Automatic date update in version.in

MIPS/GAS: Implement microMIPS branch/jump compaction

Convert microMIPS branches and jumps whose delay slot would be filled by
a generated NOP instruction to the corresponding compact form where one
exists, in a manner similar to MIPS16 JR->JRC and JALR->JALRC swap.

Do so even where the transformation switches from a 16-bit to a 32-bit
branch encoding for no benefit in code size reduction, as this is still
advantageous.  This is because a branch/NOP pair takes 2 pipeline slots
or a 2-cycle completion latency except in superscalar implementations.
Whereas a compact branch may or may not stall on its target fetch, so it
will at most have a 2-cycle completion latency and may have only 1 even
in scalar implementations, and in superscalar implementations it is
expected to have no worse latency as a branch/NOP pair has.  Also it
won't stall and therefore take the extra latency cycle in the not-taken
case.

Technically this is the same as MIPS16 compaction: for the qualifying
instruction encodings the APPEND_ADD_COMPACT machine code generation
method is selected where APPEND_ADD_WITH_NOP otherwise would and tells
the code generator in `append_insn' to convert the regular form of an
instruction to its corresponding compact form.  For this the opcode is
tweaked as necessary and the microMIPS opcode table is scanned for the
matching updated instruction.  A non-$0 `rt' operand to BEQ and BNE
instructions is moved to the `rs' operand field of BEQZC and BNEZC
encodings as required.

Unlike with MIPS16 compaction however we need to handle out-of-distance
branch relaxation as well.  We do this by deferring the generation of
any delay-slot NOP required to relaxation made in `md_convert_frag', by
converting the APPEND_ADD_WITH_NOP machine code generation to APPEND_ADD
where a relaxed instruction is recorded.  Relaxation then, depending on
actual code produced, chooses between either using a compact branch or
jump encoding and emitting the NOP outstanding if no compact encoding is
possible.

For code simplicity's sake the relaxation pass is retained even if the
principle of preferring a compact encoding to a 16-bit branch/NOP pair
means, in the absence of out-of-range branch relaxation, that a single
compact branch machine code instruction will eventually be produced from
a given assembly source instruction.

gas/
* config/tc-mips.c (RELAX_MICROMIPS_ENCODE): Add `nods' flag.
(RELAX_MICROMIPS_RELAX32, RELAX_MICROMIPS_TOOFAR16)
(RELAX_MICROMIPS_MARK_TOOFAR16, RELAX_MICROMIPS_CLEAR_TOOFAR16)
(RELAX_MICROMIPS_TOOFAR32, RELAX_MICROMIPS_MARK_TOOFAR32)
(RELAX_MICROMIPS_CLEAR_TOOFAR32): Shift bits.
(get_append_method): Also return APPEND_ADD_COMPACT for
microMIPS instructions.
(find_altered_mips16_opcode): Exclude macros from matching.
Factor code out...
(find_altered_opcode): ... to this new function.
(find_altered_micromips_opcode): New function.
(frag_branch_delay_slot_size): Likewise.
(append_insn): Handle microMIPS branch/jump compaction.
(macro_start): Likewise.
(relaxed_micromips_32bit_branch_length): Likewise.
(md_convert_frag): Likewise.
* testsuite/gas/mips/micromips.s: Add conditional explicit NOPs
for delay slot filling.
* testsuite/gas/mips/micromips-b16.s: Add explicit NOPs for
delay slot filling.
* testsuite/gas/mips/micromips-size-1.s: Likewise.
* testsuite/gas/mips/micromips.l: Adjust line numbers.
* testsuite/gas/mips/micromips-warn.l: Likewise.
* testsuite/gas/mips/micromips-size-1.l: Likewise.
* testsuite/gas/mips/micromips.d: Adjust padding.
* testsuite/gas/mips/micromips-trap.d: Likewise.
* testsuite/gas/mips/micromips-insn32.d: Likewise.
* testsuite/gas/mips/micromips-noinsn32.d: Likewise.
* testsuite/gas/mips/micromips@beq.d: Update patterns for
branch/jump compaction.
* testsuite/gas/mips/micromips@bge.d: Likewise.
* testsuite/gas/mips/micromips@bgeu.d: Likewise.
* testsuite/gas/mips/micromips@blt.d: Likewise.
* testsuite/gas/mips/micromips@bltu.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-4.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-4-64.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5pic.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5-64.d: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5pic-64.d: Likewise.
* testsuite/gas/mips/micromips@jal-svr4pic-local.d: Likewise.
* testsuite/gas/mips/micromips@jal-svr4pic-local-n32.d:
Likewise.
* testsuite/gas/mips/micromips@jal-svr4pic-local-n64.d:
Likewise.
* testsuite/gas/mips/micromips@loc-swap.d: Likewise.
* testsuite/gas/mips/micromips@loc-swap-dis.d: Likewise.
* testsuite/gas/mips/micromips@relax.d: Likewise.
* testsuite/gas/mips/micromips@relax-at.d: Likewise.
* testsuite/gas/mips/micromips@relax-swap3.d: Likewise.
* testsuite/gas/mips/branch-extern-2.d: Likewise.
* testsuite/gas/mips/branch-extern-4.d: Likewise.
* testsuite/gas/mips/branch-section-2.d: Likewise.
* testsuite/gas/mips/branch-section-4.d: Likewise.
* testsuite/gas/mips/branch-weak-2.d: Likewise.
* testsuite/gas/mips/branch-weak-5.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-n32.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-n64.d: Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend.d:
Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend-n32.d:
Likewise.
* testsuite/gas/mips/micromips-branch-absolute-addend-n64.d:
Likewise.
* testsuite/gas/mips/micromips-compact.d: New test.
* testsuite/gas/mips/mips.exp: Run the new test.

ld/
* testsuite/ld-mips-elf/micromips-branch-absolute.d: Update
patterns for branch compaction.
* testsuite/ld-mips-elf/micromips-branch-absolute-addend.d:
Likewise.

opcodes/
* micromips-opc.c (micromips_opcodes): Reorder "bc" next to "b",
"beqzc" next to "beq", "bnezc" next to "bne" and "jrc" next to
"j".

Begin implementing ARC NPS-400 Accelerator instructions

opcodes * arc-nps400-tbl.h: Change block comments to GNU format.
        * arc-dis.c: Add new globals addrtypenames,
        addrtypenames_max, and addtypeunknown.
        (get_addrtype): New function.
        (print_insn_arc): Print colons and address types when
        required.
        * arc-opc.c: Add MAKE_INSERT_NPS_ADDRTYPE macro and use to
        define insert and extract functions for all address types.
        (arc_operands): Add operands for colon and all address
        types.
        * arc-nps-400-tbl.h: Add NPS-400 BMU instructions to opcode table.
        * arc-opc.c: Add NPS_BD_TYPE and NPS_BMU_NUM operands,
        insert_nps_bd_num_buff and extract_nps_bd_num_buff functions.
        * arc-nps-400-tbl.h: Add NPS-400 PMU instructions to opcode table.
        * arc-opc.c: Add NPS_PMU_NXT_DST and NPS_PMU_NUM_JOB operands,
        insert_nps_pmu_num_job and extract_nps_pmu_num_job functions.

include * opcode/arc.h: Add ARC_OPERAND_ADDRTYPE,
        ARC_OPERAND_COLON. Add the arc_nps_address_type enum and
        ARC_NUM_ADDRTYPES.
        * opcode/arc.h: Add BMU to insn_class_t enum.
        * opcode/arc.h: Add PMU to insn_class_t enum.

gas     * config/tc-arc.c: Add new global arc_addrtype_hash.
        Define O_colon and O_addrtype.
        (debug_exp): Add O_colon and O_addrtype.
        (tokenize_arguments): Handle colon and address type
        tokens.
        (declare_addrtype): New function.
        (md_begin): Initialise arc_addrtype_hash.
        (arc_parse_name): Add lookup of address types.
(assemble_insn): Handle colons and address types by
        ignoring them.
        * testsuite/gas/arc/nps400-8.s: New file.
        * testsuite/gas/arc/nps400-8.d: New file.
        * testsuite/gas/arc/nps400-8.s: Add PMU instruction tests.
        * testsuite/gas/arc/nps400-8.d: Add expected PMU
        instruction output.

Restrict linker garbage collection personality test to cfi enabled targets.

* testsuite/ld-gc/personality.d: Use "target cfi" to restrict the
test to targets which support cfi.

Fix seg-fault when running garbage collection on coff binaries.

PR ld/20401
* coffgen.c (fini_reloc_cookie_rels): Check for the extistence
of the coff_section_data before using it.

Fix warning in ldbuildid.c mingw32 code

* ldbuildid.c (generate_build_id): Warning fix.

Fix aarch64_relocs.sh file mode

Automatic date update in version.in

Wean gdb and sim off private libbfd.h header

The major reason this header was needed, bfd_default_set_arch_mach,
has now moved to bfd.h.

gdb/
* amd64-darwin-tdep.c: Don't include libbfd.h.
* i386-darwin-tdep.c: Likewise.
* rs6000-nat.c: Likewise.
* rs6000-tdep.c: Likewise.
sim/aarch64/
* memory.c: Don't include libbfd.h.
sim/rl78/
* load.c: Don't include libbfd.h.
(rl78_load): Don't use private iovec seek or read.
sim/rx/
* load.c: Don't include libbfd.h.
(rx_load): Don't use private iovec seek or read.

Fix PR server/20414 - x32 gdbserver always crashes inferior

Debugging an x32 process with an x32 gdbserver always results in:

 (gdb) c
 Continuing.

 Program received signal SIGSEGV, Segmentation fault.
 0xf7de9600 in _dl_debug_state () from target:/libx32/ld-linux-x32.so.2
 (gdb)

Looking at the remote debug logs reveals the problem, here:

  Packet received: T05swbreak:;06:a0d4ffff00000000;07:b8d3ffff00000000;10:0096def701000000;thread:p7d7a.7d7a;core:1;
                                                                          ^^^^^^^^^^^^^^^^

The underlined value is the expedited value of RIP (in little endian).
But notice that 01 in 0x01f7de9600, while gdb says the program stopped
at 0xf7de9600.  0x01ffffffff is over 32 bits, which indicates that
something wen't wrong somewhere in gdbserver.

The problem turns out to be in gdbserver's x86_get_pc / x86_set_pc
routines, where "unsigned long" is used assuming that it can fit a
64-bit value, while unsigned long is actually 32-bit on x32.  The
result is that collect_register_by_name / supply_register_by_name end
up reading/writing random bytes off the stack.

Fix this by using explicit uint64_t instead of unsigned long.
For consistency, use uint32_t instead of unsigned int in the 32-bit
paths.

gdb/gdbserver/ChangeLog:
2016-07-26  Pedro Alves  <palves@redhat.com>

PR server/20414
* linux-x86-low.c (x86_get_pc, x86_set_pc): Use uint64_t instead
of unsigned long for 64-bit registers and use uint32_t instead of
unsigned int for 32-bit registers.

PR python/20190 - compute TLS symbol without a frame

PR python/20190 arose from an exception I noticed when trying to use
the Python unwinder for Spider Monkey in Firefox.

The problem is that the unwinder wants to examine the value of a
thread-local variable.  However, sympy_value rejects this because
symbol_read_needs_frame returns true for a TLS variable.

This problem arose once before, though in a different context:

https://sourceware.org/bugzilla/show_bug.cgi?id=11803

At the time Pedro and Daniel pointed out a simpler way to fix that bug
(see links in 20190 if you are interested); but for this new bug I
couldn't think of a similar fix and ended up implementing Daniel's
other suggestion:

https://sourceware.org/ml/gdb-patches/2010-07/msg00393.html

That is, this patch makes it possible to detect whether a symbol needs
a specific frame, or whether it just needs the inferior to have
registers.

Built and regtested on x86-64 Fedora 24.

2016-07-26  Tom Tromey  <tom@tromey.com>

* symtab.c (register_symbol_computed_impl): Update.
PR python/20190:
* value.h (symbol_read_needs): Declare.
(symbol_read_needs_frame): Add comment.
* symtab.h (struct symbol_computed_ops) <read_variable>: Update
comment.
<get_symbol_read_needs>: Rename.  Change return type.
* findvar.c (symbol_read_needs): New function.
(symbol_read_needs_frame): Rewrite.
(default_read_var_value): Use symbol_read_needs.
* dwarf2loc.c (struct symbol_needs_baton): Rename.
<needs>: Renamed from needs_frame.  Changed type.
(needs_frame_read_addr_from_reg, symbol_needs_get_reg_value)
(symbol_needs_read_mem, symbol_needs_frame_base)
(symbol_needs_frame_cfa, symbol_needs_tls_address)
(symbol_needs_dwarf_call): Rename.
(needs_dwarf_reg_entry_value): Update.
(symbol_needs_ctx_funcs, dwarf2_loc_desc_get_symbol_read_needs):
Rename and update.
(locexpr_get_symbol_read_needs, loclist_symbol_needs): Likewise.
(dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Update.
* defs.h (enum symbol_needs_kind): New.

2016-07-26  Tom Tromey  <tom@tromey.com>

PR python/20190:
* gdb.threads/tls.exp (check_thread_local): Add python symbol
test.

MIPS/GAS: Respect the `insn32' mode in branch relaxation

Complement:

commit 833794fc12d98139fc33f6b0b85feb03471007b7
Author: Maciej W. Rozycki <macro@linux-mips.org>
Date:   Tue Jun 25 18:02:34 2013 +0000

<https://sourceware.org/ml/binutils/2013-06/msg00104.html>, ("microMIPS
insn32 mode support"), and fix an issue with microMIPS branch relaxation
producing 16-bit instructions in the `insn32' mode.  Use equivalent
32-bit instruction sequences.

gas/
* config/tc-mips.c (RELAX_MICROMIPS_ENCODE): Add `insn32' flag.
(RELAX_MICROMIPS_INSN32): New macro.
(RELAX_MICROMIPS_UNCOND, RELAX_MICROMIPS_COMPACT)
(RELAX_MICROMIPS_LINK, RELAX_MICROMIPS_RELAX32)
(RELAX_MICROMIPS_TOOFAR16, RELAX_MICROMIPS_MARK_TOOFAR16)
(RELAX_MICROMIPS_CLEAR_TOOFAR16, RELAX_MICROMIPS_TOOFAR32)
(RELAX_MICROMIPS_MARK_TOOFAR32, RELAX_MICROMIPS_CLEAR_TOOFAR32):
Shift bits.
(append_insn): Record `mips_opts.insn32' with relaxed microMIPS
branches.
(relaxed_micromips_32bit_branch_length): Handle the `insn32'
mode.
(md_convert_frag): Likewise.
* testsuite/gas/mips/micromips-branch-relax.s: Add `insn32'
conditionals.
* testsuite/gas/mips/micromips-branch-relax.l: Update line
numbers accordingly.
* testsuite/gas/mips/micromips-branch-relax-pic.l: Likewise.
* testsuite/gas/mips/micromips-branch-relax-insn32.d: New test.
* testsuite/gas/mips/micromips-branch-relax-insn32-pic.d: New
test.
* testsuite/gas/mips/micromips-branch-relax-insn32.l: New
stderr output.
* testsuite/gas/mips/micromips-branch-relax-insn32-pic.l: New
stderr output.
* testsuite/gas/mips/mips.exp: Run the new tests.

MIPS/BFD: Handle branches in PLT compression selection

Complement:

commit 1bbce132647e6d72aaa065cce5c1d5dd6585c2b2
Author: Maciej W. Rozycki <macro@linux-mips.org>
Date:   Mon Jun 24 23:55:46 2013 +0000

<https://sourceware.org/ml/binutils/2013-06/msg00077.html>, ("MIPS:
Compressed PLT/stubs support"), and also choose between regular and
compressed PLT entries as appropriate for any branches referring.

bfd/
* elfxx-mips.c (mips_elf_calculate_relocation): Handle branches
in PLT compression selection.
(_bfd_mips_elf_check_relocs): Likewise.

ld/
* testsuite/ld-mips-elf/compressed-plt-1.s: Add branch support.
* testsuite/ld-mips-elf/compressed-plt-1a.s: Likewise.
* testsuite/ld-mips-elf/compressed-plt-1b.s: Likewise.
* testsuite/ld-mips-elf/compressed-plt-1-o32-branch.od: New
test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-branch.rd: New
test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-mips16-bronly.od:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-mips16-bronly.rd:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-mips16-branch.od:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-mips16-branch.rd:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-umips-bronly.od:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-umips-bronly.rd:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-umips-branch.od:
New test.
* testsuite/ld-mips-elf/compressed-plt-1-o32-umips-branch.rd:
New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.

Fix PR gdb/20413 - x32: linux_ptrace_test_ret_to_nx: Cannot PTRACE_PEEKUSER

An x32 gdb always issues this warning:

 (gdb) start
 Temporary breakpoint 1 at 0x4043e9: file foo.c, line 25.
 Starting program: a.out
 warning: linux_ptrace_test_ret_to_nx: Cannot PTRACE_PEEKUSER: Input/output error

 Temporary breakpoint 1, main (argc=1, argv=0xffffd544) at foo.c:25
 25      {
 (gdb)

As described in Linux commit 55283e253771 (x32: Add ptrace for x32):

    [...] PTRACE_PEEKUSR and PTRACE_POKEUSR are only allowed to access
    segment and debug registers. [...]

The fix is to use PTRACE_GETREGS instead.

gdb/ChangeLog:
2016-07-26  Pedro Alves  <palves@redhat.com>

* nat/linux-ptrace.c: Include "gregset.h".
(linux_ptrace_test_ret_to_nx): Use PTRACE_GETREGS instead of
PTRACE_PEEKUSER.

Fix PR gdb/20287 - x32 and "gdb_static_assert (sizeof (nat_siginfo_t) == sizeof (siginfo_t))"

Building an x32 gdb trips on a static assertion:

  In file included from .../src/gdb/common/common-defs.h:71:0,
   from .../src/gdb/nat/amd64-linux-siginfo.c:21:
  .../src/gdb/common/gdb_assert.h:26:66: error: size of array ‘never_defined_just_used_for_checking’ is negative
     extern int never_defined_just_used_for_checking[(expr) ? 1 : -1]
    ^
  .../src/gdb/nat/amd64-linux-siginfo.c:113:1: note: in expansion of macro ‘gdb_static_assert’
   gdb_static_assert (sizeof (nat_siginfo_t) == sizeof (siginfo_t));
   ^

The problem is that the way nat_siginfo_t is defined, it can only
match the host's siginfo_t object when gdb is built as a 64-bit
program.

Several bits of nat_siginfo_t are off:

- nat_siginfo_t's _pad field's definition is:

   int _pad[((128 / sizeof (int)) - 4)];

  while /usr/include/bits/siginfo.h has:

   # define __SI_MAX_SIZE     128
   # if __WORDSIZE == 64
   #  define __SI_PAD_SIZE     ((__SI_MAX_SIZE / sizeof (int)) - 4)
   # else
   #  define __SI_PAD_SIZE     ((__SI_MAX_SIZE / sizeof (int)) - 3)
   # endif

  and __WORDSIZE == 32 for x32.  This is what causes the size of
  nat_siginfo_t to be wrong and the assertion to fail.

- the nat_clock_t type is incorrect for 64-bit.  We have this:

   /* For native 64-bit, clock_t in _sigchld is 64bit aligned at 4 bytes.  */
   typedef long __attribute__ ((__aligned__ (4))) nat_clock_t;

  however, /usr/include/bits/siginfo.h has:

   # if defined __x86_64__ && __WORDSIZE == 32
   /* si_utime and si_stime must be 4 byte aligned for x32 to match the
      kernel.  We align siginfo_t to 8 bytes so that si_utime and si_stime
      are actually aligned to 8 bytes since their offsets are multiple of
      8 bytes.  */
   typedef __clock_t __attribute__ ((__aligned__ (4))) __sigchld_clock_t;
   #  define __SI_ALIGNMENT __attribute__ ((__aligned__ (8)))
   # else
   typedef __clock_t __sigchld_clock_t;
   #  define __SI_ALIGNMENT
   # endif

  So we're currently forcing 4-byte alignment on clock_t, when it
  should only be so for x32, not 64-bit.

The fix:

 - Leaves nat_siginfo_t strictly for the 64-bit ABI.

 - Adds a new typedef for the siginfo type that ptrace uses
   (ptrace_siginfo_t).  An x32 gdb always gets/sets an x32 siginfo_t
   type with PTRACE_GETSIGINFO/PTRACE_SETSIGINFO.

 - Uses this new ptrace_siginfo_t type instead of nat_siginfo_t as the
   intermediate conversion type.

gdb/ChangeLog:
2016-07-26  Pedro Alves  <palves@redhat.com>

* amd64-linux-nat.c (amd64_linux_siginfo_fixup): Rename 'native'
parameter to 'ptrace'.
* nat/amd64-linux-siginfo.c (GDB_SI_SIZE): New define.
(nat_uptr_t): New an unsigned long.
(nat_clock_t): Remove attribute __aligned__.
(struct nat_timeval): Delete.
(nat_siginfo_t): Remove attribute __aligned__.
(ptrace_siginfo_t): Define.
(compat_siginfo_from_siginfo, siginfo_from_compat_siginfo)
(compat_x32_siginfo_from_siginfo)
(siginfo_from_compat_x32_siginfo): Make 'from' parameter const.
Convert through a ptrace_siginfo_t instead of a nat_siginfo_t.
Remove casts.
(amd64_linux_siginfo_fixup_common): Rename 'native' parameter to
'ptrace'.  Remove static assertions.
(top level): New static assertions.

gdb/gdbserver/ChangeLog:
2016-07-26  Pedro Alves  <palves@redhat.com>

* linux-x86-low.c (x86_siginfo_fixup): Rename 'native' parameter
to 'ptrace'.

Add support for creating uuid based build-id's in a MinGW32 environment.

ld * ldbuildid.c: Changes for MinGW32:
Include windows.h and rpcdce.h.
(validate_build_id_style): Allow "uuid" style.
(generate_build_id): Fill in id_bits using UuidCreate().

[Gold, aarch64] Implement some AArch64 relocs.

This CL implemented the following relocs for AArch64 target.
  - R_AARCH64_MOVW_UABS_G*
  - R_AARCH64_MOVW_SABS_G* relocations

gold/ChangeLog

2016-07-26 Igor Kudrin  <ikudrin@accesssoftek.com>

    * aarch64-reloc-property.cc (Rvalue_bit_select_impl): New class.
    (rvalue_bit_select): Use Rvalue_bit_select_impl.
    * aarch64-reloc.def (MOVW_UABS_G0, MOVW_UABS_G0_NC,
    MOVW_UABS_G1,
    MOVW_UABS_G1_NC, MOVW_UABS_G2, MOVW_UABS_G2_NC, MOVW_UABS_G3,
    MOVW_SABS_G0, MOVW_SABS_G1, MOVW_SABS_G2): New relocations.
    * aarch64.cc (Target_aarch64::Scan::local): Add cases for new
    MOVW_UABS_* and MOVW_SABS_* relocations.
    (Target_aarch64::Scan::global): Likewise.
    (Target_aarch64::Relocate::relocate): Add cases and handlings
    for new MOVW_UABS_* and MOVW_SABS_* relocations.
    * testsuite/Makefile.am (aarch64_relocs): New test.
    * testsuite/Makefile.in: Regenerate.
    * testsuite/aarch64_globals.s: New test source file.
    * testsuite/aarch64_relocs.s: Likewise.
    * testsuite/aarch64_relocs.sh: New test script.

btrace, testsuite: fix assembly source file selection

Some btrace tests use assembly source files.  They use the target triplet to
distinguish between x86_64 and ia32 ISA.  This does not work for -m32 tests
without setting the target triplet to i686-?-?.

Instead use is_amd64_regs_target to distinguish between x86_64 and ia32 ISA.

See also https://sourceware.org/ml/gdb-patches/2016-07/msg00256.html.

testsuite/
* gdb.btrace/record_goto.exp: Use is_amd64_regs_target for selecting
assembly source files.
* gdb.btrace/stepi.exp: Use is_amd64_regs_target for selecting
assembly source files.
* gdb.btrace/tailcall.exp: Use is_amd64_regs_target for selecting
assembly source files.
* gdb.btrace/tailcall-only.exp: Use is_amd64_regs_target for selecting
assembly source files.

Automatic date update in version.in

Handle correctly passing a bad interpreter name to new-ui

When a bad interpreter name is passed to new-ui, such as:

  (gdb)  new-ui bloop /dev/pts/10

A partially created UI is left in the UI list, with interp set to NULL.
Trying to do anything that will print on this UI (such as "start") will
cause a segmentation fault.

Changes in v2:

  - Use with_test_prefix to namespace test procedures
  - Give an explicit stable test name
  - Add a "bad terminal path" test
  - Remove useless runto_main
  - Add missing intro comments

I did not factor out the pty spawn, as there is some magic involved I
don't quite understand.  But it wouldn't bring that much anyway.

gdb/ChangeLog:

* top.h (make_delete_ui_cleanup): New declaration.
* top.c (delete_ui_cleanup): New function.
(make_delete_ui_cleanup): New function.
(new_ui_command): Create restore_ui cleanup earlier, create a
delete_ui cleanup and discard it on success.

gdb/testsuite/ChangeLog:

* gdb.base/new-ui.exp (do_test_invalid_args): New
procedure.

linux-procfs: Handle lowercase "t (tracing stop)" state

Since Linux 2.6.33, /proc/PID/status shows "t (tracing stop)", with
lowercase 't'.  Because GDB is only expecting "T (tracing stop)", GDB
can incorrectly suppress errors in check_ptrace_stopped_lwp_gone:

 1578          if (!check_ptrace_stopped_lwp_gone (lp))
 1579            throw_exception (ex);

Ref: https://sourceware.org/ml/gdb-patches/2016-06/msg00072.html

2016-07-25  Pedro Alves  <palves@redhat.com>
    Jan Kratochvil  <jan.kratochvil@redhat.com>

* nat/linux-procfs.c (parse_proc_status_state): Handle lowercase
't'.

linux-procfs: Introduce enum proc_state

Parse the process's /proc/PID/status state into an enum instead of the
current scheme of passing state strings around.

gdb/ChangeLog:
2016-07-25  Pedro Alves  <palves@redhat.com>

* nat/linux-procfs.c (enum proc_state): New enum.
(parse_proc_status_state): New function.
(linux_proc_pid_get_state): Replace output string buffer parameter
with an output proc_state parameter.  Use parse_proc_status_state.
(linux_proc_pid_is_gone): Adjust to use proc_state values.
(linux_proc_pid_has_state): Change type of 'state' parameter; now
an enum proc_state.  Adjust to linux_proc_pid_get_state interface
change.
(linux_proc_pid_is_stopped)
(linux_proc_pid_is_trace_stopped_nowarn)
(linux_proc_pid_is_zombie_maybe_warn): Adjust to
linux_proc_pid_get_state interface change.

Add myself as a write-after-approval GDB maintainer.

btrace: Resume recording after disconnect.

This patch allows gdbserver to continue recording after disconnect.  On
reconnect, the recorded data is accessible to gdb as if no disconnect happened.

A possible application for this feature is remotely examine bugs that occur
at irregular intervals, where maintaining a gdb connection is inconvenient.

This also fixes the issue mentioned here:
https://sourceware.org/ml/gdb-patches/2015-11/msg00424.html

Signed-off-by: Tim Wiederhake <tim.wiederhake@intel.com>
gdb/ChangeLog:
* NEWS: Resume btrace on reconnect.
* record-btrace.c: Added record-btrace.h include.
(record_btrace_open): Split into this and ...
(record_btrace_push_target): ... this.
(record_btrace_disconnect): New function.
(init_record_btrace_ops): Use record_btrace_disconnect.
* record-btrace.h: New file.
* remote.c: Added record-btrace.h include.
(remote_start_remote): Check recording status.
(remote_btrace_maybe_reopen): New function.

gdb/doc/ChangeLog:
* gdb.texinfo: Resume btrace on reconnect.

gdb/testsuite/ChangeLog:

* gdb.btrace/reconnect.c: New file.
* gdb.btrace/reconnect.exp: New file.

Change-Id: I95e8b0ab8a89e58591aba0e63818cee82fd211bc

Revise targets able to run ELF 64k section test

* testsuite/ld-elf/sec64k.exp: Run test for arc, msp430, or1k
and m32r.  Correct comment.  Relax ld -r match to account for
msp increased number of default sections.

Automatic date update in version.in

Automatic date update in version.in

Implement catch syscall group

Implement support to add catchpoints for a group of related syscalls
using the syntax:

(gdb) catch syscall group:<group>
or
(gdb) catch syscall g:<group>

Several groups are predefined in the xml files for all architectures
supported by GDB over Linux.  They are based on the groups defined by
strace.

gdb/

* xml-syscall.c (get_syscalls_by_group): New.
(get_syscall_group_names): New.
(struct syscall_group_desc): New structure to store group data.
(struct syscalls_info): Include field to store the group list.
(sysinfo_free_syscall_group_desc): New.
(free_syscalls_info): Free group list.
(syscall_group_create_syscall_group_desc): New.
(syscall_group_add_syscall): New.
(syscall_create_syscall_desc): Add syscall to its groups.
(syscall_start_syscall): Load group attribute.
(syscall_group_get_group_by_name): New.
(xml_list_syscalls_by_group): New.
(xml_list_of_groups): New.
* xml-syscall.h (get_syscalls_by_group): Export function
to retrieve a list of syscalls filtered by the group name.
(get_syscall_group_names): Export function to retrieve the list
of syscall groups.
* break-catch-syscall.c (catch_syscall_split_args): Verify if
argument is a syscall group and expand it to a list of syscalls
when creating catchpoints.
(catch_syscall_completer): Add word completion for system call
groups.
* configure.ac: Include dependency for xsltproc when building
in maintainer-mode.
* break-catch-syscall.c (_initialize_breakpoint): Update catch
syscall command documentation.
* NEWS: Include section about catching groups of syscalls.
* configure: Regenerate.
* data-directory/Makefile.in: Generate syscall xml when building
in maintainer mode.
* syscalls/gdb-syscalls.dtd: Include group attribute to the
syscall element.
* syscalls/apply-defaults.xsl: New.
* syscalls/linux-defaults.xml.in: New.
* syscalls/aarch64-linux.xml: Rename to aarch64-linux.xml.in.
* syscalls/amd64-linux.xml: Rename to amd64-linux.xml.in.
* syscalls/arm-linux.xml: Rename to arm-linux.xml.in.
* syscalls/bfin-linux.xml: Rename to bfin-linux.xml.in.
* syscalls/i386-linux.xml: Rename to i386-linux.xml.in.
* syscalls/mips-n32-linux.xml: Rename to mips-n32-linux.xml.in.
* syscalls/mips-n64-linux.xml: Rename to mips-n64-linux.xml.in.
* syscalls/mips-o32-linux.xml: Rename to mips-o32-linux.xml.in.
* syscalls/ppc-linux.xml: Rename to ppc-linux.xml.in.
* syscalls/ppc64-linux.xml: Rename to ppc64-linux.xml.in.
* syscalls/s390-linux.xml: Rename to s390-linux.xml.in.
* syscalls/s390x-linux.xml: Rename to s390x-linux.xml.in.
* syscalls/sparc-linux.xml: Rename to sparc-linux.xml.in.
* syscalls/sparc64-linux.xml: Rename to sparc64-linux.xml.in.
* syscalls/aarch64-linux.xml: Regenerate.
* syscalls/amd64-linux.xml: Regenerate.
* syscalls/arm-linux.xml: Regenerate.
* syscalls/i386-linux.xml: Regenerate.
* syscalls/mips-n32-linux.xml: Regenerate.
* syscalls/mips-n64-linux.xml: Regenerate.
* syscalls/mips-o32-linux.xml: Regenerate.
* syscalls/ppc-linux.xml: Regenerate.
* syscalls/ppc64-linux.xml: Regenerate.
* syscalls/s390-linux.xml: Regenerate.
* syscalls/s390x-linux.xml: Regenerate.
* syscalls/sparc-linux.xml: Regenerate.
* syscalls/sparc64-linux.xml: Regenerate.

gdb/testsuite/

* gdb.base/catch-syscall.exp (do_syscall_tests): Add call
to test_catch_syscall_group.
(test_catch_syscall_group): New.

gdb/doc/

* gdb.texinfo (Set Catchpoints): Add 'group' argument to catch
syscall.

Fix ARMv8.1/v8.2 for hw watchpoint and breakpoint

The problem here is ARMv8.1 (and ARMv8.2) define a
different debug version than ARMv8 (7 and 8 respectively).
This fixes hw watchpoints and breakpoints by checking
for those debug versions too.

Committed as obvious after a test on aarch64-linux-gnu
(on a ThunderX machine which has ARMv8.1 support enabled).

ChangeLog:
* nat/aarch64-linux-hw-point.c
(aarch64_linux_get_debug_reg_capacity): Handle
ARMv8.1 and ARMv8.2 debug versions.
* nat/aarch64-linux-hw-point.h
(AARCH64_DEBUG_ARCH_V8_1): New define.
(AARCH64_DEBUG_ARCH_V8_2): New define.

Signed-off-by: Andrew Pinski <apinski@cavium.com>

Support JIT debugging on MS-Windows

gdb/ChangeLog:
2016-06-30  Руслан Ижбулатов  <lrn1986@gmail.com>

PR gdb/14529
* windows-nat.c (signal_event_command): New command 'signal-event'
for W32 JIT debug support.
* NEWS: Add an entry about the new 'signal-event' command.

gdb/doc/ChangeLog:
2016-06-30  Руслан Ижбулатов  <lrn1986@gmail.com>

* gdb.texinfo (Cygwin Native): Document the new 'signal-event'
command.

Automatic date update in version.in

PR rust/20162 - fix gdb regressions caused by rust 1.10

PR rust/20162 started life as a reminder to test gdb with versions of
rust after 1.8; but now concerns some gdb regressions seen with rust
1.10 ("beta") and 1.11 ("nightly").

The failures turn out to be a discrepancy between how rustc emits
DWARF and how gdb interprets it.  In particular, rustc will emit DWARF
like:

 <2><bc>: Abbrev Number: 9 (DW_TAG_structure_type)
    <bd>   DW_AT_name        : (indirect string, offset: 0x46a): HasMethods
    <c1>   DW_AT_byte_size   : 4
...
 <3><cc>: Abbrev Number: 11 (DW_TAG_subprogram)
...
    <df>   DW_AT_name        : (indirect string, offset: 0x514f): new

gdb wants to see a separate top-level DW_TAG_subprogram that refers to
this one via DW_AT_specification; but rustc doesn't emit one.  By my
reading of DWARF 4 5.5.7, this is ok, and gdb is incorrect here.

Fixing this involved a new case in scan_partial_symbols, and then a
further change in process_structure_scope to account for the fact
that, in Rust, such functions are not methods and should not be
attached to the structure type.

Next, it turns out that rust is emitting bad values for
DW_AT_linkage_name, e.g.:

    <db>   DW_AT_linkage_name: (indirect string, offset: 0x422): _ZN7methods8{{impl}}3newE

The the "{{impl}}" stuff is apparently some side effect of a change to
the compiler's internal representation.  Oops!

This also had a simple fix -- disregard these mangled names.

With these changes, there are no regressions in the gdb Rust tests
with either 1.10 or 1.11.  1.9, the stable release, is still pretty
broken, but I think there's nothing much to do about that.

These changes are a bit hackish, but no worse, I think, than other
kinds of quirk handling already done in the DWARF parser.  I have
reported all the rustc bugs upstream.  I plan to remove these hacks
from gdb some suitable time after they have been fixed in released
versions of Rust.

2016-07-22  Tom Tromey  <tom@tromey.com>

PR rust/20162:
* dwarf2read.c (scan_partial_symbols) <DW_TAG_structure_type>:
Call scan_partial_symbols for children when reading a Rust CU.
(dwarf2_physname): Ignore invalid DW_AT_linkage_name generated by
rustc.
(process_structure_scope) <DW_TAG_subprogram>: Call
read_func_scope for Rust.

Get "num" as unsigned in ctf

I see the following fail due to the warning,

-trace-frame-collected^M
[warning] Extracting signed value from an unsigned int (num)^M
....
FAIL: gdb.trace/mi-trace-frame-collected.exp: ctf: -trace-frame-collected

In ctf metadata, "num" in "tsv" is defined as unint32_t,

  ctf_save_write_metadata (&writer->tcs,
   "event {\n\tname = \"tsv\";\n\tid = %u;\n"
   "\tfields := struct { \n"
   "\t\tuint64_t val;\n"
   "\t\tuint32_t num;\n"
   "\t};\n"
   "};\n", CTF_EVENT_ID_TSV);

so we should read it as unsigned.  The patch below fixes the fail by
changing to bt_ctf_get_uint64.

gdb:

2016-07-22  Yao Qi  <yao.qi@linaro.org>

* ctf.c (ctf_traceframe_info): Call bt_ctf_get_uint64 rather than
bt_ctf_get_int64.

Fix segfault in ARC linker when generating got entries for local symbols.

bfd * arc-got.h (relocate_fix_got_relocs_for_got_info): Handle the case
where there's no elf_link_hash_entry while processing GOT_NORMAL got
entries.

ld * testsuite/ld-arc/got-01.d: New file.
* testsuite/ld-arc/got-01.s: New file.

Automatic date update in version.in

Set BFD_VERSION to 2.27.51

bfd/

* version.m4 (BFD_VERSION): Set to 2.27.51.
* configure: Regenerated.

binutils/

* configure: Regenerated.

gas/

* configure: Regenerated.

gprof/

* configure: Regenerated.

ld/

* configure: Regenerated.

opcodes/

* configure: Regenerated.

Move ChangeLog entry for PR ld/20376

Allow empty struct expressions in Rust

I learned recently that empty struct expressions, like "X{}", have been
promoted from experimental to stable in Rust.  This patch changes the
Rust expression parser to allow this case.

New test case included.
Built and regtested on x86-64 Fedora 23, using Rust 1.11 beta.

2016-07-21  Tom Tromey  <tom@tromey.com>

* rust-lang.c (rust_tuple_struct_type_p): Return false for empty
structs.
* rust-exp.y (struct_expr_list): Allow empty elements.

2016-07-21  Tom Tromey  <tom@tromey.com>

* gdb.rust/simple.rs (main): Use empty struct expression.
* gdb.rust/simple.exp: Add tests for empty struct expression.

Add -Wunused-but-set-* to build

This adds -Wunused-but-set-variable and -Wunused-but-set-parameter to
configure.

2016-07-21  Tom Tromey  <tom@tromey.com>

* configure: Rebuild.
* warning.m4 (AM_GDB_WARNINGS) <build_warnings>: Add
-Wunused-but-set-parameter, -Wunused-but-set-variable.

2016-07-21  Tom Tromey  <tom@tromey.com>

* configure: Rebuild.

Fix djgpp gdb build

 - A few missing casts required by C++, resulting in:

   ../../src/gdb/ser-go32.c:795:21: error: invalid conversion from 'const void*' to 'const char*' [-fpermissive]

   etc.

 - dos_noop has an incompatible prototype with struct serial_ops's
   setparity, resulting in:

    ../../src/gdb/ser-go32.c:874:1: error: invalid conversion from 'int (*)(serial*)' to 'int (*)(serial*, int)' [-fpermissive]

   (I thought of calling the ser-base.c default methods, but djgpp
   doesn't include ser-base.c in the build.)

gdb/ChangeLog:
2016-07-21  Pedro Alves  <palves@redhat.com>

* go32-nat.c (go32_create_inferior): Add cast.
* ser-go32.c (dos_noop): Delete.
(dos_flush_output, dos_setparity, dos_drain_output): New
functions.
(dos_write): Add cast.
(dos_ops): Use dos_flush_output, dos_setparity and
dos_drain_output.
* top.c (do_chdir_cleanup): Add cast.

Remove unused variable in windows-nat.c

Leave the call for side effects.

gdb/ChangeLog:
2016-07-21  Pedro Alves  <palves@redhat.com>

* windows-nat.c (handle_exception): Remove "th".

Remove unused variable in gdb/varobj.c when built without Python support

gdb/ChangeLog:
2016-07-21  Pedro Alves  <palves@redhat.com>

* varobj.c (varobj_value_get_print_value): Move "gdbarch" to block
scope that uses it.

Fix cast to 'gdb_breakpoint *'

c-mode buildbot catches a build problem,

gcc -g -O2    -I. -I../../../binutils-gdb/gdb/gdbserver -I../../../binutils-gdb/gdb/gdbserver/../common -I../../../binutils-gdb/gdb/gdbserver/../regformats -I../../../binutils-gdb/gdb/gdbserver/.. -I../../../binutils-gdb/gdb/gdbserver/../../include -I../../../binutils-gdb/gdb/gdbserver/../gnulib/import -Ibuild-gnulib-gdbserver/import  -Wall -Wpointer-arith -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wempty-body -Wpointer-sign -Wmissing-prototypes -Wdeclaration-after-statement -Wmissing-parameter-type -Wold-style-declaration -Wold-style-definition -Wformat-nonliteral -Wno-missing-prototypes -Werror -DGDBSERVER -c -o hostio.o -MT hostio.o -MMD -MP -MF .deps/hostio.Tpo ../../../binutils-gdb/gdb/gdbserver/hostio.c
../../../binutils-gdb/gdb/gdbserver/mem-break.c: In function find_gdb_breakpoint:
../../../binutils-gdb/gdb/gdbserver/mem-break.c:996:15: error: gdb_breakpoint undeclared (first use in this function)
       return (gdb_breakpoint *) bp;

we should use 'struct gdb_breakpoint' rather than 'gdb_breakpoint'.
Patch below fixes this.

gdb/gdbserver:

2016-07-21  Yao Qi  <yao.qi@linaro.org>

* mem-break.c (find_gdb_breakpoint): Cast bp to
'struct gdb_breakpoint *' rather than 'gdb_breakpoint *'.

Support vCont s and S actions with software single step

GDBserver with software single step should be able to claim supporting
vCont s and S actions, so that GDB knows the remote target can do
single step.  It doesn't matter to GDB that the single step in the
remote target is done via hardware or software.

gdb/gdbserver:

2016-07-21  Yao Qi  <yao.qi@linaro.org>

* server.c (handle_v_requests): Support s and S actions
if target_supports_software_single_step return true.

Use reinsert_breakpoint for vCont;s

This patch is to teach GDBserver using software single step to handle
vCont;s.  Simply speaking, if the thread's resume request is resume_step,
install reinsert breakpoint at the next pcs when GDBserver is about to
resume threads.  These reinsert breakpoints of a thread are removed,
when GDBserver gets an event from that thread and reports it back to
GDB.

gdb/gdbserver:

2016-07-21  Yao Qi  <yao.qi@linaro.org>

* linux-low.c (resume_stopped_resumed_lwps): If resume request
is resume_step, call maybe_hw_step.
(linux_wait_1): Stop all threads, remove reinsert breakpoints,
and unstop them.
(linux_resume_one_lwp_throw): Don't assert the thread has reinsert
breakpoints or not.
(proceed_one_lwp): If resume request is resume_step, install
reinsert breakpoints and call maybe_hw_step.

Enqueue signal even when resuming threads

Nowadays, we only enqueue signal when we leave thread pending in
linux_resume_one_thread.  If lwp->resume->sig isn't zero (GDB wants
to resume with signal), we pass lwp->resume->sig to
linux_resume_one_lwp.

In order to reduce the difference between resuming thread with signal
and proceeding thread with signal, when we resume thread, we can
enqueue signal too, and proceed thread.  The signal will be consumed in
linux_resume_one_lwp_throw from lwp->pending_signals.

gdb/gdbserver:

2016-07-21  Yao Qi  <yao.qi@linaro.org>

* linux-low.c (proceed_one_lwp): Declare.
(linux_resume_one_thread): Remove local variable 'step'.
Lift code enqueue signal.  Call proceed_one_lwp instead of
linux_resume_one_lwp.

Use enqueue_pending_signal in linux_resume_one_thread

gdb/gdbserver:

2016-07-21  Yao Qi  <yao.qi@linaro.org>

* linux-low.c (linux_resume_one_thread): Call
enqueue_pending_signal.

Switch current_thread to lwp's thread in install_software_single_step_breakpoints

install_software_single_step_breakpoints has parameter lwp, but still
need to switch to current_thread.  In order to simplify its caller,
we do the current_thread save/restore inside install_software_single_step_breakpoints.

gdb/gdbserver:

2016-07-21  Yao Qi  <yao.qi@linaro.org>

* gdbthread.h (make_cleanup_restore_current_thread): Declare.
* inferiors.c (do_restore_current_thread_cleanup): New function.
(make_cleanup_restore_current_thread): Likewise.
* linux-low.c (install_software_single_step_breakpoints): Call
make_cleanup_restore_current_thread.  Switch current_thread to
thread.

Make reinsert_breakpoint thread specific

This patch makes reinsert_breakpoint thread specific, which means we
insert and remove reinsert_breakpoint breakpoints for a specific
thread.  This motivation of this change is that I'll use
reinsert_breakpoint for vCont;s on software single step target, so that
GDBserver may insert one reinsert_breakpoint for one thread doing
step-over, and insert one reinsert_breakpoint for another thread doing
vCont;s.  After the operation of one thread is finished, GDBserver must
remove reinsert_breakpoint for that thread only.

On the other hand, reinsert_breakpoint is used for step-over nowadays.
GDBserver inserts reinsert_breakpoint, and wait only from the thread
doing step-over.  After the step-over is done, GDBserver removes the
reinsert_breakpoint.  If there is still any threads need step-over, do
the same again until all threads are finished step-over.  In other words,
reinsert_breakpoint is globally thread specific, but in an implicit way.
It is natural to make it explicitly thread specific.

gdb/gdbserver:

2016-07-21  Yao Qi  <yao.qi@linaro.org>

* mem-break.c (struct reinsert_breakpoint) <ptid>: New field.
(set_reinsert_breakpoint): New parameter ptid.  Callers updated.
(clone_one_breakpoint): Likewise.
(delete_reinsert_breakpoints): Change parameter to thread.
Callers updated.
(has_reinsert_breakpoints): Likewise.
(uninsert_reinsert_breakpoints): Likewise.
(reinsert_reinsert_breakpoints): Likewise.
* mem-break.h (set_reinsert_breakpoint): Update declaration.
(delete_reinsert_breakpoints): Likewise.
(reinsert_reinsert_breakpoints): Likewise.
(uninsert_reinsert_breakpoints): Likewise.
(has_reinsert_breakpoints): Likewise.

Refactor clone_all_breakpoints

This patch is to change the interface of clone_all_breakpoints, from
lists of breakpoints and raw_breakpoints to child thread and parent
thread.  I choose child thread to pass because we need the ptid of
the child thread in the following patch.

gdb/gdbserver:

2016-07-21  Yao Qi  <yao.qi@linaro.org>

* inferiors.c (get_thread_process): Make parameter const.
* inferiors.h (get_thread_process): Update declaration.
* mem-break.c (clone_all_breakpoints): Remove all parameters.
Add new parameters child_thread and parent_thread.  Callers
updated.
* mem-break.h (clone_all_breakpoints): Update declaration.

Create sub classes of 'struct breakpoint'

Nowadays, there are three types of breakpoint in GDBserver,

 - gdb breakpoints,
 - reinsert breakpoints, used for software single step,
 - other breakpoints, used for tracepoint,

but we only have one 'struct breakpoint' for all of them.  Some fields
are only useful to one type of breakpoint.  For example, cond_list
and command_list are only used by gdb breakpoints, while handler is
only used by other breakpoints.

This patch changes 'struct breakpoint' to a base class, which has fields
needed by all breakpoint types, also add three sub-classes to
'struct breakpoint' to these three types of breakpoints.

gdb/gdbserver:

2016-07-21  Yao Qi  <yao.qi@linaro.org>

* mem-break.c (struct breakpoint) <cond_list>: Remove.
<command_list, handler>: Remove.
(struct gdb_breakpoint): New.
(struct other_breakpoint): New.
(struct reinsert_breakpoint): New.
(is_gdb_breakpoint): New function.
(any_persistent_commands): Update command_list if
is_gdb_breakpoint returns true.
(set_breakpoint): Create breakpoints according to their types.
(find_gdb_breakpoint): Return 'struct gdb_breakpoint *'.
(set_gdb_breakpoint_1): Likewise.
(set_gdb_breakpoint): Likewise.
(clear_breakpoint_conditions): Change parameter type to
'struct gdb_breakpoint *'.
(clear_breakpoint_commands): Likewise.
(clear_breakpoint_conditions_and_commands): Likewise.
(add_condition_to_breakpoint): Likewise.
(add_breakpoint_condition): Likewise.
(add_commands_to_breakpoint): Likewise.
(check_breakpoints): Check other_breakpoint.
(clone_one_breakpoint): Clone breakpopint according to its type.
* mem-break.h (struct gdb_breakpoint): Declare.
(set_gdb_breakpoint): Update declaration.
(clear_breakpoint_conditions_and_commands): Likewise.
(add_breakpoint_condition): Likewise.
(add_breakpoint_commands): Likewise.
* server.c (process_point_options): Change parameter type to
'struct gdb_breakpoint *'.

Pass breakpoint type in set_breakpoint_at

Nowadays, set_breakpoint_at creates breakpoint of type
other_breakpoint, but we also use set_breakpoint_at
in set_reinsert_breakpoint to create breakpoint, so that
we have to overwrite the breakpoint type like this,

  bp = set_breakpoint_at (stop_at, NULL);
  bp->type = reinsert_breakpoint;

which looks not very good.  This patch changes set_breakpoint_at
to receive breakpoint type.  Since set_breakpoint_at is
used in many places, I rename it to set_breakpoint_type_at, and wrap
it with set_breakpoint_at, and pass other_breakpoint.  In this way,
we can call set_breakpoint_type_at with reinsert_breakpoint in
set_reinsert_breakpoint too, and code looks cleaner.

gdb/gdbserver:

2016-07-21  Yao Qi  <yao.qi@linaro.org>

* mem-break.c (set_breakpoint_at): Rename it to ...
(set_breakpoint_type_at): ... it.
(set_breakpoint_at): Call set_breakpoint_type_at.
(set_reinsert_breakpoint): Call set_breakpoint_type_at.
* mem-break.h (set_breakpoint_at): Update comments.

Skip gdb.server/ tests if lack of XML support

I recently see some gdb.server/*.exp fails in my native gdb testing,
in which libexpat isn't available, so GDB isn't able to parse xml file.
It causes gdb.server/ tests fails because GDB can't get registers
correctly from GDBserver.

(gdb) PASS: gdb.server/connect-without-multi-process.exp: multiprocess=off: break main
target remote localhost:2352^M
Remote debugging using localhost:2352^M
warning: Can not parse XML target description; XML support was disabled at compile time^M
Reading /lib/ld-linux-armhf.so.3 from remote target...^M
warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead.^M
Reading /lib/ld-linux-armhf.so.3 from remote target...^M
Reading symbols from target:/lib/ld-linux-armhf.so.3...Reading /lib/ld-2.17.so.debug from remote target...^M
Reading /lib/.debug/ld-2.17.so.debug from remote target...^M
(no debugging symbols found)...done.^M
Remote 'g' packet reply is too long: 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000efffbe00000000808d0f4d100000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000^
0x4d0f8d80 in _start () from target:/lib/ld-linux-armhf.so.3^M

Without XML support in GDB, it can't parse xml sent by GDBserver, and has
to fall back to the oldest arch.  However, GDBserver doesn't know this
(IMO, this is a defect in RSP), and still choose the right target
description to create regcache and 'g' packet.  If the port only has
one target description or coincidentally two sides choose the same
target description, there is no such issue.  Otherwise, GDB is broken
on read registers.

This patch is to skip gdbserver tests if XML is not support and the
target has multiple target descriptions.

gdb/testsuite:

2016-07-21  Yao Qi  <yao.qi@linaro.org>

* lib/gdbserver-support.exp (skip_gdbserver_tests): Return 1
if gdb_skip_xml_test is true on some targets.

Fix typo fsqrt -> sqrtf.

oops - forgot to include binutils.texi in the previous delta.

Use fsqrt() to calculate float (rather than double) square root.

* simulator.c (fsqrts): Use fsqrt rather than sqrt.

Fix fail in gdb.server/solib-list.exp

If I run single test solib-list.exp, it is OK.  If I run two, as below,
there are fails,

$ make check RUNTESTFLAGS="server-run.exp solib-list.exp"
FAIL: gdb.server/solib-list.exp: non-stop 0: continue (the program exited)
FAIL: gdb.server/solib-list.exp: non-stop 0: p libvar
FAIL: gdb.server/solib-list.exp: non-stop 1: continue (the program exited)
FAIL: gdb.server/solib-list.exp: non-stop 1: p libvar

in gdb.log,

/scratch/yao/gdb/build-git/x86_64/gdb/testsuite/../../gdb/gdbserver/gdbserver --once :2347 /scratch/yao/gdb/build-git/x86_64/gdb/testsuite/outputs/gdb.server/server-run/server-run /lib64/ld-linux-x86-64.so.2 /scratch/yao/gdb/build-git/x86_64/gdb/testsuite/outputs/gdb.server/solib-list/solib-list

server-run is spawned, which is wrong.  If I only run solib-list.exp, ld-linux
is spawned, which is right.

/scratch/yao/gdb/build-git/x86_64/gdb/testsuite/../../gdb/gdbserver/gdbserver --once :2346 /lib64/ld-linux-x86-64.so.2 /scratch/yao/gdb/build-git/x86_64/gdb/testsuite/outputs/gdb.server/solib-list/solib-list

in test, we spawn gdbserver this way,

    # Note we pass ${interp_system}, the program gdbserver spawns, as
    # argument here, instead of using gdb_load, because we don't want
    # to download the interpreter to the target (it's already there)
    # or to the test output directory.
    set res [gdbserver_spawn "${interp_system} ${remote_binfile}"]

in gdbserver_spawn -> gdbserver_download_current_prog, if
last_loaded_file is set (when you run multiple tests), it is
returned.

This patch is to unset last_loaded_file in solib-list.exp.

gdb/testsuite:

2016-07-21  Yao Qi  <yao.qi@linaro.org>

* gdb.server/solib-list.exp: Unset last_loaded_file.

Use variable args in run_ld_link_exec_tests

If the last parameter of a tcl function is "args" then it can take
zero or more arguments.  Make use of this language feature in
run_ld_link_exec_tests.

* testsuite/lib/ld-lib.exp (run_ld_link_exec_tests): Replace
"targets_to_xfail" parameter with "args".
* testsuite/ld-elf/compress.exp: Remove empty list of xfails on
all calls to run_ld_link_exec_tests.
* testsuite/ld-elf/dwarf.exp: Likewise.
* testsuite/ld-elf/indirect.exp: Likewise.
* testsuite/ld-elf/wrap.exp: Likewise.
* testsuite/ld-i386/i386.exp: Likewise.
* testsuite/ld-i386/no-plt.exp: Likewise.
* testsuite/ld-i386/tls.exp: Likewise.
* testsuite/ld-ifunc/ifunc.exp: Likewise.
* testsuite/ld-pie/pie.exp: Likewise.
* testsuite/ld-plugin/lto.exp: Likewise.
* testsuite/ld-size/size.exp: Likewise.
* testsuite/ld-x86-64/mpx.exp: Likewise.
* testsuite/ld-x86-64/no-plt.exp: Likewise.
* testsuite/ld-x86-64/tls.exp: Likewise.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-elf/elf.exp: Likewise.  Reorder args when providing
xfails and simplify lists.
* testsuite/ld-elf/shared.exp: Likewise.

Fix implib test failures

bfd/
* elf.c (_bfd_elf_filter_global_symbols): Skip local symbols.
(swap_out_syms): Return an error when not finding ELF output
section rather than asserting.
* elflink.c (elf_output_implib): Call bfd_set_error on no symbols.
ld/
* testsuite/lib/ld-lib.exp (run_ld_link_tests): Add optional
parameter to pass list of xfails.
* testsuite/ld-elf/elf.exp: Add xfails for implib tests.  Tidy
implib test formatting.  Don't set .data start address.
* testsuite/ld-elf/implib.s: Remove first .bss directive and
replace second one with equivalent .section directive.
* testsuite/ld-elf/empty-implib.out: Add expected final error.
* testsuite/ld-elf/implib.rd: Update.

Automatic date update in version.in

Use a real vfork done event on FreeBSD when available.

FreeBSD 12 recently added a new ptrace event to indicate when the vfork
parent resumes after the child process stops sharing the address space.
Use this event to report a proper TARGET_WAITKIND_VFORK_DONE rather than
faking a vfork done event after a delay.

gdb/ChangeLog:

* fbsd-nat.c (fbsd_enable_proc_events): Enable "PTRACE_VFORK"
events.
(fbsd_pending_vfork_done): Only define if "PTRACE_VFORK" is not
defined.
(fbsd_add_vfork_done): Likewise.
(fbsd_is_vfork_done_pending): Likewise.
(fbsd_next_vfork_done): Likewise.
(fbsd_resume): Only ignore pending vfork done events if
"PTRACE_VFORK" is not defined.
(fbsd_wait): Only look for pending vfork done events if
"PTRACE_VFORK" is not defined.
[PTRACE_VFORK]: Handle "PL_FLAG_VFORKED" and "PL_FLAG_VFORK_DONE"
events.
(fbsd_follow_fork): Only fake a vfork done event if "PTRACE_VFORK"
is not defined.

Enable ptrace events on new child processes.

New child processes on FreeBSD do not inherit optional ptrace events
such as fork and LWP events from the parent process.  Instead,
explicitly enable events on new children when reporting a fork
event.

gdb/ChangeLog:

* fbsd-nat.c (fbsd_wait): Use "fbsd_enable_proc_events" on
new child processes.

Consolidate code to enable optional FreeBSD native target event reporting.

Add a new function to enable optional event reporting for FreeBSD native
targets.  Specifically, use this to enable fork and LWP events.
The bodies of fbsd_enable_follow_fork and fbsd_enable_lwp_events have been
subsumed into the new function.  In addition, use the PT_GET_EVENT_MASK
and PT_EVENT_SET_MASK requests added in FreeBSD 12 when present to enable
these events.

gdb/ChangeLog:

* fbsd-nat.c (fbsd_enable_lwp_events): Remove function.
(fbsd_enable_proc_events): New function.
(fbsd_enable_follow_fork): Remove function.
(fbsd_post_startup_inferior): Use "fbsd_enable_proc_events".
(fbsd_post_attach): Likewise.

Add support to the ARC disassembler for selecting instruction classes.

gas * testsuite/gas/arc/dsp.d: New file.
* testsuite/gas/arc/dsp.s: Likewise.
* testsuite/gas/arc/fpu.d: Likewise.
* testsuite/gas/arc/fpu.s: Likewise.
* testsuite/gas/arc/ext2op.d: Add specific disassembler option.
* testsuite/gas/arc/ext3op.d: Likewise.
* testsuite/gas/arc/tdpfp.d: Likewise.
* testsuite/gas/arc/tfpuda.d: Likewise.

opcodes * arc-dis.c (skipclass): New structure.
(decodelist): New variable.
(is_compatible_p): New function.
(new_element): Likewise.
(skip_class_p): Likewise.
(find_format_from_table): Use skip_class_p function.
(find_format): Decode first the extension instructions.
(print_insn_arc): Select either ARCEM or ARCHS based on elf
e_flags.
(parse_option): New function.
(parse_disassembler_options): Likewise.
(print_arc_disassembler_options): Likewise.
(print_insn_arc): Use parse_disassembler_options function.  Proper
select ARCv2 cpu variant.
* disassemble.c (disassembler_usage): Add ARC disassembler
options.

binutils* doc/binutils.texi (objdump): Add ARC disassembler options.
* testsuite/binutils-all/arc/dsp.s: New file.
* testsuite/binutils-all/arc/objdump.exp: Likewise.

include * dis-asm.h: Declare print_arc_disassembler_options.

Handle version 1a of FreeBSD's NT_PRSINFO.

Version 1a adds a pr_pid member containing the process ID of the
terminating process.  The presence of pr_pid is inferred from the
note's size.

bfd/ChangeLog:

* elf.c (elfcore_grok_freebsd_psinfo): Check for minimum note size
and handle pr_pid if present.

Check p_paddr for program header space

Issue an error if p_paddr becomes invalid when allocating space for
program headers.

PR ld/20376
* elf.c (assign_file_positions_for_load_sections): Also check
p_paddr for program header space.

testsuite: Fix gdb.gdb/selftest.exp for C++-O2-g-built GDB

tested on Fedora 24 x86_64 after:
        ./configure; make
That is: CFLAGS='-g -O2' CXXFLAGS='-g -O2'

FAIL: gdb.gdb/selftest.exp: unknown source line
FAIL: gdb.gdb/selftest.exp: step into xmalloc call

gdb/testsuite/ChangeLog
2016-07-20  Jan Kratochvil  <jan.kratochvil@redhat.com>

* gdb.gdb/selftest.exp (do_steps_and_nexts): Add "next over TRY" and
"step into captured_main (args)".

testsuite: Fix gdb.btrace/tailcall-only.exp errors on x86_64-m32

$ runtest 'CC_FOR_TARGET=gcc -m32' gdb.btrace/tailcall-only.exp
Running ./gdb.btrace/tailcall-only.exp ...
gdb compile failed, tailcall-only.c: Assembler messages:
tailcall-only.c:142: Error: cannot represent relocation type BFD_RELOC_64
[...]
tailcall-only.c:425: Error: cannot represent relocation type BFD_RELOC_64

It works for the other x86 arch combinations:

On Mon, 11 Apr 2016 08:44:23 +0200, Metzger, Markus T wrote:
I'm setting the target triplet to "i686-unknown-linux" in my m32 configuration.
Like this:

set target_triplet "i686-unknown-linux"
set_board_info cflags "-m32"
set_board_info cppflags "-m32"

On Wed, 20 Jul 2016 16:02:20 +0200, Pedro Alves wrote:
There's no reason you should _not_ set it.

But, multilib-style testing with --target_board=unix\{-m64,-m32\} etc.
should work _too_, IMO.

gdb/testsuite/ChangeLog
2016-07-20  Jan Kratochvil  <jan.kratochvil@redhat.com>

* gdb.btrace/tailcall-only.exp: Use is_lp64_target check.

testsuite patch: Skip py-unwind.exp on x86_64 -m32

(gdb) source /home/jkratoch/redhat/gdb-clean/gdb/testsuite/outputs/gdb.python/py-unwind/py-unwind.py^M
Python script imported^M
Python Exception <type 'exceptions.ValueError'> Bad register: ^M
(gdb) FAIL: gdb.python/py-unwind.exp: import python scripts

class TestUnwinder(Unwinder):
    AMD64_RBP = 6
    AMD64_RSP = 7
    AMD64_RIP = 16

On Tue, 19 Jul 2016 12:06:09 +0200, Yao Qi wrote:
py-unwind.exp does nothing on arch specific thing, so py-unwind.exp shouldn't
be aware of the arch difference, but py-unwind.py should.

On Tue, 19 Jul 2016 20:04:33 +0200, Pedro Alves wrote:
How about we handle this in the .exp file for now and leave something
more complicated for when the test is first ported to some other
arch.  WDYT?

gdb/testsuite/ChangeLog
2016-07-20  Jan Kratochvil  <jan.kratochvil@redhat.com>

* gdb.python/py-unwind.exp: Test also ![is_lp64_target].

MIPS/GAS: Remove erroneous ELF relocation references

Remove R_MIPS_PC26_S2 and R_MIPS_PC21_S2 relocation references that went
into `mips_force_relocation' with commit 9d862524f6ae ("MIPS: Verify the
ISA mode and alignment of branch and jump targets") by mistake.  Their
BFD_RELOC_MIPS_26_PCREL_S2 and BFD_RELOC_MIPS_21_PCREL_S2 equivalents
are already handled there.

gas/
* config/tc-mips.c (mips_force_relocation): Remove
R_MIPS_PC26_S2 and R_MIPS_PC21_S2.

Update documentation to reflect that the symbol localization options of objcopy do not affect unique symbols.

* doc/binutils.texi (objcopy): Note that the localize symbol
options do not affect unique symbols.

Enable the configuration of GDB for the NDS32 target.

    * configure.ac (nds32*-*-*): Remove entry to enable gdb.
    * configure: Regenerated.

Early expression evaluation

Folding a constant expression early can lead to loss of tokens, eg.
ABSOLUTE, that are significant in ld's horrible context sensitive
expression evaluation.  Also, MAXPAGESIZE and other "constants" may
not have taken values specified on the command line, leading to the
wrong value being cached.

* ldexp.c (exp_unop, exp_binop, exp_trinop, exp_nameop): Don't
fold expression.
* testsuite/ld-elf/maxpage3b.d: Expect correct maxpagesize.

Mark some more powerpc relocs as not handled by generic linker

* elf64-ppc.c (ppc64_elf_howto_raw <R_PPC64_PLTREL32>): Put
ppc64_elf_unhandled_reloc for special_function.
* elf32-ppc.c (ppc_elf_howto_raw): Similarly for lots of relocs.

Automatic date update in version.in

Support -pie for aarch64*-elf targets.

ld/
* emulparams/aarch64elf.sh (GENERATE_PIE_SCRIPT): Set to yes.
* emulparams/aarch64elf32.sh: Likewise.

Build gdb.opt/inline-*.exp tests at -O0, rely on __attribute__((always_inline))

A test recently added to gdb.opt/inline-cmds.exp fails for
arm-none-eabi targets because -O2 leads to instructions to be
reordered widely.

I guess it might have made sense years ago to enable optimization in
these tests, but I fail to see the need for that nowadays.

Using -O0 while relying on __attribute__((always_inline)), which is
already used in the tests [1] [2], avoids this sort of trouble, while
still exercising the inlining-related use cases that are the focus of
these tests.

I think that nowadays we can safely assume that all compilers we care
about support __attribute__((always_inline)) or similar.

[1] - Except one spot that missed it.

[2] - Note that the .exp files make sure the frames that should have
      been inlined are indeed inlined, with "info frame".

gdb/testsuite/ChangeLog:
2016-07-19  Pedro Alves  <palves@redhat.com>

* gdb.opt/inline-break.exp: Remove optimize=-O2.
* gdb.opt/inline-bt.exp: Likewise.
* gdb.opt/inline-cmds.exp: Remove optimize=-O2 and add
additional_flags=-Winline.
* gdb.opt/inline-locals.exp: Likewise.
* gdb.opt/inline-markers.c (ATTR): Define.
(inlined_fn): Use it.

MIPS: Convert cross-mode BAL to JALX

Convert cross-mode regular MIPS and microMIPS BAL instructions to JALX,
similarly to how JAL instructions are converted.

bfd/
* elfxx-mips.c (mips_elf_perform_relocation): Convert cross-mode
BAL to JALX.
(_bfd_mips_elf_relocate_section) <bfd_reloc_outofrange>: Add a
corresponding error message.

gas/
* config/tc-mips.c (mips_force_relocation, mips_fix_adjustable):
Adjust comments for BAL to JALX linker conversion.
(fix_bad_cross_mode_branch_p): Accept cross-mode BAL.
* testsuite/gas/mips/unaligned-branch-1.l: Update error messages
expected.
* testsuite/gas/mips/unaligned-branch-micromips-1.l: Likewise.
* testsuite/gas/mips/branch-local-4.d: New test.
* testsuite/gas/mips/branch-local-n32-4.d: New test.
* testsuite/gas/mips/branch-local-n64-4.d: New test.
* testsuite/gas/mips/branch-addend.d: New test.
* testsuite/gas/mips/branch-addend-n32.d: New test.
* testsuite/gas/mips/branch-addend-n64.d: New test.
* testsuite/gas/mips/branch-local-4.s: New test source.
* testsuite/gas/mips/branch-addend.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.

ld/
* testsuite/ld-mips-elf/unaligned-branch-2.d: Update error
messages expected.
* testsuite/ld-mips-elf/unaligned-branch-r6-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-branch-mips16.d: Likewise.
* testsuite/ld-mips-elf/unaligned-branch-micromips.d: Likewise.
* testsuite/ld-mips-elf/bal-jalx-addend.d: New test.
* testsuite/ld-mips-elf/bal-jalx-local.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic.d: New test.
* testsuite/ld-mips-elf/bal-jalx-addend-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-local-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-n32.d: New test.
* testsuite/ld-mips-elf/bal-jalx-addend-n64.d: New test.
* testsuite/ld-mips-elf/bal-jalx-local-n64.d: New test.
* testsuite/ld-mips-elf/bal-jalx-pic-n64.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-2.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-3.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-addend-2.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-addend-3.d: New test.
* testsuite/ld-mips-elf/unaligned-jalx-2.s: New test source.
* testsuite/ld-mips-elf/unaligned-jalx-3.s: New test source.
* testsuite/ld-mips-elf/unaligned-jalx-addend-2.s: New test
source.
* testsuite/ld-mips-elf/unaligned-jalx-addend-3.s: New test
source.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.

MIPS: Verify the ISA mode and alignment of branch and jump targets

Verify that the ISA mode of branch targets is the same as the referring
relocation, so that an attempt to produce a branch between instructions
encoded in different ISA modes each causes an error rather than silently
producing non-functional code.  Make sure that no symbol or addend bits
are silently truncated: terminate with an error if the relocation value
calculated cannot be encoded in the relocatable field of a branch; for
REL targets also applying to any intermediate addend.

Also make jump target's alignment verification consistent with that for
branches.

This change will require an update to some obscure handcoded assembly
sources which make branches to labels placed at data objects, however
for microMIPS code only.  These labels will have to be updated with the
`.insn' directive for containing code to assemble and link successfully.
Such code is broken as any such labels have always been required by the
microMIPS architecture specification[1][2] to be annotated this way for
correct interpretation, and with our old code missing `.insn' directives
caused labels to present different semantics depending on whether they
were referred with branch (ISA bit ignored) or other relocations (ISA
bit respected).

Enforcing these checks however will ensure errors in building software,
like mixed regular MIPS and microMIPS code links with branches between,
will be diagnosed at the build time rather than causing odd run-time
errors such as intermittent crashes.  It will also let cross-mode BAL
instructions be converted to JALX instructions, with a separate change.

References:

[1] "MIPS Architecture for Programmers, Volume II-B: The microMIPS32
    Instruction Set", MIPS Technologies, Inc., Document Number: MD00582,
    Revision 5.04, January 15, 2014, Section 7.1 "Assembly-Level
    Compatibility", p. 533

[2] "MIPS Architecture for Programmers, Volume II-B: The microMIPS64
    Instruction Set", MIPS Technologies, Inc., Document Number: MD00594,
    Revision 5.04, January 15, 2014, Section 8.1 "Assembly-Level
    Compatibility", p. 623

bfd/
* elfxx-mips.c (b_reloc_p): Add R_MICROMIPS_PC16_S1,
R_MICROMIPS_PC10_S1 and R_MICROMIPS_PC7_S1.
(branch_reloc_p): New function.
(mips_elf_calculate_relocation): Handle ISA mode determination
for relocations against section symbols, against absolute
symbols and absolute relocations.  Also set `*cross_mode_jump_p'
for branches.
<R_MIPS16_26, R_MIPS_26, R_MICROMIPS_26_S1>: Suppress alignment
checks for weak undefined symbols.  Also check target alignment
within the same ISA mode.
<R_MIPS_PC16, R_MIPS_GNU_REL16_S2>: Handle cross-mode branches
in the alignment check.
<R_MICROMIPS_PC7_S1>: Add an alignment check.
<R_MICROMIPS_PC10_S1>: Likewise.
<R_MICROMIPS_PC16_S1>: Likewise.
(mips_elf_perform_relocation): Report a failure for unsupported
same-mode JALX instructions and cross-mode branches.
(_bfd_mips_elf_relocate_section) <bfd_reloc_outofrange>: Add
error messages for jumps to misaligned addresses.

gas/
* config/tc-mips.c (mips_force_relocation): Also retain branch
relocations against MIPS16 and microMIPS symbols.
(fix_bad_cross_mode_jump_p): New function.
(fix_bad_same_mode_jalx_p): Likewise.
(fix_bad_misaligned_jump_p): Likewise.
(fix_bad_cross_mode_branch_p): Likewise.
(fix_bad_misaligned_branch_p): Likewise.
(fix_validate_branch): Likewise.
(md_apply_fix) <BFD_RELOC_MIPS_JMP, BFD_RELOC_MIPS16_JMP>
<BFD_RELOC_MICROMIPS_JMP>: Separate from BFD_RELOC_MIPS_SHIFT5,
etc.  Verify the ISA mode and alignment of the jump target.
<BFD_RELOC_MIPS_21_PCREL_S2>: Replace the inline alignment check
with a call to `fix_validate_branch'.
<BFD_RELOC_MIPS_26_PCREL_S2>: Likewise.
<BFD_RELOC_16_PCREL_S2>: Likewise.
<BFD_RELOC_MICROMIPS_7_PCREL_S1, BFD_RELOC_MICROMIPS_10_PCREL_S1>
<BFD_RELOC_MICROMIPS_16_PCREL_S1>: Retain the original addend.
Verify the ISA mode and alignment of the branch target.
(md_convert_frag): Verify the ISA mode and alignment of resolved
MIPS16 branch targets.
* testsuite/gas/mips/branch-misc-1.s: Annotate non-instruction
branch targets with `.insn'.
* testsuite/gas/mips/branch-misc-5.s: Likewise.
* testsuite/gas/mips/micromips@branch-misc-5-64.d: Update
accordingly.
* testsuite/gas/mips/micromips@branch-misc-5pic-64.d: Likewise.
* testsuite/gas/mips/micromips-branch-relax.s: Annotate
non-instruction branch target with `.insn'.
* testsuite/gas/mips/micromips.s: Replace microMIPS JALX targets
with external symbols.
* testsuite/gas/mips/micromips-insn32.d: Update accordingly.
* testsuite/gas/mips/micromips-noinsn32.d: Likewise.
* testsuite/gas/mips/micromips-trap.d: Likewise.
* testsuite/gas/mips/micromips.d: Likewise.
* testsuite/gas/mips/mips16.s: Annotate non-instruction branch
targets with `.insn'.
* testsuite/gas/mips/mips16.d: Update accordingly.
* testsuite/gas/mips/mips16-64.d: Likewise.
* testsuite/gas/mips/mips16-dwarf2.s: Annotate non-instruction
branch target with `.insn'.
* testsuite/gas/mips/relax-swap3.s: Likewise.
* testsuite/gas/mips/branch-local-2.l: New list test.
* testsuite/gas/mips/branch-local-3.l: New list test.
* testsuite/gas/mips/branch-local-n32-2.l: New list test.
* testsuite/gas/mips/branch-local-n32-3.l: New list test.
* testsuite/gas/mips/branch-local-n64-2.l: New list test.
* testsuite/gas/mips/branch-local-n64-3.l: New list test.
* testsuite/gas/mips/unaligned-jump-1.l: New list test.
* testsuite/gas/mips/unaligned-jump-2.l: New list test.
* testsuite/gas/mips/unaligned-jump-3.d: New test.
* testsuite/gas/mips/unaligned-jump-mips16-1.l: New list test.
* testsuite/gas/mips/unaligned-jump-mips16-2.l: New list test.
* testsuite/gas/mips/unaligned-jump-mips16-3.d: New test.
* testsuite/gas/mips/unaligned-jump-micromips-1.l: New list
test.
* testsuite/gas/mips/unaligned-jump-micromips-2.l: New list
test.
* testsuite/gas/mips/unaligned-jump-micromips-3.d: New test.
* testsuite/gas/mips/unaligned-branch-1.l: New list test.
* testsuite/gas/mips/unaligned-branch-2.l: New list test.
* testsuite/gas/mips/unaligned-branch-3.d: New test.
* testsuite/gas/mips/unaligned-branch-r6-1.l: New list test.
* testsuite/gas/mips/unaligned-branch-r6-2.l: New list test.
* testsuite/gas/mips/unaligned-branch-r6-3.l: New list test.
* testsuite/gas/mips/unaligned-branch-r6-4.l: New list test.
* testsuite/gas/mips/unaligned-branch-r6-5.d: New test.
* testsuite/gas/mips/unaligned-branch-r6-6.d: New test.
* testsuite/gas/mips/unaligned-branch-mips16-1.l: New list test.
* testsuite/gas/mips/unaligned-branch-mips16-2.l: New list test.
* testsuite/gas/mips/unaligned-branch-mips16-3.d: New test.
* testsuite/gas/mips/unaligned-branch-micromips-1.l: New list
test.
* testsuite/gas/mips/unaligned-branch-micromips-2.l: New list
test.
* testsuite/gas/mips/unaligned-branch-micromips-3.d: New test.
* testsuite/gas/mips/branch-local-2.s: New test source.
* testsuite/gas/mips/branch-local-3.s: New test source.
* testsuite/gas/mips/branch-local-n32-2.s: New test source.
* testsuite/gas/mips/branch-local-n32-3.s: New test source.
* testsuite/gas/mips/branch-local-n64-2.s: New test source.
* testsuite/gas/mips/branch-local-n64-3.s: New test source.
* testsuite/gas/mips/unaligned-jump-1.s: New test source.
* testsuite/gas/mips/unaligned-jump-2.s: New test source.
* testsuite/gas/mips/unaligned-jump-mips16-1.s: New test source.
* testsuite/gas/mips/unaligned-jump-mips16-2.s: New test source.
* testsuite/gas/mips/unaligned-jump-micromips-1.s: New test
source.
* testsuite/gas/mips/unaligned-jump-micromips-2.s: New test
source.
* testsuite/gas/mips/unaligned-branch-1.s: New test source.
* testsuite/gas/mips/unaligned-branch-2.s: New test source.
* testsuite/gas/mips/unaligned-branch-r6-1.s: New test source.
* testsuite/gas/mips/unaligned-branch-r6-2.s: New test source.
* testsuite/gas/mips/unaligned-branch-r6-3.s: New test source.
* testsuite/gas/mips/unaligned-branch-r6-4.s: New test source.
* testsuite/gas/mips/unaligned-branch-mips16-1.s: New test
source.
* testsuite/gas/mips/unaligned-branch-mips16-2.s: New test
source.
* testsuite/gas/mips/unaligned-branch-micromips-1.s: New test
source.
* testsuite/gas/mips/unaligned-branch-micromips-2.s: New test
source.
* testsuite/gas/mips/mips.exp: Run the new tests.

ld/
* testsuite/ld-mips-elf/unaligned-jalx-1.d: Update error message
expected.
* testsuite/ld-mips-elf/unaligned-jalx-addend-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-addend-mips16-1.d:
Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-addend-micromips-1.d:
Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-mips16-1.d: Likewise.
* testsuite/ld-mips-elf/unaligned-jalx-micromips-1.d: Likewise.
* testsuite/ld-mips-elf/undefweak-overflow.s: Add jumps,
microMIPS BAL and MIPS16 instructions.
* testsuite/ld-mips-elf/undefweak-overflow.d: Update
accordingly.
* testsuite/ld-mips-elf/unaligned-branch-2.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-r6-1.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-r6-2.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-mips16.d: New test.
* testsuite/ld-mips-elf/unaligned-branch-micromips.d: New test.
* testsuite/ld-mips-elf/unaligned-jump-mips16.d: New test.
* testsuite/ld-mips-elf/unaligned-jump-micromips.d: New test.
* testsuite/ld-mips-elf/unaligned-jump.d: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new tests.

make the type of nds32_pseudo_opcode::pseudo_val  unsigned

It can be initialized with values greater than 0x80000000, which don't fit in a
signed int.  Further it appears to be used as a set of bit flags where unsigned
int is more typical.

gas/ChangeLog:

2016-07-19  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

* config/tc-nds32.c (struct nds32_pseudo_opcode): Make pseudo_val
unsigned int.
(do_pseudo_b): Adjust.
(do_pseudo_bal): Likewise.
(do_pseudo_bge): Likewise.
(do_pseudo_bges): Likewise.
(do_pseudo_bgt): Likewise.
(do_pseudo_bgts): Likewise.
(do_pseudo_ble): Likewise.
(do_pseudo_bles): Likewise.
(do_pseudo_blt): Likewise.
(do_pseudo_blts): Likewise.
(do_pseudo_br): Likewise.
(do_pseudo_bral): Likewise.
(do_pseudo_la): Likewise.
(do_pseudo_li): Likewise.
(do_pseudo_ls_bhw): Likewise.
(do_pseudo_ls_bhwp): Likewise.
(do_pseudo_ls_bhwpc): Likewise.
(do_pseudo_ls_bhwi): Likewise.
(do_pseudo_move): Likewise.
(do_pseudo_neg): Likewise.
(do_pseudo_not): Likewise.
(do_pseudo_pushpopm): Likewise.
(do_pseudo_pushpop): Likewise.
(do_pseudo_v3push): Likewise.
(do_pseudo_v3pop): Likewise.
(do_pseudo_pushpop_stack): Likewise.
(do_pseudo_push_bhwd): Likewise.
(do_pseudo_pop_bhwd): Likewise.
(do_pseudo_pusha): Likewise.
(do_pseudo_pushi): Likewise.

sparc: make a field type bfd_reloc_code_real_type

gas/ChangeLog:

2016-07-19  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

* config/tc-sparc.c (struct pop_entry): Make the type of reloc
bfd_reloc_code_real_type.

sparc: remove a sentinal

gas/ChangeLog:

2016-07-19  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

* config/tc-sparc.c (pop_table): Remove sentinel.
(NUM_PERC_ENTRIES): Use ARRAY_SIZE on pop_table.
(md_begin): Adjust.

tc-z8k.c: make some argument types bfd_reloc_code_real_type

gas/ChangeLog:

2016-07-19  Trevor Saunders  <tbsaunde+binutils@tbsaunde.org>

* config/tc-z8k.c (newfix): Make type of type argument
bfd_reloc_code_real_type.
(apply_fix): Likewise.

Use do_self_tests in selftest.exp

This patch uses do_self_tests to simplify selftest.exp.  It doesn't
change the tests except the order,

-PASS: gdb.gdb/selftest.exp: Disassemble main
 PASS: gdb.gdb/selftest.exp: breakpoint in captured_main
+PASS: gdb.gdb/selftest.exp: run until breakpoint at captured_main
+PASS: gdb.gdb/selftest.exp: Disassemble main
 PASS: gdb.gdb/selftest.exp: set interrupt character in test_with_self
 PASS: gdb.gdb/selftest.exp: set listsize to 1
-PASS: gdb.gdb/selftest.exp: run until breakpoint at captured_main

gdb/testsuite:

2016-07-19  Yao Qi  <yao.qi@linaro.org>

* gdb.gdb/selftest.exp: Remove checks on is_remote and isnative.
(test_with_self): Remove some code.  Remove argument executable.
(top-level): Use do_self_tests.

ld: Restore file offset after a plugin fails to claim a file

When using the plugin interface to claim an input file the claim method
from (possible) many plugins can be called on an input file.  If these
claim methods read content from the input file then the file offset
stored in the underlying file descriptor will change.

As we share a file descriptor between the plugin interface (created with
dup in ld/plugin.c:plugin_object_p) and the input bfd object, then any
changes to the file offset in the file descriptor will effect the bfd
object.  Also, as the changes to the file offset did not originate from
calls through the bfd interface, but instead came from the plugin
directly, then the bfd will not be aware that the file offset has
changed.  This is a problem as the bfd library caches the file offset.
If the plugin decides not to claim an input file then, currently, we
leave the bfd in a state where the actual file offset is out of sync
with the cached file offset.

This problem came to light after a recent commit
7d0b9ebc1e0079271a7c7737b53bc026525eab64 (Don't include libbfd.h outside
of bfd, part 6) however, I don't believe that commit actual introduces
the bug, it just exposed the existing issue.

This commit solves the problem by backing up and restoring the file
offset for the file descriptor of the input file.  The restore is only
done if the plugin does not claim the input file, as it is in this case
that the bfd library might be used again to try and identify the
unclaimed file.

ld/ChangeLog:

* plugin.c (plugin_call_claim_file): Restore the file offset after
an unsuccessful attempt to claim a file.
* testplug.c (bytes_to_read_before_claim): New global.
(record_read_length): New function, sets new global
bytes_to_read_before_claim.
(parse_option): Handle 'read:<NUMBER>' option.
(onclaim_file): Read file content before checking for claim.
* testsuite/ld-plugin/plugin-30.d: New file.
* testsuite/ld-plugin/plugin.exp: Add new test.

Update PC when simulate break instruction.

PR target/ 19401
* avr/interp.c (step_once): Pass break instruction address to
sim_engine_halt function which writes that to PC. Remove code that
follows that function call as it is unreachable.

Automatic date update in version.in

Automatic date update in version.in

Automatic date update in version.in

Don't include libbfd.h outside of bfd, part 6

Some messing with plugin code in order to not need arelt_size in
ld code.  File descriptor handling in ld/plugin.c is tidied too,
simply duping the open fd rather than opening the file again.

bfd/
* elflink.c: Include plugin-api.h.
* plugin.c (bfd_plugin_open_input): New function, extracted from..
(try_claim): ..here.
* plugin.h: Don't include bfd.h.
(bfd_plugin_open_input): Declare.
binutils/
* ar.c: Include plugin-api.h.
* nm.c: Likewise.
ld/
* plugin.c: Don't include libbfd.h.  Include plugin-api.h
before bfd/plugin.h.
(plugin_object_p): Use bfd_plugin_open_input.

Don't include libbfd.h outside of bfd, part 5

A rewrite of the code in bucomm.c supporting objdump -i, to use
bfd_iterate_over_targets rather than accessing bfd_target_vector
directly.  Calculates widest arch string rather than using an
out of date constant.  Stashes info from the first display of valid
target/arch combinations for use in second tabular display.

binutils/
* bucomm.c: Don't include libbfd.h.
(endian_string, display_target_list): Delete forward declaration.
(display_info_table, display_target_tables): Likewise.
(LONGEST_ARCH): Delete.
(struct display_target): New.
(do_display_target): New function.
(display_target_list, display_info): Rewrite functions.
(display_info_table): Delete.
(do_info_size, do_info_header, do_info_row): New functions.

Don't include libbfd.h outside of bfd, part 4

Not much to see here, just renaming a function.

bfd/
* targets.c (bfd_seach_for_target): Rename to..
(bfd_iterate_over_targets): ..this.  Rewrite doc.
* bfd-in2.h: Regenerate.
ld/
* ldlang.c (open_output): Replace bfd_search_for_target with
bfd_iterate_over_targets.  Localize vars.

Don't include libbfd.h outside of bfd, part 3

Fix od-macho.c to use a leb128 function from binutils/dwarf.c rather
than one from bfd/libbfd.c.

binutils/
* elfcomm.h (HOST_WIDEST_INT): Move to..
* sysdep.h: ..here.
* od-macho.c: Don't include libbfd.h.  Do include dwarf.h
(dump_dyld_info_rebase): Use read_leb128 rather than
read_unsigned_leb128.
(dump_dyld_info_bind, dump_dyld_info_export_1): Likewise.
(dump_segment_split_info): Likewise.
(dump_dyld_info): Rename vars to avoid shadowing dwarf.h enums.
(dump_load_command): Likewise.

Don't include libbfd.h outside of bfd, part 2

Make bfd_default_set_arch_mach available to a bunch of gas backend
files.

bfd/
* archures.c (bfd_default_set_arch_mach): Make available in bfd.h.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
gas/
* config/tc-epiphany.c: Don't include libbfd.h.
* config/tc-frv.c: Likewise.
* config/tc-ip2k.c: Likewise.
* config/tc-iq2000.c: Likewise.
* config/tc-m32c.c: Likewise.
* config/tc-mep.c: Likewise.
* config/tc-mt.c: Likewise.
* config/tc-nios2.c: Likewise.

Don't include libbfd.h outside of bfd, part 1

Make BFD_ALIGN available to objcopy.  Fix assertions.  Don't use
bfd_log2 in ppc32elf.em or bfd_malloc in xtensaelf.em and bucomm.c.

bfd/
* libbfd-in.h (BFD_ALIGN): Move to..
* bfd-in.h: ..here.
* elf32-ppc.h (struct ppc_elf_params): Add pagesize.
* elf32-ppc.c (default_params): Adjust init.
(ppc_elf_link_params): Set pagesize_p2.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
binutils/
* ar.c: Don't include libbfd.h.
* objcopy.c: Likewise.
* bucomm.c (bfd_get_archive_filename): Use xmalloc rather than
bfd_malloc.
gas/
* config/bfin-parse.y: Don't include libbfd.h.
* config/tc-bfin.c: Likewise.
* config/tc-rl78.c: Likewise.
* config/tc-rx.c: Likewise.
* config/tc-metag.c: Likewise.
(create_dspreg_htabs, create_scond_htab): Use gas_assert not BFD_ASSERT.
* Makefile.am: Update dependencies.
* Makefile.in: Regenerate.
ld/
* ldlang.c: Don't include libbfd.h.
* emultempl/nds32elf.em: Likewise.
* emultempl/ppc64elf.em: Likewise.
* emultempl/ppc32elf.em: Likewise.
(pagesize): Delete.
(params): Update init.
(ppc_after_open_output): Use params.pagesize.  Don't call bfd_log2.
(PARSE_AND_LIST_ARGS_CASES): Use params.pagesize.
* emultempl/sh64elf.em: Don't include libbfd.h.
(after_allocation): Use ASSERT, not BFD_ASSERT.
* emultempl/xtensaelf.em: Don't include libbfd.h.
(replace_insn_sec_with_prop_sec): Use xmalloc, not bfd_malloc.
* Makefile.am: Update dependencies.
* Makefile.in: Regenerate.

Automatic date update in version.in

GDB testsuite: Escape paths used in regular expressions

This patch fixes problems with a few GDB testsuites when executing in a
path that contains special characters (e.g. "++").  When such paths are
used as a regular expression, the regular expression parser will choke
and cause the tests to fail.  This patch uses string_to_regexp to
escape strings that will be used as regular expressions, in order to
sanitize path names used in expect scripts.

2016-07-15  Zachary Welch  <zwelch@codesourcery.com>
    Don Breazeal <donb@codesourcery.com>

gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: Escape paths used in regular expressions.
* gdb.stabs/weird.exp: Likewise.

Add support for creating ELF import libraries

2016-07-15  Thomas Preud'homme  <thomas.preudhomme@arm.com>

bfd/
* elf-bfd.h (elf_backend_filter_implib_symbols): Declare backend hook.
(_bfd_elf_filter_global_symbols): Declare.
* elf.c (_bfd_elf_filter_global_symbols): New function.
* elflink.c (elf_filter_global_symbols): Likewise.
(elf_output_implib): Likewise.
(bfd_elf_final_link): Call above function, failing if it does.
* elfxx-target.h (elf_backend_filter_implib_symbols): Define macro and
default it to NULL.
(elf_backend_copy_indirect_symbol): Fix spacing.
(elf_backend_hide_symbol): Likewise.
(elfNN_bed): Initialize elf_backend_filter_implib_symbols backend hook.

include/
* bfdlink.h (struct bfd_link_info): Declare new ldscript_def and
out_implib_bfd fields.

2016-07-15  Thomas Preud'homme  <thomas.preudhomme@arm.com>
    Nick Clifton  <nickc@redhat.com>

ld/
* emultempl/elf32.em (gld${EMULATION_NAME}_after_open): Open import
library file for writing and initialize implib_bfd field of link_info
structure.
* emultempl/pe.em (pe_implib_filename): Remove variable declaration.
(OPTION_IMPLIB_FILENAME): Remove macro definition.
(gld${EMULATION_NAME}_add_options): Remove --out-implib option.
(gld_${EMULATION_NAME}_list_options): Likewise.
(gld${EMULATION_NAME}_handle_option): Likewise.
(gld_${EMULATION_NAME}_finish): Use command_line.out_implib_filename
instead of pe_implib_filename.
* emultempl/pep.em (pep_implib_filename): Remove variable declaration.
(OPTION_IMPLIB_FILENAME): Remove enumerator.
(gld${EMULATION_NAME}_add_options): Remove --out-implib option.
(gld_${EMULATION_NAME}_list_options): Likewise.
(gld${EMULATION_NAME}_handle_option): Likewise.
(gld_${EMULATION_NAME}_finish): Use command_line.out_implib_filename
instead of pep_implib_filename.
* ld.h (args_type): Declare new out_implib_filename field.
* ld.texinfo (--out-implib): Move documentation to arch-independent
part and rephrase to apply to ELF targets.
* ldexp.c (exp_fold_tree_1): Set ldscript_def field to 1 for symbols
defined in linker scripts.
* ldlex.h (enum option_values): Declare new OPTION_OUT_IMPLIB
enumerator.
* lexsup.c (ld_options): Add entry for new --out-implib switch.
(parse_args): Handle OPTION_OUT_IMPLIB case.
* testsuite/ld-elf/elf.exp (Generate empty import library): New test.
(Generate import library): Likewise.
* testsuite/ld-elf/implib.s: Likewise.
* testsuite/ld-elf/implib.rd: New file.
* testsuite/ld-elf/empty-implib.out: Likewise

Pass SIGLIBRT directly to child processes.

FreeBSD's librt uses SIGLIBRT as an internal signal to implement
SIGEV_THREAD sigevent notifications.  Similar to SIGLWP or SIGCANCEL
this signal should be passed through to child processes by default.

include/ChangeLog:

* signals.def: Add GDB_SIGNAL_LIBRT.

gdb/ChangeLog:

* common/signals.c (gdb_signal_from_host): Handle SIGLIBRT.
(do_gdb_signal_to_host): Likewise.
* infrun.c (_initialize_infrun): Pass GDB_SIGNAL_LIBRT through to
programs.
* proc-events.c (signal_table): Add entry for SIGLIBRT.

Tidy up debugging in the ARC port of the BFD library.

bfd * elf32-arc.c (PR_DEBUG): Delete.
Fix printing of debug information.  Fix formatting of debug
statements.
(debug_arc_reloc): Handle symbols that are not from an input file.
(arc_do_relocation): Remove excessive exclamation points.
(elf_arc_relocate_section): Print an informative message if the
relocation fails, even if debugging is not enabled.
* arc-got.h: Fix formatting.  Fix printing of debug information.
(new_got_entry_to_list): Use xmalloc.
* config.bfd: use the big-endian arc vector as the default vector
for big-endian arc targets.

ld * testsuite/ld-arc/arc.exp: Always run the sda-relocs test in
little endian mode.