libarchive: add hash and enable lzma support

Add libarchive hash. Enable lzma support.
Both xz and lzma support are provided by the xz library.

[Thomas: explicitly pass --with-lzma when xz is available.]

Signed-off-by: Nimai Mahajan <nimaim@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/opencv: add openmp support

Note that this situation is not ideal because it only add openmp support
to the Buildroot toolchain, not the external ones; but a couple of
packages already are in this situation.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/opencv: add python support

opencv_python module needs python-numpy because it uses some numpy
headers in this wrapper.

>From its 2.4 release, OpenCV offers python bindings, but they required
most of the OpenCV modules to be enabled.

Since OpenCV-3.0.0, python bindings have been reworked:
- it now supports both python2 and python3
- only built modules supporting wrapped in python will be included in
  the bindings.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/opencv: disable all modules by default

This change allows to reduce the size of the default OpenCV package, so
the final root filesystem.

However, this will break any existing defconfig enabling OpenCV. Indeed,
a minimal OpenCV  package will be built, whereas, prior to applying this
patches, a full-featured one would have been built instead.

Cc: "Yann E. Morin" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/opencv: reduce modules on by default

Since its integration into Buildroot, OpenCV always enables all modules
by default because the inter-module denpedency were not supported.

Now that OpenCV inter-module dependencies are correctly set at the
Buildroot configuration level, it is possible to reduce the enabled
module list to its minimal set, letting kconfig enable the other
modules.

This change will not change anything WRT a defconfig build with opencv.

Cc: "Yann E. Morin" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/opencv: reword modules' prompt and help text

This patch is mostly cosmetic changes improving the human interface.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/opencv: define modules inter-dependencies

OpenCV allows to enable/disable the selection of modules (a.k.a.
opencv libraries). These modules depend one on the others; these
dependencies are already handled by the build-system (CMake).

However, the way we handled them in Buildroot was not really clean.
For each opencv module, there is a kconfig option, but we forced the
corresponding CMake config option without checking for the modules'
dependencies.

This patch replicates the modules' dependency relations in the
Config.in, so that the selection of the user will actually be built.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/gstreamer1/gst1-plugins-bad: disable opencv plugin with opencv-3

The opencv plugin uses stuff from the now removed opencv's legacy module.
Note that the configure script already correctly check the opencv version
and disable the opencv plugin with opencv-3.x.

Also remove 'select ...' to prevent kconfig from complaining about
recursive dependencies.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/opencv: bump to version 3.0

This major version bump is in fact a bump from 2.4.10 to 2.4.11, then to
3.0.

OpenCV-2.4.11 improves a lot the Buildroot integration, including a
couple of patches that are no longer needed:
- x86 PIC code compilation fix in core module [1];
- return type fix in superes module [2];
- opencv.pc generation [3].

It also improves the gstreamer-0.10/1.x detection [4], that will be
needed in a follow-up patch.

OpenCV-3.0 still requires 2 patches (backported from upstream fixing
pthread support [5,6].

The OpenCV-3.0 does some major changes, for which a transition guide
has been published [7].

Among these changes coming with OpenCV-3.0, some new modules have been
introduced and others got removed; leading to a bunch of configure
option updates (to keep as much as possible an iso-functional-perimeter)
and the legacy menu has been updated too.
The worth noticing removals being:
- the opencv_legacy and opencv_nonfree modules no longer exist;
- the opencv_contrib module has moved out of the opencv base tree and
  now has its own repository [8].
  There is currently no plan to support it.

Some 3rd-party supports have been improved or added; their integrations
in Buildroot will be addressed in follow-up patches.

[1] https://github.com/Itseez/opencv/commit/ea50be0529c248961e1b66293f8a9e4b807294a6
[2] https://github.com/Itseez/opencv/commit/2e393ab83362743ba1825ad4b31d4a2925c606b4
[3] https://github.com/Itseez/opencv/commit/eceada586bbf18fc267e437522ec4f1f23ddc656
[4] https://github.com/Itseez/opencv/commit/38bb0db9dbec08666c8a64b3e4ead8fadf15c980
[5] https://github.com/Itseez/opencv/commit/1f983ec39c97298b0c8ce409a1cc229ecf14e55c
[6] https://github.com/Itseez/opencv/commit/a482dcce464acbd5368fb93c6c3d52ba8401776a
[7] http://docs.opencv.org/master/db/dfa/tutorial_transition_guide.html
[8] https://github.com/itseez/opencv_contrib

[Thomas:
  - address most contents made by Yann E. Morin on the Config.in file.]

Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/opencv: alphabetically sorted each _CONF_OPTS group

No new option added nor removed.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libucl: new package

Libucl is a high performance and flexible JSON/YAML/etc. parser for C.

https://github.com/vstakhov/libucl

[Thomas:
  - remove hash file, should not be used for github downloads
  - rewrap Config.in help text
  - remove trailing white space in Config.in.
  - add missing host-pkgconf dependency, without which the package
    doesn't autoreconf properly.
  - fix license: it is BSD-2c, not just BSD.]

Signed-off-by: Nimai Mahajan <nimaim@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

orc: bump version

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

heimdal: bump to version 1.6rc2

Helps drop some patches and hence autoreconf saving time.
Also allows parallel builds.

And fixes:
http://buildroot-busybox.2317881.n4.nabble.com/PATCH-v2-heimdal-explicitly-set-lpthread-td99422.html
without the need to hardcode libraries (disables/withouts weren't enough
though i've added them anyway for correctness).

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ipset: bump to version 6.25.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dosfstools: bump to version 3.0.28

Change to new homepage since maintainer changed as well.
Add hash file based on tarball signature file.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

openswan: bump to version 2.6.43

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mpd-mpc: bump to version 0.27

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mpd: bump to version 0.19.10

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

collectd: bump to version 5.5.0

Lots of new plugins!

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libconfig: bump to 1.5

Add hash file.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

rrdtool: add hash

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

system/device_table.txt: drop unused ifupdown post-up.d / pre-down.d directories

These are not used by the busybox or Debian ifupdown implementation. Instead
if-up.d is run after the per-interface up tasks (E.G. post-up) and
if-down.d is run before the per-interface down tasks (E.G. pre-down).

So drop them as they only cause confusion.

grep execute_all output/build/busybox-1.23.2/networking/ifupdown.c
static int execute_all(struct interface_defn_t *ifd, const char *opt)
        if (!execute_all(iface, "pre-up")) return 0;
        if (!execute_all(iface, "up")) return 0;
        if (!execute_all(iface, "down")) return 0;
        if (!execute_all(iface, "post-down")) return 0;

grep execute_script output/build/ifupdown-0.7.49/execute.c
int execute_scripts(interface_defn * ifd, execfn * exec, char *opt)
    if (!execute_scripts(iface, doit, "pre-up"))
    if (!execute_scripts(iface, doit, "up"))
    if (!execute_scripts(iface, doit, "down"))
    if (!execute_scripts(iface, doit, "post-down"))

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

x264: bump to version 20150223-2245-stable

Use the Git repository instead of the snapshots,
since they are not generated anymore.

Signed-off-by: David du Colombier <0intro@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ulogd: bump to version 2.0.5

Remove kernel headers check since it now implements local definitions to
keep working with newer versions.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Makefile: Don't export VERBOSE unless V=1 (for CMake)

CMake verbose mode is based on VERBOSE environment variable.
* If VERBOSE is exported but empty, only "Dependee ... is newer than
depender ..." messages are shown.
* If VERBOSE is exported and set (whatever the value), all compilation
commands are shown.

VERBOSE is currently systematically exported by Buildroot, even if it
is empty, in the root Makefile, which implies that the "light" verbose
mode - with "Dependee ... is newer than depender ..." messages - is
always enabled.

VERBOSE should only be exported when V=1, which is the standard way to
enable verbose mode in Buildroot.

Signed-off-by: Cédric Marie <cedric.marie@openmailbox.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gcc: bump 4.8.x version

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gpsd: fix build with musl

Add a patch adding missing include.

Fixes:
http://autobuild.buildroot.net/results/493/493ddaf63f41918d718b5c26e2db258c67dba0a6/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

uclibc: add libgcc_s_resume fix

This commit adds a fix for building uClibc 0.9.33.2 and uClibc-ng
1.0.3 with gcc 5.1 on ARM, since we're about to add support for gcc
5.1.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sudo: add optional pam support

Configure the sudo utility to support PAM if the framework is enabled.

[Peter: use install -D, reword commit message]
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pinentry: add patch to fix ncursesw include path

Upstream pinentry seems to assume a fixed include path for ncursesw,
while still using pkg-config to check what that path should be.
This results in detecting the library during config failing to include
it correctly during build.

Fixes:
  http://autobuild.buildroot.org/results/d8d/d8d33efd16cc94dc9d9d4b2d7615a0abb5752ee4/
  http://autobuild.buildroot.org/results/c48/c4805785077e955c61f246d0e4d8416d8dbd10b1/
  http://autobuild.buildroot.org/results/144/14483d35ab5009e854c7ce86e26942fdefd5c1f0
and bunch of others.

Signed-off-by: Gergely Imreh <imrehg@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libnspr: needs dynamic library support

The only package selecting libnspr (libnss) requires dynamic library already.

Fixes:
http://autobuild.buildroot.net/results/296/296bc0fd888a43700d2ea020f8486932c5d37760/
http://autobuild.buildroot.net/results/a65/a65588aa91a87f9a3d8af2a485de2df3e30cfc19/

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 3.{10, 14}.x and 4.0.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/perl: Fix typos in HOSTCC specification

Signed-off-by: Albert Lee <trisk@omniti.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain-buildroot: mark eglibc as deprecated

eglibc is a dead project and has not been making any release since a
while, now that glibc is back and kicking. So let's deprecated our
eglibc support.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gdb: bump 7.9 series to 7.9.1

Note that both gdb 7.9 and 7.9.1 fail to build in a chroot without
texinfo, due to the infamous makeinfo issue. This should be fixed
separately.

[Peter: fixup white space]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gcc: switch to gcc 4.9 as the default version

Now that we have added gcc 5.1, it's time to make gcc 4.9 the default
version used in Buildroot.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gcc: add support for gcc 5.1

This commit adds support for gcc 5.1 in Buildroot. In terms of gcc
patches, compared to gcc 4.9.x:

 * Kept as is, sometimes after minor adjusments:

   100-uclibc-conf.patch
   301-missing-execinfo_h.patch
   810-arm-softfloat-libgcc.patch
   830-arm_unbreak_armv4t.patch
   840-microblaze-enable-dwarf-eh-support.patch
   850-libstdcxx-uclibc-c99.patch
   860-cilk-wchar.patch

 * Dropped:

   110-pr64896.patch
   111-pr65730.patch

 * Split in multiple parts:

   900-musl-support.patch

   The patches from Crosstool-NG for muls support are used instead of
   one single patch.

 * Renamed:

   910-gcc-poison-system-directories.patch to
   200-gcc-poison-system-directories.patch

   920-libgcc-remove-unistd-header.patch to
   201-libgcc-remove-unistd-header.patch

   Since the 9xx part of the series is now used by the various musl
   related patches.

We have tested the following configurations, with a minimal Busybox
system:

 * ARM, uClibc-ng
 * ARM, glibc
 * ARM, musl
 * x86, uClibc-ng and uClibc 0.9.33.2
 * x86, glibc
 * x86, musl

All of the configurations built fine. All the configurations boot fine
in Qemu, except x86/uClibc (either ng or 0.9.33.2), it segfaults when
running init:

devtmpfs: mounted
Freeing unused kernel memory: 300K (c1389000 - c13d4000)
init[1]: segfault at 0 ip b77708c1 sp bfa9bb0c error 4 in ld-uClibc-0.9.33.2.so[b776c000+6000]
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

We'll give some time for the uClibc developers to fix the problem
before taking other measures in Buildroot to exclude gcc 5.1 from a
x86/uClibc configuration.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

uclibc: bump uClibc-ng to 1.0.3

This commit bumps uClibc-ng to the latest version, and drops the two
patches that have been merged upstream.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python: bump to 2.7.10

Patches are simply refreshed, except
004-sysconfigdata-install-location.patch where a minor conflict
resolution was needed.

[Peter: fixup .hash as pointed out by Arnout]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package: indentation cleanup

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qemu/configs: update to latest kernel

Update most of the configs to the latest kernel version (4.1) except for
arm-nuri which is stuck.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/pinentry: fix build with Qt4

Help configure find the correct moc, as the comment in m4/qt.m4 states:

    #configure tried to run $ac_cv_path_moc and the test didn't
    #succeed. If configure shouldn't have tried this one, set
    #the environment variable MOC to the right one before running
    #configure.

Fixes:
    http://autobuild.buildroot.org/results/06c/06c5c2762ec22271fec20a6d15548011e40875d1
    http://autobuild.buildroot.org/results/0d7/0d78a2ff8c952cd104794f5049b07216978fdf11
    http://autobuild.buildroot.org/results/af8/af8f7f588dfa64d82c98a4b42ec78fd17dde137c

Also fixes using the host moc:
    http://autobuild.buildroot.org/results/836/836962f23dcad77b145fcdfeffb40e38e64d6971

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

btrfs-progs: bump to version 4.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

imagemagick: bump to version 6.9.1-6

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tiff: security bump to version 4.0.4

Fixes:
CVE-2014-8128 - Check memory allocations for failure. Also check
multiplication overflow.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gst1-plugins-bad: fix egl detection

Some egl implementations needs special compiler flags or defines (E.G.
mesa3d for wayland needs to pass -DMESA_EGL_NO_X11_HEADERS to not try to
include X11 headers).  This is correctly included in the .pc file, but the
configure logic doesn't use pkg-config so help it along.

Likewise, some implementations may need to link against other libraries, so
also pass LIBS.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gst1-plugins-bad: add support for opengl

Commit 83e29f2656a237e2c300d523776868837d3bc646 "gst1-plugins-bad: bump
version" (from 1.2.4 to 1.4.1) removed the configuration option for the
eglglessink plugin as a consequence of its removal in 1.3.1. However,
that commit did not add support for glimagesink, the plugin element to
be used as a replacement, which broke support for the EGL/GLES video
sink feature in Buildroot.

This new commit adds support for the OpenGL library and the
corresponding gl plugin, including the glimagesink element among others.

The plugin needs the library, but the library can also be used
separately in order to link custom plugins or applications against it.

The library needs at least one OpenGL API, one OpenGL platform and one
compatible window system. The implementations of these requirements that
Buildroot can currently provide are:
 - APIs: OpenGL, OpenGL ES 2.X,
 - platforms: GLX, EGL,
 - window systems: X11, Wayland, Dispmanx.

The wayland configure feature switch is shared between the corresponding
OpenGL library window system and the waylandsink plugin.

This has been tested with videotestsrc/omxmpeg4videodec/omxh264dec and
glimagesink on the Raspberry Pi, using OpenGL ES 2.X, EGL and Dispmanx.

Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump default to version 4.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: add 4.1.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain: add 4.1.x choice for headers

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openvmtools: fix legal info

In ab71dff0 it was moved to SUBDIR, but this was never reflected for the
legal-info files, update this to fix:
http://autobuild.buildroot.net/results/836/8363943cc9c967713f585209408ea087a052a12d/

[Thomas: put OPENVMTOOLS_SUBDIR before OPENVMTOOLS_LICENSE_FILES, as
suggested by Yann.]

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Karoly Kasza <kaszak@gmail.com>
Tested-by: Karoly Kasza <kaszak@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/{mesa3d, mesa3d-headers}: bump version to 10.6.0

Mesa3d 10.6 adds optional support for SHA-1:
http://cgit.freedesktop.org/mesa/mesa/commit/configure.ac?id=a24bdce46f95cbe9efd3b26f157d1eb36584861f

Adding "--without-sha1" will cause this failure during configure:

configure: error: Illegal value for --with-sha1: no

so I did not add the else-clause when no SHA-1 provider is enabled.

[Thomas: simplify else ifeq.]

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/feh: bump to version 2.13.1, add hash file

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/gdb: gdb+expat build fix

Commit 23413b51b2308225584b65c2fcd800ca8f7c56af added --with-expat
configure option and expat dependency when BR2_PACKAGE_EXPAT is
configured.  When cross-compiling, gdb configure fails because the host
system libexpat is referenced.

Configuring gdb with
--with-libexpat-prefix=$(STAGING_DIR)/usr
fixes the reference and allows gdb to build successfully.

Tested with arm-buildroot-linux-gnueabihf toolchain.

Signed-off-by: Doug Kehn <rdkehn@yahoo.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/gpm: change archive to lzma

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

pkg-generic: support for lzma archives

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

directfb: add an option for debugging support

DirectFB provides two options for debug:
* --enable-debug-support (default is yes)
* --enable-debug (default is no)
The first one provides the functions to print debug information. These
functions can be called inside DirectFB, or by an external DirectFB
driver in another package.
The second one enables verbose mode in DirectFB, using these functions.

Buildroot currently provides an option for the second one only. The
first one - which is necessary for the second one - is always enabled,
because this is the default value.

The new option (BR2_PACKAGE_DIRECTFB_DEBUG_SUPPORT) makes it possible
to disable debugging support (--disable-debug-support) in order to
build the library with no debug feature at all.

When debugging support is disabled, the target installation path of
drivers (/usr/lib/directfb-<version>) is suffixed with -pure. The
public library (/usr/lib/libdirectfb.so) remains unchanged.

Some external DirectFB drivers will install into
/usr/lib/directfb-<version>-pure in release mode. For that reason, it
is important that DirectFB can be configured to use this directory.

Signed-off-by: Cédric Marie <cedric.marie@openmailbox.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

system: make /bin/sh symlink use relative path

The symlink created by buildroot for /bin/sh is the full path to
a shell.  This does not match what busybox and other Linux
distributions do with using relative path symlinks. When handling
files on the host system this will point to the host system's shell
if present and not the target shell.

This is fixed by changing the /bin/sh symlink to use a relative path.

Fixes #8161.

[Thomas: minor fixups to the commit log suggested by Yann E. Morin.]

Signed-off-by: Matthew Starr <mstarr@hedonline.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-lxml: bump to 3.4.4

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xdriver_xf86-video-vesa: bump to version 2.3.4

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xserver_xorg-server: bump to version 1.17.2

Removed patches committed upstream:
http://cgit.freedesktop.org/xorg/xserver/commit/os/backtrace.c?h=server-1.17-branch&id=8b7e1f362bf6940eb863fd02395bf8155d10604b
http://cgit.freedesktop.org/xorg/xserver/commit/hw/xfree86/sdksyms.sh?h=server-1.17-branch&id=7a45d1684f626f3045305328c3aab85eed0673ea

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

agentpp: bump to 4.0.4

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

snmppp: bump to 3.3.5

Also add a hash file.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

a10disp: bump to version v0.6.1

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

sunxi-boards: bump to version a6a4e94066f4ec6b26fc7060dc453a6bcf26a504

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

weston: bump to version 1.8.0

- Bump to version 1.8.0
- Update hash file

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wayland: bump to version 1.8.1

- Bump to version 1.8.1
- Update hash file

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

tor: bump to version 0.2.6.9

- Bump to version 0.2.6.9
- Update hash file
- Adapt patch to new version

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

postgresql: bump to version 9.4.4

- Bump to version 9.4.4
- Update hash file

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

pinentry: bump to version 0.9.4

- Bump to version 0.9.4
- Update hash file
- Remove upstreamed patches

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

fluxbox: explicitly configure optional dependencies

The following commit explicitly configures optional dependencies based
off the respective package selections for a given configuration.

In addition, this commit also cleans up some obsolete/incorrect
arguments. With the introduction of (at least) Fluxbox 1.3.7, the
'--with-imlib2-prefix' argument no longer exists. The argument
'--with-xpm-prefix' has never existed; it was accidentally committed
mimicking the configuration used to provide imlib2.

Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gnuradio: add processing blocks

GNURadio provides a set of processing blocks like analog or digital
communication, filters, ...

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[build-tested only]
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/tvheadend: bump version

host-gettext is needed since
https://github.com/tvheadend/tvheadend/commit/bad281a9f5bbb8e7f968d400f8096908dfd798b9#diff-e2d5a00791bce9a01f99bc6fd613a39d

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dnsmasq: bump to version 2.73

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mpfr: bump to version 3.1.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: bump 3.4.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lvm2: bump to version 2.02.121

- Bump to version 2.02.121
- Update hash file

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lftp: bump to version 4.6.3a

- Bump to version 4.6.3a
- Update hash file

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

git: bump to version 2.4.4

- Bump to version 2.4.4
- Update hash file

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package: indentation cleanup

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-pyinotify: bump to 0.9.6

Remove hash file as the project doesn't provide manual tarballs
on GitHub.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lua: bump to version 5.3.1

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-tornado: bump to 4.2

Add md5 from pypi.python.org.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

tmux: bump to 2.0

Add new location as tmux moved to GitHub.

Remove the patch as it was already merged upstream.
Remove related AUTORECONF as well.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

zedboard: Upgrade to Linux xilinx-v2015.1 (3.18)

Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

wireshark: bump to version 1.12.6

- Bump to version 1.12.6
- Update hash file

The following vulnerabilities have been fixed in 1.12.6:

 - wnpa-sec-2015-19
   WCCP dissector crash. (Bug 11153)
 - wnpa-sec-2015-20
   GSM DTAP dissector crash. (Bug 11201)

[Thomas: indicate that this is a security related updated in the
commit log, as suggested by Gustavo.]

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libcurl: bump to version 7.43.0

- Bump to version 7.43.0
- Update hash file

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

fluxbox: fix build against xlib_libXpm

Explicitly configure XPM support based on the library selection provided
(BR2_PACKAGE_XLIB_LIBXPM). It has been observed on different hosts that
XPM support may or may not be included based off the state of the host's
system. One can validate XPM support is included in Fluxbox by using the
command `fluxbox -info`.

Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-netifaces: add hash file

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

hdparm: bump to 9.48

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: bump 3.{12,18}.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

audit: new package

[Thomas:
 - remove S01audit, which isn't completely compliant with the
   Buildroot style.
 - make the package available only on architectures for which the
   system call tables are available, and add some comments about this
   in the .mk file.]

Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

setools: new package

[Thomas:
  - remove HOST_AUTORECONF = YES, since it is implied by AUTORECONF = YES.]

Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

sqlite: Add host build support

Host sqlite is required by the host build of the setools package which
is required for SELinux support.

Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lftp: indicate why autoreconf is needed

We no longer have any patch touching configure.ac/Makefile.am, so one
might wonder why we're autoreconfiguring the package. The reason is
that our libtool patch doesn't apply on the code provided by the lftp
tarball.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lftp: bump version to 4.6.2

0001-Remove-unused-libraries-path.patch has now been applied upstream,
so remove it from Buildroot.

Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/openvmtools: introduce SUBDIR variable and update patches

The Open-vm-tools package is now distributed from GitHub and a new
subdirectory was introduced, which breaks the Buildroot process.

This patch adds the _SUBDIR variable in the Makefile and also updates
all distributed patches.

Fixes:

http://autobuild.buildroot.net/results/bfd10c8d454a2686ebb1c4afdb49c55e39a9dd67/

Signed-off-by: Karoly Kasza <kaszak@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/gpm: add hash file

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/modem-manager: bump to version 1.4.8

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/network-manager: bump to version 1.0.2

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>