wpa_supplicant: add option to enable syslog support

Add an option to enable support for sending debug messages
to syslog instead of stdout.

Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libmbim: bump to 1.6.0

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ulogd: link conditionally to libpthread

libpthread is only needed for the database backends so don't link
against it if it's not available.

Fixes:
http://autobuild.buildroot.net/results/527/527d9d4f42af0ffc110e4f52701df279f466a89a/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ktap: new package

Add ktap, a script-based dynamic tracing tool.

Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

samba: security bump to version 3.6.22

Fixes CVE-2013-4408 and CVE-2012-6150.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dnsmasq: bump to version 2.68

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

thrift: disable TQTcpServer

Disable TQTcpServer, it doesn't build properly. Fixes:
http://autobuild.buildroot.net/results/ef8/ef8afd0fea786f076a4bbece2fcbefdf5cb32ddd/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

imagemagick: drop IMAGEMAGICK_MAJOR variable

It is only expanded once just below, so we might as well drop it.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

imagemagick: bump to version 6.8.7-9

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

numactl: bump to version 2.0.9

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gpsd: backport upstream patches pending 3.11 release

The 3.11 release of gpsd is imminent; in the meantime, backport some patches
from upstream to fix some of the autobuild failures.

Also bump to the most recent Git snapshot.

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump to version_3.12.4

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libglib2: bump version to 2.38.2

libglib2 can fail to build for arm, with the following error.

  gatomic.c:668:2: error: #error G_ATOMIC_LOCK_FREE defined, but incapable of lock-free atomics.

The following upstream commit fixes the problem.

  commit 996edb0c46356d8a326f886b91a77a6af9a2de3e
  Author: Antoine Jacoutot <antoine@mtier.org>
  Date:   Wed Aug 28 09:35:27 2013 +0200

    fix atomic ops detection

    AC_TRY_LINK should be used instead of AC_TRY_COMPILE because the code
    will compile everywhere, either producing ``atomic'' code, or an
    external reference to __sync_bool_compare_and_swap.

    https://bugzilla.gnome.org/show_bug.cgi?id=706958

The upstream commit went into version 2.37.7, so this is the lowest version
that we can bump to, in order to fix the atomic operations problem. However,
2.37.x is a development version, so we bump to 2.38.2 instead.

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

manual: systemd does not require glib

Signed-off-by: Shawn Landden <shawn@churchofgit.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

util-linux: add nsenter option

[Peter: adjust white space and commit message]
Signed-off-by: Shawn Landden <shawn@churchofgit.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

poppler: bump to version 0.24.4

Upgrade to latest stable release.

Release 0.24.4
        core:
         * Fix regression in broken endstream detection. Bug #70854
         * Catalog: sort entries of NameTrees to make sure lookup works. Bug #26049
         * Don't infinite loop if reading from GooFile::read fails. Bug #71835

        utils:
         * pdftotext: Do not close stdout. Bug #71639
         * pdftotext: Silence warning for may be used uninitialized variable. Bug #71640
         * pdftotext: Escape the text of the xml headers
         * Warn the user if he provides a wrong range

        qt4:
         * Fix typo in xml API. Bug #71643

        qt5:
         * Fix typo in xml API. Bug #71643

Release 0.24.3
        core:
         * PSOutputDev: Fix PFB font embedding. Bug #69717
         * CairoOutputDev: Do not set an invalid matrix in drawImage(). Bug #70085

        qt4:
         * Don't crash if getXRef()->copy() fails

        qt5:
         * Don't crash if getXRef()->copy() fails

        utils:
         * pdfseparate: Allow only one %d in the filename. Bug #69434

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

snappy: bump to version 1.1.1

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

mention nconfig

Signed-off-by: Shawn Landden <shawn@churchofgit.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dialog: remove useless POST_CLEAN command

For some reason, the dialog package has a DIALOG_POST_CLEAN variable,
which doesn't match any of the variables understood by the
infrastructure. This commit gets rid of it.

This was noticed while reviewing the packaging of python-dialog.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dialog: add missing comment when thread support is missing

This was noticed when reviewing the packaging for the python-dialog
package.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Config.in: Add a menu around BR2_EXTERNAL configuration options

To make it clear to the user that these options are external to Buildroot
and no support is provided by the Buildroot community.

With this, there's no need to recommend people to their options inside
a menu, so remove that from the documentation.

Kconfig nicely allows us to hide the menu completely if BR2_EXTERNAL isn't
used, so make use of that to not confuse people. It would be nice if we
could add some help text to explain the BR2_EXTERNAL stuff as well, but
that isn't supported on menus :/

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs/manual: add explanations about BR2_EXTERNAL

This commit updates the manual to add details on how to use the
BR2_EXTERNAL feature.

[Peter: minor tweaks, fix asciidoc tag as pointed out by Samuel]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Acked-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

core: allow external defconfigs to be used

This commit allows the user to store defconfigs in
$BR2_EXTERNAL/configs/. To achieve this:

 * It adds a new %_defconfig that looks in $BR2_EXTERNAL/configs/ for
   the corresponding defconfig file.

 * Updates the help target to also list external defconfigs.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Tested-by: "Samuel Martin" <s.martin49@gmail.com>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

core: allow external Config.in/makefile code to be integrated

This commit allows the BR2_EXTERNAL directory to contain Config.in and
Makefile code, which gets integrated into the Buildroot build logic:

 - Buildroot automatically includes the $BR2_EXTERNAL/Config.in in the
   top-level configuration menu.

 - Buildroot automatically includes the BR2_EXTERNAL/external.mk in
   the build logic, so it can for example be used to include other .mk
   files that define package recipes.

This is typically intended to be used to create target packages in the
BR2_EXTERNAL directory, but can also be used for bootloaders, host
packages, or other custom make logic.

We also add a dummy Config.in file in support/dummy-external/ to
ensure that the source "$BR2_EXTERNAL/Config.in" line will point to an
existing file even when BR2_EXTERNAL is not used by the user.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Tested-by: "Samuel Martin" <s.martin49@gmail.com>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

core: introduce the BR2_EXTERNAL variable

This commit introduces the BR2_EXTERNAL environment variable, which
will allow to keep Buildroot customization (board-specific
configuration files or root filesystem overlays, package Config.in and
makefiles, as well as defconfigs) outside of the Buildroot tree.

This commit only introduces the variable itself, and ensures that it
is available within Config.in options. This allows us to use
$BR2_EXTERNAL in a 'source' statement in Config.in.

Following patches extend the usage of BR2_EXTERNAL to other areas
(packages and defconfigs).

In details, this commit:

 * Introduces the BR2_EXTERNAL Kconfig option. This option has no
   prompt, and is therefore not visible to the user and also not
   stored in the .config file. It is automatically set to the value of
   the BR2_EXTERNAL environment variable. The only purpose of this
   BR2_EXTERNAL Kconfig option is to allow $BR2_EXTERNAL to be
   properly expanded when used inside Kconfig source statements.

 * Calculates the BR2_EXTERNAL value to use. If passed on the command
   line, then this value is taken in priority, and saved to a
   .br-external hidden file in the output directory. If not passed on
   the command line, then we read the .br-external file from the
   output directory. This allows the user to not pass the BR2_EXTERNAL
   value at each make invocation. If no BR2_EXTERNAL value is passed,
   we define it to support/dummy-external, so that the kconfig code
   finds an existing $(BR2_EXTERNAL)/package/Config.in file to
   include.

 * Passes the BR2_EXTERNAL into the *config environment, so that its
   value is found when parsing/evaluating Config.in files and .config
   values.

Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Tested-by: "Samuel Martin" <s.martin49@gmail.com>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

manual: fix manual generation in preparation for BR2_EXTERNAL support

This patch fixes an issue that occurs during the manual build process
which will occur when BR2_EXTERNAL is introduced.

During the package list generation, the python script using kconfiglib
module reads and parses the Config.in files. So, symbols, including
environment variables, got expanded and/or resolved.  In
kconfiglib.py, this patch fixes the regex that did not allow to use
numbers in the environment variable names, so '$BR2_EXTERNAL' got
wrongly expanded like it was '${BR}2_EXTERNAL':

<snip>
>>>   Updating the manual lists...
Traceback (most recent call last):
  File "/opt/buildroot/master/support/scripts/gen-manual-lists.py", line 375, in <module>
    buildroot = Buildroot()
  File "/opt/buildroot/master/support/scripts/gen-manual-lists.py", line 216, in __init__
    self.root_config))
  File "/opt/buildroot/master/support/scripts/kconfiglib.py", line 214, in __init__
    self.top_block = self._parse_file(filename, None, None, None)
  File "/opt/src/buildroot/master/support/scripts/kconfiglib.py", line 919, in _parse_file
    return self._parse_block(line_feeder, None, parent, deps, visible_if_deps, res)
  File "/opt/buildroot/master/support/scripts/kconfiglib.py", line 1114, in _parse_block
    self.base_dir))
IOError: /opt/buildroot/master/Config.in:490: sourced file "$BR2_EXTERNAL/Config.in" (expands to
"2_EXTERNAL/Config.in") not found. Perhaps base_dir
(argument to Config.__init__(), currently
"/opt/buildroot/master") is set to the wrong value.
docs/manual/manual.mk:2: recipe for target 'manual-update-lists' failed
make: *** [manual-update-lists] Error 1
</snip>

Reported-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package: unification of name <pkg>_VERSION_MINOR variable

Currently there are two different names of the minor version variable:
<PKG>_MINOR_VERSION and <PKG>_VERSION_MINOR
This patch unifies them to <PKG>_VERSION_MINOR

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package: unification of name <pkg>_VERSION_MAJOR variable

Currently there are two different names of the major version variable:
<PKG>_MAJOR_VERSION and <PKG>_VERSION_MAJOR
This patch unifies them to <PKG>_VERSION_MAJOR

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-dialog: add new package

[Peter: Propagate dialog dependencies, show comment if not available]
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

thirft: new package

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-thrift: bump to version 0.9.1 and switch to apache

Switch away from the PyPI subset version since it has a great filename
clash with the full upstream apache version.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-thrift: fix cross building

The C code (fastbinary.so) wasn't built using the cross compiler, hence
it was unusable. Fix it.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

boost: add host variant

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libevent: add host variant

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

packages: remove package clean commands

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

infra: remove package clean commands

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

manual: remove package clean commands

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libsoc: bump to 0.5

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 3.{4,10,12}.x stable versions

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

opus: fix configure issue with ARM optimization when /bin/sh isn't bash

Fixes http://autobuild.buildroot.net/results/136/1360fefb79ebc7d95ef3a7459be681ac11e1ffb4/

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linknx: bump to version 0.0.1.32

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

X.org: needs dynamic library support

xlib_libX11, one of the main libraries of X.org, uses dlfcn.h and dlopen.
To avoid having to add a dependency on !BR2_PREFER_STATIC_LIB on tons of
packages, we promote this dependency to X.org itself (similar to how thread
support is handled in X.org).

Fixes
http://autobuild.buildroot.net/results/a47/a47c5d96f880af04b85bb6773e87d04f9d7c2864/

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gdb: add host-texinfo dependency for Git versions

Just like for binutils, gdb versions pulled from Git want to
regenerate their documentation, and none of the MAKEINFO tricks we've
tried worked properly, so we're simply adding host-texinfo as a
dependency.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

binutils: add missing dependencies for Git versions

When the binutils source code is pulled from a Git repository, a
number of generated files are not present, and need to be
re-generated. Those files are generated by flex, bison, and texinfo,
so we need to pull the corresponding dependencies.

Notice that we tried avoiding the texinfo dependency by doing a number
of MAKEINFO tricks, but none of them worked properly, so we've instead
chosen to depend on host-texinfo.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

defconfigs: update microblaze defconfigs to use new toolchain

Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

toolchain: enable microblaze toolchain

This commit allows to build an internal toolchain for the Microblaze
architecture, with either glibc or eglibc.

Note that we add an explicit list of architectures that are supported
by uClibc, and Microblaze is not part of them, because it currently
doesn't build for this architecture.

[Thomas: add better commit log, add architecture dependencies on
uClibc, to avoid selecting uClibc on Microblaze]

Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gdb: add microblaze internal toolchain

Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

glibc: add microblaze internal toolchain

Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gcc: add microblaze internal toolchain

Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

binutils: add microblaze internal toolchain

Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Revert "arc: Add option for ARC-specific download site"

All packages use github now.

This reverts commit 1445b7fd2e46db5d39ad5e2f5cc262574399f5f3.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

uclibc: arc: Use git instead of website

Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gcc: arc: Download from github instead of Synopsys website

The github release mechanism only supports .tar.gz, hence the ugly
GCC_UNPACK variable.

Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

binutils: arc: Use git instead of website

Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gdb: arc: Use git instead of website

Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

packages: convert Github  users to the github helper

[Thomas: taken from Mischa original github patch.]

Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

docs: document the new github helper function

[Thomas: splitted from Mischa original commit]

Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

infra: introduce github helper function

In order to make it easier to cope with changes in github download-URL's,
this patch introduces the github helper function. It generates the site
URL of a github repository. It's usage is $(call github,user,pkg,version).

[Thomas: extracted from Mischa original commit, macro moved to
pkg-download.mk]

Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pandaboard: fix defconf build with recent kernels

The patch "pandaboard: Fix defconfig build" locked the
default pandaboard kernel to 3.8.11. This is inconvenient,
since the boot process has changed since kernel > 3.8.

Update the default kernel to 3.12.2 and fix the boot image
configuration, but remain compatible with legacy U-Boot
versions by using appended flattened device tree uImage.

This change *should* keep future kernels compatible with a
fixed U-Boot version.

Note the default device tree is now for the pandaboard-ES,
so users of other board revisions will need to set the
correct DTS_NAME.

[Peter: use custom kernel headers version (3.12.2)]
Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

board/raspberrypi: bump to use Linux 3.10

The new 'stable' branch of the Raspberry Pi kernel is now based
on the Linux 3.10 branch (currently 3.10.22), so bump both the
kernel version for the toolchain headers, and for the target.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package: change tarball compression to xz

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

manual: do not generate .pyc files

Python saves a pre-compiled support/scripts/kconfiglib.pyc file
side-to-side with the corresponding .py file.

This does not work if the Buildroot source tree is read-only (but
this is not an error for Python, which keep going OK).

But this may cause issues for out-of-tree builds in case the same
Buildroot source tree is shared by many builds.

Also, 'make clean' currently does not clean this file, and out-of-tree
builds can remove it either, at the risk of causing issues for other
out-of-tree builds running at the same time.

Just tell Python not to generate .pyc files:
  - call the script via python, don't use the sha-bang
  - thus, make the script non-executable, and remove the sha-bang

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

barebox: bump to version 2013.12.0

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

git: bump to version 1.8.5.1

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

bison: bump to version 3.0.2

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

freetype: fix host headers as well

Like on 0a9cedbcf49641b2569e0a137818ad9f8c539edd we also need to fix the
headers for the host variant.
Fixes:
http://autobuild.buildroot.net/results/261/261d6a59f144e44e51b38de98a7355a9eb8ac791/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

glibc: Backport upstream patch to accept make-4.0 or newer

Upstream patch (28d708c44bc47b56f6551ff285f78edcf61c208a) added support for
make-4.0 or newer. We backport this patch to allow glibc to build on hosts
running the latest version of 'make'.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ModemManager: add new package

[Peter: fixup license info as pointed out by Thomas]
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libmbim: add new package

[Peter: fixup license info as pointed out by Thomas]
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

libqmi: bump to 1.6.0

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

packages: remove uninstall commands

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

infra: remove uninstall commands

Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

manual: remove references to uninstall commands

[Peter: keep clean comment as pointed out by Arnout]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

freetype: fix staging headers

freetype 2.5.1 moved headers from /usr/include/freetype2/freetype to
/usr/include/freetype2.
Some packages use a non-recommended header inclusion of <freetype/x.h>
instead of using the recommended ft2build.h method, so until it's fixed
across the board upstream for packages that break do a symlink.

See:
http://git.savannah.gnu.org/cgit/freetype/freetype2.git/commit/?id=fae382076409db198dfbff36ac4cbb97b05b30a1

Fixes:
http://autobuild.buildroot.net/results/64c/64cc8467eeb44f741aeb42bf1a0c77edbfbd285f/
http://autobuild.buildroot.net/results/708/708fa7423c83e22a51854f1abca0f3358506a318/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

opus-tools: bump version, add license info

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

opus: bump version, add license info

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

log4cplus: new package

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gpsd: update ubx option for version 3.10

For gpsd 3.10, the ubx scons option has been renamed to ublox. Update our
makefile accordingly.

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gpsd: switch to Git snapshot

Since the gpsd version bump from 3.9 to 3.10, gpsd has been generating a lot
of autobuild failures. See, for example, the following.

  http://autobuild.buildroot.net/results/c8f/c8f2eed70cfbdcb7e7af820977aa531b59f0575a/

A 3.11 release is expected shortly; in the interim, switch to a recent Git
snapshot in which the most serious build problems appear to have been fixed.

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/openssl: fix coding style

Currently, openssl defines three conditional hooks, but two do not
follow our coding rules:
  - for PRE_CONFIGURE, the hook is defined in the if-block, but
    the _HOOK variable is always set
  - for POST_INSTALL_TARGET, the hook is always defined, but the
    _HOOK variable is set in the if-block

Fix that:
  - define the hook in the if-block
  - assign the _HOOK variable in the if-block

At the same time, get rid of extra empty lines that make it more
difficult to read.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pkg-config: remove deprecated

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux: bump to version 3.12.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 3. {4, 10, 12}.x stable versions

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

fontconfig: bump to version 2.11.0

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

freetype: bump to version 2.5.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

olsr: bump to version 0.6.6.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

radvd: bump to version 1.9.7

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

udev: disable on avr32

udev requires the epoll_create1 system call, which is not available on avr32.

Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lftp: new package

LFTP is a sophisticated ftp/http client, and a file transfer program
supporting a number of network protocols. Like BASH, it has job
control and uses the readline library for input. It has bookmarks,
a built-in mirror command, and can transfer several files in parallel.
It was designed with reliability in mind.

Signed-off-by: Arnaud Rébillout <rebillout@syscom.ch>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

binutils: add version 2.24

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-pyparsing: rename package's Config.in bool

Also remove unnecessary tab/spaces on blank line.

Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-pygame: rename package's Config.in bool

Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

grub: force -m32 so we build grub 32 bits on 64 bits architecture

As reported by Matthew Weber, Grub doesn't build on 64 bits build
machines, because the host compiler produces 64 bits binaries by
default, while Grub should be built 32 bits. Therefore, this commit
passes -m32 to the Grub CFLAGS, so that 32 bits binaries are always
produced.

Reported-by: Matthew Weber <mlweber1@rockwellcollins.com>
Cc: Matthew Weber <mlweber1@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Matthew Weber <mlweber1@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

squid: bump to version 3.3.11

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

sqlite: bump to version 3.8.1

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

wireshark: fix wrong CFLAGS_FOR_BUILD assumption

Tested valid CFLAGS can't be pushed into CFLAGS_FOR_BUILD, they're
different compilers.

Fixes:
http://autobuild.buildroot.net/results/2b1/2b1a0654b649618422d65edf370b82476ba84491/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

dropbear: bump to version 2013.62

Bump to version 2013.62 with ECC support.
Switch the initscript to on-demand key generation and add systemd unit
file.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

iw: bump to version 3.13

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

support: fix typo in mkusers

This patch fixes typos in the 'encode_password' function calls.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

openssh: add systemd unit file

And only install sysV-style script when appropiate.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>