[Ada] Fix a folding issue with System'To_Address

2019-08-20  Bob Duff  <duff@adacore.com>

gcc/ada/

* sem_eval.adb (Expr_Value): Implement the case of an unchecked
conversion of a static expression.

From-SVN: r274726

[Ada] Warn on Unchecked_Conversion to zero-sized array

The compiler usually warns on Unchecked_Conversion between types with
mismatched sizes. This warning is now extended to the case where the
target type is a zero-sized array.

2019-08-20  Bob Duff  <duff@adacore.com>

gcc/ada/

* sem_ch13.adb (Is_Null_Array): New function, used to detect the
null array case; used to warn about uncheckedly converting to a
zero-sized array.  It is unfortunate that we can't just check
the size, and warn on all cases of converting from a
nonzero-sized type to a zero-sized one. That's because "0" means
two different things: "size is zero" and "size is unknown".
Until we fix that design flaw, we need this more targeted fix.

gcc/testsuite/

* gnat.dg/unchecked_convert14.adb: New testcase.

From-SVN: r274725

[Ada] Efficiency improvement in bounded ordered containers

The Delete operations in the bounded ordered containers have been
substantially sped up.  No change in semantics, so no test.

2019-08-20  Bob Duff  <duff@adacore.com>

gcc/ada/

* libgnat/a-cborma.adb, libgnat/a-cborse.adb (Clear): Repeatedly
call Delete. This avoids clearing the free list, which
substantially speeds up future Delete operations.

From-SVN: r274724

[Ada] Warning for out-of-order record representation clauses

The compiler can now warn for out-of-order record representation
clauses. A warning is given if the order of component declarations,
component clauses, and bit-level layout do not all agree.  The warning
is disabled by default, and may be enabled by the -gnatw_r switch.

2019-08-20  Bob Duff  <duff@adacore.com>

gcc/ada/

* sem_ch13.adb (Component_Order_Check): New procedure to check
for out-of-order clauses.
* warnsw.ads, warnsw.adb: New -gnatw_r switch.
* doc/gnat_ugn/building_executable_programs_with_gnat.rst:
Document new switch.
* gnat_ugn.texi: Regenerate.

From-SVN: r274723

[Ada] Object_Size clause specifying 0 bits is illegal

The patch gives an error message on "for T'Object_Size use 0;".

2019-08-20  Bob Duff  <duff@adacore.com>

gcc/ada/

* sem_ch13.adb (Object_Size): Give an error for zero. It really
rubs me the wrong way that we don't honor "for T'Object_Size use
0;", but it's not important enough to fix. In any case, if we're
not going to obey the clause, we should give an error.

gcc/testsuite/

* gnat.dg/object_size1.adb: New testcase.

From-SVN: r274722

[Ada] Pragma Warning_As_Error works for style warnings

Pragma Warning_As_Error now works for style warnings (messages that
start with "(style)", enabled by -gnaty) the same way it works for
regular warnings enabled by -gnatw.

The following test should fail to build with style checks:

gnat.adc:

pragma Warning_As_Error ("two spaces required");

style.adb:

procedure Style is
   X : Integer;
begin
   null;
   --Hello
end;

gnatmake -q -f -g style.adb -gnaty

should get:

style.adb:2:04: warning: variable "X" is never read and never assigned
style.adb:5:06: error: (style) two spaces required [warning-as-error]
style.adb:6:01: (style) "end Style" required
gnatmake: "style.adb" compilation error

and no executable should be created.

2019-08-20  Bob Duff  <duff@adacore.com>

gcc/ada/

* errout.adb (Error_Msg_Internal): Set Warn_Err in case of
Is_Style_Msg.
* erroutc.adb (Output_Msg_Text): Do Warnings_Treated_As_Errors
processing and [warning-as-error] modification for style
messages.  Clean up code, simplify, remove unnecessary block
statement, add renaming of table entry.
* erroutc.ads (Warning_Treated_As_Error): Fix comment: no such
thing as Set_Warning_As_Error.
* opt.ads: Clean up comments and move related declarations near
each other.
* par-prag.adb: Process Warning_As_Error. This is necessary
because many style warning happen during parsing.
* sem_prag.adb: Use new Acquire_Warning_Match_String.
* sem_util.ads, sem_util.adb (Acquire_Warning_Match_String): New
function shared by par-prag.adb and sem_prag.adb. Replaces the
procedure in sem_prag.adb. Avoid use of global variables.
* stringt.ads, stringt.adb (To_String): New function to convert
String_Id to String.
* doc/gnat_rm/implementation_defined_pragmas.rst: Document the
new feature.
* gnat_rm.texi: Regenerate.

From-SVN: r274721

[Ada] Get rid of linear searches in Lib

This change is aimed at removing a couple of linear searches in the
units management code that can become problematic performance-wise when
the number of loaded units is in the several hundreds, which can happen
for large files even at -O0 without any inlining.

It introduces an auxiliary hash table to record a mapping between the
name of units and their entry in the units table, and then replaces the
linear searches by lookups in this names table.  This can save up to 2%
of the compilation time spent in the front-end in some cases.

There should be no functional changes, except in the error message
issued for circular unit dependencies in very peculiar and convoluted
cases.

2019-08-20  Eric Botcazou  <ebotcazou@adacore.com>

gcc/ada/

* lib.ads: Add with clause for GNAT.HTable.
Add pragma Inline for Is_Loaded and alphabetize the list.
(Unit_Name_Table_Size): New constant.
(Unit_Name_Header_Num): New subtype.
(Unit_Name_Hash): New function declaration.
(Unit_Names): New simple hash table.
(Init_Unit_Name): New procedure declaration.
* lib.adb (Set_Unit_Name): Unregister the old name in the table,
if any, and then register the new name.
(Init_Unit_Name): New procedure.
(Is_Loaded): Reimplement using a lookup in the names table.
(Remove_Unit): Unregister the name.
(Unit_Name_Hash): New function.
* lib-load.adb (Create_Dummy_Package_Unit): Call Init_Unit_Name.
(Load_Unit): Use a lookup in the names table to find out whether
the unit has already been loaded.  Call Init_Unit_Name and then
Remove_Unit if the loading has failed.
(Make_Child_Decl_Unit): Call Init_Unit_Name.
(Make_Instance_Unit): Likewise.
* lib-writ.adb (Ensure_System_Dependency): Likewise.

From-SVN: r274720

[Ada] Sem_Ch13: fix uninitialized parameter static analysis warning

No functional change.

2019-08-20  Bob Duff  <duff@adacore.com>

gcc/ada/

* sem_ch13.adb (Record_Hole_Check): Initialize After_Last.

From-SVN: r274719

[Ada] Revert change for gnatprove that is no longer needed

Years ago, we adapted Get_Kind_Of_Unit so that gnatprove could use it to
detect both bodies and specs of predefined units.

However, this wasn't really needed: gnatprove could simply reuse
Lib.In_Predefined_Unit and now it does. This patch simply reverts two
commits mentioned above.

No frontend test provided, because the removed comment is clear that this
doesn't affect the compiler. Other tools similarly should not be affected
(at least they were not when this change was introduced in 2012).

2019-08-20  Piotr Trojanek  <trojanek@adacore.com>

gcc/ada/

* impunit.adb (Get_Kind_Of_Unit): Revert change for adapting
this routine for gnatprove.

From-SVN: r274718

[Ada] Document requirements for Pragma Lock_Free

2019-08-20  Arnaud Charlet  <charlet@adacore.com>

gcc/ada/

* doc/gnat_rm/implementation_defined_pragmas.rst: Document
requirements for Pragma Lock_Free.
* gnat_rm.texi: Regenerate.

From-SVN: r274717

[Ada] Initialize gnat_argc/gnat_argv only the first time

2019-08-20  Philippe Gil  <gil@adacore.com>

gcc/ada/

* bindgen.adb (Gen_Main): Set gnat_argc/gnat_argv to argc/argv
only when still uninitialized.

From-SVN: r274716

[Ada] Fix documentation for GNAT.Command_Line.Exit_From_Command_Line

2019-08-20  Bob Duff  <duff@adacore.com>

gcc/ada/

* libgnat/g-comlin.ads (Exit_From_Command_Line): Fix
documentation for GNAT.Command_Line.

From-SVN: r274715

[Ada] Add missing dot at the end of lang.opt doc for -fdump-scos

2019-08-20  Pierre-Marie de Rodat  <derodat@adacore.com>

gcc/ada/

PR ada/91492
* gcc-interface/lang.opt (-fdump-scos): Add missing dot at the
end of the documentation.

From-SVN: r274714

re PR rtl-optimization/91347 (hppa: wrong code generated with tail call optimisation)

PR rtl-optimization/91347
* dse.c (scan_insn): Call add_wild_read for non-const/memset tail calls
before reload if HARD_FRAME_POINTER_IS_ARG_POINTER.

From-SVN: r274708

Add a pass_by_reference flag to function_arg_info

This patch adds a flag that tells targets whether an argument
has been converted to pass-by-reference form.  This replaces
assign_parm_data_one::passed_pointer in function.c.

The flag is set automatically for places that call
apply_pass_by_reference_rules.  Places that apply
pass-by-reference manually need to set it themselves.

(After previous changes, no targets apply pass-by-reference
manually.  They all go through apply_pass_by_reference_rules.)

2019-08-20  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* calls.h (function_arg_info): Add a pass_by_reference field,
defaulting to false.
* calls.c (apply_pass_by_reference_rules): Set pass_by_reference
when applying pass-by-reference semantics.
(initialize_argument_information): Likewise.
(emit_library_call_value_1): Likewise.
* function.c (assign_parm_data_one): Remove passed_pointer field.
(assign_parm_find_data_types): Don't set it.
(assign_parm_find_stack_rtl, assign_parm_adjust_stack_rtl)
(assign_parm_setup_reg, assign_parms, gimplify_parameters): Use
arg.pass_by_reference instead of passed_pointer.

From-SVN: r274707

Make calls.c use function_arg_info internally

This patch makes the two main calls.c argument-processing
routines track the state of the argument in a function_arg_info
instead of using separate mode variables.

2019-08-20  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* calls.c (emit_library_call_value_1): Merge arg and orig_arg
into a single function_arg_info, updating its fields when we
apply pass-by-reference and promotion semantics.  Use the
function_arg_info to track the mode rather than keeping it in
a separate local variable.
(initialize_argument_information): Likewise.  Base the final
arg_to_skip on this new function_arg_info rather than creating
a new one from scratch.

From-SVN: r274706

Make function.c use function_arg_info internally

This patch adds a function_arg_info field to assign_parm_data_one,
so that:

  - passed_type -> arg.type
  - promoted_mode -> arg.mode
  - named_arg -> arg.named

We can then pass this function_arg_info directly to the converted
hooks.

Between the initialisation of the assign_parm_data_one and the
application of promotion rules (which is a state internal to
assign_parm_find_data_types), arg.mode is equivalent to passed_mode
(i.e. to TYPE_MODE).

2019-08-20  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* function.c (assign_parm_data_one): Replace passed_type,
promoted_mode and named_arg with a function_arg_info field.
(assign_parm_find_data_types): Remove local variables and
assign directly to "data".  Make data->passed_mode shadow
data->arg.mode until promotion, then assign the promoted
mode to data->arg.mode.
(assign_parms_setup_varargs, assign_parm_find_entry_rtl)
(assign_parm_find_stack_rtl, assign_parm_adjust_entry_rtl)
(assign_parm_remove_parallels, assign_parm_setup_block_p)
(assign_parm_setup_block, assign_parm_setup_reg)
(assign_parm_setup_stack, assign_parms, gimplify_parameters): Use
arg.mode instead of promoted_mode, arg.type instead of passed_type
and arg.named instead of named_arg.  Use data->arg for
function_arg_info structures that had the field values passed_type,
promoted_mode and named_arg.  Base other function_arg_infos on
data->arg, changing the necessary properties.

From-SVN: r274705

Add a apply_pass_by_reference_rules helper

This patch adds a helper routine that applies pass-by-reference
semantics to an existing function_arg_info.

The c6x part means that c6x_function_arg and c6x_function_arg_advance
see the same "named" value as pass_by_reference did, rather than
pass_by_reference seeing "true" and the others seeing "false".
This doesn't matter because the c6x port doesn't care about namedness.

The rs6000.c patch removes an assignment to "type", but the only
later code to use it was the patched promote_mode line.

(The reason for patching these places despite the above is that
often target code gets used as a basis for new targets or changes
to existing ones.)

2019-08-20  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* calls.h (apply_pass_by_reference_rules): Declare.
* calls.c (apply_pass_by_reference_rules): New function.
* config/c6x/c6x.c (c6x_call_saved_register_used): Use it.
* config/rs6000/rs6000-call.c (rs6000_parm_needs_stack): Likewise.
* config/s390/s390.c (s390_call_saved_register_used): Likewise.
* function.c (assign_parm_find_data_types): Likewise.
* var-tracking.c (prepare_call_arguments): Likewise.

From-SVN: r274704

Use function_arg_info for TARGET_MUST_PASS_IN_STACK

The hook is passed the promoted mode instead of the original type mode.

The expr.h reference in the documentation is no longer correct, but
pointing to calls.h or calls.c doesn't help much either.  I just left
this as-is since it's not related to the point of the series.

After previous changes, most places already pass arg.mode and arg.type.
Only i386 and mcore needed to construct a new one out of nothing.
rs6000 needs to construct one slightly earlier than before.

2019-08-20  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* target.def (must_pass_in_stack): Take a function_arg_info instead
of a mode and a type.
* doc/tm.texi: Regenerate.
* calls.h (must_pass_in_stack_var_size): Take a function_arg_info
instead of a mode and a type.
(must_pass_in_stack_var_size_or_pad): Likewise.
* calls.c (must_pass_in_stack_var_size): Likewise.
(must_pass_in_stack_var_size_or_pad): Likewise.
(initialize_argument_information): Update call to
targetm.calls.must_pass_in_stack.
(must_pass_va_arg_on_stack): Likewise.
* function.c (assign_parm_find_entry_rtl): Likewise.
* targhooks.c (hook_pass_by_reference_must_pass_in_stack): Likewise.
* config/alpha/alpha.c (alpha_function_arg): Likewise.
(alpha_function_arg_advance): Likewise.
* config/cr16/cr16.c (cr16_function_arg): Likewise.
(cr16_function_arg_advance): Likewise.
* config/cris/cris.c (cris_pass_by_reference): Likewise.
(cris_arg_partial_bytes): Likewise.
* config/iq2000/iq2000.c (iq2000_pass_by_reference): Likewise.
* config/lm32/lm32.c (lm32_function_arg): Likewise.
* config/mcore/mcore.c (mcore_num_arg_regs): Likewise.
(mcore_function_arg, mcore_arg_partial_bytes): Likewise.
* config/mips/mips.c (mips_pass_by_reference): Likewise.
* config/mmix/mmix.c (mmix_function_arg_advance): Likewise.
(mmix_function_arg_1, mmix_pass_by_reference): Likewise.
* config/sh/sh.c (sh_pass_by_reference): Likewise.
* config/stormy16/stormy16.c (xstormy16_function_arg): Likewise.
* config/xtensa/xtensa.c (xtensa_function_arg_advance): Likewise.
* config/arm/arm.c (arm_must_pass_in_stack): Take a function_arg_info
instead of a mode and a type.
* config/fr30/fr30.c (fr30_must_pass_in_stack): Likewise.
(fr30_num_arg_regs): Likewise.
(fr30_setup_incoming_varargs): Update calls accordingly.
(fr30_arg_partial_bytes, fr30_function_arg): Likewise.
(fr30_function_arg_advance): Likewise.
* config/frv/frv.c (frv_must_pass_in_stack): Take a function_arg_info
instead of a mode and a type.
* config/gcn/gcn.c (num_arg_regs): Likewise.
(gcn_function_arg, gcn_function_arg_advance): Update calls to
num_arg_regs and targetm.calls.must_pass_in_stack.
(gcn_arg_partial_bytes): Likewise.
* config/i386/i386.c (ix86_must_pass_in_stack): Take a
function_arg_info instead of a mode and a type.
(classify_argument): Update call accordingly.
* config/nds32/nds32.c (nds32_must_pass_in_stack): Take a
function_arg_info instead of a mode and a type.
* config/rs6000/rs6000-internal.h (rs6000_must_pass_in_stack):
Likewise.
* config/rs6000/rs6000-call.c (rs6000_must_pass_in_stack): Likewise.
(rs6000_parm_needs_stack): Update call accordingly.
(setup_incoming_varargs): Likewise.

From-SVN: r274703

Use function_arg_info for TARGET_CALLEE_COPIES

The hook is passed the unpromoted type mode instead of the promoted mode.

The aarch64 definition is redundant, but worth keeping for emphasis.

2019-08-20  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* target.def (callee_copies): Take a function_arg_info instead
of a mode, type and named flag.
* doc/tm.texi: Regenerate.
* targhooks.h (hook_callee_copies_named): Take a function_arg_info
instead of a mode, type and named flag.
(hook_bool_CUMULATIVE_ARGS_mode_tree_bool_false): Delete.
(hook_bool_CUMULATIVE_ARGS_mode_tree_bool_true): Likewise.
(hook_bool_CUMULATIVE_ARGS_arg_info_true): New function.
* targhooks.c (hook_callee_copies_named): Take a function_arg_info
instead of a mode, type and named flag.
(hook_bool_CUMULATIVE_ARGS_mode_tree_bool_false): Delete.
(hook_bool_CUMULATIVE_ARGS_mode_tree_bool_true): Likewise.
(hook_bool_CUMULATIVE_ARGS_arg_info_true): New function.
* calls.h (reference_callee_copied): Take a function_arg_info
instead of a mode, type and named flag.
* calls.c (reference_callee_copied): Likewise.
(initialize_argument_information): Update call accordingly.
(emit_library_call_value_1): Likewise.
* function.c (gimplify_parameters): Likewise.
* config/aarch64/aarch64.c (TARGET_CALLEE_COPIES): Define to
hook_bool_CUMULATIVE_ARGS_arg_info_false instead of
hook_bool_CUMULATIVE_ARGS_mode_tree_bool_false.
* config/c6x/c6x.c (c6x_callee_copies): Delete.
(TARGET_CALLEE_COPIES): Define to
hook_bool_CUMULATIVE_ARGS_arg_info_true instead.
* config/epiphany/epiphany.c (TARGET_CALLEE_COPIES): Define to
hook_bool_CUMULATIVE_ARGS_arg_info_true instead of
hook_bool_CUMULATIVE_ARGS_mode_tree_bool_true.
* config/mips/mips.c (mips_callee_copies): Take a function_arg_info
instead of a mode, type and named flag.
* config/mmix/mmix.c (TARGET_CALLEE_COPIES): Define to
hook_bool_CUMULATIVE_ARGS_arg_info_true instead of
hook_bool_CUMULATIVE_ARGS_mode_tree_bool_true.
* config/mn10300/mn10300.c (TARGET_CALLEE_COPIES): Likewise.
* config/msp430/msp430.c (msp430_callee_copies): Delete.
(TARGET_CALLEE_COPIES): Define to
hook_bool_CUMULATIVE_ARGS_arg_info_true instead.
* config/pa/pa.c (pa_callee_copies): Take a function_arg_info
instead of a mode, type and named flag.
* config/sh/sh.c (sh_callee_copies): Likewise.
* config/v850/v850.c (TARGET_CALLEE_COPIES): Define to
hook_bool_CUMULATIVE_ARGS_arg_info_true instead of
hook_bool_CUMULATIVE_ARGS_mode_tree_bool_true.

From-SVN: r274702

Use function_arg_info for TARGET_FUNCTION_ARG_ADVANCE

There seems to be a bit of confusion around this one.  Almost all
callers pass the same arguments as TARGET_FUNCTION_ARG, meaning
that the mode is the promoted mode rather than the type mode.
But the calls.c handling for normal typed arguments instead passes
the unpromoted TYPE_MODE (despite passing the promoted mode to
TARGET_FUNCTION_ARG).  I've kept this behaviour with a ??? comment.

(The calls.c handling of libgcc functions does pass the promoted
mode though, as does the function.c handling of incoming arguments.)

Also, a couple of the arm callers don't seem to be using the hook
correctly.  Again I kept the current choices and added a ??? comment.

2019-08-20  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* target.def (function_arg_advance): Take a function_arg_info instead
of a mode, type and named flag.
* doc/tm.texi: Regenerate.
* targhooks.h (default_function_arg_advance): Take a function_arg_info
instead of a mode, type and named flag.
* targhooks.c (default_function_arg_advance): Likewise.
* calls.c (initialize_argument_information): Update call to
targetm.calls.function_arg_advance.
(emit_library_call_value_1): Likewise.
* dse.c (get_call_args): Likewise.
* expr.c (block_move_libcall_safe_for_call_parm): Likewise.
* function.c (assign_parms, gimplify_parameters): Likewise.
* var-tracking.c (prepare_call_arguments): Likewise.
* config/aarch64/aarch64.c (aarch64_function_arg_advance): Take a
function_arg_info instead of a mode, type and named flag.
(aarch64_setup_incoming_varargs): Update call accordingly.
* config/alpha/alpha.c (alpha_function_arg_advance): Take a
function_arg_info instead of a mode, type and named flag.
(alpha_setup_incoming_varargs): Update call accordingly.
* config/arc/arc.c (arc_function_arg_advance): Take a
function_arg_info instead of a mode, type and named flag.
(arc_setup_incoming_varargs): Update call accordingly.
* config/arm/arm.c (arm_function_arg_advance): Take a
function_arg_info instead of a mode, type and named flag.
(cmse_func_args_or_return_in_stack): Update call accordingly.
(arm_function_ok_for_sibcall): Likewise.
(cmse_nonsecure_call_clear_caller_saved): Likewise.
* config/avr/avr.c (avr_function_arg_advance): Take a
function_arg_info instead of a mode, type and named flag.
* config/bfin/bfin.c (bfin_function_arg_advance): Likewise.
* config/c6x/c6x.c (c6x_function_arg_advance): Likewise.
(c6x_call_saved_register_used): Update call accordingly.
* config/cr16/cr16.c (cr16_function_arg_advance): Take a
function_arg_info instead of a mode, type and named flag.
* config/cris/cris.c (cris_function_arg_advance): Likewise.
* config/csky/csky.c (csky_function_arg_advance): Likewise.
(csky_setup_incoming_varargs): Update call accordingly.
* config/epiphany/epiphany.c (epiphany_function_arg_advance): Take a
function_arg_info instead of a mode, type and named flag.
* config/fr30/fr30.c (fr30_function_arg_advance): Likewise.
* config/frv/frv.c (frv_function_arg_advance): Likewise.
* config/ft32/ft32.c (ft32_function_arg_advance): Likewise.
* config/gcn/gcn.c (gcn_function_arg_advance): Likewise.
* config/h8300/h8300.c (h8300_function_arg_advance): Likewise.
* config/i386/i386.c (ix86_function_arg_advance): Likewise.
(ix86_setup_incoming_varargs): Update call accordingly.
* config/ia64/ia64.c (ia64_function_arg_advance): Take a
function_arg_info instead of a mode, type and named flag.
(ia64_setup_incoming_varargs): Update call accordingly.
* config/iq2000/iq2000.c (iq2000_function_arg_advance): Take a
function_arg_info instead of a mode, type and named flag.
(iq2000_expand_prologue): Update call accordingly.
* config/lm32/lm32.c (lm32_function_arg_advance): Take a
function_arg_info instead of a mode, type and named flag.
* config/m32c/m32c.c (m32c_function_arg_advance): Likewise.
* config/m32r/m32r.c (m32r_function_arg_advance): Likewise.
* config/m68k/m68k.c (m68k_function_arg_advance): Likewise.
* config/mcore/mcore.c (mcore_function_arg_advance): Likewise.
* config/microblaze/microblaze.c (microblaze_function_arg_advance):
Likewise.
(microblaze_expand_prologue): Update call accordingly.
* config/mips/mips.c (mips_function_arg_advance): Take a
function_arg_info instead of a mode, type and named flag.
(mips_setup_incoming_varargs): Update call accordingly.
(mips_output_args_xfer): Likewise.
* config/mmix/mmix.c (mmix_function_arg_advance): Take a
function_arg_info instead of a mode, type and named flag.
* config/mn10300/mn10300.c (mn10300_function_arg_advance): Likewise.
* config/moxie/moxie.c (moxie_function_arg_advance): Likewise.
* config/msp430/msp430.c (msp430_function_arg_advance): Likewise.
* config/nds32/nds32.c (nds32_function_arg_advance): Likewise.
* config/nios2/nios2.c (nios2_function_arg_advance): Likewise.
(nios2_setup_incoming_varargs): Update call accordingly.
* config/nvptx/nvptx.c (nvptx_function_arg_advance): Take a
function_arg_info instead of a mode, type and named flag.
* config/or1k/or1k.c (or1k_function_arg_advance): Likewise.
* config/pa/pa.c (pa_function_arg_advance): Likewise.
* config/pdp11/pdp11.c (pdp11_function_arg_advance): Likewise.
* config/pru/pru.c (pru_function_arg_advance): Likewise.
* config/riscv/riscv.c (riscv_function_arg_advance): Likewise.
(riscv_setup_incoming_varargs): Update call accordingly.
* config/rl78/rl78.c (rl78_function_arg_advance): Take a
function_arg_info instead of a mode, type and named flag.
* config/rs6000/rs6000-internal.h (rs6000_function_arg_advance):
Likewise.
* config/rs6000/rs6000-call.c (rs6000_function_arg_advance): Likewise.
(rs6000_parm_needs_stack): Update call accordingly.
* config/rx/rx.c (rx_function_arg_advance): Take a function_arg_info
instead of a mode, type and named flag.
* config/s390/s390.c (s390_function_arg_advance): Likewise.
(s390_call_saved_register_used): Update call accordingly.
* config/sh/sh.c (sh_function_arg_advance): Take a function_arg_info
instead of a mode, type and named flag.
(sh_output_mi_thunk): Update call accordingly.
* config/sparc/sparc.c (sparc_function_arg_advance): Take a
function_arg_info instead of a mode, type and named flag.
* config/spu/spu.c (spu_function_arg_advance): Likewise.
(spu_setup_incoming_varargs): Update call accordingly.
* config/stormy16/stormy16.c (xstormy16_function_arg_advance): Take a
function_arg_info instead of a mode, type and named flag.
* config/tilegx/tilegx.c (tilegx_function_arg_advance): Likewise.
(tilegx_setup_incoming_varargs): Update call accordingly.
* config/tilepro/tilepro.c (tilepro_function_arg_advance): Take a
function_arg_info instead of a mode, type and named flag.
(tilegx_setup_incoming_varargs): Update call accordingly.
* config/v850/v850.c (v850_function_arg_advance): Take a
function_arg_info instead of a mode, type and named flag.
* config/vax/vax.c (vax_function_arg_advance): Likewise.
* config/visium/visium.c (visium_function_arg_advance): Likewise.
(visium_setup_incoming_varargs): Update call accordingly.
* config/xtensa/xtensa.c (xtensa_function_arg_advance): Take a
function_arg_info instead of a mode, type and named flag.

From-SVN: r274701

Use function_arg_info for TARGET_FUNCTION_(INCOMING_)ARG

This patch makes both TARGET_FUNCTION_ARG and
TARGET_FUNCTION_INCOMING_ARG take a function_arg_info.
They have to be done together since many targets use the
same function for both.

The hooks are passed the promoted mode instead of the original type mode.

2019-08-20  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* target.def (function_arg, function_incoming_arg): Take a
function_arg_info instead of a mode, tree and named flag.
* doc/tm.texi: Regenerate.
* targhooks.h (default_function_arg): Take a function_arg_info
instead of a mode, tree and named flag.
(default_function_incoming_arg): Likewise.
* targhooks.c (default_function_arg): Likewise.
(default_function_incoming_arg): Likewise.
* calls.h (function_arg_info::end_marker_p): New function.
(function_arg_info::end_marker): Likewise.
* calls.c (prepare_call_address, initialize_argument_information)
(expand_call, emit_library_call_value_1): Update calls to
targetm.calls.function_arg and targetm.calls.function_incoming_arg.
* dse.c: Include calls.h.
(get_call_args): Update call to targetm.calls.function_arg.
* expr.c (block_move_libcall_safe_for_call_parm): Likewise.
* var-tracking.c (prepare_call_arguments): Likewise.
* function.c (assign_parm_find_entry_rtl): Update call to
targetm.calls.function_incoming_arg.
* config/aarch64/aarch64.c (aarch64_function_arg): Take a
function_arg_info instead of a mode, tree and named flag.
* config/alpha/alpha.c (alpha_function_arg): Likewise.
* config/arc/arc.c (arc_function_arg): Likewise.
* config/arm/arm.c (arm_function_arg): Likewise.
(cmse_func_args_or_return_in_stack): Update call accordingly.
(arm_function_ok_for_sibcall): Likewise.
(cmse_nonsecure_call_clear_caller_saved): Likewise.
* config/avr/avr.c (avr_function_arg): Take a function_arg_info
instead of a mode, tree and named flag.
* config/bfin/bfin.c (bfin_function_arg): Likewise.
* config/c6x/c6x.c (c6x_function_arg): Likewise.
(c6x_call_saved_register_used): Update call accordingly.
* config/cr16/cr16.c (cr16_function_arg): Take a function_arg_info
instead of a mode, tree and named flag.
* config/cris/cris.c (cris_function_arg, cris_function_incoming_arg)
(cris_function_arg_1): Likewise.
* config/csky/csky.c (csky_function_arg): Likewise.
* config/epiphany/epiphany.c (epiphany_function_arg): Likewise.
* config/fr30/fr30.c (fr30_function_arg): Likewise.
* config/frv/frv.c (frv_function_arg, frv_function_incoming_arg)
(frv_function_arg_1): Likewise.
* config/ft32/ft32.c (ft32_function_arg): Likewise.
* config/gcn/gcn.c (gcn_function_arg): Likewise.
* config/h8300/h8300.c (h8300_function_arg): Likewise.
* config/i386/i386.c (ix86_function_arg): Likewise.
* config/ia64/ia64.c (ia64_function_arg, ia64_function_incoming_arg)
(ia64_function_arg_1): Likewise.
* config/iq2000/iq2000.c (iq2000_function_arg): Likewise.
(iq2000_expand_prologue, iq2000_pass_by_reference): Update call
accordingly.
* config/lm32/lm32.c (lm32_function_arg): Take a function_arg_info
instead of a mode, tree and named flag.
* config/m32c/m32c.c (m32c_function_arg): Likewise.
* config/m32r/m32r.c (m32r_function_arg): Likewise.
* config/m68k/m68k.c (m68k_function_arg): Likewise.
* config/mcore/mcore.c (mcore_function_arg): Likewise.
* config/microblaze/microblaze.c (microblaze_function_arg): Likewise.
(microblaze_expand_prologue): Update call accordingly.
* config/mips/mips.c (mips_function_arg): Take a function_arg_info
instead of a mode, tree and named flag.
* config/mmix/mmix.c (mmix_function_incoming_arg, mmix_function_arg)
(mmix_function_arg_1): Likewise.
* config/mn10300/mn10300.c (mn10300_function_arg): Likewise.
* config/moxie/moxie.c (moxie_function_arg): Likewise.
* config/msp430/msp430.c (msp430_function_arg): Likewise.
* config/nds32/nds32.c (nds32_function_arg): Likewise.
* config/nios2/nios2.c (nios2_function_arg): Likewise.
* config/nvptx/nvptx.c (nvptx_function_arg): Likewise.
(nvptx_function_incoming_arg): Likewise.
* config/or1k/or1k.c (or1k_function_arg): Likewise.
* config/pa/pa.c (pa_function_arg): Likewise.
* config/pdp11/pdp11.c (pdp11_function_arg): Likewise.
* config/pru/pru.c (pru_function_arg): Likewise.
* config/riscv/riscv.c (riscv_function_arg): Likewise.
* config/rl78/rl78.c (rl78_function_arg): Likewise.
* config/rs6000/rs6000-internal.h (rs6000_function_arg): Likewise.
* config/rs6000/rs6000-call.c (rs6000_function_arg): Likewise.
(rs6000_parm_needs_stack): Update call accordingly.
* config/rx/rx.c (rx_function_arg): Take a function_arg_info
instead of a mode, tree and named flag.
* config/s390/s390.c (s390_function_arg): Likewise.
(s390_call_saved_register_used): Update call accordingly.
* config/sh/sh.c (sh_function_arg): Take a function_arg_info
instead of a mode, tree and named flag.
(sh_output_mi_thunk): Update call accordingly.
* config/sparc/sparc.c (sparc_function_arg_1, sparc_function_arg)
(sparc_function_incoming_arg): Take a function_arg_info instead of
a mode, tree and named flag.
* config/spu/spu.c (spu_function_arg): Likewise.
* config/stormy16/stormy16.c (xstormy16_function_arg): Likewise.
* config/tilegx/tilegx.c (tilegx_function_arg): Likewise.
* config/tilepro/tilepro.c (tilepro_function_arg): Likewise.
* config/v850/v850.c (v850_function_arg): Likewise.
* config/vax/vax.c (vax_function_arg): Likewise.
* config/visium/visium.c (visium_function_arg): Likewise.
* config/xtensa/xtensa.c (xtensa_function_arg_1, xtensa_function_arg)
(xtensa_function_incoming_arg): Likewise.

From-SVN: r274700

Use function_arg_info for TARGET_SETUP_INCOMING_ARGS

The hook is passed the promoted mode instead of the original type mode.

2019-08-20  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* target.def (setup_incoming_varargs): Take a function_arg_info
instead of a mode and tree.
* doc/tm.texi: Regenerate.
* targhooks.h (default_setup_incoming_varargs): Take a
function_arg_info instead of a mode and tree.
* targhooks.c (default_setup_incoming_varargs): Likewise.
* config/aarch64/aarch64.c (aarch64_setup_incoming_varargs): Likewise.
* config/alpha/alpha.c (alpha_setup_incoming_varargs): Likewise.
* config/arc/arc.c (arc_setup_incoming_varargs): Likewise.
* config/arm/arm.c (arm_setup_incoming_varargs): Likewise.
* config/bfin/bfin.c (setup_incoming_varargs): Likewise.
* config/cris/cris.c (cris_setup_incoming_varargs): Likewise.
* config/csky/csky.c (csky_setup_incoming_varargs): Likewise.
* config/epiphany/epiphany.c (epiphany_setup_incoming_varargs):
Likewise.
* config/fr30/fr30.c (fr30_setup_incoming_varargs): Likewise.
* config/frv/frv.c (frv_setup_incoming_varargs): Likewise.
* config/ft32/ft32.c (ft32_setup_incoming_varargs): Likewise.
* config/i386/i386.c (ix86_setup_incoming_varargs): Likewise.
* config/ia64/ia64.c (ia64_setup_incoming_varargs): Likewise.
* config/iq2000/iq2000.c (iq2000_setup_incoming_varargs): Likewise.
* config/lm32/lm32.c (lm32_setup_incoming_varargs): Likewise.
* config/m32r/m32r.c (m32r_setup_incoming_varargs): Likewise.
* config/mcore/mcore.c (mcore_setup_incoming_varargs): Likewise.
* config/mips/mips.c (mips_setup_incoming_varargs): Likewise.
* config/mmix/mmix.c (mmix_setup_incoming_varargs): Likewise.
* config/moxie/moxie.c (moxie_setup_incoming_varargs): Likewise.
* config/nds32/nds32.c (nds32_setup_incoming_varargs): Likewise.
* config/nios2/nios2.c (nios2_setup_incoming_varargs): Likewise.
* config/riscv/riscv.c (riscv_setup_incoming_varargs): Likewise.
* config/rs6000/rs6000-internal.h (setup_incoming_varargs): Likewise.
* config/rs6000/rs6000-call.c (setup_incoming_varargs): Likewise.
* config/sh/sh.c (sh_setup_incoming_varargs): Likewise.
* config/spu/spu.c (spu_setup_incoming_varargs): Likewise.
* config/tilegx/tilegx.c (tilegx_setup_incoming_varargs): Likewise.
* config/tilepro/tilepro.c (tilepro_setup_incoming_varargs): Likewise.
* config/visium/visium.c (visium_setup_incoming_varargs): Likewise.
* function.c (assign_parms_setup_varargs): Update call to
targetm.calls.setup_incoming_varargs.

From-SVN: r274699

Use function_arg_info for TARGET_PASS_BY_REFERENCE

The hook is passed the unpromoted type mode instead of the promoted mode.

2019-08-20  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* target.def (pass_by_reference): Take a function_arg_info instead
of a mode, type and named flag.
* doc/tm.texi: Regenerate.
* targhooks.h (hook_pass_by_reference_must_pass_in_stack): Update
accordingly.
(hook_bool_CUMULATIVE_ARGS_arg_info_false): Declare.
* targhooks.c (hook_pass_by_reference_must_pass_in_stack): Take a
function_arg_info instead of a mode, type and named flag.
(hook_bool_CUMULATIVE_ARGS_arg_info_false): New function.
* calls.h (pass_by_reference): Take a function_arg_info instead of a
mode, type and named flag.
* calls.c (pass_by_reference): Likewise.
(pass_va_arg_by_reference): Update call accordingly.
(initialize_argument_information): Likewise.
(emit_library_call_value_1): Likewise.
* function.c (assign_parm_find_data_types): Likewise.
* var-tracking.c (prepare_call_arguments): Likewise.
* stor-layout.c: Include calls.h.
(compute_record_mode): Update call to targetm.calls.pass_by_reference.
* config/aarch64/aarch64.c (aarch64_pass_by_reference): Take a
function_arg_info instead of a mode, type and named flag.
* config/alpha/alpha.c (alpha_pass_by_reference): Likewise.
* config/arc/arc.c (arc_pass_by_reference): Likewise.
* config/arm/arm.c (arm_pass_by_reference): Likewise.
* config/bfin/bfin.c (bfin_pass_by_reference): Likewise.
* config/c6x/c6x.c (c6x_pass_by_reference): Likewise.
(c6x_call_saved_register_used): Update call to pass_by_reference.
* config/cris/cris.c (cris_pass_by_reference): Take a
function_arg_info instead of a mode, type and named flag.
* config/epiphany/epiphany.c (epiphany_pass_by_reference): Take a
function_arg_info instead of a mode, type and named flag.
(epiphany_arg_partial_bytes): Update call accordingly.
* config/ft32/ft32.c (ft32_pass_by_reference): Take a
function_arg_info instead of a mode, type and named flag.
(ft32_arg_partial_bytes): Update call accordingly.
* config/i386/i386.c (ix86_pass_by_reference): Take a
function_arg_info instead of a mode, type and named flag.
* config/iq2000/iq2000.c (iq2000_pass_by_reference): Likewise.
* config/m32c/m32c.c (m32c_pass_by_reference): Likewise.
* config/m32r/m32r.c (m32r_pass_by_reference): Likewise.
(m32r_return_in_memory): Update call accordingly.
* config/mips/mips.c (mips_pass_by_reference): Take a
function_arg_info instead of a mode, type and named flag.
* config/mmix/mmix.c (mmix_pass_by_reference): Likewise.
* config/mn10300/mn10300.c (mn10300_pass_by_reference): Likewise.
* config/moxie/moxie.c (moxie_pass_by_reference): Likewise.
(moxie_arg_partial_bytes): Update call accordingly.
* config/msp430/msp430.c (msp430_pass_by_reference): Take a
function_arg_info instead of a mode, type and named flag.
* config/nvptx/nvptx.c (nvptx_pass_by_reference): Likewise.
* config/or1k/or1k.c (or1k_pass_by_reference): Likewise.
* config/pa/pa.c (pa_pass_by_reference): Likewise.
* config/riscv/riscv.c (riscv_pass_by_reference): Likewise.
(riscv_return_in_memory): Update call accordingly.
* config/rs6000/rs6000-internal.h (rs6000_pass_by_reference): Take a
function_arg_info instead of a mode, type and named flag.
* config/rs6000/rs6000-call.c (rs6000_pass_by_reference): Likewise.
(rs6000_parm_needs_stack): Update call to pass_by_reference.
* config/s390/s390.c (s390_pass_by_reference): Take a
function_arg_info instead of a mode, type and named flag.
(s390_call_saved_register_used): Update call accordingly.
* config/sh/sh.c (sh_pass_by_reference): Take a function_arg_info
instead of a mode, type and named flag.
* config/sparc/sparc.c (sparc_pass_by_reference): Likewise.
* config/spu/spu.c (spu_pass_by_reference): Likewise.
* config/tilegx/tilegx.c (tilegx_pass_by_reference): Likewise.
* config/tilepro/tilepro.c (tilepro_pass_by_reference): Likewise.
* config/v850/v850.c (v850_pass_by_reference): Likewise.
* config/visium/visium.c (visium_pass_by_reference): Likewise.

gcc/ada/
* gcc-interface/misc.c (default_pass_by_ref): Update call to
pass_by_reference.

From-SVN: r274698

Use function_arg_info for TARGET_ARG_PARTIAL_BYTES

This patch adds the function_arg_info class and uses it for
TARGET_ARG_PARTIAL_BYTES.

The hook is passed the promoted mode instead of the original type mode.

The arguments aren't mentioned in the documentation, which is why the
target.def change is so small.

The patch changes "true" to "arg.named" in:

  gcc_assert (!epiphany_pass_by_reference (cum, mode, type, /* named */ true));

but epiphany_pass_by_reference doesn't care about the named flag.

2019-08-20  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* target.def (arg_partial_bytes): Take a function_arg_info instead
of a mode, type and named flag.
* doc/tm.texi: Regenerate.
* target.h (function_arg_info): Declare.
* calls.h (function_arg_info): New class.
* targhooks.h (hook_int_CUMULATIVE_ARGS_mode_tree_bool_0): Delete.
(hook_int_CUMULATIVE_ARGS_arg_info_0): Declare.
* targhooks.c (hook_int_CUMULATIVE_ARGS_mode_tree_bool_0): Delete.
(hook_int_CUMULATIVE_ARGS_arg_info_0): New function.
* calls.c (initialize_argument_information): Update call to
targetm.calls.partial_bytes.
(emit_library_call_value_1): Likewise.
* expr.c (block_move_libcall_safe_for_call_parm): Likewise.
* function.c (assign_parm_find_entry_rtl): Likewise.
* config/alpha/alpha.c (alpha_arg_partial_bytes): Take a
function_arg_info instead of a mode, type and named flag.
* config/arc/arc.c (arc_arg_partial_bytes): Likewise.
* config/arm/arm.c (arm_arg_partial_bytes): Likewise.
(cmse_func_args_or_return_in_stack): Update accordingly.
* config/bfin/bfin.c (bfin_arg_partial_bytes): Take a
function_arg_info instead of a mode, type and named flag.
* config/cris/cris.c (cris_arg_partial_bytes): Likewise.
* config/csky/csky.c (csky_arg_partial_bytes): Likewise.
* config/epiphany/epiphany.c (epiphany_arg_partial_bytes): Likewise.
* config/fr30/fr30.c: Include calls.h.
(fr30_arg_partial_bytes): Take a function_arg_info instead of a mode,
type and named flag.
* config/frv/frv.c: Include calls.h.
(frv_arg_partial_bytes): Take a function_arg_info instead of a mode,
type and named flag.
* config/ft32/ft32.c (ft32_arg_partial_bytes): Likewise.
* config/gcn/gcn.c (gcn_arg_partial_bytes): Likewise.
* config/ia64/ia64.c (ia64_arg_partial_bytes): Likewise.
* config/iq2000/iq2000.c (iq2000_arg_partial_bytes): Likewise.
* config/m32r/m32r.c (m32r_arg_partial_bytes): Likewise.
* config/mcore/mcore.c (mcore_arg_partial_bytes): Likewise.
* config/microblaze/microblaze.c (function_arg_partial_bytes):
Likewise.
* config/mips/mips.c (mips_arg_partial_bytes): Likewise.
* config/mn10300/mn10300.c (mn10300_arg_partial_bytes): Likewise.
* config/moxie/moxie.c (moxie_arg_partial_bytes): Likewise.
* config/msp430/msp430.c (msp430_arg_partial_bytes): Likewise.
* config/nds32/nds32.c (nds32_arg_partial_bytes): Likewise.
* config/nios2/nios2.c (nios2_arg_partial_bytes): Likewise.
* config/pa/pa.c (pa_arg_partial_bytes): Likewise.
* config/pru/pru.c (pru_arg_partial_bytes): Likewise.
* config/riscv/riscv.c (riscv_arg_partial_bytes): Likewise.
* config/rs6000/rs6000-internal.h (rs6000_arg_partial_bytes): Likewise.
* config/rs6000/rs6000-call.c (rs6000_arg_partial_bytes): Likewise.
(rs6000_parm_needs_stack): Update call accordingly.
* config/sh/sh.c (sh_arg_partial_bytes): Take a
function_arg_info instead of a mode, type and named flag.
* config/sparc/sparc.c (sparc_arg_partial_bytes): Likewise.
* config/v850/v850.c (v850_arg_partial_bytes): Likewise.

From-SVN: r274697

Add must_pass_va_arg_in_stack

This patch splits out another idiom from the va_arg gimplification
routines, so that there's only one place to update later.

2019-08-20  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* calls.h (must_pass_va_arg_in_stack): Declare.
* calls.c (must_pass_va_arg_in_stack): New function.
* config/alpha/alpha.c (alpha_gimplify_va_arg_1): Use it.
* config/sh/sh.c (sh_gimplify_va_arg_expr): Likewise.
* config/stormy16/stormy16.c (xstormy16_gimplify_va_arg_expr):
Likewise.
* config/xtensa/xtensa.c (xtensa_gimplify_va_arg_expr): Likewise.

From-SVN: r274696

Add pass_va_arg_by_reference

This patch splits out a common idiom from the va_arg gimplification
routines, so that there's only one place to update later.

2019-08-20  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* calls.h (pass_va_arg_by_reference): Declare.
* calls.c (pass_va_arg_by_reference): New function.
* config/aarch64/aarch64.c (aarch64_gimplify_va_arg_expr): Use it.
* config/alpha/alpha.c (alpha_gimplify_va_arg): Likewise.
* config/gcn/gcn.c (gcn_gimplify_va_arg_expr): Likewise.
* config/i386/i386.c (ix86_gimplify_va_arg): Likewise.
* config/ia64/ia64.c (ia64_gimplify_va_arg): Likewise.
* config/mips/mips.c (mips_std_gimplify_va_arg_expr): Likewise.
(mips_gimplify_va_arg_expr): Likewise.
* config/msp430/msp430.c (msp430_gimplify_va_arg_expr): Likewise.
* config/pa/pa.c (hppa_gimplify_va_arg_expr): Likewise.
* config/rs6000/rs6000-call.c (rs6000_gimplify_va_arg): Likewise.
* config/s390/s390.c (s390_gimplify_va_arg): Likewise.
* config/sparc/sparc.c (sparc_gimplify_va_arg): Likewise.
* config/spu/spu.c (spu_gimplify_va_arg_expr): Likewise.
* config/tilegx/tilegx.c (tilegx_gimplify_va_arg_expr): Likewise.
* config/tilepro/tilepro.c (tilepro_gimplify_va_arg_expr): Likewise.
* config/visium/visium.c (visium_gimplify_va_arg): Likewise.
* config/xtensa/xtensa.c (xtensa_gimplify_va_arg_expr): Likewise.
* targhooks.c (std_gimplify_va_arg_expr): Likewise.

From-SVN: r274695

re PR target/91498 (STV change in r274481 causes 300.twolf regression on Haswell)

2019-08-20  Richard Biener  <rguenther@suse.de>

PR target/91498
* config/i386/i386-features.c (general_scalar_chain::convert_op):
Use (vec_merge (vec_duplicate..)) style vector from scalar move.
(convert_scalars_to_vector): Add timode_p parameter and use it
to guard TImode-only operation.
(pass_stv::gate): Adjust so STV runs twice for TARGET_64BIT.
(pass_stv::execute): Pass down timode_p.

* gcc.target/i386/minmax-7.c: New testcase.

From-SVN: r274694

Add TIGERLAKE and COOPERLAKE to GCC.

2019-08-20  Lili Cui  <lili.cui@intel.com>

gcc/
* common/config/i386/i386-common.c
(processor_names): Add tigerlake and cooperlake.
(processor_alias_table): Add tigerlake and cooperlake.
* config.gcc: Add -march=tigerlake and cooperlake.
* config/i386/driver-i386.c
(host_detect_local_cpu): Detect tigerlake and cooperlake.
Add "has_avx" to classify processor.
* config/i386/i386-builtins.c (processor_model):
Add M_INTEL_COREI7_TIGERLAKE and M_INTEL_COREI7_COOPERLAKE.
(arch_names_table): Add tigerlake and cooperlake.
(get_builtin_code_for_version) : Handle PROCESSOR_TIGERLAKE and
PROCESSOR_COOPERLAKE.
* config/i386/i386-c.c
(ix86_target_macros_internal): Handle tigerlake and cooperlake.
* config/i386/i386-options.c
(m_TIGERLAKE)  : Define.
(m_COOPERLAKE) : Ditto.
(m_CORE_AVX512): Ditto.
(processor_cost_table): Add cascadelake.
(ix86_option_override_internal): Hadle PTA_MOVDIRI, PTA_MOVDIR64B.
* config/i386/i386.h
(ix86_size_cost) : Define TARGET_TIGERLAKE and TARGET_COOPERLAKE.
(processor_type) : Add PROCESSOR_TIGERLAKE and PROCESSOR_COOPERLAKE.
(PTA_MOVDIRI): Ditto.
(PTA_MOVDIR64B): Ditto.
(PTA_COOPERLAKE) : Ditto.
(PTA_TIGERLAKE)  : Ditto.
(processor_type) : Add PROCESSOR_TIGERLAKE and PROCESSOR_COOPERLAKE.
* doc/extend.texi: Add tigerlake and cooperlake.
* doc/invoke.texi: Add tigerlake and cooperlake.

gcc/testsuite/
* gcc.target/i386/funcspec-56.inc: Handle new march.
* g++.target/i386/mv16.C: Handle new march

libgcc/
* config/i386/cpuinfo.h: Add INTEL_COREI7_TIGERLAKE and
INTEL_COREI7_COOPERLAKE.

From-SVN: r274693

install.texi (Specific, alpha): Remove note to use binutils 2.11.2 or later.

* doc/install.texi (Specific, alpha): Remove note to use
binutils 2.11.2 or later.

From-SVN: r274692

re PR middle-end/89544 (Argument marshalling incorrectly assumes stack slots are naturally aligned.)

2019-08-20  Bernd Edlinger  <bernd.edlinger@hotmail.de>

        PR middle-end/89544
        * function.c (assign_parm_find_stack_rtl): Use larger alignment
        when possible.

testsuite:
2019-08-20  Bernd Edlinger  <bernd.edlinger@hotmail.de>

        PR middle-end/89544
        * gcc.target/arm/unaligned-argument-1.c: New test.
        * gcc.target/arm/unaligned-argument-2.c: New test.

From-SVN: r274691

Daily bump.

From-SVN: r274689

compiler: new debugging output methods/functions

    Add new hooks for dumping named objects, package bindings,
    and top level Gogo package list.

    Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/190877

From-SVN: r274682

runtime: be more strict in GC

    With CL 190599, along with what we do in greyobject, we ensure
    that we only mark allocated heap objects. As a result we can be
    more strict in GC:

    - Enable "sweep increased allocation count" check, which checks
      that the number of mark bits set are no more than the number of
      allocation bits.

    - Enable invalid pointer check on heap scan. We only trace
      allocated heap objects, which should not contain invalid
      pointer.

    This also makes the libgo runtime more convergent with the gc
    runtime.

    Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/190797

From-SVN: r274678

[AArch64] Use scvtf fbits option where appropriate

gcc/ChangeLog:
2019-08-19  Joel Hutton  <Joel.Hutton@arm.com>

* config/aarch64/aarch64-protos.h (aarch64_fpconst_pow2_recip): New prototype
* config/aarch64/aarch64.c (aarch64_fpconst_pow2_recip): New function
* config/aarch64/aarch64.md (*aarch64_<su_optab>cvtf<fcvt_target><GPF:mode>2_mult): New pattern
(*aarch64_<su_optab>cvtf<fcvt_iesize><GPF:mode>2_mult): New pattern
* config/aarch64/constraints.md (Dt): New constraint
* config/aarch64/predicates.md (aarch64_fpconst_pow2_recip): New predicate

gcc/testsuite/ChangeLog:
2019-08-19  Joel Hutton  <Joel.Hutton@arm.com>

* gcc.target/aarch64/fmul_scvtf_1.c: New test.

From-SVN: r274676

Add --with-static-standard-libraries to the top level

gdb should normally not be linked with -static-libstdc++.  Currently
this has not caused problems, but it's incompatible with catching an
exception thrown from a shared library -- and a subsequent patch
changes gdb to do just this.

This patch adds a new --with-static-standard-libraries flag to the
top-level configure.  It defaults to "auto", which means enabled if
gcc is being built, and disabled otherwise.

ChangeLog
2019-08-19  Tom Tromey  <tom@tromey.com>

* configure: Rebuild.
* configure.ac: Add --with-static-standard-libraries.

From-SVN: r274673

re PR tree-optimization/91403 (GCC fails with ICE.)

2019-08-19  Richard Biener  <rguenther@suse.de>

PR tree-optimization/91403
* tree-scalar-evolution.c (follow_ssa_edge_binary): Inline
cases we can handle with tail-recursion...
(follow_ssa_edge_expr): ... here.  Do so.

From-SVN: r274672

PR c++/91264 - detect modifying const objects in constexpr.

* constexpr.c (modifying_const_object_error): New function.
(cxx_eval_call_expression): Set TREE_READONLY on a CONSTRUCTOR of
a const-qualified object after it's been fully constructed.
(modifying_const_object_p): New function.
(cxx_eval_store_expression): Detect modifying a const object
during constant expression evaluation.
(cxx_eval_increment_expression): Use a better location when building
up the store.
(cxx_eval_constant_expression) <case DECL_EXPR>: Mark a constant
object's constructor TREE_READONLY.

* g++.dg/cpp1y/constexpr-tracking-const1.C: New test.
* g++.dg/cpp1y/constexpr-tracking-const2.C: New test.
* g++.dg/cpp1y/constexpr-tracking-const3.C: New test.
* g++.dg/cpp1y/constexpr-tracking-const4.C: New test.
* g++.dg/cpp1y/constexpr-tracking-const5.C: New test.
* g++.dg/cpp1y/constexpr-tracking-const6.C: New test.
* g++.dg/cpp1y/constexpr-tracking-const7.C: New test.
* g++.dg/cpp1y/constexpr-tracking-const8.C: New test.
* g++.dg/cpp1y/constexpr-tracking-const9.C: New test.
* g++.dg/cpp1y/constexpr-tracking-const10.C: New test.
* g++.dg/cpp1y/constexpr-tracking-const11.C: New test.
* g++.dg/cpp1y/constexpr-tracking-const12.C: New test.
* g++.dg/cpp1y/constexpr-tracking-const13.C: New test.
* g++.dg/cpp1y/constexpr-tracking-const14.C: New test.

From-SVN: r274671

Update BOZ constant documentation.

In the section "BOZ Literal constants" delete paragraph about integer
overload errors when initialising integer variables with BOZ constants
as these no longer occur.

From-SVN: r274667

[Ada] Fix documentation for stream oriented attributes

2019-08-19  Bob Duff  <duff@adacore.com>

gcc/ada/

* doc/gnat_rm/implementation_advice.rst: Fix documentation for
stream oriented attributes.
* gnat_rm.texi: Regenerate.

From-SVN: r274666

[Ada] Einfo: update comments for E_Function and E_Procedure

2019-08-19  Gary Dismukes  <dismukes@adacore.com>

gcc/ada/

* einfo.ads (E_Function, E_Procedure): Update comments to
reflect that Renamed_Entity is also used for nongeneric
subprograms.

From-SVN: r274665

[Ada] Fix bogus compilation error with Elaborate_Body and -gnatN

This fixes a bogus compilation error when a unit with SPARK_Mode
containing a pragma Elaborate_Body is with-ed by a generic unit
containing an inlined subprogram, and front-end inlining is enabled.

2019-08-19  Eric Botcazou  <ebotcazou@adacore.com>

gcc/ada/

* sem_prag.adb (Is_Before_First_Decl): Deal with rewritten
pragmas.

gcc/testsuite/

* gnat.dg/elab8.adb, gnat.dg/elab8_gen.adb,
gnat.dg/elab8_gen.ads, gnat.dg/elab8_pkg.adb,
gnat.dg/elab8_pkg.ads: New testcase.

From-SVN: r274664

[Ada] Suppress warnings on unreferenced parameters of dispatching ops

If the -gnatwf switch is used to activate warnings on unreferenced
formal parameters, the warning is no longer given if the subprogram is
dispatching, because such warnings tend to be noise. It is quite common
to have a parameter that is necessary just because the subprogram is
overriding, or just because we need a controlling parameter for the
dispatch.

2019-08-19  Bob Duff  <duff@adacore.com>

gcc/ada/

* sem_warn.adb (Warn_On_Unreferenced_Entity): Suppress warning
on formal parameters of dispatching operations.

gcc/testsuite/

* gnat.dg/warn29.adb, gnat.dg/warn29.ads: New testcase.

From-SVN: r274663

[Ada] Crash on object initialization that is call to expression function

This patch fixes a compiler abort on an object declaration for a
class-wide type whose expression is a call to an expression function
that returns type extension.

2019-08-19  Ed Schonberg  <schonberg@adacore.com>

gcc/ada/

* sem_res.adb (Resolve_Call): A call to an expression function
freezes when expander is active, unless the call appears within
the body of another expression function,

gcc/testsuite/

* gnat.dg/expr_func9.adb: New testcase.

From-SVN: r274662

[Ada] Conversion routines between GNAT.OS_Lib.OS_Time and long integer

The new routines convert back and forth between private type OS_Time and
a long integer which can be used in package Ada.Calendar.Conversions
routines to convert to Ada.Calendar.Time.

2019-08-19  Dmitriy Anisimkov  <anisimko@adacore.com>

gcc/ada/

* libgnat/s-os_lib.ads, libgnat/s-os_lib.adb (To_Ada, To_C): New
routines.

From-SVN: r274661

[Ada] Incorrect code for -gnateV switch

This patch corrects the code generated by the -gnateV switch in the case
of a private type whose full type is a modular type, removing spurious
run-time failures.

In addition, this corrects the initialization of exception occurrences
in exception handlers to avoid leaving data uninitialized, which caused
-gnateV to raise spurious errors.

2019-08-19  Bob Duff  <duff@adacore.com>

gcc/ada/

* exp_attr.adb (Attribute_Valid): Correct the handling of
private types where the full type is modular. System.Address is
an example. Otherwise, we convert uncheckedly to a signed type,
so we get an incorrect range 0 .. -1, for which all values will
fail.  The 'Valid attribute is illegal for such types, but we
generate such illegal attribute_references for 'Valid_Scalars,
and we generate 'Valid_Scalars when the -gnateV switch is used.
Rename Btyp --> PBtyp to avoid hiding the outer Btyp, which was
confusing.
* libgnat/a-except.adb: Set the Exception_Raised component.
Otherwise, we have incorrect reads of invalid data.

gcc/testsuite/

* gnat.dg/valid_scalars2.adb: New testcase.

From-SVN: r274660

[Ada] Import documentation from the RM for various runtime units

2019-08-19  Pierre-Marie de Rodat  <derodat@adacore.com>

gcc/ada/

* libgnat/a-cgaaso.ads, libgnat/a-cgarso.ads,
libgnat/a-cogeso.ads, libgnat/a-contai.ads,
libgnat/a-locale.ads: Import documentation from the RM.

From-SVN: r274659

[Ada] Generate ada_target_properties

Generate target-dependent info into a file named ada_target_properties.
This information is used by tools for static analysis: they need to know
the size of standard types for a given run-time library. This metadata
is meant to be saved at the root of the run-time directory.

2019-08-19  Jerome Guitton  <guitton@adacore.com>

gcc/ada/

* Makefile.rtl (system.o): New target to add generation of
target properties.
* gcc-interface/Makefile.in (install-gnatlib): Install
ada_target_properties.

From-SVN: r274658

[Ada] Lift restriction on instantiations that are compilation units

This change lifts the restriction that was still present in the new
on-demand instantiation scheme for the body of generics instantiated in
non-main units.

The instantiations that are compilation units were still dealt with in
the old-fashioned way, that is to say the decision of instantiating the
body was still made up front during the analysis of the instance
declaration, instead of being deferred until after a call to an inlined
subprogram is encountered.

This should save a few more cycles when full inlining across units is
enabled, but there should otherwise be no functional changes.

2019-08-19  Eric Botcazou  <ebotcazou@adacore.com>

gcc/ada/

* inline.adb (Add_Inlined_Body): Do not special-case instances
that are compilation units.
(Add_Pending_Instantiation): Likewise.
(Instantiate_Body): Skip instantiations that are compilation
units and have already been performed.
* sem_ch12.adb (Needs_Body_Instantiated): Do not special-case
instances that are compilation units.
(Load_Parent_Of_Generic): Be prepared for parent that is a
compilation unit but whose instantiation node has not been
replaced.

gcc/testsuite/

* gnat.dg/generic_inst12.adb, gnat.dg/generic_inst12_pkg1.adb,
gnat.dg/generic_inst12_pkg1.ads,
gnat.dg/generic_inst12_pkg2.ads: New testcase.

From-SVN: r274657

[Ada] Further cleanup in inlining machinery

This adds missing boilerplate stuff.  No functional changes.

2019-08-19  Eric Botcazou  <ebotcazou@adacore.com>

gcc/ada/

* inline.adb (Initialize, Lock): Deal with
Called_Pending_Instantiations.

From-SVN: r274656

[Ada] Legality of protected subp. implementing interface operations

This patch refines the predicate that implements rule in RM 9.4 (11.9/2)

Compiling b94.ads must yield:

   b94.ads:11:17: illegal overriding of subprogram inherited from interface
   b94.ads:11:17: first formal of "N" declared at line 8 must be of mode
     "out", "in out" or access-to-variable

----
package B94 is

   type Prot2_Int is protected interface;
   procedure  J (PI : in     Prot2_Int; N : in Integer)  is null;
   procedure  K (PI : in out Prot2_Int; N : in Integer)  is null;
   procedure  L (PI :    out Prot2_Int; N : in Integer)  is null;
   procedure  M (PI : access Prot2_Int; N : in Integer)  is null;
   procedure  N (PI : access constant Prot2_Int; N : in Integer)  is null;

   protected type Protected_2 is new Prot2_Int with
      procedure N (N : in Integer);                   -- ERROR: {7;1}
   end Protected_2;

end B94;

2019-08-19  Ed Schonberg  <schonberg@adacore.com>

gcc/ada/

* sem_ch6.adb (Check_Synchronized_Overriding): Complete
predicate that applies legality check in 9.4 (11.9/2): if an
inherited subprogram is implemented by a protected procedure or
entry, its first paarameter must be out, in_out or
access_to_varible.

From-SVN: r274655

[Ada] Buffer reading overflow in dispatch table initialization

For tagged types not defined at library level that derive from library
level tagged types the compiler may generate code to initialize their
dispatch table of predefined primitives copying from the parent type
data stored in memory after the dispatch table of the parent; that is,
at runtime the initialization of dispatch tables overflows reading the
parent dispatch table.

This problem does not affect the execution of the program since the
target dispatch table always has enough space to store the extra data,
and after such copy the compiler generates code to complete the
initialization of the dispatch table.

The following test must compile and execute without errors.

package pkg_a is
   type Root is tagged null record;
end pkg_a;

with pkg_a;
procedure main is
   type Derived is new pkg_a.Root with null record;  -- Test
begin
   null;
end main;

Command: gnatmake -q main -fsanitize=address; ./main

2019-08-19  Javier Miranda  <miranda@adacore.com>

gcc/ada/

PR ada/65696
* exp_atag.ads, exp_atag.adb (Build_Inherit_Predefined_Prims):
Adding formal to specify how many predefined primitives are
inherited from the parent type.
* exp_disp.adb (Number_Of_Predefined_Prims): New subprogram.
(Make_Secondary_DT): Compute the number of predefined primitives
of all tagged types (including tagged types not defined at
library level).  Previously we unconditionally relied on the
Max_Predef_Prims constant value when building the dispatch
tables of tagged types not defined at library level (thus
consuming more memory for their dispatch tables than required).
(Make_DT): Compute the number of predefined primitives that must
be inherited from their parent type when building the dispatch
tables of tagged types not defined at library level. Previously
we unconditionally relied on the Max_Predef_Prims constant value
when building the dispatch tables of tagged types not defined at
library level (thus copying more data than required from the
parent type).

From-SVN: r274654

[Ada] Process type extensions for -gnatw.h

This patch enables gap detection in type extensions.

With the -gnatw.h switch, on 64-bit machines,
the following test should get warnings:

gcc -c gaps.ads -gnatw.h
gaps.ads:16:07: warning: 48-bit gap before component "Comp2"
gaps.ads:17:07: warning: 8-bit gap before component "Comp3"

package Gaps is
   type Integer_16 is mod 2**16;

   type TestGap is tagged record
      Comp1 : Integer_16;
   end record;
   for TestGap use record
      Comp1 at 0 + 8 range 0..15;
   end record;

   type TestGap2 is new TestGap with record
      Comp2  : Integer_16;
      Comp3  : Integer_16;
   end record;
   for TestGap2 use record
      Comp2 at 08 + 8 range 0..15;
      Comp3 at 11 + 8 range 0..15;
   end record;

end Gaps;

2019-08-19  Bob Duff  <duff@adacore.com>

gcc/ada/

* sem_ch13.adb (Record_Hole_Check): Procedure to check for holes
that incudes processing type extensions. A type extension is
processed by first calling Record_Hole_Check recursively on the
parent type to compute the bit number after the last component
of the parent.

From-SVN: r274653

[Ada] Improve warnings about "too few elements" and "too many elements"

When warning about length-check failures detected at compile time that
are flagged with "too few elements" or "too many elements", the compiler
now gives an additional message indicating the number of elements
expected by the context versus how many are present in the conflicting
expression (such as an aggregate that has too few or too many
components).

The test below reports the following warnings when compiled with this command:

$ gcc -c -gnatj78 length_warnings.adb

length_warnings.adb:6:09: warning: too few elements for subtype of
                          "Boolean_Array" defined at line 5, expected 10
                          elements; found 9 elements, "Constraint_Error" will
                          be raised at run time
length_warnings.adb:10:09: warning: too few elements for subtype of
                           "Boolean_Array" defined at line 9, expected 2
                           elements; found 1 element, "Constraint_Error" will
                           be raised at run time
length_warnings.adb:14:09: warning: too many elements for subtype of
                           "Boolean_Array" defined at line 13, expected 10
                           elements; found 11 elements, "Constraint_Error"
                           will be raised at run time
length_warnings.adb:18:09: warning: too many elements for subtype of
                           "Boolean_Array" defined at line 17, expected 0
                           elements; found 1 element, "Constraint_Error" will
                           be raised at run time
length_warnings.adb:22:09: warning: too many elements for subtype of
                           "Boolean_Array" defined at line 21, expected 1
                           element; found 2 elements, "Constraint_Error" will
                           be raised at run time

procedure Length_Check_Warnings is

   type Boolean_Array is array (Natural range <>) of Boolean;

   Bits_A : Boolean_Array (1 .. 10)
     := (True, True, True, True, True, True, True, True, True);
   -- Too few elements

   Bits_B : Boolean_Array (1 .. 2)
     := (1 => False);
   -- Too few elements

   Bits_C : Boolean_Array (1 .. 10)
     := (True, True, True, True, True, True, True, True, True, True, True);
   -- Too many elements

   Bits_D : Boolean_Array (1 .. 0)
     := (1 => True);
   -- Too many elements

   Bits_E : Boolean_Array (1 .. 1)
     := (True, False);
   -- Too many elements

begin
   null;
end Length_Check_Warnings;

2019-08-19  Gary Dismukes  <dismukes@adacore.com>

gcc/ada/

* checks.adb (Length_Mismatch_Info_Message): New function in
Selected_Length_Checks to return a message indicating the
element counts for the mismatched lengths for a failed
compile-time length check.
(Plural_Or_Singular_Ending): Support function in
Length_Mismatch_Info_Message to return either "" or "s", for
concatenating to the end of words.
(Selected_Length_Checks): Pass the result of
Length_Mismatch_Info_Message as an extra warning message to
Compile_Time_Constraint_Error to indicate the mismatched lengths
for a failed compile-time length check.
* sem_util.ads (Compile_Time_Constraint_Error): Add an optional
message formal (Extra_Msg), defaulted to the empty string.
* sem_util.adb (Compile_Time_Constraint_Error): Output an extra
message following the main warning message (when Extra_Msg is
not the empty string).

From-SVN: r274652

[Ada] Enable use of GNAT.Sockets for VxWorks RTP

The recent introduction of GNAT.Sockets IPv6 support broke support for
VxWorks RTPs due to the use of internal VxWorks kernel calls. This patch
rectifies this by using the VxWorks public API for these routines.

The following RTP should compile successfully on a Development profile
VxWorks kernel that includes the INCLUDE_GETNAMEINFO component:

with GNAT.Sockets;      use GNAT.Sockets;

procedure IPvX is
   procedure Print_Address_Info
     (Host, Serv   : String;
      Family       : Family_Type := Family_Unspec)
   is
      Addresses : Address_Info_Array :=
        Get_Address_Info
          (Host, Serv, Family,
           Passive      => False,
           Numeric_Host => False);
   begin
      Sort (Addresses, IPv6_TCP_Preferred'Access);
   end Print_Address_Info;

begin
   Print_Address_Info ("localhost", "ssh");
end IPvX;

2019-08-19  Patrick Bernardi  <bernardi@adacore.com>

gcc/ada/

* socket.c: Removed the redefinition of getaddrinfo, getnameinfo
and freeaddrinfo to internal VxWorks kernel calls because they
are, well, internal kernel calls and cannot be called from RTPs.
VxWorks provides the necessary components to call these routines
directly.

From-SVN: r274651

[Ada] Fix incorrect stub generation for types in instances

This fixes a fallout of a recent change clearing the
Is_Generic_Actual_Type on the implicit full view of a private actual
type in an instance.  This flag is used to help disambiguating formal
types instantiated on the same actual type within an instance, but it
should be cleared outside the instance to let the usual disambiguation
rules apply again to these types outside the instance.

This in particular means that Exp_Dist cannot rely on it to detect
subtypes representing generic actual types, hence the need for the new
predicate.

2019-08-19  Eric Botcazou  <ebotcazou@adacore.com>

gcc/ada/

* exp_dist.adb (Is_Generic_Actual_Subtype): New predicate.
(Build_From_Any_Call, Build_To_Any_Call, Build_TypeCode_Call):
Use it instead of Is_Generic_Actual_Type flag to detect subtypes
representing generic actual types.

From-SVN: r274650

[Ada] Improve placement of warning on formals of generic subprograms

This patch modifies the handling of warnings on unused formal parameters
of generic subprograms. Previously such warnings were placed on the
formal appearing in the subprogram declaration, in contrast with
warnings on non-generic subprograms, where the warning is placed on the
corresponding entity in the body of the subprogram. This patch makes the
handling of both cases uniform. It is preferable to place the warning in
the body because this also provides a better suggestion for the
placement of an Unreferenced pragma to suppress the warning when desired.

2019-08-19  Ed Schonberg  <schonberg@adacore.com>

gcc/ada/

* sem_warn.adb (Check_References, Generic_Body_Formal): When a
formal parameter of a generic subprogram is not referenced in
the body, place the corresponding warning on the corresponding
entity in the specification of the generic body, as is done for
non-generic subprograms.

gcc/testsuite/

* gnat.dg/warn28.adb, gnat.dg/warn28.ads: New testcase.

From-SVN: r274649

[Ada] Factor out the "size for& too small..." error message

Use a constant for the Size_Too_Small_Message, so if it changes, it
won't change in one place but not another.  DRY. It might be better to
move this code out of errout.adb, but that's for another day.

2019-08-19  Bob Duff  <duff@adacore.com>

gcc/ada/

* errout.ads (Size_Too_Small_Message): New constant.
* errout.adb, freeze.adb, sem_ch13.adb: Use it.

From-SVN: r274648

[Ada] Fix internal error on subprogram instantiation with -gnatzc

This fixes a fallout of the recent change keeping the
Is_Generic_Instance flag on the wrapper package built for the
instantiation of a generic subprogram.

There is no need to visit the Instance_Spec of an
N_Subprogram_Instantiation node anymore because the regular processing
for an N_Package_Declaration node now does the job for instantiations of
generic subprograms.

The following subprogram must compile again quietly with -gnatzc:

with Gen_Proc;

package RCI is
   pragma Remote_Call_Interface;

   procedure Inst_Proc is new Gen_Proc;

   procedure P (S : String);
end RCI;

generic
procedure Gen_Proc (S : String);
pragma Remote_Call_Interface (Gen_Proc);

with Ada.Text_IO; use Ada.Text_IO;
procedure Gen_Proc (S : String) is
begin
   Put_Line ("Gen_Proc called: " & S);
end Gen_Proc;

2019-08-19  Eric Botcazou  <ebotcazou@adacore.com>

gcc/ada/

* exp_dist.adb (Build_Package_Stubs): Do not specifically visit
the declarations of an N_Subprogram_Instantiation node.

From-SVN: r274647

[Ada] Document missing gnatmetric switches

2019-08-19  Bob Duff  <duff@adacore.com>

gcc/ada/

* doc/gnat_ugn/gnat_utility_programs.rst: Document missing
metrics switches.

From-SVN: r274646

[Ada] Minor refactorings

2019-08-19  Piotr Trojanek  <trojanek@adacore.com>

gcc/ada/

* sem_ch12.adb (Get_Unit_Instantiation_Node): Simplify Nkind_In
membership test.
* sem.adb (Depends_On_Main): Whitespace cleanup; only assign a
local variable if needed.

From-SVN: r274645

[Ada] Allow reading a borrowed object inside a call to a pledge function

No impact on regular compilation.

2019-08-19  Claire Dross  <dross@adacore.com>

gcc/ada/

* sem_spark.ads, sem_spark.adb (Is_Pledge_Function): New
parameter of the generic. Function used to decide whether a
function is a pledge function.
(Check_Not_Borrowed): Disable check inside the second parameter
of a pledge function for the path borrowed by the first
parameter. Also disable checks for entities inside a Global
contract.

From-SVN: r274644

[Ada] Add formal function parameter equality to SPARK containers

This patch adds a formal function parameter "=" (L, R : Element_Type) to
SPARK containers. The equality that is used by default for Element_Type
after this patch is the primitive equality and not the predefined any
more. It also allows to use any function with the appropriate signature
for the equality function.

2019-08-19  Joffrey Huguet  <huguet@adacore.com>

gcc/ada/

* libgnat/a-cfdlli.ads, libgnat/a-cfhama.ads,
libgnat/a-cfinve.ads, libgnat/a-cforma.ads,
libgnat/a-cofove.ads, libgnat/a-cofuma.ads,
libgnat/a-cofuve.ads: Add formal function parameter "=" (L, R :
Element_Type) to the generic packages.

From-SVN: r274643

[Ada] Opt: clean up left-overs of earlier implementation in comment

2019-08-19  Eric Botcazou  <ebotcazou@adacore.com>

gcc/ada/

* opt.ads: Clean up left-overs of earlier implementation in
comment:

From-SVN: r274642

[Ada] Representation clause for derived enumeration type is mishandled

This patch fixes an old-standing problem with premature freezing. When a
derived type declaration includes a constraint, we generate a subtype
declaration of an anonymous base type, with the constraint given in the
original type declaration, Conceptually, the bounds are converted to the
new base type, and this conversion freezes (prematurely) that base type,
when the bounds are simply literals.  As a result, a representation
clause for the derived type is then rejected or ignared. This procedure
recognizes the simple case of literal bounds in derived enumeration type
declarations, which allows us to indicate that the conversions are not
freeze points, and the subsequent representation clause can be accepted.

2019-08-19  Ed Schonberg  <schonberg@adacore.com>

gcc/ada/

* sem_ch3.adb (Derived_Enumeration_Type): Do no freeze anonymous
base type if the bounds in the derived type declaration are
literals of the type.

gcc/testsuite/

* gnat.dg/rep_clause9.adb: New testcase.

From-SVN: r274641

[Ada] Do not skip non-aliasing checking when inlining in GNATprove

When code is inlinined for proof in the special mode for GNATprove, Ada
rules about non-aliasing should still be checked. Now fixed.

There is no impact on compilation.

2019-08-19  Yannick Moy  <moy@adacore.com>

gcc/ada/

* sem_res.adb (Resolve_Call): Check non-aliasing rules before
GNATprove inlining.

From-SVN: r274640

[Ada] Further cleanup in inlining machinery

This gets rid of a small issue in the inlining machinery: under very
peculiar circumstances, it would add a pending instantiation for the
body of a generic package at the point of call to an inlined subprogram
of the instance.  That's theoritically problematic because the saved
context is that of the call and not that of the instance in this case,
although the strict conditions ensure that this doesn't make a real
difference in practice.

Now that the machinery can perform the pending instantiations on demand,
we can optimistically add more of them when the instantiations are
analyzed and thus remove the problematic handling at the point of call.

No functional changes.

2019-08-19  Eric Botcazou  <ebotcazou@adacore.com>

gcc/ada/

* inline.adb (Add_Inlined_Body): Do not add pending
instantiations.
* sem_ch12.adb (Needs_Body_Instantiated): New predicate.
(Analyze_Package_Instantiation): Use it to decide whether to add
a pending instantiation for the body of the package.

From-SVN: r274639

[Ada] Fix thinko in Acc_Loop_to_gnu

This fixes a glitch introduced during the initial OpenACC work import
process, causing crashes on any Acc_Parallel + Acc_Loop combination.

2019-08-19  Olivier Hainque  <hainque@adacore.com>

gcc/ada/

* gcc-interface/trans.c (Acc_Loop_to_gnu): Return the openacc
BIND_EXPR node we have constructed on purpose.  Remove unused
variable.

gcc/testsuite/

* gnat.dg/openacc1.adb: New testcase.

From-SVN: r274638

[Ada] Define the -fdump-scos option in lang.opt

2019-08-19  Pierre-Marie de Rodat  <derodat@adacore.com>

gcc/ada/

* gcc-interface/lang.opt (fdump-scos): Define.
* gcc-interface/misc.c (gnat_handle_option): Handle
OPT_fdump_scos.

From-SVN: r274637

PR target/91441 - Turn off -fsanitize=kernel-address if TARGET_ASAN_SHADOW_OFFSET is not implemented.

 - -fsanitize=kernel-address will call targetm.asan_shadow_offset ()
   at asan_shadow_offset, so it will crash if TARGET_ASAN_SHADOW_OFFSET
   is not implemented, that's mean -fsanitize=kernel-address is not
   supported for target without TARGET_ASAN_SHADOW_OFFSET implementation.

gcc/ChangeLog:

PR target/91441
* toplev.c (process_options): Check TARGET_ASAN_SHADOW_OFFSET is
implemented for -fsanitize=kernel-address, and merge check logic
with -fsanitize=address.

testsuite/ChangeLog:

PR target/91441
* gcc.target/riscv/pr91441.c: New.

From-SVN: r274631

re PR fortran/91485 (Erroneous conflict between variable x and operator(.x.))

2019-08-18  Steven G. Kargl  <kargl@gcc.gnu.org>

PR fortran/91485
module.c (gfc_match_use): User defined operator cannot conflict with
a rename symbol.

2019-08-18  Steven G. Kargl  <kargl@gcc.gnu.org>

PR fortran/91485
* gfortran.dg/pr91485.f90: New test.

From-SVN: r274630

Daily bump.

From-SVN: r274629

[Darwin, fixincludes] Fix PR83531

There is no reasonable chance that the SDKs in question will be re-
issued, so the only viable solution is a fixincludes.

2019-08-18  C.G. Dogan <gcc+cgdogan.00@gmail.com>
    Iain Sandoe  <iain@sandoe.co.uk>

PR target/83531
* inclhack.def (darwin_api_availability): New, strip leading
underscores from API_XXXX defines.
* fixincl.x: Regenerate.
* tests/base/os/availability.h: New file.

Co-Authored-By: Iain Sandoe <iain@sandoe.co.uk>
From-SVN: r274624

[Darwin, PPC] Fix fail of cpp/assert4.c

This test needs the cpu and machine asserts to be implemented
which hadn't been done for PPC Darwin.  Fixed thus.

gcc/

2019-08-18  Iain Sandoe  <iain@sandoe.co.uk>

* config/rs6000/darwin.h (TARGET_OS_CPP_BUILTINS): Add asserts
for cpu and machine.  Factor 64/32b builtins.

From-SVN: r274623

install.texi (Specific, bfin): blackfin.uclinux.org is gone, point to sourceforge.net.

* doc/install.texi (Specific, bfin): blackfin.uclinux.org is
gone, point to sourceforge.net.

From-SVN: r274619

Daily bump.

From-SVN: r274618

compiler: support new numeric literal syntax

    Support 0b, 0o, and hex floats.

    Tested against test/literal2.go in the gc repo.

    Updates golang/go#12711
    Updates golang/go#19308
    Updates golang/go#28493
    Updates golang/go#29008

    Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/189718

From-SVN: r274614

compiler, runtime: allocate defer records on the stack

    When a defer is executed at most once in a function body,
    we can allocate the defer record for it on the stack instead
    of on the heap.

    This should make defers like this (which are very common) faster.

    This is a port of CL 171758 from the gc repo.

    Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/190410

From-SVN: r274613

re PR fortran/82992 (ICE in create_int_parameter_array, at fortran/module.c:6586)

2019-08-17  Steven G. Kargl  <kargl@gcc.gnu.org>

PR fortran/82992
* module.c (gfc_match_use):  When renaming a module entity, search
current namespace for conflicting symbol.

2019-08-17  Steven G. Kargl  <kargl@gcc.gnu.org>

PR fortran/82992
* gfortran.dg/pr71649.f90: Adjust error messages.
* gfortran.dg/use_15.f90: Ditto.
* gfortran.dg/use_rename_8.f90: Ditto.

From-SVN: r274608

re PR fortran/78739 (ICE in gfc_get_symbol_decl, at fortran/trans-decl.c:1477)

2019-08-17  Steven G. Kargl  <kargl@gcc.gnu.org>

PR fortran/78739
* match.c (gfc_match_st_function):  When matching a statement function,
need to check if the statement function name shadows the function
name.

2019-08-17  Steven G. Kargl  <kargl@gcc.gnu.org>

PR fortran/78739
* fortran.dg/pr78739.f90: New test.

From-SVN: r274605

re PR fortran/78719 ([F03] ICE in gfc_get_symbol_decl, at fortran/trans-decl.c:1438)

2019-08-17  Steven G. Kargl  <kargl@gcc.gnu.org>

PR fortran/78719
* decl.c (get_proc_name): Check for a CLASS entity when trying to
add attributes to an entity that already has an explicit interface.

2019-08-17  Steven G. Kargl  <kargl@gcc.gnu.org>

PR fortran/78719
* gfortran.dg/pr78719_1.f90: New test.
* gfortran.dg/pr78719_2.f90: Ditto.
* gfortran.dg/pr78719_3.f90: Ditto.

From-SVN: r274604

re PR fortran/91471 (f951: internal compiler error: gfc_variable_attr(): Bad array reference)

2019-08-17  Steven G. Kargl  <kargl@gcc.gnu.org>

PR fortran/91471
* primary.c (gfc_variable_attr): Remove a gfc_internal_error(),
which cannot be reached by conforming Fortran code, but seems to
be reachable from nonconforming Fortran code.  Treat the AR_UNKNOWN
case as a no-op.

2019-08-17  Steven G. Kargl  <kargl@gcc.gnu.org>

PR fortran/91471
* gfortran.dg/pr91471.f90: New test.

From-SVN: r274603

re PR libgomp/91473 (Test case libgomp.fortran/appendix-a/a.28.5.f90 is invalid)

2019-08-17  Thomas Koenig  <tkoenig@gcc.gnu.org>

    PR fortran/91473
    * testsuite/libgomp.fortran/appendix-a/a.28.5.f90: Add
    -std=legacy so invalid code in the test case is accepted.

From-SVN: r274602

* doc/ux.texi (User Experience Guidelines): Update reference.

From-SVN: r274601

gpl_v3.texi (Copying): Adjust the link to "Why not LGPL".

* doc/include/gpl_v3.texi (Copying): Adjust the link to "Why
not LGPL".

From-SVN: r274600

PR fortran/68401 Improve allocation error message

Improve the error message that is printed when a memory allocation
fails, by including the location, and the size of the allocation that
failed.

Regtested on x86_64-pc-linux-gnu.

gcc/fortran/ChangeLog:

2019-08-17  Janne Blomqvist  <jb@gcc.gnu.org>

PR fortran/68401
* trans-decl.c (gfc_build_builtin_function_decls): Replace
os_error with os_error_at decl.
* trans.c (trans_runtime_error_vararg): Modify so the error
function decl is passed directly.
(gfc_trans_runtime_error): Pass correct error function decl.
(gfc_trans_runtime_check): Likewise.
(trans_os_error_at): New function.
(gfc_call_malloc): Use trans_os_error_at.
(gfc_allocate_using_malloc): Likewise.
(gfc_call_realloc): Likewise.
* trans.h (gfor_fndecl_os_error): Replace with gfor_fndecl_os_error_at.

libgfortran/ChangeLog:

2019-08-17  Janne Blomqvist  <jb@gcc.gnu.org>

PR fortran/68401
* gfortran.map: Add GFORTRAN_10 node, add _gfortran_os_error_at
symbol.
* libgfortran.h (os_error_at): New prototype.
* runtime/error.c (os_error_at): New function.

From-SVN: r274599

runtime: scan write barrier buffer conservatively

    In gccgo, we insert the write barriers in the frontend, and so we
    cannot completely prevent write barriers on stack writes. So it
    is possible for a bad pointer appearing in the write barrier
    buffer. When flushing the write barrier, treat it the same as
    sacnning the stack. In particular, don't mark a pointer if it
    does not point to an allocated object. We already have similar
    logic in greyobject. With this, hopefully, we can prevent an
    unallocated object from being marked completely.

    Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/190599

From-SVN: r274598

Put the CL into the right dir.

From-SVN: r274596

Daily bump.

From-SVN: r274595

compiler: print runtime.hex in hex

    The gc compiler recognizes the type runtime.hex and prints values
    in this type as hex. Do the same here. This makes debugging
    runtime crashes slightly better.

    Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/190597

From-SVN: r274591

* gcc.target/sh/pr54236-6.c: Use -fno-tree-forwprop.

From-SVN: r274590

re PR c++/85827 (false positive for -Wunused-but-set-variable because of constexpr-if)

PR c++/85827
g++.dg/cpp1z/constexpr-if29.C: New test.

From-SVN: r274587

libsanitizer, record a local patch.

2019-08-16  Iain Sandoe  <iain@sandoe.co.uk>

* LOCAL_PATCHES: Add r274585.

From-SVN: r274586

libsanitize, asan - reapply r272406

The entry in LOCAL_PATCHES was accidentally omitted.

2019-08-16  Iain Sandoe  <iain@sandoe.co.uk>

* asan/asan_interceptors.h: Reapply r272406.

From-SVN: r274585

As discussed below:

  https://gcc.gnu.org/ml/gcc-patches/2019-08/msg00517.html

gcc/testsuite/ChangeLog:
* gcc.dg/struct-ret-1.c: Enable on all targets.

From-SVN: r274579

tree-sra.c (build_reconstructed_reference): Return NULL_TREE instead of NULL.

* tree-sra.c (build_reconstructed_reference): Return NULL_TREE instead
of NULL.  Add guard for broken VIEW_CONVERT_EXPRs.

From-SVN: r274576

tree.def (TYPE_SIZE): Clarify.

gcc/ChangeLog:

* tree.def (TYPE_SIZE): Clarify.
* tree.h (TYPE_SIZE, TYPE_SIZE_UNIT, DECL_SIZE): Add comments.

From-SVN: r274575

re PR testsuite/91458 (FAIL: g++.dg/tree-ssa/pr19807.C  -std=gnu++98  scan-tree-dump-times optimized "&MEM\\\\[\\\\(void .\\\\)&a \\\\+ 8B\\\\]" 3)

PR testsuite/91458

gcc/testsuite/ChangeLog:

* g++.dg/tree-ssa/pr19807.C: Use the same search pattern
unconditionally (correcting r272199, PR middle-end/90676).

From-SVN: r274574

re PR tree-optimization/91109 ([arm] gcc.c-torture/execute/20040709-1.c fails since r273135)

2019-08-16  Bernd Edlinger  <bernd.edlinger@hotmail.de>

        PR tree-optimization/91109
        * lra-int.h (lra_need_for_scratch_reg_p): Declare.
        * lra.c (lra): Use lra_need_for_scratch_reg_p.
        * lra-spills.c (lra_need_for_scratch_reg_p): New function.

From-SVN: r274573

mmx.md (mmxdoublemode): New mode attribute.

* config/i386/mmx.md (mmxdoublemode): New mode attribute.
(mmx_uavg<mode>3): Macroize expaner from mmx_uavgv8qi3 and
mmx_uavgv4hi3 using MMXMODE12 mode iterator.
(uavg<mode>3_ceil): New expander.
* config/i386/sse.md (uavg<mode>3_ceil): Use ssedoublemode
mode iterator when creating CONST1_RTX.
(<sse2_avx2>_uavg<mode>3<mask_name>): Ditto.
(*<sse2_avx2>_uavg<mode>3<mask_name>): Use ssedoublemode
mode iterator for const1_operand predicate.

From-SVN: r274572