Richard Sandiford [Tue, 31 Jul 2018 14:23:34 +0000 (14:23 +0000)]
[21/46] Make grouped_stores and reduction_chains use stmt_vec_infos
This patch changes the SLP lists grouped_stores and reduction_chains
from auto_vec<gimple *> to auto_vec<stmt_vec_info>. It was easier
to do them together due to the way vect_analyze_slp is structured.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (vec_info::grouped_stores): Change from
an auto_vec<gimple *> to an auto_vec<stmt_vec_info>.
(_loop_vec_info::reduction_chains): Likewise.
* tree-vect-loop.c (vect_fixup_scalar_cycles_with_patterns): Update
accordingly.
* tree-vect-slp.c (vect_analyze_slp): Likewise.
From-SVN: r263136
Richard Sandiford [Tue, 31 Jul 2018 14:23:29 +0000 (14:23 +0000)]
[20/46] Make *FIRST_ELEMENT and *NEXT_ELEMENT stmt_vec_infos
This patch changes {REDUC,DR}_GROUP_{FIRST,NEXT} element from a
gimple stmt to stmt_vec_info.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (_stmt_vec_info::first_element): Change from
a gimple stmt to a stmt_vec_info.
(_stmt_vec_info::next_element): Likewise.
* tree-vect-data-refs.c (vect_update_misalignment_for_peel)
(vect_slp_analyze_and_verify_node_alignment)
(vect_analyze_group_access_1, vect_analyze_group_access)
(vect_small_gap_p, vect_prune_runtime_alias_test_list)
(vect_create_data_ref_ptr, vect_record_grouped_load_vectors)
(vect_supportable_dr_alignment): Update accordingly.
* tree-vect-loop.c (vect_fixup_reduc_chain): Likewise.
(vect_fixup_scalar_cycles_with_patterns, vect_is_slp_reduction)
(vect_is_simple_reduction, vectorizable_reduction): Likewise.
* tree-vect-patterns.c (vect_reassociating_reduction_p): Likewise.
* tree-vect-slp.c (vect_build_slp_tree_1)
(vect_attempt_slp_rearrange_stmts, vect_supported_load_permutation_p)
(vect_split_slp_store_group, vect_analyze_slp_instance)
(vect_analyze_slp, vect_transform_slp_perm_load): Likewise.
* tree-vect-stmts.c (vect_model_store_cost, vect_model_load_cost)
(get_group_load_store_type, get_load_store_type)
(get_group_alias_ptr_type, vectorizable_store, vectorizable_load)
(vect_transform_stmt, vect_remove_stores): Likewise.
From-SVN: r263135
Richard Sandiford [Tue, 31 Jul 2018 14:23:25 +0000 (14:23 +0000)]
[19/46] Make vect_dr_stmt return a stmt_vec_info
This patch makes vect_dr_stmt return a stmt_vec_info instead of a
gimple stmt. Rather than retain a separate gimple stmt variable
in cases where both existed, the patch replaces uses of the gimple
variable with the uses of the stmt_vec_info. Later patches do this
more generally.
Many things that are keyed off a data_reference would these days
be better keyed off a stmt_vec_info, but it's more convenient
to do that later in the series. The vect_dr_size calls that are
left over do still benefit from this patch.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (vect_dr_stmt): Return a stmt_vec_info rather
than a gimple stmt.
* tree-vect-data-refs.c (vect_analyze_data_ref_dependence)
(vect_slp_analyze_data_ref_dependence, vect_record_base_alignments)
(vect_calculate_target_alignmentm, vect_compute_data_ref_alignment)
(vect_update_misalignment_for_peel, vect_verify_datarefs_alignment)
(vector_alignment_reachable_p, vect_get_data_access_cost)
(vect_get_peeling_costs_all_drs, vect_peeling_hash_get_lowest_cost)
(vect_peeling_supportable, vect_enhance_data_refs_alignment)
(vect_find_same_alignment_drs, vect_analyze_data_refs_alignment)
(vect_analyze_group_access_1, vect_analyze_group_access)
(vect_analyze_data_ref_access, vect_analyze_data_ref_accesses)
(vect_vfa_access_size, vect_small_gap_p, vect_analyze_data_refs)
(vect_supportable_dr_alignment): Remove vinfo_for_stmt from the
result of vect_dr_stmt and use the stmt_vec_info instead of
the associated gimple stmt.
* tree-vect-loop-manip.c (get_misalign_in_elems): Likewise.
(vect_gen_prolog_loop_niters): Likewise.
* tree-vect-loop.c (vect_analyze_loop_2): Likewise.
From-SVN: r263134
Richard Sandiford [Tue, 31 Jul 2018 14:23:20 +0000 (14:23 +0000)]
[18/46] Make SLP_TREE_SCALAR_STMTS a vec<stmt_vec_info>
This patch changes SLP_TREE_SCALAR_STMTS from a vec<gimple *> to
a vec<stmt_vec_info>. It's longer than the previous conversions
but mostly mechanical.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (_slp_tree::stmts): Change from a vec<gimple *>
to a vec<stmt_vec_info>.
* tree-vect-slp.c (vect_free_slp_tree): Update accordingly.
(vect_create_new_slp_node): Take a vec<gimple *> instead of a
vec<stmt_vec_info>.
(_slp_oprnd_info::def_stmts): Change from a vec<gimple *>
to a vec<stmt_vec_info>.
(bst_traits::value_type, bst_traits::value_type): Likewise.
(bst_traits::hash): Update accordingly.
(vect_get_and_check_slp_defs): Change the stmts parameter from
a vec<gimple *> to a vec<stmt_vec_info>.
(vect_two_operations_perm_ok_p, vect_build_slp_tree_1): Likewise.
(vect_build_slp_tree): Likewise.
(vect_build_slp_tree_2): Likewise. Update uses of
SLP_TREE_SCALAR_STMTS.
(vect_print_slp_tree): Update uses of SLP_TREE_SCALAR_STMTS.
(vect_mark_slp_stmts, vect_mark_slp_stmts_relevant)
(vect_slp_rearrange_stmts, vect_attempt_slp_rearrange_stmts)
(vect_supported_load_permutation_p, vect_find_last_scalar_stmt_in_slp)
(vect_detect_hybrid_slp_stmts, vect_slp_analyze_node_operations_1)
(vect_slp_analyze_node_operations, vect_slp_analyze_operations)
(vect_bb_slp_scalar_cost, vect_slp_analyze_bb_1)
(vect_get_constant_vectors, vect_get_slp_defs)
(vect_transform_slp_perm_load, vect_schedule_slp_instance)
(vect_remove_slp_scalar_calls, vect_schedule_slp): Likewise.
(vect_analyze_slp_instance): Build up a vec of stmt_vec_infos
instead of gimple stmts.
* tree-vect-data-refs.c (vect_slp_analyze_node_dependences): Change
the stores parameter for a vec<gimple *> to a vec<stmt_vec_info>.
(vect_slp_analyze_instance_dependence): Update uses of
SLP_TREE_SCALAR_STMTS.
(vect_slp_analyze_and_verify_node_alignment): Likewise.
(vect_slp_analyze_and_verify_instance_alignment): Likewise.
* tree-vect-loop.c (neutral_op_for_slp_reduction): Likewise.
(get_initial_defs_for_reduction): Likewise.
(vect_create_epilog_for_reduction): Likewise.
(vectorize_fold_left_reduction): Likewise.
* tree-vect-stmts.c (vect_prologue_cost_for_slp_op): Likewise.
(vect_model_simple_cost, vectorizable_shift, vectorizable_load)
(can_vectorize_live_stmts): Likewise.
From-SVN: r263133
Richard Sandiford [Tue, 31 Jul 2018 14:23:16 +0000 (14:23 +0000)]
[17/46] Make LOOP_VINFO_REDUCTIONS an auto_vec<stmt_vec_info>
This patch changes LOOP_VINFO_REDUCTIONS from an auto_vec<gimple *>
to an auto_vec<stmt_vec_info>. It also changes the associated
vect_force_simple_reduction so that it takes and returns stmt_vec_infos
instead of gimple stmts.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (_loop_vec_info::reductions): Change from an
auto_vec<gimple *> to an auto_vec<stmt_vec_info>.
(vect_force_simple_reduction): Take and return stmt_vec_infos rather
than gimple stmts.
* tree-parloops.c (valid_reduction_p): Take a stmt_vec_info instead
of a gimple stmt.
(gather_scalar_reductions): Update after above interface changes.
* tree-vect-loop.c (vect_analyze_scalar_cycles_1): Likewise.
(vect_is_simple_reduction): Take and return stmt_vec_infos rather
than gimple stmts.
(vect_force_simple_reduction): Likewise.
* tree-vect-patterns.c (vect_pattern_recog_1): Update use of
LOOP_VINFO_REDUCTIONS.
* tree-vect-slp.c (vect_analyze_slp_instance): Likewise.
From-SVN: r263132
Richard Sandiford [Tue, 31 Jul 2018 14:23:11 +0000 (14:23 +0000)]
[16/46] Make STMT_VINFO_REDUC_DEF a stmt_vec_info
This patch changes STMT_VINFO_REDUC_DEF from a gimple stmt to a
stmt_vec_info.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (_stmt_vec_info::reduc_def): Change from
a gimple stmt to a stmt_vec_info.
* tree-vect-loop.c (vect_active_double_reduction_p)
(vect_force_simple_reduction, vectorizable_reduction): Update
accordingly.
From-SVN: r263131
Richard Sandiford [Tue, 31 Jul 2018 14:22:17 +0000 (14:22 +0000)]
[15/46] Make SLP_TREE_VEC_STMTS a vec<stmt_vec_info>
This patch changes SLP_TREE_VEC_STMTS from a vec<gimple *> to a
vec<stmt_vec_info>. This involved making the same change to the
phis vector in vectorizable_reduction, since SLP_TREE_VEC_STMTS is
spliced into it here:
phis.splice (SLP_TREE_VEC_STMTS (slp_node_instance->reduc_phis));
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (_slp_tree::vec_stmts): Change from a
vec<gimple *> to a vec<stmt_vec_info>.
* tree-vect-loop.c (vect_create_epilog_for_reduction): Change
the reduction_phis argument from a vec<gimple *> to a
vec<stmt_vec_info>.
(vectorizable_reduction): Likewise the phis local variable that
is passed to vect_create_epilog_for_reduction. Update for new type
of SLP_TREE_VEC_STMTS.
(vectorizable_induction): Update for new type of SLP_TREE_VEC_STMTS.
(vectorizable_live_operation): Likewise.
* tree-vect-slp.c (vect_get_slp_vect_defs): Likewise.
(vect_transform_slp_perm_load, vect_schedule_slp_instance): Likewise.
From-SVN: r263130
Richard Sandiford [Tue, 31 Jul 2018 14:22:13 +0000 (14:22 +0000)]
[14/46] Make STMT_VINFO_VEC_STMT a stmt_vec_info
This patch changes STMT_VINFO_VEC_STMT from a gimple stmt to a
stmt_vec_info and makes the vectorizable_* routines pass back
a stmt_vec_info to vect_transform_stmt.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (_stmt_vec_info::vectorized_stmt): Change from
a gimple stmt to a stmt_vec_info.
(vectorizable_condition, vectorizable_live_operation)
(vectorizable_reduction, vectorizable_induction): Pass back the
vectorized statement as a stmt_vec_info.
* tree-vect-data-refs.c (vect_record_grouped_load_vectors): Update
use of STMT_VINFO_VEC_STMT.
* tree-vect-loop.c (vect_create_epilog_for_reduction): Likewise,
accumulating the inner phis that feed the STMT_VINFO_VEC_STMT
as stmt_vec_infos rather than gimple stmts.
(vectorize_fold_left_reduction): Change vec_stmt from a gimple stmt
to a stmt_vec_info.
(vectorizable_live_operation): Likewise.
(vectorizable_reduction, vectorizable_induction): Likewise,
updating use of STMT_VINFO_VEC_STMT.
* tree-vect-stmts.c (vect_get_vec_def_for_operand_1): Update use
of STMT_VINFO_VEC_STMT.
(vect_build_gather_load_calls, vectorizable_bswap, vectorizable_call)
(vectorizable_simd_clone_call, vectorizable_conversion)
(vectorizable_assignment, vectorizable_shift, vectorizable_operation)
(vectorizable_store, vectorizable_load, vectorizable_condition)
(vectorizable_comparison, can_vectorize_live_stmts): Change vec_stmt
from a gimple stmt to a stmt_vec_info.
(vect_transform_stmt): Update use of STMT_VINFO_VEC_STMT. Pass a
pointer to a stmt_vec_info to the vectorizable_* routines.
From-SVN: r263129
Richard Sandiford [Tue, 31 Jul 2018 14:22:09 +0000 (14:22 +0000)]
[13/46] Make STMT_VINFO_RELATED_STMT a stmt_vec_info
This patch changes STMT_VINFO_RELATED_STMT from a gimple stmt to a
stmt_vec_info.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (_stmt_vec_info::related_stmt): Change from
a gimple stmt to a stmt_vec_info.
(is_pattern_stmt_p): Update accordingly.
* tree-vect-data-refs.c (vect_preserves_scalar_order_p): Likewise.
(vect_record_grouped_load_vectors): Likewise.
* tree-vect-loop.c (vect_determine_vf_for_stmt): Likewise.
(vect_fixup_reduc_chain, vect_update_vf_for_slp): Likewise.
(vect_model_reduction_cost): Likewise.
(vect_create_epilog_for_reduction): Likewise.
(vectorizable_reduction, vectorizable_induction): Likewise.
* tree-vect-patterns.c (vect_init_pattern_stmt): Likewise.
Return the stmt_vec_info for the pattern statement.
(vect_set_pattern_stmt): Update use of STMT_VINFO_RELATED_STMT.
(vect_split_statement, vect_mark_pattern_stmts): Likewise.
* tree-vect-slp.c (vect_detect_hybrid_slp_stmts): Likewise.
(vect_detect_hybrid_slp, vect_get_slp_defs): Likewise.
* tree-vect-stmts.c (vect_mark_relevant): Likewise.
(vect_get_vec_def_for_operand_1, vectorizable_call): Likewise.
(vectorizable_simd_clone_call, vect_analyze_stmt, new_stmt_vec_info)
(free_stmt_vec_info, vect_is_simple_use): Likewise.
From-SVN: r263128
Richard Sandiford [Tue, 31 Jul 2018 14:22:05 +0000 (14:22 +0000)]
[12/46] Make vect_finish_stmt_generation return a stmt_vec_info
This patch makes vect_finish_replace_stmt and vect_finish_stmt_generation
return the stmt_vec_info for the vectorised statement, so that the caller
doesn't need a separate vinfo_for_stmt to get at it.
This involved changing the structure of the statement-generating loops
so that they use narrow scopes for the vectorised gimple statements
and use the existing (wider) scopes for the associated stmt_vec_infos.
This helps with gimple stmt->stmt_vec_info changes further down the line.
The way we do this generation is another area ripe for clean-up,
but that's too much of a rabbit-hole for this series.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (vect_finish_replace_stmt): Return a stmt_vec_info
(vect_finish_stmt_generation): Likewise.
* tree-vect-stmts.c (vect_finish_stmt_generation_1): Likewise.
(vect_finish_replace_stmt, vect_finish_stmt_generation): Likewise.
(vect_build_gather_load_calls): Use the return value of the above
functions instead of a separate call to vinfo_for_stmt. Use narrow
scopes for the input gimple stmt and wider scopes for the associated
stmt_vec_info. Use vec_info::lookup_def when setting these
stmt_vec_infos from an SSA_NAME definition.
(vectorizable_bswap, vectorizable_call, vectorizable_simd_clone_call)
(vect_create_vectorized_demotion_stmts, vectorizable_conversion)
(vectorizable_assignment, vectorizable_shift, vectorizable_operation)
(vectorizable_store, vectorizable_load, vectorizable_condition)
(vectorizable_comparison): Likewise.
* tree-vect-loop.c (vectorize_fold_left_reduction): Likewise.
(vectorizable_reduction): Likewise.
From-SVN: r263127
Richard Sandiford [Tue, 31 Jul 2018 14:22:01 +0000 (14:22 +0000)]
[11/46] Pass back a stmt_vec_info from vect_is_simple_use
This patch makes vect_is_simple_use pass back a stmt_vec_info to
those callers that want it. Most users only need the stmt_vec_info
but some need the gimple stmt too.
It's probably high time we added a class to represent "simple operands"
instead, but I have a separate series that tries to clean up how
operands are handled (with a view to allowing mixed vector sizes).
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (vect_is_simple_use): Add an optional
stmt_vec_info * parameter before the optional gimple **.
* tree-vect-stmts.c (vect_is_simple_use): Likewise.
(process_use, vect_get_vec_def_for_operand_1): Update callers.
(vect_get_vec_def_for_operand, vectorizable_shift): Likewise.
* tree-vect-loop.c (vectorizable_reduction): Likewise.
(vectorizable_live_operation): Likewise.
* tree-vect-patterns.c (type_conversion_p): Likewise.
(vect_look_through_possible_promotion): Likewise.
(vect_recog_rotate_pattern): Likewise.
* tree-vect-slp.c (vect_get_and_check_slp_defs): Likewise.
From-SVN: r263126
Richard Sandiford [Tue, 31 Jul 2018 14:21:56 +0000 (14:21 +0000)]
[10/46] Temporarily make stmt_vec_info a class
This patch turns stmt_vec_info into an unspeakably bad wrapper class
and adds an implicit conversion to the associated gimple stmt.
Having this conversion makes the rest of the series easier to write,
but since the class goes away again at the end of the series, I've
not bothered adding any comments or tried to make it pretty.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (stmt_vec_info): Temporarily change from
a typedef to a wrapper class.
(NULL_STMT_VEC_INFO): New macro.
(vec_info::stmt_infos): Change to vec<stmt_vec_info>.
(stmt_vec_info::operator*): New function.
(stmt_vec_info::operator gimple *): Likewise.
(set_vinfo_for_stmt): Use NULL_STMT_VEC_INFO.
(add_stmt_costs): Likewise.
* tree-vect-loop-manip.c (iv_phi_p): Likewise.
* tree-vect-loop.c (vect_compute_single_scalar_iteration_cost)
(vect_get_known_peeling_cost): Likewise.
(vect_estimate_min_profitable_iters): Likewise.
* tree-vect-patterns.c (vect_init_pattern_stmt): Likewise.
* tree-vect-slp.c (vect_remove_slp_scalar_calls): Likewise.
* tree-vect-stmts.c (vect_build_gather_load_calls): Likewise.
(vectorizable_store, free_stmt_vec_infos): Likewise.
(new_stmt_vec_info): Change return type of xcalloc to
_stmt_vec_info *.
From-SVN: r263125
Richard Sandiford [Tue, 31 Jul 2018 14:21:51 +0000 (14:21 +0000)]
[09/46] Add vec_info::lookup_single_use
This patch adds a helper function for seeing whether there is a single
user of an SSA name, and whether that user has a stmt_vec_info.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (vec_info::lookup_single_use): Declare.
* tree-vectorizer.c (vec_info::lookup_single_use): New function.
* tree-vect-loop.c (vectorizable_reduction): Use it instead of
a single_imm_use-based sequence.
* tree-vect-stmts.c (supportable_widening_operation): Likewise.
From-SVN: r263124
Richard Sandiford [Tue, 31 Jul 2018 14:21:45 +0000 (14:21 +0000)]
[08/46] Add vec_info::lookup_def
This patch adds a vec_info helper for checking whether an operand is an
SSA_NAME that is defined in the vectorisable region.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (vec_info::lookup_def): Declare.
* tree-vectorizer.c (vec_info::lookup_def): New function.
* tree-vect-patterns.c (vect_get_internal_def): Use it.
(vect_widened_op_tree): Likewise.
* tree-vect-stmts.c (vect_is_simple_use): Likewise.
* tree-vect-loop.c (vect_analyze_loop_operations): Likewise.
(vectorizable_reduction): Likewise.
(vect_valid_reduction_input_p): Take a stmt_vec_info instead
of a gimple *.
(vect_is_slp_reduction): Update calls accordingly. Use
vec_info::lookup_def.
(vect_is_simple_reduction): Likewise
* tree-vect-slp.c (vect_detect_hybrid_slp_1): Use vec_info::lookup_def.
From-SVN: r263123
Richard Sandiford [Tue, 31 Jul 2018 14:21:41 +0000 (14:21 +0000)]
[07/46] Add vec_info::lookup_stmt
This patch adds a vec_info replacement for vinfo_for_stmt. The main
difference is that the new routine can cope with arbitrary statements,
so there's no need to call vect_stmt_in_region_p first.
The patch only converts calls that are still needed at the end of the
series. Later patches get rid of most other calls to vinfo_for_stmt.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (vec_info::lookup_stmt): Declare.
* tree-vectorizer.c (vec_info::lookup_stmt): New function.
* tree-vect-loop.c (vect_determine_vf_for_stmt): Use it instead
of vinfo_for_stmt.
(vect_determine_vectorization_factor, vect_analyze_scalar_cycles_1)
(vect_compute_single_scalar_iteration_cost, vect_analyze_loop_form)
(vect_update_vf_for_slp, vect_analyze_loop_operations)
(vect_is_slp_reduction, vectorizable_induction)
(vect_transform_loop_stmt, vect_transform_loop): Likewise.
* tree-vect-patterns.c (vect_init_pattern_stmt):
(vect_determine_min_output_precision_1, vect_determine_precisions)
(vect_pattern_recog): Likewise.
* tree-vect-stmts.c (vect_analyze_stmt, vect_transform_stmt): Likewise.
* config/powerpcspe/powerpcspe.c (rs6000_density_test): Likewise.
* config/rs6000/rs6000.c (rs6000_density_test): Likewise.
* tree-vect-slp.c (vect_detect_hybrid_slp_stmts): Likewise.
(vect_detect_hybrid_slp_1, vect_detect_hybrid_slp_2)
(vect_detect_hybrid_slp): Likewise. Change the walk_stmt_info
info field from a loop to a loop_vec_info.
From-SVN: r263122
Richard Sandiford [Tue, 31 Jul 2018 14:21:37 +0000 (14:21 +0000)]
[06/46] Add vec_info::add_stmt
This patch adds a vec_info function for allocating and setting
stmt_vec_infos. It's the start of a long process of removing
the global stmt_vec_info array.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (stmt_vec_info): Move typedef earlier in file.
(vec_info::add_stmt): Declare.
* tree-vectorizer.c (vec_info::add_stmt): New function.
* tree-vect-data-refs.c (vect_create_data_ref_ptr): Use it.
* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Likewise.
(vect_create_epilog_for_reduction, vectorizable_reduction): Likewise.
(vectorizable_induction): Likewise.
* tree-vect-slp.c (_bb_vec_info::_bb_vec_info): Likewise.
* tree-vect-stmts.c (vect_finish_stmt_generation_1): Likewise.
(vectorizable_simd_clone_call, vectorizable_store): Likewise.
(vectorizable_load): Likewise.
* tree-vect-patterns.c (vect_init_pattern_stmt): Likewise.
(vect_recog_bool_pattern, vect_recog_mask_conversion_pattern)
(vect_recog_gather_scatter_pattern): Likewise.
(append_pattern_def_seq): Likewise. Remove a check that is
performed by add_stmt itself.
From-SVN: r263121
Richard Sandiford [Tue, 31 Jul 2018 14:21:32 +0000 (14:21 +0000)]
[05/46] Fix make_ssa_name call in vectorizable_reduction
The usual vectoriser dance to create new assignments is:
new_stmt = gimple_build_assign (vec_dest, ...);
new_temp = make_ssa_name (vec_dest, new_stmt);
gimple_assign_set_lhs (new_stmt, new_temp);
but one site in vectorizable_reduction used:
new_temp = make_ssa_name (vec_dest, new_stmt);
before creating new_stmt.
This method of creating statements probably needs cleaning up, but
that's for another day...
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vect-loop.c (vectorizable_reduction): Fix an instance in
which make_ssa_name was called with new_stmt before new_stmt
had been created.
From-SVN: r263120
Richard Sandiford [Tue, 31 Jul 2018 14:21:28 +0000 (14:21 +0000)]
[04/46] Factor out the test for a valid reduction input
vect_is_slp_reduction and vect_is_simple_reduction had two instances
each of:
&& (is_gimple_assign (def_stmt)
|| is_gimple_call (def_stmt)
|| STMT_VINFO_DEF_TYPE (vinfo_for_stmt (def_stmt))
== vect_induction_def
|| (gimple_code (def_stmt) == GIMPLE_PHI
&& STMT_VINFO_DEF_TYPE (vinfo_for_stmt (def_stmt))
== vect_internal_def
&& !is_loop_header_bb_p (gimple_bb (def_stmt)))))
This patch splits it out in a subroutine.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vect-loop.c (vect_valid_reduction_input_p): New function,
split out from...
(vect_is_slp_reduction): ...here...
(vect_is_simple_reduction): ...and here. Remove repetition of tests
that are already known to be false.
From-SVN: r263119
Richard Sandiford [Tue, 31 Jul 2018 14:21:23 +0000 (14:21 +0000)]
[03/46] Remove unnecessary update of NUM_SLP_USES
vect_free_slp_tree had:
gimple *stmt;
FOR_EACH_VEC_ELT (SLP_TREE_SCALAR_STMTS (node), i, stmt)
/* After transform some stmts are removed and thus their vinfo is gone. */
if (vinfo_for_stmt (stmt))
{
gcc_assert (STMT_VINFO_NUM_SLP_USES (vinfo_for_stmt (stmt)) > 0);
STMT_VINFO_NUM_SLP_USES (vinfo_for_stmt (stmt))--;
}
But after transform this update is redundant even for statements that do
exist, so it seems better to skip this loop for the final teardown.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vectorizer.h (vect_free_slp_instance): Add a final_p parameter.
* tree-vect-slp.c (vect_free_slp_tree): Likewise. Don't update
STMT_VINFO_NUM_SLP_USES when it's true.
(vect_free_slp_instance): Add a final_p parameter and pass it to
vect_free_slp_tree.
(vect_build_slp_tree_2): Update call to vect_free_slp_instance.
(vect_analyze_slp_instance): Likewise.
(vect_slp_analyze_operations): Likewise.
(vect_slp_analyze_bb_1): Likewise.
* tree-vectorizer.c (vec_info): Likewise.
* tree-vect-loop.c (vect_transform_loop): Likewise.
From-SVN: r263118
Richard Sandiford [Tue, 31 Jul 2018 14:21:17 +0000 (14:21 +0000)]
[02/46] Remove dead vectorizable_reduction code
vectorizable_reduction has old code to cope with cases in which the
given statement belongs to a reduction group but isn't the first statement.
That can no longer happen, since all statements in the group go into the
same SLP node, and we only check the first statement in each node.
The point is to remove the only path through vectorizable_reduction
in which stmt and stmt_info refer to different statements.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vect-loop.c (vectorizable_reduction): Assert that the
function is not called for second and subsequent members of
a reduction group.
From-SVN: r263117
Richard Sandiford [Tue, 31 Jul 2018 14:21:11 +0000 (14:21 +0000)]
[01/46] Move special cases out of get_initial_def_for_reduction
This minor clean-up avoids repeating the test for double reductions
and also moves the vect_get_vec_def_for_operand call to the same
function as the corresponding vect_get_vec_def_for_stmt_copy.
2018-07-31 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vect-loop.c (get_initial_def_for_reduction): Move special
cases for nested loops from here to ...
(vect_create_epilog_for_reduction): ...here. Only call
vect_is_simple_use for inner-loop reductions.
From-SVN: r263116
Jakub Jelinek [Tue, 31 Jul 2018 14:19:26 +0000 (16:19 +0200)]
P1008R1 - prohibit aggregates with user-declared constructors
P1008R1 - prohibit aggregates with user-declared constructors
* class.c (check_bases_and_members): For C++2a set
CLASSTYPE_NON_AGGREGATE based on TYPE_HAS_USER_CONSTRUCTOR rather than
type_has_user_provided_or_explicit_constructor.
* g++.dg/ext/is_aggregate.C: Add tests with deleted or defaulted ctor.
* g++.dg/cpp0x/defaulted1.C (main): Ifdef out for C++2a B b = {1};.
* g++.dg/cpp0x/deleted2.C: Expect error for C++2a.
* g++.dg/cpp2a/aggr1.C: New test.
* g++.dg/cpp2a/aggr2.C: New test.
From-SVN: r263115
Segher Boessenkool [Tue, 31 Jul 2018 14:01:29 +0000 (16:01 +0200)]
arm: Testcase for PR86640
gcc/testsuite/
PR target/86640
* gcc.target/arm/pr86640.c: New testcase.
From-SVN: r263114
Martin Liska [Tue, 31 Jul 2018 10:34:36 +0000 (12:34 +0200)]
GCOV: add cache for streamed locations.
2018-07-31 Martin Liska <mliska@suse.cz>
PR gcov-profile/85338
PR gcov-profile/85350
PR gcov-profile/85372
* profile.c (struct location_triplet): New.
(struct location_triplet_hash): Likewise.
(output_location): Do not output a BB that
is already recorded for a line.
(branch_prob): Use streamed_locations.
2018-07-31 Martin Liska <mliska@suse.cz>
PR gcov-profile/85338
PR gcov-profile/85350
PR gcov-profile/85372
* gcc.misc-tests/gcov-pr85338.c: New test.
* gcc.misc-tests/gcov-pr85350.c: New test.
* gcc.misc-tests/gcov-pr85372.c: New test.
From-SVN: r263113
Martin Liska [Tue, 31 Jul 2018 10:34:02 +0000 (12:34 +0200)]
Fix target clones (PR gcov-profile/85370).
2018-07-31 Martin Liska <mliska@suse.cz>
PR gcov-profile/85370
* coverage.c (coverage_begin_function): Do not mark target
clones as artificial functions.
From-SVN: r263112
Martin Liska [Tue, 31 Jul 2018 10:33:21 +0000 (12:33 +0200)]
Fix GCOV CFG related issues.
2018-07-31 Martin Liska <mliska@suse.cz>
PR gcov-profile/83813
PR gcov-profile/84758
PR gcov-profile/85217
PR gcov-profile/85332
* profile.c (branch_prob): Do not record GOTO expressions
for GIMPLE statements which locations are already streamed.
2018-07-31 Martin Liska <mliska@suse.cz>
PR gcov-profile/83813
PR gcov-profile/84758
PR gcov-profile/85217
PR gcov-profile/85332
* gcc.misc-tests/gcov-pr83813.c: New test.
* gcc.misc-tests/gcov-pr84758.c: New test.
* gcc.misc-tests/gcov-pr85217.c: New test.
* gcc.misc-tests/gcov-pr85332.c: New test.
From-SVN: r263111
Martin Liska [Tue, 31 Jul 2018 10:32:13 +0000 (12:32 +0200)]
Fix an UBSAN error in cp/parse.c (PR c++/86653).
2018-07-31 Martin Liska <mliska@suse.cz>
PR c++/86653
* parser.c (cp_parser_condition): Initialize non_constant_p
to false.
From-SVN: r263110
Arnaud Charlet [Tue, 31 Jul 2018 09:56:59 +0000 (09:56 +0000)]
[Ada] Various code clean-ups from CodePeer messages
2018-07-31 Arnaud Charlet <charlet@adacore.com>
gcc/ada/
* clean.adb, gnatchop.adb, gnatfind.adb, gnatls.adb,
gnatmake.ads, gnatxref.adb, make.adb, make.ads, make_util.ads,
sfn_scan.adb, vxaddr2line.adb, xeinfo.adb, xoscons.adb,
xr_tabls.adb, xref_lib.adb: Address CodePeer messages.
From-SVN: r263108
Arnaud Charlet [Tue, 31 Jul 2018 09:56:53 +0000 (09:56 +0000)]
[Ada] Fix potential Constraint_Error if Library_Version is too long
2018-07-31 Arnaud Charlet <charlet@adacore.com>
gcc/ada/
* gnatlink.adb: Fix potential Constraint_Error if
Library_Version is too long.
From-SVN: r263107
Arnaud Charlet [Tue, 31 Jul 2018 09:56:48 +0000 (09:56 +0000)]
[Ada] Sem_Elab: remove duplicate condition
2018-07-31 Arnaud Charlet <charlet@adacore.com>
gcc/ada/
* sem_elab.adb: Remove duplicate condition detected by CodePeer.
From-SVN: r263106
Ed Schonberg [Tue, 31 Jul 2018 09:56:43 +0000 (09:56 +0000)]
[Ada] Unnesting: improve support for entries in protected objects
2018-07-31 Ed Schonberg <schonberg@adacore.com>
gcc/ada/
* exp_unst.adb (Subp_Index): In the case of a protected
operation, the relevant entry is the generated
protected_subprogram_body into which the original body is
rewritten. Assorted cleanup and optimizations.
From-SVN: r263105
Ed Schonberg [Tue, 31 Jul 2018 09:56:36 +0000 (09:56 +0000)]
[Ada] Refine generation of range checks to happen in front end
2018-07-31 Ed Schonberg <schonberg@adacore.com>
gcc/ada/
* exp_attr.adb (Expand_Attribute, case Fixed_Value): Set the
base type of the result to ensure that proper overflow and range
checks are generated. If the target is a fixed-point tyoe,
generate the required overflow and range checks explicitly,
rather than relying on Apply_Type_Conversion_Checks, which might
simply set the Do_Range_Check flag and rely on the backend to
add the check.
From-SVN: r263104
Hristian Kirtchev [Tue, 31 Jul 2018 09:56:31 +0000 (09:56 +0000)]
[Ada] Secondary stack leak with access-to-subprogram
This patch modifies call resolution to recognize when the designated type of
an access-to-subprogram requires secondary stack management, and establish
the proper transient block.
------------
-- Source --
------------
-- leak7.adb
procedure Leak7 is
Max_Iterations : constant := 10_000;
function Func return String is
begin
return "Will this leak? Or will it dry?";
end Func;
type Func_Ptr is access function return String;
procedure Anonymous_Leak (Func : access function return String) is
begin
for Iteration in 1 .. Max_Iterations loop
declare
Val : constant String := Func.all;
begin null; end;
end loop;
end Anonymous_Leak;
procedure Named_Leak (Func : Func_Ptr) is
begin
for Iteration in 1 .. Max_Iterations loop
declare
Val : constant String := Func.all;
begin null; end;
end loop;
end Named_Leak;
begin
Anonymous_Leak (Func'Access);
Named_Leak (Func'Access);
end Leak7;
----------------------------
-- Compilation and output --
----------------------------
$ gnatmake -q leak7.adb
$ valgrind ./leak7 >& leak7.txt
$ grep -c "still reachable" leak7.txt
0
2018-07-31 Hristian Kirtchev <kirtchev@adacore.com>
gcc/ada/
* sem_res.adb (Resolve_Call): Establish a transient scope to
manage the secondary stack when the designated type of an
access-to-subprogram requires it.
From-SVN: r263103
Ed Schonberg [Tue, 31 Jul 2018 09:56:26 +0000 (09:56 +0000)]
[Ada] Unnesting: find local subps in nested stmt sequences
2018-07-31 Ed Schonberg <schonberg@adacore.com>
gcc/ada
* exp_ch7.adb (Check_Unnesting_Elaboration_Code): To find local
subprograms in the elaboration code for a package body, recurse
through nested statement sequences because a compiler-generated
procedure may appear within a condition statement.
From-SVN: r263102
Ed Schonberg [Tue, 31 Jul 2018 09:56:21 +0000 (09:56 +0000)]
[Ada] Spurious error on default parameter in protected operation
This patch fixes a spurious compiler error on a call to a protected
operation whose profile includes a defaulted in-parameter that is a call
to another protected function of the same object.
2018-07-31 Ed Schonberg <schonberg@adacore.com>
gcc/ada/
* exp_ch6.adb (Expand_Protected_Subprogram_Call): Handle
properly a protected call that includes a default parameter that
is a call to a protected function of the same type.
gcc/testsuite/
* gnat.dg/prot5.adb, gnat.dg/prot5_pkg.adb,
gnat.dg/prot5_pkg.ads: New testcase.
From-SVN: r263101
Justin Squirek [Tue, 31 Jul 2018 09:56:15 +0000 (09:56 +0000)]
[Ada] GNATmake fails to detect missing body
This patch corrects an issue whereby building a multi-unit compilation with
missing sources resulted in a cryptic "code generation" error instead of the
appropriate file not found error.
------------
-- Source --
------------
-- main.adb
with Types;
procedure Main is
begin
null;
end;
-- types.ads
package Types is
procedure Force;
end;
----------------------------
-- Compilation and output --
----------------------------
& gnatmake -q main.adb
gnatmake: "types.adb" not found
2018-07-31 Justin Squirek <squirek@adacore.com>
gcc/ada/
* lib-writ.adb (Write_With_Lines): Modfiy the generation of
dependencies within ali files so that source unit bodies are
properly listed even if said bodies are missing. Perform legacy
behavior in GNATprove mode.
* lib-writ.ads: Modify documentation to reflect current behavior.
From-SVN: r263100
Eric Botcazou [Tue, 31 Jul 2018 09:56:10 +0000 (09:56 +0000)]
[Ada] Fix alignment of mutex_t and cond_t type on 32-bit SPARC/Solaris
The alignment of the couple of types from System.OS_Interface was wrongly
set to 4 (32-bit) instead of 8 (64-bit) in 32-bit mode.
2018-07-31 Eric Botcazou <ebotcazou@adacore.com>
gcc/ada/
* libgnarl/s-osinte__solaris.ads (upad64_t): New private type.
(mutex_t): Use it for 'lock' and 'data' components.
(cond_t): Likewise for 'data' and use single 'flags' component.
From-SVN: r263099
Justin Squirek [Tue, 31 Jul 2018 09:56:04 +0000 (09:56 +0000)]
[Ada] Wrong value after assignment of overlain record objects
This patch corrects an issue whereby objects of a record type with a
representation clause which are overlain by address would fail to get
assigned values properly when one or both of said objects were marked
volatile.
2018-07-31 Justin Squirek <squirek@adacore.com>
gcc/ada/
* exp_ch5.adb (Make_Field_Assign): Force temporarily generated
objects for assignment of overlaid user objects to be renamings
instead of constant declarations.
gcc/testsuite/
* gnat.dg/addr11.adb: New testcase.
From-SVN: r263098
Hristian Kirtchev [Tue, 31 Jul 2018 09:55:59 +0000 (09:55 +0000)]
[Ada] Spurious error on the placement of aspect Global
This patch modifies the expansion of stand-alone subprogram bodies that appear
in the body of a protected type to properly associate aspects and pragmas to
the newly created spec for the subprogram body. As a result, the annotations
are properly associated with the initial declaration of the subprogram.
2018-07-31 Hristian Kirtchev <kirtchev@adacore.com>
gcc/ada/
* exp_ch9.adb (Analyze_Pragmas): New routine.
(Build_Private_Protected_Declaration): Code clean up. Relocate
relevant aspects and pragmas from the stand-alone body to the
newly created spec. Explicitly analyze any pragmas that have
been either relocated or produced by the analysis of the
aspects.
(Move_Pragmas): New routine.
* sem_prag.adb (Find_Related_Declaration_Or_Body): Recognize the
case where a pragma applies to the internally created spec for a
stand-along subprogram body declared in a protected body.
gcc/testsuite/
* gnat.dg/global.adb, gnat.dg/global.ads: New testcase.
From-SVN: r263097
Gary Dismukes [Tue, 31 Jul 2018 09:55:53 +0000 (09:55 +0000)]
[Ada] Compiler failure on an extended_return_statement in a block
When compiling with an assertion-enabled compiler, Assert_Failure can be
raised when expanded an extended_return_statement whose enclosing scope
is not a function (such as when it's a block_statement). The simple fix
is to change the Assert to test Current_Subprogram rather than Current_Scope.
Three such Assert pragmas are corrected in this way.
2018-07-31 Gary Dismukes <dismukes@adacore.com>
gcc/ada/
* exp_ch6.adb (Expand_N_Extended_Return_Statement): Replace
calls to Current_Scope in three assertions with calls to
Current_Subprogram.
gcc/testsuite/
* gnat.dg/block_ext_return_assert_failure.adb: New testcase.
From-SVN: r263096
Ed Schonberg [Tue, 31 Jul 2018 09:55:48 +0000 (09:55 +0000)]
[Ada] Spurious warning on iteration over range of 64-bit modular type
This patch suppresses a spurious warning on the use of a 64-bit modular type
in a quantified expression, where the range of iteration will include a bound
that appears larger than the run-time representation of Universal_Integer'last.
2018-07-31 Ed Schonberg <schonberg@adacore.com>
gcc/ada/
* sem_eval.adb (Check_Non_Static_Context): Do not warn on an
integer literal greater than the upper bound of
Universal_Integer'Last when expansion is disabled, to avoid a
spurious warning over ranges involving 64-bit modular types.
gcc/testsuite/
* gnat.dg/iter3.adb: New testcase.
From-SVN: r263095
Arnaud Charlet [Tue, 31 Jul 2018 09:55:43 +0000 (09:55 +0000)]
[Ada] Print the Is_Activation_Record flag
2018-07-31 Arnaud Charlet <charlet@adacore.com>
gcc/ada/
* einfo.adb (Write_Entity_Flags): Also print
Is_Activation_Record flag.
From-SVN: r263094
Piotr Trojanek [Tue, 31 Jul 2018 09:55:37 +0000 (09:55 +0000)]
[Ada] Replace low-level calls to Ekind with high-level calls to Is_Formal
High-level wrappers are easier to read. This change came up while reading
some code related to GNATprove, but then uniformly applied to the entire
frontend. For the few remaining membership tests that could be replaced
by Is_Formal it is not obvious whether the high-level routine makes the
code better.
2018-07-31 Piotr Trojanek <trojanek@adacore.com>
gcc/ada/
* exp_aggr.adb, exp_ch4.adb, exp_ch6.adb, lib-xref.adb,
repinfo.adb, sem_ch9.adb: Minor replace Ekind membership tests
with a wrapper routine.
From-SVN: r263093
Piotr Trojanek [Tue, 31 Jul 2018 09:55:32 +0000 (09:55 +0000)]
[Ada] Deconstruct 'F' as a prefix for an ALI data
In GNATprove we used to store a variant of cross-reference information in
the ALI file in lines that started with an 'F' letter. This is no longer
the case, so the letter can be returned to the pool of unused prefixes.
2018-07-31 Piotr Trojanek <trojanek@adacore.com>
gcc/ada/
* ali.adb (Known_ALI_Lines): Remove 'F' as a prefix for lines
related to the FORMAL analysis done by GNATprove.
From-SVN: r263092
Javier Miranda [Tue, 31 Jul 2018 09:55:26 +0000 (09:55 +0000)]
[Ada] Fix a freezing issue
2018-07-31 Javier Miranda <miranda@adacore.com>
gcc/ada/
* sem.ads (Inside_Preanalysis_Without_Freezing): New global
counter.
* sem.adb (Semantics): This subprogram has now the
responsibility of resetting the counter before analyzing a unit,
and restoring its previous value before returning.
* freeze.adb (Freeze_Entity): Do not freeze if we are
preanalyzing without freezing.
* sem_res.adb (Preanalyze_And_Resolve): Set & restore
In_Preanalysis_Without_Freezing.
From-SVN: r263091
Ed Schonberg [Tue, 31 Jul 2018 09:55:21 +0000 (09:55 +0000)]
[Ada] Fix resolution of class-wide operations that are generic actuals
2018-07-31 Ed Schonberg <schonberg@adacore.com>
gcc/ada/
* sem_ch4.adb (Traverse_Homonyms): Consider generic actuals that
may rename a matching class-wide operation only if the renaming
declaration for that actual is in an enclosing scope (i.e.
within the corrresponding instance).
From-SVN: r263090
Hristian Kirtchev [Tue, 31 Jul 2018 09:55:16 +0000 (09:55 +0000)]
[Ada] Minor reformattings
2018-07-31 Hristian Kirtchev <kirtchev@adacore.com>
gcc/ada
* checks.adb, contracts.adb, exp_aggr.adb, exp_ch5.adb,
exp_disp.adb, make.adb, sem_ch4.adb, sem_eval.adb, sem_res.adb,
usage.adb: Minor reformatting.
From-SVN: r263089
Bob Duff [Tue, 31 Jul 2018 09:55:11 +0000 (09:55 +0000)]
[Ada] Spurious error -- "allocation from empty storage pool"
This patch fixes a bug in which if "pragma Default_Storage_Pool (null);"
is given, then a build-in-place function will get an incorrect error
message "allocation from empty storage pool" even though there is no
such allocation in the source program.
2018-07-31 Bob Duff <duff@adacore.com>
gcc/ada/
* sem_res.adb (Resolve_Allocator): Do not complain about the
implicit allocator that occurs in the expansion of a return
statement for a build-in-place function.
From-SVN: r263088
Olivier Hainque [Tue, 31 Jul 2018 09:44:48 +0000 (09:44 +0000)]
Improve specs processing to allow %* in function arguments
2018-07-31 Olivier Hainque <hainque@adacore.com>
* gcc.c (handle_spec_function): Accept a soft_matched_part
argument, as do_spec_1. Pass it down to ...
(eval_spec_function): Accept a soft_matched_part argument,
and pass it down to ...
(do_spec_2): Accept a soft_matched_part argument, and pass
it down to do_spec_1.
(do_spec_1): Pass soft_matched_part to handle_spec_function.
(handle_braces): Update call to handle_spec_function.
(driver::set_up_specs): Update calls to do_spec_2.
(compare_debug_dump_opt_spec_function): Likewise.
(compare_debug_self_opt_spec_function): Likewise.
From-SVN: r263087
Olivier Hainque [Tue, 31 Jul 2018 09:24:41 +0000 (09:24 +0000)]
Add support for -nolibc
2018-06-07 Olivier Hainque <hainque@adacore.com>
* common.opt (nolibc): New option.
* doc/invoke.texi (Link Options): Document it.
* gcc.c (LINK_GCC_C_SEQUENCE_SPEC): Honor nolibc.
* config/alpha/linux.h: Likewise.
* config/arc/elf.h: Likewise.
* config/arm/uclinux-elf.h: Likewise.
* config/arm/unknown-elf.h: Likewise.
* config/avr/avrlibc.h: Likewise.
* config/bfin/bfin.h: Likewise.
* config/bfin/linux.h: Likewise.
* config/bfin/uclinux.h: Likewise.
* config/darwin.h: Likewise.
* config/darwin10.h: Likewise.
* config/darwin12.h: Likewise.
* config/gnu-user.h: Likewise.
* config/lm32/uclinux-elf.h: Likewise.
* config/pa/pa-hpux11.h: Likewise.
* config/pa/pa64-hpux.h: Likewise.
* config/sparc/sparc.h: Likewise.
From-SVN: r263083
Andre Vieira [Tue, 31 Jul 2018 08:42:21 +0000 (08:42 +0000)]
Reverting 'AsyncI/O patch committed' as it is breaking bare-metal builds.
2018-07-31 Andre Vieira <andre.simoesdiasvieira@arm.com>
Revert 'AsyncI/O patch committed'
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* gfortran.texi: Add description of asynchronous I/O.
* trans-decl.c (gfc_finish_var_decl): Treat asynchronous variables
as volatile.
* trans-io.c (gfc_build_io_library_fndecls): Rename st_wait to
st_wait_async and change argument spec from ".X" to ".w".
(gfc_trans_wait): Pass ID argument via reference.
2018-07-31 Andre Vieira <andre.simoesdiasvieira@arm.com>
Revert 'AsyncI/O patch committed'
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* gfortran.dg/f2003_inquire_1.f03: Add write statement.
* gfortran.dg/f2003_io_1.f03: Add wait statement.
2018-07-31 Andre Vieira <andre.simoesdiasvieira@arm.com>
Revert 'AsyncI/O patch committed'
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* Makefile.am: Add async.c to gfor_io_src.
Add async.h to gfor_io_headers.
* Makefile.in: Regenerated.
* gfortran.map: Add _gfortran_st_wait_async.
* io/async.c: New file.
* io/async.h: New file.
* io/close.c: Include async.h.
(st_close): Call async_wait for an asynchronous unit.
* io/file_pos.c (st_backspace): Likewise.
(st_endfile): Likewise.
(st_rewind): Likewise.
(st_flush): Likewise.
* io/inquire.c: Add handling for asynchronous PENDING
and ID arguments.
* io/io.h (st_parameter_dt): Add async bit.
(st_parameter_wait): Correct.
(gfc_unit): Add au pointer.
(st_wait_async): Add prototype.
(transfer_array_inner): Likewise.
(st_write_done_worker): Likewise.
* io/open.c: Include async.h.
(new_unit): Initialize asynchronous unit.
* io/transfer.c (async_opt): New struct.
(wrap_scalar_transfer): New function.
(transfer_integer): Call wrap_scalar_transfer to do the work.
(transfer_real): Likewise.
(transfer_real_write): Likewise.
(transfer_character): Likewise.
(transfer_character_wide): Likewise.
(transfer_complex): Likewise.
(transfer_array_inner): New function.
(transfer_array): Call transfer_array_inner.
(transfer_derived): Call wrap_scalar_transfer.
(data_transfer_init): Check for asynchronous I/O.
Perform a wait operation on any pending asynchronous I/O
if the data transfer is synchronous. Copy PDT and enqueue
thread for data transfer.
(st_read_done_worker): New function.
(st_read_done): Enqueue transfer or call st_read_done_worker.
(st_write_done_worker): New function.
(st_write_done): Enqueue transfer or call st_read_done_worker.
(st_wait): Document as no-op for compatibility reasons.
(st_wait_async): New function.
* io/unit.c (insert_unit): Use macros LOCK, UNLOCK and TRYLOCK;
add NOTE where necessary.
(get_gfc_unit): Likewise.
(init_units): Likewise.
(close_unit_1): Likewise. Call async_close if asynchronous.
(close_unit): Use macros LOCK and UNLOCK.
(finish_last_advance_record): Likewise.
(newunit_alloc): Likewise.
* io/unix.c (find_file): Likewise.
(flush_all_units_1): Likewise.
(flush_all_units): Likewise.
* libgfortran.h (generate_error_common): Add prototype.
* runtime/error.c: Include io.h and async.h.
(generate_error_common): New function.
2018-07-31 Andre Vieira <andre.simoesdiasvieira@arm.com>
Revert 'AsyncI/O patch committed'.
2018-07-25 Nicolas Koenig <koenigni@gcc.gnu.org>
Thomas Koenig <tkoenig@gcc.gnu.org>
PR fortran/25829
* testsuite/libgomp.fortran/async_io_1.f90: New test.
* testsuite/libgomp.fortran/async_io_2.f90: New test.
* testsuite/libgomp.fortran/async_io_3.f90: New test.
* testsuite/libgomp.fortran/async_io_4.f90: New test.
* testsuite/libgomp.fortran/async_io_5.f90: New test.
* testsuite/libgomp.fortran/async_io_6.f90: New test.
* testsuite/libgomp.fortran/async_io_7.f90: New test.
From-SVN: r263082
Olivier Hainque [Tue, 31 Jul 2018 08:30:41 +0000 (08:30 +0000)]
getenv_spec_function to prepend / to value for undef var
So the value can be used in places where an absolute path
is expected.
2018-07-31 Olivier Hainque <hainque@adacore.com>
* gcc.c (getenv_spec_function): Prepend '/' to value for
allowed undefined variables.
From-SVN: r263081
GCC Administrator [Tue, 31 Jul 2018 00:16:35 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r263080
Segher Boessenkool [Mon, 30 Jul 2018 17:50:26 +0000 (19:50 +0200)]
arm: Generate correct const_ints (PR86640)
In arm_block_set_aligned_vect 8-bit constants are generated as zero-
extended const_ints, not sign-extended as required. Fix that.
PR target/86640
* config/arm/arm.c (arm_block_set_aligned_vect): Use gen_int_mode
instead of GEN_INT.
From-SVN: r263075
Jonathan Wakely [Mon, 30 Jul 2018 17:13:05 +0000 (18:13 +0100)]
PR libstdc++/86734 make reverse_iterator::operator-> more robust
Implement the proposed resolution from LWG 1052, which also resolves
DR 2118 by avoiding taking the address in the first place.
PR libstdc++/86734
* include/bits/stl_iterator.h (reverse_iterator::operator->): Call
_S_to_pointer (LWG 1052, LWG 2118).
(reverse_iterator::_S_to_pointer): Define overloaded helper functions.
* testsuite/24_iterators/reverse_iterator/dr1052.cc: New test.
* testsuite/24_iterators/reverse_iterator/dr2188.cc: New test.
From-SVN: r263074
Jonathan Wakely [Mon, 30 Jul 2018 17:12:44 +0000 (18:12 +0100)]
Add workaround for aligned_alloc bug on AIX
20_util/memory_resource/2.cc FAILs on AIX 7.2.0.0, because aligned_alloc
incorrectly requires the alignment to be a multiple of sizeof(void*).
This adds a workaround to the operator new overload taking an alignment
value, to increase the alignment (and size) if needed.
* libsupc++/new_opa.cc (operator new(size_t, align_val_t)): Add
workaround for aligned_alloc bug on AIX.
* testsuite/18_support/new_aligned.cc: New test.
From-SVN: r263073
Segher Boessenkool [Mon, 30 Jul 2018 16:11:44 +0000 (18:11 +0200)]
testcase for 2-2 combine
gcc/testsuite/
PR rtl-optimization/85160
* gcc.target/powerpc/combine-2-2.c: New testcase.
From-SVN: r263072
Joseph Myers [Mon, 30 Jul 2018 15:31:04 +0000 (16:31 +0100)]
* de.po, sv.po: Update.
From-SVN: r263070
Tom Tromey [Mon, 30 Jul 2018 13:47:01 +0000 (13:47 +0000)]
cplus-dem.c (remember_Btype): Don't call memcpy with LEN==0.
2018-07-30 Tom Tromey <tom@tromey.com>
* cplus-dem.c (remember_Btype): Don't call memcpy with LEN==0.
From-SVN: r263069
Bernd Edlinger [Mon, 30 Jul 2018 13:26:25 +0000 (13:26 +0000)]
tree-ssa-forwprop.c (simplify_builtin_call): Don't create a not NUL terminated string literal.
2018-07-30 Bernd Edlinger <bernd.edlinger@hotmail.de>
* tree-ssa-forwprop.c (simplify_builtin_call): Don't create a not NUL
terminated string literal.
From-SVN: r263068
Segher Boessenkool [Mon, 30 Jul 2018 13:18:17 +0000 (15:18 +0200)]
combine: Allow combining two insns to two insns
This patch allows combine to combine two insns into two. This helps
in many cases, by reducing instruction path length, and also allowing
further combinations to happen. PR85160 is a typical example of code
that it can improve.
This patch does not allow such combinations if either of the original
instructions was a simple move instruction. In those cases combining
the two instructions increases register pressure without improving the
code. With this move test register pressure does no longer increase
noticably as far as I can tell.
(At first I also didn't allow either of the resulting insns to be a
move instruction. But that is actually a very good thing to have, as
should have been obvious).
PR rtl-optimization/85160
* combine.c (is_just_move): New function.
(try_combine): Allow combining two instructions into two if neither of
the original instructions was a move.
From-SVN: r263067
Christophe Lyon [Mon, 30 Jul 2018 12:51:42 +0000 (12:51 +0000)]
[ARM] libgcc: Fix comment for code working on architectures >= 4.
2018-07-30 Christophe Lyon <christophe.lyon@linaro.org>
* config/arm/ieee754-df.S: Fix comment for code working on
architectures >= 4.
* config/arm/ieee754-sf.S: Likewise.
From-SVN: r263066
Alexander Monakov [Mon, 30 Jul 2018 12:26:37 +0000 (15:26 +0300)]
doc: discourage const/volatile on register variables (PR 86673)
PR target/86673
* doc/extend.texi (Global Register Variables): Discourage use of type
qualifiers.
(Local Register Variables): Likewise.
From-SVN: r263065
Richard Sandiford [Mon, 30 Jul 2018 11:23:26 +0000 (11:23 +0000)]
Resync inline implementation of ceil_log2 (PR 86506)
In r262961 I only updated the out-of-line copy of ceil_log2. This patch
applies the same change to the other (inline) one.
2018-07-30 Richard Sandiford <richard.sandiford@arm.com>
gcc/
PR tree-optimization/86506
* hwint.h (ceil_log2): Resync with hwint.c implementation.
From-SVN: r263064
Ilya Leoshkevich [Mon, 30 Jul 2018 08:30:06 +0000 (08:30 +0000)]
lra: consider clobbers when selecting hard_regno to spill
The idea behind the rclass loop in spill_hard_reg_in_range() seems to
be: find a hard_regno, which in general conflicts with reload regno,
but does not do so between `from` and `to`, and then do the live range
splitting based on this information. To check the absence of conflicts,
we make use of insn_bitmap, which does not contain insns which clobber
the hard_regno.
gcc/ChangeLog:
2018-07-30 Ilya Leoshkevich <iii@linux.ibm.com>
PR target/86547
* lra-constraints.c (spill_hard_reg_in_range): When selecting the
hard_regno, make sure no insn between `from` and `to` clobbers it.
From-SVN: r263063
Tom de Vries [Mon, 30 Jul 2018 08:17:26 +0000 (08:17 +0000)]
[libgomp, nvptx] Handle per-function max-threads-per-block in default dims
Currently parallel-loop-1.c fails at -O0 on a Quadro M1200, because one of the
kernel launch configurations exceeds the resources available in the device, due
to the default dimensions chosen by the runtime.
This patch fixes that by taking the per-function max_threads_per_block into
account when using the default dimensions.
2018-07-30 Tom de Vries <tdevries@suse.de>
* plugin/plugin-nvptx.c (MIN, MAX): Redefine.
(nvptx_exec): Ensure worker and vector default dims don't exceed
targ_fn->max_threads_per_block.
From-SVN: r263062
Tom de Vries [Mon, 30 Jul 2018 08:17:16 +0000 (08:17 +0000)]
[libgomp, nvptx] Calculate default dims per device
The default dimensions are calculated using per-device properties, but
initialized once and used on all devices.
This patch fixes this problem by introducing per-device default dimensions.
2018-07-30 Tom de Vries <tdevries@suse.de>
* plugin/plugin-nvptx.c (struct ptx_device): Add default_dims field.
(nvptx_open_device): Init default_dims for device.
(nvptx_exec): Use default_dims from device.
From-SVN: r263061
Cesar Philippidis [Mon, 30 Jul 2018 08:16:52 +0000 (01:16 -0700)]
[nvptx, offloading] Determine default workers at runtime
Currently, if the user doesn't specify the number of workers for an openacc
region, the compiler hardcodes it to a default value.
This patch removes this functionality, such that the libgomp runtime can decide
on a default value.
2018-07-30 Cesar Philippidis <cesar@codesourcery.com>
Tom de Vries <tdevries@suse.de>
* config/nvptx/nvptx.c (PTX_GANG_DEFAULT): Rename to ...
(PTX_DEFAULT_RUNTIME_DIM): ... this.
(nvptx_goacc_validate_dims): Set default worker and gang dims to
PTX_DEFAULT_RUNTIME_DIM.
(nvptx_dim_limit): Ignore GOMP_DIM_WORKER.
Co-Authored-By: Tom de Vries <tdevries@suse.de>
From-SVN: r263060
GCC Administrator [Mon, 30 Jul 2018 00:16:40 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r263059
John David Anglin [Sun, 29 Jul 2018 15:50:13 +0000 (15:50 +0000)]
pa.c (pa_output_addr_vec): Align address table.
* config/pa/pa.c (pa_output_addr_vec): Align address table.
* config/pa/pa.h (JUMP_TABLES_IN_TEXT_SECTION): Revise comment.
* config/pa/pa32-linux.h (JUMP_TABLES_IN_TEXT_SECTION): Define.
From-SVN: r263051
GCC Administrator [Sun, 29 Jul 2018 00:16:24 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r263050
David Malcolm [Sat, 28 Jul 2018 17:03:56 +0000 (17:03 +0000)]
C++: clean up cp_printer
This makes it easier to compare cp_printer with gcc_cxxdiag_char_table
in c-format.c.
No functional change intended.
gcc/cp/ChangeLog:
* error.c (cp_printer): In the leading comment, move "%H" and "%I"
into alphabetical order, and add missing "%G" and "%K". Within
the switch statement, move cases 'G', 'H', 'I' and 'K' so that the
cases are in alphabetical order.
From-SVN: r263046
GCC Administrator [Sat, 28 Jul 2018 00:16:31 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r263045
Michael Meissner [Fri, 27 Jul 2018 22:13:36 +0000 (22:13 +0000)]
constraints.md (wG constraint): Delete, no longer used.
2018-07-27 Michael Meissner <meissner@linux.ibm.com>
* config/rs6000/constraints.md (wG constraint): Delete, no longer
used.
* config/rs6000/predicates.md (p9_fusion_reg_operand): Rename
predicate to reflect toc fusion has been deleted.
(toc_fusion_mem_raw): Delete, no longer used.
(toc_fusion_mem_wrapped): Likewise.
* config/rs6000/rs6000-cpus.def (POWERPC_MASKS): Delete toc
fusion mask bit.
* config/rs6000/rs6000-protos.h (fusion_wrap_memory_address):
Delete, no longer used.
* config/rs6000/rs6000.c (struct rs6000_reg_addr): Delete fields
meant to be used for toc fusion.
(rs6000_debug_print_mode): Delete toc fusion debugging.
(rs6000_debug_reg_global): Likewise.
(rs6000_init_hard_regno_mode_ok): Delete setting up fields for toc
fusion and secondary reload support that were never used.
(rs6000_option_override_internal): Delete TOC fusion, that was only
partially defined, and it did not work unless you also used the
-mcmodel= switch.
(rs6000_legitimate_address_p): Delete TOC fusion support.
(rs6000_opt_masks): Likewise.
(fusion_wrap_memory_address): Delete function, no longer used.
(fusion_split_address); Delete TOC fusion support.
* config/rs6000/rs6000.h (TARGET_TOC_FUSION_INT): Delete, no
longer used with toc fusion being deleted.
(TARGET_TOC_FUSION_FP): Likewise.
* config/rs6000/rs6000.md (UNSPEC_FUSION_ADDIS): Delete TOC fusion
UNSPEC.
(toc fusion spliter): Delete TOC fusion support.
(toc_fusionload_<mode>): Likewise.
(toc_fusionload_di): Likewise.
(fusion_gpr_load_<mode>): Delete generator function, this insn no
longer needs to be named. Rename predicate to delete TOC fusion.
(fusion_gpr_<P:mode>_<GPR_FUSION:mode>_load): Likewise.
(fusion_gpr_<P:mode>_<GPR_FUSION:mode>_store): Likewise.
(fusion_vsx_<P:mode>_<GPR_FUSION:mode>_load): Likewise.
(fusion_vsx_<P:mode>_<GPR_FUSION:mode>_store): Likewise.
(p9 fusion peephole2s): Rename predicate to delete TOC fusion.
From-SVN: r263039
Joseph Myers [Fri, 27 Jul 2018 19:47:23 +0000 (20:47 +0100)]
Update .po files.
* be.po, da.po, de.po, el.po, es.po, fi.po, fr.po, hr.po, id.po,
ja.po, nl.po, ru.po, sr.po, sv.po, tr.po, uk.po, vi.po, zh_CN.po,
zh_TW.po: Update.
From-SVN: r263036
Ian Lance Taylor [Fri, 27 Jul 2018 18:43:34 +0000 (18:43 +0000)]
libgo: prune sighandler frames in runtime.sigprof
When writing stack frames to the pprof CPU profile machinery, it is
very important to insure that the frames emitted do not contain any
frames corresponding to artifacts of the profiling process itself
(signal handlers, sigprof, etc). This patch changes runtime.sigprof to
strip out those frames from the raw stack generated by
"runtime.callers".
Fixes golang/go#26595.
Reviewed-on: https://go-review.googlesource.com/126175
From-SVN: r263035
Kelvin Nilsen [Fri, 27 Jul 2018 17:38:10 +0000 (17:38 +0000)]
extend.texi (Basic PowerPC Built-in Functions Available on ISA 2.05): Replace __uint128_t with __uint128 and __int128_t with __int128 in built-in...
gcc/ChangeLog:
2018-07-27 Kelvin Nilsen <kelvin@gcc.gnu.org>
* doc/extend.texi (Basic PowerPC Built-in Functions Available on
ISA 2.05): Replace __uint128_t with __uint128 and __int128_t with
__int128 in built-in function prototypes.
(PowerPC AltiVec Built-in Functions on ISA 2.07): Likewise.
(PowerPC AltiVec Built-in Functions on ISA 3.0): Likewise.
From-SVN: r263033
Martin Sebor [Fri, 27 Jul 2018 17:06:44 +0000 (17:06 +0000)]
PR tree-optimization/86696 - ICE in handle_char_store at gcc/tree-ssa-strlen.c:3332
gcc/ChangeLog:
PR tree-optimization/86696
* tree-ssa-strlen.c (get_min_string_length): Handle all integer
types, including enums.
(handle_char_store): Be prepared for the above function to fail.
gcc/testsuite/ChangeLog:
PR tree-optimization/86696
* gcc.dg/pr86696.C: New test.
From-SVN: r263032
David Malcolm [Fri, 27 Jul 2018 16:57:01 +0000 (16:57 +0000)]
Fixes to testcase for PR tree-optimization/86636
gcc/testsuite/ChangeLog:
PR tree-optimization/86636
* gcc.c-torture/compile/pr86636.c: Add dg-do compile.
Add dg-require-effective-target pthread.
From-SVN: r263031
H.J. Lu [Fri, 27 Jul 2018 14:40:47 +0000 (14:40 +0000)]
i386: Remove _Unwind_Frames_Increment
CET kernel has been changed to place a restore token on shadow stack for
signal handler to enhance security. It is usually transparent to user
programs since kernel will pop the restore token when signal handler
returns. But when an exception is thrown from a signal handler, now
we need to remove _Unwind_Frames_Increment to pop the the restore token
from shadow stack. Otherwise, we get
FAIL: g++.dg/torture/pr85334.C -O0 execution test
FAIL: g++.dg/torture/pr85334.C -O1 execution test
FAIL: g++.dg/torture/pr85334.C -O2 execution test
FAIL: g++.dg/torture/pr85334.C -O3 -g execution test
FAIL: g++.dg/torture/pr85334.C -Os execution test
FAIL: g++.dg/torture/pr85334.C -O2 -flto -fno-use-linker-plugin -flto-partition=none execution test
PR libgcc/85334
* config/i386/shadow-stack-unwind.h (_Unwind_Frames_Increment):
Removed.
From-SVN: r263030
Qing Zhao [Fri, 27 Jul 2018 01:56:57 +0000 (01:56 +0000)]
Disable strcmp/strncmp/memcmp inlining when optimization
level is lower than 2 or Os
From-SVN: r263028
GCC Administrator [Fri, 27 Jul 2018 00:16:26 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r263027
Marek Polacek [Thu, 26 Jul 2018 21:23:12 +0000 (21:23 +0000)]
* 30_threads/condition_variable_any/cond.cc: New test.
From-SVN: r263022
Pat Haugen [Thu, 26 Jul 2018 20:41:25 +0000 (20:41 +0000)]
re PR target/86612 (__strdup problem on power 9)
PR target/86612
* gcc.target/powerpc/pr58673-2.c: Call strdup.
From-SVN: r263020
Martin Sebor [Thu, 26 Jul 2018 16:45:43 +0000 (16:45 +0000)]
PR tree-optimization/86043 - strlen after memcpy partially overwriting a string not optimized
PR tree-optimization/86043 - strlen after memcpy partially overwriting a string not optimized
PR tree-optimization/86042 - missing strlen optimization after second strcpy
gcc/ChangeLog:
PR tree-optimization/86043
PR tree-optimization/86042
* tree-ssa-strlen.c (handle_builtin_memcpy): Handle strict overlaps.
(get_string_cst_length): Rename...
(get_min_string_length): ...to this. Add argument.
(handle_char_store): Extend to handle multi-character stores by
MEM_REF.
* tree.c (initializer_zerop): Use new argument. Handle MEM_REF.
* tree.h (initializer_zerop): Add argument.
gcc/testsuite/ChangeLog:
PR tree-optimization/86043
PR tree-optimization/86042
* gcc/testsuite/gcc.dg/attr-nonstring-2.c: Xfail test cases due to
pr86688.
* gcc.dg/strlenopt-44.c: New test.
From-SVN: r263018
Marek Polacek [Thu, 26 Jul 2018 16:36:50 +0000 (16:36 +0000)]
* src/c++98/locale_init.cc: Fix #ifdef condition.
From-SVN: r263016
Jakub Jelinek [Thu, 26 Jul 2018 16:12:58 +0000 (18:12 +0200)]
re PR middle-end/86660 (libgomp.c++/for-15.C ICEs with nvptx offloading)
PR testsuite/86660
* testsuite/libgomp.c++/for-15.C (results): Include it in
omp declare target region.
(main): Use map (always, tofrom: results) instead of
map (tofrom: results).
From-SVN: r263011
Jakub Jelinek [Thu, 26 Jul 2018 16:12:02 +0000 (18:12 +0200)]
re PR middle-end/86660 (libgomp.c++/for-15.C ICEs with nvptx offloading)
PR middle-end/86660
* omp-low.c (scan_sharing_clauses): Don't ignore map clauses for
declare target to variables if they have always,{to,from,tofrom} map
kinds.
* testsuite/libgomp.c/pr86660.c: New test.
From-SVN: r263010
H.J. Lu [Thu, 26 Jul 2018 14:48:55 +0000 (14:48 +0000)]
libsanitizer: Mark REAL(swapcontext) with indirect_return attribute on x86
Cherry-pick compiler-rt revision 337603:
When shadow stack from Intel CET is enabled, the first instruction of all
indirect branch targets must be a special instruction, ENDBR.
lib/asan/asan_interceptors.cc has
...
int res = REAL(swapcontext)(oucp, ucp);
...
REAL(swapcontext) is a function pointer to swapcontext in libc. Since
swapcontext may return via indirect branch on x86 when shadow stack is
enabled, as in this case,
int res = REAL(swapcontext)(oucp, ucp);
^^^^^^^^^^^^^^^^^^^^^^^^^^^^ This function may be
returned via an indirect branch.
Here compiler must insert ENDBR after call, like
call *bar(%rip)
endbr64
I opened an LLVM bug:
https://bugs.llvm.org/show_bug.cgi?id=38207
to add the indirect_return attribute so that it can be used to inform
compiler to insert ENDBR after REAL(swapcontext) call. We mark
REAL(swapcontext) with the indirect_return attribute if it is available.
This fixed:
https://bugs.llvm.org/show_bug.cgi?id=38249
Reviewed By: eugenis
Differential Revision: https://reviews.llvm.org/D49608
PR target/86560
* asan/asan_interceptors.cc (swapcontext) Cherry-pick
compiler-rt revision 337603.
* sanitizer_common/sanitizer_internal_defs.h (__has_attribute):
Likewise.
From-SVN: r263009
Jonathan Wakely [Thu, 26 Jul 2018 14:03:28 +0000 (15:03 +0100)]
Add missing dg-require-cstdint directives to tests
* testsuite/18_support/aligned_alloc/aligned_alloc.cc: Add
dg-require-cstdint directive.
* testsuite/20_util/allocator/overaligned.cc: Likewise.
* testsuite/20_util/any/cons/aligned.cc: Likewise.
* testsuite/20_util/monotonic_buffer_resource/allocate.cc: Likewise.
* testsuite/20_util/monotonic_buffer_resource/deallocate.cc: Likewise.
* testsuite/20_util/shared_ptr/thread/default_weaktoshared.cc:
Likewise.
* testsuite/20_util/shared_ptr/thread/mutex_weaktoshared.cc: Likewise.
* testsuite/23_containers/list/modifiers/insert/25288.cc: Likewise.
* testsuite/23_containers/set/allocator/move_assign.cc: Likewise.
* testsuite/25_algorithms/make_heap/complexity.cc: Likewise.
* testsuite/25_algorithms/pop_heap/complexity.cc: Require cstdint and
random_device effective-target.
* testsuite/25_algorithms/push_heap/complexity.cc: Likewise.
* testsuite/25_algorithms/sample/1.cc: Require cstdint.
* testsuite/25_algorithms/sample/2.cc: Likewise.
* testsuite/25_algorithms/sort_heap/complexity.cc: Require cstdint
and random_device.
* testsuite/26_numerics/headers/random/types_std_c++0x.cc: Require
cstdint.
* testsuite/26_numerics/random/chi_squared_distribution/83833.cc:
Likewise.
* testsuite/26_numerics/random/discard_block_engine/requirements/
constexpr_data.cc: Likewise.
* testsuite/26_numerics/random/discard_block_engine/requirements/
constexpr_functions.cc: Likewise.
* testsuite/26_numerics/random/independent_bits_engine/requirements/
constexpr_functions.cc: Likewise.
* testsuite/26_numerics/random/linear_congruential_engine/requirements/
constexpr_data.cc: Likewise.
* testsuite/26_numerics/random/linear_congruential_engine/requirements/
constexpr_functions.cc: Likewise.
* testsuite/26_numerics/random/mersenne_twister_engine/requirements/
constexpr_data.cc: Likewise.
* testsuite/26_numerics/random/mersenne_twister_engine/requirements/
constexpr_functions.cc: Likewise.
* testsuite/26_numerics/random/pr60037-neg.cc: Likewise.
* testsuite/26_numerics/random/seed_seq/cons/65631.cc: Likewise.
* testsuite/26_numerics/random/shuffle_order_engine/requirements/
constexpr_data.cc: Add dg-require-cstdint directive.
* testsuite/26_numerics/random/shuffle_order_engine/requirements/
constexpr_functions.cc: Likewise.
* testsuite/26_numerics/random/subtract_with_carry_engine/requirements/
constexpr_data.cc: Likewise.
* testsuite/26_numerics/random/subtract_with_carry_engine/requirements/
constexpr_functions.cc: Likewise.
* testsuite/26_numerics/random/uniform_real_distribution/operators/
64351.cc: Likewise.
* testsuite/29_atomics/headers/atomic/types_std_c++0x.cc: Likewise.
* testsuite/experimental/algorithm/sample-2.cc: Likewise.
* testsuite/experimental/algorithm/sample.cc: Likewise.
* testsuite/experimental/algorithm/search.cc: Likewise.
* testsuite/experimental/algorithm/shuffle.cc: Likewise.
* testsuite/experimental/any/cons/aligned.cc: Likewise.
* testsuite/experimental/memory_resource/new_delete_resource.cc:
Likewise.
* testsuite/experimental/memory_resource/resource_adaptor.cc: Likewise.
* testsuite/experimental/random/randint.cc: Likewise.
* testsuite/experimental/source_location/1.cc: Likewise.
* testsuite/ext/bitmap_allocator/overaligned.cc: Likewise.
* testsuite/ext/malloc_allocator/overaligned.cc: Likewise.
* testsuite/ext/mt_allocator/overaligned.cc: Likewise.
* testsuite/ext/new_allocator/overaligned.cc: Likewise.
* testsuite/ext/pb_ds/regression/hash_map_rand.cc: Likewise.
* testsuite/ext/pb_ds/regression/hash_set_rand.cc: Likewise.
* testsuite/ext/pb_ds/regression/list_update_map_rand.cc: Likewise.
* testsuite/ext/pb_ds/regression/list_update_set_rand.cc: Likewise.
* testsuite/ext/pb_ds/regression/priority_queue_rand.cc: Likewise.
* testsuite/ext/pb_ds/regression/tree_map_rand.cc: Likewise.
* testsuite/ext/pb_ds/regression/tree_set_rand.cc: Likewise.
* testsuite/ext/pb_ds/regression/trie_map_rand.cc: Likewise.
* testsuite/ext/pb_ds/regression/trie_set_rand.cc: Likewise.
* testsuite/ext/pool_allocator/overaligned.cc: Likewise.
* testsuite/ext/throw_allocator/check_allocate_max_size.cc: Likewise.
* testsuite/ext/throw_allocator/check_deallocate_null.cc: Likewise.
* testsuite/ext/throw_allocator/check_delete.cc: Likewise.
* testsuite/ext/throw_allocator/check_new.cc: Likewise.
* testsuite/ext/throw_allocator/deallocate_global.cc: Likewise.
* testsuite/ext/throw_allocator/deallocate_local.cc: Likewise.
* testsuite/ext/throw_allocator/explicit_instantiation.cc: Likewise.
* testsuite/ext/throw_allocator/variadic_construct.cc: Likewise.
* testsuite/tr1/8_c_compatibility/cinttypes/functions.cc: Likewise.
From-SVN: r263008
Jonathan Wakely [Thu, 26 Jul 2018 14:03:01 +0000 (15:03 +0100)]
Remove dg-require-cstdint directive from tests
Tests for components which are no longer dependent on
_GLIBCXX_USE_C99_STDINT_TR1 do not need to require <cstdint>.
* testsuite/30_threads/recursive_mutex/cons/1.cc: Likewise.
* testsuite/30_threads/recursive_mutex/cons/assign_neg.cc: Likewise.
* testsuite/30_threads/recursive_mutex/cons/copy_neg.cc: Likewise.
* testsuite/30_threads/recursive_mutex/dest/destructor_locked.cc:
Likewise.
* testsuite/30_threads/recursive_mutex/lock/1.cc: Likewise.
* testsuite/30_threads/recursive_mutex/native_handle/1.cc: Likewise.
* testsuite/30_threads/recursive_mutex/native_handle/typesizes.cc:
Likewise.
* testsuite/30_threads/recursive_mutex/requirements/standard_layout.cc:
Likewise.
* testsuite/30_threads/recursive_mutex/requirements/typedefs.cc:
Likewise.
* testsuite/30_threads/recursive_mutex/try_lock/1.cc: Likewise.
* testsuite/30_threads/recursive_mutex/try_lock/2.cc: Likewise.
* testsuite/30_threads/recursive_mutex/unlock/1.cc: Likewise.
* testsuite/30_threads/recursive_mutex/unlock/2.cc: Likewise.
* testsuite/30_threads/recursive_timed_mutex/cons/1.cc: Likewise.
* testsuite/30_threads/recursive_timed_mutex/cons/assign_neg.cc:
Likewise.
* testsuite/30_threads/recursive_timed_mutex/cons/copy_neg.cc:
Likewise.
* testsuite/30_threads/recursive_timed_mutex/dest/
destructor_locked.cc: Likewise.
* testsuite/30_threads/recursive_timed_mutex/lock/1.cc: Likewise.
* testsuite/30_threads/recursive_timed_mutex/lock/2.cc: Likewise.
* testsuite/30_threads/recursive_timed_mutex/native_handle/1.cc:
Likewise.
* testsuite/30_threads/recursive_timed_mutex/native_handle/
typesizes.cc: Likewise.
* testsuite/30_threads/recursive_timed_mutex/requirements/typedefs.cc:
Likewise.
* testsuite/30_threads/recursive_timed_mutex/try_lock/1.cc:
Likewise.
* testsuite/30_threads/recursive_timed_mutex/try_lock/2.cc:
Likewise.
* testsuite/30_threads/recursive_timed_mutex/try_lock_for/1.cc:
Likewise.
* testsuite/30_threads/recursive_timed_mutex/try_lock_for/2.cc:
Likewise.
* testsuite/30_threads/recursive_timed_mutex/try_lock_for/3.cc:
Likewise.
* testsuite/30_threads/recursive_timed_mutex/try_lock_until/1.cc:
Likewise.
* testsuite/30_threads/recursive_timed_mutex/try_lock_until/2.cc:
Likewise.
* testsuite/30_threads/recursive_timed_mutex/unlock/1.cc: Likewise.
* testsuite/30_threads/recursive_timed_mutex/unlock/2.cc: Likewise.
* testsuite/30_threads/scoped_lock/cons/1.cc: Likewise.
* testsuite/30_threads/scoped_lock/requirements/
explicit_instantiation.cc: Likewise.
* testsuite/30_threads/scoped_lock/requirements/typedefs.cc: Likewise.
* testsuite/30_threads/shared_future/cons/assign.cc: Likewise.
* testsuite/30_threads/shared_future/cons/constexpr.cc: Likewise.
* testsuite/30_threads/shared_future/cons/copy.cc: Likewise.
* testsuite/30_threads/shared_future/cons/default.cc: Likewise.
* testsuite/30_threads/shared_future/cons/move.cc: Likewise.
* testsuite/30_threads/shared_future/cons/move_assign.cc: Likewise.
* testsuite/30_threads/shared_future/members/45133.cc: Likewise.
* testsuite/30_threads/shared_future/members/get.cc: Likewise.
* testsuite/30_threads/shared_future/members/get2.cc: Likewise.
* testsuite/30_threads/shared_future/members/valid.cc: Likewise.
* testsuite/30_threads/shared_future/members/wait.cc: Likewise.
* testsuite/30_threads/shared_future/members/wait_for.cc: Likewise.
* testsuite/30_threads/shared_future/members/wait_until.cc: Likewise.
* testsuite/30_threads/shared_future/requirements/
explicit_instantiation.cc: Likewise.
* testsuite/30_threads/shared_lock/cons/1.cc: Likewise.
* testsuite/30_threads/shared_lock/cons/2.cc: Likewise.
* testsuite/30_threads/shared_lock/cons/3.cc: Likewise.
* testsuite/30_threads/shared_lock/cons/4.cc: Likewise.
* testsuite/30_threads/shared_lock/cons/5.cc: Likewise.
* testsuite/30_threads/shared_lock/cons/6.cc: Likewise.
* testsuite/30_threads/shared_lock/locking/1.cc: Likewise.
* testsuite/30_threads/shared_lock/locking/2.cc: Likewise.
* testsuite/30_threads/shared_lock/locking/3.cc: Likewise.
* testsuite/30_threads/shared_lock/locking/4.cc: Likewise.
* testsuite/30_threads/shared_lock/modifiers/1.cc: Likewise.
* testsuite/30_threads/shared_lock/requirements/
explicit_instantiation.cc: Likewise.
* testsuite/30_threads/shared_lock/requirements/typedefs.cc: Likewise.
* testsuite/30_threads/shared_mutex/cons/1.cc: Likewise.
* testsuite/30_threads/shared_mutex/cons/assign_neg.cc: Likewise.
* testsuite/30_threads/shared_mutex/cons/copy_neg.cc: Likewise.
* testsuite/30_threads/shared_mutex/requirements/standard_layout.cc:
Likewise.
* testsuite/30_threads/shared_mutex/try_lock/1.cc: Likewise.
* testsuite/30_threads/shared_mutex/try_lock/2.cc: Likewise.
* testsuite/30_threads/shared_mutex/unlock/1.cc: Likewise.
* testsuite/30_threads/shared_timed_mutex/cons/1.cc: Likewise.
* testsuite/30_threads/shared_timed_mutex/cons/assign_neg.cc: Likewise.
* testsuite/30_threads/shared_timed_mutex/cons/copy_neg.cc: Likewise.
* testsuite/30_threads/shared_timed_mutex/requirements/
standard_layout.cc: Likewise.
* testsuite/30_threads/shared_timed_mutex/try_lock/1.cc: Likewise.
* testsuite/30_threads/shared_timed_mutex/try_lock/2.cc: Likewise.
* testsuite/30_threads/shared_timed_mutex/try_lock/3.cc: Likewise.
* testsuite/30_threads/shared_timed_mutex/unlock/1.cc: Likewise.
* testsuite/30_threads/this_thread/1.cc: Likewise.
* testsuite/30_threads/this_thread/2.cc: Likewise.
* testsuite/30_threads/this_thread/3.cc: Likewise.
* testsuite/30_threads/this_thread/4.cc: Likewise.
* testsuite/30_threads/this_thread/58038.cc: Likewise.
* testsuite/30_threads/thread/70503.cc: Likewise.
* testsuite/30_threads/thread/84532.cc: Likewise.
* testsuite/30_threads/thread/adl.cc: Likewise.
* testsuite/30_threads/thread/cons/1.cc: Likewise.
* testsuite/30_threads/thread/cons/2.cc: Likewise.
* testsuite/30_threads/thread/cons/3.cc: Likewise.
* testsuite/30_threads/thread/cons/4.cc: Likewise.
* testsuite/30_threads/thread/cons/49668.cc: Likewise.
* testsuite/30_threads/thread/cons/5.cc: Likewise.
* testsuite/30_threads/thread/cons/6.cc: Likewise.
* testsuite/30_threads/thread/cons/7.cc: Likewise.
* testsuite/30_threads/thread/cons/8.cc: Likewise.
* testsuite/30_threads/thread/cons/84535.cc: Likewise.
* testsuite/30_threads/thread/cons/9.cc: Likewise.
* testsuite/30_threads/thread/cons/assign_neg.cc: Likewise.
* testsuite/30_threads/thread/cons/copy_neg.cc: Likewise.
* testsuite/30_threads/thread/cons/lwg2097.cc: Likewise.
* testsuite/30_threads/thread/cons/moveable.cc: Likewise.
* testsuite/30_threads/thread/cons/terminate.cc: Likewise.
* testsuite/30_threads/thread/id/operators.cc: Likewise.
* testsuite/30_threads/thread/members/1.cc: Likewise.
* testsuite/30_threads/thread/members/2.cc: Likewise.
* testsuite/30_threads/thread/members/3.cc: Likewise.
* testsuite/30_threads/thread/members/4.cc: Likewise.
* testsuite/30_threads/thread/members/5.cc: Likewise.
* testsuite/30_threads/thread/members/hardware_concurrency.cc:
Likewise.
* testsuite/30_threads/thread/native_handle/cancel.cc: Likewise.
* testsuite/30_threads/thread/swap/1.cc: Likewise.
* testsuite/30_threads/timed_mutex/cons/1.cc: Likewise.
* testsuite/30_threads/timed_mutex/cons/assign_neg.cc: Likewise.
* testsuite/30_threads/timed_mutex/cons/copy_neg.cc: Likewise.
* testsuite/30_threads/timed_mutex/dest/destructor_locked.cc: Likewise.
* testsuite/30_threads/timed_mutex/lock/1.cc: Likewise.
* testsuite/30_threads/timed_mutex/native_handle/1.cc: Likewise.
* testsuite/30_threads/timed_mutex/native_handle/typesizes.cc:
Likewise.
* testsuite/30_threads/timed_mutex/requirements/
standard_layout.cc: Likewise.
* testsuite/30_threads/timed_mutex/requirements/typedefs.cc: Likewise.
* testsuite/30_threads/timed_mutex/try_lock/1.cc: Likewise.
* testsuite/30_threads/timed_mutex/try_lock/2.cc: Likewise.
* testsuite/30_threads/timed_mutex/try_lock_for/1.cc: Likewise.
* testsuite/30_threads/timed_mutex/try_lock_for/2.cc: Likewise.
* testsuite/30_threads/timed_mutex/try_lock_for/3.cc: Likewise.
* testsuite/30_threads/timed_mutex/try_lock_until/1.cc: Likewise.
* testsuite/30_threads/timed_mutex/try_lock_until/2.cc: Likewise.
* testsuite/30_threads/timed_mutex/try_lock_until/57641.cc: Likewise.
* testsuite/30_threads/timed_mutex/unlock/1.cc: Likewise.
* testsuite/30_threads/timed_mutex/unlock/2.cc: Likewise.
* testsuite/30_threads/try_lock/1.cc: Likewise.
* testsuite/30_threads/try_lock/2.cc: Likewise.
* testsuite/30_threads/try_lock/3.cc: Likewise.
* testsuite/30_threads/try_lock/4.cc: Likewise.
* testsuite/30_threads/unique_lock/cons/1.cc: Likewise.
* testsuite/30_threads/unique_lock/cons/2.cc: Likewise.
* testsuite/30_threads/unique_lock/cons/3.cc: Likewise.
* testsuite/30_threads/unique_lock/cons/4.cc: Likewise.
* testsuite/30_threads/unique_lock/cons/5.cc: Likewise.
* testsuite/30_threads/unique_lock/cons/6.cc: Likewise.
* testsuite/30_threads/unique_lock/locking/1.cc: Likewise.
* testsuite/30_threads/unique_lock/locking/2.cc: Likewise.
* testsuite/30_threads/unique_lock/locking/3.cc: Likewise.
* testsuite/30_threads/unique_lock/locking/4.cc: Likewise.
* testsuite/30_threads/unique_lock/modifiers/1.cc: Likewise.
* testsuite/30_threads/unique_lock/requirements/
explicit_instantiation.cc: Likewise.
* testsuite/30_threads/unique_lock/requirements/typedefs.cc: Likewise.
From-SVN: r263007
Jonathan Wakely [Thu, 26 Jul 2018 14:02:42 +0000 (15:02 +0100)]
Remove dg-require-cstdint directive from tests
Tests for components which are no longer dependent on
_GLIBCXX_USE_C99_STDINT_TR1 do not need to require <cstdint>.
* testsuite/30_threads/async/42819.cc: Remove dg-require-cstdint
directive.
* testsuite/30_threads/async/49668.cc: Likewise.
* testsuite/30_threads/async/54297.cc: Likewise.
* testsuite/30_threads/async/84532.cc: Likewise.
* testsuite/30_threads/async/any.cc: Likewise.
* testsuite/30_threads/async/async.cc: Likewise.
* testsuite/30_threads/async/except.cc: Likewise.
* testsuite/30_threads/async/forced_unwind.cc: Likewise.
* testsuite/30_threads/async/launch.cc: Likewise.
* testsuite/30_threads/async/lwg2021.cc: Likewise.
* testsuite/30_threads/async/sync.cc: Likewise.
* testsuite/30_threads/call_once/39909.cc: Likewise.
* testsuite/30_threads/call_once/49668.cc: Likewise.
* testsuite/30_threads/call_once/60497.cc: Likewise.
* testsuite/30_threads/call_once/call_once1.cc: Likewise.
* testsuite/30_threads/call_once/constexpr.cc: Likewise.
* testsuite/30_threads/call_once/dr2442.cc: Likewise.
* testsuite/30_threads/call_once/once_flag.cc: Likewise.
* testsuite/30_threads/condition_variable/54185.cc: Likewise.
* testsuite/30_threads/condition_variable/cons/1.cc: Likewise.
* testsuite/30_threads/condition_variable/cons/assign_neg.cc:
Likewise.
* testsuite/30_threads/condition_variable/cons/copy_neg.cc: Likewise.
* testsuite/30_threads/condition_variable/members/1.cc: Likewise.
* testsuite/30_threads/condition_variable/members/2.cc: Likewise.
* testsuite/30_threads/condition_variable/members/3.cc: Likewise.
* testsuite/30_threads/condition_variable/members/53841.cc: Likewise.
* testsuite/30_threads/condition_variable/members/68519.cc: Likewise.
* testsuite/30_threads/condition_variable/native_handle/typesizes.cc:
Likewise.
* testsuite/30_threads/condition_variable/requirements/
standard_layout.cc: Likewise.
* testsuite/30_threads/condition_variable/requirements/typedefs.cc:
* Likewise.
* testsuite/30_threads/condition_variable_any/50862.cc: Likewise.
* testsuite/30_threads/condition_variable_any/53830.cc: Likewise.
* testsuite/30_threads/condition_variable_any/cons/1.cc: Likewise.
* testsuite/30_threads/condition_variable_any/cons/assign_neg.cc:
Likewise.
* testsuite/30_threads/condition_variable_any/cons/copy_neg.cc:
Likewise.
* testsuite/30_threads/condition_variable_any/members/1.cc: Likewise.
* testsuite/30_threads/condition_variable_any/members/2.cc: Likewise.
* testsuite/30_threads/future/cons/assign_neg.cc: Likewise.
* testsuite/30_threads/future/cons/constexpr.cc: Likewise.
* testsuite/30_threads/future/cons/copy_neg.cc: Likewise.
* testsuite/30_threads/future/cons/default.cc: Likewise.
* testsuite/30_threads/future/cons/move.cc: Likewise.
* testsuite/30_threads/future/cons/move_assign.cc: Likewise.
* testsuite/30_threads/future/members/45133.cc: Likewise.
* testsuite/30_threads/future/members/get.cc: Likewise.
* testsuite/30_threads/future/members/get2.cc: Likewise.
* testsuite/30_threads/future/members/share.cc: Likewise.
* testsuite/30_threads/future/members/valid.cc: Likewise.
* testsuite/30_threads/future/members/wait.cc: Likewise.
* testsuite/30_threads/future/members/wait_for.cc: Likewise.
* testsuite/30_threads/future/members/wait_until.cc: Likewise.
* testsuite/30_threads/future/requirements/explicit_instantiation.cc:
Likewise.
* testsuite/30_threads/headers/condition_variable/types_std_c++0x.cc:
Likewise.
* testsuite/30_threads/headers/future/types_std_c++0x.cc: Likewise.
* testsuite/30_threads/headers/mutex/types_std_c++0x.cc: Likewise.
* testsuite/30_threads/headers/thread/std_c++0x_neg.cc: Likewise.
* testsuite/30_threads/headers/thread/types_std_c++0x.cc: Likewise.
* testsuite/30_threads/lock/1.cc: Likewise.
* testsuite/30_threads/lock/2.cc: Likewise.
* testsuite/30_threads/lock/3.cc: Likewise.
* testsuite/30_threads/lock/4.cc: Likewise.
* testsuite/30_threads/lock_guard/cons/1.cc: Likewise.
* testsuite/30_threads/lock_guard/requirements/
explicit_instantiation.cc: Likewise.
* testsuite/30_threads/lock_guard/requirements/typedefs.cc: Likewise.
* testsuite/30_threads/mutex/cons/1.cc: Likewise.
* testsuite/30_threads/mutex/cons/assign_neg.cc: Likewise.
* testsuite/30_threads/mutex/cons/constexpr.cc: Likewise.
* testsuite/30_threads/mutex/cons/copy_neg.cc: Likewise.
* testsuite/30_threads/mutex/dest/destructor_locked.cc: Likewise.
* testsuite/30_threads/mutex/lock/1.cc: Likewise.
* testsuite/30_threads/mutex/native_handle/1.cc: Likewise.
* testsuite/30_threads/mutex/native_handle/typesizes.cc: Likewise.
* testsuite/30_threads/mutex/requirements/standard_layout.cc::
Likewise.
* testsuite/30_threads/mutex/requirements/typedefs.cc: Likewise.
* testsuite/30_threads/mutex/try_lock/1.cc: Likewise.
* testsuite/30_threads/mutex/try_lock/2.cc: Likewise.
* testsuite/30_threads/mutex/unlock/1.cc: Likewise.
* testsuite/30_threads/mutex/unlock/2.cc: Likewise.
* testsuite/30_threads/once_flag/cons/constexpr.cc: Likewise.
* testsuite/30_threads/packaged_task/49668.cc: Likewise.
* testsuite/30_threads/packaged_task/60564.cc: Likewise.
* testsuite/30_threads/packaged_task/cons/1.cc: Likewise.
* testsuite/30_threads/packaged_task/cons/2.cc: Likewise.
* testsuite/30_threads/packaged_task/cons/3.cc: Likewise.
* testsuite/30_threads/packaged_task/cons/56492.cc: Likewise.
* testsuite/30_threads/packaged_task/cons/alloc.cc: Likewise.
* testsuite/30_threads/packaged_task/cons/alloc2.cc: Likewise.
* testsuite/30_threads/packaged_task/cons/alloc_min.cc: Likewise.
* testsuite/30_threads/packaged_task/cons/assign_neg.cc: Likewise.
* testsuite/30_threads/packaged_task/cons/copy_neg.cc: Likewise.
* testsuite/30_threads/packaged_task/cons/move.cc: Likewise.
* testsuite/30_threads/packaged_task/cons/move_assign.cc: Likewise.
* testsuite/30_threads/packaged_task/members/at_thread_exit.cc:
Likewise.
* testsuite/30_threads/packaged_task/members/get_future.cc: Likewise.
* testsuite/30_threads/packaged_task/members/get_future2.cc: Likewise.
* testsuite/30_threads/packaged_task/members/invoke.cc: Likewise.
* testsuite/30_threads/packaged_task/members/invoke2.cc: Likewise.
* testsuite/30_threads/packaged_task/members/invoke3.cc: Likewise.
* testsuite/30_threads/packaged_task/members/invoke4.cc: Likewise.
* testsuite/30_threads/packaged_task/members/invoke5.cc: Likewise.
* testsuite/30_threads/packaged_task/members/reset.cc: Likewise.
* testsuite/30_threads/packaged_task/members/reset2.cc: Likewise.
* testsuite/30_threads/packaged_task/members/swap.cc: Likewise.
* testsuite/30_threads/packaged_task/members/valid.cc: Likewise.
* testsuite/30_threads/packaged_task/requirements/
explicit_instantiation.cc: Likewise.
* testsuite/30_threads/packaged_task/uses_allocator.cc: Likewise.
* testsuite/30_threads/promise/60966.cc: Likewise.
* testsuite/30_threads/promise/69106.cc: Likewise.
* testsuite/30_threads/promise/cons/1.cc: Likewise.
* testsuite/30_threads/promise/cons/alloc.cc: Likewise.
* testsuite/30_threads/promise/cons/alloc2.cc: Likewise.
* testsuite/30_threads/promise/cons/alloc_min.cc: Likewise.
* testsuite/30_threads/promise/cons/assign_neg.cc: Likewise.
* testsuite/30_threads/promise/cons/copy_neg.cc: Likewise.
* testsuite/30_threads/promise/cons/move.cc: Likewise.
* testsuite/30_threads/promise/cons/move_assign.cc: Likewise.
* testsuite/30_threads/promise/members/at_thread_exit.cc: Likewise.
* testsuite/30_threads/promise/members/at_thread_exit2.cc: Likewise.
* testsuite/30_threads/promise/members/get_future.cc: Likewise.
* testsuite/30_threads/promise/members/get_future2.cc: Likewise.
* testsuite/30_threads/promise/members/set_exception.cc: Likewise.
* testsuite/30_threads/promise/members/set_exception2.cc: Likewise.
* testsuite/30_threads/promise/members/set_value.cc: Likewise.
* testsuite/30_threads/promise/members/set_value2.cc: Likewise.
* testsuite/30_threads/promise/members/set_value3.cc: Likewise.
* testsuite/30_threads/promise/members/swap.cc: Likewise.
* testsuite/30_threads/promise/requirements/explicit_instantiation.cc:
* Likewise.
* testsuite/30_threads/promise/uses_allocator.cc: Likewise.
From-SVN: r263006
Jonathan Wakely [Thu, 26 Jul 2018 14:02:26 +0000 (15:02 +0100)]
Remove dg-require-cstdint directive from tests
Tests for components which are no longer dependent on
_GLIBCXX_USE_C99_STDINT_TR1 do not need to require <cstdint>.
* testsuite/18_support/numeric_limits/char16_32_t.cc: Qualify names
from namespace std.
* testsuite/20_util/align/2.cc: Remove dg-require-cstdint directive.
* testsuite/20_util/duration/arithmetic/1.cc: Likewise.
* testsuite/20_util/duration/arithmetic/2.cc: Likewise.
* testsuite/20_util/duration/arithmetic/dr2020.cc: Likewise.
* testsuite/20_util/duration/arithmetic/dr934-1.cc: Likewise.
* testsuite/20_util/duration/arithmetic/dr934-2.cc: Likewise.
* testsuite/20_util/duration/comparison_operators/1.cc: Likewise.
* testsuite/20_util/duration/cons/1.cc: Likewise.
* testsuite/20_util/duration/cons/1_neg.cc: Likewise.
* testsuite/20_util/duration/cons/2.cc: Likewise.
* testsuite/20_util/duration/cons/54025.cc: Likewise.
* testsuite/20_util/duration/cons/dr974_neg.cc: Likewise.
* testsuite/20_util/duration/requirements/explicit_instantiation/
explicit_instantiation.cc: Likewise.
* testsuite/20_util/duration/requirements/typedefs_neg1.cc: Likewise.
* testsuite/20_util/duration/requirements/typedefs_neg2.cc: Likewise.
* testsuite/20_util/duration/requirements/typedefs_neg3.cc: Likewise.
* testsuite/20_util/make_signed/requirements/typedefs-4.cc: Likewise.
* testsuite/20_util/ratio/comparisons/comp1.cc: Likewise.
* testsuite/20_util/ratio/comparisons/comp2.cc: Likewise.
* testsuite/20_util/ratio/comparisons/comp3.cc: Likewise.
* testsuite/20_util/ratio/cons/cons1.cc: Likewise.
* testsuite/20_util/ratio/operations/45866.cc: Likewise.
* testsuite/20_util/ratio/operations/47913.cc: Likewise.
* testsuite/20_util/ratio/operations/53840.cc: Likewise.
* testsuite/20_util/ratio/operations/ops1.cc: Likewise.
* testsuite/20_util/shared_ptr/atomic/3.cc: Likewise.
* testsuite/20_util/system_clock/1.cc: Likewise.
* testsuite/20_util/time_point/1.cc: Likewise.
* testsuite/20_util/time_point/2.cc: Likewise.
* testsuite/20_util/time_point/3.cc: Likewise.
* testsuite/20_util/time_point/requirements/explicit_instantiation/
explicit_instantiation.cc: Likewise.
* testsuite/21_strings/basic_string/requirements/
explicit_instantiation/char16_t/1.cc: Likewise.
* testsuite/21_strings/basic_string/requirements/
explicit_instantiation/char32_t/1.cc: Likewise.
* testsuite/21_strings/basic_string_view/requirements/
explicit_instantiation/char16_t/1.cc: Likewise.
* testsuite/21_strings/basic_string_view/requirements/
explicit_instantiation/char32_t/1.cc: Likewise.
* testsuite/21_strings/char_traits/requirements/
explicit_instantiation/char16_t/1.cc: Likewise.
* testsuite/21_strings/char_traits/requirements/
explicit_instantiation/char32_t/1.cc: Likewise.
* testsuite/21_strings/headers/string/types_std_c++0x.cc: Likewise.
* testsuite/22_locale/codecvt/char16_t.cc: Likewise.
* testsuite/22_locale/codecvt/char32_t.cc: Likewise.
* testsuite/22_locale/codecvt/codecvt_utf16/requirements/1.cc:
Likewise.
* testsuite/22_locale/codecvt/codecvt_utf8/requirements/1.cc:
Likewise.
* testsuite/22_locale/codecvt/codecvt_utf8_utf16/requirements/1.cc:
Likewise.
* testsuite/22_locale/codecvt/utf8.cc: Likewise.
* testsuite/23_containers/vector/bool/72847.cc: Likewise.
* testsuite/23_containers/vector/debug/multithreaded_swap.cc:
Likewise.
* testsuite/experimental/string_view/requirements/
explicit_instantiation/char16_t/1.cc: Likewise.
* testsuite/experimental/string_view/requirements/
explicit_instantiation/char32_t/1.cc: Likewise.
* testsuite/ext/vstring/requirements/explicit_instantiation/char16_t/
1.cc: Likewise.
* testsuite/ext/vstring/requirements/explicit_instantiation/char32_t/
1.cc: Likewise.
From-SVN: r263005
Jonathan Wakely [Thu, 26 Jul 2018 14:02:11 +0000 (15:02 +0100)]
Add missing checks for _GLIBCXX_USE_C99_STDINT_TR1
The throw_allocator extension depends on <tr1/random> which depends on
_GLIBCXX_USE_C99_STDINT_TR1.
The Transactional Memory support uses fixed-width integer types from
<stdint.h>.
* include/ext/throw_allocator.h [!_GLIBCXX_USE_C99_STDINT_TR1]
(random_condition, throw_value_random, throw_allocator_random)
(std::hash<throw_value_random>): Do not define when <tr1/random> is
not usable.
* src/c++11/cow-stdexcept.cc [!_GLIBCXX_USE_C99_STDINT_TR1]: Do not
define transactional memory support when <stdint.h> is not usable.
From-SVN: r263004
Jonathan Wakely [Thu, 26 Jul 2018 14:02:05 +0000 (15:02 +0100)]
Modify some library internals to work without <stdint.h>
std::__detail::__clp2 used uint_fast32_t and uint_fast64_t without
checking _GLIBCXX_USE_C99_STDINT_TR1 which was a potential bug. A
simpler implementation based on the new std::__ceil2 code performs
better and doesn't depend on <stdint.h> types.
std::align and other C++11 functions in <memory> where unnecessarily
missing when _GLIBCXX_USE_C99_STDINT_TR1 was not defined.
* include/bits/hashtable_policy.h (__detail::__clp2): Use faster
implementation that doesn't depend on <stdint.h> types.
* include/std/memory (align) [!_GLIBCXX_USE_C99_STDINT_TR1]: Use
std::size_t when std::uintptr_t is not usable.
[!_GLIBCXX_USE_C99_STDINT_TR1] (pointer_safety, declare_reachable)
(undeclare_reachable, declare_no_pointers, undeclare_no_pointers):
Define independent of _GLIBCXX_USE_C99_STDINT_TR1.
From-SVN: r263003
Jonathan Wakely [Thu, 26 Jul 2018 14:02:01 +0000 (15:02 +0100)]
Remove char16_t and char32_t dependency on <stdint.h>
The char16_t and char32_t types are automatically defined by the
compiler and do not depend on support in <stdint.h>. The char_traits
specializations depend on uint_leastNN_t but can be made to work anyway
by using the predefined macros, or as a last resort make_unsigned.
* include/bits/basic_string.h [!_GLIBCXX_USE_C99_STDINT_TR1]
(hash<u16string>, hash<u32string>): Remove dependency on
_GLIBCXX_USE_C99_STDINT_TR1.
* include/bits/char_traits.h [!_GLIBCXX_USE_C99_STDINT_TR1]
(char_traits<char16_t>, char_traits<char32_t>): Remove dependency on
_GLIBCXX_USE_C99_STDINT_TR1. Use __UINT_LEAST16_TYPE__ and
__UINT_LEAST32_TYPE__ or make_unsigned when <stdint.h> is not usable.
* include/bits/codecvt.h [!_GLIBCXX_USE_C99_STDINT_TR1]
(codecvt<char16_t, char, mbstate_t>)
(codecvt<char32_t, char, mbstate_t>)
(codecvt_byname<char16_t, char, mbstate_t>)
(codecvt_byname<char32_t, char, mbstate_t>): Remove dependency
on _GLIBCXX_USE_C99_STDINT_TR1.
* include/bits/locale_facets.h [!_GLIBCXX_USE_C99_STDINT_TR1]
(_GLIBCXX_NUM_UNICODE_FACETS): Likewise.
* include/bits/stringfwd.h [!_GLIBCXX_USE_C99_STDINT_TR1]
(char_traits<char16_t>, char_traits<char32_t>)
(basic_string<char16_t>, basic_string<char32_t>): Remove dependency
on _GLIBCXX_USE_C99_STDINT_TR1.
* include/experimental/string_view [!_GLIBCXX_USE_C99_STDINT_TR1]
(u16string_view, u32string_view, hash<u16string_view>)
(hash<u32string_view>, operator""sv(const char16_t, size_t))
(operator""sv(const char32_t, size_t)): Likewise.
* include/ext/vstring.h [!_GLIBCXX_USE_C99_STDINT_TR1]
(hash<__u16vstring>, hash<__u32vstring>): Likewise.
* include/ext/vstring_fwd.h [!_GLIBCXX_USE_C99_STDINT_TR1]
(__u16vstring, __u16sso_string, __u16rc_string, __u32vstring)
(__u32sso_string, __u32rc_string): Likewise.
* include/std/codecvt [!_GLIBCXX_USE_C99_STDINT_TR1] (codecvt_mode)
(codecvt_utf8, codecvt_utf16, codecvt_utf8_utf16): Likewise.
* include/std/string_view [!_GLIBCXX_USE_C99_STDINT_TR1]
(u16string_view, u32string_view, hash<u16string_view>)
(hash<u32string_view>, operator""sv(const char16_t, size_t))
(operator""sv(const char32_t, size_t)): Likewise.
* src/c++11/codecvt.cc: Likewise.
* src/c++98/locale_init.cc: Likewise.
* src/c++98/localename.cc: Likewise.
From-SVN: r263002
Jonathan Wakely [Thu, 26 Jul 2018 14:01:55 +0000 (15:01 +0100)]
Remove <chrono> dependency on _GLIBCXX_USE_C99_STDINT_TR1
By adding fallback definitions of std::intmax_t and std::uintmax_t it's
possible to define <ratio> without _GLIBCXX_USE_C99_STDINT_TR1. This in
turn allows most of <chrono> to be defined, which removes the dependency
on _GLIBCXX_USE_C99_STDINT_TR1 for all of the C++11 concurrency features.
The compiler defines __INTMAX_TYPE__ and __UINTMAX_TYPE__
unconditionally so it should be safe to rely on them.
* include/bits/atomic_futex.h [!_GLIBCXX_USE_C99_STDINT_TR1]
(__atomic_futex_unsigned_base): Remove dependency on
_GLIBCXX_USE_C99_STDINT_TR1 macro.
* include/bits/unique_lock.h [!_GLIBCXX_USE_C99_STDINT_TR1]
(unique_lock): Remove dependency on _GLIBCXX_USE_C99_STDINT_TR1.
* include/c_global/cstdint [!_GLIBCXX_USE_C99_STDINT_TR1] (intmax_t)
(uintmax_t): Define using predefined macros.
* include/std/chrono [!_GLIBCXX_USE_C99_STDINT_TR1] (duration)
(time_point, system_clock, high_resolution_clock, steady_clock): Remove
dependency on _GLIBCXX_USE_C99_STDINT_TR1 macro.
(nanoseconds, microseconds, milliseconds, seconds, minutes, hours):
[!_GLIBCXX_USE_C99_STDINT_TR1]: Define using __INT64_TYPE__ or
long long when <stdint.h> is not usable.
* include/std/condition_variable [!_GLIBCXX_USE_C99_STDINT_TR1]
(condition_variable, condition_variable_any): Remove dependency on
_GLIBCXX_USE_C99_STDINT_TR1.
* include/std/future [!_GLIBCXX_USE_C99_STDINT_TR1] (future, promise)
(packaged_task, async): Likewise.
* include/std/mutex [!_GLIBCXX_USE_C99_STDINT_TR1] (recursive_mutex)
(timed_mutex, recursive_timed_mutex, try_lock, lock, scoped_lock)
(once_flag, call_once): Likewise.
* include/std/ratio [!_GLIBCXX_USE_C99_STDINT_TR1] (ratio): Likewise.
* include/std/shared_mutex [!_GLIBCXX_USE_C99_STDINT_TR1]
(shared_mutex, shared_timed_mutex, shared_lock): Likewise.
* include/std/thread [!_GLIBCXX_USE_C99_STDINT_TR1] (thread)
(this_thread::get_id, this_thread::yield, this_thread::sleep_for)
(this_thread::sleep_until): Likewise.
* src/c++11/chrono.cc: Remove dependency on
_GLIBCXX_USE_C99_STDINT_TR1 macro.
* src/c++11/condition_variable.cc: Likewise.
* src/c++11/futex.cc: Likewise.
* src/c++11/future.cc: Likewise.
* src/c++11/mutex.cc: Likewise.
* src/c++11/thread.cc: Likewise.
* testsuite/20_util/duration/literals/range_neg.cc: Adjust dg-error.
* testsuite/20_util/duration/requirements/typedefs_neg1.cc: Likewise.
* testsuite/20_util/duration/requirements/typedefs_neg2.cc: Likewise.
* testsuite/20_util/duration/requirements/typedefs_neg3.cc: Likewise.
* testsuite/20_util/ratio/cons/cons_overflow_neg.cc: Likewise.
* testsuite/20_util/ratio/operations/ops_overflow_neg.cc: Likewise.
From-SVN: r263001
Rainer Orth [Thu, 26 Jul 2018 12:36:21 +0000 (12:36 +0000)]
xfail experimental/memory_resource/new_delete_resource.cc on 32-bit Solaris/x86 (PR libstdc++/77691)
PR libstdc++/77691
* testsuite/experimental/memory_resource/new_delete_resource.cc:
xfail execution on 32-bit Solaris/x86.
From-SVN: r263000
Martin Liska [Thu, 26 Jul 2018 12:13:14 +0000 (14:13 +0200)]
Add linker_output as prefix for LTO temps (PR lto/86548).
2018-07-26 Martin Liska <mliska@suse.cz>
PR lto/86548
* lto-wrapper.c: Add linker_output as prefix
for ltrans_output_file.
2018-07-26 Martin Liska <mliska@suse.cz>
PR lto/86548
* libiberty.h (make_temp_file_with_prefix): New function.
2018-07-26 Martin Liska <mliska@suse.cz>
PR lto/86548
* make-temp-file.c (TEMP_FILE): Remove leading 'cc'.
(make_temp_file): Call make_temp_file_with_prefix with
first argument set to NULL.
(make_temp_file_with_prefix): Support also prefix.
From-SVN: r262999
Marc Glisse [Thu, 26 Jul 2018 12:01:14 +0000 (14:01 +0200)]
optimize std::vector move assignment
2018-07-26 Marc Glisse <marc.glisse@inria.fr>
* include/bits/stl_vector.h (_Vector_impl_data::_M_copy_data): New.
(_Vector_impl_data::_M_swap_data): Use _M_copy_data.
(vector::_M_move_assign): Reorder the swaps.
From-SVN: r262998
projects / gcc.git / log