intel/perf: store query symbol name

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke's avatarKenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6438>

nir/load_store_vectorizer: Clean up unit test swizzle assertions.

They're hard to write and read, so put together a little helper to clean
up both the code and the gtest output on failure.

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6431>

freedreno/ir3: Replace our custom vec4 UBO intrinsic with the shared lowering.

This gets us fewer comparisons in the shaders that we need to optimize
back out, and reduces backend code.

total instructions in shared programs: 11547270 -> 7219930 (-37.48%)
total full in shared programs: 334268 -> 319602 (-4.39%)

Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6378>

nir: Add a lowering pass for backends wanting load_ubo with vec4 offsets.

This is very common for backends -- r600, freedreno, and nir_to_tgsi all
needed versions of it.  Make a common intrinsic to use for it with a
shared, slightly-tuned-from-ir3 lowering pass.

Reviewed-by: Gert Wollny <gert.wollny@collabora.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6378>

nir: Add nir_[iu]shr_imm and nir_udiv_imm helpers and use them.

I was doing math manually in a lowering pass for converting a division to
a ushr, and this will let the pass be expressed more naturally.

Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6378>

nir: Make the nir_builder *_imm helpers consistently handle bit size.

We always want to demote the y to the bit size of the ssa def, but also
want to sanity check that our input and our masking is big enough.

Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6378>

aco: Fix convert_to_SDWA when instruction has 3 operands.

Previously, when the instruction had 3 operands, this would cause
possible corruption because of writing to sdwa->sel[2].
This was noticed thanks to GCC 10's -Wstringop-overflow warning.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6436>

aco: Fix unused variable warning by adding ASSERTED.

Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6436>

r300: Use util_blend_factor_uses_dest

v2: Fix missing { and #include (trivial)

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net> [v1]
Reviewed-by: Marek Olšák <marek.olsak@amd.com> [v1]
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6407>

si: Use util_blend_factor_uses_dest

Driver-local copy is redundant.

v2: Fix missing #include (trivial)

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net> [v1]
Reviewed-by: Marek Olšák <marek.olsak@amd.com> [v1]
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6407>

gallium: Add util_blend_uses_dest helper

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6407>

gallium: Add util_blend_factor_uses_dest helper

Drivers may be able to optimize cases where blending is enabled but the
destination colour is not used. This helps detect that case.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6407>

radv: use the trap handler to detect faulty shaders/instructions

It should reliably report the faulty shader but the faulty instruction
is inacurate, especially for memory violations because it's reported
when the addr is processed. It will be improved by emitting more
wait-states.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6384>

radv: enable the trap handler and configure the shader exceptions

When TRAP_PRESENT is not enabled, all traps and exceptions are ignored.
Only EXCP_EN.mem_viol is currently supported because the other
exceptions have to be tested/validated first.

EXCP_EN.mem_viol is used to detect any sort of invalid memory
access like VM fault. When a memory violation is reported, the
hw jumps to the trap handler.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6384>

radv: add initial trap handler support with RADV_TRAP_HANDLER=1

A trap handler is used to handle shader exceptions like memory
violations, divide by zero etc. The trap handler shader code will
help to identify the faulty shader/instruction and to report
more information for better debugging.

This has only been tested on GFX8, though it should work on GFX6-GFX7.
It seems we need a different implemenation for GFX9+.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6384>

radv: add a small interface for creating the trap handler shader

Similar to the GS copy shader except that NIR is unused because
the shader is written directly using ACO IR.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6384>

aco: skip unnecessary compiler pass for the trap handler program

The shader is written by hands with assigned registers, so most of
the pass are unnecessary.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6384>

aco: add a helper for building a trap handler shader

It's way easier to write a trap handler shader using ACO IR
instead of writing disassembly by hand + clrxasm + copy&paste.

This trap handler is quite simple for now, it just loads a
buffer descriptor from the TMA BO, it saves ttmp0-1 which
contain various info about the faulty instruction, and it
stores some hw registers about the wave/trap status.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6384>

aco: validate that SMEM operands can use fixed registers

To fix a validation error when loading the scalar tma buffer
descriptor because it's not a temp but a fixed reg (tma_lo/tma_hi).

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6384>

aco: add TBA/TMA/TTMP0-11 physical registers definitions

The TBA/TMA scalar registers are only available on GFX6-GFX8.

On GFX9+, TBA/TMA addr are stored in hardware registers and
the number of TTMP scalar registers is thus increased by 4.
Just keep in mind that tba_lo is actually ttmp0. Best would
be to support ttmp registers in RA but that's more complicated.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6384>

amd/registers: add some SQ_WAVE_* register definitions

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6384>

amd/registers: add missing TBA registers on GFX6-GFX8

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6384>

nir: add iabs-lowering code

Microsoft's DXIL is based on LLVM, which doesn't have an integer ABS
opcode, but instead needs it lowered to NEG + MAX. We need to do this
with an option, to prevent an already existing optimization rule from
undoing this.

Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5211>

egl: drop invalid shebang

This file exports a variable that is then used in a python script,
but it can never be executed by itself, so having a shebang here
makes no sense.

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6166>

clover: Call clang with -O0 for the SPIR-V path

SPIRV-LLVM-Translator isn't really built for handling optimized LLVM IR.
It tends to fall over when, for instance, an optimization generates an
i96 type which isn't legal in SPIR-V.  Pass -O0 to avoid these cases.
See https://github.com/KhronosGroup/SPIRV-LLVM-Translator/issues/203.

Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6432>

clover/spirv: Don't call llvm::regularizeLlvmForSpirv

writeSpirv() already takes care of that, and calling it twice seems to
duplicate functions and cause problems when processing execution modes.

Fixes: 2043c5f37cf "clover/llvm: Add functions for compiling from..."
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pierre Moreau <dev@pmoreau.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6306>

intel/nir: Allow splitting a single load into up to 32 loads

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6405>

intel/fs: Fix an assert in load_scratch

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6405>

iris: Always re-upload sysvals when we have kernel inputs

They can change on every dispatch and clover never gives us a heads up.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6405>

iris: Normalize all compute shaders to MESA_SHADER_COMPUTE

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6405>

iris: ref/unref the GLSL type singleton in screen_create/destroy

Otherwise, we can run into trouble if the driver is dynamically loaded
via pipe-loader.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6405>

iris: Stop advertising clover-only caps

Both of these are clover-only caps.  We don't really support clover and,
even if we did, the number of address bits is wrong and we definitely
don't support the CL path for images.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6405>

iris: Stop advertising PIPE_SHADER_IR_NIR_SERIALIZED

This prevents clover from trying to initialize and crashing.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6405>

clover/nir: add support for global invocation id offsets

v2: create variables only once

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Jesse Natalie <jenatali@microsoft.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5891>

nir: fix nir_variable_create for kernels

We ended up with INTERP_MODE_SMOOTH but we really just want to have NONE.

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5891>

spirv: Use new global invocation offset system value

Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5891>

nir: Add options to nir_lower_compute_system_values to control compute ID base lowering

If no options are provided, existing intrinsics are used.
If the lowering pass indicates there should be offsets used for global
invocation ID or work group ID, then those instructions are lowered to
include the offset.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5891>

nir: Move compute system value lowering to a separate pass

The actual variable -> intrinsic lowering stays where it is, but
ops which convert one intrinsic to be implemented in terms of
another have moved.

Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5891>

compiler/nir: make lowering global-id to local-id optional

For D3D12, we don't want to lower this, as there's a dedicated global-id
system-value that might be faster to use, depending on the hardware.

Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5891>

nir: Add new system values and intrinsics for dealing with CL work offsets

New intrinsics are added for global invocation IDs and work group IDs to
deal with offsets in both. The only one of these that needs a system value
is global invocation offset, for CL's get_global_offset().

Note that CL requires very large work group sizes, so these intrinsics
are modified to be able to use 64bit values, for 64bit SPIR-V.

Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5891>

nir: Populate some places where existing system values were missing

Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5891>

ci/bare-metal: Try rebooting chezas again if they get stuck during tftp.

Occasionally something goes weird in the network and a group of chezas
will produce streams of these errors during the tftp process, eventually
timing out after 60 minutes in the job.  By the time we notice, the next
jobs seem to go through fine, so watch for them and try rebooting the
cheza to see if that gets our jobs to pass again.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6398>

ci/bare-metal: Retry booting chezas instead of failing when !POWER_GOOD

If we get this error, we can just try rebooting again and see if it comes
up then.  The POWER_GOOD failures are clustered in time, but it's better
to retry a few times in a row in one job (which has its own 60min timeout)
than to spuriously fail someone's pipeline.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6398>

ci/bare-metal: Convert the main cros-servo boot code to python

Switching this part to python makes the code clearer and cleans up our
logs as well.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6398>

ci/bare-metal: Use a new serial buffer tool.

This one uses python threads to move some of our logic from shell
pipelines to python, and opens the door to doing better serial output
tracking in the future (the SerialBuffer.lines() method)

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6398>

virgl: update protocol headers

Copied from virglrenderer.  Some in-development features are guarded by
VIRGL_RENDERER_UNSTABLE_APIS and they should not be used without knowing
the consequences.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6235>

virgl: move protocol headers to a common place

Tested with meson.  Android.mk changes are not tested.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6235>

util/ralloc: fix ralloc alignment.

On some malloc implementation, malloc doesn't always align to 16
bytes even on 64 bits system. To make sure ralloc_header always
starts at the wanted alignment, just force the size to be aligned at
the alignment of ralloc_header. This fixes crashed on instruction
like "movaps %xmm0,0x10(%rax)" which requires aligned memory access.

Signed-off-by: Lepton Wu <lepton@chromium.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6314>

svga: fix draw elements with 8-bits indices

With commit 2122b902b80, u_index_translator can return U_TRANSLATE_MEMCPY
for 8-bits indices, and in this case we need to call the translation function
instead of a simple passthrough to the device.

Fixes piglit spec@nv_primitive_restart tests.

Fixes: 2122b902b8 "gallium/indices: don't expand prim-type for 8-bit indices"
Reviewed-by: Neha Bhende <bhenden@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6414>

winsys/svga: fix display corruption after surface_init

When we initialize the buffer surface, do not map the existing storage
with DONTBLOCK, leave it as a synchronized map.
This patch also sets the surface rebind flag after it is bound to a
new buffer and sets the surface buffer pointer accordingly.

This fixes display corruption issue seen with running steam.

Reviewed-by: Neha Bhende <bhenden@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6415>

st/mesa: increase size of gl_register_file bitfields

Bump up the size of the bitfields for gl_register_file type for MSVC.
Also add ASSERT_BITFIELD_SIZE check where this bitfield is used.

Fixes spec@arb_shader_atomic_counter_ops tests in MSVC.

Reviewed-by: Neha Bhende <bhenden@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6417>

nir: rename nir_op_fne to nir_op_fneu

It was always fneu but naming it fne causes confusion from time to time. So
lets rename it. Later we also want to add other unordered and fne, this is
a smaller preparation for that.

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6377>

bifrost: use nir_intrinsic_has_type

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6402>

aco: use nir_intrinsic_has_access

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6402>

nir: add and use nir_intrinsic_has_ helpers

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6402>

aco: fix non-rtz pack_half_2x16

We were using the wrong conversion opcode. The high bits are also not
zero'd on GFX10, which can cause v_cvt_pk_u16_u32 to clamp.

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Fixes: df645fa369d ('aco: implement VK_KHR_shader_float_controls')
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6346>

glsl: Eliminate out-of-bounds triop_vector_insert

Section 5.11 (Out-of-Bounds Accesses) of the GLSL 4.60 spec says:

 "In the subsections described above for array, vector, matrix and
  structure accesses, any out-of-bounds access produced undefined
  behavior.... Out-of-bounds writes may be discarded or overwrite
  other variables of the active program."

Fixes crashes when dereferencing gl_ClipDistance and gl_TessLevel*, e.g:

  int index = -1;
  gl_ClipDistance[index] = -1;

When LowerCombinedClipCullDistance is true.

CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6363>

glsl: Eliminate assigments to out-of-bounds elements of vector

Several optimization paths, including constant folding, can lead to
indexing vector with an out of bounds index.

Out-of-bounds writes could be eliminated per spec:

Section 5.11 (Out-of-Bounds Accesses) of the GLSL 4.60 spec says:

"In the subsections described above for array, vector, matrix and
 structure accesses, any out-of-bounds access produced undefined
 behavior.... Out-of-bounds writes may be discarded or overwrite
 other variables of the active program."

Fixes piglit tests:
spec@glsl-1.20@execution@vector-out-of-bounds-access@fs-vec4-out-of-bounds-1
spec@glsl-1.20@execution@vector-out-of-bounds-access@fs-vec4-out-of-bounds-6

CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6363>

ir_constant: Return zero on out-of-bounds vector accesses

Several optimization paths, including constant folding, can lead to
accessing an ir_constant vector with an out of bounds index.

Return 0 since GL_ARB_robustness and GL_KHR_robustness encourage
us to do so.

Fixes piglit tests:
spec@glsl-1.20@execution@vector-out-of-bounds-access@fs-vec4-out-of-bounds-2
spec@glsl-1.20@execution@vector-out-of-bounds-access@fs-vec4-out-of-bounds-4
spec@glsl-1.20@execution@vector-out-of-bounds-access@fs-vec4-out-of-bounds-5

Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/2604
CC: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6363>

anv: support fd==-1 in ImportSemaphoreFdKHR

If fd==-1 is passed in ImportSemaphoreFdKHR, instead of importing the
fd, in creates an already signaled syncobj.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6427>

aco: add ACO_DEBUG=force-waitcnt to emit wait-states

Sounds useful for debugging missing wait-states and for improving
detection of the faulty instruction in case of memory violations.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6386>

wgl: Switch to Win10 version defines to enable usage of Win10 WGL callbacks

Reviewed-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6228>

radv: ignore BB labels when splitting the disassembly string

Ignore everything that is not an instruction. This should fix
the annotated UMR disassembly.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6387>

anv: take depth in to account in anv_GetImageSubresourceLayout

Fixes dEQP-VK.image.subresource_layout.3d* tests on gen9.

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6400>

iris: Add missing newline to debug log message

Without this newline, log messages get lumped together on a single line,
making the debug log difficult to read.

Reviewed-by: Mark Janes <mark.a.janes@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6413>

ci/freedreno: List more common flakes reported recently.

Now that adding to our flakes list won't disturb the test order
(potentially just moving the flake to a different result), we can be more
aggressive in listing new flakes.

Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6392>

ci/freedreno: Move our skips lists over to being known-flakes lists.

This makes sure that we keep executing the tests so that we can get our
alerts in IRC and know whether the tests are still flaking.  It also keeps
us from having adjustments to the skip list causing failures/flakes to
move to different tests (as seen with a530 having to move some xfails
around after changing the skip list)

Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6392>

ci/deqp-runner: Add a post-deqp-run filter list for known flakes.

So far, we've been putting our known flakes that intermittently fail CI
into the skips list.  This has two downsides:

1) You don't know when the flakes stop happening and when to delist them
   from skips, unless you go do a bunch of manual runs with the skips list
   cleared.

2) If the flake was because the previous test left some broken state in
   the HW, you may just move your intermittent to a new test.

With this new path, you can list your flakes in the flakes file to keep
them from erroring out people's pipelines.  They still get run and
reported as is.

Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6392>

ci/deqp-runner: Drop unused "count" variable

Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6392>

ci/deqp-runner: Drop stale comment from deqp-runner.sh.

We don't rerun to detect flakes ourselves any more since the runner does
it internally.

Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6392>

nir: Use 'unsigned' instead of enum types in nir_variable::data

MSVC treats enums as signed, so storing values that use the topmost
bit of the explicitly sized field loads as a negative value instead.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6393>

nir: Add an LOD parameter to image_*_size

The OpenCL image_width/height/depth functions have variants which can
take an LOD parameter.  More importantly, LLVM-SPIRV-Translator always
generates OpImageQuerySizeLod even if the LOD is guaranteed to be zero.
Given that over half the hardware out there has an LOD field for image
size queries (based on a rudimentary scan through their NIR -> whatever
code), we may as well just add the source to the NIR intrinsic.  If this
is ever a problem for anyone, the lowering is pretty trivial.

I've also added asserts to everyone's drivers that should alert them if
they ever see an LOD other than zero.  This will never happen with GL or
Vulkan so there's no need for panic.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6396>

broadcom/compiler: Enable PER_QUAD for UBO and SSBO loads.

Helper invocations need to be able to read from UBOs since those values
can be used for flow control, but writes from helper invocations need to
be dropped.

Fixes CTS tests:
  dEQP-VK.glsl.derivate.*.uniform_loop.*

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6356>

broadcom/compiler: Add a constant folding pass after nir_lower_io

The nir_lower_io pass produces a bunch of constant arithmetic, and
assumes that constant folding will simplify it away.

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6356>

broadcom/compiler: support nir_intrinsic_load_sample_id

This adds support for the intrinsic as well as the vir_SAMPID
instruction that corresponds to it in vir.

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6356>

clover/spirv: pass list of supported extensions to the translator

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Pierre Moreau <dev@pmoreau.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5038>

clover/nir: Register callback for translation messages (v2)

This allows us to add SPIR-V to NIR translation failure messages to the
program’s compilation log, which can then be queried by the user.

v2: Replace the if-statement in `debug_function()` with an assert.

Signed-off-by: Pierre Moreau <dev@pmoreau.org>
Reviewed-by: Serge Martin <edb@sigluy.net>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5038>

clover/llvm: Use the highest supported SPIR-V version (v4)

v2:
   a) Move `supported_spirv_verssions()` to `spirv::` (Francisco Jerez)
   b) Introduce a `SPV_MAKE_VERSION` macro to avoid making mistakes and
     making it more readable than its uint representation.
v3: Replaced an if-statement with a `std::min()` in
    `spirv::get_spirv_translator_options()` (Karol Herbst)
v4: Turn `SPV_MAKE_VERSION()` into a function (Francisco Jerez)

Signed-off-by: Pierre Moreau <dev@pmoreau.org>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5038>

meson: Raise minimum version for SPIR-V OpenCL deps (v4)

SPIRV-LLVM-Translator had API-breaking changes during version 0.2.1.
Since the new API was being used, a higher version has to be requested.

While at it and since SPIRV-LLVM-Translator added a new API to request a
specific SPIR-V version as well as allowed SPIR-V extensions, increase
the version number to the first including those new features.

v2: Require an LLVM version which is compatible with the
    SPIRV-LLVM-Translator that was found; that requirement was
    previously implicit and would be ensured when that library was
    built. Making it explicit will help in cases where multiple versions
    of LLVM might be installed.
v3: fix use of undefined _minimum_llvmspirvlib_version_array
v4 (Karol): fix creating the minimum requested version
            Simplifing the code

Signed-off-by: Pierre Moreau <dev@pmoreau.org>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Serge Martin <edb@sigluy.net>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5038>

clover/spirv: Print linked SPIR-V module if asked

Signed-off-by: Pierre Moreau <dev@pmoreau.org>
Reviewed-by: Serge Martin <edb@sigluy.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5038>

clover/spirv: Remove unused tuple header

Fixes: 21473865050 ("clover/spirv: Add functions for parsing arguments, linking programs, etc.")
Signed-off-by: Pierre Moreau <dev@pmoreau.org>
Reviewed-by: Serge Martin <edb@sigluy.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5038>

clover/spirv: rework handling of spirv extensions

What extensions we support depends on spirv_to_nir but it doesn't give us a
list. So hardcode one and add extensions we know we support and hit in the
wild.

v2: move into spirv lib

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Pierre Moreau <dev@pmoreau.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5038>

panfrost: Fix alignment on Bifrost

This was real "fun" to debug...

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Fixes: 373a204bdd7 ("panfrost: Pass alignments explicitly")
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6410>

tu: Enable VK_KHR_multiview

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5720>

tu: Implement multiview pipeline state

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5720>

tu: Add multiview lowering pass

For now this only handles an a630 quirk where PC_MULTIVIEW_MASK doesn't
exist. However in the future it will also handle multi-position output.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5720>

tu: Implement multiview query interactions

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5720>

tu: Improve timestamp queries

As the original comment says, we can't really give the user what they
want if there's a timestamp inside a GMEM renderpass, but we can give
them a better approximation of it. At least sysmem renderpasses will now
have an accurate timestamp.

Also, don't emit the WFI if it's not necessary, based on the stage
flags.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5720>

tu: Implement multiview clear/resolve interactions

Loads, stores, clears, and resolves now happen per-view. Since we only
support multiview with sysmem rendering, we only implement this for
sysmem clears and resolves.

There aren't any tests that mix multiview and MSAA, so no coverage of
the resolve path.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5720>

tu: Parse multiview render pass info

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5720>

tu: Translate VkRenderPassMultiviewCreateInfo to VkRenderPassCreateInfo2

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5720>

ir3: Add support for gl_ViewIndex in VS & FS

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5720>

freedreno/a6xx: Add multiview registers

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5720>

freedreno/a6xx: disable LRZ when color channels are masked

From the PoV of early-z tests, having masked color channels is basically
like blend, ie. we do actually care about the fragments (or at least
parts of them) from previous draws.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6409>

freedreno/cffdump: add arg to filter by process name

Usueful when you have a cmdstream trace which consists of multiple
different processes.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6409>

nir: Shrink store intrinsic num_components to the size used by the writemask.

This cuts a bunch of vector setup for undef components in the i965 vec4
backend.  Noticed while looking into codegen regressions in nir-to-tgsi.

brw results:
total instructions in shared programs: 3893221 -> 3881461 (-0.30%)
total cycles in shared programs: 113792154 -> 113810288 (0.02%)

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6054>

nir: Expand opt_undef to handle undef channels in a store intrinsic.

Instead of only handling all-undef stores, shrink the writemask to just
the defined channels.  Cleans up a bunch of writemasks on prog_to_nir
output in particular.

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6054>

nir/opt_undef: Handle a couple more normal store intrinsics.

They've got the value in the same slot as the others, and the same undef
behavior should be fine.

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6054>

radv: Move nir_opt_shrink_vectors() into the opt loop.

Upcoming changes to opt_undef will result in this pass doing more work and
generating vector MOVs that need re-scalarizing (which is inside of the
main opt loop).

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6054>

panfrost: Reduce attribute buffer allocations

With vertex ID / instance ID in use, vs->attribute_count will be
expanded appropriately. Without them in use, everything is 1:1 (or 1:2
in the worst case of NPOT everything).

Down to 3 slabs + 64184 bytes.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6373>