Steven G. Kargl [Sun, 15 Sep 2019 17:49:44 +0000 (17:49 +0000)]
re PR fortran/91727 (ICE in conformable_arrays, at fortran/resolve.c:7490)
2019-09-15 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91727
* resolve.c (conformable_arrays): If array-spec is NULL, then
allocate-object is a scalar. a conformability check only occurs
for an array source-expr.
2019-09-15 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91727
* gfortran.dg/pr91727.f90: New test.
From-SVN: r275731
Jason Merrill [Sun, 15 Sep 2019 17:29:24 +0000 (13:29 -0400)]
Change C++ to C comments.
From-SVN: r275730
Thomas Koenig [Sun, 15 Sep 2019 14:57:48 +0000 (14:57 +0000)]
re PR fortran/91550 (ICE in do_subscript, at fortran/frontend-passes.c:2652)
2019-09-15 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/91550
* frontend-passes.c (do_subscript): If step equals
zero, a previuos error has been reported; do nothing
in this case.
* resolve.c (gfc_resolve_iterator): Move error checking
after type conversion.
2019-09-15 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/91550
* gfortran.dg/do_subscript_6.f90: New test.
From-SVN: r275729
Nathan Sidwell [Sun, 15 Sep 2019 12:24:14 +0000 (12:24 +0000)]
[C++ PATCH] simplify clone predicate
https://gcc.gnu.org/ml/gcc-patches/2019-09/msg00904.html
* cp-tree.h (DECL_CLONED_FUNCTION_P): Reimplement using
IDENTIFIER_CDTOR_P, correct documentation.
(DECL_CLONED_FUNCTION): Directly access field.
(decl_cloned_function_p): Delete.
* class.c (decl_cloned_function_p): Delete.
* pt.c (instantiate_template_1): Check DECL_CHAIN is a decl.
From-SVN: r275727
Thomas Koenig [Sun, 15 Sep 2019 08:43:42 +0000 (08:43 +0000)]
re PR fortran/91556 (Problems with better interface checking)
2019-09-15 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/91556
* gfortran.dg/warn_argument_mismatch_1.f90: Remove.
From-SVN: r275726
GCC Administrator [Sun, 15 Sep 2019 00:16:23 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r275723
Thomas Koenig [Sat, 14 Sep 2019 20:40:55 +0000 (20:40 +0000)]
re PR fortran/91557 (Bogus warning about unused dummy argument _formal_*)
2019-09-14 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/91557
PR fortran/91556
* frontend-passes.c (check_externals_procedure): Reformat argument
list. Use gfc_compare_actual_formal instead of gfc_procedure_use.
* gfortran.h (gfc_symbol): Add flag error.
* interface.c (gfc_compare_interfaces): Reformat.
(argument_rank_mismatch): Add where_formal argument. If it is
present, note that the error is between different calls.
(compare_parameter): Change warnings that previously dependended
on -Wargument-mismatch to unconditional. Issue an error / warning
on type mismatch only once. Pass where_formal to
argument_rank_mismatch for artificial variables.
(compare_actual_formal): Change warnings that previously
dependeded on -Wargument-mismatch to unconditional.
(gfc_check_typebound_override): Likewise.
(gfc_get_formal_from_actual_arglist): Set declared_at for
artificial symbol.
* invoke.texi: Extend description of -fallow-argument-mismatch.
Delete -Wargument-mismatch.
* lang.opt: Change -Wargument-mismatch to do-nothing option.
* resolve.c (resolve_structure_cons): Change warnings that
previously depended on -Wargument-mismatch to unconditional.
* trans-decl.c (generate_local_decl): Do not warn if the symbol is
artificial.
2019-09-14 Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/91557
PR fortran/91556
* gfortran.dg/argument_checking_20.f90: New test.
* gfortran.dg/argument_checking_21.f90: New test.
* gfortran.dg/argument_checking_22.f90: New test.
* gfortran.dg/argument_checking_23.f90: New test.
* gfortran.dg/warn_unused_dummy_argument_5.f90: New test.
* gfortran.dg/bessel_3.f90: Add pattern for type mismatch.
* gfortran.dg/g77/
20010519-1.f: Adjust dg-warning messages to new
handling.
* gfortran.dg/pr24823.f: Likewise.
* gfortran.dg/pr39937.f: Likewise.
From-SVN: r275719
Sandra Loosemore [Sat, 14 Sep 2019 19:00:15 +0000 (15:00 -0400)]
re PR middle-end/83889 (new failures on some arm targets after r256644)
2019-09-14 Sandra Loosemore <sandra@codesourcery.com>
PR testsuite/83889
gcc/testsuite/
* g++.dg/vect/pr87914.cc: Remove explicit dg-do run.
From-SVN: r275718
Jason Merrill [Sat, 14 Sep 2019 18:45:46 +0000 (14:45 -0400)]
Formatting and comment syntax adjustments.
From-SVN: r275717
Kewen Lin [Sat, 14 Sep 2019 09:01:21 +0000 (09:01 +0000)]
Consider doloop IV in IVOPTs
For the targets supporting low-overhead loops, IVOPTs has to take care of
the loops which will probably be transformed in RTL doloop optimization,
to try to make selected IV candidate set optimal. The process of doloop
support includes:
1) Analyze the current loop will be transformed to doloop or not, find and
mark its compare type IV use as doloop use (iv_group field doloop_p), and
set flag doloop_use_p of ivopts_data to notify subsequent processings on
doloop. See analyze_and_mark_doloop_use and its callees for the details.
The target hook predict_doloop_p can be used for target specific checks.
2) Add one doloop dedicated IV cand {(may_be_zero ? 1 : (niter + 1)), +, -1},
set flag doloop_p of iv_cand, step cost is set as zero and no extra cost
like biv. For cost determination between doloop IV cand and IV use, the
target hooks doloop_cost_for_generic and doloop_cost_for_address are
provided to add on extra costs for generic type and address type IV use.
Zero cost is assigned to the pair between doloop IV cand and doloop IV
use, and bound zero is set for IV elimination.
3) With the cost setting in step 2), the current cost model based IV
selection algorithm will process as usual, pick up doloop dedicated IV if
profitable.
gcc/ChangeLog
2019-09-14 Kewen Lin <linkw@gcc.gnu.org>
PR middle-end/80791
* config/rs6000/rs6000.c (TARGET_HAVE_COUNT_REG_DECR_P): New macro.
(TARGET_DOLOOP_COST_FOR_GENERIC): Likewise.
(TARGET_DOLOOP_COST_FOR_ADDRESS): Likewise.
* target.def (have_count_reg_decr_p): New hook.
(doloop_cost_for_generic): Likewise.
(doloop_cost_for_address): Likewise.
* doc/tm.texi.in (TARGET_HAVE_COUNT_REG_DECR_P): Likewise.
(TARGET_DOLOOP_COST_FOR_GENERIC): Likewise.
(TARGET_DOLOOP_COST_FOR_ADDRESS): Likewise.
* doc/tm.texi: Regenerate.
* tree-ssa-loop-ivopts.c (comp_cost::operator+=): Consider infinite cost
addend.
(record_group): Init doloop_p.
(add_candidate_1): Add optional argument doloop, change the handlings
accordingly.
(add_candidate): Likewise.
(generic_predict_doloop_p): Update attribute.
(force_expr_to_var_cost): Add costing for expressions COND_EXPR/LT_EXPR/
LE_EXPR/GT_EXPR/GE_EXPR/EQ_EXPR/NE_EXPR/UNORDERED_EXPR/ORDERED_EXPR/
UNLT_EXPR/UNLE_EXPR/UNGT_EXPR/UNGE_EXPR/UNEQ_EXPR/LTGT_EXPR/MAX_EXPR/
MIN_EXPR.
(get_computation_cost): Update for doloop IV cand extra cost.
(determine_group_iv_cost_cond): Update for doloop IV cand.
(determine_iv_cost): Likewise.
(ivopts_estimate_reg_pressure): Likewise.
(may_eliminate_iv): Update handlings for doloop IV cand.
(add_iv_candidate_for_doloop): New function.
(find_iv_candidates): Call function add_iv_candidate_for_doloop.
(iv_ca_set_no_cp): Update for doloop IV cand.
(iv_ca_set_cp): Likewise.
(iv_ca_dump): Dump register cost.
(find_doloop_use): New function.
(analyze_and_mark_doloop_use): Likewise.
(tree_ssa_iv_optimize_loop): Call function analyze_and_mark_doloop_use.
gcc/testsuite/ChangeLog
2019-09-14 Kewen Lin <linkw@gcc.gnu.org>
PR middle-end/80791
* gcc.dg/tree-ssa/ivopts-3.c: Adjust for doloop change.
* gcc.dg/tree-ssa/ivopts-lt.c: Likewise.
* gcc.dg/tree-ssa/pr32044.c: Likewise.
From-SVN: r275713
GCC Administrator [Sat, 14 Sep 2019 00:16:25 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r275709
Steven G. Kargl [Fri, 13 Sep 2019 20:19:40 +0000 (20:19 +0000)]
re PR fortran/91566 (ICE in gfc_constructor_copy, at fortran/constructor.c:103)
2019-09-13 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91566
* simplify.c (gfc_simplify_merge): Need to simplify expression
after insertation of parenthesis.
2019-09-13 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91566
* gfortran.dg/pr91566.f90:
From-SVN: r275704
Tobias Burnus [Fri, 13 Sep 2019 18:14:02 +0000 (18:14 +0000)]
libgomp plugin - init string
libgomp/
2019-09-13 Tobias Burnus <tobias@codesourcery.com>
* plugin/plugin-hsa.c (hsa_warn, hsa_fatal, hsa_error): Ensure
string is initialized.
From-SVN: r275703
Maciej W. Rozycki [Fri, 13 Sep 2019 17:43:12 +0000 (17:43 +0000)]
gnatmake: Accept the `--sysroot=' GCC driver option
According to `gnatmake' documentation:
"Any uppercase or multi-character switch that is not a 'gnatmake' switch
is passed to 'gcc' (e.g., '-O', '-gnato,' etc.)"
however the `--sysroot=' switch is actually rejected:
gnatmake: invalid switch: --sysroot=...
likely because it is one of the very few GCC driver options that have a
leading double dash and therefore we don't have a blanket fall-through
for such switches that would satisfy what our documentation claims.
The option is actually shared between the compiler and the linker, so
pass the switch to both build stages if requested, removing GNAT
testsuite issues like:
gnatmake: invalid switch: --sysroot=.../sysroot
compiler exited with status 1
Executing on host: .../gcc/gnatclean -c -q -n ./abstract_with_anonymous_result (timeout = 300)
spawn -ignore SIGHUP .../gcc/gnatclean -c -q -n ./abstract_with_anonymous_result
PASS: gnat.dg/abstract_with_anonymous_result.adb (test for excess errors)
UNRESOLVED: gnat.dg/abstract_with_anonymous_result.adb compilation failed to produce executable
in a test environment where `--with-build-sysroot=.../sysroot' has been
used to build a cross-compiler. Passing to the compilation stage only
would lead to errors like:
.../bin/riscv64-linux-gnu-ld: cannot find crt1.o: No such file or directory
.../bin/riscv64-linux-gnu-ld: cannot find -lc
collect2: error: ld returned 1 exit status
gnatlink: error when calling .../gcc/xgcc
gnatmake: *** link failed.
compiler exited with status 1
Executing on host: .../gcc/gnatclean -c -q -n ./abstract_with_anonymous_result (timeout = 300)
spawn -ignore SIGHUP .../gcc/gnatclean -c -q -n ./abstract_with_anonymous_result
./abstract_with_anonymous_result.ali
./abstract_with_anonymous_result.o
FAIL: gnat.dg/abstract_with_anonymous_result.adb (test for excess errors)
Excess errors:
.../bin/riscv64-linux-gnu-ld: cannot find crt1.o: No such file or directory
.../bin/riscv64-linux-gnu-ld: cannot find -lc
gnatlink: error when calling .../gcc/xgcc
UNRESOLVED: gnat.dg/abstract_with_anonymous_result.adb compilation failed to produce executable
instead.
gcc/ada/
* make.adb (Scan_Make_Arg): Also accept `--sysroot=' for the
compiler and the linker.
From-SVN: r275702
Bernd Edlinger [Fri, 13 Sep 2019 17:22:04 +0000 (17:22 +0000)]
re PR middle-end/91708 ([ARM] Bootstrap fails in gen_movsi, at config/arm/arm.md:5258)
2019-09-13 Bernd Edlinger <bernd.edlinger@hotmail.de>
PR middle-end/91708
* cse.c (cse_insn): Do not replace anything with a
MEM.
From-SVN: r275701
Ian Lance Taylor [Fri, 13 Sep 2019 17:07:20 +0000 (17:07 +0000)]
libgo: don't use \? in grep pattern
It's not supported by Solaris grep. Just use * instead; it matches
more but it shouldn't matter.
Fixes https://gcc.gnu.org/PR91764
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/195238
From-SVN: r275700
Ian Lance Taylor [Fri, 13 Sep 2019 13:45:35 +0000 (13:45 +0000)]
* doc/invoke.texi (Optimize Options): Fix typo.
From-SVN: r275699
Bernd Edlinger [Fri, 13 Sep 2019 11:33:18 +0000 (11:33 +0000)]
re PR fortran/91716 (ICE in output_constant, at varasm.c:5026)
2019-09-13 Bernd Edlinger <bernd.edlinger@hotmail.de>
PR fortran/91716
* trans-array.c (gfc_conv_array_initializer): Always assign the
array type of the field to the string constant.
testsuite:
2019-09-13 Bernd Edlinger <bernd.edlinger@hotmail.de>
PR fortran/91716
* gfortran.dg/pr91716.f90: New test.
From-SVN: r275698
Sam Tebbs [Fri, 13 Sep 2019 10:41:37 +0000 (10:41 +0000)]
[PATCH][GCC] Update my email address
gcc/ChangeLog
2019-09-13 Sam Tebbs <sam.tebbs@arm.com>
* MAINTAINERS (Sam Tebbs): Update email address.
From-SVN: r275697
Paul Thomas [Fri, 13 Sep 2019 05:41:01 +0000 (05:41 +0000)]
re PR fortran/91717 (ICE on concatenating deferred-length character and character literal)
2019-09-13 Paul Thomas <pault@gcc.gnu.org>
PR fortran/91717
* dependency.c (gfc_dep_resolver): Flag identical components
and exit with return value 1 if set and no array refs.
2019-09-13 Paul Thomas <pault@gcc.gnu.org>
PR fortran/91717
* gfortran.dg/dependency_55.f90 : New test.
From-SVN: r275696
GCC Administrator [Fri, 13 Sep 2019 00:16:19 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r275695
Ian Lance Taylor [Thu, 12 Sep 2019 23:22:53 +0000 (23:22 +0000)]
libgo: update to Go1.13
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/194698
From-SVN: r275691
Uros Bizjak [Thu, 12 Sep 2019 19:18:25 +0000 (21:18 +0200)]
re PR tree-optimization/89386 (Generation of vectorized MULHRS (Multiply High with Round and Scale) instruction)
PR tree-optimization/89386
* config/i386/sse.md (smulhrs<mode>3): New expander.
(smulhrsv4hi3): Ditto.
testsuite/ChangeLog:
PR tree-optimization/89386
* gcc.target/i386/pr89386.c: New test.
* gcc.target/i386/pr89386-1.c: Ditto.
From-SVN: r275689
Richard Biener [Thu, 12 Sep 2019 12:48:43 +0000 (12:48 +0000)]
re PR tree-optimization/91750 (Induction vectorization introduces signed overflows)
2019-09-12 Richard Biener <rguenther@suse.de>
PR tree-optimization/91750
* tree-vect-loop.c (vectorizable_induction): Compute IV increments
in the type of the evolution.
* gcc.dg/vect/pr91750.c: New testcase.
From-SVN: r275685
Jonathan Wakely [Thu, 12 Sep 2019 10:51:39 +0000 (11:51 +0100)]
PR libstdc++/91748 fix std::for_each_n for random access iterators
PR libstdc++/91748
* include/bits/stl_algo.h (for_each_n): Fix random access iterator
case.
* testsuite/25_algorithms/for_each/for_each_n.cc: Test with random
access iterators.
From-SVN: r275683
Yuliang Wang [Thu, 12 Sep 2019 09:59:58 +0000 (09:59 +0000)]
Vectorise multiply high with scaling operations (PR 89386)
2019-09-12 Yuliang Wang <yuliang.wang@arm.com>
gcc/
PR tree-optimization/89386
* config/aarch64/aarch64-sve2.md (<su>mull<bt><Vwide>)
(<r>shrnb<mode>, <r>shrnt<mode>): New SVE2 patterns.
(<su>mulh<r>s<mode>3): New pattern for MULHRS.
* config/aarch64/iterators.md (UNSPEC_SMULLB, UNSPEC_SMULLT)
(UNSPEC_UMULLB, UNSPEC_UMULLT, UNSPEC_SHRNB, UNSPEC_SHRNT)
(UNSPEC_RSHRNB, UNSPEC_RSHRNT, UNSPEC_SMULHS, UNSPEC_SMULHRS)
UNSPEC_UMULHS, UNSPEC_UMULHRS): New unspecs.
(MULLBT, SHRNB, SHRNT, MULHRS): New int iterators.
(su, r): Handle the unspecs above.
(bt): New int attribute.
* internal-fn.def (IFN_MULHS, IFN_MULHRS): New internal functions.
* internal-fn.c (first_commutative_argument): Commutativity info for
above.
* optabs.def (smulhs_optab, smulhrs_optab, umulhs_optab)
(umulhrs_optab): New optabs.
* doc/md.texi (smulhs$var{m3}, umulhs$var{m3})
(smulhrs$var{m3}, umulhrs$var{m3}): Documentation for the above.
* tree-vect-patterns.c (vect_recog_mulhs_pattern): New pattern
function.
(vect_vect_recog_func_ptrs): Add it.
* testsuite/gcc.target/aarch64/sve2/mulhrs_1.c: New test.
* testsuite/gcc.dg/vect/vect-mulhrs-1.c: As above.
* testsuite/gcc.dg/vect/vect-mulhrs-2.c: As above.
* testsuite/gcc.dg/vect/vect-mulhrs-3.c: As above.
* testsuite/gcc.dg/vect/vect-mulhrs-4.c: As above.
* doc/sourcebuild.texi (vect_mulhrs_hi): Document new target selector.
* testsuite/lib/target-supports.exp
(check_effective_target_vect_mulhrs_hi): Return true for AArch64
with SVE2.
From-SVN: r275682
GCC Administrator [Thu, 12 Sep 2019 00:16:18 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r275680
Sandra Loosemore [Wed, 11 Sep 2019 20:53:46 +0000 (16:53 -0400)]
re PR middle-end/83889 (new failures on some arm targets after r256644)
2019-09-11 Sandra Loosemore <sandra@codesourcery.com>
PR testsuite/83889
gcc/testsuite/
* gcc.dg/vect/pr81740-2.c: Remove explicit dg-do run.
* gcc.dg/vect/pr88598-1.c: Likewise.
* gcc.dg/vect/pr88598-2.c: Likewise.
* gcc.dg/vect/pr88598-3.c: Likewise.
* gcc.dg/vect/pr88598-4.c: Likewise.
* gcc.dg/vect/pr88598-5.c: Likewise.
* gcc.dg/vect/pr88598-6.c: Likewise.
* gcc.dg/vect/pr89440.c: Likewise.
* gcc.dg/vect/pr90018.c: Likewise.
* gcc.dg/vect/pr91293-1.c: Likewise.
* gcc.dg/vect/pr91293-2.c: Likewise.
* gcc.dg/vect/pr91293-3.c: Likewise.
From-SVN: r275667
Steven G. Kargl [Wed, 11 Sep 2019 18:37:31 +0000 (18:37 +0000)]
re PR fortran/91553 (ICE in gfc_real2complex, at fortran/arith.c:2208)
2019-09-11 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91553
* simplify.c (gfc_convert_constant): During conversion check if the
constant is enclosed in parenthesis, and simplify expression.
2019-09-11 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91553
* gfortran.dg/pr91553.f90: New test.
From-SVN: r275657
Steven G. Kargl [Wed, 11 Sep 2019 18:27:17 +0000 (18:27 +0000)]
re PR fortran/91642 (ICE: Bad IO basetype (transfer_expr, at fortran/trans-io.c:2507))
2019-09-11 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91642
* io.c (gfc_match_inquire): null() cannot be in an iolength inquire
list.
2019-09-11 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/91642
* gfortran.dg/pr91642.f90: New test.
From-SVN: r275655
Michael Meissner [Wed, 11 Sep 2019 18:20:57 +0000 (18:20 +0000)]
Simplify the code.
2019-09-11 Michael Meissner <meissner@linux.ibm.com>
* config/rs6000/predicates.md (non_add_cint_operand): Simplify the
code.
From-SVN: r275652
Ian Lance Taylor [Wed, 11 Sep 2019 14:25:52 +0000 (14:25 +0000)]
compiler: suppress type descriptor generation for aliases
Change Named_object::get_backend to ignore aliases when creating type
descriptors for types, to be consistent with
Type::needs_specific_type_functions and the Specific_type_functions
traversal class. For example, when compiling a package that creates an
alias to an an externally defined type, e.g.
import "foo"
type MyFoo = foo.Foo
it makes sense to skip the alias (not try to generate type specific
functions for it) and let the normal mechanisms take care of the alias
target, depending on whether the target is defined locally or defined
elsewhere.
Testcase for this problen can be found in CL 193261.
Fixes golang/go#33866.
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/191961
From-SVN: r275651
Ian Lance Taylor [Wed, 11 Sep 2019 14:06:05 +0000 (14:06 +0000)]
golang.org/x/sys/cpu: define doinit when needed
Should fix the build on riscv64 and other systems.
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/194641
From-SVN: r275650
Ian Lance Taylor [Wed, 11 Sep 2019 12:44:12 +0000 (12:44 +0000)]
gotest: force test package to be imported first
When compiling the x_test package, force the test package to be
imported first. That ensures that we will see the types defined in
the test package before the types defined in the non-test version of
the package. This matters if the types differ in some way, such as by
adding a new method.
This avoids a failure in internal/poll on Solaris, in which the test
package adds a method to a type (FD.EOFError). I think it was Solaris-
specific because files are sorted in a different order by default.
The go tool handles this kind of thing correctly, by rebuilding
dependent packages. This is just a hack sufficient to run the libgo
testsuite without using the go tool.
Fixes https://gcc.gnu.org/PR91712
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/194637
From-SVN: r275648
Jonathan Wakely [Wed, 11 Sep 2019 11:38:23 +0000 (12:38 +0100)]
Fix Xmethod for shared_ptr::use_count()
This was reported in https://bugzilla.redhat.com/show_bug.cgi?id=
1749578
* python/libstdcxx/v6/xmethods.py (SharedPtrUseCountWorker.__call__):
Fix syntax error.
From-SVN: r275644
Jonathan Wakely [Wed, 11 Sep 2019 11:38:15 +0000 (12:38 +0100)]
Fix libstdc++ tests for -Wvolatile warnings in C++2a mode
* testsuite/20_util/result_of/sfinae_friendly_1.cc: Add -Wno-volatile
for C++2a and up. Define HAS_52748_FIXED and fix incorrect tests.
* testsuite/tr1/3_function_objects/result_of.cc: Add -Wno-volatile
for C++2a and up.
From-SVN: r275643
Jakub Jelinek [Wed, 11 Sep 2019 11:37:39 +0000 (13:37 +0200)]
re PR rtl-optimization/89435 (wrong code with -O1 -march=armv4 -fno-forward-propagate with __builtin_sub_overflow())
PR rtl-optimization/89435
PR rtl-optimization/89795
PR rtl-optimization/91720
* gcc.dg/pr89435.c: New test.
* gcc.dg/pr89795.c: New test.
* gcc.dg/pr91720.c: New test.
From-SVN: r275642
Nathan Sidwell [Wed, 11 Sep 2019 11:28:00 +0000 (11:28 +0000)]
[PATCH] some tree struct marking
https://gcc.gnu.org/ml/gcc-patches/2019-09/msg00697.html
gcc/
* tree.h (MARK_TS_TYPE_NON_COMMON): New.
* tree.c (tree_node_structure_for_code): Reformat and alphabetize.
gcc/cp/
* c-objcp-common.c (cp-objcp-common.c): Alphababetize and
correctly mark all C++ nodes.
From-SVN: r275641
Richard Biener [Wed, 11 Sep 2019 11:20:35 +0000 (11:20 +0000)]
lto-opts.c (lto_write_options): Stream -g when debug is enabled.
2019-09-11 Richard Biener <rguenther@suse.de>
* lto-opts.c (lto_write_options): Stream -g when debug is enabled.
* lto-wrapper.c (merge_and_complain): Pick up -g.
(append_compiler_options): Likewise.
(run_gcc): Re-instantiate handling -g0 at link-time.
* doc/invoke.texi (flto): Document debug info generation.
From-SVN: r275640
Richard Biener [Wed, 11 Sep 2019 11:16:54 +0000 (11:16 +0000)]
re PR tree-optimization/90387 (__builtin_constant_p and -Warray-bounds warnings)
2019-09-11 Richard Biener <rguenther@suse.de>
PR tree-optimization/90387
* vr-values.c (vr_values::extract_range_basic): After inlining
simplify non-constant __builtin_constant_p to false.
* gcc.dg/Warray-bounds-44.c: New testcase.
From-SVN: r275639
Eric Botcazou [Wed, 11 Sep 2019 10:41:27 +0000 (10:41 +0000)]
re PR rtl-optimization/89795 (wrong code with -O2 -fno-dce -fno-forward-propagate -fno-sched-pressure)
PR rtl-optimization/89795
* rtlanal.c (nonzero_bits1) <SUBREG>: Do not propagate results from
inner REGs to paradoxical SUBREGs if WORD_REGISTER_OPERATIONS is set.
From-SVN: r275635
Jakub Jelinek [Wed, 11 Sep 2019 08:34:41 +0000 (10:34 +0200)]
re PR tree-optimization/91723 (builtin fma is not optimized or vectorized as *+)
PR tree-optimization/91723
* tree-vect-stmts.c (vectorizable_call): Use types_compatible_p check
instead of pointer equality when checking if argument vectypes are
the same.
* gcc.dg/vect/vect-fma-3.c: New test.
From-SVN: r275634
Jakub Jelinek [Wed, 11 Sep 2019 08:33:55 +0000 (10:33 +0200)]
re PR middle-end/91725 (ICE in get_nonzero_bits starting with r275587)
PR middle-end/91725
* match.pd ((A / (1 << B)) -> (A >> B)): Call tree_nonzero_bits instead
of get_nonzero_bits, only call it for integral types.
* gcc.c-torture/compile/pr91725.c: New test.
From-SVN: r275633
Richard Biener [Wed, 11 Sep 2019 08:22:51 +0000 (08:22 +0000)]
revert: match.pd: Add flag_unsafe_math_optimizations check before deciding on the widest type in...
2019-09-11 Richard Biener <rguenther@suse.de>
Revert
2019-09-09 Barnaby Wilks <barnaby.wilks@arm.com>
* match.pd: Add flag_unsafe_math_optimizations check
before deciding on the widest type in a binary math operation.
* gcc.dg/fold-binary-math-casts.c: New test.
From-SVN: r275632
Tobias Burnus [Wed, 11 Sep 2019 08:14:54 +0000 (10:14 +0200)]
Update my email address
2019-09-10 Tobias Burnus <tobias@codesourcery.com>
* MAINTAINERS: Update my email address.
From-SVN: r275631
GCC Administrator [Wed, 11 Sep 2019 00:16:38 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r275622
Marek Polacek [Tue, 10 Sep 2019 23:22:37 +0000 (23:22 +0000)]
PR c++/91673 - ICE with noexcept in alias-declaration.
* parser.c (CP_PARSER_FLAGS_DELAY_NOEXCEPT): New parser flag.
(cp_parser_lambda_declarator_opt): Pass CP_PARSER_FLAGS_NONE to
cp_parser_exception_specification_opt.
(cp_parser_direct_declarator): Adjust a call to
cp_parser_exception_specification_opt.
(cp_parser_member_declaration): Pass CP_PARSER_FLAGS_DELAY_NOEXCEPT
to cp_parser_declarator if not processing a friend or typedef
declaration.
(cp_parser_late_noexcept_specifier): Adjust a call to
cp_parser_noexcept_specification_opt.
(cp_parser_noexcept_specification_opt): New parameter for parser flags,
drop the FRIEND_P parameter. Use the new parameter.
(cp_parser_exception_specification_opt): Likewise.
(cp_parser_transaction): Adjust a call to
cp_parser_noexcept_specification_opt.
(cp_parser_transaction_expression): Likewise.
* g++.dg/cpp1z/using7.C: New test.
* g++.dg/cpp1z/using8.C: New test.
From-SVN: r275617
Marek Polacek [Tue, 10 Sep 2019 21:04:33 +0000 (21:04 +0000)]
PR c++/91705 - constexpr evaluation rejects ++/-- on floats.
* constexpr.c (cxx_eval_increment_expression): Call fold_simple on
the offset.
* g++.dg/cpp1y/constexpr-incr2.C: New test.
From-SVN: r275613
Ian Lance Taylor [Tue, 10 Sep 2019 20:41:04 +0000 (20:41 +0000)]
libgo: Solaris and x/sys/cpu compatibility fixes
Restore Solaris compatibility fixes lost when internal/x/net/lif moved
to golang.org/x/net/lif. Also fix the Makefile for x/net/lif and
x/net/route.
Change x/sys/cpu to get the cache line size from goarch.sh as the
gofrontend version of internal/cpu does.
Partially based on work by Rainer Orth.
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/194438
From-SVN: r275611
Ian Lance Taylor [Tue, 10 Sep 2019 20:32:20 +0000 (20:32 +0000)]
re PR go/91621 (libgo/mksysinfo.sh: please avoid test ==)
PR go/91621
mksysinfo: change test == to test =
Fixes https://gcc.gnu.org/PR91621
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/194569
From-SVN: r275608
Ian Lance Taylor [Tue, 10 Sep 2019 20:25:32 +0000 (20:25 +0000)]
go/internal/gccgoimporter: support embedded field in pointer loop
Backport of https://golang.org/cl/194440. Original description:
If an embedded field refers to a type via a pointer, the parser needs
to know the name of the embedded field. It is possible that the
pointer type is not yet resolved. This CL fixes the parser to handle
that case by setting the pointer element type to the unresolved named
type while the pointer is being resolved.
Updates golang/go#34182
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/194562
From-SVN: r275606
Richard Sandiford [Tue, 10 Sep 2019 18:57:09 +0000 (18:57 +0000)]
Remove call_really_used_regs
After previous patches, it's now possible for call_used_regs to be
the "real" set of call-clobbered registers, without any special
handling for fixed registers. This patch therefore removes the
separate call_really_used_regs and updates the targets that define
CALL_REALLY_USED_REGISTERS so that they handle call_used_regs in
the same way that they used to handle call_really_used_regs.
With this change, it's no longer necessary for targets that define
CALL_REALLY_USED_REGISTERS to define CALL_USED_REGISTER as well.
2019-09-10 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* doc/tm.texi.in: Document that exactly one of CALL_USED_REGISTERS
and CALL_REALLY_USED_REGISTERS must be defined, and that
CALL_REALLY_USED_REGISTERS is preferred.
* doc/tm.texi: Regenerate.
* hard-reg-set.h (target_hard_regs::x_call_really_used_regs): Delete.
(call_really_used_regs): Likewise.
* reginfo.c: Raise an #error if both CALL_USED_REGISTERS and
CALL_REALLY_USED_REGISTERS are defined.
(initial_call_used_regs): Use CALL_REALLY_USED_REGISTERS as the
initial value if defined.
(initial_call_really_used_regs): Delete.
(saved_call_really_used_regs): Likewise.
(CALL_REALLY_USED_REGNO_P): Likewise.
(init_reg_sets): Remove handling of call_really_used_regs.
(save_register_info, restore_register_info, globalize_reg): Likewise.
(init_reg_sets_1): Likewise. Use call_used_regs instead of
CALL_REALLY_USED_REGNO_P. Don't set call_used_regs for registers
outside operand_reg_set.
(fix_register): Don't change call_used_regs if
CALL_REALLY_USED_REGISTERS is defined.
* config/csky/csky.h (CALL_USED_REGISTERS): Delete.
* config/csky/csky.c (get_csky_live_regs): Use call_used_regs
instead of call_really_used_regs.
(csky_conditional_register_usage): Remove the old handling of
call_used_regs and change the handling of call_really_used_regs
to use call_used_regs instead.
* config/ia64/ia64.h (CALL_USED_REGISTERS): Delete.
* config/ia64/ia64.c (fix_range): Don't set call_used_regs when
making a register fixed.
* config/m32r/m32r.h (CALL_USED_REGISTERS): Delete.
* config/m32r/m32r.c (MUST_SAVE_REGISTER): Use call_used_regs
instead of call_really_used_regs.
(m32r_conditional_register_usage): Don't set call_used_regs when
making a register fixed.
* config/mips/mips.h (CALL_USED_REGISTERS): Delete.
* config/mips/mips.c (mips_global_pointer): Use call_used_regs
instead of call_really_used_regs.
(mips_interrupt_extra_call_saved_reg_p): Likewise.
(mips_cfun_call_saved_reg_p): Likewise.
(mips_swap_registers): Remove the old handling of call_used_regs
and change the handling of call_really_used_regs to use call_used_regs
instead.
(mips_conditional_register_usage): Likewise.
* config/mn10300/mn10300.h (CALL_USED_REGISTERS): Delete.
* config/mn10300/mn10300.c (fp_regs_to_save): Use call_used_regs
instead of call_really_used_regs.
(mn10300_get_live_callee_saved_regs): Likewise.
(mn10300_expand_prologue, mn10300_expand_epilogue): Likewise.
(mn10300_conditional_register_usage): Don't set call_used_regs when
making a register fixed.
* config/rs6000/rs6000.h (CALL_USED_REGISTERS): Delete.
* config/rs6000/rs6000.c (rs6000_conditional_register_usage):
Remove the old handling of call_used_regs and change the handling
of call_really_used_regs to use call_used_regs instead.
* config/s390/s390.h (CALL_USED_REGISTERS): Delete.
* config/s390/s390.c (s390_regs_ever_clobbered): Use call_used_regs
instead of call_really_used_regs.
(s390_register_info_gprtofpr, s390_register_info): Likewise.
(s390_hard_regno_rename_ok, s390_hard_regno_scratch_ok): Likewise.
(s390_emit_prologue, s300_set_up_by_prologue): Likewise.
(s390_can_use_return_insn, s390_optimize_prologue): Likewise.
(s390_conditional_register_usage): Remove the old handling of
call_used_regs and change the handling of call_really_used_regs
to use call_used_regs instead.
* config/sh/sh.h (CALL_USED_REGISTERS): Delete.
* config/sh/sh.c (output_stack_adjust, calc_live_regs): Likewise.
(sh_fix_range, reg_unused_after): Likewise.
(sh_conditional_register_usage): Remove the old handling of
call_used_regs and change the handling of call_really_used_regs
to use call_used_regs instead.
* config/sparc/sparc.h (CALL_USED_REGISTERS): Delete.
* config/sparc/sparc.c (sparc_conditional_register_usage): Don't set
call_used_regs when making a register fixed.
* config/tilegx/tilegx.h (CALL_USED_REGISTERS): Delete.
* config/tilegx/tilegx.c (tilegx_conditional_register_usage): Don't set
call_used_regs when making a register fixed.
* config/tilepro/tilepro.h (CALL_USED_REGISTERS): Delete.
* config/tilepro/tilepro.c (tilepro_conditional_register_usage): Don't
set call_used_regs when making a register fixed.
* config/visium/visium.h (CALL_USED_REGISTERS): Delete.
* config/visium/visium.c (visium_conditional_register_usage): Remove
the old handling of call_used_regs and change the handling of
call_really_used_regs to use call_used_regs instead.
From-SVN: r275605
Richard Sandiford [Tue, 10 Sep 2019 18:57:03 +0000 (18:57 +0000)]
Hide call_used_regs in target-independent code
Now that tests of call_used_regs go through call_used_or_fixed_reg_p,
we can hide call_used_regs from target-independent code. (It still
needs to be available to targets for the conditional register usage
hooks.)
2019-09-10 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* hard-reg-set.h (call_used_regs): Only define if IN_TARGET_CODE.
(call_used_or_fixed_reg_p): Expand definition of call_used_regs.
* reginfo.c (call_used_regs): New macro.
From-SVN: r275604
Richard Sandiford [Tue, 10 Sep 2019 18:56:59 +0000 (18:56 +0000)]
Remove redundant fixed_regs tests
This patch removes redundant fixed_regs tests in things like:
!fixed_regs[i] && !call_used_or_fixed_reg_p (i)
2019-09-10 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/alpha/alpha.c (alpha_compute_frame_layout): Remove redundant
fixed_regs test.
* config/bpf/bpf.c (bpf_compute_frame_layout, bpf_expand_prologue)
(bpf_expand_epilogue): Likewise.
* config/c6x/c6x.c (c6x_save_reg): Likewise.
* config/ft32/ft32.c (ft32_expand_prologue): Likewise.
(ft32_expand_epilogue): Likewise.
* config/i386/i386.c (ix86_save_reg): Likewise.
* config/moxie/moxie.c (moxie_expand_prologue): Likewise.
(moxie_expand_epilogue): Likewise.
* config/tilegx/tilegx.c (need_to_save_reg): Likewise.
* config/tilepro/tilepro.c (need_to_save_reg): Likewise.
* config/xtensa/xtensa.c (xtensa_call_save_reg): Likewise.
From-SVN: r275603
Richard Sandiford [Tue, 10 Sep 2019 18:56:51 +0000 (18:56 +0000)]
Add call_used_or_fixed_reg_p
Similarly to the call_used_or_fixed_regs patch, this one replaces
tests of call_used_regs[i] with call_used_or_fixed_reg_p (i).
The only remaining direct uses of call_used_regs are in reginfo.c
and in the conditional register usage hooks.
Again, this is purely mechanical. A later patch will clear up the
oddities in config/ code.
2019-09-10 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* hard-reg-set.h (call_used_or_fixed_reg_p): New macro.
* cfgloopanal.c (init_set_costs): Use call_used_or_fixed_reg_p
instead of testing call_used_regs directly.
* config/aarch64/aarch64.c (aarch64_layout_frame): Likewise.
(aarch64_components_for_bb): Likewise.
* config/alpha/alpha.c (alpha_compute_frame_layout): Likewise.
* config/arc/arc.c (arc_must_save_register): Likewise.
(arc_epilogue_uses): Likewise.
* config/arm/arm.c (arm_option_override, use_return_insn): Likewise.
(legitimize_pic_address, callee_saved_reg_p): Likewise.
(arm_compute_save_reg0_reg12_mask): Likewise.
(arm_compute_save_core_reg_mask): Likewise.
(arm_get_vfp_saved_size, arm_compute_frame_layout): Likewise.
(arm_save_coproc_regs, thumb1_extra_regs_pushed): Likewise.
(cmse_nonsecure_entry_clear_before_return): Likewise.
(thumb1_expand_epilogue, arm_expand_epilogue_apcs_frame): Likewise.
(arm_expand_epilogue): Likewise.
* config/avr/avr.c (avr_regs_to_save, sequent_regs_live): Likewise.
(avr_function_arg_advance, avr_find_unused_d_reg): Likewise.
(_reg_unused_after): Likewise.
* config/bfin/bfin.c (must_save_p, expand_prologue_reg_save): Likewise.
(expand_epilogue_reg_restore, n_regs_saved_by_prologue): Likewise.
(add_to_reg, hwloop_optimize): Likewise.
* config/bpf/bpf.c (bpf_compute_frame_layout, bpf_expand_prologue)
(bpf_expand_epilogue): Likewise.
* config/c6x/c6x.c (c6x_save_reg, c6x_regno_reg_class): Likewise.
* config/cr16/cr16.c (cr16_compute_save_regs): Likewise.
* config/cris/cris.c (cris_reg_saved_in_regsave_area): Likewise.
* config/epiphany/epiphany.c (epiphany_init_reg_tables): Likewise.
(epiphany_compute_function_type, MUST_SAVE_REGISTER): Likewise.
(epiphany_output_mi_thunk, epiphany_start_function): Likewise.
* config/fr30/fr30.c (fr30_num_arg_regs): Likewise.
* config/frv/frv.c (frv_stack_info): Likewise.
* config/ft32/ft32.c (ft32_compute_frame): Likewise.
(ft32_expand_prologue, ft32_expand_epilogue): Likewise.
* config/gcn/gcn.c (gcn_compute_frame_offsets): Likewise.
(move_callee_saved_registers): Likewise.
* config/h8300/h8300.c (byte_reg): Likewise.
* config/i386/i386-options.c (ix86_set_current_function): Likewise.
* config/i386/i386.c (ix86_save_reg, ix86_expand_prologue): Likewise.
(ix86_expand_epilogue, x86_order_regs_for_local_alloc): Likewise.
* config/i386/predicates.md (sibcall_memory_operand): Likewise.
* config/ia64/ia64.c (emit_safe_across_calls, find_gr_spill): Likewise.
(next_scratch_gr_reg, ia64_compute_frame_size): Likewise.
* config/iq2000/iq2000.h (MUST_SAVE_REGISTER): Likewise.
* config/lm32/lm32.c (lm32_compute_frame_size): Likewise.
* config/m32c/m32c.c (need_to_save): Likewise.
* config/m68k/m68k.c (m68k_save_reg): Likewise.
* config/mcore/mcore.c (calc_live_regs): Likewise.
* config/microblaze/microblaze.c (microblaze_must_save_register):
Likewise.
* config/mmix/mmix.c (mmix_local_regno): Likewise.
(mmix_initial_elimination_offset, mmix_reorg): Likewise.
(mmix_use_simple_return, mmix_expand_prologue): Likewise.
(mmix_expand_epilogue): Likewise.
* config/moxie/moxie.c (moxie_compute_frame): Likewise.
(moxie_expand_prologue, moxie_expand_epilogue): Likewise.
* config/msp430/msp430.c (msp430_preserve_reg_p): Likewise.
* config/nds32/nds32.h (nds32_16bit_address_type): Likewise.
(NDS32_REQUIRED_CALLEE_SAVED_P): Likewise.
* config/nios2/nios2.c (prologue_saved_reg_p): Likewise.
* config/or1k/or1k.c (callee_saved_regno_p): Likewise.
* config/pa/pa.c (pa_expand_prologue, pa_expand_epilogue): Likewise.
* config/pdp11/pdp11.c (pdp11_saved_regno): Likewise.
* config/pru/pru.c (prologue_saved_reg_p): Likewise.
* config/riscv/riscv.c (riscv_save_reg_p): Likewise.
(riscv_epilogue_uses, riscv_hard_regno_mode_ok): Likewise.
* config/rl78/rl78.c (need_to_save): Likewise.
* config/rs6000/rs6000-logue.c (save_reg_p): Likewise.
(rs6000_stack_info, generate_set_vrsave): Likewise.
(rs6000_emit_prologue, rs6000_emit_epilogue): Likewise.
* config/rs6000/rs6000.c (rs6000_debug_reg_print): Likewise.
* config/rx/rx.c (rx_get_stack_layout): Likewise.
* config/s390/s390.c (s390_call_saved_register_used): Likewise.
* config/sh/sh.c (calc_live_regs, sh_output_mi_thunk): Likewise.
* config/sparc/sparc.c (save_global_or_fp_reg_p): Likewise.
(save_local_or_in_reg_p): Likewise.
* config/stormy16/stormy16.c (REG_NEEDS_SAVE): Likewise.
(xstormy16_epilogue_uses): Likewise.
* config/tilegx/tilegx.c (need_to_save_reg): Likewise.
* config/tilepro/tilepro.c (need_to_save_reg): Likewise.
* config/v850/v850.c (compute_register_save_size): Likewise.
* config/vax/vax.c (vax_expand_prologue): Likewise.
* config/visium/visium.c (visium_save_reg_p): Likewise.
* config/xtensa/xtensa.c (xtensa_call_save_reg): Likewise.
* cselib.c (cselib_process_insn): Likewise.
* df-scan.c (df_get_entry_block_def_set): Likewise.
* function.c (aggregate_value_p): Likewise.
* haifa-sched.c (alloc_global_sched_pressure_data): Likewise.
* ira-lives.c (process_bb_node_lives): Likewise.
* ira.c (do_reload): Likewise.
* lra-lives.c (process_bb_lives): Likewise.
* lra-remat.c (lra_remat): Likewise.
* lra.c (lra): Likewise.
* postreload.c (reload_combine_recognize_pattern): Likewise.
(reload_cse_move2add): Likewise.
* recog.c (peep2_find_free_register): Likewise.
* regrename.c (check_new_reg_p): Likewise.
* reload.c (find_equiv_reg): Likewise.
* reload1.c (reload, find_reg): Likewise.
* sel-sched.c (init_hard_regs_data): Likewise.
From-SVN: r275602
Richard Sandiford [Tue, 10 Sep 2019 18:56:43 +0000 (18:56 +0000)]
Make more use of regs_invalidated_by_call
This cleans up a couple of places in which the previous patch had:
call_used_or_fixed_regs & ~fixed_reg_set
In that context, regs_invalidated_by_call is IMO more obvious.
2019-09-10 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/frv/frv.c (frv_ifcvt_modify_tests): Use
regs_invalidated_by_call & ~fixed_reg_set instead of
call_used_or_fixed_regs & ~fixed_reg_set.
* config/sh/sh.c (output_stack_adjust): Likewise.
From-SVN: r275601
Richard Sandiford [Tue, 10 Sep 2019 18:56:37 +0000 (18:56 +0000)]
Replace call_used_reg_set with call_used_or_fixed_regs
CALL_USED_REGISTERS and call_used_regs infamously contain all fixed
registers (hence the need for CALL_REALLY_USED_REGISTERS etc.).
We try to recover from this to some extent with:
/* Contains 1 for registers that are set or clobbered by calls. */
/* ??? Ideally, this would be just call_used_regs plus global_regs, but
for someone's bright idea to have call_used_regs strictly include
fixed_regs. Which leaves us guessing as to the set of fixed_regs
that are actually preserved. We know for sure that those associated
with the local stack frame are safe, but scant others. */
HARD_REG_SET x_regs_invalidated_by_call;
Since global registers are added to fixed_reg_set and call_used_reg_set
too, it's always the case that:
call_used_reg_set == regs_invalidated_by_call | fixed_reg_set
This patch replaces all uses of call_used_reg_set with a new macro
call_used_or_fixed_regs to make this clearer.
This is part of a series that allows call_used_regs to be what is
now call_really_used_regs. It's a purely mechanical replacement;
later patches clean up obvious oddities like
"call_used_or_fixed_regs & ~fixed_regs".
2019-09-10 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* hard-reg-set.h (target_hard_regs::x_call_used_reg_set): Delete.
(call_used_reg_set): Delete.
(call_used_or_fixed_regs): New macro.
* reginfo.c (init_reg_sets_1, globalize_reg): Remove initialization
of call_used_reg_set.
* caller-save.c (setup_save_areas): Use call_used_or_fixed_regs
instead of call_used_regs.
(save_call_clobbered_regs): Likewise.
* cfgcleanup.c (old_insns_match_p): Likewise.
* config/c6x/c6x.c (c6x_call_saved_register_used): Likewise.
* config/epiphany/epiphany.c (epiphany_conditional_register_usage):
Likewise.
* config/frv/frv.c (frv_ifcvt_modify_tests): Likewise.
* config/sh/sh.c (output_stack_adjust): Likewise.
* final.c (collect_fn_hard_reg_usage): Likewise.
* ira-build.c (ira_build): Likewise.
* ira-color.c (calculate_saved_nregs): Likewise.
(allocno_reload_assign, calculate_spill_cost): Likewise.
* ira-conflicts.c (ira_build_conflicts): Likewise.
* ira-costs.c (ira_tune_allocno_costs): Likewise.
* ira-lives.c (process_bb_node_lives): Likewise.
* ira.c (setup_reg_renumber): Likewise.
* lra-assigns.c (find_hard_regno_for_1, lra_assign): Likewise.
* lra-constraints.c (need_for_call_save_p): Likewise.
(need_for_split_p, inherit_in_ebb): Likewise.
* lra-lives.c (process_bb_lives): Likewise.
* lra-remat.c (call_used_input_regno_present_p): Likewise.
* postreload.c (reload_combine): Likewise.
* regrename.c (find_rename_reg): Likewise.
* reload1.c (reload_as_needed): Likewise.
* rtlanal.c (find_all_hard_reg_sets): Likewise.
* sel-sched.c (mark_unavailable_hard_regs): Likewise.
* shrink-wrap.c (requires_stack_frame_p): Likewise.
From-SVN: r275600
Richard Sandiford [Tue, 10 Sep 2019 18:56:31 +0000 (18:56 +0000)]
Remove no_caller_save_reg_set
Reusing the reasoning from the call_fixed_reg_set patch:
for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
for (j = 1; j <= MOVE_MAX_WORDS; j++)
if (reg_save_code (i,regno_save_mode[i][j]) == -1)
should be true whenever regno_save_mode[i][j] == VOIDmode,
which it is for:
~call_used_reg_set | ~have_save_mode
So this condition amounts to:
~call_used_reg_set | ~have_save_mode | ~have_save_insn
== ~call_used_reg_set | ~savable_regs
no_caller_save_reg_set is then set if call_used_regs[i], so
no_caller_save_reg_set is:
call_used_reg_set & (~call_used_reg_set | ~savable_regs)
== call_used_reg_set & ~savable_regs
This patch expands its single user accordingly.
Note that ~savable_regs is always empty on LRA targets.
2019-09-10 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* hard-reg-set.h (target_hard_regs::x_no_caller_save_reg_set): Delete.
(no_caller_save_reg_set): Delete.
* caller-save.c (init_caller_save): Don't initialize it.
* ira-conflicts.c (ira_build_conflicts): Calculate
no_caller_save_reg_set locally from call_used_reg_set and savable_regs.
From-SVN: r275599
Richard Sandiford [Tue, 10 Sep 2019 18:56:26 +0000 (18:56 +0000)]
Remove call_fixed_reg_set
On targets that use reload, call_fixed_reg_set is structurally:
fixed_reg_set -- reginfo.c
| (call_used_reg_set & ~have_save_mode) -- first loop in init_caller_save
| ~have_save_insn -- final loop in init_caller_save
(where "have_save_mode" and "have_save_insn" are just my names).
But the final loop in init_caller_save does:
for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
for (j = 1; j <= MOVE_MAX_WORDS; j++)
if (reg_save_code (i,regno_save_mode[i][j]) == -1)
This last condition ought to be true whenever:
regno_save_mode[i][j] == VOIDmode
since either targetm.hard_regno_mode_ok (i, VOIDmode) should be
false or the VOIDmode save & restore shouldn't match any move insn.
And after the first loop, regno_save_mode[i][j] == VOIDmode whenever
!call_used_regs[i]. So the above is actually:
fixed_reg_set
| (call_used_reg_set & ~have_save_mode)
| (~call_used_reg_set | ~have_save_insn)
which simplifies to:
fixed_reg_set -- reginfo.c
| ~have_save_mode -- first loop in init_caller_save
| ~have_save_insn -- final loop in init_caller_save
| ~call_used_reg_set -- final loop in init_caller_save
So:
~call_fixed_reg_set == (~fixed_reg_set
& have_save_mode
& have_save_insn
& call_used_reg_set) [A]
All users have the form:
(call_used_reg_set or some subset) & ~(call_fixed_reg_set | ...)
i.e.:
(call_used_reg_set or some subset) & ~call_fixed_reg_set & ~(...)
We can therefore drop the "& call_used_reg_set" from [A], leaving:
~fixed_reg_set & have_save_mode & have_save_insn
This patch combines have_save_mode & have_save_insn into a single
condition "a save is possible", represented as savable_regs.
We can then substitute:
~call_fixed_reg_set --> ~fixed_reg_set & savable_regs
(registers we can actually save around calls)
The patch also sets regno_save_mode[i][j] for all registers,
in case non-default ABIs require a save when the default ABI
doesn't. This ensures that savable_regs (like fixed_reg_set but
unlike call_fixed_reg_set) isn't affected by the ABI. This only
becomes significant with later patches and at this point is just
a simplification.
Since init_caller_save is only called for reload targets,
the default assumption for LRA is that all registers are savable,
just like the default assumption before the patch was that
(~)call_fixed_reg_set == (~)fixed_reg_set.
2019-09-10 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* hard-reg-set.h (target_hard_regs::x_call_fixed_reg_set): Delete.
(target_hard_regs::x_savable_regs): New field.
(call_fixed_reg_set): Delete.
(savable_regs): New macro,
* reginfo.c (globalize_reg): Don't set call_fixed_reg_set.
(init_reg_sets_1): Likewise. Initialize savable_regs.
* caller-save.c (init_caller_save): Invoke HARD_REGNO_CALLER_SAVE_MODE
for all registers. Set savable_regs instead of call_fixed_reg_set.
(setup_save_areas, save_call_clobbered_regs): Replace uses of
~call_fixed_reg_set with ~fixed_reg_set & savable_regs.
* config/sh/sh.c (output_stack_adjust): Likewise.
From-SVN: r275598
Richard Sandiford [Tue, 10 Sep 2019 18:56:21 +0000 (18:56 +0000)]
Move c6x REGNO_REG_CLASS out of line
I have a series of patches that hides call_used_regs from target-
independent code, a knock-on effect of which is that (public) target
macros can't use call_used_regs either. This patch fixes the only
case in which that was a problem.
2019-09-10 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/c6x/c6x-protos.h (c6x_set_return_address): Declare.
* config/c6x/c6x.h (REGNO_REG_CLASS): Move implementation to
* config/c6x/c6x.c (c6x_regno_reg_class): ...this new function.
From-SVN: r275597
Jonathan Wakely [Tue, 10 Sep 2019 16:28:27 +0000 (17:28 +0100)]
Implement std::common_reference for C++20
* include/std/type_traits (__do_common_type_impl): Implement
additional COND-RES(CREF(D1), CRED(D2)) condition for C++20.
(basic_common_reference, common_reference, common_reference_t): Define
for C++20.
* testsuite/20_util/common_reference/requirements/alias_decl.cc: New
test.
* testsuite/20_util/common_reference/requirements/
explicit_instantiation.cc: New test.
* testsuite/20_util/common_reference/requirements/typedefs.cc: New
test.
From-SVN: r275594
Richard Sandiford [Tue, 10 Sep 2019 16:19:23 +0000 (16:19 +0000)]
Make get_call_rtx_from take a const rtx_insn *
Only one caller (in dwarf2out.c) was preventing get_call_rtx_from
from taking an rtx_insn *. Since that caller just passes a PATTERN,
it's a trivial change to make.
2019-09-10 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* rtl.h (get_call_rtx_from): Take a const rtx_insn * instead of an rtx.
* rtlanal.c (get_call_rtx_from): Likewise.
* dwarf2out.c (dwarf2out_var_location): Pass the insn rather
than the pattern to get_call_rtx_from.
* config/i386/i386-expand.h (ix86_notrack_prefixed_insn_p): Take
an rtx_insn * instead of an rtx.
* config/i386/i386-expand.c (ix86_notrack_prefixed_insn_p): Likewise.
From-SVN: r275593
Martin Liska [Tue, 10 Sep 2019 16:15:16 +0000 (18:15 +0200)]
Rename Deprecated to WarnRemoved in *.opt files.
2019-09-10 Martin Liska <mliska@suse.cz>
* common.opt: Use newly added WarnRemoved.
* config/aarch64/aarch64.opt: Likewise.
* config/arm/arm.opt: Likewise.
* config/i386/i386.opt: Likewise.
* config/ia64/ia64.opt: Likewise.
* config/rs6000/rs6000.opt: Likewise.
* doc/options.texi: Document WarnRemoved properly.
* dwarf2out.c (gen_producer_string): Handle renamed
OPT_SPECIAL_warn_removed.
* lto-opts.c (lto_write_options): Likewise.
* lto-wrapper.c (merge_and_complain): Likewise.
* opts-common.c (decode_cmdline_option): Likewise.
(prune_options): Likewise.
(read_cmdline_option): Likewise.
(control_warning_option): Likewise.
* opts.c (print_filtered_help): Likewise.
* optc-gen.awk: Parse for WarnRemoved and make usage
of Deprecated an error.
* opth-gen.awk: Generate new OPT_SPECIAL_warn_removed.
2019-09-10 Martin Liska <mliska@suse.cz>
* c.opt: Use newly added WarnRemoved.
From-SVN: r275592
David Edelsohn [Tue, 10 Sep 2019 14:59:37 +0000 (14:59 +0000)]
default_format_1.f90: Remove XFAIL AIX.
* gfortran.dg/default_format_1.f90: Remove XFAIL AIX.
* gfortran.dg/default_format_denormal_1.f90: Same.
From-SVN: r275591
Arnaud Charlet [Tue, 10 Sep 2019 10:17:14 +0000 (10:17 +0000)]
* doc/install.texi: Fix syntax for html generation.
From-SVN: r275589
Jonathan Wakely [Tue, 10 Sep 2019 09:08:20 +0000 (10:08 +0100)]
LWG 3266. to_chars(bool) should be deleted
The standard requires overloads of std::to_chars for char and (un)signed
integer types. This means that our constrained function template is
non-conforming, because the difference is observable when using types
that convert to an integer (e.g. wchar_t, which promotes).
As well as defining the deleted bool overload for LWG 3266, replace the
constrained function template with overloads for each type.
* include/std/charconv (to_chars): Rename to __to_chars_i. Define
non-template overloads for each signed and unsigned integer type and
char. Define deleted overload for bool (LWG 3266).
* testsuite/20_util/to_chars/1_neg.cc: Remove.
* testsuite/20_util/to_chars/3.cc: New test.
* testsuite/20_util/to_chars/lwg3266.cc: New test.
From-SVN: r275588
Jakub Jelinek [Tue, 10 Sep 2019 08:15:46 +0000 (10:15 +0200)]
re PR middle-end/91680 (Integer promotion quirk prevents efficient power of 2 division)
PR middle-end/91680
* match.pd ((A / (1 << B)) -> (A >> B)): Allow widening cast from
the shift type to type.
* gcc.dg/tree-ssa/pr91680.c: New test.
* g++.dg/torture/pr91680.C: New test.
From-SVN: r275587
Christophe Lyon [Tue, 10 Sep 2019 08:13:20 +0000 (10:13 +0200)]
[ARM/FDPIC v6 24/24] [ARM] FDPIC: Handle arm*-*-uclinuxfdpiceabi in libstdc++ configure scripts
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
libstdc++-v3/
* acinclude.m4: Handle uclinux*.
* configure: Regenerate.
* configure.host: Handle uclinux*
From-SVN: r275586
Paolo Carlini [Tue, 10 Sep 2019 08:12:28 +0000 (08:12 +0000)]
decl.c (has_designator_problem): Use cp_expr_loc_or_input_loc in error_at.
/cp
2019-09-10 Paolo Carlini <paolo.carlini@oracle.com>
* decl.c (has_designator_problem): Use cp_expr_loc_or_input_loc
in error_at.
(build_enumerator): Likewise.
(cp_finish_decl): Use DECL_SOURCE_LOCATION.
(grokdeclarator): Use id_loc in two error_at; change errror
message about constinit together constexpr to use two ranges.
/testsuite
2019-09-10 Paolo Carlini <paolo.carlini@oracle.com>
* g++.dg/cpp0x/enum29.C: Test location(s) too.
* g++.dg/cpp0x/lambda/lambda-ice10.C: Likewise.
* g++.dg/cpp2a/constinit3.C: Likewise.
* g++.dg/ext/desig4.C: Likewise.
* g++.dg/ext/label10.C: Likewise.
* g++.old-deja/g++.other/dtor3.C: Likewise.
From-SVN: r275585
Christophe Lyon [Tue, 10 Sep 2019 08:11:46 +0000 (10:11 +0200)]
[ARM/FDPIC v6 23/24] [ARM] FDPIC: Implement libitm support.
The ldaddr macro in sjlj.S needs to be updated to support the FDPIC
model.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
libitm/
* config/arm/sjlj.S (ldaddr): Add FDPIC support.
From-SVN: r275584
Christophe Lyon [Tue, 10 Sep 2019 08:10:41 +0000 (10:10 +0200)]
[ARM/FDPIC v6 22/24] [ARM][testsuite] FDPIC: Skip tests that require -static support
Since FDPIC does not support -static, skip the related tests.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
gcc/testsuite/
* lib/target-supports.exp (check_effective_target_static): Disable
for ARM FDPIC target.
From-SVN: r275583
Christophe Lyon [Tue, 10 Sep 2019 08:09:27 +0000 (10:09 +0200)]
[ARM/FDPIC v6 21/24] [ARM] FDPIC: Handle stack-protector combined patterns
The recent stack_protect_combined_set_insn and
stack_protect_combined_test_insn force recomputing of GOT base, but
need to take into account that in FDPIC mode, the PIC register is
fixed by the ABI (r9).
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
gcc/
* config/arm/arm.md (stack_protect_combined_set_insn): Handle
FDPIC mode.
(stack_protect_combined_test_insn): Likewise.
From-SVN: r275582
Christophe Lyon [Tue, 10 Sep 2019 08:08:11 +0000 (10:08 +0200)]
[ARM/FDPIC v6 19/24] [ARM][testsuite] FDPIC: Adjust pr43698.c to avoid clash with uclibc.
uclibc defines bswap_32, so use a different name in this test.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
gcc/testsuite/
* gcc.target/arm/pr43698.c (bswap_32): Rename as my_bswap_32.
From-SVN: r275581
Christophe Lyon [Tue, 10 Sep 2019 08:06:52 +0000 (10:06 +0200)]
[ARM/FDPIC v6 18/24] [ARM][testsuite] FDPIC: Enable tests on pie_enabled targets
Some tests have the "nonpic" guard, but pass on
arm*-*-uclinuxfdpiceabi because it is in PIE mode by default. Rather
than adding this target to all these tests, add the "pie_enabled"
effective target.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
gcc/testsuite/
* g++.dg/cpp0x/noexcept03.C: Add pie_enabled.
* g++.dg/ipa/devirt-c-7.C: Likewise.
* g++.dg/ipa/ivinline-1.C: Likewise.
* g++.dg/ipa/ivinline-2.C: Likewise.
* g++.dg/ipa/ivinline-3.C: Likewise.
* g++.dg/ipa/ivinline-4.C: Likewise.
* g++.dg/ipa/ivinline-5.C: Likewise.
* g++.dg/ipa/ivinline-7.C: Likewise.
* g++.dg/ipa/ivinline-8.C: Likewise.
* g++.dg/ipa/ivinline-9.C: Likewise.
* g++.dg/tls/pr79288.C: Likewise.
* gcc.dg/addr_equal-1.c: Likewise.
* gcc.dg/const-1.c: Likewise.
* gcc.dg/ipa/pure-const-1.c: Likewise.
* gcc.dg/noreturn-8.c: Likewise.
* gcc.dg/pr33826.c: Likewise.
* gcc.dg/torture/ipa-pta-1.c: Likewise.
* gcc.dg/tree-ssa/alias-2.c: Likewise.
* gcc.dg/tree-ssa/ipa-split-5.c: Likewise.
* gcc.dg/tree-ssa/loadpre6.c: Likewise.
* gcc.dg/uninit-19.c: Likewise.
From-SVN: r275580
Christophe Lyon [Tue, 10 Sep 2019 08:05:26 +0000 (10:05 +0200)]
[ARM/FDPIC v6 17/24] [ARM][testsuite] FDPIC: Handle *-*-uclinux*
Add *-*-uclinux* to tests that work on this target.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
gcc/testsuite/
* g++.dg/abi/forced.C: Add *-*-uclinux*.
* g++.dg/abi/guard2.C: Likewise.
* g++.dg/ext/cleanup-10.C: Likewise.
* g++.dg/ext/cleanup-11.C: Likewise.
* g++.dg/ext/cleanup-8.C: Likewise.
* g++.dg/ext/cleanup-9.C: Likewise.
* g++.dg/ext/sync-4.C: Likewise.
* g++.dg/ipa/comdat.C: Likewise.
* gcc.dg/
20041106-1.c: Likewise.
* gcc.dg/cleanup-10.c: Likewise.
* gcc.dg/cleanup-11.c: Likewise.
* gcc.dg/cleanup-8.c: Likewise.
* gcc.dg/cleanup-9.c: Likewise.
* gcc.dg/fdata-sections-1.c: Likewise.
* gcc.dg/fdata-sections-2.c: Likewise.
* gcc.dg/pr39323-1.c: Likewise.
* gcc.dg/pr39323-2.c: Likewise.
* gcc.dg/pr39323-3.c: Likewise.
* gcc.dg/pr65780-1.c: Likewise.
* gcc.dg/pr65780-2.c: Likewise.
* gcc.dg/pr67338.c: Likewise.
* gcc.dg/pr78185.c: Likewise.
* gcc.dg/pr83100-1.c: Likewise.
* gcc.dg/pr83100-4.c: Likewise.
* gcc.dg/strlenopt-12g.c: Likewise.
* gcc.dg/strlenopt-14g.c: Likewise.
* gcc.dg/strlenopt-14gf.c: Likewise.
* gcc.dg/strlenopt-16g.c: Likewise.
* gcc.dg/strlenopt-17g.c: Likewise.
* gcc.dg/strlenopt-18g.c: Likewise.
* gcc.dg/strlenopt-1f.c: Likewise.
* gcc.dg/strlenopt-22g.c: Likewise.
* gcc.dg/strlenopt-2f.c: Likewise.
* gcc.dg/strlenopt-31g.c: Likewise.
* gcc.dg/strlenopt-33g.c: Likewise.
* gcc.dg/strlenopt-4g.c: Likewise.
* gcc.dg/strlenopt-4gf.c: Likewise.
* gcc.dg/strncmp-2.c: Likewise.
* gcc.dg/struct-ret-3.c: Likewise.
* gcc.dg/torture/pr69760.c: Likewise.
* gcc.target/arm/div64-unwinding.c: Likewise.
* gcc.target/arm/stack-checking.c: Likewise.
* gcc.target/arm/synchronize.c: Likewise.
* gcc.target/arm/pr66912.c: Add arm*-*-uclinuxfdpiceabi.
* lib/target-supports.exp (check_effective_target_pie): Likewise.
(check_effective_target_sync_long_long_runtime): Likewise.
(check_effective_target_sync_int_long): Likewise.
(check_effective_target_sync_char_short): Likewise.
From-SVN: r275579
Christophe Lyon [Tue, 10 Sep 2019 08:04:00 +0000 (10:04 +0200)]
[ARM/FDPIC v6 16/24] [ARM][testsuite] FDPIC: Skip tests that don't work in PIC mode
Some tests fail on arm*-*-uclinuxfdpiceabi because it generates PIC
code and they don't support it: skip them. They also fail on
arm*-linux* when forcing -fPIC.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
gcc/testsuite/
* gcc.target/arm/eliminate.c: Accept only nonpic targets.
* g++.dg/other/anon5.C: Likewise.
From-SVN: r275578
Christophe Lyon [Tue, 10 Sep 2019 08:02:38 +0000 (10:02 +0200)]
[ARM/FDPIC v6 15/24] [ARM][testsuite] FDPIC: Adjust scan-assembler patterns.
In FDPIC mode, r9 is saved in addition to other registers, so update
the expected patterns accordingly.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
gcc/testsuite/
* gcc.target/arm/interrupt-1.c: Add scan-assembler pattern for
arm*-*-uclinuxfdpiceabi.
* gcc.target/arm/interrupt-2.c: Likewise.
* gcc.target/arm/pr70830.c: Likewise.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
From-SVN: r275577
Christophe Lyon [Tue, 10 Sep 2019 08:01:15 +0000 (10:01 +0200)]
[ARM/FDPIC v6 14/24] [ARM][testsuite] FDPIC: Skip unsupported tests
Several tests cannot work on ARM-FDPIC for various reasons: skip them,
or skip some directives.
gcc.dg/
20020312-2.c: Skip since it forces -fno-pic.
gcc.target/arm/:
* Skip since r9 is clobbered by assembly code:
20051215-1.c
mmx-1.c
pr61948.c
pr77933-1.c
pr77933-2.c
* Skip since the test forces armv5te which is not supported by FDPIC:
pr40887.c
pr19599.c
* Skip since FDPIC disables sibcall to external functions:
sibcall-1.c
tail-long-call
vfp-longcall-apcs
* Skip size check since it's different for FDPIC:
ivopts-2.c
ivopts-3.c
ivopts-4.c
ivopts-5.c
pr43597.c
pr43920-2.c
* Disable assembler scanning invalid for FDPIC:
pr45701-1.c
pr45701-2.c
stack-red-zone.c
* gnu2 TLS dialect is not supported by FDPIC:
tlscall.c
* Test relies on symbols not generated in FDPIC:
data-rel-2.c
data-rel-3.c
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
gcc/testsuite/
* gcc.dg/
20020312-2.c: Skip on arm*-*-uclinuxfdpiceabi.
* gcc.target/arm/
20051215-1.c: Likewise.
* gcc.target/arm/mmx-1.c: Likewise.
* gcc.target/arm/pr19599.c: Likewise.
* gcc.target/arm/pr40887.c: Likewise.
* gcc.target/arm/pr61948.c: Likewise.
* gcc.target/arm/pr77933-1.c: Likewise.
* gcc.target/arm/pr77933-2.c: Likewise.
* gcc.target/arm/sibcall-1.c: Likewise.
* gcc.target/arm/data-rel-2.c: Likewise.
* gcc.target/arm/data-rel-3.c: Likewise.
* gcc.target/arm/tail-long-call: Likewise.
* gcc.target/arm/tlscall.c: Likewise.
* gcc.target/arm/vfp-longcall-apcs: Likewise.
* gcc.target/arm/ivopts-2.c: Skip object-size test on
arm*-*-uclinuxfdpiceabi.
* gcc.target/arm/ivopts-3.c: Likewise.
* gcc.target/arm/ivopts-4.c: Likewise.
* gcc.target/arm/ivopts-5.c: Likewise.
* gcc.target/arm/pr43597.c: Likewise.
* gcc.target/arm/pr43920-2.c: Likewise.
* gcc.target/arm/pr45701-1.c: Skip scan-assembler on
arm*-*-uclinuxfdpiceabi.
* gcc.target/arm/pr45701-2.c: Likewise.
* gcc.target/arm/stack-red-zone.c: Likewise.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
From-SVN: r275576
Christophe Lyon [Tue, 10 Sep 2019 07:58:44 +0000 (09:58 +0200)]
[ARM/FDPIC v6 13/24] [ARM] FDPIC: Force LSB bit for PC in Cortex-M architecture
Without this, when we are unwinding across a signal frame we can jump
to an even address which leads to an exception.
This is needed in __gnu_persnality_sigframe_fdpic() when restoring the
PC from the signal frame since the PC saved by the kernel has the LSB
bit set to zero.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
libgcc/
* config/arm/unwind-arm.c (_Unwind_VRS_Set): Handle thumb-only
architecture.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
From-SVN: r275575
Christophe Lyon [Tue, 10 Sep 2019 07:56:43 +0000 (09:56 +0200)]
[ARM/FDPIC v6 12/24] [ARM] FDPIC: Restore r9 after we call __aeabi_read_tp
We call __aeabi_read_tp() to get the thread pointer. Since this is a
function call, we have to restore the FDPIC register afterwards.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
gcc/
* config/arm/arm.c (arm_load_tp): Add FDPIC support.
* config/arm/arm.md (FDPIC_REGNUM): New constant.
(load_tp_soft_fdpic): New pattern.
(load_tp_soft): Disable in FDPIC mode.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
From-SVN: r275574
Christophe Lyon [Tue, 10 Sep 2019 07:55:20 +0000 (09:55 +0200)]
[ARM/FDPIC v6 11/24] [ARM] FDPIC: Add support to unwind FDPIC signal frame
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
libgcc/
* unwind-arm-common.inc (ARM_SET_R7_RT_SIGRETURN)
(THUMB2_SET_R7_RT_SIGRETURN, FDPIC_LDR_R12_WITH_FUNCDESC)
(FDPIC_LDR_R9_WITH_GOT, FDPIC_LDR_PC_WITH_RESTORER)
(FDPIC_FUNCDESC_OFFSET, ARM_NEW_RT_SIGFRAME_UCONTEXT)
(ARM_UCONTEXT_SIGCONTEXT, ARM_SIGCONTEXT_R0, FDPIC_T2_LDR_R12_WITH_FUNCDESC)
(FDPIC_T2_LDR_R9_WITH_GOT, FDPIC_T2_LDR_PC_WITH_RESTORER): New.
(__gnu_personality_sigframe_fdpic): New.
(get_eit_entry): Add FDPIC signal frame support.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
From-SVN: r275573
Christophe Lyon [Tue, 10 Sep 2019 07:53:12 +0000 (09:53 +0200)]
[ARM/FDPIC v6 10/24] [ARM] FDPIC: Implement TLS support.
Support additional relocations: TLS_GD32_FDPIC, TLS_LDM32_FDPIC, and
TLS_IE32_FDPIC.
We do not support the GNU2 TLS dialect.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
gcc/
* config/arm/arm.c (tls_reloc): Add TLS_GD32_FDPIC,
TLS_LDM32_FDPIC and TLS_IE32_FDPIC.
(arm_call_tls_get_addr): Add FDPIC support.
(legitimize_tls_address): Likewise.
(arm_emit_tls_decoration): Likewise.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
From-SVN: r275572
Christophe Lyon [Tue, 10 Sep 2019 07:52:02 +0000 (09:52 +0200)]
[ARM/FDPIC v6 09/24] [ARM] FDPIC: Add support for taking address of nested function
In FDPIC mode, the trampoline generated to support pointers to nested
functions looks like:
.word trampoline address
.word trampoline GOT address
ldr r12, [pc, #8]
ldr r9, [pc, #8]
ldr pc, [pc, #8]
.word static chain value
.word GOT address
.word function's address
because in FDPIC function pointers are actually pointers to function
descriptors, we have to actually generate a function descriptor for
the trampoline.
2019--09-10 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
gcc/
* config/arm/arm.c (arm_asm_trampoline_template): Add FDPIC
support.
(arm_trampoline_init): Likewise.
(arm_trampoline_adjust_address): Likewise.
* config/arm/arm.h (TRAMPOLINE_SIZE): Likewise.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
From-SVN: r275571
Christophe Lyon [Tue, 10 Sep 2019 07:50:43 +0000 (09:50 +0200)]
[ARM/FDPIC v6 08/24] [ARM] FDPIC: Enforce local/global binding for function descriptors
Use local binding rules to decide whether we can use GOTOFFFUNCDESC to
compute the function address.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
gcc/
* config/arm/arm.c (arm_fdpic_local_funcdesc_p): New function.
(legitimize_pic_address): Enforce binding rules on function
pointers in FDPIC mode.
(arm_assemble_integer): Likewise.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
From-SVN: r275570
Christophe Lyon [Tue, 10 Sep 2019 07:49:20 +0000 (09:49 +0200)]
[ARM/FDPIC v6 07/24] [ARM] FDPIC: Avoid saving/restoring r9 on stack since it is read-only
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
gcc/
* config/arm/arm.h (PIC_REGISTER_MAY_NEED_SAVING): New helper.
* config/arm/arm.c (arm_compute_save_reg0_reg12_mask): Handle
FDPIC.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
From-SVN: r275569
Christophe Lyon [Tue, 10 Sep 2019 07:47:49 +0000 (09:47 +0200)]
[ARM/FDPIC v6 06/24] [ARM] FDPIC: Add support for c++ exceptions
The main difference with existing support is that function addresses
are function descriptor addresses instead. This means that all code
dealing with function pointers now has to cope with function
descriptors instead.
For the same reason, Linux kernel helpers can no longer be called by
dereferencing their address, so we implement wrappers that directly
call the kernel helpers.
When restoring a function address, we also have to restore the FDPIC
register value (r9).
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
gcc/
* ginclude/unwind-arm-common.h (unwinder_cache): Add reserved5
field.
libgcc/
* config/arm/linux-atomic.c (__kernel_cmpxchg): Add FDPIC support.
(__kernel_dmb): Likewise.
(__fdpic_cmpxchg): New function.
(__fdpic_dmb): New function.
* config/arm/unwind-arm.h (FDPIC_REGNUM): New define.
(gnu_Unwind_Find_got): New function.
(_Unwind_decode_typeinfo_ptr): Add FDPIC support.
* unwind-arm-common.inc (UCB_PR_GOT): New.
(funcdesc_t): New struct.
(get_eit_entry): Add FDPIC support.
(unwind_phase2): Likewise.
(unwind_phase2_forced): Likewise.
(__gnu_Unwind_RaiseException): Likewise.
(__gnu_Unwind_Resume): Likewise.
(__gnu_Unwind_Backtrace): Likewise.
* unwind-pe.h (read_encoded_value_with_base): Likewise.
libstdc++/
* libsupc++/eh_personality.cc (get_ttype_entry): Add FDPIC
support.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
From-SVN: r275568
Christophe Lyon [Tue, 10 Sep 2019 07:43:37 +0000 (09:43 +0200)]
[ARM/FDPIC v6 05/24] [ARM] FDPIC: Fix __do_global_dtors_aux and frame_dummy generation
In FDPIC, we need to make sure __do_global_dtors_aux and frame_dummy
are referenced by their address, not by pointers to the function
descriptors.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
libgcc/
* libgcc/crtstuff.c: Add support for FDPIC.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
From-SVN: r275567
Christophe Lyon [Tue, 10 Sep 2019 07:41:59 +0000 (09:41 +0200)]
[ARM/FDPIC v6 04/24] [ARM] FDPIC: Add support for FDPIC for arm architecture
The FDPIC register is hard-coded to r9, as defined in the ABI.
We have to disable tailcall optimizations if we don't know if the
target function is in the same module. If not, we have to set r9 to
the value associated with the target module.
When generating a symbol address, we have to take into account whether
it is a pointer to data or to a function, because different
relocations are needed.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
gcc/
* config/arm/arm-c.c (__FDPIC__): Define new pre-processor macro
in FDPIC mode.
* config/arm/arm-protos.h (arm_load_function_descriptor): Declare
new function.
* config/arm/arm.c (arm_option_override): Define pic register to
FDPIC_REGNUM.
(arm_function_ok_for_sibcall): Disable sibcall optimization if we
have no decl or go through PLT.
(calculate_pic_address_constant): New function.
(legitimize_pic_address): Call calculate_pic_address_constant.
(arm_load_pic_register): Handle TARGET_FDPIC.
(arm_is_segment_info_known): New function.
(arm_pic_static_addr): Add support for FDPIC.
(arm_load_function_descriptor): New function.
(arm_emit_call_insn): Add support for FDPIC.
(arm_assemble_integer): Add support for FDPIC.
* config/arm/arm.h (PIC_OFFSET_TABLE_REG_CALL_CLOBBERED):
Define. (FDPIC_REGNUM): New define.
* config/arm/arm.md (call): Add support for FDPIC.
(call_value): Likewise.
(restore_pic_register_after_call): New pattern.
(untyped_call): Disable if FDPIC.
(untyped_return): Likewise.
* config/arm/unspecs.md (UNSPEC_PIC_RESTORE): New.
gcc/testsuite/
* gcc.target/arm/fp16-aapcs-2.c: Adjust scan-assembler-times.
* gcc.target/arm/fp16-aapcs-4.c: Likewise.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
From-SVN: r275566
Christophe Lyon [Tue, 10 Sep 2019 07:39:47 +0000 (09:39 +0200)]
[ARM/FDPIC v6 03/24] [ARM] FDPIC: Force FDPIC related options unless -mno-fdpic is provided
In FDPIC mode, we set -fPIE unless the user provides -fno-PIE, -fpie,
-fPIC or -fpic: indeed FDPIC code is PIC, but we want to generate code
for executables rather than shared libraries by default.
We also make sure to use the --fdpic assembler option, and select the
appropriate linker emulation.
At link time, we also default to -pie, unless we are generating a
shared library or a relocatable file (-r). Note that static link is
not supported as it requires specifying the dynamic linker because the
executable still has to relocate itself at startup.
We also force 'now' binding since lazy binding is not supported.
We should also apply the same behavior for -Wl,-Ur as for -r, but I
couldn't find how to describe that in the specs fragment.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
gcc/
* config.gcc: Handle arm*-*-uclinuxfdpiceabi.
* config/arm/bpabi.h (TARGET_FDPIC_ASM_SPEC): New.
(SUBTARGET_EXTRA_ASM_SPEC): Use TARGET_FDPIC_ASM_SPEC.
* config/arm/linux-eabi.h (FDPIC_CC1_SPEC): New.
(CC1_SPEC): Use FDPIC_CC1_SPEC.
(MUSL_DYNAMIC_LINKER): Add -fdpic suffix when needed.
* config/arm/uclinuxfdpiceabi.h: New file.
libsanitizer/
* configure.tgt (arm*-*-*fdpiceabi): Sanitizers are
unsupported in this configuration.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
From-SVN: r275565
Christophe Lyon [Tue, 10 Sep 2019 07:37:00 +0000 (09:37 +0200)]
[ARM/FDPIC v6 02/24] [ARM] FDPIC: Handle arm*-*-uclinuxfdpiceabi in configure scripts
The new arm-uclinuxfdpiceabi target behaves pretty much like
arm-linux-gnueabi. In order to enable the same set of features, we
have to update several configure scripts that generally match targets
like *-*-linux*: in most places, we add *-uclinux* where there is
already *-linux*, or uclinux* when there is already linux*.
In gcc/config.gcc and libgcc/config.host we use *-*-uclinuxfdpiceabi
because there is already a different behaviour for *-*uclinux* target.
In libtool.m4, we use uclinuxfdpiceabi in cases where ELF shared
libraries support is required, as uclinux does not guarantee that.
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
config/
* futex.m4: Handle *-uclinux*.
* tls.m4 (GCC_CHECK_TLS): Likewise.
gcc/
* config.gcc: Handle *-*-uclinuxfdpiceabi.
libatomic/
* configure.tgt: Handle arm*-*-uclinux*.
* configure: Regenerate.
libgcc/
* config.host: Handle *-*-uclinuxfdpiceabi.
libitm/
* configure.tgt: Handle *-*-uclinux*.
* configure: Regenerate.
* libtool.m4: Handle uclinuxfdpiceabi.
From-SVN: r275564
Jonathan Wakely [Tue, 10 Sep 2019 07:35:40 +0000 (08:35 +0100)]
PR libstdc++/91711 fix failing test
PR libstdc++/91711
* testsuite/23_containers/span/get_neg.cc: Avoid ambiguity due to
0ul being a valid null pointer constant.
From-SVN: r275563
Jonathan Wakely [Tue, 10 Sep 2019 07:35:36 +0000 (08:35 +0100)]
Optimise std::remove_cv and use more helper aliases
Define partial specializations for std::remove_cv so that
std::remove_const and std::remove_volatile don't need to be
instantiated.
* include/std/type_traits (__remove_cv_t): New alias template.
(is_void, is_integral, is_floating_point, is_pointer)
(is_member_object_pointer, is_member_function_pointer, is_null_pointer)
(is_member_point), __is_signed_integer, __is_unsigned_integer)
(__make_unsigned_selector, __make_signed_selector, remove_pointer)
(__decay_selector): Use __remove_cv_t.
(remove_cv): Add partial specializations for cv-qualified types.
(__decay_t): New alias template.
(__decay_and_strip, __common_type_impl, __result_of_impl): Use
__decay_t.
(__enable_if_t): Move earlier in the file.
(_Require): Use __enable_if_t.
(swap(T&, T&)): Use _Require.
(swap(T(&)[N])): Use __enable_if_t.
From-SVN: r275562
Christophe Lyon [Tue, 10 Sep 2019 07:32:41 +0000 (09:32 +0200)]
[ARM/FDPIC 01/24] [ARM] FDPIC: Add -mfdpic option support
2019-09-10 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
* config/arm/arm.opt: Add -mfdpic option.
* doc/invoke.texi: Add documentation for -mfdpic.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
From-SVN: r275561
Edward Smith-Rowland [Tue, 10 Sep 2019 03:38:58 +0000 (03:38 +0000)]
Implement C++20 p1424 - 'constexpr' feature macro concerns...
2019-09-09 Edward Smith-Rowland <3dw4rd@verizon.net>
Implement C++20 p1424 - 'constexpr' feature macro concerns,
Issue 3256 - Feature testing macro for constexpr algorithms,
and Issue 3257 - Missing feature testing macro update from P0858.
* include/std/version (__cpp_lib_constexpr_algorithms): Bump value.
* include/bits/algorithmfwd.h: Ditto.
* include/std/utility: Ditto.
* testsuite/25_algorithms/constexpr_macro.cc: Ditto.
* testsuite/25_algorithms/cpp_lib_constexpr.cc: New check for
__cpp_lib_constexpr macro in <algorith>.
* testsuite/20_util/exchange/constexpr.cc: Add check for
__cpp_lib_constexpr macro in <utility>.
* testsuite/25_algorithms/adjacent_find/constexpr.cc: Remove check for
__cpp_lib_constexpr_algorithms.
* testsuite/25_algorithms/all_of/constexpr.cc: Ditto.
* testsuite/25_algorithms/any_of/constexpr.cc: Ditto.
* testsuite/25_algorithms/binary_search/constexpr.cc: Ditto.
* testsuite/25_algorithms/copy/constexpr.cc: Ditto.
* testsuite/25_algorithms/copy_backward/constexpr.cc: Ditto.
* testsuite/25_algorithms/copy_if/constexpr.cc: Ditto.
* testsuite/25_algorithms/copy_n/constexpr.cc: Ditto.
* testsuite/25_algorithms/count/constexpr.cc: Ditto.
* testsuite/25_algorithms/count_if/constexpr.cc: Ditto.
* testsuite/25_algorithms/equal/constexpr.cc: Ditto.
* testsuite/25_algorithms/equal_range/constexpr.cc: Ditto.
* testsuite/25_algorithms/fill/constexpr.cc: Ditto.
* testsuite/25_algorithms/fill_n/constexpr.cc: Ditto.
* testsuite/25_algorithms/find/constexpr.cc: Ditto.
* testsuite/25_algorithms/find_end/constexpr.cc: Ditto.
* testsuite/25_algorithms/find_first_of/constexpr.cc: Ditto.
* testsuite/25_algorithms/find_if/constexpr.cc: Ditto.
* testsuite/25_algorithms/find_if_not/constexpr.cc: Ditto.
* testsuite/25_algorithms/for_each/constexpr.cc: Ditto.
* testsuite/25_algorithms/generate/constexpr.cc: Ditto.
* testsuite/25_algorithms/generate_n/constexpr.cc: Ditto.
* testsuite/25_algorithms/is_heap/constexpr.cc: Ditto.
* testsuite/25_algorithms/is_heap_until/constexpr.cc: Ditto.
* testsuite/25_algorithms/is_partitioned/constexpr.cc: Ditto.
* testsuite/25_algorithms/is_permutation/constexpr.cc: Ditto.
* testsuite/25_algorithms/is_sorted/constexpr.cc: Ditto.
* testsuite/25_algorithms/is_sorted_until/constexpr.cc: Ditto.
* testsuite/25_algorithms/lexicographical_compare/constexpr.cc: Ditto.
* testsuite/25_algorithms/lower_bound/constexpr.cc: Ditto.
* testsuite/25_algorithms/merge/constexpr.cc: Ditto.
* testsuite/25_algorithms/mismatch/constexpr.cc: Ditto.
* testsuite/25_algorithms/none_of/constexpr.cc: Ditto.
* testsuite/25_algorithms/partition_copy/constexpr.cc: Ditto.
* testsuite/25_algorithms/partition_point/constexpr.cc: Ditto.
* testsuite/25_algorithms/remove/constexpr.cc: Ditto.
* testsuite/25_algorithms/remove_copy/constexpr.cc: Ditto.
* testsuite/25_algorithms/remove_copy_if/constexpr.cc: Ditto.
* testsuite/25_algorithms/remove_if/constexpr.cc: Ditto.
* testsuite/25_algorithms/replace_copy/constexpr.cc: Ditto.
* testsuite/25_algorithms/replace_copy_if/constexpr.cc: Ditto.
* testsuite/25_algorithms/replace_if/constexpr.cc: Ditto.
* testsuite/25_algorithms/reverse_copy/constexpr.cc: Ditto.
* testsuite/25_algorithms/rotate_copy/constexpr.cc: Ditto.
* testsuite/25_algorithms/search/constexpr.cc: Ditto.
* testsuite/25_algorithms/search_n/constexpr.cc: Ditto.
* testsuite/25_algorithms/set_difference/constexpr.cc: Ditto.
* testsuite/25_algorithms/set_intersection/constexpr.cc: Ditto.
* testsuite/25_algorithms/set_symmetric_difference/constexpr.cc: Ditto.
* testsuite/25_algorithms/set_union/constexpr.cc: Ditto.
* testsuite/25_algorithms/transform/constexpr.cc: Ditto.
* testsuite/25_algorithms/unique/constexpr.cc: Ditto.
* testsuite/25_algorithms/unique_copy/constexpr.cc: Ditto.
* testsuite/25_algorithms/upper_bound/constexpr.cc: Ditto.
From-SVN: r275560
Ian Lance Taylor [Tue, 10 Sep 2019 02:48:24 +0000 (02:48 +0000)]
cmd/go: look for tool build ID before hashing entire file
Also fix the key used to store the ID.
This is a significant speedup in cmd/go run time.
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/194257
From-SVN: r275559
Ian Lance Taylor [Tue, 10 Sep 2019 02:37:42 +0000 (02:37 +0000)]
compiler: permit inlining constant expressions and expression statements
This relatively minor change increases the number of inlinable
functions/methods in the standard library from 983 to 2179.
In particular it permits inlining math/bits/RotateLeftNN. This
restores the speed of crypto/sha256 back to what it was before the
update to 1.13beta1.
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/194340
From-SVN: r275558
Marek Polacek [Tue, 10 Sep 2019 02:29:13 +0000 (02:29 +0000)]
PR c++/84374 - diagnose invalid uses of decltype(auto).
* decl.c (grokdeclarator): Diagnose wrong usage of decltype(auto) in
a function declaration.
* g++.dg/cpp1y/auto-fn57.C: New test.
From-SVN: r275557
GCC Administrator [Tue, 10 Sep 2019 00:16:23 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r275555
Ian Lance Taylor [Mon, 9 Sep 2019 23:13:08 +0000 (23:13 +0000)]
misc/cgo/testcshared: restore gofrontend-local changes
They were lost when the files were moved in the update to Go1.13beta1.
These changes should be made in the master repo for the 1.14 release,
as riscv64 support is added there.
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/194343
From-SVN: r275551
Ian Lance Taylor [Mon, 9 Sep 2019 20:08:32 +0000 (20:08 +0000)]
libgo: only build x/sys/cpu/cpu_gccgo.c on x86 systems
The C file has a build tag, but the procedure we use for building C
files ignores build tags.
This should fix the libgo build on non-x86 systems.
Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/194378
From-SVN: r275544
projects / gcc.git / log