package/python-esptool: bump version to v3.0

zlib module is required since the v3.0 version.

Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

boot/barebox: bump version to 2020.11.0

Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/wlroots: bump to version 0.12.0

Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/bcm2835: bump version to 1.68

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rtl8723du: bump to version 9ce1c38439f4f574bb7adaf33949835c25536a28

Fix builds with kernel 5.10

Signed-off-by: Michael Fischer <mf@go-sys.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/freescale_imx8*: bump BSP components to 5.4.70_2.3.0

Bump ATF, U-Boot and Linux kernel to the NXP BSP 5.4.70_2.3.0 versions.

Build- and run-tested on:
    o i.MX8QM MEK
    o i.MX8QXP MEK rev B0

Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Tested-by: Stephane Viau <stephane.viau@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/freescale_imx8m*: bump BSP components to 5.4.70_2.3.0

Bump ATF, U-Boot and Linux kernel to the NXP BSP 5.4.70_2.3.0 versions.

Note for configs/freescale_imx8mmevk:

    On 5.4.70_2.3.0 the default "i.MX8MM LPDDR4 EVK RevB board" support is
    removed and replaced by "i.MX8MM LPDDR4 EVK with QCA WIFI revB board".

    In case an older revB board is used, then the following step in U-Boot is
    needed:

    => setenv fdt_file imx8mm-evk-revb-qca-wifi.dtb
    => saveenv
    => reset

Build- and run-tested on:
    o i.MX8MN DDR4 EVK
    o i.MX8MQ EVK
Build-tested only for other configs.

Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Tested-by: Stephane Viau <stephane.viau@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/freescale_imx7dsabresd: bump BSP components to 5.4.70_2.3.0

Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
[Build-tested only]
Tested-by: Stephane Viau <stephane.viau@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/freescale_imx6*: bump BSP components to 5.4.70_2.3.0

Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
[run-tested on i.MX6Q SabreSD, build-tested only for other configs]
Tested-by: Stephane Viau <stephane.viau@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/imx-mkimage: bump to version rel_imx_5.4.70_2.3.0

Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/freescale-imx/imx-seco: bump version to 3.7.4

- Same version as NXP release 5.4.70-2.3.0
- EULA/COPYING: update to LA_OPT_NXP_Software_License v17

Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/freescale-imx/imx-sc-firmware: bump version to 1.7.0

- Same version as NXP release 5.4.70-2.3.0
- EULA/COPYING: update to LA_OPT_NXP_Software_License v17

Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/freescale-imx/firmware-imx: bump version to 8.10

- Same version as NXP release 5.4.70-2.3.0
- EULA/COPYING: update to LA_OPT_NXP_Software_License v17

Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python{, 3}-mako: bump to version 1.1.3

Changelog: https://docs.makotemplates.org/en/latest/changelog.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/proj: bump to 7.2.1

Signed-off-by: Zoltan Gyarmati <zgyarmati@zgyarmati.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/sunxi-mali-mainline-driver: fix build failure with Linux 5.9 and 5.10

Add 2 patches pending[1] upstream to fix build failure with both Linux 5.9
and Linux 5.10 due to uaccess.h file moved after version >= 5.9 and and
due to moved code from dma-contiguous.h to dma-mapping.

[1]: https://github.com/mripard/sunxi-mali/pull/89

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/htop: needs dynamic library

htop unconditionally uses dlopen since version 3.0.3 and
https://github.com/htop-dev/htop/commit/2a9e8ca07475e61e74d7b6f0afd0a5fd272cb07f

Fixes:
 - http://autobuild.buildroot.org/results/2976729b0b95bf822c3095efbcf3f86d6c71874f

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/olsr: fix build of pud plugin

Fix build of pud plugin which was added with commit
318d160fe5b080e421dc133dff82d5ea2cf7d893

Fixes:
 - http://autobuild.buildroot.org/results/5b598d728e6aae61b295681b0d7777e83074fecd

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

fs/cpio: add zstd as compression option

U-Boot mkimage zstd is available since v2020.10:
https://gitlab.denx.de/u-boot/u-boot/-/commit/26073f9ed3ab0aaf3c2a2b433fecb30a95a067d6

Signed-off-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

boot/uboot: introduce BR2_TARGET_UBOOT_NEEDS_OPENSBI

Some RISC-V platforms (such as SiFive HiFive Unleashed) encapsulate
the OpenSBI firmware image inside U-Boot.

Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/kodi-pvr-zattoo: fix json dependency

Package depends on rapidjson, not rapidxml:
https://github.com/rbuehlma/pvr.zattoo/blob/Leia/CMakeLists.txt#L10

The bug was previously not noticed because kodi depends on rapidjson
https://github.com/xbmc/xbmc/blob/Leia/CMakeLists.txt#L133
and kodi-platform depends on kodi
https://github.com/xbmc/kodi-platform/blob/master/CMakeLists.txt#L8

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-boto3: bump to version 1.16.50

While at it, use two spaces for all the hashes.

Signed-off-by: Raphaël Mélotte <raphael.melotte@essensium.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/python-botocore: bump to version 1.19.48

Signed-off-by: Raphaël Mélotte <raphael.melotte@essensium.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

DEVELOPERS: remove S. Matyukevich from mcbin BSP components

I do not have access to MacchiatoBin hardware anymore.
So remove its BSP components from my watch list.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: fix TestATFAllwinner test

Fix U-Boot config snippet in TestATFAllwinner. Bump U-Boot
version to fix DTC build on hosts with gcc 10 and add
pylibfdt dependency.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

support/testing: remove TestATFMarvell

There were only two users of Marvell ATF: SolidRun MacchiatoBin board
and ClearFrog GT 8k board. After mv-ddr-marvell package update both
boards switched to upstream ATF. Remove tests for now unused
Marvell ATF.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/solidrun_macchiatobin: bump BSP components

Bump U-Boot and Linux kernel versions. Fix recent build failures caused
by mv-ddr-marvell package update. Marvell ATF does not provide a version
compatible with up-to-date mv-ddr-marvell. According to commit log,
Marvell developers are now contributing directly to upstream ATF. So
switch to upstream ATF instead of using older Marvell ATF versions.

Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/938922500

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/open62541: fix build without threads

Fixes:
 - http://autobuild.buildroot.org/results/87ec3c987c991f790757276316d6caf81e635fa2

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/xorriso: bump version to 1.5.2

Release notes:
https://lists.gnu.org/archive/html/bug-xorriso/2019-10/msg00005.html

Reformatted hashes.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/xterm: bump version to 363

Changelog: https://invisible-island.net/xterm/xterm.log.html

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/zziplib: bump version to 0.13.72

Changelog: https://github.com/gdraheim/zziplib/blob/master/ChangeLog

Upstream switched the project to cmake and deprecated automake:
https://github.com/gdraheim/zziplib/commit/5116d90fef820db8a9b3e52ab5a6a11f84dcfc9d

Removed dependency to host-python3 as it is needed only for tests:
https://github.com/gdraheim/zziplib/blob/master/test/CMakeLists.txt#L21

Remove GNUmakefile to fix build error as the real makefile is Makefile.
GNUnamefile includes files which do not exist after configure and fails
to include Makefile:
https://github.com/gdraheim/zziplib/blob/master/GNUmakefile#L60

Added optional dependency to SDL2.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mpv: bump version to 0.33.0

rsound support was removed:
https://github.com/mpv-player/mpv/commit/4583bd8cc7bf538bce424983d49729c934d13a53

libass is now mandatory:
https://github.com/mpv-player/mpv/commit/0b9ed9c2744ada1eefc1f254c5f3ade6c626ed72
Propagate new dependencies to tovid.

libsmbclient support was removed:
https://github.com/mpv-player/mpv/commit/3b8b7cb9d481828953f105f92bacc07a3cb2f332

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libnss: bump version to 3.60.1

Bump version to 3.60.1 and remove local patch that has been upstreamed.

Release Notes:
https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/NSS_3.60_1_release_notes

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

toolchain/toolchain-external/toolchain-external-bootlin: update PowerPC 440 FP toolchain

The Bootlin PowerPC 440 FP toolchain was rebuilt in version 2020.08-2,
which is rebased on Buildroot 2020.08.3 as that includes a fix for
SecurePLT support.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libcap-ng: set LIBCAP_NG_CPE_ID_VALID

cpe:2.3:a:libcap-ng_project:libcap-ng is a valid CPE identifier for this
package:

  https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Alibcap-ng_project%3Alibcap-ng

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/json-c: set JSON_C_CPE_ID_VALID

cpe:2.3:a:json-c_project:json-c is a valid CPE identifier for this
package:

  https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Ajson-c_project%3Ajson-c

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/lftp: set LFTP_CPE_ID_VALID

cpe:2.3:a:lftp_project:lftp is a valid CPE identifier for this package:

  https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Alftp_project%3Alftp

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/lcms2: add CPE variables

cpe:2.3:a:littlecms:little_cms is a valid CPE identifier for this
package:

  https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Alittlecms%3Alittle_cms

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/hiredis: add HIREDIS_CPE_ID_VENDOR

cpe:2.3:a:redislabs:hiredis is a valid CPE identifier for this package:

  https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Aredislabs%3Ahiredis

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/cairo: add CAIRO_CPE_ID_VENDOR

cpe:2.3:a:cairographics:cairo is a valid CPE identifier for this
package:

  https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Acairographics%3Acairo

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libmaxminddb: add LIBMAXMINDDB_CPE_ID_VENDOR

cpe:2.3:a:maxmind:libmaxminddb is a valid CPE identifier for this
package:

   https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Amaxmind%3Alibmaxminddb

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/domoticz: add DOMOTICZ_CPE_ID_VENDOR

cpe:2.3:a:domoticz:domoticz is a valid CPE identifier for this package:

  https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Adomoticz%3Adomoticz

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/wolfssl: add WOLFSSL_CPE_ID_VENDOR

cpe:2.3:a:wolfssl:wolfssl is a valid CPE identifier for this package:

  https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Awolfssl%3Awolfssl

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gst1-python: bump version to 1.18.3

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gst-omx: bump version to 1.18.3

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gstreamer1-editing-services: bump version to 1.18.3

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gst1-rtsp-server: bump version to 1.18.3

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gst1-vaapi: bump version to 1.18.3

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gst1-libav: bump version to 1.18.3

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gst1-devtools: bump version to 1.18.3

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gst1-plugins-ugly: bump version to 1.18.3

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gst1-plugins-bad: bump version to 1.18.3

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gst1-plugins-good: bump version to 1.18.3

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gst1-plugins-base: bump version to 1.18.3

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gstreamer1: bump version to 1.18.3

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/mesa3d: unconditionally needs expat

mesa3d should only need expat for a limited set of drivers. However,
the condition in their meson.build is borked:

    required: not with_platform_android or with_any_broadcom or with_any_intel

So, as soon as the platform is not android, expat is required. If it
is not already present in the configuraiotn, then meson will try to be
helpful and will try to download its own copy under the table:

    Run-time dependency expat found: NO (tried pkgconfig and cmake)
    Looking for a fallback subproject for the dependency expat
    Downloading expat source from https://github.com/libexpat/libexpat/releases/download/R_2_2_5/expat-2.2.5.tar.bz2
    <urlopen error unknown url type: https>
    A fallback URL could be specified using source_fallback_url key in the wrap file

    ../O/build/mesa3d-20.3.3/meson.build:1366:2: ERROR: could not get https://github.com/libexpat/libexpat/releases/download/R_2_2_5/expat-2.2.5.tar.bz2 is the internet available?

Ideally, we would like to fix the condition in the meson.build, to drop
the spurious and dubious condition on the android platform. However it
is not totally obvious what the prupose was, and expat compiles quikly,
so we just add expat as an unconditional mandatory dependency.

Fixes:
    http://autobuild.buildroot.org/results/f71865771482b1d71d12e77767d236ca693785d5/
    http://autobuild.buildroot.org/results/98290b9681a38b3be820017823a4a4196d474476/
    ....

Reported-by: Titouan Christophe <titouanchristophe@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
[yann.morin.1998@free.fr:
  - make it a generic fix, not tied to freedreno, reported by Fabio
  - rewrite commit log to explain the root cause
  - also reported about virgl, by Titouan
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/mesa3d: fix gallium-xa configure option

Fixes build warning:

output/build/mesa3d-20.3.2/meson.build:727: WARNING:
 gallium-xa option "false" deprecated, please use "disabled" instead.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

configs/snps_archs38_hsdk_defconfig: enable C++ support

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[yann.morin.1998@free.fr: only enable C++]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

configs/snps_archs38_hsdk_defconfig: use hard-float

Hard-float support is pretty stable, so make that default for HSDK
boards.

The hard-float setting is a bit convulated since current ARC gcc lacks
--with-fpu - so this is done with BR2_TARGET_OPTIMIZATION

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[yann.morin.1998@free.fr: split off into its own commit]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

configs/snps_archs38_hsdk_defconfig: switch to glibc

We are no longer actively working on uClibc, so make that default
for HSDK boards.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[yann.morin.1998@free.fr: drop enabling hard float]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

configs/snps_archs38_hsdk_defconfig: refresh defconfig

No config changes done

| make snps_archs38_hsdk_defconfig
| make savedefconfig

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

ARC: Add support for generic HS48 processor

For the HS48 processor, BR currently builds with -mcpu=hs4x_rel31 which
generates suboptimal code as it inhibits delay slot and back-back ST and so on.

Enable a new variant to build with -mcpu=hs4x for normal codegen.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[yann.morin.1998@free.fr:
  - simplify dependencies on MMU page size
  - wrap long lines
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/linux-pam: drop useless LINUX_PAM_CPE_ID_NAME definition

This definition is useless, because it is equal to the default value
of <pkg>_CPE_ID_NAME as calculated by generic-package.

Before and after this patch, the CPE ID calculated for the linux-pam
package is exactly the same, according to "make linux-pam-show-info".

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux, package: do not use <pkg>_NAME when defining CPE ID variables

As we discussed on the mailing list, using $(<pkg>_NAME) when defining
CPE ID variables feels a bit odd and needlessly complicated. Just use
the package name directly.

Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/ntp: add CPE ID variables

cpe:2.3:a:ntp:ntp is a valid CPE identifier for this package:

  https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Antp%3Antp

The specification of the version needs to be reworked a little
bit. Indeed, versions look like 4.2.8p15. For the download, we need to
extract 4.2 as the folder is named ntp-4.2. However, for the CPE ID we
need to extract 4.2.8 and p15 into two separate fields.

So, we set:

NTP_VERSION_MAJOR = 4.8
NTP_VERSION_MINOR = 2
NTP_VERSION_POINT = 15

and construct the version:

NTP_VERSION = $(NTP_VERSION_MAJOR).$(NTP_VERSION_MINOR)p$(NTP_VERSION_POINT)

Note that the choice of "point" comes from
http://support.ntp.org/bin/view/Main/ReleaseNumberingScheme, which
states "The letter p followed by an increasing number indicates a
Point (i.e. incremental) Release.".

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/thrift: add THRIFT_CPE_ID_VENDOR

cpe:2.3:a:apache:thrift is a valid CPE identifier for this package:

  https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Aapache%3Athrift

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/binutils: add BINUTILS_CPE_ID_VENDOR

cpe:2.3:a:gnu:binutils is a valid CPE identifier for this package:

  https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Agnu%3Abinutils

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/tcpreplay: add TCPREPLAY_CPE_ID_VENDOR

cpe:2.3:a:tcpreplay:tcpreplay is a valid CPE identifier for this
package:

  https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Atcpreplay%3Atcpreplay

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/flatbuffers: add FLATBUFFERS_CPE_ID_VENDOR

cpe:2.3:a:google:flatbuffers is a valid CPE identifier for this package:

  https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Agoogle%3Aflatbuffers

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gdk-pixbuf: add GDK_PIXBUF_CPE_ID_VENDOR

cpe:2.3:a:gnome:gdk-pixbuf is a valid CPE identifier for this package:

  https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Agnome%3Agdk-pixbuf

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/wavpack: set WAVPACK_CPE_ID_VENDOR

cpe:2.3:a:wavpack:wavpack is a valid CPE identifier for this package:

  https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Awavpack%3Awavpack

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/jhead: set JHEAD_CPE_ID_VALID

cpe:2.3:a:jhead_project:jhead is a valid CPE identifier for this
package:

  https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Ajhead_project%3Ajhead

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/erofs-utils: bump version to 1.2.1

- minor maintainence release mainly to address exist build issues;
- remove the following patches since all have been upstreamed:
    0001-erofs-utils-fix-multiple-definition-of-sbi.patch;
    0002-erofs-utils-fuse-fix-linking-when-using-with-selinux.patch;
    0003-erofs-utils-fuse-disable-backtrace-if-unsupported.patch.

Signed-off-by: Gao Xiang <hsiangkao@aol.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

configs/qemu_s390x_defconfig: bump kernel version to 5.10.7

Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/freescale-imx/firmware-imx: fix the VPU firmware location

The mainline kernel searches the coda VPU firmware inside the following
locations [1]:

/lib/firmware/
/lib/firmware/vpu/

Currently Buildroot installs the coda firmware into /lib/firmware/imx/vpu,
which is not a valid location.

Fix it by installing the coda firmwares into /lib/firmware/vpu/ which
is a valid path for both mainline and NXP vendor kernels. Also create a
symlink to /lib/firmware/ so that mainline kernels do not need to wait
more than 60 seconds to search again inside /lib/firmware/vpu/.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=8af7779f3cbc1f6720d15f00abc797493710d1ab

Reported-by: Romain Naour <romain.naour@gmail.com>
Suggested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/bluez-alsa: bump to version 3.0.0

Drop upstream patch which is included in the new version.

Add additional config option `--enable-a2dpconf` to build small (13 kB)
utility `a2dpconf` which does not depend on any external dependencies.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gmp: bump version to 6.2.1

Release notes: https://gmplib.org/gmp6.2

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/upmpdcli: bump to version 1.5.8

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/libupnpp: bump to version 0.20.2

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/openldap: add OPENLDAP_CPE_ID_VENDOR

cpe:2.3:a:openldap:openldap is a valid CPE identifier for this package:

  https://nvd.nist.gov/products/cpe/search/results?namingFormat=2.3&keyword=cpe%3A2.3%3Aa%3Aopenldap%3Aopenldap

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

configs/kontron_smarc_sal28: integrate RCW into rootfs image

Integrate the RCW into the storage device image, so the image can also
be used a boot source. The SoC expects the RCW at offset 4096 of the SD
card or eMMC.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/rcw-smarc-sal28: new package

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

configs/kontron_smarc_sal28: enable u-boot

Enable building of the bootloader and integrate it into the resulting
image.

Signed-off-by: Michael Walle <michael@walle.cc>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

package/{mesa3d, mesa3d-headers}: bump version to 20.3.3

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/wolfssl: security bump to version 4.6.0

- Fix CVE-2020-36177: RsaPad_PSS in wolfcrypt/src/rsa.c in wolfSSL
  before 4.6.0 has an out-of-bounds write for certain relationships
  between key size and digest size.
- Drop patch (already in version)

https://github.com/wolfSSL/wolfssl/releases/tag/v4.6.0-stable

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gkrellm: fix client build

Set X11_LIBS to avoid the following build failure:

/home/buildroot/autobuild/run/instance-1/output-1/host/bin/aarch64-linux-gnu-gcc main.o alerts.o battery.o base64.o clock.o cpu.o disk.o fs.o hostname.o inet.o mail.o mem.o net.o proc.o sensors.o uptime.o chart.o panel.o config.o gui.o krell.o plugins.o pixops.o client.o utils.o sysdeps-unix.o deprecated.o log.o winops-x11.o  -o gkrellm \
 -L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../aarch64-buildroot-linux-gnu/sysroot/usr/lib -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lharfbuzz -lfontconfig -lfreetype -Wl,--export-dynamic -lgmodule-2.0 -lglib-2.0 -lgthread-2.0 -pthread -lglib-2.0   -L/usr/X11R6/lib -lX11 -lSM -lICE  -L/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../aarch64-buildroot-linux-gnu/sysroot/usr/lib -lssl -lcrypto    -lm -Wl,-E
aarch64-linux-gnu-gcc: ERROR: unsafe header/library path used in cross-compilation: '-L/usr/X11R6/lib'

Fixes:
 - http://autobuild.buildroot.org/results/fff9a48efe3818f67a8f4b0fe3a3a605e4985b3b

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/gkrellm: fix build with NLS

Fixes:
 - http://autobuild.buildroot.org/results/98d0eda546b09e60eebbd3c3a28493f09dff7e62

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/boost: bump version to 1.75.0

* add option for new library Boost.JSON
* drop patch 0001 as it's applied upstream
* host: disable options that were added over time but never disabled for the host-build

Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/rhash: fix build with uclinux

Fixes:
 - http://autobuild.buildroot.org/results/598ca65cf0c7ecf9ceaecb75868b656570ae00d2

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/usbutils: needs gcc >= 4.9

Commit 8a26801c9fad1c7749200e22e9dfdeaeeb65f76e forgot to propagate the
gcc dependency from libusb to usbutils

Fixes:
 - http://autobuild.buildroot.org/results/ed8706a1ead398b5097b046524e710b1d3d0bb1e

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

package/at: bump to version 3.2.1

There is only one commit between version 3.2.1 and current commit
7c74fa1aece6bc6db351763dc012193d5d634b7e which updates the release file:

https://salsa.debian.org/debian/at/-/commit/6a9efb7dd2bd6a5e5249d9f29938acc639618e9c

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>

pkg-generic: host variant use git submodules if target variant does

When a package has both a target and a host variant, and uses git
submodules, and the host variant is downloaded before the target one, we
end up with the generated archive missing the submodules.

This happens in exactly one package in our tree: c-capnproto.

This issue was not caught before because after a few days, the full
sources are added to sources.buildroot.net. So when the hash check
fails, the full tarball is simply downloaded from there.

Propagate the git submodule setting from the target variant to the host
variant, unless the host variant explicitly opted-out.

Fixes:
    http://autobuild.buildroot.org/results/2de9c6c8ce83569d18cc7140ebc60d6fe1aadcbf/

Reported-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

package/minicom: use official tarball

Use official tarball (this will also have the nice side-effect of making
MINICOM_VERSION compatible with release-monitoring.org)

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/shairport-sync: bump to version 3.3.7

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/ncmpc: bump to version 0.42

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/mpd: bump to version 0.22.3

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libdrm: bump version to 2.4.104

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/meson: bump to version 0.56.2

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/wavpack: security bump to version 5.4.0

WavPack 5.4.0 contains a fix for CVE-2020-35738 wherein a specially
crafted WAV file could cause the WAVPACK command-line program to crash
with an out-of-bounds write (see issue #91).

Update hash of COPYING (update in year:
https://github.com/dbry/WavPack/commit/2ce3c069be548e82ea9c05741ace6583e549c6de)

https://github.com/dbry/WavPack/blob/5.4.0/NEWS

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

{linux, linux-headers}: bump 5.{4, 10}.x 4.{4, 9, 14, 19} series

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>