radeonsi: convert SPI state to an atom

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

gallium/radeon: rename r600_context_bo_reloc -> radeon_add_to_buffer_list

this name should be easy to understand without other knowledge

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

gallium/radeon: rename write_*_reg functions

e.g. radeon_set_context_reg is nicer and looks consistent next to
radeon_emit().

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeonsi: rename and precalculate polygon offset states

one less calloc and state construction while drawing

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeonsi: convert CB_TARGET_MASK setup to an atom

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeonsi: don't set VGT_VTX_CNT_EN twice in init_config

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeonsi: convert stencil ref state into an atom

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeonsi: convert blend color state into an atom

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeonsi: convert sample mask state into an atom

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeonsi: convert clip state into an atom

Reducing calloc overhead.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeonsi: avoid redundant CB and DB register updates

The main idea is to avoid setting CB_COLORi_INFO = 0 for i>0 repeatedly
when those colorbuffers aren't used. This is mainly for glamor.

Same for DB. Z_INFO and STENCIL_INFO need to be cleared only once.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeonsi: don't rebind GSVS ring buffers every draw call using GS

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeonsi: don't clear the tessellation factor ring buffer

Leftover from the bring-up.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeonsi: remove the tf_ring state, add the registers to init_config

One less state to worry about.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeonsi: remove the gs_rings state, add the registers to init_config

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeonsi: use a bitmask for tracking dirty atoms

This mainly removes the cache misses when checking the dirty flags.
Not much else though.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeonsi: initialize atom IDs for external atoms

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeonsi: call si_init_atom for remaining radeonsi atoms

I need to initialize more atom IDs.

This adds 4 more si_init_atom calls, which simplifies the code.
(si_init_atom needs a different context type of the emit functions though)

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeonsi: initialize atom IDs

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeonsi: define the state atom array separately

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeonsi: optimize viewport states

same as scissors

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeonsi: optimize scissor states

- convert 16 states to 1 atom
- only emit 1 scissor if VIEWPORT_INDEX isn't written
- use only one packet when emitting consecutive scissors

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeonsi: add SI_MAX_ATTRIBS

PIPE_MAX_ATTRIBS is 32, but we currently only support 16.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeonsi: fix memory usage checking for big IBs

Cc: 11.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeonsi: set all 16 viewport Z bounds for GL 4.1

Cc: 11.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

radeonsi: fix a Unigine Heaven hang when drirc is missing

Cc: 10.6 11.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

winsys/amdgpu: use small IBs for better performance on VI

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

gallium/util: add u_bit_scan_consecutive_range

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>

i965: Prevent coordinate overflow in intel_emit_linear_blit

Fixes regression from
commit 8c17d53823c77ac1c56b0548e4e54f69a33285f1
Author: Kenneth Graunke <kenneth@whitecape.org>
Date:   Wed Apr 15 03:04:33 2015 -0700

    i965: Make intel_emit_linear_blit handle Gen8+ alignment restrictions.

which adjusted the coordinates to be relative to the nearest cacheline.
However, this then offsets the coordinates by up to 63 and this may then
cause them to overflow the BLT limits. For the well aligned large
transfer case, we can use 32bpp pixels and so reduce the coordinates by
4 (versus the current 8bpp pixels). We also have to be more careful
doing the last line just in case it may exceed the coordinate limit.

Reported-and-tested-by: kaillasse91@hotmail.fr
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90734
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Ian Romanick <ian.d.romanick@intel.com>
Cc: Anuj Phogat <anuj.phogat@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

i965/nir: enable the dead control flow optimization

total instructions in shared programs: 7541551 -> 7541381 (-0.00%)
instructions in affected programs:     3054 -> 2884 (-5.57%)
helped:                                29

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

nir/dead_cf: add support for removing useless loops

v2: fix detecting if the loop has any phi nodes after it.
v2: use nir_foreach_ssa_def() instead of nir_foreach_dest() when
    checking for values live after the loop to catch const_load
    instructions.
v2: fix handling return instructions
v2: add some documentation to loop_is_dead()

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>

nir: add a helper for iterating over blocks in a cf node

We were already doing this internally for iterating over a function
implementation, so just expose it directly.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

nir: add nir_block_get_following_loop() helper

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

nir/dead_cf: delete code that's unreachable due to jumps

v2: use nir_cf_node_remove_after().
v2: use foreach_list_typed() instead of hardcoding a list walk.
v3: update to new control flow modification helpers.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

nir: add an optimization for removing dead control flow

v2: use nir_cf_node_remove_after() instead of our own broken thing.
v3: use the new control flow modification helpers.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

r600g: fix calculation for gpr allocation

I've been chasing a geom shader hang on rv635 since I wrote
r600 geom code, and finally I hacked some values from fglrx
in and I could run texelfetch without failures.

This is totally my fault as well, maths fail 101.

This makes geom shaders on r600 not fail heavily.

Cc: "10.6" "11.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

mesa: Limit Framebuffer Parameter OpenGL ES 3.1 usage

According to OpenGL ES 3.1 specification, section 9.2.1 for
glFramebufferParameter and section 9.2.3 for glGetFramebufferParameteriv:

"An INVALID_ENUM error is generated if pname is not FRAMEBUFFER_DEFAULT_WIDTH,
FRAMEBUFFER_DEFAULT_HEIGHT, FRAMEBUFFER_DEFAULT_SAMPLES, or
FRAMEBUFFER_DEFAULT_FIXED_SAMPLE_LOCATIONS."

Therefore exclude OpenGL ES 3.1 from using the GL_FRAMEBUFFER_DEFAULT_LAYERS
parameter.

Signed-off-by: Marta Lofstedt <marta.lofstedt@intel.com>
Reviewed-by: Kevin Rogovin <kevin.rogovin at intel.com>

mesa: Expose GL_ARB_framebuffer_no_attachments to GLES 3.1

V2: Conform to new standard for exposing enums for OpenGL ES 3.1.

Signed-off-by: Marta Lofstedt <marta.lofstedt@intel.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

nir/builder: Use nir_after_instr to advance the cursor

This *should* ensure that the cursor gets properly advanced in all cases.
We had a problem before where, if the cursor was created using
nir_after_cf_node on a non-block cf_node, that would call nir_before_block
on the block following the cf node.  Instructions would then get inserted
in backwards order at the top of the block which is not at all what you
would expect from nir_after_cf_node.  By just resetting to after_instr, we
avoid all these problems.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: advertise ASTC support for Skylake

v2: remove OES ASTC extension reference.

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>

mesa/glformats: recognize ASTC formats as color formats

ASTC formats contain RGBA components.

Reviewed-by: Chad Versace <chad.versace@intel.com>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>

mesa/texformat: use format conversion function in _mesa_choose_tex_format

This function's cases for non-generic compressed formats duplicate
the GL to MESA translation in _mesa_glenum_to_compressed_format().
This patch replaces the switch cases with a call to the translation
function. This change teaches this function about ASTC, thus enabling
ASTC for glTex*Storage*() calls.

Reviewed-by: Chad Versace <chad.versace@intel.com>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>

mesa/texcompress: correct mapping of S3TC formats in conversion function

MESA_FORMAT_RGBA_DXT5 should actually be reserved for GL_RGBA[4]_DXT5_S3TC.
Also, Gallium and other dri drivers (radeon and nouveau) follow this mapping
scheme.

Reviewed-by: Chad Versace <chad.versace@intel.com>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>

r600/sb: update last_cf for finalize if.

As Glenn did for finalize_loop we need to update_cf when we
add a POP at the end of a shader.

I think this fixes one of the earlier shader going off end
of memory problems we've stopped.

Reviewed-by: Glenn Kennard <glenn.kennard@gmail.com>
Cc: "10.6" "11.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

i965/fs: Use greater-equal cmod to implement maximum.

The docs specifically call out SEL with .l and .ge as the
implementations of MIN and MAX respectively. Among other things,
SEL with these conditional mods are commutative.

See commit 3b7f683f.

Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

i965/chv|skl: Apply sampler bypass w/a

Certain compressed formats require this setting. The docs don't go into much
detail as to why it's needed exactly.

This patch introduces no piglit regressions on gen9 (bsw is untested). Note that
the SKL "regressions" are fixed tests, and the egl_khr_gl_colorspace tests are
WTF. The patch also fixes nothing I can find.
http://otc-mesa-ci.jf.intel.com/job/Leeroy/127820/

v2:
Reworded commit message (Matt); Added piglit results link.
Restructured condition (Matt)
Moved check out to function (Nanley). I left the setting of the bit in the
  surface state open coded because it seems to go better with the existing code.

v3:
Use and inline function only in gen8_emit_texture_surface_state() (Matt).

Cc: Matt Turner <mattst88@gmail.com>
Cc: Nanley Chery <nanleychery@gmail.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Matt Turner <mattst88@gmail.com>

st/mesa: move to renumbering registers in a group

This can be done with a single pass for the instruction base,
and takes renumber_registers out of its spot on the profile.

Acked-by: Marek Olšák <marek.olsak@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>

st/mesa: reduce time spent in calculating temp read/writes

The glsl->tgsi convertor does some temporary register reduction
however in profiling shader-db this shows up quite highly,

so optimise things to reduce the number of loops through
all the instructions we do. This drops merge_registers
from 4-5% on the profile to 1%. I think this can be reduced
further by possibly optimising the renumber pass.

Acked-by: Marek Olšák <marek.olsak@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>

st/mesa: cache tgsi opcode info in the instruction

Instead of looking this up lots, lets just cache it in the instruction
translation up front. I just noticed this function what high in a profile
of shader-db on radeonsi.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

r600: move prim convert from geom shader to function.

This should avoid C++ fail including this header.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

glsl: remove specical case subroutine type counting

Unlike samplers we can get the correct value for subroutines from
component_slots()

Reviewed-by: Dave Airlie <airlied@redhat.com>

r600g: Use TGSI parse results instead of manually exfiltrating

This makes better use of the work that the TGSI API has done for
us.

Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>

r600g: Set geometry properties in r600_create_shader_state()

The selector is shared by all shader variants, so the
individual shaders shouldn't change it. Use tgsi_shader_scan()
results to set geometry properties within a
r600_create_shader_state() call and treat said propertices in
the selector as read-only within r600_shader_from_tgsi().

Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>

r600g: Move geometry properties state from shader to selector

Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>

r600g: Remove dead assigment to 'gs_input_prim' in shader state

Note that 'geometry shader properties' should be carried in the
selector state over the shader state in any case.

Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: don't use the emit qt keyword in si_init_atom

It confuses my editor.

radeonsi: remove no-op 32-bit masking

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

gallium/radeon: fix the ADDRESS_HI mask for EVENT_WRITE CIK packets

Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

winsys/radeon: handle non-zero finite timeout when waiting for buffers

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

freedreno/a3xx: implement half-z clipping

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

freedreno/a3xx: add basic clip plane support

The hardware is capable of dealing with GL1-style user clip planes.
No clip vertex, no clip distances. Fixes a number of ucp tests, as well
as neverball.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "11.0" <mesa-stable@lists.freedesktop.org>

nvc0: change prefix of MP performance counters to HW_SM

According to NVIDIA, local performance counters (MP) are prefixed
with SM, while global performance counters (PCOUNTER) are called PM.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

nvc0: sort performance counter queries by name

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

nvc0: make names of performance counter queries consistent

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

nvc0: use enumerations for driver queries

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

nvc0: remove commented out code related to PCOUNTER queries

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

r600: port si_conv_prim_to_gs_out from radeonsi

This code was broken by the tess merge, and I totally missed it
until now. I'm not sure this fixes anything but it stops the assert.

Cc: "11.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Glenn Kennard <glenn.kennard@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

r600g: use PRIi64 for some compute debug printfs

Otherwise this will crash on 32-bit, and it gets rid of
warnings building on 32-bit.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

gallium/util: fix debug_get_flags_option on 32-bit

On 32-bit we need to use PRIu64 flags for printfs,
otherwise this segfaults in R600_DEBUG=help otherwise.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: "11.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

glsl: provide the option of using BFE for unpack builting lowering

This greatly improves generated code, especially for the snorm variants,
since it is able to get rid of the lshift/rshift for sext, as well as
replacing each shift + mask with a single op.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Matt Turner <mattst88@gmail.com>

glsl: use bitfield_insert instead of and + shift + or for packing

It is fairly tricky to detect the proper conditions for using bitfield
insert, but easy to just use it up front. This removes a lot of
instructions on nvc0 when invoking the packing builtins.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Matt Turner <mattst88@gmail.com>

i965/fs: Remove fs_visitor::try_replace_with_sel().

No shader-db changes on g4x, snb, hsw, or bdw.

Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/fs: Replace awful variable names.

   start_to      -> dst_start
   end_to        -> dst_end
   start_from    -> src_start
   end_from      -> src_end
   var_to        -> dst_var
   var_from      -> src_var
   reg_to        -> dst_reg
   reg_to_offset -> dst_reg_offset
   reg_from      -> src_reg

Not sure how these made sense to me before.

Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/fs: Skip blocks in register coalescing interference check.

No need to walk through instructions in blocks we know don't contain our
registers' live ranges.

Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/fs: Improve register coalescing interference check.

I always thought that the is_control_flow() -> return false check was a
bad hack, and some previous attempts to remove it have failed and have
been reverted.

The previous two patches fix some problems that caused register
coalescing to not notice some interference between registers, which the
is_control_flow() check apparently works around.

With that fixed, we can calculate interference more accurately.

total instructions in shared programs: 6261319 -> 6257917 (-0.05%)
instructions in affected programs:     346282 -> 342880 (-0.98%)
helped:                                1552

Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/fs: Use overwrites_reg() instead of dst.equals().

equals() returns false for registers with different types, using it
isn't appropriate to determine whether an is overwriting a register.

Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Only consider fixed_hw_reg in equals() if file is HW_REG/IMM.

Noticed when debugging things that lead to the next patch.

On G45 (and presumably ILK) this helps register coalescing:

total instructions in shared programs: 4077373 -> 4077340 (-0.00%)
instructions in affected programs:     43751 -> 43718 (-0.08%)
helped:                                52
HURT:                                  2

Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/fs: Do not set the size for zero-size uniforms

Zero sized uniforms can exist in the list, but they don't get get any space
allocated in prog_data->params or in the param_size array, so the size
should not be set for them.  This was previously fixed in:

commit: 781dc7c0e1f41502f18e07c0940af949a78d2792.

However,

commit: 259f7291de2387aa3ac5f856b39b7b934a1d8e7d

removed the fix.

Signed-off-by: Marta Lofstedt <marta.lofstedt@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

mesa: return old name for deleted samplers for SAMPLER_BINDING queries

If the sampler object has been deleted in the same context the binding
will have been cleared. If it has been deleted in another context, the
spec does not say what should returned. None of the other binding point
queries check for deletion in another context.

Also, as names of deleted objects are free for reuse, the current code
didn't even work reliably.

Reviewed-by: Fredrik Höglund <fredrik@kde.org>
Signed-off-by: Fredrik Höglund <fredrik@kde.org>

mesa: add missing queries for ARB_direct_state_access

This adds index queries (glGet*i_v) for GL_TEXTURE_BINDING_* and
GL_SAMPLER_BINDING, as well as textue queries
(glGetTex{,ture}Parameter*) for GL_TEXTURE_TARGET.

CC: "10.6 11.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Fredrik Höglund <fredrik@kde.org>
Signed-off-by: Fredrik Höglund <fredrik@kde.org>

docs: Fix a typo in GL3.txt concerning GL_KHR_context_flush_control

mesa: fix dispatch sanity with GL_OES_texture_storage_multisample_2d_array

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91785
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Matt Turner <mattst88@gmail.com>

ABI-check: Use more portable bash invocation.

Fixes 'make check' on FreeBSD.

Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>

i965/nir: Make use of nir_opt_undef

Shader-db result on Ivy Bridge:
total instructions in shared programs: 145484 -> 145445 (-0.03%)
instructions in affected programs:     225 -> 186 (-17.33%)
helped:                                5
HURT:                                  0

Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Thomas Helland <thomashelland90@gmail.com>
Signed-off-by: Boyan Ding <boyan.j.ding@gmail.com>

glapi: Remove _x86_64_get_get_dispatch symbol from x86-64 assembly.

Never used.

Reviewed-by: Mark Janes <mark.a.janes@intel.com>

glsl: clean up textureSize prototype

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Timothy Arceri <t_arceri@yahoo.com.au>

r600g/sb: Don't crash on empty if jump target

Signed-off-by: Glenn Kennard <glenn.kennard@gmail.com>
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

r600g/sb: Don't read junk after EOP

Shaders that contain instruction data after an instruction with EOP could end
up parsing that as an instruction, leading to various crashes and asserts in
SB as it gets very confused if it sees for instance a loop start instruction
jumping off to some random point.

Add a couple of asserts, and print EOP bit if set in old asm printer.

Signed-off-by: Glenn Kennard <glenn.kennard@gmail.com>
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

r600g/sb: Handle undef in read port tracker

e8e443 missed adding check for undef values also in
unreserve function, leading to an assert triggering.

Signed-off-by: Glenn Kennard <glenn.kennard@gmail.com>
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

mesa: rename rowStride to imageStride in texturesubimage()

Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

mesa: only copy the requested teximage faces

Cube maps are special in that they have separate teximages for each
face. We handled that by copying the data to them separately, but in
case zoffset != 0 or depth != 6 we would read off the end of the client
array or modify the wrong images.

zoffset/depth have already been verified by the time the code gets to
this stage, so no need to double-check.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: "10.6 11.0" <mesa-stable@lists.freedesktop.org>

nir: Convert the builder to use the new NIR cursor API.

The NIR cursor API is exactly what we want for the builder's insertion
point.  This simplifies the API, the implementation, and is actually
more flexible as well.

This required a bit of reworking of TGSI->NIR's if/loop stack handling;
we now store cursors instead of cf_node_lists, for better or worse.

v2: Actually move the cursor in the after_instr case.
v3: Take advantage of nir_instr_insert (suggested by Connor).
v4: vc4 build fixes (thanks to Eric).

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net> [v1]
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com> [v4]
Acked-by: Connor Abbott <cwabbott0@gmail.com> [v4]

nir: Convert the NIR instruction insertion API to use cursors.

This patch implements a general nir_instr_insert() function that takes a
nir_cursor for the insertion point.  It then reworks the existing API to
simply be a wrapper around that for compatibility.

This largely involves moving the existing code into a new function.

Suggested by Connor Abbott.

v2: Make the legacy functions static inline in nir.h (requested by
    Connor Abbott).

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Acked-by: Connor Abbott <cwabbott0@gmail.com>

nir: Move nir_cursor to nir.h.

We want to use this for normal instruction insertion too, not just
control flow.  Generally these functions are going to be extremely
useful when working with NIR, so I want them to be widely available
without having to include a separate file.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Acked-by: Connor Abbott <cwabbott0@gmail.com>

nir: Strengthen "no jumps" assertions in instruction insertion API.

Jumps must be the last instruction in a block, so inserting another
instruction after a jump is illegal.

Previously, we only checked this when the new instruction being inserted
was a jump.  This is a red herring - inserting *any* kind of instruction
after a jump is illegal.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Acked-by: Connor Abbott <cwabbott0@gmail.com>

st/mesa: use PROGRAM_ARRAY for storing structs containing arrays

Previously, we used PROGRAM_ARRAY only for variables which were
arrays or matrices.  But if the variable is a structure containing
an array or matrix, we need to use PROGRAM_ARRAY for that too.

Before, we failed an assertion:
  state_tracker/st_glsl_to_tgsi.cpp:4900:
  Assertion `src_reg->file != PROGRAM_TEMPORARY' failed.
when running the piglit test
glsl-1.20/execution/fs-const-array-of-struct-of-array.shader_test

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

glsl: fix comment typo: s/filed/field/

gallium/util: fix code formatting in u_blitter.h

Trivial.

i965/fs: Split VGRFs after lowering pull constants

The split_virtual_grfs code doesn't properly rewrite reladdr so we need to
make sure that any uniform indirects are lowered away first.

This fixes the glsl-fs-uniform-indexed-by-swizzled-vec4.shader_test in piglit

Cc: "10.6" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i964/fs: Refactor assign_constant_locations

Now that all constant locations are assigned in a single function, we can
refactor it a bit to unify things.  In particular, we now handle
pull_constant_loc and push_constant_loc more similarly and we only modify
stage_prog_data->params[] in one place at the end of the function.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>