lto: fix documentation about -fpie and -fpic options

gcc/ChangeLog:

* doc/invoke.texi: Document how are pie and pic options merged.

AArch64: Add FLAG for add/sub arithmetic intrinsics [PR94442]

2020-08-26  Zhiheng Xie  <xiezhiheng@huawei.com>

gcc/ChangeLog:

* config/aarch64/aarch64-simd-builtins.def: Add proper FLAG
for add/sub arithmetic intrinsics.

aarch64: Fix testcase gcc.target/aarch64/insv_1.c

There are three failures in gcc.target/aarch64/insv_1.c.
 FAIL: gcc.target/aarch64/insv_1.c scan-assembler bfi\tx[0-9]+, x[0-9]+, 0, 8
 FAIL: gcc.target/aarch64/insv_1.c scan-assembler bfi\tx[0-9]+, x[0-9]+, 16, 5
 FAIL: gcc.target/aarch64/insv_1.c scan-assembler movk\tx[0-9]+, 0x1d6b, lsl 32

This patch fix the third failure which was missed "#" before immediate value
in scan-assembler.

gcc/testsuite/ChangeLog:

* gcc.target/aarch64/insv_1.c: Add '#' in scan-assembler

dwarf2out: Fix up dwarf2out_next_real_insn caching [PR96729]

The addition of NOTE_INSN_BEGIN_STMT and NOTE_INSN_INLINE_ENTRY notes
reintroduced quadratic behavior into dwarf2out_var_location.
This function needs to know the next real instruction to which the var
location note applies, but the way final_scan_insn is called outside of
final.c main loop doesn't make it easy to look up the next real insn in
there (and for non-dwarf it is even useless).  Usually next real insn is
only a few notes away, but we can have hundreds of thousands of consecutive
notes only followed by a real insn.  dwarf2out_var_location to avoid the
quadratic behavior contains a cache, it remembers the next note and when it
is called again on that loc_note, it can use the previously computed
dwarf2out_next_real_insn result, rather than walking the insn chain once
again.  But, for NOTE_INSN_{BEGIN_STMT,INLINE_ENTRY} dwarf2out_var_location
is not called while the code puts into the cache those notes, which means if
we have e.g. in the worst case NOTE_INSN_VAR_LOCATION and
NOTE_INSN_BEGIN_STMT notes alternating, the cache is not really used.

The following patch fixes it by looking up the next NOTE_INSN_VAR_LOCATION
if any.  While the lookup could be perhaps done together with looking for
the next real insn once (e.g. in dwarf2out_next_real_insn or its copy),
there are other dwarf2out_next_real_insn callers which don't need/want that
behavior and if there are more than two NOTE_INSN_VAR_LOCATION notes
followed by the same real insn, we need to do that "find next
NOTE_INSN_VAR_LOCATION" walk anyway.

On the testcase from the PR this patch speeds it 2.8times, from 0m0.674s
to 0m0.236s (why it takes for the reporter more than 60s is unknown).

2020-08-26  Jakub Jelinek  <jakub@redhat.com>

PR debug/96729
* dwarf2out.c (dwarf2out_next_real_insn): Adjust function comment.
(dwarf2out_var_location): Look for next_note only if next_real is
non-NULL, in that case look for the first non-deleted
NOTE_INSN_VAR_LOCATION between loc_note and next_real, if any.

libiberty: Add support for `in' and `in ref' storage classes.

The storage class `in' is now a first-class citizen with its own mangle
symbol, of which also permits `in ref'.  Previously, `in' was an alias
to `const [scope]', which is a type constructor.

The mangle symbol repurposed for this is `I', which was originally used
by identifier types.  However, while TypeIdentifier is part of the
grammar, it must be resolved to some other entity during the semantic
passes, and so shouldn't appear anywhere in the mangled name.

Old tests that are now no longer valid have been removed.

libiberty/ChangeLog:

* d-demangle.c (dlang_function_args): Handle 'in' and 'in ref'
parameter storage classes.
(dlang_type): Remove identifier type.
* testsuite/d-demangle-expected: Update tests.

d: Merge upstream dmd e49192807

1. Removes prelude assert for constructors and destructors.  To trigger
these asserts one needed to construct or destruct an aggregate at the
null memory location.  This would crash upon any data member access,
which is required for a constructor or destructor to do anything useful.

2. Disables bounds checking in foreach statements, when the array is
either a static or dynamic array.  If we trust the array `.length' to
be correct, then all elements are between `[0 .. length]', and can't
can't be out of bounds.

Reviewed-on: https://github.com/dlang/dmd/pull/11623

gcc/d/ChangeLog:

* dmd/MERGE: Merge upstream dmd e49192807

d: Fix no RVO when returning struct literals initialized with constructor.

Backports a change from upstream dmd that moves front-end NRVO checking
from ReturnStatement semantic to the end of FuncDeclaration semantic.

In the codegen, retStyle has been partially implemented so that only
structs and static arrays return RETstack.  This isn't accurate, but
don't need to be for the purposes of semantic analysis.

If a function either has TREE_ADDRESSABLE or must return in memory, then
DECL_RESULT is set as the shidden field for the function.  This is used
in the codegen pass for ReturnStatement where it is now detected whether
a function is returning a struct literal or a constructor function, then
the DECL_RESULT is used to directly construct the return value, instead
of doing so via temporaries.

Reviewed-on: https://github.com/dlang/dmd/pull/11622

gcc/d/ChangeLog:

PR d/96156
* d-frontend.cc (retStyle): Only return RETstack for struct and static
array types.
* decl.cc (DeclVisitor::visit (FuncDeclaration *)): Use NRVO return
for all TREE_ADDRESSABLE types.  Set shidden to the RESULT_DECL.
* expr.cc (ExprVisitor::visit (CallExp *)): Force TARGET_EXPR if the
'this' pointer reference is a CONSTRUCTOR.
(ExprVisitor::visit (StructLiteralExp *)): Generate assignment to the
symbol to initialize with literal.
* toir.cc (IRVisitor::visit (ReturnStatement *)): Detect returning
struct literals and write directly into the RESULT_DECL.
* dmd/MERGE: Merge upstream dmd fe5f388d8.

gcc/testsuite/ChangeLog:

PR d/96156
* gdc.dg/pr96156.d: New test.

tilepro: Update generator file to define IN_TARGET_CODE in target file.

The target files tilegx/mul-tables.c and tilepri/mul-tables.c were
updated in SVN r255743, but the generator file that produces them
wasn't, so it was reverting this change during builds.

gcc/ChangeLog:

* config/tilepro/gen-mul-tables.cc (main): Define IN_TARGET_CODE to 1
in the target file.

contrib: Add OPT-enable-obsolete to tile*-*-*

The tile*-*-* targets were marked as obsolete in SVN r259724.

contrib/ChangeLog:

* config-list.mk (LIST): Add OPT-enable-obsolete to tilegx-linux-gnu,
tilegxbe-linux-gnu, and tilepro-linux-gnu.

d: Merge upstream dmd cb4a96fae

Fixes both a bug where compilation would hang, and an issue where recursive
template limits are hit too early.

Reviewed-on: https://github.com/dlang/dmd/pull/11621

gcc/d/ChangeLog:

* dmd/MERGE: Merge upstream dmd cb4a96fae

d: Use read() to load contents of stdin into memory.

This would be an improvement over reading one character at a time.

An ICE was discovered when mixing reading from stdin with `-v', this has been
fixed in upstream DMD and backported as well.

Reviewed-on: https://github.com/dlang/dmd/pull/11620

gcc/d/ChangeLog:

* d-lang.cc (d_parse_file): Use read() to load contents from stdin,
allow the front-end to free the memory after parsing.
* dmd/MERGE: Merge upstream dmd 2cc25c219.

d: Fix small struct literals that have non-deterministic hash values

Same issue as the initial commit that addressed PR96153, only this time to fix
it also for structs that are not returned in memory.  Tests have been added
that triggered an assertion on x86_64, however the original test was failing
on SPARC 64-bit targets.

gcc/d/ChangeLog:

PR d/96153
* d-codegen.cc (build_address): Create a temporary for CALL_EXPRs
returning trivial aggregates, pre-filling it with zeroes.
(build_memset_call): Use build_zero_cst if setting the entire object.

gcc/testsuite/ChangeLog:

PR d/96153
* gdc.dg/pr96153.d: Add new tests.

d: Fix no NRVO when returning an array of a non-POD struct

TREE_ADDRESSABLE was not propagated from the RECORD_TYPE to the ARRAY_TYPE, so
NRVO code generation was not being triggered.

gcc/d/ChangeLog:

PR d/96157
* d-codegen.cc (d_build_call): Handle TREE_ADDRESSABLE static arrays.
* types.cc (make_array_type): Propagate TREE_ADDRESSABLE from base
type to static array.

gcc/testsuite/ChangeLog:

PR d/96157
* gdc.dg/pr96157a.d: New test.
* gdc.dg/pr96157b.d: New test.

d: Don't run all permutations for fail_compilation tests.

Fail compilation tests only check for language errors from the front-end, all
default option switches do nothing to alter the error.

gcc/testsuite/ChangeLog:

* lib/gdc-utils.exp (gdc-convert-test): Clear PERMUTE_ARGS for
fail_compilation tests if not set by test file.

d: Move lowering of each tree node to separate functions

gcc/d/ChangeLog:

* d-gimplify.cc (d_gimplify_expr): Move lowering of each tree node to
separate functions.
(d_gimplify_modify_expr): New function.
(d_gimplify_addr_expr): New function.
(d_gimplify_call_expr): New function.
(d_gimplify_unsigned_rshift_expr): New function.

d: Move d_gimplify_expr and dependencies to d-gimplify.cc

gcc/d/ChangeLog:

* Make-lang.in (D_OBJS): Add d-gimplify.o.
* d-lang.cc (empty_modify_p): Move to d-gimplify.cc.
(d_gimplify_expr): Likewise.
* d-tree.h (d_gimplify_expr): Declare.
* d-gimplify.cc: New file.

IPA symver: allow multiple symvers for a definition

gcc/ChangeLog:

* cgraphunit.c (process_symver_attribute): Allow multiple
symver attributes for one symbol.
* doc/extend.texi: Document the change.

gcc/testsuite/ChangeLog:

* lib/target-supports-dg.exp: Add dg-require-symver.
* lib/target-supports.exp: Likewise.
* gcc.dg/ipa/symver1.c: New test.

Fortran: Add 'device_type' clause to OpenMP's declare target

gcc/fortran/ChangeLog:

* gfortran.h (enum gfc_omp_device_type): New.
(symbol_attribute, gfc_omp_clauses, gfc_common_head): Use it.
* module.c (enum ab_attribute): Add AB_OMP_DEVICE_TYPE_HOST,
AB_OMP_DEVICE_TYPE_NOHOST and AB_OMP_DEVICE_TYPE_ANY.
(attr_bits, mio_symbol_attribute): Handle it.
(load_commons, write_common_0): Handle omp_device_type flag.
* openmp.c (enum omp_mask1): Add OMP_CLAUSE_DEVICE_TYPE
(OMP_DECLARE_TARGET_CLAUSES): Likewise.
(gfc_match_omp_clauses): Match 'device_type'.
(gfc_match_omp_declare_target): Handle it.
* trans-common.c (build_common_decl): Write device-type clause.
* trans-decl.c (add_attributes_to_decl): Likewise.

gcc/testsuite/ChangeLog:

* gfortran.dg/gomp/declare-target-4.f90: New test.
* gfortran.dg/gomp/declare-target-5.f90: New test.

libstdc++: Rename _Hashtable _H1, _H2 and _Hash template parameters

Limit our _Hashtable implementation to ranged hash. _H1 is now rename
to _Hash matching the _Hash functor used for unordered containers. _H2
is now renamed to _RangeHash. Former _Hash simply becomes _Unused. Remove
_ExtractKey storage.

libstdc++-v3/ChangeLog:

* include/bits/hashtable_policy.h (_Hashtable<>): Rename _H1 into _Hash
_H2 into _RangeHash and _Hash into _Unused.
(_Hastable_base<>): Likewise.
(_Map_base<>): Likewise.
(_Insert_base<>): Likewise.
(_Insert<>): Likewise.
(_Rehash_base<>): Likewise.
(_Local_iterator_base<>): Likewise.
(_Hash_code_base<>): Likewise.
(_Hash_code_base<_Key, _Value, _ExtractKey, _H1, _H2, _Hash, false>):
Remove.
(_Hash_code_base<_Key, _Value, _ExtractKey, _H1, _H2, _Hash, true>):
Remove.
(_Hash_code_base<_Key, _Value, _ExtractKey, _Hash, _RangeHas, _Unused,
bool>): Remove _Hashtable_ebo_helper<2, _RangeHash> base type..
(_Hash_code_base<>::_M_bucket_index(const _Key&, __hash_code, size_t)):
Replace by...
(_Hash_code_base<>::_M_bucket_index(__hash_code, size_t)): ...this.
(_Local_iterator<>): Remove _H1 and _H2 template parameters.
(_Local_const_iterator<>): Likewise.
(_Equality<>): Likewise.
(_Map_base<>::operator[](const key_type&): Adapt.
(_Map_base<>::operator[](key_type&&): Adapt.
(_Identity::operator()): Add noexcept.
(_Select1st::operator()): Likewise.
(_Hash_code_base<>): Remove _Hashtable_ebo_helper<0, _ExtractKey> base
type.
(_Hash_code_base::_M_extract): Remove.
* include/bits/hashtable.h (_Hashtable<>): Remove _H1 and _H2 template
parameters. Remove _ExtractKey from constructors.
(_Hashtable<>::_M_insert_unique_node(const key_type&, size_t,
__hash_code, __node_type*, size_t)): Replace by...
(_Hashtable<>::_M_insert_unique_node(size_t, __hash_code,
 __node_type*, size_t)): ...this.
(_Hashtable<>::_M_insert_muti_node(__node_type*, const key_type&,
__hash_code, __node_type*)): Replace by...
(_Hashtable<>::_M_insert_multi_node(__node_type*, __hash_code,
__node_type*)): ...this.
(_Hashtable<>::__key_extract): Remove.
* include/bits/node_handle.h: Adapt.

Adjust testcase.

Rewriting testcase with cpp source file, then compare operator could
be used directly for vector, this would avoid impact of vectorizer.

gcc/testsuite/ChangeLog:
PR target/96667
* gcc.target/i386/avx512bw-pr96246-1.c: Moved to...
* g++.target/i386/avx512bw-pr96246-1.C: ...here.
* gcc.target/i386/avx512bw-pr96246-2.c: Moved to...
* g++.target/i386/avx512bw-pr96246-2.C: ...here.
* gcc.target/i386/avx512vl-pr96246-1.c: Moved to...
* g++.target/i386/avx512vl-pr96246-1.C: ...here.
* gcc.target/i386/avx512vl-pr96246-2.c: Moved to...
* g++.target/i386/avx512vl-pr96246-2.C: ...here.

analyzer: fix leak false positive/widening on pointer iteration [PR94858]

PR analyzer/94858 reports a false diagnostic from
-Wanalyzer-malloc-leak, where the allocated pointer is pointed to by a
field of a struct, and a loop writes to a buffer, writing through an
iterating pointer value.

There were several underlying problems, relating to clobbering of the
struct holding the malloc-ed pointer; in each case the analyzer was
conservatively assuming that a write could affect this region,
clobbering it to "unknown", and this was detected as a leak.

The initial write within the loop dereferences the initial value of
a field, and the analyzer was assuming that that pointer could
point to the result of the malloc call.  The patch extends
store::eval_alias_1 so that it "knows" that the initial value of a
pointer at the beginning of a path can't point to a region that was
allocated on the heap after the beginning of the path.

On fixing that, the next issue is that within the loop the iterated
pointer value becomes "unknown", and hence *ptr becomes a write to a
symbolic region, and thus might clobber the struct (which it can't).
This patch adds enough logic to svalue::can_merge_p to merge the
iterating pointer value so that at the 2nd iteration analyzing
the loop it becomes a widening_svalue from the initial svalue, so
that this becomes a fixed point of the analysis, and is not an
unknown_svalue.  The patch further extends store::eval_alias_1 so that
it "knows" that this widening_svalue can only point to the same base
region as the initial value did; in particular, symbolic writes through
this pointer can only clobber that base region, not the struct holding
the malloc-ed pointer.

gcc/analyzer/ChangeLog:
PR analyzer/94858
* region-model-manager.cc
(region_model_manager::get_or_create_widening_svalue): Assert that
neither of the inputs are themselves widenings.
* store.cc (store::eval_alias_1): The initial value of a pointer
can't point to a region that was allocated on the heap after the
beginning of the path.  A widened pointer value can't alias anything
that the initial pointer value can't alias.
* svalue.cc (svalue::can_merge_p): Merge BINOP (X, OP, CST) with X
to a widening svalue.  Merge
BINOP(WIDENING(BASE, BINOP(BASE, X)), X) and BINOP(BASE, X) to
to the LHS of the first BINOP.

gcc/testsuite/ChangeLog:
PR analyzer/94858
* gcc.dg/analyzer/loop-start-up-to-end-by-1.c: Remove xfail.
* gcc.dg/analyzer/pr94858-1.c: New test.
* gcc.dg/analyzer/pr94858-2.c: New test.
* gcc.dg/analyzer/torture/loop-inc-ptr-2.c: Update expected number
of enodes.
* gcc.dg/analyzer/torture/loop-inc-ptr-3.c: Likewise.

analyzer: fix ICE on initializers for unsized array fields [PR96777]

gcc/analyzer/ChangeLog:
PR analyzer/96777
* region-model.h (class compound_svalue): Document that all keys
must be concrete.
(compound_svalue::compound_svalue): Move definition to svalue.cc.
* store.cc (binding_map::apply_ctor_to_region): Handle
initializers for trailing arrays with incomplete size.
* svalue.cc (compound_svalue::compound_svalue): Move definition
here from region-model.h.  Add assertion that all keys are
concrete.

gcc/testsuite/ChangeLog:
PR analyzer/96777
* gcc.dg/analyzer/pr96777.c: New test.

Daily bump.

x86: Change CTZ_DEFINED_VALUE_AT_ZERO to return 0/2

Change CTZ_DEFINED_VALUE_AT_ZERO/CTZ_DEFINED_VALUE_AT_ZERO to return 0/2
to enable table-based clz/ctz optimization:

 -- Macro: CLZ_DEFINED_VALUE_AT_ZERO (MODE, VALUE)
 -- Macro: CTZ_DEFINED_VALUE_AT_ZERO (MODE, VALUE)
     A C expression that indicates whether the architecture defines a
     value for 'clz' or 'ctz' with a zero operand.  A result of '0'
     indicates the value is undefined.  If the value is defined for only
     the RTL expression, the macro should evaluate to '1'; if the value
     applies also to the corresponding optab entry (which is normally
     the case if it expands directly into the corresponding RTL), then
     the macro should evaluate to '2'.  In the cases where the value is
     defined, VALUE should be set to this value.

gcc/

PR target/95863
* config/i386/i386.h (CTZ_DEFINED_VALUE_AT_ZERO): Return 0/2.
(CLZ_DEFINED_VALUE_AT_ZERO): Likewise.

gcc/testsuite/

PR target/95863
* gcc.target/i386/pr95863-1.c: New test.
* gcc.target/i386/pr95863-2.c: Likewise.

hppa: PR middle-end/87256: Improved hppa_rtx_costs avoids synth_mult madness.

This is my proposed fix to PR middle-end/87256 where synth_mult takes an
unreasonable amount of CPU time determining an optimal sequence of
instructions to perform multiplication by (large) integer constants on hppa.
One workaround proposed in bugzilla, is to increase the hash table used
to cache/reuse intermediate results. This helps but is a workaround for
the (hidden) underlying problem.

The real issue is that the hppa_rtx_costs function is providing wildly
inaccurate values (estimates) to the middle-end.  For example, (p*q)+(r*s)
would appear to be cheaper than a single multiplication.  Another
example is that "(ashiftrt:di regA regB)" is claimed to be only be
COST_N_INSNS(1) when in fact the hppa backend actually generates
slightly more than a single instruction.

It turns out that simply tightening up the logic in hppa_rtx_costs to
return more reasonable values, dramatically reduces the number of recursive
invocations in synth_mult for the test case in PR87256, and presumably
also produces faster code (that should be observable in benchmarks).

2020-08-25  Roger Sayle  <roger@nextmovesoftware.com>

gcc/ChangeLog
PR middle-end/87256
* config/pa/pa.c (hppa_rtx_costs_shadd_p): New helper function
to check for coefficients supported by shNadd and shladd,l.
(hppa_rtx_costs):  Rewrite to avoid using estimates based upon
FACTOR and enable recursing deeper into RTL expressions.

hppa: Improve expansion of ashldi3 when !TARGET_64BIT

This patch improves the code generated on PA-RISC for DImode
(double word) left shifts by small constants (1-31).  This target
has a very cool shd instruction that can be recognized by combine
for simple shifts, but relying on combine is fragile for more
complicated functions.  This patch tweaks pa.md's ashldi3 expander,
to form the optimal two instruction shd/zdep sequence at RTL
expansion time.

As an example of the benefits of this approach, the simple function
unsigned long long u9(unsigned long long x) { return x*9; }
currently generates 9 instructions and with this patch now requires
only 7.

2020-08-25  Roger Sayle  <roger@nextmovesoftware.com>

* config/pa/pa.md (ashldi3): Additionally, on !TARGET_64BIT
generate a two instruction shd/zdep sequence when shifting
registers by suitable constants.
(shd_internal): New define_expand to provide gen_shd_internal.

OpenMP: Improve map-clause error message for array function parameter (PR96678)

gcc/c/ChangeLog:

PR c/96678
* c-typeck.c (handle_omp_array_sections_1): Talk about
array function parameter in the error message.

gcc/cp/ChangeLog:

PR c/96678
* semantics.c (handle_omp_array_sections_1): Talk about
array function parameter in the error message.

gcc/testsuite/ChangeLog:

PR c/96678
* c-c++-common/gomp/map-4.c: New test.
* c-c++-common/gomp/depend-1.c: Update dg-error.
* c-c++-common/gomp/map-1.c: Likewise.
* c-c++-common/gomp/reduction-1.c: Likewise.
* g++.dg/gomp/depend-1.C: Likewise.
* g++.dg/gomp/depend-2.C: Likewise.

libstdc++: Remove tests for self-move debug assertions

I recently removed the debug mode checks for self-move assignment, which
means these tests now fail when _GLIBCXX_DEBUG is added to the options
or when the check-debug target is used. Remove all the tests.

libstdc++-v3/ChangeLog:

* testsuite/21_strings/debug/iterator_self_move_assign_neg.cc: Removed.
* testsuite/21_strings/debug/self_move_assign_neg.cc: Removed.
* testsuite/23_containers/deque/debug/iterator_self_move_assign_neg.cc: Removed.
* testsuite/23_containers/deque/debug/self_move_assign_neg.cc: Removed.
* testsuite/23_containers/forward_list/debug/iterator_self_move_assign_neg.cc: Removed.
* testsuite/23_containers/forward_list/debug/self_move_assign_neg.cc: Removed.
* testsuite/23_containers/list/debug/iterator_self_move_assign_neg.cc: Removed.
* testsuite/23_containers/list/debug/self_move_assign_neg.cc: Removed.
* testsuite/23_containers/map/debug/iterator_self_move_assign_neg.cc: Removed.
* testsuite/23_containers/map/debug/self_move_assign_neg.cc: Removed.
* testsuite/23_containers/multimap/debug/iterator_self_move_assign_neg.cc: Removed.
* testsuite/23_containers/multimap/debug/self_move_assign_neg.cc: Removed.
* testsuite/23_containers/multiset/debug/iterator_self_move_assign_neg.cc: Removed.
* testsuite/23_containers/multiset/debug/self_move_assign_neg.cc: Removed.
* testsuite/23_containers/set/debug/iterator_self_move_assign_neg.cc: Removed.
* testsuite/23_containers/set/debug/self_move_assign_neg.cc: Removed.
* testsuite/23_containers/unordered_map/debug/iterator_self_move_assign_neg.cc: Removed.
* testsuite/23_containers/unordered_map/debug/self_move_assign_neg.cc: Removed.
* testsuite/23_containers/unordered_multimap/debug/iterator_self_move_assign_neg.cc:
Removed.
* testsuite/23_containers/unordered_multimap/debug/self_move_assign_neg.cc: Removed.
* testsuite/23_containers/unordered_multiset/debug/iterator_self_move_assign_neg.cc:
Removed.
* testsuite/23_containers/unordered_multiset/debug/self_move_assign_neg.cc: Removed.
* testsuite/23_containers/unordered_set/debug/iterator_self_move_assign_neg.cc: Removed.
* testsuite/23_containers/unordered_set/debug/self_move_assign_neg.cc: Removed.
* testsuite/23_containers/vector/debug/iterator_self_move_assign_neg.cc: Removed.
* testsuite/23_containers/vector/debug/self_move_assign_neg.cc: Removed.

libstdc++: Fix debug-mode build failure in <chrono>

libstdc++-v3/ChangeLog:

* include/std/chrono (year_month_weekday::ok): Fix assert.

libstdc++: Adjust static assertions in futures and promises [LWG 3466]

Add a static_assertions to check the result type is destructible, as in
the proposed resolution for LWG 3466 (which supersedes 3458).

libstdc++-v3/ChangeLog:

* include/std/future (future, shared_future. promise): Add
is_destructible assertion (LWG 3466). Adjust string-literal for
!is_array and !is_function assertions.
* testsuite/30_threads/future/requirements/lwg3458.cc: Check
types with no accessible destructor. Adjust expected errors.
* testsuite/30_threads/promise/requirements/lwg3466.cc:
Likewise.
* testsuite/30_threads/shared_future/requirements/lwg3458.cc:
Likewise.

libstdc++: Add more C++20 additions to <chrono>

This patch adds the C++20 calendar types and their methods as defined in
[time.cal] (modulo the parsing/printing support).  This patch also
implements [time.hms] and [time.12], and a few more bits of
[time.clock].  The remaining C++20 additions to <chrono> from P0355 and
P1466 depend on [time.zone] and <format>, so they will come later, as
will more optimized versions of some of the algorithms added here.

The non-member operator overloads for the calendar types are defined as
namespace-scope functions in the standard, but here we instead define
these operator overloads as hidden friends.  This simplifies the
implementation somewhat and lets us reap the benefits of hidden friends
for these overloads.

The bulk of this work is based on a patch from Ed Smith-Rowland, which can
be found at the Git branch users/redi/heads/calendar.

Co-authored-by: Ed Smith-Rowland <3dw4rd@verizon.net>
Co-authored-by: Jonathan Wakely <jwakely@redhat.com>
libstdc++-v3/ChangeLog:

* include/std/chrono (time_point::operator++)
(time_point::operator--): Define.
(utc_clock, tai_clock, gps_clock): Forward declare.
(utc_time, utc_seconds, tai_time, tai_seconds, gps_time)
(gps_seconds): Define.
(is_clock<utc_clock>, is_clock<tai_clock>, is_clock<gps_clock>)
(is_clock_v<utc_clock>, is_clock_v<tai_clock>)
(is_clock_v<gps_clock>): Define these specializations.
(leap_second_info): Define.
(day, month, year, weekday, weekday_indexed)
(weekday_last, month_day, month_day_last, month_weekday)
(month_weekday_last, year_month, year_month_day)
(year_month_day_last, year_month_weekday, year_month_weekday_last):
Declare and later define.
(last_spec, last, __detail::__days_per_month)
(__detail::__days_per_month, __detail::__last_day): Define.
(January, February, March, April, May, June, July, August)
(September, October, November, December, Sunday, Monday, Tuesday)
(Wednesday, Thursday, Friday, Saturday): Define.
(weekday::operator[]): Define out-of-line.
(year_month_day::_S_from_days, year_month_day::M_days_since_epoch):
Likewise.
(year_month_day::year_month_day, year_month_day::ok): Likewise.
(__detail::__pow10, hh_mm_ss): Define.
(literals::chrono_literals::operator""d)
(literals::chrono_literals::operator""y): Define.
(is_am, is_pm, make12, make24): Define.
* testsuite/20_util/time_point/4.cc: New test.
* testsuite/std/time/day/1.cc: New test.
* testsuite/std/time/hh_mm_ss/1.cc: New test.
* testsuite/std/time/is_am/1.cc: New test.
* testsuite/std/time/is_pm/1.cc: New test.
* testsuite/std/time/make12/1.cc: New test.
* testsuite/std/time/make24/1.cc: New test.
* testsuite/std/time/month/1.cc: New test.
* testsuite/std/time/month_day/1.cc: New test.
* testsuite/std/time/month_day_last/1.cc: New test.
* testsuite/std/time/month_weekday/1.cc: New test.
* testsuite/std/time/month_weekday_last/1.cc: New test.
* testsuite/std/time/weekday/1.cc: New test.
* testsuite/std/time/weekday_indexed/1.cc: New test.
* testsuite/std/time/weekday_last/1.cc: New test.
* testsuite/std/time/year/1.cc: New test.
* testsuite/std/time/year_month/1.cc: New test.
* testsuite/std/time/year_month_day/1.cc: New test.
* testsuite/std/time/year_month_day_last/1.cc: New test.
* testsuite/std/time/year_month_weekday/1.cc: New test.
* testsuite/std/time/year_month_weekday_last/1.cc: New test.

aarch64: Update feature macro name

GCC used the name __ARM_FEATURE_SVE_VECTOR_OPERATIONS, but in the
final spec it was renamed to__ARM_FEATURE_SVE_VECTOR_OPERATORS.

gcc/
* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins): Rename
__ARM_FEATURE_SVE_VECTOR_OPERATIONS to
__ARM_FEATURE_SVE_VECTOR_OPERATORS.

gcc/testsuite/
* gcc.target/aarch64/sve/acle/general/attributes_1.c: Rename
__ARM_FEATURE_SVE_VECTOR_OPERATIONS to
__ARM_FEATURE_SVE_VECTOR_OPERATORS.

aarch64: Tweaks to the handling of fixed-length SVE types

This patch is really four things rolled into one, since separating
them seemed artificial:

- Update the mangling of the fixed-length SVE ACLE types to match
  the upcoming spec.  The idea is to mangle:

    VLAT __attribute__((arm_sve_vector_bits(N)))

  as an instance __SVE_VLS<VLAT, N> of the template:

    __SVE_VLS<typename, unsigned>

- Give the fixed-length types their own TYPE_DECL.  This is needed
  to make the above mangling fix work, but should also be a minor
  QoI improvement for error reporting.  Unfortunately, the names are
  quite verbose, e.g.:

    svint8_t __attribute__((arm_sve_vector_bits(512)))

  but anything shorter would be ad-hoc syntax and so might be more
  confusing.

- Improve the error message reported when arm_sve_vector_bits is
  applied to tuples, such as:

    svint32x2_t __attribute__((arm_sve_vector_bits(N)))

  Previously we would complain that the type isn't an SVE type;
  now we complain that it isn't a vector type.

- Don't allow arm_sve_vector_bits(N) to be applied to existing
  fixed-length SVE types.

gcc/
* config/aarch64/aarch64-sve-builtins.cc (add_sve_type_attribute):
Take the ACLE name of the type as a parameter and add it as fourth
argument to the "SVE type" attribute.
(register_builtin_types): Update call accordingly.
(register_tuple_type): Likewise.  Construct the name of the type
earlier in order to do this.
(get_arm_sve_vector_bits_attributes): New function.
(handle_arm_sve_vector_bits_attribute): Report a more sensible
error message if the attribute is applied to an SVE tuple type.
Don't allow the attribute to be applied to an existing fixed-length
SVE type.  Mangle the new type as __SVE_VLS<type, vector-bits>.
Add a dummy TYPE_DECL to the new type.

gcc/testsuite/
* g++.target/aarch64/sve/acle/general-c++/attributes_2.C: New test.
* g++.target/aarch64/sve/acle/general-c++/mangle_6.C: Likewise.
* g++.target/aarch64/sve/acle/general-c++/mangle_7.C: Likewise.
* g++.target/aarch64/sve/acle/general-c++/mangle_8.C: Likewise.
* g++.target/aarch64/sve/acle/general-c++/mangle_9.C: Likewise.
* g++.target/aarch64/sve/acle/general-c++/mangle_10.C: Likewise.
* gcc.target/aarch64/sve/acle/general/attributes_7.c: Check the
error messages reported when arm_sve_vector_bits is applied to
SVE tuple types or to existing fixed-length SVE types.

aarch64: Update the mangling of single SVE vectors and predicates

GCC was implementing an old mangling scheme for single SVE
vectors and predicates (based on the Advanced SIMD one).
The final definition instead put them in the vendor built-in
namespace via the "u" prefix.

gcc/
* config/aarch64/aarch64-sve-builtins.cc (DEF_SVE_TYPE): Add a
leading "u" to each mangled name.

gcc/testsuite/
* g++.target/aarch64/sve/acle/general-c++/mangle_1.C: Add a leading
"u" to the mangling of each SVE vector and predicate type.
* g++.target/aarch64/sve/acle/general-c++/mangle_2.C: Likewise.
* g++.target/aarch64/sve/acle/general-c++/mangle_3.C: Likewise.
* g++.target/aarch64/sve/acle/general-c++/mangle_5.C: Likewise.

tree-optimization/96548 - fix failure to recompute RPO after CFG change

This recomputes RPO after store-motion changes the CFG.

2020-08-25  Richard Biener  <rguenther@suse.de>

PR tree-optimization/96548
PR tree-optimization/96760
* tree-ssa-loop-im.c (tree_ssa_lim): Recompute RPO after
store-motion.

* gcc.dg/torture/pr96548.c: New testcase.
* gcc.dg/torture/pr96760.c: Likewise.

gimple: Ignore *0 = {CLOBBER} in path isolation [PR96722]

Clobbers of MEM_REF with NULL address are just fancy nops, something we just
ignore and don't emit any code for it (ditto for other clobbers), they just
mark end of life on something, so we shouldn't infer from those that there
is some UB.

2020-08-25  Jakub Jelinek  <jakub@redhat.com>

PR tree-optimization/96722
* gimple.c (infer_nonnull_range): Formatting fix.
(infer_nonnull_range_by_dereference): Return false for clobber stmts.

* g++.dg/opt/pr96722.C: New test.

strlen: Fix handle_builtin_string_cmp [PR96758]

The following testcase is miscompiled, because handle_builtin_string_cmp
sees a strncmp call with constant last argument 4, where one of the strings
has an upper bound of 5 bytes (due to it being an array of that size) and
the other has a known string length of 1 and the result is used only in
equality comparison.
It is folded into __builtin_strncmp_eq (str1, str2, 4), which is
incorrect, because that means reading 4 bytes from both strings and
comparing that.  When one of the strings has known strlen of 1, we want to
compare just 2 bytes, not 4, as strncmp shouldn't compare any bytes beyond
the null.
So, the last argument to __builtin_strncmp_eq should be the minimum of the
provided strncmp last argument and the known string length + 1 (assuming
the other string has only a known upper bound due to array size).

Besides that, I've noticed the code has been written with the intent to also
support the case where we know exact string length of both strings (but not
the string content, so we can't compute it at compile time).  In that case,
both cstlen1 and cstlen2 are non-negative and both arysiz1 and arysiz2 are
negative.  We wouldn't optimize that, cmpsiz would be either the strncmp
last argument, or for strcmp the first string length, but varsiz would be
-1 and thus cmpsiz would be never < varsiz.  The patch fixes it by using the
correct length, in that case using the minimum of the two and for strncmp
also the last argument.

2020-08-25  Jakub Jelinek  <jakub@redhat.com>

PR tree-optimization/96758
* tree-ssa-strlen.c (handle_builtin_string_cmp): If both cstlen1
and cstlen2 are set, set cmpsiz to their minimum, otherwise use the
one that is set.  If bound is used and smaller than cmpsiz, set cmpsiz
to bound.  If both cstlen1 and cstlen2 are set, perform the optimization.

* gcc.dg/strcmpopt_12.c: New test.

sra: Bail out when encountering accesses with negative offsets (PR 96730)

I must admit I was quite surprised to see that SRA does not disqualify
an aggregate from any transformations when it encounters an offset for
which get_ref_base_and_extent returns a negative offset.  It may not
matter too much because I sure hope such programs always have
undefined behavior (SRA candidates are local variables on stack) but
it is probably better not to perform weird transformations on them as
build ref model with the new build_reconstructed_reference function
currently happily do for negative offsets (they just copy the existing
expression which is then used as the expression of a "propagated"
access) and of course the compiler must not ICE (as it currently does
because the SRA forest verifier does not like the expression).

gcc/ChangeLog:

2020-08-24  Martin Jambor  <mjambor@suse.cz>

PR tree-optimization/96730
* tree-sra.c (create_access): Disqualify any aggregate with negative
offset access.
(build_ref_for_model): Add assert that offset is non-negative.

gcc/testsuite/ChangeLog:

2020-08-24  Martin Jambor  <mjambor@suse.cz>

PR tree-optimization/96730
* gcc.dg/tree-ssa/pr96730.c: New test.

Fix a typo in rtl.def

gcc/
* rtl.def: Fix typo in comment.

middle-end: PR tree-optimization/21137: STRIP_NOPS avoids missed optimization.

PR tree-optimization/21137 is now an old enhancement request pointing out
that an optimization I added back in 2006, to optimize "((x>>31)&64) != 0"
as "x < 0", doesn't fire in the presence of unanticipated type conversions.
The fix is to call STRIP_NOPS at the appropriate point.

2020-08-25  Roger Sayle  <roger@nextmovesoftware.com>

gcc/ChangeLog
PR tree-optimization/21137
* fold-const.c (fold_binary_loc) [NE_EXPR/EQ_EXPR]: Call
STRIP_NOPS when checking whether to simplify ((x>>C1)&C2) != 0.

gcc/testsuite/ChangeLog
PR tree-optimization/21137
* gcc.dg/pr21137.c: New test.

MIPS: Fix __builtin_longjmp (PR 64242)

The problem here is mips has its own builtin_longjmp
pattern and it was not fixed when expand_builtin_longjmp
was fixed.  We need to read the new fp and gp before
restoring the stack as the buffer might be a local
variable.

2020-08-25  Andrew Pinski  <apinski@marvell.com>

gcc/ChangeLog:

PR middle-end/64242
* config/mips/mips.md (builtin_longjmp): Restore the frame
pointer and stack pointer and gp.

debug/96690 - mangle symbols eventually used by late dwarf output

The following makes sure to, at early debug generation time, mangle
symbols we eventually end up outputting during late finish.

2020-08-24  Richard Biener  <rguenther@suse.de>

PR debug/96690
* dwarf2out.c (reference_to_unused): Make FUNCTION_DECL
processing more consistent with respect to
symtab->global_info_ready.
(tree_add_const_value_attribute): Unconditionally call
rtl_for_decl_init to do all mangling early but throw
away the result if early_dwarf.

* g++.dg/lto/pr96690_0.C: New testcase.

Refine typo to fix ICE.

2020-08-24  Hongtao Liu  <hongtao.liu@intel.com>

gcc/ChangeLog:
PR target/96755
* config/i386/sse.md: Correct the mode of NOT operands to
SImode.

gcc/testsuite/ChangeLog:

* gcc.target/i386/pr96755.c: New test.

match.pd: Simplify copysign (x, -x) to -x [PR96715]

The following patch implements an optimization suggested in the PR,
copysign(x,-x) can be optimized into -x (even without -ffast-math,
should work fine even for signed zeros and infinities or nans).

2020-08-25  Jakub Jelinek  <jakub@redhat.com>

PR tree-optimization/96715
* match.pd (copysign(x,-x) -> -x): New simplification.

* gcc.dg/tree-ssa/copy-sign-3.c: New test.

c++: Fix up ptr.~PTR () handling [PR96721]

The following testcase is miscompiled, because build_trivial_dtor_call
handles the case when instance is a pointer by adding a clobber to what
the pointer points to (which is desirable e.g. for delete) rather than the
pointer itself.  That is I think always desirable behavior for references,
but for pointers for the pseudo dtor case it is not.

2020-08-25  Jakub Jelinek  <jakub@redhat.com>

PR c++/96721
* cp-tree.h (build_trivial_dtor_call): Add bool argument defaulted
to false.
* call.c (build_trivial_dtor_call): Add NO_PTR_DEREF argument.  If
instance is a pointer and NO_PTR_DEREF is true, clobber the pointer
rather than what it points to.
* semantics.c (finish_call_expr): Call build_trivial_dtor_call with
true as NO_PTR_DEREF.

* g++.dg/opt/flifetime-dse8.C: New test.

gimple-fold: Don't optimize wierdo floating point value reads [PR95450]

My patch to introduce native_encode_initializer to fold_ctor_reference
apparently broke gnulib/m4 on powerpc64.
There it uses a const union with two doubles and corresponding IBM double
double long double which actually is the largest normalizable long double
value (1 ulp higher than __LDBL_MAX__).  The reason our __LDBL_MAX__ is
smaller is that we internally treat the double double type as one having
106-bit precision, but it actually has a variable 53-bit to 2000-ish bit precision
and for the
0x1.fffffffffffff7ffffffffffffc000p+1023L
value gnulib uses we need 107-bit precision, therefore for GCC __LDBL_MAX__
is
0x1.fffffffffffff7ffffffffffff8000p+1023L
Before my changes, we wouldn't be able to fold_ctor_reference it and it
worked fine at runtime, but with the change we are able to do that, but
because it is larger than anything we can handle internally, we treat it
weirdly.  Similar problem would be if somebody creates this way valid,
but much more than 106 bit precision e.g. 1.0 + 1.0e-768.
Now, I think similar problem could happen e.g. on i?86/x86_64 with long
double there, it also has some weird values in the format, e.g. the
unnormals, pseudo infinities and various other magic values.

This patch for floating point types (including vector and complex types
with such elements) will try to encode the returned value again and punt
if it has different memory representation from the original.  Note, this
is only done in the path where native_encode_initializer was used, in order
not to affect e.g. just reading an unpunned long double value; the value
should be compiler generated in that case and thus should be properly
representable.  It will punt also if e.g. the padding bits are initialized
to non-zero values.

I think the verification that what we encode can be interpreted back
woiuld be only an internal consistency check (so perhaps for ENABLE_CHECKING
if flag_checking only, but if both directions perform it, then we need
to avoid mutual recursion).
While for the other direction (interpretation), at least for the broken by
design long doubles we just know we can't represent in GCC all valid values.
The other floating point formats are just theoretical case, perhaps we would
canonicalize something to a value that wouldn't trigger invalid exception
when without canonicalization it would trigger it at runtime, so let's just
ignore those.

Adjusted (so far untested) patch to do it in native_interpret_real instead
and limit it to the MODE_COMPOSITE_P cases, for which e.g.
fold-const.c/simplify-rtx.c punts in several other places too because we just
know we can't represent everything.

E.g.
      /* Don't constant fold this floating point operation if the
         result may dependent upon the run-time rounding mode and
         flag_rounding_math is set, or if GCC's software emulation
         is unable to accurately represent the result.  */
      if ((flag_rounding_math
           || (MODE_COMPOSITE_P (mode) && !flag_unsafe_math_optimizations))
          && (inexact || !real_identical (&result, &value)))
        return NULL_TREE;
Or perhaps guard it with MODE_COMPOSITE_P (mode) && !flag_unsafe_math_optimizations
too, thus break what gnulib / m4 does with -ffast-math, but not normally?

2020-08-25  Jakub Jelinek  <jakub@redhat.com>

PR target/95450
* fold-const.c (native_interpret_real): For MODE_COMPOSITE_P modes
punt if the to be returned REAL_CST does not encode to the bitwise
same representation.

* gcc.target/powerpc/pr95450.c: New test.

c++: Emit as-base 'tor symbols for final class.  [PR95428]

For PR70462 I stopped emitting the as-base constructor and destructor
variants for final classes, because they can never be called.  Except that
it turns out that clang calls base variants from complete variants, even for
classes with virtual bases, and in some cases inlines them such that the
calls to the base variant are exposed.  So we need to continue to emit the
as-base symbols, even though they're unreachable by G++-compiled code.

gcc/cp/ChangeLog:

PR c++/95428
* optimize.c (populate_clone_array): Revert PR70462 change.
(maybe_clone_body): Likewise.

gcc/testsuite/ChangeLog:

* g++.dg/other/final8.C: Adjust expected output.

Daily bump.

libbacktrace: add Mach-O 64-bit FAT support

libbacktrace/:
* macho.c (MACH_O_MH_MAGIC_FAT_64): Define.
(MACH_O_MH_CIGAM_FAT_64): Define.
(struct macho_fat_arch_64): Define.
(macho_add_fat): Add and use is_64 parameter.
(macho_add): Recognize 64-bit fat files.

doc: Switch valgrind.com to https

gcc/ChangeLog:
* doc/install.texi (Configuration): Switch valgrind.com to https.

libstdc++: Add deduction guide for std::ranges::join_view [LWG 3474]

This implements the proposed resolution for LWG 3474.

libstdc++-v3/ChangeLog:

* include/std/ranges (join_view): Add deduction guide (LWG 3474).
* testsuite/std/ranges/adaptors/join_lwg3474.cc: New test.

libstdc++: Fix std::indirectly_readable ambiguity [LWG 3446]

This implements the proposed resolution of LWG 3446. I'm also adding
another new constrained specialization which isn't proposed by 3446, to
resolve the ambiguity when a type has both value_type and element_type
but denoting different types.

libstdc++-v3/ChangeLog:

* include/bits/iterator_concepts.h (indirectly_readable): Add
partial specializations to resolve ambiguities (LWG 3446).
* testsuite/24_iterators/associated_types/readable.traits.cc:
Check types with both value_type and element_type.

libstdc++: Fix iota_view::size() to avoid overflow

This avoids the overflow that occurs when negating the most negative
value of an integral type.

Also prevent returning signed int when the values have lower rank and
promote to int.

libstdc++-v3/ChangeLog:

* include/std/ranges (ranges::iota_view::size()): Perform all
calculations in the right unsigned types.
* testsuite/std/ranges/iota/size.cc: New test.

libstdc++: Make variant_npos conversions explicit [PR 96766]

libstdc++-v3/ChangeLog:

PR libstdc++/96766
* include/std/variant (_Variant_storage): Replace implicit
conversions from size_t to __index_type with explicit casts.

libstdc++: Fix 30_threads/packaged_task/cons/alloc.cc regression

libstdc++-v3/ChangeLog:

* testsuite/30_threads/packaged_task/cons/alloc.cc: Run for
C++11 and skip for C++17 or later.

c++: overload dumper

I frequently need to look at overload sets, and debug_node spews more
information than is useful, most of the time.  Here's a dumper for
overloads, that just tells you their full name and where they came from.

gcc/cp
* ptree.c (debug_overload): New.

Fortran  :  get_environment_variable runtime error PR96486

Runtime error occurs when the type of the value argument is
character(0):  "Zero-length string passed as value...".
The status argument, intent(out), will contain -1 if the value
of the environment is too large to fit in the value argument, this
is the case if the type is character(0) so there is no reason to
produce a runtime error if the value argument is zero length.

2020-08-24  Mark Eggleston  <markeggleston@gcc.gnu.org>

libgfortran/

PR fortran/96486
* intrinsics/env.c: If value_len is > 0 blank the string.
Copy the result only if its length is > 0.

2020-08-24  Mark Eggleston  <markeggleston@gcc.gnu.org>

gcc/testsuite/

PR fortran/96486
* gfortran.dg/pr96486.f90: New test.

arm: Fix -mpure-code support/-mslow-flash-data for armv8-m.base [PR94538]

armv8-m.base (cortex-m23) has the movt instruction, so we need to
disable the define_split to generate a constant in this case,
otherwise we get incorrect insn constraints as described in PR94538.

We also need to fix the pure-code alternative for thumb1_movsi_insn
because the assembler complains with instructions like
movs r0, #:upper8_15:1234
(Internal error in md_apply_fix)
We now generate movs r0, 4 instead.

2020-08-24  Christophe Lyon  <christophe.lyon@linaro.org>

PR target/94538
gcc/
* config/arm/thumb1.md: Disable set-constant splitter when
TARGET_HAVE_MOVT.
(thumb1_movsi_insn): Fix -mpure-code
alternative.

PR target/94538
gcc/testsuite/
* gcc.target/arm/pure-code/pr94538-1.c: New test.
* gcc.target/arm/pure-code/pr94538-2.c: New test.

SLP: support entire BB.

gcc/ChangeLog:

* tree-vect-data-refs.c (dr_group_sort_cmp): Work on
data_ref_pair.
(vect_analyze_data_ref_accesses): Work on groups.
(vect_find_stmt_data_reference): Add group_id argument and fill
up dataref_groups vector.
* tree-vect-loop.c (vect_get_datarefs_in_loop): Pass new
arguments.
(vect_analyze_loop_2): Likewise.
* tree-vect-slp.c (vect_slp_analyze_bb_1): Pass argument.
(vect_slp_bb_region): Likewise.
(vect_slp_region): Likewise.
(vect_slp_bb):Work on the entire BB.
* tree-vectorizer.h (vect_analyze_data_ref_accesses): Add new
argument.
(vect_find_stmt_data_reference): Likewise.

gcc/testsuite/ChangeLog:

* gcc.dg/vect/bb-slp-38.c: Adjust pattern as now we only process
a single vectorization and now 2 partial.
* gcc.dg/vect/bb-slp-45.c: New test.

Add missing vn_reference_t::punned initialization

gcc/ChangeLog:

PR tree-optimization/96597
* tree-ssa-sccvn.c (vn_reference_lookup_call): Add missing
initialization of ::punned.
(vn_reference_insert): Use consistently false instead of 0.
(vn_reference_insert_pieces): Likewise.

Fix libstdc++ testsuite to handle VxWorks gthreads implementation

When implementing the support for gthreads in VxWorks, we stumbled on
a problem in the testsuite. In the libstdc++ testsuite, we
indiscriminately add the `-pthread` switch to the tests that require
linking against the pthread library. In certain cases, such as
VxWorks, the gthread interface relies on the system native threads
lilbrary and the `-pthread` switch does not exist.

This patch adds a condition for the use of the `-pthread` switch. It
adds it only if the target supports it. The patch also adds
`dg-require-gthreads` in tests that were lacking it.

for libstdc++-v3/ChangeLog

* testsuite/20_util/shared_ptr/atomic/3.cc: Do not require POSIX
threads and add -pthread only on targets supporting them.
* testsuite/20_util/shared_ptr/thread/default_weaktoshared.cc:
Likewise.
* testsuite/20_util/shared_ptr/thread/mutex_weaktoshared.cc:
Likewise.
* testsuite/30_threads/async/42819.cc: Likewise.
* testsuite/30_threads/async/49668.cc: Likewise.
* testsuite/30_threads/async/54297.cc: Likewise.
* testsuite/30_threads/async/any.cc: Likewise.
* testsuite/30_threads/async/async.cc: Likewise.
* testsuite/30_threads/async/except.cc: Likewise.
* testsuite/30_threads/async/launch.cc: Likewise.
* testsuite/30_threads/async/lwg2021.cc: Likewise.
* testsuite/30_threads/async/sync.cc: Likewise. : Likewise.
* testsuite/30_threads/call_once/39909.cc: Likewise.
* testsuite/30_threads/call_once/49668.cc: Likewise.
* testsuite/30_threads/call_once/60497.cc: Likewise.
* testsuite/30_threads/call_once/call_once1.cc: Likewise.
* testsuite/30_threads/call_once/dr2442.cc: Likewise.
* testsuite/30_threads/condition_variable/54185.cc: Likewise.
* testsuite/30_threads/condition_variable/cons/1.cc: Likewise.
* testsuite/30_threads/condition_variable/members/1.cc: Likewise.
* testsuite/30_threads/condition_variable/members/2.cc: Likewise.
* testsuite/30_threads/condition_variable/members/3.cc: Likewise.
* testsuite/30_threads/condition_variable/members/53841.cc: Likewise.
* testsuite/30_threads/condition_variable/members/68519.cc: Likewise.
* testsuite/30_threads/condition_variable/native_handle/typesizes.cc:
Likewise.
* testsuite/30_threads/condition_variable_any/50862.cc: Likewise.
* testsuite/30_threads/condition_variable_any/53830.cc: Likewise.
* testsuite/30_threads/condition_variable_any/cond.cc: Likewise.
* testsuite/30_threads/condition_variable_any/cons/1.cc: Likewise.
* testsuite/30_threads/condition_variable_any/members/1.cc: Likewise.
* testsuite/30_threads/condition_variable_any/members/2.cc: Likewise.
* testsuite/30_threads/future/cons/move.cc: Likewise.
* testsuite/30_threads/future/members/45133.cc: Likewise.
* testsuite/30_threads/future/members/get.cc: Likewise.
* testsuite/30_threads/future/members/get2.cc: Likewise.
* testsuite/30_threads/future/members/share.cc: Likewise.
* testsuite/30_threads/future/members/valid.cc: Likewise.
* testsuite/30_threads/future/members/wait.cc: Likewise.
* testsuite/30_threads/future/members/wait_for.cc: Likewise.
* testsuite/30_threads/future/members/wait_until.cc: Likewise.
* testsuite/30_threads/lock/1.cc: Likewise.
* testsuite/30_threads/lock/2.cc: Likewise.
* testsuite/30_threads/lock/3.cc: Likewise.
* testsuite/30_threads/lock/4.cc: Likewise.
* testsuite/30_threads/mutex/cons/1.cc: Likewise.
* testsuite/30_threads/mutex/dest/destructor_locked.cc: Likewise.
* testsuite/30_threads/mutex/lock/1.cc: Likewise.
* testsuite/30_threads/mutex/native_handle/1.cc: Likewise.
* testsuite/30_threads/mutex/native_handle/typesizes.cc: Likewise.
* testsuite/30_threads/mutex/try_lock/1.cc: Likewise.
* testsuite/30_threads/mutex/try_lock/2.cc: Likewise.
* testsuite/30_threads/mutex/unlock/1.cc: Likewise.
* testsuite/30_threads/mutex/unlock/2.cc: Likewise.
* testsuite/30_threads/packaged_task/49668.cc: Likewise.
* testsuite/30_threads/packaged_task/60564.cc: Likewise.
* testsuite/30_threads/packaged_task/cons/1.cc: Likewise.
* testsuite/30_threads/packaged_task/cons/2.cc: Likewise.
* testsuite/30_threads/packaged_task/cons/3.cc: Likewise.
* testsuite/30_threads/packaged_task/cons/56492.cc: Likewise.
* testsuite/30_threads/packaged_task/cons/alloc.cc: Likewise.
* testsuite/30_threads/packaged_task/cons/move.cc: Likewise.
* testsuite/30_threads/packaged_task/cons/move_assign.cc: Likewise.
* testsuite/30_threads/packaged_task/members/at_thread_exit.cc:
Likewise.
* testsuite/30_threads/packaged_task/members/get_future.cc: Likewise.
* testsuite/30_threads/packaged_task/members/get_future2.cc: Likewise.
* testsuite/30_threads/packaged_task/members/invoke.cc: Likewise.
* testsuite/30_threads/packaged_task/members/invoke2.cc: Likewise.
* testsuite/30_threads/packaged_task/members/invoke3.cc: Likewise.
* testsuite/30_threads/packaged_task/members/invoke4.cc: Likewise.
* testsuite/30_threads/packaged_task/members/invoke5.cc: Likewise.
* testsuite/30_threads/packaged_task/members/reset.cc: Likewise.
* testsuite/30_threads/packaged_task/members/reset2.cc: Likewise.
* testsuite/30_threads/packaged_task/members/swap.cc: Likewise.
* testsuite/30_threads/packaged_task/members/valid.cc: Likewise.
* testsuite/30_threads/promise/60966.cc: Likewise.
* testsuite/30_threads/promise/cons/1.cc: Likewise.
* testsuite/30_threads/promise/cons/alloc.cc: Likewise.
* testsuite/30_threads/promise/cons/move.cc: Likewise.
* testsuite/30_threads/promise/cons/move_assign.cc: Likewise.
* testsuite/30_threads/promise/members/at_thread_exit.cc: Likewise.
* testsuite/30_threads/promise/members/at_thread_exit2.cc: Likewise.
* testsuite/30_threads/promise/members/get_future.cc: Likewise.
* testsuite/30_threads/promise/members/get_future2.cc: Likewise.
* testsuite/30_threads/promise/members/set_exception.cc: Likewise.
* testsuite/30_threads/promise/members/set_exception2.cc: Likewise.
* testsuite/30_threads/promise/members/set_value.cc: Likewise.
* testsuite/30_threads/promise/members/set_value2.cc: Likewise.
* testsuite/30_threads/promise/members/set_value3.cc: Likewise.
* testsuite/30_threads/promise/members/swap.cc: Likewise.
* testsuite/30_threads/recursive_mutex/cons/1.cc: Likewise.
* testsuite/30_threads/recursive_mutex/dest/destructor_locked.cc:
Likewise.
* testsuite/30_threads/recursive_mutex/lock/1.cc: Likewise.
* testsuite/30_threads/recursive_mutex/native_handle/1.cc: Likewise.
* testsuite/30_threads/recursive_mutex/native_handle/typesizes.cc:
Likewise.
* testsuite/30_threads/recursive_mutex/try_lock/1.cc: Likewise.
* testsuite/30_threads/recursive_mutex/try_lock/2.cc: Likewise.
* testsuite/30_threads/recursive_mutex/unlock/1.cc: Likewise.
* testsuite/30_threads/recursive_mutex/unlock/2.cc: Likewise.
* testsuite/30_threads/recursive_timed_mutex/cons/1.cc: Likewise.
* testsuite/30_threads/recursive_timed_mutex/dest/destructor_locked.cc:
Likewise.
* testsuite/30_threads/recursive_timed_mutex/lock/1.cc: Likewise.
* testsuite/30_threads/recursive_timed_mutex/lock/2.cc: Likewise.
* testsuite/30_threads/recursive_timed_mutex/native_handle/1.cc:
Likewise.
* testsuite/30_threads/recursive_timed_mutex/native_handle/typesizes.cc:
Likewise.
* testsuite/30_threads/recursive_timed_mutex/try_lock/1.cc: Likewise.
* testsuite/30_threads/recursive_timed_mutex/try_lock/2.cc: Likewise.
* testsuite/30_threads/recursive_timed_mutex/try_lock_for/1.cc:
Likewise.
* testsuite/30_threads/recursive_timed_mutex/try_lock_for/2.cc:
Likewise.
* testsuite/30_threads/recursive_timed_mutex/try_lock_for/3.cc:
Likewise.
* testsuite/30_threads/recursive_timed_mutex/try_lock_until/1.cc:
Likewise.
* testsuite/30_threads/recursive_timed_mutex/try_lock_until/2.cc:
Likewise.
* testsuite/30_threads/recursive_timed_mutex/unlock/1.cc: Likewise.
* testsuite/30_threads/recursive_timed_mutex/unlock/2.cc: Likewise.
* testsuite/30_threads/shared_future/cons/move.cc: Likewise.
* testsuite/30_threads/shared_future/members/45133.cc: Likewise.
* testsuite/30_threads/shared_future/members/get.cc: Likewise.
* testsuite/30_threads/shared_future/members/get2.cc: Likewise.
* testsuite/30_threads/shared_future/members/valid.cc: Likewise.
* testsuite/30_threads/shared_future/members/wait.cc: Likewise.
* testsuite/30_threads/shared_future/members/wait_for.cc: Likewise.
* testsuite/30_threads/shared_future/members/wait_until.cc: Likewise.
* testsuite/30_threads/shared_lock/cons/1.cc: Likewise.
* testsuite/30_threads/shared_lock/cons/2.cc: Likewise.
* testsuite/30_threads/shared_lock/cons/3.cc: Likewise.
* testsuite/30_threads/shared_lock/cons/4.cc: Likewise.
* testsuite/30_threads/shared_lock/cons/5.cc: Likewise.
* testsuite/30_threads/shared_lock/cons/6.cc: Likewise.
* testsuite/30_threads/shared_lock/locking/1.cc: Likewise.
* testsuite/30_threads/shared_lock/locking/2.cc: Likewise.
* testsuite/30_threads/shared_lock/locking/3.cc: Likewise.
* testsuite/30_threads/shared_lock/locking/4.cc: Likewise.
* testsuite/30_threads/shared_lock/modifiers/1.cc: Likewise.
* testsuite/30_threads/shared_mutex/cons/1.cc: Likewise.
* testsuite/30_threads/shared_mutex/try_lock/1.cc: Likewise.
* testsuite/30_threads/shared_mutex/try_lock/2.cc: Likewise.
* testsuite/30_threads/shared_mutex/unlock/1.cc: Likewise.
* testsuite/30_threads/shared_timed_mutex/cons/1.cc: Likewise.
* testsuite/30_threads/shared_timed_mutex/try_lock/1.cc: Likewise.
* testsuite/30_threads/shared_timed_mutex/try_lock/2.cc: Likewise.
* testsuite/30_threads/shared_timed_mutex/try_lock/3.cc: Likewise.
* testsuite/30_threads/shared_timed_mutex/unlock/1.cc: Likewise.
* testsuite/30_threads/this_thread/1.cc: Likewise.
* testsuite/30_threads/this_thread/sleep_for-mt.cc: Likewise.
* testsuite/30_threads/this_thread/sleep_until-mt.cc: Likewise.
* testsuite/30_threads/thread/cons/1.cc: Likewise.
* testsuite/30_threads/thread/cons/2.cc: Likewise.
* testsuite/30_threads/thread/cons/3.cc: Likewise.
* testsuite/30_threads/thread/cons/4.cc: Likewise.
* testsuite/30_threads/thread/cons/49668.cc: Likewise.
* testsuite/30_threads/thread/cons/5.cc: Likewise.
* testsuite/30_threads/thread/cons/6.cc: Likewise.
* testsuite/30_threads/thread/cons/7.cc: Likewise.
* testsuite/30_threads/thread/cons/8.cc: Likewise.
* testsuite/30_threads/thread/cons/9.cc: Likewise.
* testsuite/30_threads/thread/cons/moveable.cc: Likewise.
* testsuite/30_threads/thread/cons/terminate.cc: Likewise.
* testsuite/30_threads/thread/members/1.cc: Likewise.
* testsuite/30_threads/thread/members/2.cc: Likewise.
* testsuite/30_threads/thread/members/3.cc: Likewise.
* testsuite/30_threads/thread/members/4.cc: Likewise.
* testsuite/30_threads/thread/members/5.cc: Likewise.
* testsuite/30_threads/thread/members/hardware_concurrency.cc:
Likewise.
* testsuite/30_threads/thread/native_handle/typesizes.cc: Likewise.
* testsuite/30_threads/thread/swap/1.cc: Likewise.
* testsuite/30_threads/timed_mutex/cons/1.cc: Likewise.
* testsuite/30_threads/timed_mutex/dest/destructor_locked.cc:
Likewise.
* testsuite/30_threads/timed_mutex/lock/1.cc: Likewise.
* testsuite/30_threads/timed_mutex/native_handle/1.cc: Likewise.
* testsuite/30_threads/timed_mutex/native_handle/typesizes.cc:
Likewise.
* testsuite/30_threads/timed_mutex/try_lock/1.cc: Likewise.
* testsuite/30_threads/timed_mutex/try_lock/2.cc: Likewise.
* testsuite/30_threads/timed_mutex/try_lock_for/1.cc: Likewise.
* testsuite/30_threads/timed_mutex/try_lock_for/2.cc: Likewise.
* testsuite/30_threads/timed_mutex/try_lock_for/3.cc: Likewise.
* testsuite/30_threads/timed_mutex/try_lock_until/1.cc: Likewise.
* testsuite/30_threads/timed_mutex/try_lock_until/2.cc: Likewise.
* testsuite/30_threads/timed_mutex/try_lock_until/57641.cc: Likewise.
* testsuite/30_threads/timed_mutex/unlock/1.cc: Likewise.
* testsuite/30_threads/timed_mutex/unlock/2.cc: Likewise.
* testsuite/30_threads/try_lock/1.cc: Likewise.
* testsuite/30_threads/try_lock/2.cc: Likewise.
* testsuite/30_threads/try_lock/3.cc: Likewise.
* testsuite/30_threads/try_lock/4.cc: Likewise.
* testsuite/30_threads/unique_lock/cons/1.cc: Likewise.
* testsuite/30_threads/unique_lock/cons/2.cc: Likewise.
* testsuite/30_threads/unique_lock/cons/3.cc: Likewise.
* testsuite/30_threads/unique_lock/cons/4.cc: Likewise.
* testsuite/30_threads/unique_lock/cons/5.cc: Likewise.
* testsuite/30_threads/unique_lock/cons/6.cc: Likewise.
* testsuite/30_threads/unique_lock/locking/1.cc: Likewise.
* testsuite/30_threads/unique_lock/locking/2.cc: Likewise.
* testsuite/30_threads/unique_lock/locking/3.cc: Likewise.
* testsuite/30_threads/unique_lock/locking/4.cc: Likewise.
* testsuite/30_threads/unique_lock/modifiers/1.cc: Likewise.

reorg.c (fill_slots_from_thread): Improve for TARGET_FLAGS_REGNUM

This handles TARGET_FLAGS_REGNUM clobbering insns as delay-slot
fillers using a method similar to that in commit 33c2207d3fda,
where care was taken for fill_simple_delay_slots to allow such
insns when scanning for delay-slot fillers *backwards* (before
the insn).

A TARGET_FLAGS_REGNUM target is typically a former cc0 target.
For cc0 targets, insns don't mention clobbering cc0, so the
clobbers are mentioned in the "resources" only as a special
entity and only for compare-insns and branches, where the cc0
value matters.

In contrast, with TARGET_FLAGS_REGNUM, most insns clobber it and
the register liveness detection in reorg.c / resource.c treats
that as a blocker (for other insns mentioning it, i.e. most)
when looking for delay-slot-filling candidates.  This means that
when comparing core and performance for a delay-slot cc0 target
before and after the de-cc0 conversion, the inability to fill a
delay slot after conversion manifests as a regression.  This was
one such case, for CRIS, with random_bitstring in
gcc.c-torture/execute/arith-rand-ll.c as well as the target
libgcc division function.

After this, all known performance regressions compared to cc0
are fixed.

gcc:
PR target/93372
* reorg.c (fill_slots_from_thread): Allow trial insns that clobber
TARGET_FLAGS_REGNUM as delay-slot fillers.

gcc/testsuite:
PR target/93372
* gcc.target/cris/pr93372-47.c: New test.

Daily bump.

x86: Add target("general-regs-only") function attribute

gcc/

PR target/96744
* config/i386/i386-options.c (IX86_ATTR_IX86_YES): New.
(IX86_ATTR_IX86_NO): Likewise.
(ix86_opt_type): Add ix86_opt_ix86_yes and ix86_opt_ix86_no.
(ix86_valid_target_attribute_inner_p): Handle general-regs-only,
ix86_opt_ix86_yes and ix86_opt_ix86_no.
(ix86_option_override_internal): Check opts->x_ix86_target_flags
instead of opts->x_ix86_target_flags.
* doc/extend.texi: Document target("general-regs-only") function
attribute.

gcc/testsuite/

PR target/96744
* gcc.target/i386/pr96744-1.c: New test.
* gcc.target/i386/pr96744-2.c: Likewise.
* gcc.target/i386/pr96744-3a.c: Likewise.
* gcc.target/i386/pr96744-3b.c: Likewise.
* gcc.target/i386/pr96744-4.c: Likewise.
* gcc.target/i386/pr96744-5.c: Likewise.
* gcc.target/i386/pr96744-6.c: Likewise.
* gcc.target/i386/pr96744-7.c: Likewise.
* gcc.target/i386/pr96744-8a.c: Likewise.
* gcc.target/i386/pr96744-8b.c: Likewise.
* gcc.target/i386/pr96744-9.c: Likewise.

Changed to STOP 1 in unlimited_polymorphic_31.f03.

2020-08-23  Paul Thomas  <pault@gcc.gnu.org>

gcc/testsuite/
PR fortran/92785
* gfortran.dg/unlimited_polymorphic_31.f03: Change to stop 1.

Adding option -g to pr96737.f90.

2020-08-23  Paul Thomas  <pault@gcc.gnu.org>

gcc/testsuite/
PR fortran/96737
* gfortran.dg/pr96737.f90: Add option -g.

This patch fixes PR96737. See the explanatory comment in the testcase.

2020-08-23  Paul Thomas  <pault@gcc.gnu.org>

gcc/fortran
PR fortran/96737
* trans-types.c (gfc_get_derived_type): Derived types that are
used in submodules are not compatible with TYPE_CANONICAL from
any of the global namespaces.

gcc/testsuite/
PR fortran/96737
* gfortran.dg/pr96737.f90: New test.

Daily bump.

analyzer: fix NULL deref false positives [PR94851]

PR analyzer/94851 reports various false "NULL dereference" diagnostics.
The first case (comment #1) affects GCC 10.2 but no longer affects
trunk; I believe it was fixed by the state rewrite of
r11-2694-g808f4dfeb3a95f50f15e71148e5c1067f90a126d.

The patch adds a regression test for this case.

The other cases (comment #3 and comment #4) still affect trunk.
In both cases, the && in a conditional is optimized to bitwise &
  _1 = p_4 != 0B;
  _2 = p_4 != q_6(D);
  _3 = _1 & _2;
and the analyzer fails to fold this for the case where one (or both) of
the conditionals is false, and thus erroneously considers the path where
"p" is non-NULL despite being passed a NULL value.

Fix this by implementing folding for this case.

gcc/analyzer/ChangeLog:
PR analyzer/94851
* region-model-manager.cc
(region_model_manager::maybe_fold_binop): Fold bitwise "& 0" to 0.

gcc/testsuite/ChangeLog:
PR analyzer/94851
* gcc.dg/analyzer/pr94851-1.c: New test.
* gcc.dg/analyzer/pr94851-3.c: New test.
* gcc.dg/analyzer/pr94851-4.c: New test.

analyzer: simplify store::eval_alias

I have followup patches that add new conditions to store::eval_alias.
Rather than duplicate all conditions for symmetry, split it up and
call it on both (A, B) and (B, A).

gcc/analyzer/ChangeLog:
* store.cc (store::eval_alias): Make const.  Split out 2nd half
into store::eval_alias_1 and call it twice for symmetry, avoiding
test duplication.
(store::eval_alias_1): New function, split out from the above.
* store.h (store::eval_alias): Make const.
(store::eval_alias_1): New decl.

analyzer: simplify region_model::push_frame

region_model::push_frame was binding arguments for both the default SSA
name for each parameter, and the underlying parameter.

Simplify the generated states by only binding the default SSA name if
it exists, or the parameter if there is no default SSA name.

gcc/analyzer/ChangeLog:
* region-model.cc (region_model::push_frame): Bind the default
SSA name for each parm if it exists, falling back to the parm
itself otherwise, rather than doing both.

gcc/testsuite/ChangeLog:
* gcc.dg/analyzer/malloc-ipa-8-double-free.c: Drop
-fanalyzer-verbose-state-changes.

libgccjit: Update comments for gcc_jit_context_new_rvalue_from* functions

gcc/jit/ChangeLog

2020-08-06  Andrea Corallo  <andrea.corallo@arm.com>

* libgccjit.c:
(gcc_jit_context_new_rvalue_from_int)
(gcc_jit_context_new_rvalue_from_long)
(gcc_jit_context_new_rvalue_from_double)
(gcc_jit_context_new_rvalue_from_ptr): Update function heading
comments.

Daily bump.

Update links to Arm docs

gcc/
* doc/extend.texi: Update links to Arm docs.
* doc/invoke.texi: Likewise.

libstdc++: Do not check "cold" name on darwin [PR 96736]

libstdc++-v3/ChangeLog:

PR libstdc++/96736
* testsuite/17_intro/headers/c++1998/all_attributes.cc: Do not
test "cold" on darwin.
* testsuite/17_intro/headers/c++2011/all_attributes.cc:
Likewise.
* testsuite/17_intro/headers/c++2014/all_attributes.cc:
Likewise.
* testsuite/17_intro/headers/c++2017/all_attributes.cc:
Likewise.
* testsuite/17_intro/headers/c++2020/all_attributes.cc:
Likewise.

Using gen_int_mode instead of GEN_INT to avoid ICE caused by type promotion.

2020-07-22  Hongtao Liu  <hongtao.liu@intel.com>

gcc/
PR target/96262
* config/i386/i386-expand.c
(ix86_expand_vec_shift_qihi_constant): Refine.

gcc/testsuite/
* gcc.target/i386/pr96262-1.c: New test.

driver: Fix several memory leaks [PR63854]

This patch fixes several memory leaks in the driver, all of which relate
to the handling of static specs. We introduce functions
set_static_spec_{shared,owned}() which are used to enforce proper memory
management when updating the strings in the static_specs table.

This is achieved by making use of the alloc_p field in the table
entries. Similarly to set_spec(), each time we update an entry, we check
whether alloc_p is set, and free the old value if so. We then set
alloc_p correctly based on whether we "own" this memory or whether we're
just taking a pointer to a shared string which we shouldn't free.

The following table shows the number of leaks found by AddressSanitizer
when running a minimal libgccjit program on AArch64. The test program
does the whole libgccjit compilation cycle in a loop (including acquiring
and releasing the context), and the table below shows the number of leaks
for different iterations of that loop.

+--------------+-----+-----+------+---------------+
| # of runs >  | 1   | 2   | 3    | Leaks per run |
+--------------+-----+-----+------+---------------+
| Before patch | 463 | 940 | 1417 | 477           |
+--------------+-----+-----+------+---------------+
| After patch  | 416 | 846 | 1276 | 430           |
+--------------+-----+-----+------+---------------+

gcc/ChangeLog:

PR jit/63854
* gcc.c (set_static_spec): New.
(set_static_spec_owned): New.
(set_static_spec_shared): New.
(driver::maybe_putenv_COLLECT_LTO_WRAPPER): Use
set_static_spec_owned() to take ownership of lto_wrapper_file
such that it gets freed in driver::finalize.
(driver::maybe_run_linker): Use set_static_spec_shared() to
ensure that we don't try and free() the static string "ld",
also ensuring that any previously-allocated string in
linker_name_spec is freed. Likewise with argv0.
(driver::finalize): Use set_static_spec_shared() when resetting
specs that previously had allocated strings; remove if(0)
around call to free().

Allow try_split to split RTX_FRAME_RELATED_P insns

Instead of rejecting RTX_FRAME_RELATED_P insns, allow try_split to split
such insns, provided the split is after reload, and the result of the split
is a single insn.

recog.c:peep2_attempt already splits an RTX_FRAME_RELATED_P insn splitting
to a single insn. This patch refactors existing code copying frame related
info to a separate function (copy_frame_info_to_split_insn) and calls it
from both peep2_attempt and try_split.

2020-08-21  Senthil Kumar Selvaraj  <saaadhu@gcc.gnu.org>

gcc/ChangeLog:

* emit-rtl.c (try_split): Call copy_frame_info_to_split_insn
to split certain RTX_FRAME_RELATED_P insns.
* recog.c (copy_frame_info_to_split_insn): New function.
(peep2_attempt): Split copying of frame related info of
RTX_FRAME_RELATED_P insns into above function and call it.
* recog.h (copy_frame_info_to_split_insn): Declare it.

libstdc++: Skip PSTL tests when installed TBB is too old [PR 96718]

These tests do not actually require TBB, because they only inspect the
feature test macros present in the headers. However, if TBB is installed
then its headers will be included, and the version will be checked. If
the version is too old, compilation fails due to a #error directive.

This change disables the tests if TBB is not present, so that we skip
them instead of failing.

libstdc++-v3/ChangeLog:

PR libstdc++/96718
* testsuite/25_algorithms/pstl/feature_test-2.cc: Require
tbb-backend effective target.
* testsuite/25_algorithms/pstl/feature_test-3.cc: Likewise.
* testsuite/25_algorithms/pstl/feature_test-5.cc: Likewise.
* testsuite/25_algorithms/pstl/feature_test.cc: Likewise.

Enable bitwise operation for type mask.

Enable operator or/xor/and/andn/not for mask register, kxnor is not
enabled since there's no corresponding instruction for general
registers.

gcc/
PR target/88808
* config/i386/i386.c (ix86_preferred_reload_class): Allow
QImode data go into mask registers.
* config/i386/i386.md: (*movhi_internal): Adjust constraints
for mask registers.
(*movqi_internal): Ditto.
(*anddi_1): Support mask register operations
(*and<mode>_1): Ditto.
(*andqi_1): Ditto.
(*andn<mode>_1): Ditto.
(*<code><mode>_1): Ditto.
(*<code>qi_1): Ditto.
(*one_cmpl<mode>2_1): Ditto.
(*one_cmplsi2_1_zext): Ditto.
(*one_cmplqi2_1): Ditto.
(define_peephole2): Move constant 0/-1 directly into mask
registers.
* config/i386/predicates.md (mask_reg_operand): New predicate.
* config/i386/sse.md (define_split): Add post-reload splitters
that would convert "generic" patterns to mask patterns.
(*knotsi_1_zext): New define_insn.

gcc/testsuite/
* gcc.target/i386/bitwise_mask_op-1.c: New test.
* gcc.target/i386/bitwise_mask_op-2.c: New test.
* gcc.target/i386/bitwise_mask_op-3.c: New test.
* gcc.target/i386/avx512bw-pr88465.c: New testcase.
* gcc.target/i386/avx512bw-kunpckwd-1.c: Adjust testcase.
* gcc.target/i386/avx512bw-kunpckwd-3.c: Ditto.
* gcc.target/i386/avx512dq-kmovb-5.c: Ditto.
* gcc.target/i386/avx512f-kmovw-5.c: Ditto.
* gcc.target/i386/pr55342.c: Ditto.

According to instruction_tables.pdf

1. Set cost of movement inside mask registers a bit higher than gpr's.
2. Set cost of movement between mask register and gpr much higher than movement
   inside gpr, but still less equal than load/store.
3. Set cost of mask register load/store a bit higher than gpr load/store.

gcc/
* config/i386/x86-tune-costs.h (skylake_cost): Adjust cost
model.

Enable direct movement between gpr and mask registers in pass_reload.

Changelog
gcc/
* config/i386/i386.c (inline_secondary_memory_needed):
No memory is needed between mask regs and gpr.
(ix86_hard_regno_mode_ok): Add condition TARGET_AVX512F for
mask regno.
* config/i386/i386.h (enum reg_class): Add INT_MASK_REGS.
(REG_CLASS_NAMES): Ditto.
(REG_CLASS_CONTENTS): Ditto.
* config/i386/i386.md: Exclude mask register in
define_peephole2 which is avaiable only for gpr.

gcc/testsuite/
* gcc.target/i386/spill_to_mask-1.c: New tests.
* gcc.target/i386/spill_to_mask-2.c: New tests.
* gcc.target/i386/spill_to_mask-3.c: New tests.
* gcc.target/i386/spill_to_mask-4.c: New tests.

x86: Add cost model for operation of mask registers.

gcc/

PR target/71453
* config/i386/i386.h (struct processor_costs): Add member
mask_to_integer, integer_to_mask, mask_load[3], mask_store[3],
mask_move.
* config/i386/x86-tune-costs.h (ix86_size_cost, i386_cost,
i386_cost, pentium_cost, lakemont_cost, pentiumpro_cost,
geode_cost, k6_cost, athlon_cost, k8_cost, amdfam10_cost,
bdver_cost, znver1_cost, znver2_cost, skylake_cost,
btver1_cost, btver2_cost, pentium4_cost, nocona_cost,
atom_cost, slm_cost, intel_cost, generic_cost, core_cost):
Initialize mask_load[3], mask_store[3], mask_move,
integer_to_mask, mask_to_integer for all target costs.
* config/i386/i386.c (ix86_register_move_cost): Using cost
model of mask registers.
(inline_memory_move_cost): Ditto.
(ix86_register_move_cost): Ditto.

analyzer: add regression tests [PR95152]

PR analyzer/95152 reports various ICEs in
region_model::get_or_create_mem_ref.

I removed this function as part of the state rewrite in
r11-2694-g808f4dfeb3a95f50f15e71148e5c1067f90a126d.
I've verified that these two test cases reproduce the issue with 10.2
and don't ICE with trunk; adding them as regression tests.

gcc/testsuite/ChangeLog:
PR analyzer/95152
* gcc.dg/analyzer/pr95152-4.c: New test.
* gcc.dg/analyzer/pr95152-5.c: New test.

Daily bump.

d: Merge upstream dmd 1b5a53d01.

Fixes an ICE in setValue at dmd/dinterpret.c:7046

This was originally seen when running the testsuite for a 16-bit target,
however, it could be reproduced on 32-bit using long[] as well.

Reviewed-on: https://github.com/dlang/dmd/pull/11547

gcc/d/ChangeLog:

* dmd/MERGE: Merge upstream dmd 1b5a53d01.

analyzer: fix infinite recursion ICE on unions [PR96723]

Attempts to store sm-state into a union in C++ triggered an infinite
recursion when trying to generate a representative tree, due to
erroneously trying to use the dtor of the union as a field.

Fix it by filtering out non-FIELD_DECLs when walking TYPE_FIELDs
in region::get_subregions_for_binding.

gcc/analyzer/ChangeLog:
PR analyzer/96723
* region-model-manager.cc
(region_model_manager::get_field_region): Assert that field is a
FIELD_DECL.
* region.cc (region::get_subregions_for_binding): In
union-handling, filter the TYPE_FIELDS traversal to just FIELD_DECLs.

gcc/testsuite/ChangeLog:
PR analyzer/96723
* g++.dg/analyzer/pr96723.C: New test.

libstdc++: Fix typo in ChangeLog

configure: Also check C++11 (flags) for ${build} compiler not only for ${host}

config/ChangeLog:

PR bootstrap/96612
* ax_cxx_compile_stdcxx.m4: Add fourth argument to check also
the CXX_FOR_BUILD compiler.

ChangeLog:

PR bootstrap/96612
* configure.ac: Run AX_CXX_COMPILE_STDCXX also for ${build} compiler,
if not the same as ${host}.
* configure: Regenerate.

libstdc++: Make incrementable<__int128> satisfied in strict mode

This adds specializations of std::incrementable_traits so that 128-bit
integers are always considered incrementable (and therefore usable with
std::ranges::iota_view) even when they don't satisfy std::integral.

libstdc++-v3/ChangeLog:

* include/bits/iterator_concepts.h [__STRICT_ANSI__]
(incrementable_traits<__int128>): Define specialization.
(incrementable_traits<unsigned __int128>): Likewise.
* testsuite/std/ranges/iota/96042.cc: Test iota_view with
__int128.

This patch fixes PRs 96100 and 96101.

2020-08-20  Paul Thomas  <pault@gcc.gnu.org>

gcc/fortran
PR fortran/96100
PR fortran/96101
* trans-array.c (get_array_charlen): Tidy up the evaluation of
the string length for array constructors. Avoid trailing array
references. Ensure string lengths of deferred length components
are set. For parentheses operator apply string  length to both
the primary expression and the enclosed expression.

gcc/testsuite/
PR fortran/96100
PR fortran/96101
* gfortran.dg/char_length_23.f90: New test.

vxworks: Fix GCC selftests for *-wrs-vxworks7-* targets

Currently when building a cross-compiler targeting arm-wrs-vxworks7, the
self-tests fail unless the VSB_DIR environment variable is set.

This prevents attempts at designating the location of runtime header
files, libraries or startfiles, which would fail on unset environment
variables and aren't needed for such tests.

gcc/ChangeLog:

* config/vxworks.h (VXWORKS_ADDITIONAL_CPP_SPEC): Don't include
VxWorks header files if -fself-test is used.
(STARTFILE_PREFIX_SPEC): Avoid using VSB_DIR if -fself-test is used.

Fix obvious typo were errmsg_len was assigned to errmsg.

gcc/fortran/ChangeLog:

2020-08-20  Andre Vehreschild  <vehre@gcc.gnu.org>

PR fortran/94958
* trans-array.c (gfc_bcast_alloc_comp): Use the correct variable.

arm: Require MVE memory operand for destination of vst1q intrinsic

Previously, the machine description patterns for vst1q accepted a generic memory
operand for the destination, which could lead to an unrecognised builtin when
expanding vst1q* intrinsics. This change fixes the pattern to only accept MVE
memory operands.

gcc/ChangeLog:

PR target/96683
* config/arm/mve.md (mve_vst1q_f<mode>): Require MVE memory operand for
destination.
(mve_vst1q_<supf><mode>): Likewise.

gcc/testsuite/ChangeLog:

PR target/96683
* gcc.target/arm/mve/intrinsics/vst1q_f16.c: New test.
* gcc.target/arm/mve/intrinsics/vst1q_s16.c: New test.
* gcc.target/arm/mve/intrinsics/vst1q_s8.c: New test.
* gcc.target/arm/mve/intrinsics/vst1q_u16.c: New test.
* gcc.target/arm/mve/intrinsics/vst1q_u8.c: New test.

libgomp: adjust nvptx_free callback context checking

Change test for CUDA callback context in nvptx_free() from using
GOMP_PLUGIN_acc_thread () into checking for CUDA_ERROR_NOT_PERMITTED,
for the former only works for OpenACC, but not OpenMP offloading.

2020-08-20  Chung-Lin Tang  <cltang@codesourcery.com>

libgomp/
* plugin/plugin-nvptx.c (nvptx_free):
Change "GOMP_PLUGIN_acc_thread () == NULL" test into check of
CUDA_ERROR_NOT_PERMITTED status for cuMemGetAddressRange. Adjust
comments.

Fortran: Fix OpenMP's 'if(simd:' etc. conditions

gcc/fortran/ChangeLog:

* openmp.c (gfc_match_omp_clauses): Re-order 'if' clause pasing
to avoid creating spurious symbols.

libgomp/ChangeLog:

* testsuite/libgomp.fortran/lastprivate-conditional-10.f90: New test.

testsuite: Remove test for arm32 in arm_soft_ok

There is no reason to check for arm32 when checking for
-mfloat=abi-soft support. Instead this implies skipping some tests
when targetting a thumb-1 cpu, while they pass.

This patch removes the arm32 check, and uses the same skeleton as
arm_softfp_ok and arm_hard_ok.

2020-08-20  Christophe Lyon  <christophe.lyon@linaro.org>

gcc/testsuite/
* lib/target-supports.exp (arm_soft_ok): Remove arm32 check.

testsuite: Skip arm/pure-code tests for arm*-*-uclinuxfdpiceabi

FDPIC it uses PIC code, which is incompatible with -mpure-code, so we
want to skip these tests for arm*-*-uclinuxfdpiceabi.

This patch also fixes a typo where the final closing bracket was
commented out.

2020-08-20  Christophe Lyon  <christophe.lyon@linaro.org>

gcc/testsuite/
* gcc.target/arm/pure-code/pure-code.exp: Skip for
arm*-*-uclinuxfdpiceabi. Fix missing closing bracket.

Fortran  : rejected f0.d edit descriptor PR96436

Zero length f format descriptors are valid for Fortran 95 and
later.  For g format descriptors from Fortran 2008 and later.
Finally for D, E, EN and ES for Fortran 2018 and later.

2020-08-20  Mark Eggleston  <markeggleston@gcc.gnu.org>

libgfortran/

PR fortran/96436
* io/format.c (parse_format_list):  Add new local variable
"standard" to hold the required standard to check. If the
format width is zero select standard depending on descriptor.
Call notification_std using the new standard variable.

2020-08-20  Mark Eggleston  <markeggleston@gcc.gnu.org>

gcc/testsuite/

PR fortran/96436
* gfortran.dg/pr96436_1.f90: New test.
* gfortran.dg/pr96436_2.f90: New test.
* gfortran.dg/pr96436_3.f90: New test.
* gfortran.dg/pr96436_4.f90: New test.
* gfortran.dg/pr96436_5.f90: New test.
* gfortran.dg/pr96436_6.f90: New test.
* gfortran.dg/pr96436_7.f90: New test.
* gfortran.dg/pr96436_8.f90: New test.
* gfortran.dg/pr96436_9.f90
* gfortran.dg/pr96436_10.f90

analyzer: fix ICE on vector comparisons [PR96713]

gcc/analyzer/ChangeLog:
PR analyzer/96713
* region-model.cc (region_model::get_gassign_result): For
comparisons, only use eval_condition when the lhs has boolean
type, and use get_or_create_constant_svalue on the boolean
constants directly rather than via get_rvalue.

gcc/testsuite/ChangeLog:
PR analyzer/96713
* gcc.dg/analyzer/pr96713.c: New test.