binutils-gdb.git
10 years agoMake functions static.
Yao Qi [Sun, 5 Jan 2014 11:36:03 +0000 (19:36 +0800)]
Make functions static.

gdb:

2014-01-07  Yao Qi  <yao@codesourcery.com>

* gnu-nat.c (make_inf) Update declaration.
(make_inf): Make it static.
(inf_set_traced): Likewise.
(inf_port_to_thread, inf_task_died_status): Likewise.

10 years agoRemove declaration of inf_tid_to_proc
Yao Qi [Sun, 5 Jan 2014 07:38:44 +0000 (15:38 +0800)]
Remove declaration of inf_tid_to_proc

inf_tid_to_proc is not defined at all.  This patch is to remove its
declaration.
gdb:

2014-01-07  Yao Qi  <yao@codesourcery.com>

* gnu-nat.c (inf_tid_to_proc): Remove declaration.

10 years agoFix no previous prototype for '_initialize_gnu_nat' [-Werror=missing-prototypes]
Yao Qi [Sun, 5 Jan 2014 07:05:44 +0000 (15:05 +0800)]
Fix no previous prototype for '_initialize_gnu_nat' [-Werror=missing-prototypes]

This patch fixes this error below by declaring _initialize_gnu_nat.

../../../git/gdb/gnu-nat.c:3447:1: error: no previous prototype for '_initialize_gnu_nat' [-Werror=missing-prototypes]

gdb:

2014-01-07  Yao Qi  <yao@codesourcery.com>

* gnu-nat.c (_initialize_gnu_nat): Declare.

10 years agoUse enum bfd_endian in gdbarch.sh
Yao Qi [Thu, 2 Jan 2014 03:02:56 +0000 (11:02 +0800)]
Use enum bfd_endian in gdbarch.sh

This patch changes the return type of gdbarch_byte_order and
gdbarch_byte_order_for_code, from 'int' to 'enum bfd_endian'.

gdb:

2014-01-07  Yao Qi  <yao@codesourcery.com>

* gdbarch.sh (byte_order, byte_order_for_code): Change type to
'enum bfd_endian'.
(struct gdbarch_info) <byte_order>: Change type to
'enum bfd_endian'.
<byte_order_for_code>: Likewise.
* gdbarch.c, gdbarch.h: Regenerated.

10 years agodaily update
Alan Modra [Mon, 6 Jan 2014 23:00:48 +0000 (09:30 +1030)]
daily update

10 years agofix JIT reader path creation
Tom Tromey [Mon, 6 Jan 2014 21:57:59 +0000 (14:57 -0700)]
fix JIT reader path creation

2014-01-06  Sasha Smundak  <asmundak@google.com>

* jit.c: (jit_reader_load_command): Fix JIT reader path creation.

10 years agoconvert CONST to const
Tom Tromey [Sun, 29 Dec 2013 09:39:28 +0000 (02:39 -0700)]
convert CONST to const

This removes the last uses of the obsolete CONST macro from the tree.
I'm checking this in.  Tested by rebuilding.

2014-01-06  Tom Tromey  <tromey@redhat.com>

* doublest.c (convert_doublest_to_floatformat): Use const, not
CONST.
* somread.c (som_symtab_read): Likewise.

10 years agolibiberty: fix --enable-install-libiberty flag [PR 56780]
Mike Frysinger [Mon, 6 Jan 2014 18:15:31 +0000 (18:15 +0000)]
libiberty: fix --enable-install-libiberty flag [PR 56780]

Commit 199570 fixed the --disable-install-libiberty behavior, but it also
added a bug where the enable path never works because the initial clear
of target_header_dir wasn't deleted.  So we end up initializing properly
at the top only to reset it at the end all the time.

git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@206367 138bc75d-0d04-0410-961f-82ee72b054a4

10 years agolibiberty: sync with gcc
Gary Benson [Mon, 6 Jan 2014 14:14:21 +0000 (14:14 +0000)]
libiberty: sync with gcc

libiberty/ 2014-01-06 Gary Benson <gbenson@redhat.com>

* cp-demangle.c (struct d_print_info): New fields
next_saved_scope, copy_templates, next_copy_template and
num_copy_templates.
(d_count_templates): New function.
(d_print_init): New parameter "dc".
Estimate numbers of templates and scopes required.
(d_print_free): Removed function.
(cplus_demangle_print_callback): Allocate stack for
templates and scopes.  Removed call to d_print_free.
(d_copy_templates): Removed function.
(d_save_scope): New function.
(d_get_saved_scope): Likewise.
(d_print_comp): Replace state saving/restoring code with
calls to d_save_scope and d_get_saved_scope.

git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@206362 138bc75d-0d04-0410-961f-82ee72b054a4

10 years agolibiberty: sync with gcc
Bill Maddox [Mon, 23 Dec 2013 17:49:47 +0000 (17:49 +0000)]
libiberty: sync with gcc

PR c++/41090
Add -fdeclone-ctor-dtor.
include/
* demangle.h (enum gnu_v3_ctor_kinds):
Added literal gnu_v3_unified_ctor.
(enum gnu_v3_ctor_kinds):
Added literal gnu_v3_unified_dtor.
libiberty/
* cp-demangle.c (cplus_demangle_fill_ctor,cplus_demangle_fill_dtor):
Handle unified ctor/dtor.
(d_ctor_dtor_name): Handle unified ctor/dtor.

git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@206182 138bc75d-0d04-0410-961f-82ee72b054a4

10 years agoFix a error of my previous commit.
Hui Zhu [Mon, 6 Jan 2014 16:28:55 +0000 (00:28 +0800)]
Fix a error of my previous commit.

10 years agoRemove gdb_bfd_stash_filename to fix crash with fix of binutils/11983
Hui Zhu [Mon, 6 Jan 2014 16:24:41 +0000 (00:24 +0800)]
Remove gdb_bfd_stash_filename to fix crash with fix of binutils/11983
https://sourceware.org/ml/gdb-patches/2014-01/msg00029.html
https://sourceware.org/ml/gdb-patches/2014-01/msg00053.html

2014-01-07  Hui Zhu  <hui@codesourcery.com>

* gdb_bfd.c (gdb_bfd_stash_filename): Removed.
(gdb_bfd_open): Removed gdb_bfd_stash_filename.
(gdb_bfd_fopen): Ditto.
(gdb_bfd_openr): Ditto.
(gdb_bfd_openw): Ditto.
(gdb_bfd_openr_iovec): Ditto.
(gdb_bfd_fdopenr): Ditto.
* gdb_bfd.h (gdb_bfd_stash_filename): Removed.
* solib-aix.c (solib_aix_bfd_open): Alloc object_bfd->filename
with xstrdup.
* solib-darwin.c (darwin_bfd_open): Alloc res->filename
with xstrdup.
* symfile-mem.c (symbol_file_add_from_memory): Removed
gdb_bfd_stash_filename.

10 years ago* nds32-asm.c (parse_operand): Fix out-of-range integer constant.
Maciej W. Rozycki [Mon, 6 Jan 2014 02:40:48 +0000 (10:40 +0800)]
* nds32-asm.c (parse_operand): Fix out-of-range integer constant.

10 years agodaily update
Alan Modra [Sun, 5 Jan 2014 23:00:37 +0000 (09:30 +1030)]
daily update

10 years agodaily update
Alan Modra [Sat, 4 Jan 2014 23:00:39 +0000 (09:30 +1030)]
daily update

10 years agodaily update
Alan Modra [Fri, 3 Jan 2014 23:00:51 +0000 (09:30 +1030)]
daily update

10 years ago* nat/linux-waitpid.c (linux_debug): Remove extraneous \n from output.
Doug Evans [Fri, 3 Jan 2014 22:34:45 +0000 (14:34 -0800)]
* nat/linux-waitpid.c (linux_debug): Remove extraneous \n from output.

10 years ago PR binutils/16199
Nick Clifton [Fri, 3 Jan 2014 14:16:17 +0000 (14:16 +0000)]
PR binutils/16199
* elf.c (vma_page_aligned_bias): Handle a maxpagesize value of
zero.

10 years agodaily update
Alan Modra [Thu, 2 Jan 2014 23:00:40 +0000 (09:30 +1030)]
daily update

10 years agoUpdate name in changelog entry.
Nick Clifton [Thu, 2 Jan 2014 14:55:02 +0000 (14:55 +0000)]
Update name in changelog entry.

10 years ago PR binutils/14289
Asmwarrior [Thu, 2 Jan 2014 14:30:18 +0000 (14:30 +0000)]
PR binutils/14289
* pef.c (bfd_pef_xlib_read_header): Increase buffer size to 80.

10 years ago PR binutils/11983
Nick Clifton [Thu, 2 Jan 2014 12:14:37 +0000 (12:14 +0000)]
PR binutils/11983
* archive.c (_bfd_get_elt_at_filepos): Store a copy of the
filename in the bfd's filename field.
* elfcode.h (bfd_from_remote_memory): Likewise.
* ieee.c (ieee_object_p): Likewise.
* mach-o.c (bfd_mach_o_fat_member_init): Likewise.
* oasys.c (oasys_openr_next_archived_file): Likewise.
* vms-lib.c (_bfd_vms_lib_get_module): Likewise.
* opncls.c (bfd_fopen): Likewise.
(bfd_openstreamr): Likewise.
(bfd_openr_iovec): Likewise.
(bfd_openw): Likewise.
(bfd_create): Likewise.
(_bfd_delete_bfd): Free filename.

10 years agodaily update
Alan Modra [Wed, 1 Jan 2014 23:00:37 +0000 (09:30 +1030)]
daily update

10 years agoAdd gdb/ChangeLog entry for previous change.
Joel Brobecker [Wed, 1 Jan 2014 03:57:03 +0000 (07:57 +0400)]
Add gdb/ChangeLog entry for previous change.

I forgot to add that entry when I checked in the "copyright year range"
update for GDB files.

10 years agoUpdate Copyright year range in all files maintained by GDB.
Joel Brobecker [Wed, 1 Jan 2014 03:54:24 +0000 (07:54 +0400)]
Update Copyright year range in all files maintained by GDB.

10 years agoUpdate copyright year in gdb/gdbserver/gdbreplay version output.
Joel Brobecker [Wed, 1 Jan 2014 03:39:44 +0000 (07:39 +0400)]
Update copyright year in gdb/gdbserver/gdbreplay version output.

gdb/ChangeLog:

        * top.c (print_gdb_version): Set copyright year to 2014.

gdb/gdbserver/ChangeLog:

        * gdbserver.c (gdbserver_version): Set copyright year to 2014.
        * gdbreplay.c (gdbreplay_version): Likewise.

10 years agoAdd gdb/ChangeLog-2013 entry in fnchange.lst.
Joel Brobecker [Wed, 1 Jan 2014 03:34:22 +0000 (07:34 +0400)]
Add gdb/ChangeLog-2013 entry in fnchange.lst.

10 years agoNew Year - GDB ChangeLog rotation.
Joel Brobecker [Wed, 1 Jan 2014 03:31:51 +0000 (07:31 +0400)]
New Year - GDB ChangeLog rotation.

10 years agodaily update
Alan Modra [Tue, 31 Dec 2013 23:00:40 +0000 (09:30 +1030)]
daily update

10 years ago * objcopy.c (dump_sections): New list.
Nick Clifton [Tue, 31 Dec 2013 09:52:24 +0000 (09:52 +0000)]
* objcopy.c (dump_sections): New list.
(command_line_switch): Add OPTION_DUMP_SECTION.
(copy_options): Add dump-section.
(copy_usage): Document new option.
(copy_object): Dump requested sections.
(copy_main): Handle --dump-section.
* doc/binutils.texi: Document --dump-section option.
* NEWS: Mention new feature.

10 years agodaily update
Alan Modra [Mon, 30 Dec 2013 23:00:37 +0000 (09:30 +1030)]
daily update

10 years ago * peXXigen.c (rsrc_process_section): Use ptrdiff_t as the type for
Ilya Tocar [Mon, 30 Dec 2013 15:28:41 +0000 (15:28 +0000)]
* peXXigen.c (rsrc_process_section): Use ptrdiff_t as the type for
pointer arithmetic.

10 years agoClarify documentation of the gdb.Field.bitpos attribute
Joel Brobecker [Sat, 28 Dec 2013 03:24:36 +0000 (07:24 +0400)]
Clarify documentation of the gdb.Field.bitpos attribute

gdb/doc/ChangeLog:

        * gdb.texinfo (Types In Python): Clarify the documentation
        of attribute gdb.Field.bitpos.

10 years agoAdd comment describing arm_stap_is_single_operand
Sergio Durigan Junior [Sun, 29 Dec 2013 20:55:11 +0000 (18:55 -0200)]
Add comment describing arm_stap_is_single_operand

2013-12-29  Sergio Durigan Junior  <sergiodj@redhat.com>

* arm-linux-tdep.c (arm_stap_is_single_operand): Add comment
describing function.

10 years agodaily update
Alan Modra [Sat, 28 Dec 2013 23:00:39 +0000 (09:30 +1030)]
daily update

10 years agoExtend handling of immediates on ARM's SystemTap SDT probe support
Sergio Durigan Junior [Sat, 28 Dec 2013 21:20:58 +0000 (19:20 -0200)]
Extend handling of immediates on ARM's SystemTap SDT probe support

Continuing my series of fixes on the SystemTap SDT support for the
ARM/AArch64 architectures, this patch now extends how ARM's SDT specific
parser handles literal numbers (immediates).

Currently, it only accepts "#" as the prefix.  However, according to
"info '(as) ARM-Chars'", expressions can also have "$" and nothing as a
prefix.  This patch extends the parser to accept those options.

2013-12-28  Sergio Durigan Junior  <sergiodj@redhat.com>

* arm-linux-tdep.c (arm_stap_is_single_operand): Accept "$" as a
literal prefix.  Also accept no prefix at all.
(arm_stap_parse_special_token): Likewise.
(arm_linux_init_abi): Likewise.

10 years agoImplement SystemTap SDT probe support for AArch64
Sergio Durigan Junior [Sat, 28 Dec 2013 16:14:11 +0000 (14:14 -0200)]
Implement SystemTap SDT probe support for AArch64

This commit implements the needed bits for SystemTap SDT probe support
on AArch64 architectures.

First, I started by looking at AArch64 assembly specification and
filling the necessary options on gdbarch's stap machinery in order to
make the generic asm parser (implemented in stap-probe.c) recognize
AArch64's asm.

After my last patch for the SystemTap SDT API, which extends it in order
to accept multiple prefixes and suffixes, this patch became simpler.  I
also followed Marcus suggestion and did not shared code between 32- and
64-bit ARM.

Tom asked me in a previous message how I did my tests.  I believe I
replied that, but just in case: I ran the tests on
gdb.base/stap-probe.exp by hand.  I also managed to run the tests on
real hardware, and they pass without regressions.

2013-12-28  Sergio Durigan Junior  <sergiodj@redhat.com>

PR tdep/15653
* NEWS: Mention SystemTap SDT probe support for AArch64 GNU/Linux.
* aarch64-linux-tdep.c: Include necessary headers for parsing of
SystemTap SDT probes.
(aarch64_stap_is_single_operand): New function.
(aarch64_stap_parse_special_token): Likewise.
(aarch64_linux_init_abi): Declare SystemTap SDT probe argument
prefixes and suffixes.  Initialize gdbarch with them.

10 years ago Adjust MMIX gas tests for recent bfd/elf.c change.
Hans-Peter Nilsson [Sat, 28 Dec 2013 15:57:24 +0000 (16:57 +0100)]
Adjust MMIX gas tests for recent bfd/elf.c change.
* gas/mmix/bspec-1.d: Adjust for SHF_INFO_LINK now set on RELA
sections.
* gas/mmix/bspec-2.d: Ditto.

10 years agoFix gdb.Field attributes documentation for enum types.
Joel Brobecker [Mon, 23 Dec 2013 07:15:42 +0000 (11:15 +0400)]
Fix gdb.Field attributes documentation for enum types.

The following patch ...

    | commit 14e75d8ea4fe9ed4dbf292ae4a9745e33e2ff353
    | Date:   Wed Apr 18 06:46:47 2012 +0000
    |
    |     gdb/
    |         PR symtab/7259:
    | [...]

... discussed under ...

    [PATCH] Allow 64-bit enum values
    http://www.sourceware.org/ml/gdb-patches/2012-03/msg00772.html

... introduced a change in the gdb.Fields API without documenting it:

    | I took a separate approach from the one I took in:
    |
    | http://sourceware.org/ml/gdb-patches/2012-02/msg00403.html
    |
    | and removed the overloaded meaning of the bitpos location variable to
    | fix PR symtab/7259. In the following patch, I introduce a separate
    | field_location union member 'enumval' which can accept LONGEST and
    | hence expand enum values to 64-bit signed values. With this change,
    | bitpos now only is used for (non-negative) offsets into structures,
    | since the other overload of bitpos (range bounds) were already
    | separated into struct range_bound.

This patch updates the documentation to reflect that change.

gdb/doc/ChangeLog:

        * gdb.texinfo (Types In Python): Fix the documentation of
        attribute "bitpos" in class gdb.Field for enum types.  Add
        documentation for attribute "enumval" in that same class.

10 years agoTurn -list-feature @table into @ftable.
Joel Brobecker [Mon, 23 Dec 2013 01:33:59 +0000 (05:33 +0400)]
Turn -list-feature @table into @ftable.

This is to make it easier to discover the various options displayed
by the -list-features command.

gdb/doc/ChangeLog:

        * gdb.texinfo (GDB/MI Support Commands): Change @table into
        @ftable.

10 years agodaily update
Alan Modra [Fri, 27 Dec 2013 23:00:46 +0000 (09:30 +1030)]
daily update

10 years agodaily update
Alan Modra [Thu, 26 Dec 2013 23:00:38 +0000 (09:30 +1030)]
daily update

10 years agodaily update
Alan Modra [Wed, 25 Dec 2013 23:00:38 +0000 (09:30 +1030)]
daily update

10 years agodaily update
Alan Modra [Tue, 24 Dec 2013 23:00:38 +0000 (09:30 +1030)]
daily update

10 years agoReorganize extension language auto-loading docs.
Doug Evans [Tue, 24 Dec 2013 05:01:17 +0000 (21:01 -0800)]
Reorganize extension language auto-loading docs.

* gdb.texinfo (Auto-loading): Move menu up.  Move discussion of
auto-loaded objfile scripts and .debug_gdb_scripts section to their
corresponding section in Extending GDB.
(Extending GDB): Move menu up.  New menu item "Auto-loading
extensions".
(Sequences): New menu item "Auto-loading sequences".
(Auto-loading sequences): New node.
(Python): Rename section from Scripting GDB to Extending GDB.
(Python Auto-loading): Update xref, refer to "Auto-loading extensions".
Move docs on ways to auto-load extensions to ...
(Auto-loading extensions): ... here.  New node.

10 years ago2013-12-17 Sterling Augustine <saugustine@google.com>
Sterling Augustine [Tue, 17 Dec 2013 21:43:34 +0000 (13:43 -0800)]
2013-12-17  Sterling Augustine  <saugustine@google.com>

* linespec.c (add_sal_to_sals): Use "<unknown>" when a symbol
isn't found.

10 years agodaily update
Alan Modra [Mon, 23 Dec 2013 23:00:59 +0000 (09:30 +1030)]
daily update

10 years agoSome cleanups on stap-probe.c
Sergio Durigan Junior [Mon, 23 Dec 2013 22:48:08 +0000 (20:48 -0200)]
Some cleanups on stap-probe.c

This patch does some basic cleanups on the SystemTap SDT probes API.  It
removes spurious newlines, brackets, reindents some code, and do
explicit checks for NULL, NUL, and 0 where applicable.

2013-12-23  Sergio Durigan JUnior  <sergiodj@redhat.com>

* stap-probe.c (struct stap_probe) <args_parsed>: Add comment.
(stap_is_generic_prefix): Delete extra brackets.  Reindent.
(stap_parse_register_operand): Remove spurious newlines.  Simplify
code to parse special token.
(stap_parse_argument_conditionally): Add gdb_assert.
(stap_parse_argument_1): Likewise.  Explicitly check for NULL and
NUL.
(stap_parse_probe_arguments): Likewise.
(handle_stap_probe): Likewise.  Reindent code.
(get_stap_base_address): Explicitly check for NULL.
(stap_get_probes): Likewise.  Reindent code.
(stap_relocate): Explicitly check for 0.
(stap_gen_info_probes_table_values): Likewise.

10 years agoMove GDB/MI commands related to support-query to their own @node.
Joel Brobecker [Fri, 13 Dec 2013 06:01:33 +0000 (07:01 +0100)]
Move GDB/MI commands related to support-query to their own @node.

A number of commands provide the capability to query the debugger
about support for various features, and one of them in particular
(-list-features), is expected to grow as new features get added.
-list-target-features should also grow a bit over time, but probably
slower.

These commands deserve their own section and @node.

gdb/doc/ChangeLog:

        * gdb.texinfo (GDB/MI): Add "GDB/MI Support Commands" entry
        in menu.
        (GDB/MI Variable Objects): Adjust reference to "-list-features"
        command, now in a new node.
        (GDB/MI Support Commands): New node, with its contents being
        extracted from the "GDB/MI Miscellaneous Commands" node.
        A small paragraph introducing the section is also added at
        the start.
        (GDB/MI Miscellaneous Commands): Delete the description of the
        -info-gdb-mi-command, -list-features and -list-target-features
        commands, now hosted in the "GDB/MI Support Commands" node.

10 years agodaily update
Alan Modra [Sun, 22 Dec 2013 23:00:47 +0000 (09:30 +1030)]
daily update

10 years agodaily update
Alan Modra [Sat, 21 Dec 2013 23:00:44 +0000 (09:30 +1030)]
daily update

10 years agodaily update
Alan Modra [Fri, 20 Dec 2013 23:01:03 +0000 (09:31 +1030)]
daily update

10 years agoDefine IREL_IN_PLT for elf_k1om.sh and elf_l1om.sh
H.J. Lu [Fri, 20 Dec 2013 16:27:02 +0000 (08:27 -0800)]
Define IREL_IN_PLT for elf_k1om.sh and elf_l1om.sh

* emulparams/elf_k1om.sh (IREL_IN_PLT): Define.
* emulparams/elf_l1om.sh (IREL_IN_PLT): Likewise.

10 years agoCovert leading spaces to tab
H.J. Lu [Fri, 20 Dec 2013 16:25:24 +0000 (08:25 -0800)]
Covert leading spaces to tab

10 years ago PR binutils/16218
Nick Clifton [Fri, 20 Dec 2013 13:52:23 +0000 (13:52 +0000)]
PR binutils/16218
* dwarf.c (read_and_display_attr_value): Only print a tab
character if it preceeds further text.

* binutils-all/dw2-1.W: Update expected objdump output.
* binutils-all/i386/compressed-1a.d: Likewise.
* binutils-all/objdump.W: Likewise.
* binutils-all/x86-64/compressed-1a.d: Likewise.

* gas/elf/dwarf2-1.d: Update expected objdump output.
* gas/elf/dwarf2-2.d: Likewise.
* gas/i386/dw2-compress-1.d: Likewise.

10 years agoDon't segv on cie.initial_instructions[] overflow.
Alan Modra [Fri, 20 Dec 2013 13:27:52 +0000 (23:57 +1030)]
Don't segv on cie.initial_instructions[] overflow.

Don't attempt to merge CIEs with a larger number of insns than will
fit in the buffer.

* elf-eh-frame.c (cie_eq): Return false when initial_insn_length
is too large.
(cie_compute_hash): Don't exceed bounds of initial_instructions.
(_bfd_elf_parse_eh_frame): Always set initial_insn_length, and
save as much of insns to initial_instructions[] as will fit.

10 years ago2013-12-20 Chung-Lin Tang <cltang@codesourcery.com>
Chung-Lin Tang [Fri, 20 Dec 2013 12:53:53 +0000 (20:53 +0800)]
2013-12-20  Chung-Lin Tang  <cltang@codesourcery.com>

* nios2-linux-tdep.c (nios2_linux_sigreturn_init): Remove.
(nios2_linux_sigreturn_tramp_frame): Remove.
(nios2_linux_rt_sigreturn_tramp_frame): Update rt_sigreturn syscall
number.
(nios2_linux_syscall_next_pc): Likewise. Remove sigreturn case.
(nios2_linux_init_abi): Remove registration of
nios2_linux_sigreturn_tramp_frame.

10 years agoRemove duplicated entry for .pad in c-arm.texi
Tristan Gingold [Fri, 20 Dec 2013 11:38:14 +0000 (12:38 +0100)]
Remove duplicated entry for .pad in c-arm.texi

* doc/c-arm.texi (ARM Directives): Remove duplicate .pad entry.

10 years ago * stringpool.cc (Stringpool_template::reserve): Add
Ian Lance Taylor [Fri, 20 Dec 2013 05:54:43 +0000 (21:54 -0800)]
* stringpool.cc (Stringpool_template::reserve): Add
HAVE_UNORDERED_MAP case.
* stringpool.cc (Stringpool_template::print_stats): Likewise.

10 years agodaily update
Alan Modra [Thu, 19 Dec 2013 23:00:40 +0000 (09:30 +1030)]
daily update

10 years agoMask out PREFIX_ADDR when adding prefix to opcode
H.J. Lu [Thu, 19 Dec 2013 22:28:18 +0000 (14:28 -0800)]
Mask out PREFIX_ADDR when adding prefix to opcode

PREFIX_ADDR isn't a prefix to opcode.  This patch masks out PREFIX_ADDR
when adding prefix to opcode.

PR gdb/16305
* i386-tdep.c (i386_process_record): Mask out PREFIX_ADDR when
adding prefix to opcode.

10 years agoProperly decode MODRM byte for 64-bit
H.J. Lu [Thu, 19 Dec 2013 22:24:34 +0000 (14:24 -0800)]
Properly decode MODRM byte for 64-bit

64-bit mode doesn't use 16-bit address.  We should always check SIB byte
for address in 64-bit mode.

PR gdb/16304
* i386-tdep.c (i386_record_lea_modrm_addr): Don't use 16-bit
address in 64-bit mode.

10 years agoZero-extend address from 32-bit to 64-bit for ADDR32 prefix
H.J. Lu [Thu, 19 Dec 2013 22:22:30 +0000 (14:22 -0800)]
Zero-extend address from 32-bit to 64-bit for ADDR32 prefix

When there is ADDR32 prefix in 64-bit mode, we should zero-extend
address from 32-bit to 64-bit.

PR gdb/16304
* i386-tdep.c (i386_record_lea_modrm_addr): Zero-extend 32-bit
address to 64-bit in 64-bit mode.

10 years agoAdd amd64_x32_linux_record_tdep and amd64_x32_sys
H.J. Lu [Thu, 19 Dec 2013 22:17:48 +0000 (14:17 -0800)]
Add amd64_x32_linux_record_tdep and amd64_x32_sys

X32 Linux system calls are diffferent from amd64 Linux system calls in
system call numbers as well as parameter types/values.  This patch adds
amd64_x32_linux_record_tdep and amd64_x32_syscall for x32.

PR gdb/16304
* amd64-linux-tdep.c (amd64_canonicalize_syscall): Handle x32
system calls.
(amd64_x32_linux_record_tdep): New.
(amd64_linux_syscall_record_common): New function.
(amd64_linux_syscall_record): Call
amd64_linux_syscall_record_common with amd64_linux_record_tdep.
(amd64_x32_linux_syscall_record): Call
amd64_linux_syscall_record_common with
amd64_x32_linux_record_tdep.
(amd64_linux_init_abi_common): Move amd64_linux_record_tdep
initialization and tdep->i386_syscall_record setup to ...
(amd64_linux_init_abi): Here.
(amd64_x32_linux_init_abi): Initialize
amd64_x32_linux_record_tdep.  Set tdep->i386_syscall_record to
amd64_x32_linux_syscall_record.
* amd64-linux-tdep.h (amd64_x32_syscall): New enum.

10 years agoExtend SystemTap SDT probe argument parser
Sergio Durigan Junior [Thu, 19 Dec 2013 20:53:40 +0000 (18:53 -0200)]
Extend SystemTap SDT probe argument parser

This patch extends the current generic parser for SystemTap SDT probe
arguments.  It can be almost considered a cleanup, but the main point of
it is actually to allow the generic parser to accept multiple prefixes
and suffixes for the its operands (i.e., integers, register names, and
register indirection).

I have chosen to implement this as a list of const strings, and declare
this list as "static" inside each target's method used to initialize
gdbarch.

This patch is actually a preparation for an upcoming patch for ARM,
which implements the support for multiple integer prefixes (as defined
by ARM's asm spec).  And AArch64 will also need this, for the same
reason.

This patch was regtested on all architectures that it touches (i.e.,
i386, x86_64, ARM, PPC/PPC64, s390x and IA-64).  No regressions were found.

2013-12-19  Sergio Durigan Junior  <sergiodj@redhat.com>

* amd64-tdep.c (amd64_init_abi): Declare SystemTap SDT probe
argument prefixes and suffixes.  Initialize gdbarch with them.
* arm-linux-tdep.c (arm_linux_init_abi): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.
* gdbarch.sh (stap_integer_prefix, stap_integer_suffix)
(stap_register_prefix, stap_register_suffix)
(stap_register_indirection_prefix)
(stap_register_indirection_suffix): Declare as "const char *const
*" instead of "const char *".  Adjust printing function.  Rename
all of the variables to the plural.
(pstring_list): New function.
* i386-tdep.c (i386_elf_init_abi): Declare SystemTap SDT probe
argument prefixes and suffixes.  Initialize gdbarch with them.
* ia64-linux-tdep.c (ia64_linux_init_abi): Likewise.
* ppc-linux-tdep.c (ppc_linux_init_abi): Likewise.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* stap-probe.c (stap_is_generic_prefix): New function.
(stap_is_register_prefix): Likewise.
(stap_is_register_indirection_prefix): Likewise.
(stap_is_integer_prefix): Likewise.
(stap_generic_check_suffix): Likewise.
(stap_check_integer_suffix): Likewise.
(stap_check_register_suffix): Likewise.
(stap_check_register_indirection_suffix): Likewise.
(stap_parse_register_operand): Remove unecessary declarations for
variables holding prefix and suffix information.  Use the new
functions listed above for checking for prefixes and suffixes.
(stap_parse_single_operand): Likewise.

10 years agoSet SHF_INFO_LINK bit for SHT_REL/SHT_RELA sections
H.J. Lu [Thu, 19 Dec 2013 19:34:47 +0000 (11:34 -0800)]
Set SHF_INFO_LINK bit for SHT_REL/SHT_RELA sections

It is a good pratice to set the SHF_INFO_LINK bit when the sh_info field
represents a section header index.

bfd/

PR binutils/16317
* elf.c (assign_section_numbers): Set the SHF_INFO_LINK bit for
SHT_REL/SHT_RELA sections when setting the sh_info field.

binutils/testsuite/

PR binutils/16317
* binutils-all/readelf.s: Updated.
* binutils-all/readelf.s-64: Likewise.

ld/testsuite/

PR binutils/16317
* ld-elf/linkinfo1.s: New file.
* ld-elf/linkinfo1a.d: Likewise.
* ld-elf/linkinfo1b.d: Likewise.

10 years agoDon't run x86-64-disassem for mingw targets
H.J. Lu [Thu, 19 Dec 2013 19:25:46 +0000 (11:25 -0800)]
Don't run x86-64-disassem for mingw targets

mingw targets pad text sections which won't work with x86-64-disassem.

* gas/i386/i386.exp: Don't run x86-64-disassem for mingw targets.

10 years agoFix PR breakpoints/16297: catch syscall with syscall 0
Gabriel Krisman Bertazi [Thu, 19 Dec 2013 19:01:49 +0000 (17:01 -0200)]
Fix PR breakpoints/16297: catch syscall with syscall 0

Code rationale
==============
by: Gabriel Krisman Bertazi

This is a fix for bug 16297. The problem occurs when the user attempts
to catch any syscall 0 (such as syscall read on Linux/x86_64). GDB was
not able to catch the syscall and was missing the breakpoint.

Now, breakpoint_hit_catch_syscall returns immediately when it finds the
correct syscall number, avoiding a following check for the end of the
search vector, that returns a no hit if the syscall number was zero.

Testcase rationale
==================
by: Sergio Durigan Junior

This testcase is a little difficult to write.  By doing a quick
inspection at the Linux source, one can see that, in many targets, the
syscall number 0 is restart_syscall, which is forbidden to be called
from userspace.  Therefore, on many targets, there's just no way to test
this safely.

My decision was to take the simpler route and just adds the "read"
syscall on the default test.  Its number on x86_64 is zero, which is
"good enough" since many people here do their tests on x86_64 anyway and
it is a popular architecture.

However, there was another little gotcha.  When using "read" passing 0
as the third parameter (i.e., asking it to read 0 bytes), current libc
implementations could choose not to effectively call the syscall.
Therefore, the best solution was to create a temporary pipe, write 1
byte into it, and then read this byte from it.

gdb/ChangeLog
2013-12-19  Gabriel Krisman Bertazi  <gabriel@krisman.be>

PR breakpoints/16297
* breakpoint.c (breakpoint_hit_catch_syscall): Return immediately
when expected syscall is hit.

gdb/testsuite/ChangeLog
2013-12-19  Sergio Durigan Junior  <sergiodj@redhat.com>

PR breakpoints/16297
* gdb.base/catch-syscall.c (read_syscall, pipe_syscall)
(write_syscall): New variables.
(main): Create a pipe, write 1 byte in it, and read 1 byte from
it.
* gdb.base/catch-syscall.exp (all_syscalls): Include "pipe,
"write" and "read" syscalls.
(fill_all_syscalls_numbers): Improve the way to obtain syscalls
numbers.

10 years ago * Fix indentation issue and reorganize last commit entry
Pierre Muller [Thu, 19 Dec 2013 13:00:11 +0000 (14:00 +0100)]
  * Fix indentation issue and reorganize last commit entry
  so that it is shorter than 80.
  peXXigen.c (rsrc_cmp): Fix unused variable warning.

10 years agodon't allocate serial_ops
Tom Tromey [Fri, 6 Dec 2013 18:34:49 +0000 (11:34 -0700)]
don't allocate serial_ops

Now that struct serial_ops is const everywhere, we can easily turn the
instances into globals.  This patch implements this idea.

On the one hand I think this is nicer since it makes a bit more data
readonly and slightly reduces allocations.  On the other hand it
reduces readability somewhat.

If the readability is a concern to anyone I was thinking I could write
a macro that conditionally uses GCC's designated initializer
extension.

Tested by rebuilding on x86-64 Fedora 18, both natively and using the
mingw cross tools.

2013-12-19  Tom Tromey  <tromey@redhat.com>

* ser-unix.c (hardwire_ops): New global.
(_initialize_ser_hardwire): Use it.
* ser-tcp.c (tcp_ops): New global.
(_initialize_ser_tcp): Use it.
* ser-pipe.c (pipe_ops): New global.
(_initialize_ser_pipe): Use it.
* ser-mingw.c (hardwire_ops, tty_ops, pipe_ops, tcp_ops): New
globals.
(_initialize_ser_windows): Use them.

10 years agomake serial_ops const
Tom Tromey [Fri, 6 Dec 2013 17:58:50 +0000 (10:58 -0700)]
make serial_ops const

I noticed that the serial_ops vtable is not const, but really it ought
to be.

This patch constifies it, removing the only mutable field in the
process.

Tested by rebuilding on x86-64 Fedora 18, both natively and using the
mingw cross tools.

2013-12-19  Tom Tromey  <tromey@redhat.com>

* serial.c (serial_ops_p): New typedef.
(serial_ops_list): Now a VEC.
(serial_interface_lookup): Return const.  Use VEC_iterate.
(serial_add_interface): Make parameter const.
(serial_open): Update.
(serial_fdopen_ops): Make 'ops' const.
(serial_pipe): Update.
* ser-tcp.c (_initialize_ser_tcp): Update.
* ser-pipe.c (_initialize_ser_pipe): Update.
* ser-unix.c (_initialize_ser_hardwire): Update.
* ser-mingw.c (_initialize_ser_windows): Update.
* ser-go32.c (dos_ops): Now const.  Update.
* serial.h (struct serial) <ops>: Now const.
(struct serial_ops) <next>: Remove.
(serial_add_interface): Make parameter const.

10 years agoremove remnants of old Mach-O workaround
Tom Tromey [Mon, 9 Dec 2013 22:01:31 +0000 (15:01 -0700)]
remove remnants of old Mach-O workaround

I happened to run readelf on an ELF file created by Guile.  readelf
complained about invalid values for DW_FORM_strp.  At first I assumed
this was just a Guile bug, but eu-readelf did the right thing, so I
looked a bit deeper.

I came across some old Mach-O code to bias some offsets by section
addresses.  Guile, unlike many ELF writers, sets the address for the
various DWARF-related sections, causing this unusual code to be run.

This code came from an old commit:

    2005-09-30  H.J. Lu  <hongjiu.lu@intel.com>

    * dwarf.c (fetch_indirect_string): Adjust for section address.
    (process_debug_info): Likewise.
    (display_debug_loc): Likewise.
    (display_debug_ranges): Likewise.

    * objdump.c (mach_o_dwarf_sections): New.
    (generic_dwarf_sections): Likewise.
    (check_mach_o_dwarf): Likewise.
    (dump_dwarf): Call check_mach_o_dwarf.

However it was partially reverted here:

    https://sourceware.org/ml/binutils/2008-11/msg00134.html

This patch just completes the reversion.

Built and regtested on x86-64 Fedora 18.  I also ran the resulting
readelf against the Guile-created object with success.

I have no way of testing this on Mach-O, so your feedback is
solicited.

2013-12-19  Tom Tromey  <tromey@redhat.com>

* dwarf.c (fetch_indirect_string): Don't bias by section address.
(fetch_indexed_string): Likewise.
(process_debug_info): Likewise.
(display_debug_loc): Likewise.
(display_debug_ranges): Likewise.

10 years ago * peXXigen.c (u16_mbtouc): Avoid unused function warning by excluding if
Pierre Muller [Thu, 19 Dec 2013 12:37:30 +0000 (12:37 +0000)]
*  peXXigen.c (u16_mbtouc): Avoid unused function warning by excluding if
__CYGWIN__ or __MINGW32__ macro is defined.
(rsrc_cmp): Fix Windows host version and version without wchar header.
[__CYGWIN__, __MINGW32__]: Introduce rsrccmp macro.
Fix coding standard issues.

10 years agofortran: enable ptype/whatis for modules.
Keven Boell [Fri, 15 Nov 2013 10:32:01 +0000 (11:32 +0100)]
fortran: enable ptype/whatis for modules.

Added new domain MODULE_DOMAIN for fortran modules to avoid
issues with sharing namespaces (e.g. when a variable currently
in scope has the same name as a module).

(gdb) ptype modname
old> No symbol "modname" in current context.
new> type = module modname

This fixes PR 15209 and also addresses the issue
with sharing namespaces:
https://sourceware.org/ml/gdb-patches/2013-02/msg00643.html

2013-11-19  Keven Boell  <keven.boell@intel.com>
            Sanimir Agovic  <sanimir.agovic@intel.com>

* cp-namespace.c (cp_lookup_nested_symbol): Enable
nested lookups for fortran modules.
* dwarf2read.c (read_module): Add fortran module to
the symbol table.
(add_partial_symbol, add_partial_module): Add fortran
module to the partial symbol table.
(new_symbol_full): Create full symbol for fortran module.
* f-exp.y (yylex): Add new module domain to be parsed.
* symtab.h: New domain for fortran modules.

testsuite/

* gdb.fortran/module.exp: Completion matches fortran module
names as well. ptype/whatis on modules return a proper type.
Add new check for having the correct scope.

10 years agofortran: enable ptype/whatis for user defined types.
Keven Boell [Fri, 25 Oct 2013 11:10:57 +0000 (12:10 +0100)]
fortran: enable ptype/whatis for user defined types.

(gdb) ptype type
old> No symbol "type" in current context.
new> type = Type type
     integer(kind=4) :: t_i
     End Type type

2013-11-19  Sanimir Agovic  <sanimir.agovic@intel.com>
            Keven Boell  <keven.boell@intel.com>

* f-exp.y (yylex): Add domain array to enable lookup
in multiple domains. Loop over lookup domains and try
to find requested symbol. Add STRUCT_DOMAIN to lookup
domains to be able to query for user defined types.

testsuite/
* gdb.fortran/type.f90: New file.
* gdb.fortran/whatis_type.f90: New file.

10 years agoSet proper OS ABI magic for ELF/m68k
Andreas Schwab [Wed, 11 Dec 2013 15:47:43 +0000 (16:47 +0100)]
Set proper OS ABI magic for ELF/m68k

* elf32-m68k.c (elf_m68k_add_symbol_hook): New function.
(elf_backend_add_symbol_hook): Define.

10 years agoAdd configure checks for <unordered_set> and <unordered_map>.
Cary Coutant [Wed, 18 Dec 2013 23:53:05 +0000 (15:53 -0800)]
Add configure checks for <unordered_set> and <unordered_map>.

gold/
* configure.ac: Check for <unordered_set> and <unordered_map>.
* config.in: Regenerate.
* configure: Regenerate.
* system.h: Use <unordered_set> and <unordered_map> if available.

10 years agodaily update
Alan Modra [Wed, 18 Dec 2013 23:00:57 +0000 (09:30 +1030)]
daily update

10 years agoImprove and fix catch-syscall.exp
Sergio Durigan Junior [Wed, 18 Dec 2013 22:19:01 +0000 (20:19 -0200)]
Improve and fix catch-syscall.exp

While fixing another bug, I found that the current
gdb.base/catch-syscall.exp is kind of messy, could use some
improvements, and is not correctly testing some things.

I've made the following patch to address all the issues I found.  On the
organization side, it does a cleanup and removes unecessary imports of
gdb_prompt, uses prepare_for_testing and clean_restart where needed, and
fixes some comments.  The testcase was also not correctly testing
catching syscalls using only numbers, or catching many syscalls at
once.  I fixed that.

The patch also uses a new method for obtaining the syscalls numbers: it
relies on the C source file to get them, via <sys/syscall.h> and SYS_*
macros.  This makes the .exp file simpler because there is no need to
include target conditionals there.

I tested this on x86_64 Fedora 18.

gdb/testsuite/ChangeLog:
2013-12-18  Sergio Durigan Junior  <sergiodj@redhat.com>

* gdb.base/catch-syscall.c: Include <sys/syscall.h>.
(close_syscall, chroot_syscall, exit_group_syscall): New
variables.
* gdb.base/catch-syscall.exp: Replace gdb_compile by
prepare_for_testing.  Call fill_all_syscalls_numbers before
starting.  Replace gdb_exit, gdb_start, gdb_reinitialize_dir and
gdb_load by clean_restart.
(check_info_bp_any_syscall, check_info_bp_specific_syscall)
(check_info_bp_many_syscalls): Remove global gdb_prompt.
(check_call_to_syscall): Likewise.  Add global decimal.  Improve
testing regex.
(check_return_from_syscall): Likewise.
(check_continue, insert_catch_syscall_with_arg): Remove global
gdb_prompt.
(insert_catch_syscall_with_many_args): Likewise.  Add global
decimal.  Fix $filter_str.  Improve testing regex.
(check_for_program_end): Remove global gdb_prompt.
(test_catch_syscall_without_args): Likewise.  Add global decimal.
Improve testing regex.
(test_catch_syscall_with_args, test_catch_syscall_with_many_args)
(test_catch_syscall_with_wrong_args)
(test_catch_syscall_restarting_inferior)
(test_catch_syscall_fail_nodatadir): Remove global gdb_prompt.
(do_syscall_tests): Likewise.  Remove global srcdir.
(test_catch_syscall_without_args_noxml): Remove global gdb_prompt.
Add global last_syscall_number.  Test for the exact syscall number
to be caught.
(test_catch_syscall_with_args_noxml): Remove global gdb_prompt.
Add global all_syscalls_numbers.  Test each syscall number to be
caught, instead of only testing "close".
(test_catch_syscall_with_wrong_args_noxml): Remove global gdb_prompt.
(do_syscall_tests_without_xml): Likewise.  Remove global srcdir.
Remove stale comment.
(fill_all_syscalls_numbers): Add global last_syscall_number.  Fill
the correct syscall numbers using information from the inferior.

10 years agogas/
Yufeng Zhang [Wed, 18 Dec 2013 19:15:57 +0000 (19:15 +0000)]
gas/

* config/tc-aarch64.c (md_assemble): Defer the feature checking until
do_encode () succeeds.

gas/testsuite/

* gas/aarch64/rm-simd-ext.d: New file.
* gas/aarch64/rm-simd-ext.l: Likewise.
* gas/aarch64/rm-simd-ext.s: Likewise.

10 years agogdb/
Yufeng Zhang [Wed, 18 Dec 2013 16:47:33 +0000 (16:47 +0000)]
gdb/

* aarch64-linux-nat.c (aarch64_linux_set_debug_regs): Set
iov.iov_len with the real length in use.

gdb/gdbserver/

* linux-aarch64-low.c (aarch64_linux_set_debug_regs): Set
iov.iov_len with the real length in use.

10 years agold/testsuite
Yufeng Zhang [Wed, 18 Dec 2013 15:16:41 +0000 (15:16 +0000)]
ld/testsuite

2013-12-18  Vidya Praveen  <vidyapraveen@arm.com>

* lib/ld-lib.exp (check_lto_available): Support cflags, ldflags and
test by compiling for an executable rather than shared library.

10 years ago * config/tc-rx.c (rx_include): Rename 'eof' to 'last_char' in
Nick Clifton [Wed, 18 Dec 2013 11:51:25 +0000 (11:51 +0000)]
* config/tc-rx.c (rx_include): Rename 'eof' to 'last_char' in
order to avoid conflict with same named variable in MinGW system
header file.

10 years ago * peXXigen.c (rsrc_print_section): Use ptrdiff_t as the type for
Nick Clifton [Wed, 18 Dec 2013 10:30:25 +0000 (10:30 +0000)]
* peXXigen.c (rsrc_print_section): Use ptrdiff_t as the type for
pointer arithmetic.

10 years agoAdd target_xfer_partial_ftype
Yao Qi [Mon, 4 Nov 2013 09:53:56 +0000 (17:53 +0800)]
Add target_xfer_partial_ftype

This patch adds a typedef target_xfer_partial_ftype.  When we change
the signature of xfer_partial functions (for example, adding a new
parameter), we don't have to modify all of their declarations.

This patch also updates the type of parameters of target_xfer_partial
from "void *" to "gdb_byte *".

gdb:

2013-12-18  Yao Qi  <yao@codesourcery.com>

* target.h (target_xfer_partial_ftype): New typedef.
(target_xfer_partial): Update declaration.
* auxv.h (memory_xfer_auxv): Likewise.
* ia64-hpux-nat.c (super_xfer_partial): Likewise.
* ia64-linux-nat.c (super_xfer_partial): Likewise.
* linux-nat.c (super_xfer_partial): Likewise.
* procfs.c (procfs_xfer_partial): Likewise.
* record-full.c (record_full_beneath_to_xfer_partial):
(tmp_to_xfer_partial): Likewise.
* sparc-nat.c (inf_ptrace_xfer_partial): Likewise.
* target.c (default_xfer_partial): Likewise.
(current_xfer_partial): Likewise.
(target_xfer_partial): Change parameter type to 'gdb_byte *'.

10 years agoReplace sprintf with xsnprintf
Yao Qi [Mon, 4 Nov 2013 03:16:37 +0000 (11:16 +0800)]
Replace sprintf with xsnprintf

gdb:

2013-12-18  Yao Qi  <yao@codesourcery.com>

* linux-nat.c (linux_proc_xfer_partial): Call xsnprintf instead
of sprintf.
(linux_nat_detach, linux_child_pid_to_exec_file): Likewise.
(linux_proc_pending_signals): Likewise.

10 years agoFix the format of one ChangeLog entry
Yao Qi [Wed, 18 Dec 2013 03:30:54 +0000 (11:30 +0800)]
Fix the format of one ChangeLog entry

I notice that two lines of a recent changelog entry are not prefixed
with tab.  They are prefixed with a space and a tab.  This patch
is to remove the space.

gdb:

2013-12-18  Yao Qi  <yao@codesourcery.com>

* ChangeLog: Fix the format of one entry.

10 years agoAdd system register and embedded debug register support.
Kuan-Lin Chen [Thu, 12 Dec 2013 05:43:51 +0000 (13:43 +0800)]
Add system register and embedded debug register support.
Add two more as test files for user special and system register.
Fix typo.

2013-12-17  Kuan-Lin Chen  <kuanlinchentw@gmail.com>

* gas/nds32/nds32.exp: Add system and user special register tests.
* gas/nds32/sys-reg.s: New test.
* gas/nds32/sys-reg.d: Likewise.
* gas/nds32/usr-spe-reg.s: Likewise.
* gas/nds32/usr-spe-reg.d: Likewise.
* gas/nds32/alu-2.d: Delete the new blank line at EOF.
* gas/nds32/br-1.d: Likewise.
* gas/nds32/br-2.d: Likewise.
* gas/nds32/ji-jr.d: Likewise.
* gas/nds32/lsi.d: Likewise.
* nds32-dis.c (sr_map): Add system register table for disassembling.
(usr_map): Fix typo.
* nds32-asm.c (keyword_sr): Add embedded debug registers.

10 years agoARI fix in value.c::value_entirely_unavailable
Joel Brobecker [Wed, 18 Dec 2013 02:42:49 +0000 (06:42 +0400)]
ARI fix in value.c::value_entirely_unavailable

gdb/ChangeLog:

        * value.c (value_entirely_unavailable): ARI fix: Move trailing
        binary operator to the next line.  No actual code change.

10 years agodaily update
Alan Modra [Tue, 17 Dec 2013 23:00:45 +0000 (09:30 +1030)]
daily update

10 years agoCall _bfd_elf_post_process_headers
H.J. Lu [Tue, 17 Dec 2013 22:36:45 +0000 (14:36 -0800)]
Call _bfd_elf_post_process_headers

* elf32-arm.c (elf32_arm_post_process_headers): Call
_bfd_elf_post_process_headers.

10 years agoCall _bfd_elf_post_process_headers
H.J. Lu [Tue, 17 Dec 2013 22:10:03 +0000 (14:10 -0800)]
Call _bfd_elf_post_process_headers

* elf32-spu.c (spu_elf_post_process_headers): Call
_bfd_elf_post_process_headers.
* elfxx-mips.c (_bfd_mips_post_process_headers): Likewise.

10 years agoDefault elf_backend_post_process_headers to set OSABI
H.J. Lu [Tue, 17 Dec 2013 21:40:46 +0000 (13:40 -0800)]
Default elf_backend_post_process_headers to set OSABI

* elf-bfd.h (_bfd_elf_set_osabi): Renamed to ...
(_bfd_elf_post_process_headers): This.
* elf.c (_bfd_elf_compute_section_file_positions): Always
call elf_backend_post_process_headers.
(_bfd_elf_set_osabi): Renamed to ...
(_bfd_elf_post_process_headers): This.
* elf32-hppa.c (elf_backend_post_process_headers): Removed.
* elf32-i370.c (elf_backend_post_process_headers): Likewise.
* elf32-msp430.c (elf_backend_post_process_headers): Likewise.
* elf32-ppc.c (elf_backend_post_process_headers): Likewise.
* elf32-sparc.c (elf_backend_post_process_headers): Likewise.
* elf64-hppa.c (elf_backend_post_process_headers): Likewise.
* elf64-ppc.c (elf_backend_post_process_headers): Likewise.
* elf64-sparc.c (elf_backend_post_process_headers): Likewise.
* elf64-x86-64.c (elf_backend_post_process_headers): Likewise.
*  (elf_backend_post_process_headers): Likewise.
*  (elf_backend_post_process_headers): Likewise.
* elf32-i386.c (elf_backend_post_process_headers): Don't
define as _bfd_elf_set_osabi.
(elf_i386_fbsd_post_process_headers): Updated.
* elf32-mips.c (elf_fbsd_post_process_headers): Removed.
(elf_backend_post_process_headers): Likewise.
* elf32-tic6x.c (elf32_tic6x_set_osabi): Removed.
(elf_backend_post_process_headers): Likewise.
* elf64-mips.c (elf_fbsd_post_process_headers): Removed.
(elf_backend_post_process_headers): Likewise.
* elfn32-mips.c (elf_fbsd_post_process_headers): Removed.
(elf_backend_post_process_headers): Likewise.
* elfnn-aarch64.c (elfNN_aarch64_post_process_headers): Updated.
* elfxx-target.h (elf_backend_post_process_headers): Default
to _bfd_elf_post_process_headers.

10 years ago"tfind" across unavailable-stack frames.
Pedro Alves [Tue, 17 Dec 2013 20:47:36 +0000 (20:47 +0000)]
"tfind" across unavailable-stack frames.

Like when stepping, the current stack frame location is expected to be
printed as result of tfind command, if that results in moving to a
different function.  In tfind_1 we see:

  if (from_tty
      && (has_stack_frames () || traceframe_number >= 0))
    {
      enum print_what print_what;

      /* NOTE: in imitation of the step command, try to determine
         whether we have made a transition from one function to
         another.  If so, we'll print the "stack frame" (ie. the new
         function and it's arguments) -- otherwise we'll just show the
         new source line.  */

      if (frame_id_eq (old_frame_id,
                       get_frame_id (get_current_frame ())))
        print_what = SRC_LINE;
      else
        print_what = SRC_AND_LOC;

      print_stack_frame (get_selected_frame (NULL), 1, print_what, 1);
      do_displays ();
    }

However, when we haven't collected any registers in the tracepoint
(collect $regs), that doesn't actually work:

 (gdb) tstart
 (gdb) info tracepoints
 Num     Type           Disp Enb Address    What
 1       tracepoint     keep y   0x080483b7 in func0
                                            at ../.././../git/gdb/testsuite/gdb.trace/circ.c:28
         collect testload
     installed on target
 2       tracepoint     keep y   0x080483bc in func1
                                            at ../.././../git/gdb/testsuite/gdb.trace/circ.c:32
         collect testload
     installed on target
 (gdb) c
 Continuing.

 Breakpoint 3, end () at ../.././../git/gdb/testsuite/gdb.trace/circ.c:72
 72    }
 (gdb) tstop
 (gdb) tfind start
 Found trace frame 0, tracepoint 1
 #0  func0 () at ../.././../git/gdb/testsuite/gdb.trace/circ.c:28
 28    }
 (gdb) tfind
 Found trace frame 1, tracepoint 2
 32    }
 (gdb)

When we don't have info about the stack available
(UNWIND_UNAVAILABLE), frames end up with outer_frame_id as frame ID.
And in the scenario above, the issue is that both frames before and
after the second tfind (the frames for func0 an func1) have the same
id (outer_frame_id), so the frame_id_eq check returns false, even
though the frames were of different functions.  GDB knows that,
because the PC is inferred from the tracepoint's address, even if no
registers were collected.

To fix this, this patch adds support for frame ids with a valid code
address, but <unavailable> stack address, and then makes the unwinders
use that instead of the catch-all outer_frame_id for such frames.  The
frame_id_eq check in tfind_1 then automatically does the right thing
as expected.

I tested with --directory=gdb.trace/ , before/after the patch, and
compared the resulting gdb.logs, then adjusted the tests to expect the
extra output that came out.  Turns out that was only circ.exp, the
original test that actually brought this issue to light.

Tested on x86_64 Fedora 17, native and gdbserver.

gdb/
2013-12-17  Pedro Alves  <palves@redhat.com>

* frame.h (enum frame_id_stack_status): New enum.
(struct frame_id) <stack_addr>: Adjust comment.
<stack_addr_p>: Delete field, replaced with ...
<stack_status>: ... this new field.
(frame_id_build_unavailable_stack): Declare.
* frame.c (frame_addr_hash, fprint_field, outer_frame_id)
(frame_id_build_special): Adjust.
(frame_id_build_unavailable_stack): New function.
(frame_id_build, frame_id_build_wild): Adjust.
(frame_id_p, frame_id_eq, frame_id_inner): Adjust to take into
account frames with unavailable stack.

* amd64-tdep.c (amd64_frame_this_id)
(amd64_sigtramp_frame_this_id, amd64_epilogue_frame_this_id): Use
frame_id_build_unavailable_stack.
* dwarf2-frame.c (dwarf2_frame_this_id): Likewise.
* i386-tdep.c (i386_frame_this_id, i386_epilogue_frame_this_id)
(i386_sigtramp_frame_this_id):  Likewise.

gdb/testsuite/
2013-12-17  Pedro Alves  <palves@redhat.com>

* gdb.trace/circ.exp: Expect frame info to be printed when
switching between frames with unavailable stack, but different
functions.

10 years agoUse _bfd_elf_copy_private_bfd_data
H.J. Lu [Tue, 17 Dec 2013 19:48:18 +0000 (11:48 -0800)]
Use _bfd_elf_copy_private_bfd_data

PR binutils/16318
* elf32-arm.c (elf32_arm_copy_private_bfd_data): Call
_bfd_elf_copy_private_bfd_data.
* elf32-bfin.c (bfin_elf_copy_private_bfd_data): Removed.
(elf32_bfinfdpic_copy_private_bfd_data): Likewise.
(bfd_elf32_bfd_copy_private_bfd_data): Don't define.
* elf32-frv.c (frv_elf_copy_private_bfd_data): Removed.
(elf32_frvfdpic_copy_private_bfd_data): Likewise.
(bfd_elf32_bfd_copy_private_bfd_data): Don't define.
* elf32-iq2000.c (iq2000_elf_copy_private_bfd_data): Removed.
(bfd_elf32_bfd_copy_private_bfd_data): Don't define.
* elf32-lm32.c (lm32_elf_copy_private_bfd_data): Removed.
(lm32_elf_fdpic_copy_private_bfd_data): Call
_bfd_elf_copy_private_bfd_data.
* elf32-mep.c (mep_elf_copy_private_bfd_data): Removed.
(bfd_elf32_bfd_copy_private_bfd_data): Don't define.
* elf32-msp430.c (elf32_msp430_copy_private_bfd_data): Removed.
(bfd_elf32_bfd_copy_private_bfd_data): Don't define.
* elf32-mt.c (mt_elf_copy_private_bfd_data): Removed.
(bfd_elf32_bfd_copy_private_bfd_data): Don't define.
* elf32-sh.c (sh_elf_set_private_flags): Removed.
(sh_elf_copy_private_data): Call _bfd_elf_copy_private_bfd_data
and sh_elf_set_mach_from_flags.
*  elfnn-aarch64.c (elfNN_aarch64_copy_private_bfd_data): Removed.
(bfd_elfNN_bfd_copy_private_bfd_data): Don't define.

10 years agoRename index to indx
H.J. Lu [Tue, 17 Dec 2013 18:10:16 +0000 (10:10 -0800)]
Rename index to indx

* peXXigen.c (rsrc_process_section): Rename index to indx.

10 years agoConvert the unavailable vector to be bit, not byte, based.
Andrew Burgess [Tue, 17 Dec 2013 17:18:44 +0000 (17:18 +0000)]
Convert the unavailable vector to be bit, not byte, based.

  https://sourceware.org/ml/gdb-patches/2013-12/msg00144.html

The vector of unavailable parts of a value is currently byte based.  Given
that we can model a value down to the bit level, we can potentially loose
information with the current implementation.  After this patch we model the
unavailable information in bits.

gdb/ChangeLog

* dwarf2loc.c (read_pieced_value): Mark bits, not bytes
unavailable, use correct bit length.
* value.c (struct value): Extend comment on unavailable to
indicate that it is bit based.
(value_bits_available): New function.
(value_bytes_available): Call value_bits_available.
(value_entirely_available): Check against the bit length, not byte
length.
(mark_value_bits_unavailable): New function.
(mark_value_bytes_unavailable): Move contents to
mark_value_bits_unavailable, call to same.
(memcmp_with_bit_offsets): New function.
(value_available_contents_bits_eq): New function, takes the
functionality from value_available_contents_eq but uses
memcmp_with_bit_offsets now, and is bit not byte based.
(value_available_contents_eq): Move implementation into
value_available_contents_bits_eq, call to same.
(value_contents_copy_raw): Work on bits, not bytes.
(unpack_value_bits_as_long_1): Check availability in bits, not
bytes.
* value.h (value_bits_available): Declare new function.
(mark_value_bits_unavailable): Declare new function.

gdb/testsuite/ChangeLog

* gdb.trace/unavailable-dwarf-piece.c: New file.
* gdb.trace/unavailable-dwarf-piece.exp: New file.

10 years agoProperly handle ljmp/lcall with invalid MODRM byte
Michael Zolotukhin [Tue, 17 Dec 2013 17:06:57 +0000 (09:06 -0800)]
Properly handle ljmp/lcall with invalid MODRM byte

gas/testsuite/

2013-12-17  Michael Zolotukhin  <michael.v.zolotukhin@gmail.com>

* gas/i386/disassem.s: New.
* gas/i386/disassem.d: Likewise.
* gas/i386/x86-64-disassem.s: Likewise.
* gas/i386/x86-64-disassem.d: Likewise.
* gas/i386/i386.exp: Run disassem and x86-64-disassem.

opcodes/

2013-12-17  Michael Zolotukhin  <michael.v.zolotukhin@gmail.com>

* i386-dis.c (MOD_FF_REG_3): New.
(MOD_FF_REG_5): Likewise.
(mod_table): Add MOD_FF_REG_3 and MOD_FF_REG_5.
(reg_table): Use MOD_FF_REG_3 and MOD_FF_REG_5.

10 years ago * peXXigen.c: Include wchar.h if available.
Nick Clifton [Tue, 17 Dec 2013 15:39:13 +0000 (15:39 +0000)]
* peXXigen.c: Include wchar.h if available.
Include safe-ctype.h.
(HighBitSet, SetHighBit, WithoutHighBit): New macros.
(pe_print_resource_entries): Rename to
rsrc_print_resource_entries.  Handle names that are not RVAs.
(pe_print_resource_directory): Rename to
rsrc_print_resource_directory.
(pe_print_rsrc): Rename to rsrc_print_section.  Corrupt
computation of RVA bias.
(rsrc_count_entries): New function.
(rsrc_count_directory): New function.
(rsrc_parse_entry): New function.
(rsrc_parse_entries): New function.
(rsrc_parse_directory): New function.
(rsrc_write_string): New function.
(rsrc_compute_rva): New function.
(rsrc_write_leaf): New function.
(rsrc_write_entry): New function.
(rsrc_write_directory): New function.
(u16_mbtouc): New function.
(rsrc_cmp): New function.
(rsrc_print_name): New function.
(rsrc_resource_name): New function.
(rsrc_merge_string_entries): New function.
(rsrc_sort_entries): New function.
(rsrc_attach_chain): New function.
(rsrc_merge): New function.
(rsrc_process_section): New function - merges the contents of a
.rsrc section.
(_bfd_XXi_final_link_postscript): Call rsrc_process_section.
* configure.in (AC_CHECK_HEADERS): Add wchar.h
* config.in: Regenerate.
* configure: Regenerate.

10 years agodaily update
Alan Modra [Mon, 16 Dec 2013 23:00:38 +0000 (09:30 +1030)]
daily update