git.libre-soc.org Git - buildroot.git/log

manual: file organization: avoid unnecessary indirection

Some source files of the manual merely contain inclusion of other files.
Especially at top-level this is unnecessary, and one could just as well add
these includes in manual.txt.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

manual/user guide: rework 'Configuration of other components' chapter

This patch reworks the chapter 'Configuration of other components' as
follows:
- remove separate customize-xxx-config.txt files in favor of one shared file
  configure-other-componenents.txt
- use labeled list instead of separate sections, as the information in each
  section is limited.
- simplify instructions for busybox/uclibc thanks to the kconfig-package
  infrastructure
- rewrite instructions for Linux
- add instructions for Barebox

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

manual/user guide: move tip on configuration searches

This patch moves the tip on searching in the configuration editors into the
section 'Buildroot configuration', which is more logical.

The wording of that section is slightly adapted to fit this new part.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

manual/user guide: high-level restructuring

This patch performs some additional restructuring of the manual,
specifically in the User Guide. In detail:

- Rename 'Daily use' to 'General Buildroot usage'
- Move chapters 'make tips', 'Eclipse integration', and 'Advanced usage' as
  sections under the 'General Buildroot usage' chapter.
- Rename 'Details on Buildroot configuration' into 'Buildroot configuration'
- Rework the 'Customization' section as follows:
  - Move the short section on debugging the external toolchain wrapper into
    the rest of the explanation on external toolchains.
  - Remove the now redundant section on toolchains, as this is already
    explained in much more detail in the 'Buildroot configuration' chapter.
  - Move the sections on busybox/uclibc/kernel configuration from chapter
    'Customization' into a separate chapter 'Configuration of other
    components'.
  - Rename the remaining part of the original 'Customization' chapter into
    'Project-specific customization' and fold it together with the next
    chapter 'Storing the configuration'
- Remove the chapter 'Going further in Buildroot innards' thanks to:
  - Moving the chapter 'How Buildroot works' to the Developer guide.
  - Moving the 'Advanced Buildroot usage' section to the 'General Buildroot
    usage' chapter.
- Remove the chapter 'Hacking Buildroot' by:
  - Adding a reference to adding packages to the 'Project-specific
    customizations' chapter
  - Leaving out the explicit reference to creating board support, as this is
    part of the previous chapter already, so an extra reference is
    redundant.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

manual/getting started: minor improvements to 'Using Buildroot' section

This patch renames the section 'Using Buildroot' into 'Buildroot quick
start' as real details about Buildroot usage will be in the User Guide
rather than in 'Getting Started'.

Additionally, add a cross-reference to the section about configuring
Buildroot.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/ltris: fix linking with intl

ltris doen't build with (e)glibc toolchain since commit 454a41016f2f074b69e2c677f4749c213c653e86
when gettext package is selected.

With (e)glibc libintl is provided by the libc whereas with uClibc it's provided by gettext.

Linking with intl is only needed if the toolchain needs gettext and locale is set.

Fixes:
http://autobuild.buildroot.net/results/821/82128cb9f5cd6ae2595a8302462f1b5719dad9f7/build-end.log

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/lbreakout2: fix linking with intl

lbreakout2 doen't build with (e)glibc toolchain when gettext package is selected.

With (e)glibc libintl is provided by the libc whereas with uClibc it's provided by gettext.

Linking with intl is only needed if the toolchain needs gettext and locale is set.

Fixes:
http://autobuild.buildroot.net/results/a77/a77dd3e18cc4a5e8300ab33eb532cc03d0156f7f/build-end.log

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

usb_modeswitch: more descriptive help text

Provides a fuller description of the USB_ModeSwitch functionality for
the benefit of the otherwise clueless.

[Thomas: minor formatting and wording fixes.]

Signed-off-by: Jonathan Ben-Avraham <yba@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/xmlstarlet: fix static linking

The static linking with libxml2 and lib(e)xslt (--enable-static-libs)
need to be enabled when BR2_PREFER_STATIC_LIB is set.

Fixes:
http://autobuild.buildroot.net/results/0fd/0fd4a65ab98a4cf3fe893c29628608a71e96ecbc/build-end.log

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

tvheadend: fix undefined variable in error print

The variable "$SCRIPTNAME" is undefined; replace with "$0".

Also, fix "Stopping" spelling.

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ntp: fix undefined variable in error print

The variable "$SCRIPTNAME" is undefined; replace with "$0".

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gstreamer{, 1}: fix unaligned access detection for arc

Fixes the same issue as reported for microblaze here
http://autobuild.buildroot.net/results/f49/f4914bb3999c8a7a0c0a2afdac5de40fb9058372/

Similar to the existing handling for avr32, microblaze and xtensa.
Also add it for gstreamer1 for good measure as it was missing there as well.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

imagemagick: Disable OpenMP

By default (i.e. without adding libgomp.so* to
BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS), if an external toolchain with libgomp
support is used, then libgomp is installed to staging/ , but not to target/ .
Consequently, with such a toolchain, imagemagick's configure detected libgomp as
supported and enabled its usage for the build stage, but then it failed to run
on the target because libgomp was missing. This is the bug #7322.

Disable OpenMP for imagemagick as a temporary workaround, until a better long
term solution is agreed on and implemented.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/gutenprint: replaces -static with -static-libtool-libs

gutenprint rely on the original behaviour of -static, but since commit
in buildroot "support/libtool: make -static behave like -all-static" [1],
the build of genppd is broken.

genppd need to be build statically otherwise the following warning appears:
***WARNING: Use of --disable-static-genppd or --disable-static
            when building CUPS is very dangerous.  The build may
            fail when building the PPD files, or may *SILENTLY*
            build incorrect PPD files or cause other problems.
            Please review the README and release notes carefully!

[1] http://git.buildroot.net/buildroot/commit/?id=97703978ac870ce2b14ad144f8e082de82aa2c64

Fixes:
http://autobuild.buildroot.net/results/55f/55f78104d7a5d11baf5650ac12aaa1b23c2b7743/build-end.log
http://autobuild.buildroot.net/results/fc8/fc8cfe3f27ceaca70c7471c44305317c66cb0eea/build-end.log

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

arch: remove no-longer default on atomics option

Now that all architectures explicitly select this option when it makes
sense, there is no need to have a default value.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

arch/xtensa: always has atomic ops

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

arch/x86: all x86 but i386 has atomics operations

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

arch/sparc: always has atomic ops

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

arch/sh: always has atomic ops

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

arch/powerpc: always has atomic ops

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

arch/nios2: always has atomic ops

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

arch/mips: always has atomic ops

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

arch/microblaze: always has atomic ops

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

arch/m68k: always has atomic ops

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

arch/bfin: always has atomic ops

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

arch/avr32: always has atomic ops

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

arch/arm: always has atomic ops

armv6 and above all have one sort of atomic ops or another. For armv5
and below, they are emulated, either as a kernel trap, a kernel VDSO,
or compiler intrinsics.

Aarch64 is just armv8, so make it a single commit. ;-)

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

msgpack: add dependency on atomic operations

This fixes:
http://autobuild.buildroot.net/results/44849a386cefb8899f4560296bfbbd8ea19ee910/

Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
[yann.morin.1998@free.fr: use the new symbol; remove comment strings]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libftdi: add dependency on atomic operations

This fixes:
http://autobuild.buildroot.net/results/6cb25ed954840109c9d0e582e922b0ba9d07e174/

Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
[yann.morin.1998@free.fr: use the new symbol; remove comment strings]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pulseaudio: add dependency on atomic operations

This fixes:
http://autobuild.buildroot.net/results/d463f3bf730a600a07ed6cd33695bf45e9fd3540/

Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
[yann.morin.1998@free.fr: use the new symbol; remove comment strings]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

cairo: add dependency on atomic operations

This fixes:
http://autobuild.buildroot.net/results/fadfaa9916724d310d0dda555a1db31bee1601d0/

Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
[yann.morin.1998@free.fr: use the new symbol; remove comment strings;
fix weston's comment]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

manual: document dependencies on atomic operations

Add atomic operations to the list of generic dependencies.

Since this is an architecture option, there is no comment string to be
added.

Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
[yann.morin.1998@free.fr: use the new arch-option; remove comment string]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain: drop the now-unused old BR2_TOOLCHAIN_HAS_ATOMIC_INTRINSICS

It's now been replaced with BR2_ARCH_HAS_ATOMICS, annd all packages have
been changed to use that instead.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/thrift: use the new ARCH_HAS_ATOMICS as dependency

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/jack2: use the new ARCH_HAS_ATOMICS as dependency

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/libtorrent: use the new ARCH_HAS_ATOMICS as dependency

And propagate to the reverse dependencies of libtorrent

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/icu: use the new ARCH_HAS_ATOMICS as dependency

And propagate to the reverse dependencies of icu.
Also, fix beecrypt's comment: only the C++ support needs atomics.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

arch: add an option to specify if the arch has atomic ops

The fact that atomic operations are available is not really a
specificity of the toolchain, but rather of the architecture.

So, add a new option that architectures that have atomic operations
can select. This in turn selects the current toolchain atomic option,
until all packages have been converted, at which point the old
toolchain option can be removed.

Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/manual: update documentation about gettext handling

This commit updates the Buildroot manual regarding how gettext related
issues are handled, now that we have cases where the gettext package
should be selected even with glibc toolchains.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ecryptfs-utils: select gettext, needed for command line utilities

The ecryptfs-utils package requires the 'gettext' program, which is
provided by the gettext package, to get translated strings. This is
needed regardless of whether the toolchain uses glibc or uClibc.

This issue was reported by 'ausjke' on IRC.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gettext: allow building when BR2_NEEDS_GETTEXT is not selected

Until now, we thought that gettext was only needed for the target for
uClibc toolchains, to provide the gettext functions that are normally
provided directly by glibc.

However, the gettext runtime actually does more than providing the
equivalent of those C library functions: it also provides certain
command line tools, like 'gettext' to get translated strings from the
shell. This tool is for example used by certain ecryptfs-utils scripts
to get translated strings. It is therefore necessary to be able to
build the gettext package even for glibc toolchains.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Update for 2014.08-rc2

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/news.html: add 2014.08-rc1 announcement link

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/xbmc-pvr-addons: Bump version

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/xbmc: Bump version to 13.2

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mpd: Add missing config option for plugin MAD

Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mpd: Set enable/disable config option for all plugins

Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mpd: Fix config option for plugin FLAC

Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mpd: Fix config option for plugin FAAD2

Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

postgresql: remove devfiles from target

Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

manual/getting started: rework 'Using Buildroot' section

This patch does some general rewording of the 'Using buildroot' section
of the manual.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

manual/getting started: rework 'Getting Buildroot' section

This patch reworks the 'Getting Buildroot' section of the manual as follows:
- be more specific on the Buildroot release cycle
- refer to the download page of the website for details on snapshots and
git, instead of duplicating the information.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

website/download: update daily snapshot section

This patch makes some minor changes to the download page of the website:
- don't capitalize Daily Snapshots as there is no reason to.
- remove extra link to daily snapshots, as this link is already available on
the line below.
- add a link to the latest snapshot
- avoid 'Click here', especially if 'here' is not clickable

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

manual/getting started: rework 'System requirements' section

This patch reworks the requirements section of the manual as follows:
- some general rewording
- move configuration editor dependencies above the download tools, as this
is the first thing people come in contact with.
- move sentence regarding -dev packages to configuration editor dependencies
and restrict to 'libraries'.
- clarify the download tools part.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

manual/getting started: rework 'Community resources' section

This patch reworks the section 'Community resources' as follows:
- use a labeled list instead of subsections, as the content of each section
  is so small that it does not deserve a real section.
  Related to this, the anchors for each of these subsections are removed, as
  referencing such anchors that do not correspond to a section boundary are
  not displayed nicely.
- move the part about applying patches from patchwork to the Contributing
  section in the Developer Guide
- reword some parts of the text
- add link texts to some links, instead of showing the URL directly, to make
  the HTML / PDF display nicer.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

manual/getting started: rename and move 'Getting involved' section

The Getting Involved section is actually an overview of the ways to interact
with the Buildroot community, which is useful for developers _and_ users.
Therefore, this patch moves the section from the Developer Guide to the
Getting Started section, and renames it to 'Community Resources'.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

manual: remove 'Events' section

The list of buildroot events is outdated, a sign that the manual is not the
best place to refer to timely things like events. The wiki page is better
suited for such information.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

manual: high-level restructuring

The structure of the buildroot manual is not always clear. There is a large
number of chapters, and some chapters seem to overlap. The distinction
between general usage and developer information is not always clear.

This patch restructures the manual into four large parts:
- getting started
- user guide
- developer guide
- appendix

Except for the names of these parts, the section names are not yet changed.
Content-wise there are no changes yet either. This will be handled in
subsequent patches.

In order to achieve the introduction of a new level 'parts' above
'chapters', the section indicators (=, ==, ===, ...) of several sections
have to be moved one level down. Additionally, the leveloffset indication to
asciidoc has to be removed. Finally, to maintain more or less the same level
of detail in the table of contents, the toc.section.depth attribute is
reduced as well. Note that for some sections, less detail is visible now.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

dependencies: Reject gcj in BR2_NEEDS_HOST_JAVA check

Xbmc uses the Groovy java package to generate API code, for details see
http://wiki.xbmc.org/index.php?title=Codegeneration#How_it_works

Groovy itself is broken when used with gcj:
http://jira.codehaus.org/browse/GROOVY-3701

Xbmc recommends to use another java package instead, like openjdk:
http://forum.xbmc.org/showthread.php?tid=199742

Until we come up with a host package to provide a java setup and
in order to make autobuilder happy let´s reject gcj when we check
for a java installation on the host.

Currently Xbmc is the only package using BR2_NEEDS_HOST_JAVA
so changing the behaviour of dependencies.sh has no side effects.

Fixes
http://autobuild.buildroot.net/results/213/213d7454a1dc68cfb8f4c8d9508f52ebf8e58e33/
http://autobuild.buildroot.net/results/639/639cda872cf36c122cbd6139dd76f6b51ac1864e/
http://autobuild.buildroot.net/results/c9e/c9eb12c95b2939c64590692a82af8d84bbd90956/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nut: fix parallel install

Fixes:
http://autobuild.buildroot.net/results/256/2567e13cd5bc702bc3a38a1d6fc8e34022cc7db5/

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/oprofile: fix configure test with gcc 4.9.x

Backport the upstream patch that fix a configure test breaked with gcc 4.9.x.

This patch must be removed with the next version bump.

Fixes:
http://autobuild.buildroot.net/results/f80/f8083f038d0efb7b5becf7810b6fcaf440fb8294/build-end.log

Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

CHANGES: update with recent changes

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gcc/4.9: fix C++ exceptions and pthread_exit()

Following the introduction of the support for the musl C library, the
support of C++ exceptions or features like pthread_exit() got broken
even with other libraries such as glibc. This was reported as bug #7028.

The problem was caused by the gcc patch needed to add support for
musl, which modified the libgcc/unwind-dw2-fde-dip.c logic to decide
whether USE_PT_GNU_EH_FRAME should be enabled or not. It completely
removed the existing logic, replacing it by a single logic based on
the definition of TARGET_DL_ITERATE_PHDR. However, this constant gets
defined by the configure script only for Solaris, or Linux Musl
platforms. For glibc/uClibc, the configure script does not define it,
and therefore USE_PT_GNU_EH_FRAME is not defined, causing issues with
exception handling.

This patch fixes that by restoring all the logic of
libgcc/unwind-dw2-fde-dip.c, and just adding the musl logic as one
more case.

It has been successfully runtime tested using the two code examples
provided in bug #7208, with uClibc, musl and glibc.

Cc: Krzysztof Wrzalik <kwrzalik@gmail.com>
Cc: David Bachelart <david.bachelart@bbright.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gcc/4.8: fix C++ exceptions and pthread_exit()

Following the introduction of the support for the musl C library, the
support of C++ exceptions or features like pthread_exit() got broken
even with other libraries such as glibc. This was reported as bug #7028.

The problem was caused by the gcc patch needed to add support for
musl, which modified the libgcc/unwind-dw2-fde-dip.c logic to decide
whether USE_PT_GNU_EH_FRAME should be enabled or not. It completely
removed the existing logic, replacing it by a single logic based on
the definition of TARGET_DL_ITERATE_PHDR. However, this constant gets
defined by the configure script only for Solaris, or Linux Musl
platforms. For glibc/uClibc, the configure script does not define it,
and therefore USE_PT_GNU_EH_FRAME is not defined, causing issues with
exception handling.

This patch fixes that by restoring all the logic of
libgcc/unwind-dw2-fde-dip.c, and just adding the musl logic as one
more case.

It has been successfully runtime tested using the two code examples
provided in bug #7208, with uClibc, musl and glibc.

Cc: Krzysztof Wrzalik <kwrzalik@gmail.com>
Cc: David Bachelart <david.bachelart@bbright.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gcc/4.7: fix C++ exceptions and pthread_exit()

Following the introduction of the support for the musl C library, the
support of C++ exceptions or features like pthread_exit() got broken
even with other libraries such as glibc. This was reported as bug #7028.

The problem was caused by the gcc patch needed to add support for
musl, which modified the libgcc/unwind-dw2-fde-dip.c logic to decide
whether USE_PT_GNU_EH_FRAME should be enabled or not. It completely
removed the existing logic, replacing it by a single logic based on
the definition of TARGET_DL_ITERATE_PHDR. However, this constant gets
defined by the configure script only for Solaris, or Linux Musl
platforms. For glibc/uClibc, the configure script does not define it,
and therefore USE_PT_GNU_EH_FRAME is not defined, causing issues with
exception handling.

This patch fixes that by restoring all the logic of
libgcc/unwind-dw2-fde-dip.c, and just adding the musl logic as one
more case.

It has been successfully runtime tested using the two code examples
provided in bug #7208, with uClibc, musl and glibc.

Cc: Krzysztof Wrzalik <kwrzalik@gmail.com>
Cc: David Bachelart <david.bachelart@bbright.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gcc/arc-4.8-R3: add patch to enable more C++ features with uClibc

This commit fixes bug #7250, by allowing more libstdc++ features to be
enabled with uClibc. libstdc++ wants an absolutely complete C99
support in the C library before enabling *any* feature that needs some
C99 functions. However, uClibc doesn't provide C99 complex numbers, so
libstdc++ disables a lot of C++ standard methods, even though they are
not related to C99 complex numbers.

A partial solution already existed in the patch
302-c99-snprintf.patch, but this commit replaces it by the more
complete 850-libstdcxx-uclibc-c99.patch, which is highly inspired by
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58393, except that it
doesn't rely on configure.ac checks, but simply on testing
defined(__UCLIBC__) like was done in 302-c99-snprintf.patch. This
allows to avoid having to autoreconf gcc, which is quite complicated
to achieve.

Reported-by: Richard <tarka.t.otter@gmail.com>
Cc: Richard <tarka.t.otter@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gcc/4.9: add patch to enable more C++ features with uClibc

This commit fixes bug #7250, by allowing more libstdc++ features to be
enabled with uClibc. libstdc++ wants an absolutely complete C99
support in the C library before enabling *any* feature that needs some
C99 functions. However, uClibc doesn't provide C99 complex numbers, so
libstdc++ disables a lot of C++ standard methods, even though they are
not related to C99 complex numbers.

A partial solution already existed in the patch
302-c99-snprintf.patch, but this commit replaces it by the more
complete 850-libstdcxx-uclibc-c99.patch, which is highly inspired by
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58393, except that it
doesn't rely on configure.ac checks, but simply on testing
defined(__UCLIBC__) like was done in 302-c99-snprintf.patch. This
allows to avoid having to autoreconf gcc, which is quite complicated
to achieve.

Reported-by: Richard <tarka.t.otter@gmail.com>
Cc: Richard <tarka.t.otter@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gcc/4.8: add patch to enable more C++ features with uClibc

This commit fixes bug #7250, by allowing more libstdc++ features to be
enabled with uClibc. libstdc++ wants an absolutely complete C99
support in the C library before enabling *any* feature that needs some
C99 functions. However, uClibc doesn't provide C99 complex numbers, so
libstdc++ disables a lot of C++ standard methods, even though they are
not related to C99 complex numbers.

A partial solution already existed in the patch
302-c99-snprintf.patch, but this commit replaces it by the more
complete 850-libstdcxx-uclibc-c99.patch, which is highly inspired by
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58393, except that it
doesn't rely on configure.ac checks, but simply on testing
defined(__UCLIBC__) like was done in 302-c99-snprintf.patch. This
allows to avoid having to autoreconf gcc, which is quite complicated
to achieve.

Reported-by: Richard <tarka.t.otter@gmail.com>
Cc: Richard <tarka.t.otter@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gcc/4.7: add patch to enable more C++ features with uClibc

This commit fixes bug #7250, by allowing more libstdc++ features to be
enabled with uClibc. libstdc++ wants an absolutely complete C99
support in the C library before enabling *any* feature that needs some
C99 functions. However, uClibc doesn't provide C99 complex numbers, so
libstdc++ disables a lot of C++ standard methods, even though they are
not related to C99 complex numbers.

A partial solution already existed in the patch
302-c99-snprintf.patch, but this commit replaces it by the more
complete 850-libstdcxx-uclibc-c99.patch, which is highly inspired by
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58393, except that it
doesn't rely on configure.ac checks, but simply on testing
defined(__UCLIBC__) like was done in 302-c99-snprintf.patch. This
allows to avoid having to autoreconf gcc, which is quite complicated
to achieve.

Reported-by: Richard <tarka.t.otter@gmail.com>
Cc: Richard <tarka.t.otter@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

configs/{atngw100, atstk100x}: fix build of AVR32 defconfigs

Since we marked the AVR32 architecture deprecated, it can no longer be
selected in a normal configuration. This has caused the AVR32
defconfigs to fail to build in our daily Jenkins tests. In order to
make them build again, they must use BR2_DEPRECATED=y. Of course, when
we remove AVR32 completely, we'll remove those defconfigs as well.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libnftnl: add patch to avoid symbol conflict

When ELF binaries and shared libraries are used, the internal
functions of libnftnl such as xfree() are not visible to the outside
world (their visibility is 'hidden'). Therefore, the fact that other
programs (especially nftables) may have symbols with the same name
does not cause any problem.

However, when doing static linking on a non-ELF platform (such as
Blackfin, which uses the FLAT binary format), there is no way of
encoding this visibility. Therefore, the xfree() symbols of libnftnl
becomes visible to the outside world, causing a conflict with the
xfree() symbol defined by nftables.

To solve this, this patch renames the libnftnl xfree() function to
libnftnl_xfree().

This commit fixes a problem seen after building nftables statically on
Blackfin. This problem was seen after the previous patch fixing the
autobuilder failure:

http://autobuild.buildroot.org/results/98b/98b707ffdeeb1cda94b7c1019ef29cf5fd7db8bf/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

nftables: fix build in static scenarios

When linking against readline, it forgets to link against ncurses,
which is needed by readline. Fix this by passing LIBS="-lcurses" to
the configure script.

Fixes:

http://autobuild.buildroot.org/results/98b/98b707ffdeeb1cda94b7c1019ef29cf5fd7db8bf/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/empty: Respect LDFLAGS, fix link order

Fixes
http://autobuild.buildroot.net/results/50f/50fedb54cf005d1177d85c5a34fd10a1c354ba5b/
http://autobuild.buildroot.net/results/9fc/9fce0825772e99de3c6808b729641147385413aa/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

qmx6/wandboard_defconfig: switch to custom kernel headers version

Since 3.0.x was EOL and deprecated this would cause it to use newer
headers than the kernel and cause issues.
So switch to custom kernel headers version string to fix this.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: mark EOL versions deprecated

Follow the upstream EOL cycle and mark 3.0, 3.11, 3.13 and 3.15
as deprecated for 2014.08.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

manual-text: hide image representations

Images specified in the asciidoc sources (currently only the logo) are
displayed as the file name in the text version of the manual. This causes an
odd line to appear:
logo.png

Avoid this by setting the image representation macros to {empty} in
manual-text.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

manual-text: make sure URLs are displayed if a link text was provided

When the asciidoc source contain URLs of the form:
    http://example.com[An example website]
the text representation of the manual would only contain:
    An example website
without displaying the actual URL.

This patch adds an asciidoc configuration file that sets the inline macros
for several URL types so that the display becomes:
    An example website [http://example.com]
For URLs where no link text was provided, the display becomes:
    http://example.com
which is the same as before.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gendoc infra: add support for asciidoc configuration files

This patch introduces support for asciidoc configuration files, specific for
each output format (html, text, pdf, ...). This is useful to make certain
tweaks in the document generation.

If a file docs/manual/asciidoc-<format>.conf is present, it is passed to
asciidoc as configuration file. If no file for the current format is
present, the options passed to asciidoc are empty.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gendoc infra: use $(pkgname) instead of explicitly passing 'manual'

In the gendoc infrastructure, using an assignment of the form
FOO = docs/$(1)/bar
inside GENDOC_INNER does not work as expected: the $(1) value is empty here
and the value of FOO becomes 'docs//bar'.

Parameters $(2), $(3), etc. do not have this problem. The specific thing
about $(1) is that it is a parameter to GENDOC itself (indicating the
document to create) and passed transparently to GENDOC_INNER.

This is different from the package infrastructures, where $(1) is set from
$(pkgname). In fact, the same strategy could be used by the gendoc
infrastructure as well, as $(pkgname) resolves to 'manual' for file
docs/manual/manual.mk. This has the advantage that the described problem
does not occur.

Note that this means that if we want to use the same GENDOC infrastructure
for another document, it will have to reside in a separate directory than
the manual.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Makefile: unconditionally include pkg-utils.mk

Currently, pkg-utils.mk (included via package/Makefile.in) is only included
when a configuration file already exists. This means that none of the
utilities it defines are available without .config.

In particular:
- the MESSAGE macro, causing pretty build output. Since some make targets
  can be run even without .config, like 'make manual', not having this
  pretty printing is odd.

- pkgname, pkgdir: in a subsequent patch, these functions will be used for
  the generation of the manual, and since this should work also without
  .config, we need these functions to be available.

This patch moves the include of pkg-utils.mk from package/Makefile.in to
Makefile, outside of the check for .config.

This is a quick fix. The full solution involves to minimize the amount of
Makefile code that is guarded by a check on .config. This approach will be
taken in the 2014.11 release cycle.

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

perl-net-ssleay: fix build

the new option OPTIMIZE needs the same replacement.

see http://autobuild.buildroot.net/results/278f9d121273a16cedc009c0b8df0a8659d8fb73/

Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/iftop: fix static build

Use pcap-config to list optional libpcap dependencies that we need to list
when building statically.

Inspired by Baruch Siach
http://git.buildroot.net/buildroot/commit/package/dhcpdump/dhcpdump.mk?id=429f4415cd153c6809394a8b3245d4d15bba3ec3

Fixes
http://autobuild.buildroot.net/results/c7e/c7e3b2897a9cb9ab55dc7b1a2cd1961235d2d1a4/
http://autobuild.buildroot.net/results/60f/60f82bedae255f6b69c9a5ac22686c76c6276301/
http://autobuild.buildroot.net/results/1b7/1b771af04a95a78144141a5d555c97bbb5a7e13f/
http://autobuild.buildroot.net/results/1f4/1f45e2adcc80c4a209aa5895260985460933575c/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/ngrep: fix static build

Use pcap-config to list optional libpcap dependencies that we need to list
when building statically.

Inspired by Baruch Siach
http://git.buildroot.net/buildroot/commit/package/dhcpdump/dhcpdump.mk?id=429f4415cd153c6809394a8b3245d4d15bba3ec3

Fixes
http://autobuild.buildroot.net/results/3c5/3c584b850cabebcf93dfd61c59e28988165a41c4/
http://autobuild.buildroot.net/results/938/93842b54767cca51c68ad33ddc93ec58d70602c8/
http://autobuild.buildroot.net/results/0ae/0ae4adec7fe66f819c7b3dabf13648fb29247de6/
http://autobuild.buildroot.net/results/9c2/9c203bc6ca91da68c9e7335611c1fb56224380bc/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

xapp_rstart: Depends on MMU

Fixes
CCLD rstartd.real
auth.o: In function `_do_auth':
auth.c:(.text+0x6a): undefined reference to `_fork'
server.o: In function `_detach':
server.c:(.text+0x80a): undefined reference to `_fork'

To reproduce use this defconfig
http://autobuild.buildroot.net/results/8d5/8d5ad404fab7ec2a501972ba9c08b0109e420b80/defconfig

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/matchbox: Depends on MMU

Fixes matchbox-panel:
http://autobuild.buildroot.net/results/8d5/8d5ad404fab7ec2a501972ba9c08b0109e420b80/

and matchbox-desktop:
mbdesktop_win_plugin.o: In function `mbdesktop_win_plugin_load':
/home/br/br/output/build/matchbox-desktop-0.9.1/src/mbdesktop_win_plugin.c:22: undefined reference to `_fork'

and matchbox-wm:
matchbox-remote.o: In function `mbcommand':
/home/fli4l/br3/output/build/matchbox-wm-1.2/src/matchbox-remote.c:147: undefined reference to `_fork'

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/webkit: select cairo, since we select one of its options

When selecting an option of a package, that package must also be
selected, otherwise the package is not built.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/infozip: Rename HOST_CC to HOSTCC

Wrong variable name is used which can lead to build errors for the host variant:

[...] -I. -DUNIX" AS=" -c" -f unix/Makefile generic

c _match.s
make[1]: c: command not found

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

systemd: disable link time optimization

As reported in https://bugs.busybox.net/show_bug.cgi?id=7286,
systemd fails to build with BR2_OPTIMIZE_2=y. This mode activates the GCC
options -flto and -ffat-lto-objects, which do not mix well with the GCC
tricks used in src/compat-libs/linkwarning.h to build the compatibility
libraries.

As a temporary workaround, this patch disables link time optimization for
systemd.

Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gnupg2: Needs a suitable iconv implementation

gnupg2 needs a toolchain with locale support or a package which provides
a suitable iconv implementation (libiconv). Otherwise it will fail at
the configure phase with an error like this one:

*** It is now required to build with support for iconv
*** Please install a suitable iconv implementation.

Fixes:
http://autobuild.buildroot.net/results/8c9/8c93c28533dfebffa8b2e34b1421d3fa3cdeb278/

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Markos Chandras <Markos.Chandras@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

subversion: security bump to version 1.7.18

Fixes:

CVE-2014-0032 - mod_dav_svn is vunerable to a remotely triggerable
segfault DoS vulnerability when SVNListParentPath is on.

CVE-2014-3522 - Serf RA layer does not correctly validate certificates
with wildcards in them for HTTPS.

CVE-2014-3528 - Credentials cached with Subversion may be sent to the
wrong server.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

gd: add patch for CVE-2014-2497

Fixes CVE-2014-2497 - NULL pointer dereference
Patch from upstream:
https://bitbucket.org/libgd/gd-libgd/commits/463c3bd09bfe8e924e19acad7a2a6af16953a704

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/localedef: don't use config.site when cross-compiling

On fedora 20 64bits host, the file /usr/share/config.site contains
a fix for installing libraries into /lib/lib64 on 64bits systems
that redefine libdir in the generated Makefile.

This causes the bug 7262 reported Normen Bolling.

Set CONFIG_SITE to "no" to not use config.site

fixes: https://bugs.busybox.net/show_bug.cgi?id=7262

Reported-by: Normen Bolling <normen.bolling@teufel.de>
Cc: Normen Bolling <normen.bolling@teufel.de>
Cc: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/tar: Depends on MMU

Fixes
misc.o: In function `_xfork':
misc.c:(.text+0x614): undefined reference to `_fork'
../lib/libtar.a(rtapelib.o): In function `_rmt_open__':
rtapelib.c:(.text+0x6d2): undefined reference to `_fork'

To reproduce use this defconfig
http://autobuild.buildroot.net/results/8d5/8d5ad404fab7ec2a501972ba9c08b0109e420b80/defconfig

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gst1-plugins-good: v4l2 plugin needs kernel headers 3.0+

Fixes http://autobuild.buildroot.net/results/284/284313e660c3c9fad891fd71aa56ca5751946dc6/

For the multi planar api (mp_pix). It was actually added in 2.6.39 (commit
f8f3914cf9), but we only have symbols for 3.x kernels, so use 3.0 instead.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

qt: don't install translation files by default

Commit 93917b6980f7f2b51302e1a3fa451b07cf7d674e (2013.11) introduced
the installation of the binary .qm translation files, unconditionally.

However, the installed size is very large for some embedded systems
(about 8 MB), and they are not needed in many cases.

In order to avoid such a waste of storage space, commit
2ff329412f490dc916bab3377073ef5950a46298 (2014.08) made this
installation an option that could be disabled. For backward
compatibility, the option default was set to yes.

Given the size of these files, and that they had never been installed
by Buildroot versions before 2013.11, change the default to not
installing them.

Interested users can still activate it as needed.

Also update and improve the help text.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Danomi Manchego <danomimanchego123@gmail.com>
Cc: Danomi Manchego <danomimanchego123@gmail.com>
Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libcuefile: fix static linking

Add a patch to libcuefile to fix BR2_PREFER_STATIC_LIB=y configurations.

Fixes:

http://autobuild.buildroot.org/results/13e/13ecdab5bb132532674a51e0e0e1136d417dfcd9/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libebml: properly support static only builds

This commit adjusts the libebml package to not build a shared library
when BR2_PREFER_STATIC_LIB=y.

Fixes:

http://autobuild.buildroot.org/results/262/26279f72b6c5708f363b3cce2102afa0eccc3a72/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

bandwidthd: incorporate fixes for autobuilders

"The build failures of bandwidthd observed in the autobuilders in
relation to libpng are caused by the usage of -L/usr/lib
-L/usr/local/lib in the compiler flags, which leads the configure
script to try to link against a host libpng library."

These issues are fixed by:

* Version bump to -r08
"[patched] the configure.ac script to remove the hardcoded
-L/usr/local/lib and -I/usr/local/include. The bandwidthd package
-was already autoreconfigured, so there is no need to add it."

* "Adding the --without-x option, which ensures that the configure.ac
script will not add -L/usr/lib to the compiler flags (and we anyway
haven't added any sort of X.org support to bandwidthd for the
moment)."
Both fixes by Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/ffmpeg: prevent stripping the ffmpeg binary

Packages shouldn't strip executables by themselves, so that Buildroot
controls whether stripping should occur or not. This also fixes the
build on Blackfin FLAT where stripping actually doesn't work because
stripping FLAT binaries is not supported.

Inspired by Thomas:
http://git.buildroot.net/buildroot/commit/package/hdparm/hdparm.mk?id=11dbb615338cd768acc2c3138064ddf557e9b60b

Fixes
http://autobuild.buildroot.net/results/581/581c43b50c9717e53334eb156ece95fe499ccb04/
http://autobuild.buildroot.net/results/57a/57a1bdc22b803114c018fa007884385bf8355151/
http://autobuild.buildroot.net/results/d8a/d8a1aadebd302abc923bc4865e1242ab2479d641/

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>