*** empty log message ***

daily update

2010-03-24  Michael Snyder  <msnyder@localhost.localdomain>

* elfread.c (find_separate_debug_file_by_buildid):
Remove unused local variable.

* gdb.base/completion.exp: Allow long instead of long int.
* gdb.base/ending-run.exp: Match _rt_entry.* for RealView.
* gdb.base/gdbvars.c (main): Remove unused usestubs code.  Reference
variable p.
* gdb.base/maint.exp: Allow ER_RO and ER_RW instead of .text and .data.
* gdb.base/pointers.exp: Allow long instead of long int.
* gdb.base/printcmds.exp: XFAIL for RealView on ARM EABI.
* gdb.base/step-line.exp: Allow a directory before the source file name.

gdb
PR breakpoints/9352:
* NEWS: Mention changes to `commands' and `rbreak'.
* symtab.c (do_end_rbreak_breakpoints): New function.
(rbreak_command): Call start_rbreak_breakpoints; arrange to call
end_rbreak_breakpoints.
* breakpoint.c (breakpoint_count, tracepoint_count): Now static.
(set_breakpoint_count): Likewise.  Clear last_was_multi.
(multi_start, multi_end, last_was_multi): New globals.
(start_rbreak_breakpoints, end_rbreak_breakpoints): New
functions.
(struct commands_info): New
(do_map_commands_command): New function.
(commands_command_1): New function.
(commands_command): Use it.
(commands_from_control_command): Likewise.
(do_delete_breakpoint): New function.
(delete_command): Use it.
(map_breakpoint_numbers): Add 'data' argument.  Pass to callback.
(do_map_disable_breakpoint): New function.
(disable_command): Use it.
(do_map_enable_breakpoint): New function.
(enable_command): Use it.
(enable_once_breakpoint): Add argument.
(enable_once_command): Update.
(enable_delete_breakpoint): Add argument.
(enable_delete_command): Update.
(break_command_really): Set last_was_multi when needed.
(check_tracepoint_command): Fix formatting.
(validate_commands_for_breakpoint): New function.
(breakpoint_set_commands): Use it.
(tracepoint_save_command): Update.
* breakpoint.h (start_rbreak_breakpoints, end_rbreak_breakpoints):
Declare.
gdb/doc
PR breakpoints/9352:
* gdb.texinfo (Break Commands): Update.
gdb/testsuite
PR breakpoints/9352:
* gdb.base/default.exp: Update.
* gdb.base/commands.exp: Update.
* gdb.cp/extern-c.exp: Test setting commands on multiple
breakpoints at once.

* gdb.base/call-signal-resume.exp, gdb.base/unwindonsignal.exp: Skip
if gdb,nosignals.
* gdb.base/watchpoints.c: Do not include unnecessary headers.
* lib/gdb.exp (gdb_test_multiple): Relax pattern for "the program
exited".

* linux-low.c (status_pending_p_callback): Fix comment.
(linux_wait_for_event_1): Move most of the internal breakpoint
handling from here...
(linux_wait_1): ... to here.
(count_events_callback): New.
(select_singlestep_lwp_callback): New.
(select_event_lwp_callback): New.
(cancel_breakpoints_callback): New.
(select_event_lwp): New.
(linux_wait_1): Simplify internal breakpoint handling.  Give equal
priority to all LWPs that have had events that should be reported
to the client.  Cancel breakpoints when about to reporting the
event to the client, not while stopping lwps.  No longer cancel
finished single-steps here.
(cancel_finished_single_step): Delete.
(cancel_finished_single_steps): Delete.

* breakpoint.h (struct counted_command_line): New struct.
(struct breakpoint) <commands>: Change type.
(struct bpstats) <commands>: Change type.
<commands_left>: New field.
* breakpoint.c (alloc_counted_command_line): New function.
(incref_counted_command_line): Likewise.
(decref_counted_command_line): Likewise.
(do_cleanup_counted_command_line): Likewise.
(make_cleanup_decref_counted_command_line): Likewise.
(breakpoint_set_commands): Use decref_counted_command_line and
alloc_counted_command_line.
(commands_command): Don't error if breakpoint commands are
executing.
(commands_from_control_command): Likewise.
(bpstat_free): Update.
(bpstat_copy): Likewise.
(bpstat_clear_actions): Likewise.
(bpstat_do_actions_1): Likewise.
(bpstat_stop_status): Likewise.
(print_one_breakpoint_location): Likewise.
(delete_breakpoint): Likewise.
(bpstat_alloc): Initialize new field.
(tracepoint_save_command): Update.
* tracepoint.c (encode_actions): Update.
(trace_dump_command): Update.

* mem-break.c (enum bkpt_type): New.
(struct breakpoint): New field `type'.
(set_breakpoint_at): Change return type to struct breakpoint
pointer.  Set type to `other_breakpoint' by default.
(delete_breakpoint): Rewrite, supporting more than one breakpoint
in the breakpoint list.
(delete_reinsert_breakpoints): Only delete reinsert breakpoints.
(reinsert_breakpoint): Rename to ...
(reinsert_raw_breakpoint): ... this.
(reinsert_breakpoints_at): Adjust.
* mem-break.h (struct breakpoint): Declare.
(set_breakpoint_at): Change return type to struct breakpoint
pointer.

2010-03-24  Stan Shebs  <stan@codesourcery.com>

* gdb.trace/tfile.exp: Expect "trace frame", with a space.

* dwarf2-frame.c (dwarf2_frame_find_quirks): Use producer_is_realview.
* dwarf2read.c (load_full_comp_unit): Read DW_AT_producer.
(read_structure_type): For RealView, set TYPE_STUB on structures with
no byte size and no children.
(read_subroutine_type): Mark functions as prototyped by default.
* symtab.c (producer_is_realview): New function.
* symtab.h (expand_line_sal): Fix declaration formatting.
(producer_is_realview): Declare.

testsuite/
* gdb.base/callfuncs.exp (do_function_calls): Add XFAILs for RealView.
* gdb.base/ptype.exp (ptype_maybe_prototyped): Add overprototyped
argument.  Handle "short" and "long".
(Top level): Pass overprototyped output for old_fptr and xptr.

* arm-tdep.c (skip_prologue_function): New function.
(submask, bit, bits, sbits, BranchDest): Move higher in the file.
(thumb_analyze_prologue): Document return value.  Recognize more
Thumb instructions, skippable calls, and some Thumb-2 instructions.
Add debug output.
(arm_skip_prologue): Remove call dummy check.  Check the prologue
for non-GNU compilers.
(arm_instruction_changes_pc): New function.
(arm_analyze_prologue): New function, broken out from
arm_scan_prologue.  Recognize more ARM instructions and skippable
calls.  Update comments.  Handle NULL cache.  Return the address
of the first unrecognized instruction.  Do not skip past other
instructions which change control flow.  Add debug output.
(arm_scan_prologue): Use arm_analyze_prologue.
(ARM_PC_32): Delete.
(shifted_reg_val): Simplify ARM_PC_32 check.

* tracepoint.c (tvariables_info_1): Actually compute
the number of rows in the result.

* testsuite/script_test_3.t: Add a TLS segment.
* testsuite/Makefile.am (check_PROGRAMS): Add
tls_phdrs_script_test.
(tls_phdrs_script_test_SOURCES): Define.
(tls_phdrs_script_test_DEPENDENCIES): Define.
(tls_phdrs_script_test_LDFLAGS): Define.
(tls_phdrs_script_test_LDADD): Define.
* testsuite/Makefile.in: Rebuild.

Update copyright year.

2010-03-24  H.J. Lu  <hongjiu.lu@intel.com>

* aout-target.h: Update copyright year.
* aout-tic30.c: Likewise.
* coff-alpha.c: Likewise.
* coff-rs6000.c: Likewise.
* coff64-rs6000.c: Likewise.
* elf64-mips.c: Likewise.
* ieee.c: Likewise.
* libecoff.h: Likewise.
* mach-o-target.c: Likewise.
* mach-o.c: Likewise.
* oasys.c: Likewise.
* targets.c: Likewise.

Update copyright year on libbfd-in.h.

2010-03-24  H.J. Lu  <hongjiu.lu@intel.com>

* libbfd-in.h: Update copyright year.

Blackfin disassmbler: fix typo where M2.H was decoded as L2.H

* fileread.cc (find_or_make_view): Fix comment.

gdb/
* remote.c (crc32): Constify `buf' parameter.
(remote_verify_memory): New, abstracted out from...
(compare_sections_command): ... this.  Remove hardcoded target
checks.
(init_remote_ops): Install remote_verify_memory.
* target.c (target_verify_memory): New.
* target.h (struct target_ops) <to_verify_memory>: New field.
(target_verify_memory): Declare.

* server.c (handle_query): Assign, not compare.

Teach linux gdbserver to step-over-breakpoints.

* linux-low.c (can_hardware_single_step): New.
(supports_breakpoints): New.
(handle_extended_wait): If stopping threads, read the stop pc of
the new cloned LWP.
(get_pc): New.
(get_stop_pc): Add `lwp' parameter.  Handle it.  Bail out if the
low target doesn't support retrieving the PC.
(add_lwp): Set last_resume_kind to resume_continue.
(linux_attach_lwp_1): Adjust comments.  Always set stop_expected.
(linux_attach): Don't clear stop_expected.  Set the lwp's
last_resume_kind to resume_stop.
(linux_detach_one_lwp): Don't check for removed breakpoints.
(check_removed_breakpoint): Delete.
(status_pending_p): Rename to ...
(status_pending_p_callback): ... this.  Don't check for removed
breakpoints.  Don't consider threads that are stopped from GDB's
perspective.
(linux_wait_for_lwp): Always read the stop_pc here.
(cancel_breakpoint): New.
(step_over_bkpt): New global.
(linux_wait_for_event_1): Implement stepping over breakpoints.
(gdb_wants_lwp_stopped): New.
(gdb_wants_all_stopped): New.
(linux_wait_1): Tag threads as gdb-wants-stopped.  Cancel finished
single-step traps here.  Store the thread's last reported target
wait status.
(send_sigstop): Don't clear stop_expected.  Always set it,
instead.
(mark_lwp_dead): Remove reference to pending_is_breakpoint.
(cancel_finished_single_step): New.
(cancel_finished_single_steps): New.
(wait_for_sigstop): Don't cancel finished single-step traps here.
(linux_resume_one_lwp): Don't check for removed breakpoints.
Don't set `step' on non-hardware step archs.
(linux_set_resume_request): Ignore resume_stop requests if already
stopping or stopped.  Set the lwp's last_resume_kind.
(resume_status_pending_p): Don't check for removed breakpoints.
(need_step_over_p): New.
(start_step_over): New.
(finish_step_over): New.
(linux_resume_one_thread): Always queue a sigstop for resume_stop
requests.  Clear the thread's last reported target waitstatus.
Don't use the `suspended' flag.  Don't consider pending breakpoints.
(linux_resume): Start a step-over if necessary.
(proceed_one_lwp): New.
(proceed_all_lwps): New.
(unstop_all_lwps): New.
* linux-low.h (struct lwp_info): Rewrite comment for the
`suspended' flag.  Add the `stop_pc' field.  Delete the
`pending_stop_pc' field.  Tweak the `stepping' flag's comment.
Add `'last_resume_kind' and `need_step_over' fields.
* inferiors.c (struct thread_info): Delete, moved elsewhere.
* mem-break.c (struct breakpoint): Delete `reinserting' flag.
Delete `breakpoint_to_reinsert' field.  New flag `inserted'.
(set_raw_breakpoint_at): New.
(set_breakpoint_at): Rewrite to use it.
(reinsert_breakpoint_handler): Delete.
(set_reinsert_breakpoint): New.
(reinsert_breakpoint_by_bp): Delete.
(delete_reinsert_breakpoints): New.
(uninsert_breakpoint): Rewrite.
(uninsert_breakpoints_at): New.
(reinsert_breakpoint): Rewrite.
(reinsert_breakpoints_at): New.
(check_breakpoints): Rewrite.
(breakpoint_here): New.
(breakpoint_inserted_here): New.
(check_mem_read): Adjust.
* mem-break.h (breakpoints_supported, breakpoint_here)
(breakpoint_inserted_here, set_reinsert_breakpoint): Declare.
(reinsert_breakpoint_by_bp): Delete declaration.
(delete_reinsert_breakpoints): Declare.
(reinsert_breakpoint): Delete declaration.
(reinsert_breakpoints_at): Declare.
(uninsert_breakpoint): Delete declaration.
(uninsert_breakpoints_at): Declare.
(check_breakpoints): Adjust prototype.
* server.h: Adjust include order.
(struct thread_info): Declare here.  Add a `last_status' field.

*** empty log message ***

* gdb.threads/pthreads.c (thread1, thread2, main): Fix printf
format strings and add casts to avoid compiler warnings.

daily update

2010-03-23  Michael Snyder  <msnyder@vmware.com>

* server.c (crc32): New function.
(handle_query): Add handling for 'qCRC:' request.

* gdb.texinfo (GDB/MI Tracepoint Commands): Document MI tracepoint
commands.

Implement -trace-save.

* mi-cmds.h (mi_cmds_trace_save): Declare.
* mi-cmds.c (mi_cmds): Register -trace-save.
* mi/mi-main.c (mi_cmd_trace_save): New.
* remote.c (remote_save_trace_data): Take const parameter.
* target.h (struct target_ops::to_save_trace_data): Take
const parameter.
* target.c (update_current_target): Adjust to the above.
* tracepoint.c (trave_save): New, extracted from
(trace_save_command): ...this.
(tfile_trace_find): Remove message that is unnecessary now
that 'tfind' reports found frame.
* tracepoint.h (trace_save): Declare.

Implement -trace-find.

* mi/mi-cmds.c (mi_cmds): Register -trace-find.
* mi/mi-cmds.h (mi_cmd_trace_find): Declare.
* mi/mi-main.c (mi_cmd_trace_find): New.
* target.h (struct target_ops): Document to_trace_find.
* tracepoint.h (tfind_1): Declare.
* tracepoint.c (finish_tfind_command): Rename to...
(tfind_1): ...this.
* remote.c (remote_trace_find): Return -1 if target say
there's no frame.  Improve error diagnostics.

    -trace-define-variable and -trace-list-variables.

     * tracepoint.c (create_trace_state_variable): Make
     private copy of name, as opposed to assuming the
     pointer lives forever.
     (tvariables_info_1): New.
     (tvariables_info): Use the above.
     * tracepoint.h (create_trace_state_variable, tvariables_info_1):
     Declare.
     * mi/mi-cmds.c (mi_cmds): Register -trace-define-variable
     and -trace-list-variables.
     * mi/mi-cmds.h (mi_cmd_trace_define_variable)
     (mi_cmd_trace_list_variables): New.
     * mi/mi-main.c (mi_cmd_trace_define_variable)
     (mi_cmd_trace_list_variables): New.

Implement -break-passcount.

* mi/mi-cmd-break.c (mi_cmd_break_passcount): New.
* mi/mi-cmds.c (mi_cmds): Register -break-passcount.
* mi/mi-cmds.h (mi_cmd_break_passcount): Declare.

-trace-start/-trace-end/-trace-status.

* mi/mi-cmds.c (mi_cmds): Register -trace-start, -trace-status
and -trace-stop.
* mi/mi-cmds.h (mi_cmd_trace_start, mi_cmd_trace_status)
(mi_cmd_trace_stop): Declare.
* mi/mi-main.c (mi_cmd_trace_start, mi_cmd_trace_status)
(mi_cmd_trace_stop): New.
* tracepoint.c (start_tracing): New, extracted from...
(trace_start_command): ...this.
(trace_status_mi): New.
* tracepoint.h (struct trace_status): Document
stopping_tracepoint.
(start_tracing, stop_tracing, trace_status_mi): Declare.

Implement creating tracepoints with -break-insert.

* mi/mi-cmd-break.c (mi_cmd_break_insert): Handle -a
to mean that tracepoint should be created.

* breakpoint.c (check_no_tracepoint_commands): Use
current spelling of 'teval'.

Remove conflict marker.

Unify actions and commands

* defs.h (read_command_lines, read_command_lines_1): New
parameters validator and closure.
* tracepoint.h (struct action_line): Remove.
* breakpoint.h (struct breakpoint): Remove the 'actions'
field.
* defs.h (enum command_control_type): New value
while_stepping_control.
(struct command_line): Add comments.
* breakpoint.c (breakoint_is_tracepoint): New.
(breakpoint_set_commands): For tracepoints,
verify the commands are permissible.
(check_tracepoint_commands): New.
(commands_command): Require that each new line is validated using
check_tracepoint_command, if we set commands for a tracepoint.
(create_tracepoint_from_upload): Likewise.
(print_one_breakpoint_location): Remove the code to print
actions specifically.
(tracepoint_save_command): Relay to print_command_lines.
* cli/cli-script.c (process_next_line): New parameters validator
and closure. Handle 'while-stepping'. Call validator if not null.
(read_command_lines, read_command_lines1): Likewise.
(recurse_read_control_structure): New parameters validator and
closure. Handle while_stepping_control.
(print_command_lines): Handle while-stepping.
(get_command_line, define_command, document_command): Adjust.
* remote.c (remote_download_tracepoint): Adjust.
* tracepoint.c (make_cleanup_free_actions, read_actions)
(free_actions, do_free_actions_cleanup): Remove.
(trace_actions_command): Use read_command_lines.
(validate_actionline): Use error in one place.
(encode_actions_1): New, extracted from...
(encode_actions): ...this. Also use cleanups for exception
safety.
(trace_dump_command): Adjust.
* mi/mi-cmd-break (mi_cmd_break_commands): Validate commands if
it's tracepoint.

gdb: fix building with system readline

Building gdb with --enable-targets=all and --with-system-readline hits a
failure in a few targets all related to the inclusion of some opcodes
headers.  The usage of the bundled readline results in an -I to the top
srcdir, but if that isn't used, then there is no such -I path.  A few gdb
targets use this implicitly to include opcodes/ source header files.  So
make sure there is always an explicit -I path to the opcodes/ directory.

* script-sections.cc (class Orphan_section_placement): Define
PLACE_TLS and PLACE_TLS_BSS.
(Orphan_section_placement::Orphan_section_placement): Initialize
new places.
(Orphan_section_placement::find_place): Handle SHF_TLS sections.
* testsuite/Makefile.am (check_PROGRAMS): Add tls_script_test.
(tls_script_test_SOURCES): Define.
(tls_script_test_DEPENDENCIES): Define.
(tls_script_test_LDFLAGS): Define.
(tls_script_test_LDADD): Define.
* testsuite/Makefile.in: Rebuild.

* linux-x86-low.c (x86_linux_prepare_to_resume): Clear DR6 if the
lwp had been stopped by a watchpoint.

* configure.ac (tic6x-*-*): New case.
* configure: Regenerate.

* scripttempl/elf.sc (RODATA_NAME, SDATA_NAME, SBSS_NAME,
BSS_NAME): Define if not already defined.  Use in place of some
hardcoded section names.

* gas/macros/dot.s: Remove space in .byte operands.

* dis-buf.c (buffer_read_memory): Give error for reading just
before the start of memory.

* symcat.h (CONCAT5, CONCAT6, XCONCAT5, XCONCAT6): Define.

Merge from gcc:
2010-03-19  Jack Howarth <howarth@bromo.med.uc.edu>
PR ada/42554
* configure.ac: Only pass -c to ranlib for darwin9 and earlier.
* configure: Regenerate.

* config.sub: Update to version 2010-03-22.
* config.guess: Update to version 2009-12-30.

2010-03-22  Sebastian Pop  <sebastian.pop@amd.com>
    Quentin Neill <quentin.neill@amd.com>

opcodes/
* i386-dis.c (OP_LWP_I): Removed.
(reg_table): Do not use OP_LWP_I, use Iq.
(OP_LWPCB_E): Remove use of names16.
(OP_LWP_E): Same.
* i386-opc.tbl: Removed 16bit LWP insns.  32bit LWP insns
should not set the Vex.length bit.
* i386-tbl.h: Regenerated.

gas/
* testsuite/gas/i386/x86-64-lwp.s: Remove use of 16bit LWP insns.
* testsuite/gas/i386/lwp.s: Same.
* testsuite/gas/i386/x86-64-lwp.d: Updated.
* testsuite/gas/i386/lwp.d: Updated.

*** empty log message ***

sim: always enable support for the --endian option

The gdb code always passes down -E <little|big> to the sim core when using
the sim target.  But the sim core only recognizes this option when the sim
supports big endian systems.  So for little endian simulators, any attempt
to use the sim target fails with:

(gdb) target sim
gdbsim: invalid option -- 'E'
unable to create simulator instance

Since always respecting the option doesn't cause any problems, do just
that.  If someone tries to use an invalid endian, they'll get an error
anyways.

daily update

2010-03-22  Doug Kwan  <dougkwan@google.com>

* arm.cc (Arm_relocate_functions::abs8,
Arm_relocate_functions::abs16): Use correct check for overflow
specified in the ARM ELF specs.
(Arm_relocate_functions): thumb_branch_common.  Handle bit 1 of branch
target of a BLX instruction specially.
(Reloc_stub::stub_type_for_reloc): Ditto.
(Relocate::relocate): Use symbolic names instead of numeric relocation
codes to report error.
(Target_arm::do_relox): Reduce default stub-group size for Cortex-A8
workaround.
* testsuite/Makefile.am (check_DATA): add thumb_blx_in_range.stdout,
thumb_blx_out_of_range.stdout, thumb2_blx_in_range.stdout and
thumb2_blx_out_of_range.stdout
(thumb_bl_out_of_range, thumb_bl_out_of_range.o,
thumb2_bl_out_of_range, thumb2_bl_out_of_range.o): Fix dependenices.
(thumb_blx_in_range.stdout, thumb_blx_in_range, thumb_blx_in_range.o,
thumb_blx_out_of_range.stdout, thumb_blx_out_of_range,
thumb_blx_out_of_range.o, thumb2_blx_in_range.stdout,
thumb2_blx_in_range, thumb2_blx_in_range.o,
thumb2_blx_out_of_range.stdout, thumb2_blx_out_of_range,
thumb2_blx_out_of_range.o): New rules.
  (MOSTLYCLEANFILES): Add thumb_blx_in_range, thumb_blx_out_of_range,
thumb2_blx_in_range and thumb2_blx_out_of_range.
* testsuite/Makefile.in: Regenerate.
* arm_branch_in_range.sh: Add tests for THUMB BLX.
* testsuite/thumb_blx_in_range.s: New file.
* testsuite/thumb_blx_out_of_range.s: New file.

merge from gcc

gdb/testsuite/
* dg-extract-results.sh: Sync with GCC HEAD (import r155655, r157175
and r157645).

2010-03-22  Stan Shebs  <stan@codesourcery.com>

* value.c (value_static_field): Be lazy about the field's value.

2010-03-22  Reid Kleckner  <reid@kleckner.net>

PR gdb/11094
* breakpoint.c (disable_breakpoints_in_unloaded_shlib): Add
bp_jit_event.
(disable_breakpoints_in_shlibs): Likewise.

gdb/testsuite/
* gdb.dwarf2/dw2-empty-namespace.exp, gdb.dwarf2/dw2-empty-namespace.S:
New.

* gdb.python/Makefile.in (EXECUTABLES): Add py-mi.
* gdb.python/py-mi.exp (binfile): Rename to py-mi.

2010-03-22  Rafael Espindola  <espindola@google.com>

* archive.cc (Should_include): Move to archive.h.
(should_include_member): Make it a member of Archive.
(Lib_group): New.
(Add_lib_group_symbols): New.
* archive.h: Include options.h.
(Archive_member): Moved from Archive.
(Should_include): Moved from archive.cc.
(Lib_group): New.
(Add_lib_group_symbols): New.
* dynobj.cc (do_should_include_member): New.
* dynobj.h (do_should_include_member): New.
* gold.cc (queue_initial_tasks): Update call to queue.
* main.cc (main): Print lib group stats.
* object.cc (do_should_include_member): New.
* object.h: Include archive.h.
(Object::should_include_member): New.
(Object::do_should_include_member): New.
(Sized_relobj::do_should_include_member): New.
* options.cc (General_options::parse_start_lib): New.
(General_options::parse_end_lib): New.
(Input_arguments::add_file): Handle lib groups.
(Input_arguments::start_group): Check we are not in a lib.
(Input_arguments::start_lib): New.
(Input_arguments::end_lib): New.
* options.h (General_options): Add start_lib and end_lib.
(Input_argument::lib_): New.
(Input_argument::lib): New.
(Input_argument::is_lib): New.
(Input_file_lib): New.
(Input_arguments::in_lib_): New.
(Input_arguments::in_lib): New.
(Input_arguments::start_lib): New.
(Input_arguments::end_lib_): New.
* plugin.cc (Pluginobj::get_symbol_resolution_info): Mark symbols
in unused members as preempted.
(Sized_pluginobj::do_should_include_member): New.
* plugin.h (Sized_pluginobj::do_should_include_member): New.
* readsyms.cc (Read_symbols::locks): If we are just reading a member,
return the blocker.
(Read_symbols::do_whole_lib_group): New.
(Read_symbols::do_lib_group): New.
(Read_symbols::do_read_symbols): Handle lib groups.
(Read_symbols::get_name): Handle lib groups.
* readsyms.h (Read_symbols): Add an archive member pointer.
(Read_symbols::do_whole_lib_group): New.
(Read_symbols::do_lib_group): New.
(Read_symbols::member_): New.
* script.cc (read_input_script): Update call to queue_soon.

Use STRING_COMMA_LEN to avoid strlen.

2010-03-22  H.J. Lu  <hongjiu.lu@intel.com>

* config/tc-i386.c (lex_got): Use STRING_COMMA_LEN on gotrel.

* dwarf2read.c (partial_die_parent_scope): Work around buggy
GCC 4.1 debug info generation (GCC PR c++/28460).
(determine_prefix): Likewise.

Replace oprand_size_mismatch with operand_size_mismatch.

2010-03-21  H.J. Lu  <hongjiu.lu@intel.com>

* config/tc-i386.c (i386_error): Replace oprand_size_mismatch
with operand_size_mismatch.
(operand_size_match): Updated.
(match_template): Likewise.

Set error instead of err_msg on failure.

2010-03-21  H.J. Lu  <hongjiu.lu@intel.com>

* config/tc-i386.c (i386_error): New.
(_i386_insn): Replace err_msg with error.
(operand_size_match): Set error instead of err_msg on failure.
(operand_type_match): Likewise.
(operand_type_register_match): Likewise.
(VEX_check_operands): Likewise.
(match_template): Likewise.  Use error instead of err_msg with
as_bad.

*** empty log message ***

Check !executable instead of shared for PIE.

2010-03-21  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/11413
* elflink.c (_bfd_elf_add_default_symbol): Check !executable
instead of shared.

daily update

*** empty log message ***

daily update

* tui/tui-disasm.c (tui_get_begin_asm_address): Default to
get_current_arch.
* tui/tui-layout.c (extract_display_start_addr): Likewise.

*** empty log message ***

daily update

2010-03-19  Stan Shebs  <stan@codesourcery.com>

* ax-gdb.c (gen_fetch): Handle bool.
(gen_usual_unary): Ditto.
(gen_cast): Ditto.
(gen_equal): New function.
(gen_less): New function.
(gen_expr_binop_rest): Call them, also return integer type from
logical operations.
(gen_expr): Ditto.

* gdb.trace/ax.exp: New file.

2010-03-19  Doug Kwan  <dougkwan@google.com>

* arm.cc (Stub_table::Stub_table): Initialize new data members
Stub_table::reloc_stubs_size_ and Stub_table::reloc_stubs_addralign_.
(Stub_table::add_reloc_stub): Assign stub offset and update
Stub_table::reloc_stubs_size_ and Stub_table::reloc_stubs_addralign_.
(Stub_table::reloc_stubs_size_, Stub_table::reloc_stubs_addralign_):
New data members.
  (Stub_table::update_data_size_and_addralign): Use
Stub_table::reloc_stubs_size_ and Stub_table::reloc_stubs_addralign_
instead of going over all reloc stubs.
  (Stub_table::finalize_stubs): Do not assign reloc stub offsets.
* stringpool.cc (Stringpool_template::Stringpool_template): Initialize
Stringpool_template::offset_ to size of Stringpool_char.
  (Stringpool_template::new_key_offset): Remove code to initialize
Stringpool_template::offset_.
* stringpool.h (Stringpool_template::set_no_zero_null): Set
Stringpool_template::offset_ to zero.

* jv-lang.c (jv_dynamics_objfile_data_key)
(jv_type_objfile_data_key): New globals.
(class_symtab): Move earlier.
(jv_per_objfile_free): New function.
(get_dynamics_objfile): Call set_objfile_data.  Add 'gdbarch'
parameter.
Remove ancient #if 1.
(add_class_symbol): Remove redundant declaration.
(java_lookup_class): Use alloc_type, not alloc_type_arch.
(java_link_class_type): Mark as static.  Update.
(jv_clear_object_type): New function.
(set_java_object_type): Likewise.
(get_java_object_type): Use set_java_object_type.
(is_object_type): Likewise.
(_initialize_java_language): Register new objfile keys.
(get_java_class_symtab): Add 'gdbarch' parameter.
(add_class_symtab_symbol): Update.
(type_from_class): Update.

2010-03-19  Stan Shebs  <stan@codesourcery.com>

* ax-general.c (ax_const_l): Fix a sizing bug.

* lib/gdb.exp (gdb_compile_test): Watch for "compiler not installed"
output from gcc.

* gdb.base/break-interp.exp (prelinkNO): Handle prelink binaries
named /usr/sbin/prelink<foo>.

* elf32-arm.c (struct section_list): Remove.
(section_list): Remove typedef.
(record_section_with_arm_elf_section_data): Remove.
(find_arm_elf_section_entry): Remove.
(get_arm_elf_section_data): Use is_arm_elf.
(unrecord_section_with_arm_elf_section_data): Remove.
(elf32_arm_new_section_hook): Don't call
record_section_with_arm_elf_section_data.
(elf32_arm_write_section): Set mapcount to -1 when
the map has been used. Don't call
unrecord_section_with_arm_elf_section_data.
(unrecord_section_via_map_over_sections): Remove.
(elf32_arm_close_and_cleanup): Remove.
(elf32_arm_bfd_free_cached_info): Remove.
(bfd_elf32_close_and_cleanup): Don't define.
(bfd_elf32_bfd_free_cached_info): Don't define.

PR ld/11304
* ld-elf/pr11304.d: New test.
* ld-elf/pr11304a.s: New test.
* ld-elf/pr11304b.s: New test.
* lib/ld-lib.exp (regexp_diff): Add support for #failif.

* config/tc-arm.c (make_mapping_symbol): Hanle the case
that two mapping symbols have the same value.

testsuite/
* gas/arm/mapmisc.s: Add the test case for two mapping
symbols having the same value.
* gas/arm/mapmisc.d: Likewise.

*** empty log message ***

daily update

GDB 7.1 released.

2010-03-18  Stan Shebs  <stan@codesourcery.com>
    Pedro Alves  <pedro@codesourcery.com>

* target.h (struct target_ops): New method
to_set_circular_trace_buffer.
(target_set_circular_trace_buffer): New macro.
* target.c (update_current_target): Add
to_set_circular_trace_buffer, fix to_set_disconnected_tracing
default behavior.
* remote.c (remote_set_circular_trace_buffer): New function.
(init_remote_ops): Add it to vector.
* tracepoint.h (struct trace_status): New field traceframes_created,
change buffer_size and buffer_free to int.
* tracepoint.c (circular_trace_buffer): New global.
(start_tracing): Send values of disconnected tracing and circular
trace buffer settings.
(set_circular_trace_buffer): New function.
(parse_trace_state): Handle total space and frames created.
(trace_status_command): Display total space and total frames
created.
(trace_save): Write out new status values.
(parse_trace_status): Set traceframe_count, traceframes_created,
buffer_free and buffer_size to -1 by default.
(_initialize_tracepoint): New setshow for circular-trace-buffer.
* NEWS: Mention the circular trace buffer option.

* gdb.texinfo (Starting and Stopping Trace Experiments): Describe
circular-trace-buffer.
(Tracepoint Packets): Describe QTBuffer, and details of the
qTStatus reply.

* gdb.trace/circ.exp: Test circular-trace-buffer.
* gdb.trace/tfile.exp: Update tstatus test.

Re-indent INIT_ARRAY.

2010-03-18  H.J. Lu  <hongjiu.lu@intel.com>

* scripttempl/elf.sc (INIT_ARRAY): Re-indent.

[dwarf] Anonymous nested function causes SEGV during psymbol read

According to the DWARF3 standard, a function always has a name attribute
(Section 3.3 - Subroutine and Entry Point Entries).  The only exception
is when a DW_AT_abstract_origin attribute is provided, in which case
the name may be inherited from the referenced DIE.

The problem occured because our compiler generated a subprogram DIE
for a nested function where the name attribute was missing (and no
abstract-origin either).  Our code in add_partial_symbol is not
prepared to deal with the situation, and happily just tries  to compute
the length of the (NULL) function name.

This normally cannot happen, because there is already a guard in
scan_partial_symbols, where we (silently!) ignore anonymous dies,
including anonymous subprograms. Unfortunately, there is a flaw that
affects Ada and other languages that allow nested subprograms. For
nested subprograms, we do not go through scan_partial_symbols and
thus we are missing the name check.

This patch adds the name check in the nested subprogram case. It also
adds a complaint which is emitted during the psymtab->symtab conversion
phase.

gdb/ChangeLog:

        * dwarf2read.c (add_partial_subprogram): Make sure the subprogram
        DIE has a name before creating the associated partial symbol.
        (read_func_scope): Emit a complaint if the subprogram does not
        have a name or when we can't extract the subprogram PC bounds.

gdb/testsuite/ChangeLog:

        * gdb.dwarf2/dw2-anonymous-func.S: New file.
        * gdb.dwarf2/dw2-anonymous-func.exp: New testcase.

Tested on x86_64-linux, no regression.  Note that the testcase also
verifies that the psymtab->symtab conversion does not crash (this is
the purpose of the "list file1.txt:1" test.

Reformat.

* infcmd.c (finish_command_continuation): Wrap print_return_value
in TRY_CATCH.

Avoid buffer overflow.

2010-03-18  H.J. Lu  <hongjiu.lu@intel.com>

* readelf.c (decode_arm_unwind): Increase buf size to 9 byte.

Fix last checkin

* doc/c-arm.texi (.setfp): Correct example.

Move ChangeLog entries to proper place.

ChangeLog:

* mi/mi-main.c (mi_cmd_list_thread_groups): Use get_current_arch
instead of selected frame architecture.

testsuite/ChangeLog:

* gdb.mi/gdb680.exp: Revert 2009-06-17 change.

gdb/
* infcmd.c (until_command): Use ERROR_NO_INFERIOR.  Ensure there's
a valid selected thread, and that it is not running.
(advance_command): Ditto.
(finish_command): Ditto.

gdb/testsuite/
* gdb.base/default.exp: Adjust.

    PR ld/11384
        * emultempl/sh64elf.em: Add missing EOF.

Don't add IMAGE_FILE_RELOCS_STRIPPED for PIE.

2010-03-18  H.J. Lu  <hongjiu.lu@intel.com>

PR binutils/11396
* libcoff-in.h (pe_tdata): Add dont_strip_reloc.
* libcoff.h: Regenerated.

* peXXigen.c (_bfd_XXi_only_swap_filehdr_out): Clear F_RELFLG
if dont_strip_reloc is set.
(_bfd_XX_bfd_copy_private_bfd_data_common): Set
dont_strip_reloc on output if there is no .reloc and
IMAGE_FILE_RELOCS_STRIPPED isn't set in input.

bfd/
2010-03-15  Wei Guozhi  <carrot@google.com>

       PR gas/11323
       * bfd-in2.h (enum bfd_reloc_code_real): New BFD_RELOC_GOT_PREL type.
       * elf32-arm.c (elf32_arm_reloc_map): BFD_RELOC_GOT_PREL to
       R_ARM_GOT_PREL map.
       * libbfd.h (bfd_reloc_code_real_names): BFD_RELOC_GOT_PREL name.
       * reloc.c (comments): Document the new relocation.

gas/
2010-03-15  Wei Guozhi  <carrot@google.com>

       PR gas/11323
       * config/tc-arm.c (reloc_names): New relocation names.
       (md_apply_fix): New case for BFD_RELOC_ARM_GOT_PREL.
       (tc_gen_reloc): New case for BFD_RELOC_ARM_GOT_PREL.
       * doc/c-arm.texi (ARM-Relocations): Document the new relocation.

gas/testsuite
2010-03-15  Wei Guozhi  <carrot@google.com>

       PR gas/11323
       * gas/arm/got_prel.s: New test case.
       * gas/arm/got_prel.d: Likewise.

    * pe-dll.c (make_one): Make text section readonly.
        (make_one): Add *ABS* symbol @feat.00 with value 1 to tag
        the jump stub on X86 as /SAFESEH compatible for
        native toolchains.

2010-03-17 Stan Shebs  <stan@codesourcery.com>

* ax-gdb.c (require_rvalue): Disallow non-scalars.

2010-03-17 Stan Shebs  <stan@codesourcery.com>

* infcall.c: Include tracepoint.h.
(call_function_by_hand): Disallow calls in tfind mode.
* infcmd.c: Include tracepoint.h.
(ensure_not_tfind_mode): New function.
(continue_1): Call it.
(step_1) Ditto.
(jump_command): Ditto.
(signal_command): Ditto.
(advance_command): Ditto.
(until_command): Ditto.
(finish_command): Ditto.
* tracepoint.h (disconnect_or_stop_tracing): Declare.

*** empty log message ***

Run list-1, list-2 and list-3 only for ELF tagets.

2010-03-17  H.J. Lu  <hongjiu.lu@intel.com>

* gas/i386/i386.exp: Run list-1, list-2 and list-3 only for
ELF tagets.