nir: do not try to merge xfb-outputs

It's tricky to merge XFB-outputs correctly, because we need there to not
be any overlaps when we get to `nir_gather_xfb_info_with_varyings` later
on. We currently trigger an assert there if we end up merging here.

So let's not even try. This is an optimization, and we can optimize this
in safe cases later if needed. For now, let's play it safe.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5329>

turnip: drop linking libfreedreno_drm

Now that it is no longer required.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5476>

freedreno/ir3: move the libdrm dependency out of shared code

The only reason for this dependency was the fd_bo used for the uploaded
shader.  But this isn't used by turnip.  Now that we've unified the
cleanup path from gallium, it isn't hard to pull the fd_bo upload/free
parts into ir3_gallium.

This cleanup has the added benefit that the shader disk-cache will not
have to deal with it.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5476>

freedreno/ir3: unify shader create/delete paths

In particular, to move the fd_bo create/delete (which is unneeded by
turnip) out of the shared ir3 code, it is useful to have a single
delete path.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5476>

zink: rework input/output location emission

glsl builtins that have no analog in spirv are emitted as regular varyings,
which means they take up a slot.

we need to ensure that there's no conflict between these regular varying
slots (from user-defined varyings) and the glsl translated builtins, so
we do that by "reserving" the max number of varying slots that can be used
by a given stage, then remapping all glsl builtins with no spirv builtin
to a packed layout location that can be consistent across stages

sort of addresses mesa/mesa#3113 except now there's 10 fewer varying slots

Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5432>

zink: handle more glsl->spirv builtin translation

this should be all of them, though the check for vertex shader stage needs
to be changed to !fragment stage at some point

Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5432>

spirv: fix using OpSampledImage with OpUndef instead of OpType{Image,Sampler}

This seems valid per the SPIR-V spec to use OpSampledImage with
OpUndef instead of OpTypeImage or OpTypeSampler. When the image
operand is undefined, SPIRV->NIR emits an undef instruction that
can be removed later by the compiler.

This fixes shader compilation crashes with Red Dead Redemption II.

Cc: mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5230>

pan/mdg: Precolour blend inputs

Instead of requiring an explicit unoptimized move, we can implicitly
colour the blend input intrinsic to r0, where it will be preloaded; this
is a simple task for RA, and does not conflict with anything. If there
are multiple duplicate loads, the latter ones can just be simple moves
which will be copypropped.

We don't need to include a explicit synthetic load, since (scanning
backwards) the read will cause the input to become live at the right
time and the lack of an explicit write will keep it live from the
beginning of the shader. So no need to make it more complicated than it
needs to be.

Saves a cycle in blend shaders.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5449>

nvir: don't use designated initialisers in C++ code

This feature only available since C++20.

Fixes: fa0a241b335 ("nvir/nir: move nir options to codegen")
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/3114
Signed-off-by: Yevhenii Kolesnikov <yevhenii.kolesnikov@globallogic.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5430>

ac: add ac_choose_spi_color_formats() to common code

It's similar between RADV and RadeonSI.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5436>

freedreno/ir3: fix ir3_nir_move_varying_inputs

ir3_nir_move_varying_inputs is broken when there a load input outside of
the first block which depends on the result of a previous load input.

This simplification/rework avoids the problem, and should also be faster.

Fixes this dEQP-VK test:

dEQP-VK.pipeline.multisample_interpolation.offset_interpolate_at_pixel_center.128_128_1.samples_2

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5465>

intel/tools: make test aware of the meson test wrapper

Suggested-by: Dylan Baker <dylan@pnwbakers.com>
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5155>

intel/tools: rewrite run-test.sh in python

Old script created files in the source directory, which is generally
considered bad form.

The rewrite to python instead of duct-taping around in the shell script
goes towards the goal of only having cross-platform python scripts,
which is also harder to make mistakes in than shell scripts.

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5155>

post_version.py: update script to the new rST way of things

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

gen_release_notes.py: update script to the new rST way of things

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

docs/release-calendar: restore missing id

I'm not sure how this got dropped, but it somehow did during conversion.
Let's restore it.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

bin/perf-annotate-jit.py: update internal reference

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

radv: update internal reference

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

docs/relnotes: update internal references

I'm not 100% sure if it feels right to update these. I mean, this keeps
links working as they should, even if exported to something else than
HTML. But it also feels a bit like history revisionism. It's probably
the right thing to do, though.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

docs: update internal references

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

README: update references to internal docs

These documents are no longer HTML files, so the internal reference
should be updated.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

docs: drop news in favour of the introduction as index-page

This kind of only makes sense once we have a separate home-page. But I
think this is a good way of showing why we should do this; Sphinx
doesn't support pagination, because it's not meant as a general-purpose
website framewrork. And for documentation, pagination is not really
something you need.

There's probably a lot more pages that should be moved into a separate
webpage, similar to this. In general, I think this should be done for
pages that don't relate to the source code too much, e.g isn't needed to
understand the code, or for instance explains how to get the source code.

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

gitlab-ci: build and deploy docs

Dunno if alpine is a good idea. It's what the gitlab docs use for most
of their examples, so that's what I've gone with... Can probably be
changed to something else if wanted.

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

docs: include specs into the generated docs

Unfortunately, it doesn't seem like there's a way to have sphinx copy
this without moving the files, becasue html_extra_path doesn't copy the
directory itself when given a directory, only files inside and
subdirectories.

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

docs: bundle extra files

These are documents that are bundled in the root of the website, and
contains some useful, extra documentation. Let's include them.

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

docs: use rst-note for highlighted text

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

docs: reformat license table as rst table

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

docs: use rst footnotes instead of manual ones

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

docs: Add the favicon to the new page.

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

docs: do not copy source-files to site

These docs have publically available sources in the first place, there's
no point in including a copy of them here as well.

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

docs: Remove version.

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

docs: add xlibdriver to table-of-contents

It's not so nice to have a hidden article, so let's add this one to the
TOC under "User Topics".

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

docs: drop open-coded toc for articles

Sphinx already provides a proper table-of-contents, so we don't need to
roll our own.

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

docs: use code-blocks

Sphinx can syntax-highlight a block if we use the right syntax.

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

docs: format notes as rst-notes

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

docs: include meson in the toctree

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

docs: use code-block with caption instead of table

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

docs: disable syntax-highlighting by default

The default is python, which we don't really do a whole lot of in
our docs, so let's just disable to none instead.

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

docs: use sphinx

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

docs: fixup heading-levels

I have no idea why pandoc messed up these headers...

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

docs: fixup broken rst

This removes a bit of markup, because it seems rst doesn't really
support markup on links this way. I'm not sure why Pandoc generates
this, but it misrenders.

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

docs: escape trailing underscores properly

In reStructuredText, a trailing underscore means a hyperlink reference,
but it seems pandoc doesn't get this right for symbols that have already
been escaped. So let's manually fix these up.

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

docs: escape asterisks

Seems pandoc messed these up, and left out some escpaing. Let's fix it
up by hand.

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

docs: escape double colons

It seems pandoc doesn't really understand that double colons needs to be
escaped. So let's fix that up by hand.

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

docs: fixup botched table

Pandoc silently fails on colspan, breaking this table. But rst supports
this just fine, so let's just hand-convert this table instead.

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

docs: delete no longer needed file

These files were used by the theming of the old website, and is no
longer needed.

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

TEMP: remove rst-conversion scripts

These have now served their purpose, so let's get rid of them again.

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

docs: convert articles to reructuredtext

This uses the previously added scripts to convert the documentation to
reStructuredText, which is both easier to read offline, and can be used
to generate modern HTML for online documentation.

No modification to the generated results have been done.

Acked-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

TEMP: add rst-conversion scripts

This is just a temporary commit, adding the scripts that performs the
automated conversion of the docs. The next commit contains the results
of the conversion, and the commit following that removes these scripts
again.

To redo the conversion in the next commit, rebase interactively to edit
this commit and delete the next one, and run './update-docs.sh' from the
root directory. Then continue the rebasing, and resolve any conflicts
that might have occurred in the manual fixes on top. Finally, build the
documentation to ensure no further fixups are needed.

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4630>

iris: drop dead #include "config.h"

There hasn't been a config.h in a long time (it was an artifact of the
autotool build).

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5350>

i965: drop dead #include "config.h"

There hasn't been a config.h in a long time (it was an artifact of the
autotool build).

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5350>

docs: update the blocks of unused EGL enums assigned to us

See src/egl/generate/egl.xml for reference.

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5309>

intel/genxml: replace gen_sort_tags.py MIT licence with SPDX equivalent

Much more readable with the same information :)

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5362>

intel/genxml: drop python 2 support for gen_sort_tags.py

Python 2 is dead and this script is only run by devs, all of which have
had python3 available for basically forever.

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5362>

v3d: add missing unlock() in error path

CoverityID: 1435701
Fixes: e5a81ac70431502bc592 ("broadcom/vc5: Don't forget to get the BO offset when opening a dmabuf.")
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5263>

turnip: remove some dead/redundant code

A bit of cleanup to reduce noise in the codebase.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5447>

ci/bare-metal: Terminate the job with an error on kernel panic.

Otherwise, we'll time out after 60 minutes of waiting for the run to
complete.

Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/2651
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5393>

ci/bare-metal: Stop fetching the git tree.

Like for LAVA, make the tradeoff of moving the test scripts and data (55k)
into the artifacts in order to make the per-build jobs not have to pull
down the git tree (hundreds of MB when you don't hit a cached container
for your specific user, which I see happen multiple times a day in my CI
runs).

To do this, we have to be a bit more careful in some places about our
working directory potentially being dirty.

Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5393>

ci/bare-metal: Use the deqp-runner bits straight out of the artifacts.

We've already uploaded and downloaded them from fd.o and put them in the
rootfs, so we can clean up the extra prep work.

Our test job now extends from .test so that the artifacts' install dir
with all the scripts is extracted.  This required moving the dependency on
meson-testing to the x86 test-gl/test-vk job blocks.

Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5393>

ci/bare-metal: Make which test to run configurable.

I'll use this to run tracie in a new job I'm working on.

Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5393>

ci/bare-metal: Reword the final output of the init script on the board.

I'm going to be adding tracie, which isn't deqp.

Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5393>

panfrost: Tiled to linear layout conversion

Tiling is expensive, so this patch converts textures that appear to be
used for streaming to a linear layout.

Performance of mpv is significantly improved, with software-decoded
1080p mp4 playback on RK3288 going from 30fps to 50fps when testing
with `--untimed --no-audio`.

To keep things simple, conversion only happens when updating the whole
texture and no mipmapping is used.

v2: Make it clear that the heuristic doesn't rely on a texture being
uninitialized, since layout switching code can get confusing (Alyssa).

Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4628>

panfrost: Create a new sampler view bo when the layout changes

Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4628>

panfrost: Move sampler view bo creation to a separate function

Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4628>

intel/compiler: Drop opt_sampler_eot()

Gen9 and Cherryview have the ability to mark texture instructions with
the End-of-thread bit under some conditions, which allows the texture
result to be written to the render target directly, rather than
returning to the EU.

In order to handle overlapping primitives correctly, we have to use the
'sendc' instruction which stalls until other threads potentially writing
to the same locations in the render target are retired. Unfortunately,
this stall happens before the texture is sampled (rather than in
parallel with stall), so for some literal edge cases (like the diagonal
edge between two triangles forming a rectangle) there can be a
performance penalty. As a result, it's probably not a good idea to use
this optimization in general.

I had planned to leave it enabled only for BLORP, where we use rectangle
primitives and are typically clearing/blitting an entire render target
without any overlapping primitives, but I noticed that the optimization
wasn't applied in some normal cases anyway. For example, in the piglit
test tests/shaders/glsl-fs-texture2d-bias.shader_test it is applied to
one BLORP-blit shader but not another due to some kind of mishandling of
register types (the destination register type of the texture operation
is UD while the color source of the render target write is F).

Additionally the instruction scheduler assumed that the combined texture
and render target write operation took 0 cycles, leading to cycle
estimates that are wildly inaccurate. Since the optimization was not
implemented for SIMD32 and our decision whether to use the SIMD32
program is made by comparing the estimated performance with that of the
SIMD16 shader, we wrongly threw out a bunch of SIMD32 programs that are
likely profitable.

   total cycles in shared programs: 472807891 -> 473784245 (0.21%)
   cycles in affected programs: 108277 -> 1084631 (901.72%)
   helped: 0
   HURT: 1290

   total sends in shared programs: 998955 -> 1000245 (0.13%)
   sends in affected programs: 1400 -> 2690 (92.14%)
   helped: 0
   HURT: 1290

   LOST:   0
   GAINED: 33

This patch shows no performance changes in Intel's Mesa performance CI.

Given the problems, the lack of evidence that the pass improves
performance, and the fact that the hardware feature was removed from
subsequent GPU generations, I think that the pass is not valuable and
should be removed.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5412>

ci: Disable some flaky tests on turnip.

These have appeared more than once in the flake reporting channel, and a
couple of them have spuriously failed marge-bot merges.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5429>

ci: Fix weird filesystem globs appearing in failed test .qpa files.

When you get a filure and go looking in the results, you'll find weird stuff like this in the XML:

Reference images fill undefined pixels with 3x3 grid pattern.
Attachment 0 (p' = p bin boot builds
dEQP-VK.renderpass.suballocation.attachment_allocation.grow_shrink.89.qpa
deqp dev etc home init install lib media mnt proc results root run sbin
set-job-env-vars.sh sys tmp usr var (1, 1, 1, 1) + (-1, -1, -1, 1))

because we were not quoting the line and 'p *' was getting expanded.

Reviewed-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5435>

docs: update calendar, add news item, and link releases notes for 20.0.8

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5444>

docs: Add sha256sums for 20.0.8

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5444>

docs: Add release notes for 20.0.8

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5444>

pan/mdg: Prefer type over regmode for schedule constraints

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5443>

pan/mdg: Analyze types for 64-bitness in RA

Instead of reg_mode.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5443>

pan/mdg: Explicitly type 64-bit uniform moves

Instead of relying on reg_mode.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5443>

turnip: add emit renderpass cache flushes for sysmem 3D CmdClearAttachments

This clear path behaves like a draw, it needs the same flush as tu_draw.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5426>

turnip: add layered 3D path clear for CmdClearAttachments

This fixes cases where the 3D path is used with layered rendering.

Fixes dEQP-VK.renderpass.suballocation.multisample_resolve.layers* failures

Note the blob's 3D fallback path behaves differently, and uses the
framebuffer information to clear each layer individually (changing the MRT
state each time). But that's not possible in all cases, and the blob fails
to clear properly in dEQP-VK.geometry.layered.*.secondary_cmd_buffer cases.
So this clear path is not based on the blob's behavior.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5426>

turnip: share code between 3D blit/clear path and tu_pipeline

Instead of filling out registers manually, fill out ir3 structs and re-use
code from tu_pipeline.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5426>

turnip: pipeline program state refactor

This refactor simplifies things a bit, and will make it easier to share
some logic with tu_clear_blit (see next patches).

This changes the order in which some things are emitted, and emits less
for disabled shader stages. There's also as extra write to SP_GS_PRIM_SIZE
that is removed.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5426>

panfrost: Demote mediump varyings to fp16

Likewise lowp.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5423>

panfrost: Override varying format to minimal precision

Spec allows this!

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5423>

panfrost: Use shader_info harder

We already have this metadata..

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5423>

panfrost: Only store varying formats

This reduces linking complexity.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5423>

panfrost: Allow R/RG/RGB varyings

This can be a bandwidth savings.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5423>

panfrost: Remove unused routines

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5423>

panfrost: Use new varying linking

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5423>

panfrost: Add high-level varying emit

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5423>

panfrost: Add helper to determine if we are capturing

That is, is the varying setup for xfb *and* is there a buffer for it?

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5423>

panfrost: Emit xfb records

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5423>

panfrost: Emit special varyings

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5423>

panfrost: Emit unlinked varyings

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5423>

panfrost: Determine varying buffer presence

Essentially the same logic as before, but the assumptions are much more
explicit.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5423>

panfrost: Introduce bitfields for tracking varyings

Rather than having all sorts of random state flyng about with varying
emission, we can use a simple present mask and general stride to encode
everything we need for non-XFB cases, and layer XFB on top easily
enough.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5423>

panfrost: Add panfrost_streamout_offset helper

Calculates the bias required for an xfb record in the src_offset field
to account for truncating the address to force alignment.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5423>

panfrost: Calculate varying size by format

Will enable <16-byte varyings.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5423>

pan/mdg: Avoid fusing ld_vary_16 with non-zero component

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5423>

aco: fix shared subdword loads

Shared subdword loads don't need byte alignment as they are split
into multiple loads if necessary.

Fixes: 5cde4989d3c8c25b0ba2a11ec450625e30092b16 ('aco: remove unnecessary split- and create_vector instructions for subdword loads')
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5441>

radv: enable radv_enable_mrt_output_nan_fixup for RAGE 2

To fix game artifacts. It's always sad to have to fix game bugs
inside drivers ...

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5359>

radv/llvm: implement radv_enable_mrt_output_nan_fixup workaround

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5359>

aco: implement radv_enable_mrt_output_nan_fixup workaround

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5359>

radv: add new drirc option radv_enable_mrt_output_nan_fixup

To replace NaN from FS with zeros to fix game bugs.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5359>

glsl: fix incorrect optimisation in opt_constant_variable()

When handling function inputs the optimisation pass incorrectly
assumes the inputs are undefined. Here we simply change things to
assume inputs have always been assigned a value. Any further
optimisations will be taken care of once function inlining takes
place.

Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/2984
Fixes: 65122e9e8038 ("ir_constant_variable: New pass to mark constant-assigned variables constant.")
Reviewed-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5413>