Nick Clifton [Mon, 7 Dec 2015 10:19:19 +0000 (10:19 +0000)]
Add support for MSP430 F5 hardware multiply.
* msp430-sim.c (sim_open): Check for needed memory at address
0x500 not 0x200.
(get_op): Add support for F5 hardware multiply addresses.
(put_op): Likewise.
Alan Modra [Mon, 7 Dec 2015 03:22:01 +0000 (13:52 +1030)]
PowerPC ifunc with local symbols
This fixes some cases where the linker would incorrectly error on plt
relocs to local ifunc symbols. I've also tidied plt and ifunc
handling for ppc64, where check_relocs was allowing for the
possibility of plt calls via addr14/addr24 relocs but relocate_section
was not.
* elf32-ppc.c (ppc_elf_check_relocs): Don't error on local ifunc
plt call. Wrap long lines.
(ppc_elf_relocate_section): Wrap long lines.
* elf64-ppc.c (ppc64_elf_check_relocs): Don't error on local ifunc
plt calls. Move __tls_get_addr checks later. Don't create plt
for addr14/addr24 relocs.
(ppc64_elf_gc_sweep_hook): Adjust to suit check_relocs changes.
(ppc64_elf_relocate_section): Correct local ifunc handling for
PLT64, PLT32 and PLT16 relocs.
Alan Modra [Mon, 7 Dec 2015 03:11:36 +0000 (13:41 +1030)]
PR19323 memory allocation greater than 4G
On 32-bit targets, memory requested for program/section headers on a
fuzzed binary can wrap to 0. A bfd_alloc of zero bytes actually
returns a one byte allocation rather than a NULL pointer. This then
leads to buffer overflows.
Making this check unconditional triggers an extremely annoying gcc-5
warning.
PR19323
* elfcode.h (elf_object_p): Check for ridiculous e_shnum and
e_phnum values.
Alan Modra [Mon, 7 Dec 2015 02:45:24 +0000 (13:15 +1030)]
[GOLD] R_PPC64_ENTRY support
elfcpp/
* powerpc.h (R_PPC64_ENTRY): Define.
gold/
* powerpc.cc (add_2_2_12, ld_2_12, lis_2): Define.
(Target_powerpc::Scan::local, global): Handle R_PPC64_ENTRY.
(Target_powerpc::Relocate::relocate): Edit code at R_PPC64_ENTRY.
Alan Modra [Mon, 7 Dec 2015 02:44:53 +0000 (13:14 +1030)]
R_PPC64_ENTRY
Add a new relocation that marks large-model entry code, for edit back
to medium-model.
include/elf/
* ppc64.h (R_PPC64_ENTRY): Define.
bfd/
* reloc.c (BFD_RELOC_PPC64_ENTRY): New.
* elf64-ppc.c (reloc_howto_type ppc64_elf_howto_raw): Add
entry for R_PPC64_ENTRY.
(LD_R2_0R12, ADD_R2_R2_R12, LIS_R2, ADDIS_R2_R12): Define.
(ppc64_elf_reloc_type_lookup): Handle R_PPC64_ENTRY.
(ppc64_elf_relocate_section): Edit code at R_PPC64_ENTTY. Use
new insn defines.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
Alan Modra [Mon, 7 Dec 2015 02:44:35 +0000 (13:14 +1030)]
tc-ppc.c md_apply_fix tidy
* config/tc-ppc.c (md_apply_fix): Localize variables. Reduce casts.
Alan Modra [Mon, 7 Dec 2015 02:44:05 +0000 (13:14 +1030)]
Reorder some power9 insns
The idea being to put instructions that have the same encoding adjacent
to each other.
* opcodes/ppc-opc.c (powerpc_opcodes): Sort power9 insns by
major opcode/xop.
Kaz Kojima [Mon, 7 Dec 2015 00:58:37 +0000 (09:58 +0900)]
bfd: Mark sh5*-*-* and sh64*-*-* targets as obsolete.
GDB Administrator [Mon, 7 Dec 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Joel Brobecker [Sun, 6 Dec 2015 17:38:24 +0000 (18:38 +0100)]
Replace remaining references to i386-nat with x86-nat instead.
i386-nat.[hc] got renamed to x86-nat.[hc] a while back, but somehow
3 references to the old file name remained past the renaming. This
fixes all of them.
gdb/ChangeLog (with Mike Stump <mikestump@comcast.net>):
* Makefile.in (TAGS): Replace i386-nat.h by x86-nat.h.
* x86-nat.c: Replace remaining references to i386-nat
by reference to x86-nat instead.
GDB Administrator [Sun, 6 Dec 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Joel Brobecker [Sat, 5 Dec 2015 15:29:09 +0000 (16:29 +0100)]
Document the GDB 7.10.1 release in gdb/ChangeLog
gdb/ChangeLog:
GDB 7.10.1 released.
Josh Stone [Fri, 4 Dec 2015 21:28:07 +0000 (13:28 -0800)]
gdbserver: set ptrace flags after creating inferiors
Rename target_ops.arch_setup to .post_create_inferior. In the Linux
hook, continue calling the low arch setup, then also set ptrace flags.
This corrects the possibility of running without flags, demonstrated by
a new test that would fail to catch a fork before.
gdb/gdbserver/ChangeLog:
2015-12-04 Josh Stone <jistone@redhat.com>
* target.h (struct target_ops) <arch_setup>: Rename to ...
(struct target_ops) <post_create_inferior>: ... this.
(target_arch_setup): Rename to ...
(target_post_create_inferior): ... this, calling post_create_inferior.
* server.c (start_inferior): Update target_arch_setup calls to
target_post_create_inferior.
* linux-low.c (linux_low_ptrace_options): Forward declare.
(linux_arch_setup): Update its comment for general use.
(linux_post_create_inferior): New, run arch_setup and setup ptrace.
(struct linux_target_ops): Use linux_post_create_inferior.
* lynx-low.c (struct lynx_target_ops): Update arch_setup stub comment
to post_create_inferior.
* nto-low.c (struct nto_target_ops): Likewise.
* spu-low.c (struct spu_target_ops): Likewise.
* win32-low.c (struct win32_target_ops): Likewise.
gdb/testsuite/ChangeLog:
2015-12-04 Josh Stone <jistone@redhat.com>
* gdb.base/catch-fork-static.exp: New.
GDB Administrator [Sat, 5 Dec 2015 00:00:07 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Fri, 4 Dec 2015 16:43:45 +0000 (08:43 -0800)]
Optimize R_386_GOT32/R_386_GOT32X only if addend is 0
Linker can't optimize R_386_GOT32 and R_386_GOT32X relocations if addend
isn't 0. It isn't valid to convert
movl foo@GOT+1(%ecx), %eax
to
leal foo@GOTOFF+1(%ecx), %eax
nor to convert
movq foo@GOTPCREL+1(%rip), %rax
to
leaq foo(%rip), %rax
for x86-64. We should check if addend is 0 before optimizing R_386_GOT32
and R_386_GOT32X relocations. Testcases are added for i386 and x86-64.
bfd/
* elf32-i386.c (elf_i386_convert_load): Skip if addend isn't 0.
(elf_i386_relocate_section): Skip R_386_GOT32X optimization if
addend isn't 0.
ld/testsuite/
* ld-i386/i386.exp: Run mov2a, mov2b and mov3.
* ld-i386/mov2.s: New file.
* ld-i386/mov2a.d: Likewise.
* ld-i386/mov2b.d: Likewise.
* ld-i386/mov3.d: Likewise.
* ld-i386/mov3.s: Likewise.
* ld-x86-64/mov2.s: Likewise.
* ld-x86-64/mov2a.d: Likewise.
* ld-x86-64/mov2b.d: Likewise.
* ld-x86-64/mov2c.d: Likewise.
* ld-x86-64/mov2d.d: Likewise.
* ld-x86-64/x86-64.exp: Run mov2a, mov2b, mov2c and mov2d.
Nick Clifton [Fri, 4 Dec 2015 15:07:10 +0000 (15:07 +0000)]
Fix GAS testsuite failures for COFF/PE based ARM targets.
PR gas/19276
gas * config/tc-arm.h (SUB_SEGMENT_ALIGN): Do not define for COFF/PE
targets.
testsuite * gas/arm/align64.d: Skip for COFF/PE targets.
* gas/arm/bundle-lock.d: Adjust for COFF/PE targets.
Tristan Gingold [Thu, 3 Dec 2015 10:57:29 +0000 (11:57 +0100)]
Remove useless loop in elf.c
Claudiu Zissulescu [Fri, 4 Dec 2015 10:49:57 +0000 (10:49 +0000)]
Fix failures in the GAS testsuite for the ARC architecture.
gas * config/tc-arc.c (arc_option): Sets all internal gas options when
parsing .cpu directive.
(declare_register_set): Declare all 64 registers.
(md_section_align): Refactor.
(md_pcrel_from_section): Remove assert.
(pseudo_operand_match): Fix pseudo operand match.
(find_reloc): Use flags filed, extend matching.
* config/tc-arc.h (TC_VALIDATE_FIX): Don't fixup any PLT
relocation.
testsuite * gas/arc/bic.d: Update test.
* gas/arc/add_s-err.s: New file.
* gas/arc/cpu-warn1.s: Likewise.
* gas/arc/pcl-relocs.d: Likewise.
* gas/arc/pcl-relocs.s: Likewise.
* gas/arc/pcrel-relocs.d: Likewise.
* gas/arc/pcrel-relocs.s: Likewise.
* gas/arc/pic-relocs.d: Likewise.
* gas/arc/pic-relocs.s: Likewise.
* gas/arc/plt-relocs.d: Likewise.
* gas/arc/plt-relocs.s: Likewise.
* gas/arc/pseudos.d: Likewise.
* gas/arc/pseudos.s: Likewise.
* gas/arc/sda-relocs.d: Likewise.
* gas/arc/sda-relocs.s: Likewise.
* gas/arc/sda-relocs2.d: Likewise.
* gas/arc/sda-relocs2.s: Likewise.
* gas/arc/tls-relocs.d: Likewise.
* gas/arc/tls-relocs.s: Likewise.
opcode * arc.h (arc_reloc_equiv_tab): Replace flagcode with flags[32].
opcodes * arc-dis.c (special_flag_p): Match full mnemonic.
* arc-opc.c (print_insn_arc): Check section size to read
appropriate number of bytes. Fix printing.
* arc-tbl.h: Fix instruction table. Allow clri/seti instruction without
arguments.
GDB Administrator [Fri, 4 Dec 2015 00:00:12 +0000 (00:00 +0000)]
Automatic date update in version.in
Vladimir Radosavljevic [Thu, 3 Dec 2015 23:29:17 +0000 (15:29 -0800)]
Take addend into account when making GOT entries for local symbols.
gold/
* object.cc (Sized_relobj::do_for_all_local_got_entries): Use
Local_got_entry_key for searching in local_got_offsets_.
* object.h (class Local_got_entry_key): New class.
(Relobj::local_has_got_offset): New overloaded method.
(Relobj::local_got_offset): Likewise.
(Relobj::set_local_got_offset): Likewise.
(Relobj::do_local_has_got_offset): Add addend argument.
(Relobj::do_local_got_offset): Likewise.
(Relobj::do_set_local_got_offset): Likewise.
(Sized_relobj::do_local_has_got_offset): Add addend argument, and use
Local_got_entry_key for searching through local_got_offsets_.
(Sized_relobj::do_local_got_offset): Likewise.
(Sized_relobj::do_set_local_got_offset): Likewise.
(Sized_relobj::Local_got_offsets): Change type of the key from
unsigned int to Local_got_entry_key, and add hash and equal_to.
* output.cc (Got_entry::write): Take addend into account for
calculating value of the local symbol for GOT.
(Output_data_got::add_local): New definition of overloaded method.
(Output_data_got::add_local_with_rel): Likewise.
(Output_data_got::add_local_pair_with_rel): Likewise.
* output.h (Output_data_got::add_local): New declaration of overloaded
method.
Antoine Tremblay [Thu, 3 Dec 2015 18:56:37 +0000 (13:56 -0500)]
Remove duplicate arch/arm.h include in linux-arm-low.c.
A duplicate include arm/arm.h was introduced, remove it.
Pushed as obvious.
gdb/gdbserver/ChangeLog:
* linux-arm-low.c: Remove duplicate arch/arm.h include.
Yao Qi [Thu, 3 Dec 2015 17:12:41 +0000 (17:12 +0000)]
Run gdb.base/sizeof.exp with board having gdb,noinferiorio
In my remote cross testing (x86_64 host and aarch64 target), the test
gdb.base/sizeof.exp is skipped because gdb,noinferiorio is defined in
my gdbserver board file. Tests are skipped because the test checks
the expected value from the program's output, but I don't see why must
do it this way. With my patch applied, we can save the result in variable
in the program, and check the variable then. Then, the test doesn't rely
on inferiorio.
gdb/testsuite:
2015-12-03 Yao Qi <yao.qi@linaro.org>
* gdb.base/sizeof.c: Don't include stdio.h and
../lib/unbuffer_output.c.
(main): New variable 'size' and 'value'. Remove printf and
gdb_unbuffer_output. Assign return value to size and value.
* gdb.base/sizeof.exp: Remove the checking to gdb,noinferiorio
at the beginning.
(check_sizeof): Check the result by printing variable 'size'.
(check_valueof): Check the result by printing variable 'value'.
Tristan Gingold [Thu, 3 Dec 2015 10:56:09 +0000 (11:56 +0100)]
Darwin: add new mach-o header flags.
binutils/
* od-macho.c (bfd_mach_o_header_flags_name): Add name
for flags until BFD_MACH_O_MH_APP_EXTENSION_SAFE.
include/mach-o/
* loader.h (bfd_mach_o_header_flags): Add
BFD_MACH_O_MH_APP_EXTENSION_SAFE.
GDB Administrator [Thu, 3 Dec 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Alan Modra [Wed, 2 Dec 2015 05:16:48 +0000 (15:46 +1030)]
addr2line vs. inlined C functions called from C++
In this case the inlined function doesn't have DW_AT_linkage_name in
.debug_info, but the language is C++ so find_nearest_line goes looking
in the symbol table. Since the function is inlined the enclosing
non-inline function symbol is returned from _bfd_elf_find_function,
which is wrong. This patch only uses a symbol if its address matches.
PR binutils/19315
* dwarf2.c (_bfd_elf_find_function): Return symbol matched.
(_bfd_dwarf2_find_nearest_line): Check symbol returned above
against dwarf range.
* elf-bfd.h (_bfd_elf_find_function): Update prototype.
Alan Modra [Wed, 2 Dec 2015 08:53:41 +0000 (19:23 +1030)]
Make --enable-initfini-array the default
* configure.ac (--enable-initfini-array): Remove run test. Default
to "yes". Change help string to --disable-initfini-array.
* configure: Regenerate.
Alan Modra [Wed, 2 Dec 2015 08:19:53 +0000 (18:49 +1030)]
Fix powerpc64 segfault caused by zero r_symndx relocs.
Fixes a segfault in ppc64_elf_tls_optimize found when testing
R_PPC64_ENTRY, and potential for trouble in other places found by
code inspection.
* elf64-ppc.c (ppc64_elf_tls_optimize): Don't segfault on NULL
symbol section or output section.
(ppc64_elf_edit_toc): Similarly for ld -R objects.
(ppc64_elf_size_stubs): Likewise.
Andre Vieira [Wed, 25 Nov 2015 13:56:55 +0000 (13:56 +0000)]
Fix ldah being disassembled as ldaexh
2015-12-02 Andre Vieira <andre.simoesdiasvieira@arm.com>
opcodes/
* arm-dis.c (arm_opcodes): <ldaexh>: Fix typo...
<ldah>: ... to this.
gas/testsuite/
* gas/arm/armv8-a.d: <ldaexh>: Rename mismatched mnemonics ...
<ldah>: ... to this.
GDB Administrator [Wed, 2 Dec 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Tue, 1 Dec 2015 22:45:51 +0000 (14:45 -0800)]
Properly check symbol defined by assignment in linker script
Symbol defined by a linker assignment may have type bfd_link_hash_new
or bfd_link_hash_undefined. And h->def_regular is always set.
elf_i386_convert_load and elf_x86_64_convert_load should check
h->def_regular as well as bfd_link_hash_undefined and bfd_link_hash_new
to see if a symbol is defined by a linker script.
bfd/
PR ld/19319
* elf32-i386.c (elf_i386_convert_load): Check h->def_regular
instead of bfd_link_hash_new.
* elf64-x86-64.c (elf_x86_64_convert_load): Likewise. Skip
relocation overflow for bfd_link_hash_undefined and
bfd_link_hash_new if h->def_regular is set.
ld/testsuite/
PR ld/19319
* ld-i386/i386.exp: Run pr19319 test.
* ld-x86-64/x86-64.exp: Likewise.
* ld-i386/pr19319.dd: New file.
* ld-i386/pr19319a.S: Likewise.
* ld-i386/pr19319b.S: Likewise.
* ld-x86-64/pr19319.dd: Likewise.
* ld-x86-64/pr19319a.S: Likewise.
* ld-x86-64/pr19319b.S: Likewise.
Ulrich Weigand [Tue, 1 Dec 2015 17:04:39 +0000 (18:04 +0100)]
Avoid "operation may be undefined" warning in remote.c
GCC 4.1 gives the following warning:
gdb/remote.c: In function 'remote_parse_stop_reply':
gdb/remote.c:6549: warning: operation on 'p' may be undefined
on this line of code:
event->ptid = read_ptid (++p, &p);
Since p actually isn't used afterwards anyway, simply use NULL.
gdb/
* remote.c (remote_parse_stop_reply): Avoid GCC 4.1 "operation
may be undefined" warning.
Ulrich Weigand [Tue, 1 Dec 2015 16:49:27 +0000 (17:49 +0100)]
Fix uninitialized variable warnings in remote.c
Fix a couple of places where a struct thread_item was added to a
vector while the item.name field was uninitialized.
gdb/
* remote.c (remote_newthread_step): Initialize item.name.
(remote_get_threads_with_qthreadinfo): Likewise.
Yao Qi [Tue, 1 Dec 2015 12:37:04 +0000 (12:37 +0000)]
Run gdb.base/disp-step-syscall.exp for aarch64-linux
This patch handles target aarch64*-*-linux* for syscall instruction.
gdb/testsuite:
2015-12-01 Yao Qi <yao.qi@linaro.org>
* gdb.base/disp-step-syscall.exp: Define syscall instruction
for aarch64*-*-linux* target.
Alan Modra [Tue, 1 Dec 2015 03:26:09 +0000 (13:56 +1030)]
Trim unused params from aout adjust_sizes_and_vmas
* aoutx.h (adjust_sizes_and_vmas): Remove unused text_size and
text_end parameters. Update callers.
* aout-tic30.c: Update adjust_sizes_and_vmas callers.
* hp300hpux.c: Likewise.
* i386lynx.c: Likewise.
* libaout.h: Likewise.
* netbsd.h: Likewise.
* pdp11.c: Likewise.
* riscix.c: Likewise.
Alan Modra [Tue, 1 Dec 2015 01:10:52 +0000 (11:40 +1030)]
Invoke aout N_* macros with pointer to struct internal_exec
No functional changes here.
BTW, some of these headers don't seem to be used anywhere:
include/aout/dynix3.h, include/aout/encap.h, include/aout/hp.h,
gas/config/aout_gnu.h
bfd/
* aout-adobe.c: Invoke aout N_* macros with pointer to
struct internal_exec.
* aout-arm.c: Likewise.
* aout-cris.c: Likewise.
* aout-target.h: Likewise.
* aout-tic30.c: Likewise.
* aoutf1.h: Likewise.
* aoutx.h: Likewise.
* bout.c: Likewise.
* freebsd.h: Likewise.
* gen-aout.c: Likewise.
* hp300hpux.c: Likewise.
* i386aout.c: Likewise.
* i386linux.c: Likewise.
* i386lynx.c: Likewise.
* i386mach3.c: Likewise.
* i386os9k.c: Likewise.
* libaout.h: Likewise.
* m68klinux.c: Likewise.
* m88kmach3.c: Likewise.
* mipsbsd.c: Likewise.
* netbsd.h: Likewise.
* pc532-mach.c: Likewise.
* pdp11.c: Likewise.
* riscix.c: Likewise.
* sparclinux.c: Likewise.
* sparclynx.c: Likewise.
gas/
* config/aout_gnu.h: Invoke aout N_* macros with pointer to
struct internal_exec.
include/
* bout.h: Invoke aout N_* macros with pointer to
struct internal_exec.
* os9k.h: Likewise.
include/aout/
* adobe.h: Invoke aout N_* macros with pointer to
struct internal_exec.
* aout64.h: Likewise.
* dynix3.h: Likewise.
* encap.h: Likewise.
* hp.h: Likewise.
* hp300hpux.h: Likewise.
* sun4.h: Likewise.
Alan Modra [Tue, 1 Dec 2015 01:10:25 +0000 (11:40 +1030)]
Don't use BFD_TRADITIONAL_FORMAT flag in COFF support
info->traditional_format is available, or can be easily made
available. This relegates BFD_TRADITIONAL_FORMAT to AOUT use only.
* coff-rs6000.c (_bfd_xcoff_put_symbol_name): Replace abfd param
with info param. Test info->traditional_format rather than
BFD_TRADITIONAL_FORMAT flag.
* coff64-rs6000.c (_bfd_xcoff64_put_symbol_name): Likewise.
* libxcoff.h (struct xcoff_backend_data_rec): Update
_xcoff_put_symbol_name prototype.
(bfd_xcoff_put_symbol_name): Add info param.
* xcofflink.c (xcoff_find_tc0): Update bfd_xcoff_put_symbol_name call.
(xcoff_write_global_symbol): Likewise.
(xcoff_link_input_bfd): Test info->traditional_format rather than
BFD_TRADITIONAL_FORMAT flag.
* cofflink.c (_bfd_coff_final_link): Likewise.
(_bfd_coff_link_input_bfd, _bfd_coff_write_global_sym): Likewise.
Alan Modra [Tue, 1 Dec 2015 01:10:02 +0000 (11:40 +1030)]
binutils/configure update
Missed from
f8c2a965.
* configure: Regenerate.
Alan Modra [Tue, 1 Dec 2015 01:09:37 +0000 (11:39 +1030)]
SRC-POTFILES.in update
* po/SRC-POTFILES.in: Regenerate.
Alan Modra [Tue, 1 Dec 2015 03:06:30 +0000 (13:36 +1030)]
Re: ARC port broken reloc processing
* elf32-arc.c (ARC_ELF_HOWTO): Delete.
(arc_elf_howto): New function.
(bfd_elf32_bfd_reloc_type_lookup): Use it in place of existing
init code.
(bfd_elf32_bfd_reloc_name_lookup): Use arc_elf_howto.
(arc_info_to_howto_rel, elf_arc_relocate_section): Likwise.
(elf_arc_check_relocs): Likewise.
Alan Modra [Tue, 1 Dec 2015 00:40:23 +0000 (11:10 +1030)]
ARC port broken reloc processing
This initialises howto.dst_mask so that relocations in debug sections
are applied by the generic reloc processing used by objdump to display
debug sections.
* elf32-arc.c (arc_elf_howto_init): Init dst_mask.
GDB Administrator [Tue, 1 Dec 2015 00:00:07 +0000 (00:00 +0000)]
Automatic date update in version.in
Antoine Tremblay [Thu, 19 Nov 2015 16:29:10 +0000 (11:29 -0500)]
Remove too simple breakpoint_reinsert_addr implementations.
This patch removes too simple implementations of the breakpoint_reinsert_addr
operation.
The only reason to keep them around was to support thread events when
PTRACE_EVENT_CLONE was not present but this support has been removed in a
previous patch.
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
Also compilation was tested on aarch64, bfin, cris, crisv32,
m32r, mips, nios2, ppc, s390, sparc, tic6x, tile, xtensa.
gdb/gdbserver/ChangeLog:
* linux-arm-low.c (arm_reinsert_addr): Remove function.
(struct linux_target_ops <breakpoint_reinsert_addr>: Set to NULL.
* linux-cris-low.c (cris_reinsert_addr> Remove function.
(struct linux_target_ops) <breakpoint_reinsert_addr>: Set to NULL.
* linux-crisv32-low.c (cris_reinsert_addr): Remove function.
(struct linux_target_ops) <breakpoint_reinsert_addr>: Set to NULL.
* linux-mips-low.c (mips_reinsert_addr): Remove function.
(struct linux_target_ops) <breakpoint_reinsert_addr>: Set to NULL.
* linux-nios2-low.c (nios2_reinsert_addr): Remove function.
(struct linux_target_ops) <breakpoint_reinsert_addr>: Set to NULL.
* linux-sparc-low.c (sparc_reinsert_addr): Remove function.
(struct linux_target_ops) <breakpoint_reinsert_addr>: Set to NULL.
Antoine Tremblay [Thu, 19 Nov 2015 16:29:10 +0000 (11:29 -0500)]
Remove support for thread events without PTRACE_EVENT_CLONE in GDBServer.
This patch removes support for thread events if PTRACE_EVENT_CLONE is not
supported in GDBServer.
Before, on systems that did not support PTRACE_EVENT_CLONE, both GDB and
GDBServer coordinated with libthread_db.so to insert breakpoints at magic
locations in libpthread.so, in order to break at thread creation and thread
death.
Simple software single stepping support was implemented to step over these
breakpoints in case there was no hardware single stepping support. However,
these simple software single stepping implementations were not fit for any other
use as discussed in :
https://sourceware.org/ml/gdb-patches/2015-04/msg01110.html
These too simple implementations conflict with ongoing work to make proper
implementations of software single stepping in GDBServer.
The problem is that if some implementations are correct and others are not and
only there for the thread magic breakpoint, we can't enable features based
solely software single step support since some would be broken.
To keep the incorrect implementations and allow the new proper ones at the same
time we would need to implement fallback code and it quickly becomes ugly and
confusing with multiple checks for legacy software single step or proper
software single step.
However, PTRACE_EVENT_CLONE was first introduced in Linux 2.5.46,
released in November 2002.
So I think it's reasonable to just remove support for kernels that don't support
PTRACE_EVENT_CLONE, and sidestep the libthread_db breakpoints issues entirely.
This thread on the mailling list discusses the issue :
https://sourceware.org/ml/gdb/2015-10/msg00078.html
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_look_up_symbols): Don't call
linux_supports_traceclone.
* linux-low.h (thread_db_init): Remove use_events argument.
* thread-db.c (thread_db_use_event): Remove global variable.
(struct thread_db) <td_thr_event_enable_p>: Remove field.
(struct thread_db) <td_create_bp>: Remove field.
(thread_db_create_event): Remove function.
(thread_db_enable_reporting): Likewise.
(find_one_thread): Don't check for thread_db_use_events.
(attach_thread): Likewise.
(thread_db_load_search): Remove td_thr_event_enable_p initialization.
(try_thread_db_load_1): Don't check for thread_db_use_events.
(thread_db_init): Remove use_events argument and thread events
handling.
(remove_thread_event_breakpoints): Remove function.
(thread_db_detach): Remove call to remove_thred_event_breakpoints.
Antoine Tremblay [Thu, 19 Nov 2015 16:29:10 +0000 (11:29 -0500)]
Refactor queries for hardware and software single stepping support in GDBServer.
Before this patch there was only one call: can_hardware_single_step. Its
implementation was a check on breakpoint_reinsert_addr if NULL it assumed
that the target could hardware single step.
This patch prepares for the case where this is not true anymore.
In order to improve software single stepping in GDBServer the
breakpoint_reinsert_addr operation of targets that had a very simple
software implementation used only for stepping over thread creation events
will be removed.
This will create a case where a target does not support hardware single
step and has the operation breakpoint_reinsert_addr set to NULL, thus
can_hardware_single_step needs to be implemented another way.
A new target operation supports_hardware_single_step is introduced and is
to return true if the target does support such a feature, support for the
feature is manually hardcoded.
Note that the hardware single step support was enabled as per the current
behavior, I did not check if tile for example really has ptrace singlestep
support but since the current implementation assumed it had, I kept it
that way.
No regressions on Ubuntu 14.04 on ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
Compilation tested on: aarch64,arm,bfind,crisv32,m32r,ppc,s390,tic6x,tile,
xtensa.
Not tested : sh.
gdb/gdbserver/ChangeLog:
* linux-aarch64-low.c (aarch64_supports_hardware_single_step):
New function.
(struct linux_target_ops) <supports_hardware_single_step>: Initialize.
* linux-arm-low.c (arm_supports_hardware_single_step): New function.
(struct linux_target_ops) <supports_hardware_single_step>: Initialize.
* linux-bfin-low.c (bfin_supports_hardware_single_step): New function.
(struct linux_target_ops) <bfin_supports_hardware_single_step>:
Initialize.
* linux-crisv32-low.c (cris_supports_hardware_single_step):
New function.
(struct linux_target_ops) <supports_hardware_single_step>: Initialize.
* linux-low.c (can_hardware_single_step): Use
supports_hardware_single_step.
(can_software_single_step): New function.
(start_step_over): Call can_software_single_step.
(linux_supports_hardware_single_step): New function.
(struct target_ops) <supports_software_single_step>: Initialize.
* linux-low.h (struct linux_target_ops)
<supports_hardware_single_step>: Initialize.
* linux-m32r-low.c (m32r_supports_hardware_single_step): New function.
(struct linux_target_ops) <supports_hardware_single_step>: Initialize.
* linux-ppc-low.c (ppc_supports_hardware_single_step): New function.
(struct linux_target_ops) <supports_hardware_single_step> Initialize.
* linux-s390-low.c (s390_supports_hardware_single_step): New function.
(struct linux_target_ops) <supports_hardware_single_step>: Initialize.
* linux-sh-low.c (sh_supports_hardware_single_step): New function.
(struct linux_target_ops) <supports_hardware_single_step>: Initialize.
* linux-tic6x-low.c (tic6x_supports_hardware_single_step): New function.
(struct linux_target_ops) <tic6x_supports_hardware_single_step>:
Initialize.
* linux-tile-low.c (tile_supports_hardware_single_step): New function.
(struct linux_target_ops) <tile_supports_hardware_single_step>:
Initialize.
* linux-x86-low.c (x86_supports_hardware_single_step) New function.
(struct linux_target_ops) <supports_hardware_single_step>: Initialize.
* linux-xtensa-low.c (xtensa_supports_hardware_single_step):
New function.
(struct linux_target_ops) <supports_hardware_single_step>: Initialize.
* target.h (struct target_ops): <supports_software_single_step>:
New field.
(target_supports_software_single_step): New macro.
Antoine Tremblay [Mon, 30 Nov 2015 20:16:22 +0000 (15:16 -0500)]
Fix instruction skipping when using software single step in GDBServer
Without this patch, when doing a software single step, with for example
a conditional breakpoint, gdbserver would wrongly avance the pc of
breakpoint_len and skips an instruction.
This is due to gdbserver assuming that it's hardware single stepping.
When it resumes from the breakpoint address it expects the trap to be
caused by ptrace and if it's rather caused by a software breakpoint
it assumes this is a permanent breakpoint and that it needs to skip
over it.
However when software single stepping, this breakpoint is legitimate as
it's the reinsert breakpoint gdbserver has put in place to break at
the next instruction. Thus gdbserver wrongly advances the pc and skips
an instruction.
This patch fixes this behavior so that gdbserver checks if it is a
reinsert breakpoint from software single stepping. If it is it won't
advance the pc. And if there's no reinsert breakpoint there we assume
then that it's a permanent breakpoint and advance the pc.
Here's a commented log of what would happen before and after the fix on
gdbserver :
/* Here there is a conditional breakpoint at 0x10428 that needs to be
stepped over. */
Need step over [LWP 11204]? yes, found breakpoint at 0x10428
...
/*
e7f001f0 is a breakpoint instruction on arm
Here gdbserver writes the software breakpoint we would like to hit
*/
Writing
e7f001f0 to 0x0001042c in process 11204
...
Resuming lwp 11220 (continue, signal 0, stop not expected)
pending reinsert at 0x10428
stop pc is
00010428
continue from pc 0x10428
...
/* Here gdbserver hit the software breakpoint that was in place
for the step over */
stop pc is
0001042c
pc is 0x1042c
step-over for LWP 11220.11220 executed software breakpoint
Finished step over.
Could not find fast tracepoint jump at 0x10428 in list (reinserting).
/* Here gdbserver writes back the original instruction */
Writing
e50b3008 to 0x0001042c in process 11220
Step-over finished.
Need step over [LWP 11220]? No
/* Here because gdbserver assumes this is a permenant breakpoint it advances
the pc of breakpoint_len, in this case 4 bytes, so we have just skipped
the instruction that was written back here :
Writing
e50b3008 to 0x0001042c in process 11220
*/
stop pc is
00010430
pc is 0x10430
Need step over [LWP 11220]? No, no breakpoint found at 0x10430
Proceeding, no step-over needed
proceed_one_lwp: lwp 11220
stop pc is
00010430
This patch fixes this situation and we get the right behavior :
Writing
e50b3008 to 0x0001042c in process 11245
Hit a gdbserver breakpoint.
Hit a gdbserver breakpoint.
Step-over finished.
proceeding all threads.
Need step over [LWP 11245]? No
stop pc is
0001042c
pc is 0x1042c
Need step over [LWP 11245]? No, no breakpoint found at 0x1042c
Proceeding, no step-over needed
proceed_one_lwp: lwp 11245
stop pc is
0001042c
pc is 0x1042c
Resuming lwp 11245 (continue, signal 0, stop not expected)
stop pc is
0001042c
continue from pc 0x1042c
It also works if the value at 0x0001042c is a permanent breakpoint.
If so gdbserver will finish the step over, remove the reinserted breakpoint,
resume at that location and on the next SIGTRAP gdbserver will trigger
the advance PC condition as reinsert_breakpoint_inserted_here will be false.
I also tested this against bp-permanent.exp on arm (with a work in progress
software single step patchset) without any regressions.
It's also tested against x86 bp-permanent.exp without any regression.
So both software and hardware single step are tested.
No regressions on Ubuntu 14.04 on ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_wait_1): Fix pc advance condition.
* mem-break.c (reinsert_breakpoint_inserted_here): New function.
* mem-break.h (reinsert_breakpoint_inserted_here): New declaration.
Antoine Tremblay [Mon, 30 Nov 2015 20:08:04 +0000 (15:08 -0500)]
Fix breakpoint size when stepping over a permanent breakpoint in GDBServer.
When manually stepping over a permanent breakpoint on ARM we need to fetch the
right breakpoint size based on the current instruction set used.
Since this is not encoded in the stop_pc, the instruction mode needs to be
fetched from the CPSR register.
This is done by introducing a new target operation called :
breakpoint_kind_from_current_state.
For other targets that do not need this, breakpoint_kind_from_pc is used.
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/gdbserver/ChangeLog:
* linux-arm-low.c (arm_is_thumb_mode): New function.
(arm_breakpoint_at): Use arm_is_thumb_mode.
(arm_breakpoint_kind_from_current_state): New function.
(struct linux_target_ops) <breakpoint_kind_from_current_state>:
Initialize.
* linux-low.c (linux_wait_1): Call breakpoint_kind_from_current_state.
(linux_breakpoint_kind_from_current_state): New function.
(struct target_ops <breakpoint_kind_from_current_state>: Initialize.
* linux-low.h (struct linux_target_ops)
<breakpoint_kind_from_current_state>: New field.
* target.h (struct target_ops): Likewise.
(target_breakpoint_kind_from_current_state): New macro.
Pedro Alves [Mon, 30 Nov 2015 16:05:27 +0000 (16:05 +0000)]
gdbserver: don't exit until GDB disconnects
When testing with "target remote" with "maint set target-non-stop on",
we regressions like this:
Running /home/pedro/gdb/mygit/build/../src/gdb/testsuite/gdb.threads/continue-pending-after-query.exp ...
FAIL: gdb.threads/continue-pending-after-query.exp: iter 4: continue until exit
FAIL: gdb.threads/continue-pending-after-query.exp: iter 6: continue until exit
FAIL: gdb.threads/continue-pending-after-query.exp: iter 10: continue until exit
=== gdb Summary ===
# of expected passes 28
# of unexpected failures 3
where gdb.log shows:
continue
Continuing.
Remote communication error. Target disconnected.: Connection reset by peer.
(gdb) FAIL: gdb.threads/continue-pending-after-query.exp: iter 4: continue until exit
Enabling gdb + gdbserver debug logs we see:
gdbserver: <<<< exiting linux_wait_1
gdbserver: handling possible serial event
gdbserver: Writing resume reply for LWP 11089.11089:0
gdbserver: handling possible serial event
gdbserver: GDBserver exiting
GDB: Packet received: OK
GDB: infrun: prepare_to_wait
GDB: Sending packet: $vStopped#55...Packet received: W0;process:2b51
GDB: Sending packet: $vStopped#55...Packet received: OK
GDB: infrun: target_wait (-1.0.0, status) =
GDB: infrun: -1.0.0 [Thread 0],
GDB: infrun: status->kind = no-resumed
GDB: Sending packet: $Hgp2b51.2b51#41...Remote connection closed
(gdb) FAIL: gdb.threads/continue-pending-after-query.exp: iter 1: continue until exit
Notice the "Packet received: W0;process:2b51" followed by
vStopped->OK.
That means the process exit notification was successfully sent to GDB
and GDB fetched it. That makes gdbserver exit, in
server.c:process_serial_event:
if (!extended_protocol && have_ran && !target_running ())
{
/* In non-stop, defer exiting until GDB had a chance to query
the whole vStopped list (until it gets an OK). */
if (QUEUE_is_empty (notif_event_p, notif_stop.queue))
{
/* Be transparent when GDB is connected through stdio -- no
need to spam GDB's console. */
if (!remote_connection_is_stdio ())
fprintf (stderr, "GDBserver exiting\n");
remote_close ();
exit (0);
}
}
However, GDB is still busy processing an earlier "no-resumed" event,
and sends a "Hg" packet, which errors out with "Remote connection
closed". IOW, it's not enough to wait for GDB to query the whole
vStopped list, gdbserver needs to wait until the exit event is really
processed.
The fix is to make gdbserver not disconnect until gdb does.
Tested on x86_64 Fedora, native gdbserver, remote + extended-remote +
with and without "maint set target-non-stop on".
gdb/gdbserver/ChangeLog:
2015-10-14 Pedro Alves <palves@redhat.com>
* remote-utils.c (readchar): Don't print "Got EOF" unless
debugging gdbserver.
* server.c (captured_main): Exit gdbserver if gdb disconnects when
in "target remote" mode and there are no processes left to debug.
(process_serial_event): Remove 'have_ran' static local and remove
logic that exits gdbserver in "target remote" mode.
Pedro Alves [Mon, 30 Nov 2015 16:05:26 +0000 (16:05 +0000)]
gdbserver/linux: Always wake up event loop after resume
Running killed-outside.exp in with "maint set target-non-stop on"
hangs currently. This test has the inferior process die with a
SIGKILL while stopped. gdbserver gets a SIGCHLD and reacts by
retrieveing the SIGKILL events out of waitpid. But because the
process is not resumed from GDB's perspective, the event is left
pending. When GDB resumes the process afterwards, the process is not
really resumed because it already has the event pending. But nothing
wakes up the event loop to consume the event.
Handle this in the same way nat/linux-nat.c:linux_nat_resume handles
this.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_resume): Wake up the event loop before
returning.
Pedro Alves [Mon, 30 Nov 2015 16:05:26 +0000 (16:05 +0000)]
gdbserver:prepare_access_memory: pick another thread
Say GDB wants to access the inferior process's memory. The current
remote general thread is 3, but GDB's switched to thread 2. Because
both threads are of the same process, GDB skips making the remote
thread be thread 2 as well (sending an Hg packet) before accessing
memory (remote.c:set_general_process). However, if thread 3 has
exited meanwhile, thread 3 no longer exists on the server and
gdbserver points current_thread to NULL. The result is the memory
access fails, even through the process still exists.
Fix this by making prepare_to_access memory select the thread to
access memory through.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* mem-break.c (check_gdb_bp_preconditions): Remove current_thread
check.
(set_gdb_breakpoint): If prepare_to_access_memory fails, set *ERR
to -1.
* target.c (struct thread_search): New structure.
(thread_search_callback): New function.
(prev_general_thread): New global.
(prepare_to_access_memory, done_accessing_memory): New functions.
* target.h (prepare_to_access_memory, done_accessing_memory):
Replace macros with function declarations.
Pedro Alves [Mon, 30 Nov 2015 16:05:25 +0000 (16:05 +0000)]
Implement TARGET_WAITKIND_NO_RESUMED in the remote protocol
Testing with "maint set target-non-stop on" causes regressions in
tests that rely on TARGET_WAITKIND_NO_RESUMED, which isn't modelled on
the RSP. In real all-stop, gdbserver detects the situation and
reporst error to GDB, and so the tests (e.g.,
gdb.threads/no-unwaited-for-left.exp) at fail quickly. But with
"maint set target-non-stop on", GDB instead hangs forever waiting for
a stop reply that never comes, and so the tests take longer to time
out.
This adds a new "N" stop reply packet that maps 1-1 to
TARGET_WAITKIND_NO_RESUMED.
gdb/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
PR 14618
* NEWS (New remote packets): Mention the N stop reply.
* remote.c (remote_protocol_features): Add "no-resumed" entry.
(remote_query_supported): Report no-resumed+ support.
(remote_parse_stop_reply): Handle 'N'.
(process_stop_reply): Handle TARGET_WAITKIND_NO_RESUMED.
(remote_wait_as): Handle 'N' / TARGET_WAITKIND_NO_RESUMED.
(_initialize_remote): Register "set/show remote
no-resumed-stop-reply" commands.
gdb/doc/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
PR 14618
* gdb.texinfo (Stop Reply Packets): Document the N stop reply.
(Remote Configuration): Add the "set/show remote
no-resumed-stop-reply" to the available settings table.
(General Query Packets): Document the "no-resumed" qSupported
feature.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
PR 14618
* linux-low.c (linux_wait_1): If the last resumed thread is gone,
report TARGET_WAITKIND_NO_RESUMED.
* remote-utils.c (prepare_resume_reply): Handle
TARGET_WAITKIND_NO_RESUMED.
* server.c (report_no_resumed): New global.
(handle_query) <qSupported>: Handle "no-resumed+". Report
"no-resumed+" support.
(resume): When the target reports TARGET_WAITKIND_NO_RESUMED, only
return error if the client doesn't support no-resumed events.
(push_stop_notification): New function.
(handle_target_event): Use it. Report TARGET_WAITKIND_NO_RESUMED
events if the client supports them.
gdb/testsuite/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* gdb.threads/no-unwaited-for-left.exp: Remove setup_kfail calls.
Pedro Alves [Mon, 30 Nov 2015 16:05:24 +0000 (16:05 +0000)]
infrun: Fix TARGET_WAITKIND_NO_RESUMED handling in non-stop mode
Running the testsuite against gdbserver with "maint set target-non-stop on"
stumbled on a set of problems. See code comments for details.
This handles my concerns expressed in PR14618.
gdb/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
PR 14618
* infrun.c (handle_no_resumed): New function.
(handle_inferior_event_1) <TARGET_WAITKIND_NO_RESUMED>: Defer to
handle_no_resumed.
Pedro Alves [Mon, 30 Nov 2015 16:05:23 +0000 (16:05 +0000)]
testsuite: Range stepping and non-stop mode
The range-stepping tests fail with "maint set target-non-stop on" mode
because exec_cmd_expect_vCont_count doesn't know that in non-stop
mode, vCont's reply is simply "OK".
gdb/testsuite/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* lib/range-stepping-support.exp (exec_cmd_expect_vCont_count):
Handle non-stop mode vCont replies.
Pedro Alves [Mon, 30 Nov 2015 16:05:23 +0000 (16:05 +0000)]
gdbserver: fix killed-outside.exp
killed-outside.exp regresses with "maint set target-non-stop on". The
logs show:
(gdb) continue
Continuing.
infrun: clear_proceed_status_thread (Thread 9028.9028)
infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: proceed: resuming Thread 9028.9028
Sending packet: $Z0,
3615a03966,1#4b... Notification received: Stop:X9;process:2344
Packet received: E01
Sending packet: $Z0,
3615a13970,1#47...Packet received: E01
Sending packet: $Z0,
3615a14891,1#4a...Packet received: E01
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [Thread 9028.9028] at 0x4005e4
Sending packet: $vCont;c:p2344.2344#1a...Packet received: E.target not running.
Sending packet: $qXfer:threads:read::0,fff#03...Packet received: l<threads>\n</threads>\n
Sending packet: $vStopped#55...Packet received: OK
Unexpected vCont reply in non-stop mode: E.target not running.
(gdb) remote_async_inferior_event_handler
infrun: target_wait (-1.0.0, status) =
infrun: 9028.0.0 [process 9028],
infrun: status->kind = signalled, signal = GDB_SIGNAL_KILL
infrun: TARGET_WAITKIND_SIGNALLED
Program terminated with signal SIGKILL, Killed.
The program no longer exists.
infrun: stop_waiting
infrun: clear_step_over_info
infrun: stop_all_threads
remote_thread_exit_events(1)
Note the "Unexpected vCont reply" error.
I traced it to a problem in status_pending_p_callback. It resumes an
LWP when it shouldn't.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* linux-low.c (thread_still_has_status_pending_p): Don't check
vCont;t here.
(lwp_resumed): New function.
(status_pending_p_callback): Return early if the LWP is not
supposed to be resumed.
Pedro Alves [Mon, 30 Nov 2015 16:05:21 +0000 (16:05 +0000)]
Remote thread create/exit events
When testing with "maint set target-non-stop on", a few
threading-related tests expose an issue that requires new RSP packets.
Say there are 3 threads running, 1-3. If GDB tries to stop thread 1,
2 and 3, and then waits for their stops, but meanwhile say, thread 2
exits, GDB hangs forever waiting for a stop for thread 2 that won't
ever happen.
This patch fixes the issue by adding support for thread exit events to
the protocol. However, we don't want these always enabled, as they're
useless most of the time, and would slow down remote debugging. So I
made it so that GDB can enable/disable them, and then made gdb do that
around the cases that need it, which currently is only
infrun.c:stop_all_threads.
In turn, if we have thread exit events, then the extra "thread x
exited" traffic slows down attach-many-short-lived-threads.exp enough
that gdb has trouble keeping up with new threads that are spawned
while gdb tries to stop existing ones. To fix that I added support
for the counterpart thread created events too. Enabling those when we
try to stop threads ensures that new threads never get a chance to
themselves start new threads, killing the race.
gdb/doc/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Remote Configuration): List "set/show remote
thread-events" command in configuration table.
(Stop Reply Packets): Document "T05 create" stop
reason and 'w' stop reply.
(General Query Packets): Document QThreadEvents packet. Document
QThreadEvents qSupported feature.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* linux-low.c (handle_extended_wait): Assert that the LWP's
waitstatus is TARGET_WAITKIND_IGNORE. If GDB wants to hear about
thread create events, leave the new child's status pending.
(linux_low_filter_event): If GDB wants to hear about thread exit
events, leave the LWP marked dead and don't delete it.
(linux_wait_for_event_filtered): Don't check for thread exit.
(filter_exit_event): New function.
(linux_wait_1): Use it, when returning an exit event.
(linux_resume_one_lwp_throw): Assert that the LWP's
waitstatus is TARGET_WAITKIND_IGNORE.
* remote-utils.c (prepare_resume_reply): Handle
TARGET_WAITKIND_THREAD_CREATED and TARGET_WAITKIND_THREAD_EXITED.
* server.c (report_thread_events): New global.
(handle_general_set): Handle QThreadEvents.
(handle_query) <qSupported>: Handle and report QThreadEvents+;
(handle_target_event): Handle TARGET_WAITKIND_THREAD_CREATED and
TARGET_WAITKIND_THREAD_EXITED.
* server.h (report_thread_events): Declare.
gdb/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* NEWS (New commands): Mention "set/show remote thread-events"
commands.
(New remote packets): Mention thread created/exited stop reasons
and QThreadEvents packet.
* infrun.c (disable_thread_events): New function.
(stop_all_threads): Disable/enable thread create/exit events.
Handle TARGET_WAITKIND_THREAD_EXITED.
(handle_inferior_event_1): Handle TARGET_WAITKIND_THREAD_CREATED
and TARGET_WAITKIND_THREAD_EXITED.
* remote.c (remove_child_of_pending_fork): Also remove threads of
threads that have TARGET_WAITKIND_THREAD_EXITED events.
(remote_parse_stop_reply): Handle "create" magic register. Handle
'w' stop reply.
(initialize_remote): Install remote_thread_events as
to_thread_events target hook.
(remote_thread_events): New function.
* target-delegates.c: Regenerate.
* target.c (target_thread_events): New function.
* target.h (struct target_ops) <to_thread_events>: New field.
(target_thread_events): Declare.
* target/waitstatus.c (target_waitstatus_to_string): Handle
TARGET_WAITKIND_THREAD_CREATED and TARGET_WAITKIND_THREAD_EXITED.
* target/waitstatus.h (enum target_waitkind)
<TARGET_WAITKIND_THREAD_CREATED, TARGET_WAITKIND_THREAD_EXITED):
New values.
Pedro Alves [Mon, 30 Nov 2015 16:05:19 +0000 (16:05 +0000)]
Make dprintf-non-stop.exp cope with remote testing
Testing with the extended-remote board with "maint set target-non-stop
on" shows a dprintf-non-stop.exp regression. The issue is simply that
the test is expecting output that is only valid for the native target:
native:
[process 8676] #1 stopped.
remote:
[Thread 8900.8900] #1 stopped.
In order to expose this without "maint set target-non-stop on", this
restarts gdb with non-stop mode already enabled.
gdb/testsuite/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* gdb.base/dprintf-non-stop.exp: Use build_executable instead of
prepare_for_testing. Start gdb with "set non-stop on" appended to
GDBFLAGS. Lax expected stop output.
Pedro Alves [Mon, 30 Nov 2015 16:05:19 +0000 (16:05 +0000)]
gdbserver resume_stop handling bug
Running attach-many-short-lived-threads.exp with the extended-remote
board with "maint set target-non-stop on" times out -- the attach
never completes. Enabling infrun debug logs, we see that GDB is stuck
stopping all threads:
infrun: target_wait (-1.0.0, status) =
infrun: 1639.22213.0 [Thread 1639.22213],
infrun: status->kind = stopped, signal = GDB_SIGNAL_0
infrun: Thread 1639.22260 not executing
infrun: Thread 1639.22256 not executing
infrun: Thread 1639.22258 not executing
infrun: Thread 1639.22257 not executing
infrun: Thread 1639.22259 not executing
infrun: Thread 1639.22255 not executing
infrun: Thread 1639.22253 executing, already stopping
infrun: Thread 1639.22251 executing, already stopping
infrun: Thread 1639.22252 executing, already stopping
infrun: Thread 1639.22250 executing, already stopping
infrun: Thread 1639.22254 executing, already stopping
infrun: Thread 1639.22247 executing, already stopping
infrun: Thread 1639.22213 not executing
infrun: Thread 1639.22207 not executing
infrun: Thread 1639.22201 not executing
infrun: Thread 1639.22219 not executing
infrun: Thread 1639.1639 not executing
** HANG HERE **
GDB is waiting for the stop replies of any of those "already stopping"
threads. Take 22253 for example. On the gdbserver logs we see:
...
resume_stop request for LWP 22253
stopping LWP 22253
Sending sigstop to lwp 22253
linux_resume done
...
and:
my_waitpid (-1, 0x40000001)
my_waitpid (-1, 0x80000001): status(3057f), 22253
LWFE: waitpid(-1, ...) returned 22253, ERRNO-OK
LLW: waitpid 22253 received Trace/breakpoint trap (stopped)
pc is 0x3615ef4ce1
HEW: Got clone event from LWP 22253, new child is LWP 22259
but from here on, we never see any other event for LWP 22253. In
particular, we never see the expected SIGSTOP (from "Sending sigstop"
above). The issue is that linux_resume_stopped_resumed_lwps never
re-resumes the 22253 after the clone event.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* linux-low.c (resume_stopped_resumed_lwps): Don't check whether
the thread's last_resume_kind was resume_stop.
Pedro Alves [Mon, 30 Nov 2015 16:05:18 +0000 (16:05 +0000)]
gdbserver crash if gdb attaches too fast
With "maint set target-non-stop on", the attach tests occasionally
crash gdbserver.
Basically, gdb attaches with vAttach;PID, and then shortly after reads
the xml target description for that process, to figure out the
process' architecture. On the gdbserver side, the target description
is only filled in when the first process/thread in the thread group
reports its initial PTRACE_ATTACH SIGSTOP. So if GDB is fast enough,
it can read the target description _before_ that initial stop, and
then gdbserver dies dereferencing a NULL tdesc pointer.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_attach): In non-stop mode, wait for one stop
before returning.
Pedro Alves [Mon, 30 Nov 2015 16:05:17 +0000 (16:05 +0000)]
New vCtrlC packet, non-stop mode equivalent of \003
There's currently no non-stop equivalent of the all-stop ^C (\003)
"packet" that GDB sends when a ctrl-c is pressed while a foreground
command is active. There's vCont;t, but that's defined to cause a
"signal 0" stop.
This fixes many tests that type ^C, when testing with extended-remote
with "maint set target-non-stop on". E.g.:
Continuing.
talk to me baby
PASS: gdb.base/interrupt.exp: process is alive
a
a
PASS: gdb.base/interrupt.exp: child process ate our char
^C
[Thread 22730.22730] #1 stopped.
0x0000003615ee6650 in __read_nocancel () at ../sysdeps/unix/syscall-template.S:81
81 T_PSEUDO (SYSCALL_SYMBOL, SYSCALL_NAME, SYSCALL_NARGS)
(gdb) FAIL: gdb.base/interrupt.exp: send_gdb control C
p func1 ()
gdb/
2015-11-30 Pedro Alves <palves@redhat.com>
* NEWS (New remote packets): Mention vCtrlC.
* remote.c (PACKET_vCtrlC): New enum value.
(async_remote_interrupt): Call target_interrupt instead of
target_stop.
(remote_interrupt_as): Remove 'ptid' parameter.
(remote_interrupt_ns): New function.
(remote_stop): Adjust.
(remote_interrupt): If the target is in non-stop mode, try
interrupting with vCtrlC.
(initialize_remote): Install set remote ctrl-c packet.
gdb/doc/
2015-11-30 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Bootstrapping): Add "interrupting remote targets"
anchor.
(Packets): Document vCtrlC.
gdb/gdbserver/
2015-11-30 Pedro Alves <palves@redhat.com>
* server.c (handle_v_requests): Handle vCtrlC.
Pedro Alves [Mon, 30 Nov 2015 16:05:16 +0000 (16:05 +0000)]
remote: stop reason and watchpoint data address per thread
Running local-watch-wrong-thread.exp with "maint set target-non-stop
on" exposes that gdb/remote.c only records whether the target stopped
for a breakpoint/watchpoint plus the watchpoint data address *for the
last reported remote event*. But in non-stop mode, we need to keep
that info per-thread, as each thread can end up with its own
last-status pending.
gdb/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* remote.c (struct remote_state) <remote_watch_data_address,
stop_reason>: Delete fields.
(struct private_thread_info) <stop_reason, watch_data_address>:
New fields.
(resume_clear_thread_private_info): New function.
(append_pending_thread_resumptions): Call it.
(remote_resume): Clear all threads' private info.
(process_stop_reply): Adjust.
(remote_wait_as): Don't reference remote_state's stop_reason
field.
(remote_stopped_by_sw_breakpoint)
(remote_stopped_by_hw_breakpoint, remote_stopped_by_watchpoint)
(remote_stopped_data_address): Adjust to refer get data from the
current thread.
Pedro Alves [Mon, 30 Nov 2015 16:05:15 +0000 (16:05 +0000)]
gdbserver crash running gdb.threads/non-ldr-exc-1.exp
This fixes a gdbserver crash when running
gdb.threads/non-ldr-exc-1.exp with "maint set target-non-stop on".
The problem is that qSymbol is called when gdbserver has
current_thread == NULL.
gdb/gdbserver/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* gdbthread.h (find_any_thread_of_pid): Declare.
* inferiors.c (thread_of_pid, find_any_thread_of_pid): New
functions.
* server.c (handle_query): If current_thread is NULL, look for
another thread of the selected process.
Pedro Alves [Mon, 30 Nov 2015 16:05:14 +0000 (16:05 +0000)]
attach + target always in non-stop mode: stop all threads
When running with "maint set target-non-stop on", and in all-stop
mode, nothing is stopping all threads after attaching. vAttach in
non-stop can leave all threads running and GDB has to explicitly pause
them.
This is not visible with the native target, as in that case, attach
always stops all threads (the core re-resumes them in case of
"attach&").
In addition, it's not defined which thread manages to report the
initial attach stop, so always pick the lowest one (otherwise
multi-attach.exp regresses).
gdb/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* infcmd.c (attach_post_wait): If the target is always in non-stop
mode, and the UI is in all-stop mode, stop all threads and pick
the one with lowest number as current.
Pedro Alves [Mon, 30 Nov 2015 16:05:13 +0000 (16:05 +0000)]
Remote all-stop-on-top-of-non-stop
This is the first pass at implementing support for all-stop mode
running against the remote target using the non-stop variant of the
protocol.
The trickiest part here is the initial connection setup/synching. We
need to fetch all inferiors' target descriptions etc. before stopping
threads, because stop_all_threads needs to read the threads' registers
(to record each thread's stop_pc). But OTOH, the initial inferior
setup (target_post_attach, post_create_inferior, etc.), only works
correctly if the inferior is stopped... So I've split that initial
setup part from attach_command_post_wait to a separate function, and
added a "still needs setup" flag to the inferior structure. This is
similar to gdbserver/linux-low.c's handling of discovering the
process's target description). Then if on connection all threads of
the remote inferior are running, when we go about stopping them, as
soon as they stop we call setup_inferior, from within
stop_all_threads.
Also, in all-stop, we need to process all the initial stop replies to
learn about all the pending signal the threads may already be stopped
for, and pick the one to report as current. This is exposed by
gdb.threads/reconnect-signal.exp.
gdb/
2015-11-30 Pedro Alves <palves@redhat.com>
* gdbthread.h (switch_to_thread_no_regs): Declare.
* infcmd.c (setup_inferior): New function, factored out from ...
(attach_command_post_wait): ... this. Rename to ...
(attach_post_wait): ... this. Replace parameter async_exec with
attach_post_wait_mode parameter. Adjust.
(enum attach_post_wait_mode): New enum.
(struct attach_command_continuation_args): Replace 'async_exec'
field with 'mode' field.
(attach_command_continuation): Adjust.
(attach_command): Add comment. Mark the inferior as needing
setup. Adjust to use enum attach_post_wait_mode.
(notice_new_inferior): Use switch_to_thread_no_regs. Adjust to
use enum attach_post_wait_mode.
* inferior.h (setup_inferior): Declare.
(struct inferior) <needs_setup>: New field.
* infrun.c (set_last_target_status): Make extern.
(stop_all_threads): Make extern. Setup inferior, if necessary.
* infrun.h (set_last_target_status, stop_all_threads): Declare.
* remote-notif.c (remote_async_get_pending_events_handler)
(handle_notification): Replace non_stop checks with
target_is_non_stop_p() checks.
* remote.c (remote_notice_new_inferior): Remove non_stop check.
(remote_update_thread_list): Replace non_stop check with
target_is_non_stop_p() check.
(print_one_stopped_thread): New function.
(process_initial_stop_replies): New 'from_tty' parameter.
"Notice" all new live inferiors after storing initial stops as
pending status in each corresponding thread. If all-stop, stop
all threads, try picking a signalled thread as current, and print
the status of that one thread. Record the last target status.
(remote_start_remote): Replace non_stop checks with
target_is_non_stop_p() checks. Don't query for the remote current
thread of use qOffsets here. Pass from_tty to
process_initial_stop_replies.
(extended_remote_attach): Replace non_stop checks with
target_is_non_stop_p() checks.
(extended_remote_post_attach): Send qOffsets here.
(remote_vcont_resume, remote_resume, remote_stop)
(remote_interrupt, remote_parse_stop_reply, remote_wait): Replace
non_stop checks with target_is_non_stop_p() checks.
(remote_async): If target is non-stop, mark/clear the pending
events token.
* thread.c (switch_to_thread_no_regs): New function.
Pedro Alves [Mon, 30 Nov 2015 16:05:12 +0000 (16:05 +0000)]
Fix mi-nonstop.exp with extended-remote
Testing with "maint set target-non-stop on" makes mi-nonstop.exp run
with the extended-remote board. That reveals that mi-nonstop.exp is
using the wrong predicate to check for "using remote protocol".
This is not visible today because non-stop tests all fail to run with
extended-remote board, because they spawn gdb and then do "set
non-stop on". However, with that board, gdb connects to the gdbserver
from within mi_gdb_start, and changing non-stop when already connected
doesn't work. Fix that by instead enabling non-stop mode on gdb's
command line.
gdb/testsuite/ChangeLog:
2015-11-30 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-nonstop.exp: Append "set non-stop on" to GDBFLAGS
instead of issuing "-gdb-set non-stop 1" after starting gdb.
Use mi_is_target_remote instead of checking "is_remote target".
* lib/gdb.exp (gdb_is_target_remote): Rename to ...
(gdb_is_target_remote_prompt): ... this, and add 'prompt_regexp'
parameter.
(gdb_is_target_remote): Reimplement.
* lib/mi-support.exp (mi_is_target_remote): New procedure.
Pedro Alves [Mon, 30 Nov 2015 18:32:24 +0000 (18:32 +0000)]
Fix ChangeLog entry
There should be only one date in multi-author entries.
Andrew Burgess [Fri, 16 Oct 2015 09:58:02 +0000 (11:58 +0200)]
objdump: Handle 32-bit base address in debug_ranges / debug_loc.
When the DWARF address size is 32-bit, but the host machine is 64-bit,
objdump fails to spot base addresses specified in the .debug_ranges and
.debug_loc lists.
As an example, here is the output when dumping an example .debug_ranges
section with the pre-patched objdump:
Contents of the .debug_ranges section:
Offset Begin End
00000000 ffffffff 00000004 (start > end)
00000000 00000000 00000004
00000000 ffffffff 00000008 (start > end)
00000000 00000000 00000004
00000000 <End of list>
And this is what the same section looks like when dumped with the
patched version of objdump:
Contents of the .debug_ranges section:
Offset Begin End
00000000 ffffffff 00000004 (base address)
00000000 00000004 00000008
00000000 ffffffff 00000008 (base address)
00000000 00000008 0000000c
00000000 <End of list>
binutils/ChangeLog:
* dwarf.c (is_max_address): New function.
(display_loc_list): Remove out of date comment, use
is_max_address.
(display_debug_ranges): Likewise.
binutils/testsuite/ChangeLog:
* binutils-all/objdump.exp: Add test for .debug_ranges decode.
* binutils-all/dw2-ranges.S: New file.
* binutils-all/dw2-ranges.W: New file.
GDB Administrator [Mon, 30 Nov 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Cary Coutant [Sun, 29 Nov 2015 01:19:52 +0000 (17:19 -0800)]
Update my email address in MAINTAINERS.
binutils/
* MAINTAINERS: Update my email address.
GDB Administrator [Sun, 29 Nov 2015 00:00:07 +0000 (00:00 +0000)]
Automatic date update in version.in
Pedro Alves [Sat, 28 Nov 2015 16:39:32 +0000 (16:39 +0000)]
Adjust GDB to demangler API change
Before commit
3a8724032abf, DEMANGLE_COMPONENT_CAST was used for both
casts and conversion operators. We now have
DEMANGLE_COMPONENT_CONVERSION for the latter.
gdb/ChangeLog:
2014-11-28 Pedro Alves <palves@redhat.com>
* cp-name-parser.y (conversion_op): Use
DEMANGLE_COMPONENT_CONVERSION instead of DEMANGLE_COMPONENT_CAST.
Maxim Ostapenko [Sat, 28 Nov 2015 16:39:32 +0000 (16:39 +0000)]
libsanitizer merge from upstream r250806, compiler part.
gcc/
* asan.c (asan_emit_stack_protection): Don't pass local stack to
asan_stack_malloc_[n] anymore. Check if asan_stack_malloc_[n] returned
NULL and use local stack than.
(asan_finish_file): Insert __asan_version_mismatch_check_v[n] call
in addition to __asan_init.
* sanitizer.def (BUILT_IN_ASAN_INIT): Rename to __asan_init.
(BUILT_IN_ASAN_VERSION_MISMATCH_CHECK): Add new builtin call.
* asan.h (asan_intercepted_p): Handle new string builtins.
* ubsan.c (ubsan_use_new_style_p): New function.
(ubsan_instrument_float_cast): If location is unknown, assign
input_location to loc. Propagate loc to ubsan_create_data if
ubsan_use_new_style_p returned true.
config/
* bootstrap-asan.mk: Replace ASAN_OPTIONS=detect_leaks with
LSAN_OPTIONS=detect_leaks.
gcc/testsuite/
* c-c++-common/ubsan/float-cast-overflow-10.c: Adjust test.
* c-c++-common/ubsan/float-cast-overflow-8.c: Likewise.
* c-c++-common/ubsan/float-cast-overflow-9.c: Likewise.
* g++.dg/asan/default-options-1.C: Likewise.
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@229112
138bc75d-0d04-0410-961f-
82ee72b054a4
Rainer Orth [Sat, 28 Nov 2015 16:39:32 +0000 (16:39 +0000)]
Port libvtv to Solaris
libstdc++-v3:
* acinclude.m4 (GLIBCXX_ENABLE_VTABLE_VERIFY) <solaris2*>: Use
-Wl,-R in VTV_CXXLINKFLAGS.
* configure: Regenerate.
* testsuite/18_support/bad_exception/23591_thread-1.c: Use
-fvtable-verify=none on Solaris 12+.
libgcc:
* Makefile.in (VTV_CFLAGS): New variable.
(vtv_start$(objext), vtv_end$(objext), vtv_end$(objext))
(vtv_start_preinit$(objext), vtv_end_preinit$(objext)): Use it.
* config.host (*-*-solaris2*): Add t-crtstuff-pic to tmake_file.
Add vtv_start.o, vtv_end.o, vtv_start_preinit.o, vtv_end_preinit.o
to extra_parts if $enable_vtable_verify = yes.
libvtv:
* configure.tgt (*-*-solaris2.[1-9]*): Declare supported.
* configure.ac: Call AC_USE_SYSTEM_EXTENSIONS.
<*-*-solaris2*>: Check for init priority support.
Check for getexecname, __fortify_fail, _obstack_begin.
(VTV_NO_OBSTACK): New conditional.
* configure: Regenerate.
* Makefile.am [VTV_NO_OBSTACK] (obstack.c): Use new condition.
Create empty config.h
* Makefile.in: Regenerate.
* vtv_rts.cc [HAVE_GETEXECNAME] (program_invocation_name): New
variable.
(read_section_offset_and_length) [HAVE_GETEXECNAME]: Set it.
(dl_iterate_phdr_callback) [HAVE_GETEXECNAME]: Set it.
(__fortify_fail): Wrap in HAVE___FORTIFY_FAIL
[!HAVE___FORTIFY_FAIL]: Provide non-Cygwin implementation.
(read_section_offset_and_length): Assert sh_size >= VTV_PAGE_SIZE.
(iterate_modules): Fix typo.
Use VTV_PAGE_SIZE.
(dl_iterate_phdr_callback): Fix typo.
Use VTV_PAGE_SIZE.
(__VLTChangePermission): Fix typos.
include:
* vtv-change-permission.h (VTV_PAGE_SIZE) [__sun__ && __svr4__ &&
__sparc__]: Define.
gcc:
* config/sol2.h (SUPPORTS_INIT_PRIORITY): Move up.
(STARTFILE_VTV_SPEC, ENDFILE_VTV_SPEC): Define.
(STARTFILE_SPEC): Use %(startfile_vtv).
(ENDFILE_SPEC): Use %(endfile_vtv).
(SUBTARGET_EXTRA_SPECS): Handle STARTFILE_VTV_SPEC,
ENDFILE_VTV_SPEC.
* gcc.c (LINK_COMMAND_SPEC): Move VTABLE_VERIFICATION_SPEC after %{L*}.
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@230865
138bc75d-0d04-0410-961f-
82ee72b054a4
Rich Felker [Sat, 28 Nov 2015 16:39:31 +0000 (16:39 +0000)]
SH FDPIC backend support
gcc/ChangeLog
* config.gcc: Handle --enable-fdpic.
* config/sh/constraints.md (Ccl): New constraint.
* config/sh/linux.h (SUBTARGET_LINK_EMUL_SUFFIX): Handle -mfdpic.
* config/sh/sh-c.c (sh_cpu_cpp_builtins): Add __FDPIC__ and
__SH_FDPIC__.
* config/sh/sh-mem.cc (expand_block_move): Support FDPIC for calls
to library functions.
* config/sh/sh-protos.h (function_symbol_result): New struct.
(function_symbol): Return function_symbol_result.
(sh_get_fdpic_reg_initial_val, sh_load_function_descriptor): New
declarations.
* config/sh/sh.c (TARGET_ASM_INTEGER, sh_assemble_integer):
Implement target hook.
(TARGET_CANNOT_FORCE_CONST_MEM, sh_cannot_force_const_mem_p):
Likewise.
(sh_option_override): Force -fPIC if FDPIC is in effect.
(sh_asm_output_addr_const_extra): Add UNSPEC_GOTFUNCDESC and
UNSPEC_GOTOFFFUNCDESC cases.
(prepare_move_operands): Use FDPIC initial GOT register for
TLS-related GOT access; inhibit cross-section address offset
constants for FDPIC.
(sh_assemble_integer): New function.
(sh_cannot_copy_insn_p): Inhibit copying insns that are FDPIC
PC-relative call sites.
(expand_ashiftrt): Adapt invocation of function_symbol.
(sh_expand_prologue): Inhibit PC-relative GOT address load for
FDPIC.
(nonpic_symbol_mentioned_p): Add cases for UNSPEC_GOTFUNCDESC and
UNSPEC_GOTOFFFUNCDESC.
(legitimize_pic_address): Resolve function symbols to function
descriptors for FDPIC. Do not use GOT-relative addressing for
local data that may be read-only on FDPIC.
(sh_emit_storesi, sh_emit_storehi): New functions.
(sh_trampoline_init): Generate FDPIC trampolines.
(sh_function_ok_for_sibcall): Add TARGET_FDPIC check.
(sh_expand_sym_label2reg): Don't assume sibcalls are local.
(sh_output_mi_thunk): Generate FDPIC call.
(function_symbol): Return function_symbol_result. For
SFUNC_STATIC on FDPIC, generate call site labels to use
PC-relative addressing rather than GOT-relative addressing.
(sh_conditional_register_usage): Make PIC register fixed and call used
when FDPIC is in effect.
(sh_legitimate_constant_p): Impose FDPIC
constant constraints.
(sh_cannot_force_const_mem_p, sh_load_function_descriptor)
(sh_get_fdpic_reg_initial_val): New functions.
* config/sh/sh.h (SUBTARGET_ASM_SPEC, SUBTARGET_LINK_EMUL_SUFFIX):
Handle -mfdpic.
(FDPIC_SELF_SPECS, SUBTARGET_DRIVER_SELF_SPECS)
(PIC_OFFSET_TABLE_REG_CALL_CLOBBERED)
(SH_OFFSETS_MUST_BE_WITHIN_SECTIONS_P): New macros.
(DRIVER_SELF_SPECS): Add SUBTARGET_DRIVER_SELF_SPECS and
FDPIC_SELF_SPECS.
(TRAMPOLINE_SIZE): Select trampoline size for FDPIC.
(ASM_PREFERRED_EH_DATA_FORMAT): Add EH format constraints for
FDPIC.
(ASM_MAYBE_OUTPUT_ENCODED_ADDR_RTX): Handle FDPIC case.
* config/sh/sh.md (UNSPEC_GOTFUNCDESC, UNSPEC_GOTOFFFUNCDESC): New
constants.
(calli_fdpic, call_valuei_fdpic, sibcalli_fdpic)
(sibcalli_pcrel_fdpic, sibcall_pcrel_fdpic, sibcall_valuei_fdpic)
(sibcall_valuei_pcrel_fdpic, sibcall_value_pcrel_fdpic)
(sym2GOTFUNCDESC, symGOTFUNCDESC2reg, sym2GOTOFFFUNCDESC)
(symGOTOFFFUNCDESC2reg): New patterns.
(udivsi3_i1, udivsi3_i4, udivsi3_i4_single, udivsi3,
*divsi_inv_call_combine, divsi3_i4, divsi3_i4_single, divsi3)
(ashlsi3, ashlsi3_d_call, ashrsi3_n, lshrsi3, lshrsi3_d_call)
(calli, call_valuei, call, call_value, sibcalli, sibcalli_pcrel)
(sibcall_pcrel, sibcall, sibcall_valuei, sibcall_valuei_pcrel)
(sibcall_value_pcrel, sibcall_value, GOTaddr2picreg, symGOT_load)
(symGOTOFF2reg, block_move_real, block_lump_real)
(block_move_real_i4, block_lump_real_i4): Add support for FDPIC
calls.
(mulsi3, ic_invalidate_line, initialize_trampoline, call_pop,
call_value_pop): Adjust for new function_symbol signature.
* config/sh/sh.opt (-mfdpic): New option.
* doc/install.texi (Options specification): Document
--enable-fdpic.
* doc/invoke.texi (SH Options): Document -mfdpic.
include/ChangeLog:
* longlong.h (udiv_qrnnd): Add FDPIC compatible version for SH.
libitm/ChangeLog:
* config/sh/sjlj.S (_ITM_beginTransaction): Bypass PLT calling
GTM_begin_transaction for compatibility with FDPIC.
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@229438
138bc75d-0d04-0410-961f-
82ee72b054a4
Pedro Alves [Sat, 28 Nov 2015 16:39:31 +0000 (16:39 +0000)]
PR other/61321 - demangler crash on casts in template parameters
The fix for bug 59195:
[C++ demangler handles conversion operator incorrectly]
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=59195
unfortunately makes the demangler crash due to infinite recursion, in
case of casts in template parameters.
For example, with:
template<int> struct A {};
template <typename Y> void function_temp(A<sizeof ((Y)(999))>) {}
template void function_temp<int>(A<sizeof (int)>);
The 'function_temp<int>' instantiation above mangles to:
_Z13function_tempIiEv1AIXszcvT_Li999EEE
The demangler parses this as:
typed name
template
name 'function_temp'
template argument list
builtin type int
function type
builtin type void
argument list
template (*)
name 'A'
template argument list
unary operator
operator sizeof
unary operator
cast
template parameter 0 (**)
literal
builtin type int
name '999'
And after the fix for 59195, due to:
static void
d_print_cast (struct d_print_info *dpi, int options,
const struct demangle_component *dc)
{
...
/* For a cast operator, we need the template parameters from
the enclosing template in scope for processing the type. */
if (dpi->current_template != NULL)
{
dpt.next = dpi->templates;
dpi->templates = &dpt;
dpt.template_decl = dpi->current_template;
}
when printing the template argument list of A (what should be "<sizeof
(int)>"), the template parameter 0 (that is, "T_", the '**' above) now
refers to the first parameter of the the template argument list of the
'A' template (the '*' above), exactly what we were already trying to
print. This leads to infinite recursion, and stack exaustion. The
template parameter 0 should actually refer to the first parameter of
the 'function_temp' template.
Where it reads "for the cast operator" in the comment in d_print_cast
(above), it's really talking about a conversion operator, like:
struct A { template <typename U> explicit operator U(); };
We don't want to inject the template parameters from the enclosing
template in scope when processing a cast _expression_, only when
handling a conversion operator.
The problem is that DEMANGLE_COMPONENT_CAST is currently ambiguous,
and means _both_ 'conversion operator' and 'cast expression'.
Fix this by adding a new DEMANGLE_COMPONENT_CONVERSION component type,
which does what DEMANGLE_COMPONENT_CAST does today, and making
DEMANGLE_COMPONENT_CAST just simply print its component subtree.
I think we could instead reuse DEMANGLE_COMPONENT_CAST and in
d_print_comp_inner still do:
@@ -5001,9 +5013,9 @@ d_print_comp_inner (struct d_print_info *dpi, int options,
d_print_comp (dpi, options, dc->u.s_extended_operator.name);
return;
case DEMANGLE_COMPONENT_CAST:
d_append_string (dpi, "operator ");
- d_print_cast (dpi, options, dc);
+ d_print_conversion (dpi, options, dc);
return;
leaving the unary cast case below calling d_print_cast, but seems to
me that spliting the component types makes it easier to reason about
the code.
g++'s testsuite actually generates three symbols that crash the
demangler in the same way. I've added those as tests in the demangler
testsuite as well.
And then this fixes PR other/61233 too, which happens to be a
demangler crash originally reported to GDB, at:
https://sourceware.org/bugzilla/show_bug.cgi?id=16957
Bootstrapped and regtested on x86_64 Fedora 20.
Also ran this through GDB's testsuite. GDB will require a small
update to use DEMANGLE_COMPONENT_CONVERSION in one place it's using
DEMANGLE_COMPONENT_CAST in its sources.
libiberty/
2015-11-27 Pedro Alves <palves@redhat.com>
PR other/61321
PR other/61233
* demangle.h (enum demangle_component_type)
<DEMANGLE_COMPONENT_CONVERSION>: New value.
* cp-demangle.c (d_demangle_callback, d_make_comp): Handle
DEMANGLE_COMPONENT_CONVERSION.
(is_ctor_dtor_or_conversion): Handle DEMANGLE_COMPONENT_CONVERSION
instead of DEMANGLE_COMPONENT_CAST.
(d_operator_name): Return a DEMANGLE_COMPONENT_CONVERSION
component if handling a conversion.
(d_count_templates_scopes, d_print_comp_inner): Handle
DEMANGLE_COMPONENT_CONVERSION.
(d_print_comp_inner): Handle DEMANGLE_COMPONENT_CONVERSION instead
of DEMANGLE_COMPONENT_CAST.
(d_print_cast): Rename as ...
(d_print_conversion): ... this. Adjust comments.
(d_print_cast): Rewrite - simply print the left subcomponent.
* cp-demint.c (cplus_demangle_fill_component): Handle
DEMANGLE_COMPONENT_CONVERSION.
* testsuite/demangle-expected: Add tests.
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@231020
138bc75d-0d04-0410-961f-
82ee72b054a4
Mike Stump [Sat, 28 Nov 2015 16:39:31 +0000 (16:39 +0000)]
libiberty TAGS
* Makefile.in (etags tags TAGS): Use && instead of ;.
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@230270
138bc75d-0d04-0410-961f-
82ee72b054a4
Jason Merrill [Sat, 28 Nov 2015 16:39:30 +0000 (16:39 +0000)]
(Makefiles): PATCH to include libcpp and libiberty in GCC etags
gcc/c/
* Make-lang.in (c.tags): Also include libcpp TAGS.
gcc/cp/
* Make-lang.in (c++.tags): Also include libcpp TAGS.
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@229504
138bc75d-0d04-0410-961f-
82ee72b054a4
Iain Sandoe [Sat, 28 Nov 2015 16:39:30 +0000 (16:39 +0000)]
Fix PR63758 by using the _NSGetEnviron() API on Darwin
include/
Roland McGrath <roland@gnu.org>
PR other/63758
* environ.h: New file.
libiberty/
Roland McGrath <roland@gnu.org>
Iain Sandoe <iain@codesourcery.com>
PR other/63758
* pex-unix.c: Obtain the environment interface from settings in environ.h
rather than in-line code. Update copyright date.
* setenv.c: Likewise.
* xmalloc.c: Likewise.
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@228942
138bc75d-0d04-0410-961f-
82ee72b054a4
Jason Merrill [Sat, 28 Nov 2015 16:39:30 +0000 (16:39 +0000)]
Implement N4514, C++ Extensions for Transactional Memory.
gcc/
* builtins.def (BUILT_IN_ABORT): Add transaction_pure attribute.
gcc/c-family/
* c-common.c (c_common_reswords): Add C++ TM TS keywords.
(c_common_attribute_table): Add transaction_safe_dynamic.
transaction_safe now affects type identity.
(handle_tm_attribute): Handle transaction_safe_dynamic.
* c-common.h (enum rid): Add RID_ATOMIC_NOEXCEPT,
RID_ATOMIC_CANCEL, RID_SYNCHRONIZED.
(OBJC_IS_CXX_KEYWORD): Add RID_SYNCHRONIZED.
(D_TRANSMEM): New.
* c-cppbuiltin.c (c_cpp_builtins): Define __cpp_transactional_memory.
* c-pretty-print.c (pp_c_attributes_display): Don't print
transaction_safe in C++.
gcc/c/
* c-parser.c (c_lex_one_token): Handle @synchronized.
* c-decl.c (match_builtin_function_types): A declaration of a built-in
can change whether the function is transaction_safe.
gcc/cp/
* cp-tree.h (struct cp_declarator): Add tx_qualifier field.
(BCS_NORMAL, BCS_TRANSACTION): New enumerators.
* lex.c (init_reswords): Limit TM kewords to -fgnu-tm.
* parser.c (cp_lexer_get_preprocessor_token): Fix @synchronized.
(make_call_declarator): Take tx_qualifier.
(cp_parser_tx_qualifier_opt): New.
(cp_parser_lambda_declarator_opt): Use it.
(cp_parser_direct_declarator): Likewise.
(cp_parser_statement): Handle atomic_noexcept, atomic_cancel.
(cp_parser_compound_statement): Change in_try parameter to bcs_flags.
(cp_parser_std_attribute): Map optimize_for_synchronized to
transaction_callable.
(cp_parser_transaction): Take the token. Handle atomic_noexcept.
* lambda.c (maybe_add_lambda_conv_op): Handle transaction-safety.
* call.c (enum conversion_kind): Add ck_tsafe.
(standard_conversion): Handle transaction-safety conversion.
(convert_like_real, resolve_address_of_overloaded_function): Likewise.
(check_methods): Diagnose transaction_safe_dynamic on non-virtual
function.
(look_for_tm_attr_overrides): Don't inherit transaction_safe_dynamic.
* cvt.c (tx_safe_fn_type_p, tx_unsafe_fn_variant)
(can_convert_tx_safety): New.
* typeck.c (composite_pointer_type): Handle transaction-safety.
* name-lookup.h (enum scope_kind): Add sk_transaction.
* name-lookup.c (begin_scope): Handle it.
* semantics.c (begin_compound_stmt): Pass it.
* decl.c (check_previous_goto_1): Check it.
(struct named_label_entry): Add in_transaction_scope.
(poplevel_named_label_1): Set it.
(check_goto): Check it.
(duplicate_decls): A specialization can be transaction_safe
independently of its template.
(grokdeclarator): Handle tx-qualifier.
* rtti.c (ptr_initializer): Handle transaction-safe.
* search.c (check_final_overrider): Check transaction_safe_dynamic.
Don't check transaction_safe.
* mangle.c (write_function_type): Mangle transaction_safe here.
(write_CV_qualifiers_for_type): Not here.
(write_type): Preserve transaction_safe when stripping attributes.
* error.c (dump_type_suffix): Print transaction_safe.
libiberty/
* cp-demangle.c (d_cv_qualifiers): Dx means transaction_safe.
(cplus_demangle_type): Let d_cv_qualifiers handle it.
(d_dump, d_make_comp, has_return_type, d_encoding)
(d_count_templates_scopes, d_print_comp_inner)
(d_print_mod_list, d_print_mod, d_print_function_type)
(is_ctor_or_dtor): Handle DEMANGLE_COMPONENT_TRANSACTION_SAFE.
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@228462
138bc75d-0d04-0410-961f-
82ee72b054a4
Mikhail Maltsev [Sat, 28 Nov 2015 16:39:29 +0000 (16:39 +0000)]
Fix several crashes of C++ demangler on fuzzed input.
libiberty/
* cp-demangle.c (d_dump): Fix syntax error.
(d_identifier): Adjust type of len to match d_source_name.
(d_expression_1): Fix out-of-bounds access. Check code variable for
NULL before dereferencing it.
(d_find_pack): Do not recurse for FIXED_TYPE, DEFAULT_ARG and NUMBER.
(d_print_comp_inner): Add NULL pointer check.
* cp-demangle.h (d_peek_next_char): Define as inline function when
CHECK_DEMANGLER is defined.
(d_advance): Likewise.
* testsuite/demangle-expected: Add new testcases.
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@225727
138bc75d-0d04-0410-961f-
82ee72b054a4
Uros Bizjak [Sat, 28 Nov 2015 16:39:29 +0000 (16:39 +0000)]
Avoid "enum conversion when passing argument 1 of 'getrusage' is invalid in C++" warning
* getruntime.c (RUSAGE_SELF): Define if not already defined.
(get_runtime): Use RUSAGE_SELF as argument 1 of getrusage call.
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@225614
138bc75d-0d04-0410-961f-
82ee72b054a4
Uros Bizjak [Sat, 28 Nov 2015 16:39:29 +0000 (16:39 +0000)]
Avoid "enum conversion when passing argument 1 of 'getrusage' is invalid in C++" warning
* getruntime.c (get_run_time) [__USE_GNU]: Use RUSAGE_SELF as
argument 1 of getrusage call.
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@225534
138bc75d-0d04-0410-961f-
82ee72b054a4
GDB Administrator [Sat, 28 Nov 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Matthew Wahab [Fri, 27 Nov 2015 16:32:21 +0000 (16:32 +0000)]
[AArch64][PATCH 3/3] Add floating-point FP16 instructions
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the ARMv8 FP support. This patch adds the new FP16 instructions,
making them available when the architecture extension +fp+fp16 is
specified.
The instructions added are:
- Comparisons and conditionals: FCMP, FCCMPE, FCMP, FCMPE and FCSEL.
- Arithmetic: FABS, FNEG, FSQRT, FMUL, FDIV, FADD, FSUB, FMADD, FMSUB,
FNMADD and FNMSUB.
- Rounding: FRINTN, FRINTP, FRINTM, FRINTZ, FRINTA, FRINTX and FRINTI.
- Conversions: SCVTF (fixed-point), SCVTF (integer), UCVTF (fixed-point)
UCVTF (integer), FCVTZS (fixed-point), FCVTZS (integer), FCVTZU
(fixed-point), FCVTZU (integer), FCVTNS, FCVTNU, FCVTAS, FCVTAU,
FCVTPS, FCVTPU, FCVTMS and FCVTMU.
- Scalar FMOV: immediate, general and register
gas/testsuite/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/float-fp16.d: New.
* gas/aarch64/float-fp16.s: New.
opcodes/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (QL_FIX2FP_H, QL_FP2FIX_H): New.
(QL_INT2FP_H, QL_FP2INT_H): New.
(QL_FP2_H, QL_FP3_H, QL_FP4_H): New
(QL_DST_H): New.
(QL_FCCMP_H): New.
(aarch64_opcode_table): Add 16-bit variants of scvt, ucvtf,
fcvtzs, fcvtzu, fcvtns, fcvtnu, scvtf, ucvtf, fcvtas, fcvtau,
fmov, fcvtpos, fcvtpu, fcvtms, fcvtmu, fcvtzs, fcvtzu, fccmp,
fccmpe, fcmp, fcmpe, fabs, fneg, fsqrt, frintn, frintp, frintm,
frintz, frinta, frintx, frinti, fmul, fdiv, fadd, fsub, fmax,
fmin, fmaxnm, fminnm, fnmul, fmadd, fmsub, fnmadd, fnmsub and
fcsel.
Change-Id: Ie6d40bd1b215a9bc024e12ba75e52afbe1675eb7
Matthew Wahab [Fri, 27 Nov 2015 16:25:52 +0000 (16:25 +0000)]
[AArch64][PATCH 2/3] Adjust a utility function for floating point values.
ARMv8.2 adds 16-bit floating point operations as an optional
extension. This patch adjusts the utility function expand_fp_imm to
support 16-bit values.
The function is intended to convert an 8-bit immediate representing a
floating point value to a representation that can be passed to
fprintf. Because of the limited use of the results, the only change made
to the function is to treat a request for a 16-bit float as a request
for a 32-bit float.
opcodes/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (half_conv_t): New.
(expand_fp_imm): Replace is_dp flag with the parameter size to
specify the number of bytes for the required expansion. Treat
a 16-bit expansion like a 32-bit expansion. Add check for an
unsupported size request. Update comment.
(aarch64_print_operand): Update to support 16-bit floating point
values. Update for changes to expand_fp_imm.
Change-Id: I1ae3df3864be375d71925197ab03397ed1ad2d15
Matthew Wahab [Fri, 27 Nov 2015 15:47:53 +0000 (15:47 +0000)]
[AArch64][PATCH 1/3] Support ARMv8.2 FP16 floating point instructions.
ARMv8.2 adds 16-bit floating point operations as an optional extension
to the ARMv8 FP support. This patch set adds support for the 16-bit FP
instructions to binutils, enabling the instructions when both +fp and
+fp16 architecture extensions are enabled.
The patches in this series:
- Add a feature macro for use by the encoding/decoding mechanism.
- Adjust a utility function, used when disassembling, to support 16-bit
floating point values.
- Add the new scalar floating-point instructions.
This patch adds the feature macro FP_F16 to the AArch64 encoding/decoding
mechanism, enabling it when both +fp and +fp16 are selected.
opcodes/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-tbl.h (aarch64_feature_fp_f16): New.
(FP_F16): New.
Change-Id: Ie370e43e3d77a7d54b4416b4be901b363a37f3d5
Matthew Wahab [Fri, 27 Nov 2015 15:39:12 +0000 (15:39 +0000)]
[AArch64] Add ARMv8.2 instruction alias REV64.
This patch adds the alias REV64 <Rd>, <Rs> as an alias for REV <Rd>,
<Rs>. However, REV is still the preferred form for the instruction.
gas/testsuite/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/alias-2.d: Add tests for REV.
* gas/aarch64/alias-2.s: Likewise.
opcodes/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
* aarch64-tbl.h (aarchr64_opcode_table): Update "rev", add
"rev64".
Change-Id: I331567c8d3618ba9fec1673c6e0b5977222dde61
Matthew Wahab [Fri, 27 Nov 2015 15:25:08 +0000 (15:25 +0000)]
[AArch64] Add ARMv8.2 instructions BFC and REV64.
ARMv8.2 adds two new instructions: BFC as an alias for BFM and REV64 as
an alias for REV. This patch set adds support for these to binutils,
enabled when the -march=armv8.2-a is given. It depends on the support
for an instruction being its preferred form which was added in an
earlier patch.
This patch adds the alias BFC <Rd>, #<imm>, #<width> as the preferred
form for BFM when the source is a zero register and the conditions for
using the BFI form are met (in other words, BFC is the preferred form
for BFI <Rd>, <Rs>, #<imm>, #<width> when the <Rs> is a zero register).
gas/testsuite/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/alias-2.d: New.
* gas/aarch64/alias-2.s: New.
include/opcode/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (aarch64_op): Add OP_BFC.
opcodes/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-asm.c (convert_bfc_to_bfm): New.
(convert_to_real): Add case for OP_BFC.
* aarch64-dis-2.c: Regenerate.
* aarch64-dis.c: (convert_bfm_to_bfc): New.
(convert_to_alias): Add case for OP_BFC.
* aarch64-opc-2.c: Regenerate.
* aarch64-opc.c (operand_general_constraint_met_p): Weaken assert
to allow width operand in three-operand instructions.
* aarch64-tbl.h (QL_BF1): New.
(aarch64_feature_v8_2): New.
(ARMV8_2): New.
(aarch64_opcode_table): Add "bfc".
Change-Id: I6efe318b2538ba11f0caece7c6d70957441c872b
Simon Marchi [Fri, 27 Nov 2015 15:14:42 +0000 (10:14 -0500)]
remote.c: Add missing cast
Fixes in C++:
/home/emaisin/src/binutils-gdb/gdb/remote.c: In function ‘void start_thread(gdb_xml_parser*, const gdb_xml_element*, void*, VEC_gdb_xml_value_s*)’:
/home/emaisin/src/binutils-gdb/gdb/remote.c:2975:59: error: invalid conversion from ‘void*’ to ‘const char*’ [-fpermissive]
item.name = attr != NULL ? (char *) xstrdup (attr->value) : NULL;
^
In file included from /home/emaisin/src/binutils-gdb/gdb/common/common-defs.h:64:0,
from /home/emaisin/src/binutils-gdb/gdb/defs.h:28,
from /home/emaisin/src/binutils-gdb/gdb/remote.c:22:
/home/emaisin/src/binutils-gdb/gdb/../include/libiberty.h:323:14: error: initializing argument 1 of ‘char* xstrdup(const char*)’ [-fpermissive]
extern char *xstrdup (const char *) ATTRIBUTE_MALLOC ATTRIBUTE_RETURNS_NONNULL;
^
make[2]: *** [remote.o] Error 1
gdb/ChangeLog:
* remote.c (start_thread): Add cast.
Matthew Wahab [Fri, 27 Nov 2015 15:02:26 +0000 (15:02 +0000)]
[AArch64] Let aliased instructions be their preferred form.
Although the AArch64 backend supports aliased instructions, the aliasing
forms are always preferred over the real instruction. This makes it
awkward to handle instructions which have aliases but which are their
own preferred form.
This patch includes the instruction being aliased in the list of
alternatives which is searched when considering which form to use.
opcodes/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-dis.c: Weaken assert.
* aarch64-gen.c: Include the instruction in the list of its
possible aliases.
Change-Id: I1f23eb25fccef76a64d3d732d58761bd25fad94e
Yao Qi [Fri, 27 Nov 2015 14:53:32 +0000 (14:53 +0000)]
[AArch64] Only check breakpoint alignment on inserting
This patch fixes the GDB internal error on AArch64 when running
watchpoint-fork.exp
top?bt 15
internal_error (file=file@entry=0x79d558 "../../binutils-gdb/gdb/linux-nat.c", line=line@entry=4866, fmt=0x793b20 "%s: Assertion `%s' failed.")
at ../../binutils-gdb/gdb/common/errors.c:51
#1 0x0000000000495bc4 in linux_nat_thread_address_space (t=<optimized out>, ptid=<error reading variable: Cannot access memory at address 0x1302>)
at ../../binutils-gdb/gdb/linux-nat.c:4866
#2 0x00000000005db2c8 in delegate_thread_address_space (self=<optimized out>, arg1=<error reading variable: Cannot access memory at address 0x1302>)
at ../../binutils-gdb/gdb/target-delegates.c:2447
#3 0x00000000005e8c7c in target_thread_address_space (ptid=<error reading variable: Cannot access memory at address 0x1302>)
at ../../binutils-gdb/gdb/target.c:2727
#4 0x000000000054eef8 in get_thread_arch_regcache (ptid=..., gdbarch=0xad51e0) at ../../binutils-gdb/gdb/regcache.c:529
#5 0x000000000054efcc in get_thread_regcache (ptid=...) at ../../binutils-gdb/gdb/regcache.c:546
#6 0x000000000054f120 in get_thread_regcache_for_ptid (ptid=...) at ../../binutils-gdb/gdb/regcache.c:560
#7 0x00000000004a2278 in aarch64_point_is_aligned (is_watchpoint=0, addr=34168, len=2) at ../../binutils-gdb/gdb/nat/aarch64-linux-hw-point.c:122
#8 0x00000000004a2e68 in aarch64_handle_breakpoint (type=hw_execute, addr=34168, len=2, is_insert=0, state=0xae8880)
at ../../binutils-gdb/gdb/nat/aarch64-linux-hw-point.c:465
#9 0x000000000048edf0 in aarch64_linux_remove_hw_breakpoint (self=<optimized out>, gdbarch=<optimized out>, bp_tgt=<optimized out>)
at ../../binutils-gdb/gdb/aarch64-linux-nat.c:657
#10 0x00000000005da8dc in delegate_remove_hw_breakpoint (self=<optimized out>, arg1=<optimized out>, arg2=<optimized out>)
at ../../binutils-gdb/gdb/target-delegates.c:492
#11 0x0000000000536a24 in bkpt_remove_location (bl=<optimized out>) at ../../binutils-gdb/gdb/breakpoint.c:13065
#12 0x000000000053351c in remove_breakpoint_1 (bl=0xb3fe70, is=is@entry=mark_inserted) at ../../binutils-gdb/gdb/breakpoint.c:4026
#13 0x000000000053ccc0 in detach_breakpoints (ptid=...) at ../../binutils-gdb/gdb/breakpoint.c:3930
#14 0x00000000005a3ac0 in handle_inferior_event_1 (ecs=0x7ffffff048) at ../../binutils-gdb/gdb/infrun.c:5042
After the fork, GDB will physically remove the breakpoints from the child
process (in frame #14), but at that time, GDB doesn't create an inferior
yet for child, but inferior_ptid is set to child's ptid (in frame #13).
In aarch64_point_is_aligned, we'll get the regcache of current_lwp_ptid
to determine if the current process is 32-bit or 64-bit, so the inferior
can't be found, and the internal error is caused.
I don't find a better fix other than not checking alignment on removing
breakpoint.
gdb:
2015-11-27 Yao Qi <yao.qi@linaro.org>
* nat/aarch64-linux-hw-point.c (aarch64_dr_state_remove_one_point):
Don't assert on alignment.
(aarch64_handle_breakpoint): Only check alignment when IS_INSERT
is true.
Yao Qi [Fri, 27 Nov 2015 14:50:30 +0000 (14:50 +0000)]
New test gdb.arch/arm-neon.exp
Both ARM and AArch64 have defined some SIMD data types in arm_neon.h,
but we don't have a test case for passing them and returning them in
inferior call. This test also covers passing and returning
homogeneous short vector aggregate (defined by AArch64 ABI document)
in inferior call too.
gdb/testsuite:
* gdb.arch/arm-neon.exp: New.
* gdb.arch/arm-neon.c: New.
Yao Qi [Fri, 27 Nov 2015 14:50:30 +0000 (14:50 +0000)]
[AArch64] Handle HFA and HVA together
AArch64 AAPCS defined HFA (homogeneous floating-point aggregate)
and HVF (homogeneous short vector aggregate), bug GDB only handles the
former. In the AAPCS doc, both types are treated exactly the same
in terms of alignment and passing locations (on registers or stack).
This patch is to extend is_hfa to handle both HFA and HVA.
gdb:
2015-11-27 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (is_hfa): Rename to ...
(is_hfa_or_hva): ... this. Handle vector type. All callers
updated.
(aarch64_extract_return_value): Update debugging message.
(aarch64_store_return_value): Likewise.
(aarch64_return_in_memory): Update comments.
Yao Qi [Fri, 27 Nov 2015 14:50:30 +0000 (14:50 +0000)]
[AArch64] Support gnu vector in inferior call
As defined in AArch64 AAPCS, short vectors are passed through V
registers, and its maximum alignment is 16-byte. This patch is
to reflect these rules in GDB. This patch fixes some fails in
gdb.base/gnu_vector.exp.
gdb:
2015-11-27 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_type_align): For vector type, return
its length, but with the maximum of 16 bytes.
(is_hfa): Return zero for vector type.
(aarch64_push_dummy_call): Handle short vectors.
(aarch64_extract_return_value): Likewise.
(aarch64_store_return_value): Likewise.
Yao Qi [Fri, 27 Nov 2015 14:15:49 +0000 (14:15 +0000)]
Use multi_line to make pattern more human readable
gdb/testsuite:
2015-11-27 Yao Qi <yao.qi@linaro.org>
* gdb.cp/annota2.exp: Rewrite the pattern using multi_line.
Yao Qi [Fri, 27 Nov 2015 14:21:47 +0000 (14:21 +0000)]
Allow multiple occurrences of the frames-invalid annotation in gdb.cp/annota2.exp
Hi,
I see one fail on aarch64-linux testing,
FAIL: gdb.cp/annota2.exp: watch triggered on a.x (timeout)
because GDB prints two frames-invalid annotation but the test expects
only one.
next^M
^M
^Z^Zpost-prompt^M
^M
^Z^Zstarting^M
^M
^Z^Zframes-invalid^M
^M
^Z^Zframes-invalid^M
^M
Note I also see the fail on Debian-s390x-m64 too.
https://sourceware.org/ml/gdb-testers/2015-q4/msg07291.html
The test shouldn't only expect one frames-invalid annotation, because
there can be multiple times of stop/resume before the user visible
stop. Ulrich did something similar before
https://www.sourceware.org/ml/gdb-patches/2009-06/msg00118.html
This patch only changes ${frames_invalid} to \(${frames_invalid}\)*
in the regexp pattern.
The patch below fixes the fail on aarch64-linux.
gdb/testsuite:
2015-11-27 Yao Qi <yao.qi@linaro.org>
* gdb.cp/annota2.exp: Allow multiple occurrences of the
frames-invalid annotation.
Yao Qi [Fri, 27 Nov 2015 14:21:47 +0000 (14:21 +0000)]
Use ${frames_invalid} in gdb.cp/annota2.exp
Variable frames_invalid was defined, but wasn't used much. This patch
is to replace the literals in the regexp with ${frames_invalid}.
gdb/testsuite:
2015-11-27 Yao Qi <yao.qi@linaro.org>
* gdb.cp/annota2.exp: Use ${frames_invalid}.
Matthew Wahab [Fri, 27 Nov 2015 13:44:10 +0000 (13:44 +0000)]
[Aarch64] Support an ARMv8.2 system register.
ARMv8.2 adds a new system register id_aa64mmfr2_el1. This patch adds
support for the register to binutils, making it available when
-march=armv8.2-a is selected.
opcodes/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64-opc.c (aarch64_sys_regs): Add "id_aa64mmfr2_el1".
(aarch64_sys_reg_supported_p): Add ARMv8.2 system register
feature test.
gas/testsuite/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* gas/aarch64/sysreg-2.d: New.
* gas/aarch64/sysreg-2.s: New.
Change-Id: I767f18a60e2bd70ce74c89f6abfe07afdc9e601f
Matthew Wahab [Fri, 27 Nov 2015 13:19:50 +0000 (13:19 +0000)]
[AArch64] Add feature flags and command line for ARMv8.2 FP16 support.
ARMv8.2 adds optional support for 16-bit operations to the FP and
Adv.SIMD instructions. This patch adds a feature macro for this support
with a new command line option "+fp16" to enable/disable it.
Although the command line option is added as an architecture extension,
it only affects instructions available with when +fp or +simd is
enabled. If +fp16 is specified then it will also enable +fp.
There are currently no FP16 instructions implemented in binutils, this
patch is to enable subsequent work on supporting the extension.
gas/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* config/tc-aarch64.c (aarch64_features): Add "fp16".
* doc/c-aarch64.texi (Architecture Extensions): Add "fp16".
include/opcode/
2015-11-27 Matthew Wahab <matthew.wahab@arm.com>
* aarch64.h (AARCH64_FEATURE_F16): New.
(AARCH64_ARCH_V8_2): Add AARCH64_FEATURE_F16 to ARMv8.2
features.
Change-Id: Id2021e0513946e16d0935c2a5b9605574cdff95a
GDB Administrator [Fri, 27 Nov 2015 00:00:08 +0000 (00:00 +0000)]
Automatic date update in version.in
Simon Marchi [Thu, 26 Nov 2015 20:49:46 +0000 (15:49 -0500)]
Adjust ChangeLog entry
Par Olsson was the original author of the fix, so change the name in the
ChangeLog to give him the credit.
Simon Marchi [Thu, 26 Nov 2015 14:49:04 +0000 (09:49 -0500)]
Add test for thread names
I couldn't find a test that verified the thread name functionality, so I
created a new one.
A target board can define gdb,no_thread_names if it doesn't support thread
names and wants to skip the tests that uses them.
This test has been made with Linux in mind. Not all platforms use
pthread_setname_np to set the thread name, but some #ifdefs can be added
later in order to support other platforms.
Tested on x86-64 Ubuntu 14.04, native and remote.
gdb/testsuite/ChangeLog:
* gdb.threads/names.exp: New file.
* gdb.threads/names.c: New file.
* README: Mention gdb,no_thread_names.
projects / binutils-gdb.git / log