Thomas Petazzoni [Wed, 27 Nov 2019 20:36:48 +0000 (21:36 +0100)]
package/nodejs: properly pass HOST_LDFLAGS when building host tools
After building host tools, we currently run a pass of patchelf to add
the proper RPATH to these tools so that they are able to find the
libraries they depend on.
Unfortunately, the "torque" host tool is used during the build itself,
before we have a chance to run "patchelf" on it. Since it is linked
against libcrypto.so available in $(HOST_DIR)/lib, the build aborts
because the RPATH is not set.
To fix this, we make sure that $(HOST_LDFLAGS) are properly taken into
account: since they contain the -Wl,-rpath option, the host tools will
have the correct RPATH. This both fixes the build failure, and makes
the patchelf hack no longer necessary.
Fixes:
https://bugs.busybox.net/show_bug.cgi?id=12211
http://autobuild.buildroot.net/results/
a1f5e336ddaf386ba08eb5a7a299a48e2bdfe2d9/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Wed, 27 Nov 2019 20:36:47 +0000 (21:36 +0100)]
package/nodejs: use --with-arm-fpu option on ARM
nodejs can use some FPU instructions on ARM, but it needs to know that
thanks to the --with-arm-fpu option. Without this, it may use the
wrong FPU setting, such as use VFPv3 even if only a VFPv3-D16 is
available. This has been reported as bug #12166, where the compiled
node binary had some floating point instructions using floating point
registers above 16 on a VFPv3-D16 system.
This commit makes sure we pass the appropriate --with-arm-fpu value
when it makes sense. Note that NodeJS only has explicit support for a
subset of the FPUs, for the ones that are not explicitly supported, we
simply pass no --with-arm-fpu value.
Fixes:
https://bugs.busybox.net/show_bug.cgi?id=12166
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thomas Petazzoni [Wed, 27 Nov 2019 20:36:46 +0000 (21:36 +0100)]
package/nodejs: properly pass the --with-arm-float-abi on ARM
When commit
0064132ba032da39cefa4fffe59c31a71d1f1ddb introduced ARM64
support in nodejs.mk, it incorrectly kept the NODEJS_ARM_FP
definition. This variable is used to pass --with-arm-float-abi, which
in NodeJS's configure.py script is only used when --dest-cpu=arm, and
not when --dest-cpu=arm64.
So we are passing --with-arm-float-abi=<something> for ARM64, which
has no effect, and we are no longer passing it on ARM.
This commit fixes that by putting the NODEJS_ARM_FP definition back at
the right location.
Fixes:
0064132ba032da39cefa4fffe59c31a71d1f1ddb
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Michael Vetter [Wed, 27 Nov 2019 12:52:45 +0000 (13:52 +0100)]
package/libstrophe: bump to version 0.9.3
Changes:
* PLAIN mechanism is used only when no other mechanisms are supported
* Legacy authentication is disabled by default, can be enabled with
connection flag XMPP_CONN_FLAG_LEGACY_AUTH
* Session is not established if it is optional
* Fixed a bug causing a reused connection not to cleanup properly
* Improved debug logging in OpenSSL module
* Few memory leaks fixed
Signed-off-by: Michael Vetter <jubalh@iodoru.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Mark Corbin [Thu, 28 Nov 2019 11:49:44 +0000 (11:49 +0000)]
package/liberation: add an upstream URL to Config.in
Add an upstream URL to the help text in Config.in. This
addresses the 'Missing' URL status in the package stats
web page output.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Mark Corbin [Thu, 28 Nov 2019 11:43:41 +0000 (11:43 +0000)]
package/libdvdnav: update the upstream URL in Config.in
Update the upstream URL in the help text in Config.in as it
is pointing to an old page.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Mark Corbin [Thu, 28 Nov 2019 11:36:29 +0000 (11:36 +0000)]
package/libdvdread: update the upstream URL in Config.in
Update the upstream URL in the help text in Config.in. This
addresses the 'Invalid(404)' URL status in the package stats
web page output.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Mark Corbin [Thu, 28 Nov 2019 11:28:14 +0000 (11:28 +0000)]
package/libbson: add an upstream URL to Config.in
Add an upstream URL to the help text in Config.in. This
addresses the 'Missing' URL status in the package stats
web page output.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Mark Corbin [Thu, 28 Nov 2019 11:13:12 +0000 (11:13 +0000)]
package/libass: update the upstream URL in Config.in
Update the upstream URL in the help text in Config.in. This
addresses the 'Invalid(405)' URL status in the package stats
web page output.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Mark Corbin [Thu, 28 Nov 2019 11:07:18 +0000 (11:07 +0000)]
package/leafnode2: update the upstream URL in Config.in
Update the upstream URL in the help text in Config.in. This
addresses the 'Invalid(Err)' URL status in the package stats
web page output.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Mark Corbin [Thu, 28 Nov 2019 10:48:20 +0000 (10:48 +0000)]
package/kf5: add an upstream URL to Config.in
Add an upstream URL to the help text in Config.in. This
addresses the 'Missing' URL status in the package stats
web page output.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yann E. MORIN [Sat, 16 Nov 2019 09:10:04 +0000 (10:10 +0100)]
system: allow not setting a default, system-wide time zone
It is valid that there is no system-wide default time zone defined, in
which case Etc/UTC is assumed.
Fixes: #12316
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Martin Bark <martin@barkynet.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Richard Braun <rbraun@sceen.net>
Cc: Andrew Trapani <andrew.trapani@ontera.bio>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Seiderer [Mon, 25 Nov 2019 20:55:20 +0000 (21:55 +0100)]
package/libdrm: fix nouveau tests compile for musl
Add openembedded provided patch [2] to fix musl toolchain compile failures
because of different ioctl() signatures, (int, int, ...) vs. (int, unsigned
long, ...).
Fixes:
../tests/nouveau/threaded.c:39:5: error: conflicting types for 'ioctl'
int ioctl(int fd, unsigned long request, ...)
[1] http://autobuild.buildroot.net/results/
047f149a928ac2a17e25211a0a8a264ebae369ac
[2] https://github.com/openembedded/openembedded-core/blob/master/meta/recipes-graphics/drm/libdrm/musl-ioctl.patch
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mark Corbin [Tue, 26 Nov 2019 12:06:45 +0000 (12:06 +0000)]
package/c-capnproto: add an upstream URL to Config.in
Add an upstream URL to the help text in Config.in. This
addresses the 'Missing' URL status in the package stats
web page output.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mark Corbin [Tue, 26 Nov 2019 19:46:35 +0000 (19:46 +0000)]
package/kexec-lite: add an upstream URL to Config.in
Add an upstream URL to the help text in Config.in. This
addresses the 'Missing' URL status in the package stats
web page output.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mark Corbin [Tue, 26 Nov 2019 19:36:32 +0000 (19:36 +0000)]
package/iw: update the upstream URL in Config.in
Update the upstream URL in the help text in Config.in. This
addresses the 'Invalid(404)' URL status in the package stats
web page output.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mark Corbin [Tue, 26 Nov 2019 19:18:59 +0000 (19:18 +0000)]
package/ifenslave: update the upstream URL in Config.in
Update the upstream URL in the help text in Config.in. This
addresses the 'Invalid(404)' URL status in the package stats
web page output.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mark Corbin [Tue, 26 Nov 2019 19:01:44 +0000 (19:01 +0000)]
package/hicolor-icon-theme: add an upstream URL to Config.in
Add an upstream URL to the help text in Config.in. This
addresses the 'Missing' URL status in the package stats
web page output.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mark Corbin [Tue, 26 Nov 2019 18:54:19 +0000 (18:54 +0000)]
package/gtkperf: add an upstream URL to Config.in
Add an upstream URL to the help text in Config.in. This
addresses the 'Missing' URL status in the package stats
web page output.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mark Corbin [Tue, 26 Nov 2019 16:12:08 +0000 (16:12 +0000)]
package/gr-osmosdr: add an upstream URL to Config.in
Add an upstream URL to the help text in Config.in. This
addresses the 'Missing' URL status in the package stats
web page output.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mark Corbin [Tue, 26 Nov 2019 15:57:39 +0000 (15:57 +0000)]
package/gqview: update the upstream URL in Config.in
Update the upstream URL in the help text in Config.in. This
addresses the 'Invalid(404)' URL status in the package stats
web page output.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mark Corbin [Tue, 26 Nov 2019 15:46:24 +0000 (15:46 +0000)]
package/glib-networking: add an upstream URL to Config.in
Add an upstream URL to the help text in Config.in. This
addresses the 'Missing' URL status in the package stats
web page output.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mark Corbin [Tue, 26 Nov 2019 15:24:43 +0000 (15:24 +0000)]
package/fswebcam: update the upstream URL in Config.in
Update the upstream URL in the help text in Config.in. This
addresses the 'Invalid(Err)' URL status in the package stats
web page output.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mark Corbin [Tue, 26 Nov 2019 15:00:28 +0000 (15:00 +0000)]
package/fmt: add an upstream URL to Config.in
Add an upstream URL to the help text in Config.in. This
addresses the 'Missing' URL status in the package stats
web page output.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mark Corbin [Tue, 26 Nov 2019 14:54:42 +0000 (14:54 +0000)]
package/flashbench: update the upstream URL in Config.in
Update the upstream URL in the help text in Config.in. This
addresses the 'Invalid(404)' URL status in the package stats
web page output.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mark Corbin [Tue, 26 Nov 2019 14:07:26 +0000 (14:07 +0000)]
package/fastd: update the upstream URL in Config.in
Update the upstream URL in the help text in Config.in. This
addresses the 'Invalid(404)' URL status in the package stats
web page output.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Acked-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mark Corbin [Tue, 26 Nov 2019 13:55:13 +0000 (13:55 +0000)]
package/faifa: update the upstream URL in Config.in
Update the upstream URL in the help text in Config.in. This
addresses the 'Invalid(Err)' URL status in the package stats
web page output.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mark Corbin [Tue, 26 Nov 2019 13:43:30 +0000 (13:43 +0000)]
package/elf2flt: add an upstream URL to Config.in.host
Add an upstream URL to the help text in Config.in.host. This
addresses the 'Missing' URL status in the package stats
web page output.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mark Corbin [Tue, 26 Nov 2019 12:24:36 +0000 (12:24 +0000)]
package/ca-certificates: update the upstream URL in Config.in
Update the upstream URL in the help text in Config.in. This
addresses the 'Invalid(404)' URL status in the package stats
web page output.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mark Corbin [Tue, 26 Nov 2019 12:34:56 +0000 (12:34 +0000)]
package/cog: add an upstream URL to Config.in
Add an upstream URL to the help text in Config.in. This
addresses the 'Missing' URL status in the package stats
web page output.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mark Corbin [Tue, 26 Nov 2019 12:45:28 +0000 (12:45 +0000)]
package/copas: update the upstream URL in Config.in
Update the upstream URL in the help text in Config.in. This
addresses the 'Invalid(406)' URL status in the package stats
web page output.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mark Corbin [Tue, 26 Nov 2019 12:54:31 +0000 (12:54 +0000)]
package/dmraid: add an upstream URL to Config.in
Add an upstream URL to the help text in Config.in. This
addresses the 'Missing' URL status in the package stats
web page output.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mark Corbin [Tue, 26 Nov 2019 13:20:55 +0000 (13:20 +0000)]
package/doom-wad: add an upstream URL to Config.in
Add an upstream URL to the help text in Config.in. This
addresses the 'Missing' URL status in the package stats
web page output.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
James Byrne [Tue, 26 Nov 2019 09:52:04 +0000 (09:52 +0000)]
package/minicom: make default port and lock directory fixed defaults
Minicom's configure script will set values for the default port and lock
directory based on the configuration of the host machine, which is not
useful for cross-compiling or reproducible builds, so instead set them
to sensible default values.
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bartosz Bilas [Mon, 25 Nov 2019 07:03:19 +0000 (08:03 +0100)]
package/libftdi: don't override license files variable
Fixes:
package/libftdi/libftdi.mk:22: conditional override of variable LIBFTDI_LICENSE_FILES
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mark Corbin [Mon, 25 Nov 2019 20:36:58 +0000 (20:36 +0000)]
package/bind: update the upstream URL in Config.in
Update the upstream URL in the help text in Config.in. This
addresses the 'Invalid(404)' URL status in the package stats
web page output.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mark Corbin [Mon, 25 Nov 2019 20:24:39 +0000 (20:24 +0000)]
package/bcg729: update the upstream URL in Config.in
Update the upstream URL in the help text in Config.in. This
addresses the 'Invalid(404)' URL status in the package stats
web page output.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mark Corbin [Mon, 25 Nov 2019 20:05:48 +0000 (20:05 +0000)]
package/atk: add an upstream URL to Config.in
Add an upstream URL to the help text in Config.in. This
addresses the 'Missing' URL status in the package stats
web page output.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Mon, 25 Nov 2019 18:54:05 +0000 (19:54 +0100)]
{linux, linux-headers}: bump 4.{4, 9, 14, 19}.x / 5.3.x series
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Seiderer [Mon, 25 Nov 2019 15:12:29 +0000 (16:12 +0100)]
package/libdrm: disable nouveau test for static build
Fixes:
[46/66] Compiling C object 'tests/nouveau/
e47a46e@@threaded@exe/threaded.c.o'.
FAILED: tests/nouveau/
e47a46e@@threaded@exe/threaded.c.o
./tests/nouveau/threaded.c:24:10: fatal error: dlfcn.h: No such file or directory
#include <dlfcn.h>
[1] http://autobuild.buildroot.net/results/
3042637f54d2d232904ea009455cae82e159ea2e
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Korsgaard [Sun, 24 Nov 2019 21:23:09 +0000 (22:23 +0100)]
package/jpeg-turbo: security bump to version 2.0.3
Fixes the following security vulnerabilities:
- CVE-2019-2201: In generate_jsimd_ycc_rgb_convert_neon of
jsimd_arm64_neon.S, there is a possible out of bounds write due to a
missing bounds check. This could lead to remote code execution in an
unprivileged process with no additional execution privileges needed.
For more details, see the upstream bugtracker:
https://github.com/libjpeg-turbo/libjpeg-turbo/issues/361
Additionally, it fixes a number of other issues. From the release notes:
- Fixed a regression in the SIMD feature detection code, introduced by the
AVX2 SIMD extensions (2.0 beta1[1]), that was known to cause an illegal
instruction exception, in rare cases, on CPUs that lack support for CPUID
leaf 07H (or on which the maximum CPUID leaf has been limited by way of a
BIOS setting.)
- The 4:4:0 (h1v2) fancy (smooth) chroma upsampling algorithm in the
decompressor now uses a similar bias pattern to that of the 4:2:2 (h2v1)
fancy chroma upsampling algorithm, rounding up or down the upsampled
result for alternate pixels rather than always rounding down. This
ensures that, regardless of whether a 4:2:2 JPEG image is rotated or
transposed prior to decompression (in the frequency domain) or after
decompression (in the spatial domain), the final image will be similar.
- Fixed a regression introduced by 2.0 beta1[15] whereby attempting to
generate a progressive JPEG image on an SSE2-capable CPU using a scan
script containing one or more scans with lengths divisible by 16 would
result in an error ("Missing Huffman code table entry") and an invalid
JPEG image.
- Fixed an issue whereby tjDecodeYUV() and tjDecodeYUVPlanes() would throw
an error ("Invalid progressive parameters") or a warning ("Inconsistent
progression sequence") if passed a TurboJPEG instance that was previously
used to decompress a progressive JPEG image.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Sun, 24 Nov 2019 20:59:17 +0000 (21:59 +0100)]
package/bind: security bump to version 9.11.13
Fixes the following security vulnerabilities:
- CVE-2019-6477: TCP-pipelined queries can bypass tcp-clients limit
For details, see the release notes:
https://downloads.isc.org/isc/bind9/9.11.13/RELEASE-NOTES-bind-9.11.13.html
(9.11.11..12 were not released)
Upstream moved to a 2019-2020 signing key, so update comment in hash file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Giulio Benetti [Mon, 25 Nov 2019 10:50:40 +0000 (11:50 +0100)]
package/libnss: security bump to version 3.47.1
Fixes the following security issues:
CVE-2019-11745: EncryptUpdate should use maxout, not block size
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabrice Fontaine [Sun, 24 Nov 2019 18:01:57 +0000 (19:01 +0100)]
package/libftdi1: fix license
The GPL only applies to the C++ bindings and eeprom utility, which are
conditionally enabled with BR2_PACKAGE_LIBFTDI1_LIBFTDIPP1 and
BR2_PACKAGE_LIBFTDI1_FDTI_EEPROM, respectively.
The COPYING.LIB is indeed the LGPL-2.0, but the source file for
libftdi1 states LGPL-2.1-only, see src/ftdi.c
The src/ftdi_stream.c also bears a notice of the MIT license, so the
library itself is under both LGPL-2.1-only and MIT.
Note: the COPYING.GPL license file may get added twice to the list, but
that is not a problem in practice: it is just copied twice.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
- GPL-2.0 also applies to the ftdi_eeprom utility
- s/ftdipp1/libftdipp1/
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Yann E. MORIN [Sun, 24 Nov 2019 21:12:57 +0000 (22:12 +0100)]
package/libftdi: remove unused license
Commit
9b0b15e90b (package/libftdi: add license) was too hastily fixed,
with confusion between libftdi and libftdi1. The MIT-licensed file is
not present in libftdi; it is only in libftdi1.
Remove the unused MIT license from the list.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fabrice Fontaine [Sun, 24 Nov 2019 19:07:28 +0000 (20:07 +0100)]
package/systemd: fix license hash
Bump to 243.4 forgot to update hash of README file (update to the
requirements).
Fixes:
- http://autobuild.buildroot.org/results/
eae13046b90253cdb2bf260e10b316386dff4eb1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: explain why README was changed]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fabrice Fontaine [Sun, 24 Nov 2019 10:08:46 +0000 (11:08 +0100)]
package/libftdi: add license
The COPYING.LIB license file contains the test of the LGPL-2.0, but the
source code itself explicitly refers to the GPL-2.1-only. Additionally,
parts of the library (src/ftdi_stream.c) are under the MIT license.
The C++ bindings are udner the GPL-2.0-only with an exception, which is
expressed in the LICENSE file.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
- the library is under both GPL-2.1-only and MIT
- the GPL-2.0-only only applies to the C++ bindings
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fabrice Fontaine [Sun, 24 Nov 2019 09:10:51 +0000 (10:10 +0100)]
package/gob2: add license
gob2 itself is GPL-2.0+, but it is a code generator. The code generated
by gob2 id not covered by gob2's license, and this is made explicit in
an accompanying license file.
So we include both license files.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
- add COPYING.generated-code
- expand commit log accordingly
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Peter Korsgaard [Sun, 24 Nov 2019 10:15:16 +0000 (11:15 +0100)]
Update for 2019.11-rc3
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabrice Fontaine [Sat, 23 Nov 2019 23:05:28 +0000 (00:05 +0100)]
package/tftpd: add license
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Thomas Petazzoni [Mon, 18 Nov 2019 21:10:46 +0000 (22:10 +0100)]
package/faifa: fix incorrect library symlink
As spotted in
http://autobuild.buildroot.net/results/a61/
a612cb7a85927d8cfe55c95c34d2901e7694fab0//diffoscope-results.txt,
faifa installs a library symlink with an incorrect target, which was
detected by the reproducible build logic, but is in fact wrong in any
case:
-lrwxrwxrwx 0 0 0 0 2019-11-07 19:38:04.000000 ./usr/lib/libfaifa.so -> /home/naourr/work/instance-3/output-1/target/usr/lib/libfaifa.so.0
+lrwxrwxrwx 0 0 0 0 2019-11-07 19:38:04.000000 ./usr/lib/libfaifa.so -> /home/naourr/work/instance-3/output-2/target/usr/lib/libfaifa.so.0
In practice, this is not a problem at runtime, as the .so symlink is
not used: the library soname is libfaifa.so.0. However, it still makes
sense to fix.
It is fixed by backporting an upstream commit. We considered bumping
to a newer version, but the latest version requires a new dependency
(libevent), so we preferred the backporting approach.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Jérémy Rosen [Tue, 19 Nov 2019 20:23:35 +0000 (21:23 +0100)]
package/systemd: bump to v243.4
Upstream systemd-stable has started tagging point releses.
The commit we currently used has now been tagged as v243.3, and this
brings us to v243.4.
Signed-off-by: Jérémy Rosen <jeremy.rosen@smile.fr>
[yann.morin.1998@free.fr:
- expand commit log to explain previous version
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Titouan Christophe [Sat, 23 Nov 2019 20:01:42 +0000 (21:01 +0100)]
package/redis: bump to version 5.0.7
Changes announced upstream:
Upgrade urgency HIGH: many issues fixed, some may have an impact.
Redis 5.0.7 fixes a number of bugs, none is very critical, however
there are a few that may have an impact. It's a good idea to upgrade.
There are fixes in the area of replication from modules commands and
callbacks, AOF fsync (non critical issue), memory leaks (very rare and small),
streams beahvior (non critical), and a potential crash in commands
processing multiple keys at the same time that is there for years, and happens
very rarely, but is not impossible to trigger.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Fri, 22 Nov 2019 22:55:31 +0000 (23:55 +0100)]
package/asterisk: security bump to version 16.6.2
Fixes the following security vulnerabilities:
AST-2019-006: SIP request can change address of a SIP peer.
A SIP request can be sent to Asterisk that can change a SIP peer’s IP
address. A REGISTER does not need to occur, and calls can be hijacked as a
result. The only thing that needs to be known is the peer’s name;
authentication details such as passwords do not need to be known. This
vulnerability is only exploitable when the “nat” option is set to the
default, or “auto_force_rport”.
https://downloads.asterisk.org/pub/security/AST-2019-006.pdf
AST-2019-007: AMI user could execute system commands.
A remote authenticated Asterisk Manager Interface (AMI) user without
“system” authorization could use a specially crafted “Originate” AMI request
to execute arbitrary system commands.
https://downloads.asterisk.org/pub/security/AST-2019-007.pdf
AST-2019-008: Re-invite with T.38 and malformed SDP causes crash.
If Asterisk receives a re-invite initiating T.38 faxing and has a port of 0
and no c line in the SDP, a crash will occur.
https://downloads.asterisk.org/pub/security/AST-2019-008.pdf
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Adam Duskett [Sat, 23 Nov 2019 17:46:55 +0000 (09:46 -0800)]
package/zip: add license hash
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Adam Duskett [Sat, 23 Nov 2019 17:46:54 +0000 (09:46 -0800)]
package/perl: add license hash
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fabrice Fontaine [Sun, 17 Nov 2019 16:44:52 +0000 (17:44 +0100)]
package/spice: security bump to version 0.14.2
- Fix CVE-2019-3813: fix off-by-one error in group/slot boundary check
- Add license hash
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fabrice Fontaine [Sun, 17 Nov 2019 16:44:51 +0000 (17:44 +0100)]
package/spice-protocol: bump to version 0.14.0
- This bump is needed for spice 0.14.2
- Add license hash
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bernd Kuhls [Thu, 21 Nov 2019 21:37:33 +0000 (22:37 +0100)]
package/php: bump version to 7.3.12
Release notes of this bugfix release:
https://www.php.net/ChangeLog-7.php#7.3.12
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adrian Perez de Castro [Fri, 22 Nov 2019 18:00:13 +0000 (20:00 +0200)]
package/webkitgtk: security bump to version 2.26.2
This is a minor release which includes fixes for CVE-2019-8812 and
CVE-2019-8814.
This release also fixes the build with WebDriver disabled and without
X11, so "0001-GTK-ANGLE-s-eglplatform.h-is-build-broken-with-DENAB.patch"
and "0002-WPE-GTK-Build-fails-with-ENABLE_WEBDRIVER-OFF.patch" are not
needed anymore (and therefore removed). There is also a performance
improvement for a regression related to fallback font selection, and a
couple of small fixes. The full release notes are available at:
https://webkitgtk.org/2019/11/06/webkitgtk2.26.2-released.html
The detailed security advisory can be found at:
https://webkitgtk.org/security/WSA-2019-0006.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yegor Yefremov [Wed, 20 Nov 2019 10:36:55 +0000 (11:36 +0100)]
package/linux-serial-test: bump version
This update fixes both the below mentioned build error when handling
undefined baud rates, and makes the patch for MIPS obsolete.
No other changes will be introduced with this update.
Fixes:
http://autobuild.buildroot.net/results/
ef77cbe220619050eb9d46c78ae79a94eea8aa8b
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fabrice Fontaine [Fri, 22 Nov 2019 18:09:57 +0000 (19:09 +0100)]
package/waylandpp: fix build with cmake < 3.13
Fixes:
- http://autobuild.buildroot.org/results/
587fb44ea2272bd134262716870f5ad36a18661d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bernd Kuhls [Fri, 15 Nov 2019 18:08:31 +0000 (19:08 +0100)]
package/postgresql: bump version to 12.1
Release notes of the bugfix release:
https://www.postgresql.org/about/news/1994/
https://www.postgresql.org/docs/current/release-12-1.html
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit
7a709f77c8099af97ed532ff4bd8c0cfdc26df09)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Arnout Vandecappelle (Essensium/Mind) [Sun, 17 Nov 2019 18:41:14 +0000 (19:41 +0100)]
package/kvm-unit-tests: really fix build on Arch Linux x86_64
On x86_64, we use the host compiler instead of the target compiler to
build kvm-unit-tests, because it is built with -m32 and our target
compiler doesn't support that.
However, the compiler on Arch Linux is broken: it *always* builds with
-fstack-protector, even when -ffreestanding is passed. However, when
-fnostdlib is passed at link time (which is normally the case when
building with -ffreestanding), it is not linked with the stack-protector
library. This leads to a link time error:
/usr/bin/ld: x86/realmode.o: in function `print_serial_u32':
.../x86/realmode.c:104: undefined reference to `__stack_chk_fail'
Since the entire package is built with -ffreestanding, it doesn't
support stack-protector at all. Therefore, simply pass
-fno-stack-protector explicitly on x86_64 to work around the bug in Arch
Linux.
Commit
c0ffd16e4 tried to do this, but got the condition wrong:
-fno-stack-protector was passed in all cases *except* for x86_64. This
commit fixes that, by inverting the condition and moving the
--cross-prefix part to the else branch.
Fixes:
http://autobuild.buildroot.net/results/
ca9576721214ecdce5622f2b7ec4fd4fc3699ac0/
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bernd Kuhls [Fri, 22 Nov 2019 05:29:08 +0000 (06:29 +0100)]
{linux, linux-headers}: bump 4.{4, 9, 14, 19}.x / 5.3.x series
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bernd Kuhls [Fri, 22 Nov 2019 05:25:36 +0000 (06:25 +0100)]
package/{mesa3d, mesa3d-headers}: bump version to 19.2.6
Release notes of this bugfix release:
https://lists.freedesktop.org/archives/mesa-announce/2019-November/000559.html
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jörg Krause [Thu, 21 Nov 2019 07:52:10 +0000 (08:52 +0100)]
package/libupnp18: bump to version 1.8.6
This version fixes a runtime issue which crashes gerbera:
https://github.com/gerbera/gerbera/issues/522
The issue has been reported upstream:
https://github.com/mrjimenez/pupnp/pull/122
The fix for this issue is the only "useful" commit between 1.8.5 and
1.8.6:
$ git --no-pager log --format=oneline release-1.8.5..release-1.8.6
71a47673795e9228775959ea23a984ff6c4d0a43 (tag: release-1.8.6) Adjust the library numbers for release
436aae7b617a4cd7bc1e1411d6882780699eb2ee Put the 1.8.6 release on README.md
90069231d83d2f365b76e2b15d918dfb06209970 Update README.md
7d6158d2c88245f2da4354a8bd0bc359eb15fac6 Update Changelog and THANKS
463f1cc025b27af35b0b73a05ba379d0051bcedf Fix format string for ExtraHeaders
8516da470bf32fa1f5c6f59aac3508378d5a85be Homekeeping for the next release
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Matt Weber [Wed, 20 Nov 2019 15:00:15 +0000 (09:00 -0600)]
package/rpcbind: add systemd as a build-time dependency
When systemd support is enabled, systemd should be built before,
otherwise the build fails with:
checking for SYSTEMD... no
configure: error: libsystemd support requested but found
package/pkg-generic.mk:228: recipe for target
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Petr Vorel [Wed, 20 Nov 2019 17:14:01 +0000 (18:14 +0100)]
package/ltp-testsuite: Rename older patches
* add upstream commit hash
* renumber patches
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Petr Vorel [Wed, 20 Nov 2019 17:14:00 +0000 (18:14 +0100)]
package/ltp-testsuite: backport 3 more musl related patches
0009-nfsv4-acl-Remove-unneeded-malloc-sizeof-FILE.patch is fixing
following reports (other 2 has not been reported due previous)
Fixes:
http://autobuild.buildroot.net/results/
a38a5d8deaa365f73db427911df68dd10c6930a6
http://autobuild.buildroot.net/results/
dfa173caea08876ab69dd959da146b75750cdd28
http://autobuild.buildroot.net/results/
1e602f1574e9134a44d5d66838e7851b38e8069a
http://autobuild.buildroot.net/results/
f1b4b129ec94795b2144b4501b4301fb20892e71
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Wed, 20 Nov 2019 19:36:16 +0000 (20:36 +0100)]
package/clamav: security bump version to 0.102.1
Release notes:
https://lists.clamav.net/pipermail/clamav-announce/2019/000043.html
Fixes CVE-2019-15961.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Wed, 20 Nov 2019 19:47:07 +0000 (20:47 +0100)]
package/{mesa3d, mesa3d-headers}: bump version to 19.2.5
Release notes of this bugfix release:
https://lists.freedesktop.org/archives/mesa-announce/2019-November/000557.html
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Sun, 17 Nov 2019 16:44:49 +0000 (17:44 +0100)]
package/spice: disable tests
By disabling tests, we'll remove the optional gdk-pixbuf dependency
Fixes:
- http://autobuild.buildroot.org/results/
96c786f85d35f33508e9c71778043d16b87f72cd
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Mon, 11 Nov 2019 22:06:58 +0000 (23:06 +0100)]
package/lxc: fix build without SSP
Fixes:
- http://autobuild.buildroot.org/results/
57945f54ffbc5c8764b6891a4516c4907e56ab97
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Avi Shukron [Sat, 16 Nov 2019 13:49:38 +0000 (15:49 +0200)]
package/qemu: add host-python3 as an explicit dependency
qemu requires python in its configre script. Yet host-python was
not listed as one of the package's dependencies. If no other package
requested host-python, then configuring this package will fail since
it won't find any executable named python in the host dir.
In order to reproduce this issue you must not have python2 installed
on your host machine.
Signed-off-by: Avi Shukron <avraham.shukron@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bartosz Bilas [Thu, 14 Nov 2019 10:59:47 +0000 (11:59 +0100)]
package/rauc: add systemd service file hook
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Sat, 16 Nov 2019 17:07:09 +0000 (18:07 +0100)]
package/kmod: fix build with python 3.8
Add a patch to filter -Wl,--no-undefined as -Wl,-z,undefs was only
added in binutils 2.30, and therefore is not available in some older
toolchains, causing build failures such as:
/home/naourr/work/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/aarch64_be-linux-gnu/7.3.1/../../../../aarch64_be-linux-gnu/bin/ld: warning: -z undefs ignored.
Fixes:
- http://autobuild.buildroot.org/results/
06a6d865b6b7d8ebd793bde214f4a4c40e0962e1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: improve commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Mon, 18 Nov 2019 20:24:52 +0000 (21:24 +0100)]
package/domoticz: fix build with jsoncpp
domoticz embeds its own version of jsoncpp that can clash with upstream
jsoncpp so retrieve upstream commit that fix this issue
Build failures started after jsoncpp bumps from 1.8.4 to 1.9.1
Fixes:
- http://autobuild.buildroot.org/results/
a73406eb780a454369ea997654b6b4c6b3757a41
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Sun, 17 Nov 2019 13:26:36 +0000 (14:26 +0100)]
package/lsof: fix static build
TARGET_LDFLAGS which contains -static is not passed so build fails on:
/home/buildroot/autobuild/instance-1/output-1/host/bin/xtensa-buildroot-linux-uclibc-gcc -o lsof dfile.o dmnt.o dnode.o dproc.o dsock.o dstore.o arg.o main.o misc.o node.o print.o proc.o store.o usage.o util.o -L./lib -llsof -ltirpc
/home/buildroot/autobuild/instance-1/output-1/host/lib/gcc/xtensa-buildroot-linux-uclibc/8.3.0/../../../../xtensa-buildroot-linux-uclibc/bin/ld: /home/buildroot/autobuild/instance-1/output-1/host/lib/gcc/xtensa-buildroot-linux-uclibc/8.3.0/libgcc.a(unwind-dw2-fde-dip.o): in function `_Unwind_Find_registered_FDE':
/home/buildroot/autobuild/instance-1/output-1/build/host-gcc-final-8.3.0/build/xtensa-buildroot-linux-uclibc/libgcc/../../../libgcc/unwind-dw2-fde.c:1040: undefined reference to `dl_iterate_phdr'
collect2: error: ld returned 1 exit status
Pass TARGET_LDFLAGS thanks to LSOF_CFGL
Fixes:
- http://autobuild.buildroot.org/results/
0c228e0d3ea1ff2d728ddc906e242d40ed973222
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Sun, 17 Nov 2019 18:07:53 +0000 (19:07 +0100)]
package/gerbera: bump to version 1.3.4
Fix build with libupnp18 1.8.5 through
https://github.com/gerbera/gerbera/commit/
1476d7a90673a870091044fcc0307f5bcaeb24be
Fixes:
- http://autobuild.buildroot.org/results/
e77839fad16caa5798cacb36a5a48b3dbb822ea6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Titouan Christophe [Mon, 18 Nov 2019 15:22:16 +0000 (16:22 +0100)]
package/redis: bump to 5.0.6
The release notes at
https://raw.githubusercontent.com/antirez/redis/5.0/00-RELEASENOTES
say:
==
Upgrade urgency CRITICAL: Only in case of exposed instances to untrusted users.
This Redis release, 5.0.6, is a bugfix and enhancement release. The most
important bugfix is a corruption related to the HyperLogLog. A malformed
HyperLogLog string could cause an invalid access to the memory. At a first
glance the vulnerability appears to be not exploitable but just a DoS. The
way to trigger the issue is complex, we'll not provide any information about
how to do that for the users safety.
==
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Michael Drake [Mon, 18 Nov 2019 16:42:17 +0000 (16:42 +0000)]
docs/manual/quickstart: update output directory contents documentation
Update the documentation for the output/host/ directory to mention
that it contains the sysroot for the target toolchain, as well as the
host tools required for running buildroot.
Update the staging/ documentation to reflect that it is a link to the
target toolchain sysroot in the host/ directory.
Signed-off-by: Michael Drake <michael.drake@codethink.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Korsgaard [Sat, 16 Nov 2019 22:02:26 +0000 (23:02 +0100)]
Update for 2019.11-rc2
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Petr Vorel [Sat, 16 Nov 2019 00:36:38 +0000 (01:36 +0100)]
package/ltp-testsuite: proper fix for missing __kernel_fsid_t
Backported 4 fixes from upstream (2 of them require calling autoreconf).
Fixes: http://autobuild.buildroot.net/results/7a29e3b767e3d23dd64c130daa735ca6c062baf8
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
[yann.morin.1998@free.fr: add upstream patchwork URL for patch 7]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Carlos Santos [Sat, 9 Nov 2019 15:22:54 +0000 (12:22 -0300)]
board/beaglebone: fix boot on BeagleBone Black
Commit
68b5b79b2f has set the getty port to the default console but left
"ttyO0" in bootargs, in the U-Boot environment. Use "ttyS0", instead.
Also set loadaddr to 0x82000000 and fdtaddr to 0x88000000, replacing the
values that were valid for the ancient U-Boot and Linux pre-installed on
old boards but cause boot hangs with the current versions.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Thomas Petazzoni [Sun, 10 Nov 2019 13:29:11 +0000 (14:29 +0100)]
DEVELOPERS: add Carlo Caione for jailhouse
The jailhouse package was added in commit
ee4990721c14c624c99295598fde29e395647fb9 by Carlo Caione, but no entry
in the DEVELOPERS file was added. Let's fix this to ensure we have a
registered maintainer for the Jailhouse package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Carlo Caione <ccaione@baylibre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adrian Perez de Castro [Sun, 10 Nov 2019 16:25:03 +0000 (18:25 +0200)]
package/wpewebkit: security bump to version 2.26.2
This is a minor release which includes fixes for CVE-2019-8812 and
CVE-2019-8814.
This release also fixes the build with WebDriver disabled, making patch
"0002-WPE-GTK-Build-fails-with-ENABLE_WEBDRIVER-OFF.patch" unneeded
(and therefore removed). There is also a performance improvement for
a regression related to fallback font selection, and a couple of small
fixes. The full release notes are available at:
https://wpewebkit.org/release/wpewebkit-2.26.2.html
The detailed security advisory can be found at:
https://wpewebkit.org/security/WSA-2019-0006.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bernd Kuhls [Mon, 11 Nov 2019 03:31:06 +0000 (04:31 +0100)]
package/dhcp: fix autoreconf for libtool-enabled build
Upstream provides two configure.ac versions, the default one does not
use libtool. For libtool-enabled builds the default configure.ac calls
https://gitlab.isc.org/isc-projects/dhcp/blob/master/configure.ac#L873
https://gitlab.isc.org/isc-projects/dhcp/blob/master/config+lt
which copies configure.ac+lt to configure.ac and starts autoreconf.
On host systems lacking autoreconf this causes a build error:
configure: WARNING: legacy configure is used but libtool is enabled. Trying to recover...
/home/buildroot/autobuild/instance-2/output-1/build/dhcp-4.4.1/config+lt: 20:
/home/buildroot/autobuild/instance-2/output-1/build/dhcp-4.4.1/config+lt: autoreconf: not found
autoreconf failed
Fixes:
http://autobuild.buildroot.net/results/16f/
16f800dd844572336c2fbba3d123604405382a84/
http://autobuild.buildroot.net/results/eac/
eac1e7b25128476eccf40aece612e13a1e0637dc/
http://autobuild.buildroot.net/results/8fc/
8fcfe7b40af3ae42549351c70466b4dd388820e3/
http://autobuild.buildroot.net/results/7ff/
7ff82708b9dea09f1447f0ef94b9bb21fca73196/
http://autobuild.buildroot.net/results/1c5/
1c5f401ce7eef13f5ca4603ca8d7c67da249d7c9/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Fri, 15 Nov 2019 21:56:36 +0000 (22:56 +0100)]
package/ltp-testsuite: fix static build with lts-musl
Fixes:
- http://autobuild.buildroot.org/results/
a43def025d44344a4a690b52a52b3959e20b5d26
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Thomas Preston [Wed, 13 Nov 2019 10:34:17 +0000 (10:34 +0000)]
package/x11r7/xserver_xorg-server: fix arm glibc-2.30 compile
Fixes:
In file included from lnx_init.c:33:
../../../../hw/xfree86/common/compiler.h:767:10: fatal error: sys/io.h: No such file or directory
#include <sys/io.h>
^~~~~~~~~~
compilation terminated.
The ARM sys/io.h has been removed from upstream glibc, which is in
buildroot. This causes the xorg-server build to fail on ARM when using
the glibc toolchain. See [1], [2].
The following patches ([3], [4]) from upstream xserver fix this, but
have not yet been released.
[1] https://sourceware.org/glibc/wiki/Release/2.30#A.3Csys.2BAC8-io.h.3E_removed_on_32-bit_Arm
[2] https://gitlab.freedesktop.org/xorg/xserver/issues/840
[3] https://gitlab.freedesktop.org/xorg/xserver/commit/
6a2ce6c5da9456b97683db6224f38ef3b02cce4b
[4] https://gitlab.freedesktop.org/xorg/xserver/commit/
fe4cd0e7f5c58fa94db36326aadc1bd4e6d73eba
Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Yann E. MORIN [Wed, 13 Nov 2019 20:44:12 +0000 (21:44 +0100)]
package/kodi: share the download dir with helper programs
The two helper programs TesturePackager and JsonSchemaBuilder are built
out of the same source tree as Kodi, so to avoid downloading the same
archive three times, let's them share the same download directory.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Yann E. MORIN [Thu, 14 Nov 2019 19:22:10 +0000 (20:22 +0100)]
package/kodi: add missing host-gettext dependency
A sub-component of Kodi (cpluff) needs to be autoreconf-ed, and uses
gettext, so calls to autopoint:
[ 2%] Performing autoreconf step for 'libcpluff'
autoreconf: Entering directory `.'
autoreconf: running: autopoint --force
Can't exec "autopoint": No such file or directory at [...]/host/share/autoconf/Auto4te/FileUtils.pm line 345.
autoreconf: failed to run autopoint: No such file or directory
autoreconf: autopoint is needed because this package uses Gettext
make[4]: *** [CMakeFiles/libcpluff.dir/build.make:121: build/cpluff/src/libcpluff-stamp/libcpluff-autoreconf] Error 1
make[3]: *** [CMakeFiles/Makefile2:615: CMakeFiles/libcpluff.dir/all] Error 2
Add a dependency to host-gettext to bring an appropriate variant that
provides autotpoint (gettext-tiny's autopoint works like a charm, for
the curious).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Yann E. MORIN [Thu, 14 Nov 2019 19:22:09 +0000 (20:22 +0100)]
package/gettext-tiny: fix gettext wrapper
When a textdomain is specified, we ignore it twice: we shift args, and
we printf ${2}, which would yield an empty printf.
Fix that by not shifting, and just printf ${2}; this is nicer.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Yann E. MORIN [Thu, 14 Nov 2019 19:22:08 +0000 (20:22 +0100)]
package/gettext-tiny: fix prefix in autopoint
gettext-tiny also installs a fake autopoint, but it still needs to be
pointed at the m4 macros, which the template autopoint expects to be in
@datadir@, where datadir is the traditional autotools datadir, derived
from datarootdir, itself derived from prefix.
So, pass prefix so all the locations are properly pointing to HOST_DIR,
instead of the default /usr/local.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fabrice Fontaine [Fri, 15 Nov 2019 19:47:28 +0000 (20:47 +0100)]
package/libsigrokdecode: fix build with python 3.8
This will fix build with sigrok-cli and python 3.8
Fixes:
- http://autobuild.buildroot.org/results/
4855d42545cbfeeec7529410acc84b61bc8790af
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Peter Korsgaard [Thu, 14 Nov 2019 21:20:12 +0000 (22:20 +0100)]
package/neardal: unconditionally use libedit
neardal is licensed under LGPL-2.0, which is (most likely) not license
compatible with readline (GPL-3.0+), so always use the libedit backend.
The choice is done by ./configure, which first checks for libedit, and
uses readline only as a fallback. Since we do build libedit before
neardal, that's what is going to be picked up.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr:
- add blurb about preference in ./configure
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Peter Korsgaard [Thu, 14 Nov 2019 21:20:11 +0000 (22:20 +0100)]
package/neardal: license is LGPL-2.0, not GPL-2.0
COPYING states LGPL-2.0, not GPL-2.0:
GNU LIBRARY GENERAL PUBLIC LICENSE
Version 2, June 1991
So use that for the license tag.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bernd Kuhls [Thu, 14 Nov 2019 17:58:35 +0000 (18:58 +0100)]
{linux, linux-headers}: bump 4.{4, 9, 14, 19}.x / 5.3.x series
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bernd Kuhls [Thu, 14 Nov 2019 17:54:24 +0000 (18:54 +0100)]
package/{mesa3d, mesa3d-headers}: bump version to 19.2.4
Quoting
https://lists.freedesktop.org/archives/mesa-announce/2019-November/000555.html
"This is an emergency release, to fix a critical bug found in the
19.2.3 release which causes incomplete rendering on all mesa drivers."
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter Korsgaard [Wed, 13 Nov 2019 15:17:18 +0000 (16:17 +0100)]
package/kodi: drop readline dependency
{python-,}readline is (no longer) a required dependency of kodi, and
readline (GPL-3.0+) is not license compatible with kodi (GPL-2.0), so drop
the dependency.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
projects / buildroot.git / log