system/skeleton: don't use random-seed from a read-only fs

A random-seed from a read-only filesystem is useless.

Also, drop the check for /etc/random-seed existence; it must exist after a
touch.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

system/skeleton: remove random-seed

Seeding the entropy pool with a known seed makes more harm than good. This is
especially bad for when /etc is not on a persistent writable storage, so the
entropy pool is seeded with the same value on every boot. Just drop it.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

usb_modeswitch_data: bump to version 20150627

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

usb_modeswitch: bump to version 2.2.3

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

stm32flash: new package

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

lvm2: bump to version 2.02.125

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

bind: security bump to version 9.9.7-P1

Fixes:
CVE-2015-4620 - On servers configured to perform DNSSEC validation an
assertion failure could be triggered on answers from a specially
configured server.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

snmppp: autoreconf is not needed anymore

Tarballs of recent versions ship a configure script.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

c-periphery: bump version to 1.0.3

Signed-off-by: Vanya Sergeev <vsergeev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lua-periphery: add hash file

Signed-off-by: Vanya Sergeev <vsergeev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lua-periphery: bump version to 1.0.5, remove dependency on c-periphery

The new version of the lua-periphery LuaRocks package handles fetching the
c-periphery dependency, so that it no longer needs to be cloned during the
lua-periphery build process. Consequently, this removes the need for selecting
c-periphery as a package dependency in buildroot and the need for the patches
that modify lua-periphery to be built against an external c-periphery.

[Thomas:
  - remove dependency from .mk file, as noticed by Baruch
  - add patch to fix uClibc build]

Signed-off-by: Vanya Sergeev <vsergeev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libtirpc: remove host-pkgconf dependency

configure.ac does not contain PKG_CHECK_MODULES anymore.

Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

iproute2: bump to version 4.1.1

Now with local header for tipc support on older kernels.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/mesa3d: If udev is not present, sysfs is used as a replacement

Support for sysfs as a replacement for udev was added 2014/05/30:
http://cgit.freedesktop.org/mesa/mesa/commit/configure.ac?id=85b6f36ca5238dd3fec7c5fcacb8b7074ce53c8e

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libevdev: bump version to 1.4.3

>From [1]:
- tools: widen frequency resolution to µs in the DPI tool
- tools: complain about devices that don't have abs x/y axes in the edge detector
- include: update to 4.1 header

[1] http://lists.freedesktop.org/archives/input-tools/2015-June/001171.html

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

xtables-addons: bump to version 2.7

Fixes build issues with kernels 4.1+

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/bind: Enable filter-aaaa-on-v4 option

This allows usage of the filter-aaaa-on-v4 configuration option.
This option disables responding with AAAA records when the request
is made over ipv4. This may be useful on networks with
ipv6 inside, but no ISP ipv6 (when combined with only
listening on ipv4).

See https://kb.isc.org/article/AA-00576/
Filter-AAAA-option-in-BIND-9-.html
for more information.

Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

pkg-autotools: fix patching libtool for version 2.4

If the libtool used by the package is 2.4 (i.e. with no patchlevel), we
end up with error messages like this one, seen when building ntp-4.2.8p3:

    /bin/sh: line 0: test: 2.4: integer expression expected

That's because the current sed expression "[0-9].[0-9]." only deletes content
like "2.4.", so it leaves "2.4" (no patch level *and* no second period) intact,
resulting in an ltmain_patchlevel of "2.4", not empty, and not "0".  Then the
shell line goes bad, because the built in shell test -gt operates on integers
only, and fails on floating point numbers (like "2.4").

Additionally, the existing sed lines are problematic in other ways, because the
current expression "[0-9].[0-9]" will match "234" as well as "2.4", as an unescaped
period matches any character, not just a period.  Also, the lack of an asterisk
after the first character may be a problem in the future, if a two digit initial
number is used.

So, this patch changes the sed regex as follows:

* Match a string of digits when searching for a number.  I.e. "[0-9]*"
* Match specifically a period in between two numbers.  I.e. "\."
* When searching for a patch level, make the second period optional.  I.e. "\.*"

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

squid: explicitly disable openssl support when BR2_PACKAGE_OPENSSL != y

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/vlc: Fix SSE support with gcc5

Compile fails

make[4]: Entering directory `/home/fli4l/br6_freeswitch/output/build/vlc-2.2.1/modules'
  CC       video_chroma/libi420_yuy2_sse2_plugin_la-i420_yuy2.lo
In file included from video_chroma/i420_yuy2.c:35:0:
video_chroma/i420_yuy2.c: In function 'I420_UYVY_Filter':
video_chroma/i420_yuy2.c:194:23: error: calling 'I420_UYVY.isra.2' with SSE caling convention without SSE/SSE2 enabled
 VIDEO_FILTER_WRAPPER( I420_UYVY )
                       ^
../include/vlc_filter.h:266:13: note: in definition of macro 'VIDEO_FILTER_WRAPPER'
             name( p_filter, p_pic, p_outpic );                          \

using this defconfig

BR2_x86_pentium2=y
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_GCC_VERSION_5_1_X=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_VLC=y

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

squid: add gnutls support

A new --without-gnutls option has been added to configure, so let's use
it in order to enable or disable gnutls support in squid.

Related:

  http://www.squid-cache.org/Versions/v3/3.5/squid-3.5.6-RELEASENOTES.html#ss4.1

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

squid: bump to version 3.5.6

- Bump to version 3.5.6
- Update hash file
- Change configure options according to release notes

Release notes:

  http://www.squid-cache.org/Versions/v3/3.5/squid-3.5.6-RELEASENOTES.html

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

nano: bump to version 2.4.2

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

lvm2: bump to version 2.02.124

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

berkeleydb: accommodate threads presence/absence

In BerkeleyDB the most convenient implementation of mutexes on Linux is
via POSIX mutex, and that requires pthread library.

Still it is possible to build (and hopefully use) BerkeleyDB without
mutexes. For this we pass "--disable-mutexsupport" during configuration
of the package.

Fixes:
http://autobuild.buildroot.net/results/717f3b37600a56262badc6f7cb64d7949fdacb67/
http://autobuild.buildroot.net/results/80ebf0382992b277fd94743815bbf0c7426a3654/

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

openssl: always build apps

Now that building the openssl binary without MMU is supported, the only
reason left for not building apps if the openssl binary is disabled is
to save build time. Moreover, the commit
720893b62510438237b9923d744dd079ddb4f67d "openssl: disable apps for
NOMMU", which added this behavior, had a side effect: the scripts from
apps (CA.pl, CA.sh and tsget) and the default configuration file
(openssl.cnf) were no longer installed, which is not advertized by the
BR2_PACKAGE_OPENSSL_BIN option. CA.pl and CA.sh use the openssl binary,
so not installing them without the latter makes sense. But tsget does
not use the openssl binary, and openssl.cnf can be used by libcrypto, so
it is preferable to handle BR2_PACKAGE_OPENSSL_BIN like before the
commit mentioned above, i.e. to always build and install apps and to
just remove the openssl binary afterwards if needed.

This is what the current commit does, but installing only the helper
scripts having their dependencies (perl or the openssl binary)
satisfied. The help text is updated accordingly.

Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

collectd: fix parallel build issues

For version 5.5.x a reorganization was made and some common funtionality
was moved to libraries, however proper dependency accounting isn't
handled in the Makefile thus causing build breakage on some parallel
builds. Fixes:
http://autobuild.buildroot.net/results/a5e/a5e6891e9ea66ac8216d3302da3702770ef7247b/

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package:sysdig: bump to version 0.1.100

This patch bumps to version 0.1.100, removes the no more
neded upstream included patch and adds the ENABLE_DKMS=OFF
configure option.

Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ntp: drop unused POST_PATCH_HOOKS handling

Now that NTP_PATCH_FIXUPS is gone.

Reported-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

btrfs-progs: drop dependency on acl and attr

btrfs-progs does not depend on libacl since version v4.0.1:

  ab5984f btrfs-progs: convert: drop dependency on sys/acl.h
  https://git.kernel.org/cgit/linux/kernel/git/kdave/btrfs-progs.git/commit/?id=ab5984ff6cce6f12063720b6dafc1afcd6606853

Moreover, btrfs-progs does not depend on attr since version v3.14:

  b5fe148 btrfs-progs: include <sys/xattr.h> instead of <attr/xattr.h>
  https://git.kernel.org/cgit/linux/kernel/git/kdave/btrfs-progs.git/commit/?id=b5fe148715ea295e2b951ec6c90409b9d81978d8

Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

mtd: Add xattr support

Adding extended attribute support for the mtd tools when the attr
package is selected. This is needed for SELinux support.

Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ola: Bump to version 0.9.6

We can delete the patch, as it was integrated upstream.

Signed-off-by: Simon Marchi <simon.marchi@polymtl.ca>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/opencv: add opengl support

In OpenCV, OpenGL is only used by highgui module.

OpenGL support is done using extensions from 3rd party framework: either
Qt5OpenGL with Qt5 (with GL support only, not GLES); or gtkglext (which
is not available in Buildroot) with gtk2

So, make OpenGL knob a sub-option of the Qt5 support option.

Note: we enclose both the GUI toolkit choice and the GL option in an
if-block, so that the GL option gets properly indented; having it
depend on WITH_QT5 is not enough, because it does not directly follow
it, so kconfig would not consider it for indenting.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[yann.morin.1998@free.fr: tweak commit log about the if-block]
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/opencv: add gtk3 support

OpenCV now also supports gtk3 as a GUI toolkit, in addition to gtk2,
but only one may be enabled at a time.

So, add gtk3 in the choice to select the GUI toolkit.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[yann.morin.1998@free.fr: drop the superfluous depends-on for the
 kconfig symbol, since they're no longer needed now we depend-on rather
 than select]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/opencv: add qt5 support

Starting with the 2.4.6 release, OpenCV supports either Qt4 or Qt5 as GUI
toolkit, so add Qt5 in the GUI toolkit choice.

When Qt4 is enabled (and thus Qt5 is hidden and disabled), no need to
show a comment stating "Qt5 support needs Qt5", because Qt5 is not
selectable.

Conversely, when Qt5 is enabled and Qt4 is not, then no need to show a
comment stating "Qt4 support needs Qt4", because enabling Qt4 would
disable Qt5.

So, we only show the comments when neither toolkit is enabled.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: split-out the Qt5 hunk from the
 switch-selects-to-depends hunk]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/opencv: depends on GUI toolkits, rather than select them

Currently, we only support either Qt4 or gtk2, but OpenCV also
additionally supports Qt5 or gtk3, making for a choice of four
toolkits, one of: Qt4, Qt5, gtk3, gtk2 (and obviously, none).

Since Buildroot does not support coexistence of Qt4 and Qt5, we
can no longer select one and depend on the other, like so:

    config BR2_PKG_OCV_WITH_QT4
        bool "Qt4"
        depends on !BR2_PKG_QT5
        select BR2_PKG_QT

    config BR2_PKG_OCV_WITH_QT5
        bool "Qt5"
        depends on !BR2_PKG_QT
        select BR2_PKG_QT5

otherwise, we'd get a circular dependency chain in Kconfig, which would
complain with:

  package/opencv/Config.in:57:error: recursive dependency detected!
  package/opencv/Config.in:57:    choice <choice> contains symbol BR2_PKG_OCV_WITH_QT5
  package/opencv/Config.in:111:   symbol BR2_PKG_OCV_WITH_QT5 depends on BR2_PKG_QT
  package/qt/Config.in:5: symbol BR2_PKG_QT is selected by BR2_PKG_OCV_WITH_QT
  package/opencv/Config.in:98:    symbol BR2_PKG_OCV_WITH_QT is part of choice <choice>

Instead, we need to depend on either Qt version.

So, to have a consistent choice, we make all support for GUI toolkits
actually depend on the toolkit, rather than select it.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[yann.morin.1998@free.fr: split-out the switch-selects-to-depends hunk
 from the add-qt5 hunk]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/opencv: add a choice for selecting the gui toolkit

In OpenCV, only one GUI toolkit may be used at any one time, so group
the two existing options into a choice to make this situation explicit.

This will also be useful when we later add support for Qt5 and gtk3.

Suggested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[yann.morin.1998@free.fr: tweak commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nodejs: security bump

Critical security flaw:
    https://medium.com/@iojs/important-security-upgrades-for-node-js-and-io-js-8ac14ece5852

Fixes #8201.

Reported-by: Chris Becker <goabonga@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nodejs: drop minor version in Config.in

Drop the minor version from the Kconfig symbol, so we can seamlessly
update the versions without having to handle legacy stuff.

Note: not adding legacy handling, as we haven't had any release with
those symbols yet.

Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Chris Becker <goabonga@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

imagemagick: bump to version 6.9.1-7

Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ntpd: drop unneeded uClibc workaround for refclock_pcf.c

refclock_pcf.c contains code using the tm_gmtoff member of struct tm, which
is only available on uClibc if it is built with __UCLIBC_HAS_TM_EXTENSIONS__.

This change date back to:

commit 7129da009cc72575a84a30c4587bd99f745c49d4
Author: Eric Andersen <andersen@codepoet.org>
Date:   Sat Jan 18 21:27:22 2003 +0000

    Merge a bunch of stuff over from the tuxscreen buildroot, with
    many updates to make things be more consistant.
     -Erik

But nowadays our uClibc configs DO enable __UCLIBC_HAS_TM_EXTENSIONS__, so
it is no longer needed and can be dropped.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

ntp: drop uselss patch fixup which sometimes breaks rebuild

Drop sed line which no longer changes anything as upstream has changed to
use strrchr.  Worse, it bumps each ntpd/*.c file's modification time, which
sometimes triggers a strange dependency path causing the makefile to attempt
to run the ntpd keyword-gen app, which fails, because it's been
cross-compiled.

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

wine: fix sane related build failure

If sane is installed system-wide on the build machine, then the
sane-config binary found is the one of the system, which returns
incorrect library paths for cross-compilation.

To fix this, this commit adds a patch to wine to make it support a
SANE_CONFIG environment variable, and then adjusts wine.mk to
explicitly pass the path to $(STAGING_DIR)/usr/bin/sane-config.

Fixes:

  http://autobuild.buildroot.org/results/8bd/8bdc1eed55075313403aa8a6c9af6a427bce198e/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>

samba4: install systemd files

The package comes with usable .service files for smbd, nmbd and
winbind, but does not install them.

[Thomas: use relative paths for the symbolic links.]

Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

upmpdcli: use relative path for systemd service symlink

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

squid: systemd support

squid comes with a .service file, but does not install it.

[Thomas: use relative path for symlink instead of absolute path.]

Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

upmpdcli: systemd support

Usable .service file is provided in the package.

Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/vlc: add opencv support

This change adds 2 patches (backported from upstream) to vlc fixing the
build against opencv2 APIs.
This allows to select the minimal set of opencv modules when opencv
support is enabled.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/opencv: add gstreamer-1.x support

Starting with the 2.4.10 release, OpenCV supports both Gstreamer-0.10
and Gstreamer-1, but only one can be enabled at the same time (OpenCV
chooses Gstreamer-1 over Gstreamer-0.10 when both are available).

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/opencv: add a choice for selecting gstreamer support

OpenCV 3.0 support both gstreamer-0.10 and gstreamer-1.x, but only one
is used at the time.

This patch turns the gstreamer support into a choice, in order to prepare
adding the support for gstreamer-1 in a following patch.

Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/ffmpeg: Fix i586 compilation with gcc5

In file included from libavcodec/cabac_functions.h:46:0,
                 from libavcodec/h264_cabac.c:37:
libavcodec/h264_cabac.c: In function 'ff_h264_decode_mb_cabac':
libavcodec/x86/cabac.h:192:5: error: 'asm' operand has impossible constraints
     __asm__ volatile(

To reproduce the bug use this defconfig:

BR2_GCC_VERSION_5_1_X=y
BR2_PACKAGE_FFMPEG=y
BR2_PACKAGE_FFMPEG_GPL=y
BR2_PACKAGE_FFMPEG_NONFREE=y
BR2_PACKAGE_FFMPEG_FFPLAY=y
BR2_PACKAGE_FFMPEG_FFSERVER=y
BR2_PACKAGE_FFMPEG_FFPROBE=y
BR2_PACKAGE_FFMPEG_AVRESAMPLE=y
BR2_PACKAGE_FFMPEG_POSTPROC=y

[Thomas: add a comment in the code.]

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

barebox: bump to version 2015.07.0

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

coreutils: bump to version 8.24

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

linux-headers: bump 3.{10,14}.x series

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

kvmtool: new package

Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

busybox: PAM support needs thread support

In commit f21b2558a097d07b53b6f20a47770468e9e4f7ed ("busybox: added
linux-pam support"), we added optional support for PAM in
Busybox. However, this support requires the toolchain to have thread
support, which causes build failures with non-thread capable
toolchains.

This commit therefore enables Busybox PAM support only if the
linux-pam package is available *and the toolchain has thread support.

Fixes:

  http://autobuild.buildroot.org/results/1a3/1a380aaca9303b67cc59165d56cf12f35966fe26/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

tor: needs NPTL threads

Fixes:

  http://autobuild.buildroot.org/results/f09/f09af8dd0d85bc6137a0c2f26cbe62686767b957/

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

core/pkg-generic: sanitise FOO_OVERRIDE_SRCDIR

In case FOO_OVERRIDE_SRCDIR has trailing spaces, like so:
    FOO_OVERRIDE_SRCDIR = /path/to/sources\x20

we would end up with a rsync command like so:
    rsync -au /path/to/sources / /path/to/build/foo

which would effectively rsync the whole vfs, eventually filling the
whole disk... :-(

So, just qstrip the variable before use.

Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

pkg-luarocks: fix top-level parallel makefile support

In the *-install-target phase the manifest file is being updated, if multiply packages try to update it they fail.

To avoid multiple access to the manifest file use flock to sync
multiple luarocks packages.

e.g. installing three luarocks packages:
make lua-cjson-build lua-coat-build lua-coatpersistent-build
make lua-cjson lua-coat lua-coatpersistent -j

Fix error:
Updating manifest for /home/tetsuya/buildroot/br2/output/target/usr/lib/luarocks/rocks
No existing manifest. Attempting to rebuild...

Error: rock_manifest file not found for lua-coat 0.9.1-1 - not a LuaRocks 2 tree?

[Thomas: get rid of LUAROCKS_RUN, and use LUAROCKS_RUN_ENV +
LUAROCKS_RUN_CMD everywhere.]

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

packages: fix and improve support for top-level parallel make

The boost and jack2 packages fail to build when PARALLEL_JOBS is empty
so instead of using an empty PARALLEL_JOBS don't use it in the MAKE
variable when top-level parallel make is being used.

To simplify the use of top-level parallel make, check the MAKEFLAGS
variable to know automatically if the -j option is being used, also use
the "=" operator instead of the ":=" operator because the MAKEFLAGS
variable can be checked only in a "recursively expanded variable".
The "override" keyword must be used in order to change the automatic
variable "MAKE".

When the top-parallel make is being used the sub-make are called without
specifying the "-j" option in order to let GNU make share the job slots
specified in the top make. This is done because GNU make is able
to share the job slots available between each instance of make so if you
want to increase the number of jobs you just need to increase the <jobs>
value in the top make -j<jobs> command.

If we specify the -j<jobs> option in each instance of make, it is less
efficient, e.g. in a processor with 8 cores we specify -j9 in each instance:
the number of processes goes up to 81 because each sub-make can execute
9 processes. The excessive number of processes is not a good thing
because in my tests even -j16 is slower than -j9.
Instead if we don't specify the -j<jobs> option in the sub-make, the top
make share the job slots automatically between each instance, so the
number of process in this examples goes up to 9 that is faster than
using up to 81 processes.

e.g. when the -j3 option is specified only in the top make:

possible state n. 1:
process 1 - <packagea>-build
process 2 - <packagea>-build
process 3 - <packagea>-build

possible state n. 2:
process 1 - <packagea>-extract
process 2 - <packageb>-configure
process 3 - <packagec>-build

possible state n. 3:
process 1 - <packagea>-build make -j1
process 2 - <packageb>-build make -j1
process 3 - <packagec>-build make -j1

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

board: add support for WarPboard

This is a set of patch to add support for warpboard
(Freescale board based on imx6sl)

The patch contains :
  - defconfig for warpboard
  - linux patches from Fabio Estevam to fix device tree due to last change on
  warpboard schematics (rev 1.12) and to fix kernel imx_v6_v7 defconfig which
  use incorrect hci protocol
  - specific firmware file for warpboard bluetooth
  nvram : brcmfmac4330-sdio.txt

Origin of nvram config file for wifi :
https://github.com/Freescale/meta-fsl-arm-extra

[Thomas: misc rewording/improvements in the README file.]

Signed-off-by: Arthur LAMBERT <arthur@dreem.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

configs/acmesystems_aria_g25: new configs

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

polarssl: security bump to version 1.2.14

Fixes one remotely-triggerable issue that was found by the Codenomicon
Defensics tool, one potential remote crash and countermeasures against
the "Lucky 13 strikes back" cache-based attack.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

harfbuzz: bump to version 0.9.41

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

isl: bump to version 0.14.1

Also add hash file.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

cloog: bump to version 0.18.3

Patch upstream so remove.
And add hash file.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nodejs: Define NPM command for other packages to use

Other nodejs-related packages will need to call npm with the same set of
arguments as is currently used by the nodejs package itself.

To avoid duplicating this code, set the NPM variable so those packages can
re-use it.

Signed-off-by: Martin Bark <martin@barkynet.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nodejs: Fixes for node-pre-gyp

Many packages use node-pre-gyp as a way of deploying precompiled binary
dependencies with fall back to compilation for other targets.  Currently
installing node modules that use node-pre-gyp can fail to use the correct
binary for the target.  This patch fixes this issue by correctly
configuring node-pre-gyp.

Firstly, node-gyp uses the option --arch to determine its target
architecture (which is already set correctly), however, node-pre-gyp uses
--target-arch.  Without this set node.js packages that uses node-pre-gyp
will pick the wrong target architecture.

Secondly, the use of precompiled binary packages is not desirable due to
potential security and licensing issues.  To solve this we use the
--build-from-source option to force node-pre-gyp to always build the C++
code.

This patch passes npm_config_target_arch and npm_config_build_from_source
to npm which causes --target-arch and --build-from-source to be passed to
node-pre-gyp.

I have tested this using the node.js package serialport which now
successfully builds and runs.

Signed-off-by: Martin Bark <martin@barkynet.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nodejs: symlink /usr/lib/node_modules/.bin/* to /usr/bin

This patch symlinks all executables in /usr/lib/node_modules/.bin
to /usr/bin so that node.js modules installed using
BR2_PACKAGE_NODEJS_MODULES_ADDITIONAL are accessible from the command line.

Signed-off-by: Martin Bark <martin@barkynet.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/nodejs: Add node.js v0.12.5 and set as the default version

The version of the V8 JavaScript engine used by node.js v0.12.5 requires
at least an ARMv6 architecture with VFPv2.  For this reason v0.10.39
remains the default for ARMv5 targets, all other targets now default to
v0.12.5.

Signed-off-by: Martin Bark <martin@barkynet.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ltrace: enable for mips/mipsel

ltrace was disabled for MIPS due to a build failure on this
architecture. Now that problem has been fixed so we can enable this
package again.

Related:
http://git.buildroot.net/buildroot/commit/?id=dfaa18af00dfcff71a0159adaafb0880e58fa6a1
http://anonscm.debian.org/cgit/collab-maint/ltrace.git/commit/?id=a8ff0ff2b6e6c229f8a9242828fb47f1a5a78967

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

ltrace: update to current master

Lots of fixes have been made to ltrace, including the ones for fixing a
build failure for MIPS architecture. Updating to current master will
allow us to re-enable this package for MIPS and also remove some
upstreamed patches.

At the same time we add a patch made by Jérôme Pouiller to fix a bug
introduced by 5ba9e10 ("Split type definitions from the bundled configs
into their own files"). Two new configuration files are not installed.
Therefore, ltrace fail with messages like :

/usr/share/ltrace/libm.so.conf:333: error: unknown type around 'ldouble
erfl(ldouble);

That patch has been sent upstream.

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/openvmtools: bump to version 9.10.2

Signed-off-by: Karoly Kasza <kaszak@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libdrm: fix building if GCC's C standard is not gnu99

Fixes
checking for /home/fli4l/buildroot/output/host/usr/bin/i586-buildroot-linux-uclibc-gcc option to accept ISO C99... unsupported
configure: error: Building libdrm requires C99 enabled compiler

using this defconfig
BR2_KERNEL_HEADERS_4_0=y
BR2_BINUTILS_VERSION_2_25=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_LIBDRM=y

Patch inspired by
http://git.buildroot.net/buildroot/commit/?id=5cf5b390385fb6325485e37dc9d38e1e3ac1f091

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

cryptsetup: remove e2fsprogs dependency

cryptsetup does not actually depend on e2fsprogs, but on libuuid that is a
dependency of e2fsprogs. Remove the e2fsprogs dependency, and add a direct
dependency on util-linux (libuuid provider).

Cc: Martin Hicks <mort@bork.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

system: allow/disallow root login, accept encoded passwords

Currently, there are only two possibilities regarding the root account:
  - it is enabled with no password (the default)
  - it is enabled, using a clear-text, user-provided password

This is deemed insufficient in many cases, especially when the .config
file has to be published (e.g. for the GPL compliance, or any other
reason.).

Fix that in two ways:

  - add a boolean option that allows/disallows root login altogether,
    which defaults to 'y' to keep backward compatibility;

  - accept already-encoded passwords, which we recognise as starting
    with either of $1$, $5$ or $6$ (resp. for md5, sha256 or sha512).

Signed-off-by: Lorenzo M. Catucci <lorenzo@sancho.ccd.uniroma2.it>
[yann.morin.1998@free.fr:
  - don't add a choice to select between clear-text/encoded password,
    use a single prompt;
  - differentiate in the password hook itself;
  - rewrite parts of the help entry;
  - rewrite and expand the commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: "Lorenzo M. Catucci" <lorenzo@sancho.ccd.uniroma2.it>
Acked-by: "Lorenzo M. Catucci" <lorenzo@sancho.ccd.uniroma2.it>
Tested-by: Gergely Imreh <imrehg@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libtool: disable makeinfo

host-libtool can fail to build if the host is missing makeinfo, so
disable it.

Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi: Fix egl/gles compilation with mesa3d and disabled X.org

In this case -DMESA_EGL_NO_X11_HEADERS is needed during compilation.

Fixes this build error

make[1]: Entering directory `/home/fli4l/br8_kodi/output/build/kodi-14.2-Helix/xbmc/cores/dvdplayer'
CPP     xbmc/cores/dvdplayer/DVDPlayerVideo.o
In file included from /home/fli4l/br8_kodi/output/host/usr/i586-buildroot-linux-uclibc/sysroot/usr/include/EGL/egl.h:36:0,
                 from /home/fli4l/br8_kodi/output/build/kodi-14.2-Helix/xbmc/windowing/egl/WinSystemEGL.h:28,
                 from /home/fli4l/br8_kodi/output/build/kodi-14.2-Helix/xbmc/windowing/WindowingFactory.h:39,
                 from DVDPlayerVideo.cpp:23:
/home/fli4l/br8_kodi/output/host/usr/i586-buildroot-linux-uclibc/sysroot/usr/include/EGL/eglplatform.h:118:22: fatal error: X11/Xlib.h: No such file or directory
 #include <X11/Xlib.h>
                      ^
using this defconfig

BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_PACKAGE_KODI=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_OPENGL_EGL=y
BR2_PACKAGE_MESA3D_OPENGL_ES=y

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/kodi: Remove hyperflous option --disable-dvdcss

The option is controlled later on inside this if-clause

ifeq ($(BR2_PACKAGE_KODI_OPTICALDRIVE),y)

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libv4l: fix uclibc-ng configure/compile

With raspberrypi_defconfig:

  libv4l2rds.c:256:2: error: 'for' loop initial declarations are only allowed in C99 or C11 mode
    for (int i = 0; i < tuning->station_cnt; i++) {
    ^
  libv4l2rds.c:256:2: note: use option -std=c99, -std=gnu99, -std=c11 or -std=gnu11 to compile your code

>From build/libv4l-1.6.2/config.log:

configure:4709: checking for .../host/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc option to accept ISO C99
configure:4858: .../host/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc -std=gnu99 -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64   -Os  -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5
conftest.c:54:9: error: unknown type name 'wchar_t'
   const wchar_t *name;

The C99 detection problem seems more related to missing wchar_t type support than the compiler option?

Adding LIBV4L_CONF_ENV = ac_cv_prog_cc_c99='-std=c99' gives a lot of compile errors like:

libv4lconvert.c: In function 'dev_ioctl':
processing/../libv4lsyscall-priv.h:85:10: error: 'SYS_ioctl' undeclared (first use in this function)
  syscall(SYS_ioctl, (int)(fd), (unsigned long)(cmd), (void *)(arg))
          ^
libv4lconvert.c:43:9: note: in expansion of macro 'SYS_IOCTL'
  return SYS_IOCTL(fd, cmd, arg);
         ^
processing/../libv4lsyscall-priv.h:85:10: note: each undeclared identifier is reported only once for each function it appears in
  syscall(SYS_ioctl, (int)(fd), (unsigned long)(cmd), (void *)(arg))
          ^
libv4lconvert.c:43:9: note: in expansion of macro 'SYS_IOCTL'
  return SYS_IOCTL(fd, cmd, arg);
         ^

Adding LIBV4L_CONF_ENV = ac_cv_prog_cc_c99='-std=gnu99' solves all configure/compile errors.

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

libv4l: bump version to 1.6.3

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

powerpc: disable binutils 2.24 for little endian

Binutils 2.24 produces broken code when compiling the kernel for
ppc64le, so prevent this combination. See:

https://sourceware.org/ml/binutils/2013-12/msg00200.html

The problem manifests early in the boot process with "Kernel access of
bad area, sig: 11" in arch_match_cpu_phys_id().

The fix has been merged upstream as commit
57fa7b8c7e59e35bced580f9bcb9668af43fdbce, which is available since
Binutils 2.25.

Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Disable gcc-4.8.x + binutils-2.25 + MIPS combination

This combination causes a compilation failure of the host-gcc-final
recipe like this one:

/br/output/host/usr/mips-buildroot-linux-gnu/bin/ld:
.libs/gload.o: relocation R_MIPS_HI16 against `__gnu_local_gp' can not
be used when making a shared object; recompile with -fPIC

The problem is the file 'libatomic/gload.c' is compiled without -fPIC
when using binutils-2.25. All gcc (with libatomic) versions below 4.9.3
are affected by this issue.

Here is a summary of affected/unaffected versions in Buildroot:

4.7.x: unaffected (doesn't have libatomic)
4.8.x: affected
4.9.x: unaffected (we have 4.9.3 which is fixed)
5.1.x: unaffected

The fix can be found here:

  https://github.com/gcc-mirror/gcc/commit/57f5c0954f95cb37f995d60167ddde06c7d6e697

However, given the following reasons...

- Upstream gcc 4.8 branch is closed.
- The fix is very hard to backport from 4.9 to 4.8.
- This stuff is insanely sensitive and not working at all could be
  better than looking like it works but not quite.

...I think the best choice is to disable that combination in Buildroot.

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

tor: explain why we use -std=gnu99

[Missed from 5cf5b390 (fix building if GCC's C standard is not gnu99)]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

python-networkmanager: bump to version 0.9.13

[Peter: fix upstream hash link]
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/gcc: fix ARC failure to build in 2 phases.

When working with GCC initial at override source dir mode the
HOST_GCC_INITIAL_POST_PATCH_HOOKS is not called and compilation failes.
The solution is to use HOST_GCC_INITIAL_POST_RSYNC_HOOKS since this hook
is being called at override source dir mode.

Signed-off-by: Tal Zilcer <talz@ezchip.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

rapidjson: update site URL in package description

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

rapidjson: bump to version 1.0.2

Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

cryptsetup: update homepage link

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

cryptsetup: bump to version 1.6.7

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

valgrind: install to staging

This is necessary for some packages depending on valgrind, such as
libdrm which will fail with an error like this one:

checking for VALGRIND... no
checking whether to enable Valgrind support... configure: error:
Valgrind support required but not present
package/pkg-generic.mk:146: recipe for target
'/br/output/build/libdrm-2.4.62/.stamp_configured' failed

Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

tor: fix building if GCC's C standard is not gnu99

Up to date tor (at least starting from 0.2.6) requires compiler with C99
plus some extensions support.

If default GCC's C standard < c99 (that's the case at least for ARC)
you'll see this on attempt to build tor:
----------------------->8--------------------
src/common/address.c: In function ''tor_addr_parse_PTR_name':
src/common/address.c:502:5: error: 'for' loop initial declarations are only allowed in C99 mode
     for (int i = 0; i < 16; ++i) {
     ^
src/common/address.c:502:5: note: use option -std=c99 or -std=gnu99 to compile your code
----------------------->8--------------------

Once you follow compiler advice and enable c99 support with "-std=c99"
you'll pass that failure but will see tons of other errors, see
https://www.mail-archive.com/tor-dev@lists.torproject.org/msg06273.html

And only g99 resolves all problems at once.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

gnupg: add option for AES cipher

Similar to our RSA option. Enabling this adds ~17K to the gpg binary (ARMv7):

ls -lah output/target/usr/bin/gpg{.orig,}
-rwxr-xr-x 1 peko peko 532K Jul  2 17:29 output/target/usr/bin/gpg
-rwxr-xr-x 1 peko peko 515K Jul  2 17:29 output/target/usr/bin/gpg.orig

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

package/modem-manager: init script for systemV-like init systems

ModemManager get started by NetworkManager, in case of systemd init
system. In case of other systems it needs to be started by init script.

Debian [1] solved it by detection in code. For Buildroot it's IMHO
enough to install init script for systemV-like init systems.

[1] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=770871

[Thomas:
 - slightly simplify the script by removing the MODEMMANAGER_BIN
   variable which was used at only one place, and use directly $?
   instead of an intermediate $ret variable.
 - split the too long line added in the .mk file.]

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/eudev: bump version to 3.1.2

[Thomas: added locally calculated sha256 hash, as suggested by Yann.]

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libdrm: bump version to 2.4.62

Added support for newly added optional valgrind support:
http://cgit.freedesktop.org/mesa/drm/commit/?id=47a2de27a0f087908e3063fdd6dfdececd2db75b

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libva-intel-driver: bump version to 1.6.0

Upstream hash is in sha1 format, like before. It is wrongly announced
as md5 in the release mail, so I added a note to the hash file.

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/libva: bump version to 1.6.0

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/{mesa3d, mesa3d-headers}: bump version to 10.6.1

Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

package/rpi-firmware: add option to install vcdbg

vcdbg is a tool to help debug the communication with the GPU.
It comes as a binary-only, and in two flavours: one for the hard
floating point ABI, one for the software floating point ABI.

Unfortunately, we have no source code for that tool, only a binary that
was dynamically linked with glibc and libraries from rpi-userland.

So, just install that executable, and let's hope there is no symbol
issue at runtime.

Note: vcdbg needs glibc, threads and !static. Since glibc already
implies threads and !static, we only need to depend on glibc.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc; Floris Bos <bos@je-eigen-domein.nl>
Cc: Pascal de Bruijn <pmjdebruijn@pcode.nl>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>