tree-scalar-evolution.c: New file.
* tree-scalar-evolution.c: New file.
* tree-scalar-evolution.h: New file.
* tree-ssa-loop-niter.c: New file.
* Makefile.in (SCEV_H): New.
(tree-scalar-evolution.o, tree-ssa-loop-niter.o): Add new files.
* cfgloop.h (struct loop): Add bounds field.
* tree-flow.h (struct tree_niter_desc): New type.
(number_of_iterations_cond, number_of_iterations_exit,
loop_niter_by_eval, find_loop_niter_by_eval,
estimate_numbers_of_iterations, can_count_iv_in_wider_type,
free_numbers_of_iterations_estimates): Declare.
* tree.h (lower_bound_in_type, upper_bound_in_type): Declare.
* params.def (PARAM_MAX_ITERATIONS_TO_TRACK): New parameter.
* doc/invoke.texi (max-iterations-to-track): Document.
From-SVN: r84340
sh.c (sh_va_arg): Initinalize lab_over.
* config/sh/sh.c (sh_va_arg): Initinalize lab_over.
* config/sh/sh.h (CONST_OK_FOR_J16): Use parentheses.
(MODE_AFTER): Add cast appropriately.
* config/sh/sh.md (movdi splitter): Likewise.
(casesi_worker_2): Add const qualifier appropriately.
(eh_return): Remove unused variable.
(insv): Initialize v;
From-SVN: r84337
mmix-protos.h (mmix_expand_builtin_va_arg): Remove.
* config/mmix/mmix-protos.h (mmix_expand_builtin_va_arg): Remove.
* config/mmix/mmix.c (TARGET_GIMPLIFY_VA_ARG_EXPR): New.
(mmix_gimplify_va_arg_expr): Rewrite from mmix_expand_builtin_va_arg.
* config/mmix/mmix.h (EXPAND_BUILTIN_VA_ARG): Remove.
(FRAME_POINTER_REQUIRED): Use current_function_has_nonlocal_label.
From-SVN: r84336
m32r-protos.h (m32r_va_arg): Remove.
* config/m32r/m32r-protos.h (m32r_va_arg): Remove.
* config/m32r/m32r.c (TARGET_GIMPLIFY_VA_ARG_EXPR): New.
(m32r_gimplify_va_arg_expr): Rewrite from m32r_va_arg.
* config/m32r/m32r.h (EXPAND_BUILTIN_VA_ARG): Remove.
From-SVN: r84335
Daily bump.
From-SVN: r84333
iq2000-protos.h (iq2000_va_arg): Remove.
* config/iq2000/iq2000-protos.h (iq2000_va_arg): Remove.
* config/iq2000/iq2000.c (TARGET_GIMPLIFY_VA_ARG_EXPR): New.
(iq2000_gimplify_va_arg_expr): Rewrite from iq2000_va_arg.
* config/iq2000/iq2000.h (EXPAND_BUILTIN_VA_ARG): Remove.
From-SVN: r84330
frv-protos.h (frv_expand_builtin_va_arg): Remove.
* config/frv/frv-protos.h (frv_expand_builtin_va_arg): Remove.
* config/frv/frv.c (TARGET_GIMPLIFY_VA_ARG_EXPR): New.
(frv_gimplify_va_arg_expr): Rewrite from frv_expand_builtin_va_arg.
* config/frv/frv.h (EXPAND_BUILTIN_VA_ARG): Remove.
From-SVN: r84329
i860-protos.h (i860_va_arg): Remove.
* config/i860/i860-protos.h (i860_va_arg): Remove.
* config/i860/i860.c (TARGET_GIMPLIFY_VA_ARG_EXPR): New.
(i860_gimplify_va_arg_expr): Rewrite from i860_va_arg.
* config/i860/i860.h (EXPAND_BUILTIN_VA_ARG): Remove.
From-SVN: r84327
f77-edit-s-out.f: Copy from g77.dg.
2004-07-09 David Billinghurst (David.Billinghurst@riotinto.com)
* gfortran.dg/g77/f77-edit-s-out.f: Copy from g77.dg. XFAIL
* gfortran.dg/g77/f77-edit-t-in.f: Likewise
* gfortran.dg/g77/f77-edit-x-out.f: Likewise
From-SVN: r84326
system.h: Prototype getpagesize if missing.
* system.h: Prototype getpagesize if missing.
* configure.ac: Add getpagesize to gcc_AC_CHECK_DECLS.
* configure: Regenerate.
* config.in: Regenerate.
From-SVN: r84323
fr30-protos.h (fr30_va_arg): Remove.
* config/fr30/fr30-protos.h (fr30_va_arg): Remove.
* config/fr30/fr30.c (TARGET_GIMPLIFY_VA_ARG_EXPR): New.
(fr30_gimplify_va_arg_expr): New.
(fr30_pass_by_reference, fr30_pass_by_value, fr30_va_arg): Remove.
* config/fr30/fr30.h (EXPAND_BUILTIN_VA_ARG): Remove.
From-SVN: r84322
cris-protos.h (cris_expand_builtin_va_arg): Remove.
* config/cris/cris-protos.h (cris_expand_builtin_va_arg): Remove.
* config/cris/cris.c (TARGET_GIMPLIFY_VA_ARG_EXPR): New.
(cris_gimplify_va_arg_expr): Rewrite from cris_expand_builtin_va_arg.
* config/cris/cris.h (EXPAND_BUILTIN_VA_ARG): Remove.
From-SVN: r84321
builtins.c (ind_gimplify_va_arg_expr): New.
* builtins.c (ind_gimplify_va_arg_expr): New.
* tree.h (ind_gimplify_va_arg_expr): Declare.
* config/arc/arc.c (arc_gimplify_va_arg_expr): Use it.
From-SVN: r84317
expmed.c (extract_bit_field): Correct condition to use vec_extract patterns also on vector elements other...
* expmed.c (extract_bit_field): Correct condition to use vec_extract
patterns also on vector elements other than the first one.
* config/i386/i386.md (vec_extractv2df, vec_extractv4sf): Add missing
break statements.
From-SVN: r84316
re PR target/16344 (libstdc++'s PCH built by profiledbootstrap does not work with the built compiler)
PR target/16344
* Makefile.tpl (profiledbootstrap): Build runtime libraries with
feedback based compiler.
* Makefile.in: Rebuilt.
From-SVN: r84315
darwin-ldouble.c: Correct reference to the Linnainmaa paper.
* config/rs6000/darwin-ldouble.c: Correct reference
to the Linnainmaa paper.
From-SVN: r84314
arc-protos.h (arc_va_arg): Remove.
* config/arc/arc-protos.h (arc_va_arg): Remove.
* config/arc/arc.c (TARGET_GIMPLIFY_VA_ARG_EXPR): New.
(arc_gimplify_va_arg_expr): Rewrite from arc_va_arg.
* config/arc/arc.h (EXPAND_BUILTIN_VA_ARG): Remove.
From-SVN: r84313
c4x-protos.h (c4x_va_arg): Remove.
* config/c4x/c4x-protos.h (c4x_va_arg): Remove.
* config/c4x/c4x.c (TARGET_GIMPLIFY_VA_ARG_EXPR): New.
(c4x_gimplify_va_arg_expr): Rewrite from c4x_va_arg.
* config/c4x/c4x.h (EXPAND_BUILTIN_VA_ARG): Remove.
From-SVN: r84311
* pa.md (prefetch_32, prefetch_64): Simplify constraint checks.
From-SVN: r84310
920428-2.x: Delete.
* gcc.c-torture/execute/920428-2.x: Delete.
* gcc.c-torture/execute/920501-7.x: Likewise.
From-SVN: r84309
c-decl.c (static_ctors, [...]): Make static.
* c-decl.c (static_ctors, static_dtors): Make static.
(pop_file_scope): Call c_common_write_pch and
cgraph_finalize_compilation_unit here.
(build_cdtor): Moved here from c-objc-common.c; simplify.
(c_write_global_declarations_1): Clarify comment.
(c_write_global_declarations): Close the external scope before
doing anything else. Call build_cdtor, cgraph_optimize, and
mudflap_finish_file here.
* c-lang.c (finish_file): Don't call c_objc_common_finish_file.
Clarify comment.
* c-objc-common.c: No need to include cgraph.h.
(build_cdtor): Moved to c-decl.c.
(c_objc_common_finish_file): Delete.
* c-tree.h: Update to match.
* objc/objc-act.c (finish_file): Don't call c_objc_common_finish_file.
(generate_static_references): Set TREE_USED before calling finish_decl.
Eliminate unnecessary dummy declaration. Call rest_of_decl_compilation
on the static_instances_decl.
From-SVN: r84307
c-decl.c (pop_scope): Do not set DECL_CONTEXT on file-scope decls when...
* c-decl.c (pop_scope): Do not set DECL_CONTEXT on file-scope
decls when there is only one input translation unit.
* langhooks.c (lhd_set_decl_assembler_name): Partially revert
change of 2004-07-05; do not treat declarations with
DECL_CONTEXT a TRANSLATION_UNIT_DECL specially.
* opts.c (cur_in_fname): Delete.
* opts.h: Likewise.
* tree.c: Revert changes of 2004-07-05; no special treatment
for TRANSLATION_UNIT_DECLs.
* Makefile.in (tree.o): Update dependencies.
From-SVN: r84306
Makefile.def (host_modules): Set bootstrap=true for flex.
* Makefile.def (host_modules): Set bootstrap=true for flex.
* Makefile.tpl (all-gcc): Depend on texinfo and flex.
* Makefile.in: Rebuilt.
From-SVN: r84305
intrinsic.c (add_sym_4s): New function.
* intrinsic.c (add_sym_4s): New function.
(add_subroutines): Change gfc_add_sym_? to gfc_add_sym_?s.
From-SVN: r84304
ANSI C conversion, libmudflap specialization, recursion limiting.
2004-07-08 Frank Ch. Eigler <fche@redhat.com>
ANSI C conversion, libmudflap specialization, recursion limiting.
* splay-tree.h (splay_tree_{de,}allocate_fn): Remove allocation_data
argument and indirection function pointers, update callers.
(splay_tree_s): Add statistics and recursion control fields
num_keys, max_depth, depth, rebalance_p.
* splay-tree.c (splay_tree_splay_helper): Track recursion depth.
Back out of search if it exceeds limit.
(splay_tree_splay): Manage recursion limiting with rebalancing as
needed.
(splay_tree_new): More initialization.
(splay_tree_rebalance): New function.
(splay_tree_foreach): Rewrite using nonrecursive logic.
(splay_tree_xmalloc_allocate, splay_tree_xmalloc_deallocate):
Remove. Point indirect calls to mf-runtime.c's routines.
(splay_tree_compare_ints, splay_tree_compare_pointers): Remove unused
functions.
(splay_tree_delete, splay_tree_delete_helper): Ditto.
* testsuite/heap-scalestress.c: New test based on one from
Eyal Lebedinsky <eyal@eyal.emu.id.au>:
From-SVN: r84303
builtins.c (fold_builtin_strcpy): Merge functionality from simplify_builtin_strcpy.
* builtins.c (fold_builtin_strcpy): Merge functionality from
simplify_builtin_strcpy. Add additional len argument. No longer
static. Remove function prototype.
(fold_builtin_strncpy): Likewise integrate functionality from
simplify_builtin_strncpy. Add additional slen argument. No
longer static. Remove function prototype.
(simplify_builtin_strcy, simplify_builtin_strncpy): Delete.
(simplify_builtin_fputs): Rename to fold_builtin_fputs. Change
types of "ignore" and "unlocked" parameters to bool.
(fold_builtin_1): Add additional ignore argument. Call renamed
fold_builtin_fputs to simplify GCC "fputs" and "fputs_unlocked"
builtins. Update arguments to fold_builtin_strncpy and
fold_builtin_strcpy. Add function prototype.
(fold_builtin): Add additional Boolean ignore argument to pass
to fold_builtin_1.
(simplify_builtin): Call fold_builtin_fputs, fold_builtin_strcpy
and fold_builtin_strncpy instead of simplify_builtin_fputs,
simplify_builtin_strcpy and simplify_builtin_strncpy respectively.
* expr.h (simplify_builtin_fputs, simplify_builtin_strcpy,
simplify_builtin_strncpy): Delete function prototypes.
* tree.h (fold_builtin_fputs, fold_builtin_strcpy,
fold_builtin_strncpy): Add function prototypes here.
(fold_builtin): Update function prototype with new "bool ignore".
* tree-ssa-ccp.c (ccp_fold): Update call to fold_builtin.
(ccp_fold_builtin): Update call to fold_builtin. Call
fold_builtin_fputs, fold_builtin_strcpy and fold_builtin_strncpy
instead of simplify_builtin_fputs, simplify_builtin_strcpy and
simplify_builtin_strncpy respectively.
* fold-const.c (fold): Update call to fold_builtin.
From-SVN: r84302
builtins.c (expand_builtin_stpcpy): Un-simplify decay of stpcpy to strcpy.
* builtins.c (expand_builtin_stpcpy): Un-simplify decay of stpcpy
to strcpy.
From-SVN: r84301
expr.h (FUNCTION_ARG_PARTIAL_NREGS): Default to 0.
* expr.h (FUNCTION_ARG_PARTIAL_NREGS): Default to 0.
(FUNCTION_ARG_PASS_BY_REFERENCE): Likewise.
(FUNCTION_ARG_CALLEE_COPIES): Likewise.
* calls.c: Remove ifdefs of macros above.
* functions.c: Likewise.
* expr.c: Likewise.
From-SVN: r84300
sparc.md (UNSPECV_GOTO_V9): Delete.
* config/sparc/sparc.md (UNSPECV_GOTO_V9): Delete.
(arch attribute): Delete.
(current_function_calls_alloca attribute): Rename into calls_alloca.
(calls_eh_return): New attribute.
(leaf_function): Likewise.
(length attribute): Fix formula for sibcalls.
(return insn): Correctly compute the 'length' attribute.
(do_builtin_setjmp_setup): Adjust use of current_function_calls_alloca.
From-SVN: r84299
tree-cfg.c (make_exit_edges): Use get_call_expr_in.
* tree-cfg.c (make_exit_edges): Use get_call_expr_in.
(remove_useless_stmts_1, is_ctrl_altering_stmt): Likewise.
(tree_block_ends_with_call_p, need_fake_edge_p): Likewise.
* tree-eh.c (lower_eh_constructs_1): Likewise.
* tree-sra.c (sra_walk_modify_expr): Likewise.
* tree-ssa-dce.c (mark_stmt_if_obviously_necessary): Likewise.
(eliminate_unnecessary_stmts): Likewise.
* tree-ssa-dse.c (dse_optimize_stmt): Likewise.
* tree-tailcall.c (optimize_tail_call): Likewise.
* tree-ssa-ccp.c (get_rhs, set_rhs): Reorg to use switch.
From-SVN: r84298
tree-ssa-operands.c (get_asm_expr_operands): Fix thinkos in the handling of clobbering ASM_EXPRs.
* tree-ssa-operands.c (get_asm_expr_operands): Fix thinkos in
the handling of clobbering ASM_EXPRs.
From-SVN: r84292
name-lookup.h (struct cp_binding_level): Update documentation for class_shadowed.
* name-lookup.h (struct cp_binding_level): Update documentation
for class_shadowed.
From-SVN: r84291
* vec.c (vec_assert_fail): Remove duplicate 'function'.
From-SVN: r84282
vec.c (vec_p_reserve, [...]): Allocation is signed.
.: * vec.c (vec_p_reserve, vec_o_reserve): Allocation is signed.
* vec.h (VEC_alloc, VEC_embedded_size, VEC_embedded_init):
Allocation is signed.
(VEC_reserve): Return flag, allocation is signed.
cp:
* name-lookup.c (push_binding): Use VEC_reserve.
From-SVN: r84281
tree-ssa-ccp.c (fold_stmt): Get type directly from OBJ_TYPE_REF_OBJECT.
* tree-ssa-ccp.c (fold_stmt): Get type directly from
OBJ_TYPE_REF_OBJECT.
From-SVN: r84280
c-common.c (c_common_nodes_and_builtins): Do not create __builtin_ptrdiff_t and __builtin_size_t.
2004-07-08 Paolo Bonzini <bonzini@gnu.org>
* c-common.c (c_common_nodes_and_builtins): Do not
create __builtin_ptrdiff_t and __builtin_size_t.
From-SVN: r84278
(TARGET_LIBGCC2_CFLAGS): Define. Set to -Os.
From-SVN: r84276
except.c (expand_eh_region_start, [...]): Remove.
* except.c (expand_eh_region_start, expand_eh_region_end,
expand_eh_handler, expand_eh_region_end_cleanup,
expand_start_all_catch, expand_start_catch, expand_end_catch,
expand_end_all_catch, expand_eh_region_end_allowed,
expand_eh_region_end_must_not_throw, expand_eh_region_end_throw,
expand_eh_region_end_fixup): Remove.
* stmt.c (struct nesting): Remove stack_level, innermost_stack_block,
cleanups, outer_cleanups, label_chain, exception_region.
(struct goto_fixup): Remove stack_level, cleanup_list_list.
(struct label_chain): Remove.
(struct stmt_status): Remove x_stack_block_stack.
(stack_block_stack, expand_goto_internal, expand_fixup, expand_fixups,
fixup_gotos, save_stack_pointer, expand_decl_cleanup,
expand_decl_cleanup_eh, expand_cleanups, start_cleanup_deferral,
end_cleanup_deferral, last_cleanup_this_contour,
containing_blocks_have_cleanups_or_stack_level,
any_pending_cleanups): Remove.
(expand_null_return_1): Take no arguments.
(expand_label, expand_naked_return, expand_return,
expand_start_bindings_and_block, expand_end_bindings, expand_decl,
expand_anon_union_decl, expand_start_case, pushcase, pushcase_range,
expand_end_case_type): Don't use any of them.
* calls.c (expand_call): Likewise.
* dojump.c (do_jump): Likewise.
* function.c (expand_function_end): Likewise.
* expr.c (store_expr, expand_expr_real_1): Likewise.
(safe_from_p): Don't handle WITH_CLEANUP_EXPR, CLEANUP_POINT_EXPR.
(expand_expr_real_1): Don't handle WITH_CLEANUP_EXPR,
CLEANUP_POINT_EXPR, TARGET_EXPR, TRY_CATCH_EXPR, CATCH_EXPR,
EH_FILTER_EXPR, TRY_FINALLY_EXPR, GOTO_SUBROUTINE_EXPR.
* fold-const.c (fold_checksum_tree): Use first_rtl_op.
* gengtype.c (adjust_field_tree_exp): Remove rtl op handling.
* gimplify.c (gimplify_cleanup_point_expr): Renumber operands
for WITH_CLEANUP_EXPR.
(gimple_push_cleanup): Likewise.
* integrate.c (copy_decl_for_inlining): Don't DECL_TOO_LATE.
* print-tree.c (print_node): Likewise.
* tree-pretty-print.c (dump_generic_node): Remove GOTO_SUBROUTINE_EXPR.
* tree.c (first_rtl_op): Always just TREE_CODE_LENGTH.
(has_cleanups): Remove GOTO_SUBROUTINE_EXPR.
* tree.def (WITH_CLEANUP_EXPR): Remove op1 and op2.
(GOTO_SUBROUTINE_EXPR): Remove.
* tree.h (WITH_CLEANUP_EXPR_RTL): Remove.
(DECL_TOO_LATE): Remove.
* except.h, tree.h: Update decls.
ada/
* trans.c (gnat_to_gnu <N_Handled_Sequence_Of_Statements>): Update
commentary.
cp/
* cp-tree.h (expand_eh_spec_block): Remove.
java/
* expr.c (case_identity, get_primitive_array_vtable,
java_expand_expr, emit_init_test_initialization): Remove.
* java-tree.h (java_expand_expr): Remove.
* lang.c (LANG_HOOKS_EXPAND_EXPR): Remove.
From-SVN: r84275
explow.c (optimize_save_area_alloca): Do not accept parameters.
2004-07-08 Paolo Bonzini <bonzini@gnu.org>
* explow.c (optimize_save_area_alloca): Do not accept parameters.
* passes.c (rest_of_handle_final): Handle symout.
(rest_of_handle_new_regalloc, rest_of_handle_old_regalloc):
Push timevar here.
(rest_of_handle_sched): Break out SMS. Remove ifs for
flag_schedule_insns and flag_modulo_sched.
(rest_of_handle_addressof, rest_of_handle_cse2): Garbage
collect at the end.
(rest_of_handle_gcse2): Put under timevar TV_RELOAD_CSE_REGS.
(rest_of_handle_partition_blocks, rest_of_handle_sms,
rest_of_handle_if_after_reload, rest_of_handle_peephole2,
rest_of_handle_mode_switching, rest_of_handle_jump,
rest_of_handle_guess_branch_prob, rest_of_handle_eh,
rest_of_handle_jump2, rest_of_handle_postreload,
rest_of_handle_flow2, rest_of_clean_state,
rest_of_handle_shorten_branches,
rest_of_handle_prologue_epilogue,
rest_of_handle_branch_target_load_optimize): New.
(rest_of_compilation): Call the above. Remove ggc_collect
calls moved to rest_of_handle_*.
* rtl.h (optimize_save_area_alloca): Do not accept parameters.
* dwarf2out.c (dwarf2out_begin_prologue): Use TREE_NOTHROW.
* except.c (set_nothrow_function_flags): Set TREE_NOTHROW.
* except.h (set_nothrow_function_flags): Update comment.
* function.c (current_function_nothrow): Remove.
* output.h (current_function_nothrow): Remove.
* passes.c (rest_of_compilation): Do not set TREE_NOTHROW.
* config/arm/arm.c (arm_compute_func_type): Use TREE_NOTHROW.
From-SVN: r84274
re PR bootstrap/16326 (Bootstrap failure after "RTL prologue/epilogue for SPARC" patch)
PR bootstrap/16326
* reorg.c: Revert 2004-06-30 change.
(find_end_label): If HAVE_epilogue and !HAVE_return,
return 0 instead of creating a label at the end of the insn chain.
(optimize_skip): Account for the failure mode of find_end_label.
(fill_simple_delay_slots): Likewise.
(fill_slots_from_thread): Likewise.
(relax_delay_slots): Likewise.
From-SVN: r84273
tree-flow.h (addressable_vars): Declare.
* tree-flow.h (addressable_vars): Declare.
* tree-ssa-alias.c (addressable_vars): Define.
(setup_pointers_and_addressables): Add addressable variables
to addressable_vars.
* tree-ssa-operands.c (get_stmt_operands): Move
handling of ASM_EXPRs ...
(get_asm_expr_operands): ... here.
When the ASM_EXPR clobbers memory, also clobber addressable
variables.
* tree-ssa.c (init_tree_ssa): Initialize addressable_vars.
(delete_tree_ssa): Reset addressable_vars.
From-SVN: r84272
varasm.c (assemble_variable): Use assemble_zeros for zero-initialized variables.
* varasm.c (assemble_variable): Use assemble_zeros for
zero-initialized variables.
(categorize_decl_for_section): Honor flag_zero_initialized_in_bss
for SECCAT_BSS and SECCAT_TBSS.
Co-Authored-By: Richard Henderson <rth@redhat.com>
From-SVN: r84271
* varasm.c (asm_output_bss): Don't declare unless BSS_SECTION_ASM_OP.
From-SVN: r84269
expmed.c (emit_store_flag): Also special-case double-word (in-)equality comparison against -1.
* expmed.c (emit_store_flag): Also special-case double-word
(in-)equality comparison against -1.
From-SVN: r84268
calls.c (emit_library_call_value_1): Use mode of function parameter rather than that of argument since constants...
* calls.c (emit_library_call_value_1): Use mode of function parameter
rather than that of argument since constants have none.
From-SVN: r84267
i386.c (ix86_gimplify_va_arg): Don't need temporary for passing arguments the containers for which are registers.
* config/i386/i386.c (ix86_gimplify_va_arg): Don't need temporary for
passing arguments the containers for which are registers.
From-SVN: r84266
re PR c++/16276 ([3.4 only] G++ generates local references to linkonce sections)
2004-07-07 H.J. Lu <hongjiu.lu@intel.com>
PR c++/16276
* g++.dg/rtti/tinfo1.C: New file.
From-SVN: r84261
cp-tree.h (saved_scope): Remove x_previous_class_type and x_previous_class_values...
* cp-tree.h (saved_scope): Remove x_previous_class_type and
x_previous_class_values; add x_previous_class_level.
(previous_class_type): Remove.
(previous_class_values): Remove.
(previous_class_level): New macro.
* class.c (pushclass): Restore the identifier cache more
expeditiously.
(invalidate_class_lookup_cache): Use vector for class_shadowed and
previous_class_values.
* decl.c (poplevel): Likewise.
* name-lookup.c (cxx_binding_init): New function.
(cxx_binding_make): Use it.
(push_binding): For a binding in a class level, use a vector of
cp_class_binding nodes.
(push_binding_level): New function.
(begin_scope): Use it.
(leave_scope): Do not put class binding levels on the free list.
(print_binding_level): Adjust for the fact that class_shadowed is
a vector.
(poplevel_class): Likewise.
(clear_identifier_class_values): Likewise.
(push_class_level_binding): Likewise.
(set_class_shadows): Remove.
(store_binding): New function.
(store_class_bindings): New function.
(push_to_top_level): Use store_class_bindings as appropriate.
(pop_from_top_level): Use previous_class_level, not
previous_class_type.
* name-lookup.h (cp_class_binding): New type.
(cp_binding_level): Use a vector object for class_shadowed.
(push_binding_level): Declare.
(set_class_shadows): Remove.
From-SVN: r84259
Introduce H8SX support.
* expr.c (expand_strcpy): Renamed and moved to...
* builtins.c (expand_movstr): ... here. Tweak.
(expand_builtin_strcpy): Adjust. Use movstr if len can't be
computed or has side effects.
(expand_builtin_stpcpy): Likewise. Use strcpy if return value is
unused, or if mempcpy fails. Adjust the return value in the
latter case. Use movstr if everything else fails.
* doc/md.texi (movstr): Document.
(movmemM, clrmemM): Fix explanation of memory block operands.
* config/h8300/h8300.md (stpcpy): Renamed to...
(movstr): ... this. Adjust.
2004-07-07 Alexandre Oliva <aoliva@redhat.com>
* config/h8300/h8300.md: Rename movstr*, except for movstrict*, to
movmem* and clrstr* to clrmem*.
2004-06-27 Alexandre Oliva <aoliva@redhat.com>
* config/h8300/h8300.c (h8300_reg_class_from_letter): Map 'D' to
GENERAL_REGS, always.
(h8300_swap_into_er6, h8300_swap_into_er6): Handle the case of
getting the stack pointer as addr.
* config/h8300/h8300.h (PREDICATE_CODES): Remove constant rtxes
from general_operand_dst.
* config/h8300/h8300.md (movmd_internal_normal): New, normal-mode
variant of...
(movmd_internal): ... this. Add modes to operands. Disparage `D'
instead of requiring it to match only before reload.
(stpcpy_internal_normal): New, normal-mode variant of...
(stpcpy_internal): ... this. Add modes to operands. Disparage
`D' instead of requiring it to match only before reload.
* config/h8300/h8300-protos.h (h8300_legitimate_address_p): Add
mode argument.
* config/h8300/h8300.h (GO_IF_LEGITIMATE_ADDRESS): Pass it to...
* config/h8300/h8300.c (h8300_legitimate_address_p): Pass it to
h8300_get_index.
* config/h8300/h8300.md (attr type): Add call.
(attr can_delay): If type is call, set it no.
(call, call_value): Set type to call.
2004-06-21 Alexandre Oliva <aoliva@redhat.com>
* config/h8300/h8300.md (logicalhi3_sn, logicalsi3_sn): New.
2004-06-16 Alexandre Oliva <aoliva@redhat.com>
* tree.c (get_narrower): Don't narrow integral types into
non-integral types.
* config/h8300/h8300.c (h8300_expand_epilogue): Initialize
frame_size *before* the first use.
* config/h8300/h8300.md (movstrictqi): Reintroduce post-increment
on input.
(peephole2): Don't widen instructions that push SP. Move
decrement of SP to the end of all stm-generating peepholes.
2003-07-24 Richard Sandiford <rsandifo@redhat.com>
* config/h8300/h8300.md (insv): Prefer to use AND to clear a bitfield
and OR to set it to all ones.
2003-07-24 Richard Sandiford <rsandifo@redhat.com>
* config/h8300/h8300.md (can_delay): Default to "no" for bit branches.
(call, call_value): Set can_delay to "no".
2003-07-22 Richard Sandiford <rsandifo@redhat.com>
* config/h8300/h8300.md (extzv): Make subreg check more robust.
2003-07-21 Richard Sandiford <rsandifo@redhat.com>
* config/h8300/h8300.md (*brabit): Remove.
* config/h8300/h8300.md (*brabc, *brabs): Remove mode from
zero_extract. Use bit_memory_operand as the predicate for
operand 1 and 'WU' as the constraint. Check the difference
between the base length and the final one when deciding which
type of branch to use.
2003-07-21 Richard Sandiford <rsandifo@redhat.com>
* config/h8300/h8300.md (extzv): Remove mode from operands 0 and 1.
Use convert_move to extend the result for TARGET_H8300SX. Check
for QImode memory references. Optimize the case where the
destination is a paradoxical subreg.
2003-07-21 Richard Sandiford <rsandifo@redhat.com>
* config/h8300/h8300.md (*movsf_h8sx): Add an r <- G alternative.
* config/h8300/h8300.md (andqi): Remove bclr from h8sx version.
2003-07-21 Richard Sandiford <rsandifo@redhat.com>
* config/h8300/h8300.md: Include mova.md
(length_table): Add mova and mova_zero.
* config/h8300/h8300.c (print_operand): Handle '%o'. Print a length
after all constant addresses for '%R', '%X', '%T' and '%S'.
(h8300_mova_length): New function.
(h8300_insn_length_from_table): Use it to handle mova and mova_zero.
* config/h8300/t-h8300 (mova.md): Generate from genmova.sh. Add to
dependencies for s-config, etc.
* config/h8300/gemova.sh: New file.
* config/h8300/mova.md: Generated.
2003-07-20 Alexandre Oliva <aoliva@redhat.com>
* config/h8300/h8300.c (h8300_bitfield_length): New.
(nibble_operand): Adjust.
(h8300_binary_length): Handle conditional binary op.
(h8300_insn_length_from_table): Handle bitfield and bitbranch.
* config/h8300/h8300.h: Change constraints W# and Y# to P#>X and
P#<X, respectively. The original P is now IP4>X. Introduced P#>0
and P#<0, unused so far. W and Y are now prefixes to multi-letter
constraints. WU is introduced as a variant of U that requires a
mem, and is therefore considered an EXTRA_MEMORY_CONSTRAINT.
* config/h8300/h8300.md (attr type): Added bitbranch.
(attr length_table): Added bitfield and bitbranch.
(attr length): Compute bitbranch length.
(andqi): Separate pattern for H8300SX. Use bfld for loading the
least-significant bit of a byte.
(brabit, brabc, brabs): New.
(insv, extzv): Emit bfst and bfld on H8300SX.
(bfld, bfst, seq, sne): New.
(bstzhireg, cmpstz, bstz, bistz): New.
(cmpcondbset, condbset, cmpcondbclr, condbclr): New.
(cmpcondbsetreg, condbsetreg, cmpcondbclrreg, condbclrreg): New.
2003-07-11 Richard Sandiford <rsandifo@redhat.com>
* config/h8300/h8300.c (h8sx_binary_memory_operator): New function.
(h8sx_unary_memory_operator): New function.
* config/h8300/h8300.h (EXTRA_MEMORY_CONSTRAINT): Disable.
(PREDICATE_CODES): Add h8sx_{unary,binary}_memory_operator.
* config/h8300/h8300.md: Add peepholes to combine reloads and
arithmetic insns.
2003-07-10 Richard Sandiford <rsandifo@redhat.com>
* config/h8300/h830.md (cmpqi): Use 'i' rather than 'n' in constraints.
(*cmphi_h8300hs, *addqi3, *addhi3_h8sx, subhi3): Likewise.
(and?i, ior?i, xor?i): Likewise.
2003-07-10 Richard Sandiford <rsandifo@redhat.com>
* config/h8300/h8300.c: Move enums and prototypes to head of file.
Various whitespace fixes.
(h8300_constant_length): New function, split out from...
(h8300_displacement_size): ...here. Rename h8300_displacement_length.
(h8300_classify_operand): Use IN_RANGE.
(h8300_classify_operand): Use h8300_constant_length.
(h8300_short_move_mem_p): Tighten size check.
(h8sx_mergeable_memrefs_p): Tighten equality check.
2003-06-30 Richard Sandiford <rsandifo@redhat.com>
* config/h8300/h8300.h (TARGET_CPU_CPP_BUILTINS): Define __H8300SX__
for -msx.
* config/h8300/crti.asm: Use .h8300sx or .h8300sxn for -msx code.
* config/h8300/crtn.asm: Likewise.
* config/h8300/lib1funcs.asm: Likewise. Use 32-bit pointers
if __H8300SX__ is defined.
2003-06-27 Richard Sandiford <rsandifo@redhat.com>
* config/h8300/h8300-protos.h (h8300_get_index): Add mode parameter.
* config/h8300/h8300.h (GO_IF_LEGITIMATE_ADDRESS): Update accordingly.
(GO_IF_MODE_DEPENDENT_ADDRESS): Treat POST_DEC, PRE_INC and indexed
addresses as mode-dependent.
* config/h8300/h8300.c (print_operand_address): Update call to
h8300_get_index.
(h8300_get_index): Take a mode argument. Rework to fix an
earlier misunderstanding.
2003-06-26 Richard Sandiford <rsandifo@redhat.com>
* config/h8300/h8300.c (zero_extendqisi2): Force the source operand
into a register if TARGET_H8300SX.
(*zero_extendqisi2_h8300hs, *extendqisi2_h8300): Disable for
TARGET_H8300SX. Also disable related define_splits.
(*zero_extendqisi2_h8sx, *extendqisi2_h8sx): New patterns.
2003-06-23 Richard Sandiford <rsandifo@redhat.com>
* config/h8300/h8300.c (h8300_rtx_costs): Add h8sx handling.
2003-06-20 Richard Sandiford <rsandifo@redhat.com>
* config/h8300/h8300.h (OK_FOR_Z): New macro.
(EXTRA_CONSTRAINT_STR): Check it.
* config/h8300/h8300.c (h8300_classify_operand): Accept null
class arguments.
(h8300_insn_length_from_table): Handle LENGTH_TABLE_MOV_IMM4.
* config/h8300/h8300.md (length_table): Add mov_imm4.
(movqi, movhi): Add Z <- W4 alternatives to h8sx patterns.
2003-06-20 Richard Sandiford <rsandifo@redhat.com>
* genattrtab.c (write_eligible_delay): Allow candidate_insn to
be a label.
* config/h8300/h8300.h (DELAY_SLOT_LENGTH): New macro.
* config/h8300/h8300.c (h8300_reorg): New function.
(TARGET_MACHINE_DEPENDENT_REORG): Define.
* config/h8300/h8300.md (length): Subtract the length of the
delay slot from (pc) when checking the range of forward branches.
(delay_slot, can_delay): New attributes.
(define_delay): Add bra/s handling.
(movmd_internal, return_h8sx, *return_1): Set can_delay to no.
(jump): Add delayed-branch handling.
2003-06-17 Richard Sandiford <rsandifo@redhat.com>
* expr.c (expand_strcpy): New function.
* builtins.c (expand_builtin_strcpy): Fall back on expand_strcpy.
(expand_builtin_stpcpy): Likewise.
* config/h8300/h8300-protos.h (h8sx_split_movmd): Remove.
(h8300_swap_into_er6, h8300_swap_out_of_er6): Declare.
* config/h8300/h8300.c (h8300_reg_class_from_letter): Tweak 'd'
handling to improve register allocation for -fno-omit-frame-pointer.
(h8sx_split_movmd): Delete, moving er6 handling into...
(h8300_swap_into_er6, h8300_swap_out_of_er6): ...these new functions.
* config/h8300/h8300.md (UNSPEC_STPCPY): New unspec constant.
(movmd): Add calls to copy_rtx.
(movmd_internal): In the second alternative, allow the initial and
final destination registers to be different . Update the splitter
accordingly. Call h8300_swap_into_er6 and h8300_swap_out_of_er6
instead of h8sx_split_movmd.
(stpcpy, movsd): New expanders.
(movsd_internal): New define_insn.
2003-06-13 Richard Sandiford <rsandifo@redhat.com>
* config/h8300/h8300-protos.h (h8300_reg_class_from_letter): Declare.
(h8sx_emit_movmd, h8sx_split_movmd): Declare.
* config/h8300/h8300.h (reg_class): Add COUNTER_REGS, SOURCE_REGS
and DESTINATION_REGS.
(REG_CLASS_NAMES, REG_CLASS_CONTENTS): Update accordingly.
(REGNO_REG_CLASS): Map er4, er5 and er6 to the new classes.
(REG_CLASS_FROM_LETTER): Use h8300_reg_class_from_letter.
(h8300_move_ratio): Declare.
(MOVE_RATIO): Use it.
* config/h8300/h8300.c (h8300_move_ratio): New variable.
(h8300_init_once): Initialize it.
(h8300_reg_class_from_letter): New function.
(print_operand): Add an 'm' prefix for printing ".b", ".w" or ".l".
(h8sx_emit_movmd, h8sx_split_movmd): New functions.
* config/h8300/h8300.md (UNSPEC_MOVMD): New unspec constant.
(COUNTER_REG, SOURCE_REG, DESTINATION_REG): New register constants.
(movstrsi, movmd): New expanders.
(movmd_internal): New insn.
2003-06-06 Richard Sandiford <rsandifo@redhat.com>
* config/h8300/h8300.h (EXTRA_MEMORY_CONSTRAINT): Define.
2003-06-04 Richard Sandiford <rsandifo@redhat.com>
* config/h8300/elf.h (LINK_SPEC): Use -m h8300sxnelf for -msx -mn.
* config/h8300/h8300.c (asm_file_start): Use .h8300sxn likewise.
2003-06-03 Richard Sandiford <rsandifo@redhat.com>
* config/h8300/h8300.c (nibble_operand): Fix warning.
* config/h8300/h8300.md (movstricthi): Set adjust_length to no.
(movsi_h8sx): Likewise here and the normal h8sx movhi pattern.
(movsf_h8300h): Disable for TARGET_H8300SX.
2003-06-03 Richard Sandiford <rsandifo@redhat.com>
* config/h8300/h8300.h (PREDICATE_CODES): Add h8300_ldm_parallel,
h8300_stm_parallel and h8300_return_parallel.
* config/h8300/h8300.c (h8300_push_pop, h8300_stack_offset_p,
h8300_ldm_stm_regno, h8300_ldm_stm_parallel, h8300_ldm_parallel,
h8300_stm_parallel, h8300_return_parallel): New functions.
(h8300_expand_prologue): Don't enforce ldm/stm register alignment
if TARGET_H8300SX. Use h8300_push_pop.
(h8300_expand_epilogue): Likewise. Try to merge the return insn
and final pop when generating h8sx code. Always emit some form
of return insn.
* config/h8300/h8300.md: Don't enforce register alignment in
stm peepholes if TARGET_H8300SX.
(ldm_h8300s, stm_h8300s, return_h8sx): New patterns.
(ldm_h8300s_[234], stm_h8300_[234]): Disable.
(epilogue): Expect h8300_expand_epilogue to emit a return insn.
2003-06-03 Richard Sandiford <rsandifo@redhat.com>
* config/h8300/t-h8300 (MULTILIB_OPTIONS): Add a -msx multilib.
(MULTILIB_DIRNAMES): Add a directory for it.
(MULTILIB_MATCHES): Delete.
2003-05-28 Richard Sandiford <rsandifo@redhat.com>
* final.c (walk_alter_subreg): Handle addresses with subregs
inside a ZERO_EXTEND or AND.
* config/h8300/h8300-protos.h (h8300_get_index): Declare.
* config/h8300/h8300.h (INDEX_REG_CLASS): Set to GENERAL_REGS
if TARGET_H8300SX.
(GO_IF_LEGITIMATE_ADDRESS): Use h8300_get_index.
* config/h8300/h8300.c (print_operand_address): Handle @(dd,RnL.b),
@(dd,Rn.w) and @(dd,ERn.L).
(h8300_displacement_size): Take the whole address as argument.
(h8300_classify_operand, h8300_short_move_mem_p): Adjust accordingly.
2003-05-28 Richard Sandiford <rsandifo@redhat.com>
* config/mips/mips-protos.h (h8300_operands_match_p): Declare.
(h8sx_mergeable_memrefs_p): Declare.
* config/h8300/h8300.h (HAVE_POST_DECREMENT): Define to TARGET_H8300SX.
(HAVE_PRE_INCREMENT): Likewise.
(GO_IF_LEGITIMATE_ADDRESS): Accept pre/post increment/decrement
addresses for TARGET_H8300SX,
* config/h8300/h8300.c (print_operand_address): Deal with PRE_INC
and POST_DEC.
(movb_length_table, movl_length_table): New tables.
(movw_length_table): Define to movb_length_table.
(h8300_displacement_size): New, split out from...
(h8300_classify_address): ...here. Handle pre/post inc/dec.
(h8300_short_immediate_length): Allow H8OP_MEM_COMPLEX operands.
(h8300_insn_length_from_table): Add cases for movb, movw and movl.
(h8sx_mergeable_memrefs_p, h8300_operands_match_p): New functions.
(output_plussi): Use add.l #xx:3,Rn and sub.l #xx:3,Rn for h8sx.
(compute_plussi_length, compute_plussi_cc): Update accordingly.
(h8sx_unary_shift_operator): Get the mode from the operator.
(binary_shift_operator): Likewise.
* config/h8300/h8300.md: If a peephole2 applies gen_lowpart to
a memory reference, check whether the reference is offsettable.
(length_table): Add movb, movw and movl.
(movqi): Add new h8sx pattern. Don't force one operand to be a
register when generating h8sx code.
(movhi, movsi, movsf): Likewise.
(movstrictqi): Use the length_table attribute.
(movstricthi): Likewise. Add h8sx alternative for mov.w #xx:3,Rn.
(addqi3): Split into a define_expand and define_insn. Don't accept
memory operands in the expander. Use h8300_operands_match_p to
check for matching operands in the define_insn.
(subqi3, negqi2, one_cmplqi2): Likewise.
(add[hs]i3): Don't accept memory operands in the expander. Likewise
in any patterns that are unused in h8sx code. In the h8sx patterns,
use h8300_operands_match_p to check whether operands match.
(sub[hs]i3, and[hi]3, ior[hs]i3, xor[hs]i3, neg[hsi]3,
one_cmpl[hs]i3): Likewise.
(andqi3, iorqi3, xorqi3): Likewise. Don't call fix_bit_operand
in the expander.
2003-05-23 Richard Sandiford <rsandifo@redhat.com>
* config/h8300/h8300-protos.h (expand_a_shift): Return a bool.
(h8300_insn_length_from_table): Add a second parameter.
(output_h8sx_shift): Declare.
* config/h8300/h8300.h (OK_FOR_W, OK_FOR_Y): New macros.
(EXTRA_CONSTRAINT): Replace with...
(EXTRA_CONSTRAINT_STR): ...this. Use OK_FOR_W and OK_FOR_Y.
(CONSTRAINT_LEN): Define, returning 2 for 'W' and 'Y'.
(PREDICATE_CODES): Add entries for h8sx_unary_shift_operator
and h8sx_binary_shift_operator.
* config/h8300/h8300.c (two_insn_adds_subs_operand): Return false
for TARGET_H8300SX.
(bit_operand): Replace use of EXTRA_CONSTRAINT with OK_FOR_U.
(bit_memory_operand, fix_bit_operand): Likewise.
(h8300_length_table_for_insn): Remove.
(h8300_classify_operand): Fix check for 16-bit operands in 32-bit
instructions.
(h8300_short_immediate_length, h8300_binary_length): New functions.
(h8300_insn_length_from_table): Add an opcodes parameter. Rework.
(output_plussi): Use sub to add negative constants.
(compute_plussi_length): Adjust accordingly.
(h8sx_single_shift_type): New enum.
(h8sx_single_shift, h8sx_unary_shift_operator,
h8sx_binary_shift_operator, output_h8sx_shift): New functions.
(expand_a_shift, expand_a_rotate): Emit nothing if the shift is a
single h8sx instruction. Return false in this case.
* config/h8300/h8300.md (length_table): Add short_immediate.
(length): Pass the operand array to h8300_insn_length_from_table.
(adjust_length): Assume "no" for insns with a length_table attribute.
(*cmphi_h8300hs, cmpsi): Add alternatives for #xx:3.
(*addhi3_h8300hs): Don't use for h8sx.
(*addhi3_h8sx): New pattern, with alternatives for add.w #xx:3
and sub.w #xx:3.
(ashl[qhs]i3, lshr[qhs]i3, ashr[qhs]i3, rotl[qhs]i3): Change operand
1's predicate to nonimmediate_operand. Only skip default expansion
if expand_a_shift or expand_a_rotate returns true. Add new patterns
for single h8sx shift instructions.
2003-05-22 Alexandre Oliva <aoliva@redhat.com>
* config/h8300/h8300.c (nibble_operand): Split out of...
(reg_or_nibble_operand): ... this.
* config/h8300/h8300.h (PREDICATE_CODES): Added nibble_operand.
* config/h8300/h8300.md: (mulqihi3, mulhisi3, umulqihi3,
umulhisi3): Introduce expand, and introduce separate insns for
sign- or zero-extended REG and already-extended CONST_INT.
2003-05-20 Richard Sandiford <rsandifo@redhat.com>
* config/h8300/h8300.c (h8300_unary_length): Fix miscounting.
* config/h8300/h8300.md (subqi3): Generalize for h8sx.
(subhi3): Likewise. Don't accept immediates for operand 1.
Remove the early clobber from second alternative of the h8300s pattern.
(subsi3): Generalize for h8sx. Force operand 2 into a register
on plain h8300 targets.
(subsi3_h8300): Use h8300_dst_operand for consistency with expander.
(subsi3_h8300h): Generalize for h8sx.
(one_cmplqi2, one_cmplhi2, one_cmplsi2): Likewise.
2003-05-19 Alexandre Oliva <aoliva@redhat.com>
* config/h8300/h8300.c (reg_or_nibble_operand): New.
* config/h8300/h8300.h (PREDICATE_CODES): Adjust.
(TARGET_H8300SXMUL): New.
(CONST_OK_FOR_P): New.
(CONST_OK_FOR_LETTER_P): Adjust.
* config/h8300/h8300.md (mulqihi3, mulhisi3, umulqihi3,
umulhisi3): Accept 4-bit immediate on H8SX.
(mulhi3, mulsi3, smulsi3_highpart, umulsi3_highpart): New.
(udivsi3, divhi3, udivsi3, divsi3): New.
2003-05-19 Richard Sandiford <rsandifo@redhat.com>
* config/h8300/h8300-protos.h (h8300_insn_length_from_table): Declare.
* config/h8300/h8300.h (OK_FOR_Q): New macro.
(EXTRA_CONSTRAINT): Use it to check the 'Q' constraint.
(PREDICATE_CODES): Add h8300_src_operand and h8300_dst_operand.
Add ADDRESSOF to the bit_operand entry.
* config/h8300/h8300.c (h8300_dst_operand): New predicate.
(h8300_src_operand): Likewise.
(bit_operand): Check nonimmediate_operand rather than general_operand.
Accept any nonimmediate_operand in h8sx code.
(h8300_and_costs): Initialize operands[1].
(h8300_rtx_costs) <AND>: Return false if the operands aren't valid.
(h8300_operand_class): New enum.
(h8300_length_table): New typedef.
(addb_length_table, addw_length_table, addl_length_table,
logicl_length_table): New tables.
(logicb_length_table, logicw_length_table): New macros.
(h8300_classify_operand, h8300_length_from_table,
h8300_length_table_for_insn, h8300_unary_length,
h8300_insn_length_from_table): New functions.
(output_plussi): Only use adds and subs for register destinations.
Disable redundant clause.
(compute_plussi_cc): Likewise.
(compute_plussi_length): Likewise. Use h8300_length_from_table
to work out the length of an insn.
(output_logical_op): Only use narrower immediate instructions
if the destination is a register.
(compute_logical_op_cc): Likewise.
(compute_logical_op_length): Likewise. Use h8300_length_from_table.
(h8300_adjust_insn_length): Tighten check for reg<->mem moves.
* config/h8300/h8300.md (length_table): New attribute.
(length): When an instruction has a length_table attribute, use
h8300_insn_length_from_table to calculate its default length.
(cmpqi): Use h8300_dst_operand for the first operand and
h8300_src_operand for the second.
(cmphi, *cmphi_h8300hs, cmpsi, negqi2, neghi2, neghi2_h8300h, negsi2,
negsi2_h8300h, addqi3, addhi3, *addhi3_h8300, *addhi3_h8300hs, addsi3,
addsi_h8300, addsi_h8300h, andhi3, andsi3, iorhi3,
iorsi3, xorhi3, xorsi3): Likewise.
(andqi3): Use h8300_src_operand for operand 2. Adjust the condition
so that it allows any combination of operands for TARGET_H8300SX.
(iorqi3, xorqi3): Likewise.
(cmpqi): Use the length_table attribute.
(*cmphi_h8300hs, cmpsi, addqi, *addhi3_h8300hs, andqi3, iorqi3,
xorqi3, negqi2, neghi2_h8300h, negsi2_h8300h): Likewise.
(cmpqi): Add 'Q' constraint.
(*cmphi_h8300hs, cmpsi, addqi, *addhi3_h8300hs, addsi_h8300h, andqi3,
iorqi3, xorqi3, negqi2, neghi2_h8300h, negsi2_h8300h): Likewise.
2003-05-14 Richard Sandiford <rsandifo@redhat.com>
* config/h8300/h8300.h (MASK_H8300SX): New macro.
(TARGET_H8300S): True for both -ms and -msx.
(TARGET_H8300SX): New macro.
(TARGET_SWITCHES): Add entries for -msx and -mno-sx.
* config/h8300/h8300.c (asm_file_start): Write .h8300sx for -msx.
* config/h8300/elf.h (LINK_SPEC): Use -m h8300sxelf for -msx.
* config/h8300/t-h8300 (MULTILIB_MATCHES): Use -ms multilibs for -msx.
[Temporary change.]
2003-02-28 Alexandre Oliva <aoliva@redhat.com>
* config/h8300/h8300.h (SIZE_TYPE, PTRDIFF_TYPE): Use short with
16-bit pointers and 32-bit ints.
* config/h8300/h8300.h (LEGITIMATE_CONSTANT_P): Accept
CONST_DOUBLE with mode no wider than SImode.
* config/h8300/h8300.md (extendqisi2_h8300): Add constraints for
output operand.
2003-02-27 Alexandre Oliva <aoliva@redhat.com>
* config/h8300/h8300.c (general_operand_src): Match CONSTANT_P_RTX
or SUBREG thereof.
* config/h8300/h8300.h (PREDICATE_CODES): Adjust.
2003-02-22 Alexandre Oliva <aoliva@redhat.com>
* config/h8300/h8300.c (dosize): Truncate sign * size to Pmode.
From-SVN: r84257
class.c (build_static_field_ref): Add a NOP_EXPR; otherwise we get internal error due to mismatched types.
* class.c (build_static_field_ref): Add a NOP_EXPR; otherwise we
get internal error due to mismatched types.
From-SVN: r84256
* config.gcc (i[34567]86-*-mingw32*): Enable threads by default.
From-SVN: r84255
* flow.c (attempt_auto_inc): Remove now-redundant PUT_CODE.
From-SVN: r84254
* engine/util.c (vfail): Remove unnecessary sync, fsync, and fflush.
From-SVN: r84253
* gcj.texi (Linking): New node. Document -lgij usage.
From-SVN: r84252
* Makefile.am: Add rules to build libgij from just gij.cc.
From-SVN: r84251
* gcj.texi (Invoking gij): Document new -verbose:class flag.
From-SVN: r84250
Daily bump.
From-SVN: r84248
darwin.h (ASM_OUTPUT_LABELREF): Fix -fno-leading-underscore.
* darwin.h (ASM_OUTPUT_LABELREF): Fix -fno-leading-underscore.
* darwin.c (machopic_non_lazy_ptr_name, machopic_stub_name)
(machopic_finish): Likewise.
From-SVN: r84245
tree-ssa-dom.c (simplify_switch_and_lookup_avail_expr): Look through any value-preserving cast.
* tree-ssa-dom.c (simplify_switch_and_lookup_avail_expr): Look
through any value-preserving cast.
From-SVN: r84244
function.c (assign_parm_find_data_types): Call FUNCTION_ARG_PASS_BY_REFERENCE only if it's defined.
* function.c (assign_parm_find_data_types): Call
FUNCTION_ARG_PASS_BY_REFERENCE only if it's defined.
From-SVN: r84241
abi.html: Updates for 3.4.1 release.
2004-07-07 Benjamin Kosnik <bkoz@redhat.com>
* docs/html/abi.html: Updates for 3.4.1 release. Add summary of
-Weffc++ issues.
From-SVN: r84240
tree-cfg (group_case_labels): Remove case labels that have the same target as the default case.
* tree-cfg (group_case_labels): Remove case labels that have the
same target as the default case.
From-SVN: r84239
tree-inline.c (optimize_inline_calls): Set DECL_INLINED_FNS regardless of DECL_LANG_SPECIFIC being present or not.
* tree-inline.c (optimize_inline_calls): Set DECL_INLINED_FNS
regardless of DECL_LANG_SPECIFIC being present or not.
* tree.h (DECL_NUM_STMTS): Purge.
From-SVN: r84237
* g++.dg/init/call1.C: XFAIL.
From-SVN: r84234
ifcvt.c (total_bb_rtx_cost): New function.
* ifcvt.c (total_bb_rtx_cost): New function.
(find_if_case_1): Compare rtx_cost of basic block to cost of
BRANCH_COST insns.
(find_if_case_2): Same.
From-SVN: r84233
expr.c (expand_expr_real_1): Fix formating.
* expr.c (expand_expr_real_1): Fix formating.
BUFFER_REF and IN_EXPR are dead.
* fold-const.c (non_lvalue): BUFFER_REF is dead.
* tree-inline.c (estimate_num_insns_1): Likewise.
* tree-pretty-print.c (dump_generic_node): BUFFER_REF,
IN_EXPR, SET_LE_EXPR, and CARD_EXPR are dead.
* tree.def (BUFFER_REF, IN_EXPR, SET_LE_EXPR, CARD_EXPR): Kill.
cp/ChangeLog:
* class.c (instantiate_type): BUFFER_REF is dead.
* lex.c (init_operators): IN_EXPR is dead.
From-SVN: r84230
* MAINTAINERS: Add self as a profile feedback maintainer.
From-SVN: r84228
collect2.c (dump_file): Don't call cplus_demangle if HAVE_LD_DEMANGLE is defined.
2004-07-07 H.J. Lu <hongjiu.lu@intel.com>
* collect2.c (dump_file): Don't call cplus_demangle if
HAVE_LD_DEMANGLE is defined.
(main): Pass "--demangle" to ld if no_demangle is not 0 and
HAVE_LD_DEMANGLE is defined. Don't set current_demangling_style
if HAVE_LD_DEMANGLE is defined.
* configure.ac (--with-demangler-in-ld): Added
(HAVE_LD_DEMANGLE): Define if ld supports --demangle when
--with-demangler-in-ld is used.
* config.in: Regenerated.
* configure: Likewise.
From-SVN: r84227
rs6000.c (struct processor_costs): Add new fields for simple floating point operations "fp"...
* config/rs6000/rs6000.c (struct processor_costs): Add new fields
for simple floating point operations "fp", double precision
multiplication "dmul", and single and double precision division
"sdiv" and "ddiv". Update all CPU variant tables as appropriate.
(ppc630_cost): New table split from ppc620_cost, to distinguish
differences in floating point latencies.
(rs6000_override_options): Use ppc630_cost for PROCESSOR_PPC630.
(rs6000_rtx_costs): Add support for single and double precision
floating point addition, subtraction, multiplication, division,
fused-multiply-add, fused-multiply-sub, negation, absolute value
and negative absolute value. Tweak MEM case to use prefered idiom.
From-SVN: r84226
tree-flow-inline.h (may_propagate_copy): Move...
* tree-flow-inline.h (may_propagate_copy): Move...
* tree-ssa-copy.c (may_propagate_copy): ... here. Fail if we
attempt to copy between types requiring conversion.
* tree-flow.h (may_propagate_copy): Update decl.
* tree-ssa-dom.c (cprop_operand): Tidy redundant tests.
From-SVN: r84225
i386.c (override_options): Don't set x86_prefetch_sse from -mtune= option.
* config/i386/i386.c (override_options): Don't set x86_prefetch_sse
from -mtune= option.
From-SVN: r84223
builtins.c: Rename movstr*, except for movstrict*, to movmem* and clrstr* to clrmem*.
gcc/ChangeLog:
* builtins.c: Rename movstr*, except for movstrict*, to
movmem* and clrstr* to clrmem*.
* expr.c: Likewise.
* expr.h: Likewise.
* genopinit.c: Likewise.
* integrate.c: Likewise.
* local-alloc.c: Likewise.
* optabs.c: Likewise.
* optabs.h: Likewise.
* config/alpha/alpha.h: Likewise.
* config/alpha/alpha.md: Likewise.
* config/arm/arm-protos.h: Likewise.
* config/arm/arm.c: Likewise.
* config/arm/arm.md: Likewise.
* config/avr/avr.md: Likewise.
* config/c4x/c4x.c: Likewise.
* config/c4x/c4x.md: Likewise.
* config/frv/frv.md: Likewise.
* config/i386/i386-protos.h: Likewise.
* config/i386/i386.c: Likewise.
* config/i386/i386.h: Likewise.
* config/i386/i386.md: Likewise.
* config/i860/i860.c: Likewise.
* config/i860/i860.md: Likewise.
* config/ip2k/ip2k.md: Likewise.
* config/ip2k/libgcc.S: Likewise.
* config/ip2k/t-ip2k: Likewise.
* config/m32r/m32r.c: Likewise.
* config/m32r/m32r.md: Likewise.
* config/mcore/mcore.md: Likewise.
* config/mips/mips.c: Likewise.
* config/mips/mips.md: Likewise.
* config/ns32k/ns32k.c: Likewise.
* config/ns32k/ns32k.h: Likewise.
* config/ns32k/ns32k.md: Likewise.
* config/pa/pa.c: Likewise.
* config/pa/pa.md: Likewise.
* config/pdp11/pdp11.h: Likewise.
* config/pdp11/pdp11.md: Likewise.
* config/rs6000/rs6000.c: Likewise.
* config/rs6000/rs6000.md: Likewise.
* config/s390/s390-protos.h: Likewise.
* config/s390/s390.c: Likewise.
* config/s390/s390.md: Likewise.
* config/sh/lib1funcs.asm: Likewise.
* config/sh/sh.c: Likewise.
* config/sh/sh.md: Likewise.
* config/sh/t-sh: Likewise.
* config/sparc/sparc.h: Likewise.
* config/vax/vax.md: Likewise.
* config/xtensa/xtensa.c: Likewise.
* config/xtensa/xtensa.md: Likewise.
* doc/invoke.texi: Likewise.
* doc/md.texi: Likewise.
* doc/rtl.texi: Likewise.
gcc/testsuite/ChangeLog:
* gcc.c-torture/execute/builtins/mempcpy-2.c: Rename movstr*,
except for movstrict*, to movmem* and clrstr* to clrmem*.
From-SVN: r84222
re PR c++/16276 ([3.4 only] G++ generates local references to linkonce sections)
2004-07-07 H.J. Lu <hongjiu.lu@intel.com>
PR c++/16276
* rtti.c (emit_tinfo_decl): Turn off DECL_ONE_ONLY if typeinfo
is not public.
From-SVN: r84215
projects / gcc.git / log