i386: Emulate MMX mmx_pextrw with SSE

Emulate MMX mmx_pextrw with SSE.  Only SSE register source operand is
allowed.

PR target/89021
* config/i386/mmx.md (mmx_pextrw): Add SSE emulation.

From-SVN: r271229

i386: Emulate MMX sse_cvtpi2ps with SSE

Emulate MMX sse_cvtpi2ps with SSE2 cvtdq2ps, preserving upper 64 bits of
destination XMM register.  Only SSE register source operand is allowed.

PR target/89021
* config/i386/sse.md (sse_cvtpi2ps): Changed to
define_insn_and_split.  Also allow TARGET_MMX_WITH_SSE.  Add
SSE emulation.

From-SVN: r271228

i386: Emulate MMX sse_cvtps2pi/sse_cvttps2pi with SSE

Emulate MMX sse_cvtps2pi/sse_cvttps2pi with SSE.

PR target/89021
* config/i386/sse.md (sse_cvtps2pi): Add SSE emulation.
(sse_cvttps2pi): Likewise.

From-SVN: r271227

i386: Emulate MMX pshufw with SSE

Emulate MMX pshufw with SSE.  Only SSE register source operand is allowed.

PR target/89021
* config/i386/mmx.md (mmx_pshufw): Also check TARGET_MMX and
TARGET_MMX_WITH_SSE.
(mmx_pshufw_1): Add SSE emulation.
(*vec_dupv4hi): Changed to define_insn_and_split and also allow
TARGET_MMX_WITH_SSE to support SSE emulation.

From-SVN: r271226

i386: Emulate MMX vec_dupv2si with SSE

Emulate MMX vec_dupv2si with SSE.  Add the "Yw" constraint to allow
broadcast from integer register for AVX512BW with TARGET_AVX512VL.
Only SSE register source operand is allowed.

PR target/89021
* config/i386/constraints.md (Yw): New constraint.
* config/i386/mmx.md (*vec_dupv2si): Changed to
define_insn_and_split and also allow TARGET_MMX_WITH_SSE to
support SSE emulation.

From-SVN: r271225

i386: Emulate MMX mmx_eq/mmx_gt<mode>3 with SSE

Emulate MMX mmx_eq/mmx_gt<mode>3 with SSE.  Only SSE register source
operand is allowed.

PR target/89021
* config/i386/mmx.md (mmx_eq<mode>3): Also allow
TARGET_MMX_WITH_SSE.
(*mmx_eq<mode>3): Also allow TARGET_MMX_WITH_SSE.  Add SSE
support.
(mmx_gt<mode>3): Likewise.

From-SVN: r271224

i386: Emulate MMX mmx_andnot<mode>3 with SSE

Emulate MMX mmx_andnot<mode>3 with SSE.  Only SSE register source operand
is allowed.

PR target/89021
* config/i386/mmx.md (mmx_andnot<mode>3): Also allow
TARGET_MMX_WITH_SSE.  Add SSE support.

From-SVN: r271223

i386: Emulate MMX <any_logic><mode>3 with SSE

Emulate MMX <any_logic><mode>3 with SSE.  Only SSE register source
operand is allowed.

PR target/89021
* config/i386/mmx.md (any_logic:mmx_<code><mode>3): Also allow
TARGET_MMX_WITH_SSE.
(any_logic:<code><mode>3): New.
(any_logic:*mmx_<code><mode>3): Also allow TARGET_MMX_WITH_SSE.
Add SSE support.

From-SVN: r271222

i386: Emulate MMX ashr<mode>3/<shift_insn><mode>3 with SSE

Emulate MMX ashr<mode>3/<shift_insn><mode>3 with SSE.  Only SSE register
source operand is allowed.

PR target/89021
* config/i386/mmx.md (mmx_ashr<mode>3): Also allow
TARGET_MMX_WITH_SSE.  Add SSE emulation.
(mmx_<shift_insn><mode>3): Likewise.
(ashr<mode>3): New.
(<shift_insn><mode>3): Likewise.

From-SVN: r271221

i386: Emulate MMX mmx_pmaddwd with SSE

Emulate MMX pmaddwd with SSE.  Only SSE register source operand is
allowed.

PR target/89021
* config/i386/mmx.md (mmx_pmaddwd): Also allow TARGET_MMX_WITH_SSE.
(*mmx_pmaddwd): Also allow TARGET_MMX_WITH_SSE.  Add SSE support.

From-SVN: r271220

i386: Emulate MMX smulv4hi3_highpart with SSE

Emulate MMX mulv4hi3 with SSE.  Only SSE register source operand is
allowed.

PR target/89021
* config/i386/mmx.md (mmx_smulv4hi3_highpart): Also allow
TARGET_MMX_WITH_SSE.
(*mmx_smulv4hi3_highpart): Also allow TARGET_MMX_WITH_SSE. Add
SSE support.

From-SVN: r271219

i386: Emulate MMX mulv4hi3 with SSE

Emulate MMX mulv4hi3 with SSE.  Only SSE register source operand is
allowed.

PR target/89021
* config/i386/mmx.md (mmx_mulv4hi3): Also allow
TARGET_MMX_WITH_SSE.
(mulv4hi3): New.
(*mmx_mulv4hi3): Also allow TARGET_MMX_WITH_SSE.  Add SSE
support.

From-SVN: r271218

i386: Emulate MMX plusminus/sat_plusminus with SSE

Emulate MMX plusminus/sat_plusminus with SSE.  Only SSE register source
operand is allowed.

PR target/89021
* config/i386/mmx.md (MMXMODEI8): Require TARGET_SSE2 for V1DI.
(plusminus:mmx_<plusminus_insn><mode>3): Check
TARGET_MMX_WITH_SSE.
(sat_plusminus:mmx_<plusminus_insn><mode>3): Likewise.
(<plusminus_insn><mode>3): New.
(*mmx_<plusminus_insn><mode>3): Add SSE emulation.
(*mmx_<plusminus_insn><mode>3): Likewise.

From-SVN: r271217

i386: Emulate MMX punpcklXX/punpckhXX with SSE punpcklXX

Emulate MMX punpcklXX/punpckhXX with SSE punpcklXX.  For MMX punpckhXX,
move bits 64:127 to bits 0:63 in SSE register.  Only SSE register source
operand is allowed.

PR target/89021
* config/i386/i386-expand.c (ix86_split_mmx_punpck): New function.
* config/i386/i386-protos.h (ix86_split_mmx_punpck): New
prototype.
* config/i386/mmx.m (mmx_punpckhbw): Changed to
define_insn_and_split to support SSE emulation.
(mmx_punpcklbw): Likewise.
(mmx_punpckhwd): Likewise.
(mmx_punpcklwd): Likewise.
(mmx_punpckhdq): Likewise.
(mmx_punpckldq): Likewise.

From-SVN: r271216

i386: Emulate MMX packsswb/packssdw/packuswb with SSE2

Emulate MMX packsswb/packssdw/packuswb with SSE packsswb/packssdw/packuswb
plus moving bits 64:95 to bits 32:63 in SSE register.  Only SSE register
source operand is allowed.

PR target/89021
* config/i386/i386-expand.c (ix86_move_vector_high_sse_to_mmx):
New function.
(ix86_split_mmx_pack): Likewise.
* config/i386/i386-protos.h (ix86_move_vector_high_sse_to_mmx):
New prototype.
(ix86_split_mmx_pack): Likewise.
* config/i386/i386.md (mmx_isa): New.
(enabled): Also check mmx_isa.
* config/i386/mmx.md (any_s_truncate): New code iterator.
(s_trunsuffix): New code attr.
(mmx_packsswb): Removed.
(mmx_packssdw): Likewise.
(mmx_packuswb): Likewise.
(mmx_pack<s_trunsuffix>swb): New define_insn_and_split to emulate
MMX packsswb/packuswb with SSE2.
(mmx_packssdw): Likewise.
* config/i386/predicates.md (register_mmxmem_operand): New.

Co-Authored-By: Uros Bizjak <ubizjak@gmail.com>
From-SVN: r271215

i386: Allow MMX register modes in SSE registers

In 64-bit mode, SSE2 can be used to emulate MMX instructions without
3DNOW.  We can use SSE2 to support MMX register modes.

PR target/89021
* config/i386/i386-c.c (ix86_target_macros_internal): Define
__MMX_WITH_SSE__ for TARGET_MMX_WITH_SSE.
* config/i386/i386.c (ix86_set_reg_reg_cost): Add support for
TARGET_MMX_WITH_SSE with VALID_MMX_REG_MODE.
(ix86_vector_mode_supported_p): Likewise.
* config/i386/i386.h (TARGET_MMX_WITH_SSE): New.

From-SVN: r271213

lto-plugin, removed unused variable

2019-05-15  Iain Sandoe  <iain@sandoe.co.uk>

* lto-plugin.c (cleanup_handler): Remove unused var.

From-SVN: r271212

call.c (perform_overload_resolution, [...]): Use OVL_P; remove redundant TEMPLATE_DECL checks.

2019-05-15  Paolo Carlini  <paolo.carlini@oracle.com>

* call.c (perform_overload_resolution, build_new_method_call_1):
Use OVL_P; remove redundant TEMPLATE_DECL checks.
* decl.c (grokfndecl): Likewise.
* mangle.c (write_expression): Likewise.
* parser.c (cp_parser_template_id): Likewise.
* pt.c (resolve_overloaded_unification, type_dependent_expression_p):
Likewise.
* search.c (build_baselink): Likewise.
* tree.c (is_overloaded_fn, dependent_name, maybe_get_fns): Likewise.

From-SVN: r271211

Check for overflow in tree-switch-conversion (PR middle-end/90478).

2019-05-15  Martin Liska  <mliska@suse.cz>

PR middle-end/90478
* tree-switch-conversion.c (jump_table_cluster::can_be_handled):
Check for overflow.
2019-05-15  Martin Liska  <mliska@suse.cz>

PR middle-end/90478
* gcc.dg/tree-ssa/pr90478-2.c: New test.
* gcc.dg/tree-ssa/pr90478.c: New test.

From-SVN: r271210

tree-into-ssa.c (pass_build_ssa::execute): Run update_address_taken before going into SSA.

2019-05-15  Richard Biener  <rguenther@suse.de>

* tree-into-ssa.c (pass_build_ssa::execute): Run
update_address_taken before going into SSA.

From-SVN: r271209

gimple-parser.c (c_parser_gimple_postfix_expression): Handle __BIT_FIELD_REF.

2019-05-15  Richard Biener  <rguenther@suse.de>

c/
* gimple-parser.c (c_parser_gimple_postfix_expression): Handle
__BIT_FIELD_REF.

* tree-pretty-print.c (dump_generic_node): Dump BIT_FIELD_REF
as __BIT_FIELD_REF with type with -gimple.

* gcc.dg/gimplefe-40.c: Amend.

From-SVN: r271208

tree-ssa-uninit: clean up is_value_included_in

2019-05-15  Vladislav Ivanishin  <vlad@ispras.ru>

* tree-ssa-uninit.c (is_value_included_in): Remove is_unsigned and merge
semantically equivalent branches (left over after prior refactorings).

From-SVN: r271207

re PR tree-optimization/90474 (ICE: verify_gimple failed (error: DECL_GIMPLE_REG_P set on a variable with address taken; error: invalid address operand in MEM_REF))

2019-05-15  Richard Biener  <rguenther@suse.de>

PR c/90474
* c-common.c (c_common_mark_addressable_vec): Also mark
a COMPOUND_LITERAL_EXPR_DECL addressable similar to
c_mark_addressable.

From-SVN: r271206

darwin, testsuite, powerpc - handle tests for new processors.

If we build Darwin with a modern assembler, then it might well
recognise insns that cannot be used on current Darwin systems.

The patch augments the tests for feature support for VSX,
power8 and power9 to exclude Darwin even if the assembler can
handle the instructions.

2019-05-15  Iain Sandoe  <iain@sandoe.co.uk>

* lib/target-supports.exp
(check_effective_target_powerpc_p8vector_ok): No support for Darwin.
(check_effective_target_powerpc_p9vector_ok): Likewise.
(check_effective_target_powerpc_float128_sw_ok): Likewise.
(check_effective_target_powerpc_float128_hw_ok): Likewise.
(check_effective_target_powerpc_vsx_ok): Likewise.
* gcc.target/powerpc/bfp/bfp.exp: Don't try to run this for Darwin.
* gcc.target/powerpc/dfp/dfp.exp: Likewise.

From-SVN: r271205

re PR tree-optimization/88828 (Inefficient update of the first element of vector registers)

2019-05-15  Richard Biener  <rguenther@suse.de>

PR tree-optimization/88828
* tree-ssa-forwprop.c (simplify_vector_constructor): Fix
bogus check.

From-SVN: r271204

gimple-parser.c (c_parser_gimple_statement): Remove questionable auto-promotion to VIEW_CONVERT_EXPR.

2019-05-14  Richard Biener  <rguenther@suse.de>

* gimple-parser.c (c_parser_gimple_statement): Remove
questionable auto-promotion to VIEW_CONVERT_EXPR.
(c_parser_gimple_typespec): Split out from __MEM parsing.
(c_parser_gimple_postfix_expression): Handle __VIEW_CONVERT.
* tree-pretty-print.c (dump_generic_node): Dump VIEW_CONVERT_EXPR
as __VIEW_CONVERT with -gimple.

* gcc.dg/gimplefe-40.c: New testcase.

From-SVN: r271203

lto-plugin - support -save-temps, -v, --version.

This patch makes the lto-plugin follow the same approach
to save-temps as collect2.

-save-temps causes the temp file to be named meaningfully,
and for the relevant input files to be saved in CWD.

-v, —version causes the save actions to be output to stderr.

one can get this to happen by just putting -save-temps, -v on
the regular link line or (for compatibility with the way the
 -debug flag works) by appending -plugin-opt=-save-temps, etc.

lto-plugin/

2019-05-15  Iain Sandoe  <iain@sandoe.co.uk>

* lto-plugin.c (exec_lto_wrapper): Make the wrapper
arguments filename more user-friendly.
(file_exists, maybe_unlink): New.
(cleanup_handler): Use maybe unlink to handle the
case when temps should be saved.
(process_option): Look for -v, —-version, -save-temps.
(onload): Record the linker output file name.
Check for -v, —-version, -save-temps in the GCC collect
options environment.

From-SVN: r271202

add missing Changelog for last commit.

From-SVN: r271201

darwin, testsuite, ppc FIX PR87600

The test fails on PPC Darwin because we emit
__POWERPC__ instead of __powerpc__ fixed by allowing
for both.

2019-05-15  Iain Sandoe  <iain@sandoe.co.uk>

* gcc.dg/pr87600.h: Add __POWERPC__ as an alternate test
for PowerPC platforms.

From-SVN: r271200

darwin, testsuite, laste piece to fix PR82920

These ae test adjustments to the scan assembler strings
mostly just to catch missing __USER_LABEL_PREFIX__s  on
symbols.

2019-05-15  Iain Sandoe  <iain@sandoe.co.uk>

PR target/82920
* g++.dg/cet-notrack-1.C: Adjust scan assembler for Darwin.
* gcc.target/i386/cet-notrack-5a.c: Likewise.
* gcc.target/i386/cet-notrack-5b.c: Likewise.
* gcc.target/i386/cet-notrack-6b.c: Likewise.
* gcc.target/i386/cet-notrack-icf-1.c: Likewise.
* gcc.target/i386/cet-notrack-icf-2.c: Likewise.
* gcc.target/i386/cet-notrack-icf-3.c: Likewise.
* gcc.target/i386/cet-notrack-icf-4.c: Likewise.
* gcc.target/i386/cet-sjlj-3.c: Likewise.
* gcc.target/i386/cet-sjlj-5.c: Likewise.

From-SVN: r271199

Daily bump.

From-SVN: r271197

re PR c++/68918 (spurious "invalid use of incomplete type" in trailing return type)

PR c++/68918
* g++.dg/cpp0x/decltype71.C: New test.

From-SVN: r271193

re PR c++/70156 (incorrect "incomplete type" error initializing a static const data member)

PR c++/70156
* g++.dg/init/static5.C: New test.

From-SVN: r271192

darwin, testsuite, fix more PR 82920

Darwin doesn't support mx32, and some tests were
failing because it was trying to do them.  When we
disable this it turns out that quite a few tests
requiring mx32 support were not guarded.

gcc/

2019-05-14  Iain Sandoe  <iain@sandoe.co.uk>

PR target/82920
* config/i386/darwin.h (CC1_SPEC): Report -mx32 as an error for
Darwin.

gcc/testsuite/

2019-05-14  Iain Sandoe  <iain@sandoe.co.uk>

PR target/82920
* gcc.target/i386/cet-sjlj-6b.c: Require effective target x32.
* gcc.target/i386/pr52146.c: Likewise.
* gcc.target/i386/pr52698.c: Likewise.
* gcc.target/i386/pr52857-1.c: Likewise.
* gcc.target/i386/pr52857-2.c: Likewise.
* gcc.target/i386/pr52876.c: Likewise.
* gcc.target/i386/pr53698.c: Likewise.
* gcc.target/i386/pr54157.c: Likewise.
* gcc.target/i386/pr55049-1.c: Likewise.
* gcc.target/i386/pr55093.c: Likewise.
* gcc.target/i386/pr55116-1.c: Likewise.
* gcc.target/i386/pr55116-2.c: Likewise.
* gcc.target/i386/pr55597.c: Likewise.
* gcc.target/i386/pr59929.c: Likewise.
* gcc.target/i386/pr66470.c: Likewise.

From-SVN: r271190

Fix NullablePointer test utility

* testsuite/util/testsuite_allocator.h (NullablePointer::operator bool):
Fix return value.

From-SVN: r271189

rs6000: Make eh_set_lr_<mode> a define_insn_and_split

* config/rs6000/rs6000.md (eh_set_lr_<mode>): Merge with following
define_split to become a define_insn_and_split.

From-SVN: r271185

rs6000: New enum epilogue_type

We currently call rs6000_emit_epilogue with a boolean parameter saying
if this is for a sibcall.  We also need to create epilogues for
eh_return.  This isn't yet indicated directly: instead, we get an
eh_return epilogue if crtl->calls_eh_return and this is not a sibcall.

This patch changes things so there is a three-way enum argument.

What is called "normal" now can still actually be "eh_return".  The
rs6000_emit_epilogue function still uses an "int sibcall" variable
internally.

* config/rs6000/rs6000-protos.h (rs6000_emit_epilogue): Change
arguments.
* config/rs6000/rs6000.c (rs6000_emit_epilogue): Change arguments.
* config/rs6000/rs6000.md (epilogue_type): New define_enum.
(sibcall_epilogue): Adjust.
(epilogue): Adjust.

From-SVN: r271184

Remove obsolete Solaris 10 support

libstdc++-v3:
* config/os/solaris/solaris2.10: Move to ...
* config/os/solaris: ... this.
* configure.host (os_include_dir): Adapt.
(abi_baseline_pair): Remove Solaris 10 handling.
* config/abi/post/i386-solaris2.10: Remove.
* config/abi/post/sparc-solaris2.10: Remove.
* config/abi/post/i386-solaris2.11: Rename to ...
* config/abi/post/i386-solaris: ... this.
* config/abi/post/sparc-solaris2.11: Rename to ...
* config/abi/post/sparc-solaris: ... this.

* libsupc++/new_opa.cc [_GLIBCXX_HAVE_MEMALIGN] [__sun]: Remove
workaround.

* testsuite/ext/enc_filebuf/char/13598.cc: Remove *-*-solaris2.10
xfail.

libsanitizer:
* configure.ac (have_dl_iterate_phdr): Remove *-*-solaris2.10*
handling.
* configure: Regenerate.

libgcc:
* config.host: Simplify various *-*-solaris2.1[0-9]* to
*-*-solaris2*.
* configure.ac: Likewise.
* configure: Regenerate.

* config/i386/sol2-unwind.h (x86_fallback_frame_state): Remove
Solaris 10 and Solaris 11 < snv_125 handling.

libbacktrace:
* configure.ac (have_dl_iterate_phdr): Remove *-*-solaris2.10*
handling.
* configure: Regenerate.

gcc/testsuite:
* gcc.dg/atomic/c11-atomic-exec-4.c: Simplify triplet to
*-*-solaris2*.
* gcc.dg/atomic/c11-atomic-exec-5.c: Likewise.
* gcc.dg/c99-math-double-1.c: Likewise.
* gcc.dg/c99-math-float-1.c: Likewise.
* gcc.dg/c99-math-long-double-1.c: Likewise.
* gcc.misc-tests/linkage.exp: Simplify triplet to
x86_64-*-solaris2*.

* gcc.target/i386/mcount_pic.c: Remove *-*-solaris2.10* && !gld
xfail.
* gcc.target/i386/pr63620.c: Likewise.

* lib/target-supports.exp (check_sse_os_support_available): Remove
Solaris 9/x86 workaround.

gcc:
* config.gcc: Move *-*-solaris2.10* from obsolete configurations
to unsupported ones.
Simplify x86_64-*-solaris2.1[0-9]* to x86_64-*-solaris2*.
* config.host: Likewise.
* config/i386/sol2.h (ASM_COMMENT_START): Remove.
* config/sparc/driver-sparc.c (host_detect_local_cpu) [__sun__ &&
__svr4__]: Remove "brand" fallback.
[!KSTAT_DATA_STRING]: Remove.
* configure.ac (gcc_cv_ld_hidden): Simplify *-*-solaris2.1[0-9]*
to *-*-solaris2*.
(comdat_group): Likewise.
(set_have_as_tls): Likewise.
(gcc_cv_target_dl_iterate_phdr): Likewise.
(gcc_cv_as_shf_merge): Remove Solaris 10/x86 workaround.
(gcc_cv_ld_aligned_shf_merge): Remove Solaris 10/SPARC workaround.
* configure: Regenerate.
* doc/install.texi: Simplify Solaris target triplets.
(Specific, i?86-*-solaris2*): Remove Solaris 10 references.
(Specific, *-*-solaris2*): Document Solaris 10 removal.
Remove Solaris 10 references.
Remove obsolete Solaris bug reference.
(Specific, sparc-sun-solaris2.10): Remove.

From-SVN: r271183

Add __raw_visit and __raw_idx_visit, use INVOKE<R>

This change simplifies visitation for variants, by using INVOKE<R> for
the visit<R> form, and explicitly specifying the tag types for raw
visitation, instead of inferring them from the return types of the
lambda functions used as visitors.

* include/std/variant (__visit_with_index): Remove typedef.
(__deduce_visit_result): New tag type.
(__raw_visit, __raw_idx_visit): New helper functions for "raw"
visitation of possibly-valueless variants, forwarding to __do_visit
with the relevant tag type.
(_Variant_storage<false, _Types...>::_M_reset_impl): Use __raw_visit
and make lambda return void.
(__variant_construct): Likewise.
(_Copy_assign_base::operator=, _Move_assign_base::operator=): Use
__raw_idx_visit and make lambda return void.
(_Multi_array::__untag_result): Add metafunction to check the function
pointer type for a tag type that dictates the kind of visitation.
(_Multi_array<_Ret(*)(_Visitor, _Variants...), __first, __rest...>):
Use decltype(auto) instead of tagged function pointer type.
(__gen_vtable_impl): Remove bool non-type parameter and unused
_Variant_tuple parameter.
(__gen_vtable_impl::__visit_invoke_impl): Remove.
(__gen_vtable_impl::__do_visit_invoke): Remove.
(__gen_vtable_impl::__do_visit_invoke_r): Remove.
(__gen_vtable_impl::__visit_invoke): Use if-constexpr and __invoke_r
for the visit<R> case, rather than dispatching to separate functions.
(_VARIANT_RELATION_FUNCTION_TEMPLATE): Use __raw_idx_visit and make
lambda return void.
(variant::swap): Likewise.
(__do_visit): Replace two non-type template parameters with a single
type parameter, so that the caller must specify the visitor's return
type (or one of the tag types).
(visit): Deduce a return type from the visitor and use the
__deduce_visit_result tag to enforce that all overloads return the
same type.
(visit<R>): Call __do_visit<R> with explicit result type.
(__variant_hash_call_base_impl::operator()): Use __raw_visit and make
lambda return void.

From-SVN: r271182

i386.md (any_div): New code iterator.

* config/i386/i386.md (any_div): New code iterator.
(paired_mod): New code attribute.
(sgnprefix): Handle DIV and UDIV RTXes.
(u): Ditto.
(<u>divmod<mode>4): Macroize expander from divmod<mode>4
and udivmod<mode>4 patterns using any_div code iterator.
(divmod splitters): Macroize splitters using any_div code iterator.
(*udivmodsi4_pow2_zext_1): Use exactl_log2 in insn condition.
(*udivmodsi4_pow2_zext_2): Ditto.
(*<u>divmod<mode>4_noext): Macroize insn from *divmod<mode>4_noext
and *udivmod<mode>4_noext patterns using any_div code iterator.
(*<u>divmod<mode>4_noext_zext_1): Macroize insn from
*divmod<mode>4_noext_zext_1 and *udivmod<mode>4_noext_zext_1
patterns using any_div code iterator.
(*<u>divmod<mode>4_noext_zext_2): Macroize insn from
*divmod<mode>4_noext_zext_2 and *udivmod<mode>4_noext_zext_2
patterns using any_div code iterator.
(<u>divmodhiqi3): Macroize insn from divmodhiqi3 and
udivmodhiqi3 patterns using any_extend code iterator.

From-SVN: r271179

nonesuch is insufficiently useless (lwg2996)

2019-05-14  Nina Dinka Ranns  <dinka.ranns@gmail.com>

nonesuch is insufficiently useless (lwg2996)
* include/std/type_traits (struct __nonesuch): Added private base
class to make __nonesuch not an aggregate and removed deleted default
constructor.
* include/bits/stl_pair.h (struct __nonesuch_no_braces): Removed.
(operator=(const pair&)): Use __nonesuch instead of
__nonesuch_no_braces.
(operator=(pair&&)): Likewise
* include/std/tuple (operator=(const tuple&)): Use __nonesuch instead
of __nonesuch_no_braces.
(operator=(tuple&&)): Likewise
* include/experimental/type_traits (struct nonesuch): Added private
base class to make nonesuch not an aggregate and removed deleted
default constructor.
* testsuite/20_util/nonesuch/nonesuch.cc: New.
* testsuite/experimental/type_traits/nonesuch.cc: New.

From-SVN: r271175

Use INVOKE<R> in std::function, std::bind and std::packaged_task

As well as simpifying the code by removing duplication, this means that
we only need to touch std::__invoke_r if we need to implement changes to
INVOKE<R>, such as those in P0932R0.

* include/bits/std_function.h (_Simple_type_wrapper): Remove.
(_Function_handler): Remove partial specializations for void return
types and pointers to member.
(_Function_handler::_M_manager): Adapt to removal of
_Simple_type_wrapper.
(_Function_handler::_M_invoke): Use __invoke_r instead of __invoke.
* include/std/functional (_Bind_result::__enable_if_void)
(_Bind_result::__disable_if_void): Remove sfinae helpers.
(_Bind_result::__call): Use __invoke_r and remove overloads for void
return types.
* include/std/future (__future_base::_Task_state::_M_run)
(__future_base::_Task_state::_M_run_delayed): Use __invoke_r and
change return type of lambda expressions.

From-SVN: r271174

Define std::__invoke_r for INVOKE<R>

* include/bits/invoke.h (__invoke_r): Define new function implementing
the INVOKE<R> pseudo-function.
* testsuite/20_util/function_objects/invoke/1.cc: Add more tests.
* testsuite/20_util/function_objects/invoke/2.cc: New test.

From-SVN: r271173

libgo: reduce overhead for memory/block/mutex profiling

    Revise the gccgo version of memory/block/mutex profiling to reduce
    runtime overhead. The main change is to collect raw stack traces while
    the profile is on line, then post-process the stacks just prior to the
    point where we are ready to use the final product. Memory profiling
    (at a very low sampling rate) is enabled by default, and the overhead
    of the symbolization / DWARF-reading from backtrace_full was slowing
    things down relative to the main Go runtime.

    Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/171497

From-SVN: r271172

Add __is_nothrow_convertible to fix std::is_nothrow_invocable_r

The definition of is_nothrow_invocable in terms of is_convertible and
is_nothrow_constructible is incorrect, because a type could have an
explicit constructor that means is_nothrow_constructible is true, but
implicit conversions could use a different constructor that is
potentially-throwing.

Fix it by adding a C++11 version of C++20's is_nothrow_convertible that
only considers implicit conversions.

* include/std/type_traits (__is_nt_convertible_helper): Define it
unconditionally, not only for C++20.
(__is_nothrow_convertible): Define internal trait for use in C++11.
(__is_nt_invocable_impl: Fix by using __is_nothrow_convertible.
(is_invocable_r_v, is_nothrow_invocable_r_v): Add missing parameter.
* testsuite/20_util/is_nothrow_convertible/value_ext.cc: New test.
* testsuite/20_util/is_nothrow_convertible/value.cc: Check with type
that has nothrow explicit conversion but potentially-throwing implicit
conversion.
* testsuite/20_util/is_nothrow_invocable/value.cc: Likewise.
* testsuite/20_util/is_nothrow_invocable/value_ext.cc: Fix helper
function to only consider implicit conversions.
* testsuite/20_util/tuple/cons/noexcept_specs.cc: Add comment.

From-SVN: r271171

gimple-parser.c (c_parser_gimple_statement): Remove questionable auto-promotion to VIEW_CONVERT_EXPR.

2019-05-14  Richard Biener  <rguenther@suse.de>

* gimple-parser.c (c_parser_gimple_statement): Remove
questionable auto-promotion to VIEW_CONVERT_EXPR.
(c_parser_gimple_typespec): Split out from __MEM parsing.
(c_parser_gimple_postfix_expression): Handle __VIEW_CONVERT.
* tree-pretty-print.c (dump_generic_node): Dump VIEW_CONVERT_EXPR
as __VIEW_CONVERT with -gimple.

* gcc.dg/gimplefe-40.c: New testcase.

From-SVN: r271170

Reduce header dependencies in <iterator>

* include/std/iterator: Include <iosfwd> instead of <istream> and
<ostream>.

From-SVN: r271169

Removing unused, non-standard function in _Rb_tree

* include/bits/stl_tree.h (_Rb_tree::erase(const Key*, const Key*)):
Remove unused, non-standard function.

From-SVN: r271168

Make std::match_results::_M_resize more useful

As both callers of match_results::_M_resize(unsigned) immediately follow
it with a loop to update the value of each sub_match, that behaviour can
be moved into _M_resize itself. The first caller fills the container
with unmatched subs, which can be done with vector::assign, and the
second caller clears the container to establish a specific state, which
can be provided by a new member function specific to that purpose.

Tangentially, I also noticed that match_results::max_size() doesn't
account for the three special sub_match objects that are always present
in a fully established result state. This patch also fixes that.

* include/bits/regex.h (match_results::max_size()): Adjust return
value to account for prefix/suffix/unmatched subs.
(match_results::_M_resize(unsigned int)): Use _Base_type::assign to
reset the contained sub matches.
(match_results::_M_establish_failed_match(_Bi_iter)): Add new member
function to set result state following a failed match.
* include/bits/regex.tcc (__regex_algo_impl): Remove loop to set
sub_match states after _M_resize. Use _M_establish_failed_match.

From-SVN: r271167

PR libstdc++/69724 avoid temporary in std::thread construction

The std::thread constructor creates (and then moves) an unnecessary
temporary copy of each argument. Optimize it to only make the one copy
that is required.

PR libstdc++/69724
* include/std/thread (thread::_State_impl, thread::_S_make_state):
Replace single _Callable parameter with variadic _Args pack, to
forward them directly to the tuple of decayed copies.
* testsuite/30_threads/thread/cons/69724.cc: New test.

From-SVN: r271166

Inconsistency wrt Allocators in basic_string assignment (LWG2579)

2019-05-14  Nina Dinka Ranns  <dinka.ranns@gmail.com>

Inconsistency wrt Allocators in basic_string assignment (LWG2579)
* include/bits/basic_string.h: (operator=(const basic_string&):
Move allocator decision to assign.
(assign(const basic_string&)): Move allocator decision here.
* testsuite/21_strings/basic_string/allocator/char/copy_assign.cc:
Add tests.
* testsuite/21_strings/basic_string/allocator/wchar_t/copy_assign.cc:
Add tests.

From-SVN: r271165

Reapply r270597.

2019-05-14  Paolo Carlini  <paolo.carlini@oracle.com>

PR preprocessor/90382
* decl.c (grokdeclarator): Fix value assigned to typespec_loc, use
min_location.
2019-05-14  Paolo Carlini  <paolo.carlini@oracle.com>

PR preprocessor/90382
* g++.dg/diagnostic/trailing1.C: New test.

From-SVN: r271164

Fix min_location usage in line-map.c (PR preprocessor/90382).

2019-05-14  Martin Liska  <mliska@suse.cz>

PR preprocessor/90382
* line-map.c (first_map_in_common_1): Handle ADHOC
locations.

From-SVN: r271163

Do a refactoring in linemap (PR preprocessor/90382).

2019-05-14  Martin Liska  <mliska@suse.cz>

PR preprocessor/90382
* include/line-map.h (get_data_from_adhoc_loc): Add const to
the first argument.
(get_location_from_adhoc_loc): Likewise.
* line-map.c(get_data_from_adhoc_loc):  Add const to
the first argument.
(get_location_from_adhoc_loc): Likewise.
(get_combined_adhoc_loc): Use get_location_from_adhoc_loc
(or get_data_from_adhoc_loc).
(get_range_from_adhoc_loc): Likewise.
(get_pure_location): Likewise.
(linemap_position_for_loc_and_offset): Likewise.
(linemap_lookup): Likewise.
(linemap_ordinary_map_lookup): Likewise.
(linemap_macro_map_lookup): Likewise.
(linemap_get_expansion_line): Likewise.
(linemap_get_expansion_filename): Likewise.
(linemap_location_in_system_header_p): Likewise.
(linemap_location_from_macro_expansion_p): Likewise.
(linemap_macro_loc_to_exp_point): Likewise.
(linemap_resolve_location): Likewise.
(linemap_unwind_toward_expansion): Likewise.
(linemap_unwind_to_first_non_reserved_loc): Likewise.
(linemap_expand_location): Likewise.
(linemap_dump_location): Likewise.

From-SVN: r271162

Fix indentation in testsuite utility header

* testsuite/util/testsuite_allocator.h (memory_resource)
(default_resource_mgr): Fix indentation.

From-SVN: r271161

Add __gnu_test::NullablePointer utility to testsuite

* testsuite/20_util/allocator_traits/members/allocate_hint_nonpod.cc:
Use operator-> to access raw pointer member.
* testsuite/23_containers/vector/59829.cc: Likewise.
* testsuite/23_containers/vector/bool/80893.cc: Likewise.
* testsuite/libstdc++-prettyprinters/cxx11.cc: Use NullablePointer.
* testsuite/util/testsuite_allocator.h (NullablePointer): New utility
for tests.
(PointerBase, PointerBase_void): Derive from NullablePointer and use
its constructors and equality operators. Change converting
constructors to use operator-> to access private member of the other
pointer type.
(PointerBase_void::operator->()): Add, for access to private member.
(operator-(PointerBase, PointerBase)): Change to hidden friend.
(operator==(PointerBase, PointerBase)): Remove.
(operator!=(PointerBase, PointerBase)): Remove.

From-SVN: r271160

Fix unique_ptr pretty printer for empty classes

The printer was confused when unique_ptr<T,D>::pointer is an empty
class, or the deleter is not empty. Instead of assuming the tuple has a
single _M_head_impl member manually inspect the tuple base classes to
get the first element.

* python/libstdcxx/v6/printers.py (UniquePointerPrinter.__init__): Do
not assume field called _M_head_impl is the first tuple element.
* testsuite/libstdc++-prettyprinters/compat.cc: Make tuple
implementation more accurate.
* testsuite/libstdc++-prettyprinters/cxx11.cc: Check unique_ptr with
empty pointer type and non-empty deleter.

From-SVN: r271159

LWG 2899 - Make is_move_constructible correct for unique_ptr

* include/bits/unique_ptr.h (__uniq_ptr_impl): Add move constructor,
move assignment operator.
(__uniq_ptr_impl::release(), __uniq_ptr_impl::reset(pointer)): Add.
(__uniq_ptr_data): New class template with conditionally deleted
special members.
(unique_ptr, unique_ptr<T[], D>): Change type of data member from
__uniq_ptr_impl<T, D> to __uniq_ptr_data<T, D>. Define move
constructor and move assignment operator as defaulted.
(unique_ptr::release(), unique_ptr<T[], D>::release()): Forward to
__uniq_ptr_impl::release().
(unique_ptr::reset(pointer), unique_ptr<T[], D>::reset<U>(U)): Forward
to __uniq_ptr_impl::reset(pointer).
* python/libstdcxx/v6/printers.py (UniquePointerPrinter.__init__):
Check for new __uniq_ptr_data type.
* testsuite/20_util/unique_ptr/dr2899.cc: New test.

From-SVN: r271158

Fix a test-case in PR middle-end/90340.

2019-05-14  marxin  <mliska@suse.cz>

PR middle-end/90340
* gcc.dg/tree-ssa/pr90340-2.c: Add case-values-threshold
param.

From-SVN: r271156

re PR tree-optimization/88828 (Inefficient update of the first element of vector registers)

2019-05-14  Richard Biener  <rguenther@suse.de>
H.J. Lu  <hongjiu.lu@intel.com>

PR tree-optimization/88828
* tree-ssa-forwprop.c (simplify_vector_constructor): Handle
permuting in a single non-constant element not extracted
from a vector.

* gcc.target/i386/pr88828-1.c: New test.
* gcc.target/i386/pr88828-1a.c: Likewise.
* gcc.target/i386/pr88828-1b.c: Likewise.
* gcc.target/i386/pr88828-1c.c: Likewise.
* gcc.target/i386/pr88828-4a.c: Likewise.
* gcc.target/i386/pr88828-4b.c: Likewise.
* gcc.target/i386/pr88828-5a.c: Likewise.
* gcc.target/i386/pr88828-5b.c: Likewise.
* gcc.target/i386/pr88828-7.c: Likewise.
* gcc.target/i386/pr88828-7a.c: Likewise.
* gcc.target/i386/pr88828-7b.c: Likewise.
* gcc.target/i386/pr88828-8.c: Likewise.
* gcc.target/i386/pr88828-8a.c: Likewise.
* gcc.target/i386/pr88828-8b.c: Likewise.
* gcc.target/i386/pr88828-9.c: Likewise.
* gcc.target/i386/pr88828-9a.c: Likewise.
* gcc.target/i386/pr88828-9b.c: Likewise.

Co-Authored-By: H.J. Lu <hongjiu.lu@intel.com>
From-SVN: r271153

2019-05-14  Przemyslaw Wirkus  <przemyslaw.wirkus@arm.com\>

gcc/
* internal-fn.def (SIGNBIT): New.
* config/aarch64/aarch64-simd.md (signbitv2sf2): New expand
defined.
(signbitv4sf2): Likewise.

gcc/testsuite/
* gcc.target/aarch64/signbitv4sf.c: New test.
* gcc.target/aarch64/signbitv2sf.c: New test.

From-SVN: r271149

[MIPS] Skip forward src into next insn when the SRC reg is dead.

PR target/90357
gcc/
* config/mips/mips.c (mips_split_move): Skip forward SRC into
next insn when the SRC reg is dead.

From-SVN: r271146

gimple-ssa-strength-reduction.c (lookup_cand): Adjust index by 1.

* gimple-ssa-strength-reduction.c (lookup_cand): Adjust index by 1.
(alloc_cand_and_find_basis): Ditto.
(backtrace_base_for_ref, create_mul_ssa_cand): Remove if-then-else.
(create_mul_imm_cand, create_add_ssa_cand): Ditto.
(create_add_imm_cand, slsr_process_cast): Ditto.
(slsr_process_copy, replace_mult_candidate): Ditto.
(replace_rhs_if_not_dup, replace_one_candidate): Ditto.
(dump_cand_vec, analyze_candidates_and_replace): Skip NULL element.
(pass_strength_reduction::execute): Init the first NULL element.

From-SVN: r271145

Daily bump.

From-SVN: r271144

* sv.po: Update.

From-SVN: r271139

Use releasing_vec more broadly.

* cp-tree.h (struct releasing_vec): Replace get_ref method with
operator&.
(vec_safe_push, vec_safe_reserve, vec_safe_length, vec_safe_splice):
Forwarding functions for releasing_vec.
(release_tree_vector): Declare but don't define.
* call.c (build_op_delete_call, build_temp, call_copy_ctor)
(perform_direct_initialization_if_possible): Use releasing_vec.
* constexpr.c (cxx_eval_vec_init_1, cxx_eval_store_expression):
Likewise.
* cp-gimplify.c (cp_fold): Likewise.
* cvt.c (force_rvalue, ocp_convert): Likewise.
* decl.c (get_tuple_decomp_init): Likewise.
* except.c (build_throw): Likewise.
* init.c (perform_member_init, expand_default_init): Likewise.
* method.c (do_build_copy_assign, locate_fn_flags): Likewise.
* parser.c (cp_parser_userdef_char_literal)
(cp_parser_userdef_numeric_literal)
(cp_parser_userdef_string_literal)
(cp_parser_perform_range_for_lookup)
(cp_parser_range_for_member_function, cp_parser_omp_for_loop)
(cp_parser_omp_for_loop_init): Likewise.
* pt.c (tsubst_copy_and_build, do_class_deduction): Likewise.
* semantics.c (calculate_direct_bases, calculate_bases)
(finish_omp_barrier, finish_omp_flush, finish_omp_taskwait)
(finish_omp_taskyield, finish_omp_cancel)
(finish_omp_cancellation_point): Likewise.
* tree.c (build_vec_init_elt, strip_typedefs, strip_typedefs_expr)
(build_min_non_dep_op_overload): Likewise.
* typeck.c (build_function_call_vec, cp_build_function_call_nary)
(cp_build_modify_expr): Likewise.
* typeck2.c (build_functional_cast): Likewise.

From-SVN: r271138

libgo: drop Solaris 10 support

    Based on patch by Rainer Orth.

    Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/176938

From-SVN: r271135

PR libstdc++/90454.cc path construction from void*

Make the filesystem::path constructors SFINAE away for void* arguments,
instead of giving an error due to iterator_traits<void*>::reference.

PR libstdc++/90454.cc path construction from void*
* include/bits/fs_path.h (path::_Path): Use remove_pointer so that
pointers to void are rejected as well as void.
* include/experimental/bits/fs_path.h (path::_Path): Likewise.
* testsuite/27_io/filesystem/path/construct/80762.cc: Also check
pointers to void.
* testsuite/experimental/filesystem/path/construct/80762.cc: Likewise.

From-SVN: r271134

Fix testsuite regression caused by r271077

* g++.dg/cpp0x/Wattributes1.C: Adjust dg-error line number to fix
regression, by matching a note on any line.
* g++.dg/cpp0x/Wattributes2.C: Add another copy that checks the
correct line number is matched without depending on a library header.

From-SVN: r271133

Small markup changes to PBDS docs

* doc/xml/manual/policy_data_structures.xml: Comment out stray
<remark> elements. Fix formatting of bibliography references.

From-SVN: r271132

[PATCH] A couple of driver cleanups

https://gcc.gnu.org/ml/gcc-patches/2019-05/msg00624.html
* gcc.c (execute): Simplify cond-expr into if.  Reformat comment.
(run_attempt): Reformat line break

From-SVN: r271131

re PR bootstrap/90418 (powerpc-darwin9 bootstrap fails after r271013)

PR target/90418
        * config/rs6000/rs6000.c (rs6000_emit_epilogue): Don't load EH
        data registers in sibcall epilogues.
        Don't add EH_RETURN_STACKADJ_RTX to sp in sibcall epilogues.

From-SVN: r271130

re PR target/89221 (--enable-frame-pointer does not work as intended)

PR target/89221
* configure.ac (--enable-frame-pointer):
Disable by default for cygwin and mingw.
* configure: Regenerate.

From-SVN: r271129

2019-05-13  Chung-Lin Tang  <cltang@codesourcery.com>

Reviewed-by: Thomas Schwinge <thomas@codesourcery.com>
libgomp/
* libgomp-plugin.h (struct goacc_asyncqueue): Declare.
(struct goacc_asyncqueue_list): Likewise.
(goacc_aq): Likewise.
(goacc_aq_list): Likewise.
(GOMP_OFFLOAD_openacc_register_async_cleanup): Remove.
(GOMP_OFFLOAD_openacc_async_test): Remove.
(GOMP_OFFLOAD_openacc_async_test_all): Remove.
(GOMP_OFFLOAD_openacc_async_wait): Remove.
(GOMP_OFFLOAD_openacc_async_wait_async): Remove.
(GOMP_OFFLOAD_openacc_async_wait_all): Remove.
(GOMP_OFFLOAD_openacc_async_wait_all_async): Remove.
(GOMP_OFFLOAD_openacc_async_set_async): Remove.
(GOMP_OFFLOAD_openacc_exec): Adjust declaration.
(GOMP_OFFLOAD_openacc_cuda_get_stream): Likewise.
(GOMP_OFFLOAD_openacc_cuda_set_stream): Likewise.
(GOMP_OFFLOAD_openacc_async_exec): Declare.
(GOMP_OFFLOAD_openacc_async_construct): Declare.
(GOMP_OFFLOAD_openacc_async_destruct): Declare.
(GOMP_OFFLOAD_openacc_async_test): Declare.
(GOMP_OFFLOAD_openacc_async_synchronize): Declare.
(GOMP_OFFLOAD_openacc_async_serialize): Declare.
(GOMP_OFFLOAD_openacc_async_queue_callback): Declare.
(GOMP_OFFLOAD_openacc_async_host2dev): Declare.
(GOMP_OFFLOAD_openacc_async_dev2host): Declare.

* libgomp.h (struct acc_dispatch_t): Define 'async' sub-struct.
(gomp_acc_insert_pointer): Adjust declaration.
(gomp_copy_host2dev): New declaration.
(gomp_copy_dev2host): Likewise.
(gomp_map_vars_async): Likewise.
(gomp_unmap_tgt): Likewise.
(gomp_unmap_vars_async): Likewise.
(gomp_fini_device): Likewise.

* oacc-async.c (get_goacc_thread): New function.
(get_goacc_thread_device): New function.
(lookup_goacc_asyncqueue): New function.
(get_goacc_asyncqueue): New function.
(acc_async_test): Adjust code to use new async design.
(acc_async_test_all): Likewise.
(acc_wait): Likewise.
(acc_wait_async): Likewise.
(acc_wait_all): Likewise.
(acc_wait_all_async): Likewise.
(goacc_async_free): New function.
(goacc_init_asyncqueues): Likewise.
(goacc_fini_asyncqueues): Likewise.
* oacc-cuda.c (acc_get_cuda_stream): Adjust code to use new async
design.
(acc_set_cuda_stream): Likewise.
* oacc-host.c (host_openacc_exec): Adjust parameters, remove 'async'.
(host_openacc_register_async_cleanup): Remove.
(host_openacc_async_exec): New function.
(host_openacc_async_test): Adjust parameters.
(host_openacc_async_test_all): Remove.
(host_openacc_async_wait): Remove.
(host_openacc_async_wait_async): Remove.
(host_openacc_async_wait_all): Remove.
(host_openacc_async_wait_all_async): Remove.
(host_openacc_async_set_async): Remove.
(host_openacc_async_synchronize): New function.
(host_openacc_async_serialize): New function.
(host_openacc_async_host2dev): New function.
(host_openacc_async_dev2host): New function.
(host_openacc_async_queue_callback): New function.
(host_openacc_async_construct): New function.
(host_openacc_async_destruct): New function.
(struct gomp_device_descr host_dispatch): Remove initialization of old
interface, add intialization of new async sub-struct.
* oacc-init.c (acc_shutdown_1): Adjust to use gomp_fini_device.
(goacc_attach_host_thread_to_device): Remove old async code usage.
* oacc-int.h (goacc_init_asyncqueues): New declaration.
(goacc_fini_asyncqueues): Likewise.
(goacc_async_copyout_unmap_vars): Likewise.
(goacc_async_free): Likewise.
(get_goacc_asyncqueue): Likewise.
(lookup_goacc_asyncqueue): Likewise.

* oacc-mem.c (memcpy_tofrom_device): Adjust code to use new async
design.
(present_create_copy): Adjust code to use new async design.
(delete_copyout): Likewise.
(update_dev_host): Likewise.
(gomp_acc_insert_pointer): Add async parameter, adjust code to use new
async design.
(gomp_acc_remove_pointer): Adjust code to use new async design.
* oacc-parallel.c (GOACC_parallel_keyed): Adjust code to use new async
design.
(GOACC_enter_exit_data): Likewise.
(goacc_wait): Likewise.
(GOACC_update): Likewise.
* oacc-plugin.c (GOMP_PLUGIN_async_unmap_vars): Change to assert fail
when called, warn as obsolete in comment.

* target.c (goacc_device_copy_async): New function.
(gomp_copy_host2dev): Remove 'static', add goacc_asyncqueue parameter,
add goacc_device_copy_async case.
(gomp_copy_dev2host): Likewise.
(gomp_map_vars_existing): Add goacc_asyncqueue parameter, adjust code.
(gomp_map_pointer): Likewise.
(gomp_map_fields_existing): Likewise.
(gomp_map_vars_internal): New always_inline function, renamed from
gomp_map_vars.
(gomp_map_vars): Implement by calling gomp_map_vars_internal.
(gomp_map_vars_async): Implement by calling gomp_map_vars_internal,
passing goacc_asyncqueue argument.
(gomp_unmap_tgt): Remove static, add attribute_hidden.
(gomp_unref_tgt): New function.
(gomp_unmap_vars_internal): New always_inline function, renamed from
gomp_unmap_vars.
(gomp_unmap_vars): Implement by calling gomp_unmap_vars_internal.
(gomp_unmap_vars_async): Implement by calling
gomp_unmap_vars_internal, passing goacc_asyncqueue argument.
(gomp_fini_device): New function.
(gomp_exit_data): Adjust gomp_copy_dev2host call.
(gomp_load_plugin_for_device): Remove old interface, adjust to load
new async interface.
(gomp_target_fini): Adjust code to call gomp_fini_device.

* plugin/plugin-nvptx.c (struct cuda_map): Remove.
(struct ptx_stream): Remove.
(struct nvptx_thread): Remove current_stream field.
(cuda_map_create): Remove.
(cuda_map_destroy): Remove.
(map_init): Remove.
(map_fini): Remove.
(map_pop): Remove.
(map_push): Remove.
(struct goacc_asyncqueue): Define.
(struct nvptx_callback): Define.
(struct ptx_free_block): Define.
(struct ptx_device): Remove null_stream, active_streams, async_streams,
stream_lock, and next fields.
(enum ptx_event_type): Remove.
(struct ptx_event): Remove.
(ptx_event_lock): Remove.
(ptx_events): Remove.
(init_streams_for_device): Remove.
(fini_streams_for_device): Remove.
(select_stream_for_async): Remove.
(nvptx_init): Remove ptx_events and ptx_event_lock references.
(nvptx_attach_host_thread_to_device): Remove CUDA_ERROR_NOT_PERMITTED
case.
(nvptx_open_device): Add free_blocks initialization, remove
init_streams_for_device call.
(nvptx_close_device): Remove fini_streams_for_device call, add
free_blocks destruct code.
(event_gc): Remove.
(event_add): Remove.
(nvptx_exec): Adjust parameters and code.
(nvptx_free): Likewise.
(nvptx_host2dev): Remove.
(nvptx_dev2host): Remove.
(nvptx_set_async): Remove.
(nvptx_async_test): Remove.
(nvptx_async_test_all): Remove.
(nvptx_wait): Remove.
(nvptx_wait_async): Remove.
(nvptx_wait_all): Remove.
(nvptx_wait_all_async): Remove.
(nvptx_get_cuda_stream): Remove.
(nvptx_set_cuda_stream): Remove.
(GOMP_OFFLOAD_alloc): Adjust code.
(GOMP_OFFLOAD_free): Likewise.
(GOMP_OFFLOAD_openacc_register_async_cleanup): Remove.
(GOMP_OFFLOAD_openacc_exec): Adjust parameters and code.
(GOMP_OFFLOAD_openacc_async_test_all): Remove.
(GOMP_OFFLOAD_openacc_async_wait): Remove.
(GOMP_OFFLOAD_openacc_async_wait_async): Remove.
(GOMP_OFFLOAD_openacc_async_wait_all): Remove.
(GOMP_OFFLOAD_openacc_async_wait_all_async): Remove.
(GOMP_OFFLOAD_openacc_async_set_async): Remove.
(cuda_free_argmem): New function.
(GOMP_OFFLOAD_openacc_async_exec): New plugin hook function.
(GOMP_OFFLOAD_openacc_create_thread_data): Adjust code.
(GOMP_OFFLOAD_openacc_cuda_get_stream): Adjust code.
(GOMP_OFFLOAD_openacc_cuda_set_stream): Adjust code.
(GOMP_OFFLOAD_openacc_async_construct): New plugin hook function.
(GOMP_OFFLOAD_openacc_async_destruct): New plugin hook function.
(GOMP_OFFLOAD_openacc_async_test): Remove and re-implement.
(GOMP_OFFLOAD_openacc_async_synchronize): New plugin hook function.
(GOMP_OFFLOAD_openacc_async_serialize): New plugin hook function.
(GOMP_OFFLOAD_openacc_async_queue_callback): New plugin hook function.
(cuda_callback_wrapper): New function.
(cuda_memcpy_sanity_check): New function.
(GOMP_OFFLOAD_host2dev): Remove and re-implement.
(GOMP_OFFLOAD_dev2host): Remove and re-implement.
(GOMP_OFFLOAD_openacc_async_host2dev): New plugin hook function.
(GOMP_OFFLOAD_openacc_async_dev2host): New plugin hook function.

From-SVN: r271128

[DWARF] dwarf2out cleanups

https://gcc.gnu.org/ml/gcc-patches/2019-05/msg00485.html
* dwarf2out.c (breakout_comdat_types): Move comment to correct
piece of code.
(const_ok_for_output_1): Balance parens around #if/#else/#endif
(gen_member_die): Move abstract origin check earlier.  Only VARs
can be static_inline_p.  Simplify splicing control flow.

From-SVN: r271127

tree-vect-slp.c (vect_get_and_check_slp_defs): Handle VIEW_CONVERT_EXPR.

2019-05-13  Richard Biener  <rguenther@suse.de>

* tree-vect-slp.c (vect_get_and_check_slp_defs): Handle
VIEW_CONVERT_EXPR.
(vect_build_slp_tree_1): Likewise.

From-SVN: r271126

re PR tree-optimization/90402 (ICE in slpeel_duplicate_current_defs_from_edges)

2019-05-13  Richard Biener  <rguenther@suse.de>

PR tree-optimization/90402
* tree-if-conv.c (tree_if_conversion): Value number only
the loop body by making the latch an exit of the region
as well.
* tree-ssa-sccvn.c (process_bb): Add flag whether to skip
processing PHIs.
(do_rpo_vn): Deal with multiple edges into the entry block
that are not backedges inside the region by skipping PHIs
of the entry block.

* gcc.dg/torture/pr90402-1.c: New testcase.

From-SVN: r271125

re PR tree-optimization/90316 (large compile time increase in opt / alias stmt walking for Go example)

2019-05-13  Richard Biener  <rguenther@suse.de>

PR tree-optimization/90316
* tree-ssa-pre.c (insert_aux): Fold into ...
(insert): ... this function.  Use a RPO walk to reduce the
number of required iterations.

From-SVN: r271124

Document P0811R3 status in C++20 table

2019-05-13  Edward Smith-Rowland  <3dw4rd@verizon.net>

* doc/xml/manual/status_cxx2020.xml: Document P0811R3 status.

From-SVN: r271122

Fix ChangeLog date

From-SVN: r271121

Remove Profile Mode, deprecated since GCC 7.1

The Profile Mode extension is not used by anybody, nor maintained by
anybody. The containers do not support the full API specified in recent
standards, and so enabling Profile Mode is not source compatible with
much modern C++ code. The heuristics that would check the profile
information and make useful suggestions never materialized, so it isn't
useful.

It should be removed.

Remove Profile Mode, deprecated since 7.1.0
* doc/Makefile.am: Remove XML file for profile mode docs.
* doc/Makefile.in: Regenerate.
* doc/xml/authors.xml: Remove authors of profile mode docs.
* doc/xml/manual/appendix_contributing.xml: Remove mention of profile
mode.
* doc/xml/manual/debug.xml: Likewise.
* doc/xml/manual/evolution.xml: Document removal of profile mode.
* doc/xml/manual/profile_mode.xml: Remove profile mode docs.
* doc/xml/manual/spine.xml: Remove profile mode author credit.
* doc/xml/manual/test.xml: Remove docs for dg-require-profile-mode
directive.
* doc/xml/manual/using.xml: Remove docs for profile mode headers and
macro.
* doc/html/*: Regenerate.
* include/Makefile.am: Remove profile mode headers.
* include/Makefile.in: Regenerate.
* include/bits/c++config (std::__profile): Remove namespace.
[_GLIBCXX_PROFILE]: Remove checks for macro.
* include/profile/array: Remove.
* include/profile/base.h: Remove.
* include/profile/bitset: Remove.
* include/profile/deque: Remove.
* include/profile/forward_list: Remove.
* include/profile/impl/profiler.h: Remove.
* include/profile/impl/profiler_algos.h: Remove.
* include/profile/impl/profiler_container_size.h: Remove.
* include/profile/impl/profiler_hash_func.h: Remove.
* include/profile/impl/profiler_hashtable_size.h: Remove.
* include/profile/impl/profiler_list_to_slist.h: Remove.
* include/profile/impl/profiler_list_to_vector.h: Remove.
* include/profile/impl/profiler_map_to_unordered_map.h: Remove.
* include/profile/impl/profiler_node.h: Remove.
* include/profile/impl/profiler_state.h: Remove.
* include/profile/impl/profiler_trace.h: Remove.
* include/profile/impl/profiler_vector_size.h: Remove.
* include/profile/impl/profiler_vector_to_list.h: Remove.
* include/profile/iterator_tracker.h: Remove.
* include/profile/list: Remove.
* include/profile/map: Remove.
* include/profile/map.h: Remove.
* include/profile/multimap.h: Remove.
* include/profile/multiset.h: Remove.
* include/profile/ordered_base.h: Remove.
* include/profile/set: Remove.
* include/profile/set.h: Remove.
* include/profile/unordered_base.h: Remove.
* include/profile/unordered_map: Remove.
* include/profile/unordered_set: Remove.
* include/profile/vector: Remove.
* scripts/run_doxygen: Do not process profile mode headers.
* testsuite/23_containers/array/element_access/60497.cc: Don't use
profile mode type.
* testsuite/23_containers/array/specialized_algorithms/swap_cxx17.cc:
Remove dg-skip-if for profile mode.
* testsuite/23_containers/forward_list/capacity/1.cc: Remove
preprocessor check for profile mode.
* testsuite/23_containers/list/capacity/29134.cc: Likewise.
* testsuite/23_containers/map/modifiers/extract.cc: Remove dg-skip-if
for profile mode.
* testsuite/23_containers/map/modifiers/insert_or_assign/1.cc:
Likewise.
* testsuite/23_containers/map/modifiers/try_emplace/1.cc: Likewise.
* testsuite/23_containers/multimap/modifiers/extract.cc: Likewise.
* testsuite/23_containers/multiset/modifiers/extract.cc: Likewise.
* testsuite/23_containers/set/modifiers/extract.cc: Likewise.
* testsuite/23_containers/unordered_map/modifiers/extract.cc:
Likewise.
* testsuite/23_containers/unordered_multimap/modifiers/extract.cc:
Likewise.
* testsuite/23_containers/unordered_multiset/modifiers/extract.cc:
Likewise.
* testsuite/23_containers/unordered_set/modifiers/extract.cc:
Likewise.
* testsuite/23_containers/vector/bool/capacity/29134.cc: Remove
preprocessor check for profile mode.
* testsuite/23_containers/vector/bool/modifiers/insert/31370.cc:
Likewise.
* testsuite/23_containers/vector/modifiers/insert_vs_emplace.cc:
Remove dg-skip-if for profile mode.
* testsuite/25_algorithms/binary_search/partitioned.cc: Likewise.
* testsuite/25_algorithms/equal_range/partitioned.cc: Likewise.
* testsuite/25_algorithms/lexicographical_compare/71545.cc: Likewise.
* testsuite/25_algorithms/lower_bound/partitioned.cc: Likewise.
* testsuite/25_algorithms/upper_bound/partitioned.cc: Likewise.
* testsuite/Makefile.am: Remove profile_flags variable and
* testsuite/Makefile.am: Remove profile_flags variable and
check-profile target.
* testsuite/Makefile.in: Regenerate.
* testsuite/ext/profile/all.cc: Remove.
* testsuite/ext/profile/mutex_extensions_neg.cc: Remove.
* testsuite/ext/profile/profiler_algos.cc: Remove.
* testsuite/ext/profile/replace_new.cc: Remove.
* testsuite/ext/throw_allocator/deallocate_global.cc: Remove
preprocessor check for profile mode.
* testsuite/ext/throw_allocator/deallocate_local.cc: Likewise.
* testsuite/lib/libstdc++.exp (check_v3_target_profile_mode): Remove.
(check_v3_target_normal_mode): Do not check for profile mode macro.
* testsuite/libstdc++-prettyprinters/80276.cc: Remove dg-skip-if for
profile mode.
* testsuite/libstdc++-prettyprinters/compat.cc: Likewise.
* testsuite/libstdc++-prettyprinters/cxx11.cc: Likewise.
* testsuite/libstdc++-prettyprinters/cxx17.cc: Likewise.
* testsuite/libstdc++-prettyprinters/debug.cc: Likewise.
* testsuite/libstdc++-prettyprinters/debug_cxx11.cc: Likewise.
* testsuite/libstdc++-prettyprinters/libfundts.cc: Likewise.
* testsuite/libstdc++-prettyprinters/simple.cc: Likewise.
* testsuite/libstdc++-prettyprinters/simple11.cc: Likewise.
* testsuite/libstdc++-prettyprinters/whatis.cc: Likewise.
* testsuite/libstdc++-prettyprinters/whatis2.cc: Likewise.

From-SVN: r271120

Remove array_allocator extension, deprecated since 4.9.0

This type is not a conforming allocator, because it cannot be reliably
rebound to allocate for a different type. The result of the rebind
transformation still uses the same underlying std::tr1::array<T, 1>
array, which may not be correctly aligned or even have elements the
right size for the value_type of the rebound allocator.

It has been deprecated for several years and should now be removed.

* doc/xml/manual/allocator.xml: Remove documentation for
array_allocator.
* doc/xml/manual/evolution.xml: Document array_allocator removal.
* doc/xml/manual/using.xml: Remove header from documentation.
* include/Makefile.am: Remove <ext/array_allocator.h> header.
* include/Makefile.in: Regenerate.
* include/ext/array_allocator.h: Remove.
* include/precompiled/extc++.h: Do not include removed header.
* testsuite/ext/array_allocator/1.cc: Remove.
* testsuite/ext/array_allocator/2.cc: Remove.
* testsuite/ext/array_allocator/26875.cc: Remove.
* testsuite/ext/array_allocator/3.cc: Remove.
* testsuite/ext/array_allocator/check_deallocate_null.cc: Remove.
* testsuite/ext/array_allocator/check_delete.cc: Remove.
* testsuite/ext/array_allocator/check_new.cc: Remove.
* testsuite/ext/array_allocator/variadic_construct.cc: Remove.
* testsuite/ext/headers.cc: Do not include removed header.

From-SVN: r271119

Fix wrong usage of dump_printf_loc (PR tree-optimization/90416).

2019-05-13  Martin Liska  <mliska@suse.cz>

PR tree-optimization/90416
* tree-vect-stmts.c (vect_check_load_store_mask): Concatenate
string instead of passing the second part as va_arg argument.

From-SVN: r271118

Do not follow zero edges in cycle detection (PR gcov-profile/90380).

2019-05-13  Martin Liska  <mliska@suse.cz>

PR gcov-profile/90380
* gcov.c (handle_cycle): Do not support zero cycle count,
it should not be possible.
(path_contains_zero_cycle_arc): New function.
(circuit): Ignore zero cycle arc counts.

From-SVN: r271117

Test for not existence of a negative loop (PR gcov-profile/90380).

2019-05-13  Martin Liska  <mliska@suse.cz>

PR gcov-profile/90380
* gcov.c (enum loop_type): Remove the enum and
the operator.
(handle_cycle): Assert that we should not reach
a negative count.
(circuit): Use loop_found instead of a tri-state loop_type.
(get_cycles_count): Do not handle NEGATIVE_LOOP as it can't
happen.

From-SVN: r271116

Daily bump.

From-SVN: r271115

darwin, powerpc - set .machine in an asm file.

The asm file fails to build if we use a modern assembler
which checks that the machine is consistent with the
filetype.  Fixed by adjusting in a similar manner to
other assembler.

libgcc/

2019-05-12  Iain Sandoe  <iain@sandoe.co.uk>

* config/rs6000/darwin-vecsave.S: Set .machine appropriately.

From-SVN: r271111

x86 - fix pr82920

The various thunks output codes have inconsisten output
mechanisms. The patch factors out some common code that
writes out the jumps and uses the regular output scheme
that accounts for __USER_LABEL_PREFIX__.

The testsuite changes are largely mechanical compensation
for the revised output (and the fact that Darwin doesn't
use non-PIC by default).

gcc/

2019-05-12  Iain Sandoe  <iain@sandoe.co.uk>

PR target/82920
* config/i386/i386.c (ix86_output_jmp_thunk_or_indirect): New.
(ix86_output_indirect_branch_via_reg): Use output mechanism
accounting for __USER_LABEL_PREFIX__.
(ix86_output_indirect_branch_via_push): Likewise.
(ix86_output_function_return): Likewise.
(ix86_output_indirect_function_return): Likewise.

gcc/testsuite/

2019-05-12  Iain Sandoe  <iain@sandoe.co.uk>
    Dominique d'Humieres  <dominiq@gcc.gnu.org>

PR target/82920
* gcc.target/i386/indirect-thunk-1.c: Adjust scan-asms for Darwin,
do not use -fno-pic on Darwin.
* gcc.target/i386/indirect-thunk-2.c: Likewise.
* gcc.target/i386/indirect-thunk-3.c: Likewise.
* gcc.target/i386/indirect-thunk-4.c: Likewise.
* gcc.target/i386/indirect-thunk-7.c: Likewise.
* gcc.target/i386/indirect-thunk-attr-1.c: Likewise.
* gcc.target/i386/indirect-thunk-attr-2.c: Likewise.
* gcc.target/i386/indirect-thunk-attr-3.c: Likewise.
* gcc.target/i386/indirect-thunk-attr-4.c: Likewise.
* gcc.target/i386/indirect-thunk-attr-5.c: Likewise.
* gcc.target/i386/indirect-thunk-attr-6.c: Likewise.
* gcc.target/i386/indirect-thunk-attr-7.c: Likewise.
* gcc.target/i386/indirect-thunk-attr-8.c: Likewise.
* gcc.target/i386/indirect-thunk-extern-1.c: Likewise.
* gcc.target/i386/indirect-thunk-extern-2.c: Likewise.
* gcc.target/i386/indirect-thunk-extern-3.c: Likewise.
* gcc.target/i386/indirect-thunk-extern-4.c: Likewise.
* gcc.target/i386/indirect-thunk-extern-7.c: Likewise.
* gcc.target/i386/indirect-thunk-inline-1.c: Likewise.
* gcc.target/i386/indirect-thunk-inline-2.c: Likewise.
* gcc.target/i386/indirect-thunk-inline-3.c: Likewise.
* gcc.target/i386/indirect-thunk-inline-4.c: Likewise.
* gcc.target/i386/indirect-thunk-inline-7.c: Likewise.
* gcc.target/i386/indirect-thunk-register-1.c: Likewise.
* gcc.target/i386/indirect-thunk-register-2.c: Likewise.
* gcc.target/i386/indirect-thunk-register-3.c: Likewise.
* gcc.target/i386/indirect-thunk-register-4.c: Likewise.
* gcc.target/i386/ret-thunk-1.c: Likewise.
* gcc.target/i386/ret-thunk-10.c: Likewise.
* gcc.target/i386/ret-thunk-11.c: Likewise.
* gcc.target/i386/ret-thunk-12.c: Likewise.
* gcc.target/i386/ret-thunk-13.c: Likewise.
* gcc.target/i386/ret-thunk-14.c: Likewise.
* gcc.target/i386/ret-thunk-15.c: Likewise.
* gcc.target/i386/ret-thunk-16.c: Likewise.
* gcc.target/i386/ret-thunk-2.c: Likewise.
* gcc.target/i386/ret-thunk-22.c: Likewise.
* gcc.target/i386/ret-thunk-23.c: Likewise.
* gcc.target/i386/ret-thunk-24.c: Likewise.
* gcc.target/i386/ret-thunk-3.c: Likewise.
* gcc.target/i386/ret-thunk-4.c: Likewise.
* gcc.target/i386/ret-thunk-5.c: Likewise.
* gcc.target/i386/ret-thunk-6.c: Likewise.
* gcc.target/i386/ret-thunk-7.c: Likewise.
* gcc.target/i386/ret-thunk-8.c: Likewise.
* gcc.target/i386/ret-thunk-9.c: Likewise.

Co-Authored-By: Dominique d'Humieres <dominiq@gcc.gnu.org>
From-SVN: r271110

Accept code attributes as rtx codes in .md files

The recent AArch64 absolute difference patterns had to go through
some hoops to pair max/min rtx codes with the same signedness.
I also need to pair signed/unsigned codes with sign/zero extension
for some SVE ACLE patterns.

This patch therefore supports <...> as rtx codes, like we already
do for modes.

2019-05-12  Richard Sandiford  <richard.sandiford@arm.com>

gcc/
* doc/md.texi: Document use of code attributes in rtx patterns.
* read-md.h (rtx_reader::rtx_alloc_for_name): New member function.
* read-rtl.c (find_code): Split out search loops into...
(maybe_find_code): ...this new function.
(check_code_iterator): Make the error message more informative.
(check_code_attribute): New function.
(rtx_reader::rtx_alloc_for_name): Likewise.
(rtx_reader::read_rtx_code): Use rtx_alloc_for_name.
* config/aarch64/predicates.md (aarch64_smin, aarch64_umin): Delete.
* config/aarch64/aarch64-simd.md (*aarch64_<su>abd<mode>_3): Use
<max_opp> directly as an rtx code instead of via a match_operator.
* config/aarch64/aarch64-sve.md (aarch64_<su>abd<mode>_3): Likewise.
(<su>abd<mode>_3): Update accordingly.

From-SVN: r271107

fortran: C++ support for generating C prototypes

When generating C prototypes for Fortran procedures with the
-fc-prototypes and -fc-prototypes-external options, print a snippet
defining macros for complex types, and add C++ support by suppressing
mangling.

fortran/ChangeLog:

2019-05-12  Janne Blomqvist  <jb@gcc.gnu.org>

* dump-parse-tree.c (get_c_type_name): Use macros for complex type
names.
* parse.c (gfc_parse_file): Define complex macros, add CPP support
when printing C prototypes.

From-SVN: r271106

Daily bump.

From-SVN: r271105

darwin, ppc - improve debug for mdebug-stack

Darwin uses an out of line save when complete context
needs to be saved, including the vector regs.

This patch prints the status of that when -mdebug=stack
is given.

gcc/

2019-05-12  Iain Sandoe  <iain@sandoe.co.uk>

* config/rs6000/rs6000.c (debug_stack_info): When -mdebug=stack
is given, print the state of the EH "save world" computation for
Darwin.

From-SVN: r271101

fixincludes - fix PR90379

One should not provide test_text for wrap style fixes
this was causing the test to fail.  No change to the
actual fix.

2019-05-11  Iain Sandoe  <iain@sandoe.co.uk>
PR target/90379
PR bootstrap/89864
* inclhack.def (darwin_ucred__Atomic): Do not supply test_text
for wrap fixes.
* fixincl.x: Regenerated.

From-SVN: r271098

testsuite, darwin] Fix PR81058.

The tests fail because Darwin indirects common accesses which causes different
codegen and the mismatch in output. Placing the vars in regular .data section
fixes that.

gcc/testsuite/

2019-05-11  Iain Sandoe  <iain@sandoe.co.uk>

PR testsuite/81058
* gcc.target/i386/avx512bw-vpmovswb-1.c: Use regular data section
for variables on Darwin, rather than common.
* gcc.target/i386/avx512bw-vpmovuswb-1.c: Likewise.
* gcc.target/i386/avx512bw-vpmovwb-1.c: Likewise.

From-SVN: r271097

stl_bvector.h (operator==(const _Bit_iterator_base&, const _Bit_iterator_base&)): Make hidden friend.

2019-05-11  François Dumont  <fdumont@gcc.gnu.org>

* include/bits/stl_bvector.h
(operator==(const _Bit_iterator_base&, const _Bit_iterator_base&)):
Make hidden friend.
(operator<(const _Bit_iterator_base&, const _Bit_iterator_base&)):
Likewise.
(operator!=(const _Bit_iterator_base&, const _Bit_iterator_base&)):
Likewise.
(operator>(const _Bit_iterator_base&, const _Bit_iterator_base&)):
Likewise.
(operator<=(const _Bit_iterator_base&, const _Bit_iterator_base&)):
Likewise.
(operator>=(const _Bit_iterator_base&, const _Bit_iterator_base&)):
Likewise.
(operator-(const _Bit_iterator_base&, const _Bit_iterator_base&)):
Likewise.
(_Bit_iterator::operator+(difference_type)): Likewise and allow NRVO
copy elision.
(_Bit_iterator::operator-(difference_type)): Likewise.
(operator+(ptrdiff_t, const _Bit_iterator&)): Make hidden friend.
(_Bit_const_iterator::operator+(difference_type)): Likewise and allow
NRVO copy elision.
(_Bit_const_iterator::operator-(difference_type)): Likewise.
(operator+(ptrdiff_t, const _Bit_const_iterator&)): Make hidden friend.

From-SVN: r271096

re PR c++/59813 (tail-call elimination didn't fire for left-shift of char to cout)

PR c++/59813
* config/aarch64/aarch64.c (aarch64_expand_epilogue): Don't add
EH_RETURN_STACKADJ_RTX to sp in sibcall epilogues.

From-SVN: r271093

i386.md (floatdi<X87MODEF:mode>2_i387_with_xmm): Use pinsrd for TARGET_SSE4_1.

* config/i386/i386.md (floatdi<X87MODEF:mode>2_i387_with_xmm):
Use pinsrd for TARGET_SSE4_1.
* config/i386/sse.md (movdi_to_sse): Ditto.

From-SVN: r271092

typeck.c (cp_build_function_call_vec): When mark_used fails unconditionally return error_mark_node.

/cp
2019-05-11  Paolo Carlini  <paolo.carlini@oracle.com>

* typeck.c (cp_build_function_call_vec): When mark_used fails
unconditionally return error_mark_node.

/testsuite
2019-05-11  Paolo Carlini  <paolo.carlini@oracle.com>

* g++.dg/cpp2a/multiple-deleted-destroying-delete-error-1.C: New.
* g++.dg/cpp2a/multiple-deleted-destroying-delete-error-2.C: Likewise.

From-SVN: r271091

runtime: set up g early

    runtime.throw needs a g to work properly. Set up g early, to
    ensure that if something goes wrong in the runtime startup (e.g.
    runtime.check fails), the program terminates in a reasonable way.

    Reviewed-on: https://go-review.googlesource.com/c/gofrontend/+/176657

From-SVN: r271088

Daily bump.

From-SVN: r271087