*** empty log message ***

daily update

Reviewed and approved by Daniel Jacobowitz

2006-02-19  Fred Fish  <fnf@specifix.com>
* gdb.base/pc-fp.exp (get_valueofx): Don't print environment
specifix hex value as part of results.
* gdb.base/shreloc.exp (get_msym_addrs): Ditto.

2006-02-19  Randolph Chung  <tausq@debian.org>

* hppa-tdep.c (hppa_in_solib_call_trampoline): Only use if no
unwind entry.

*** empty log message ***

daily update

2006-02-16  Fred Fish  <fnf@specifix.com>
* eval.c (evaluate_subexp_standard):  For OP_TYPE, return
a non lval value zero, of the appropriate type, when avoiding
side effects.
* typeprint.c (ptype_eval): Remove function and declaration.
(ptype_command): Simplify to just a call to whatis_exp.

2006-02-17  Fred Fish  <fnf@specifix.com>
* gdb.texinfo (Symbols): Update descriptions of 'whatis' and
'ptype' commands to reflect the fact that the only significant
difference between them is that ptype prints the complete type
description instead of just the name.

2006-02-16  Fred Fish  <fnf@specifix.com>
* gdb.base/whatis.c: Define variables using typedefs char_addr,
ushort_addr, and slong_addr, so the typedefs are not optimized
away.
* gdb.base/whatis.exp: Add tests using type name for struct type,
union type, enum type, and typedef.

*** empty log message ***

daily update

* elf32-frv.c (elf32_frv_grok_prstatus, elf32_frv_grok_psinfo):
New functions.
* elf_backend_grok_prstatus, elf_backend_grok_psinfo): Define.

Add support for the Infineon XC16X.

* readelf.c (get_machine_flags): Add logic for missing EF_SH flags.

* elf32-ppc.c (allocate_dynrelocs): Tweak undef weak handling.
* elf64-ppc.c (allocate_dynrelocs): Likewise.

PR ld/2218
* elf64-ppc.c (allocate_dynrelocs): Ensure undef weak sym is
dynamic.
(ppc64_elf_relocate_section): Check output reloc section size.
* elf32-ppc.c (allocate_dynrelocs): Simplify undef weak test.

*** empty log message ***

daily update

2006-02-16  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/2322
* elf.c (get_segment_type): New function.
(_bfd_elf_print_private_bfd_data): Use it.
(print_segment_map): New function.
(assign_file_positions_for_segments): Call print_segment_map
when there are not enough room for program headers.

bfd:
* config.bfd (mips*el-*-netbsd*, mips*-*-netbsd*): Use
traditional MIPS ELF targets.

gas:
* configure.tgt: set emulation for mips-*-netbsd*

ld:
* configure.tgt (mips*el-*-netbsd*, mips*-*-netbsd*):
Use the traditional target.

*** empty log message ***

daily update

2006-02-15  H.J. Lu  <hongjiu.lu@intel.com>

PR binutils/2338
* dwarf2.c (check_function_name): New function.
(_bfd_dwarf2_find_nearest_line): Use check_function_name to
check if function is correct.

2006-02-15  Paul Brook  <paul@codesourcery.com>

* arm-tdep.c (arm_skip_prologue, thumb_get_next_pc, arm_get_next_pc):
Load insn opcodes as unsigned values.

* linux-low.c (regsets_store_inferior_registers): Read the regset
from the target before filling it.

* elflink.c (_bfd_elf_default_action_discarded): Return 0 for
debug sections.
(elf_link_input_bfd): Adjust comments.

*** empty log message ***

daily update

Update copyright notice

* doublest.h (DOUBLEST): Use long double only if we can scan
it in.  Undefine HAVE_LONG_DOUBLE otherwise.
(DOUBLEST_FORMAT): New.
* c-exp.y (parse_number): Use it.
* jv-exp.y (parse_number): Likewise.
* objc-exp.y (parse_number): Likewise.
* p-exp.y (parse_number): Likewise.
* varobj.c (free_variable): Silence type-punning warnings.
* tui/tui-data.h (struct tui_list): Change type of list member.
* tui/tui-data.c: Remove no-longer-needed type casts.
(source_windows): Silence type-punning warnings.
* tui/tui-stack.c, tui/tui-win.c, tui/tui-winsource.c: Likewise.

Fix PR breakpoints/2080.
* i386-tdep.c (struct i386_frame_cache): Add stack_align member.
(i386_analyze_stack_align): New function.
(i386_analyze_prologue): Use i386_analyze_stack_align.
(i386_frame_cache): Deal with stack realignment.

2006-02-14  Paolo Bonzini  <bonzini@gnu.org>

Sync from gcc:

2006-01-31  Richard Guenther  <rguenther@suse.de>
    Paolo Bonzini  <bonzini@gnu.org>

        * Makefile.def (target_modules): Add libgcc-math target module.
        * configure.in (target_libraries): Add libgcc-math target library.
        (--enable-libgcc-math): New configure switch.
        * Makefile.in: Re-generate.
        * configure: Re-generate.
        * libgcc-math: New toplevel directory.

2006-01-18  Richard Henderson  <rth@redhat.com>
            Jakub Jelinek  <jakub@redhat.com>
            Diego Novillo  <dnovillo@redhat.com>

        * libgomp: New directory.
        * Makefile.def: Add target_module libgomp.
        * Makefile.in: Regenerate.
        * configure.in (target_libraries): Add target-libgomp.
        * configure: Regenerate.

2006-02-14  Paolo Bonzini  <bonzini@gnu.org>
    Andreas Schwab  <schwab@suse.de>

* configure: Regenerate.

config:
2006-02-14  Paolo Bonzini  <bonzini@gnu.org>
            Andreas Schwab  <schwab@suse.de>

        * acx.m4 (NCN_STRICT_CHECK_TARGET_TOOLS): Use correct program name.
(ACX_CHECK_INSTALLED_TARGET_TOOL): Likewise, and always set $1.

Use more functions from gdb-ui.el.
(gdb-break-list-regexp): Match "what" field if present.
(gdb-stack-list-frames-regexp): Match "from" field if present.
(gdb-stack-list-frames-handler): Present output like "info
breakpoints" so regexps can be shared with gdb-ui

*** empty log message ***

gas/
* config.in: Rebuilt.
binutils/
* config.in: Rebuilt.

* config/tc-xtensa.c (xg_add_opcode_fix): Number operands starting
from 1, not 0, in error messages.
(md_assemble): Simplify special-case check for ENTRY instructions.
(tinsn_has_invalid_symbolic_operands): Do not include opcode and
operand in error message.

*** empty log message ***

daily update

* gdb.arch/i386-prologue.exp: Add testcase for PR breakpoints/2080.

gdb/testsuite/ChangeLog:
2006-02-13  Jim Blandy  <jimb@redhat.com>

* gdb.base/scope.exp (test_at_main): Remove logic to handle the
case where it takes two "next" commands to skip past the init
call.

gas:
* configure.tgt (arm-*-linux-gnueabi*): Change to
arm-*-linux-*eabi*.

ld:
* configure.tgt (arm*b-*-linux-gnueabi): Change to
arm*b-*-linux-*eabi.
(arm*-*-linux-gnueabi): Change to arm*-*-linux-*eabi.

Reviewed and approved by Jim Blandy

2006-02-12  Fred Fish  <fnf@specifix.com>
* gdb.base/scope.exp (test_at_main): Use gdb_test_multiple
to handle cases where it takes two "next" commands to skip
past the init call.

* gdbint.texinfo (Watchpoints): Delete
        TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT.

*** empty log message ***

daily update

2006-02-12  H.J. Lu  <hongjiu.lu@intel.com>

* gas/i386/x86-64-crx-suffix.d: Undo the last change.

merge from gcc

*** empty log message ***

daily update

gas/testsuite/

2006-02-11  H.J. Lu  <hongjiu.lu@intel.com>

* gas/i386/i386.exp: Add "x86-64-drx" and "x86-64-drx-suffix".

* gas/i386/x86-64-crx-suffix.d: Minor update.

* gas/i386/x86-64-drx-suffix.d: New file.
* gas/i386/x86-64-drx.d: Likewise.
* gas/i386/x86-64-drx.s: Likewise.

opcodes/

2006-02-11  H.J. Lu  <hongjiu.lu@intel.com>

* i386-dis.c (dis386_twobyte): Use "movZ" for debug register
moves.

gas/testsuite/

2006-02-11  H.J. Lu  <hongjiu.lu@intel.com>

* gas/i386/i386.exp: Add "x86-64-crx" and "x86-64-crx-suffix".

* gas/i386/x86-64-crx-suffix.d: New file.
* gas/i386/x86-64-crx.d: Likewise.
* gas/i386/x86-64-crx.s: Likewise.

opcodes/

2006-02-11  H.J. Lu  <hongjiu.lu@intel.com>

* i386-dis.c ('Z'): Add a new macro.
(dis386_twobyte): Use "movZ" for control register moves.

*** empty log message ***

daily update

* NEWS: Mention native Windows support.
* Makefile.in (gdb_select_h, ser_tcp_h): New.
(ALLDEPFILES): Add ser-mingw.c.
(event-loop.o, inflow.o, mingw-hdep.o, posix-hdep.o, ser-base.o)
(ser-tcp.o, ser-unix.o): Update.
(ser-mingw.o): New rule.
* configure: Regenerated.
* configure.ac: Add ser-mingw.o for mingw32.
* ser-mingw.c: New file.
* event-loop.c: Include "gdb_select.h".
(gdb_select): Remove, moved to mingw-hdep.c and posix-hdep.c.
* ser-base.c: Include "gdb_select.h".
(ser_base_wait_for): Use gdb_select.
* serial.c (serial_for_fd): New function.
(serial_fdopen): Try "terminal" before "hardwire".  Initialize
the allocated struct serial.
(serial_wait_handle): New function.
* serial.h (serial_for_fd, serial_wait_handle): New prototypes.
(struct serial_ops) [USE_WIN32API]: Add wait_handle.
* gdb_select.h: New file.
* ser-tcp.c: Include "ser-tcp.h".  Remove unused "ser-unix.h" include.
(net_close, net_read_prim, net_write_prim): Make global.
(net_open): Likewise.  Pass an exception set to select.  Whitespace fix.
Document why we can not use gdb_select.
(_initialize_ser_tcp) [USE_WIN32API]: Do not register TCP support here.
* ser-tcp.h: New file.
* inflow.c (gdb_has_a_terminal): Don't initialize stdin_serial here.
(handle_sigio): Use gdb_select.
(initialize_stdin_serial): New function.
* terminal.h (initialize_stdin_serial): New prototype.
* top.c (gdb_init): Call initialize_stdin_serial.
* mingw-hdep.c (gdb_select): New function, moved from gdb_select in
event-loop.c.  Add exception condition support.  Use serial_for_fd
and serial_wait_handle.  Fix timeout handling.
* posix-hdep.c: Include "gdb_select.h".
(gdb_select): New function.
* remote-st.c (connect_command): Use gdb_select.
* ser-unix.c: Include "gdb_select.h".
(hardwire_send_break, wait_for): Use gdb_select.

* Makefile.in (mingw-hdep.o, posix-hdep.o): New dependencies.
(ALLDEPFILES): Add mingw-hdep.c and posix-hdep.c.
* configure.ac: Add gdb_host_obs to CONFIG_OBS.  Set gdb_host_obs
to posix-hdep.o by default.
* configure: Regenerated.
* configure.host: Document gdb_host_obs.  Add an entry for
i[34567]86-*-mingw32*.
* mingw-hdep.c, posix-hdep.c: New files.
* utils.c (safe_strerror): Remove, moved to posix-hdep.o.

    * defs.h (gdb_osabi): New enum value GDB_OSABI_AIX.
        * osabi.c (gdb_osabi_name): Add name of new value GDB_OSABI_AIX.
        * rs6000-tdep.h: New file.
        * rs6000-tdep.c: Include "rs6000-tdep.h".
        (rs6000_gdbarch_init): Remove enabling of software single step.
        Will be done in the AIX-specific initialization routine.
        * rs6000-aix-tdep.c: New file.
        * config/powerpc/aix.mt (TDEPFILES): Add rs6000-aix-tdep.o.
        * Makefile.in (rs6000_tdep_h): New variable.
        (rs6000-tdep.o): Update dependencies.
        (rs6000-aix-tdep.o): New rule.

    * aix-thread.c (_initialize_aix_thread): Use add_setshow_boolean_cmd
        instead of add_setshow_zinteger_cmd to defined the aix-thread
        boolean setting.

2006-02-10  H.J. Lu  <hongjiu.lu@intel.com>

* elf.c (copy_private_bfd_data): Minor update.

bfd/

2006-02-10  H.J. Lu  <hongjiu.lu@intel.com>

PR binutils/2258
* elf.c (copy_private_bfd_data): Renamed to ...
(rewrite_elf_program_header): This.
(copy_elf_program_header): New function.
(copy_private_bfd_data): Likewise.

binutils/

2006-02-10  H.J. Lu  <hongjiu.lu@intel.com>

PR binutils/2258
* readelf.c (process_program_headers): Use
ELF_IS_SECTION_IN_SEGMENT_MEMORY.

include/elf/

2006-02-10  H.J. Lu  <hongjiu.lu@intel.com>

PR binutils/2258
* internal.h (ELF_IS_SECTION_IN_SEGMENT_FILE): New.
(ELF_IS_SECTION_IN_SEGMENT_MEMORY): Likewise.

(check_range): Ensure that the sign bit of a 32-bit value is propagated into
the upper bits of a 64-bit long.

Fix casts to allow for a 64-bit host.

Fix %hi() operator for 64-bit hosts.

Update to reflect changes in Emacs 22.0.50.

*** empty log message ***

(GDB/MI Breakpoint Table Commands): Add fullname and
times fields where needed.  Fix typos.  Update general form given
for output of -break-insert.
(GDB/MI): Abbreviate some unnecessarily long fullnames.

*** empty log message ***

* config/tc-xtensa.c (xg_assembly_relax): Increment steps_taken for
each relaxation step.

*** empty log message ***

daily update

Add missing ChangeLog entries.

* dwarf2read.c (struct dwarf2_per_cu_data): Reduce length to
30 bits.  Add load_all_dies flag.
(load_partial_dies): Load all DIEs if per_cu->load_all_dies is set.
Load DW_TAG_member by default.  Remove internal_error call.
(find_partial_die): Reload the compilation unit if we can not find
a DIE in the cache.  Call internal_error here if we still can not
find the DIE.

2006-02-09  Eric Botcazou  <ebotcazou@libertysurf.fr>

* configure.in (CHECK_DECLS): Add vsnprintf.
* configure: Regenerate.
* messages.c (errno.h, stdarg.h, varargs.h, va_list):
Do not include/declare here, but...
* as.h: Move code detecting VARARGS idiom to the top.
(errno.h, stdarg.h, varargs.h, va_list): ...here.
(vsnprintf): Declare if not already declared.

* configure.in (CHECK_DECLS): Add snprintf and vsnprintf.
* configure: Regenerate.
* objdump.c (fprintf): Remove declaration.
* bucomm.h (fprintf): Declare if not already declared.
(snprintf): Likewise.
(vsnprintf): Likewise.

(print_one_breakpoint): Add break to case
bp_catch_vfork in switch statement.

*** empty log message ***

*** empty log message ***

2006-02-08  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/2290
* NEWS: Updated for the Linux linker search order change.

* emultempl/elf32.em (gld${EMULATION_NAME}_after_open): Call
gld${EMULATION_NAME}_check_ld_so_conf before checking default
search directories for DT_NEEDED entries.

2006-02-08  H.J. Lu  <hongjiu.lu@intel.com>

* as.c (close_output_file): New.
(main): Register close_output_file with xatexit before
dump_statistics. Don't call output_file_close.

*** empty log message ***

daily update

* server.c (attach_inferior): Return SIGTRAP for a successful
attach.

2006-02-08  H.J. Lu  <hongjiu.lu@intel.com>

* readelf.c (process_program_headers): Match PT_TLS segment
only with SHT_TLS sections.

* config/i386/nm-i386sol2.h: Update copyright year.
        * config/mips/nm-irix5.h: Ditto.
        * config/sparc/nm-sol2.h: Ditto.
        * s390-nat.c: Ditto.
        * ppc-linux-nat.c: Ditto.

* breakpoint.c (TARGET_REGION_OK_FOR_HW_WATCHPOINT): Delete.
* config/i386/nm-i386sol2.h (TARGET_REGION_OK_FOR_HW_WATCHPOINT): New.
(TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
* config/mips/nm-irix5.h (TARGET_REGION_OK_FOR_HW_WATCHPOINT): New.
(TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
* config/sparc/nm-sol2.h (TARGET_REGION_OK_FOR_HW_WATCHPOINT): New.
(TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.
* inf-ttrace.c (inf_ttrace_region_ok_for_hw_watchpoint): New.
(inf_ttrace_region_size_ok_for_hw_watchpoint): Delete.
(inf_ttrace_target): Delete to_region_size_ok_for_hw_watchpoint and
add to_region_ok_for_hw_watchpoint.
* s390-nat.c (s390_region_size_ok_for_hw_watchpoint): Delete.
(s390_region_ok_for_hw_watchpoint): New.
(_initialize_s390_nat): Delete to_region_size_ok_for_hw_watchpoint
and add to_region_ok_for_hw_watchpoint.
* target.c (default_region_size_ok_for_hw_watchpoint,
debug_to_region_size_ok_for_hw_watchpoint): Delete prototype.
(update_current_target): Delete to_region_size_ok_for_hw_watchpoint
inheritance and default_region_size_ok_for_hw_watchpoint.
(default_region_ok_for_hw_watchpoint): If len is less than or equal
the length of void pointer, return ok.
(default_region_size_ok_for_hw_watchpoint): Delete.
(debug_to_region_size_ok_for_hw_watchpoint): Delete.
(setup_target_debug): Delete to_region_size_ok_for_hw_watchpoint.
* target.h (struct target_ops): Delete
to_region_size_ok_for_hw_watchpoint.
(TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT): Delete.

* ppc-linux-nat.c (PTRACE_GET_DEBUGREG, PTRACE_SET_DEBUGREG,
PTRACE_GETSIGINFO): Define.
(last_stopped_data_address): New.
(ppc_linux_check_watch_resources): New function.
(ppc_linux_region_ok_for_hw_watchpoint): New function.
(ppc_linux_insert_watchpoint): New function.
(ppc_linux_remove_watchpoint): New function.
(ppc_linux_stopped_data_address): New function.
(ppc_linux_stopped_by_watchpoint): New function.
(_initialize_ppc_linux_nat): Set the above hardware watchpoint
related target vectors.
* rs6000-tdep.c (rs6000_gdbarch_init): Set PPC architectures
to have nonsteppable watchpoint.
* target.c (default_region_ok_for_hw_watchpoint,
debug_to_region_ok_for_hw_watchpoint): New prototypes.
(update_current_target): Inherit to_region_ok_for_hw_watchpoint
and set default to_region_ok_for_hw_watchpoint.
(default_region_ok_for_hw_watchpoint): New function.
(debug_to_region_ok_for_hw_watchpoint): New function.
(setup_target_debug): Set to_region_ok_for_hw_watchpoint of
debug_target.
* target.h (struct target_ops): Add a new target vector
to_region_ok_for_hw_watchpoint.
(TARGET_REGION_OK_FOR_HW_WATCHPOINT): Define this if it is not
defined anyplace else.

*** empty log message ***

daily update

    * symfile.c (add_symbol_file_command): Abort if the user forgot
        to provide the address when the file has been loaded.

    * gdb.ada/array_return.exp: Mark the last test as expected to fail
        on hppa32 targets.

* bfd/archures.c (bfd_mach_mcf5200, bfd_mach_mcf5206e,
bfd_mach_mcf5307, bfd_mach_mcf5407, bfd_mach_mcf528x,
bfd_mach_mcfv4e, bfd_mach_mcf521x, bfd_mach_mcf5249,
bfd_mach_mcf547x, bfd_mach_mcf548x): Remove.
(bfd_mach_mcf_isa_a, bfd_mach_mcf_isa_a_div,
bfd_mach_mcf_isa_a_div_mac, bfd_mach_mcf_isa_a_div_emac,
bfd_mach_mcf_isa_aplus, bfd_mach_mcf_isa_aplus_mac,
bfd_mach_mcf_isa_aplus_emac, bfd_mach_mcf_isa_aplus_usp,
bfd_mach_mcf_isa_aplus_usp_mac, bfd_mach_mcf_isa_aplus_usp_emac,
bfd_mach_mcf_isa_b, bfd_mach_mcf_isa_b_mac, bfd_mach_mcf_isa_b_emac,
bfd_mach_mcf_isa_b_usp_float, bfd_mach_mcf_isa_b_usp_float_mac,
bfd_mach_mcf_isa_b_usp_float_emac): New.
(bfd_default_scan): Update coldfire mapping.
* bfd/bfd-in.h (bfd_m68k_mach_to_features,
bfd_m68k_features_to_mach): Declare.
* bfd/bfd-in2.h: Rebuilt.
* bfd/cpu-m68k.c (arch_info_struct): Add new coldfire machines,
adjust legacy names.
(m68k_arch_features): New.
(bfd_m68k_mach_to_features,
bfd_m68k_features_to_mach): Define.
* bfd/elf32-m68k.c (elf32_m68k_object_p): New.
(elf32_m68k_merge_private_bfd_data): Merge the CF EF flags.
(elf32_m68k_print_private_bfd_data): Print the CF EF flags.
(elf_backend_object_p): Define.
* bfd/ieee.c (ieee_write_processor): Update coldfire machines.
* bfd/libbfd.h: Rebuilt.

* gas/config/tc-m68k.c (mcf5208_control_regs, mcf5213_control_regs,
mcf5329_control_regs): New.
(not_current_architecture, selected_arch, selected_cpu): New.
(m68k_archs, m68k_extensions): New.
(archs): Renamed to ...
(m68k_cpus): ... here.  Adjust.
(n_arches): Remove.
(md_pseudo_table): Add arch and cpu directives.
(find_cf_chip, m68k_ip): Adjust table scanning.
(no_68851, no_68881): Remove.
(md_assemble): Lazily initialize.
(select_control_regs): Adjust cpu names. Add 5208, 5213, 5329.
(md_init_after_args): Move functionality to m68k_init_arch.
(mri_chip): Adjust table scanning.
(md_parse_option): Reimplement 'm' processing to add -march & -mcpu
options with saner parsing.
(m68k_lookup_cpu, m68k_set_arch, m68k_set_cpu, m68k_set_extension,
m68k_init_arch): New.
(s_m68k_cpu, s_m68k_arch): New.
(md_show_usage): Adjust.
(m68k_elf_final_processing): Set CF EF flags.
* gas/config/tc-m68k.h (m68k_init_after_args): Remove.
(tc_init_after_args): Remove.
* gas/doc/c-m68k.texi (M68K-Opts): Document -march, -mcpu options.
(M68k-Directives): Document .arch and .cpu directives.

* gas/testsuite/gas/m68k/all.exp: Add arch-cpu-1 test.
* gas/testsuite/gas/m68k/arch-cpu-1.[sd]: New.

* include/elf/m68k.h (EF_CPU32, EF_M68000, EF_CFV4E): Rename to ...
(EF_M68K_CPU32, EF_M68K_M68000, EF_M68K_CFV4E): ... here.
(EF_M68K_ISA_MASK, EF_M68K_ISA_A, EF_M68K_M68K_ISA_A_PLUS,
EF_M68K_ISA_B, EF_M68K_HW_DIV, EF_M68K_MAC_MASK, EF_M68K_MAC,
EF_M68K_EMAC, EF_M68K_USP, EF_M68K_FLOAT): New.

* include/opcode/m68k.h (m68008, m68ec030, m68882): Remove.
(m68k_mask): New.
(cpu_m68k, cpu_cf): New.
(mcf5200, mcf5206e, mcf521x, mcf5249, mcf528x, mcf5307, mcf5407,
mcf5470, mcf5480): Rename to cpu_<foo>. Add m680x0 variants.

* opcodes/m68k-dis.c (print_insn_m68k): Use
bfd_m68k_mach_to_features.

* binutils/readelf.c (get_machine_flags): Add logic for EF_M68K flags.

* MAINTAINERS: Update file based on maintainers survey.  Add
a note to Past Maintainers.  Move unresponsive or inactive
maintainers to Authorized Committers or Past Maintainers as
appropriate.  Correct Jim Kingdon's email address.  Remove
vacant areas of responsibility.

2006-02-07  Paul Brook  <paul@codesourcery.com>

ld/
* emultempl/armelf.em: Include elf/arm.h.
(arm_elf_finish): Set low address bit if enty point is a Thumb
function.
ld/testsuite/
* ld-arm/arm-elf.exp: Add thumb-entry test.
* ld-arm/thumb-entry.d: New test.
* ld-arm/thumb-entry.s: New test.

*** empty log message ***

daily update

* gdbint.texinfo (Symbol Handling): Add a section
on memory management.

* elfxx-ia64.c (elfNN_ia64_fake_sections): Set SHF_IA_64_HP_TLS
if SHF_TLS is set.

From Vladimir Prus  <ghost@cs.msu.su>:
gdb/
* breakpoint.c (print_one_breakpoint): For MI-like UI, output
fullname field.
gdb/doc/
* gdb.texinfo (Breakpoint table commands): Document the fullname
field in -break-list output.
gdb/testsuite/
* gdb.mi/mi-break.exp, gdb.mi/mi2-break.exp: Test for the fullname
field.

* elf/ia64.h (SHF_IA_64_HP_TLS): New.

*** empty log message ***