get_backend_data): New macro.
(bfd_mach_o_scan_read_symtab_symbol): Parameter symbol now of type
bfd_mach_o_asymbol.
(bfd_mach_o_scan_read_dysymtab_symbol): Ditto.
(bfd_mach_o_get_reloc_upper_bound): New prototype.
(bfd_mach_o_canonicalize_reloc): Ditto.

* mach-o-target.c (bfd_mach_o_bfd_is_local_label_name): Remove
duplicated macro.  Now defined to _bfd_generic_is_local_label.
(TARGET_NAME_BACKEND): New macro...
(TARGET_NAME_BACKEND): ... used to name a new variable.
(TARGET_NAME): Define relocs table using bfd_mach_o, reference
Mach-O backend data.

* mach-o-i386.c (i386_howto_table): New variable.
(bfd_mach_o_i386_swap_reloc_in): New function.
(bfd_mach_o_i386_swap_reloc_out): Ditto.
(bfd_mach_o_i386_bfd_reloc_type_lookup): Ditto.
(bfd_mach_o_i386_bfd_reloc_name_lookup): Ditto.
(bfd_mach_o_swap_reloc_in, bfd_mach_o_swap_reloc_out): New macros.
(bfd_mach_o_bfd_reloc_type_lookup)
(bfd_mach_o_bfd_reloc_name_lookup): Ditto.

* nto-tdep.h (nto_generic_supply_gpregset)
(nto_generic_supply_fpregset, nto_generic_supply_altregset): Remove.
* nto-tdep.c (nto_generic_supply_gpregset)
(nto_generic_supply_fpregset, nto_generic_supply_altregset): Remove.

*** empty log message ***

daily update

* i386-nto-tdep.c (I386_NTO_SIGCONTEXT_OFFSET): Remove define.
(i386nto_sigcontext_addr): Change the way context address is calculated.
(i386nto_init_abi): Remove usage of deprecated sc_reg_offset and
sc_sp_offset and set sc_reg_offset and sc_num_regs.

* i386-nto-tdep.c (i386_nto_target): Remove definition.
(init_i386nto_ops): Use macros to set fields to global
current_nto_target directly.
(i386nto_init_abi): Remove unused nto_set_target call.
* nto-tdep.h (nto_set_target): Remove unused declaration.
* nto-tdep.c (nto_set_target): Remove unused function.

* breakpoint.c (break_command_really): Rename local variable
breakpoint_chain to bkpt_chain.

Add support for XMM registers.
* i386-nto-tdep.c (i386nto_regset_id): Add case for SSE register set.
(i386nto_register_area): Correctly calculate offsets and sizes for
all supported registers.

* eval.c (evaluate_subexp_standard) <OP_OBJC_MSGCALL>: Remove
'static' from local variable definitions.

* symtab.c (append_expanded_sal): Remove unused local variables.

gdb/
* infrun.c (sched_multi): New global.
(resume): If sched_multi is set, resume only threads of the
current inferior.
(prepare_to_proceed): Don't switch over to wait_ptid if we're
resuming a different inferior, and sched_multi is off.
(show_schedule_multiple): New.
(_initialize_infrun): Register new "set schedule-multiple" command.
* inferior.h (sched_multi): Declare.
* NEWS: Mention new "schedule-multiple" setting.
gdb/doc/
* gdb.texinfo (All-Stop): Document new 'set schedule-multiple'
command.

Add PC-relative branch support to moxie sim.

Add PC-relative branch instructions to moxie port.

Typos in ChangeLog :-(

2009-06-10  Paul Pluzhnikov  <ppluzhnikov@google.com>

* bfd-in2.h: bfd_mmap prototype
* bfdio.c (bfd_mmap): New function.
* libbfd.h (bfd_iovec): Add bmmap.
* cache.c (cache_bmap): New function.
(cache_iovec): Initialize bmmap member.
* opencls.c (opncls_bmmap): New function.
(opncls_iovec): Initialize bmmap member.

*** empty log message ***

daily update

* varobj.c (varobj_create): Properly restore the selected frame.

* inferior.c (print_inferior): Make a table, not a list.  Emit
table headers.

2009-06-10  Jonas Maebe  <jonas.maebe@elis.ugent.be>

* darwin-nat.c (darwin_stop_inferior): Pass 0 as options to
darwin_wait (blocking wait).
(darwin_kill_inferior): Likewise.

* infrun.c (handle_inferior_event): Update comment around trying
to revert back to a stepping thread that has exited.

* dwarf2read.c (dwarf_decode_lines): Recognize and ignore
DW_LNE_set_discriminator.

Handle MOXIE_F1_M opcodes.

* breakpoint.c: ARI fixes.
(create_overlay_event_breakpoint): Avoid assignment inside if statement.
(print_one_breakpoint_location): Likewise.
(create_longjmp_breakpoint): Likewise.
(tracepoint_save_command): Likewise
(bpstat_find_step_resume_breakpoint): No operator at end of line.
(bpstat_stop_status): Likewise.
(describe_other_breakpoints): Likewise.
(hw_watchpoint_used_count): Likewise.
(expand_line_sal_maybe): Likewise.
(break_command_really): Likewise.
(delete_command): Likewise.
(do_enable_breakpoint): Likewise.
(delete_trace_command): Likewise.
(catch_exception_command_1): Likewise and remove extra parentheses.

*** empty log message ***

daily update

* gdb.mi/mi-async.exp, gdb.mi/mi-basics.exp,
gdb.mi/mi-break.exp, gdb.mi/mi-cli.exp,
gdb.mi/mi-disassemble.exp, gdb.mi/mi-eval.exp,
gdb.mi/mi-file-transfer.exp, gdb.mi/mi-file.exp,
gdb.mi/mi-regs.exp, gdb.mi/mi-return.exp,
gdb.mi/mi-simplerun.exp, gdb.mi/mi-stepi.exp,
gdb.mi/mi-var-block.exp, gdb.mi/mi-var-cmd.exp,
gdb.mi/mi-var-display.exp, gdb.mi/mi-var-invalidate.exp,
gdb.mi/mi-watch.exp, gdb.mi/mi2-basics.exp,
gdb.mi/mi2-break.exp, gdb.mi/mi2-cli.exp,
gdb.mi/mi2-disassemble.exp, gdb.mi/mi2-eval.exp,
gdb.mi/mi2-file.exp, gdb.mi/mi2-regs.exp,
gdb.mi/mi2-return.exp, gdb.mi/mi2-simplerun.exp,
gdb.mi/mi2-stepi.exp, gdb.mi/mi2-var-block.exp,
gdb.mi/mi2-var-child.exp, gdb.mi/mi2-var-cmd.exp,
gdb.mi/mi2-var-display.exp, gdb.mi/mi2-watch.exp,
gdb.server/ext-run.exp, gdb.server/file-transfer.exp,
gdb.server/server-mon.exp, gdb.server/server-run.exp,
gdb.trace/actions.exp, gdb.trace/backtrace.exp,
gdb.trace/deltrace.exp, gdb.trace/infotrace.exp,
gdb.trace/packetlen.exp, gdb.trace/passc-dyn.exp,
gdb.trace/passcount.exp, gdb.trace/report.exp,
gdb.trace/save-trace.exp, gdb.trace/tfind.exp,
gdb.trace/tracecmd.exp, gdb.trace/while-dyn.exp,
gdb.trace/while-stepping.exp: Use a unique name for the compiled
executable.