lima/gpir: Do all lowerings before rsched

The scheduler assumes that load nodes are always duplicated so that they
can always be scheduled eventually and therefore they never need to be
spilled. But some lowerings were running after the pre-RA scheduler,
whereas duplication has to happen before then since it's needed for the
scheduler to do a better job reducing register pressure. This meant
that lowerings were introducing multiple uses of a load instruction,
which broke the scheduler's expectation and resulted in infinite loops
in situations where the only nodes available to spill were load nodes.
Spilling load nodes would be silly, so we want to fix the lowerings
rather than the scheduler. Just do all lowerings before the pre-RA
scheduler, which also helps with reducing pressure since the scheduler
can more accurately compute the pressure.

Fixes lima/mesa#104.

Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com>

android: anv: libmesa_vulkan_common: add libmesa_util static dependency

Change needed to fix the following building error:

In file included from external/mesa/src/intel/vulkan/anv_device.c:43:
external/mesa/src/util/xmlpool.h:115:10: fatal error: 'xmlpool/options.h' file not found
         ^~~~~~~~~~~~~~~~~~~
1 error generated.

Fixes: 4dcb1ff ("anv: add support for driconf")
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>

panfrost: Rename pan_bo_cache.c into pan_bo.c

So we can move all the BO logic into this file instead of having it
spread over pan_resource.c, pan_drm.c and pan_bo_cache.c.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost: Get rid of the now unused SLAB allocator

The last users have been converted to use plain BOs. Let's get rid of
this abstraction. We can always consider adding it back if we need it
at some point.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost: Get rid of unused panfrost_context fields

Some fields in panfrost_context are unused (probably leftovers from
previous refactor). Let's get rid of them.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost: Convert ctx->{scratchpad, tiler_heap, tiler_dummy} to plain BOs

ctx->{scratchpad,tiler_heap,tiler_dummy} are allocated using
panfrost_drm_allocate_slab() but they never any of the SLAB-based
allocation logic. Let's convert those fields to plain BOs.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost: Make transient allocation rely on the BO cache

Right now, the transient memory allocator implements its own BO caching
mechanism, which is not really needed since we already have a generic
BO cache. Let's simplify things a bit.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost: Stop passing a ctx to functions being passed a batch

The context can be retrieved from batch->ctx.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost: Pass a batch to panfrost_drm_submit_vs_fs_batch()

Given the function name it makes more sense to pass it a job batch
directly.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

panfrost: s/job/batch/

What we currently call a job is actually a batch containing several jobs
all attached to a rendering operation targeting a specific FBO.

Let's rename structs, functions, variables and fields to reflect this
fact.

Suggested-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

egl: Add GL_MESA_EGL_sync support

This commit follow OES_EGL_sync to universially enable use of EGL sync
objects with desktop OpenGL contexts.

Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

headers: Add GL_MESA_EGL_sync token to GL

Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

registry: update gl.xml with GL_MESA_EGL_sync token

As added by upstream GL registry changes

Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

specs: Add GL_MESA_EGL_sync

Adds GL_MESA_EGL_sync as defined in upstream OpenGL registry

Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

android: fix linking issues with liblog

Fixes Android build errors observed in Intel CI.

Fixes: f9f7cbc1aa3 "util: android logging support"
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>

iris: Support the disable_throttling=true driconf option.

nir/dead_cf: Repair SSA if the pass makes progress

The dead_cf pass calls into the CF manipulation helpers which attempt to
keep NIR's SSA form sane.  However, when the only break is removed from
a loop, dominance gets messed up anyway because the CF SSA clean-up code
only looks at phis and doesn't consider the case of code becoming
unreachable.  One solution to this would be to put the loop into LCSSA
form before we modify any of its contents.  Another (and the approach
taken by this pass) is to just run the repair_ssa pass afterwards
because the CF manipulation helpers are smart enough to keep all the
use/def stuff sane; they just don't always preserve dominance
properties.

While we're here, we clean up some bogus indentation.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111405
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111069
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

nir/repair_ssa: Insert deref casts when needed

Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

nir/repair_ssa: Repair dominance for unreachable blocks

NIR currently assumes that unreachable blocks are trivially dominated by
everything.  However, when considering well-formed SSA, there is no path
from any block to an unreachable block.  Therefore, we can break any
use-def chains where the use is in an unreachable block.  This removes
any dependencies on code created by uses in unreachable blocks and lets
DCE do a better job of cleaning it up.

Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

nir: Add a block_is_unreachable helper

Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

nir: Don't infinitely recurse in lower_ssa_defs_to_regs_block

Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

nir: Handle complex derefs in nir_split_array_vars

We already bail and don't split the vars but we were passing a NULL to
_mesa_hash_table_search which is not allowed.

Fixes: f1cb3348f1 "nir/split_vars: Properly bail in the presence of ..."
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>

intel/blorp: Use wide formats for nicely aligned stencil clears

In the case where the stencil clear is nicely aligned, we can clear
stencil much more efficiently by mapping it as a wide format (say
RGBA32_UINT) and blasting out the stencil clear value with a repclear.
On Unigine Heaven, this makes one stencil clear go from non-trivial to
unnoticeable when looking at per-draw timings.

In order for this change to work properly, ANV needs to do a bit more
flushing around depth and stencil clears.  i965 and iris already have
the cache tracking logic to handle this so no changes are required
there.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

intel/blorp: Expose surf_fake_interleaved_msaa internally

intel/blorp: Expose surf_retile_w_to_y internally

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

blorp: Memset surface info to zero when initializing it

This isn't known to fix any current bugs but it does prevent a
regression in a subsequent commit.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

intel/tools: Decode PS kernels on SNB

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

intel/tools: Decode 3DSTATE_BINDING_TABLE_POINTERS on SNB

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

nir/lower_io_to_vector: don't merge compact varyings

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Fixes: 02bc4aabb48 ('nir/lower_io_to_vector: allow FS outputs to be vectorized')
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

drirc: override minImageCount=2 for gfxbench

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110765
Fixes: 4689e98fe884d9412b72 ("vulkan/wsi: Set X11 minImageCount to 3.")
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Eero Tamminen <eero.t.tamminen@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

radv: add support for vk_x11_override_min_image_count

Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

amd: move adaptive sync to performance section, as it is defined in xmlpool

Fixes: 3844ed8d44677588bc29 ("radv: Add adaptive_sync driconfig option and enable it by default.")
Fixes: e260493f2ab2483e5a55 ("radeonsi: Enable adaptive_sync by default for radeon")
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: add support for vk_x11_override_min_image_count

Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

wsi: add minImageCount override

Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> (v1)
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: add support for driconf

No option is supported yet, this is just the boilerplate.

Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

gallivm: drop LLVM<3.3 code paths as no build system allows that

Suggested-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>

meson/scons/android: drop now-unused HAVE_LLVM

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>

llvmpipe: replace more complex 3.x version check with LLVM_VERSION_MAJOR/MINOR

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>

clover: replace more complex 3.x version check with LLVM_VERSION_MAJOR/MINOR

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>

gallivm: replace more complex 3.x version check with LLVM_VERSION_MAJOR/MINOR

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>

clover: replace major llvm version checks with LLVM_VERSION_MAJOR

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>

gallivm: replace major llvm version checks with LLVM_VERSION_MAJOR

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>

swr: replace major llvm version checks with LLVM_VERSION_MAJOR

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>

amd: replace major llvm version checks with LLVM_VERSION_MAJOR

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>

svga: replace binary HAVE_LLVM checks with LLVM_AVAILABLE

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>

r600: replace binary HAVE_LLVM checks with LLVM_AVAILABLE

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>

aux/draw: replace binary HAVE_LLVM checks with LLVM_AVAILABLE

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>

meson/scons/android: add LLVM_AVAILABLE binary flag

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>

gallivm: replace `0x` version print with actual version string

Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Acked-by: Michel Dänzer <mdaenzer@redhat.com>

anv,iris: L3ALLOC register replaces L3CNTLREG for gen12

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

intel/gen12: Add L3 configurations

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

util: include u_endian.h in u_math.h

u_endian.h needs to be included, otherwise PIPE_ARCH_BIG_ENDIAN might not
be defined on big-endian architectures and the endian conversion macros
will be incorrect.

I don't think anything is broken because of this, I just noticed this when
looking at the file.

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

anv: Bump maxComputeWorkgroupSize

Fixes: 9a129510f56f "anv: Bump maxComputeWorkgroupInvocations"
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111552
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

intel: Stop redirecting state cache to command streamer cache section

This bit redirects the state cache from the unified/RO sections of the
L3 cache to the "CS command buffer" section of the cache, which would
be set up via TCCNTLREG.  The documentation says:

   "Additionaly, this redirection should be enabled only if there is a
    non-zero allocation for the CS command buffer section."

We don't allocate any cache to the CS command buffer section, so
enabling this redirection effectively disabled the state cache.
The Windows driver only sets up that section when using POSH, which
we do not currently use.  So, leave it unallocated and disable the
redirection to get a functional state cache again.

Improves performance in Civilization VI by 18%, Manhattan 3.0 by 6%,
and Car Chase by 2%.

iris: Invalidate state/texture/constant caches after STATE_BASE_ADDRESS

Jason pointed out that the caches likely refer to offsets from dynamic
and surface state base addresses, so when we change those, we need to
invalidate the caches.

Comment borrowed from src/intel/vulkan/genX_cmd_buffer.c.

freedreno/a6xx: Implement primitive count queries on GPU

The driver can't determine PIPE_QUERY_PRIMITIVES_GENERATED or
PIPE_QUERY_PRIMITIVES_EMITTED once we support geometry or
tessellation, since these stages add primitives at runtime.  Use the
WRITE_PRIMITIVE_COUNTS event to write back the primitive counts and
implement a hw query for this.

Reviewed-by: Rob Clark <robdclark@gmail.com>

freedreno/a6xx: Let the GPU track streamout offsets

The GPU writes out streamout offsets as it goes to the FLUSH_BASE
pointer.  We use that value with CP_MEM_TO_REG when appending to the
stream so that we don't have to track the offsets with the CPU in the
driver.  This ensures that streamout continues to work once we enable
geometry and tessellation shader stages that add geometry.

Reviewed-by: Rob Clark <robdclark@gmail.com>

llvmpipe: fix CALLOC vs. free mismatches

Should fix some issues we're seeing. And use REALLOC instead of realloc.

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

radv/gfx10: determine the number of vertices per primitive for TES

This doesn't fix anything known but it's correct now.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

nir/lower_io_to_vector: add flat mode

This has lower_io_to_vector try to turn variables into arrays of 4-sized
vectors when possible and fall back to the old approach when that isn't
possible.

This is so that lower_io_to_vector can guarantee that only one variable is
used for each fragment shader output.

v2: handle dual-source blending
v3: don't try to merge structs and non-32-bit types in get_flat_type()
v3: fix per-vertex inputs
v3: fix and cleanup location advancement in get_flat_type() and it's
    calling code
v4: prioritize the original mode over the flat mode
v4: don't create flat variables to merge only one variable
v5: don't skip an entire slot when encountering structs in the old mode

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

nir/lower_io_to_vector: allow FS outputs to be vectorized

v2: handle dual-source blending
v3: use a higher MAX_SLOTS

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

radv/gfx10: make use the output usage mask when exporting NGG GS params

It shouldn't matter much because output varyings should have been
compacted during NIR shader linking but it mirrors what the driver
does when emitting NGG GS vertex parameters.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv/gfx10: account for the subpass view for the NGG GS storage

If the fragment shader needs the layer index, we have to allocate
one more dword in the NGG GS storage. Found by inspection. This
doesn't fix anything known.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

panfrost/ci: Increase timeouts

Sometimes LAVA jobs will timeout due to transient issues, and the Gitlab
job will fail in that case. Increase the timeouts to reduce the
likeliness of that happening and reduce false positives.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>

panfrost/ci: Use special runner for LAVA jobs

So repositories don't need to be specially configured with a token to
access LAVA, store this token in a bind volume for a special runner.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>

panfrost/ci: Re-add support for armhf

Now that Volt supports armhf, build again images and submit to LAVA for
RK3288.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>

radv: calculate esgs_itemsize in the shader info pass

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: calculate the GSVS vertex size in the shader info pass

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: gather primitive ID in the shader info pass

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: gather layer in the shader info pass

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: gather viewport in the shader info pass

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: gather pointsize in the shader info pass

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: gather clip/cull distances in the shader info pass

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: move ac_fill_shader_info() to radv_nir_shader_info_pass()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: merge radv_shader_variant_info into radv_shader_info

Having two different structs is useless.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radeon: Fix mjpeg issue for ARCTURUS

ARCTURUS mjpeg is using direct register access.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Boyuan Zhang <boyuan.zhang@amd.com>

radeon/vcn: add RENOIR VCN decode support

It has same VCN2.x block as Navi1x

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Boyuan Zhang <boyuan.zhang@amd.com>

glsl: Fix unroll of do{} while(false) like loops

For loops which condition is false on the first iteration
iteration count was falsely calculated under the assumption
that loop's condition is true until it becomes false, meaning
it's true at least one time.
Now such loops are reported as having 0 iteration.

Similar to the fix e71fc7f2 done in NIR.

Fixes tests/shaders/glsl-fs-loop-while-false-02.shader_test

Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

tgsi_to_nir: Remove dependency on libglsl.

This commit removes the GLSL dependency in TTN by manually recording
the textures used and calling nir_lower_samplers
instead of its GL counterpart.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

nir: Carve out nir_lower_samplers from GLSL code.

Lowering samplers is needed to produce NIR that can actually be
consumed by some gallium drivers, so it doesn't make sense to
to keep it only in the GLSL code.

This commit introduces nir_lower_samplers to compiler/nir,
while maintains the GL-specific function too.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

radeonsi: Release storage for smda_uploads when the context is destroyed

This fixes a memory leak in the flush code:

Direct leak of 128 byte(s) in 1 object(s) allocated from:
    #0 in __interceptor_realloc .../gcc-8.3.0/libsanitizer/asan/asan_malloc_linux.cc:105
    #1 in si_buffer_do_flush_region src/gallium/drivers/radeonsi/si_buffer.c:573
    #2 in si_buffer_flush_region src/gallium/drivers/radeonsi/si_buffer.c:608
    #3 in si_buffer_flush_region src/gallium/drivers/radeonsi/si_buffer.c:597

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

android: mesa: revert "Enable asm unconditionally"

This patch partially reverts 20294dc ("mesa: Enable asm unconditionally, ...")

Android makefile build logic needs to disable assembler optimization
in 32bit builds to avoid text relocations for libglapi.so shared

Fixes the following build error with Android x86 32bit target:

[  0% 4/477] target SharedLib: libglapi (out/target/product/x86/obj/SHARED_LIBRARIES/libglapi_intermediates/LINKED/libglapi.so)
FAILED: out/target/product/x86/obj/SHARED_LIBRARIES/libglapi_intermediates/LINKED/libglapi.so
...
prebuilts/gcc/linux-x86/x86/x86_64-linux-android-4.9/x86_64-linux-android/bin/ld: warning: shared library text segment is not shareable
prebuilts/gcc/linux-x86/x86/x86_64-linux-android-4.9/x86_64-linux-android/bin/ld: error: treating warnings as errors
clang-6.0: error: linker command failed with exit code 1 (use -v to see invocation)

Fixes: 20294dc ("mesa: Enable asm unconditionally, now that gen_matypes is gone.")
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Acked-by: Eric Engestrom <eric@engestrom.ch>

radv/gfx10: always set ballot_mask_bits to 64

The codegen handles it and it adds the correct casts. This fixes
a bunch of LLVM validation errors when enabling Wave32 for compute.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

nir/lower_explicit_io: Handle 1 bit loads and stores

Load a 32-bit value then convert to 1-bit.  Convert 1-bit to 32-bit
value, then Store it.

These cases started to appear when we changed Anvil to use derefs for
shared memory.

v2: Use `bit_size` in a couple of places we were missing.  (Jason)
    Reassign `value` instead of `src[0]`.  (Jason)

Fixes: 024a46a4079 ("anv: use derefs for shared memory access")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

Revert "intel/fs: Move the scalar-region conversion to the generator."

This reverts commit c0504569eac5e5c305e9f0c240e248aca9d8891f.  Now that
we're doing interpolation lowering in NIR, we can continue to stride the
FS input registers directly in the brw_fs_nir code like we did before.
This fixes SIMD32 fragment shaders which broke because lower_simd_width
depended on the 0 stride to split PLN instructions correctly.

Reviewed-by: Francisco Jerez <currojerez@riseup.net>

intel/fs: Fix FB write inst groups

This commit does two things.  First, it simplifies the way we compute
the FB write group bit.  There's no reason to use a ternary because
inst->group / 16 can only be 0 or 1.  Second, it fixes an order-of-
operations bug where the ternary wasn't selecting between (1 << 11) and
0 but between (1 << 11) and 0 | brw_dp_write_desc(...).

Fixes: 0d9648416 "intel/compiler: Use generic SEND for Gen7+ FB writes"
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

lima/ppir: don't lower phis to scalar

Utgard PP is vec4 architecture, so lowering phis to scalars
increases instruction count and potentially interferes with
spilling.

Tested-by: Andreas Baierl <ichgeh@imkreisrum.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>

freedreno/a2xx: formats update

For render formats, update fd2_pipe2color to only work with HW supported
render formats, and remove the format whitelist is_format_supported. This
patch enables float render formats (which work).

For vertex/texture formats, use a generic function which translates using
the bitsize of the channels. Since we fake support for some vertex formats,
check for these in is_format_supported to avoid enabling them as sampler
formats.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@chromium.org>

freedreno/a2xx: fix depth gmem restore

Use fd_gmem_restore_format() to avoid trying to use unsupported Z24S8/Z16
render formats for gmem restore.

Also apply this change to gmem2mem so it doesn't depend on fd2_pipe2color
working with depth formats.

gmem2mem/mem2gmem also doesn't need to use the swap/swizzle, since dst/src
formats are the same.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@chromium.org>

freedreno/a2xx: implement polygon offset

Fixes failures in the following deqp tests:
dEQP-GLES2.functional.polygon_offset.*

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>

freedreno/a2xx: fix SRC_ALPHA_SATURATE for alpha blend function

Fixes failures in the following deqp tests:
dEQP-GLES2.functional.fragment_ops.*src_alpha_saturate*

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>

freedreno/a2xx: ir2: update register state in scalar insert

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@chromium.org>

freedreno/a2xx: ir2: fix incorrect instruction reordering

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@chromium.org>

freedreno/a2xx: ir2: check opcode on the right instruction in export cp

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>

freedreno/a2xx: ir2: fix saturate in cp

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>

freedreno/a2xx: ir2: set lower_fdph

The fdph opcode is not supported.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>

freedreno/a2xx: ir2: remove pointcoord y invert

Fixes the following deqp test:
dEQP-GLES2.functional.shaders.builtin_variable.pointcoord

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>

freedreno/a2xx: ir2: fix lowering of instructions after float lowering

Some instructions generated by int/bool float lowering need to be lowered
by opt_algebraic.

Fixes: 43dbd7d6
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>

lima/ppir: don't lower vector {b,f}csel to scalar if condition is scalar

Utgard PP has vector fcsel operation, but its condition is scalar. Add
filtering callback that checks whether {b,f}csel condition is not scalar
to lower {b,f}csel to scalar only in this case.

Reviewed-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>

nir: allow specifying filter callback in lower_alu_to_scalar

Set of opcodes doesn't have enough flexibility in certain cases. E.g.
Utgard PP has vector conditional select operation, but condition is always
scalar. Lowering all the vector selects to scalar increases instruction
number, so we need a way to filter only those ops that can't be handled
in hardware.

Reviewed-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>