package/ipset: bump to version 7.1

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/qemu_riscv64_virt_defconfig: bump Linux version

Since riscv64 works with linux default defconfig, this patch drop custom config.

Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Tested-by: Mark Corbin <mark.corbin@embecosm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/wavemon: add upstream patch to fix musl/uclibc build issue

In version 0.9.0 wavemon uses the GLIBC-specific extension `on_exit()`
which is not available in musl and uClibc.

According to the Linux kernel man page [1]: "Portable application should
avoid this function, and use the standard atexit(3) instead."

Add patch from upstream which is fixing this issue by dropping
`on_exit()` and using the standard `atexit()` instead. Note, that the commit
message of the upstream patch was changed to add some useful information.

[1] http://man7.org/linux/man-pages/man3/on_exit.3.html

Backported from: f6e20c9c6e9b50963caaf5483248d329473a6815

Fixes:
http://autobuild.buildroot.net/results/ae54441c65fe9a1bdcf743aa7f6a208e5545ca29
http://autobuild.buildroot.net/results/40fd66e6a351a1acd537ade715ab3e993eddb1c1

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

musl: bump to version 1.1.21

>From the upstream release announcement:

"""
This release makes improvements with respect to default thread stack size,
including increasing the default from 80k to 128k, increasing the default
guard size from 4k to 8k, and allowing the default to be increased via ELF
headers so that programs that need larger stacks can be build without
source-level changes, using just LDFLAGS. Insufficient stack size for AIO
threads on kernels that don't honor the constant MINSIGSTKSZ is also fixed.

The glob core has been rewritten to fix inability to see past
searchable-but-unreadable path components, and to avoid excessive stack usage
and unnecessary syscalls. The tsearch AVL tree implementation has also been
rewritten for better size and performance. The math library adds more native
single-instruction implementations for arm, s390x, powerpc, and x86_64.

Various bugs are fixed, including several possible deadlocks, one of which was
a new regression in 1.1.20.
"""

Drop upstream patch 0002 which is included in the release.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-uvloop: bump to version 0.11.3

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-pyopenssl: bump to version 19.0.0

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/imx6-sabresd: Bump kernel version

Bump the kernel version to 4.19.16.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libcpprestsdk: bump to version 2.10.9

- Remove second patch (already in version)
- Fix build with gcc 4.7:
  https://github.com/Microsoft/cpprestsdk/commit/e6498b2f99cf20163d8224716d8127f9089b01ef

Fixes:
 - http://autobuild.buildroot.org/results/a080dbe2977cd35e4f8351d864bd71aaa8f9b743

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

shadowsocks-libev: fix static build with netfilter_conntrack

Fixes:
 - http://autobuild.buildroot.org/results/22a28e8fd8182e1c908541dbc5b0ee087c3803e6

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/sunxi-mali-mainline-driver: bump version

For 4.20 support.

git shortlog --invert-grep --grep travis --no-merges 143ff2b17de63ce931c4f758771969e75c09a4c7..
Roman Stratiienko (1):
      mali: support building against 4.20

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/openresolv: update to fix install location

Update to install in /sbin as expected by other applications
such as strongswan instead of /usr/sbin

Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

exempi: fix libiconv dependency

Fixes:
 - http://autobuild.buildroot.org/results/a77a891683ae9a135dc31be1b419061922d0e1ba

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tekui: disable parallel build

It seems tekui has parallel build issues since November 2017:
 - Fatal error: can't create build/posix/directfb_lua.lo: No such file or directory
 - /home/peko/autobuild/instance-3/output/host/bin/microblazeel-buildroot-linux-uclibc-ar: ../../lib/posix/libtekdebug.a: No such file or directory
 - Fatal error: can't create build/posix/visual_mod.lo: No such file or directory

So disable parallel build

Fixes:
 - http://autobuild.buildroot.org/results/0732568fcbaa6829154fa91c352b52f074384df0
 - http://autobuild.buildroot.org/results/580593e79bc4ecdea1dc71d16607e5c88f87403c

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libftdi1: fix python build with cmake < 3.7

Fixes:
 - http://autobuild.buildroot.org/results/1091872e2b77d789e361d1ddefd235c738933c55

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

rtc-tools: rtc-sync needs threads support

Fixes:
http://autobuild.buildroot.net/results/573/57350271eff9284a8b07ceef02a9960f3568a0a3/
http://autobuild.buildroot.net/results/b6c/b6cf05deab77c7a84c721c95d9d618b1ddc2957e/
http://autobuild.buildroot.net/results/187/1877cfbbe37ef15c16cec5d6ad6e3d4d60bc3cbc/

Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ocrad: bump to version 0.27

Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libupnpp: remove AUTORECONF

Commit 9b551dacf74445d58aaefef349e2817e009c9d5d removed patch on
configure.ac so remove uneeded LIBUPNPP_AUTORECONF

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libupnpp: fix libupnp dependency

Commit 9b551dacf74445d58aaefef349e2817e009c9d5d added support for
libupnp18 but without updating LIBUPNPP_DEPENDENCIES

Fixes:
 - http://autobuild.buildroot.org/results/aa734318b9ad318d25e772585c8794429cc0f489

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

odhcp6c: fix build with gcc 8

Retrieve and backport upstream patch to fix build with gcc 8

Fixes:
 - http://autobuild.buildroot.org/results/1c6f0d1f2fcd3474af81b3851d875f834a3a0a4f

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/upmpdcli: bump to version 1.4.0

upmpdcli switched license from GPL-2.0+ to LGPL-2.1+, therefore update
the hash file for the license file "COPYING".

Note, that upmpdcli depends on libupnpp 0.17.0.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libupnpp: bump to version 0.17.0

libupnpp 0.17.0 adds compatibility for libupnp 1.8. Therefore, we prefer
selecting libupnp 1.8 and falling back to libupnp 1.6.

Drop patch 0001, which has been merged upstream.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-txtorcon: bump to version 19.0.0

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-logbook: bump to version 1.4.3

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-bcrypt: bump to version 3.1.6

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libuv: bump to version 1.25.0

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

unixodbc: needs dynamic library

Fixes:
 - http://autobuild.buildroot.org/results/1036ee061ce7f7747d5514c61866da60bcfae769

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Peter: propagate to PHP_EXT_PDO_UNIXODBC as well]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

php: security bump to 7.3.1

Fixes the following security issue:

- CVE-2018-19935: Allows remote attackers to cause a denial of service
  (NULL pointer dereference and application crash) via an empty string in the
  message argument to the imap_mail function.
https://www.cvedetails.com/cve/CVE-2018-19935/

Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

php: switch to pcre2

php moved from pcre to pcre2 since bump to version 7.3 and
http://github.com/php/php-src/commit/a5bc5aed71f7a15f14f33bb31b8e17bf5f327e2d

This fixes a build failure: without this change, if BR2_PACKAGE_PCRE is
set, external pcre support in php is (wrongly) enabled with
--with-pcre-regex but because pcre2 was not found, php fallbacks on
built-in pcre2 without the "SLJIT_SINGLE_THREADED hack"

Fixes:
 - http://autobuild.buildroot.org/results/40ef339019203d2cc49d388e222cf17c3ca37944

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Revert "package/php: fix building pcre extension"

This reverts commit 745f884e41b5f350296e8448f5fc31d20f67a077.

This was the wrong fix: issue is that php moves from pcre to pcre2 since
version 7.3.0 and
http://github.com/php/php-src/commit/a5bc5aed71f7a15f14f33bb31b8e17bf5f327e2d

This patch will always disable external pcre2 support and raise a build
failure when toolchaine does not have pthread

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-cython: bump to version 0.29.3

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-crossbar: bump to version 19.1.2

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gnu-efi: fix build with gcc 4.8

Fixes:
 - http://autobuild.buildroot.org/results/a0ca37b5ed27af445344e3ac49dc87bb17512c50

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libgeotiff: bump to version 1.4.3

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tesseract-ocr: disable documentation

Fixes:
 - http://autobuild.buildroot.org/results/a608e9bfb2b0161c45ae490e2866d96763593723

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Acked-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/syslog-ng: fix startup with systemd

By default syslog-ng installs a .service that requires a config file at
/etc/default, so provide one with the default values.

It's also necessary to enable the service by means of a symlink created
at /etc/systemd/system/multi-user.target.wants.

Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/pango: add upstream security fix for CVE-2018-15120

libpango in Pango 1.40.8 through 1.42.3, as used in hexchat and other
products, allows remote attackers to cause a denial of service (application
crash) or possibly have unspecified other impact via crafted text with
invalid Unicode sequences.

https://nvd.nist.gov/vuln/detail/CVE-2018-15120

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libsndfile: add upstream post-1.0.28 security fixes

Fixes the following security vulnerabilities:

CVE-2017-14634: In libsndfile 1.0.28, a divide-by-zero error exists in the
function double64_init() in double64.c, which may lead to DoS when playing a
crafted audio file

CVE-2017-17456: The function d2alaw_array() in alaw.c of libsndfile
1.0.29pre1 may lead to a remote DoS attack (SEGV on unknown address
0x000000000000), a different vulnerability than CVE-2017-14245

CVE-2017-17457: The function d2ulaw_array() in ulaw.c of libsndfile
1.0.29pre1 may lead to a remote DoS attack (SEGV on unknown address
0x000000000000), a different vulnerability than CVE-2017-14246

CVE-2018-13139: A stack-based buffer overflow in psf_memset in common.c in
libsndfile 1.0.28 allows remote attackers to cause a denial of service
(application crash) or possibly have unspecified other impact via a crafted
audio file.  The vulnerability can be triggered by the executable
sndfile-deinterleave

CVE-2018-19661: An issue was discovered in libsndfile 1.0.28.  There is a
buffer over-read in the function i2ulaw_array in ulaw.c that will lead to a
denial of service

CVE-2018-19662: An issue was discovered in libsndfile 1.0.28.  There is a
buffer over-read in the function i2alaw_array in alaw.c that will lead to a
denial of service

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/asterisk: bump version to 16.1.1

Fixes a regression introduced in 16.1.0:
https://issues.asterisk.org/jira/browse/ASTERISK-28222

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/wireshark: security bump to version 2.6.6

Fixes the following security vulnerabilities:

- wnpa-sec-2019-01 The 6LoWPAN dissector could crash. Bug 15217. CVE-2019-5716
  https://www.wireshark.org/security/wnpa-sec-2019-01

- wnpa-sec-2019-02 The P_MUL dissector could crash. Bug 15337. CVE-2019-5717
  https://www.wireshark.org/security/wnpa-sec-2019-02

- wnpa-sec-2019-03 The RTSE dissector and other dissectors could crash.  Bug
  15373.  CVE-2019-5718
  https://www.wireshark.org/security/wnpa-sec-2019-03

- wnpa-sec-2019-04 The ISAKMP dissector could crash. Bug 15374. CVE-2019-5719
  https://www.wireshark.org/security/wnpa-sec-2019-04

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

{linux, linux-headers}: bump 4.{4, 9, 14, 19, 20}.x series

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libmad: needs autoreconf

libmad uses a very old configure script.

When the toolchain lacks C++ and the build machine lacks /lib/cpp, this
old configure script fails because it can't find a C++ preprocessor that
is valid:

    checking for arm-buildroot-linux-uclibcgnueabi-g++... no
    checking whether we are using the GNU C++ compiler... no
    checking whether no accepts -g... no
    checking dependency style of no... none
    checking how to run the C++ preprocessor... /lib/cpp
    configure: error: C++ preprocessor "/lib/cpp" fails sanity check
    See `config.log' for more details.

This is yet another case that was tentatively fixed by bd39d11d2e
(core/infra: fix build on toolchain without C++), further amended by
4cd1ab15886 (core: alternate solution to disable C++).

However, this only works on libtool scripts that are recent enough, and
thus we need to autoreconf to get it.

We also need to patch configure.ac so that it does not fail on the
missing, GNU-specific files: NEWS, AUTHORS, and Changelog.

Fixes:
 - http://autobuild.buildroot.org/results/6a6aa29295bd70679c3a22a149e79010fa20c1bf

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/openvmtools: bump version to 10.3.5

Fixes build against glibc 2.28: closes #11546
http://autobuild.buildroot.net/results/f2c/f2c73480b5a1060bb17ac260ef82c3e641fad085/
http://autobuild.buildroot.net/results/e21/e219b8bacb52bb661eb6663b82f549ed941f26fe/

Use released tarball rather than github helper.  The tarball does not
contain the open-vm-tools sub directory, so adjust the paths in the patches
to match and drop OPENVMTOOLS_SUBDIR.

Drop 0001-has_bsd_printf.patch: msgList.c has been removed upstream since:
https://github.com/vmware/open-vm-tools/commit/dc81979e78e1b8f42639aeb7aaec69f7ea49eb79

Drop 0004-uclibc_secure_getenv.sh: uClibc-ng provides secure_getenv() since
1.0.22.

Renumber remaining patches.

Add hash for license file.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/cargo: pass appropriate library path to the linker

When linking the host cargo binary, the linker should be told to find
libraries in $(HOST_DIR)/lib, otherwise it will not work libraries
such as libhttp_parser. This was found with per-package directory
support, where the build failed with:

  = note: /usr/bin/ld: cannot find -lhttp_parser
          collect2: error: ld returned 1 exit status

In order to fix this, instead of passing -L$(HOST_DIR)/lib during the
build of Cargo, we make sure all flags in $(HOST_LDFLAGS) are passed.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/pkg-meson: support per-package directories

Currently, package/meson/meson.mk generates a single global
cross-compilation.conf file, with the path to the compiler, cflags,
ldflags, and various other details. This file is then used when
building all meson-based packages.

This causes two problems:

 - It is not compatible with per-package directories, because with
   per-package folders, we need to use a different compiler, and
   possibly CFLAGS/LDFLAGS for each package.

 - It is not possible to define per package CFLAGS. Indeed, when
   cross-compiling, meson doesn't support passing CFLAGS through the
   environment, only the CFLAGS from cross-compilation.conf are taken
   into account.

For this reason, this commit:

 - Introduces a per-package cross-compilation.conf, which is generated
   by the pkg-meson infrastructure in the "configure" step right
   before calling meson. The file is generated in $(@D)/build/, and
   because it is generated within a given package "configure" step,
   the compiler path is the one of this package.

 - Keeps the global cross-compilation.conf in $(HOST_DIR)/etc/meson/,
   for the SDK use-case of Buildroot. Since we want the final and
   global values of the compiler path, CFLAGS and LDFLAGS, generating
   this global cross-compilation.conf is moved to a
   TARGET_FINALIZE_HOOKS. If we were keeping this as a
   HOST_MESON_POST_INSTALL_HOOKS, it would contain values specific to
   the host-meson package.

For now, we don't yet support per-package CFLAGS/LDFLAGS, but having
such per-package cross-compilation.conf is a necessary preparation to
achieve this goal.

This commit has been tested by building all Buildroot packages that
use meson: json-glib, systemd, enlightenment, at-spi2-core, ncmpc,
libmpdclient and ncmpc.

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Thomas:
 - add extended commit log
 - in pkg-meson.mk, re-use variables defined in meson.mk to do the
   replacement of CFLAGS/LDFLAGS/CXXFLAGS
 - move the generation of the global cross-compilation.conf to a
   TARGET_FINALIZE_HOOKS
 - testing with per-package folders]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Makefile: move definition of TARGET_DIR inside .config condition

In a follow-up commit introducing per-package directory support, we
will need to define TARGET_DIR in a different way depending on the
value of a Config.in option. To make this possible, the definition of
TARGET_DIR should be moved inside the BR2_HAVE_DOT_CONFIG condition.

We have verified that $(TARGET_DIR) is only used within the
BR2_HAVE_DOT_CONFIG condition. Outside of this condition, such as in
the "clean" target, $(BASE_TARGET_DIR) is used.

Suggested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

support/scripts/check-host-rpath: document existing functions

As suggested by Arnout Vandecappelle, let's document the
elf_needs_rpath() and check_elf_has_rpath() functions, before we make
them a bit more complicated with per-package directory support.

Suggested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

zbar: bump to version b3b4e32b55f570372fc3af473e51f0a13ee57869

- Add hash for license file
- Fix build with kernel headers >= 4.4 with:
  https://git.linuxtv.org/zbar.git/commit/?id=b3b4e32b55f570372fc3af473e51f0a13ee57869

Fixes:
 - http://autobuild.buildroot.org/results/630204315eac6e2800bc13c1486a5a525bf9ab37

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

apr: fix runtime tests for cross compile

- epoll supported since linux-2.5.44/glibc-2.3.2 (see [1])
 - dup3 supported since linux-2.6.27/glibc-2.9 (see [2])
 - SOCK_CLOEXEC supported on linux (see [3])
 - accept4 suppported since linux-2.6.28/glibc-2.10 (see [4])

Fixes [5] apache runtime failure (#11576)

  [mpm_event:crit] [pid 173:tid 1996214272] (70023)This function has not been
      implemented on this platform: AH00495: Couldn't create a Thread Safe Pollset.
      Is it supported on your platform?Also check system or user limits!
  [:emerg] [pid 173:tid 1996214272] AH00017: Pre-configuration failed, exiting

[1] http://man7.org/linux/man-pages/man7/epoll.7.html
[2] https://linux.die.net/man/2/dup3
[4] https://linux.die.net/man/2/accept4
[5] https://bugs.busybox.net/show_bug.cgi?id=11576

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

nettle: fix build with gcc 4.7

Fixes:
 - http://autobuild.buildroot.org/results/69226d42e9a483aaff44fb3f468b4724415e71f6

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/wavemon: bump to version 0.9.0

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gst1-plugins-bad: fix build with fdk-aac 2.0

Fixes:
http://autobuild.buildroot.net/results/343/343249ab34ab77be3b8077f544b9d1e2d4852796/
http://autobuild.buildroot.net/results/edc/edca961f2c4d1946385ac86a756308caaf22d79d/

Fdk-aac 2.0 dropped some legacy APIs, breaking the build of the fdk-aac
plugin.  Add two upstream upstream patches to fix building against fdk-aac
2.0.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/llvm: set the path to llvm-config

While building llvm for the target (x86_64), the build failed due to
path poisoning (-I/usr/include/libxml2) while building NATIVE tools
(i.e for the host). The llvm package tries to build a tool for the host
with the cross-compiler which doesn't work when the paranoid toolchain
wrapper (BR2_COMPILER_PARANOID_UNSAFE_PATH) is enabled.

We know that llvm (target) needs llvm-tablegen and llvm-config built by
host-llvm, but only LLVM_TABLEGEN is provided by llvm.mk. Adding
LLVM_CONFIG_PATH=$(HOST_DIR)/bin/llvm-config for llvm (target)
fixes the path poisoining issue since llvm doesn't build the NATIVE
variant.

Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Valentin Korenblit <valentinkorenblit@gmail.com>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libva-utils: drop _SOURCE variable which has the default value

Since commit b0907949261ef5e8179c027c086903f30417dd66
("package/libva-utils: bump to version 2.3.0"), the LIBVA_UTILS_SOURCE
variable has the default value of the <pkg>_SOURCE variable, so
check-package complains:

package/libva-utils/libva-utils.mk:8: remove default value of _SOURCE variable (http://nightly.buildroot.org/#generic-package-reference)

Let's fix this by dropping the now unneeded variable assignment.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

linux: use HOSTCC_NOCCACHE as kconfig HOSTCC

linux is a bit different than other kconfig-package, because it has
"toolchain" in KCONFIG_DEPENDENCIES. Thanks to this, host-ccache *is*
ready by the time kconfig invocations are made, so we could use
$(HOSTCC) as the host compiler for kconfig related operations.

However, for consistency with other kconfig-package packages, we chose
to use $(HOSTCC_NOCCACHE) as well.

We cannot rely on the default value of HOSTCC passed by the
kconfig-package infrastructure, because $(LINUX_MAKE_FLAGS) also
contains a HOSTCC definition that would override the one passed by the
kconfig-package infrastructure.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

boot/uboot: use HOSTCC_NOCCACHE as kconfig HOSTCC

At kconfig time, dependencies are not built, and therefore host-ccache
is not ready. Due to this, using $(HOSTCC) as the host compiler in
KCONFIG_OPTS does not work: a "make uboot-menuconfig" invocation from
a clean tree with ccache enabled fails.

This commit fixes this by using $(HOSTCC_NOCCACHE). We cannot rely on
the default value of HOSTCC passed by the kconfig-package
infrastructure, because $(UBOOT_MAKE_OPTS) also contains a HOSTCC
definition that would override the one passed by the kconfig-package
infrastructure.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/pkg-kconfig: pass HOSTCC during kconfig steps

The kconfig build logic uses the HOSTCC variable to find the host
compiler. It makes sense to explicitly pass a value to this variable,
pointing to the host compiler used by Buildroot.

During the kconfig step, host-ccache is not ready (host-ccache is only
a dependency to the configure step of packages), so we use
$(HOSTCC_NOCCACHE).

Packages currently using the kconfig-package fell into two categories:

 - Those not passing any HOSTCC value. For such packages, it was the
   default host compiler detected by the kconfig build logic that was
   used. ccache was therefore never used. With this commit, those
   packages will now be using the host compiler detected by
   Buildroot. Packages in this situation: at91bootstrap3, barebox,
   busybox, swupdate, uclibc, xvisor.

 - Those passing a HOSTCC value. Such packages were passing $(HOSTCC),
   which doesn't work as host-ccache will not be ready. This commit
   does not fix them, as they still override HOSTCC. It will be fixed
   in followup commits. Packages in this situation: uboot and
   linux. Note that linux was a bit special, because it has a
   KCONFIG_DEPENDENCIES on the toolchain package, so in fact
   host-ccache was ready.

So practically speaking, this commit does not fix anything, as the two
only problematic packages that use $(HOSTCC) are not fixed. However,
it makes things more correct by explicitly telling kconfig which
compiler to use.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

infra/pkg-cmake: use an obviously-invalid value for CMAKE_SYSTEM_VERSION

In 36568732e4, we expanded toolchain.cmake to also define the value for
CMAKE_SYSTEM_VERSION, as the cmake documentation states that it must be
manually defined when doing cross-compilation [0]:

    When the CMAKE_SYSTEM_NAME variable is set explicitly to enable
    cross compiling then the value of CMAKE_SYSTEM_VERSION must also
    be set explicitly to specify the target system version.

However, the fix in 36568732e4 uses the version of the kernel headers,
assuming that would be the oldest kernel we could run on. Yet, this is
not the case, because glibc (for example) has fallbacks to support
running on kernels older than the headers it was built against.

The cmake official wiki [1] additionally states:

  * CMAKE_SYSTEM_VERSION : optional, version of your target system, not
    used very much.

Folllowed a little bit below, by:

  * CMAKE_TOOLCHAIN_FILE : absolute or relative path to a cmake script
    which sets up all the toolchain related variables mentioned above

    For instance for crosscompiling from Linux to Embedded Linux on PowerPC
    this file could look like this:

        # this one is important
        SET(CMAKE_SYSTEM_NAME Linux)
        #this one not so much
        SET(CMAKE_SYSTEM_VERSION 1)

    [...]

Furthermore, using the kernel headers version can be a bit misleading (as
it really looks like is is the correct version to use when it is not),
while it is obvious that 1 is not really the output of `uname -r` and
thus is definitely not misleading.

Finally, random searches [2] about CMAKE_SYSTEM_VERSION, mostly only
turns up issues related with Windows, Mac-OS, and to a lesser extent,
Android (where it is forcibly set to 1), with issues realted to running
under just Linux (as opposed to Adnroid) mostly non-existent.

Consequently, we revert to using the value that is suggested in the
cmake WiKi, i.e. 1, and which is basically what we also used as a
workaround in the azure-iot-sdk-c paclkage up until d300b1d3b1.

A case were we will need to have a real kernel version, is if we one day
have a cmake-based pacakge that builds and installs a kernel module [3],
because it will need the _running_ kernel version to install it in
/lib/modules/VERSION/, but in that case it will anyway most probably
not be the headers version.

[0] https://cmake.org/cmake/help/v3.8/variable/CMAKE_SYSTEM_VERSION.html
[1] https://gitlab.kitware.com/cmake/community/wikis/doc/cmake/CrossCompiling
[2] https://duckduckgo.com/?q=CMAKE_SYSTEM_VERSION
[3] https://stackoverflow.com/questions/38205745/cmake-system-version-not-updated-for-new-kernel

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

check-package: fix Python3 support

This script currently uses "/usr/bin/env python" as shebang but it does
not really support Python3. Instead of limiting the script to Python2,
fix it to support both versions.

So change all imports to absolute imports because Python3 follows PEP328
and dropped implicit relative imports.

In order to avoid errors when decoding files with the default 'utf-8'
codec, use errors="surrogateescape" when opening files, the docs for
open() states: "This is useful for processing files in an unknown
encoding.". This argument is not compatible with Python2 open() so
import 'six' to use it only when running in Python3.
As a consequence the file handler becomes explicit, so use it to close()
the file after it got processed.

This "surrogateescape" is a simple alternative to the complete solution
of opening files with "rb" and changing all functions in the lib*.py
files to use bytes objects instead of strings. The only case we can have
non-ascii/non-utf-8 files being checked by the script are for patch
files when the upstream file to be patched is not ascii or utf-8. There
is currently one case in the tree:
package/urg/0002-urg-gcc6-fix-narrowing-conversion.patch.

Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Tested-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/supertux: needs gcc >= 6

The initial build issue [1] has been fixed upstream but the supertux
fail to link with boost libraries when using gcc 5 (which use C++11 by default):

libsupertux2_lib.a(main.cpp.o): In function `boost::system::error_category::std_category::equivalent(std::error_code const&, int) const':
main.cpp:(.text._ZNK5boost6system14error_category12std_category10equivalentERKSt10error_codei[_ZNK5boost6system14error_category12std_category10equivalentERKSt10error_codei]+0x32): undefined reference to `boost::system::detail::generic_category_instance'
main.cpp:(.text._ZNK5boost6system14error_category12std_category10equivalentERKSt10error_codei[_ZNK5boost6system14error_category12std_category10equivalentERKSt10error_codei]+0x47): undefined reference to `boost::system::detail::generic_category_instance'
main.cpp:(.text._ZNK5boost6system14error_category12std_category10equivalentERKSt10error_codei[_ZNK5boost6system14error_category12std_category10equivalentERKSt10error_codei]+0x99): undefined reference to `boost::system::detail::generic_category_instance'
libsupertux2_lib.a(main.cpp.o): In function `boost::system::error_category::std_category::equivalent(int, std::error_condition const&) const':
main.cpp:(.text._ZNK5boost6system14error_category12std_category10equivalentEiRKSt15error_condition[_ZNK5boost6system14error_category12std_category10equivalentEiRKSt15error_condition]+0x33): undefined reference to `boost::system::detail::generic_category_instance'
main.cpp:(.text._ZNK5boost6system14error_category12std_category10equivalentEiRKSt15error_condition[_ZNK5boost6system14error_category12std_category10equivalentEiRKSt15error_condition]+0x48): undefined reference to `boost::system::detail::generic_category_instance'
collect2: error: ld returned 1 exit status

This is a similar issue as the one reported by [2].

With gcc 5, boost libraries are compiled using C++11 but
supertux2_lib.a is using C++14 standard.

To fix the issue, boost libraries should be build using C++14
standard but we currently don't have an option to "force" the
default C++ standard used by the compiler.

So bump the minimum gcc version to gcc 6 since the C++14 is
used by default.

[1] https://github.com/SuperTux/supertux/issues/1014
[2] https://github.com/boostorg/system/issues/26

Fixes:
http://autobuild.buildroot.net/results/5b4/5b452c155917d783b3d8167fde48c2c938a74b95

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libva-utils: bump to version 2.3.0

Have to add a workaround since upstream didn't package this release
properly.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libva-intel-driver: bump to version 2.3.0

Remove patch to fix build without stack-protector support which is upstream.
Add backported patch to fix libva-intel-driver when using wayland.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libva: backport Add pointer to struct wl_interface for driver to use

This is needed by libva-intel-driver when using wayland.

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/linux-firmware : Install binary blobs for e100 ethernet driver

Add an option in the menuconfig  submenu of linux-firmware package. Install
the firmware binary files to the target directory if the option is selected.

Signed-off-by: David Picard <dplamp@gmx.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/cryptsetup: bump to version 2.0.6

Cc: Martin Hicks <mort@bork.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gnutls: bump to version 3.6.5

- libidn1 support removed since version 3.6.0 and
  https://github.com/gnutls/gnutls/commit/abe6a12b9766219163f99d7807a0b07fbe5f590c
- libz support has been removed since version 3.6.0 and
  https://github.com/gnutls/gnutls/commit/1b3ece44acaa25c149659a6878d2be807a282f02

This bump also fix build issues of gnutls tests and applications such
as ffmpeg or cups due to the fact that _idn2_punycode_* functions are
not exposed anymore since libidn2 bump to version 2.1.0 and:
https://github.com/libidn/libidn2/commit/1d1f2e5babe6032eb0fe4d451afee2e277b8419f

Fixes:
 - http://autobuild.buildroot.org/results/f8c38ea6ebbb78269d620d19d760a0566f742640
 - http://autobuild.buildroot.org/results/8dc5b4212b1d8d0bf5bd5e8a27eb02753dc678e4
 - http://autobuild.buildroot.org/results/53f5bcd9010c841838f51d65427d9a97ef35e08c

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

nettle: bump to version 3.4.1

nettle 3.4.1 is a requirement for gnutls 3.6.5

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gnutls: remove unrecognized --with-libnettle-prefix

configure: WARNING: unrecognized options: --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --with-libnettle-prefix

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

minizip: depends on wchar

minizip depends on wchar since version 2.7.0 and
https://github.com/nmoinvaz/minizip/commit/21a3102db475e662aabedc7b191e5732734847ec

Fixes:
 - http://autobuild.buildroot.org/results/2e83b694b91fe96e1a044385d327d7abd2183e24

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/lz4: bump to version 1.8.3

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/wolfssl: security bump to version 3.5.17

From the release notes:

This release of wolfSSL includes a fix for 1 security vulnerability.

Medium level fix for potential cache attack with a variant of
Bleichenbacher’s attack.  Earlier versions of wolfSSL leaked PKCS #1 v1.5
padding information during private key decryption that could lead to a
potential padding oracle attack.  It is recommended that users update to the
latest version of wolfSSL if they have RSA cipher suites enabled and have
the potential for malicious software to be ran on the same system that is
performing RSA operations.  Users that have only ECC cipher suites enabled
and are not performing RSA PKCS #1 v1.5 Decryption operations are not
vulnerable.  Also users with TLS 1.3 only connections are not vulnerable to
this attack.  Thanks to Eyal Ronen (Weizmann Institute), Robert Gillham
(University of Adelaide), Daniel Genkin (University of Michigan), Adi Shamir
(Weizmann Institute), David Wong (NCC Group), and Yuval Yarom (University of
Adelaide and Data61) for the report.

The paper for further reading on the attack details can be found at
http://cat.eyalro.net/cat.pdf

Drop now upstreamed patch.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

minizip: bump to version 2.8.2

- libbsd is now an optional dependency as HAVE_ARC4RANDOM_BUF is not
  always defined since version 2.7.1 and:
  https://github.com/nmoinvaz/minizip/commit/c73ef6e69b320349604c620bc429c461de8659af
- openssl is an optional dependency since version 2.7.0 and:
  https://github.com/nmoinvaz/minizip/commit/e5a5617a7c765858c1ed6fb0d40b6a750ff10131
- libiconv is an optional dependency since version 2.7.1 and:
  https://github.com/nmoinvaz/minizip/commit/6209991d6be5b070fb92d2aca6ed668c3db0829f

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libserial: fix build on sparc

On certain architectures (namely Sparc), the maximum baud rate exposed
by the kernel headers is B2000000. Therefore, the current libserial
code doesn't build for the Sparc and Sparc64 architectures due to
this.

In order to address this problem, this patch tests the value of
__MAX_BAUD. If it's higher than B2000000 then we assume we're on an
architecture that supports all baud rates up to B4000000. Otherwise,
we simply don't support the baud rates above B2000000.

Fixes build failures such as:

SerialPort.cpp: In member function 'int LibSerial::SerialPort::Implementation::GetBitRate(const LibSerial::BaudRate&) const':
SerialPort.cpp:1226:14: error: 'BAUD_2000000' is not a member of 'LibSerial::BaudRate'
         case BaudRate::BAUD_2000000:

Fixes:
 - http://autobuild.buildroot.org/results/63ba95b6786464fa8e75af64593010df84530079

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/olimex_a20_olinuxino_lime*: bump Linux and U-Boot versions

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tpm2-abrmd: S80tpm2-abrmd: create pid file at startup

The start-stop-daemon invocation to start abrmd was missing the -m (make
pidfile) option, causing stop to fail.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tpm2-abrmd: fix build with BR2_FORTIFY_SOURCE_1

The configure script passes -U FORTIFY_SOURCE -D FORTIFY_SOURCE=2 by
default, which conflicts with BR2_FORTIFY_SOURCE_1 as -Werror is used:

<cross>-gcc ..  -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 .. -D_FORTIFY_SOURCE=1
<command-line>:0:0: error: "_FORTIFY_SOURCE" redefined [-Werror]

Disable this so the FORTIFY_SOURCE flags in TARGET_CFLAGS (if any) is used
instead.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tpm2-abrmd: do not enforce -fstack-protector-all

Stack protection is now controlled Buildroot wide with the BR2_SSP_*
options, so disable the explicit -fstack-protector-all so the SSP logic in
the toolchain wrapper is used instead.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tpm2-tools: always disable hardening options

Building with --enable-hardening (the default), forces -fstack-protector-all
/ FORTIFY_SOURCE=2.  These options are now controlled Buildroot wide with
the BR2_SSP_* / BR2_FORTIFY_SOURCE_* options.  Disable hardening so the
ssp/fortify settings in the toolchain wrapper / CFLAGS is used instead.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tpm2-tss: fix build with BR2_FORTIFY_SOURCE_1

The configure script passes -U FORTIFY_SOURCE -D FORTIFY_SOURCE=2 by
default, which conflicts with BR2_FORTIFY_SOURCE_1 as -Werror is used:

<cross>-gcc ..  -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 .. -D_FORTIFY_SOURCE=1
<command-line>:0:0: error: "_FORTIFY_SOURCE" redefined [-Werror]

Disable this so the FORTIFY_SOURCE flags in TARGET_CFLAGS (if any) is used
instead.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tpm2-tss: do not enforce -fstack-protector-all

Stack protection is now controlled buildroot wide with the BR2_SSP_*
options, so disable the explicit -fstack-protector-all so the SSP logic in
the toolchain wrapper is used instead.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/systemd: add upstream fix for CVE-2018-16865

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/systemd: add upstream fix for CVE-2018-16864

Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/glib-networking: bump to 2.58.0

In 2.56.1 (when tested in a namespace sandbox that restricted what
the build could see on the host system), it was discovered that the
glib-networking build would check in /etc for the Certificate Authority
files. The newer version of this package no longer tests the build time
location of the Certificate Authority and resolves these build failures.

Fixes:
http://autobuild.buildroot.net/results/8f8/8f83be0c21c21c07d5a7330f3626b739b1970625
(and others http://autobuild.buildroot.net/?reason=glib-networking-2.56.1)

Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/dash: Create $(TARGET_DIR)/bin before install

The build fails because $(TARGET_DIR)/bin folder may not exist if for
example to use the following defconfig:

BR2_x86_64=y
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y
BR2_SYSTEM_BIN_SH_DASH=y
BR2_TARGET_GENERIC_GETTY_PORT="tty1"
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux.config"
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
BR2_PACKAGE_S6_LINUX_INIT=y
BR2_TARGET_ROOTFS_EXT2=y

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
[Peter: use install -D]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sunxi-cedarx: needs -fPIC

Fixes:
 - http://autobuild.buildroot.org/results/c17062e1558f26c2db837883a0c33ef39dd031a2

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/rtc-tools: new package

This package contains a set of tools to manipulate RTC devices. They
are written and maintained by the RTC subsystem Linux kernel
maintainer, Alexandre Belloni.

Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/python-setuptools: add comment about python3-setuptools

As suggested by Arnout, add a comment to indicate that the version of
python-setuptools must be kept in sync with python3-setuptools.

Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/manual: standardize a bit more the formatting of commit titles

Currently, our commit titles are not very well standardized, and it
would be great to standardize them a little bit more. A number of
people use "<pkg>: " as prefix, others use "package/<pkg>: ". Some
people start the rest of the commit title (after the prefix) with an
upper-case letter, some with a lower-case letter.

In an attempt to standardize this, this commit updates the manual with
some examples of good commit titles.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Carlos Santos <casantos@datacom.com.br>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gnupg2: security bump to version 2.2.12

Fixes CVE-2018-1000858: Cross Site Request Forgery with arbitrary HTTPS
GET requests via HTTP redirect.

https://sektioneins.de/en/advisories/advisory-012018-gnupg-wkd.html

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libassuan: bump to version 2.5.2

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libgpg-error: bump to version 1.33

The syscfg header name is now based on the target triplet, with the
vendor part set to "unknown". The symlink approach no longer works since
we use "buildroot" for the vendor part. Override the target host
configure parameter to match the build system expectation.

The x86 header vendor part has been renamed to "unknown" as well.
Account for that in BR2_PACKAGE_LIBGPG_ERROR_SYSCFG.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

whois: bump to version 5.4.0

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libidn2: bump to version 2.1.0

Update hash for COPYING because a typo was fixed:
https://gitlab.com/libidn/libidn2/commit/de46ee648a56a87904ff42590064289c1f984e23

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ccache: bump to version 3.6

License update - a year bump.

Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/openpowerlink: bump to version 2.7.1

Remove upstream patch.
While at it, switch to https.

Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/ltp-testsuite: drop AUTORECONF = YES

Patch 0002-statx-fix-compile-errors.patch has been dropped, so autoreconf is
no longer needed.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ltp: Bump version 20190115

Drop statx patch as it's included in this release.

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/grep: bump to version 3.3

Update license file hash; URLs changed from http to https.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

syslog-ng: fix build on m68k with uclibc

uclibc on m68k defines pthread_spinlock_t but does not define
pthread_spin_trylock so check for this function before using it

Fixes:
 - http://autobuild.buildroot.org/results/0a6de11c030a4f39e402917809fc6d33fb463d1b

Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libinput: drop C++ dependency

The meson C++ dependency is only used for a build-time header
inclusion test, add patch dropping hard meson C++ dependency
and build the header inclusion test only in case C++ compiler
is available.

Fixes [1]:

  The Meson build system
  Version: 0.49.0
  Source dir: .../build/libinput-1.12.5
  Build dir: .../build/libinput-1.12.5/build
  Build type: cross build
  Project name: libinput
  Project version: 1.12.5
  Native C compiler: cc (gcc 4.8.4 "cc (Ubuntu 4.8.4-2ubuntu1~14.04.4) 4.8.4")
  Cross C compiler: .../host/bin/riscv64-buildroot-linux-gnu-gcc (gcc 7.4.0)

  meson.build:1:0: ERROR:  Unknown compiler(s): [['.../host/bin/riscv64-buildroot-linux-gnu-g++']]
  The follow exceptions were encountered:
  Running ".../host/bin/riscv64-buildroot-linux-gnu-g++ --version" gave "[Errno 2] No such file or directory: '.../host/bin/riscv64-buildroot-linux-gnu-g++': '.../host/bin/riscv64-buildroot-linux-gnu-g++'"

[1] http://autobuild.buildroot.net/results/bf4d3d360f635c3524a52b84a72d558770596ed0

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/openssh: add upstream security fix

Fixes CVE-2018-20685: The scp client allows server to modify permissions
of the target directory by using empty ("D0777 0 \n") or dot ("D0777 0
.\n") directory name.

The bug reporter lists a number of related vulnerabilities that are not
fixed yet:

  https://sintonen.fi/advisories/scp-client-multiple-vulnerabilities.txt

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>