squashfs: bump to fix RHEL 5 compilation error

Bump squashfs with one commit to fix a compilation error on the ancient RHEL
5 distribution.

Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libgpiod: bump version to v0.1.2

This is a small bug-fix release:
  - include <poll.h> instead of <sys/poll.h> in gpioset
  - fix a formatting issue in gpioinfo for chips with >100 GPIO lines
  - fix a bug when requesting both-edges event notifications

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

uclibc: allow to build aarch64 internal toolchain

uClibc-ng from 1.0.22 and up supports aarch64 architecture.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

uclibc: enable mips{32,64}r6 support

The config for ISA choice is removed for a long time as
the buildsystem does not pass -march=mips* to the compiler anymore.
For mips{32,64}r6 support NAN selection is required.

Tested with qemu mips32/mips64 defconfigs.

A small patch is required. Bug found while testing qemu defconfigs.

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

uclibc: update to 1.0.22

- fixes mips{32,64}r6 support
- adds experimental aarch64 support
- fixes syscalls with 6 arguments for x86
- removes PID caching and simplifies architecture specific code

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

tcpdump: security bump to version 4.9.0

Security fixes in this release (from the Debian changelog):

    + CVE-2016-7922: buffer overflow in print-ah.c:ah_print().
    + CVE-2016-7923: buffer overflow in print-arp.c:arp_print().
    + CVE-2016-7924: buffer overflow in print-atm.c:oam_print().
    + CVE-2016-7925: buffer overflow in print-sl.c:sl_if_print().
    + CVE-2016-7926: buffer overflow in print-ether.c:ethertype_print().
    + CVE-2016-7927: buffer overflow in print-802_11.c:ieee802_11_radio_print().
    + CVE-2016-7928: buffer overflow in print-ipcomp.c:ipcomp_print().
    + CVE-2016-7929: buffer overflow in print-juniper.c:juniper_parse_header().
    + CVE-2016-7930: buffer overflow in print-llc.c:llc_print().
    + CVE-2016-7931: buffer overflow in print-mpls.c:mpls_print().
    + CVE-2016-7932: buffer overflow in print-pim.c:pimv2_check_checksum().
    + CVE-2016-7933: buffer overflow in print-ppp.c:ppp_hdlc_if_print().
    + CVE-2016-7934: buffer overflow in print-udp.c:rtcp_print().
    + CVE-2016-7935: buffer overflow in print-udp.c:rtp_print().
    + CVE-2016-7936: buffer overflow in print-udp.c:udp_print().
    + CVE-2016-7937: buffer overflow in print-udp.c:vat_print().
    + CVE-2016-7938: integer overflow in print-zeromq.c:zmtp1_print_frame().
    + CVE-2016-7939: buffer overflow in print-gre.c, multiple functions.
    + CVE-2016-7940: buffer overflow in print-stp.c, multiple functions.
    + CVE-2016-7973: buffer overflow in print-atalk.c, multiple functions.
    + CVE-2016-7974: buffer overflow in print-ip.c, multiple functions.
    + CVE-2016-7975: buffer overflow in print-tcp.c:tcp_print().
    + CVE-2016-7983: buffer overflow in print-bootp.c:bootp_print().
    + CVE-2016-7984: buffer overflow in print-tftp.c:tftp_print().
    + CVE-2016-7985: buffer overflow in print-calm-fast.c:calm_fast_print().
    + CVE-2016-7986: buffer overflow in print-geonet.c, multiple functions.
    + CVE-2016-7992: buffer overflow in print-cip.c:cip_if_print().
    + CVE-2016-7993: a bug in util-print.c:relts_print() could cause a
      buffer overflow in multiple protocol parsers (DNS, DVMRP, HSRP, IGMP,
      lightweight resolver protocol, PIM).
    + CVE-2016-8574: buffer overflow in print-fr.c:frf15_print().
    + CVE-2016-8575: buffer overflow in print-fr.c:q933_print().
    + CVE-2017-5202: buffer overflow in print-isoclns.c:clnp_print().
    + CVE-2017-5203: buffer overflow in print-bootp.c:bootp_print().
    + CVE-2017-5204: buffer overflow in print-ip6.c:ip6_print().
    + CVE-2017-5205: buffer overflow in print-isakmp.c:ikev2_e_print().
    + CVE-2017-5341: buffer overflow in print-otv.c:otv_print().
    + CVE-2017-5342: a bug in multiple protocol parsers (Geneve, GRE, NSH,
      OTV, VXLAN and VXLAN GPE) could cause a buffer overflow in
      print-ether.c:ether_print().
    + CVE-2017-5482: buffer overflow in print-fr.c:q933_print().
    + CVE-2017-5483: buffer overflow in print-snmp.c:asn1_parse().
    + CVE-2017-5484: buffer overflow in print-atm.c:sig_print().
    + CVE-2017-5485: buffer overflow in addrtoname.c:lookup_nsap().
    + CVE-2017-5486: buffer overflow in print-isoclns.c:clnp_print().

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sepolgen: bump to version 2.6

Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dbus: remove init script status op

The status command calls the Upstart status utility which we don't have.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

python-pyzmq: bump to version 16.0.2

Updated the zmq version detection patch to apply cleanly on 16.0.2.

Added patch #2 to replace compile_and_run with compile_and_forget in the setup
code: this function is only used to check for the availability of "sys/un.h" and
we only need to compile the test code to make sure of that. This fixes the
cross-compilation.

Signed-off-by: Lionel Flandrin <lionel@svkt.org>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

core infra: make sure apply-patches is called with correct tar

Buildroot has a mechanism to detect a too-old or missing tar program on the
host machine, and builds a custom host-tar if needed. An example situation
is a RHEL5 host machine, where tar is knowingly too old.

The apply-patches script also employs tar, in case the patches come as an
archive. However, tar is called as 'tar' without any absolute path, and the
environment does not point in any way to the possibly custom tar. As a
result, the too-old-tar is called. A particular problem is the flag '-a'
which is missing on e.g. RHEL5.

Previously, this problem went unnoticed: tar would fail, but apply-patches
did not notice it, and the overall return code of the script was 'success'.
However, commit d5ae67b4 added 'set -e' to the script, causing any error to
halt execution of the script with an error.

Fix the problem by adding the Buildroot-built host tools to the PATH when
calling apply-patches.

Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

toolchain-external: remove stale references to (ARCH_)LIBC_A_LOCATION

The variables LIBC_A_LOCATION and ARCH_LIBC_A_LOCATION were killed in commit
646bd86908f7f995cdc2b95e0be381d97600f905 but the corresponding descriptions
were never removed.

Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

DEVELOPERS: update Thomas De Schampheleire

The originally added entries were based on 'last committer' heuristics, but
I do not particularly feel responsible for them.

Instead update the list with more appropriate entries.

Additionally, update my email address.

Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libcurl: optional verbose strings config

This patch enables a config to set --enable-verbose during the
configuration of libcurl.  The option is triggered by setting
BR2_PACKAGE_LIBCURL_VERBOSE.

Signed-off-by: Judd Meinders <judd.meinders@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

docs/website/sponsors.html: Google and Mind sponsors of FOSDEM 2017 meeting

This commit updates the sponsors page on our web site to indicate that
Google and Mind are sponsoring the Buildroot Developers Meeting at
FOSDEM 2017 in Brussels.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xkeyboard-config: bump version to 2.20

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/xutil_util-macros: bump version to 1.19.1

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xapp_xauth: bump version to 1.0.10

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xapp_xconsole: bump version to 1.0.7

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xproto_presentproto: bump version to 1.1

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xlib_libXi: bump version to 1.7.9

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xdriver_xf86-input-evdev: bump version to 2.10.5

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xdriver_xf86-video-qxl: bump version to 0.1.5

Removed all patches, applied upstream.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xdriver_xf86-video-r128: bump version to 6.10.2

Removed 0002-abi23.patch, applied upstream.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xdriver_xf86-video-savage: bump version to 2.3.9

Removed 0002-abi23.patch, applied upstream.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xdriver_xf86-video-trident: bump version to 1.3.8

Removed 0001-abi23.patch, applied upstream.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xdriver_xf86-video-glint: bump version to 1.2.9

Removed 0001-mbstring.patch & 0002-abi23.patch, applied upstream.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xdriver_xf86-video-nv: bump version to 2.1.21

Removed 0001-mibstore.patch & 0002-abi23.patch, applied upstream.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xdriver_xf86-video-siliconmotion: bump version to 1.7.9

Removed 0001-abi23.patch, applied upstream.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xdriver_xf86-video-mga: bump version to 1.6.5

Removed 0002-abi23.patch, applied upstream.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xdriver_xf86-video-sis: bump version to 0.10.9

Removed 0002-abi23.patch, applied upstream.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/x11r7/xdriver_xf86-video-tdfx: bump version to 1.4.7

Removed 0002-abi23.patch, applied upstream.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux-headers: bump 4.{4, 9}.x and 3.12 series

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

linux: bump default to version 4.9.7

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/{mesa3d, mesa3d-headers}: bump version to 13.0.4

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/imx6q-sabresd: Bump to 4.9.7 kernel

Kernel 4.9.7 has an important fix: a2104c7cd3b24c432 ("drm/atomic:
clear out fence when duplicating state"), which fixes a kernel
warning that triggers sometimes when starting/stopping ksmcube
application several times in a row.

So bump to this version.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

redis: security bump to version 3.2.7

Release notes:
  https://www.reddit.com/r/redis/comments/5r8wxn/redis_327_is_out_important_security_fixes_inside/

From the notes:
Upgrade urgency HIGH.

This release fixes important security and correctness issues.  It is
especially important to upgrade for Redis Cluster users and for users
running Redis in their laptop since a cross-scripting attack is fixed in
this release.

[Peter: extend description]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

imagemagick: security bump to version 7.0.4-6

Fixes an use of uninitialized data issue in MAT image format that may have
security impact:

https://github.com/ImageMagick/ImageMagick/issues/362

[Peter: extend commit message, mention (potential) security impact]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

cjson: security bump to version v1.2.1

Fixes a potential NULL pointer dereference in
cJSONUtils_InplaceDecodePointerString():

https://github.com/DaveGamble/cJSON/issues/96

[Peter: extend commit message, mention (potential) security impact]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

riemann-c-client: fix build on bfin

Fixes:
http://autobuild.buildroot.net/results/8de/8de7e533fed3c48fdbe164bc9286148e63494c8f/build-end.log
http://autobuild.buildroot.net/results/828/828a4e09cb14c33b021bd347394104ff8b6dba78/build-end.log
http://autobuild.buildroot.net/results/fc8/fc80326880fb19cd6fbd6c0073916373a52ef873/build-end.log

LD symbol versioning is not working on blackfin even though ld accepts the
--version-script argument, causing link errors, so disable it.

Notice: These autobuilder issues happened with an external fdpic toolchain,
but the issue also occurs with internal toolchain / binutils 2.27 and
fdpic/flat.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

log4cxx: fix build issue with gcc6+ on architectures with signed char

Fixes:
http://autobuild.buildroot.net/results/029/02946a75f478b1304896e7a0794bb6aa527e45c0/
http://autobuild.buildroot.net/results/14b/14b9cab834540a01c9c838ea579dc73e383f754a/
http://autobuild.buildroot.net/results/de8/de8f2b132084a10fbe8efb38c7b31adca4562852/

The source code contains a number of character constants > 127, which causes
build errors with gcc6+ on architectures where char is signed:

locationinfo.cpp:163:21: error: narrowing conversion of '237' from 'int' to 'char' inside { } [-Wnarrowing]

Fix it by adding an upstream patch adding explicit static_cast around these.
Also add a local patch to fix the test suite as this is not fixed upstream.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/qemu: bump to the latest kernel version

Also bump the pc samples since they're tied to the (base) qemu config.

Results table:

Defconfig               Kernel  Qemu            Network Status
--------------------------------------------------------------
aarch64_virt            4.9.6   2.6.0           YES     OK (3)
arm_versatile           4.9.6   2.5.0           YES     OK
arm_versatile_nommu     4.4.45  2.5.0           YES     OK
arm_vexpress            4.9.6   2.5.0           YES     OK
m68k_mcf5208            4.8.17  2.5.0           YES     OK (6)
m68k_q800               4.9.6   q800-v2.4.0     NO (2)  OK
microblazebe            4.9.6   2.5.0           YES     OK
microblazeel            4.9.6   2.5.0           YES     OK
mips32r2el_malta        4.9.6   2.5.0           YES     OK
mips32r2_malta          4.9.6   2.5.0           YES     OK
mips32r6el_malta        4.9.6   2.6.0           YES     OK (3)
mips32r6_malta          4.9.6   2.6.0           YES     OK (3)
mips64el_malta          4.9.6   2.5.0           YES     OK
mips64_malta            4.8.17  2.5.0           YES     OK (6)
mips64r6el_malta        4.9.6   2.7.0           YES     OK (3)(4)
mips64r6_malta          4.9.6   2.7.0           YES     OK (3)(4)
nios2-10m50             4.9.6   2.9.0           NO      OK
or1k                    4.9.6   2.5.0           NO      OK
ppc_g3beige             4.9.6   2.5.0           YES     OK
ppc_mpc8544ds           4.9.6   2.5.0           YES     OK
ppc_virtex_ml507        4.9.6   2.5.0           NO      OK
ppc64_pseries           4.9.6   2.5.0           YES     OK
sh4                     4.9.6   2.5.0           YES     OK
sh4eb                   4.9.6   2.5.0           NO (1)  OK
sparc_ss10              4.9.6   2.5.0           YES     OK
sparc64_sun4u           4.9.6   2.5.0           YES     OK
sparc_sun4u             4.9.6   2.5.0           YES     OK
x86                     4.9.6   2.5.0           YES     OK
x86_64                  4.9.6   2.5.0           YES     OK
xtensa_lx60             4.8.17  2.6.0           YES     OK (6)
xtensa_lx60_nommu       4.8.17  2.6.0           YES     OK (5)

(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Known to fail with qemu versions lower than 2.6.0
(4) - Might work with 2.6.0, but the cpu definition changed in 2.7.0
(5) - Kept back on 4.8.x series since 4.9.x fails to build
(6) - Kept back on 4.8.x series since 4.9.x fails to boot

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

log4cxx: update upstream URL

apache.linux-mirror.org now return NXDOMAIN, so use logging.apache.org
instead.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/imx6q-sabresd: Add new defconfig

Add imx6q-sabresd_defconfig which supports imx6q-sabresd board using
mainline U-Boot and mainline kernel.

Keep freescale_imx6qsabresd_defconfig for those who want to run U-Boot and
kernel versions from NXP.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

DEVELOPERS: add Marcin Niestroj to all Grinn boards

Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

board: add support for chiliBoard

Board support package includes:

 * Buildroot defconfig
 * Mainline Linux kernel v4.9.6
 * Mainline U-Boot (current HEAD revision is used, as board support
   patches are not in stable release yet)
 * genimage config to create sdcard image
 * Board readme.txt

[Peter: use http:// instead of git:// for u-boot]
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lcms2: add upstream security fix for CVE-2016-10165

An out-of-bounds read in cmstypes.c in Type_MLU_Read function was found,
leading to heap memory leak triggered by crafted ICC profile.

https://bugzilla.redhat.com/show_bug.cgi?id=1367357

Add upstream patch to fix it.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libsodium: bump to version 1.0.11

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

samba4: bump to version 4.5.5

Switch download URL to match the website and avoid issues.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

heimdal: disable parallel make

It still seems to suffer from issues. Fixes:
http://autobuild.buildroot.net/results/e21/e2176cb5adacdad14371d4828f13a1c23f0e18d5/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gst-omx: bump to version 1.10.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gst1-rtsp-server: bump to version 1.10.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gst1-validate: bump to version 1.10.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gst1-libav: bump to version 1.10.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gst1-plugins-ugly: bump to version 1.10.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gst1-plugins-bad: bump to version 1.10.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gst1-plugins-good: bump to version 1.10.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gst1-plugins-base: bump to version 1.10.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gstreamer1: bump to version 1.10.3

Drop upstream patch as well.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

hiredis: new package

Minimalistic C client for Redis >= 1.2

It is minimalistic because it just adds minimal support for
the protocol, but at the same time it uses a high level
printf-alike API in order to make it much higher level than
otherwise suggested by its minimal code base and the lack of
explicit bindings for every Redis command.

https://github.com/redis/hiredis

[Peter: use install -t / -D, fix arguments]
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lxc: install also in staging

Install also lxc in staging directory, this will be needed for the
incoming integration of lxd package. Moreover, other packages could
find useful to integrate with liblxc instead of using lxc-xxx binaries.

Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lxc: add optional dependency on gnutls

lxc can use gnutls for various checksumming so add a dependency on it if
package is selected

Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

git-crypt: new package

[Peter: git is a runtime dependency, use pkg-config for openssl
dependencies, use make install]
Signed-off-by: Francesco Negri <francesconegri@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

shared-mime-info: bump to version 1.8

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libxkbcommon: bump to version 0.7.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

squid: security bump to version 3.5.24

Fixes:
* Mitigate DoS attacks that use client-initiated SSL/TLS renegotiation.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

moarvm: bump to version 2017.01

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/upmpdcli: bump to version 1.2.12

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

syslog-ng: Bump version to v3.9.1

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lua: bump to version 5.3.4

[Peter: drop MESSAGE call]
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/pkgconf: variable pkgdatadir also needs sysroot prefixing, wayland patch III

Needed when wayland support is enabled in xserver_xorg-server.

This patch fixes the final build error:

Making all in xwayland
make[3]: Entering directory '/home/buildroot/br5/output/build/xserver_xorg-server-1.19.0/hw/xwayland'
make[3]: *** No rule to make target '/usr/share/wayland-protocols/unstable/relative-pointer/relative-pointer-unstable-v1.xml', needed by 'relative-pointer-unstable-v1-client-protocol.h'.  Stop.

when trying to build
http://autobuild.buildroot.net/results/cf0/cf026e9b18e86b9890341612050f4d166a7b822d/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

DEVELOPERS: add Ezequiel for rtl8723bs

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

rtl8723bs: new package

Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl-gdgraph: bump to version 1.54

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl-gd: bump to version 2.56

perl-gd now supplies a Build.PL, but this one is not cross-compilation
friendly. So, we still use Makefile.PL like in previous version by using
the new <pkg>_PREFER_INSTALLER variable.

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

pkg-perl: add PREFER_INSTALLER variable

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas: tweak documentation.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

iptables: bump to version 1.6.1

Also removed the 3 patches as they have been added into the latest
version.

Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
[Thomas: drop autoreconf, no longer needed.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/fbterm: Fix building against libiconv

Fixes
http://autobuild.buildroot.net/results/d5d/d5d9705eea16f07848a313d9c83f491569734c5d/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libasplib: Fix time.h include

Fixes
http://autobuild.buildroot.net/results/cc0/cc0b928ee24a526b7c82fd3f391e2be024a14578/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/sdl2_ttf: fix detection of OpenGL

Backport a opatch from upstream to preoperly detect OpenGL, add patch to
fix autoreconf.

Fixes:
    http://autobuild.buildroot.org/results/be9/be9d9d0d75dca62d9edb28c1e4d81f7f33b30ea8/
    http://autobuild.buildroot.org/results/db8/db87a00a7cd1f8d1627fa4a39a0f67e9328b2b0f/
    http://autobuild.buildroot.org/results/f45/f45a9588090c296c9c5ece2cbc71f8bb64bebf73/
    http://autobuild.buildroot.org/results/9cb/9cb669ab6760420421e3c907462b69fe36c46601/
    and many others...

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Thompson <peter.macleod.thompson@gmail.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5xmlpatterns: add examples license information

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5websockets: add examples license information

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5webchannel: add examples license information

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5enginio: add examples license information

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5connectivity: add examples license information

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qt5base: add examples license information

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/cbootimage: enable target variant

This allow bootloader modification online on Tegra-targets

Signed-off-by: Misha Komarovskiy <zombah@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

DEVELOPERS: add David Bachelart for the jsmn package

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

jsmn: new package

Signed-off-by: David Bachelart <david.bachelart@bbright.com>
[Thomas:
 - fix license, it's MIT, not BSD
 - use TARGET_CONFIGURE_OPTS instead of manually passing CC and AR
 - use full destination path
 - keep only sha256 hash
 - rewrap Config.in help text]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

efl: fix target package dependency on util-linux (libmount)

Use the correct variable (BR2_PACKAGE_EFL_UTIL_LINUX_LIBMOUNT) and do
not impose dependency on util-linux if not needed.

Signed-off-by: Gustavo Sverzut Barbieri <barbieri@profusion.mobi>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gcc: fix build on or1k without flex/bison on host

Similar to arc architecture this is required.

Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libdrm: bump version to 2.4.75

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

DEVELOPERS: add me to or1k, sort alphabetically

Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

janus-gateway: add dependency of streaming plugin on headers >= 3.9

Fixes:

  http://autobuild.buildroot.net/results/89005444f3dee9002881b5449cd137a32a286e27/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

janus-gateway: make voicemail plugin optional

Currently janus-gateway's voicemail plugin is only built if
libogg is selected, and even then there is no way to disable the plugin from
being built. This causes a example config file to be placed on
the target filing system that the user may not need or want, creates a 33K .so
file on the target directory, and janus will also generate a warning when
ran if the plugin does not have a matching configuration file setup by
the user, as it will not use the example config file by default.

This patch makes the voicemail plugin optional, removes the check for libogg,
adds libogg as a dependency to the voicemail plugin, and selects the libogg
package automatically when the user selects the plugin.

Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

janus-gateway: make video room plugin optional

Currently janus-gateway is built by default with the video room  plugin.
This causes a example config file to be placed on the target filing system
that the user may not need or want, creates a 47K .so
file on the target directory, and janus will also generate a warning when
ran if the plugin does not have a matching configuration file setup by
the user, as it will not use the example config file by default.

This patch makes the video room plugin optional.

Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

janus-gateway: make video call plugin optional

Currently janus-gateway is built by default with the video call plugin.
This causes a example config file to be placed on the target filing system
that the user may not need or want, creates a 47K .so
file on the target directory, and janus will also generate a warning when
ran if the plugin does not have a matching configuration file setup by
the user, as it will not use the example config file by default.

This patch makes the video call plugin optional.

Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

janus-gateway: make text room plugin optional

Currently janus-gateway is built by default with the text room plugin.
This causes a example config file to be placed on the target filing system
that the user may not need or want, creates a 63K .so
file on the target directory, and janus will also generate a warning when
ran if the plugin does not have a matching configuration file setup by
the user, as it will not use the example config file by default.

This patch makes the text room plugin optional.

Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

janus-gateway: make streaming plugin optional

Currently janus-gateway is built by default with the streaming plugin.
This causes a example config file to be placed on the target filing system
that the user may not need or want, creates a 133K .so
file on the target directory, and janus will also generate a warning when
ran if the plugin does not have a matching configuration file setup by
the user, as it will not use the example config file by default.

This patch makes the streaming plugin optional.

Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

janus-gateway: make recordplay plugin optional

Currently janus-gateway is built by default with the record and play plugin.
This causes a example config file to be placed on the target filing system
that the user may not need or want, creates a 68K .so
file on the target directory, and janus will also create a warning when ran
if the plugin does not have a matching configuration file setup by the user,
as it will not use the example config file by default.

This patch makes the record and play plugin a option.

Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

janus-gateway: make echo test plugin optional

Currently janus-gateway is built by default with the echo test plugin.
This causes a example config file to be placed on the target filing system
that the user may not need or want, creates a 36K .so
file on the target directory, and janus will also generate a warning when
ran if the plugin does not have a matching configuration file setup by
the user, as it will not use the example config file by default.

This patch makes the echo test plugin optional.

Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>