pkg-generic: allow full URLs for <pkg>_EXTRA_DOWNLOADS

The current logic for <pkg>_EXTRA_DOWNLOADS assumes that it is a list
of files, all hosted at <pkg>_SITE. However, just like for
<pkg>_PATCH, it may be useful to specify <pkg>_EXTRA_DOWNLOADS entries
that are hosted on a different site than the package <pkg>_SITE.

This commit implements this, by re-using the same logic as the one
used for <pkg>_PATCH.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

pkg-generic: refactor the "Downloading" message logic

In the .stamp_downloaded hook, the logic to decide whether or not to
display the "Downloading" message is treating the check of
<pkg>_SOURCE as a special case. But in fact, there is no real reason
to do so: the existing loop used for <pkg>_PATCH and
<pkg>_EXTRA_DOWNLOADS could work just as well.

This commit therefore refactors this piece of code, to have a single
loop checking <pkg>_SOURCE, <pkg>_PATCH and <pkg>_EXTRA_DOWNLOADS.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

pkg-generic: take into account <pkg>_EXTRA_DOWNLOADS to display "Downloading" message

The .stamp_downloaded target displays the "Downloading" message even
if there is really something to download. However, this logic only
checks for <pkg>_SOURCE and <pkg>_PATCH: it does not check if
something needs to be downloaded in <pkg>_EXTRA_DOWNLOADS.

This commit fixes that, which makes sure that the "Downloading"
message is displayed if one of the items in <pkg>_EXTRA_DOWNLOADS has
not yet been downloaded.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

pkg-generic: fix the logic showing the "Downloading" message

Even though the .stamp_downloaded target is executed for each package
being built, the pkg-generic infrastructure tries to not display the
"Downloading" message when there is in fact nothing to download.

Unfortunately, the logic was incorrect for the patch download: it
forgot the fact that <pkg>_PATCH can contain either file names (in
which case we assume the patch should be downloaded from <pkg>_SITE),
or full URLs. The latter case was not properly handled, as we were
checking if $(DL_DIR)/<full URL> existed, while we should be testing
if $(DL_DIR)/`basename <full URL>` exists.

This patch fixes that, which makes sure the "Downloading" message is
displayed only when necessary.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

linux: use the package infrastructure to download patches

The linux package has a special handling of patches, with quite a bit
of legacy in it. A problem caused by this special handling is that the
linux package calls directly the DOWNLOAD_WGET macro, which means that
the package infrastructure isn't aware of which patches get
downloaded, and it prevents doing changes inside the package download
infrastructure.

This commit changes the handling of patches in the linux package in
the following way:

 * The LINUX_PATCHES variable is kept as is: it lists all the patches
   mentioned in the Config.in option BR2_LINUX_KERNEL_PATCH. This
   option can contain http://, ftp://, https:// URLs, path to local
   files or local directories.

   This variable is *not* used by the generic package infrastructure,
   so it is purely internal to the Linux package.

 * The LINUX_PATCH variable is now filled in with the list of patches
   that should be downloaded. It is derived from LINUX_PATCHES by
   filtering the patches that have http://, ftp:// or https:// in
   their path. Since <pkg>_PATCH is handled by the package
   infrastructure, it means that those patches are now automatically
   downloaded and applied by the package infrastructure.

 * The LINUX_APPLY_PATCHES hook is renamed to
   LINUX_APPLY_LOCAL_PATCHES, because it is now only responsible of
   applying local patches: remote patches are handled by
   LINUX_PATCH. The implementation of the hook is changed to filter
   out the patches that have already taken care of by LINUX_PATCH, so
   that we only iterate through the list of local patches or local
   patch directories.

[Thomas: adjust comment in the code according to Yann comments.]

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

libgtk2: adjust style

Cleanup indentation and mention why we need AUTORECONF.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libgtk2: drop libxcomposite mandatory dep

It's not selected, not required and duplicate with the autodep.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libgtk2: bump to version 2.24.27

Also add hash file.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

logrotate: add hash file

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

arch/sparc: doesn't have atomics

Cores older than v9 don't seem to have atomics so remove it.
Fixes a test build of pulseaudio for example.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libseccomp: bump version to 2.2.0

- change upstream URL, project moved to github
- removed patches not needed anymore since project switched to autoconf
- add newly supported platforms to Config.in

[Thomas:
 - remove hash file, since we're fetching from github now.]

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

arch: BINFMT_FLAT_SHARED is not really shared for buildroot purposes

Although BINFMT_FLAT_SHARED is indeed a shared library format, it does
not support dynamic library loading with dlopen(). So for buildroot
purposes, BR2_STATIC_LIBS shouldn't be selected.

As it happens, the compiler options that are added for
BINFMT_FLAT_SHARED also make the compiler ignore the -static option, so
we can simply force BR2_STATIC_LIBS and things work out perfectly.

Therefore, remove the select of BR2_BINFMT_SUPPORTS_SHARED from
BINFMT_FLAT_SHARED, which in turn makes sure that BR2_STATIC_LIBS is
selected.

[Arnout: rewrite commit message, add explanatory comment]

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/mplayer: add optional giflib support

[Thomas: Use --enable-gif / --disable-gif, and do not pass
--extra-libs.]

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/mplayer: needs host-pkgconf

mplayer's custom configure script can use pkg-config to discover
dependencies.

[Thomas: improve commit log.]

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

squid: adjust style

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

squid: bump to version 3.5.3

[Thomas: slightly expand the comment about atomic operations, after
the discussion with Baruch.]

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/sysdig: New package

Sysdig is open source, system-level exploration: capture system state
and activity from a running Linux instance, then save, filter and
analyze.

[Thomas:
 - remove unneeded 0001-makefile-driver-compile-options.patch, instead
   pass KERNELDIR in the make options when building the driver, and
   pass the contents of $(LINUX_MAKE_FLAGS) directly.
 - use $(SYSDIG_BUILDDIR) instead of $(@D)/buildroot-build, so that
   the package does not depend on the package infra using specifically
   buildroot-build as the build subdirectory.
 - use $(MAKE) -C <foo> instead of cd <foo>; $(MAKE).
 - rename 0002 patch to 0001, since the 0001 patch is removed.]

Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Tested-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

logrotate: bump version to 3.8.9

This version comes with a new build system based on autoconf/automake,
so we switch from generic-package to autotools-package. However, since
the tarball does not contain a pre-generated configure script, we have
to set LOGROTATE_AUTORECONF = YES.

[Thomas:
  - add comment explaining why AUTORECONF = YES is needed
  - expand commit log
  - use --without/--with instead of --with=yes/--with=no
  - fix indentation in the ACL condition]

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

x11r7/xutil_util-macros: add hash file

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

x11r7/xutil_makedepend: add hash file

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

x11r7/xproto_fontcacheproto: add hash file

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

x11r7/xproto_fixesproto: add hash file

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

x11r7/xproto_dri3proto: add hash file

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

x11r7/xproto_dri2proto: add hash file

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

x11r7/xproto_dmxproto: add hash file

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

x11r7/xproto_damageproto: add hash file

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

x11r7/xproto_compositeproto: add hash file

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

x11r7/xproto_bigreqsproto: add hash file

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

x11r7/xproto_applewmproto: add hash file

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

x11r7/xproto_inputproto: add hash file

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

x11r7/xproto_kbproto: add hash file

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

x11r7/xproto_presentproto: add hash file

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

x11r7/xproto_recordproto: add hash file

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

x11r7/xproto_renderproto: add hash file

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

x11r7/xproto_resourceproto: add hash file

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

x11r7/xproto_scrnsaverproto: add hash file

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

x11r7/xproto_videoproto: add hash file

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

x11r7/xproto_windowswmproto: add hash file

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

x11r7/xproto_xcmiscproto: add hash file

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

x11r7/xproto_xextproto: add hash file

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

x11r7/xproto_xf86bigfontproto: add hash file

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

x11r7/xproto_xf86dgaproto: add hash file

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

x11r7/xproto_xf86driproto: add hash file

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

x11r7/xproto_xf86vidmodeproto: add hash file

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

x11r7/xproto_xineramaproto: add hash file

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

x11r7/xproto_xproto: add hash file

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nodejs: Security bump to version 0.10.38

Version 0.10.38 upgrades OpenSSL to version 1.0.1m, which includes fixes for
several CVEs:
  - CVE-2015-0204
  - CVE-2015-0286
  - CVE-2015-0287
  - CVE-2015-0289
  - CVE-2015-0292
  - CVE-2015-0293
  - CVE-2015-0209
  - CVE-2015-0288

Version 0.10.37 comes with a fix for CVE-2015-0278.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gnutls: security bump to version 3.3.14

Fixes a two-byte stack overflow in DTLS 0.9 protocol (no CVE assigned
yet).

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libtasn1: security bump to version 4.4

Corrects a two-byte stack overflow in asn1_der_decoding (no CVE
assigned yet).

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

musl: security bump to version 1.1.8

Fixes:
CVE-2015-1817 - stack-based buffer overflow in IPv6 literal parsing.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

aiccu: fix uclibc builds

uClibc defines __GLIBC__ but does not provide res_nquery.

Fixes:
http://autobuild.buildroot.net/results/17248fa7f4deaacdab9bb22a777f51209af11e60/
http://autobuild.buildroot.net/results/bf155246563e2f6c44e18f7ee423305600a68b7e/
http://autobuild.buildroot.net/results/32a8c566604e79bf2de7d7236b49b6ab40b8cefd/
http://autobuild.buildroot.net/results/4093e4679412b50048860299dcfc301927e2cabc/

Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mc: new package

[Thomas: fix license, it is actually GPLv3+, not GPLv3.]

Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libva-intel-driver: bump version to 1.5.1

Removed 0002-wayland.patch, fixed upstream
http://cgit.freedesktop.org/vaapi/intel-driver/commit/?id=bf324e3440246a487997a1624ac862e3e4027f9e
Therefore autoreconf is not necessary anymore.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libva: bump version to 1.5.1

Removed 0002-wayland.patch, patch is not necessary anymore.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-ext: update Xenomai help text

Reword the help text and get ride of the supported kernel
version list which is outdated since Xenomai version bump.

[Thomas: rewrap text to the appropriate length, fix some typos.]

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/ccache: add hash file

Signed-off-by: Karoly Kasza <kaszak@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gstreamer/gst-plugin-x170: requires the Linux kernel

Add a missing reverse depency from the on2-8170-libs package.

Fixes warning:
warning: (BR2_PACKAGE_GST_PLUGIN_X170) selects BR2_PACKAGE_ON2_8170_LIBS which has unmet direct dependencies (BR2_arm926t && BR2_TOOLCHAIN_USES_GLIBC && BR2_LINUX_KERNEL)

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/ccache: bump version to 3.1.11

Signed-off-by: Karoly Kasza <kaszak@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

modem-manager: bump to 1.4.6

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

aiccu: musl patches

Fixes
http://autobuild.buildroot.net/results/8c666ef11310868097601b6de1dd25779729b878/

if_ether.h issue discussion: http://www.openwall.com/lists/musl/2012/10/11/1

Patch 0001-gnutls-and-uclibc-fixes split into gnutls part (0001) and res_ninit
part (0005) which is not uclibc-specific but happens to affect musl as well.

Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gdb: deprecate version 7.7.x

Now that 7.9 was added and 7.8.x is default we don't want to have a
dozen versions so mark it as deprecated.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gdb: switch default to 7.8.x

Now that we've got 7.9 added default to version 7.8.x

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gdb: add version 7.9

Add gdb version 7.9, and adjust the tarball logic to default to .tar.xz
(for 7.8 & 7.9), fall back to .tar.bz2 for 7.7.x and leave the rest
alone.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/exim: fix build error with external arc toolchain due to missing libnsl

Fixes
http://autobuild.buildroot.net/results/331/331ed781b422448205fb9e7c9730ec0c438d6306/
http://autobuild.buildroot.net/results/402/402d64965ac7ac6e1d4e1990080394958802fe8c/
http://autobuild.buildroot.net/results/960/9605bac2972d3e3d3fb91947ae6921e89210247b/
http://autobuild.buildroot.net/results/6b6/6b61ea80a3a6dcead233c4b408eba8b8d647e841/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

yaml-cpp: requires boost

The Boost C++ library is already selected in the Config.in but it was
missing in the yaml-cpp.mk file.

Fix build failure:
CMake Error at /home/tetsuya/buildroot/br/output/host/usr/share/cmake-3.1/Modules/FindBoost.cmake:1182 (message):
  Unable to find the requested Boost libraries.
<snip>
make: *** [/home/tetsuya/buildroot/br/output/build/yaml-cpp-0.5.1/.stamp_configured] Error 1

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/irqbalance: bump to 1.0.9

Signed-off-by: Karoly Kasza <kaszak@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

support/mkusers: enhance error messages

The current error messages are a bit terse, and do not provide all the
required information.

Expand them to provide more context.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Tom Elliott <tommygunsster@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

distclean: clean a bit more

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/dovecot: fix hash typo

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mjpg-streamer: Fix build with ccache enabled.

Quote the TARGET_CC variable, otherwise, if ccache is enabled:

[...] make CC=$TARGET_CC [...]
is expanded to e.g.
[...] make CC=ccache gcc [...]

The build succeeds with "make[2]: Nothing to be done for '[...]gcc'".
and the program is compiled at "make install" time, with the default
host compiler, resulting in a binary that does not run on the target.

Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/riotboard: bump kernel to version 3.19

Signed-off-by: Nikolay Dimitrov <picmaster@mail.bg>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

haserl: bump to version 0.9.35

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux: bump default to version 3.19.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: bump 3.{10,14,19}.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

btrfs-progs: bump to version 3.19.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

eudev: bump to version 3.0

Drop upstream patches, disable autoreconf (no longer needed) and use
upstream hash.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/dovecot-pigeonhole: add hash

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/dovecot: add hash

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi-audioencoder-flac: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi-audioencoder-vorbis: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi-pvr-addons: bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi: bump to version 14.2-Helix

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

e2tools/host: remove hyphen

All the other host packages that have a menu entry use a space, so make
it consistent.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/powertop: needs gettextize, 2nd try

If host-gettext was compiled before powertop it is picked up by autoreconf which
leads to a broken compile. To fix this unconditionally include host-gettext as
dependency and move

POWERTOP_GETTEXTIZE = YES

outside the if-clause for BR2_NEEDS_GETTEXT

Fixes
http://autobuild.buildroot.net/results/24e/24e312271cf07a8dd966b43f153a06ddc858a786/
http://autobuild.buildroot.net/results/511/511a1c76bfd0ebf637e5abcd6fecc4d6a683ed3e/
http://autobuild.buildroot.net/results/652/65246f6f71e67c2637efbe8bb6e501750629d5fb/

and many others

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gcc: remove stray bfin --with-cpu exclusion

We no longer support an internal bfin toolchain hence it's dead code.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gcc: mark 4.5.x as deprecated

It was kept for the internal blackfin toolchain which has been removed
since because of lack of maintenance and testing.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

erlang: fix incorrect use of AC_EGREP_CPP

Using 'AC_EGREP_CPP(yes' without restraining the pattern always return
true if it runs from a path containing the string 'yes'.

Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

busybox: bump to version 1.23.2

Drop upstream patches.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: bump 3.{12,18}.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openntpd: bump to version 5.7p4

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain: enable musl for sh

The SuperH architecture is supported by the musl libc since some time
now, so let's enable it.
Tested via qemu_sh4_r2d_defconfig.

Signed-off-by: Lionel Orry <lionel.orry@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dhcpcd: fix wrong macro name

Fixes:
http://autobuild.buildroot.net/results/788/788e7103c7c7c0199f221f42be6c22cc9eac3e0b/
http://autobuild.buildroot.net/results/673/673d4a0a334c4694cc4dd05ef99069f681f98f0a/
http://autobuild.buildroot.net/results/4bb/4bbf9e785eb9cb0f916f0a2bdaf7a6a5f639f7ea/

and many more.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs: add defconfig for Freescale i.MX31 PDK

The i.MX31 Product Development Kit (or PDK) is Freescale development board
based on the i.MX31 application processor.

This defconfig is based on mainline kernel v3.15.10, and is aimed at a PDK in
"3 stack" configuration, with CPU engine board, personality board and debug
board.

Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

which: bump to version 2.21

Add hash file and switch to gnu mirror.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

sudo: bump to version 1.8.13

Patch now upstream so remove.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-lxml: bump to 3.4.2

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-tornado: bump to 4.1

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

nano: bump to version 2.4.0

Also switch to gnu mirror.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openocd: openjtag needs libusb-compat

Since commit 9bdf5926 (package/openocd: depends on libftdi1 instead of
libftdi) the OpenJTAG Programmer can be built without libusb-compat, that is a
dependency of libftdi (but not libftdi1). This breaks the build, because
openjtag.c uses libusb-compat headers. Select BR2_PACKAGE_LIBUSB_COMPAT to fix
this.

Fixes:
http://autobuild.buildroot.net/results/d19/d1969e6df56835568fb908b7f252aec0915d9fa4/
http://autobuild.buildroot.net/results/f06/f06ed6df6138ab399036c397c3f72d33d64fe0a3/
http://autobuild.buildroot.net/results/bd7/bd7f90f3cc1d2b395f9849eb0630c2602a075bf5/
...

Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/dovecot-pigeonhole: bump version to 0.4.7

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>